What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 50 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 50of 112

5110-00-012-2259
Hand Reamer

000122259
810435: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-116-9397
End Cutting Nippers

001169397
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 11 TY4CL1: RNCC: 5 | RNVC: 1
14100083: RNCC: 5 | RNVC: 2
B107.11: RNCC: 5 | RNVC: 9
B107.11 TY4CL1: RNCC: 5 | RNVC: 9
1099: RNCC: 5 | RNVC: 9

5 Sep 1973

5110-00-449-7314
Gasket Cutting Punch

004497314
5110-00-449-7314: RNCC: 3 | RNVC: 2
FRS PGH8-2: RNCC: 3 | RNVC: 2
741: RNCC: 5 | RNVC: 2
PGH8-2: RNCC: 5 | RNVC: 9
HP8: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-115-2358
Wire Stripper Blade Set

001152358
L-5211: RNCC: 3 | RNVC: 2
L-5211: RNCC: 3 | RNVC: 2
VG95236T16AA009: RNCC: 5 | RNVC: 2
L5211: RNCC: 5 | RNVC: 2
L-5211: RNCC: 5 | RNVC: 2
L5211: RNCC: 5 | RNVC: 2
7904444-00: RNCC: 5 | RNVC: 2

13 Sep 1968

5110-00-720-0873
Keyhole Saw Blade

1 Jan 1963

5110-01-010-7892
Hand Wire Stripper

010107892
45-179: RNCC: 3 | RNVC: 2
GGG-S-665: RNCC: 5 | RNVC: 9
GGG-S-665 TY2CL2STA: RNCC: 5 | RNVC: 9

6 Oct 1975

5110-00-003-0537
Tube Deburring Tool Stem

000030537
D9850-13-12: RNCC: 3 | RNVC: 2

17 May 1972

5110-00-003-1537
Tube Cutter Cutting Wheel

000031537
D9853-214: RNCC: 3 | RNVC: 9

24 May 1972

5110-00-095-3278
Hand Reamer

000953278
TAM1994: RNCC: 3 | RNVC: 2

1 Jan 1961

5110-00-005-8056
Adjustment Ratchet

000058056
D9872-113: RNCC: 3 | RNVC: 9

19 Jun 1972

5110-00-050-9934
Bench Wire Stripper

000509934
766K: RNCC: 3 | RNVC: 1

1 Jan 1961

5110-00-051-3936
Wire Cutting And Skinning Tool

000513936
99050024: RNCC: 3 | RNVC: 2
A26251-1: RNCC: 5 | RNVC: 9
99050024: RNCC: 5 | RNVC: 9
A26251-1: RNCC: 5 | RNVC: 9

1 Jan 1961

5110-00-144-5188
Inl Cutter Assembly

001445188
PWA251-24: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-888-8738
Hand Reamer Set

008888738
901354-1: RNCC: 3 | RNVC: 2

1 Apr 1968

5110-01-174-4495
Pocket Knife

011744495
GA198: RNCC: 3 | RNVC: 2

19 Mar 1984

5110-00-348-4778
Hand Reamer

003484778
B94.2: RNCC: 3 | RNVC: 1
GH343: RNCC: 3 | RNVC: 2
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL3: RNCC: 5 | RNVC: 9
G343: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-677-5706
Fastener Collar Cutter

006775706
105-10: RNCC: 3 | RNVC: 2
42-10: RNCC: 5 | RNVC: 9
105-10: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-684-3920
Knockout Punch And Die

006843920
GGG-P-836: RNCC: 4 | RNVC: 1
GGG-P-836 TY1CL1: RNCC: 5 | RNVC: 1
25340: RNCC: 5 | RNVC: 2
5110-00-684-3920: RNCC: 5 | RNVC: 2
730BB-11/16: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-595-9282
Hand Reamer Set

005959282
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY8CL2GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
A-A-2930: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-1049
Hand Boilermaker's Chisel

005961049
MS228075: RNCC: 3 | RNVC: 9
4556082: RNCC: 5 | RNVC: 2
4556082: RNCC: 5 | RNVC: 9
4556082: RNCC: C | RNVC: 1

1 Jan 1963

5110-00-055-6856
Cable Cutter Assy

000556856
781595-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-260-1642
Hand Reamer

002601642
B94.2: RNCC: 3 | RNVC: 1
C24516: RNCC: 5 | RNVC: 2
21244: RNCC: 5 | RNVC: 2
712-046168: RNCC: 5 | RNVC: 2
GGG-R-180: RNCC: 5 | RNVC: 9
A-A-2928: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-273-0203
Riffler

002730203
A-A-2462: RNCC: 4 | RNVC: 1
GGG-F-331: RNCC: 5 | RNVC: 9
MS15675-1: RNCC: 5 | RNVC: 9
GGG-F-331 TY20CL8: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-004-5965
Die Assembly Ram

010045965
ZT186802-1-4-28: RNCC: 3 | RNVC: 2

10 Jun 1975

5110-00-293-1458
Hand Reamer

002931458
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY1CL2GRB: RNCC: 5 | RNVC: 9
108CS 1/2 IN.: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-640-5424
Firmer Chisel

