What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 54 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 54of 112

5110-17-054-6040
Hand Hacksaw Blade

170546040
3805: RNCC: 3 | RNVC: 1
3805: RNCC: 5 | RNVC: 1

25 Aug 1983

5110-99-545-3328
Pipe Shearing Blade

5110-19-004-3522
Hand File

190043522
8AT-9105-10-3: RNCC: 3 | RNVC: 2

26 Jan 2011

5110-12-120-6125
Plane Cutter Bit

121206125
DIN5145-C48GLEICHDICK: RNCC: 2 | RNVC: 2
C48DIN5145GLEICHDICK: RNCC: 5 | RNVC: 2
DIN5145C48GLEICHDICK: RNCC: 5 | RNVC: 9
C48DIN5145: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-141-1696
Hand File

121411696
DIN7262-B150-2: RNCC: 2 | RNVC: 2
1237150: RNCC: 3 | RNVC: 2
1237-150-2: RNCC: 3 | RNVC: 2
1237-150-2: RNCC: 5 | RNVC: 2
B150-2DIN7262: RNCC: 5 | RNVC: 9
D150EINHIEB2DIN8336: RNCC: 5 | RNVC: 9
DIN7262B150-2: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-314-5078
Diagonal Cutting Pliers

123145078
9060/3-CPI: RNCC: 3 | RNVC: 2
9060-3CPI: RNCC: 5 | RNVC: 2

14 Jul 1988

5110-21-639-4327
Hand File

216394327
39GP30: RNCC: 4 | RNVC: 1
5110-0558: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-25-119-9597

5110-21-880-8458
Hand Wire Stripper

218808458
45-1706: RNCC: 3 | RNVC: 2

18 Dec 1979

5110-15-004-7134
Micro Stripper (Amp

150047134
MS1-08S-B5-FS: RNCC: 3 | RNVC: 2

9 Dec 2013

5110-12-148-6000
Reamer Blade Set

121486000
NO PRIMARY REF 12-148-6000: RNCC: 3 | RNVC: 2
101434: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-131-4357
Chisel And Gouge Handle

121314357
DIN5138-A150: RNCC: 2 | RNVC: 2
A150DIN5138: RNCC: 5 | RNVC: 2
89D: RNCC: 5 | RNVC: 9
DIN5138A150: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-807-1123

5110-21-807-1199

5110-21-849-7777
Hand File

218497777
5110-0607: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-99-814-5083
Pipe Cutter

998145083
NO PRIMARY REF 99-814-5083: RNCC: 3 | RNVC: 2
73796-85: RNCC: 5 | RNVC: 2
73796-85: RNCC: 5 | RNVC: 9

1 Jun 2011

5110-66-150-4681
File Handle

661504681
NO PRIMARY REF 66-150-4681: RNCC: 3 | RNVC: 2
00196384: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-22-606-4139
Knife Blade

226064139
841-788: RNCC: 3 | RNVC: 2

11 Feb 2004

5110-21-903-3044
Cutter

219033044
C0424-30: RNCC: 3 | RNVC: 2

4 Jan 1988

5110-17-015-5899
Hand File

170155899
TVA5110-2-263-005-1.1.30: RNCC: 3 | RNVC: 2
TVA5110-2-263-005: RNCC: 5 | RNVC: 1
12301001: RNCC: 5 | RNVC: 2
12301001 NICHOLSON: RNCC: 5 | RNVC: 2

17 Jun 1972

5110-22-621-3311
Hand Cable Stripper

16 Sep 2010

5110-15-123-3994
Tronchese Taglienti

151233994
086: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-165-3776
Forbice Per Elettri

151653776
2179: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-357-7516
Hand File

123577516
COR106-180MM-H2: RNCC: 3 | RNVC: 2
106-180-2: RNCC: 5 | RNVC: 2

18 Jul 2002

5110-15-136-2003
Punta Per Tracciare

151362003
4812-150: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-165-3956
Lima Quadra Con Man

151653956
2344G812D: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-185-5487
Tailor's Shears

121855487
DIN32612-210-ST: RNCC: 2 | RNVC: 2
1020/C-8IN: RNCC: 3 | RNVC: 2
210DIN32612ST: RNCC: 5 | RNVC: 2

14 Oct 1980

5110-21-870-2540
Lead Cutting Pliers

218702540
401A-30: RNCC: 3 | RNVC: 2
907L: RNCC: 5 | RNVC: 2
907.4: RNCC: 5 | RNVC: 2

4 Sep 1974

5110-21-639-4101
Hand File

216394101
39GP30: RNCC: 4 | RNVC: 1
5110-0487: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-66-114-1797
Edge Cutting Trimming Tool

661141797
707/546: RNCC: 3 | RNVC: 2

14 May 1982

5110-99-910-4250
Paring Chisel

999104250
DEFSTAN51-11 PART 27: RNCC: 4 | RNVC: 1
DL9A: RNCC: 5 | RNVC: 9
DL9A-H435: RNCC: 5 | RNVC: 9
H435: RNCC: 6 | RNVC: 9
FA11340: RNCC: 6 | RNVC: 9
H435: RNCC: 6 | RNVC: 9
1A2747: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-176-4651
Punta A Scalpello P

151764651
0715-94-153: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-66-149-8153
Hand Metal Cutting Shears

661498153
NO PRIMARY REF 66-149-8153: RNCC: 3 | RNVC: 2
09920615: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-13-119-5671
Rip Hand Saw

131195671
3090-20-XT11-HP: RNCC: 3 | RNVC: 2
7311518181369: RNCC: 5 | RNVC: 2
02.13.53.13: RNCC: 5 | RNVC: 2

14 Nov 2006

5110-15-062-5547
Single Bow Cutting Punch

150625547
3702-10: RNCC: 3 | RNVC: 2

31 May 1981

5110-66-150-3284
Diagonal Cutting Pliers

661503284
NO PRIMARY REF 66-150-3284: RNCC: 3 | RNVC: 2
04390855: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-98-201-9443
Hand Cold Chisel

982019443
951-4245: RNCC: 3 | RNVC: 2

29 Mar 1988

5110-12-121-6871
Hatchet Handle

121216871
TL5110-0004BEILSTIEL: RNCC: 2 | RNVC: 2
00002030: RNCC: 3 | RNVC: 2
5110-0004SEC2-2: RNCC: 5 | RNVC: 9
5110-004SEC2-2: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-910-4192
Hand Diamond Point Chisel

999104192
DEFSTAN51-11PT29: RNCC: 4 | RNVC: 1
BS3066-TABLE 6: RNCC: 4 | RNVC: 1
FA11236: RNCC: 6 | RNVC: 9
9104192: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-262-8117
Tariere Torse A Vis

142628117
12-4-10: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-192-5185
Sand And Gravel Scoop

151925185
A.22755-P2: RNCC: 3 | RNVC: 2
(241)A7904A.22755-P2: RNCC: 5 | RNVC: 2

24 Mar 2010

5110-98-204-6091
Hand Reamer

982046091
702 0476: RNCC: 3 | RNVC: 2
HAND REAMER 3/16IN HSS: RNCC: 3 | RNVC: 2

5 Jul 1996

5110-22-617-5185
Hand File Set

226175185
DA8408-126: RNCC: 3 | RNVC: 2

1 Jul 2008

5110-33-203-6062
Hand Metal Cutting Shears

332036062
76 7740: RNCC: 3 | RNVC: 2

11 Jun 2004

5110-14-287-8283
Tube Cutter

142878283
2104: RNCC: 3 | RNVC: 2

1 Jan 1972

5110-15-214-6084
Cesoia Lamiera

152146084
25-250: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-17-015-5868
Hand File

