What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 57 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 57of 112

5110-99-812-3730

5110-22-611-7573
Craftsman's Knife

226117573
55K0120011: RNCC: 5 | RNVC: 2

12 Oct 2005

5110-14-456-0686
Flexible Carbon Scraper

144560686
8817338000: RNCC: 3 | RNVC: 2

17 Jun 1992

5110-15-001-2654
Knockout Punch And Die Set

150012654
1105/C29T: RNCC: 3 | RNVC: 2

11 Jun 2013

5110-14-271-7001

5110-66-149-7544
Hand File

661497544
NO PRIMARY REF 66-149-7544: RNCC: 3 | RNVC: 2
07081501: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-25-101-9369

5110-25-102-7239
Bolt Cutter

5110-15-179-5437
Pliers

151795437
6700.Y0.03: RNCC: 3 | RNVC: 2

2 Mar 2007

5110-25-101-9370
Single Bow Cutting Punch

251019370
45MMDIA: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-25-119-6498
Avbiter Tang

5110-15-208-4771
Alesatore

152084771
3AAWFCFRDP19: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-010-8522
Poppet Valve Reamer

5110-12-131-7012
Reamer Blade Set

121317012
131.15.400: RNCC: 3 | RNVC: 2
131-15-400: RNCC: 5 | RNVC: 2
700-15HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-25-120-1991
Diagonal Cutting Pliers

251201991
130MMMT0389-12: RNCC: 2 | RNVC: 2

1 Jan 1984

5110-15-175-5246
Rotelle Di Ricambio

151755246
D9789-0030: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-66-149-2321
Straight Trimmers Shears

661492321
NO PRIMARY REF 66-149-2321: RNCC: 3 | RNVC: 2
86536752: RNCC: 5 | RNVC: 2

24 Mar 2003

5110-12-173-2315
Diagonal Cutting Pliers

121732315
DIN5238-A120H-GERAUHT: RNCC: 2 | RNVC: 2
A120HDIN5238-GERAUHT: RNCC: 5 | RNVC: 2
2666: RNCC: 5 | RNVC: 9
DIN5238A120H-GERAUHT: RNCC: 5 | RNVC: 9

29 Mar 1978

5110-12-368-5232
Knockout Punch And Die

123685232
2623-0823-80-00: RNCC: 3 | RNVC: 2

21 Mar 2006

5110-98-105-8771
Hand Reamer

981058771
NO PRIMARY REF 98-105-8771: RNCC: 3 | RNVC: 2
METRIC 2003-17MM: RNCC: 5 | RNVC: 2

30 May 1978

5110-12-123-7109
Adz Handle

121237109
NO PRIMARY REF 12-123-7109: RNCC: 3 | RNVC: 2
DIN7228: RNCC: 5 | RNVC: 9

30 May 1969

5110-98-200-9277
Reamer Blade Set

982009277
NO PRIMARY REF 98-200-9277: RNCC: 3 | RNVC: 2
ST 7: RNCC: 5 | RNVC: 2

20 Feb 1987

5110-17-110-7361
Hand Reamer

171107361
P926-0,2026-0,1910: RNCC: 3 | RNVC: 2
P926-: RNCC: 6 | RNVC: 9

18 Feb 1997

5110-15-133-2734
Pinza Tagliente Dia

151332734
1797-3-115: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-184-6944
Trapano

151846944
5DMNPTN1A6: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-13-102-8926
Hand Reamer

131028926
NBN485H8-19-5CS: RNCC: 2 | RNVC: 2

1 Apr 1975

5110-12-310-1302
Hand Reamer

123101302
DIN206-B6-HSS: RNCC: 2 | RNVC: 2
301-FORM B-6,0: RNCC: 3 | RNVC: 2
160110-6: RNCC: 3 | RNVC: 2
5102HSS6: RNCC: 3 | RNVC: 2
F1131-6,0: RNCC: 3 | RNVC: 2
1332143: RNCC: 5 | RNVC: 2
16010-6: RNCC: 5 | RNVC: 9

9 Apr 1987

5110-99-150-5487

5110-15-208-4843
Alesatore

152084843
3AAXFCFRDP19-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-794-0491
Pocket Knife

997940491
5(TA)115027: RNCC: 3 | RNVC: 2
5TA115027: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-155-6109
Special Sfila Fermi

151556109
(241)A5682SFILAF.1,4: RNCC: 3 | RNVC: 2
SFILA F.1,4: RNCC: 3 | RNVC: 2

30 Apr 2002

5110-15-165-3794
Lima Per Meccanica

151653794
256018: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-21-807-1052
Pipe Cutter

218071052
104X60106: RNCC: 3 | RNVC: 2
104: RNCC: 3 | RNVC: 2

5 Feb 1964

5110-25-119-9583

5110-25-142-7534
Diagonal Cut Pliers

5110-99-910-5380
Plane Cutter Bit

5110-12-334-2283
Brick Chisel

123342283
TL5110-0030-160: RNCC: 2 | RNVC: 2
BW3000-300: RNCC: 3 | RNVC: 2
62230300: RNCC: 3 | RNVC: 2
109HS-300: RNCC: 3 | RNVC: 2
RNN340300: RNCC: 3 | RNVC: 2
109HS-300: RNCC: 3 | RNVC: 9
RNN340300: RNCC: 5 | RNVC: 2
BW3000-300: RNCC: 5 | RNVC: 9
TK-KG55-5110-469-160: RNCC: 5 | RNVC: 9
TK5110-469-160: RNCC: 5 | RNVC: 9

14 Apr 1994

5110-99-052-1372
Saw

990521372
NO PRIMARY REF 99-052-1372: RNCC: 3 | RNVC: 2
BS3159 PART 1: RNCC: 5 | RNVC: 1
575-677: RNCC: 5 | RNVC: 2
B97: RNCC: 5 | RNVC: 2
575-677: RNCC: 6 | RNVC: 9

4 Jul 1997

5110-14-257-7574

5110-99-910-4911
Hand File

999104911
DEF1098: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
H833: RNCC: 6 | RNVC: 9
1A4035: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-230-3974
Tronchese Lunghezza

152303974
1851/125: RNCC: 3 | RNVC: 2
511015E061511: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-14-232-2526
Tube Cutter

142322526
2101-2: RNCC: 3 | RNVC: 2
4024-2: RNCC: 3 | RNVC: 9

1 Jan 1967

5110-15-055-3588
Bucksaw

150553588
56-5-561: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-27-007-3830
Hand File

270073830
A150-2: RNCC: 2 | RNVC: 1
6'': RNCC: 2 | RNVC: 1

20 Jun 2002

5110-15-123-6548
Cesoia Per Lamiera

151236548
2086/1: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-812-3733

5110-99-811-3723
Hand Reamer

5110-99-910-5123
Gimlet

5110-99-910-5358

5110-12-131-4719
Hand Reamer

121314719
141.06.000: RNCC: 3 | RNVC: 2
141-06-000: RNCC: 5 | RNVC: 2
200-35HC: RNCC: 5 | RNVC: 9
V7-9-8-5HARTCHR0M: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-189-6050
Hand Reamer

121896050
NO PRIMARY REF 12-189-6050: RNCC: 3 | RNVC: 2
2370/5: RNCC: 5 | RNVC: 9

7 Oct 1981

5110-66-150-3829
Tailor's Shears

661503829
NO PRIMARY REF 66-150-3829: RNCC: 3 | RNVC: 2
00070040: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-22-617-5186
Hand File Set

