What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 58 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 58of 112

5110-14-544-3855
Hand Cable Stripper

145443855
05340002000: RNCC: 3 | RNVC: 2
T30150: RNCC: 3 | RNVC: 9
997163: RNCC: 3 | RNVC: 9
JOKARI15: RNCC: 5 | RNVC: 2
232-6714: RNCC: 5 | RNVC: 2
194-2371: RNCC: 5 | RNVC: 2
AA002982: RNCC: 6 | RNVC: 9

26 Jan 2005

5110-14-488-3048
Diagonal Cutting Pliers

144883048
405.10MT: RNCC: 3 | RNVC: 2
405-10MT: RNCC: 5 | RNVC: 2
162-0116: RNCC: 5 | RNVC: 2
3148511751350: RNCC: 5 | RNVC: 2
FACOM405.10MT: RNCC: 5 | RNVC: 9
0175135: RNCC: 5 | RNVC: 9

29 Apr 1997

5110-17-701-3871
Craftsman's Knife

177013871
NO PRIMARY REF 17-701-3871: RNCC: 3 | RNVC: 2

16 May 1970

5110-14-469-2635
Cutting Punch Insert

144692635
DBX50DAREX-3MM: RNCC: 3 | RNVC: 2

15 Apr 1994

5110-27-010-6685
Hand File

270106685
99999-NIIN-DA0014061: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-208-5339
Pettine Filettare M

152085339
4PESDC10X1-75: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-214-4453
Alesatore C.S. Da 1

152144453
040-19.5/21.5: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-639-3974
Single Bit Ax

216393974
UNIT13-3-3: RNCC: 3 | RNVC: 1
39GP3: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-14-294-0779
Tube Cutter

142940779
2101-4: RNCC: 3 | RNVC: 2
2101450: RNCC: 5 | RNVC: 2

1 Jan 1973

5110-98-102-0131
Hand File

981020131
ROUND,SECOND CUT 10IN: RNCC: 3 | RNVC: 1
250MM RD 2ND CUT: RNCC: 3 | RNVC: 2
250MM RD 2ND CUT: RNCC: 5 | RNVC: 9
FA400T STUBS: RNCC: 6 | RNVC: 9

14 Dec 1978

5110-14-370-1160
Jeu Couteaux

143701160
843PC: RNCC: 3 | RNVC: 2
130165: RNCC: 5 | RNVC: 2

18 May 1981

5110-12-156-1636
Hand File Set

121561636
M465: RNCC: 3 | RNVC: 2
M465: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-302-9011

5110-12-155-9437
Bolt Cutter

121559437
NM461: RNCC: 3 | RNVC: 2
NM461: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-639-4341
Hand File

216394341
39GP30: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-14-490-8860
Alesoir

144908860
4067 010 001 867: RNCC: 3 | RNVC: 2
F300 0T 000 5132: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-99-881-4477

5110-99-465-9911

5110-25-136-9949

5110-15-212-7262
Sega A Tazza Con De

152127262
HM4708-47: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-450-4881

5110-21-878-2516
Valve Seat Cutter

218782516
317-00086: RNCC: 3 | RNVC: 2
317-00086: RNCC: 5 | RNVC: 2
2815-0602: RNCC: 6 | RNVC: 9

23 May 1978

5110-15-210-5087
Serie Di 6 Lime In

152105087
ART-2150: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-51-000-6232
Chisel Bar

510006232
PIIS-26.00-00: RNCC: 3 | RNVC: 2

22 May 2008

5110-12-171-3446
Hand Cold Chisel

121713446
5354-12-300: RNCC: 3 | RNVC: 9

30 Sep 1977

5110-99-527-2446
Therm Wire Stripper

995272446
NO PRIMARY REF 99-527-2446: RNCC: 3 | RNVC: 2
L1GHTS0LDSTR1PPER: RNCC: 5 | RNVC: 1
B27790: RNCC: 5 | RNVC: 2
562958: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-120-6126
Fore Plane

121206126
DIN7219-48: RNCC: 2 | RNVC: 2
103S/48: RNCC: 3 | RNVC: 2
EMM103S/48: RNCC: 5 | RNVC: 2
48DIN7219: RNCC: 5 | RNVC: 2
HW2-48: RNCC: 5 | RNVC: 9
652A102-48: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-800-6882
Hand Drill

218006882
03-103: RNCC: 3 | RNVC: 2
77A: RNCC: 3 | RNVC: 2
GGGD671: RNCC: 4 | RNVC: 1
49: RNCC: 5 | RNVC: 2
03-222: RNCC: 5 | RNVC: 9
H1221: RNCC: 5 | RNVC: 9
H1221: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-21-851-1978
Double Bow Cutting Punch

218511978
27: RNCC: 3 | RNVC: 1
149: RNCC: 3 | RNVC: 1
KRIAV121: RNCC: 5 | RNVC: 9
5110-0950: RNCC: 5 | RNVC: 9

2 Aug 1968

5110-15-165-4133
Lima Ad Ago 160 Mm.

151654133
1720C: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-135-1555
Ripping Chisel

991351555
EKA20988: RNCC: 3 | RNVC: 2
08020019011: RNCC: 5 | RNVC: 2

25 Nov 2008

5110-15-208-4701
Lima

152084701
3LLLPNCNCNN500: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-055-3594
Hardy

150553594
61-8434: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-173-1322
Cesoia Beta Taglio

151731322
1112030: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-21-885-2065
Seating And Tr Tool

218852065
QTH38B: RNCC: 3 | RNVC: 2
A0276558: RNCC: 5 | RNVC: 2
A0239558: RNCC: 5 | RNVC: 2
A0239433: RNCC: 5 | RNVC: 9
QTH38A: RNCC: 5 | RNVC: 9

2 Jun 1981

5110-27-011-7688
Hand Reamer

270117688
09013KR1047: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-27-014-8934
Hand Reamer

270148934
3455ATF16420: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-14-271-6969
Plane Cutter Bit

142716969
1569-44: RNCC: 3 | RNVC: 9

1 Jan 1970

5110-21-899-4771
Pulling Bar

218994771
ZT2062-5/16-24: RNCC: 3 | RNVC: 2
ZT2062-5-16-24: RNCC: 5 | RNVC: 2

6 Aug 1985

5110-27-053-8695
Hand Reamer

270538695
A7-709 OP.50: RNCC: 2 | RNVC: 1

30 Jun 2011

5110-14-490-8667
Foret

144908667
4053 010 000 758: RNCC: 3 | RNVC: 2
F300 0T 000 4905: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-13-117-0035
Straight Trimmers Shears

