What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 62 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 62of 112

5110-22-605-3506
Scraper Blade

226053506
8611400: RNCC: 3 | RNVC: 2

31 Oct 2003

5110-66-013-9864
Hand Reamer

660139864
HAND REAMER: RNCC: 3 | RNVC: 1
650 5062: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-21-847-6834
Diagonal Cutting Pliers

218476834
14NIC: RNCC: 3 | RNVC: 2

4 Jun 1968

5110-14-292-8616

5110-99-607-2148

5110-25-102-6352

5110-21-639-6527
Ratchet Bit Brace

216396527
732A: RNCC: 3 | RNVC: 1
02-923: RNCC: 3 | RNVC: 2
GGGB671: RNCC: 4 | RNVC: 1
171-10 IN: RNCC: 5 | RNVC: 2
N002-742: RNCC: 5 | RNVC: 2
923: RNCC: 5 | RNVC: 9
13-501: RNCC: 5 | RNVC: 9
REVF: RNCC: 5 | RNVC: 9
1F10800: RNCC: 5 | RNVC: 9

19 Aug 1964

5110-21-801-0525
Dovetail Saw

218010525
310: RNCC: 3 | RNVC: 2
68: RNCC: 3 | RNVC: 2
46-GP-4: RNCC: 4 | RNVC: 1
25: RNCC: 5 | RNVC: 9
1F113710: RNCC: 6 | RNVC: 9

5 Feb 1964

5110-99-910-5280
Scraping Knife

999105280
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H1510: RNCC: 6 | RNVC: 9
H1510: RNCC: 6 | RNVC: 9
FA14950: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-230-5624
Leva Meccanici

152305624
1704/400: RNCC: 3 | RNVC: 2

19 Jul 2007

5110-12-361-6082
Cable Stripper Blade

123616082
OK-3907-28B: RNCC: 3 | RNVC: 2

23 Oct 2003

5110-98-200-4318
Hand Reamer

982004318
NO PRIMARY REF 98-200-4318: RNCC: 3 | RNVC: 2
S3S16497-000: RNCC: 5 | RNVC: 2

9 Jun 1986

5110-15-197-0454
Pliers

151970454
PN UAS 00022872: RNCC: 3 | RNVC: 2
5110F76009547: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-33-210-3331
Hand File

332103331
2152: RNCC: 3 | RNVC: 2

3 Aug 2012

5110-12-385-2912
Oval Cutting Punch

123852912
50.000.114: RNCC: 3 | RNVC: 2

18 May 2011

5110-99-445-9607

5110-15-205-1929
Scalpello Largo 32X

152051929
P-13487: RNCC: 3 | RNVC: 2
(241)AA785P-13487: RNCC: 5 | RNVC: 2

24 Feb 2012

5110-32-001-1954
Pocket Knife

320011954
DSTA-PR/GE/K/0007B: RNCC: 2 | RNVC: 2
SAF-DR-K-0017: RNCC: 5 | RNVC: 9
DMO/GED/K/0007A: RNCC: 5 | RNVC: 9
DSTA-PR/GE/K/0007B: RNCC: 6 | RNVC: 9

11 Nov 1976

5110-98-205-3880
Hand File

982053880
DFAMPD00078/MARKING: RNCC: 2 | RNVC: 2
DFAMPD00078/H: RNCC: 3 | RNVC: 2

29 Jun 2000

5110-15-122-7966
Tronchese 188 140

151227966
188002: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-13-109-0126
Hand File Set

131090126
3052003025: RNCC: 3 | RNVC: 2
OREA50: RNCC: 5 | RNVC: 2

1 Apr 1975

5110-15-074-7489
Bracciolo

150747489
38868-400: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-071-3390
Linea Piatta

150713390
1014Y136: RNCC: 3 | RNVC: 2

31 Dec 1978

5110-15-169-8740
Adz

151698740
F72019417: RNCC: 3 | RNVC: 2

5 Nov 2002

5110-15-230-5388
Lima Triangolare Ta

152305388
1719A/T: RNCC: 3 | RNVC: 2

19 Jul 2007

5110-15-230-4034
Lima Mezzatonda

152304034
2561/1/8: RNCC: 3 | RNVC: 2
511015E065337: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-17-015-5845
Hand File

170155845
TVA5110-2-263-006-1.1.6: RNCC: 3 | RNVC: 2
TVA5110-2-263-006: RNCC: 5 | RNVC: 1
12500402: RNCC: 5 | RNVC: 2
1167: RNCC: 5 | RNVC: 9

17 Jun 1972

5110-14-270-3958

5110-14-244-0653

5110-14-270-3953

5110-17-123-3954
Rigid Handle Machete

171233954
MAG392244: RNCC: 3 | RNVC: 2

28 Oct 2010

5110-99-433-4433
Glass Cutter

994334433
K5A: RNCC: 3 | RNVC: 2
0273-13249: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-262-2654

5110-21-889-5308
Cable Stripper

218895308
TD487R-1: RNCC: 3 | RNVC: 2

9 May 1982

5110-14-490-8856
Alesoir

144908856
4067 010 001 862: RNCC: 3 | RNVC: 2
F300 0T 000 5128: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-14-305-6058

5110-22-221-6486

5110-22-112-6355
12 Nedstrygerklinge

221126355
921210-32: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-15-230-4030
Lima Tonda

152304030
2562/2/4: RNCC: 3 | RNVC: 2
511015E065333: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-25-116-3600
Bow Saw

251163600
FS 5110-0694 POS 1: RNCC: 2 | RNVC: 2
914MMFS5110-0694: RNCC: 2 | RNVC: 2
B3FT: RNCC: 3 | RNVC: 2
41-6956-030-035: RNCC: 5 | RNVC: 2
203306-2: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-17-029-9489
Hand File

170299489
TVA5110-2-263-005-1.1.39: RNCC: 3 | RNVC: 2
TVA5110-2-263-005: RNCC: 5 | RNVC: 1
12700803: RNCC: 5 | RNVC: 2

17 Jun 1972

5110-12-176-8353
Hand Reamer

121768353
DIN206-B15-HSS: RNCC: 2 | RNVC: 2
301-FORM B-15: RNCC: 3 | RNVC: 2
F1131-15: RNCC: 3 | RNVC: 2
16010-15: RNCC: 5 | RNVC: 2
160110-15: RNCC: 5 | RNVC: 2
7586C15: RNCC: 5 | RNVC: 9
536C15: RNCC: 5 | RNVC: 9
B15DIN206HSS: RNCC: 5 | RNVC: 9
13010-15: RNCC: 5 | RNVC: 9

20 Dec 1978

5110-15-137-8455
Scalpello Ad Unghia

151378455
3603/0-150: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-22-609-6805
Hand File

226096805
F0618AL06: RNCC: 3 | RNVC: 2

16 Feb 2005

5110-21-639-4390
Hand File

216394390
39GP30: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-21-639-4841
Hand File

