What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 6 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 6of 112

5110-14-271-8769
Coffret Decoupoirs

5110-22-221-3745
Hand File

5110-22-221-3760
Hand File

5110-21-637-5565
Hand Reamer

5110-21-105-2196
Hand Reamer

5110-21-105-1900
End Cutting Nippers

5110-21-105-2187
Hand Reamer

5110-21-639-5123
Firmer Gouge

5110-21-637-5689
Hand Reamer

5110-21-105-2227
Hand Reamer

5110-21-639-4278
Hand File

5110-22-119-7158
End Cutting Nippers

5110-12-121-4096
Hand File

5110-99-601-0867
Hand Reamer

5110-14-235-7203
Hand Metal Cutting Shears

5110-99-910-4176
Hand Cold Chisel

5110-25-140-2884
Double Bow Cutting Punch

5110-25-106-8483
Tube Universal Post

5110-22-121-4805
Hand Metal Cutting Shears

5110-21-639-5129
Turning Gouge

5110-25-143-5302
Metallic Eyelet

5110-25-140-9523
Hand Hacksaw Blade

5110-21-637-5308
Hand Reamer

5110-25-106-8454
Boiler Tube Cutter

5110-21-105-2126
Hand Leather Stamping Die Set

5110-98-202-6279
Hand File

5110-12-121-4328
Framing Chisel

5110-21-807-1455
Hand Masonry Drill Holder

5110-12-126-1921
Hand Cold Chisel

5110-21-639-3187
Hand Wire Stripper

5110-21-639-3180
Hand Metal Cutting Shears

5110-21-105-1213
Hand File

5110-25-103-4262
Craftsman's Knife

5110-98-855-7505
Pocket Knife

5110-99-730-1621
Hand Wire Stripper

5110-12-021-2694
End Cutting Nippers

5110-22-221-4637
Double Bow Cutting Punch

5110-25-103-7592
Hand Reamer

5110-25-102-3753
Hand File

5110-12-120-5833
Bow Saw

5110-25-125-6173
Hand Operated Cable Cutter

5110-99-663-9408
Bolt Cutter

5110-22-111-2524
Hand Metal Cutting Shears

5110-98-203-6972
Dimpling Die

5110-22-124-9778
Printer-Plotter Cutter

5110-22-607-8557
Die Assembly Ram

5110-12-129-6017
Hand Oil Groove Chisel

5110-21-105-2174
Hand Reamer

5110-21-639-6349
Spokeshave

5110-21-105-2379
Hand Saw Set

5110-21-851-2626
Hand Saw Set

5110-22-221-4634
Double Bow Cutting Punch

5110-99-213-5853
Wire Cutter Kit

5110-25-106-8464
Tube End Cutter

5110-21-639-4065
Single Bit Ax

5110-21-104-9365
Single Bit Ax

5110-21-639-4109
Hand File

5110-25-152-2724
Thread Restorer File

5110-21-108-7684
Oil Pump Reconditioning Tool Kit

5110-66-154-0702
Slip Joint Pliers

5110-14-200-1824
Gimlet

5110-25-143-8186
Diagonal Cutting Pliers

5110-12-120-9416
Hand File

5110-25-103-4780
Hand Cape Chisel

5110-21-639-5575
Hand Metal Cutting Punch And Die Set

5110-12-126-6581
Bucksaw

5110-99-004-0448
Valve Seat Cutter S

5110-98-203-3088
Firmer Chisel

5110-12-126-1803
Chisel And Gouge Handle

5110-12-126-2242
Bolt Cutter

5110-12-171-0448
Hand Metal Cutting Shears

5110-22-121-4806
Metal Cutter Blade

5110-12-120-4747
Jack Plane

5110-21-639-4873
Hand File

5110-21-639-4820
File Cleaner Brush

5110-12-120-9453
Hand File

5110-21-105-2180
Hand Reamer

5110-21-105-2373
Keyhole Saw

5110-21-105-2191
Hand Reamer

5110-21-105-1919
Block Plane

5110-22-221-4595
Hand Cold Chisel

5110-22-221-4659
Double Bow Cutting Punch

5110-21-805-6046
Hand Cold Chisel

5110-14-235-6975
Pliers

5110-22-121-4791
End Cutting Nippers

5110-14-235-6981
Hand Metal Cutting Shears

5110-99-138-1317
Firmer Chisel

5110-25-140-2881
Double Bow Cutting Punch

5110-25-151-8365
Pocket Knife

5110-21-109-0486
Knockout Punch And Die

5110-22-607-0695
Dimpling Die

5110-22-115-2514
Hand Cold Chisel

5110-22-121-4807
Hand Metal Cutting Shears

5110-22-603-7228
Hand File

5110-12-120-9330
Hand File

5110-14-256-8858
Double Bow Cutting Punch

5110-66-156-3436
Hand Reamer

5110-98-104-7799
Firmer Chisel

5110-14-373-7836
End Cutting Nippers

5110-21-803-6955
Hand Reamer

5110-98-104-7585
Hand File

5110-25-103-5091
Hand Reamer

5110-99-347-9307
Hand Wire Stripper

5110-25-104-8163
Craftsman's Knife

5110-12-121-4338
Firmer Chisel

NSN 5110-01-451-4943 014514943 KNIFE,POCKET

5110-01-451-4943
Pocket Knife

014514943
05785: RNCC: 3 | RNVC: 2
APPLEGATE-FAIRBAIRN COVERT: RNCC: 5 | RNVC: 1

17 Dec 1997

5110-25-200-1351
Hand Graver

5110-00-221-1503
End Cutting Nippers

002211503
B107.500: RNCC: 3 | RNVC: 1
5110-00-221-1503: RNCC: 5 | RNVC: 1
B107.500 CAT 11 TY4CL3: RNCC: 5 | RNVC: 1
GGG-N-350: RNCC: 5 | RNVC: 9
B107.11 TY4CL3: RNCC: 5 | RNVC: 9
GGG-P-471: RNCC: 5 | RNVC: 9
GGG-N-350 TY4STCSZ4-1/2: RNCC: 5 | RNVC: 9
B107.11: RNCC: 5 | RNVC: 9
40716: RNCC: 5 | RNVC: 9
616: RNCC: 5 | RNVC: 9

1 Jan 1963

NSN 5110-01-367-7278 013677278 CUTTER,CABLE,HAND OPERATED

5110-01-367-7278
Hand Operated Cable Cutter

013677278
63050: RNCC: 3 | RNVC: 2
0890CSJ: RNCC: 5 | RNVC: 2
J63050: RNCC: 5 | RNVC: 2
KLE 63050: RNCC: 5 | RNVC: 2
911: RNCC: 5 | RNVC: 2

18 Nov 1992

5110-01-701-8950
Hand Reamer

017018950
TD525C1-92: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-8979
Hand Reamer

017018979
TD525C1-65: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-8954
Hand Reamer

017018954
TD525C1-48: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-9371
Hand Reamer

017019371
TD525C1-78: RNCC: 3 | RNVC: 2

17 Jun 2022

5110-01-701-8974
Hand Reamer

017018974
TD525C1-58: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-8947
Hand Reamer

017018947
TD525C1-85: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-8941
Hand Reamer

017018941
TD525C1-93: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-8938
Hand Reamer

017018938
TD525C1-104: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-7129
Hand File

017017129
31.659: RNCC: 3 | RNVC: 2
60237302: RNCC: 5 | RNVC: 2

3 Jun 2022

5110-01-698-7763
Hand Optical Fiber Cleaving Tool

016987763
FSTP0009: RNCC: 3 | RNVC: 2

7 Dec 2021

NSN 5110-01-430-5039 014305039 MULTI-TOOL,FOLDING,POCKET

5110-01-430-5039
Pocket Folding Multi-Tool

014305039
831105: RNCC: 3 | RNVC: 2
SUPER TOOL 300-BLK/MOLLE L-BLK/B: RNCC: 3 | RNVC: 2
WB/0000350: RNCC: 5 | RNVC: 2
M000062: RNCC: 5 | RNVC: 2
SUPER TOOL/BLACK/CAP/NYLON: RNCC: 5 | RNVC: 9
63040201: RNCC: 5 | RNVC: 9
5120PL1877458: RNCC: 6 | RNVC: 9

30 Apr 1996

5110-01-429-7376
Hand Wire Stripper-Crimper

014297376
B107.500: RNCC: 3 | RNVC: 1
PWC28A: RNCC: 3 | RNVC: 2
B107.500 CAT 37 TY2CL3: RNCC: 5 | RNVC: 1
302073: RNCC: 5 | RNVC: 2
ZLW0358-21: RNCC: 5 | RNVC: 2
ZHVY0390-21: RNCC: 5 | RNVC: 2
PWC28: RNCC: 5 | RNVC: 9

17 Apr 1996

5110-01-428-5292
Coping Saw Blade

014285292
15-059: RNCC: 3 | RNVC: 2
GGG-B-471: RNCC: 4 | RNVC: 1
GGG-B-471 TY1CL2: RNCC: 5 | RNVC: 1
GGG-B-471 TY1CL1: RNCC: 5 | RNVC: 1
3Q040: RNCC: 5 | RNVC: 2
15-059: RNCC: 5 | RNVC: 2

27 Mar 1996

5110-01-708-7853
Hand Drill

017087853
3697-22: RNCC: 3 | RNVC: 2

22 Apr 2023

NSN 5110-01-430-6031 014306031 BLADE,HAND HACKSAW

5110-01-430-6031
Hand Hacksaw Blade

014306031
B94.52M: RNCC: 3 | RNVC: 1
15-922A: RNCC: 3 | RNVC: 2
5R893: RNCC: 5 | RNVC: 2
15-922A: RNCC: 5 | RNVC: 2

2 May 1996

NSN 5110-12-120-5232 121205232 PLIERS,DIAGONAL CUTTING

5110-12-120-5232
Diagonal Cutting Pliers

121205232
40-116-C2-A3: RNCC: 3 | RNVC: 2
40-160-A3: RNCC: 3 | RNVC: 2
40-160-G-A2: RNCC: 3 | RNVC: 2
28.16: RNCC: 3 | RNVC: 2
2674NB: RNCC: 3 | RNVC: 2
4060-3CPI: RNCC: 3 | RNVC: 2
204493160: RNCC: 3 | RNVC: 2
5322020: RNCC: 3 | RNVC: 2
12110165-CPI: RNCC: 3 | RNVC: 2
72311-160: RNCC: 5 | RNVC: 2

30 May 1969

NSN 5110-01-089-1240 010891240 PLIERS,DIAGONAL CUTTING

5110-01-089-1240
Diagonal Cutting Pliers

010891240
B107.500: RNCC: 3 | RNVC: 1
D248-8: RNCC: 3 | RNVC: 2
B107.500 CAT 11 TY1CL1: RNCC: 5 | RNVC: 1
338: RNCC: 5 | RNVC: 2
00054536: RNCC: 5 | RNVC: 2
KLE D248-8-INS: RNCC: 5 | RNVC: 2
B107.11 TY3STA: RNCC: 5 | RNVC: 9
B107.11 TY1CL1: RNCC: 5 | RNVC: 9
10812: RNCC: 5 | RNVC: 9
B107.11: RNCC: 5 | RNVC: 9

25 Jan 1980

5110-01-430-5048
Pocket Folding Multi-Tool

014305048
5110-01-430-5048: RNCC: 3 | RNVC: 1
63040101: RNCC: 5 | RNVC: 9
SUPER TOOL/BLACK/CAP/LEATHER: RNCC: 5 | RNVC: 9

30 Apr 1996

5110-01-429-7301
Carpenter's Square

014297301
A-A-2322: RNCC: 4 | RNVC: 1
A-A-2322 TY1: RNCC: 5 | RNVC: 1
10T: RNCC: 5 | RNVC: 2

17 Apr 1996

5110-00-903-2506
Inclosed Blade Tube Deburring Tool

009032506
MS-TDT-24: RNCC: 3 | RNVC: 2
208-FSS: RNCC: 3 | RNVC: 9
208-FSS: RNCC: 5 | RNVC: 9

1 Jan 1960

5110-01-368-3507
Spring Action Scissors

013683507
KT173110: RNCC: 3 | RNVC: 2
9911 7097: RNCC: 3 | RNVC: 2
KTI-73110: RNCC: 5 | RNVC: 2

30 Nov 1992

NSN 5110-01-335-1418 013351418 CHISEL,COLD,HAND

5110-01-335-1418
Hand Cold Chisel

013351418
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1
PPC816B: RNCC: 5 | RNVC: 2
ZHVY0064: RNCC: 5 | RNVC: 2
ZLW0081: RNCC: 5 | RNVC: 2
B107.48: RNCC: 5 | RNVC: 9
PPC816A: RNCC: 5 | RNVC: 9
B107.48 TY1CL2: RNCC: 5 | RNVC: 9

6 Mar 1991

5110-00-241-9152
Hand File

002419152
A-A-2312: RNCC: 4 | RNVC: 1
A-A-2312 TY3: RNCC: 5 | RNVC: 1
13068: RNCC: 5 | RNVC: 2
04960N: RNCC: 5 | RNVC: 2
04960: RNCC: 5 | RNVC: 9
GGG-F-325 TY9STC: RNCC: 5 | RNVC: 9
04960: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-203-4941
Hand File