226175186
DA8410-126: RNCC: 3 | RNVC: 2

1 Jul 2008

5110-14-266-7018

5110-15-125-5774
Raschietto Triangol

151255774
987022: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-139-8866
Hand File

121398866
NO PRIMARY REF 12-139-8866: RNCC: 3 | RNVC: 2
B250X4DIN8334: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-298-7850
Blacksmith's Chisel

142987850
NO PRIMARY REF14-298-7850: RNCC: 3 | RNVC: 2
668-70: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-99-910-4071
Mitre Box

5110-22-607-5181
Hand Operated Cable Cutter Blade

226075181
7997150370: RNCC: 3 | RNVC: 2

26 Jun 2004

5110-99-135-2740
Magazine Scissors

991352740
ASSK666: RNCC: 3 | RNVC: 1
51753212: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-200-5340

5110-15-209-8132
Cacciavite A Croce

152098132
MH100452: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-186-4730
Cassetta Fiat Tavol

151864730
ART.6.4: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-98-205-6550
Hand File

982056550
DFAMPD00100 H: RNCC: 2 | RNVC: 2

6 Jul 2001

5110-22-222-7856
Craftsman's Knife

222227856
101455: RNCC: 3 | RNVC: 2
OTTER 770 J: RNCC: 3 | RNVC: 2
FOLDEKNIV: RNCC: 5 | RNVC: 9
73-9013-2: RNCC: 6 | RNVC: 9

18 Dec 1981

5110-15-165-4264
Telaio Universale P

151654264
1588961: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-812-3724

5110-15-208-7711
Tronchese

152087711
3TANFDCNDRN160: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-159-6892
Hand Operated Cable Cutter

121596892
2801NB: RNCC: 3 | RNVC: 2
131836: RNCC: 5 | RNVC: 2

30 May 1969

5110-21-868-0142
Hand Diamond Point Chisel

218680142
PPC15: RNCC: 3 | RNVC: 2

14 Jul 1972

5110-15-208-4627
Alesatore Cili.Fis.

152084627
3AAXFCFMEQ2-7: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-25-138-3847

5110-25-102-1248

5110-12-126-1739
Woodcarving Gouge

121261739
NO PRIMARY REF 12-126-1739: RNCC: 3 | RNVC: 2
2573-2-4MM: RNCC: 5 | RNVC: 9
5110-0024-35: RNCC: 5 | RNVC: 9
5110-024-35: RNCC: 5 | RNVC: 9
TL5110-0024-35: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-121-4377

5110-12-345-6857
Diagonal Cutting Pliers

123456857
RX8150: RNCC: 3 | RNVC: 2
0103133: RNCC: 5 | RNVC: 2

15 Apr 1998

5110-14-293-2521
Bent Trimmers Shears

142932521
NO PRIMARY REF14-293-2521: RNCC: 3 | RNVC: 2
21-1569: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-14-204-9387
Fore Plane

142049387
NO PRIMARY REF14-204-9387: RNCC: 3 | RNVC: 2
2502-42CFS: RNCC: 5 | RNVC: 9
D221E42: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-27-024-3604
Blacksmith's Chisel

270243604
05001FK0207: RNCC: 2 | RNVC: 1

15 Oct 2004

5110-33-106-1144
Knockout Punch And Die Set

331061144
332.51: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-27-019-4598
Hand File

270194598
10091KEGE0102: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-005-9756
Steel Strapping Cutter

150059756
767000 260: RNCC: 3 | RNVC: 2
(241)A0019767000 260: RNCC: 5 | RNVC: 2

11 Dec 2013

5110-22-610-4705

5110-15-137-5179
Curvatubo

151375179
130: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-22-601-9209
Hand Graver

226019209
A-206: RNCC: 3 | RNVC: 2

5 Nov 2002

5110-21-807-1129
Hand Reamer

218071129
RP1375: RNCC: 3 | RNVC: 2

5 Feb 1964

5110-12-382-2169
Straight Trimmers Shears

123822169
0712000C: RNCC: 3 | RNVC: 2
0712000S: RNCC: 5 | RNVC: 9

21 May 2010

5110-14-490-8851
Alesoir

144908851
4067 010 001 856: RNCC: 3 | RNVC: 2
F300 0T 000 5123: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-21-847-6067
Craftsman's Knife

218476067
C3: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-169-5940
Incudine

151695940
F72015546: RNCC: 3 | RNVC: 2

5 Nov 2002

5110-98-106-8462
Hand Hacksaw Frame

981068462
PISTOL GRIP 6IN.BLADE: RNCC: 3 | RNVC: 2

27 Nov 1981

5110-27-011-7714
Hand Reamer

270117714
10111KR5015: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-184-6148
Ferro

151846148
3IANISSQ25: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-380-7831
Craftsman's Knife

123807831
BK209482: RNCC: 3 | RNVC: 2

30 Nov 2009

5110-12-130-7616

5110-22-113-5099

5110-21-899-4735
Tube Cutter Cutting Wheel

218994735
R29549-1-28: RNCC: 3 | RNVC: 2

29 Jul 1985

5110-66-149-3487
Pocket Scissors

661493487
NO PRIMARY REF 66-149-3487: RNCC: 3 | RNVC: 2
576602: RNCC: 5 | RNVC: 2

3 Apr 2003

5110-12-362-2378
End Cutting Nippers

123622378
DINISO5748-160: RNCC: 3 | RNVC: 2

28 Jan 2004

5110-98-107-7169
Hand Reamer

981077169
PARALLEL1-1/6X5X10IN.: RNCC: 3 | RNVC: 2

10 Feb 1984

5110-12-126-1430
Hand Rasp

121261430
DIN7263-C300-2: RNCC: 2 | RNVC: 2
19138-300-2: RNCC: 3 | RNVC: 2
1552302: RNCC: 3 | RNVC: 2
1552-300-2: RNCC: 3 | RNVC: 2
C300-2DIN7263: RNCC: 5 | RNVC: 2
B300X2DIN8334R: RNCC: 5 | RNVC: 9
DIN7263C300-2: RNCC: 5 | RNVC: 9

30 May 1969

5110-17-124-3617
Pocket Knife

171243617
262254014006: RNCC: 3 | RNVC: 2

30 May 2012

5110-21-105-0682
Hand Masonry Drill

211050682
5124: RNCC: 3 | RNVC: 2
24: RNCC: 5 | RNVC: 1
1F32275: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-15-218-0933
Lima

152180933
HB4W: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-281-5405

5110-99-910-6454
Classified

999106454
H5018: RNCC: 3 | RNVC: 2
FA17749: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-700-4047
Single Bit Ax

127004047
53-03424006834: RNCC: 2 | RNVC: 2
088.066.023.000: RNCC: 5 | RNVC: 9

1 May 1992

5110-12-130-9612
Korrekt Fraesstahl

121309612
216.62.150: RNCC: 3 | RNVC: 2
000589086908: RNCC: 5 | RNVC: 2
200-13: RNCC: 5 | RNVC: 9
200-13VD1E: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-496-6459
Hand Cable Stripper

994966459
E68-3002: RNCC: 3 | RNVC: 2
MILLS E68-3002: RNCC: 5 | RNVC: 2

18 Mar 2010

5110-99-401-2864

5110-15-123-6230
Archetto Con Tendil

151236230
539 P: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-22-221-3929
Hand File

