What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 52 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 52of 112

5110-25-126-6694

5110-25-101-5785

5110-25-101-5782

5110-27-010-6706
Hand File

270106706
99999-NIIN-DA0014056: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-12-140-1043
Ship Scraper

121401043
33934: RNCC: 3 | RNVC: 2

30 May 1969

5110-27-010-6626
Hand File

270106626
99999-NIIN-DA0037191: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-14-226-7432
Hand Masonry Drill

142267432
NO PRIMARY REF14-226-7432: RNCC: 3 | RNVC: 2
566-10: RNCC: 5 | RNVC: 9

1 Jan 1966

5110-20-004-7590
Hand File

200047590
FFB10: RNCC: 3 | RNVC: 2

20 Apr 2009

5110-27-046-3927
Maket Bicagi Uc

270463927
5110KK061518: RNCC: 2 | RNVC: 1

4 Aug 2009

5110-99-599-9659
Outer Settling Bush

995999659
MC1275181: RNCC: 3 | RNVC: 2

20 May 2002

5110-99-008-1261
Cable Stripping Too

5110-99-401-3268

5110-22-221-3870

5110-25-100-4150

5110-12-127-7385
Single Bow Cutting Punch

121277385
DIN7200-B13: RNCC: 2 | RNVC: 2
B13DIN7200: RNCC: 5 | RNVC: 2
DIN7200B13: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-209-8226
Lima Ad Ago

152098226
991-013: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-370-1108
Jeu Pointes Carrees

143701108
235-1PC: RNCC: 3 | RNVC: 2
130049: RNCC: 5 | RNVC: 2

18 May 1981

5110-15-173-6295
Forbice Lame Dritte

151736295
9904074: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-99-129-4723

5110-99-137-5671

5110-33-190-2477

5110-14-541-1714
Diagonal Cutting Pliers

145411714
405.MT: RNCC: 3 | RNVC: 2
405-MT: RNCC: 5 | RNVC: 2

14 May 2004

5110-12-345-8986
Pipe Cutter

123458986
290000: RNCC: 3 | RNVC: 2
REMS RAS P10-63: RNCC: 5 | RNVC: 2

13 May 1998

5110-25-103-8628
Doubl Cutting Punch

5110-25-103-9169

5110-22-283-1393

5110-25-103-9153

5110-15-125-8641
Scalpello Per Legno

151258641
8252/14: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-221-4907
Utensile

152214907
EX5110RI7422421: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-215-8437
Lima A Coltello

152158437
2566-2-12: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-639-4208
Hand File

216394208
39GP30: RNCC: 4 | RNVC: 1

1 Feb 1965

5110-15-165-4048
Raschietto Per Meta

151654048
3278120: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-143-9896

5110-15-221-4737
Accettino

152214737
EX5110RI7421511: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-385-3010
Rectangular Cutting Punch

123853010
50.000.191: RNCC: 3 | RNVC: 2

19 May 2011

5110-25-110-8992

5110-37-513-9062

5110-25-109-9417
File Handle

5110-22-610-3704

5110-25-120-1381
Double Bow Cutting Punch Set

251201381
FS 5110-0197 A: RNCC: 2 | RNVC: 2
245: RNCC: 3 | RNVC: 1
5110-14-241-9844: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-98-205-3882
Hand File

982053882
DFAMPD00078/SLITTING: RNCC: 2 | RNVC: 2
DFAMPD00078/J: RNCC: 3 | RNVC: 2

29 Jun 2000

5110-15-218-8417
Tronchesina 160Mm

152188417
66023165: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-383-2650
Diagonal Cutting Pliers

123832650
TC50: RNCC: 3 | RNVC: 2

30 Sep 2010

5110-12-386-1544
Hand Wire Stripper

123861544
115.1014: RNCC: 3 | RNVC: 2
391129148203: RNCC: 6 | RNVC: 9

11 Aug 2011

5110-98-107-5955
Hand File

981075955
200MM,WARDING,SMOOTH: RNCC: 5 | RNVC: 9

3 Nov 1983

5110-98-203-2817
Pocket Scissors

982032817
0260: RNCC: 3 | RNVC: 2

16 Aug 1989

5110-98-851-7339
Hand Hacksaw Blade

988517339
NO PRIMARY REF 98-851-7339: RNCC: 3 | RNVC: 2
H1018: RNCC: 5 | RNVC: 2

30 Nov 1976

5110-15-199-0785
Double Bow Cutting Punch

151990785
3703-52: RNCC: 3 | RNVC: 2
C3703-52: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-273-7543
End Cutting Nippers

142737543
E73-111-160IS0LEE: RNCC: 2 | RNVC: 2
188-16B0: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-12-171-2507
Hand- Fraeser

121712507
VG95211-ML-121712507: RNCC: 2 | RNVC: 2
105-31781W2-030.01: RNCC: 3 | RNVC: 2
105-31781W2-030-01: RNCC: 5 | RNVC: 2

21 Sep 1977

5110-99-301-6708
Pipe Cutter

993016708
162736: RNCC: 3 | RNVC: 2
LE463B1: RNCC: 6 | RNVC: 9
H894-45395: RNCC: 6 | RNVC: 9

22 May 1996

5110-15-188-9400
Electricians' Scissors

151889400
1601 1: RNCC: 3 | RNVC: 2
(241)AA04516011: RNCC: 5 | RNVC: 2

22 Dec 2009

5110-66-019-7353
Hand Reamer

660197353
HAND REAMER: RNCC: 3 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5110-14-244-0732

5110-14-267-4784
Single Bow Cutting Punch

142674784
8017040001: RNCC: 3 | RNVC: 2
213-4: RNCC: 3 | RNVC: 2
SYQ0841: RNCC: 5 | RNVC: 2
345-10-4: RNCC: 5 | RNVC: 9
375-4: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-12-384-1256
Hand Cold Chisel

123841256
4031-200: RNCC: 3 | RNVC: 2

25 Jan 2011

5110-15-009-2896
Anchor

150092896
700001: RNCC: 3 | RNVC: 2

2 Jan 1980

5110-21-809-1609

5110-99-203-1312

5110-15-137-8466
Serie Punzoni Numer

151378466
3681/2-5: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-22-303-8651