216394841
39GP53: RNCC: 4 | RNVC: 1

6 Nov 1964

5110-99-413-2051

5110-12-156-3205

5110-15-210-4797
Forbice

152104797
EX5110RN0407091: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-318-3402
Isolierungs Halter

123183402
VB: RNCC: 3 | RNVC: 2
2522: RNCC: 5 | RNVC: 2
VB: RNCC: 5 | RNVC: 2
2522: RNCC: 5 | RNVC: 2

5 Jul 1989

5110-66-153-9574
Hand Reamer

661539574
UCT 050074: RNCC: 3 | RNVC: 2

3 Jan 2006

5110-14-245-9090
Decoupejoint Specia

142459090
0808232: RNCC: 3 | RNVC: 2
DEC0UPE J0INT LISSE 22 MM: RNCC: 3 | RNVC: 2
245.T22: RNCC: 5 | RNVC: 2
245T22: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-21-868-0143
Hand Round Nose Chisel

218680143
PPC1Z: RNCC: 3 | RNVC: 2

14 Jul 1972

5110-99-436-5144

5110-15-165-4075
Raschietto 'Beta'

151654075
1717A200: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-351-7952

5110-15-137-5506
Pinza Spelafili

151375506
433-270: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-176-8363
Hand Reamer

121768363
DIN206-B25-HSS: RNCC: 2 | RNVC: 2
F1131-25: RNCC: 3 | RNVC: 2
301-FORM B-25: RNCC: 3 | RNVC: 2
536C25: RNCC: 5 | RNVC: 9
B25DIN206HSS: RNCC: 5 | RNVC: 9
13010-25: RNCC: 5 | RNVC: 9
7586C25: RNCC: 5 | RNVC: 9

20 Dec 1978

5110-99-122-7946
Plane Cutter Bit

5110-23-113-9196
File Half Round Wit

231139196
RK8894578: RNCC: 3 | RNVC: 2

12 Jun 2004

5110-21-108-9199
Hand Rasp

211089199
BC3494: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-13-116-8124
Deburring Tool Kit

131168124
UK3000: RNCC: 3 | RNVC: 2

19 Feb 1998

5110-12-010-5250

5110-21-637-5609
Hand Reamer

216375609
CRITCHLEYANGLEBLADE: RNCC: 3 | RNVC: 1
1F108420: RNCC: 5 | RNVC: 9

25 May 1968

5110-99-924-9217
Hand Cable Stripper

999249217
RINGING TOOL: RNCC: 3 | RNVC: 2
0559-221468: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-17-115-7569
Zaagketting 15"

171157569
501 84 04-64: RNCC: 3 | RNVC: 2

4 Jun 2003

5110-12-156-3203
Sealing Surface Milling Cutter

121563203
5122-50X40-75DEG: RNCC: 3 | RNVC: 2
512250X4075GRAD: RNCC: 5 | RNVC: 2

30 May 1969

5110-21-849-9314
Single Bow Cutting Punch

218499314
147: RNCC: 3 | RNVC: 1
5110-0961: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-25-103-7679
Double Bow Cutting Punch Set

251037679
FS 5110-0197 B: RNCC: 2 | RNVC: 2

1 Jan 1984

5110-21-637-5596
Hand Reamer

216375596
CRITCHLEYANGLEBLADE: RNCC: 3 | RNVC: 1
H5: RNCC: 5 | RNVC: 1
1F108100: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-12-331-5797
Knife Blade

123315797
06452061: RNCC: 3 | RNVC: 9

24 May 1993

5110-15-183-4889
Scalpello Legno

151834889
COMM631018020063: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-98-107-5950
Hand File

981075950
300MM,THREE SQUARE,SMOOTH: RNCC: 5 | RNVC: 9

3 Nov 1983

5110-15-190-3667
Sponderuola Ferro S

151903667
5QLESE20: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-238-1693
Tronchese

152381693
1462629: RNCC: 3 | RNVC: 2

27 Aug 2007

5110-15-185-6118
Idrospazzola

151856118
NOREFIDRO: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-33-206-1000
Hand Metal Stamping Die

332061000
0303533: RNCC: 3 | RNVC: 2

6 Aug 2007

5110-14-550-3088
End Cutting Nippers

145503088
190.16G: RNCC: 3 | RNVC: 2

15 Jun 2006

5110-27-024-5193
Hand Metal Cutting Shears

270245193
6740460140: RNCC: 2 | RNVC: 1

9 Nov 2004

5110-15-197-2545
Screw Thread Insert Breaker

151972545
PN UAS 00036502: RNCC: 3 | RNVC: 2
5110F76030671: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-27-055-4937
Knife Blade

270554937
0416 010 8003: RNCC: 5 | RNVC: 9

8 Dec 2011

5110-17-700-9847
Firmer Chisel

177009847
1111.12: RNCC: 3 | RNVC: 2

6 May 1968

5110-25-140-4209
Bue Sag Blad

5110-25-103-8647

5110-25-100-9562
Single Bit Ax

251009562
FS5110-0403 POS 2: RNCC: 2 | RNVC: 2
07170: RNCC: 3 | RNVC: 2
224H: RNCC: 3 | RNVC: 2
233B: RNCC: 3 | RNVC: 2
3186-170-1: RNCC: 5 | RNVC: 2
230: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-22-615-9083
Hand File

226159083
DBH-2-D76: RNCC: 3 | RNVC: 2
0403062-1: RNCC: 5 | RNVC: 2

4 Oct 2007

5110-34-038-0597
Paper Cutter

340380597
3M-14: RNCC: 3 | RNVC: 2
004493-354094: RNCC: 5 | RNVC: 9

20 Jun 2008

5110-66-152-2164
Craftsman's Knife

661522164
NO PRIMARY REF 66-152-2164: RNCC: 3 | RNVC: 2
46432500: RNCC: 5 | RNVC: 2

18 Jun 2004

5110-17-124-6143
Hand Metal Cutting Punch And Die

171246143
ROND 6.5: RNCC: 3 | RNVC: 2

26 Nov 2012

5110-12-323-1954
Tube Cutter

123231954
23527: RNCC: 3 | RNVC: 2
23527 G-R: RNCC: 5 | RNVC: 2

31 Oct 1990

5110-99-402-0963
Nozzle Body Scraper

994020963
NO PRIMARY REF 99-402-0963: RNCC: 3 | RNVC: 2
7044-70: RNCC: 5 | RNVC: 2
ET070: RNCC: 5 | RNVC: 2
Y7044-70: RNCC: 5 | RNVC: 2
CBY7044-70: RNCC: 5 | RNVC: 2
526-947207: RNCC: 6 | RNVC: 9
H526-947207: RNCC: 6 | RNVC: 9
LV6MT12CB7044-70: RNCC: 6 | RNVC: 9
16C3573: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-639-5544
Tinner's Hollow Cutting Punch