222213929
270-5: RNCC: 3 | RNVC: 2

14 Dec 1972

5110-21-885-2066
Termination Blade A

218852066
P0517274: RNCC: 3 | RNVC: 2

2 Jun 1981

5110-15-192-5947
Lame Per Cutter (Co

151925947
LAMECUTTERCONFEZIONE10PZ: RNCC: 3 | RNVC: 2

26 Mar 2010

5110-14-453-7025
Pliers

144537025
23C304-4A: RNCC: 3 | RNVC: 2
24C304-4A: RNCC: 5 | RNVC: 9

5 Mar 1992

5110-12-126-1653
Double Bow Cutting Punch

121261653
DIN7200-A7: RNCC: 2 | RNVC: 2
0100070: RNCC: 3 | RNVC: 2
240030: RNCC: 3 | RNVC: 2
TS5110-0821: RNCC: 5 | RNVC: 1
A7DIN7200: RNCC: 5 | RNVC: 2
TS5110-0821-7MM: RNCC: 5 | RNVC: 2
DIN7200A7: RNCC: 5 | RNVC: 9
00.08.92.19: RNCC: 8 | RNVC: 2

30 May 1969

5110-32-072-8630
Stripper

320728630
983921/53: RNCC: 3 | RNVC: 2
983921/53: RNCC: 5 | RNVC: 2

27 Nov 1998

5110-66-076-9571
Hand File

660769571
4IN KNIFE SMOOTH: RNCC: 3 | RNVC: 2

26 Sep 1974

5110-22-609-4445
Hand Metal Cutting Shears

226094445
0885 20 01: RNCC: 3 | RNVC: 2

26 Jan 2005

5110-12-130-0496
Rectangular Cutting Punch

121300496
148D8: RNCC: 3 | RNVC: 2

30 May 1969

5110-15-125-7428
Cesoia

151257428
1204C: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-606-6357
Tabbing Tool

996066357
PE3448: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-14-321-0706

5110-14-400-6873
Tube Decoupe Joint

144006873
DEC0UPE J0INT LISSE 40MM: RNCC: 3 | RNVC: 2

8 May 1985

5110-12-167-8281
Hand File Set

121678281
8728: RNCC: 3 | RNVC: 2
H872800: RNCC: 3 | RNVC: 9
677191: RNCC: 5 | RNVC: 9

24 Jan 1977

5110-15-184-7597
Raschietto

151847597
3ZANBZSCN70X280: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-910-4201
Hand Cold Chisel

999104201
DEFSTAN51-11PT29: RNCC: 4 | RNVC: 1
BS3066-TABLE 3: RNCC: 4 | RNVC: 1
FA11260: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-885-2048
Hand File

218852048
39-GP-53: RNCC: 4 | RNVC: 1

2 Jun 1981

5110-12-309-2042
Hand Metal Cutting Shears

123092042
45: RNCC: 3 | RNVC: 9
250A-11-1106: RNCC: 5 | RNVC: 2
76300-215: RNCC: 5 | RNVC: 9
250A-11-1106: RNCC: 5 | RNVC: 9
44: RNCC: 5 | RNVC: 9
76300-215: RNCC: 5 | RNVC: 9
2725FR: RNCC: 5 | RNVC: 9

22 Dec 1986

5110-12-122-2567
Hand Reamer

121222567
6SPIRALGENUTET: RNCC: 3 | RNVC: 2

30 May 1969

5110-27-010-6556
Hand File

270106556
99999-NIIN-DA0037267: RNCC: 2 | RNVC: 1

21 Jun 2002

5110-14-378-2693
End Cutting Nippers

143782693
E73-110-160IS0LE: RNCC: 2 | RNVC: 2
187-16P0-PVC: RNCC: 3 | RNVC: 2

20 Jul 1982

5110-12-126-1451
Hand Reamer

121261451
NO PRIMARY REF 12-126-1451: RNCC: 3 | RNVC: 2
14DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-131-7010
Reamer Blade Set

121317010
131.21.400: RNCC: 3 | RNVC: 2
131-21-400: RNCC: 5 | RNVC: 2
700-17HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-25-112-5576

5110-12-331-7054
Cutting Punch Insert

123317054
53831011: RNCC: 3 | RNVC: 2

9 Jun 1993

5110-66-013-5558
Hand File

660135558
915991: RNCC: 3 | RNVC: 2
THREESQUAREFILE: RNCC: 5 | RNVC: 9

2 May 2002

5110-25-140-4580
Preforming Tang

5110-99-122-4558

5110-12-365-1760
Hand Cable Stripper

123651760
TRIM-114-C06: RNCC: 3 | RNVC: 2

3 Dec 2004

5110-15-220-4402
Taglierina

152204402
TAGLIERINA: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-4862
Cesoia Taglia Fili

152084862
4KSPMVCN: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-19-001-6881
Hand Hacksaw Blade

190016881
KS 1218: RNCC: 3 | RNVC: 2

29 Jun 2006

5110-21-639-5804
Hand Metal Stamping Die Set

216395804
1550: RNCC: 3 | RNVC: 1

29 Aug 1964

5110-15-230-0207
Lima Piatta 10"

152300207
02M: RNCC: 3 | RNVC: 2
511015E005673: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-99-297-6524
File Handle

992976524
NO PRIMARY REF 99-297-6524: RNCC: 3 | RNVC: 2
9-486-10-10: RNCC: 5 | RNVC: 2
7311518193478: RNCC: 5 | RNVC: 2
020AD-016: RNCC: 6 | RNVC: 9
9-486-10-10: RNCC: 6 | RNVC: 9

30 Jan 2002

5110-37-509-1622
Hand File

375091622
KS-B-3151,ÆÒÇÜ 3 °¡´Â³¯: RNCC: 2 | RNVC: 2

23 Aug 2002

5110-12-126-1345
Block Plane

121261345
DIN7220-48: RNCC: 2 | RNVC: 2
104S/48: RNCC: 3 | RNVC: 2
EMM104S/48: RNCC: 5 | RNVC: 2
48DIN7220: RNCC: 5 | RNVC: 2
HW3-48: RNCC: 5 | RNVC: 9
652A103-48: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-604-1982
Tube Cutter Cutting Wheel

226041982
33190: RNCC: 3 | RNVC: 2
4327542190: RNCC: 3 | RNVC: 2
VVT 4327542190: RNCC: 3 | RNVC: 2
01009569133190: RNCC: 5 | RNVC: 2

27 Jun 2003

5110-21-105-2497

5110-21-801-0514

5110-21-104-9594

5110-12-334-5874
Wire Stripper Blade

123345874
05L7991: RNCC: 3 | RNVC: 2

26 May 1994

5110-12-370-9839
Craftsman's Knife

123709839
2-127: RNCC: 3 | RNVC: 2

23 Jan 2007

5110-25-119-6497

5110-12-330-8192
Hand Reamer

123308192
DIN9-A25: RNCC: 2 | RNVC: 2
A25DIN9: RNCC: 5 | RNVC: 2

11 Feb 1993

5110-66-149-2322
Straight Trimmers Shears

661492322
NO PRIMARY REF 66-149-2322: RNCC: 3 | RNVC: 2
86536963: RNCC: 5 | RNVC: 2

24 Mar 2003

5110-99-645-0693
Hand Reamer

996450693
WD01-10-90013WWS66A: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-21-637-5283
Hand Reamer

216375283
B94-2: RNCC: 3 | RNVC: 1
B174-2: RNCC: 3 | RNVC: 1
50-10937: RNCC: 3 | RNVC: 2
GGGR180: RNCC: 4 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1
4500 13-32: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-17-031-3972
Monteursmes