002034941
A-A-2312: RNCC: 4 | RNVC: 1
A-A-2312 TY2: RNCC: 5 | RNVC: 1
05125N: RNCC: 5 | RNVC: 2
13051: RNCC: 5 | RNVC: 2
05125: RNCC: 5 | RNVC: 9
GGG-F-325 TY9STB: RNCC: 5 | RNVC: 9
05125: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-203-5486
Hand File

002035486
A-A-2311: RNCC: 4 | RNVC: 1
A-A-2311 TY1: RNCC: 5 | RNVC: 1
03863: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY7STA: RNCC: 5 | RNVC: 9
03863: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-516-3815
Hand Reamer

005163815
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
207-2-0.1250: RNCC: 5 | RNVC: 9
GGG-R-180 TY6GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-236-3273
Hand Cold Chisel

002363273
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1
10216: RNCC: 5 | RNVC: 1
MAY 10216: RNCC: 5 | RNVC: 2
G10-3273: RNCC: 5 | RNVC: 2
11108: RNCC: 5 | RNVC: 2
32507: RNCC: 5 | RNVC: 2
C-28: RNCC: 5 | RNVC: 2
516059-12: RNCC: 5 | RNVC: 2
B107.48 TY1CL2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-304-0782
Metal Cutting Hand Saw

013040782
K145: RNCC: 3 | RNVC: 2
5110-01-304-0782: RNCC: 3 | RNVC: 2
80965: RNCC: 5 | RNVC: 2
NIC 80965: RNCC: 5 | RNVC: 2
0421-90-2000-06: RNCC: 5 | RNVC: 2
67818: RNCC: 5 | RNVC: 2
LEN20918: RNCC: 5 | RNVC: 2
300: RNCC: 5 | RNVC: 2
K145: RNCC: 5 | RNVC: 2
03651812: RNCC: 5 | RNVC: 2

11 Jul 1989

NSN 5110-00-288-6520 002886520 CUTTER,TUBE

5110-00-288-6520
Tube Cutter

002886520
5110-00-288-6520: RNCC: 3 | RNVC: 2
TCCTLRG: RNCC: 3 | RNVC: 2
FRS TC-28C: RNCC: 3 | RNVC: 2
TC160: RNCC: 5 | RNVC: 2
TC28B: RNCC: 5 | RNVC: 2
150: RNCC: 5 | RNVC: 2
ZLW0289-9: RNCC: 5 | RNVC: 2
ZHVY0334-9: RNCC: 5 | RNVC: 2
8139456: RNCC: 5 | RNVC: 2
105: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-219-8399
Hand Reamer

002198399
J-01243-A: RNCC: 3 | RNVC: 2
8194041-HK: RNCC: 3 | RNVC: 2
10513857: RNCC: 3 | RNVC: 2
5344968: RNCC: 5 | RNVC: 2
J-1243: RNCC: 5 | RNVC: 9
3223913: RNCC: 5 | RNVC: 9
PTJ1243: RNCC: 5 | RNVC: 9
3223913: RNCC: 5 | RNVC: 9
5110002198399: RNCC: 5 | RNVC: 9
J-1243-01: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-260-1664
Hand Reamer

002601664
B94.2: RNCC: 3 | RNVC: 1
712-045616: RNCC: 5 | RNVC: 2
21235: RNCC: 5 | RNVC: 2
C24441: RNCC: 5 | RNVC: 2
R100 0635: RNCC: 5 | RNVC: 2
101-0-0.2500: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
A-A-2928: RNCC: 5 | RNVC: 9
103HS 1/4 IN.: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-14-210-5450
Hand File

142105450
E75001LE200B: RNCC: 2 | RNVC: 2
TRI.MD200: RNCC: 3 | RNVC: 2
0912200201: RNCC: 3 | RNVC: 2
102442: RNCC: 5 | RNVC: 2
3148516047809: RNCC: 5 | RNVC: 2
TRIMD200: RNCC: 5 | RNVC: 2
912-200DD: RNCC: 5 | RNVC: 2
91355334: RNCC: 5 | RNVC: 2
91455370: RNCC: 5 | RNVC: 2
0714 61 20: RNCC: 5 | RNVC: 2

1 Jan 1964

NSN 5110-00-878-6519 008786519 PLIERS,DIAGONAL CUTTING

5110-00-878-6519
Diagonal Cutting Pliers

008786519
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 22 TY1CL1STB: RNCC: 5 | RNVC: 1
MS543J: RNCC: 5 | RNVC: 2
B107.22 TY1CL1STB: RNCC: 5 | RNVC: 9
B107.22: RNCC: 5 | RNVC: 9
951-4SCE: RNCC: 5 | RNVC: 9
47-4JCS: RNCC: 5 | RNVC: 9
13214-25: RNCC: E | RNVC: 8
46-4CJS: RNCC: E | RNVC: 8

15 Sep 1967

5110-14-204-8349
Hand File

142048349
E75001LA300B: RNCC: 2 | RNVC: 2
PAM.MD300: RNCC: 3 | RNVC: 2
0900300201: RNCC: 3 | RNVC: 2
900-300DD: RNCC: 3 | RNVC: 2
E75-001PLATEAMAINDEMID0UCE300: RNCC: 5 | RNVC: 2
3148516005403: RNCC: 5 | RNVC: 2
PAMMD300: RNCC: 5 | RNVC: 2
0714 61 08: RNCC: 5 | RNVC: 2
102476: RNCC: 5 | RNVC: 2
0600540: RNCC: 5 | RNVC: 9

1 Jan 1963

NSN 5110-00-273-0126 002730126 SHEARS,METAL CUTTING,HAND

5110-00-273-0126
Hand Metal Cutting Shears

002730126
B107.500: RNCC: 3 | RNVC: 1
M1R: RNCC: 3 | RNVC: 2
101: RNCC: 3 | RNVC: 2
2073111: RNCC: 3 | RNVC: 2
111: RNCC: 3 | RNVC: 2
B107.500 CAT 16 TY2CL3: RNCC: 5 | RNVC: 1
0728 6306: RNCC: 5 | RNVC: 2
M-1R COOPER/WISS: RNCC: 5 | RNVC: 2
WIS M1R: RNCC: 5 | RNVC: 2
2073111: RNCC: 5 | RNVC: 9

1 Jan 1963

NSN 5110-01-428-5452 014285452 BLADE,HAND HACKSAW

5110-01-428-5452
Hand Hacksaw Blade

014285452
B94.52M: RNCC: 3 | RNVC: 1
15-412: RNCC: 3 | RNVC: 2
5R831: RNCC: 5 | RNVC: 2
15-412: RNCC: 5 | RNVC: 2

27 Mar 1996

5110-01-700-7641
Hand Operated Cable Cutter

017007641
776: RNCC: 3 | RNVC: 2
1209500130: RNCC: 7 | RNVC: 2

12 Apr 2022

5110-01-701-8961
Hand Reamer

017018961
TD525C1-52: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-8973
Hand Reamer

017018973
TD525C1-57: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-8945
Hand Reamer

017018945
TD525C1-84: RNCC: 3 | RNVC: 2
TD525C1-84: RNCC: 5 | RNVC: 2

14 Jun 2022

5110-01-701-9376
Hand Reamer

017019376
TD525C1-82: RNCC: 3 | RNVC: 2

17 Jun 2022

5110-01-702-1320
Hand Operated Wire Rope Cutter

017021320
12594689: RNCC: 3 | RNVC: 2

22 Jun 2022

5110-14-271-6141
Hand File

142716141
E75001LA300C: RNCC: 2 | RNVC: 2
0900300301: RNCC: 3 | RNVC: 2
900-300D: RNCC: 3 | RNVC: 2
0900300304: RNCC: 3 | RNVC: 2
101-DX-300: RNCC: 3 | RNVC: 2
PAM.D300: RNCC: 3 | RNVC: 2
PAM D 300: RNCC: 5 | RNVC: 2
5011330: RNCC: 5 | RNVC: 2
0714 61 13: RNCC: 5 | RNVC: 2
3148516007506: RNCC: 5 | RNVC: 2

1 Jan 1970

NSN 5110-00-224-7053 002247053 CUTTER,WIRE ROPE,HAND OPERATED

5110-00-224-7053
Hand Operated Wire Rope Cutter

002247053
A-A-3047: RNCC: 4 | RNVC: 1
A-A-3047 CL4: RNCC: 5 | RNVC: 1
HKP 1490MTN: RNCC: 5 | RNVC: 2
1490MTN: RNCC: 5 | RNVC: 2
HITWC06: RNCC: 5 | RNVC: 2
GGG-C-740: RNCC: 5 | RNVC: 9
GGG-C-740 TY2CL6: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-260-1671
Hand Reamer

002601671
B94.2: RNCC: 3 | RNVC: 1
712-045962: RNCC: 5 | RNVC: 2
C24496: RNCC: 5 | RNVC: 2
21240: RNCC: 5 | RNVC: 2
R100 1032: RNCC: 5 | RNVC: 2
103HS 13/32 IN.: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
A-A-2928: RNCC: 5 | RNVC: 9
101-0-0.4062: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-699-4700
Enclosed Blade Tube Deburring Tool

016994700
YB-03750: RNCC: 3 | RNVC: 2
BA0375: RNCC: 5 | RNVC: 2
BA0375: RNCC: 5 | RNVC: 9

2 Feb 2022

5110-01-699-5710
Enclosed Blade Tube Deburring Tool

016995710
YB-04062: RNCC: 3 | RNVC: 2
BA0406: RNCC: 5 | RNVC: 2
BA0406: RNCC: 5 | RNVC: 9

9 Feb 2022

5110-00-241-9149
Hand File

002419149
A-A-2312: RNCC: 4 | RNVC: 1
A-A-2312 TY3: RNCC: 5 | RNVC: 1
04861NN: RNCC: 5 | RNVC: 2
04861: RNCC: 5 | RNVC: 9
GGG-F-325 TY9STC: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
04861: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-7556
Hand File

002397556
73-51850: RNCC: 3 | RNVC: 2
A-A-2322: RNCC: 4 | RNVC: 1
A-A-2322 TY2: RNCC: 5 | RNVC: 1
07081802: RNCC: 5 | RNVC: 2
SIM 73-51850: RNCC: 5 | RNVC: 2
16069N: RNCC: 5 | RNVC: 2
16069: RNCC: 5 | RNVC: 2
73-51850 SIMONDS: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
16069: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-699-5127
Enclosed Blade Tube Deburring Tool

016995127
YB-03438: RNCC: 3 | RNVC: 2
BA0343: RNCC: 5 | RNVC: 2
BA0343: RNCC: 5 | RNVC: 9

4 Feb 2022

5110-00-952-9111
Finger Ring Twine Knife

009529111
45908: RNCC: 3 | RNVC: 2
GSA PD-264: RNCC: 5 | RNVC: 1
45908: RNCC: 5 | RNVC: 2
POD-K-264: RNCC: 5 | RNVC: 9
0317B: RNCC: 5 | RNVC: 9

1 Jan 1960

5110-01-300-2463
Hand File

013002463
37416: RNCC: 3 | RNVC: 2
5NRB: RNCC: 3 | RNVC: 2
31.540: RNCC: 3 | RNVC: 2
06825764: RNCC: 5 | RNVC: 2
5NR: RNCC: 5 | RNVC: 9
37416: RNCC: 5 | RNVC: 9
5NRA: RNCC: 5 | RNVC: 9

12 May 1989

5110-01-709-0720
Metal Cutter Blade

017090720
BCX30-BLADES/BC24: RNCC: 3 | RNVC: 2
11316 BLADE UNIT: RNCC: 3 | RNVC: 9

10 May 2023

5110-01-708-6617
Pocket Knife

017086617
535SBK-2: RNCC: 3 | RNVC: 2

14 Apr 2023

5110-01-708-3036
Electricians' Scissors

017083036
JIC-183: RNCC: 3 | RNVC: 9

28 Mar 2023

5110-14-201-9921
Hand Hacksaw Blade

142019921
E73-072-300X13X0-65X0-8DURSUPHSS: RNCC: 2 | RNVC: 2
3801-12: RNCC: 3 | RNVC: 2
ULTRASUPERRAPIDE300-12: RNCC: 3 | RNVC: 9
E73-071-300X13X0-65-0-8: RNCC: 5 | RNVC: 2
0192040: RNCC: 5 | RNVC: 2
3148511920398: RNCC: 5 | RNVC: 2
666-12: RNCC: 5 | RNVC: 2
666.12: RNCC: 5 | RNVC: 2
91569758: RNCC: 5 | RNVC: 2
176-1605: RNCC: 5 | RNVC: 2

