What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 53 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 53of 112

5110-15-173-5800
Lama Facom Per Tagl

151735800
845.L1: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-12-340-7304
Compass Saw Blade

123407304
333A: RNCC: 3 | RNVC: 2
JD142B: RNCC: 5 | RNVC: 2

31 May 1996

5110-15-208-4665
Fustella Per Guarni

152084665
3FANGRF031: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-126-1168
Tagliadischi Stanle

151261168
04-418: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-614-5314

5110-25-143-4172
Spesial Kniv

251434172
TG-1008: RNCC: 3 | RNVC: 2

26 Nov 1993

5110-12-162-1313
Hand File

121621313
DIN7263-F300-1: RNCC: 2 | RNVC: 2
1158300: RNCC: 3 | RNVC: 2
1158-300-1: RNCC: 3 | RNVC: 2
F300-1DIN7263: RNCC: 5 | RNVC: 2
DIN7263F300-1: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-264-5456
Turnover Adaptor

992645456
HU24549-2: RNCC: 3 | RNVC: 2

18 Apr 2002

5110-12-336-0881
Schnee Schne Saege

123360881
TK8465-016-21: RNCC: 2 | RNVC: 2
360/55/21: RNCC: 3 | RNVC: 2
TK-BA24-8465-042-BILD21: RNCC: 5 | RNVC: 9

20 Oct 1994

5110-99-432-8850

5110-99-432-8857

5110-99-432-8799

5110-15-123-8851
Taglierino

151238851
1770: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-428-7603
Chisel And Gouge Handle

994287603
BS1943: RNCC: 4 | RNVC: 1
F1FA14371: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-33-203-0122
Hand Metal Cutting Shears

332030122
762100 260MM: RNCC: 3 | RNVC: 2

8 Jan 2004

5110-15-219-4644
Filiera Tonda Din22

152194644
165T615-1/8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-126-1509
Hand Reamer

121261509
NO PRIMARY REF 12-126-1509: RNCC: 3 | RNVC: 2
16-2DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-832-8400
Access Pierc Pliers

998328400
QT-100: RNCC: 3 | RNVC: 2
QT-100: RNCC: 5 | RNVC: 2

31 Mar 1998

5110-20-003-8313
Hand Operated Cable Cutter Blade

200038313
10658684-001PEG: RNCC: 3 | RNVC: 2

9 Jan 2008

5110-99-991-0015
Hand Reamer

999910015
B100: RNCC: 3 | RNVC: 1
BS328 PART 4: RNCC: 3 | RNVC: 1
B100 3/16IN.: RNCC: 5 | RNVC: 2

17 Mar 1999

5110-99-206-1402

5110-12-135-4922
Hand Reamer

121354922
DIN859-A5-HSS: RNCC: 2 | RNVC: 2
11605-5: RNCC: 3 | RNVC: 2
5DIN859SCHNELLARBEITSSTAHL: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-213-3267
Lima Piatta Paralle

152133267
1-100-08-1-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-309-0779
Hand File

123090779
2403-160-2: RNCC: 3 | RNVC: 2
2192162: RNCC: 3 | RNVC: 2
2192-160-2: RNCC: 5 | RNVC: 2
51402203: RNCC: 5 | RNVC: 2

11 Dec 1986

5110-21-816-6400
Dimpling Die

218166400
ZT2963-#10: RNCC: 3 | RNVC: 2
ZT2963-10: RNCC: 5 | RNVC: 2

28 Aug 1964

5110-12-393-6794
Knife Blade

123936794
4100002-201050.002: RNCC: 3 | RNVC: 2

1 Oct 2013

5110-22-304-0487
Hss Haand Rival

223040487
V3505-6: RNCC: 6 | RNVC: 9

19 Oct 1974

5110-15-165-3722
Spazzola Rotativa A

151653722
96624015: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-213-5538
Cutter Automatico F

152135538
8211903: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-137-8569
Pialla A Sponderuol

151378569
5838/2: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-14-578-5850
Tube Cutter

145785850
006.050.110: RNCC: 3 | RNVC: 2
5705499000061: RNCC: 5 | RNVC: 2

11 Dec 2013

5110-21-105-1178
Hand File

211051178
39GP30: RNCC: 4 | RNVC: 1
GGGF325: RNCC: 4 | RNVC: 1
REVB: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-15-004-9157
Scalpello Ottogonal

150049157
77002: RNCC: 3 | RNVC: 2

9 Dec 2013

5110-14-563-3450
Knife Blade Handle

145633450
RD-AC-1004: RNCC: 3 | RNVC: 2
10317396: RNCC: 6 | RNVC: 9

28 Jan 2010

5110-14-324-7358

5110-12-139-5741

5110-12-148-5990
Hand Reamer

121485990
NO PRIMARY REF 12-148-5990: RNCC: 3 | RNVC: 2
101319: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-318-2710
Hand Cable Stripper

123182710
CX-202: RNCC: 3 | RNVC: 2
2500: RNCC: 5 | RNVC: 2
COREX CRVB: RNCC: 5 | RNVC: 2
2500: RNCC: 5 | RNVC: 2
CRVB: RNCC: 5 | RNVC: 9

26 Jun 1989

5110-15-208-5334
Pettine Filettare M

152085334
4PESDC1-7X0-35: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-016-0194
Ladies' Scissors

660160194
W716: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-66-122-8210
Pipe Cutter

5110-12-121-2356
Single Bit Ax Handle

121212356
DIN7295-B900: RNCC: 2 | RNVC: 2
18-900: RNCC: 3 | RNVC: 2
B900DIN7295: RNCC: 5 | RNVC: 2
DIN7295B900: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-442-6785
Electricians' Scissors

994426785
TL-502-249: RNCC: 3 | RNVC: 2

28 Nov 2007

5110-21-639-6251
Smooth Plane

216396251
12-003: RNCC: 3 | RNVC: 2
3B: RNCC: 5 | RNVC: 2
H1203: RNCC: 5 | RNVC: 9
5110-0911: RNCC: 5 | RNVC: 9
3: RNCC: 5 | RNVC: 9
3C: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-21-849-8260
Hand File

218498260
39GP53: RNCC: 4 | RNVC: 1
5110-0691: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-99-663-5597
Guide Reamer

5110-27-019-2817
Impact Numbering Machine

270192817
10131KR0041: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-99-977-3113

5110-99-614-2947
Hand Reamer

5110-17-029-6908
Hand Reamer

170296908
K8-9: RNCC: 3 | RNVC: 2
K8-9: RNCC: 5 | RNVC: 9
K8-9: RNCC: 6 | RNVC: 9
K8T0T9: RNCC: 6 | RNVC: 9

15 May 1970

5110-15-184-7375
Raspa Per Falegname

151847375
3RFLMZCNMDN406-4: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-136-0402
Trapano A Mano A Du

151360402
1200-2: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-208-2426
Pettine

152082426
4PERSDC4X0-7: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-014-4045
Flexible Carbon Scraper

660144045
CS-1: RNCC: 3 | RNVC: 2
7515: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5110-15-183-2502
Scalpello

151832502
2607019050: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-13-103-2494
Hand Metal Cutting Shears

131032494
5412: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-98-107-7173
Hand Reamer

981077173
PARALLEL1-3/16X5-1/2X11IN.: RNCC: 3 | RNVC: 2

10 Feb 1984

5110-12-132-1892
Hand Reamer

121321892
DIN206-B10-HSS: RNCC: 2 | RNVC: 2
301-FORM B-10: RNCC: 3 | RNVC: 2
F1131-10: RNCC: 3 | RNVC: 2
10DIN206SSSPIRALGENUTET: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-201-2934
Gouge Rainette Pour

142012934
NO PRIMARY REF14-201-2934: RNCC: 3 | RNVC: 2
G0UGERAINETTEP0URCA0UTCH0UC: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-99-204-5585

5110-15-123-2170
Scalpello Per Faleg

151232170
8254-22: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-125-4541
Tagliavetro

151254541
ART-911: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-570-0400
Fuel Off Take Tool

995700400
HU31786/1: RNCC: 3 | RNVC: 2

9 Jan 2003

5110-21-851-3659
Hand File

218513659
REDTANG: RNCC: 3 | RNVC: 1
5110-0433: RNCC: 6 | RNVC: 9

6 Oct 1968

5110-99-471-6583
Pad Saw Blades

994716583
KT-103-126: RNCC: 3 | RNVC: 2

27 Jun 2012

5110-99-799-4794
Punch

997994794
CH.749-292: RNCC: 3 | RNVC: 2
CH749-292: RNCC: 5 | RNVC: 2

14 Sep 1989

5110-98-104-7287
Hand File

981047287
NO PRIMARY REF 98-104-7287: RNCC: 3 | RNVC: 2
12 ASSORTED CUT 2: RNCC: 5 | RNVC: 2

1 Jun 1990

5110-66-149-8806
Hand Deburring Tool

661498806
FLEXI-BURR: RNCC: 3 | RNVC: 2
LB1000: RNCC: 5 | RNVC: 2
02517155: RNCC: 5 | RNVC: 2

10 Apr 2003

5110-21-876-0387
Hand Masonry Drill

218760387
MT1006: RNCC: 3 | RNVC: 1
5133-3320: RNCC: 6 | RNVC: 9

21 Jun 1977

5110-99-910-9969
Hand Reamer

999109969
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16227: RNCC: 6 | RNVC: 9
10127: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-383-3457
Hand Reamer