170313972
NO PRIMARY REF 17-031-3972: RNCC: 3 | RNVC: 2
04-1901: RNCC: 5 | RNVC: 9

23 Dec 1967

5110-14-310-4965
Poincon Decoupage

143104965
568-4-6: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-99-456-2158

5110-14-407-8680

5110-98-851-7359

5110-27-011-3975
Hand File

270113975
99999-NIIN-DA0037151: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-14-332-0115
Diagonal Cutting Pliers

143320115
5454-14: RNCC: 3 | RNVC: 2
1190-14B0: RNCC: 5 | RNVC: 2

2 Jul 1975

5110-98-106-5678
Quick Unpick

981065678
112R: RNCC: 3 | RNVC: 2
3ANZ103: RNCC: 6 | RNVC: 9
3ANZ103: RNCC: 6 | RNVC: 9

1 Oct 1980

5110-33-103-9406
Diagonal Cutting Pliers

331039406
710.910/V: RNCC: 3 | RNVC: 2

23 Jun 1995

5110-33-203-3970
Tube Cutter Cutting Wheel

332033970
8621.00350: RNCC: 3 | RNVC: 2

1 Apr 2004

5110-99-608-6249

5110-99-399-7585

5110-15-192-5004
Serie Chiavi Combin

151925004
420070: RNCC: 3 | RNVC: 2
(241)AJ236420070: RNCC: 5 | RNVC: 2

22 Mar 2010

5110-15-161-7783
Forbici Curve Usag

151617783
FORBICI CURVE USAG MOD.FREC: RNCC: 3 | RNVC: 2

1 Oct 2000

5110-25-100-4301
Hand Hacksaw Frame

251004301
NO PRIMARY REF25-100-4301: RNCC: 3 | RNVC: 2
41-3714-300-120: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-99-910-6483
Hand Metal Stamping Die

999106483
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 5 | RNVC: 9
DL9A-H2636: RNCC: 5 | RNVC: 9
H2636: RNCC: 6 | RNVC: 9
H2636: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-122-2489
Hand Reamer

121222489
105.30.000: RNCC: 3 | RNVC: 2
105-30-000: RNCC: 5 | RNVC: 2
L0SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-27-014-8945
Hand Reamer

270148945
3455ATF16450: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-21-105-1333
Turning And Pivoting Graver Set

211051333
36-800-1: RNCC: 3 | RNVC: 2
2352: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-99-764-3978

5110-66-149-7462
Hand File

661497462
NO PRIMARY REF 66-149-7462: RNCC: 3 | RNVC: 2
07095209: RNCC: 5 | RNVC: 2

8 Apr 2003

5110-14-325-4237

5110-13-109-0122
Hand Reamer

131090122
3055070000: RNCC: 3 | RNVC: 2
3052004424: RNCC: 5 | RNVC: 2
OREA507: RNCC: 5 | RNVC: 2

1 Apr 1975

5110-15-208-5369
Sega

152085369
3NANLESAINNP600: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-13-102-8904
Hand Reamer

131028904
NBN485H8-8-5CS: RNCC: 2 | RNVC: 2

1 Apr 1975

5110-99-910-5180
And B Broach Handle

999105180
NO PRIMARY REF 99-910-5180: RNCC: 3 | RNVC: 2
H5736: RNCC: 5 | RNVC: 2
FA143664: RNCC: 6 | RNVC: 9
1A4065: RNCC: 6 | RNVC: 9

23 Sep 1982

5110-14-256-8837
Single Bow Cutting Punch

142568837
NO PRIMARY REF14-256-8837: RNCC: 3 | RNVC: 2
375-20: RNCC: 5 | RNVC: 2
251A20: RNCC: 5 | RNVC: 2
2216-20: RNCC: 5 | RNVC: 9

1 Jan 1969

5110-41-001-2946
Pliers

410012946
7325-011: RNCC: 3 | RNVC: 2

9 Feb 2010

5110-12-155-8247
Hand Cold Chisel

121558247
NO PRIMARY REF 12-155-8247: RNCC: 3 | RNVC: 2
107523: RNCC: 5 | RNVC: 9
3656-250: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-177-5806
Rectangular Cutting Punch

121775806
6886-28X5: RNCC: 3 | RNVC: 9
3916-28X5: RNCC: 5 | RNVC: 9

7 Feb 1979

5110-22-180-1867

5110-25-101-9338
Singl Cutting Punch

5110-25-103-3361

5110-25-103-5054

5110-99-135-7188

5110-66-098-3142
Hand Round Nose Chisel

660983142
805: RNCC: 3 | RNVC: 2

22 Aug 1978

5110-14-300-3832

5110-15-208-4579
Alesatore

152084579
3AANFCFMEQ14-25: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-135-2991
Hand Reamer

121352991
838-59: RNCC: 3 | RNVC: 2
513G003-59: RNCC: 3 | RNVC: 2

30 May 1969

5110-14-540-8478
Tube Cutter

145408478
2103 00: RNCC: 3 | RNVC: 2

23 Apr 2004

5110-27-019-4594
Hand File

270194594
10091KEGE0094: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-12-122-2539
Hand Reamer

121222539
513A103SS15-16: RNCC: 3 | RNVC: 2

30 May 1969

5110-17-001-8777
Cpl Bouten Schaar

170018777
DL5110-17-001-8777: RNCC: 3 | RNVC: 2

11 Mar 1992

5110-99-910-4982
Hand File

999104982
C00RDPATH4007: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
FA13421: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-4224
Firmer Chisel

999104224
DEFSTAN51-11 PART 27: RNCC: 4 | RNVC: 1
H409: RNCC: 5 | RNVC: 9
FA11287: RNCC: 6 | RNVC: 9
H409: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-812-3786

5110-21-876-3025
Ice Borin Auger Kit

218763025
F4041: RNCC: 3 | RNVC: 2
5133-8714: RNCC: 5 | RNVC: 2

27 Sep 1977

5110-66-017-5173
Hand Rasp

660175173
RASP,HAND 10IN.: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-15-190-9003
Matrice Esagonale

151909003
9780: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-21-883-1884
Hand File

218831884
39GP30: RNCC: 4 | RNVC: 1

24 Feb 1981

5110-21-801-0511

5110-13-112-2012
Steel Strapping Cutter

131122012
134005: RNCC: 3 | RNVC: 2

2 Aug 1983

5110-15-215-4024
Inserto Esagonale

152154024
390CE008: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-802-5868

5110-22-222-6739
Hand File

222226739
210-4MGR: RNCC: 3 | RNVC: 2
OEBERG 210: RNCC: 5 | RNVC: 2
FIL: RNCC: 5 | RNVC: 9
72-0626-4: RNCC: 6 | RNVC: 9

11 Mar 1981

5110-15-221-8321
Pinza A Crimpare Pe

152218321
PINZACRIMPAREXCONNETTORIBNC: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-183-4169
Scalpelli Serie 6 P

151834169
USAG ART.351/6: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-27-052-0027
Maket Bicak

270520027
SK-5: RNCC: 2 | RNVC: 1

13 Dec 2010

5110-15-136-4042
Archetto Per Seghet

151364042
2795-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-25-102-3841
Hand File

5110-21-639-5596

5110-25-143-1558

5110-33-005-4431
Screw Thread Insert Breaker

330054431
463.636: RNCC: 3 | RNVC: 2

25 Jul 2001

5110-99-428-7273

5110-99-552-1681

5110-98-105-7190
Hand Reamer Set

981057190
NZCES 321: RNCC: 3 | RNVC: 2

19 Dec 1977

5110-14-322-1053
Bras Cisaille Teles

143221053
NO PRIMARY REF14-322-1053: RNCC: 3 | RNVC: 2
CH69-10-2: RNCC: 5 | RNVC: 9

1 Jan 1975

5110-66-013-9881
Hand File

660139881
909212: RNCC: 3 | RNVC: 2
MILLSAWFILE: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-14-420-1027
Couteau Fixe