5110-21-868-0875
Glass Cutter

218680875
S39915B: RNCC: 3 | RNVC: 2

18 Aug 1972

5110-14-201-7239

5110-21-886-6819
Off-Set Knife

218866819
W922/5: RNCC: 3 | RNVC: 2

21 Sep 1981

5110-99-391-0707
Hand Cable Stripper

5110-25-120-3921

5110-25-112-6015

5110-99-186-9054
Reamerline

991869054
R6Y206/37: RNCC: 3 | RNVC: 2
26DL-96098: RNCC: 6 | RNVC: 9

20 Jun 2002

5110-66-149-7511
Hand File

661497511
NO PRIMARY REF 66-149-7511: RNCC: 3 | RNVC: 2
00809132: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-99-465-3635

5110-13-009-9003
Glass Cutter

130099003
641A304-1000: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-66-158-2987
Reamer Adaptor

661582987
502AMR288-12: RNCC: 3 | RNVC: 2
502AMR288-12: RNCC: 5 | RNVC: 2

29 Oct 2009

5110-15-236-5674
Tenaglie Knippex

152365674
315: RNCC: 3 | RNVC: 2
511015E000889: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-27-025-4017
Hand Operated Wire Rope Cutter

270254017
5001420001: RNCC: 2 | RNVC: 1

11 Mar 2005

5110-99-910-4220
Firmer Chisel

999104220
DEF STAN 51-11:PART 27: RNCC: 4 | RNVC: 1
BS1943: RNCC: 4 | RNVC: 1
H405: RNCC: 6 | RNVC: 9
1A386: RNCC: 6 | RNVC: 9
TABLE1A: RNCC: 6 | RNVC: 9
FA11283: RNCC: 6 | RNVC: 9
BS1943-TABLE1A: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-149-7501
Hand File

661497501
NO PRIMARY REF 66-149-7501: RNCC: 3 | RNVC: 2
07072604: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-12-326-8925
Zange Klinge

123268925
209026: RNCC: 3 | RNVC: 2

6 Nov 1991

5110-99-144-2330

5110-25-138-3793

5110-66-150-3296
Diagonal Cutting Pliers

661503296
NO PRIMARY REF 66-150-3296: RNCC: 3 | RNVC: 2
07203305: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-99-796-7422
Hand Operated Cable Cutter

997967422
NO PRIMARY REF 99-796-7422: RNCC: 3 | RNVC: 2
544-487: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-17-110-7389
Hand Ruimer

5110-22-115-2561

5110-17-110-3987
Handmet Zaagbeugel

5110-99-721-6385

5110-98-105-5624

5110-99-957-8586
Tolerance Bridge

999578586
MC1278111: RNCC: 3 | RNVC: 2

17 May 2002

5110-12-348-5786
Straight Trimmers Shears

123485786
769200-200: RNCC: 3 | RNVC: 2
76920-200: RNCC: 5 | RNVC: 9

21 Jul 1999

5110-12-129-2422
Coping Saw Blade

121292422
NO PRIMARY REF 12-129-2422: RNCC: 3 | RNVC: 2
575F102-5-0: RNCC: 5 | RNVC: 9

30 May 1969

5110-19-001-0820
Hand Cold Chisel

190010820
207.104: RNCC: 3 | RNVC: 2
352-19: RNCC: 3 | RNVC: 2

19 Aug 2004

5110-22-304-0609
Konis Haand Rival

223040609
V3506-4: RNCC: 6 | RNVC: 9

21 Oct 1974

5110-99-910-9956
Hand Reamer

999109956
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
10114: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16211: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-130-7872
Punch And Die Set

661307872
119-16MM AND 3-16MM: RNCC: 3 | RNVC: 2

17 Jun 1988

5110-15-173-0887
Lama Per Pialla Ele

151730887
07136421: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-14-564-2124
Hand Cold Chisel

145642124
7210200001: RNCC: 3 | RNVC: 2

15 Apr 2010

5110-22-111-7203

5110-15-218-5891
Lima A Mazzo Mezzot

152185891
1719C-M250: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-432-8795

5110-99-432-8922

5110-12-130-9624
Ven Schneideinsatz

121309624
21861110: RNCC: 3 | RNVC: 2
218.61.110: RNCC: 5 | RNVC: 2
900-4VD3A3: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-150-0038
Hand Wire Stripper

661500038
NO PRIMARY REF 66-150-0038: RNCC: 3 | RNVC: 2
04586258: RNCC: 5 | RNVC: 2

11 Apr 2003

5110-99-910-4261
Hardy

999104261
S37: RNCC: 3 | RNVC: 2
DL9A-H537: RNCC: 6 | RNVC: 9
FA11521: RNCC: 6 | RNVC: 9
1A4200: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-25-116-0923
Single Bit Ax

251160923
FS 5110-0403 POS 1: RNCC: 2 | RNVC: 2
231B: RNCC: 3 | RNVC: 2
214 0630: RNCC: 5 | RNVC: 2
214-0630: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-66-128-8307
Hand Wire Stripper

5110-33-102-2153

5110-22-120-9869
Hand Cold Chisel

221209869
304-22X150MM: RNCC: 3 | RNVC: 2
0304000150-3: RNCC: 3 | RNVC: 2
304-150X22: RNCC: 3 | RNVC: 2

30 May 1985

5110-22-610-4999
Circle Cutter

226104999
4.328.903.917: RNCC: 3 | RNVC: 2

26 May 2005

5110-15-214-9169
Tagliabulloni Regis

152149169
HIT900: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-304-1763

5110-17-107-6695
Half Hatchet

171076695
SL5120-2-136-259: RNCC: 3 | RNVC: 2

23 Nov 1993

5110-12-177-5812
Locheisen

121775812
6888-2X9: RNCC: 3 | RNVC: 9

7 Feb 1979

5110-99-942-6276
Hand Hacksaw Blade

999426276
BS1919: RNCC: 4 | RNVC: 1
51-11PT7: RNCC: 6 | RNVC: 9
H5540: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-110-5157
Pliers

151105157
2209-165: RNCC: 3 | RNVC: 2

7 Sep 1989

5110-66-150-6024
Punch Wad

661506024
NO PRIMARY REF 66-150-6024: RNCC: 3 | RNVC: 2
07242201: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-25-100-4299