1 Jan 1962

5110-01-707-7381
Scraping Knife

017077381
46A910: RNCC: 3 | RNVC: 2
46A910: RNCC: 5 | RNVC: 2

19 Feb 2023

5110-01-604-4866
Thread Restorer File

016044866
TFM7530B: RNCC: 3 | RNVC: 1
ZHVY0335-3: RNCC: 5 | RNVC: 2
ZLW0290-3: RNCC: 5 | RNVC: 2
11A7000169-2: RNCC: 5 | RNVC: 2
FRS TFM7530B: RNCC: 5 | RNVC: 9

6 Apr 2012

5110-01-604-4859
Thread Restorer File

016044859
TF1124B: RNCC: 3 | RNVC: 1
11A7000169-1: RNCC: 5 | RNVC: 2
ZLW0290-1: RNCC: 5 | RNVC: 2
ZHVY0335-1: RNCC: 5 | RNVC: 2
FRS TF1124B: RNCC: 5 | RNVC: 9

6 Apr 2012

5110-14-202-2363
Hand File

142022363
E75001LA200A: RNCC: 2 | RNVC: 2
0900200101: RNCC: 3 | RNVC: 2
900-200B: RNCC: 3 | RNVC: 2
PAM.B200EM: RNCC: 3 | RNVC: 2
0900200104: RNCC: 3 | RNVC: 2
101-BAT-200: RNCC: 3 | RNVC: 2
E75-001PLATEAMAINBATARDE200: RNCC: 5 | RNVC: 2
3148516507006: RNCC: 5 | RNVC: 2
130333: RNCC: 5 | RNVC: 2
PAMB200EM: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-203-4751
Hand File

002034751
A-A-2320: RNCC: 4 | RNVC: 1
13000N: RNCC: 5 | RNVC: 2
13000: RNCC: 5 | RNVC: 9
13000: RNCC: 5 | RNVC: 9
GGG-F-325 TY17STB: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

NSN 5110-00-273-0128 002730128 SHEARS,METAL CUTTING,HAND

5110-00-273-0128
Hand Metal Cutting Shears

002730128
B107.500: RNCC: 3 | RNVC: 1
103: RNCC: 3 | RNVC: 2
2073113: RNCC: 3 | RNVC: 2
B107.500 CAT 16 TY2CL1STA: RNCC: 5 | RNVC: 1
2073113: RNCC: 5 | RNVC: 9
GGG-S-291: RNCC: 5 | RNVC: 9
B107.16: RNCC: 5 | RNVC: 9
103: RNCC: 5 | RNVC: 9
2073113: RNCC: 5 | RNVC: 9
103: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-289-9657
Hand Hacksaw Frame

002899657
5110-00-289-9657: RNCC: 3 | RNVC: 2
00181: RNCC: 5 | RNVC: 1
MF1237: RNCC: 5 | RNVC: 1
3494184: RNCC: 5 | RNVC: 2
GGG-F-671 TY1CL1STB: RNCC: 5 | RNVC: 9
GGG-F-671: RNCC: 5 | RNVC: 9
A-A-453: RNCC: 5 | RNVC: 9
41F3394: RNCC: 5 | RNVC: 9
163-20: RNCC: 5 | RNVC: 9
3494184: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-14-370-1180
Hand Wire Stripper

143701180
240-16G: RNCC: 3 | RNVC: 2
194.17CPY: RNCC: 3 | RNVC: 2
240-16-G: RNCC: 3 | RNVC: 2
194-17CPY: RNCC: 5 | RNVC: 2
162-8340: RNCC: 5 | RNVC: 2
0714 01 50: RNCC: 5 | RNVC: 2
FACOM 194-17CPY: RNCC: 5 | RNVC: 2
91634531: RNCC: 5 | RNVC: 2
H24179: RNCC: 5 | RNVC: 2
3148511450000: RNCC: 5 | RNVC: 2

18 May 1981

5110-14-298-5467
Hand Hacksaw Blade

142985467
E73-072-300X13X0-65X1S0UPLE HSS: RNCC: 2 | RNVC: 2
3805-10: RNCC: 3 | RNVC: 2
0188040: RNCC: 3 | RNVC: 2
ULTRAMAJ0R300-10: RNCC: 3 | RNVC: 9
4355-10: RNCC: 3 | RNVC: 9
352LI0N10: RNCC: 5 | RNVC: 2
E73-071-300X13X0-65X1S0UPLE: RNCC: 5 | RNVC: 2
600-10: RNCC: 5 | RNVC: 2
600.10: RNCC: 5 | RNVC: 2
DEMULTRAMAJ0R300-10: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-01-604-4855
Metal Cutting Hand Saw

016044855
701-S: RNCC: 3 | RNVC: 1
ZLW0009: RNCC: 5 | RNVC: 2
ZHVY0045: RNCC: 5 | RNVC: 2
FRS 701S: RNCC: 5 | RNVC: 9

6 Apr 2012

5110-01-300-2457
Hand File

013002457
37696: RNCC: 3 | RNVC: 2
31.604: RNCC: 3 | RNVC: 2
5NSB: RNCC: 3 | RNVC: 2
NF-S-5#0: RNCC: 3 | RNVC: 2
60236106: RNCC: 5 | RNVC: 2
37696: RNCC: 5 | RNVC: 9
5NS: RNCC: 5 | RNVC: 9

12 May 1989

5110-00-965-0608
Hand File

009650608
70502: RNCC: 3 | RNVC: 2
02230: RNCC: 3 | RNVC: 2
NFES 0345: RNCC: 5 | RNVC: 2
LC6678-8-7/32: RNCC: 5 | RNVC: 2
A-A-2319: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
01876: RNCC: 5 | RNVC: 9
62648: RNCC: 5 | RNVC: 9
01876: RNCC: 5 | RNVC: 9
02230: RNCC: 5 | RNVC: 9

1 Jan 1960

5110-00-221-1087
Hand Metal Cutting Shears

002211087
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 16 TY1CL2: RNCC: 5 | RNVC: 1
160: RNCC: 5 | RNVC: 2
0728 4405: RNCC: 5 | RNVC: 2
23: RNCC: 5 | RNVC: 2
212: RNCC: 5 | RNVC: 2
CD12A: RNCC: 5 | RNVC: 2
3916: RNCC: 5 | RNVC: 2
ZLW0270: RNCC: 5 | RNVC: 2
ZHVY0325: RNCC: 5 | RNVC: 2

1 Jan 1963

NSN 5110-00-234-6526 002346526 FILE,HAND

5110-00-234-6526
Hand File

002346526
14106MN: RNCC: 3 | RNVC: 2
A-A-2321: RNCC: 4 | RNVC: 1
A-A-2321 TY2: RNCC: 5 | RNVC: 1
14106M: RNCC: 5 | RNVC: 9
14106: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
14106: RNCC: 5 | RNVC: 9
GGG-F-325 TY18CL2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-710-7370
Knife Blade

017107370
4932480108: RNCC: 3 | RNVC: 2

21 Jun 2023

NSN 5110-01-428-5313 014285313 BLADE,HAND HACKSAW

5110-01-428-5313
Hand Hacksaw Blade

014285313
B94.52M: RNCC: 3 | RNVC: 1
15-828A: RNCC: 3 | RNVC: 2
15-828A: RNCC: 5 | RNVC: 2
5R881: RNCC: 5 | RNVC: 2

27 Mar 1996

5110-00-203-4854
Hand File

002034854
A-A-2311: RNCC: 4 | RNVC: 1
A-A-2311 TY2: RNCC: 5 | RNVC: 1
0707 4709: RNCC: 5 | RNVC: 2
03896: RNCC: 5 | RNVC: 2
GGG-F-325 TY7STB: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
03896: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-365-8671
Hand File

013658671
A-A-2322: RNCC: 4 | RNVC: 1
A-A-2322 TY2: RNCC: 5 | RNVC: 1
73-51700: RNCC: 5 | RNVC: 2
73-51700 SIMONDS: RNCC: 5 | RNVC: 2

15 Oct 1992

NSN 5110-01-367-4650 013674650 PLIERS,DIAGONAL CUTTING

5110-01-367-4650
Diagonal Cutting Pliers

013674650
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 11 TY1CL1: RNCC: 5 | RNVC: 1
86ACF: RNCC: 5 | RNVC: 1
2101D-160: RNCC: 5 | RNVC: 2
9/LTT 237 03: RNCC: 5 | RNVC: 2
86BCP: RNCC: 5 | RNVC: 2
86CF: RNCC: 5 | RNVC: 2
86ACF: RNCC: 5 | RNVC: 2
86ACF: RNCC: 5 | RNVC: 2
B107.11 TY1CL1: RNCC: 5 | RNVC: 9

12 Nov 1992

5110-01-365-0036
Hand Hacksaw Blade

013650036
B94.52M: RNCC: 3 | RNVC: 1
1218UL: RNCC: 3 | RNVC: 2
1218UL RULE INDUSTRIES: RNCC: 5 | RNVC: 2
E0200618: RNCC: 5 | RNVC: 2
1218UL: RNCC: 5 | RNVC: 9

29 Sep 1992

5110-01-349-4830
File Handle

013494830
GA98A: RNCC: 3 | RNVC: 2
ZHVY0071: RNCC: 5 | RNVC: 2
ZLW0088: RNCC: 5 | RNVC: 2
GA98: RNCC: 5 | RNVC: 9

26 Nov 1991

5110-00-423-0720
Hand File

004230720
A-A-2321: RNCC: 4 | RNVC: 1
A-A-2321 TY2: RNCC: 5 | RNVC: 1
14162M: RNCC: 5 | RNVC: 2
GGG-F-325 TY18CL1: RNCC: 5 | RNVC: 9
14162: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
14162: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-400-1418
Hand Metal Cutting Shears

014001418
B107.500: RNCC: 3 | RNVC: 1
010: RNCC: 3 | RNVC: 2
22010: RNCC: 3 | RNVC: 2
B107.500 CAT 16 TY1CL1STA: RNCC: 5 | RNVC: 1
M300: RNCC: 5 | RNVC: 2
M300 COOPER/WISS: RNCC: 5 | RNVC: 2
J320: RNCC: 5 | RNVC: 2
3R298: RNCC: 5 | RNVC: 2
M300: RNCC: 5 | RNVC: 2
22010: RNCC: 5 | RNVC: 9

9 Dec 1994

5110-00-234-1927
Hand Cold Chisel

002341927
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1
41C1099: RNCC: 5 | RNVC: 2
MAY 10200: RNCC: 5 | RNVC: 2
10200: RNCC: 5 | RNVC: 2
11100: RNCC: 5 | RNVC: 2
32501: RNCC: 5 | RNVC: 2
19064: RNCC: 5 | RNVC: 2
GGG-C-313: RNCC: 5 | RNVC: 9
B107.48: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-8253
Diagonal Cutting Pliers

002398253
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 11 TY1CL1: RNCC: 5 | RNVC: 1
86ACFCT: RNCC: 5 | RNVC: 2
108286: RNCC: 5 | RNVC: 2
86P: RNCC: 5 | RNVC: 2
86CP: RNCC: 5 | RNVC: 2
86ACFCT: RNCC: 5 | RNVC: 2
108286: RNCC: 5 | RNVC: 9
GGG-P-468 TY1CL1: RNCC: 5 | RNVC: 9
GGG-P-468: RNCC: 5 | RNVC: 9

1 Jan 1963

NSN 5110-00-595-8402 005958402 KNIFE,CRAFTSMAN'S

5110-00-595-8402
Craftsman's Knife

005958402
5110-00-595-8402: RNCC: 3 | RNVC: 2
M28: RNCC: 5 | RNVC: 2
GGG-K-481: RNCC: 5 | RNVC: 9
GGG-K-481 TY2CL1ST1: RNCC: 5 | RNVC: 9
ZLW0303-6: RNCC: 5 | RNVC: 9
ZHVY0397-6: RNCC: 5 | RNVC: 9

1 Jan 1963

NSN 5110-00-585-8431 005858431 CHISEL,BUTT,WOODWORKING

5110-00-585-8431
Woodworking Butt Chisel

005858431
B107.410: RNCC: 3 | RNVC: 1
1048: RNCC: 5 | RNVC: 1
B107.410 CAT 44 TY2: RNCC: 5 | RNVC: 1
GNK 1048: RNCC: 5 | RNVC: 2
108BC: RNCC: 5 | RNVC: 2
16-910: RNCC: 5 | RNVC: 9
GGG-C-311 TY1CL3: RNCC: 5 | RNVC: 9
GGG-C-311: RNCC: 5 | RNVC: 9
B107.44: RNCC: 5 | RNVC: 9
108BC: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-699-5716
Enclosed Blade Tube Deburring Tool