144201027
8814726115: RNCC: 3 | RNVC: 2

18 Nov 1987

5110-98-200-5771
Hand File

982005771
3700708: RNCC: 3 | RNVC: 2

26 Sep 1986

5110-22-270-3510

5110-66-113-5243

5110-99-136-9344
Hand Boilermaker's Chisel

991369344
32871-504-2: RNCC: 3 | RNVC: 2
32871-504: RNCC: 5 | RNVC: 2
44939: RNCC: 5 | RNVC: 2
H474-285596: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-488-6722
File Handle

994886722
NO PRIMARY REF 99-488-6722: RNCC: 3 | RNVC: 2
7311518193362: RNCC: 5 | RNVC: 2
9-485-09-1P: RNCC: 5 | RNVC: 2
020AO-006: RNCC: 6 | RNVC: 9

30 Jan 2002

5110-99-910-5685
Hollo Cutting Punch

999105685
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 5 | RNVC: 9
DL9A-H2044: RNCC: 5 | RNVC: 9
H2044: RNCC: 6 | RNVC: 9
F1FA16090: RNCC: 6 | RNVC: 9
1B3009: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-17-015-5878
Hand File

170155878
TE9WTV1-7-4-54: RNCC: 3 | RNVC: 2
TE9WTV1BYL7-4INCH: RNCC: 3 | RNVC: 2

17 Jun 1972

5110-15-191-6816
Lima Con Manico Mez

151916816
2601/1: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-137-9521
Tronchese A Taglio

151379521
1082015: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-98-205-8798
Hand File

982058798
LP1850-3-3: RNCC: 3 | RNVC: 2

12 May 2003

5110-66-154-1331
Craftsman's Knife

661541331
K-22V: RNCC: 3 | RNVC: 2
00006562: RNCC: 5 | RNVC: 2

1 Mar 2006

5110-25-100-4309
Metal Cuttin Shears

5110-25-100-4287
Hand Hacksaw Blade

5110-22-302-9005

5110-22-270-5397

5110-22-302-8752

5110-25-100-4288
Hand Hacksaw Blade

5110-15-218-0964
Levacoppiglie

152180964
3ASN: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-124-2986
Serie Punzoni 27Let

151242986
SERIEPUNZONIMM4LETTERENUMERI: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-271-0471
Hand Reamer

992710471
A05070DA: RNCC: 3 | RNVC: 2
A05070DAP: RNCC: 5 | RNVC: 2
1MEVDTJ: RNCC: 6 | RNVC: 9

1 Apr 2003

5110-14-244-3651

5110-98-105-8739
Hand Reamer

981058739
NO PRIMARY REF 98-105-8739: RNCC: 3 | RNVC: 2
METRIC 2003-2.2MM: RNCC: 5 | RNVC: 2

30 May 1978

5110-21-849-8245
Hand File

218498245
39GP53: RNCC: 4 | RNVC: 1
5110-0692: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-99-136-2054
Surform Plane Blade

991362054
NO PRIMARY REF 99-136-2054: RNCC: 3 | RNVC: 2
H6822: RNCC: 5 | RNVC: 2
0-21-508: RNCC: 5 | RNVC: 2
508: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-99-556-2520

5110-15-208-4742
Alesatore

152084742
3AARFCFRDP11: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-448-4401

5110-66-150-3298
Diagonal Cutting Pliers

661503298
NO PRIMARY REF 66-150-3298: RNCC: 3 | RNVC: 2
07203606: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-14-287-2314
Diagonal Cutting Pliers

142872314
232-16-G: RNCC: 3 | RNVC: 2
232-16G: RNCC: 3 | RNVC: 2
3272670289901: RNCC: 5 | RNVC: 2
THX91-6S: RNCC: 5 | RNVC: 2
3599071: RNCC: 5 | RNVC: 2
85-581-1992: RNCC: 6 | RNVC: 9

1 Jan 1972

5110-12-170-4609
Hand Reamer

121704609
DIN 206-B 4HSS: RNCC: 2 | RNVC: 9
DIN206-B-4-HSS: RNCC: 2 | RNVC: 9
11602HSS4: RNCC: 3 | RNVC: 9
536C4: RNCC: 3 | RNVC: 9
513A201HSS4SPIRALGENUTET: RNCC: 3 | RNVC: 9
334-4: RNCC: 5 | RNVC: 9
B4DIN206HSS: RNCC: 5 | RNVC: 9

14 Jul 1977

5110-22-303-5298

5110-99-204-5589

5110-66-025-5779
Firmer Chisel

660255779
D1737: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-21-868-0950

5110-12-316-9108
Hand Metal Cutting Shears

123169108
2704A: RNCC: 3 | RNVC: 2
106696: RNCC: 5 | RNVC: 2

22 Feb 1989

5110-27-019-8365
Hand Cape Chisel

270198365
10091KISK0003: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-199-1003
Tenaglia Per Ferrai

151991003
1905/1-200: RNCC: 3 | RNVC: 2
B1905/1-200: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-27-014-9036
Single Bow Cutting Punch

270149036
5120ATFD0469: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-27-025-2208
Chisel And Gouge Handle

270252208
51205000601: RNCC: 2 | RNVC: 1

4 Feb 2005

5110-27-019-2840
Hand File

270192840
10131ME1024: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-488-5550
End Cutting Nippers

144885550
190.16EG: RNCC: 3 | RNVC: 2
3148511439302: RNCC: 5 | RNVC: 2
0143930: RNCC: 5 | RNVC: 2
190-16EG: RNCC: 5 | RNVC: 2

21 May 1997

5110-15-233-4365
Raschiavetro

152334365
44045-10/4: RNCC: 3 | RNVC: 2
511015E098272: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-12-387-1708
Hand Cable Stripper

123871708
50050450: RNCC: 3 | RNVC: 2
4024596000240: RNCC: 5 | RNVC: 2

11 Nov 2011

5110-15-209-7709
Miniseghetto Stanle

152097709
040843.5: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-942-0283

5110-15-192-1625
Riduttori Chiavi E

151921625
120320: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-66-134-5752
Hand File Set

661345752
12356: RNCC: 3 | RNVC: 2
2-470-16-2-0: RNCC: 3 | RNVC: 2
00087550: RNCC: 5 | RNVC: 2

2 Dec 1991

5110-25-100-4137

5110-99-120-0921
Masonry Drill Drift

991200921
H5386: RNCC: 2 | RNVC: 2
FA15436: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-851-4398
Punch And Die Punch

218514398
XX: RNCC: 3 | RNVC: 1
300000063: RNCC: 3 | RNVC: 2

6 Oct 1968

5110-25-122-8364
End Cutting Nippers

5110-99-614-3033
Hand Reamer

996143033
WG1303-2182-041-043WR66B: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-32-082-7273
Bolt Cutter

320827273
DSTA-LS/GE/K/0028A: RNCC: 4 | RNVC: 1

18 Aug 2008

5110-99-423-8744

5110-15-219-9573
Coltello Multiuso C

152199573
COLTELLO E 11 ACCESSORI: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-125-7449
Pinza Tagliamarmitt

151257449
4764: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-140-1404

5110-21-859-4126
Chisel And Gouge Handle

218594126
13-13781: RNCC: 3 | RNVC: 2

13 Aug 1970

5110-15-208-4672
Fustella Per Guarni

152084672
3FANGRF038: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-13-111-1493
Scraper Regulator