5110-25-102-3798

5110-25-100-4158

5110-15-055-9123
Beef Fulloin Chille

150559123
8440250P: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-51-000-7177
Pocket Knife

510007177
MT270045: RNCC: 3 | RNVC: 2
VGS00495: RNCC: 5 | RNVC: 2
MT270045: RNCC: 5 | RNVC: 2
MT270045: RNCC: 5 | RNVC: 9
521529233106: RNCC: 6 | RNVC: 9

10 Sep 2009

5110-98-107-7135
Hand Reamer

981077135
PARALLEL1/2X3X6IN.: RNCC: 3 | RNVC: 2

8 Feb 1984

5110-14-281-0559
Hand Operated Cable Cutter

142810559
4484-2802: RNCC: 3 | RNVC: 9

1 Jan 1971

5110-99-910-4905
Hand File

999104905
DEF1098: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
FA13410: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-195-4395
Hand Operated Asbestos Cement Shingle Cutter

151954395
Q01-2X1000: RNCC: 1 | RNVC: 2
(241)AE954Q01-2X1000: RNCC: 3 | RNVC: 2

24 Mar 2011

5110-19-004-4340
Craftsman's Knife

190044340
54172/001: RNCC: 3 | RNVC: 2

8 Feb 2011

5110-66-150-2258
Pinking Shears

661502258
NO PRIMARY REF 66-150-2258: RNCC: 3 | RNVC: 2
05267253: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-21-842-8177

5110-12-132-2351
Reamer Blade Set

121322351
101.21.400: RNCC: 3 | RNVC: 2
101-21-400: RNCC: 5 | RNVC: 2
800-23HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-384-8156
Hand Cold Chisel

123848156
51.000.040: RNCC: 3 | RNVC: 2
53.000.037: RNCC: 3 | RNVC: 2
51.000.040: RNCC: 5 | RNVC: 2
53.000.037: RNCC: 5 | RNVC: 2

31 Mar 2011

5110-21-842-8839

5110-99-350-2011
Cable Cutter Blades

993502011
100147-9000-351: RNCC: 1 | RNVC: 2
K105/1B: RNCC: 3 | RNVC: 2
CSG4A: RNCC: 6 | RNVC: 9

15 Oct 2003

5110-27-007-3831
Hand File

270073831
24.1.10: RNCC: 2 | RNVC: 1

20 Jun 2002

5110-66-149-7515
Hand File

661497515
NO PRIMARY REF 66-149-7515: RNCC: 3 | RNVC: 2
06363107: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-15-214-5475
Lama X Sega A Nastr

152145475
LAMA5130X30X0,8MM.6DENTI: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-98-104-9066

5110-25-109-5321
Tann Hoevel

5110-37-300-1108

5110-14-492-6649
Foret

144926649
NO PRIMARY REF14-492-6649: RNCC: 3 | RNVC: 2
2025480: RNCC: 5 | RNVC: 9
F300 0T 008 4226: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-12-363-5420
Hand Cable Stripper

123635420
BN541334: RNCC: 3 | RNVC: 2
541334-0E: RNCC: 5 | RNVC: 2

29 Jun 2004

5110-14-469-2638
Cutting Punch Insert

144692638
DBX50DAREX-6MM: RNCC: 3 | RNVC: 2

15 Apr 1994

5110-99-465-8114
Chisel And G Handle

994658114
1B4035: RNCC: 3 | RNVC: 2

18 Jan 1977

5110-15-165-4235
Cacciavite A Taglio

151654235
0211500220: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-717-9761
Smoothing Plane

997179761
4: RNCC: 3 | RNVC: 2

1 Apr 1980

5110-12-387-9624
Pliers

123879624
5944550000: RNCC: 3 | RNVC: 2
08.02350-9001: RNCC: 5 | RNVC: 2
08023509001: RNCC: 5 | RNVC: 2

13 Feb 2012

5110-12-177-5804
Rectangular Cutting Punch

121775804
6886-12X3: RNCC: 3 | RNVC: 9
3916-12X3: RNCC: 5 | RNVC: 9

7 Feb 1979

5110-15-123-2462
Tronchese Isolante

151232462
7132-160: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-126-1428
Hand Rasp

121261428
TL5110-0036-730: RNCC: 2 | RNVC: 2
DIN7263-A250-2: RNCC: 5 | RNVC: 1
1512-250-2: RNCC: 5 | RNVC: 2
TK5110-219-730: RNCC: 5 | RNVC: 2
DIN7263A250-2: RNCC: 5 | RNVC: 9
19137-250-2: RNCC: 5 | RNVC: 9
1512252: RNCC: 5 | RNVC: 9
A250-2DIN7263: RNCC: 5 | RNVC: 9
B250X2DIN8331R: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-213-9095
Rastrello In Allumi

152139095
RASTRELLO IN ALLUMINIO: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-465-1840
Graver

5110-21-805-7958

5110-21-851-2531
Breast Drill

218512531
742: RNCC: 3 | RNVC: 2
5110-0281: RNCC: 5 | RNVC: 9

2 Aug 1968

5110-12-132-2355
Reamer Blade Set

121322355
101.27.400: RNCC: 3 | RNVC: 2
101-27-400: RNCC: 5 | RNVC: 2
800-25HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-25-103-8618
Double Bow Cutting Punch

251038618
2SBF5110HVK1: RNCC: 2 | RNVC: 1
221 4340: RNCC: 5 | RNVC: 2
221-4340: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-15-220-1036
Forbici Curve

152201036
FC-ALFA: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-216-1708
75 Filiera Skf 8X0

152161708
SKF8X0-75: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-574-6246
Cutter And Crimper

145746246
FR-99000: RNCC: 3 | RNVC: 2

7 Feb 2013

5110-15-132-7034
Cesoia Per Lamiere

151327034
2056-190: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-66-149-7514
Hand File

661497514
NO PRIMARY REF 66-149-7514: RNCC: 3 | RNVC: 2
00809030: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-98-200-0469
Knife Blade

982000469
1275B: RNCC: 3 | RNVC: 2

5 Dec 1985

5110-99-740-9302

5110-15-208-4989
Scalpello Per Mecca

152084989
3SANMMPUZ250X11: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-126-8540
Cesoia