016995716
YB-04375: RNCC: 3 | RNVC: 2
BA0437: RNCC: 5 | RNVC: 2
BA0437: RNCC: 5 | RNVC: 9

9 Feb 2022

5110-01-699-5549
Enclosed Blade Tube Deburring Tool

016995549
YB-05938: RNCC: 3 | RNVC: 2
BA0593: RNCC: 5 | RNVC: 2
BA0593: RNCC: 5 | RNVC: 9

8 Feb 2022

5110-01-618-1847
Thread Restorer File Set

016181847
TFTFM932A: RNCC: 3 | RNVC: 2
ZLW0290: RNCC: 5 | RNVC: 2
ZHVY0335: RNCC: 5 | RNVC: 2

16 Apr 2013

NSN 5110-00-585-8432 005858432 CHISEL,BUTT,WOODWORKING

5110-00-585-8432
Woodworking Butt Chisel

005858432
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 44 TY2: RNCC: 5 | RNVC: 1
109BC: RNCC: 5 | RNVC: 2
16-911: RNCC: 5 | RNVC: 2
16-911: RNCC: 5 | RNVC: 2
1049: RNCC: 5 | RNVC: 2
109BC: RNCC: 5 | RNVC: 9
GGG-C-311: RNCC: 5 | RNVC: 9
B107.44: RNCC: 5 | RNVC: 9
B107.44 TY2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-706-8429
Hand Optical Fiber Cleaving Tool

017068429
JIC-186: RNCC: 3 | RNVC: 9

22 Dec 2022

5110-01-701-8937
Hand Reamer

017018937
TD525C1-101: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-14-244-9039
Hand Cape Chisel

142449039
265.18: RNCC: 3 | RNVC: 2
4-175: RNCC: 3 | RNVC: 2
7211180001: RNCC: 3 | RNVC: 2
265-18: RNCC: 5 | RNVC: 2
3148511618004: RNCC: 5 | RNVC: 2
3272670267428: RNCC: 5 | RNVC: 2
SYQ0710: RNCC: 5 | RNVC: 2
0714 63 08: RNCC: 5 | RNVC: 2
130088: RNCC: 5 | RNVC: 2
91355124: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-01-641-9569
Diagonal Cutting Pliers

016419569
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 11 TY1CL1: RNCC: 5 | RNVC: 1
D228-8: RNCC: 5 | RNVC: 2
B107.11: RNCC: 5 | RNVC: 9
B107.11 TY1CL1: RNCC: 5 | RNVC: 9

9 Feb 2015

5110-01-474-0079
Knockout Punch And Die Set

014740079
KOW520: RNCC: 3 | RNVC: 2
GGG-P-836: RNCC: 4 | RNVC: 1
GGG-P-836 TY2: RNCC: 5 | RNVC: 1
81370: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-429-7306
Diagonal Cutting Pliers

014297306
B107.500: RNCC: 3 | RNVC: 1
87ACF: RNCC: 3 | RNVC: 2
B107.500 CAT 11 TY1CL1: RNCC: 5 | RNVC: 1
87ACF: RNCC: 5 | RNVC: 2
ZLW0266: RNCC: 5 | RNVC: 2
ZHVY0320: RNCC: 5 | RNVC: 2
87ACF: RNCC: 5 | RNVC: 2
B107.11: RNCC: 5 | RNVC: 9
87ACP: RNCC: 5 | RNVC: 9
87BCP: RNCC: 5 | RNVC: 9

17 Apr 1996

5110-01-336-5690
Hand File

013365690
A-A-2314: RNCC: 4 | RNVC: 1
A-A-2314 TY2: RNCC: 5 | RNVC: 1
73-50350: RNCC: 5 | RNVC: 2

27 Mar 1991

NSN 5110-00-293-1585 002931585 KNIFE,CRAFTSMAN'S

5110-00-293-1585
Craftsman's Knife

002931585
5110-00-293-1585: RNCC: 3 | RNVC: 2
19001: RNCC: 3 | RNVC: 2
GGG-K-00450: RNCC: 5 | RNVC: 9
PD56: RNCC: 5 | RNVC: 9
GGG-K-00450 TY1CL1ST1ST2ST3ST4: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-12-137-4107
Hand File

121374107
DIN7261-A350-1: RNCC: 2 | RNVC: 2
3112351: RNCC: 3 | RNVC: 2
510100-350: RNCC: 3 | RNVC: 2
1112-350-1: RNCC: 3 | RNVC: 2
01.76.56.02: RNCC: 5 | RNVC: 2
1112-350-1: RNCC: 5 | RNVC: 2
51010-350: RNCC: 5 | RNVC: 2
08-016-0: RNCC: 5 | RNVC: 2
A350-1DIN7261: RNCC: 5 | RNVC: 2
B350X1DIN8331: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-126-1390
Hand Cape Chisel

121261390
TL5110-0030-060: RNCC: 2 | RNVC: 2
BW3080-125: RNCC: 3 | RNVC: 2
62210125: RNCC: 3 | RNVC: 2
96-125: RNCC: 3 | RNVC: 2
RNN320125: RNCC: 3 | RNVC: 2
96-125: RNCC: 3 | RNVC: 9
RNN320125: RNCC: 5 | RNVC: 2
246125: RNCC: 5 | RNVC: 9
BW3080-125: RNCC: 5 | RNVC: 9
320125: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-126-1531
Bearing Scraper

121261531
TL5110-0035-010: RNCC: 2 | RNVC: 2
DIN8350-A200G: RNCC: 5 | RNVC: 1
40028: RNCC: 5 | RNVC: 9
4017981458207: RNCC: 5 | RNVC: 9
4522460: RNCC: 5 | RNVC: 9
458020: RNCC: 5 | RNVC: 9
4522460: RNCC: 5 | RNVC: 9
458020: RNCC: 5 | RNVC: 9
468-200: RNCC: 5 | RNVC: 9
468020: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-105-2221
Plate Spacer

5110-21-105-2368
Thrust Washer Bearing

5110-21-105-0057
Sleeve Bearing

5110-21-105-0043
Headless Straight Pin

5110-21-105-0670
Setscrew

5110-21-105-0702
Machine Screw

5110-00-172-3810
Asbestos Cement Pipe And Conduit Taper Joint Cutter

1 Sep 1972

5110-00-595-5314
Asbestos Cement Pipe And Conduit Taper Joint Cutter

1 Jan 1963

5110-21-840-0022
Toggle Switch

5110-00-180-0938
Single Bow Cutting Punch

001800938
5110-00-180-0938: RNCC: 3 | RNVC: 2
GGG-P-833: RNCC: 4 | RNVC: 1
GGG-P-833 TY1CLBST2SZ20: RNCC: 5 | RNVC: 1
1280A: RNCC: 5 | RNVC: 2
43856: RNCC: 5 | RNVC: 2
1280A: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-12-002-0091
Saucepan

5110-21-105-0203
Valve Cap

5110-99-423-8741
Hand Metal Stamping Die Set

5110-21-105-1312
Straight Shaft Assembly

5110-01-680-3374
Pocket Folding Multi-Tool

30 Apr 2019

5110-25-101-0783
Aircraft Seat Cushion Cover

5110-21-807-1459
Bargraph Meter

5110-22-111-1878
Hose Assembly

5110-01-699-5114
Enclosed Blade Tube Deburring Tool

016995114
YB-02500: RNCC: 3 | RNVC: 2
BA0250: RNCC: 5 | RNVC: 2
BA0250: RNCC: 5 | RNVC: 9

4 Feb 2022

5110-01-118-9036
Knife Blade Handle

13 Sep 1981

5110-01-428-5327
Miter Box Saw

27 Mar 1996

5110-01-582-8521
Hand Operated Wire Rope Cutter

015828521
PC7: RNCC: 3 | RNVC: 2
PC7: RNCC: 5 | RNVC: 2

10 Mar 2010

5110-25-149-9227
Baufil 701

251499227
74350109: RNCC: 3 | RNVC: 2

21 May 2003

5110-15-208-4536
Alesatore

152084536
3AARPERMDQ16: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-176-5996
Tronchesino Mini

151765996
LA120110: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-01-666-6183
Diagonal Cutting Pliers

13 Sep 2017

5110-00-571-4978
Boiler Tube Cutter

005714978
1628F5322: RNCC: 3 | RNVC: 2
1628F0PC5322: RNCC: 3 | RNVC: 2
1628FPC5322: RNCC: 5 | RNVC: 2

1 Jan 1961

5110-00-596-8490
Hand Reamer

005968490
B94.2: RNCC: 3 | RNVC: 1
764-0930-000: RNCC: 3 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
93RL: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-8496
Hand Reamer

005968496
B94.2: RNCC: 3 | RNVC: 1
764-1930-000: RNCC: 3 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
193RL: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-675-5525
Scraper Blade

17 Sep 2018

5110-01-541-0991
Pocket Folding Multi-Tool

15 Jun 2006

5110-01-484-2127
Enclosed Blade Tube Deburring Tool

23 Apr 2001

5110-01-708-6932
Tube Cutter

017086932
8288A52: RNCC: 3 | RNVC: 2

17 Apr 2023

5110-01-380-9381
Wire Stripper Blade Set

013809381
AS5768: RNCC: 3 | RNVC: 1
45-1924-1: RNCC: 3 | RNVC: 2
45-1924-1: RNCC: 3 | RNVC: 2
AWS124: RNCC: 3 | RNVC: 2
AS5768/1-B24: RNCC: 5 | RNVC: 1

30 Sep 1993

5110-01-710-9746
Pocket Knife

017109746
1891: RNCC: 3 | RNVC: 2
1891: RNCC: 5 | RNVC: 2

12 Jul 2023

5110-01-708-4801
Diagonal Cutting Pliers

017084801
BD6: RNCC: 3 | RNVC: 2

8 Apr 2023

5110-01-710-3641
Rip-Crosscut Hand Saw

017103641
46036: RNCC: 3 | RNVC: 2

30 May 2023

5110-01-710-2986
Knockout Punch And Die Set

017102986
Y690: RNCC: 3 | RNVC: 2

22 May 2023

NSN 5110-12-131-7971 121317971 STRIPPER,WIRE,HAND

5110-12-131-7971
Hand Wire Stripper

121317971
1101160: RNCC: 3 | RNVC: 2
66225160: RNCC: 3 | RNVC: 2
5762010: RNCC: 3 | RNVC: 2
48.16: RNCC: 3 | RNVC: 2
3417NF: RNCC: 3 | RNVC: 2
4003773013556: RNCC: 5 | RNVC: 2
00.15.09.54: RNCC: 5 | RNVC: 2
7314151072209: RNCC: 5 | RNVC: 2
183160: RNCC: 5 | RNVC: 9
66226160: RNCC: 5 | RNVC: 9

30 May 1969

NSN 5110-01-429-7374 014297374 STRIPPER,WIRE,HAND

5110-01-429-7374
Hand Wire Stripper

014297374
B107.500: RNCC: 3 | RNVC: 1
PWC24: RNCC: 3 | RNVC: 2
B107.500 CAT 37 TY1CL2: RNCC: 5 | RNVC: 1
PWC24: RNCC: 5 | RNVC: 2
5110PL1678836: RNCC: 6 | RNVC: 9

17 Apr 1996

5110-00-997-4237
Razor Blade Glass Scraper

009974237
5110-00-997-4237: RNCC: 3 | RNVC: 2
28-500: RNCC: 3 | RNVC: 2
0027 3564: RNCC: 5 | RNVC: 2
1061035-5: RNCC: 5 | RNVC: 2
02.20.08.86: RNCC: 5 | RNVC: 2
13050: RNCC: 5 | RNVC: 2
106: RNCC: 5 | RNVC: 2
IB80-200: RNCC: 5 | RNVC: 2
HS400: RNCC: 5 | RNVC: 9
GS: RNCC: 5 | RNVC: 9

15 Apr 1967

5110-00-585-8430
Woodworking Butt Chisel

005858430
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 44 TY2: RNCC: 5 | RNVC: 1
1047: RNCC: 5 | RNVC: 1
511000062: RNCC: 5 | RNVC: 2
107BC: RNCC: 5 | RNVC: 2
16-909: RNCC: 5 | RNVC: 2
16-909: RNCC: 5 | RNVC: 2
434.30: RNCC: 5 | RNVC: 2
GNK 1047: RNCC: 5 | RNVC: 2
B107.44: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-555-8868
Broad Hatchet

005558868
B107.400: RNCC: 3 | RNVC: 1
H-90FG: RNCC: 3 | RNVC: 2
H-74: RNCC: 3 | RNVC: 2
5110-00-555-8868: RNCC: 3 | RNVC: 2
B107.400 CAT 42 TY1CL2: RNCC: 5 | RNVC: 1
5110-00-555-8868: RNCC: 5 | RNVC: 9
GGG-H-131 TYF: RNCC: 5 | RNVC: 9
GGG-H-131: RNCC: 5 | RNVC: 9
H-90: RNCC: 5 | RNVC: 9
H-90: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-221-8132
Hand Cold Chisel

002218132
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT48 TY1CL2: RNCC: 5 | RNVC: 1
506: RNCC: 5 | RNVC: 2
MAY 10209: RNCC: 5 | RNVC: 2
1940706: RNCC: 5 | RNVC: 2
32505: RNCC: 5 | RNVC: 2
10209: RNCC: 5 | RNVC: 2
G10-8132: RNCC: 5 | RNVC: 2
11105: RNCC: 5 | RNVC: 2
506: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-241-9156
Hand File

002419156
A-A-2312: RNCC: 4 | RNVC: 1
A-A-2312 TY3: RNCC: 5 | RNVC: 1
13061: RNCC: 5 | RNVC: 2
05158N: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
05158: RNCC: 5 | RNVC: 9
05158: RNCC: 5 | RNVC: 9
GGG-F-325 TY9STC: RNCC: 5 | RNVC: 9