131111493
3050710008: RNCC: 3 | RNVC: 2
3052001824: RNCC: 5 | RNVC: 2

29 May 1979

5110-14-225-3980

5110-12-374-9169
Hand Cable Stripper

123749169
40010: RNCC: 3 | RNVC: 2
PWS-001: RNCC: 5 | RNVC: 2

7 Apr 2008

5110-12-130-9608
Ven Schneideinsatz

121309608
21661130: RNCC: 3 | RNVC: 2
216.61.130: RNCC: 5 | RNVC: 2
000589086905: RNCC: 5 | RNVC: 9
200-9: RNCC: 5 | RNVC: 9
200-9VD1-2B: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-899-4779
Dimpling Die

218994779
ZT2053-3/16: RNCC: 3 | RNVC: 2
ZT2053-3-16: RNCC: 5 | RNVC: 2

8 Aug 1985

5110-66-013-4354
Hand File

660134354
937954: RNCC: 3 | RNVC: 2
2132 162: RNCC: 3 | RNVC: 2
2-302-16-2-0: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-21-814-1233
Die Dimpling Body

218141233
ZT186301-#8: RNCC: 3 | RNVC: 2
ZT186301-8: RNCC: 5 | RNVC: 2

13 Jun 1964

5110-66-150-3782
Firmer Chisel

661503782
NO PRIMARY REF 66-150-3782: RNCC: 3 | RNVC: 2
07119208: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-12-126-1558
Single Bit Ax Handle

121261558
DIN7295-A700: RNCC: 2 | RNVC: 2
A700DIN7295: RNCC: 5 | RNVC: 2
DIN7295A700: RNCC: 5 | RNVC: 9
700DIN7295: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-396-5912
Saw Blade

993965912
TL-502-984: RNCC: 3 | RNVC: 2
TL-502-984: RNCC: 3 | RNVC: 9

25 Sep 2008

5110-25-103-9152

5110-25-103-9175

5110-27-055-9678
Hand File

270559678
ESAS RF 08: RNCC: 2 | RNVC: 1
RF 08: RNCC: 2 | RNVC: 1

18 Jan 2012

5110-14-552-0144
Hand Cold Chisel Set

145520144
263.GJ4: RNCC: 3 | RNVC: 2
3148511616505: RNCC: 3 | RNVC: 2
263.GJ4: RNCC: 5 | RNVC: 2

20 Nov 2006

5110-12-318-2711
Isolierungs Halter

123182711
VR: RNCC: 3 | RNVC: 2
2520: RNCC: 5 | RNVC: 2
VR: RNCC: 5 | RNVC: 2
2520: RNCC: 5 | RNVC: 2

26 Jun 1989

5110-66-064-4878
Hand File

660644878
4 1-2SLIMTAPERSEC0NDCUT: RNCC: 3 | RNVC: 2

10 Jan 1974

5110-21-909-0561
Diagonal Cutting Pliers

219090561
C5734200: RNCC: 3 | RNVC: 2

4 Dec 1991

5110-15-000-2090
Axe

150002090
751110 600: RNCC: 3 | RNVC: 2
600: RNCC: 3 | RNVC: 9

8 Feb 2013

5110-12-313-3566
Reamer Blade Set

123133566
100.13.400: RNCC: 3 | RNVC: 2

24 Mar 1988

5110-15-187-3019
Pipe Cutter

151873019
UZ632: RNCC: 3 | RNVC: 2
(241)A9410UZ632: RNCC: 5 | RNVC: 2

11 Mar 2009

5110-14-414-2775
Crayon Denudeur-Tor

144142775
AV 25: RNCC: 3 | RNVC: 2

28 Jan 1987

5110-27-011-7703
Hand Reamer

270117703
09013KR1005: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-22-606-7540
Rip Hand Saw

226067540
8765141: RNCC: 3 | RNVC: 2

23 Mar 2004

5110-15-165-3849
Lima Per Meccanica

151653849
2564112: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-331-1751

5110-99-608-7676

5110-12-309-0763
Hand File

123090763
2152161: RNCC: 3 | RNVC: 2
2402-160-1: RNCC: 3 | RNVC: 2
2-304-16-1-0: RNCC: 3 | RNVC: 2
2152-160-1: RNCC: 5 | RNVC: 2

11 Dec 1986

5110-21-808-5098
Adz

218085098
HD-564: RNCC: 3 | RNVC: 2
12T: RNCC: 5 | RNVC: 2
A7-34T: RNCC: 5 | RNVC: 9
AT34T: RNCC: 5 | RNVC: 9

20 Mar 1964

5110-21-899-4766
Pulling Bar

218994766
ZT2052-1/4: RNCC: 3 | RNVC: 2
ZT2052-1-4: RNCC: 5 | RNVC: 2

6 Aug 1985

5110-12-140-1493
Reamer Blade Set

121401493
101.11.400: RNCC: 3 | RNVC: 2
101-11-400: RNCC: 5 | RNVC: 2
800-18HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-57-441-1248
Hand File

574411248
2821-0062 GOST 1465-80: RNCC: 2 | RNVC: 2
2821-0062 GOST 1465-80: RNCC: 3 | RNVC: 2
2821-0062 GOST 1465-80: RNCC: 3 | RNVC: 2

8 Nov 2012

5110-99-910-4218
Firmer Chisel

999104218
DEF STAN 51-11:PART 27: RNCC: 4 | RNVC: 1
BS1943: RNCC: 4 | RNVC: 1
TABLE1A: RNCC: 6 | RNVC: 9
FA11281: RNCC: 6 | RNVC: 9
H403: RNCC: 6 | RNVC: 9
1A384: RNCC: 6 | RNVC: 9
BS1943-TABLE1A: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-25-104-8246
Nuten Meissel

5110-25-103-8640
Doubl Cutting Punch

5110-27-014-8932
Hand Reamer

270148932
3455ATF16417: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-33-208-1678
Hand Metal Cutting Shears

332081678
913.028: RNCC: 3 | RNVC: 2

12 Mar 2010

5110-13-119-5417
Hand Bull Point Chisel

131195417
00.06.81.02: RNCC: 3 | RNVC: 2

17 Oct 2006

5110-23-111-4658
File Handle

231114658
13151680350069: RNCC: 3 | RNVC: 2

18 Jun 1991

5110-14-451-4030
Casse Ecrous

144514030
289C1: RNCC: 3 | RNVC: 2

18 Nov 1991

5110-99-433-4715

5110-99-433-4748

5110-99-433-4732

5110-21-849-7990
Hand Reamer

218497990
937KE: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-208-4993
Scalp. Da Fabb. Ad

152084993
3SANMMPUZ200X6: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-25-123-2094
Hand Metal Cutting Shears

251232094
122A: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-17-701-5849
Back Saw

177015849
117X4300: RNCC: 3 | RNVC: 2

14 May 1970

5110-66-010-9109
Single Bow Cutting Punch

660109109
HP708: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-15-176-4608
Lama Di Ricambio Pe

151764608
5232GT: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-208-4570
Alesatore Fisso Cil

152084570
3AARFCFMEQ4: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-139-9728
Pialletto Piccolo C

151399728
C9/482: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-14-484-8706
Rigid Handle Machete

144848706
SABRE D'AB.FIXE AVEC ETUI.76800: RNCC: 3 | RNVC: 2
0-76800-00000-71: RNCC: 3 | RNVC: 2
SABRE D'AB.FIXE AVEC ETUI 76800: RNCC: 5 | RNVC: 9