216395544
101-3/4: RNCC: 3 | RNVC: 2
39GP44: RNCC: 4 | RNVC: 1

4 Jun 1968

5110-21-807-1473
Hand Reamer

218071473
B94-2: RNCC: 3 | RNVC: 1
B174-2: RNCC: 3 | RNVC: 1
712-049469: RNCC: 3 | RNVC: 2
B5-14: RNCC: 4 | RNVC: 1
4503 23-32: RNCC: 5 | RNVC: 2
50-10972: RNCC: 5 | RNVC: 9

4 Jun 1968

5110-21-849-7495
Woodworking Butt Chisel

218497495
60C: RNCC: 3 | RNVC: 1
16-632: RNCC: 3 | RNVC: 2
GGGC311: RNCC: 4 | RNVC: 1
60: RNCC: 5 | RNVC: 1
109BC-2: RNCC: 5 | RNVC: 2
5110-0119: RNCC: 6 | RNVC: 9
REVB: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-22-610-9591
Hand File

226109591
1-100-08-2-2: RNCC: 3 | RNVC: 2

11 Jul 2005

5110-15-237-0654
Seghetto Per Legno

152370654
305-12-U13/14: RNCC: 3 | RNVC: 2
511015E097870: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-12-129-3893
Hand Reamer

121293893
DIN859-B21,5-HSS: RNCC: 2 | RNVC: 2
415-21,50: RNCC: 3 | RNVC: 2
11606999-21,5: RNCC: 3 | RNVC: 2
011011-21,5: RNCC: 3 | RNVC: 2
21-5DIN859SCHNELLARBEITSSTAHLS8-: RNCC: 5 | RNVC: 9

30 May 1969

5110-41-000-2238
Edge Cutting Trimming Tool

410002238
23.002.028.00: RNCC: 3 | RNVC: 2

3 Nov 2006

5110-15-208-4831
Alesatore Cilindric

152084831
3AAXFCFRDP10: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-140-1389

5110-21-105-0238
Hand Metal Stamping Die

211050238
312237-1: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-14-570-0460
End Cutting Nippers

145700460
14100075972: RNCC: 3 | RNVC: 2

14 Nov 2011

5110-99-665-6611
Torque Load Equipme

996656611
MC1275080: RNCC: 3 | RNVC: 2

20 May 2002

5110-15-176-2362
Prolunga Per Impugn

151762362
EX5110RI5204433: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-189-9842
Utensile Di Precisi

151899842
MOD.3: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-14-244-0775

5110-99-942-0331
Hand Reamer

999420331
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16526: RNCC: 6 | RNVC: 9
1B3167: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-942-0157
Hand Reamer

999420157
BS122 PART 2: RNCC: 4 | RNVC: 1
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16349: RNCC: 6 | RNVC: 9
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-942-0096
Hand Reamer

999420096
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
14MM PARALLEL HAND REAMER: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-218-3287
Giravite Torx

152183287
7/01714: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-812-2566
Edge Trimming Tool

5110-12-350-2408
Bucksaw

123502408
TL5110-0040: RNCC: 2 | RNVC: 2
JDKS21: RNCC: 3 | RNVC: 2
5110-01130: RNCC: 6 | RNVC: 9

2 Mar 2000

5110-21-637-4358
Hand Masonry Drill

216374358
1285-12000: RNCC: 3 | RNVC: 2
1285-12: RNCC: 5 | RNVC: 9
1F32670: RNCC: 6 | RNVC: 9
312886-38: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-12-315-1615
Saege Anschlag

123151615
NO PRIMARY REF 12-315-1615: RNCC: 3 | RNVC: 2
302: RNCC: 5 | RNVC: 9

24 Sep 1988

5110-99-434-1658

5110-14-437-7135

5110-21-105-2134
Punch And Die Punch

211052134
2: RNCC: 3 | RNVC: 1
300080266: RNCC: 3 | RNVC: 2
1F40: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-27-000-8043
Single Bow Cutting Punch

270008043
5700 24 0004: RNCC: 3 | RNVC: 2

11 Jun 1991

5110-17-007-4939
Hand File

170074939
TVA5110-2-263-005-1.1.22: RNCC: 3 | RNVC: 2
TVA5110-2-263-005: RNCC: 5 | RNVC: 1
003658: RNCC: 5 | RNVC: 2
12500801: RNCC: 5 | RNVC: 2
GGGF325TYPE13CLASS2STYLEC: RNCC: 5 | RNVC: 2

17 Jun 1972

5110-12-131-6995
Ha Fuehrungsbuchse

121316995
140.02.600: RNCC: 3 | RNVC: 2
200-42: RNCC: 5 | RNVC: 9
200-42V5-9-6-5: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-126-5396
Hand Valve Seat Rotary Tool Set

121265396
218-00-001: RNCC: 3 | RNVC: 2
900-0: RNCC: 5 | RNVC: 2
5110-12400: RNCC: 6 | RNVC: 9
5110-12400: RNCC: 6 | RNVC: 9

30 May 1969

5110-12-120-0728
Single Bit Ax

121200728
DIN7294-B2SB-A: RNCC: 2 | RNVC: 2
8.454.236.000: RNCC: 3 | RNVC: 9
B2SBDIN7294A: RNCC: 5 | RNVC: 2
DIN7294B2SB-A: RNCC: 5 | RNVC: 9
5110-005: RNCC: 5 | RNVC: 9
5110-0005: RNCC: 5 | RNVC: 9
5110-005: RNCC: 5 | RNVC: 9
TL5110-0005: RNCC: 5 | RNVC: 9
5110-10372: RNCC: 6 | RNVC: 9
5110-10372: RNCC: 6 | RNVC: 9

30 May 1969

5110-14-490-8866
Alesoir

144908866
4067 010 002 054: RNCC: 3 | RNVC: 2
F300 0T 000 5138: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-99-601-0885

5110-99-601-0874

5110-15-216-5122
Scalpello Piatto Pe

152165122
SCALPELLOPIATTOMARTDEM: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-639-4901
Firmer Chisel

216394901
720: RNCC: 3 | RNVC: 1

9 Aug 1966

5110-98-801-0905

5110-99-000-5775

5110-12-023-0155

5110-21-880-8579
Plier Cutting Punch

218808579
153: RNCC: 3 | RNVC: 1

12 Mar 1980

5110-98-205-4855
Hand Hacksaw Blade

982054855
DFAMPD00200 D: RNCC: 2 | RNVC: 2

24 Oct 2000

5110-23-112-3454
Tool

231123454
SK1338DA: RNCC: 3 | RNVC: 2

4 Jan 1994

5110-99-138-8302
Hand Hacksaw Frame

5110-99-812-3659

5110-21-862-7197
Pipe Cutter

218627197
590K: RNCC: 3 | RNVC: 2

15 Jul 1971

5110-17-115-6068
Hatchet Handle

171156068
GARDENA TYPE 100 (3516): RNCC: 3 | RNVC: 2
3516: RNCC: 5 | RNVC: 2

22 Apr 2003

5110-25-133-8516

5110-13-118-0037
Wood Hand Saw

131180037
277-26-U7/8: RNCC: 3 | RNVC: 2

8 Nov 2000

5110-99-212-5358
Gauge

992125358
1026277: RNCC: 3 | RNVC: 2

9 Jan 2003

5110-14-244-0712

5110-23-114-3157
Single Bit Ax

231143157
2401102160.003: RNCC: 3 | RNVC: 2

23 Sep 2009

5110-21-809-3205

5110-98-854-4494

5110-14-271-7277
Manche Tranche Bois

142717277
15-50TRANCHE: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-16-001-7401
Hand Cold Chisel