123833457
690.211.00.1: RNCC: 3 | RNVC: 2

8 Oct 2010

5110-15-136-2142
Serie Lime Ad Ago M

151362142
2645: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-192-8602
Cutter

151928602
L-2: RNCC: 3 | RNVC: 2

26 Mar 2010

5110-15-184-7345
Bedano Da Falegname

151847345
3QANFLM7: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-25-117-6612
Isbor Skjaer

251176612
416: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-66-150-0000
Spokeshave

661500000
NO PRIMARY REF 66-150-0000: RNCC: 3 | RNVC: 2
07460106: RNCC: 5 | RNVC: 2

11 Apr 2003

5110-15-208-4600
Alesatori Conici Da

152084600
3AAWFPCNDN2-9X4-16: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-303-2308
Circle Cutter

123032308
NO PRIMARY REF 12-303-2308: RNCC: 3 | RNVC: 2
5560BSS200: RNCC: 5 | RNVC: 9

7 Mar 1985

5110-99-910-5575
Tinner's Hollow Cutting Punch

999105575
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
F1FA15988: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
DL9A-H1904: RNCC: 6 | RNVC: 9
H1904: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-466-9027
Flat Dimpling Punch

994669027
NO PRIMARY REF 99-466-9027: RNCC: 3 | RNVC: 2
W62061: RNCC: 5 | RNVC: 9
1C7029: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-851-2317
Firmer Gouge

218512317
MS16549-6: RNCC: 2 | RNVC: 2
85: RNCC: 3 | RNVC: 1
330: RNCC: 3 | RNVC: 1
5110-0738: RNCC: 5 | RNVC: 9
1F67100: RNCC: 5 | RNVC: 9

6 Oct 1968

5110-12-343-9260
Hand Metal Cutting Shears

123439260
745-250: RNCC: 3 | RNVC: 2
1626: RNCC: 3 | RNVC: 2
11626025021: RNCC: 5 | RNVC: 2

14 Aug 1997

5110-14-201-1123
Single Bow Cutting Punch

142011123
4637-4: RNCC: 3 | RNVC: 2
153-4: RNCC: 3 | RNVC: 9
107-4: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-98-205-7217
File Combinat Guage

982057217
505 69 81-07: RNCC: 3 | RNVC: 2

15 Feb 2002

5110-15-213-0241
Segaccio A Mano Con

152130241
ART.7850: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-814-6440
Dimpling Die

218146440
ZT1853-3/16: RNCC: 3 | RNVC: 2
ZT1853-3-16: RNCC: 5 | RNVC: 2

13 Jun 1964

5110-12-372-8192
Hand File

123728192
COR860-150MM-H0: RNCC: 3 | RNVC: 2
4007220304204: RNCC: 5 | RNVC: 2

23 Aug 2007

5110-21-889-5850
Hand Hacksaw Blade

218895850
30E-1032: RNCC: 3 | RNVC: 2

18 Jul 1982

5110-20-010-6776

5110-22-270-2189

5110-25-117-2510
Hand Cold Chisel

5110-21-639-4175

5110-22-270-2176

5110-13-108-0887
Craftsman's Knife

131080887
643-4511: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-15-126-1462
Raschietto Per Meta

151261462
3274-2-255: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-126-1466
Hand Reamer

121261466
NO PRIMARY REF 12-126-1466: RNCC: 3 | RNVC: 2
29DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-840-0084
Hand Reamer

218400084
NO PRIMARY REF 21-840-0084: RNCC: 3 | RNVC: 2

26 Mar 1965

5110-13-102-8803
Hand File

131028803
NBN496A3-100B1: RNCC: 2 | RNVC: 2

1 Apr 1975

5110-25-125-0410

5110-25-112-6088
Handsaw Jointer

5110-21-868-1785

5110-12-126-2493
Bucksaw Blade

121262493
NO PRIMARY REF 12-126-2493: RNCC: 3 | RNVC: 2
DIN7245-E530X6: RNCC: 5 | RNVC: 9
DIN7245E530X6: RNCC: 5 | RNVC: 9
E530X6DIN7245: RNCC: 5 | RNVC: 9
53-6-600: RNCC: 5 | RNVC: 9
53-8-600: RNCC: 5 | RNVC: 9

30 May 1969

5110-98-854-7658
Hand Powered Poppet Valve Lapper

988547658
NO PRIMARY REF 98-854-7658: RNCC: 3 | RNVC: 2
317-27: RNCC: 5 | RNVC: 2

5 May 1981

5110-15-215-4247
Tronchese Pastorino

152154247
341IS: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-33-102-1997

5110-22-609-3711
Hand Reamer

226093711
501A-11-32: RNCC: 3 | RNVC: 2

19 Jan 2005

5110-15-199-0745
Double Bow Cutting Punch

151990745
3703-11: RNCC: 3 | RNVC: 2
C3703-11: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-99-645-0902
Hand Reamer

996450902
WD01-10-90013WWS66F: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-14-244-7994
Pliers

142447994
60-35-16CHR0MEE: RNCC: 3 | RNVC: 2
618-49-09-13: RNCC: 5 | RNVC: 2
12505386: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-33-190-2484

5110-99-120-2175
Hand Reamer

991202175
BS3088: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
0275-16532: RNCC: 6 | RNVC: 9
9398: RNCC: 6 | RNVC: 9
1G243: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-27-014-8999
Single Bow Cutting Punch

270148999
5110ATFD0109: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-22-608-9163
Bow Saw

226089163
4.333.903.305: RNCC: 3 | RNVC: 2

1 Dec 2004

5110-99-470-6519
Crosscutti Hand Saw

994706519
1-15-335: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-98-107-7149
Hand Reamer

981077149
PARALLEL23/32X4X8IN.: RNCC: 3 | RNVC: 2

9 Feb 1984

5110-21-877-4989
Hand Reamer Set

218774989
J5830-02: RNCC: 3 | RNVC: 2

5 Apr 1978

5110-22-255-4730

5110-22-302-9041

5110-66-150-2131
Hand Hacksaw Blade

661502131
NO PRIMARY REF 66-150-2131: RNCC: 3 | RNVC: 2
06900502: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-12-185-9257
Ripping Chisel

121859257
56611010: RNCC: 3 | RNVC: 9
6893-400: RNCC: 3 | RNVC: 9
737B202-400: RNCC: 3 | RNVC: 9

8 Nov 1980

5110-12-126-1344
Jointer Plane

121261344
DIN7218-60: RNCC: 2 | RNVC: 2
101S/60: RNCC: 3 | RNVC: 2
EMM101S/60: RNCC: 5 | RNVC: 2
60DIN7218: RNCC: 5 | RNVC: 2
HW1-60: RNCC: 5 | RNVC: 9
652A101-60: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-814-5232
3 Blade Cutter

998145232
NO PRIMARY REF 99-814-5232: RNCC: 3 | RNVC: 2
457-19855: RNCC: 5 | RNVC: 2
457-19855: RNCC: 5 | RNVC: 9

8 Jun 2011

5110-41-001-8793
Hand File Set

410018793
7441-046: RNCC: 3 | RNVC: 2

17 Jan 2012

5110-25-121-6310

5110-14-573-3587
Hand Hacksaw Blade

145733587
668B.12: RNCC: 3 | RNVC: 2

8 Oct 2012

5110-12-369-1706
Hand Metal Cutting Shears

123691706
D27: RNCC: 3 | RNVC: 2
00.19.44.04: RNCC: 5 | RNVC: 2

31 May 2006

5110-15-221-9618
Lima Tonda '4'

152219618
4R: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-368-9803
Double Bow Cutting Punch

123689803
0100580: RNCC: 3 | RNVC: 2
00.09.43.70: RNCC: 5 | RNVC: 2

10 May 2006

5110-27-011-3977
Hand File

270113977
99999-NIIN-DA0037155: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-27-026-0079
Tailor's Shears

270260079
KM13: RNCC: 2 | RNVC: 1

18 May 2005

5110-15-186-3520
Levachiodi Manuale

151863520
LEVACHIODI MANUALE: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-762-8004
Pipe Cutter

997628004
174-F: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-66-014-0081
Scraping Knife

660140081
CEN 395-3: RNCC: 3 | RNVC: 2
59SCR6517-38: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-15-210-7072
Scalpello Per Mecca