170155868
TVA5110-2-263-005-1.1.3: RNCC: 3 | RNVC: 2
TVA5110-2-263-005: RNCC: 5 | RNVC: 1

17 Jun 1972

5110-66-152-2165
Knife Blade

661522165
NO PRIMARY REF 66-152-2165: RNCC: 3 | RNVC: 2
46659000: RNCC: 5 | RNVC: 2

18 Jun 2004

5110-99-910-4262
Hardy

999104262
H538: RNCC: 3 | RNVC: 1
FA11522: RNCC: 6 | RNVC: 9
910-4262: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-715-6147
Cable Slitter

997156147
SL-400: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-99-910-6444
Stencil Cut Die Set

999106444
NO PRIMARY REF 99-910-6444: RNCC: 3 | RNVC: 2
C1S100: RNCC: 5 | RNVC: 2
FA17752: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-344-3685
Hand Reamer

993443685
NO PRIMARY REF 99-344-3685: RNCC: 3 | RNVC: 2
025546: RNCC: 5 | RNVC: 2

26 Nov 2004

5110-15-208-9248
Scalpelli Acciaio C

152089248
3656-125: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-125-9256
Compasso In Acciaio

151259256
4251/1-190: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-214-8737
Tronchese Con Tagli

152148737
2191G-160: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-639-6087
Hand Hacksaw Frame

216396087
1237: RNCC: 3 | RNVC: 1
GGGF671: RNCC: 4 | RNVC: 1
1027: RNCC: 5 | RNVC: 2
1F115350: RNCC: 5 | RNVC: 9
5110-0726: RNCC: 5 | RNVC: 9
1T1834: RNCC: 5 | RNVC: 9
353: RNCC: 5 | RNVC: 9

4 Jun 1968

5110-25-160-6229
Crosscut Hand Saw

251606229
NO PRIMARY REF 25-160-6229: RNCC: 3 | RNVC: 2
21157: RNCC: 5 | RNVC: 2

8 Apr 2011

5110-12-309-0771
Hand File

123090771
2172162: RNCC: 3 | RNVC: 2
2405-160-2: RNCC: 3 | RNVC: 2
2172-160-2: RNCC: 5 | RNVC: 2
51402204: RNCC: 5 | RNVC: 2

11 Dec 1986

5110-15-144-6732
Tronchese A Doppia

151446732
194-160: RNCC: 3 | RNVC: 2
194002: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-22-111-7211
Straight Trimmers Shears

221117211
B1040: RNCC: 3 | RNVC: 2
B.1040: RNCC: 3 | RNVC: 2
21-110-20: RNCC: 3 | RNVC: 2
27-144: RNCC: 5 | RNVC: 2
653.275-0000348: RNCC: 5 | RNVC: 9

1 Jan 1969

5110-66-104-6720
Craftsman's Knife

661046720
91-150: RNCC: 3 | RNVC: 2
10-150: RNCC: 3 | RNVC: 2
GF911-50: RNCC: 5 | RNVC: 2
925: RNCC: 5 | RNVC: 2
925: RNCC: 5 | RNVC: 2

25 Apr 1981

5110-13-102-8812
Hand File

131028812
NBN496A5-150B2: RNCC: 2 | RNVC: 2

1 Apr 1975

5110-99-465-3618
Sheet Metal Punch

994653618
NO PRIMARY REF 99-465-3618: RNCC: 3 | RNVC: 2
1B5557: RNCC: 5 | RNVC: 2
1B5557: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-402-0980

5110-99-710-9425
Eco Chamfering Tool

5110-99-138-8308

5110-12-122-2491
Hand Reamer

121222491
DIN204-B4: RNCC: 2 | RNVC: 2
445-4: RNCC: 3 | RNVC: 2
11682040: RNCC: 3 | RNVC: 2
024012-4: RNCC: 3 | RNVC: 2
513E201HSSFERTIG4SPIRALGENUTET: RNCC: 5 | RNVC: 9
D4DIN204: RNCC: 5 | RNVC: 9
DIN204-D4: RNCC: 5 | RNVC: 9
DIN204D4: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-132-1890
Single Bow Cutting Punch

121321890
DIN7200-B2: RNCC: 2 | RNVC: 2
B2DIN7200: RNCC: 5 | RNVC: 2
DIN7200B2: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-149-7546
Hand File

661497546
NO PRIMARY REF 66-149-7546: RNCC: 3 | RNVC: 2
07081802: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-25-100-0905
Electricians' Scissors

251000905
N6R38801: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-15-217-5485
Lame Oro Per Seghet

152175485
EXRI7904639: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-303-8643

5110-14-568-0557
Exposed Blade Tube Deburring Tool

145680557
DT200: RNCC: 3 | RNVC: 2
DT-200: RNCC: 5 | RNVC: 2
DT200: RNCC: 5 | RNVC: 2

5 May 2011

5110-99-910-5651
Hollo Cutting Punch

999105651
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H21039: RNCC: 5 | RNVC: 2
DL9A: RNCC: 5 | RNVC: 9
DL9A-H5401: RNCC: 5 | RNVC: 9
H5401: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-27-011-3981
Hand File

270113981
99999-NIIN-DA0037173: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-99-910-4278
Glass Cutter

999104278
C00RDPATH570: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 5 | RNVC: 9
DL9A-H570: RNCC: 5 | RNVC: 9
H570: RNCC: 6 | RNVC: 9
FA11610: RNCC: 6 | RNVC: 9
1A549: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-186-2662
Pialla Per Rifinitu

151862662
07156410: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-21-105-1234

5110-21-105-1105

5110-14-271-7254

5110-12-180-4740
Hand File

121804740
DIN7261-B100-3: RNCC: 2 | RNVC: 2
3122103: RNCC: 3 | RNVC: 2
B100-3DIN7261: RNCC: 5 | RNVC: 2
DIN7261B100-3: RNCC: 5 | RNVC: 9

12 Sep 1979

5110-99-428-7409
Hand File

994287409
BS498 PART 1-1-8 IN.: RNCC: 2 | RNVC: 2
3393: RNCC: 5 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
181N: RNCC: 6 | RNVC: 9
BS498PT1: RNCC: 6 | RNVC: 9
F1FA13267: RNCC: 6 | RNVC: 9
1A7121: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-6469
Hand Metal Stamping Die Set

999106469
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A-H2604: RNCC: 5 | RNVC: 9
DL9A: RNCC: 5 | RNVC: 9
H2604: RNCC: 6 | RNVC: 9
FA17800: RNCC: 6 | RNVC: 9
1C2340: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-199-3352
Hand Reamer

121993352
105-15.000: RNCC: 3 | RNVC: 2
105-15-000: RNCC: 5 | RNVC: 2

12 Apr 1984

5110-15-199-0762
Double Bow Cutting Punch

151990762
3703-28: RNCC: 3 | RNVC: 2
C3703-28: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-12-121-4342
Firmer Chisel

121214342
TL5110-0024-6: RNCC: 2 | RNVC: 2
DIN5139-B14GA: RNCC: 2 | RNVC: 2
00.07.40.61: RNCC: 5 | RNVC: 2
B14GADIN5139: RNCC: 5 | RNVC: 2
164-14: RNCC: 5 | RNVC: 9
B14DIN5139: RNCC: 5 | RNVC: 9
DIN5139B14GA: RNCC: 5 | RNVC: 9
5110-0024-6: RNCC: 5 | RNVC: 9
5110-024-6: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-126-1658
Hand Reamer