160017401
101-200 PVC: RNCC: 3 | RNVC: 2

27 Mar 2002

5110-14-244-0666

5110-27-029-6124
Diagonal Cutting Pliers

270296124
3700 16 5180: RNCC: 2 | RNVC: 1

20 Apr 2006

5110-21-876-0299
Metal Sta Die Wheel

218760299
1591: RNCC: 3 | RNVC: 1
1567T326: RNCC: 3 | RNVC: 2
1567Y326: RNCC: 5 | RNVC: 9

26 Apr 1977

5110-15-137-9525
Tronchese A Taglien

151379525
1082332: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-14-266-7011

5110-21-639-4905
Firmer Chisel

216394905
720: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-14-244-0646

5110-15-183-4891
Pialla

151834891
COMM631003020026: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-66-150-2129
Hand Hacksaw Blade

661502129
NO PRIMARY REF 66-150-2129: RNCC: 3 | RNVC: 2
06900308: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-12-127-7389
Single Bow Cutting Punch

121277389
DIN7200-B17: RNCC: 2 | RNVC: 2
B17DIN7200: RNCC: 5 | RNVC: 2
DIN7200B17: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-149-7525
Hand File

661497525
NO PRIMARY REF 66-149-7525: RNCC: 3 | RNVC: 2
07076503: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-21-886-6963
Head Cutter

218866963
300: RNCC: 3 | RNVC: 2

10 Oct 1981

5110-15-172-5218
Scalpello A Punta I

151725218
SCALPELLO A PUNTA IN ACCIAIO MB: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-217-5493
Lima Tonda Da 8

152175493
EXRI7905491: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-8319
Sega A Mano

152088319
348FL: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-244-0809

5110-21-801-6568

5110-15-210-5664
Pinza Becco Lungo

152105664
281-MV: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-910-5895
Pipe Cutter

999105895
H1952: RNCC: 3 | RNVC: 2
DEF STAN 51-11 (PART 25): RNCC: 4 | RNVC: 1
H1952: RNCC: 5 | RNVC: 2
DEFSTAN51-11PT25: RNCC: 6 | RNVC: 9
1B2981: RNCC: 6 | RNVC: 9
FA11570: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-639-5784
Double Bow Cutting Punch

216395784
149: RNCC: 3 | RNVC: 1
1082-3/8 INCH: RNCC: 3 | RNVC: 2
GGGP833: RNCC: 4 | RNVC: 1
27: RNCC: 5 | RNVC: 1
REVA: RNCC: 6 | RNVC: 9
1082: RNCC: 6 | RNVC: 9
52C1311-2: RNCC: 6 | RNVC: 9

23 Feb 1966

5110-14-394-4110
A Main Lime

5110-27-019-4617
Plumber's Saw Blade

270194617
10091KAXK0005: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-27-019-4357
Hand File

270194357
10091KEGE0024: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-530-3424
Cutting Punch Insert

145303424
245A.T48: RNCC: 3 | RNVC: 2
3148511586709: RNCC: 5 | RNVC: 2

3 Jun 2002

5110-14-451-4125
Double Bow Cutting Punch

144514125
245.J2DIAM48: RNCC: 3 | RNVC: 2

19 Nov 1991

5110-21-842-8378

5110-15-233-0727
Lima Piatta "T Bast

152330727
A20GA20: RNCC: 3 | RNVC: 2
511015E016927: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-99-924-2810
Ship Scraper

999242810
13524: RNCC: 3 | RNVC: 2
0276-13524: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-126-1538
Hand Metal Cutting Shears

121261538
307-250LINKS: RNCC: 3 | RNVC: 2
314-260LINKSSCHNEIDEND: RNCC: 3 | RNVC: 9

30 May 1969

5110-14-490-8829
Alesoir

144908829
4067 010 000 292: RNCC: 3 | RNVC: 2
F300 0T 000 5101: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-15-165-3742
Tronchese Con Tagli

151653742
461160: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-273-7492

5110-14-371-5220
Coupe-Boulo Support

143715220
20728520: RNCC: 3 | RNVC: 2

5 Aug 1981

5110-98-103-4106
Steel Strapping Cutter

981034106
125 STRAPCUTTER: RNCC: 3 | RNVC: 2
125 STRAPCUTTER: RNCC: 3 | RNVC: 2

18 Sep 1973

5110-22-620-3204
Tube Cutter

226203204
01SCMT09T30817-40: RNCC: 3 | RNVC: 2

15 Feb 2010

5110-15-124-0653
Punzone Cromato

151240653
30: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-37-513-4965
Knockout Punch And Die

375134965
2A70.08.015: RNCC: 3 | RNVC: 2

13 Feb 2007

5110-66-010-7939
Adjustab Blade Set

660107939
MICR0SETBLADESETB: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-14-526-3046
Exposed Blade Tube Deburring Tool

145263046
D9851M0608: RNCC: 3 | RNVC: 2

18 Jul 2001

5110-15-000-2063
Pliers

150002063
700940 180: RNCC: 3 | RNVC: 2

8 Feb 2013

5110-33-156-4510
Hand Operated Cable Cutter

331564510
DIN 5252: RNCC: 2 | RNVC: 2
62615: RNCC: 3 | RNVC: 2
008.350: RNCC: 3 | RNVC: 2

18 Mar 1994

5110-15-209-4227
Cesoia A Mano X Lam

152094227
2BR-6: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-154-0185
Diagonal Cutting Pliers

661540185
101017: RNCC: 3 | RNVC: 2

24 Jan 2006

5110-22-303-8654

5110-22-303-8655

5110-12-172-7934
Diagonal Cutting Pliers

121727934
3-068-2: RNCC: 3 | RNVC: 2
2646M: RNCC: 3 | RNVC: 2
148792: RNCC: 5 | RNVC: 2

20 Feb 1978

5110-12-371-2322
Pliers

123712322
10070: RNCC: 3 | RNVC: 2
00.20.27.87: RNCC: 5 | RNVC: 2

5 Mar 2007

5110-98-851-7346
Hand File

988517346
14 IN HAND SECOND: RNCC: 3 | RNVC: 1
350MM WILTSHIRE: RNCC: 3 | RNVC: 1
FA27A STUBS: RNCC: 6 | RNVC: 9

1 Dec 1976

5110-21-102-9255
Knockout Punch And Die

211029255
MS16322-6: RNCC: 2 | RNVC: 2
737-2-3/8: RNCC: 5 | RNVC: 2
76BB: RNCC: 5 | RNVC: 2
17522: RNCC: 5 | RNVC: 2
17572: RNCC: 5 | RNVC: 2
737: RNCC: 5 | RNVC: 9
GGGP836: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-15-214-8136
Accette

152148136
ACCETTE: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-165-3857
Serie Scalpelli Fal

151653857
10032226: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-98-107-5983
Hand File

981075983
100MM,THREE SQUARE,SECOND CUT: RNCC: 5 | RNVC: 9

3 Nov 1983

5110-12-139-3021

5110-15-136-0144
Tronca Cav.Elett.Co

151360144
1132IS230: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-208-4963
Punzone Acc. Lungh.