1 Jan 1963

NSN 5110-00-222-4400 002224400 CUTTER,GLASS

5110-00-222-4400
Glass Cutter

002224400
5110-00-222-4400: RNCC: 3 | RNVC: 2
210-1524: RNCC: 5 | RNVC: 2
102370: RNCC: 5 | RNVC: 2
GGG-C-751 TY1CL1MLB: RNCC: 5 | RNVC: 9
GGG-C-751: RNCC: 5 | RNVC: 9
024: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-234-6567
Hand File

002346567
A-A-2314: RNCC: 4 | RNVC: 1
A-A-2314 TY2: RNCC: 5 | RNVC: 1
06930N: RNCC: 5 | RNVC: 2
GGG-F-325 TY11STB: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
06930: RNCC: 5 | RNVC: 9
06930: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-241-9153
Hand File

002419153
73-32100: RNCC: 3 | RNVC: 2
A-A-2312: RNCC: 4 | RNVC: 1
A-A-2312 TY1: RNCC: 5 | RNVC: 1
73-32100 SIMONDS: RNCC: 5 | RNVC: 2
SIM 73-32100: RNCC: 5 | RNVC: 2
04995N: RNCC: 5 | RNVC: 2
04995: RNCC: 5 | RNVC: 9
GGG-F-325 TY9STA: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
41F932: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-098-4326
Knife Blade

000984326
5110-00-098-4326: RNCC: 3 | RNVC: 2
PE-000984326: RNCC: 5 | RNVC: 2
53B7130: RNCC: 5 | RNVC: 2
RKB-G: RNCC: 5 | RNVC: 9
10465549: RNCC: 6 | RNVC: 9

1 Jan 1963

NSN 5110-00-585-8433 005858433 CHISEL,BUTT,WOODWORKING

5110-00-585-8433
Woodworking Butt Chisel

005858433
B107.410: RNCC: 3 | RNVC: 1
1041: RNCC: 5 | RNVC: 1
B107.410 CAT 44 TY2: RNCC: 5 | RNVC: 1
GNK 1041: RNCC: 5 | RNVC: 2
101BC: RNCC: 5 | RNVC: 2
16-903: RNCC: 5 | RNVC: 2
16-903: RNCC: 5 | RNVC: 2
B107.44: RNCC: 5 | RNVC: 9
B107.44 TY2: RNCC: 5 | RNVC: 9
101BC: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-710-7328
Craftsman's Knife

017107328
48221962: RNCC: 3 | RNVC: 2

21 Jun 2023

5110-01-710-9745
Pocket Knife

017109745
1886: RNCC: 3 | RNVC: 2
1886: RNCC: 5 | RNVC: 2

12 Jul 2023

5110-01-699-6283
Enclosed Blade Tube Deburring Tool

016996283
YB-05312: RNCC: 3 | RNVC: 2
BA0531: RNCC: 5 | RNVC: 2
BA0531: RNCC: 5 | RNVC: 9

14 Feb 2022

5110-01-699-6361
Enclosed Blade Tube Deburring Tool

016996361
YB-05000: RNCC: 3 | RNVC: 2
BA0500: RNCC: 5 | RNVC: 2
BA0500: RNCC: 5 | RNVC: 9

15 Feb 2022

5110-00-234-6563
Hand File

002346563
A-A-2314: RNCC: 4 | RNVC: 1
A-A-2314 TY1: RNCC: 5 | RNVC: 1
06804N: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
06804: RNCC: 5 | RNVC: 9
06804: RNCC: 5 | RNVC: 9
GGG-F-325 TY11STA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-241-9165
Hand File

002419165
A-A-2322: RNCC: 4 | RNVC: 1
A-A-2322 TY2: RNCC: 5 | RNVC: 1
16180N: RNCC: 5 | RNVC: 2
16180: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
16180: RNCC: 5 | RNVC: 9
GGG-F-325 TY19STB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-234-6532
Hand File

002346532
A-A-2311: RNCC: 4 | RNVC: 1
A-A-2311 TY3: RNCC: 5 | RNVC: 1
GGG-F-325 TY7STC: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-234-6557
Hand File

002346557
A-A-2318: RNCC: 4 | RNVC: 1
16011: RNCC: 5 | RNVC: 2
3494206: RNCC: 5 | RNVC: 2
300AG1121: RNCC: 5 | RNVC: 2
GGG-F-325 TY16CL1STA: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
3494206: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-779-2856
Hand Wire Stripper

007792856
45-090: RNCC: 3 | RNVC: 2
L-5620: RNCC: 5 | RNVC: 2

1 Jan 1960

5110-00-186-4215
Hand Reamer

001864215
A-A-2936: RNCC: 4 | RNVC: 1
A-A-2936 TY1: RNCC: 5 | RNVC: 1
34945: RNCC: 5 | RNVC: 2
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY7CL1GRB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-430-5043
Pocket Folding Multi-Tool

014305043
5110-01-430-5043: RNCC: 3 | RNVC: 1
63020101: RNCC: 5 | RNVC: 9
SUPER TOOL/BLACK/LEATHER: RNCC: 5 | RNVC: 9

30 Apr 1996

5110-01-054-7989
Wire Stripper Blade

010547989
AS5768: RNCC: 3 | RNVC: 1
L-5561: RNCC: 3 | RNVC: 2
AWS107: RNCC: 3 | RNVC: 2
AS5768/1-B7: RNCC: 5 | RNVC: 1
VG95236T16AA011: RNCC: 5 | RNVC: 2

27 Jan 1978

5110-00-221-1075
Blacksmith's Chisel

002211075
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL6: RNCC: 5 | RNVC: 1
1362580: RNCC: 5 | RNVC: 2
45621: RNCC: 5 | RNVC: 2
G10-1075: RNCC: 5 | RNVC: 9
GGG-T-00563: RNCC: 5 | RNVC: 9
MS16882-2: RNCC: 5 | RNVC: 9
B107.48: RNCC: 5 | RNVC: 9
1362580: RNCC: 5 | RNVC: 9
B107.48 TY1CL6: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-594-4997
Knife Blade

015944997
017-000246R00: RNCC: 3 | RNVC: 2
35435A83: RNCC: 5 | RNVC: 2

25 Apr 2011

5110-01-604-4860
Thread Restorer File

016044860
TF1127B: RNCC: 3 | RNVC: 1
ZLW0290-2: RNCC: 5 | RNVC: 2
ZHVY0335-2: RNCC: 5 | RNVC: 2
FRS TF1127B: RNCC: 5 | RNVC: 9

6 Apr 2012

5110-01-710-6207
Pocket Folding Multi-Tool

017106207
84-519K: RNCC: 3 | RNVC: 2

12 Jun 2023

5110-01-708-8183
Firmer Chisel

017088183
16-316: RNCC: 3 | RNVC: 2

25 Apr 2023

5110-00-273-0127
Hand Metal Cutting Shears

002730127
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 16 TY2CL2: RNCC: 5 | RNVC: 1
M2RS1: RNCC: 5 | RNVC: 1
0728 6403: RNCC: 5 | RNVC: 2
MS52: RNCC: 5 | RNVC: 2
KDR: RNCC: 5 | RNVC: 2
DAR10B: RNCC: 5 | RNVC: 2
14-564: RNCC: 5 | RNVC: 2
9R: RNCC: 5 | RNVC: 9
B107.16M TY2CL2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-2336
Single Bit Ax

002932336
6150925: RNCC: 3 | RNVC: 2
MOR3536L565: RNCC: 5 | RNVC: 2
40DV36C GSA-1: RNCC: 5 | RNVC: 2
MOR3536L565: RNCC: 5 | RNVC: 2
MA207-21880: RNCC: 5 | RNVC: 2
1362400: RNCC: 5 | RNVC: 2
10501970: RNCC: 5 | RNVC: 2
1362400: RNCC: 5 | RNVC: 9
40D1FG: RNCC: 5 | RNVC: 9
GGG-A-926 TY1CL1DEA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-14-298-5468
Hand Hacksaw Blade

142985468
E73-072-300X13X0-65X0-8S0UPLEHSS: RNCC: 2 | RNVC: 2
0188060: RNCC: 3 | RNVC: 2
3805-12: RNCC: 3 | RNVC: 2
ULTRAMAJ0R300-12: RNCC: 3 | RNVC: 9
4355-12: RNCC: 3 | RNVC: 9
E73-071-300X13X0-65X0-8S0UPLE: RNCC: 5 | RNVC: 2
600-12: RNCC: 5 | RNVC: 2
600.12: RNCC: 5 | RNVC: 2
352LI0N12: RNCC: 5 | RNVC: 2
352-12: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-01-699-5535
Enclosed Blade Tube Deburring Tool

016995535
YB-04688: RNCC: 3 | RNVC: 2
BA0468: RNCC: 5 | RNVC: 2
BA0468: RNCC: 5 | RNVC: 9

8 Feb 2022

5110-01-367-3831
Hand Wire Stripper-Crimper

013673831
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 37 TY2CL3: RNCC: 5 | RNVC: 1
PWC14: RNCC: 5 | RNVC: 2
ZHVY0021: RNCC: 5 | RNVC: 2
B107.37: RNCC: 5 | RNVC: 9
B107.37 TY2CL3: RNCC: 5 | RNVC: 9

10 Nov 1992

5110-14-218-4261
Hand File

142184261
E75001LE300B: RNCC: 2 | RNVC: 2
112-MID-300: RNCC: 3 | RNVC: 2
912-300DD: RNCC: 3 | RNVC: 2
0912300204: RNCC: 3 | RNVC: 2
TRI.MD300: RNCC: 3 | RNVC: 2
0912300201: RNCC: 3 | RNVC: 2
130218: RNCC: 5 | RNVC: 2
E75-001TRIANGULAIREDEMID0UCE300: RNCC: 5 | RNVC: 2
0714 61 22: RNCC: 5 | RNVC: 2
3148516048400: RNCC: 5 | RNVC: 2

1 Jan 1965

5110-01-563-9473
Hand File

015639473
21748H: RNCC: 3 | RNVC: 2
A-A-2311: RNCC: 4 | RNVC: 1
A-A-2311 TY1: RNCC: 5 | RNVC: 1
21748H: RNCC: 5 | RNVC: 9

30 May 2008

NSN 5110-01-385-7236 013857236 KNIFE,POCKET

5110-01-385-7236
Pocket Knife

013857236
22-06009: RNCC: 3 | RNVC: 2
06009: RNCC: 5 | RNVC: 9
LST BLACK DROP: RNCC: 5 | RNVC: 9

18 Jan 1994

5110-01-300-2465
Hand File

013002465
5NFB: RNCC: 3 | RNVC: 2
T37472: RNCC: 3 | RNVC: 2
NF-F-5#0: RNCC: 3 | RNVC: 2
60303922: RNCC: 5 | RNVC: 2
60303922: RNCC: 5 | RNVC: 2
5NF: RNCC: 5 | RNVC: 9
37472: RNCC: 5 | RNVC: 9
37472: RNCC: 5 | RNVC: 9
5NFA: RNCC: 5 | RNVC: 9

12 May 1989

5110-01-589-7951
Brick Chisel

015897951
B107.410: RNCC: 3 | RNVC: 1
35105: RNCC: 3 | RNVC: 2
B107.410 CAT 50 TY1: RNCC: 5 | RNVC: 1
MAY 35105: RNCC: 5 | RNVC: 2

4 Nov 2010

5110-01-300-2459
Hand File

013002459
5NB: RNCC: 3 | RNVC: 2
37640: RNCC: 3 | RNVC: 2
5NBB: RNCC: 3 | RNVC: 2
NF-B-5#0: RNCC: 3 | RNVC: 2
37640: RNCC: 5 | RNVC: 9

12 May 1989

5110-00-260-1719
Hand Reamer

002601719
B94.2: RNCC: 3 | RNVC: 1
USA28519: RNCC: 3 | RNVC: 2
712-046614: RNCC: 5 | RNVC: 9
C24557: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
101-0-0.8125: RNCC: 5 | RNVC: 9
A-A-2928: RNCC: 5 | RNVC: 9
103HS 13/16 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-803-6339
Nut Splitting Tool

008036339
NC52: RNCC: 3 | RNVC: 2
715: RNCC: 3 | RNVC: 2
PU-NC12: RNCC: 5 | RNVC: 2
499: RNCC: 5 | RNVC: 2
ZHVY0348: RNCC: 5 | RNVC: 2
ZLW0027: RNCC: 5 | RNVC: 2
715: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-12-120-5648
Hand File

121205648
TL5110-0036-530: RNCC: 2 | RNVC: 2
1152-250-2: RNCC: 3 | RNVC: 2
DIN7261-E250-2: RNCC: 5 | RNVC: 1
01.76.94.40: RNCC: 5 | RNVC: 2
TK5110-219-530: RNCC: 5 | RNVC: 2
1156-250-2: RNCC: 5 | RNVC: 9
1-210-10-2-3: RNCC: 5 | RNVC: 9
08-087-0: RNCC: 5 | RNVC: 9
B250X2DIN8334: RNCC: 5 | RNVC: 9
DIN7261E250-2: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-126-1291
Hand File