131170035
7825802: RNCC: 3 | RNVC: 2

2 Oct 1998

5110-99-942-0155
Hand Reamer

999420155
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16347: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-215-4030
Pinza Poligrip

152154030
55100010: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-490-8694
Scie

144908694
4061 411 110 600: RNCC: 3 | RNVC: 2
F300 0T 000 4933: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-15-138-1210
Scalpello Piatto Mm

151381210
351005: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-14-560-0160
Knife Blade

145600160
RD-AC-1021: RNCC: 3 | RNVC: 2
10317434: RNCC: 6 | RNVC: 9

13 Mar 2009

5110-21-851-3524
Firmer Chisel Set

218513524
729: RNCC: 3 | RNVC: 2
5110-0181: RNCC: 5 | RNVC: 9

6 Oct 1968

5110-22-608-9807
Compass Saw Blade

226089807
740944: RNCC: 3 | RNVC: 2
3840-228-14-ST-5P: RNCC: 3 | RNVC: 2

7 Dec 2004

5110-66-150-3273
Diagonal Cutting Pliers

661503273
NO PRIMARY REF 66-150-3273: RNCC: 3 | RNVC: 2
01305018: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-98-107-7120
Hand Reamer

981077120
PARALLEL17/64X2X4IN.: RNCC: 3 | RNVC: 2

7 Feb 1984

5110-27-010-6570
Hand File

270106570
99999-NIIN-DA0039382: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-193-0132
Serie Lime

151930132
736-399: RNCC: 3 | RNVC: 2
(241)AA136736-399: RNCC: 5 | RNVC: 2

6 Apr 2010

5110-25-111-8823

5110-15-138-0793
Troncabulloni

151380793
195004: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-321-3771
Hand Operated Wire Rope Cutter

123213771
SH20-A: RNCC: 3 | RNVC: 2

11 May 1990

5110-98-205-7861
Diagonal Cutting Pliers

982057861
DFAMPD02351: RNCC: 2 | RNVC: 2

6 Sep 2002

5110-12-371-2324
Zange Klinge

123712324
10072: RNCC: 3 | RNVC: 2
00.20.28.88: RNCC: 5 | RNVC: 2

5 Mar 2007

5110-12-120-9396
Hand File

121209396
2415-100-3: RNCC: 3 | RNVC: 2

30 May 1969

5110-25-105-4258

5110-66-016-4742
Cylinder Ridge Reamer

660164742
851200: RNCC: 3 | RNVC: 2
CES10207: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-22-618-8137
Cable Stripper Blade

226188137
23001008: RNCC: 3 | RNVC: 2

5 Mar 2009

5110-12-317-1205
Hand File

123171205
0811 411 8068: RNCC: 3 | RNVC: 9
56057723506: RNCC: 5 | RNVC: 2

10 Mar 1989

5110-21-812-4802

5110-15-216-4839
Falcioni Completi C

152164839
FALC-80CM: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-34-037-8021
Embroidery Scissors

340378021
OFC091: RNCC: 5 | RNVC: 2

25 Jun 2008

5110-15-212-2272
Macchina

152122272
EX5110RI4815458: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-343-7802
Riffler

123437802
1804 152: RNCC: 3 | RNVC: 2

25 Jul 1997

5110-99-467-3772

5110-99-722-4795
Cable Strippe Blade

5110-25-116-3274
Woodcarving Gouge

251163274
02787: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-98-104-9063

5110-98-104-1398

5110-98-853-0783

5110-66-098-3139
Diamond Poin Chisel

5110-15-155-6085
Cacciavite Philips

151556085
C.PHILIPS 0: RNCC: 3 | RNVC: 2
(241)A5682C.PHILIPS0: RNCC: 3 | RNVC: 2

30 Apr 2002

5110-21-865-8231
Straight Trimmers Shears

218658231
S1180-7: RNCC: 3 | RNVC: 2

14 Apr 1972

5110-12-182-4941
Hand File Set

121824941
DICK0FILN0RMALHALTERANDTYPE2-3-4: RNCC: 3 | RNVC: 9

6 Feb 1980

5110-14-472-3903
Electricians' Scissors

144723903
841.7: RNCC: 3 | RNVC: 2
3148512069539: RNCC: 5 | RNVC: 2
841-7: RNCC: 5 | RNVC: 2
0206953: RNCC: 5 | RNVC: 9

19 Oct 1994

5110-15-181-6118
Incisore Diamantato

151816118
6365-FS: RNCC: 3 | RNVC: 2

19 Dec 2008

5110-21-899-4770
Pulling Bar

218994770
ZT2052-1/4-28: RNCC: 3 | RNVC: 2

6 Aug 1985

5110-98-107-7140
Hand Reamer

981077140
PARALLEL37/64X3-1/2X7: RNCC: 3 | RNVC: 2

8 Feb 1984

5110-21-895-4072
Rubber Hole Punch

218954072
910-10/32: RNCC: 3 | RNVC: 2

4 Feb 1984

5110-15-185-9958
Hand Saws

151859958
HS50: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-66-124-2333
Scraper Blade

661242333
442: RNCC: 3 | RNVC: 2

27 May 1985

5110-12-126-1981

5110-15-216-4028
Seghetto

152164028
SEGHETTO1: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-221-0146
Estrattore Idraulic

152210146
5319000: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-136-3838
Raschietti

151363838
3278-2-150: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-12-170-4611
Hand Reamer

121704611
DIN 206-B 6HSS: RNCC: 2 | RNVC: 9
DIN206-B-6-HSS: RNCC: 2 | RNVC: 9
11602HSS6: RNCC: 3 | RNVC: 9
513A201HSS6SPIRALGENUTET: RNCC: 3 | RNVC: 9
536C6: RNCC: 3 | RNVC: 9
334-6: RNCC: 5 | RNVC: 9
B6DIN206HSS: RNCC: 5 | RNVC: 9

14 Jul 1977

5110-21-876-0465
Rigid Handle Machete

218760465
284: RNCC: 3 | RNVC: 2

9 Aug 1977

5110-12-122-2561
Hand Reamer

121222561
0SPIRALGENUTET: RNCC: 3 | RNVC: 2

30 May 1969

5110-25-122-8355
Hand File

5110-99-120-4544

5110-25-103-7188

5110-22-300-1160

5110-99-264-5504
Cutter

992645504
LIN8160: RNCC: 3 | RNVC: 2
8160: RNCC: 5 | RNVC: 2
0328O-018: RNCC: 6 | RNVC: 9

24 Jun 2003

5110-99-139-2539
Wire Stop

991392539
L5270: RNCC: 3 | RNVC: 2
100016-9005-364: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-15-147-0715
Punch