121261658
DIN206-A2-HSS: RNCC: 2 | RNVC: 2
301-A2: RNCC: 3 | RNVC: 2
F1111-2,0: RNCC: 3 | RNVC: 2
301-FORM A-2,0: RNCC: 5 | RNVC: 2
A2DIN206: RNCC: 5 | RNVC: 9
DIN 206-A 2-HSS: RNCC: 5 | RNVC: 9
DIN206-A-2-HSS: RNCC: 5 | RNVC: 9

30 May 1969

5110-17-115-7568
Zaagketting 18"

171157568
501 84 04-72: RNCC: 3 | RNVC: 2

4 Jun 2003

5110-66-146-0720
Round File

661460720
70502-03: RNCC: 3 | RNVC: 2
70502-03: RNCC: 5 | RNVC: 2

5 May 2000

5110-16-001-6674
Hand Cold Chisel

160016674
CSN232820-250: RNCC: 2 | RNVC: 2
101-250PH: RNCC: 3 | RNVC: 2

28 Feb 2002

5110-17-115-0186
Hand Belt Cutter

171150186
SPEC2002103/12: RNCC: 3 | RNVC: 2

1 Jul 2002

5110-15-212-7267
Sega A Tazza Con De

152127267
HM3608-36: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-392-0800
Knife Blade Handle

123920800
07144202: RNCC: 3 | RNVC: 2

2 May 2013

5110-21-639-5041
Turning Chisel

216395041
476: RNCC: 3 | RNVC: 1

25 May 1968

5110-21-637-5649
Reamer Blade Set

216375649
30: RNCC: 3 | RNVC: 2

25 May 1968

5110-12-309-3545
Hand Reamer

123093545
DIN206-B5,04H11-HSS: RNCC: 2 | RNVC: 2

19 Jan 1987

5110-14-274-7904
A Monture Scie

142747904
NO PRIMARY REF14-274-7904: RNCC: 3 | RNVC: 2
354-80: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-21-637-5395
Hand Reamer

216375395
B94-2: RNCC: 3 | RNVC: 1
B174-2: RNCC: 3 | RNVC: 1
712-048610: RNCC: 3 | RNVC: 2
B5-14: RNCC: 4 | RNVC: 1
50-10957: RNCC: 5 | RNVC: 9

4 Jun 1968

5110-12-135-9084
Hand File

121359084
1196201: RNCC: 3 | RNVC: 2
1196P-200-1: RNCC: 5 | RNVC: 2
200X1DIN8341: RNCC: 5 | RNVC: 9
1960G200-1: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-258-1144
Vilebrequin A Carre

142581144
NO PRIMARY REF14-258-1144: RNCC: 3 | RNVC: 2
225: RNCC: 5 | RNVC: 2
225: RNCC: 5 | RNVC: 9

1 Jan 1969

5110-99-943-7821
Spokeshave

999437821
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H5592: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H5592: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-174-6763
Hand Masonry Drill Set

121746763
2660NR6T010AND2660AANDB: RNCC: 3 | RNVC: 9

19 Jul 1978

5110-12-385-2659
Oval Cutting Punch

123852659
50.000.148: RNCC: 3 | RNVC: 2

16 May 2011

5110-21-866-8237
Hand Metal Stamping Die Set

218668237
801: RNCC: 3 | RNVC: 2
02271: RNCC: 5 | RNVC: 2

16 Jun 1972

5110-15-182-5409
Spellaguaina Univer

151825409
294-6942: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-137-5668

5110-37-502-7423

5110-15-233-0724
Graffatrice Manuale

152330724
0-69-702: RNCC: 3 | RNVC: 2
511015E014870: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-25-101-5525

5110-99-812-9050

5110-12-199-0059
Pipe Cutter Cutting Wheel

121990059
SR155: RNCC: 3 | RNVC: 2
2180-021: RNCC: 3 | RNVC: 2
230210: RNCC: 5 | RNVC: 2
2180-02: RNCC: 5 | RNVC: 9
2180-1: RNCC: 5 | RNVC: 9
2180/02: RNCC: 5 | RNVC: 9

20 Mar 1984

5110-21-814-1250
Die Dimpling Body

218141250
ZT177101-5/32: RNCC: 3 | RNVC: 2
ZT177101-5-32: RNCC: 5 | RNVC: 2

13 Jun 1964

5110-21-814-1248
Die Dimpling Body

218141248
ZT177101-3/32: RNCC: 3 | RNVC: 2
ZT177101-3-32: RNCC: 5 | RNVC: 2

13 Jun 1964

5110-41-002-1440
Hand Reamer

410021440
3300004001: RNCC: 3 | RNVC: 2

20 Dec 2012

5110-99-434-7634
Hand Hacksaw Blade

994347634
KT-103-122: RNCC: 3 | RNVC: 2

27 Jun 2012

5110-12-314-1113
Ventilsit Fuehrung

123141113
122305: RNCC: 3 | RNVC: 2
698-769-0000: RNCC: 5 | RNVC: 2
89231057: RNCC: 5 | RNVC: 2

8 Jun 1988

5110-99-910-5403
Ripping Chisel

999105403
A3-9801: RNCC: 3 | RNVC: 2
UKSC4576: RNCC: 4 | RNVC: 1
FA11348: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-4956
Hand File

999104956
DEF1098: RNCC: 4 | RNVC: 1
1A1025: RNCC: 6 | RNVC: 9
1A4513: RNCC: 6 | RNVC: 9
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-4929
Hand File

999104929
DEF1098: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-844-5579

5110-21-842-8827

5110-14-574-3859
Hand Rasp

145743859
RAB.PMD300+MAN0: RNCC: 3 | RNVC: 2

15 Jan 2013

5110-12-368-6951
Hand Cable Stripper

123686951
30010: RNCC: 3 | RNVC: 2

7 Apr 2006

5110-17-122-9024
Pocket Knife

171229024
SMK20-12L-PL: RNCC: 3 | RNVC: 2

5 Mar 2010

5110-12-175-9530
Bearing Scraper

121759530
NO PRIMARY REF 12-175-9530: RNCC: 3 | RNVC: 2
148695: RNCC: 5 | RNVC: 9
C3699-50: RNCC: 5 | RNVC: 9

30 Oct 1978

5110-12-328-6481
Single Bit Ax Handle

123286481
TL5110-0021-030: RNCC: 2 | RNVC: 2
STIEL ILTISAXT 329: RNCC: 3 | RNVC: 2
83-0600UND122-0100: RNCC: 5 | RNVC: 9
TL5110-0021-BILD3: RNCC: 5 | RNVC: 9

11 Jun 1992

5110-12-130-9596
Hand Valve Seat Rotary Tool

121309596
217.11.000: RNCC: 3 | RNVC: 2
VD2-45/30DEG: RNCC: 5 | RNVC: 2
217-11-000: RNCC: 5 | RNVC: 2
300-1: RNCC: 5 | RNVC: 9
300-1VD2-45-30GRAD: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-236-0569
Cassetta Lame 3 Pas

152360569
739-578: RNCC: 3 | RNVC: 2
511015E069741: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-124-8366
Alesatore Cilindric

151248366
7730-9-00: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-252-8400
Deburring Too Blade