121261291
TL5110-0036-360: RNCC: 2 | RNVC: 2
1142-150-2: RNCC: 3 | RNVC: 2
DIN7261-D150-2: RNCC: 5 | RNVC: 1
TK5110-219-360: RNCC: 5 | RNVC: 2
1146-150-2: RNCC: 5 | RNVC: 9
1146P-150-2: RNCC: 5 | RNVC: 9
1393715128127129: RNCC: 5 | RNVC: 9
0808396392899: RNCC: 5 | RNVC: 9
TGL 48-74113,150X6,2: RNCC: 5 | RNVC: 9
C150X2DIN8337: RNCC: 5 | RNVC: 9

30 May 1969

5110-01-708-5987
Pocket Knife

017085987
535CU66: RNCC: 3 | RNVC: 2

12 Apr 2023

5110-01-708-6580
Pocket Knife

017086580
273GY-1: RNCC: 3 | RNVC: 2

14 Apr 2023

5110-01-708-6573
Pocket Knife

017086573
CS-62L: RNCC: 3 | RNVC: 2

14 Apr 2023

5110-12-320-6617
Hand Operated Cable Cutter

123206617
TL5110-0039-002: RNCC: 2 | RNVC: 2
SH320: RNCC: 3 | RNVC: 2
9531250: RNCC: 3 | RNVC: 2
2804: RNCC: 3 | RNVC: 2
00.19.13.70: RNCC: 5 | RNVC: 2
012125000: RNCC: 5 | RNVC: 2
4003773043935: RNCC: 5 | RNVC: 2
731100-32: RNCC: 5 | RNVC: 2
012120013: RNCC: 5 | RNVC: 9
SH300: RNCC: 5 | RNVC: 9

5 Feb 1990

5110-12-126-1286
Hand File

121261286
DIN7261-F300-3: RNCC: 2 | RNVC: 2
514300-300: RNCC: 3 | RNVC: 2
3162303: RNCC: 3 | RNVC: 2
1162-300-3: RNCC: 3 | RNVC: 2
51430-300: RNCC: 5 | RNVC: 2
F300-3DIN7261: RNCC: 5 | RNVC: 2
1162-300-3: RNCC: 5 | RNVC: 2
0808396028739: RNCC: 5 | RNVC: 9
TGL 48-74114,300X12,3: RNCC: 5 | RNVC: 9
1393716112266137: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-137-5702
Hand File

121375702
TL5110-0036-330: RNCC: 2 | RNVC: 2
1142-100-2: RNCC: 3 | RNVC: 2
DIN7261-D100-2: RNCC: 5 | RNVC: 1
TK5110-219-330: RNCC: 5 | RNVC: 2
1146-100-2: RNCC: 5 | RNVC: 9
3142102: RNCC: 5 | RNVC: 9
51220-100: RNCC: 5 | RNVC: 9
C100X2DIN8337: RNCC: 5 | RNVC: 9
D100-2DIN7261: RNCC: 5 | RNVC: 9
DIN7261D100-2: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-237-9531
Hand Hacksaw Blade

142379531
E73-072-300X13X0-65X1-4: RNCC: 2 | RNVC: 1
3801-8: RNCC: 3 | RNVC: 2
ULTRASUPERRAPIDE300-8: RNCC: 3 | RNVC: 9
E73-071-300X13X0-65-1-4: RNCC: 5 | RNVC: 2
0192000: RNCC: 5 | RNVC: 2
666-8: RNCC: 5 | RNVC: 2
666.8: RNCC: 5 | RNVC: 2
176-1582: RNCC: 5 | RNVC: 2
355R8: RNCC: 5 | RNVC: 9
DEMULTRASUPERRAPIDE300-8: RNCC: 5 | RNVC: 9

1 Jan 1967

5110-01-701-8943
Hand Reamer

017018943
TD525C1-83: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-8977
Hand Reamer

017018977
TD525C1-62: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-8949
Hand Reamer

017018949
TD525C1-91: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-8968
Hand Reamer

017018968
TD525C1-55: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-8971
Hand Reamer

017018971
TD525C1-75: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-698-8336
Hand Cable Stripper

016988336
FSPP-105-00-001: RNCC: 3 | RNVC: 2

14 Dec 2021

5110-14-271-6140
Hand File

142716140
E75001LA100B: RNCC: 2 | RNVC: 2
900-100DD: RNCC: 3 | RNVC: 2
0900100201: RNCC: 3 | RNVC: 2
0900100204: RNCC: 3 | RNVC: 2
101-MID-100: RNCC: 3 | RNVC: 2
PAM.MD100: RNCC: 3 | RNVC: 2
3148516004208: RNCC: 5 | RNVC: 2
PAMMD100: RNCC: 5 | RNVC: 2
PAM.MD 100: RNCC: 5 | RNVC: 2
0600420: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-14-200-8114
Hand File

142008114
E75001LA200B: RNCC: 2 | RNVC: 2
900-200DD: RNCC: 3 | RNVC: 2
PAM.MD200: RNCC: 3 | RNVC: 2
0714 61 06: RNCC: 5 | RNVC: 2
863440: RNCC: 5 | RNVC: 2
101840: RNCC: 5 | RNVC: 2
E75-001PLATEAMAINDEMID0UCE200: RNCC: 5 | RNVC: 2
3148516004802: RNCC: 5 | RNVC: 2
PAMMD200: RNCC: 5 | RNVC: 2
101DEMID0UCE200: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-01-708-8292
Hand Cable Stripper

017088292
11230002: RNCC: 3 | RNVC: 1

26 Apr 2023

5110-01-710-6466
Rigid Handle Machete

017106466
5302006: RNCC: 3 | RNVC: 2

13 Jun 2023

5110-01-708-7172
Cable Stripper Blade

017087172
45-2814-1: RNCC: 3 | RNVC: 2
45-2814-1: RNCC: 5 | RNVC: 2

18 Apr 2023

5110-01-708-8167
Firmer Chisel

017088167
16-308: RNCC: 3 | RNVC: 2

25 Apr 2023

5110-14-210-5445
Hand File

142105445
E75001LC150C: RNCC: 2 | RNVC: 2
DRD.D150: RNCC: 3 | RNVC: 2
0910150301: RNCC: 3 | RNVC: 2
910-150D: RNCC: 3 | RNVC: 2
3148516024008: RNCC: 5 | RNVC: 2
DRDD150: RNCC: 5 | RNVC: 2
MD15: RNCC: 5 | RNVC: 2
SYQ0908: RNCC: 5 | RNVC: 2
0714 61 41: RNCC: 5 | RNVC: 2
0602400: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-14-210-5447
Hand File

142105447
E75001LF150C: RNCC: 2 | RNVC: 2
RD.D150: RNCC: 3 | RNVC: 2
0914150301: RNCC: 3 | RNVC: 2
914-150D: RNCC: 3 | RNVC: 2
0914150304: RNCC: 3 | RNVC: 2
110-DX-150: RNCC: 3 | RNVC: 2
RD15: RNCC: 5 | RNVC: 2
SYQ0913: RNCC: 5 | RNVC: 2
3148516042705: RNCC: 5 | RNVC: 2
RDD150: RNCC: 5 | RNVC: 2

1 Jan 1964

5110-14-204-8344
Hand File

142048344
E75001LC200B: RNCC: 2 | RNVC: 2
DRD.MD200EM: RNCC: 3 | RNVC: 2
0910200201: RNCC: 3 | RNVC: 2
910-200DD: RNCC: 3 | RNVC: 2
102009: RNCC: 5 | RNVC: 2
3148516509703: RNCC: 5 | RNVC: 2
DRD MD 200 EM: RNCC: 5 | RNVC: 2
DRDMD200EM: RNCC: 5 | RNVC: 2
0650970: RNCC: 5 | RNVC: 9
DRD.M200EM: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-7586
Hand File

002397586
31.633: RNCC: 3 | RNVC: 2
5NTSC: RNCC: 3 | RNVC: 2
5NTSB: RNCC: 3 | RNVC: 2
NF-TSQ-5#0: RNCC: 3 | RNVC: 2
A-A-2444: RNCC: 4 | RNVC: 1
37584: RNCC: 5 | RNVC: 2
60236908: RNCC: 5 | RNVC: 2
5NTS: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL3: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-642-0385
Hand Operated Cable Cutter

016420385
AS6173-1: RNCC: 3 | RNVC: 1
AS6173: RNCC: 3 | RNVC: 1
AS6173/1-01: RNCC: 5 | RNVC: 1
AS6173/1 TY1: RNCC: 5 | RNVC: 1
AS6173-1: RNCC: 5 | RNVC: 9

10 Feb 2015

5110-01-701-8972
Hand Reamer

017018972
TD525C1-76: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-9374
Hand Reamer

017019374
TD525C1-79: RNCC: 3 | RNVC: 2

17 Jun 2022

5110-01-701-9375
Hand Reamer

017019375
TD525C1-81: RNCC: 3 | RNVC: 2

17 Jun 2022

5110-01-701-8978
Hand Reamer

017018978
TD525C1-64: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-8965
Hand Reamer

017018965
TD525C1-72: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-8966
Hand Reamer

017018966
TD525C1-54: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-700-7643
Hand Operated Cable Cutter

017007643
45207I: RNCC: 3 | RNVC: 2
1209500081: RNCC: 7 | RNVC: 2

12 Apr 2022

5110-01-705-3131
Scraper Blade

017053131
28-170: RNCC: 3 | RNVC: 2

13 Sep 2022

5110-01-702-3815
Hand File

017023815
SGF8MA: RNCC: 3 | RNVC: 2

1 Jul 2022

5110-01-654-7923
Single Bit Ax

016547923
B107.400: RNCC: 3 | RNVC: 1
B107.400 CAT 42 TY2CL2: RNCC: 5 | RNVC: 1
6GDP6: RNCC: 5 | RNVC: 2
B107.42 TY2: RNCC: 5 | RNVC: 9
B107.42: RNCC: 5 | RNVC: 9

9 May 2016

5110-01-691-2588
Hand Wire Stripper

016912588
FMHT0-96230: RNCC: 3 | RNVC: 2
STANLEY96230: RNCC: 5 | RNVC: 2
STANLEY96230: RNCC: 5 | RNVC: 2
IN230: RNCC: 5 | RNVC: 2

30 Sep 2020

5110-01-701-9370
Hand Reamer

017019370
TD525C1-77: RNCC: 3 | RNVC: 2

17 Jun 2022

5110-01-701-8957
Hand Reamer

017018957
TD525C1-50: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-8936
Hand Reamer

017018936
TD525C1-103: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-8939
Hand Reamer

017018939
TD525C1-105: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-8942
Hand Reamer

017018942
TD525C1-94: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-8963
Hand Reamer

017018963
TD525C1-71: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-8970
Hand Reamer

017018970
TD525C1-56: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-00-357-6862
Hand Reamer Set

003576862
B94.2: RNCC: 3 | RNVC: 1
41R2315: RNCC: 5 | RNVC: 2
A-A-2930: RNCC: 5 | RNVC: 9
A-A-2930 TY1: RNCC: 5 | RNVC: 9
09080: RNCC: 5 | RNVC: 9
155-S-01: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL1GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-707-1811
Hand Operated Cable Cutter

017071811
J288: RNCC: 3 | RNVC: 2

20 Jan 2023

5110-01-706-8224
Pocket Folding Multi-Tool

017068224
FREE T2: RNCC: 3 | RNVC: 2

21 Dec 2022

5110-01-137-8425
Bolt Cutter

011378425
0590MC: RNCC: 3 | RNVC: 2
A-A-3047: RNCC: 4 | RNVC: 1
A-A-3047 CL2: RNCC: 5 | RNVC: 1
0590MC: RNCC: 5 | RNVC: 9

4 Sep 1982

NSN 5110-00-596-7164 005967164 PLIERS,DIAGONAL CUTTING

5110-00-596-7164
Diagonal Cutting Pliers

005967164
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 11 TY1CL1: RNCC: 5 | RNVC: 1
B18201180: RNCC: 5 | RNVC: 2
A-A-2330: RNCC: 5 | RNVC: 9
B107.11 TY3STA: RNCC: 5 | RNVC: 9
GGG-P-468: RNCC: 5 | RNVC: 9
GGG-P-468 TY3STA: RNCC: 5 | RNVC: 9
B107.11: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-700-3384
Scraper Blade