151470715
32-5: RNCC: 3 | RNVC: 2

21 Aug 1997

5110-15-192-9869
Chiavi Universali P

151929869
3590001: RNCC: 3 | RNVC: 2
(241)AD7823590001: RNCC: 5 | RNVC: 2

31 Mar 2010

5110-98-205-6472
Hand File

982056472
DFAMPD00101 H: RNCC: 2 | RNVC: 2

27 Jun 2001

5110-15-208-5324
Pettine Filettare M

152085324
4PINDC14X2: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-4741
Alesatore

152084741
3AAXFPFMFQ2-1X3-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-17-110-7122
Bolt Cutter

171107122
412.404: RNCC: 3 | RNVC: 2

4 Feb 1997

5110-98-200-4317

5110-14-244-0808

5110-14-244-0853

5110-22-124-4747
Scissors

221244747
51512: RNCC: 3 | RNVC: 2

19 Dec 1996

5110-12-126-1607

5110-33-190-2400

5110-98-205-5498
Hand File

982055498
DFAMPD00101 E: RNCC: 2 | RNVC: 2

13 Mar 2001

5110-14-567-8064
Fireman's Strap Cutting Knife

145678064
FD02/2004CUTTER: RNCC: 2 | RNVC: 2
4050: RNCC: 3 | RNVC: 2
RA2784: RNCC: 5 | RNVC: 2
NGI0-47762-00000-25: RNCC: 6 | RNVC: 9

13 Apr 2011

5110-98-107-7137
Hand Reamer

981077137
PARALLEL17/32X3X6IN.: RNCC: 3 | RNVC: 2

8 Feb 1984

5110-15-208-4857
Cesoia

152084857
4KBICNCN500: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-022-9332
Hand Cold Chisel

660229332
218: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-22-624-6886
Hand File

226246886
523: RNCC: 3 | RNVC: 2

10 Dec 2012

5110-21-905-9566
Wood File Handle

219059566
4-63R: RNCC: 3 | RNVC: 2

9 Feb 1989

5110-15-230-4049
Lima Abrasiva Trian

152304049
9735/0-100X6: RNCC: 3 | RNVC: 2
511015E067151: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-21-639-3118
Diagonal Cutting Pliers

216393118
207G: RNCC: 3 | RNVC: 2
490429: RNCC: 3 | RNVC: 2
75D7: RNCC: 3 | RNVC: 2
39GP16: RNCC: 4 | RNVC: 1
P8397G: RNCC: 5 | RNVC: 2
7094-007: RNCC: 5 | RNVC: 2
REVC: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-99-910-5573
Tinner's Hollow Cutting Punch

999105573
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H1902: RNCC: 6 | RNVC: 9
F1FA15986: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
DL9A-H1902: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-017-2409
Hand File

660172409
HALFR0UNDFILE: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-15-208-7678
Scalpello

152087678
3SANFLSUM10: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-560-1944
Dimpling Die

145601944
10721399: RNCC: 3 | RNVC: 2

1 Apr 2009

5110-15-208-4982
Scalpello

152084982
3SANMMPRZ170X22: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-369-1483
Straight Trimmers Shears

123691483
365 116-1: RNCC: 3 | RNVC: 2

30 May 2006

5110-21-840-3063

5110-12-129-3892
Hand Reamer

121293892
DIN859-B24-HSS: RNCC: 2 | RNVC: 2
11606240: RNCC: 3 | RNVC: 2
011011-24: RNCC: 3 | RNVC: 2
415-24,00: RNCC: 3 | RNVC: 2
11606HSS24: RNCC: 5 | RNVC: 2
24DIN859SCHNELLARBEITSSTAHLSPIR-: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-150-2345
Scraping Knife

661502345
NO PRIMARY REF 66-150-2345: RNCC: 3 | RNVC: 2
00409155: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-12-148-5979
Hand Reamer

121485979
NO PRIMARY REF 12-148-5979: RNCC: 3 | RNVC: 2
101299: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-244-0864

5110-21-105-2236

5110-12-126-1895
Cutting Punch Insert

121261895
TL5110-0033-B9: RNCC: 2 | RNVC: 2
8680: RNCC: 3 | RNVC: 2
1680: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-217-6382
Allargatubi X Rame

152176382
ALLARGATUBIXRAME: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-138-3428
Hydrau Nut Splitter

991383428
033600: RNCC: 3 | RNVC: 2
H22505: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-12-316-7909
Knife Blade

123167909
30: RNCC: 3 | RNVC: 2
30,21: RNCC: 5 | RNVC: 2
30,44: RNCC: 5 | RNVC: 2
07L1369: RNCC: 5 | RNVC: 2
30: RNCC: 5 | RNVC: 2

14 Feb 1989

5110-15-128-2134
Lama In Acciaio Da

151282134
2800-4: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-27-010-6575
Hand File

270106575
99999-NIIN-DA0037262: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-66-150-3389
Hand Operated Wire Rope Cutter

661503389
NO PRIMARY REF 66-150-3389: RNCC: 3 | RNVC: 2
05625212: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-21-895-4477
Hand File

218954477
937430: RNCC: 3 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

20 May 1984

5110-14-244-3693

5110-99-549-6840
Hex Wrench Steel

995496840
BO766: RNCC: 3 | RNVC: 2

29 Apr 2004

5110-15-165-3975
Lima Piatta Paralle

151653975
2350G812D: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-21-639-4879
Hand File

216394879
39GP53: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-41-001-5437
Bearing Scraper

410015437
5062-021: RNCC: 3 | RNVC: 2

23 Aug 2010

5110-66-086-8306
Hand Reamer

660868306
652 3573: RNCC: 3 | RNVC: 2

15 Jan 1976

5110-25-139-2890
Hand Cable Stripper

5110-66-104-4845

5110-98-107-5962

5110-15-195-6861
Diagonal Cutting Pliers

151956861
U160L122: RNCC: 3 | RNVC: 2
(241)A9410U160L122: RNCC: 5 | RNVC: 2
511015E097665: RNCC: 5 | RNVC: 9

21 Apr 2011

5110-27-019-2818
Impact Numbering Machine

270192818
10131KR0042: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-541-1170
Diagonal Cutting Pliers

145411170
0175852: RNCC: 3 | RNVC: 2
425.C: RNCC: 3 | RNVC: 2

14 May 2004

5110-99-910-9978
Hand Reamer

999109978
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
10137: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16244: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-010-9107
Single Bow Cutting Punch