152107072
C3602/4-100: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-288-5694
Diagonal Cutting Pliers

142885694
288: RNCC: 3 | RNVC: 2
1426: RNCC: 5 | RNVC: 2
288HF12PCV: RNCC: 5 | RNVC: 2
288HF12IS012: RNCC: 5 | RNVC: 2
85-681-5570: RNCC: 6 | RNVC: 9

1 Jan 1972

5110-41-000-1403
Knockout Punch And Die

410001403
617-550: RNCC: 3 | RNVC: 2

3 Aug 2006

5110-21-807-1161
Plumber's Saw Blade

218071161
NO PRIMARY REF 21-807-1161: RNCC: 3 | RNVC: 2

5 Feb 1964

5110-12-132-2354
Reamer Blade Set

121322354
101.37.400: RNCC: 3 | RNVC: 2
101-37-400: RNCC: 5 | RNVC: 2
800-27D37T045: RNCC: 5 | RNVC: 9
800-27HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-135-2966
Circle Cutter

121352966
140-200: RNCC: 3 | RNVC: 2
632B201-200-1: RNCC: 5 | RNVC: 9
5417-200: RNCC: 5 | RNVC: 9
3932-200: RNCC: 5 | RNVC: 9
108738: RNCC: 5 | RNVC: 9
5560ASS200: RNCC: 5 | RNVC: 9
5417-75: RNCC: 5 | RNVC: 9
0808391090349: RNCC: 5 | RNVC: 9
S4-6804-23: RNCC: 5 | RNVC: 9
1393995115053561: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-123-6440
Lima Con Manico Mez

151236440
2601/1-12: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-306-2021
Combination Plane

143062021
NO PRIMARY REF14-306-2021: RNCC: 3 | RNVC: 2
1645-6: RNCC: 5 | RNVC: 9

1 Jan 1974

5110-12-131-4721
Hand Reamer

121314721
141.04.000: RNCC: 3 | RNVC: 2
141-04-000: RNCC: 5 | RNVC: 2
V6-9-7-5HARTCHR0M: RNCC: 5 | RNVC: 9
200-33HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-33-206-8846
Bow Saw

332068846
1170.36100: RNCC: 3 | RNVC: 2
4534-24: RNCC: 3 | RNVC: 2
8414299084177: RNCC: 5 | RNVC: 2

29 Aug 2008

5110-99-456-2368

5110-12-313-8476
Zange Einsatz

123138476
101610-8: RNCC: 3 | RNVC: 2

11 May 1988

5110-98-205-4728
Hand Rasp

982054728
DFAMPD00176: RNCC: 2 | RNVC: 2

11 Oct 2000

5110-27-010-6682
Hand File

270106682
99999-NIIN-DA0037244: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-66-142-1596
Ship Scraper

661421596
70244: RNCC: 3 | RNVC: 2

5 Mar 1996

5110-12-126-1257
Hand File

121261257
1212200: RNCC: 3 | RNVC: 2
1212-200-3: RNCC: 3 | RNVC: 2
A200XG3DIN8332: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-230-4187
Pialla In Metallo

152304187
5858-44: RNCC: 3 | RNVC: 2
511015E089536: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-14-201-1127
Single Bow Cutting Punch

142011127
4637-8: RNCC: 3 | RNVC: 2
153-8: RNCC: 3 | RNVC: 9
107-8: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-262-8119
Tariere Torse A Vis

142628119
12-4-14: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-98-203-6660
Hand File

982036660
ROUND 350MM X 15MM DIA 2ND CUT: RNCC: 3 | RNVC: 2

2 Aug 1990

5110-33-204-3024
Double Bow Cutting Punch

332043024
2511333: RNCC: 3 | RNVC: 2
BS-33P055873: RNCC: 5 | RNVC: 2
4940-33-P05-5873: RNCC: 6 | RNVC: 9

27 Jun 2005

5110-99-273-0332
Craftsman's Knife

992730332
N70-4270: RNCC: 3 | RNVC: 2
MILLS N70-4270: RNCC: 5 | RNVC: 2

18 Mar 2010

5110-12-176-4752
Hand File Set

121764752
NO PRIMARY REF 12-176-4752: RNCC: 3 | RNVC: 2
329DT: RNCC: 5 | RNVC: 9

29 Nov 1978

5110-12-159-1193
Hand Cold Chisel

121591193
C3640-250: RNCC: 3 | RNVC: 2

30 May 1969

5110-25-100-4509
Straight Trimmers Shears

251004509
NO PRIMARY REF25-100-4509: RNCC: 3 | RNVC: 2
53-8929-500-090: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-15-125-6833
Lima Per Meccanica

151256833
2561/1-14: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-226-7438
Hand Masonry Drill

142267438
NO PRIMARY REF14-226-7438: RNCC: 3 | RNVC: 2
2402-9-5: RNCC: 5 | RNVC: 9

1 Jan 1966

5110-15-233-0773
Scalpelli Per Legno

152330773
1-16-797: RNCC: 3 | RNVC: 2
511015E097867: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-25-119-5344
Diagonal Cutting Pliers

251195344
2112-4: RNCC: 3 | RNVC: 1
71211240: RNCC: 3 | RNVC: 2
2121-125: RNCC: 3 | RNVC: 2
3142-195-1: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-17-701-4746
Hand Reamer

177014746
9-25H7DIN206SS: RNCC: 2 | RNVC: 1
586-9-25: RNCC: 3 | RNVC: 2
DIN206: RNCC: 4 | RNVC: 1

14 May 1970

5110-12-194-1259
Hand Reamer

121941259
DIN9-B10: RNCC: 2 | RNVC: 2
501-FORM B-10: RNCC: 3 | RNVC: 2
DIN9B10: RNCC: 5 | RNVC: 9
16120-10: RNCC: 5 | RNVC: 9
B10DIN9: RNCC: 5 | RNVC: 9

5 Oct 1982

5110-22-121-8939
Crosscut Hand Saw

221218939
291-22: RNCC: 3 | RNVC: 2
299-22: RNCC: 3 | RNVC: 2

3 Dec 1992

5110-22-100-2951

5110-21-111-9758

5110-99-719-8795

5110-21-868-0542
Scraper

218680542
7044-69B: RNCC: 3 | RNVC: 2

14 Jul 1972

5110-14-254-3209
Diagonal Cutting Pliers

142543209
287-S: RNCC: 3 | RNVC: 2
287S: RNCC: 3 | RNVC: 2
3272670211940: RNCC: 5 | RNVC: 2
1427: RNCC: 5 | RNVC: 2
85-684-8980: RNCC: 6 | RNVC: 9

1 Jan 1969

5110-25-148-1908
Monteringsverktoey

251481908
2 0027-041: RNCC: 3 | RNVC: 2

8 Jul 1999

5110-15-123-6444
Lima Con Manico Ton

151236444
2602/2-12: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-98-102-2149
Hand Hacksaw Frame

981022149
ER106 TURNER: RNCC: 3 | RNVC: 2
1700 RABON: RNCC: 3 | RNVC: 2
5110-01-040-8943: RNCC: 6 | RNVC: 9
20T ECLIPSE: RNCC: 6 | RNVC: 9

1 Jun 1990

5110-15-193-2722
Tranciafuni Multius

151932722
1389/UI-VEST: RNCC: 2 | RNVC: 9
FX-026900: RNCC: 3 | RNVC: 2
(241)AG180FX-026900: RNCC: 5 | RNVC: 2

26 Apr 2010

5110-66-013-6110
Hand Masonry Drill Holder

660136110
DRILLH0LDERS: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-15-235-9401
Tronchese Mm.112

152359401
0166045110: RNCC: 3 | RNVC: 2
511015E121663: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-210-4793
Fustella

152104793
EX5110RN0406433: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-142-3342
Hand Hacksaw Frame

661423342
621-641: RNCC: 3 | RNVC: 2

1 Jun 1996

5110-14-244-0855

5110-15-208-4991
Scalp. Da Fabb. Ad

152084991
3SANMMPUZ150X10: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-025-8899
Hand File Set

660258899
0753 7806: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-15-212-3456
Utensile Brasato

152123456
C2-60-07-M.3: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-17-123-8069
Hand Hacksaw Blade

171238069
0-15-277: RNCC: 3 | RNVC: 2

7 Jul 2011

5110-15-134-5608
Lame Ricambio Per C

151345608
2040-2: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-99-733-8949
Hand File Set

997338949
NO PRIMARY REF 99-733-8949: RNCC: 3 | RNVC: 2
521-908: RNCC: 5 | RNVC: 2
SPSCM/PO/1329: RNCC: 6 | RNVC: 9

27 Apr 2010

5110-66-149-9390
Craftsman's Knife

661499390
NO PRIMARY REF 66-149-9390: RNCC: 3 | RNVC: 2
04389865: RNCC: 5 | RNVC: 2

10 Apr 2003

5110-66-017-2223
Hollow Punch Handle

660172223
1900-10: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-99-910-4244
Paring Chisel