992528400
B30: RNCC: 3 | RNVC: 2
1C/8694: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-25-105-1652

5110-98-105-8759

5110-21-895-4480
Hand File

218954480
937514: RNCC: 3 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

20 May 1984

5110-98-105-8787
Hand Reamer

981058787
NO PRIMARY REF 98-105-8787: RNCC: 3 | RNVC: 2
METRIC 2003-25MM: RNCC: 5 | RNVC: 2

30 May 1978

5110-99-549-0181
Hand Hacksaw Blade

995490181
AA45E: RNCC: 3 | RNVC: 2
300-18-100P: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-15-190-0043
Coltelli A Lame

151900043
05233T: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-14-261-4220
Travail Du B Bedane

142614220
145-3: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-22-112-6366

5110-14-244-3694

5110-12-131-7049
Drehwerkzeug Pilot

121317049
216.71.102: RNCC: 3 | RNVC: 2
216.71.503: RNCC: 5 | RNVC: 2
200-20: RNCC: 5 | RNVC: 9
200-20VD1-5-9-6-2: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-187-1191
Pinza

151871191
1472AU/P: RNCC: 3 | RNVC: 2

19 Feb 2009

5110-15-216-3852
Serie Lime 990 Se 5

152163852
990F: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-25-102-8986
Ha Wire Rope Cutter

5110-25-103-1378

5110-99-120-3818

5110-99-836-0456

5110-21-887-7497
Pipe Cutter

218877497
206: RNCC: 3 | RNVC: 2

9 Jan 1982

5110-99-836-0459

5110-15-213-3254
Raspa Da Ebanista M

152133254
6-343-08-2-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-347-5674
Diagonal Cutting Pliers

123475674
950-185: RNCC: 3 | RNVC: 2

8 Jan 1999

5110-15-123-3598
Giravite Da Mm.3X75

151233598
1228/0: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-461-9701

5110-99-136-1895

5110-12-369-3553
Paper Cutter

123693553
3651351: RNCC: 3 | RNVC: 2

26 Jun 2006

5110-15-218-0446
Inserto Mm.8

152180446
5608/39-8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-623-6194
Woodcarving Gouge

226236194
422P-20: RNCC: 3 | RNVC: 2

20 Feb 2012

5110-14-458-1571
Cable Stripper Blade

144581571
165.U: RNCC: 3 | RNVC: 2
165U: RNCC: 5 | RNVC: 2
3148511393000: RNCC: 5 | RNVC: 2
0139300: RNCC: 5 | RNVC: 9
85-694-6226: RNCC: 6 | RNVC: 9

8 Oct 1992

5110-12-131-3843
Framing Chisel

121313843
DIN5143-8GA: RNCC: 2 | RNVC: 2
8DIN5143MG: RNCC: 5 | RNVC: 9
8GADIN5143: RNCC: 5 | RNVC: 9
5110-0024-20: RNCC: 5 | RNVC: 9
5110-024-20: RNCC: 5 | RNVC: 9
166-8: RNCC: 5 | RNVC: 9
341-8: RNCC: 5 | RNVC: 9
341-8MM: RNCC: 5 | RNVC: 9
TL5110-0024-20: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-942-0001
Hand Reamer

999420001
BS122PT2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
9/32" PARALLEL HAND REAMER: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-054-1381
Bucksaw

150541381
56-5-550-800: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-12-131-7013
Reamer Blade Set

121317013
131.13.400: RNCC: 3 | RNVC: 2
131-13-400: RNCC: 5 | RNVC: 2
700-14HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-23-112-9458
Hand Reamer

231129458
I-02-0073: RNCC: 3 | RNVC: 2

25 Nov 1997

5110-21-860-8528
Spud Handle

218608528
229: RNCC: 3 | RNVC: 2
5110-1204: RNCC: 6 | RNVC: 9

15 Apr 1971

5110-98-205-4754
Hand Reamer

982054754
DFAMPD00207 D: RNCC: 2 | RNVC: 2

12 Oct 2000

5110-15-217-5500
Cesoia Mod Italia D

152175500
EXRI7906484: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-105-0032
Punch And Die S Die

211050032
2: RNCC: 3 | RNVC: 1
310080203: RNCC: 3 | RNVC: 2
1F9: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-12-126-1498
Hand Reamer

121261498
NO PRIMARY REF 12-126-1498: RNCC: 3 | RNVC: 2
6-5DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-232-9130
Tronchesino Diagona

152329130
CT0615: RNCC: 3 | RNVC: 2
95 07 34: RNCC: 3 | RNVC: 2
TR25O/C18: RNCC: 3 | RNVC: 2
511015E067003: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-22-121-9139
Diagonal Cutting Pliers

221219139
2101D-160: RNCC: 3 | RNVC: 2
2191D-160: RNCC: 5 | RNVC: 9

29 Mar 1993

5110-12-126-3247
Hand File Set

121263247
2100142AUSZER2123: RNCC: 3 | RNVC: 2
B565: RNCC: 5 | RNVC: 2
148-140-3AUSZER 131-140-3: RNCC: 5 | RNVC: 9
148-140-3AUSZER131-140-3: RNCC: 5 | RNVC: 9
2100-140-3AUSZER2123: RNCC: 5 | RNVC: 9
2112BIS2102TAUSZER2122: RNCC: 5 | RNVC: 9
70X3DIN8342: RNCC: 5 | RNVC: 9
5110-01027: RNCC: 6 | RNVC: 9
5110-01026: RNCC: 6 | RNVC: 9

30 May 1969

5110-15-189-1623
Kit Breacher

151891623
DE-TBK-C: RNCC: 3 | RNVC: 2
(241)AB595DE-TBK-C: RNCC: 5 | RNVC: 2

1 Feb 2010

5110-15-220-4251
Kit Da 7 Matrici Pe

152204251
MATRICIMM10-12-14-16-18-20-22: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-25-119-9374
Craftsman's Knife

251199374
C503-2 1-2IN: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-12-381-9022
Hand Hacksaw Frame

123819022
1100680S: RNCC: 3 | RNVC: 2

15 Apr 2010

5110-14-492-6651
Foret

144926651
NO PRIMARY REF14-492-6651: RNCC: 3 | RNVC: 2
2032480: RNCC: 5 | RNVC: 9
F300 0T 008 4228: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-12-305-1604
Wire Stripper Blade

123051604
NO PRIMARY REF 12-305-1604: RNCC: 3 | RNVC: 2
825597: RNCC: 5 | RNVC: 9

3 Oct 1985

5110-15-197-2539
Screw Thread Insert Breaker

151972539
PN UAS 00042359: RNCC: 3 | RNVC: 2
5120F76035119: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-66-010-7935
Adjustab Blade Set

660107935
MICR0SETBLADESETF: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-12-370-6018
Diagonal Cutting Pliers

123706018
6212120: RNCC: 3 | RNVC: 2
00.15.85.33: RNCC: 5 | RNVC: 2
4003773048008: RNCC: 5 | RNVC: 2

28 Nov 2006

5110-99-466-1748

5110-99-541-1725

5110-99-377-5023
Diagonal Cut Pliers

5110-25-132-7531

5110-99-144-2331

5110-22-614-2807
Firmer Chisel

226142807
1031-10: RNCC: 3 | RNVC: 2
504440010: RNCC: 5 | RNVC: 2

17 Oct 2006

5110-14-229-2625
Burin Pour Les Ruba

142292625
VTR250-1091: RNCC: 3 | RNVC: 2

1 Jan 1967

5110-98-105-2339
Diagonal Cutting Pliers

981052339
PW773/5: RNCC: 3 | RNVC: 2
942-5I CRESCENT: RNCC: 6 | RNVC: 9

2 Feb 1976

5110-98-107-7174
Hand Reamer

981077174
PARALLEL1-7/32X6X12IN.: RNCC: 3 | RNVC: 2

10 Feb 1984

5110-25-102-6355
Hand File

251026355
FS 5110-0645 POS 6: RNCC: 2 | RNVC: 2

1 Jan 1984

5110-34-031-2126
Block Wooden

340312126
TRAK 3 TON GS CARGO M/BENZ-1: RNCC: 3 | RNVC: 2
TRAK 3 TON GS CARGO M/BENZ-1: RNCC: 6 | RNVC: 9

24 Feb 2004

5110-15-125-6832
Lima Per Meccanica

151256832
2560/3-12: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-208-8238
Alesatore