017003384
1700142287: RNCC: 3 | RNVC: 2

23 Mar 2022

5110-01-650-6009
Hand Optical Fiber Cleaving Tool

016506009
DS-90-W: RNCC: 3 | RNVC: 2
1N180120058: RNCC: 5 | RNVC: 2

11 Dec 2015

5110-01-648-6102
Hand Hacksaw Blade

016486102
B94.52M: RNCC: 3 | RNVC: 1
1224UL: RNCC: 3 | RNVC: 2

29 Sep 2015

5110-01-701-8959
Hand Reamer

017018959
TD525C1-68: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-01-701-8964
Hand Reamer

017018964
TD525C1-70: RNCC: 3 | RNVC: 2

14 Jun 2022

5110-21-105-0102
Compressed Gas Cylinder

5110-00-249-2849
Hand File

002492849
A-A-2311: RNCC: 4 | RNVC: 1
A-A-2311 TY1: RNCC: 5 | RNVC: 1
73234000: RNCC: 5 | RNVC: 2
03665: RNCC: 5 | RNVC: 2
GGG-F-325 TY7STA: RNCC: 5 | RNVC: 9
73-23400: RNCC: 5 | RNVC: 9
03665: RNCC: 5 | RNVC: 9
73-23400 SIMONDS: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-234-1944
Hand Cold Chisel

002341944
B107.410: RNCC: 3 | RNVC: 1
10220: RNCC: 5 | RNVC: 1
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1
MAY 10220: RNCC: 5 | RNVC: 2
G10-1944: RNCC: 5 | RNVC: 2
11109: RNCC: 5 | RNVC: 2
32508: RNCC: 5 | RNVC: 2
GGG-C-313: RNCC: 5 | RNVC: 9
B107.48: RNCC: 5 | RNVC: 9
B107.48 TY1CL2: RNCC: 5 | RNVC: 9

1 Jan 1963

NSN 5110-01-372-5754 013725754 STRIPPER,WIRE,HAND

5110-01-372-5754
Hand Wire Stripper

013725754
B107.500: RNCC: 3 | RNVC: 1
1004: RNCC: 3 | RNVC: 2
B107.500 CAT 37 TY2CL4: RNCC: 5 | RNVC: 1
1004 KLEIN: RNCC: 5 | RNVC: 2

12 Mar 1993

5110-21-105-2201
Bumper

5110-00-252-4015
Hand File

002524015
12HR: RNCC: 3 | RNVC: 2
05090N: RNCC: 3 | RNVC: 2
A-A-2312: RNCC: 4 | RNVC: 1
A-A-2312 TY1: RNCC: 5 | RNVC: 1
05094: RNCC: 5 | RNVC: 2
13041: RNCC: 5 | RNVC: 2
73-32300: RNCC: 5 | RNVC: 2
GGG-F-325 TY9STA: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
05094: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-645-0075
Hand Metal Stamping Die Set

016450075
21627: RNCC: 3 | RNVC: 2
B077SZ22FX: RNCC: 5 | RNVC: 9

31 May 2015

5110-01-711-0138
Knife Blade

017110138
95-0096: RNCC: 3 | RNVC: 2

14 Jul 2023

5110-00-293-0089
Hand Metal Cutting Shears

002930089
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 16 TY1CL1STA: RNCC: 5 | RNVC: 1
270: RNCC: 5 | RNVC: 2
012: RNCC: 5 | RNVC: 2
GGG-S-291: RNCC: 5 | RNVC: 9
B107.16: RNCC: 5 | RNVC: 9
B107.16M: RNCC: 5 | RNVC: 9
B107.16 TY1CL1STB: RNCC: 5 | RNVC: 9
B107.16M TY1CL1STB: RNCC: 5 | RNVC: 9
THFX1: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-675-3837

7 Sep 2018

5110-01-672-4308
Hand Metal Cutting Shears

016724308
J2100L: RNCC: 3 | RNVC: 2
2100L: RNCC: 5 | RNVC: 9

1 May 2018

5110-01-671-7489
No Item Name Available

9 Apr 2018

5110-01-671-7486
No Item Name Available

9 Apr 2018

5110-01-656-1701
Hand File

016561701
5NTSB: RNCC: 3 | RNVC: 2

20 Jun 2016

5110-01-656-1529
Miniature Pick Set

016561529
YA149A: RNCC: 3 | RNVC: 2

20 Jun 2016

5110-01-655-6303
Hand File

016556303
5NFA: RNCC: 3 | RNVC: 2

3 Jun 2016

5110-01-655-6305
Hand File

016556305
5NRA: RNCC: 3 | RNVC: 2

3 Jun 2016

5110-01-652-0481
Bolt Cutter

016520481
0190AC: RNCC: 3 | RNVC: 1

8 Feb 2016

5110-01-651-9010
Diagonal Cutting Pliers

016519010
85ACF: RNCC: 3 | RNVC: 2

3 Feb 2016

5110-01-649-8915
Hand Metal Cutting Shears

016498915
CD12A: RNCC: 3 | RNVC: 1
ZHVY0325: RNCC: 5 | RNVC: 2
ZLW0270: RNCC: 5 | RNVC: 2

13 Nov 2015

5110-01-649-7783
Craftsman's Knife

016497783
M-28: RNCC: 3 | RNVC: 1
ZHVY0397-6: RNCC: 5 | RNVC: 2
ZLW0303-6: RNCC: 5 | RNVC: 2

9 Nov 2015

5110-01-649-7714
Tube Cutter

016497714
TC28C: RNCC: 3 | RNVC: 2
ZHVY0334-9: RNCC: 5 | RNVC: 2
ZLW0289-9: RNCC: 5 | RNVC: 2
TC28A: RNCC: 5 | RNVC: 9

9 Nov 2015

5110-01-649-7662
Hand Cold Chisel

016497662
PPC824B: RNCC: 3 | RNVC: 1
ZHVY0068: RNCC: 5 | RNVC: 2
ZLW0085: RNCC: 5 | RNVC: 2

9 Nov 2015

5110-01-649-6699
Hand Cold Chisel

016496699
PPC816B: RNCC: 3 | RNVC: 2
ZHVY0064: RNCC: 5 | RNVC: 2
ZLW0081: RNCC: 5 | RNVC: 2

5 Nov 2015

5110-01-649-6552
Diagonal Cutting Pliers

016496552
87ACF: RNCC: 3 | RNVC: 2
ZHVY0320: RNCC: 5 | RNVC: 2
ZLW0266: RNCC: 5 | RNVC: 2
87CF: RNCC: 5 | RNVC: 9

5 Nov 2015

5110-01-649-6570
Hand Wire Stripper-Crimper

016496570
PWC14: RNCC: 3 | RNVC: 2
ZHVY0021: RNCC: 5 | RNVC: 2

5 Nov 2015

5110-01-649-6568
Nut Splitting Tool

016496568
NC52: RNCC: 3 | RNVC: 2
ZLW0027: RNCC: 5 | RNVC: 2
ZHVY0348: RNCC: 5 | RNVC: 2

5 Nov 2015

5110-01-649-6563
File Handle

016496563
GA98A: RNCC: 3 | RNVC: 1
ZHVY0071: RNCC: 5 | RNVC: 2
ZLW0088: RNCC: 5 | RNVC: 2

5 Nov 2015

5110-01-649-6562
Hand Wire Stripper-Crimper

016496562
PWC28A: RNCC: 3 | RNVC: 1
ZHVY0390-21: RNCC: 5 | RNVC: 2
ZLW0358-21: RNCC: 5 | RNVC: 2

5 Nov 2015

5110-01-649-6559
Thread Restorer File

016496559
TF1127B: RNCC: 3 | RNVC: 1
ZLW0290-2: RNCC: 5 | RNVC: 2
ZHVY0335-2: RNCC: 5 | RNVC: 2

5 Nov 2015

5110-01-649-6561
Thread Restorer File Set

016496561
TFTFM932A: RNCC: 3 | RNVC: 1
ZHVY0335: RNCC: 5 | RNVC: 2
ZLW0290: RNCC: 5 | RNVC: 2

5 Nov 2015

5110-01-649-6549
Thread Restorer File

016496549
TFM7530B: RNCC: 3 | RNVC: 1
11A7000169-2: RNCC: 5 | RNVC: 2
ZHVY0335-3: RNCC: 5 | RNVC: 2
ZLW0290-3: RNCC: 5 | RNVC: 2

5 Nov 2015

5110-01-649-6555
Thread Restorer File

016496555
TF1124B: RNCC: 3 | RNVC: 1
ZHVY0335-1: RNCC: 5 | RNVC: 2
ZLW0290-1: RNCC: 5 | RNVC: 2
11A7000169-1: RNCC: 5 | RNVC: 2