999104244
DEFSTAN51-11 PART 27: RNCC: 4 | RNVC: 1
DL9A-H429: RNCC: 5 | RNVC: 9
DL9A: RNCC: 5 | RNVC: 9
H429: RNCC: 6 | RNVC: 9
FA11334: RNCC: 6 | RNVC: 9
H429: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-309-0754
Hand File

123090754
2122163: RNCC: 3 | RNVC: 2
2406-160-3: RNCC: 3 | RNVC: 2
2122-160-3: RNCC: 5 | RNVC: 2

11 Dec 1986

5110-21-814-1234
Die Dimpling Ram

218141234
ZT186302-#8: RNCC: 3 | RNVC: 2
ZT186302-8: RNCC: 5 | RNVC: 2

13 Jun 1964

5110-25-103-4709
File Handle

251034709
1SBF5110HVK8: RNCC: 2 | RNVC: 1
FS 5110-0418 POS 3: RNCC: 2 | RNVC: 2
120F: RNCC: 3 | RNVC: 2
10100545: RNCC: 3 | RNVC: 2
U19-2-130: RNCC: 5 | RNVC: 2
211036-9: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-12-126-1450
Hand Reamer

121261450
NO PRIMARY REF 12-126-1450: RNCC: 3 | RNVC: 2
13DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-224-1015
Opticia Pillar File

992241015
NO PRIMARY REF 99-224-1015: RNCC: 3 | RNVC: 2
4B01670: RNCC: 5 | RNVC: 2

3 Jul 1989

5110-14-280-2039
Poincon De Macon

142802039
NO PRIMARY REF14-280-2039: RNCC: 3 | RNVC: 2
686-45: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-12-126-1297
File Handle

121261297
DIN395-160: RNCC: 2 | RNVC: 2
160DIN395: RNCC: 5 | RNVC: 2

30 May 1969

5110-15-214-2437
Cacciavite Isolato

152142437
USAG 2,5X5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-3827
Alesatore

152083827
3AAXFCFRDP20-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-639-4255
Hand File

216394255
903665: RNCC: 3 | RNVC: 2
39GP30: RNCC: 4 | RNVC: 1
6Q38030-10: RNCC: 5 | RNVC: 9

1 Feb 1965

5110-12-170-5732
Hand Reamer

121705732
101.45.000: RNCC: 3 | RNVC: 2
90 991 1802: RNCC: 5 | RNVC: 2
13212017: RNCC: 5 | RNVC: 9
101-45-000: RNCC: 5 | RNVC: 9

20 Jul 1977

5110-21-899-4794
Dimpling Punch

218994794
ZT2065-1/4-28: RNCC: 3 | RNVC: 2
ZT2065-1-4-28: RNCC: 5 | RNVC: 2

12 Aug 1985

5110-12-181-0562
End Cutting Nippers

121810562
TL5110-0025-040: RNCC: 2 | RNVC: 2
1393212117264019: RNCC: 5 | RNVC: 9
0808393322879: RNCC: 5 | RNVC: 9
TGL 12595,HEGW,120,OB 019: RNCC: 5 | RNVC: 9
DIN5252-B110-H: RNCC: 5 | RNVC: 9

22 Oct 1979

5110-15-210-5169
Coltello Da Combatt

152105169
ART28185: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-4823
Alesatore Cilin.Tip

152084823
3AAXFCFRDP6: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-244-0762

5110-15-165-3979
Prisma Di Controllo

151653979
4332: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-13-103-0086
Firmer Chisel

131030086
B325-326-35: RNCC: 3 | RNVC: 9

1 Apr 1975

5110-99-284-6920
Hand Operated Wire Rope Cutter

992846920
NO PRIMARY REF 99-284-6920: RNCC: 3 | RNVC: 2
3744: RNCC: 5 | RNVC: 2
5749-0151: RNCC: 5 | RNVC: 2
725-4350: RNCC: 5 | RNVC: 2

22 Apr 2010

5110-12-183-0383
Bohrsaege

121830383
3327-4: RNCC: 3 | RNVC: 9
4769-1GR4: RNCC: 5 | RNVC: 9
5936GR4: RNCC: 5 | RNVC: 9
3327GR4: RNCC: 5 | RNVC: 9

13 Mar 1980

5110-22-607-3266
Hand File

226073266
8019846: RNCC: 3 | RNVC: 2
1-160-08-1-0: RNCC: 3 | RNVC: 2

8 Jun 2004

5110-15-124-8210
Spazzola A Pennello

151248210
4012-11-10: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-338-0174
Hand Reamer

123380174
100.13.000: RNCC: 3 | RNVC: 2
TYPE:D-13,5-15,5MM: RNCC: 5 | RNVC: 2

11 May 1995

5110-99-254-4345
Dimpling Die

992544345
2-S200F-1: RNCC: 3 | RNVC: 2
2-S200F: RNCC: 5 | RNVC: 1
1C-8741: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-17-110-7350
Hand Reamer

171107350
P926-0,1250: RNCC: 3 | RNVC: 2
P926-: RNCC: 6 | RNVC: 9

18 Feb 1997

5110-22-610-1766
Hand File

226101766
1-160-08-1-2: RNCC: 3 | RNVC: 2

15 Apr 2005

5110-22-274-9087
Bolt Cutter

222749087
731151: RNCC: 3 | RNVC: 2

19 Apr 1999

5110-25-145-6950
Isbor Skjaer

251456950
501382500: RNCC: 5 | RNVC: 2

6 Oct 1995

5110-98-105-8781

5110-98-105-8749

5110-25-138-4986
Diagonal Cut Pliers

5110-25-200-1346
Hand Graver

5110-99-488-7683
Hand Operated Cable Cutter

994887683
NO PRIMARY REF 99-488-7683: RNCC: 3 | RNVC: 2
548-164: RNCC: 5 | RNVC: 2
NSA038-324: RNCC: 5 | RNVC: 2
SPCISR/10/2/43/5/1: RNCC: 6 | RNVC: 9
060W5-0072: RNCC: 6 | RNVC: 9

15 Mar 2006

5110-66-150-5215
Knife Blade

661505215
NO PRIMARY REF 66-150-5215: RNCC: 3 | RNVC: 2
07657702: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-32-001-0371
Diagonal Cutting Pliers

320010371
NO PRIMARY REF 32-001-0371: RNCC: 3 | RNVC: 2
03441V: RNCC: 5 | RNVC: 9

4 Oct 1976

5110-12-314-1141
Bow Saw Blade

123141141
6151-530: RNCC: 3 | RNVC: 2
1725351: RNCC: 5 | RNVC: 2

8 Jun 1988

5110-15-143-4000
Utensile Da Tornio

151434000
777-14-12: RNCC: 3 | RNVC: 2
777/14-12: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-99-382-4864
Hand File Set

993824864
KEN-033-0500K: RNCC: 3 | RNVC: 2

26 Feb 2010

5110-15-002-4740
Reamer

150024740
34004-01-2493: RNCC: 3 | RNVC: 2

29 Aug 2013

5110-98-104-6905
Knife Blade Handle

981046905
NO PRIMARY REF 98-104-6905: RNCC: 3 | RNVC: 2
10: RNCC: 5 | RNVC: 2

1 Jun 1990

5110-98-105-8693
Hand Reamer

981058693
NO PRIMARY REF 98-105-8693: RNCC: 3 | RNVC: 2
METRIC 2050-14.0: RNCC: 5 | RNVC: 2

18 May 1978

5110-99-277-5844
Fireman's Strap Cutting Knife

992775844
NO PRIMARY REF 99-277-5844: RNCC: 3 | RNVC: 2
AR/003: RNCC: 5 | RNVC: 2
5749-0150: RNCC: 5 | RNVC: 2

28 Aug 2008

5110-27-010-6699
Hand File

270106699
99999-NIIN-DA0037220: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-32-001-0430
Hand File

320010430
1-110-08-3-3: RNCC: 3 | RNVC: 2

19 Sep 1976

5110-98-200-9274
Reamer Blade Set

982009274
NO PRIMARY REF 98-200-9274: RNCC: 3 | RNVC: 2
ST 4: RNCC: 5 | RNVC: 2

20 Feb 1987

5110-20-006-0579
Diagonal Cutting Pliers

200060579
58-4587-4: RNCC: 3 | RNVC: 2

17 Jan 2011

5110-99-975-7403
Pocket Knife

999757403
UK/CIS/1974-1287: RNCC: 2 | RNVC: 2
1287: RNCC: 6 | RNVC: 9
CC1287: RNCC: 6 | RNVC: 9
1-301-47408: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-336-7441
Hand Cold Chisel