152088238
3AANPERMD25: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-270-4480

5110-25-117-4171
Hand File

5110-22-251-2474

5110-98-857-6383

5110-98-857-3276

5110-12-179-0279
Hand File

121790279
DICK0FIL2-260MM: RNCC: 3 | RNVC: 9

30 May 1979

5110-27-014-9001
Single Bow Cutting Punch

270149001
5110ATFD0113: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-14-451-4083
Double Bow Cutting Punch

144514083
245.J2DIAM10: RNCC: 3 | RNVC: 2

19 Nov 1991

5110-12-151-3214
Ven Schneideinsatz

121513214
21664130: RNCC: 3 | RNVC: 2
216.64.130STAHL2: RNCC: 5 | RNVC: 2
75GRAD35-52MMSITZDM: RNCC: 5 | RNVC: 9
200-65: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-160-2610
Hand Reamer

661602610
UCT 120131-4550: RNCC: 3 | RNVC: 2

15 May 2012

5110-15-230-4323
Cesoie

152304323
1896/0-165: RNCC: 3 | RNVC: 2
511015E097663: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-99-910-4892
Hand File

999104892
DEF1098: RNCC: 4 | RNVC: 1
H00994: RNCC: 5 | RNVC: 2
9104892: RNCC: 6 | RNVC: 9
1A1122: RNCC: 6 | RNVC: 9
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
F1FA13375: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-124-0311
Confezione Di Lame

151240311
8426: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-98-103-4333

5110-21-112-0687

5110-99-788-8471
Hand Metal Cutting Shears

997888471
G056: RNCC: 3 | RNVC: 2

23 Feb 1988

5110-12-141-1708
Hand File

121411708
C130-100-SH2: RNCC: 3 | RNVC: 2
2192102: RNCC: 3 | RNVC: 2
2403-100-2: RNCC: 3 | RNVC: 2
2192-100-2: RNCC: 5 | RNVC: 2
L50X2DIN8342: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-126-2051
Hand Masonry Drill

121262051
NO PRIMARY REF 12-126-2051: RNCC: 3 | RNVC: 2
210-12-300: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-165-4275
Serie 8 Cgiavi A't'

151654275
280TS8: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-25-103-3374
Double Bow Cutting Punch

251033374
5-8IN: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-21-807-1469
Hand Reamer

218071469
B174-2: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
712-049865: RNCC: 3 | RNVC: 2
B5-14: RNCC: 4 | RNVC: 1
4503 31-32: RNCC: 5 | RNVC: 2
50-10980: RNCC: 5 | RNVC: 9

4 Jun 1968

5110-99-120-0446
Firmer Chisel

991200446
DEF STAN 51-11:PART 27: RNCC: 4 | RNVC: 1
BS1943: RNCC: 4 | RNVC: 1
M373-19MM: RNCC: 5 | RNVC: 2
BS1943-TABLE1A: RNCC: 6 | RNVC: 9
TABLE1A: RNCC: 6 | RNVC: 9
AP13251: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-426-2221
End Cutting Nippers

144262221
190.20EG: RNCC: 3 | RNVC: 2
190-20EG: RNCC: 5 | RNVC: 2
3148511440308: RNCC: 5 | RNVC: 2
0144030: RNCC: 5 | RNVC: 9

9 Aug 1988

5110-21-849-7786
Tube Cutter

218497786
30: RNCC: 3 | RNVC: 2
5110-0271: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-66-012-4459
Firmer Chisel

660124459
16-824: RNCC: 3 | RNVC: 2
101: RNCC: 5 | RNVC: 9
101-1 1/2 IN.: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-12-184-4016
Hand Oil Groove Chisel

121844016
0003-0216-000: RNCC: 3 | RNVC: 2
0003-0216-000: RNCC: 5 | RNVC: 9

22 Jul 1980

5110-66-049-5870
Hand Hacksaw Blade

660495870
GID506: RNCC: 4 | RNVC: 1

18 May 1972

5110-21-639-5809
Hand Metal Stamping Die Set

216395809
1550: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-14-394-4102

5110-14-490-8850
Alesoir

144908850
4067 010 001 855: RNCC: 3 | RNVC: 2
F300 0T 000 5122: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-25-100-4157
Hand File

5110-15-214-9950
Lima Piatta

152149950
2594-14: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-167-6913
Hand File

121676913
DIN7261-C125-1: RNCC: 2 | RNVC: 2
1132-125-1: RNCC: 3 | RNVC: 2
3132121: RNCC: 3 | RNVC: 2
1136-125-1: RNCC: 5 | RNVC: 9
C125-1DIN7261: RNCC: 5 | RNVC: 9
DIN7261C125-1: RNCC: 5 | RNVC: 9

12 Jan 1977

5110-14-567-2350
Hand Optical Fiber Cleaving Tool

145672350
2534: RNCC: 3 | RNVC: 2

23 Feb 2011

5110-15-144-3470
Lima Tonda Taglio B

151443470
2358GD8: RNCC: 3 | RNVC: 2
2562-3D8: RNCC: 3 | RNVC: 2
700FD8: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-25-100-0886
Hand Rasp

251000886
N6Q4882-1: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-15-210-4247
Coltello A Lama Fis

152104247
10-199: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-740-9681

5110-99-607-1412

5110-14-312-4486

5110-15-214-2239
Diagonal Cutting Pliers

152142239
M7131-250: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-105-2139
Punch And Die Punch

211052139
2: RNCC: 3 | RNVC: 1
2-11/32: RNCC: 3 | RNVC: 1
300080344: RNCC: 3 | RNVC: 2

4 Jun 1968

5110-33-203-5718
Chisel And Gouge Handle

332035718
010903: RNCC: 3 | RNVC: 2
5110-33-P42-0412: RNCC: 6 | RNVC: 9

27 May 2004

5110-21-893-1049
Hand Reamer

218931049
18-10009: RNCC: 3 | RNVC: 2
4600: RNCC: 5 | RNVC: 1

14 May 1983

5110-15-210-2893
Serragiunto

152102893
L6156-150: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-340-0871
Hand File

123400871
C131-100-SH2: RNCC: 3 | RNVC: 2

26 Feb 1996

5110-66-150-3085
Knockout Punch And Die

661503085
NO PRIMARY REF 66-150-3085: RNCC: 3 | RNVC: 2
07150607: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-15-124-8451
Tronchese X Meccani

151248451
1815-1-160: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-870-6033
Leatherman Tool

998706033
LT450B: RNCC: 3 | RNVC: 2
LT450B: RNCC: 6 | RNVC: 9

7 Apr 1998

5110-99-891-0294
Pipes Seals Bullet

998910294
MC1275221: RNCC: 3 | RNVC: 2

20 May 2002

5110-15-221-6715
Lima

152216715
5110RP4800706: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-112-7269