660109107
27186: RNCC: 3 | RNVC: 2
2883-9: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-15-134-6049
Archetto Tipo Puk C

151346049
2796-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-230-0206
Lima Tonda 0"

152300206
02M/0: RNCC: 3 | RNVC: 2
511015E005672: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-14-369-2322
Grattoir Pour Pales

143692322
321A11010000-69 12: RNCC: 3 | RNVC: 2
6912D11-0100-00: RNCC: 3 | RNVC: 9
321A11010000-69 12: RNCC: 5 | RNVC: 2
6912-321-11-0100-00: RNCC: 5 | RNVC: 2
6912-321-11-0100-00: RNCC: 5 | RNVC: 2
6912D11-0100-00: RNCC: 5 | RNVC: 2

17 Apr 1981

5110-15-165-4100
Lima Per Materie Pl

151654100
26285260: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-244-0825

5110-98-205-4767
Hand Reamer

982054767
DFAMPD00207 Q: RNCC: 2 | RNVC: 2

12 Oct 2000

5110-21-865-8109

5110-21-885-1912

5110-12-126-1761
Breast Drill

121261761
50.033.4: RNCC: 3 | RNVC: 2
810: RNCC: 5 | RNVC: 9
134A1: RNCC: 5 | RNVC: 9
5110-12070: RNCC: 6 | RNVC: 9
5120-12070: RNCC: 6 | RNVC: 9

30 May 1969

5110-22-221-3874
Hand File

222213874
2-304-16-1: RNCC: 3 | RNVC: 2

12 Dec 1972

5110-99-409-4721
Hand Reamer

994094721
HB 4: RNCC: 3 | RNVC: 2
TDS-50: RNCC: 5 | RNVC: 1
04B4: RNCC: 5 | RNVC: 2
600-672: RNCC: 5 | RNVC: 2

20 Aug 1993

5110-21-105-0680
Hand Masonry Drill

211050680
02110: RNCC: 3 | RNVC: 2
10: RNCC: 5 | RNVC: 1
5110: RNCC: 5 | RNVC: 9
1F32250: RNCC: 6 | RNVC: 9

9 Jun 1964

5110-17-115-0164
Hand Wire Stripper

171150164
45-144: RNCC: 3 | RNVC: 2

1 Jul 2002

5110-22-623-0847
Rip Hand Saw

226230847
TT54261: RNCC: 3 | RNVC: 2

24 Oct 2011

5110-17-700-9989
Hand Masonry Drill

177009989
DAK0620320: RNCC: 3 | RNVC: 2

15 May 1970

5110-14-380-4784
Couteau A Araser

143804784
FD1929: RNCC: 3 | RNVC: 2
595213: RNCC: 5 | RNVC: 2

29 Nov 1982

5110-15-210-7965
Raspa Mezza Tonda 6

152107965
ART1505/6: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-329-4403
Hand Cable Stripper

123294403
949014-1: RNCC: 3 | RNVC: 2
949014-1: RNCC: 5 | RNVC: 9

19 Aug 1992

5110-12-329-4404
Cable Stripper Blade

123294404
949015-1: RNCC: 3 | RNVC: 2
949015-1: RNCC: 5 | RNVC: 9

19 Aug 1992

5110-17-701-4742
Hand Reamer

177014742
11-25H7DIN206SS: RNCC: 2 | RNVC: 1
586-11-25: RNCC: 3 | RNVC: 2
DIN206: RNCC: 4 | RNVC: 1

14 May 1970

5110-17-115-1755
Metal Cutting Hand Saw

171151755
ECLIPSE 73-66SR: RNCC: 3 | RNVC: 2

3 Oct 2002

5110-27-010-6688
Hand File

270106688
99999-NIIN-DA0014058: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-27-010-6592
Hand File

270106592
99999-NIIN-DA0037145: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-12-382-7757
Hand Wire Stripper

123827757
12 50 200: RNCC: 3 | RNVC: 2
4003773034407: RNCC: 5 | RNVC: 2

6 Aug 2010

5110-14-230-4811

5110-15-136-3989
Tronchesi

151363989
1852-210: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-21-868-0146
Diagonal Cutting Pliers

218680146
E711: RNCC: 3 | RNVC: 2

14 Jul 1972

5110-99-793-3397
Pisto Cone Assembly

997933397
MC1276140: RNCC: 3 | RNVC: 2

30 Aug 2002

5110-98-107-5952
Hand File

981075952
300MM,THREE SQUARE,BASTARD: RNCC: 5 | RNVC: 9

3 Nov 1983

5110-99-724-5261
Hand Bench Shears

997245261
RE100 SC: RNCC: 3 | RNVC: 2

22 Mar 2006

5110-12-360-4010
Hand Reamer

123604010
RMB99-00-100000: RNCC: 3 | RNVC: 2
406089: RNCC: 5 | RNVC: 2

19 May 2003

5110-12-126-1208
Firmer Chisel

121261208
NO PRIMARY REF 12-126-1208: RNCC: 3 | RNVC: 2
B24HLDIN5140: RNCC: 5 | RNVC: 9

30 May 1969

5110-98-205-5114
Hand File

982055114
DFAMPD00101 A: RNCC: 2 | RNVC: 2

11 Jan 2001

5110-14-274-2426

5110-12-309-0773
Hand File

123090773
NO PRIMARY REF 12-309-0773: RNCC: 3 | RNVC: 2
2182-100-1: RNCC: 5 | RNVC: 9

11 Dec 1986

5110-15-137-8581
Spatola Acciaio 60M

151378581
6303/2-60: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-99-910-5786
Saws Nested Blade

999105786
NO PRIMARY REF 99-910-5786: RNCC: 3 | RNVC: 2
UKD1S2108A: RNCC: 5 | RNVC: 2
1C3179: RNCC: 6 | RNVC: 9
51-11PT20: RNCC: 6 | RNVC: 9
9105786: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-973-8501
Plat Adjusting Tool

999738501
MC1276090: RNCC: 3 | RNVC: 2

16 May 2002

5110-14-310-3897

5110-15-165-3813
Lima Per Meccanica

151653813
2561310: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-25-140-4582
End Cutting Nippers

251404582
593AE: RNCC: 3 | RNVC: 2

24 Oct 1991

5110-15-216-5230
Cesoia Da Banco Da

152165230
4KBILECN150: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-062-5542
Tinner's Hollow Cutting Punch