12 Dec 1996

5110-15-144-3471
Scalpello Per Legno

151443471
5209G12: RNCC: 3 | RNVC: 2
6055-1-12: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-25-134-2143
Lomme Sag

251342143
DIAMANTTRAAD M/2 BOEYLEHAANDTAK: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-17-115-2916
Hand File Set

171152916
HBF100NSCM55719: RNCC: 3 | RNVC: 2
HBF100: RNCC: 5 | RNVC: 2
5110-01-430-5214: RNCC: 6 | RNVC: 9

26 Nov 2002

5110-21-114-2812

5110-14-310-4978
Poincon De Rabattag

143104978
568-7-9: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-165-3989
Mecchia X Trapano E

151653989
4509G16: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-186-2974
Scalpello Te-Y-Kfm

151862974
2043370: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-21-840-0431
Knockout Punch And Die

218400431
733: RNCC: 3 | RNVC: 1

28 Apr 1965

5110-15-216-0144
Bucking Bars

152160144
626AT: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-617-9861
Tube Cutter

226179861
RCMT 10T3MO-SM H13A: RNCC: 3 | RNVC: 2

25 Sep 2008

5110-15-123-2828
Chiave A Settore Co

151232828
1130-45-50: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-274-7997
Hand Metal Stamping Die Set

142747997
DELA.3230.06: RNCC: 3 | RNVC: 2
4650-6: RNCC: 3 | RNVC: 9
342-01-6: RNCC: 5 | RNVC: 9
91LETTRES6: RNCC: 5 | RNVC: 9
3230-6: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-22-609-3709
Hand Reamer

226093709
501A-5-16: RNCC: 3 | RNVC: 2

19 Jan 2005

5110-14-275-8958
A Monture Scie

142758958
NO PRIMARY REF14-275-8958: RNCC: 3 | RNVC: 2
258LI0N80-40: RNCC: 5 | RNVC: 2
4560-80METALLIQ: RNCC: 5 | RNVC: 9
258LI0N80-40: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-99-456-2358
Hand Saw Swage

994562358
NO PRIMARY REF 99-456-2358: RNCC: 3 | RNVC: 2
F1FA17956: RNCC: 5 | RNVC: 2

3 Oct 1978

5110-66-017-2224
Hollow Punch

660172224
1900 3-16IN: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-22-112-6213

5110-22-102-0095

5110-27-000-8051
Single Bow Cutting Punch

270008051
5700 24 0012: RNCC: 3 | RNVC: 2

11 Jun 1991

5110-15-220-3462
Tranciacavo Oleodin

152203462
HT-TC085: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-607-3746
Hand File

226073746
1-100-12-2-0: RNCC: 3 | RNVC: 2
8019136: RNCC: 3 | RNVC: 2

11 Jun 2004

5110-15-217-6664
Spazzola Di Ferro 4

152176664
SPAZZOLAFERRO4RANGHI: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-010-9111
Single Bow Cutting Punch

660109111
27175: RNCC: 3 | RNVC: 2
07235001: RNCC: 5 | RNVC: 2
2869-5: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-17-010-4180
Woodworking Butt Chisel

170104180
1172.12: RNCC: 3 | RNVC: 2
3010: RNCC: 5 | RNVC: 9
3010 1-2: RNCC: 5 | RNVC: 9

15 May 1970

5110-21-639-4889
Hand File

216394889
39GP53: RNCC: 4 | RNVC: 1

2 Sep 1964

5110-33-210-3333
Hand File

332103333
2132: RNCC: 3 | RNVC: 2

3 Aug 2012

5110-15-172-7179
Spingipezzuola 12 M

151727179
SPINGIPEZZUOLA 12 MM.KLEEN BORE: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-14-244-0897

5110-25-125-3040
Ski Skrape

5110-25-114-2920

5110-25-121-3825

5110-12-374-6269
Diagonal Cutting Pliers

123746269
66025160-TCS: RNCC: 3 | RNVC: 2

3 Mar 2008

5110-99-744-5727
Hand Wire Str Blade

997445727
45-1611-1 (MOD): RNCC: 3 | RNVC: 2
45-1611-1 (MOD): RNCC: 6 | RNVC: 9
1H1144: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-120-8014
Hand Wire Stripper

991208014
BS3087-PART 7: RNCC: 4 | RNVC: 1
H35/1: RNCC: 5 | RNVC: 2
H6265: RNCC: 6 | RNVC: 9
DEFSTAN51-10: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
DL9A-H6265: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-4852
Hand File

999104852
DEF1098: RNCC: 4 | RNVC: 1
H20134: RNCC: 5 | RNVC: 2
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
1A901: RNCC: 6 | RNVC: 9
9104852: RNCC: 6 | RNVC: 9
F1FA13321: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-105-0706

5110-21-105-0099

5110-99-465-3622
Sheet Metal Punch

994653622
1B5561: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-12-122-2540
Hand Reamer

121222540
513A103SS1: RNCC: 3 | RNVC: 2

30 May 1969

5110-12-122-2525
Hand Reamer

121222525
513A103SS35-64: RNCC: 3 | RNVC: 2

30 May 1969

5110-21-637-7568

5110-21-639-5134

5110-21-639-6547

5110-12-130-2777
Oelnut Schaber

121302777
NO PRIMARY REF 12-130-2777: RNCC: 3 | RNVC: 2
575A202: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-208-3798
Alesatore

152083798
3AAXFCFRDP9-25: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-910-4939
Hand File

999104939
DEF1098: RNCC: 4 | RNVC: 1
H20963: RNCC: 5 | RNVC: 2
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
FA13571: RNCC: 6 | RNVC: 9
9104939: RNCC: 6 | RNVC: 9
1A930: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-559-7481
Hand File

145597481
90-122: RNCC: 3 | RNVC: 2
694 510 441 006: RNCC: 6 | RNVC: 9

12 Feb 2009

5110-99-942-0135

5110-99-942-0185

5110-22-123-5322
End Cutting Nippers

221235322
2212B: RNCC: 3 | RNVC: 2

10 Jan 1995

5110-21-637-4333
Hand Masonry Drill

216374333
800: RNCC: 3 | RNVC: 1
1245-18: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-220-5709
Cacciavite Isolato

152205709
1/5X8: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-611-8298

5110-99-611-8303

5110-99-466-9237

5110-15-197-0926
Spokeshave

151970926
PN UAS 00018326: RNCC: 3 | RNVC: 2
5110F76026266: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-123-6233
Coltelli Universali

151236233
5233GE: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-363-3866
Hand Wire Stripper

123633866
691501: RNCC: 3 | RNVC: 2

5 Jun 2004

5110-99-433-4704

5110-99-432-8900

5110-98-105-8768

5110-25-102-4459
Crosscut Hand Saw

5110-25-102-3797

5110-15-190-3990
Pialletto

151903990
5PLECHSE225X58: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-14-293-2530
Hand Leather Stamping Die

142932530
NT92-01JUIN51P0INC0N8-8MM: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-293-2530: RNCC: 3 | RNVC: 2
NT92-01JUIN51P0INC0N8-8MM: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-25-100-0922
Diagonal Cutting Pliers