5110-26-300-3079
Cylinder Ridge Reamer

263003079
335600400: RNCC: 3 | RNVC: 2

6 Mar 2007

5110-37-505-3357

5110-15-175-5218
Manico In Legno 280

151755218
C3432/7-200: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-99-803-0100
Tyre Repair Rasp

998030100
83: RNCC: 3 | RNVC: 2
42-616: RNCC: 5 | RNVC: 2
K-22A: RNCC: 5 | RNVC: 2
393: RNCC: 5 | RNVC: 2
596010: RNCC: 5 | RNVC: 2
LV6MT24348: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-126-2481
Kommutatorsa Blatt

121262481
49100-050: RNCC: 3 | RNVC: 2
120558: RNCC: 3 | RNVC: 2
686246-0-5MM: RNCC: 5 | RNVC: 9
2205-0-5MM: RNCC: 5 | RNVC: 9
2205-05: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-165-3645
Alesatore

151653645
6221195: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-437-5873

5110-14-226-7276
Single Bow Cutting Punch

142267276
4637-11: RNCC: 3 | RNVC: 2
8017110001: RNCC: 3 | RNVC: 2
213-11: RNCC: 3 | RNVC: 2
153-11: RNCC: 3 | RNVC: 9
SYB0276: RNCC: 5 | RNVC: 2
107-11: RNCC: 5 | RNVC: 9
345-10-11: RNCC: 5 | RNVC: 9
375-11: RNCC: 5 | RNVC: 9

1 Jan 1966

5110-21-814-1194
Dimpling Die

218141194
ZT1774-#8: RNCC: 3 | RNVC: 2
ZT1774-8: RNCC: 5 | RNVC: 2

13 Jun 1964

5110-14-428-5895
Etrier Corps

144285895
4602PSE101-0001: RNCC: 3 | RNVC: 2

8 Dec 1988

5110-12-010-5174

5110-21-866-8545

5110-17-110-3988
One Man Crosscut Saw

171103988
1400050: RNCC: 3 | RNVC: 2
ZAAG, TREK, 1-MANS, 3FT: RNCC: 5 | RNVC: 2

4 Sep 1996

5110-12-156-1638
Hand File

121561638
M465-02: RNCC: 3 | RNVC: 2
M465-02: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-139-9058
Tagliacavi In Accia

151399058
295 IS/230: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-99-300-3659
Hand Metal Cutting Shears

993003659
MONODEX: RNCC: 3 | RNVC: 2

12 Sep 1991

5110-12-362-5177
Hand File Set

123625177
54.0084.960.91: RNCC: 3 | RNVC: 2
1-478-08-1-2: RNCC: 5 | RNVC: 2

4 Mar 2004

5110-14-267-4791
Single Bow Cutting Punch

142674791
8017120001: RNCC: 3 | RNVC: 2
213-12: RNCC: 3 | RNVC: 2
SYQ0838: RNCC: 5 | RNVC: 2
2216-12: RNCC: 5 | RNVC: 9
4637-12: RNCC: 5 | RNVC: 9
375-12: RNCC: 5 | RNVC: 9
345-10-12: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-99-456-2148

5110-22-221-3634
Hand File

222213634
OEBERG 1-104-10-3: RNCC: 3 | RNVC: 2
KAP.01: RNCC: 5 | RNVC: 9
FIL,DREJEBAENK: RNCC: 5 | RNVC: 9
72-1733-5: RNCC: 6 | RNVC: 9

4 Dec 1972

5110-15-165-3700
Coltello Di Salvat

151653700
742118: RNCC: 3 | RNVC: 2
(241)A3488742118: RNCC: 5 | RNVC: 2

1 Nov 2002

5110-99-812-3741

5110-33-103-0328

5110-99-910-4079
Ratchet Bit Brace

999104079
BS1978: RNCC: 4 | RNVC: 1
FA10400: RNCC: 6 | RNVC: 9
9104079: RNCC: 6 | RNVC: 9
1A152: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-33-102-2060

5110-99-910-7770
Saddlers Edge Shave

999107770
H2822: RNCC: 2 | RNVC: 2
FA18160: RNCC: 6 | RNVC: 9
FA18160: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-812-3762

5110-98-104-6817
End Cutting Nippers

981046817
NO PRIMARY REF 98-104-6817: RNCC: 3 | RNVC: 2
72-7IN: RNCC: 5 | RNVC: 2

1 Nov 1973

5110-14-264-0414
Rabbet Plane

142640414
4549-22: RNCC: 3 | RNVC: 9

1 Jan 1970

5110-14-401-5184
Hand Metal Cutting Shears

144015184
05090002000: RNCC: 3 | RNVC: 2
509-002: RNCC: 5 | RNVC: 2
3597470083475: RNCC: 5 | RNVC: 2
SES16C: RNCC: 5 | RNVC: 2
509002: RNCC: 5 | RNVC: 2

13 Jun 1985

5110-12-313-0741
Hand Reamer

123130741
301 B 1/1 IN: RNCC: 3 | RNVC: 2

2 Mar 1988

5110-15-215-3045
Barretta Acciaio Tr

152153045
F778/5-22: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-100-0018
One Man Crosscut Saw

221000018
225-1050MM-SKOERSAV: RNCC: 3 | RNVC: 2
11.31: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-66-149-8149
Hand Metal Cutting Shears

661498149
NO PRIMARY REF 66-149-8149: RNCC: 3 | RNVC: 2
02722519: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-12-126-1905
Cutting Punch Insert

121261905
TL5110-0033-A8: RNCC: 2 | RNVC: 2
8200: RNCC: 3 | RNVC: 2
1200: RNCC: 5 | RNVC: 9
1015: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-221-3903
Hand File

222213903
303-16-1: RNCC: 3 | RNVC: 2

13 Dec 1972

5110-21-892-1814
Scissors

218921814
TC-1: RNCC: 3 | RNVC: 2
TC-1: RNCC: 5 | RNVC: 2
TC1: RNCC: 5 | RNVC: 2

20 Feb 1983

5110-14-343-1836
Screw Thread Insert Breaker

143431836
01584050000: RNCC: 3 | RNVC: 2
01584050000: RNCC: 5 | RNVC: 2
544102600: RNCC: 5 | RNVC: 2
01585050000: RNCC: 5 | RNVC: 9

16 Jun 1977

5110-21-876-0447
Ice Chisel

218760447
5110-1921: RNCC: 3 | RNVC: 2

5 Jul 1977

5110-14-202-9501
Hand Metal Cutting Shears

142029501
NO PRIMARY REF14-202-9501: RNCC: 3 | RNVC: 2
24BIS1-22: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-15-216-5508
Falcetto

152165508
FALCETTO: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-155-8964
Hand File

121558964
NO PRIMARY REF 12-155-8964: RNCC: 3 | RNVC: 2
6350-4: RNCC: 5 | RNVC: 9
DENTALFEILE4 1-2IN4: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-165-3986
Mecchia X Trapano E

151653986
4509G30: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-823-8427

5110-99-469-5404

5110-99-942-0182

5110-99-132-9626
Pocket Knife

5110-99-923-8087
Crosscutti Hand Saw

999238087
BS3159PART1-CLASS 3: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT24: RNCC: 4 | RNVC: 1
0276-14621: RNCC: 6 | RNVC: 9
CLASS 3: RNCC: 6 | RNVC: 9
1C7866: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-205-0606
Coltello Chiudibile