5 Nov 2015

5110-01-649-6544
Metal Cutting Hand Saw

016496544
701-S: RNCC: 3 | RNVC: 1
ZHVY0045: RNCC: 5 | RNVC: 2
ZLW0009: RNCC: 5 | RNVC: 2

5 Nov 2015

5110-01-648-8494
Hand File

016488494
05090N: RNCC: 3 | RNVC: 2

8 Oct 2015

5110-01-648-8489
Hand Cold Chisel

016488489
J86A1X8S2: RNCC: 3 | RNVC: 2

8 Oct 2015

5110-01-648-7927
Hand Cold Chisel

016487927
J86A7/16S2: RNCC: 3 | RNVC: 2

6 Oct 2015

5110-01-644-5248
Hand File

10 May 2015

5110-01-643-5580
Hand File

016435580
A-A-2320: RNCC: 4 | RNVC: 1
12F794: RNCC: 5 | RNVC: 2
16841: RNCC: 5 | RNVC: 2

6 Apr 2015

5110-01-643-3226
Hand Cold Chisel

29 Mar 2015

5110-01-641-5754
Diagonal Cutting Pliers

27 Jan 2015

5110-01-633-7019
Bolt Cutter

016337019
BCNC-001: RNCC: 3 | RNVC: 2

1 Dec 2014

5110-01-633-4755
Diagonal Cutting Pliers

016334755
84CF: RNCC: 3 | RNVC: 2

24 Nov 2014

5110-01-633-0056
Craftsman's Knife

016330056
7 SAFETY CUTTER: RNCC: 3 | RNVC: 2
CPS-MISC-7BLKW: RNCC: 3 | RNVC: 2

5 Nov 2014

5110-01-631-8648
Hand Hacksaw Blade

016318648
DW3975-10: RNCC: 3 | RNVC: 2

29 Sep 2014

5110-01-631-7386
Hand File Set

016317386
22040NN: RNCC: 3 | RNVC: 2

24 Sep 2014

5110-01-630-4514
Knife Blade

016304514
XNB101: RNCC: 3 | RNVC: 2
440966: RNCC: 5 | RNVC: 2

5 Aug 2014

5110-01-621-6647
Knife Blade

016216647
5110-00-NIB-0057: RNCC: 3 | RNVC: 2

15 Sep 2013

5110-01-621-0771
Pliers

22 Aug 2013

NSN 5110-01-621-0820 016210820 PLIERS,DIAGONAL CUTTING

5110-01-621-0820
Diagonal Cutting Pliers

22 Aug 2013

5110-01-621-0781
Pliers

016210781
J267G: RNCC: 3 | RNVC: 2

22 Aug 2013

NSN 5110-01-621-0769 016210769 PLIERS,SLIP JOINT

5110-01-621-0769
Slip Joint Pliers

22 Aug 2013

5110-01-621-0654
Pliers

21 Aug 2013

5110-01-621-0643
Diagonal Cutting Pliers

016210643
J204SG: RNCC: 3 | RNVC: 2

21 Aug 2013

5110-01-617-7458
Hand File

016177458
15060: RNCC: 3 | RNVC: 2

2 Apr 2013

5110-01-616-9903
Hand Cable Stripper

6 Mar 2013

5110-01-615-7055
Comba Folding Knife

016157055
USFORA 5110-01-436-1548: RNCC: 3 | RNVC: 2

21 Jan 2013

5110-01-614-3737
Hand Wire Stripper

016143737
11046: RNCC: 3 | RNVC: 2

3 Dec 2012

NSN 5110-01-609-0415 016090415 PLIERS,DIAGONAL CUTTING

5110-01-609-0415
Diagonal Cutting Pliers

13 Jul 2012

5110-01-608-4041
Pliers

016084041
830072: RNCC: 3 | RNVC: 2

26 Jun 2012

5110-01-604-5836
Metal Cutting Hand Saw

016045836
HSG325: RNCC: 3 | RNVC: 2

9 Apr 2012

5110-01-604-4889
Craftsman's Knife

016044889
FRS WK5V: RNCC: 3 | RNVC: 2

6 Apr 2012

5110-01-604-4753
Tube Fitting Male Flare Seat Refacing Tool

016044753
FRS 345FA: RNCC: 3 | RNVC: 2

6 Apr 2012

5110-01-604-3739
Hand Hacksaw Blade

016043739
FRS HSBM1224B: RNCC: 3 | RNVC: 2

3 Apr 2012

5110-01-600-3249
Hand Reamer

016003249
FTSR-797-3-2-2-C: RNCC: 3 | RNVC: 2

23 Nov 2011

5110-01-599-8080
Tube Cutter

015998080
44197: RNCC: 3 | RNVC: 2
152S: RNCC: 5 | RNVC: 2

24 Oct 2011

5110-01-597-1754
Pocket Folding Multi-Tool

015971754
5110-01-456-0578: RNCC: 3 | RNVC: 2

1 Jun 2011

5110-01-597-1752
Pocket Folding Multi-Tool

015971752
5110-01-541-1455: RNCC: 3 | RNVC: 2

1 Jun 2011

5110-01-597-1742
Pocket Folding Multi-Tool

015971742
5110-01-462-3400: RNCC: 3 | RNVC: 2

1 Jun 2011

5110-01-595-9295
Craftsman's Knife Set

015959295
X75310: RNCC: 3 | RNVC: 9

8 May 2011

5110-01-593-4272
Wire Stripper Blade Set

015934272
45-1987-1: RNCC: 3 | RNVC: 2

7 Apr 2011

NSN 5110-01-590-8696 015908696 KNIFE,POCKET

5110-01-590-8696
Pocket Knife

29 Dec 2010

5110-01-590-1773
Hammer Chisel Attachment

015901773
SSL 213531: RNCC: 3 | RNVC: 2

22 Nov 2010

5110-01-590-1194
Wallboard Saw

015901194
DW814: RNCC: 3 | RNVC: 2
09020: RNCC: 5 | RNVC: 9
HYD 09020: RNCC: 5 | RNVC: 9

18 Nov 2010

5110-01-590-1175
Woodworking Butt Chisel

015901175
GNK 1041: RNCC: 3 | RNVC: 2

18 Nov 2010

5110-01-590-1187
Hand File Set

015901187
GEN 890: RNCC: 3 | RNVC: 2

18 Nov 2010

5110-01-590-1182
Woodworking Butt Chisel

015901182
GNK 1047: RNCC: 3 | RNVC: 2

18 Nov 2010

5110-01-590-1181
Woodworking Butt Chisel

015901181
GNK 1045: RNCC: 3 | RNVC: 2

18 Nov 2010

5110-01-590-1177
Woodworking Butt Chisel Set

015901177
SET WCS6: RNCC: 3 | RNVC: 2

18 Nov 2010

5110-01-590-1185
Hand Rasp

015901185
NIC 19427N: RNCC: 3 | RNVC: 2

18 Nov 2010

5110-01-590-1183
Hand Rasp

18 Nov 2010

5110-01-590-1170
Hand File

015901170
SIM 73-53050: RNCC: 3 | RNVC: 2

18 Nov 2010

5110-01-590-1180
Woodworking Butt Chisel

015901180
GNK 1043: RNCC: 3 | RNVC: 2

18 Nov 2010

5110-01-590-1168
Hand File

015901168
73147500: RNCC: 3 | RNVC: 2
SIM 73-14750: RNCC: 5 | RNVC: 9

18 Nov 2010

5110-01-590-1171
File Cleaning Brush

015901171
SIM 73-99350: RNCC: 3 | RNVC: 2

18 Nov 2010

5110-01-590-1172
Woodworking Butt Chisel

015901172
GNK 1048: RNCC: 3 | RNVC: 2

18 Nov 2010

5110-01-590-1169
Hand File

015901169
SIM 73-51850: RNCC: 3 | RNVC: 2

18 Nov 2010

5110-01-590-1166
Hand File

015901166
SIM 73-40050: RNCC: 3 | RNVC: 2

18 Nov 2010

5110-01-590-1167
Hand File

015901167
SIM 73-32100: RNCC: 3 | RNVC: 2

18 Nov 2010

5110-01-589-9040
Hand Reamer

015899040
MOR 23508: RNCC: 3 | RNVC: 2

7 Nov 2010

5110-01-589-9049
Hand Metal Cutting Shears

015899049
WIS M3R: RNCC: 3 | RNVC: 2

7 Nov 2010

5110-01-589-8961
Craftsman's Knife

015898961
STP 18500: RNCC: 3 | RNVC: 2

7 Nov 2010

5110-01-589-8816
Hand File

015898816
NIC 11936: RNCC: 3 | RNVC: 2

7 Nov 2010

5110-01-589-8870
Metal Cutting Hand Saw

015898870
STP 15-804A: RNCC: 3 | RNVC: 2

7 Nov 2010

5110-01-589-8863
Metal Cutting Hand Saw

015898863
STP 15-265: RNCC: 3 | RNVC: 2

7 Nov 2010

5110-01-589-8809
Hand File

015898809
NIC 05886: RNCC: 3 | RNVC: 2

7 Nov 2010

5110-01-589-8806
Hand Cold Chisel

015898806
STP 86A3/16: RNCC: 3 | RNVC: 2

7 Nov 2010

5110-01-589-8840
File Handle

015898840
SIM 73-99210: RNCC: 3 | RNVC: 2

7 Nov 2010

5110-01-589-8812
Hand File

015898812
NIC 06836: RNCC: 3 | RNVC: 2

7 Nov 2010

5110-01-589-8805
Hand File

015898805
NIC 04927N: RNCC: 3 | RNVC: 2

7 Nov 2010

5110-01-589-8807
Hand Cold Chisel

015898807
STP 86A7/16: RNCC: 3 | RNVC: 2

7 Nov 2010

5110-01-589-7978
Knife Blade

015897978
WIS RWK16V: RNCC: 3 | RNVC: 2

4 Nov 2010

5110-01-589-7930
Hand File Set

015897930
HVA 505698194: RNCC: 3 | RNVC: 2

4 Nov 2010

5110-01-588-2133
Tube Cutter

015882133
23493: RNCC: 3 | RNVC: 2
1702865: RNCC: 5 | RNVC: 2

8 Sep 2010

5110-01-588-1525
Pipe Saw

015881525
RID 50522: RNCC: 3 | RNVC: 2

2 Sep 2010

5110-01-588-1529
Exposed Blade Tube Deburring Tool

015881529
RID 64962: RNCC: 3 | RNVC: 2

2 Sep 2010

5110-01-588-1498
Tube Cutter

015881498
RID 32975: RNCC: 3 | RNVC: 2

2 Sep 2010

5110-01-588-1515
Hand Reamer

015881515
RID 34965: RNCC: 3 | RNVC: 2

2 Sep 2010

5110-01-588-1489
Pipe Cutter Cutting Wheel

015881489
RID 33100: RNCC: 3 | RNVC: 2

2 Sep 2010

5110-01-588-1513
Hand Reamer

015881513
RID 34945: RNCC: 3 | RNVC: 2

2 Sep 2010

5110-01-588-1502
Axe

015881502
NUP 6881082: RNCC: 3 | RNVC: 2

2 Sep 2010

5110-01-588-1501
Pipe Cutter

015881501
VIR 211463: RNCC: 3 | RNVC: 2

2 Sep 2010

5110-01-588-1497
Tube Cutter

015881497
RID 34572: RNCC: 3 | RNVC: 2

2 Sep 2010

5110-01-588-1492
Tube Cutter

015881492
RID 31627: RNCC: 3 | RNVC: 2

2 Sep 2010

5110-01-588-1499
Pipe Cutter

015881499
RID 32820: RNCC: 3 | RNVC: 2

2 Sep 2010

5110-01-588-0550
Drum Deheader

015880550
CAM 6410702: RNCC: 3 | RNVC: 2

30 Aug 2010

5110-01-588-0548
Half Hatchet

015880548
EST E3-2H: RNCC: 3 | RNVC: 2

30 Aug 2010

5110-01-588-0549
Hand Operated Wire Rope Cutter

015880549
HKP 0690TN: RNCC: 3 | RNVC: 2

30 Aug 2010

5110-01-588-0521
Bow Saw Blade

015880521
SEY WP-9601: RNCC: 3 | RNVC: 2

30 Aug 2010

5110-01-588-0536
Axe

015880536
NUP 6881081: RNCC: 3 | RNVC: 2

30 Aug 2010

5110-01-588-0523
Hand File

015880523
SIM 73-18800: RNCC: 3 | RNVC: 2

30 Aug 2010

5110-01-588-0524
Bow Saw

015880524
SEY WP-7624: RNCC: 3 | RNVC: 2

30 Aug 2010

5110-01-588-0520
Crosscut Hand Saw

015880520
NIC NSP5: RNCC: 3 | RNVC: 2

30 Aug 2010

5110-01-588-0522
Hand Operated Wire Rope Cutter

015880522
MWT P6300-B: RNCC: 3 | RNVC: 2

30 Aug 2010

5110-01-588-0084
Hand Hacksaw Blade

015880084
RUL GG12: RNCC: 3 | RNVC: 2

29 Aug 2010

5110-01-588-0049
Bolt Cutter

29 Aug 2010

5110-01-587-9749
Craftsman's Knife

015879749
WIS WK8V: RNCC: 3 | RNVC: 2

27 Aug 2010

5110-01-587-9582
Pipe Cutter

015879582
RID 32840: RNCC: 3 | RNVC: 2

26 Aug 2010

5110-01-587-9584
Pipe Cutter Cutting Wheel

015879584
RID 33120: RNCC: 3 | RNVC: 2

26 Aug 2010

5110-01-587-9576
Hand Hacksaw Blade

015879576
NIC 62723: RNCC: 3 | RNVC: 2

26 Aug 2010

5110-01-587-9570
Hand Operated Cable Cutter

015879570
HKP 5090FS: RNCC: 3 | RNVC: 2

26 Aug 2010

5110-01-587-9561
Brick Chisel

015879561
STP 16-334: RNCC: 3 | RNVC: 2

26 Aug 2010

5110-01-587-9567
Hand Wire Stripper-Crimper

015879567
STP 299: RNCC: 3 | RNVC: 2

26 Aug 2010

5110-01-587-9560
Knockout Punch And Die Set

015879560
GBE KOW520: RNCC: 3 | RNVC: 2

26 Aug 2010

5110-01-587-9547
Electricians' Scissors

015879547
HER 100C: RNCC: 3 | RNVC: 2

26 Aug 2010

5110-01-587-9540
Woodworking Butt Chisel

015879540
GNK 1046: RNCC: 3 | RNVC: 2

26 Aug 2010

5110-01-587-9545
Hand Operated Cable Cutter

015879545
KLE 63050: RNCC: 3 | RNVC: 2

26 Aug 2010

5110-01-587-9541
Hand Cable Stripper

015879541
GRE 1903: RNCC: 3 | RNVC: 2

26 Aug 2010

5110-01-587-8167
Circular Saw Blade

015878167
MIL 48-40-4170: RNCC: 3 | RNVC: 2

22 Aug 2010

5110-01-587-8151
Ripping Chisel

015878151
MAY 41201: RNCC: 3 | RNVC: 2

22 Aug 2010

5110-01-587-8137
Circular Saw Blade

015878137
OLD 1407036: RNCC: 3 | RNVC: 2

22 Aug 2010

5110-01-587-6718
Knife Blade

015876718
WIS RWK14D: RNCC: 3 | RNVC: 2

16 Aug 2010

5110-01-587-6704
Crosscut Hand Saw

015876704
STP 20-222: RNCC: 3 | RNVC: 2

16 Aug 2010

5110-01-587-6664
Hand Cold Chisel

015876664
MAY 10202: RNCC: 3 | RNVC: 2

16 Aug 2010

5110-01-587-6699
Woodworking Butt Chisel Set

015876699
STP 16-971: RNCC: 3 | RNVC: 2

16 Aug 2010

5110-01-587-6693
Wallboard Saw

015876693
HYD 09016: RNCC: 3 | RNVC: 2

16 Aug 2010

5110-01-587-6689
Metal Cutting Hand Saw

015876689
NIC 80965: RNCC: 3 | RNVC: 2

16 Aug 2010

5110-01-587-6682
Hand Hacksaw Blade

015876682
NIC 62749: RNCC: 3 | RNVC: 2

16 Aug 2010

5110-01-587-6676
Hand File Set

015876676
NIC 22030H: RNCC: 3 | RNVC: 2

16 Aug 2010

5110-01-587-6658
Hand Cold Chisel

015876658
MAY 10216: RNCC: 3 | RNVC: 2

16 Aug 2010

5110-01-587-6669
Hand Cold Chisel

015876669
MAY 10205: RNCC: 3 | RNVC: 2

16 Aug 2010

5110-01-587-6665
Hand Cold Chisel

015876665
MAY 10220: RNCC: 3 | RNVC: 2

16 Aug 2010

5110-01-587-6652
Hand Cold Chisel

015876652
MAY 10212: RNCC: 3 | RNVC: 2

16 Aug 2010

5110-01-587-6648
Hand Cold Chisel

015876648
MAY 10209: RNCC: 3 | RNVC: 2

16 Aug 2010

5110-01-584-9314
Hand Optical Fiber Stripper

015849314
JIC-375: RNCC: 3 | RNVC: 2

11 May 2010

5110-01-584-5211
Pocket Folding Multi-Tool

015845211
830060: RNCC: 3 | RNVC: 2
KICK: RNCC: 5 | RNVC: 2

28 Apr 2010

5110-01-583-2288
Shave Hook Scraper

015832288
822085-1: RNCC: 3 | RNVC: 2

19 Mar 2010

5110-01-582-7821
Hand Operated Wire Rope Cutter

015827821
10668381-011: RNCC: 3 | RNVC: 9
10668381-011: RNCC: 5 | RNVC: 2

8 Mar 2010

5110-01-582-3933
Hand Wire Stripper

015823933
8270: RNCC: 3 | RNVC: 2
01.57.79.65: RNCC: 5 | RNVC: 2

19 Feb 2010

Load More Results