150625542
3702-5: RNCC: 3 | RNVC: 2

31 May 1981

5110-27-040-6124
Faya Kesme Makinasi

270406124
5110-TJ1-08768: RNCC: 2 | RNVC: 1

4 Feb 2008

5110-27-014-9004
Single Bow Cutting Punch

270149004
5110ATFD0116: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-27-000-8048
Single Bow Cutting Punch

270008048
5700 24 0009: RNCC: 3 | RNVC: 2

11 Jun 1991

5110-15-123-7394
Forbici Per Carta

151237394
644G260: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-341-3827
Hand Metal Stamping Die

123413827
WRYUG7378: RNCC: 3 | RNVC: 2
A049470160003: RNCC: 5 | RNVC: 2

29 Aug 1996

5110-15-210-4791
Fustella

152104791
EX5110RN0406431: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-432-8951

5110-15-123-6288
Pinze A Fustella

151236288
1998: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-185-9898
Puntatrice Ad Aria

151859898
1554002: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-14-325-3427

5110-12-305-3850
Hand Metal Stamping Die Set

123053850
TL5110-0028-050: RNCC: 2 | RNVC: 2
62300140: RNCC: 3 | RNVC: 2
122 A-Z/4: RNCC: 5 | RNVC: 9
78402104: RNCC: 5 | RNVC: 9
TK-KG55-5110-480-050: RNCC: 5 | RNVC: 9
DIN7353-SATZKLEIN-4: RNCC: 5 | RNVC: 9

30 Oct 1985

5110-21-889-5848
Hand Hacksaw Blade

218895848
12-24: RNCC: 3 | RNVC: 1
30E-1224: RNCC: 3 | RNVC: 2

18 Jul 1982

5110-99-432-8995

5110-99-432-9009

5110-33-206-7578
Tijera Para Inglete

332067578
790.430: RNCC: 3 | RNVC: 2

2 Jun 2008

5110-15-232-0448
Tronchese Tagliente

152320448
016002: RNCC: 3 | RNVC: 2
511015E095407: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-99-432-8911

5110-15-209-6527
Fustella

152096527
FUST-1: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-19-001-8154
Crosscut Hand Saw

190018154
80.118: RNCC: 3 | RNVC: 2

5 Jul 2006

5110-15-137-8567
Com Pialla Di Legno

151378567
5832/1: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-002-0089

5110-37-524-9219
Hand Cable Stripper

375249219
P-960: RNCC: 3 | RNVC: 2

28 Nov 2012

5110-15-221-9143
Serie Lime Da Legno

152219143
8-10-12: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-16-006-1649
Hand File

160061649
286211213015: RNCC: 3 | RNVC: 2
8595055900235: RNCC: 5 | RNVC: 2
PSO 300/1: RNCC: 5 | RNVC: 2

9 Dec 2008

5110-15-136-5593
Co Cacciacoppiglia

151365593
3646-125: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-136-3779
Raschietto

151363779
7366-19: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-21-102-8196

5110-21-102-8863

5110-12-384-9578
Hand Rasp

123849578
52.000.010: RNCC: 3 | RNVC: 2
52.000.010: RNCC: 5 | RNVC: 2

13 Apr 2011

5110-15-208-8124
Lima

152088124
3LCNMZNVBSN200: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-610-5012
Circle Cutter

226105012
4.328.903.915: RNCC: 3 | RNVC: 2

27 May 2005

5110-21-905-9377
Pocket Knife

219059377
2185-6: RNCC: 3 | RNVC: 2
695: RNCC: 5 | RNVC: 2

12 Nov 1988

5110-66-159-5299
Straight Trimmers Shears

661595299
7.6363: RNCC: 3 | RNVC: 2
7.6363: RNCC: 5 | RNVC: 2

30 Aug 2011

5110-32-001-5554
Rigid Handle Machete

320015554
NO PRIMARY REF 32-001-5554: RNCC: 3 | RNVC: 2
DRG NO. P/76/040: RNCC: 5 | RNVC: 9
SAF-DR-M-0024: RNCC: 5 | RNVC: 9
SAF/SPEC/G/108: RNCC: 5 | RNVC: 9
03423B: RNCC: 6 | RNVC: 9
DMO/GED/M/0005: RNCC: 7 | RNVC: 2

12 Apr 1977

5110-99-990-0468
Wire Blade Assembly

999900468
FV2258047: RNCC: 3 | RNVC: 2

1 Oct 2009

5110-14-242-9337
Hand Masonry Drill

142429337
2402M6: RNCC: 3 | RNVC: 2
6B: RNCC: 3 | RNVC: 2
4492M6: RNCC: 3 | RNVC: 9

1 Jan 1967

5110-12-304-1804
Bolt Cutter

123041804
6038: RNCC: 3 | RNVC: 9

20 Jun 1985

5110-22-304-0254
Hss Haand Rival

223040254
V3504-8: RNCC: 6 | RNVC: 9

19 Oct 1974

5110-99-254-4344
Dimpling Punch

992544344
2-S200M-1: RNCC: 3 | RNVC: 2
2-S200-1: RNCC: 5 | RNVC: 1
1C-8740: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-25-136-4858

5110-17-110-7371
Hand Reamer

171107371
P926-0,2460-0,2500: RNCC: 3 | RNVC: 2
P926: RNCC: 6 | RNVC: 9

18 Feb 1997

5110-15-204-8348
Confezione 10 Lame

152048348
1771RL: RNCC: 3 | RNVC: 2
(241)AK0621771RL: RNCC: 5 | RNVC: 2

13 Jan 2012

5110-15-173-5630
Forbice Lame Curve

151735630
8211991: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-14-215-0218

5110-99-762-7046

5110-15-208-8769
Lima Piatta Impiego

152088769
3LCNPNCNMDN203: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-212-4496
Tronchese

152124496
E67: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-138-1332
Firmer Gouge

991381332
BS1943: RNCC: 4 | RNVC: 1
DEF STAN 51-11:PART 27: RNCC: 4 | RNVC: 1
58R40025: RNCC: 6 | RNVC: 9
BS1943-TABLE 3A: RNCC: 6 | RNVC: 9
TABLE 3A: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-132-5231
Sgorbia Manicata -

151325231
5235G7-10: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-66-149-7523
Hand File

661497523
NO PRIMARY REF 66-149-7523: RNCC: 3 | RNVC: 2
07076309: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-14-285-6333
Thread Restorer File

142856333
NO PRIMARY REF14-285-6333: RNCC: 3 | RNVC: 2
1850: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-99-428-7276