152084963
3GANCNLIT03X120: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-120-0891
Ha Wire Rope Cutter

991200891
BC949H: RNCC: 3 | RNVC: 2
H517: RNCC: 6 | RNVC: 9
1A3743: RNCC: 6 | RNVC: 9
H517: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-276-8001

5110-12-385-3349
Craftsman's Knife

123853349
51.000.046A: RNCC: 3 | RNVC: 2
51.000.046A: RNCC: 5 | RNVC: 2

24 May 2011

5110-14-567-1987
Diagonal Cutting Pliers

145671987
192.16TE: RNCC: 3 | RNVC: 2
3148516236975: RNCC: 5 | RNVC: 2
623697: RNCC: 5 | RNVC: 2

21 Feb 2011

5110-14-310-4215

5110-15-211-2149
Lama Spezzare

152112149
111301: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-413-8261
Hand Reamer

5110-37-509-0365

5110-27-011-7686
Hand Reamer

270117686
09013KR1012: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-12-185-1625
Hand Metal Stamping Die

121851625
510017: RNCC: 2 | RNVC: 9

16 Sep 1980

5110-99-172-9683
Filling Knife

991729683
21 3477: RNCC: 3 | RNVC: 2

3 Feb 1993

5110-21-868-0745
Hand File

218680745
15-223: RNCC: 3 | RNVC: 2

18 Aug 1972

5110-27-027-1637
End Cutting Nippers

270271637
04022904816: RNCC: 2 | RNVC: 1

12 Sep 2005

5110-15-170-1164
Quadro Elettr.

151701164
T72001322: RNCC: 3 | RNVC: 2

5 Nov 2002

5110-22-210-2344

5110-99-428-9635

5110-99-465-8155

5110-15-213-3273
Lima A Coltello Mm.

152133273
1-250-08-3-0: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-465-8143
File

994658143
NO PRIMARY REF 99-465-8143: RNCC: 3 | RNVC: 2
PC2-29D: RNCC: 5 | RNVC: 2
1A3928: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-156-1510
Hand Cold Chisel

121561510
NM247-01: RNCC: 3 | RNVC: 2
NM247-01: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-608-0811
Hand Operated Cable Cutter Blade

226080811
EH 230-2 C 24 RSG: RNCC: 3 | RNVC: 2

7 Sep 2004

5110-21-814-6416
Dimpling Punch

218146416
ZT1855-3/16: RNCC: 3 | RNVC: 2
ZT1855-3-16: RNCC: 5 | RNVC: 2

13 Jun 1964

5110-12-177-5803
Rectangular Cutting Punch

121775803
6886-8X2: RNCC: 3 | RNVC: 9
3916-8X2: RNCC: 5 | RNVC: 9

7 Feb 1979

5110-15-205-0508
Forbici

152050508
PXRM3: RNCC: 3 | RNVC: 2
PXRM3: RNCC: 3 | RNVC: 2
(241)A4155PXRM3: RNCC: 5 | RNVC: 2

15 Feb 2012

5110-14-271-5947

5110-15-184-7377
Manico

151847377
5GLEMTCN350: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-973-9259
Hand Reamer

999739259
A06470AAR: RNCC: 3 | RNVC: 2
1MEVDTP: RNCC: 6 | RNVC: 9

1 Apr 2003

5110-99-942-0003
Hand Reamer

999420003
BS122PT2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-942-0322
Hand Reamer

999420322
BS122 PART 2: RNCC: 4 | RNVC: 1
F1FA16517: RNCC: 6 | RNVC: 9
1B1986: RNCC: 6 | RNVC: 9
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-111-0874

5110-25-102-3785

5110-99-137-5684

5110-15-208-4977
Scalpello

152084977
3SANMMPTZ200X26: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-165-4080
Tronchese

151654080
1088200: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-218-1125
Coltello Olfa

152181125
5120004: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-165-3842
Lima Per Meccanica

151653842
256236: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-254-0557
Pipe Cutter

992540557
7010200: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-66-142-1210
Hand Diamond Point Chisel

661421210
5CHD12710: RNCC: 3 | RNVC: 2
59RVE906: RNCC: 5 | RNVC: 2

5 Mar 1996

5110-12-126-1897
Cutting Punch Insert

121261897
TL5110-0033-B11: RNCC: 2 | RNVC: 2
8720: RNCC: 3 | RNVC: 2
1720: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-267-4798
Double Bow Cutting Punch

142674798
8018220001: RNCC: 3 | RNVC: 2
214-22: RNCC: 3 | RNVC: 2
4638-22: RNCC: 3 | RNVC: 9
SYQ0833: RNCC: 5 | RNVC: 2
345-11-22: RNCC: 5 | RNVC: 9
376-22: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-21-105-2285
Hand Reamer Set

211052285
L49-070-302LC002: RNCC: 3 | RNVC: 2
S51-057: RNCC: 5 | RNVC: 2
312121: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-99-910-5290
Leatherw Knife Head

999105290
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H1521: RNCC: 6 | RNVC: 9
H1521: RNCC: 6 | RNVC: 9
FA14957: RNCC: 6 | RNVC: 9
1K250: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-194-0189
Craftsman's Knife

121940189
6337: RNCC: 3 | RNVC: 2
09-04-02-0: RNCC: 5 | RNVC: 2
6533-000: RNCC: 5 | RNVC: 2
020208-124000.01: RNCC: 5 | RNVC: 2

23 Sep 1982

5110-15-211-9807
Giratubi Svedese 45

152119807
311430: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-176-4556
Lame Di Ricambio In

151764556
5233GD: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-99-755-4353
Hex Wrench Steel

997554353
BO763: RNCC: 3 | RNVC: 2

29 Apr 2004

5110-99-774-6011
Technicia Knife Set

997746011
1737: RNCC: 3 | RNVC: 2
UNITOOL: RNCC: 5 | RNVC: 2

25 Sep 1991

5110-15-208-4528
Alesatore

152084528
3AARPERMDQ22: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-216-4901
Levachiodi Medio