123367441
4990032-000.01: RNCC: 3 | RNVC: 2
MAGERD G496: RNCC: 5 | RNVC: 9

19 Dec 1994

5110-27-010-6664
Hand File

270106664
99999-NIIN-DA0037213: RNCC: 2 | RNVC: 1
31985C: RNCC: 2 | RNVC: 1
31985C: RNCC: 5 | RNVC: 2

18 Jun 2002

5110-25-105-1651

5110-27-010-6597
Hand File

270106597
99999-NIIN-DA003723: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-27-010-6668
Hand File

270106668
99999-NIIN-DA0037182: RNCC: 2 | RNVC: 1
41F1575: RNCC: 2 | RNVC: 1
60270002: RNCC: 2 | RNVC: 1
60270002: RNCC: 5 | RNVC: 2

18 Jun 2002

5110-99-604-9149
Hand Reamer

5110-12-377-2059
Hand Cold Chisel

123772059
061652: RNCC: 3 | RNVC: 2

17 Dec 2008

5110-23-113-9198
Nipper

231139198
59900068: RNCC: 3 | RNVC: 2

12 Jun 2004

5110-27-010-7455
Hand Reamer

270107455
99999-NIIN-DA0036196: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-98-107-7160
Hand Reamer

981077160
PARALLEL57/64X4-1/2X9IN.: RNCC: 3 | RNVC: 2

10 Feb 1984

5110-98-207-3599
Hand Operated Cable Cutter

982073599
HN-318-C: RNCC: 3 | RNVC: 2

6 Aug 2010

5110-21-639-6551
Ratchet Drill

216396551
89-523: RNCC: 3 | RNVC: 2
4: RNCC: 5 | RNVC: 1

30 Nov 1965

5110-15-208-4981
Scalpello Meccanici

152084981
3SANMMPPZ100X7: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-4998
Scalpello

152084998
3SANFLSUP10: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-394-2248
Single Bit Ax

123942248
7135616: RNCC: 3 | RNVC: 2

12 Nov 2013

5110-15-165-4087
Chiave Poligonale

151654087
25370: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-373-3855
Hand File

123733855
COR810200MMH0: RNCC: 3 | RNVC: 2
01.79.17.69: RNCC: 5 | RNVC: 2
4007220304167: RNCC: 5 | RNVC: 2
COR810-200-0: RNCC: 5 | RNVC: 2

26 Oct 2007

5110-15-233-4370
Raschietto Mm.50

152334370
59505-05/1: RNCC: 3 | RNVC: 2
511015E098277: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-12-129-2421
Coping Saw Blade

121292421
TL5110-0032-3: RNCC: 2 | RNVC: 2
51821003: RNCC: 3 | RNVC: 2
120710: RNCC: 5 | RNVC: 9
575F102-3-0: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-121-1079
Hand Cold Chisel

121211079
574B004-16: RNCC: 3 | RNVC: 2

30 May 1969

5110-21-637-4328
Hand Masonry Drill

216374328
1240-12: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-124-0761
Scalpello

151240761
8368: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-574-3908
Hand File

145743908
DRD-D200+MP1: RNCC: 3 | RNVC: 2

15 Jan 2013

5110-22-610-5591
Hand Metal Cutting Shears

226105591
8695-583-11: RNCC: 3 | RNVC: 2

1 Jun 2005

5110-21-102-7823
Wood Scraper

211027823
20: RNCC: 3 | RNVC: 1
2: RNCC: 3 | RNVC: 1
0: RNCC: 3 | RNVC: 1
28-035: RNCC: 3 | RNVC: 2
0HS: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-12-369-1902
Hand Bull Point Chisel

123691902
DIN7256-250: RNCC: 2 | RNVC: 2
3739-250: RNCC: 3 | RNVC: 2
330 250 1: RNCC: 3 | RNVC: 2
00.06.73.91: RNCC: 5 | RNVC: 2

1 Jun 2006

5110-99-910-5923
Hand Bench Shears

999105923
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 6 | RNVC: 9
DL9A-H2342: RNCC: 6 | RNVC: 9
H2342: RNCC: 6 | RNVC: 9
FA16880: RNCC: 6 | RNVC: 9
H2342: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-22-610-9593
Hand File

226109593
1-230-08-2-2: RNCC: 3 | RNVC: 2

11 Jul 2005

5110-12-173-2311
Diagonal Cutting Pliers

121732311
NO PRIMARY REF 12-173-2311: RNCC: 3 | RNVC: 2
106657: RNCC: 5 | RNVC: 9
2685: RNCC: 5 | RNVC: 9

29 Mar 1978

5110-17-056-7206
Rescue Knife Sheath

170567206
RN-2LF: RNCC: 3 | RNVC: 2

4 Oct 2007

5110-12-189-6054
Hand Reamer

121896054
NO PRIMARY REF 12-189-6054: RNCC: 3 | RNVC: 2
2370/9: RNCC: 5 | RNVC: 9

7 Oct 1981

5110-14-274-7911
Scie A Montur Lame

142747911
E73-027ATEN0NS800X55: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-66-149-5109
Knife Blade

661495109
NO PRIMARY REF 66-149-5109: RNCC: 3 | RNVC: 2
D-803: RNCC: 5 | RNVC: 2

4 Apr 2003

5110-14-287-8392
Hand Metal Stamping Die

142878392
NT92-01JUIN51P0INC0N2-3MM: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-287-8392: RNCC: 3 | RNVC: 2
NT92-01JUIN51P0INC0N2-3MM: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-15-186-0039
Is Cesoia Per Cavi

151860039
297-2036: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-604-7388
Bolt Knockout Cap

5110-99-874-2096

5110-99-874-2105

5110-22-274-3684
File Hand

222743684
30 - 12IN FIN: RNCC: 3 | RNVC: 2

2 Feb 1977

5110-15-214-2564
Spatula

152142564
SPTL: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-136-2705
Coltello Per Elettr

151362705
41490: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-12-146-5153

5110-66-149-3479
Pocket Scissors

661493479
NO PRIMARY REF 66-149-3479: RNCC: 3 | RNVC: 2
975450: RNCC: 5 | RNVC: 2

3 Apr 2003

5110-98-201-5367
Keyhole Saw Blade

982015367
NO PRIMARY REF 98-201-5367: RNCC: 3 | RNVC: 2
15-276: RNCC: 5 | RNVC: 2

11 Nov 1987

5110-27-046-4910
Diagonal Cutting Pliers

270464910
3700 16 3160: RNCC: 2 | RNVC: 1
58RS505391: RNCC: 5 | RNVC: 9

21 Aug 2009

5110-12-306-4021
Tube Cutter

123064021
7.0285: RNCC: 3 | RNVC: 2
7.0095: RNCC: 5 | RNVC: 9

26 Feb 1986

5110-12-122-2552
Hand Reamer

121222552
9: RNCC: 3 | RNVC: 2

30 May 1969

5110-14-273-7541
End Cutting Nippers

142737541
E73-111-140: RNCC: 2 | RNVC: 2
188-13CH: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-12-126-4897
Dovetail Saw

121264897
DIN7235-A: RNCC: 2 | RNVC: 2
125-250: RNCC: 3 | RNVC: 2
ADIN7235: RNCC: 5 | RNVC: 2
1352501: RNCC: 5 | RNVC: 2
106-250: RNCC: 5 | RNVC: 9
DIN7235A: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-061-1204
Knife Blade

660611204
1991: RNCC: 3 | RNVC: 2
0-11-911: RNCC: 3 | RNVC: 2
1991: RNCC: 3 | RNVC: 2

22 Jul 1973

5110-21-903-3305
Single Bit Ax

219033305
HU-1 1/4-14: RNCC: 3 | RNVC: 2
HUN 12514: RNCC: 3 | RNVC: 2
101214: RNCC: 3 | RNVC: 2
13-006A03: RNCC: 3 | RNVC: 2
13-006A03: RNCC: 3 | RNVC: 2
HU-1 1/4-14: RNCC: 5 | RNVC: 9

14 May 1988

5110-12-126-3374
Broad Hatchet

121263374
NO PRIMARY REF 12-126-3374: RNCC: 3 | RNVC: 2
2-50DIN8371: RNCC: 5 | RNVC: 2
1200-350: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-139-9126
Scalpello A Sez.Ner

151399126
531/150: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-66-123-1504
End Cutting Nippers

661231504
28232: RNCC: 3 | RNVC: 2
2965-5: RNCC: 5 | RNVC: 9

12 Sep 1985

5110-12-126-1631
Hand File

121261631
2407-100-3: RNCC: 3 | RNVC: 2
2132103: RNCC: 3 | RNVC: 2
E50X3DIN8342: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-432-8973