151268540
8266: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-22-221-4610

5110-22-221-4214

5110-17-801-9383
Hand File

178019383
TVA5110-2-263-005-1.1.4: RNCC: 3 | RNVC: 2
TVA5110-2-263-005: RNCC: 5 | RNVC: 1
12101201: RNCC: 5 | RNVC: 2

17 Jun 1972

5110-25-100-4132
Firmer Chisel

251004132
FS 5110-0754 POS 1: RNCC: 2 | RNVC: 2
13-2204: RNCC: 3 | RNVC: 2
3181-174-8: RNCC: 3 | RNVC: 2
41-2252-200-030: RNCC: 5 | RNVC: 2
211 0820: RNCC: 5 | RNVC: 2
211-0820: RNCC: 5 | RNVC: 2
205055-2: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-14-530-3004
Diagonal Cutting Pliers

145303004
434.E: RNCC: 3 | RNVC: 2
3148511761304: RNCC: 5 | RNVC: 2

29 May 2002

5110-25-100-4145
Hand Masonry Drill

251004145
NO PRIMARY REF25-100-4145: RNCC: 3 | RNVC: 2
41-3064-270-120: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-33-156-5807
Sierra Man Cuchilla

5110-33-156-5810
Sierra Man Cuchilla

5110-25-102-2179
Bearing Scraper

251022179
3691: RNCC: 3 | RNVC: 2
824-3: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-12-364-8960
Diagonal Cutting Pliers

123648960
3-133-1: RNCC: 3 | RNVC: 2

12 Nov 2004

5110-25-106-1542
Double Bow Cutting Punch

251061542
NO PRIMARY REF25-106-1542: RNCC: 3 | RNVC: 2
1711-1600: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-12-135-2996
Hand Reamer

121352996
838-28: RNCC: 3 | RNVC: 2
513G003-28: RNCC: 3 | RNVC: 2

30 May 1969

5110-15-143-3991
Utensile Da Tornio

151433991
777-24-16: RNCC: 3 | RNVC: 2
777/24-16: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-15-175-5244
Spazzola A Pennello

151755244
D4012/11-15: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-27-000-8062
Single Bow Cutting Punch

270008062
5700 24 0023: RNCC: 3 | RNVC: 2

11 Jun 1991

5110-20-006-2729
Turning Chisel

200062729
KPRO-08: RNCC: 3 | RNVC: 2

19 Apr 2011

5110-99-577-1647
Saw Blade

995771647
NO PRIMARY REF 99-577-1647: RNCC: 3 | RNVC: 2
25-0003: RNCC: 5 | RNVC: 2
TT5552274: RNCC: 6 | RNVC: 9

11 Oct 2001

5110-12-140-1144
Hand Cold Chisel

121401144
NM247-02: RNCC: 3 | RNVC: 2
NM247-02: RNCC: 5 | RNVC: 9

30 May 1969

5110-27-019-4603
Hand File

270194603
10091KEGE0107: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-27-007-8337
Hand Operated Cable Cutter

270078337
100MM: RNCC: 2 | RNVC: 1

3 Mar 2000

5110-99-538-2710

5110-25-112-5392

5110-99-445-4652
Snow Saw

5110-17-110-7362
Hand Reamer

171107362
P926-0,2056-0,1910: RNCC: 3 | RNVC: 2
P926-: RNCC: 6 | RNVC: 9

18 Feb 1997

5110-15-104-4121
Intaglio Cacciavite

151044121
1200-4X150: RNCC: 3 | RNVC: 2
1200100: RNCC: 3 | RNVC: 2

30 May 1989

5110-12-326-9452
Hand Metal Cutting Shears

123269452
214-275L: RNCC: 3 | RNVC: 9
214/11L: RNCC: 5 | RNVC: 9

12 Nov 1991

5110-14-202-1785
Jointer Plane

142021785
NO PRIMARY REF14-202-1785: RNCC: 3 | RNVC: 2
6-54: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-15-208-4596
Alesatore Conico Un

152084596
3AAWFPCNDN1-15X1-79: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-298-7836
Hand Masonry Drill

142987836
4491-10: RNCC: 3 | RNVC: 9

1 Jan 1973

5110-15-208-4893
Pialla

152084893
5PLECNDL60X700: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-186-3661
Raspa Per Legno Ton

151863661
1719RR: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-123-2130
Estrattore Idraulic

151232130
452I-5: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-22-612-4896
Craftsman's Knife

226124896
9801.12.A: RNCC: 3 | RNVC: 2

16 Jan 2006

5110-21-639-5244
Hand Diamond Point Chisel

216395244
1178: RNCC: 3 | RNVC: 2
39GP43: RNCC: 4 | RNVC: 1
350-3/8: RNCC: 5 | RNVC: 2

1 Feb 1965

5110-12-326-3022
Cable Stripper Blade

123263022
20516: RNCC: 3 | RNVC: 2
2051: RNCC: 5 | RNVC: 9

28 Aug 1991

5110-12-340-9103
File Holder

123409103
7400002: RNCC: 3 | RNVC: 2

3 Jul 1996

5110-12-331-5994
Diagonal Cutting Pliers

123315994
7681125: RNCC: 3 | RNVC: 2
4003773018544: RNCC: 5 | RNVC: 2

26 May 1993

5110-21-806-2359

5110-99-254-9737
Trimmin Knife Blade

992549737
0-11-221: RNCC: 3 | RNVC: 1

25 Apr 1991

5110-15-211-6715
Lama Per Seghetto A

152116715
274315: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-422-9549
Hand Operated Wire Rope Cutter

144229549
412-30: RNCC: 3 | RNVC: 2
3799054: RNCC: 5 | RNVC: 2
3148511754733: RNCC: 5 | RNVC: 2
412-30: RNCC: 5 | RNVC: 2

24 Mar 1988

5110-99-350-6562
Tool

993506562
NO PRIMARY REF 99-350-6562: RNCC: 3 | RNVC: 2
1C8532: RNCC: 5 | RNVC: 2

14 Sep 2005

5110-66-012-4456
Firmer Chisel

660124456
737 3-4IN: RNCC: 3 | RNVC: 2
16-812: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
101: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-27-010-6630
Hand File