152050606
FX-BT01B: RNCC: 3 | RNVC: 2
(241)AG180FX-BT01B: RNCC: 5 | RNVC: 2

16 Feb 2012

5110-12-185-8585
Hand Cape Chisel

121858585
NO PRIMARY REF 12-185-8585: RNCC: 3 | RNVC: 2
3649-175: RNCC: 5 | RNVC: 9
107507: RNCC: 5 | RNVC: 9

4 Nov 1980

5110-12-155-9459
Hand File

121559459
M470-202: RNCC: 3 | RNVC: 2
M470-202: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-374-9486
Diagonal Cutting Pliers

123749486
2061-110: RNCC: 3 | RNVC: 2

9 Apr 2008

5110-27-010-6594
Hand File

270106594
99999-NIIN-DA0039347: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-232-3453
Tagliacavi Acciaio

152323453
295IS/170: RNCC: 3 | RNVC: 2
511015E070023: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-12-148-6009
Hand Reamer

121486009
NO PRIMARY REF 12-148-6009: RNCC: 3 | RNVC: 2
101572: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-002-4682
Mandrel

150024682
CBM-12-3-N-1-20-V2: RNCC: 3 | RNVC: 2

29 Aug 2013

5110-99-902-3924
Hand Operated Wire Rope Cutter

999023924
66067: RNCC: 3 | RNVC: 2
DRAPER 66067: RNCC: 5 | RNVC: 2
0346A15-L/E 11: RNCC: 6 | RNVC: 9

11 Nov 2003

5110-99-738-3400
Hand Operated Cable Cutter

997383400
NO PRIMARY REF 99-738-3400: RNCC: 3 | RNVC: 2
539-643: RNCC: 5 | RNVC: 2

3 Nov 1999

5110-66-079-0354
Hand Operated Wire Rope Cutter

660790354
910-4276: RNCC: 3 | RNVC: 2

9 Sep 1975

5110-27-011-7727
Hand Reamer

270117727
10111KR5020: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-185-1290
Scalpello Per Marte

151851290
P-13297: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-22-617-0161
Hand File Set

226170161
4320-4: RNCC: 3 | RNVC: 2

22 Apr 2008

5110-12-195-4621
Hand Reamer

121954621
WN50F-5: RNCC: 3 | RNVC: 2

28 Feb 1983

5110-14-400-6430
Hand Cold Chisel Set

144006430
262.JS4: RNCC: 3 | RNVC: 2
262JS4: RNCC: 5 | RNVC: 2
3148515395000: RNCC: 5 | RNVC: 2
262JSH: RNCC: 5 | RNVC: 9
0539500: RNCC: 5 | RNVC: 9

8 May 1985

5110-14-273-7542
End Cutting Nippers

142737542
E73-151-22: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-25-000-4620

5110-25-100-0847
Hand Reamer

5110-99-122-4551

5110-15-185-2217
Cesoia A Leva

151852217
RM6N: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-21-639-5959

5110-21-639-5587

5110-99-136-2055
Diagonal Cutting Pliers

991362055
BS3087: RNCC: 4 | RNVC: 1
DL-9-A-H6821: RNCC: 6 | RNVC: 9
DEFSTAN51-10: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H6821: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-98-107-7159
Hand Reamer

981077159
PARALLEL7/8X4-1/2X9IN.: RNCC: 3 | RNVC: 2

10 Feb 1984

5110-17-115-3726
Pliers

171153726
3772H-120: RNCC: 3 | RNVC: 2

15 Jan 2003

5110-12-365-9246
Hand File

123659246
1-250-08-2-0: RNCC: 3 | RNVC: 2
7311518020422: RNCC: 5 | RNVC: 2

17 Feb 2005

5110-15-192-9951
Finger Grip Hand Saw

151929951
AC101: RNCC: 3 | RNVC: 2
(241)AH825AC101: RNCC: 5 | RNVC: 2

1 Apr 2010

5110-21-639-3183
Straight Trimmers Shears

216393183
121-2296: RNCC: 3 | RNVC: 2
S-60: RNCC: 5 | RNVC: 2
S61: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-21-639-5661
Hand Metal Cutting Punch And Die Set

216395661
7: RNCC: 3 | RNVC: 1
310070188: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-134-5624
Tronchese Bernstein

151345624
LU2020-00: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-14-266-6986

5110-25-117-2509

5110-25-117-9220
Armeringsfil

5110-13-102-8901
Hand Reamer

131028901
NBN485H8-5-5CS: RNCC: 2 | RNVC: 2

1 Apr 1975

5110-15-165-3751
Tronchese A Tagl.Di

151653751
1185001: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-98-205-5565
Pocket Knife

982055565
DFAMPD00178 B: RNCC: 2 | RNVC: 2

4 Apr 2001

5110-15-165-3680
Tagliabulloni Con T

151653680
18862910: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-22-610-2539
Tube Cutter

226102539
2A 1-2IN: RNCC: 3 | RNVC: 2

29 Apr 2005

5110-15-161-8162
Lima Triangolare Da

151618162
LIMA TRIANGOLARE DA 8 POLLICI: RNCC: 3 | RNVC: 2

1 Oct 2000

5110-12-304-1805
Hand Operated Cable Cutter

123041805
6326: RNCC: 3 | RNVC: 9

20 Jun 1985

5110-99-127-9279

5110-99-204-5594

5110-12-196-9311
Hand File

121969311
2112161: RNCC: 3 | RNVC: 2
2-300-16-1-0: RNCC: 3 | RNVC: 2
2401-160-1: RNCC: 3 | RNVC: 2
2112-160-1: RNCC: 5 | RNVC: 2
7311518020507: RNCC: 5 | RNVC: 2

31 Aug 1983

5110-21-637-5316
Hand Reamer

216375316
B174-2: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1
4500-1 3-16: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-21-872-0861
Diagonal Cutting Pliers

218720861
77D: RNCC: 3 | RNVC: 2
437G: RNCC: 5 | RNVC: 2
40-7CN: RNCC: 5 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

7 Oct 1975

5110-15-175-0575
O-Ring Calibration

151750575
43F-M0200-02000-460-102: RNCC: 3 | RNVC: 2

29 Dec 2003

5110-21-639-4066
Hatchet Handle

216394066
554: RNCC: 3 | RNVC: 1
5110-0783: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-14-339-7979
Coupe-Tube Molette

143397979
08097-00: RNCC: 3 | RNVC: 2

18 Jan 1977

5110-21-851-2138
Hand File

218512138
5110-0362: RNCC: 3 | RNVC: 2

2 Aug 1968

5110-99-942-0220

5110-99-942-0269

5110-99-910-9985
Hand Reamer

999109985
BS122 PART 2: RNCC: 4 | RNVC: 1
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16258: RNCC: 6 | RNVC: 9
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-307-1104
Hand Cable Stripper

123071104
726369-0: RNCC: 3 | RNVC: 2

12 May 1986

5110-15-128-2127
Levachiodi Mm 320

151282127
3592-320: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-136-4163
Ferri Per Pialletti

151364163
6022-51: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-99-910-4924
Hand File

999104924
DEF1098: RNCC: 4 | RNVC: 1
H20300: RNCC: 5 | RNVC: 2
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
FA13512: RNCC: 6 | RNVC: 9
9104924: RNCC: 6 | RNVC: 9
1A923: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-720-5979
Trimming Knif Blade

997205979
NO PRIMARY REF 99-720-5979: RNCC: 3 | RNVC: 2
DB2892: RNCC: 5 | RNVC: 2
546-758: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-99-763-6246
Knife And Blade