5110-99-432-8981

5110-99-432-8485
Rigid Handl Machete

5110-99-432-8783

5110-99-432-9029

5110-15-117-7963
Reamer

151177963
P-175502-401/402-12C001-1004: RNCC: 3 | RNVC: 2
P175502-401/402-12C001-1004: RNCC: 5 | RNVC: 2

28 Jan 1994

5110-12-140-2681
Hand File

121402681
TL5110-0036-720: RNCC: 2 | RNVC: 2
1172-250-3: RNCC: 3 | RNVC: 2
DIN7261-G250-3: RNCC: 5 | RNVC: 1
TK5110-219-720: RNCC: 5 | RNVC: 2
1172-250-3: RNCC: 5 | RNVC: 9
3172253: RNCC: 5 | RNVC: 9
A250X3DIN8339: RNCC: 5 | RNVC: 9
DIN7261G250-3: RNCC: 5 | RNVC: 9
G250-3DIN7261: RNCC: 5 | RNVC: 9
TK-KG55-5110-219-720: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-087-1484
File Smooth Round

990871484
NO PRIMARY REF 99-087-1484: RNCC: 3 | RNVC: 2
3750056: RNCC: 5 | RNVC: 2

11 Dec 1995

5110-12-334-6139
Electricians' Scissors

123346139
45-123: RNCC: 3 | RNVC: 2

30 May 1994

5110-17-029-0423
Rectangular Cutting Punch

170290423
NO PRIMARY REF 17-029-0423: RNCC: 3 | RNVC: 2

17 Jun 1972

5110-66-149-8126
Pipe Cutter

661498126
NO PRIMARY REF 66-149-8126: RNCC: 3 | RNVC: 2
07048201: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-99-910-4963
Hand File

999104963
DEF1098: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
FA13607: RNCC: 6 | RNVC: 9
1A941: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-17-701-5819
Hand Rasp

177015819
3704: RNCC: 3 | RNVC: 2
41R242: RNCC: 6 | RNVC: 9

15 May 1970

5110-15-221-3956
Punzone Diam. 25

152213956
PUNZ0NED25: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-105-2132
Punch And Die Punch

211052132
2: RNCC: 3 | RNVC: 1
300080234: RNCC: 3 | RNVC: 2
1F38: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-15-123-6455
Lama Per Seghetto D

151236455
1728BM: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-384-8790
Gimlet

123848790
50.000.019: RNCC: 3 | RNVC: 2

6 Apr 2011

5110-21-868-1574
Bolt Cutter Jaws

218681574
0112NE: RNCC: 3 | RNVC: 2

17 Nov 1972

5110-99-910-4190
Hand Diamond Point Chisel

999104190
DEFSTAN51-11PT29: RNCC: 4 | RNVC: 1
BS3066-TABLE 6: RNCC: 4 | RNVC: 1
FA11235: RNCC: 6 | RNVC: 9
1A415: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-4202
Hand Cold Chisel

999104202
DEFSTAN51-11PT29: RNCC: 4 | RNVC: 1
BS3066-TABLE 3: RNCC: 4 | RNVC: 1
FA11250: RNCC: 6 | RNVC: 9
FA11261: RNCC: 6 | RNVC: 9
9104202: RNCC: 6 | RNVC: 9
1A3830: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-143-4028
Coltelli Per Elettr

151434028
7145-3: RNCC: 3 | RNVC: 2
7145/3: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-15-136-3143
Tronchese Per Elett

151363143
1798/3: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-22-222-0635
Embroidery Scissors

222220635
75-4007-2: RNCC: 3 | RNVC: 2

8 Aug 1973

5110-21-639-5181
Hand Cold Chisel

216395181
495: RNCC: 3 | RNVC: 1
C2A: RNCC: 3 | RNVC: 2
39GP43: RNCC: 4 | RNVC: 1
C2A: RNCC: 5 | RNVC: 2
70-3/8: RNCC: 5 | RNVC: 2
REVA: RNCC: 6 | RNVC: 9
6Q19806: RNCC: 6 | RNVC: 9

4 Jun 1968

5110-21-102-9254
Knockout Punch And Die

211029254
MS16322-5: RNCC: 2 | RNVC: 2
737: RNCC: 3 | RNVC: 1
GGGP836: RNCC: 4 | RNVC: 1
17517/17567/31807: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-15-136-5586
Lima Contatti

151365586
330-1-2: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-66-130-7869
Punch And Die Set

661307869
119-7MM AND 3-7MM: RNCC: 3 | RNVC: 2

17 Jun 1988

5110-25-102-6354
Hand File

251026354
FS 5110-0649 POS 2: RNCC: 2 | RNVC: 2

1 Jan 1984

5110-15-213-6456
Serie Stampini Di 1

152136456
3022-10: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-262-1381
Hand Operated Wire Rope Cutter

992621381
NO PRIMARY REF 99-262-1381: RNCC: 3 | RNVC: 2
606-507: RNCC: 5 | RNVC: 2

8 Oct 1999

5110-12-126-1923
Brick Chisel

121261923
574B013-200X15: RNCC: 3 | RNVC: 2
3013-200-15: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-148-6007
Hand Reamer

121486007
NO PRIMARY REF 12-148-6007: RNCC: 3 | RNVC: 2
101570: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-149-7526
Hand File

661497526
NO PRIMARY REF 66-149-7526: RNCC: 3 | RNVC: 2
07077900: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-99-949-0094
Hand Reamer

999490094
B100: RNCC: 3 | RNVC: 1
BS328 PART 4: RNCC: 3 | RNVC: 1
B100 1/8IN.: RNCC: 5 | RNVC: 2

17 Mar 1999

5110-66-150-3386
Hand Operated Cable Cutter

661503386
NO PRIMARY REF 66-150-3386: RNCC: 3 | RNVC: 2
02535166: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-22-608-7525
Hand File

226087525
1-115-11-3-1: RNCC: 3 | RNVC: 2

18 Nov 2004

5110-99-910-5089
Hand File

999105089
COORDPATH4098: RNCC: 2 | RNVC: 2
DEFSTAN51-11PT6: RNCC: 6 | RNVC: 9
FA13592: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-859-0557
Hand Hacksaw Blade

218590557
31-1032: RNCC: 3 | RNVC: 2
RS1032: RNCC: 5 | RNVC: 2

14 May 1970

5110-12-130-9629
Ven Schneideinsatz

121309629
21861140: RNCC: 3 | RNVC: 2
218.61.140: RNCC: 5 | RNVC: 2
900-9VD3B3-30: RNCC: 5 | RNVC: 9

30 May 1969

5110-20-008-1473
Bolt Cutter

200081473
NBC300: RNCC: 3 | RNVC: 2

28 Nov 2013

5110-15-004-7139
Punzone Ovale In Du

150047139
50052700: RNCC: 3 | RNVC: 2

9 Dec 2013

5110-27-024-7381
Hand File

270247381
150X19X4: RNCC: 2 | RNVC: 1

27 Nov 2004

5110-12-320-0911
Knife Blade

123200911
E-617A: RNCC: 3 | RNVC: 2
5523640: RNCC: 5 | RNVC: 2
4010886552360: RNCC: 5 | RNVC: 2
552 364: RNCC: 5 | RNVC: 9

6 Dec 1989

5110-13-120-6974
Tailor's Shears

131206974
075.700.280: RNCC: 3 | RNVC: 2
5.025.000.001: RNCC: 3 | RNVC: 2
075.700.280: RNCC: 5 | RNVC: 2

29 Oct 2009

5110-14-532-9622
Diagonal Cutting Pliers

145329622
405.C: RNCC: 3 | RNVC: 2
3148511751107: RNCC: 5 | RNVC: 2

14 Jan 2003

5110-15-137-8657
Lima Abrasiva Retta

151378657
9730/0: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-137-9536
Troncabulloni A Man

151379536
1100060: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-126-1806
Saw Handle

121261806
2-100: RNCC: 3 | RNVC: 2
AE: RNCC: 5 | RNVC: 2
AE: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-218-2882
Tronchese Tr500pg

152182882
7/01805: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-17-015-5979
Hand File

170155979
TVA5110-2-263-006-1.1.4: RNCC: 3 | RNVC: 2
TVA5110-2-263-006: RNCC: 5 | RNVC: 1
12400402: RNCC: 5 | RNVC: 2
1147: RNCC: 5 | RNVC: 9

17 Jun 1972

5110-98-201-9441
Firmer Chisel

982019441
951-4259: RNCC: 3 | RNVC: 2
NO PRIMARY REF 98-201-9441: RNCC: 3 | RNVC: 2
M370 3/8IN.: RNCC: 5 | RNVC: 2

29 Mar 1988

5110-14-264-0418
Hand Metal Cutting Shears

142640418
438-26LA: RNCC: 3 | RNVC: 2
122-1-26: RNCC: 3 | RNVC: 2
3906-26: RNCC: 3 | RNVC: 9
560LI0N1-260: RNCC: 5 | RNVC: 2
13-55-270: RNCC: 5 | RNVC: 2
336-04-26: RNCC: 5 | RNVC: 9
UC9445CISAILLE: RNCC: 5 | RNVC: 9
560-1-26: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-99-615-6189
Scraping Knife