5110-99-150-5490

5110-99-206-9055

5110-17-110-7355
Hand Reamer

171107355
P926-0,1635-0,1562: RNCC: 3 | RNVC: 2
P926-: RNCC: 6 | RNVC: 9

18 Feb 1997

5110-12-120-6038
Gimlet

121206038
DIN6445-A6: RNCC: 2 | RNVC: 2
206154: RNCC: 3 | RNVC: 2
A6DIN6445: RNCC: 5 | RNVC: 2
5635-6: RNCC: 5 | RNVC: 9
1323375711217220: RNCC: 5 | RNVC: 9
0808327550590: RNCC: 5 | RNVC: 9
TGL 48-75122: RNCC: 5 | RNVC: 9
DIN6445A6: RNCC: 5 | RNVC: 9

30 May 1969

5110-98-102-1624
Diagonal Cutting Pliers

981021624
66CG: RNCC: 3 | RNVC: 2
491-3: RNCC: 3 | RNVC: 2
86: RNCC: 3 | RNVC: 2
942C: RNCC: 3 | RNVC: 2
190-6 FULLER: RNCC: 3 | RNVC: 2
PL46C: RNCC: 6 | RNVC: 9
PW772/6 ELLIOTT LUCAS: RNCC: 6 | RNVC: 9
942-6C: RNCC: 6 | RNVC: 9

1 Jun 1990

5110-99-122-5645
Shave Hook Scraper

991225645
NO PRIMARY REF 99-122-5645: RNCC: 3 | RNVC: 2
UT1L1TY: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-99-465-1908
Blade

994651908
NO PRIMARY REF 99-465-1908: RNCC: 3 | RNVC: 2
W4WD06876: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-15-124-3100
Scalpello Con Tagli

151243100
9106-200: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-910-9968

5110-99-910-5391

5110-99-910-6448

5110-15-208-5026
Scalpello Da Falegn

152085026
3SANFLCNZ15: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-5036
Scalpello Da Falegn

152085036
3SANFLCNM6: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-4789
Lima

152084789
3LPKMZAGMDN120: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-807-1017

5110-66-025-5472
Jungle Saw

660255472
549: RNCC: 2 | RNVC: 2
ADE(M)167: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-15-207-2249
Attrezzo Multiuso

152072249
A.MLT: RNCC: 3 | RNVC: 2
(241)AJ720A.MLT: RNCC: 5 | RNVC: 2

25 Sep 2012

5110-25-114-5784

5110-22-270-9221

5110-21-105-2046
Single Bow Cutting Punch

211052046
158: RNCC: 3 | RNVC: 1
147: RNCC: 3 | RNVC: 1
5721: RNCC: 3 | RNVC: 1
M29: RNCC: 3 | RNVC: 2
GGGP831: RNCC: 4 | RNVC: 1

4 Jun 1968

5110-15-212-8069
Dispositivo Per Inc

152128069
19665: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-517-1392
Reamer Blade Set

995171392
HW BLADES: RNCC: 3 | RNVC: 2

20 Nov 1991

5110-15-189-9869
Tronchese Taglio A

151899869
158-5760: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-14-243-7631

5110-12-341-2212
Half Hatchet

123412212
5267250000: RNCC: 3 | RNVC: 2
5267.25: RNCC: 5 | RNVC: 2

9 Aug 1996

5110-25-120-0363
Hand Metal Cutting Shears

251200363
C0MBISCHERE48: RNCC: 3 | RNVC: 2
48: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-22-600-4849
Hand Metal Cutting Shears

4 Jul 2002

5110-15-216-9550
Tagliavetro (Diaman

152169550
ZZZ19: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-98-205-6473
Hand File

982056473
DFAMPD00101 I: RNCC: 2 | RNVC: 2

27 Jun 2001

5110-25-101-4635
Craftsman's Knife

251014635
210MMLG: RNCC: 5 | RNVC: 1

1 Jan 1984

5110-14-471-9898
Jeu Rifloirs

144719898
AS.6RI180T2: RNCC: 3 | RNVC: 2
0647400: RNCC: 5 | RNVC: 2
3148516474001: RNCC: 5 | RNVC: 2
AS.6 RI 180 T2: RNCC: 5 | RNVC: 2
AS6RI180T2: RNCC: 5 | RNVC: 2

28 Sep 1994

5110-15-176-2731
5X30 2X6 Giravite 1

151762731
012810106: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-27-011-1262
Hand File

270111262
10121ME0058: RNCC: 2 | RNVC: 1
07002YE0136: RNCC: 2 | RNVC: 1

20 Jan 2003

5110-99-402-0230

5110-99-402-0406

5110-12-334-6368
Knife Blade

123346368
56: RNCC: 3 | RNVC: 2
56.20: RNCC: 5 | RNVC: 2

1 Jun 1994

5110-37-556-8005
Digital Multimeter

375568005
FLK-87: RNCC: 5 | RNVC: 1

2 Apr 2004

5110-99-701-2188
Coping Saw Blade

997012188
71-CP7R: RNCC: 3 | RNVC: 2
CP7ND: RNCC: 5 | RNVC: 2

7 Nov 1991

5110-15-186-0916
Lama Per Tornire Si

151860916
9731G-12: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-66-149-8111
Bolt Cutter

661498111
NO PRIMARY REF 66-149-8111: RNCC: 3 | RNVC: 2
07496303: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-14-501-7906
Emporte Piece

145017906
NO PRIMARY REF14-501-7906: RNCC: 3 | RNVC: 2
75110 293 0107: RNCC: 5 | RNVC: 9
4067 790 001 761: RNCC: 5 | RNVC: 9
F300 0T 000 5257: RNCC: 6 | RNVC: 9

10 Nov 1997

5110-15-230-3951
Raspa Mezza Tonda

152303951
2658/1-12": RNCC: 3 | RNVC: 2
511015E060155: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-126-1470
Serie Stampi Trafor

151261470
3679-2-50: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-910-4156
Instrument Broach

999104156
DEF1198: RNCC: 4 | RNVC: 1
FA10550: RNCC: 6 | RNVC: 9
9104156: RNCC: 6 | RNVC: 9
1A4004: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-428-8984

5110-25-118-3797
Hand Reamer

251183797
FRANKENDIN206HSSNR600-4-2MM: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-21-849-7971
Bow Saw

218497971
9.51: RNCC: 3 | RNVC: 1
9: RNCC: 3 | RNVC: 2
224B: RNCC: 3 | RNVC: 2
5110-1016: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-17-110-7386
Hand Reamer

171107386
P926-0,3750-0,3330: RNCC: 3 | RNVC: 2
P926: RNCC: 6 | RNVC: 9

18 Feb 1997

5110-21-105-2499
Hand Metal Cutting Shears

211052499
S1144: RNCC: 3 | RNVC: 2
S220: RNCC: 3 | RNVC: 2
S-1144: RNCC: 5 | RNVC: 2
309801: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-21-637-5431
Hand Reamer

216375431
B94-2: RNCC: 3 | RNVC: 1
B174-2: RNCC: 3 | RNVC: 1
712-049717: RNCC: 3 | RNVC: 2
B5-14: RNCC: 4 | RNVC: 1
50-10977: RNCC: 5 | RNVC: 9

4 Jun 1968

5110-15-133-3404
Mazzuolo Diam. Mm.