152164901
LEVACHIODIMEDIO: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-32-081-1237
Scraper Assembly

320811237
201863: RNCC: 3 | RNVC: 2

23 Mar 2007

5110-22-251-2461

5110-25-102-8722

5110-25-117-7972
Meisel

251177972
C11: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-14-244-0729

5110-12-154-9707
Hand- Entgrater

121549707
100278-76000.00.0: RNCC: 2 | RNVC: 2
100278-76000.00.0: RNCC: 3 | RNVC: 2
100278-76000-00-0: RNCC: 5 | RNVC: 2
100278-76000-00-0: RNCC: 5 | RNVC: 9
100278-76000-00-0: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-454-7579

5110-27-000-8047
Single Bow Cutting Punch

270008047
5700 24 0008: RNCC: 3 | RNVC: 2

11 Jun 1991

5110-99-739-3244
Diagonal Cutting Pliers

997393244
7190DS: RNCC: 3 | RNVC: 2
7190AS: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-150-3289
Diagonal Cutting Pliers

661503289
NO PRIMARY REF 66-150-3289: RNCC: 3 | RNVC: 2
03822706: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-14-456-2860
End Cutting Nippers

144562860
53-150: RNCC: 3 | RNVC: 2
91739449: RNCC: 5 | RNVC: 2

25 Jun 1992

5110-21-885-2051
Hand File

218852051
39-GP-53: RNCC: 4 | RNVC: 1

23 Jun 1981

5110-14-351-7955

5110-15-132-5193
Punta Per Tracciare

151325193
4325G: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-210-4147
Confezione Lame Ric

152104147
CONFLAMERIC: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-041-4341
Matrice

150414341
2295-6M: RNCC: 3 | RNVC: 2
A32923-4M: RNCC: 5 | RNVC: 2

1 Jan 1974

5110-23-113-7820
Shaft Suspension Ho

231137820
T813-02-01: RNCC: 3 | RNVC: 2

3 Jun 2003

5110-12-132-1927
Woodcarving Gouge

121321927
TL5110-0024-42: RNCC: 2 | RNVC: 2
2573-11-12MM: RNCC: 5 | RNVC: 9
5110-0024-42: RNCC: 5 | RNVC: 9
5110-024-42: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-147-0189
Docking Hand Saw

661470189
MDL-CC14: RNCC: 3 | RNVC: 2
MDL-CC14: RNCC: 5 | RNVC: 2

8 Nov 2000

5110-21-866-8079
Chisel And Gouge Handle

218668079
NO PRIMARY REF 21-866-8079: RNCC: 3 | RNVC: 2

19 May 1972

5110-12-184-4591
Hand Cable Stripper

121844591
05409: RNCC: 3 | RNVC: 2

24 Jul 1980

5110-22-613-4889
Electricians' Scissors

226134889
EROP32: RNCC: 3 | RNVC: 2

15 Jun 2006

5110-14-264-4829

5110-12-148-6027

5110-12-126-1660

5110-15-208-4781
Alesatore

152084781
3AAWFCFRDP23-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-25-134-4444

5110-22-100-0023

5110-22-100-0182

5110-14-275-8945
Glass Cutter

142758945
M0LETTEVIDUR: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-14-511-1381
Cutting Punch Insert

145111381
245A.T8: RNCC: 3 | RNVC: 2

2 Dec 1998

5110-15-215-3988
Chiave Da 13 Pastor

152153988
88300013: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-221-7663
Serie Scalpelli Bet

152217663
35/300/200/150: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-136-3144
Tronchese Per Elett

151363144
1798/9: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-14-555-3147
Tinner's Hollow Cutting Punch

145553147
01750: RNCC: 3 | RNVC: 2
01750: RNCC: 3 | RNVC: 2

24 Oct 2007

5110-27-011-6669
Hand File

270116669
09013YE1258: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-66-149-7502
Hand File

661497502
NO PRIMARY REF 66-149-7502: RNCC: 3 | RNVC: 2
07072701: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-98-853-2278
Wire Cutter

988532278
NO PRIMARY REF 98-853-2278: RNCC: 3 | RNVC: 2
9009: RNCC: 6 | RNVC: 9

8 May 1979

5110-99-282-4449
Bolt Cutter

992824449
NO PRIMARY REF 99-282-4449: RNCC: 3 | RNVC: 2
12949: RNCC: 5 | RNVC: 2
5010559129492: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-17-701-5622
Hand File

177015622
NO PRIMARY REF 17-701-5622: RNCC: 3 | RNVC: 2

19 Jan 1973

5110-99-244-3199
Fol Slimknife Blade

992443199
11-115: RNCC: 3 | RNVC: 2
T30863: RNCC: 5 | RNVC: 2
0-11-115: RNCC: 5 | RNVC: 2
30863: RNCC: 5 | RNVC: 2
5905: RNCC: 5 | RNVC: 2

21 May 1990

5110-14-274-8002
Hand Metal Stamping Die Set

142748002
293A.4: RNCC: 3 | RNVC: 2
DELA.3231.04: RNCC: 3 | RNVC: 2
4651-4: RNCC: 3 | RNVC: 9
SYQ0884: RNCC: 5 | RNVC: 2
342-02-4: RNCC: 5 | RNVC: 9
3231-4: RNCC: 5 | RNVC: 9
91CHIFFRES4: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-12-126-1439
Hand Reamer

121261439
DIN206-A4-HSS: RNCC: 2 | RNVC: 2
301-A4: RNCC: 3 | RNVC: 2
F1111-4,0: RNCC: 3 | RNVC: 2
301-FORM A-4,0: RNCC: 5 | RNVC: 2
DIN 206-A 4-HSS: RNCC: 5 | RNVC: 9
A4DIN206: RNCC: 5 | RNVC: 9
DIN206-A-4-HSS: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-216-1698
Filiera 16X1

152161698
SKF26X1: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-165-3968
Lama Ricambio In Co

151653968
Q220001: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-138-0771
Pinza Fustellatrice

151380771
160: RNCC: 3 | RNVC: 2
160001: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-99-538-2712
Tube Chamfer1ng Too

5110-15-218-9942
Pinza Wave

152189942
29300101: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-511-0298
Bras Decoupoir Circ

145110298
245A.B1: RNCC: 3 | RNVC: 2

25 Nov 1998

5110-66-109-9870
Tap Deburring Blade

661099870
B10: RNCC: 3 | RNVC: 2

19 Oct 1983

5110-99-466-5537

5110-12-129-3906
Hand Reamer

121293906
DIN859-B17-HSS: RNCC: 2 | RNVC: 2
415-17,00: RNCC: 3 | RNVC: 2
11606170: RNCC: 3 | RNVC: 2
011011-17: RNCC: 3 | RNVC: 2
11606HSS17: RNCC: 5 | RNVC: 2