270106630
99999-NIIN-DA0037296: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-99-138-1323

5110-22-607-9066
Saw Handle

226079066
0709 90X31: RNCC: 3 | RNVC: 2

19 Aug 2004

5110-66-113-5248
Hand Cape Chisel

661135248
DMS 206: RNCC: 4 | RNVC: 1

20 Feb 1982

5110-17-123-8027
Mes Bladen

171238027
SPA-0107: RNCC: 3 | RNVC: 2

5 Jul 2011

5110-15-214-7098
Setaccio

152147098
SETACCIO: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-910-7715

5110-99-880-7811
Hand Reamer

5110-12-341-7862
Hand Hacksaw Frame

123417862
545-159: RNCC: 3 | RNVC: 2

26 Oct 1996

5110-15-232-0547
Coltello

152320547
367/300X30: RNCC: 3 | RNVC: 2
511015E064520: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-199-0735
Straight Trimmers Shears

151990735
3695-295: RNCC: 3 | RNVC: 2

12 Jan 2005

5110-15-208-7682
Tenaglie

152087682
4TANFLCNCN160: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-33-206-0992
Hand Metal Stamping Die

332060992
0303505: RNCC: 3 | RNVC: 2

6 Aug 2007

5110-15-165-3977
Coltello Multiuso C

151653977
220B: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-211-0530
Tagliapiastrelle

152110530
ART.44P: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-209-2435
Tronchese Da Mm. 21

152092435
MM210: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-221-4840
Veneer Hand Saw

222214840
STIKSAV 12IN: RNCC: 3 | RNVC: 2

2 Aug 1973

5110-21-639-4071
Adz Handle

216394071
39GP10: RNCC: 4 | RNVC: 1

1 Feb 1965

5110-98-854-7659

5110-66-013-7417
Fore Plane

5110-66-013-5509

5110-15-236-8880
Scalpello

152368880
SCARI 1425: RNCC: 3 | RNVC: 2

27 Aug 2007

5110-21-849-7782
Blacksmith's Chisel

218497782
85: RNCC: 3 | RNVC: 1
1F14980: RNCC: 5 | RNVC: 2
5110-0087: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-17-701-4834
Hand Reamer Set

177014834
NO PRIMARY REF17-701-4834: RNCC: 3 | RNVC: 2
17036: RNCC: 5 | RNVC: 9

30 Sep 1971

5110-99-721-6387
Cutting Tool

997216387
TPMR090204-518TIC: RNCC: 3 | RNVC: 2

12 Feb 1986

5110-12-346-9356
Hand Operated Cable Cutter

123469356
9511B210: RNCC: 3 | RNVC: 9
9511210: RNCC: 5 | RNVC: 9

29 Sep 1998

5110-14-530-3580
Decoupejoin Element

145303580
245A.M4: RNCC: 3 | RNVC: 2
3148511582152: RNCC: 5 | RNVC: 2

5 Jun 2002

5110-22-609-9341
Dimpling Punch

226099341
VBW-240-5: RNCC: 3 | RNVC: 2

15 Mar 2005

5110-15-123-9781
Sega A Nastro Per M

151239781
2818-13: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-22-608-5000
Hand File

226085000
1-160-06-2-3: RNCC: 3 | RNVC: 2

21 Oct 2004

5110-12-148-5980
Hand Reamer

121485980
100.08.000: RNCC: 3 | RNVC: 2
TYPE:D-8-9MM: RNCC: 5 | RNVC: 2
101301: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-201-3834
Rabbet Plane

142013834
NO PRIMARY REF14-201-3834: RNCC: 3 | RNVC: 2
2517: RNCC: 5 | RNVC: 9
401E26: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-426-2222
Diagonal Cutting Pliers

144262222
192.16EG: RNCC: 3 | RNVC: 2
192-16EG: RNCC: 5 | RNVC: 2
3148511445303: RNCC: 5 | RNVC: 2
0714 01 52: RNCC: 5 | RNVC: 2
0715 01 88: RNCC: 5 | RNVC: 2
0144530: RNCC: 5 | RNVC: 2

9 Aug 1988

5110-25-103-3208

5110-25-103-3206

5110-15-184-7306
Ferro Doppio Incas

151847306
3IANISCN18: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-66-094-3209

5110-66-056-3943
Therm Wire Stripper

660563943
PM1056H: RNCC: 3 | RNVC: 1

6 Apr 1973

5110-17-117-1593
Kite Cutter

171171593
AP1625LDW-001: RNCC: 3 | RNVC: 2

15 Dec 2004

5110-27-010-4637
Plumber's Saw Blade

270104637
07002YD0065: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-21-889-5043
Craftsmans Kn Blade

218895043
C-6-B: RNCC: 3 | RNVC: 2

3 Apr 1982

5110-12-177-5814
Locheisen

121775814
6888-3X15: RNCC: 3 | RNVC: 9

7 Feb 1979

5110-15-213-6663
Kit Montaggio Inser

152136663
SRM0508D: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-197-2557
Screw Thread Insert Breaker

151972557
PN UAS 00023713: RNCC: 3 | RNVC: 2
5120F76020841: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-165-3756
Ricambio Per Taglie

151653756
221AR: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-66-149-8159
Hand Metal Cutting Shears

661498159
NO PRIMARY REF 66-149-8159: RNCC: 3 | RNVC: 2
07284502: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-12-141-1373
Hand Masonry Drill

121411373
600007: RNCC: 3 | RNVC: 2
98-1-2-7-6: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-221-4762
Ratchet Bit Brace

222214762
BORSVING M/SKRALLE: RNCC: 3 | RNVC: 2

31 Jul 1973

5110-22-601-5261
Craftsman's Knife

226015261
0696 520 7: RNCC: 5 | RNVC: 2

9 Oct 2002

5110-12-353-1890
Hand Drill

123531890
5.012.4: RNCC: 3 | RNVC: 2
508/2: RNCC: 5 | RNVC: 2

8 Feb 2001

5110-14-570-2874
Hand Cape Chisel

145702874
7211160001: RNCC: 3 | RNVC: 2

6 Dec 2011

5110-15-197-2559
Screw Thread Insert Breaker

151972559
PN UAS 00023720: RNCC: 3 | RNVC: 2
5120F76020848: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-216-1430
Portalima A Fresa