151333404
1392-35: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-98-857-8304
Half Round N Chisel

5110-21-639-5245
Hand Diamond Point Chisel

216395245
39GP43: RNCC: 4 | RNVC: 1
350-1/2: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-15-208-3464
Lima

152083464
3LMMPQCNBSC250: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-184-6258
Raschietto Manico B

151846258
3ZANBZCNM300: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-140-9217
Di Fraesvorrichtung

121409217
124430: RNCC: 3 | RNVC: 2
4612: RNCC: 5 | RNVC: 9

30 May 1969

5110-20-004-8874
Diagonal Cutting Pliers

200048874
2477E: RNCC: 3 | RNVC: 2

10 Jun 2009

5110-15-211-7940
Pettine Ravvivafile

152117940
9P65TTRF: RNCC: 5 | RNVC: 3
9P65TTRF: RNCC: 5 | RNVC: 9

16 Nov 2005

5110-15-176-0327
Butteruole Per Riba

151760327
P089431: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-17-701-0941
Single Bit Ax

177010941
41H1641: RNCC: 3 | RNVC: 2
41H1641: RNCC: 6 | RNVC: 9

15 May 1970

5110-15-136-3854
Cesoie

151363854
203E260: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-22-221-4628
Ship Scraper

222214628
SKRABER,VINKEL 30X60X300MM: RNCC: 3 | RNVC: 2

9 Jan 1973

5110-66-013-5555
Hand File

660135555
THREE SQUARE 10 IN: RNCC: 3 | RNVC: 1
07083004: RNCC: 5 | RNVC: 2
916180: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-21-901-6670
Hand File

219016670
39-GP-53: RNCC: 4 | RNVC: 1
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

22 Sep 1986

5110-12-337-2655
Sealing Surface Milling Cutter

123372655
11.49007-0052: RNCC: 3 | RNVC: 2
434.011: RNCC: 5 | RNVC: 2
11.49007-0052: RNCC: 5 | RNVC: 9
434.011: RNCC: 5 | RNVC: 9

8 Feb 1995

5110-14-274-8370

5110-21-843-7757
Hand Reamer

218437757
B174-2: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
712-049162: RNCC: 3 | RNVC: 2
B5-14: RNCC: 4 | RNVC: 1
50-10966: RNCC: 5 | RNVC: 9

4 Jun 1968

5110-99-126-3697
Flexi-Hone Cylinder

991263697
PHGBD3-3/4 (95MM): RNCC: 3 | RNVC: 2
PHGBD3-3/4 (95MM): RNCC: 5 | RNVC: 2

23 Oct 1996

5110-12-143-9484
Kornmarkierungsmeis

121439484
1001W10: RNCC: 2 | RNVC: 2
1454366: RNCC: 3 | RNVC: 2
1001W10: RNCC: 5 | RNVC: 9
1001W10: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-282-8296

5110-27-019-4362
Hand File

270194362
10091KEGE0029: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-66-104-4851

5110-21-807-1134

5110-66-104-4846

5110-22-611-2262
Hand Optical Fiber Cleaving Tool

226112262
KC-599FO: RNCC: 3 | RNVC: 2

11 Aug 2005

5110-14-488-3053
Diagonal Cutting Pliers

144883053
416.12MT: RNCC: 3 | RNVC: 2
3148511755235: RNCC: 5 | RNVC: 2
416-12MT: RNCC: 5 | RNVC: 2
8043226R00: RNCC: 5 | RNVC: 2
0175523: RNCC: 5 | RNVC: 2

29 Apr 1997

5110-99-252-8404
Thread Restorer File

992528404
015600: RNCC: 3 | RNVC: 2
425BSW: RNCC: 5 | RNVC: 2
425BSF: RNCC: 5 | RNVC: 2
425BSW: RNCC: 5 | RNVC: 2
425BSF: RNCC: 5 | RNVC: 2
1C/8699: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-895-4479
Hand File

218954479
937486: RNCC: 3 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

20 May 1984

5110-15-165-3652
Scalpello Per Legno

151653652
6055112: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-177-1707
Hand Reamer

121771707
45B3: RNCC: 3 | RNVC: 9
11610060: RNCC: 3 | RNVC: 9
7590B3: RNCC: 3 | RNVC: 9
539A3: RNCC: 3 | RNVC: 9

17 Jan 1979

5110-99-549-4520
Socket Gland Nut

995494520
MC1276041: RNCC: 3 | RNVC: 2

16 May 2002

5110-15-165-4242
Tronchese Con Intag

151654242
243500: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-244-0783

5110-99-924-2664

5110-12-384-8362
Hand File

123848362
46.000.048: RNCC: 3 | RNVC: 2

4 Apr 2011

5110-22-624-1718
Wire Stripper Blade Set

226241718
9032220000: RNCC: 3 | RNVC: 2
9032220000: RNCC: 3 | RNVC: 2

26 Jul 2012

5110-15-175-2691
Alesatore

151752691
3AAXFCFRDP10-75: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-66-014-2737
Bearing Scraper

660142737
258-4IN: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-14-202-0089

5110-15-190-0021
Cacciavite Con Lama

151900021
6684503: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-34-037-7541
Paper Cutter

340377541
A3 PAPER CUTTER: RNCC: 5 | RNVC: 2

4 Sep 2008

5110-12-023-0146

5110-14-264-4927

5110-15-230-5518
Cesoia Tagli Pesant

152305518
1116-330: RNCC: 3 | RNVC: 2
511015E076650: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-12-385-2719
File Handle

123852719
50.000.053: RNCC: 3 | RNVC: 2

17 May 2011

5110-15-237-2675
Lima Tonda

152372675
HVA 505698155: RNCC: 3 | RNVC: 2
511015E034199: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-99-401-9751