30 May 1969

5110-12-129-3914
Hand Reamer

121293914
DIN859-B13-HSS: RNCC: 2 | RNVC: 2
415-13,00: RNCC: 3 | RNVC: 2
11606130: RNCC: 3 | RNVC: 2
011011-13: RNCC: 3 | RNVC: 2
11606HSS13: RNCC: 5 | RNVC: 2
13DIN859SCHNELLARBEITSSTAHLSPIR-: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-209-7660
Seghetto Universale

152097660
MM350: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-842-8843

5110-25-105-9098
Diagonal Cut Pliers

5110-25-118-4336

5110-25-126-6691

5110-15-186-6177
Punzone

151866177
SRM0810S: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-20-001-8764
Pocket Knife

200018764
DKN09016: RNCC: 3 | RNVC: 2

14 Feb 2005

5110-15-123-2322
Coltello Per Elettr

151232322
1130-190: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-010-5257

5110-27-010-4634
Plumber's Saw Blade

270104634
07002YD0055: RNCC: 2 | RNVC: 1
DA0016133: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-165-4081
Tronchese Mm.110 Ar

151654081
E181110: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-21-102-7599
Cable Sheath Cutter

211027599
SHEATHRINGINGT00L: RNCC: 3 | RNVC: 2

4 Jun 1968

5110-99-465-4011

5110-66-150-2190
Hand Diamond Point Chisel

661502190
NO PRIMARY REF 66-150-2190: RNCC: 3 | RNVC: 2
07136207: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-99-666-2690
Hand Reamer

996662690
AT77652: RNCC: 3 | RNVC: 2
07491-030: RNCC: 6 | RNVC: 9

30 Sep 2004

5110-14-526-7549
Wire Stripper Blade

145267549
CT450392: RNCC: 3 | RNVC: 2

3 Sep 2001

5110-27-019-2843
Hand File

270192843
10131ME1027: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-33-158-4999
Firmer Chisel

331584999
119.150: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-12-130-9622
Drehwerkz Luenette

121309622
216.53.100: RNCC: 3 | RNVC: 2
200-6VD1KHDEUTZ: RNCC: 5 | RNVC: 9
200-6: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-143-3986
Utensile Da Tornio

151433986
777/18-20: RNCC: 3 | RNVC: 2
777-18-20: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-22-120-9870
Hand Cold Chisel

221209870
0304000200-3: RNCC: 3 | RNVC: 2
304-200X22: RNCC: 3 | RNVC: 2

30 May 1985

5110-12-129-2427
Coping Saw Blade

121292427
59875-011: RNCC: 3 | RNVC: 2
51822010: RNCC: 3 | RNVC: 2
120686: RNCC: 3 | RNVC: 2
575F104-1: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-214-8992
Bedano Diritto

152148992
S14-L40-45-P70: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-214-9133
Portalima Pansar

152149133
9-457-14-0-0: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-637-5271
Hand Reamer

216375271
4500: RNCC: 3 | RNVC: 1
D500: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
50-10931: RNCC: 3 | RNVC: 2
B174-2: RNCC: 4 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1

4 Jun 1968

5110-66-039-2122
Valve Seat Cutter

660392122
144404: RNCC: 3 | RNVC: 2

23 Apr 1971

5110-14-266-7021

5110-15-139-0924
Lama Per Taglierina

151390924
LMM 72: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-189-6106
Chiave Dinamometric

151896106
96501506: RNCC: 3 | RNVC: 2
96501506: RNCC: 3 | RNVC: 2
(241)A415596501506: RNCC: 5 | RNVC: 2

26 Feb 2010

5110-21-892-1935
Hand File

218921935
901714: RNCC: 3 | RNVC: 2

28 Feb 1983

5110-21-637-4337
Hand Masonry Drill

216374337
REF NOT ON FILE: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-12-389-2768
Tube Cutter

123892768
55063: RNCC: 3 | RNVC: 2

15 Jun 2012

5110-12-309-2850
Pliers

123092850
OL-POSTENZANGE: RNCC: 3 | RNVC: 9

9 Jan 1987

5110-99-910-4972
Hand File

999104972
H893: RNCC: 2 | RNVC: 2
DEF1098: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
FA13630: RNCC: 6 | RNVC: 9
1A952: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-104-9977

5110-25-140-7289
Hand File

5110-13-104-4807
Holder File Dolmar

5110-21-104-9597

5110-21-105-3198

5110-13-001-2341
Pocket: Knife

5110-98-800-4423

5110-21-104-9832

5110-21-105-0186

5110-15-175-6201
Forbice

151756201
DT2000: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-99-910-5357

5110-99-910-5305

5110-99-840-0301

5110-99-700-9177
Hand Wire Stripper

997009177
900513: RNCC: 3 | RNVC: 2
900500: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-598-6108
Valve Seat Cutter

995986108
A1025135: RNCC: 3 | RNVC: 2
OD284865: RNCC: 5 | RNVC: 2

10 May 2001

5110-98-203-2819
Knife Blade

982032819
0266A: RNCC: 3 | RNVC: 2

17 Aug 1989

5110-17-111-6580
Chain Drill Attachment

171116580
PM00514426: RNCC: 3 | RNVC: 2

10 Mar 1998

5110-99-717-9753
Block Plane

5110-14-339-0094

5110-21-002-2289

5110-99-466-9235

5110-25-102-3756
Hand File

251023756
FS 5110-0637 POS 6: RNCC: 2 | RNVC: 2

1 Jan 1984

5110-15-188-7546
Electricians' Scissors

151887546
194-5465: RNCC: 3 | RNVC: 2
(241)AA136194-5465: RNCC: 5 | RNVC: 2

11 Nov 2009

5110-14-213-6716
Couteau Pour Pince

142136716
401628-00: RNCC: 3 | RNVC: 2
C0UTEAUTP0URPINCE4010: RNCC: 5 | RNVC: 2
T: RNCC: 5 | RNVC: 2
B: RNCC: 5 | RNVC: 2

1 Jan 1964

5110-12-126-1513
Hand Reamer

121261513
NO PRIMARY REF 12-126-1513: RNCC: 3 | RNVC: 2
18-5DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-13-103-0082
Firmer Chisel

131030082
B325-326-20: RNCC: 3 | RNVC: 9

1 Apr 1975

5110-12-190-3204
End Cutting Nippers

121903204
6801180: RNCC: 3 | RNVC: 2
236432180: RNCC: 3 | RNVC: 2
4003773013808: RNCC: 5 | RNVC: 2
DIN5748-180H: RNCC: 5 | RNVC: 9
DIN5243-180HGERAUHT: RNCC: 5 | RNVC: 9

19 Nov 1981

5110-14-264-8272
Draw Knife

142648272
4605-14: RNCC: 3 | RNVC: 9
924-14: RNCC: 5 | RNVC: 2
924-16: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-15-143-3988
Utensili Da Tornio