5110-33-145-5853

5110-25-114-2803

5110-37-080-1572

5110-14-438-5505
End Cutting Nippers

144385505
321-22LA-N: RNCC: 3 | RNVC: 2

26 Mar 1990

5110-66-150-2987
Hand Metal Stamping Die Set

661502987
NO PRIMARY REF 66-150-2987: RNCC: 3 | RNVC: 2
06929703: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-14-256-8844
Single Bow Cutting Punch

142568844
4637-21: RNCC: 3 | RNVC: 9

1 Jan 1969

5110-15-218-9412
Morsa Girevole A 36

152189412
1222100: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-136-2529
Scalpello Per Legno

151362529
6055-1-8: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-99-466-9845
Hand File

5110-99-740-3981
Hand Reamer

5110-21-116-2033

5110-66-142-5194
Hand Reamer

661425194
SPECIAL REAMER E96: RNCC: 3 | RNVC: 1

16 Oct 1996

5110-99-471-3832
Pocket Folding Multi-Tool

994713832
SE002407: RNCC: 3 | RNVC: 2

18 May 2006

5110-99-606-9246

5110-17-701-4761
Hand Reamer

177014761
13-25H7DIN206SS: RNCC: 2 | RNVC: 1
586-13-25: RNCC: 3 | RNVC: 2
DIN206: RNCC: 4 | RNVC: 1

27 Apr 1970

5110-12-140-5842
Hand Reamer

121405842
DIN9-A12: RNCC: 2 | RNVC: 2
A12DIN9: RNCC: 5 | RNVC: 2
12DIN9SCHNELLARBEITSSTAHL: RNCC: 5 | RNVC: 9
DIN9A12: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-126-1461
Hand Reamer

121261461
DIN206-A24-HSS: RNCC: 2 | RNVC: 2
24DIN206SS: RNCC: 5 | RNVC: 2

30 May 1969

5110-12-129-6394
Compass Saw Blade

121296394
NO PRIMARY REF 12-129-6394: RNCC: 3 | RNVC: 2
93 1/4-300: RNCC: 5 | RNVC: 9
931-4-300: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-639-4719
Hand File

216394719
920564: RNCC: 3 | RNVC: 2
81-136001: RNCC: 3 | RNVC: 2
5110-0391: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-14-207-7592

5110-25-105-9892
Pakningsskja Skjaer

5110-14-478-2994

5110-99-815-1801

5110-99-910-4997
Hand File

999104997
C00RDPATH4027: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT6: RNCC: 6 | RNVC: 9
1A988: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-213-2776
Ascia Antiscintilla

152132776
9000-3000: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-350-3203
Hand Reamer

123503203
104: RNCC: 3 | RNVC: 2

15 Mar 2000

5110-99-333-1597

5110-66-024-4464
Hand Hacksaw Blade

5110-99-910-4253
Turning Chisel

999104253
DEF STAN 51-11:PART 27: RNCC: 4 | RNVC: 1
BS1943: RNCC: 4 | RNVC: 1
H439: RNCC: 6 | RNVC: 9
910-4253: RNCC: 6 | RNVC: 9
1C5264: RNCC: 6 | RNVC: 9
BS1943-TABLE 6: RNCC: 6 | RNVC: 9
TABLE 6: RNCC: 6 | RNVC: 9
WX1515: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-27-000-8088
Hand Metal Cutting Shears

270008088
10131KM0154: RNCC: 3 | RNVC: 2
6210 05 0300: RNCC: 3 | RNVC: 2
45R: RNCC: 5 | RNVC: 1

11 Jun 1991

5110-99-611-7442
Cutter Land

996117442
NO PRIMARY REF 99-611-7442: RNCC: 3 | RNVC: 2
7579: RNCC: 5 | RNVC: 2
O273-7579: RNCC: 6 | RNVC: 9

29 Oct 2002

5110-15-165-4241
Coltello A Lama Fis

151654241
2035159: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-138-1330
Firmer Gouge

991381330
DEF STAN 51-11:PART 27: RNCC: 4 | RNVC: 1
BS1943: RNCC: 4 | RNVC: 1
58R40023: RNCC: 6 | RNVC: 9
BS1943-TABLE 3A: RNCC: 6 | RNVC: 9
TABLE 3A: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-726-3766

5110-99-736-9882

5110-99-469-5399

5110-99-138-8751
Tube Burring Tool

5110-12-126-2105
Bearing Scraper

121262105
TL5110-0035-050: RNCC: 2 | RNVC: 2
53715-200: RNCC: 5 | RNVC: 9
5353-200: RNCC: 5 | RNVC: 9
53715200: RNCC: 5 | RNVC: 9
575A052-200: RNCC: 5 | RNVC: 9
598-200: RNCC: 5 | RNVC: 9
TK5110-225-050: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-551-4520
Hand Operated Wire Rope Cutter

995514520
8251550912: RNCC: 3 | RNVC: 2
065UW-021: RNCC: 6 | RNVC: 9
070DM-021: RNCC: 6 | RNVC: 9

22 Dec 2006

5110-99-942-0325
Hand Reamer

999420325
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16520: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-126-1516
Hand Reamer

121261516
NO PRIMARY REF 12-126-1516: RNCC: 3 | RNVC: 2
22-5DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-607-0898
File Holder

226070898
V0004B: RNCC: 3 | RNVC: 2

5 May 2004

5110-99-820-0442
Hand Metal Cutting Shears

998200442
NO PRIMARY REF 99-820-0442: RNCC: 3 | RNVC: 2
KT-103-117: RNCC: 5 | RNVC: 2

26 Jun 2012

5110-66-150-5216
Knife Blade

661505216
NO PRIMARY REF 66-150-5216: RNCC: 3 | RNVC: 2
07195400: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-99-428-1690
Rec For Tool Cutter

994281690
NO PRIMARY REF 99-428-1690: RNCC: 3 | RNVC: 2
0AS2415A2: RNCC: 5 | RNVC: 2
517364: RNCC: 6 | RNVC: 9

19 Mar 1990

5110-66-150-2349
Scraping Knife

661502349
NO PRIMARY REF 66-150-2349: RNCC: 3 | RNVC: 2
07194304: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-12-309-3540
Hand Reamer

123093540
DIN206-B4,42H8-HSS: RNCC: 2 | RNVC: 2

19 Jan 1987

5110-15-237-0655
Seghetto Per Legno

152370655
311-10-U13/14-HP: RNCC: 3 | RNVC: 2
511015E097871: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-33-202-1178
Electricians' Scissors

332021178
160: RNCC: 3 | RNVC: 2
846.122: RNCC: 3 | RNVC: 2

16 Jan 2003

5110-25-140-9737

5110-22-303-5295

5110-25-119-9373
Hand File Set

5110-98-854-7657
Poppet Valve Lapper

5110-25-119-9135

5110-25-127-0105

5110-99-604-9288
Reamer

5110-25-103-5160

5110-17-110-7382
Hand Ruimer

5110-15-186-4602
Serie Chiavi A Rull

151864602
112N: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-787-6852
Single Bit Axe

997876852
BS2945: RNCC: 4 | RNVC: 1
AX60BS/3X/Y (OTAI): RNCC: 5 | RNVC: 2
D/NSC/ES394/088/1/92: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-532-3447
Hand Reamer

995323447
42733-103: RNCC: 3 | RNVC: 2
42733-103-2: RNCC: 5 | RNVC: 2
H474-285594: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-639-5026
Woodworking Butt Chisel

216395026
60C: RNCC: 3 | RNVC: 1
60: RNCC: 3 | RNVC: 1
16-624: RNCC: 3 | RNVC: 2
108BC: RNCC: 3 | RNVC: 2

6 Jun 1968

Load More Results