996156189
992/12800: RNCC: 3 | RNVC: 2

18 Mar 2008

5110-15-133-3422
Unghietta Mm 150

151333422
36-150: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-14-201-1122
Single Bow Cutting Punch

142011122
4637-3: RNCC: 3 | RNVC: 2
8017030001: RNCC: 3 | RNVC: 2
213-3: RNCC: 3 | RNVC: 2
153-3: RNCC: 3 | RNVC: 9
SYQ0840: RNCC: 5 | RNVC: 2
107-3: RNCC: 5 | RNVC: 9
345-10-3: RNCC: 5 | RNVC: 9
375-3: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-22-609-0131
Knife Blade

226090131
HB20-20450031: RNCC: 3 | RNVC: 2

9 Dec 2004

5110-12-319-8291
End Cutting Nippers

123198291
DIN5242-225: RNCC: 2 | RNVC: 2
9900220: RNCC: 3 | RNVC: 2
706650-220: RNCC: 3 | RNVC: 2
250A-08-0802: RNCC: 5 | RNVC: 2
4003773013273: RNCC: 5 | RNVC: 2
70250-220: RNCC: 5 | RNVC: 2
250A-08-0802: RNCC: 5 | RNVC: 9

8 Nov 1989

5110-15-123-7686
I Stampi Traforati

151237686
3679-2-150: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-910-4952
Hand File

999104952
DEF1098: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
9104952: RNCC: 6 | RNVC: 9
1A1021: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-140-3183
Double Bow Cutting Punch

121403183
NO PRIMARY REF 12-140-3183: RNCC: 3 | RNVC: 2
5731-56: RNCC: 5 | RNVC: 9

30 May 1969

5110-98-104-7100
Embroidery Scissors

981047100
NO PRIMARY REF 98-104-7100: RNCC: 3 | RNVC: 2
55: RNCC: 5 | RNVC: 2

27 Nov 1973

5110-17-017-6854
File Handle

170176854
TS5110-0505-65MM: RNCC: 3 | RNVC: 2
TS5110-0505: RNCC: 5 | RNVC: 1

17 Jun 1972

5110-66-149-8296
Tinner's Hollow Cutting Punch

661498296
NO PRIMARY REF 66-149-8296: RNCC: 3 | RNVC: 2
07235001: RNCC: 5 | RNVC: 2

14 Apr 2003

5110-15-216-4753
Scalpello Piatto Ne

152164753
3SANCNPP200: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-187-2845
Trapano Supporto

151872845
2000057806: RNCC: 3 | RNVC: 2
(241)AA1362000057806: RNCC: 5 | RNVC: 2

10 Mar 2009

5110-99-910-4332
Chisel Bar

5110-99-910-7784

5110-99-910-5157

5110-25-103-5067

5110-15-233-4606
Tronchese

152334606
410-165: RNCC: 3 | RNVC: 2
1.55.20.06: RNCC: 3 | RNVC: 2
511015E105668: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-27-010-6585
Hand File

270106585
99999-NIIN-DA0037140: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-14-488-3030
Pliers

144883030
187.16EG: RNCC: 3 | RNVC: 2
0142630: RNCC: 5 | RNVC: 2
187-16EG: RNCC: 5 | RNVC: 2
3148511426302: RNCC: 5 | RNVC: 2

29 Apr 1997

5110-14-248-5514

5110-14-295-6822

5110-21-639-5227
Hand Half Round Nose Chisel

216395227
3B: RNCC: 3 | RNVC: 1
3B: RNCC: 3 | RNVC: 1
39GP43: RNCC: 4 | RNVC: 1

9 Jun 1964

5110-15-105-5036
Metalli Unghietta

151055036
3603/0-200: RNCC: 3 | RNVC: 2

30 May 1989

5110-66-150-2130
Hand Hacksaw Blade

661502130
NO PRIMARY REF 66-150-2130: RNCC: 3 | RNVC: 2
06900405: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-12-379-7829
Diagonal Cutting Pliers

123797829
T3740DEF 115: RNCC: 3 | RNVC: 2
3740DEF-115: RNCC: 5 | RNVC: 2

2 Sep 2009

5110-99-910-4828
Hand File

999104828
DEF1098: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
FA13235: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-849-8175
Hand File

218498175
39GP30: RNCC: 4 | RNVC: 1
5110-0530: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-12-122-2533
Hand Reamer

121222533
513A103SS11-16: RNCC: 3 | RNVC: 2

30 May 1969

5110-99-136-4266
Hand Wire Stripper

991364266
PA1953/6: RNCC: 3 | RNVC: 2
217-4608: RNCC: 5 | RNVC: 2

25 Aug 1999

5110-21-108-1263

5110-21-865-8653
Hand File

218658653
15-223-10A: RNCC: 3 | RNVC: 2

14 Apr 1972

5110-21-804-9020

5110-22-303-8648

5110-98-205-4175
Hand File

982054175
DFAMPD00101: RNCC: 2 | RNVC: 2

11 Aug 2000

5110-25-103-9564
Hand File Set

251039564
14SBF5110HVK2: RNCC: 2 | RNVC: 1
12FILERFS5110-0641: RNCC: 2 | RNVC: 2
5445T: RNCC: 3 | RNVC: 2
3171-554-3: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-21-637-5732
Hand Reamer

216375732
B94-2: RNCC: 3 | RNVC: 1
50-11141: RNCC: 3 | RNVC: 2
B174-2: RNCC: 4 | RNVC: 1
GGGR180: RNCC: 4 | RNVC: 1
1621: RNCC: 5 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1

4 Jun 1968

5110-17-104-3618
Boorstandaar Hendel

171043618
FM19-11-2/FM19-11-3: RNCC: 3 | RNVC: 2

27 May 1990

5110-12-332-9635
File Handle

123329635
0000 881 4500: RNCC: 3 | RNVC: 9

13 Oct 1993

5110-21-639-5058
Turning Chisel

216395058
476: RNCC: 3 | RNVC: 1

4 Jun 1968

5110-12-144-8214
Ventilsitz- Fraeser

121448214
833589005100: RNCC: 3 | RNVC: 2
8335890051: RNCC: 5 | RNVC: 2

30 May 1969

5110-99-461-2595
Hand Reamer

994612595
H9: RNCC: 3 | RNVC: 2

29 Jan 1998

5110-15-139-8669
Pinza Spelafili

151398669
PTS4: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-137-8564
Segaccio A Mano Mm.

151378564
5445/2-400: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-135-2998
Hand Reamer

121352998
838-39: RNCC: 3 | RNVC: 2
513G003-39: RNCC: 3 | RNVC: 2

30 May 1969

5110-12-176-8356
Hand Reamer

121768356
DIN206-B18-HSS: RNCC: 2 | RNVC: 2
301-FORM B-18: RNCC: 3 | RNVC: 2
F1131-18: RNCC: 3 | RNVC: 2
7586C18: RNCC: 5 | RNVC: 9
536C18: RNCC: 5 | RNVC: 9
B18DIN206HSS: RNCC: 5 | RNVC: 9
13010-18: RNCC: 5 | RNVC: 9

20 Dec 1978

5110-21-637-4332
Hand Masonry Drill

216374332
MS17065-6: RNCC: 2 | RNVC: 2
1245-12: RNCC: 3 | RNVC: 2
GGGD691: RNCC: 4 | RNVC: 1

4 Jun 1968

5110-14-200-9860
End Cutting Nippers

142009860
E73-111-160: RNCC: 2 | RNVC: 2
188-16CH: RNCC: 3 | RNVC: 2
100C16: RNCC: 5 | RNVC: 2
100C16: RNCC: 5 | RNVC: 9
3920L16: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-15-218-0234
Set Lime Ad Ago

152180234
2-472-14-2-0: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-469-2639
Cutting Punch Insert

144692639
DBX50DAREX-8MM: RNCC: 3 | RNVC: 2

15 Apr 1994

5110-99-910-4203
Hand Cold Chisel

999104203
4001: RNCC: 3 | RNVC: 2
BS3066-TABLE 3: RNCC: 4 | RNVC: 1
H5370: RNCC: 5 | RNVC: 2
H20678: RNCC: 5 | RNVC: 2
H20280: RNCC: 6 | RNVC: 9
7000876: RNCC: 6 | RNVC: 9
FA11251: RNCC: 6 | RNVC: 9
910-4203: RNCC: 6 | RNVC: 9
1A440: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-150-2142
Hand Hacksaw Blade

661502142
NO PRIMARY REF 66-150-2142: RNCC: 3 | RNVC: 2
09741616: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-12-352-9031
Saege Halter