151433988
777-12-20: RNCC: 3 | RNVC: 2
777/12-20: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-15-213-3266
Lima Quadra Taglio

152133266
1-160-06-2-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-220-3268
Seghetto Grande Per

152203268
CMK 32: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-4706
Lima

152084706
3LCNPKCNBSN200: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-165-1452
Chain Saw Filing Guide

121651452
56057504330: RNCC: 3 | RNVC: 2

30 May 1969

5110-12-385-2755
Oval Cutting Punch

123852755
50.000.108: RNCC: 3 | RNVC: 2

17 May 2011

5110-99-800-0587
Pocket Saw

998000587
01-15333: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-15-184-7347
Bedano Da Falegname

151847347
3QANFLM10: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-185-6493
Scribers

151856493
24416002: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-773-2609
Hand Masonry Drill

997732609
07751: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-98-206-3079
Hand Bench Shears

982063079
HS5: RNCC: 3 | RNVC: 2
04082421: RNCC: 5 | RNVC: 1

26 Aug 2005

5110-15-230-5649
Seghetto

152305649
1725015: RNCC: 3 | RNVC: 2
511015E090020: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-12-094-1220

5110-15-165-4116
Scalpello Nervato

151654116
351175: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-13-119-2483
Scraper Blade

131192483
B30: RNCC: 3 | RNVC: 2
3BB30: RNCC: 5 | RNVC: 2
02.20.19.00: RNCC: 5 | RNVC: 2

4 Jan 2006

5110-99-910-4960
Hand File

999104960
DEF1098A: RNCC: 4 | RNVC: 1
H20965: RNCC: 5 | RNVC: 2
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
FA13605: RNCC: 6 | RNVC: 9
1A937: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-27-040-0664
Ahsap Testere El

270400664
100-50: RNCC: 5 | RNVC: 9

4 Jan 2008

5110-99-702-2229
Guide Reamer

5110-25-102-3813
Hand File

5110-25-103-3365

5110-99-543-3104

5110-25-102-3770
Hand File

5110-99-140-3460
Diagonal Cutting Pliers

991403460
B50258-1: RNCC: 3 | RNVC: 2
B50258-1: RNCC: 5 | RNVC: 2
B50258: RNCC: 5 | RNVC: 2
B50258: RNCC: 5 | RNVC: 2
WE128B1: RNCC: 6 | RNVC: 9
85ACP: RNCC: 6 | RNVC: 9

1 Apr 1999

5110-25-147-1480
Paper Cutter

251471480
PPH-170-3: RNCC: 3 | RNVC: 2

1 Jul 1997

5110-15-199-1065
Raschietto Per Meta

151991065
3271/1-250: RNCC: 3 | RNVC: 2

12 Jan 2005

5110-12-121-1070
Hand Rasp

121211070
DIN7263-C250-3: RNCC: 2 | RNVC: 2
19138-250-3: RNCC: 3 | RNVC: 2
1552-250-3: RNCC: 3 | RNVC: 2
1552253: RNCC: 3 | RNVC: 2
C250-3DIN7263: RNCC: 5 | RNVC: 2
DIN7263C250-3: RNCC: 5 | RNVC: 9
B250X3DIN8334R: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-131-6989
Drehwerkzeug Pilot

121316989
217.71.157: RNCC: 3 | RNVC: 2
300-16: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-150-4678
File Handle

661504678
NO PRIMARY REF 66-150-4678: RNCC: 3 | RNVC: 2
00196282: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-66-152-2721
Straight Trimmers Shears

661522721
NO PRIMARY REF 66-152-2721: RNCC: 3 | RNVC: 2
74675500: RNCC: 5 | RNVC: 2

11 Jun 2004

5110-14-041-4913
Single Bow Cutting Punch

140414913
DCSEA 5903/FIG.11 EMPORTE-PIECE: RNCC: 3 | RNVC: 2
ESS2-3-02ANNEXE1BEP2: RNCC: 5 | RNVC: 2

1 Jan 1974

5110-98-107-7180
Hand Reamer

981077180
PARALLEL1-13/32X6-1/2X13IN.: RNCC: 3 | RNVC: 2

13 Feb 1984

5110-12-156-3218
Fraeser Halter

121563218
5114: RNCC: 3 | RNVC: 2
6.081.598.6500.1: RNCC: 5 | RNVC: 9
6-081-598-6500-1: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-637-5438
Hand Reamer

216375438
B174-2: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
712-050061: RNCC: 3 | RNVC: 2
B5-14: RNCC: 4 | RNVC: 1
50-10984: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-66-017-2394
Hand File

660172394
904861: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
HALFR0UNDFILE: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-21-639-6544
Ship Scraper

216396544
S22: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-15-141-1950
Tronchesine Per Lam

151411950
14-544: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-21-639-5966
Hand Metal Stamping Die Set

216395966
101: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-14-244-0882

5110-15-190-0104
Penna Per Incisioni

151900104
019480001: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-99-476-5536
Piston Unlock Tool

994765536
MC1275241: RNCC: 3 | RNVC: 2

20 May 2002

5110-14-274-7991

5110-12-177-4394
Hand Reamer Set

121774394
13010-9T032: RNCC: 3 | RNVC: 9

31 Jan 1979

5110-98-857-3295

5110-26-300-3078
Cylinder Ridge Reamer

263003078
335600300: RNCC: 3 | RNVC: 2

6 Mar 2007

5110-21-855-3506
File Handle

218553506
3STR0NGH0LDFILEHANDLE: RNCC: 3 | RNVC: 2
5110-0768: RNCC: 6 | RNVC: 9

19 Sep 1969

5110-15-208-2613
Scalpello

152082613
3SAGMMPUZ150X5: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-236-4996
Scalpello Da Murato

152364996
40732: RNCC: 3 | RNVC: 2
511015E104563: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-99-109-2394

5110-99-109-5332

5110-15-209-4606
Troncabulloni

152094606
1101/600: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-25-140-7444
Hand File

5110-19-003-4145

5110-12-347-8553
File Handle

123478553
PH13: RNCC: 3 | RNVC: 2

23 Feb 1999

5110-21-859-0403
Hand File

218590403
39GP53: RNCC: 4 | RNVC: 1

14 May 1970

5110-14-420-1028
Couteau Mobile

144201028
8814726136: RNCC: 3 | RNVC: 2

18 Nov 1987

5110-15-139-9130
Seghetto Per Ferro

151399130
539: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-236-5000
Lama Per Archetto

152365000
76362: RNCC: 3 | RNVC: 2
511015E104567: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-004-9143
Lama

150049143
63502096017: RNCC: 3 | RNVC: 2

9 Dec 2013

5110-25-102-7801
Double Bow Cutting Punch

251027801
2SBF5110HVK1: RNCC: 2 | RNVC: 1
221-4260: RNCC: 5 | RNVC: 2
221 4260: RNCC: 5 | RNVC: 2

1 Jan 1984