251000922
8316-5 3-4: RNCC: 3 | RNVC: 1
2676: RNCC: 3 | RNVC: 2
8316-5 3-4N: RNCC: 3 | RNVC: 2
75094001: RNCC: 3 | RNVC: 2
8316-5 3-4C: RNCC: 3 | RNVC: 2
1802-1: RNCC: 3 | RNVC: 2
10580-5 3-4CP: RNCC: 5 | RNVC: 2
2 0000-954: RNCC: 5 | RNVC: 2
N6R7532: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-66-013-4353
Hand File

660134353
FF244F: RNCC: 3 | RNVC: 2
937591: RNCC: 3 | RNVC: 2
735-049249: RNCC: 3 | RNVC: 2
2132 142: RNCC: 3 | RNVC: 2
AIGTRI140T2: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-22-221-3902
Hand File

222213902
307-16-1: RNCC: 3 | RNVC: 2
OEBERG 307-16-1: RNCC: 5 | RNVC: 2
FIL: RNCC: 5 | RNVC: 9

13 Dec 1972

5110-15-123-7687
I Stampi Traforati

151237687
3679-1-15: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-22-620-3754
Single Bit Ax

226203754
8123819: RNCC: 3 | RNVC: 2
FGS-1.6-810: RNCC: 5 | RNVC: 2

24 Feb 2010

5110-12-305-0050
Hand Belt Cutter

123050050
G-8400-TYP II: RNCC: 3 | RNVC: 2
G8400: RNCC: 5 | RNVC: 9

16 Sep 1985

5110-99-402-0745

5110-99-422-5468

5110-99-433-4724

5110-99-726-8466
Wire Cutter Tube

997268466
8251559134: RNCC: 3 | RNVC: 2

15 Jul 2008

5110-25-102-1182

5110-25-100-0885

5110-25-101-5758

5110-12-173-8315
Tinner's Hollow Cutting Punch

121738315
632A203-10: RNCC: 3 | RNVC: 9

16 May 1978

5110-98-104-7455
Hand Cape Chisel

981047455
NO PRIMARY REF 98-104-7455: RNCC: 3 | RNVC: 2
1A910-4180: RNCC: 5 | RNVC: 2
229B: RNCC: 5 | RNVC: 2
5110-99-910-4180: RNCC: 6 | RNVC: 9

10 Dec 1973

5110-20-004-7174
Craftsman's Knife Set

200047174
57-5050-6: RNCC: 3 | RNVC: 2

1 Apr 2009

5110-15-208-5009
Scalpello

152085009
3SANMMPPZ175X24: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-4658
Fustella Per Guarni

152084658
3FANGRF024: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-172-3367
Pinza Regolabile Ra

151723367
PINZA REGOLABILE RAFRA PER TUBI: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-192-4952
Serie Filiera

151924952
FFFM95B: RNCC: 3 | RNVC: 2
(241)AJ236FFFM95B: RNCC: 5 | RNVC: 2

22 Mar 2010

5110-12-378-1859
Diagonal Cutting Pliers

123781859
76 05 125: RNCC: 3 | RNVC: 2
4003773005315: RNCC: 5 | RNVC: 2
7605125: RNCC: 5 | RNVC: 9

18 Mar 2009

5110-13-103-0056
Firmer Chisel

131030056
B325-326-6: RNCC: 3 | RNVC: 9

1 Apr 1975

5110-99-910-4251
Turning Chisel

999104251
DEF STAN 51-11:PART 27: RNCC: 4 | RNVC: 1
BS1943: RNCC: 4 | RNVC: 1
910-4251: RNCC: 6 | RNVC: 9
1C5262: RNCC: 6 | RNVC: 9
H437: RNCC: 6 | RNVC: 9
BS1943-TABLE 6: RNCC: 6 | RNVC: 9
TABLE 6: RNCC: 6 | RNVC: 9
WX12154: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-149-5107
Knife Blade

661495107
NO PRIMARY REF 66-149-5107: RNCC: 3 | RNVC: 2
L-500: RNCC: 5 | RNVC: 2

4 Apr 2003

5110-12-188-1858
Hand Rasp

121881858
DIN7263-D300-2: RNCC: 2 | RNVC: 2
19139-300-2: RNCC: 3 | RNVC: 2
3158302: RNCC: 3 | RNVC: 2
1558-300-2: RNCC: 3 | RNVC: 2
D300-2DIN7263: RNCC: 5 | RNVC: 2
D 300-2 DIN 7263: RNCC: 5 | RNVC: 9
DIN7263-D-300-2: RNCC: 5 | RNVC: 9
DIN7263D300-2: RNCC: 5 | RNVC: 9

11 Jun 1981

5110-17-701-4754
Hand Reamer

177014754
5-25H7DIN206SS: RNCC: 2 | RNVC: 1
586-5-25: RNCC: 3 | RNVC: 2
DIN206: RNCC: 4 | RNVC: 1

14 May 1970

5110-25-101-5237
Craftsman's Knife

251015237
FS 5110-0702 POS 2: RNCC: 2 | RNVC: 2
10100400U16-101: RNCC: 2 | RNVC: 2
211 9020: RNCC: 5 | RNVC: 2
211-9020: RNCC: 5 | RNVC: 2
41-5153-860-100: RNCC: 5 | RNVC: 2
3519682: RNCC: 5 | RNVC: 2
205712-3: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-12-342-8615
Diagonal Cutting Pliers

123428615
VDE 8314-160: RNCC: 3 | RNVC: 2
66007160: RNCC: 3 | RNVC: 2
4010886674369: RNCC: 5 | RNVC: 2
6743620: RNCC: 5 | RNVC: 2

10 Apr 1997

5110-12-378-4138
Hand Metal Stamping Die

123784138
PRAEGESATZ, OBERSTEMPEL DIENSTST: RNCC: 3 | RNVC: 2
7520-01208: RNCC: 6 | RNVC: 9

2 Apr 2009

5110-98-102-0155
Hand File

981020155
6IN.HALF ROUND SECOND CUT: RNCC: 3 | RNVC: 2
150MM HALF-RD 2ND CUT: RNCC: 3 | RNVC: 2
150MM HALF-RD 2ND CUT: RNCC: 5 | RNVC: 9
FA321R STUBS: RNCC: 6 | RNVC: 9

9 Aug 1979

5110-15-216-1713
6 5X0 Filiera Skf 3

152161713
SKF3-5X0-6: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-624-6877
Hand File

226246877
614: RNCC: 3 | RNVC: 2

10 Dec 2012

5110-14-571-2274
Diagonal Cutting Pliers

145712274
417.PMT: RNCC: 3 | RNVC: 2
FACOM 417.PMT: RNCC: 5 | RNVC: 2

1 Mar 2012

5110-21-105-2392

5110-21-104-9562

5110-21-105-0112

5110-98-204-1735
Pocket Knife

982041735
VICTORINOX VIP 1: RNCC: 3 | RNVC: 2

14 Dec 1993

5110-99-465-4025
Mortise Chisel

994654025
1A4650: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-22-606-0569
Back Saw

226060569
562014R: RNCC: 3 | RNVC: 2

8 Jan 2004

5110-21-848-0187
Mattock Head Ax

218480187
FA107: RNCC: 3 | RNVC: 2
P375: RNCC: 3 | RNVC: 2
PULASKIMATT0CKAXE: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-169-6646
Chiave Sett.

151696646
F72017675: RNCC: 3 | RNVC: 2

5 Nov 2002

5110-99-137-6835
Contact File Handle

991376835
15089: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-21-876-0203
Hand Metal Stamping Die Set

218760203
3591: RNCC: 3 | RNVC: 1
1568T16: RNCC: 3 | RNVC: 2

13 Apr 1977

Load More Results