152161430
1338A: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-236-7970
Tagliatubi Per Rame

152367970
7.0001: RNCC: 3 | RNVC: 2
511015E051652: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-12-357-6631
Single Bow Cutting Punch

123576631
305/2: RNCC: 3 | RNVC: 2

10 Jul 2002

5110-15-132-5197
Tronchesi A Doppia

151325197
584: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-232-9351
Troncabulloni

152329351
998.A1: RNCC: 3 | RNVC: 2

19 Jul 2007

5110-99-942-0338
Hand Reamer

999420338
BS122PT2: RNCC: 4 | RNVC: 1
H02099: RNCC: 5 | RNVC: 2
DEFSTAN51-9: RNCC: 6 | RNVC: 9
1/4" HAND TAPER PIN REAMER: RNCC: 6 | RNVC: 9
02-5602: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-840-8217

5110-15-123-2377
Scalpello Nervato M

151232377
35-150X20-0: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-325-3210
Craftsman's Knife

143253210
3203: RNCC: 3 | RNVC: 2
3203: RNCC: 5 | RNVC: 1
85-686-3580: RNCC: 6 | RNVC: 9

2 Jul 1975

5110-27-058-9521
Hand Metal Cutting Shears

270589521
J16-180B: RNCC: 2 | RNVC: 1

7 May 2013

5110-15-186-5598
Punzoni Serie Compl

151865598
3644A: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-208-8239
Alesatore

152088239
3AANPERMD26: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-125-7680
Tronchesino

151257680
2667: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-219-9975
Spazzola

152199975
MB69: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-17-701-5737
Hand File

177015737
12301201 NICHOLSON: RNCC: 3 | RNVC: 2

14 May 1970

5110-12-386-2787
Hand Belt Cutter

123862787
50.000.193: RNCC: 3 | RNVC: 2

22 Aug 2011

5110-15-208-4918
Alesatore Serie

152084918
3AAXFCFRDP31S2-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-141-0476

5110-98-855-0482
Nut Splitting Tool

5110-21-877-4575
Pocket Knife

218774575
1550-6: RNCC: 3 | RNVC: 2
5110-1264: RNCC: 6 | RNVC: 9

24 Jan 1978

5110-12-129-6393
Compass Saw Blade

121296393
NO PRIMARY REF 12-129-6393: RNCC: 3 | RNVC: 2
93 3/4-300: RNCC: 5 | RNVC: 9
933-4-300: RNCC: 5 | RNVC: 9

30 May 1969

5110-25-102-7807

5110-99-465-3758

5110-66-010-1310
Glass Cutter

660101310
1073: RNCC: 3 | RNVC: 2
511: RNCC: 3 | RNVC: 2
263-24: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-14-256-8843
Single Bow Cutting Punch

142568843
4637-19: RNCC: 3 | RNVC: 9

1 Jan 1969

5110-99-617-1331
Hand Reamer

996171331
110079-16929: RNCC: 3 | RNVC: 2
110079-16929: RNCC: 5 | RNVC: 9

25 Apr 1991

5110-22-121-1782
Diagonal Cutting Pliers

221211782
2128D-200: RNCC: 3 | RNVC: 2

11 Dec 1995

5110-22-619-3135
Ax Holder

226193135
91004: RNCC: 3 | RNVC: 2

17 Jun 2009

5110-12-122-2494

5110-15-062-5545
Tinner's Hollow Cutting Punch

150625545
3702-8: RNCC: 3 | RNVC: 2

31 May 1981

5110-15-212-7465
Serie Penetrametri

152127465
DIN-54-109: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-722-8752

5110-12-131-3852
Firmer Gouge

121313852
DIN5142-B26GA: RNCC: 2 | RNVC: 2
5110-0024-33: RNCC: 5 | RNVC: 9
DIN5142B26GA: RNCC: 5 | RNVC: 9
TL5110-0024-33: RNCC: 5 | RNVC: 9
165-26: RNCC: 5 | RNVC: 9
165-89-26: RNCC: 5 | RNVC: 9
B26GADIN5142: RNCC: 5 | RNVC: 9
5110-024-33: RNCC: 5 | RNVC: 9

30 May 1969

5110-98-107-5979
Hand File

981075979
250MM,REGULAR,BODY: RNCC: 5 | RNVC: 9

4 Nov 1983

5110-12-388-5686
Hand Cable Stripper

123885686
1830864: RNCC: 3 | RNVC: 2
1830864: RNCC: 5 | RNVC: 2
4010886855232: RNCC: 5 | RNVC: 2
8148: RNCC: 5 | RNVC: 2
4010886855232: RNCC: 5 | RNVC: 2
8148: RNCC: 5 | RNVC: 2

2 Apr 2012

5110-21-109-8661

5110-21-639-3121

5110-17-707-7177
Hand Reamer

177077177
NO PRIMARY REF 17-707-7177: RNCC: 3 | RNVC: 2
41R2278: RNCC: 6 | RNVC: 9

29 Jan 1973

5110-99-788-2559
Hand Hacksaw Blade

997882559
AA26E: RNCC: 3 | RNVC: 2
BS1024: RNCC: 3 | RNVC: 2
3806-250-24: RNCC: 3 | RNVC: 2
BS1919: RNCC: 4 | RNVC: 1

25 Apr 1991

5110-15-212-3612
Tenaglie Da 200 Mm.