123529031
5803786-201700.00: RNCC: 2 | RNVC: 2
65.7162.245.00: RNCC: 3 | RNVC: 2

4 Jan 2001

5110-25-103-8616
Double Bow Cutting Punch

251038616
2SBF5110HVK1: RNCC: 2 | RNVC: 1
221 4300: RNCC: 5 | RNVC: 2
221-4300: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-12-177-5805
Rectangular Cutting Punch

121775805
6886-20X4: RNCC: 3 | RNVC: 9
3916-20X4: RNCC: 5 | RNVC: 9

7 Feb 1979

5110-15-176-2248
Tagliabulloni Tipo

151762248
72191: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-138-0803
Cesoia Per Lattonie

151380803
203B/250: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-21-905-9647
Jeweler's Saw Frame

219059647
49-770: RNCC: 3 | RNVC: 2
W5757116: RNCC: 6 | RNVC: 9

7 Mar 1989

5110-14-261-3832
Bedane Menuisier

142613832
28-14: RNCC: 3 | RNVC: 9

1 Jan 1970

5110-66-149-7509
Hand File

661497509
NO PRIMARY REF 66-149-7509: RNCC: 3 | RNVC: 2
00898042: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-21-814-6451
Dimpling Die

218146451
ZT1771-1/8: RNCC: 3 | RNVC: 2
ZT1771-1-8: RNCC: 5 | RNVC: 2

13 Jun 1964

5110-15-074-6193
File Holder

150746193
14INART110PIATTAPARALLELA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-137-9550
Pinza Spelafili

151379550
1142016: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-385-2789
Craftsman's Knife

123852789
50.000.132: RNCC: 3 | RNVC: 2

17 May 2011

5110-25-101-4634
Craftsman's Knife

251014634
210MMLG: RNCC: 5 | RNVC: 1

1 Jan 1984

5110-66-155-6944
Hand Reamer Set

661556944
050-153-341: RNCC: 3 | RNVC: 2

10 May 2007

5110-21-802-6934
Stripper And Cutter

218026934
299: RNCC: 3 | RNVC: 2

22 May 1968

5110-21-849-8073
Hand File

218498073
39GP30: RNCC: 4 | RNVC: 1
REVB: RNCC: 5 | RNVC: 9
5110-0614: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-15-165-4130
Lima Ad Ago 160 Mm.

151654130
1720010: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-218-4092
Lama Per Taglierina

152184092
LAMATAGLIERINA10MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-165-4218
Tronchesina Taglio

151654218
E124S: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-21-865-8293
Hand File

218658293
NO PRIMARY REF 21-865-8293: RNCC: 3 | RNVC: 2

14 Apr 1972

5110-14-226-7435
Hand Masonry Drill

142267435
NO PRIMARY REF14-226-7435: RNCC: 3 | RNVC: 2
2402-4-5: RNCC: 5 | RNVC: 9

1 Jan 1966

5110-21-840-0085
Hand Reamer

218400085
NO PRIMARY REF 21-840-0085: RNCC: 3 | RNVC: 2

26 Mar 1965

5110-12-309-0762
Hand File

123090762
2152101: RNCC: 3 | RNVC: 2
2152-100-1: RNCC: 5 | RNVC: 2

11 Dec 1986

5110-21-849-8264
Hand File

218498264
39GP53: RNCC: 4 | RNVC: 1
5110-0706: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-15-186-0908
Stelo Obliquo Sicut

151860908
9730G-20: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-320-0215
De-Burring Tool

993200215
STD354/4 NO13 DRILL: RNCC: 3 | RNVC: 2
3AP-95893: RNCC: 6 | RNVC: 9

5 Aug 2002

5110-14-530-3485
Fireman's Strap Cutting Knife

145303485
85.1.489: RNCC: 3 | RNVC: 2
473-480-000: RNCC: 5 | RNVC: 2

4 Jun 2002

5110-21-862-5799
Hand File

218625799
39GP30: RNCC: 4 | RNVC: 1

17 Jun 1971

5110-15-190-3125
Sponderuola

151903125
5QLESE32: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-191-7456
Tronchesi Taglio Ob

151917456
6612-5-185: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-14-274-7994
Hand Metal Stamping Die Set

142747994
DELA.3230.03: RNCC: 3 | RNVC: 2
4650-3: RNCC: 3 | RNVC: 9
3230-3: RNCC: 5 | RNVC: 9
91LETTRES3: RNCC: 5 | RNVC: 9
342-01-3: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-99-721-6340
Notched Wire Cutter

997216340
NO PRIMARY REF 99-721-6340: RNCC: 3 | RNVC: 2
2111: RNCC: 5 | RNVC: 2
544-386: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-15-230-5604
Portalima Con Lima

152305604
1338A: RNCC: 3 | RNVC: 2
511015E087191: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-17-100-7469
Hand Reamer Set

171007469
5210A 039: RNCC: 3 | RNVC: 2

21 May 1986

5110-99-607-1440

5110-12-173-8321

5110-25-122-4292

5110-15-184-6945
Trapano

151846945
5DMNCNN2A6: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-314-5158
Pliers

123145158
36913P: RNCC: 3 | RNVC: 2
36913.P: RNCC: 5 | RNVC: 2

15 Jul 1988

5110-99-942-0124

5110-15-124-8363
Alesatore Cilindric

151248363
7730-6-00: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-143-3907
Mola Abrasiva Per T

151433907
1122/1-230: RNCC: 3 | RNVC: 2
1122-1-230: RNCC: 3 | RNVC: 2
1122/1/230: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-21-807-1130
Hand Reamer

218071130
J1 3-16T01 11-32: RNCC: 3 | RNVC: 1
RP1250: RNCC: 5 | RNVC: 9

5 Feb 1964

5110-12-141-1374
Hand Masonry Drill

121411374
NO PRIMARY REF 12-141-1374: RNCC: 3 | RNVC: 2
600008: RNCC: 5 | RNVC: 9
98-1-2-8-6: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-054-1393
Bucksaw Blade

150541393
5434-400-8: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-99-910-5664
Hollo Cutting Punch

999105664
DL9A-H5646: RNCC: 2 | RNVC: 2
DL9A: RNCC: 5 | RNVC: 2
H5646: RNCC: 6 | RNVC: 9
F1FA16071: RNCC: 6 | RNVC: 9
1K171: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-333-3491
Double Bow Cutting Punch

143333491
214-23: RNCC: 3 | RNVC: 2
376-23: RNCC: 3 | RNVC: 2
4638-23: RNCC: 3 | RNVC: 9
345-11-23: RNCC: 5 | RNVC: 9
214-23: RNCC: 5 | RNVC: 9

2 Jul 1975

5110-12-141-1689
Hand File

121411689
DIN7261-B350-1: RNCC: 2 | RNVC: 2
3122351: RNCC: 3 | RNVC: 2
1122-350-1: RNCC: 3 | RNVC: 2
1122-350-1: RNCC: 5 | RNVC: 2
B350-1DIN7261: RNCC: 5 | RNVC: 2
C375X1DIN8333: RNCC: 5 | RNVC: 9
DIN7261B350-1: RNCC: 5 | RNVC: 9

30 May 1969

5110-32-001-2564
Barbed Wire Cutter

320012564
DSTA-PR/GE/C/0077: RNCC: 2 | RNVC: 2
DRG NO. P/76/210: RNCC: 5 | RNVC: 9
SAF-SP-C-0056B: RNCC: 5 | RNVC: 9
SAF/SPEC/G/152: RNCC: 5 | RNVC: 9
DSTA-PR/GE/C/0077: RNCC: 6 | RNVC: 9

29 Oct 1976

5110-99-212-8988
Tube Fitting Male Flare Seat Refacing Tool

992128988
CD5081/TD04/026: RNCC: 3 | RNVC: 2

15 Feb 2006

5110-25-103-3318
Ship Scraper

251033318
NO PRIMARY REF25-103-3318: RNCC: 3 | RNVC: 2
223 9140: RNCC: 5 | RNVC: 2
223-9140: RNCC: 5 | RNVC: 2
204702-0: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-99-831-9155

5110-99-465-8115

5110-22-180-1239

5110-17-110-7388
Hand Ruimer

5110-99-465-1854

5110-25-103-5157

5110-25-103-4826

5110-12-346-0952
Paper Cutter

123460952
4318: RNCC: 3 | RNVC: 2
PROFI CUT 2: RNCC: 5 | RNVC: 2
4113/4114: RNCC: 5 | RNVC: 9
6740-01300: RNCC: 6 | RNVC: 9

9 Jun 1998

5110-99-252-4797
Diagonal Cutting Pliers

992524797
410F: RNCC: 3 | RNVC: 2
1H/1390: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-129-3787

5110-22-121-4414
Universal Pliers

221214414
281-110: RNCC: 3 | RNVC: 2

16 Mar 1989

5110-22-623-6192
Woodcarving Gouge

226236192
422P-12: RNCC: 3 | RNVC: 2

20 Feb 2012

Load More Results