5110-25-126-6696
Sheet Metal Ripping Cutter

251266696
10313488: RNCC: 3 | RNVC: 2
5811.053: RNCC: 5 | RNVC: 2
10 313 488: RNCC: 5 | RNVC: 2
U10-102LANGNR2: RNCC: 5 | RNVC: 2
10-313-488: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-12-140-1495
Hand Reamer

121401495
101.10.000: RNCC: 3 | RNVC: 2
101-10-000: RNCC: 5 | RNVC: 2
800-3HC: RNCC: 5 | RNVC: 2

30 May 1969

5110-25-100-5856
Hand Cold Chisel

251005856
NO PRIMARY REF25-100-5856: RNCC: 3 | RNVC: 2
41-2222-400-016: RNCC: 5 | RNVC: 2
223 2750: RNCC: 5 | RNVC: 2
223-2750: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-12-349-3998
Hand File

123493998
1613P-250-3: RNCC: 3 | RNVC: 2
1613253: RNCC: 5 | RNVC: 2

9 Nov 1999

5110-15-208-4620
Alesatore

152084620
3AAXFCFMDQ21-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-301-2375

5110-12-316-7203
Handfraese Auflage

123167203
105-31821W4.010: RNCC: 3 | RNVC: 2
105-31821W4-010: RNCC: 5 | RNVC: 2

7 Feb 1989

5110-22-607-3160
Hand File

226073160
4-138-12-1-0: RNCC: 3 | RNVC: 2
8019723: RNCC: 3 | RNVC: 2

5 Jun 2004

5110-22-610-1335
Hand File

226101335
1-100-10-1-3: RNCC: 3 | RNVC: 2

11 Apr 2005

5110-12-311-7106
Craftsman's Knife

123117106
61545 UND 55257: RNCC: 3 | RNVC: 9
919.170/171: RNCC: 3 | RNVC: 9
086.191.0: RNCC: 3 | RNVC: 9

8 Oct 1987

5110-15-165-4062
Coltello

151654062
SW7S: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-13-117-1319
Pliers

131171319
3059000129: RNCC: 3 | RNVC: 2

2 Feb 1999

5110-99-601-0896

5110-14-531-1464
Hand Bushing Splitting Tool

145311464
TB3011216: RNCC: 3 | RNVC: 2

24 Jul 2002

5110-15-208-4997
Scalpello

152084997
3SANFLSUP20: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-33-207-0361
End Cutting Nippers

332070361
8310: RNCC: 3 | RNVC: 2

20 Oct 2008

5110-14-270-3962

5110-14-336-5406

5110-15-125-4597
Tagliatubi Fino A 4

151254597
330-4: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-22-614-0762
Bolt Cutter

226140762
570598 210002 5: RNCC: 3 | RNVC: 2

19 Sep 2006

5110-17-112-6932
Handwer Messenstel

5110-12-121-4115
Hand File

121214115
TL5110-0036-710: RNCC: 2 | RNVC: 2
1172-250-2: RNCC: 3 | RNVC: 2
DIN7261-G250-2: RNCC: 5 | RNVC: 1
TK5110-219-710: RNCC: 5 | RNVC: 2
DIN7261G250-2: RNCC: 5 | RNVC: 9
G250-2DIN7261: RNCC: 5 | RNVC: 9
TK-KG55-5110-219-710: RNCC: 5 | RNVC: 9
A250X2DIN8339: RNCC: 5 | RNVC: 9
1172-250-2: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-309-0755
Hand File

123090755
2132101: RNCC: 3 | RNVC: 2
2132-100-1: RNCC: 5 | RNVC: 2

11 Dec 1986

5110-27-019-2841
Hand File

270192841
10131ME1025: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-12-130-7614

5110-14-397-4872
Outil De Denudage

143974872
73120010: RNCC: 3 | RNVC: 2

14 Dec 1984

5110-15-210-5172
Coltello Multi Uso

152105172
ART24020: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-010-5186

5110-15-208-5384
Sega

152085384
5NCNC0800: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-17-121-8829
Pocket Knife

171218829
LE 6081-NS-LR (LANYARD RING): RNCC: 3 | RNVC: 2

22 Jan 2009

5110-14-244-0691

5110-21-879-9059
Hand Metal Cutting Shears

218799059
CLG10: RNCC: 3 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

24 Apr 1979

5110-15-190-3663
Trivellone Lungh.Mm

151903663
3UAN0RQU45X450: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-21-880-8738
Hand File

218808738
84-167000: RNCC: 3 | RNVC: 2
39-GP-53: RNCC: 5 | RNVC: 2

23 Apr 1980

5110-12-360-4145
Hand Reamer

123604145
RMB99-00-100000.01: RNCC: 3 | RNVC: 2
406090: RNCC: 5 | RNVC: 2

20 May 2003

5110-99-910-5397
Cap Plane Iron

5110-21-849-6670
Bucksaw Blade

218496670
403: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-15-208-4145
Lima

152084145
2628B: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-4521
Alesatore

152084521
3AARPERMDQ27: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-230-4134
Lima Piatta

152304134
2560/2/8: RNCC: 3 | RNVC: 2
511015E078592: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-17-015-5852
Hand File

170155852
TVA5110-2-263-006-1.1.3: RNCC: 3 | RNVC: 2
TVA5110-2-263-006: RNCC: 5 | RNVC: 1
1137: RNCC: 5 | RNVC: 9

17 Jun 1972

5110-99-744-5725
Hand Wire Str Blade

997445725
L-5361 (MOD): RNCC: 3 | RNVC: 2
L5361(MOD): RNCC: 5 | RNVC: 2
L5361 (MOD): RNCC: 6 | RNVC: 9
1H1142: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-126-2027
Hand Reamer

121262027
111.15.000: RNCC: 3 | RNVC: 2
111-15-000: RNCC: 5 | RNVC: 2
600-4HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-27-015-5526
Hand File

270155526
14001YP21617: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-14-451-4113
Double Bow Cutting Punch

144514113
245.J2DIAM38: RNCC: 3 | RNVC: 2

19 Nov 1991

5110-15-208-7752
Alesatore

152087752
3AAWFCFMDP29-9: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-159-2026
Vulcanis Awl Needle

661592026
92817: RNCC: 3 | RNVC: 2
PUNC149-N: RNCC: 5 | RNVC: 2

31 Mar 2011

5110-14-501-3270
Straight Trimmers Shears

145013270
ID-54-493: RNCC: 3 | RNVC: 2

29 Oct 1997

5110-12-140-6882

5110-14-264-4796

Load More Results