152123612
735-706: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-16-006-1651
Hand File

160061651
286211633015: RNCC: 3 | RNVC: 2
PZP 300/1: RNCC: 5 | RNVC: 2
8595055900969: RNCC: 5 | RNVC: 2

9 Dec 2008

5110-21-895-4471
Craftsman's Knife

218954471
2: RNCC: 3 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

20 May 1984

5110-15-161-8674
Serie Lime Nicholso

151618674
SERIE LIME NICHOLSON CHIAVI 4 1/: RNCC: 3 | RNVC: 2

1 Oct 2000

5110-15-210-7067
Giravite A Croce Po

152107067
A1480/0-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-051-9615
File Smooth Paralle

990519615
NO PRIMARY REF 99-051-9615: RNCC: 3 | RNVC: 2
37-50023: RNCC: 5 | RNVC: 2

11 Dec 1995

5110-15-160-1704
Tronchesine

151601704
F720042251: RNCC: 2 | RNVC: 2

6 Oct 2000

5110-15-137-8358
Serie Lime Ad Ago

151378358
2645/2-160: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-21-104-9567

5110-99-127-5129

5110-21-639-4001

5110-12-312-7720
Hand Metal Cutting Punch And Die

123127720
101580: RNCC: 3 | RNVC: 2
2110: RNCC: 5 | RNVC: 9
3510: RNCC: 5 | RNVC: 9

3 Feb 1988

5110-15-219-4634
Svasatore 3 Tagl.Ci

152194634
02087023: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-209-4323
Cutter Metallici La

152094323
C5281/2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-943-0717
Hand Reamer

999430717
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
F1FA16511: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-175-2984
Rip Hand Saw

121752984
06456009: RNCC: 3 | RNVC: 9
FE456-09: RNCC: 3 | RNVC: 9

6 Sep 1978

5110-21-639-5807
Hand Metal Stamping Die Set

216395807
101: RNCC: 3 | RNVC: 1
GGGD280: RNCC: 4 | RNVC: 1
31630: RNCC: 5 | RNVC: 2
S7111-I01: RNCC: 5 | RNVC: 2
1F143500: RNCC: 6 | RNVC: 9
313414: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-21-102-7682

5110-25-100-8882
Glasskjaer Hjulsett

251008882
NO PRIMARY REF25-100-8882: RNCC: 3 | RNVC: 2
41-2518-700-510: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-15-186-0905
Stelo Diritto Sicut

151860905
9729G-20: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-384-9587
Hand Rasp

123849587
52.000.011: RNCC: 3 | RNVC: 2
52.000.011: RNCC: 5 | RNVC: 2

13 Apr 2011

5110-27-010-6712
Hand File

270106712
99999-NIIN-DA0037113: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-12-309-0775
Hand File

123090775
2182162: RNCC: 3 | RNVC: 2
2-311-16-2-0: RNCC: 3 | RNVC: 2
2182-160-2: RNCC: 5 | RNVC: 2
51402210: RNCC: 5 | RNVC: 2

11 Dec 1986

5110-12-307-9693
Hand Cold Chisel

123079693
112: RNCC: 3 | RNVC: 2
1960-5: RNCC: 3 | RNVC: 2
356 HS: RNCC: 3 | RNVC: 2
4000896008759: RNCC: 5 | RNVC: 2
70080002: RNCC: 5 | RNVC: 2
4010886648315: RNCC: 5 | RNVC: 2
6483100: RNCC: 5 | RNVC: 2

15 Aug 1986

5110-21-817-0193
Hand Reamer Arbor

218170193
CAT817-7: RNCC: 3 | RNVC: 2

28 Aug 1964

5110-15-236-9640
Tronchese A Doppia

152369640
2565: RNCC: 3 | RNVC: 2
511015E034554: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-27-010-6624
Hand File

270106624
99999-NIIN-DA0037183: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-12-123-4988
Bolt Cutter

121234988
TL5110-0006-030: RNCC: 2 | RNVC: 2
430020: RNCC: 3 | RNVC: 2
00.19.29.86: RNCC: 5 | RNVC: 2
450-880: RNCC: 5 | RNVC: 9
178/36: RNCC: 5 | RNVC: 9
643971: RNCC: 5 | RNVC: 9
6301-45-3: RNCC: 5 | RNVC: 9
169121803: RNCC: 5 | RNVC: 9
672-900: RNCC: 5 | RNVC: 9
430-910: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-942-0184

5110-20-003-4550
Diagonal Cutting Pliers

200034550
B50258-1: RNCC: 3 | RNVC: 2

11 Jul 2007

5110-14-408-8350
Hand Cable Stripper

144088350
838.S25: RNCC: 3 | RNVC: 2
838S25: RNCC: 5 | RNVC: 2
91639876: RNCC: 5 | RNVC: 2
838 S 25: RNCC: 5 | RNVC: 2
3148512068921: RNCC: 5 | RNVC: 2
0206892: RNCC: 5 | RNVC: 9

2 Apr 1986

5110-15-137-8577
Spatola Acciaio

151378577
6302-40: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-332-9464
Hand Reamer Set

123329464
WN50F-4-5-6-7-8-9-10: RNCC: 3 | RNVC: 2

8 Oct 1993

5110-12-141-1702
Hand File

121411702
2152102: RNCC: 3 | RNVC: 2
2402-100-2: RNCC: 3 | RNVC: 2
2152-100-2: RNCC: 5 | RNVC: 2
D50X2DIN8342: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-150-2127
Hand Hacksaw Blade

661502127
NO PRIMARY REF 66-150-2127: RNCC: 3 | RNVC: 2
06900201: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-21-104-9543
Dovetail Saw Blade

211049543
SW640: RNCC: 3 | RNVC: 2
4591B: RNCC: 5 | RNVC: 9
1F115650: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-12-173-9342
Zylinderkop Fraeser

121739342
4650B: RNCC: 3 | RNVC: 2

23 May 1978

5110-14-459-2665
Hand Operated Cable Cutter

144592665
324-80: RNCC: 3 | RNVC: 2
3272670284890: RNCC: 5 | RNVC: 2
85-694-4381: RNCC: 6 | RNVC: 9

19 Nov 1992

5110-66-027-8866
Drilling Post

660278866
ADE(V)76-30: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-99-891-6483
Spokeshave

998916483
1-12-051: RNCC: 3 | RNVC: 2

28 Jan 1991

5110-27-010-6587
Hand File

270106587
99999-NIIN-DA0037139: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-66-149-8118
Bolt Cutter

661498118
NO PRIMARY REF 66-149-8118: RNCC: 3 | RNVC: 2
07140303: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-99-474-5661
Rotating Tool

994745661
HU17706: RNCC: 3 | RNVC: 2

21 Mar 2003

5110-15-213-2527
Cesoia Per Tagliare

152132527
ART3109: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-433-4740

5110-99-433-4745

5110-20-003-8151
Ladies' Scissors

200038151
28: RNCC: 3 | RNVC: 2

3 Jan 2008

5110-17-700-9848
Firmer Chisel

177009848
1111.22: RNCC: 3 | RNVC: 2
1A2745: RNCC: 6 | RNVC: 9

14 May 1970

5110-15-137-8359
Set Raspe Per Marmo

151378359
2651: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-136-0615
Cesoia Per Oreficie

151360615
2042: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-99-724-2106

5110-15-003-7571
Steel Strapping Cutter

150037571
53-137: RNCC: 3 | RNVC: 2
(241)A017053-137: RNCC: 5 | RNVC: 2

21 Nov 2013

5110-99-910-4240
Firmer Chisel

999104240
DEF STAN 51-11:PART 27-H425: RNCC: 2 | RNVC: 2
H425: RNCC: 3 | RNVC: 2
DEF STAN 51-11:PART 27: RNCC: 5 | RNVC: 2
H425: RNCC: 6 | RNVC: 9
FA11327: RNCC: 6 | RNVC: 9
910-4240: RNCC: 6 | RNVC: 9
1A419: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-474-6316
Gripper Pad Set

994746316
NO PRIMARY REF 99-474-6316: RNCC: 3 | RNVC: 2
L-5215: RNCC: 5 | RNVC: 2

19 Sep 2006

5110-25-100-4305
One Man Crosscut Saw

251004305
NO PRIMARY REF25-100-4305: RNCC: 3 | RNVC: 2
41-6972-100-390: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-21-639-4718
Hand File

216394718
81-13550: RNCC: 3 | RNVC: 2
920547: RNCC: 3 | RNVC: 2
920342: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-14-244-0786

5110-21-639-5247
Hand Diamond Point Chisel

216395247
MS17069-6: RNCC: 3 | RNVC: 2
39GP43: RNCC: 4 | RNVC: 1

4 Jun 1968

5110-15-219-5521
Forbice Olfa Dentat

152195521
SCS-1: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-872-1991
Hand Drill

218721991
5803: RNCC: 3 | RNVC: 2

28 Jul 1976

5110-22-609-3829
Hand Operated Cable Cutter

226093829
54 97 510 085: RNCC: 3 | RNVC: 2
5497510085: RNCC: 5 | RNVC: 2

19 Jan 2005

5110-14-318-2533

5110-22-607-5555
Hand Metal Cutting Punch And Die Set

226075555
543-614: RNCC: 3 | RNVC: 2

1 Jul 2004

5110-22-614-9757
Hand File

226149757
502670300: RNCC: 3 | RNVC: 2

8 Mar 2007

5110-21-639-4831
Hand File

216394831
FF544G: RNCC: 3 | RNVC: 2
39GP53: RNCC: 4 | RNVC: 1

27 Jun 1966

5110-15-138-1393
Lima Triangolare

151381393
990083: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-21-639-3170
Hand Metal Cutting Shears

216393170
9CB: RNCC: 3 | RNVC: 2
39GP33: RNCC: 4 | RNVC: 1
1F122100: RNCC: 5 | RNVC: 2
REVM: RNCC: 5 | RNVC: 9

12 Aug 1963

5110-98-200-9268
Reamer Blade Set

982009268
NO PRIMARY REF 98-200-9268: RNCC: 3 | RNVC: 2
ST 15: RNCC: 5 | RNVC: 2

20 Feb 1987

5110-12-120-3824
Bow Saw

121203824
5510/3-800-1: RNCC: 3 | RNVC: 2
626-800-10: RNCC: 3 | RNVC: 2
640-800: RNCC: 3 | RNVC: 2
640-012: RNCC: 5 | RNVC: 2
BYDIN20142: RNCC: 5 | RNVC: 9
DIN20142B: RNCC: 5 | RNVC: 9
DIN20142-B: RNCC: 5 | RNVC: 9
2050-800-30: RNCC: 5 | RNVC: 9
BDIN20142: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-842-8282

5110-12-343-7627
Sealing Surface Milling Cutter

123437627
13 308: RNCC: 3 | RNVC: 2

23 Jul 1997

5110-21-105-0676
Hand Masonry Drill

211050676
1265-24: RNCC: 3 | RNVC: 2
GGGD691: RNCC: 4 | RNVC: 1
311961: RNCC: 6 | RNVC: 9
312886-28: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-21-637-4338
Hand Masonry Drill

216374338
MS17065-9: RNCC: 2 | RNVC: 2
1255-12: RNCC: 3 | RNVC: 2

4 Jun 1968

5110-15-212-3457
Lama Per Troncatric

152123457
1750-150LM.3: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-23-113-7812
Cardan Shaft For En

231137812
T813-01-80: RNCC: 3 | RNVC: 2

30 May 2003

5110-99-433-4514
Hand Reamer

994334514
NO PRIMARY REF 99-433-4514: RNCC: 3 | RNVC: 2
0275-12249: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-27-044-0862
Hand Metal Cutting Shears

270440862
J17-190: RNCC: 2 | RNVC: 1

6 Jan 2009

5110-12-140-3172
Hand File

121403172
DIN7261-D350-3: RNCC: 2 | RNVC: 2
D350-3DIN7261: RNCC: 5 | RNVC: 2
1393715128178137: RNCC: 5 | RNVC: 9
0808396402129: RNCC: 5 | RNVC: 9
TGL 48-74113,350X3: RNCC: 5 | RNVC: 9
C350X3DIN8337: RNCC: 5 | RNVC: 9
DIN7261D350-3: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-613-7482
Hand Hacksaw Blade

226137482
3851-13-0.6-R-10: RNCC: 3 | RNVC: 2

25 Jul 2006

5110-15-123-6423
Coltello Modello Ju

151236423
5282/0: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-13-114-1579
Craftsman's Knife

131141579
4: RNCC: 3 | RNVC: 2

10 Jun 1992

5110-99-717-9766
Fore Plane

997179766
6: RNCC: 3 | RNVC: 2

1 Apr 1980

5110-98-205-6551
Hand File

982056551
DFAMPD00235 E: RNCC: 2 | RNVC: 2

6 Jul 2001

5110-15-217-6397
Serie Scalpelli A F

152176397
SERIESCALPELLIAFERRO: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-248-3510

5110-15-211-6679
Seghetto Per Legno

152116679
SEGHETTOXLEGNO: RNCC: 3 | RNVC: 2

16 Nov 2005

Load More Results