006405424
B107.410: RNCC: 3 | RNVC: 1
5110-00-640-5424: RNCC: 3 | RNVC: 2
B107.410 CAT44 TY2: RNCC: 5 | RNVC: 1
309: RNCC: 5 | RNVC: 2
GGG-C-311 TY1CL4STA OR C: RNCC: 5 | RNVC: 9
309: RNCC: 5 | RNVC: 9
GGG-C-311: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-640-6734
Fore Plane

006406734
5110-00-640-6734: RNCC: 3 | RNVC: 2
12-906: RNCC: 5 | RNVC: 2
12-906: RNCC: 5 | RNVC: 2
GGG-P-436: RNCC: 5 | RNVC: 9
MS16390-3: RNCC: 5 | RNVC: 9
GGG-P-436 TY6CLCSZ18: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-162-2203
Bent Trimmers Shears

001622203
5110-00-162-2203: RNCC: 3 | RNVC: 2
GGG-S-278: RNCC: 5 | RNVC: 9
GGG-S-278 TY1CL2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-4365
Hand Reamer

005964365
53C20381-2470: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-278-1063
Support Ramp Assembly

002781063
2624304: RNCC: 3 | RNVC: 2

8 Aug 1973

5110-00-273-0101
Cable Saw

002730101
15-643: RNCC: 3 | RNVC: 2
GGG-S-65: RNCC: 4 | RNVC: 1
GGG-S-65 TY3: RNCC: 5 | RNVC: 1
P93: RNCC: 5 | RNVC: 2
MS16327-1: RNCC: 5 | RNVC: 9
24: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-268-2904
Hand File

002682904
A-A-2454: RNCC: 4 | RNVC: 1
40972: RNCC: 5 | RNVC: 2
GGG-F-331 TY21CL2: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
40972: RNCC: 5 | RNVC: 9
34868: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-595-9707
Hand Reamer

005959707
53C20381-12450: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-247-1566
Bearing Scraper

002471566
GGG-S-113: RNCC: 4 | RNVC: 1
GGG-S-113 TY1: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-095-6702
Hand Reamer

000956702
HSP1397: RNCC: 3 | RNVC: 2
HSP1397: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-012-2251
Hand Reamer

000122251
810430: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-012-2250
Hand Reamer

000122250
810429: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-240-6023
Chisel Bar

002406023
B107.410: RNCC: 3 | RNVC: 1
695: RNCC: 3 | RNVC: 2
B107.410 CAT48 TY1CL1: RNCC: 5 | RNVC: 1
AJA-695: RNCC: 5 | RNVC: 2
GGG-B-101 TY1: RNCC: 5 | RNVC: 9
GGG-B-101: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-268-3883
Craftsman's Knife

002683883
5110-00-268-3883: RNCC: 3 | RNVC: 2
GGG-K-481: RNCC: 5 | RNVC: 9
GGG-K-481 TY2CL1ST2: RNCC: 5 | RNVC: 9
DEXTER7: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-7621
Hand File

002397621
A-A-2434: RNCC: 4 | RNVC: 1
39881: RNCC: 5 | RNVC: 2
39881: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-146-2583
Pipe Cutter Cutting Wheel

011462583
E-1032-S: RNCC: 3 | RNVC: 2
44190: RNCC: 5 | RNVC: 2

26 Jan 1983

5110-00-293-3036
Hand Reamer

002933036
B94.2: RNCC: 3 | RNVC: 1
764-1210-000: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
121RL: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-233-9716
Hand Rasp

002339716
A-A-2326: RNCC: 4 | RNVC: 1
17615N: RNCC: 5 | RNVC: 2
GGG-F-325 TY24STB: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
17615: RNCC: 5 | RNVC: 9
17615: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-241-9140
Hand File

002419140
5110-00-241-9140: RNCC: 3 | RNVC: 2
08768: RNCC: 5 | RNVC: 2
A-A-2316: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
08768: RNCC: 5 | RNVC: 9
GGG-F-325 TY13CL2STB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-131-4341
Hand Reamer

001314341
B94.2: RNCC: 3 | RNVC: 1
TFIM25.0057-404: RNCC: 3 | RNVC: 2
TLD 7311 R-4-4: RNCC: 5 | RNVC: 2
TLD 7311 R-4-4: RNCC: 5 | RNVC: 9

21 Mar 1975

5110-00-176-2921
Blade Cutter Holder

001762921
HSP1403: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-277-9807
Single Bow Cutting Punch

002779807
500-7-A-7/8: RNCC: 3 | RNVC: 2
GGG-P-833: RNCC: 4 | RNVC: 1
GGG-P-833 TY1CLBST2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-238-9658
Hand File

002389658
A-A-2320: RNCC: 4 | RNVC: 1
13081: RNCC: 5 | RNVC: 2
73430000: RNCC: 5 | RNVC: 2
73430000: RNCC: 5 | RNVC: 2
GGG-F-325 TY17STA: RNCC: 5 | RNVC: 9
13081: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-0644
File Holder

002390644
5110-00-239-0644: RNCC: 3 | RNVC: 2
39430: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-156-0092
Hand File

001560092
A-A-2321: RNCC: 4 | RNVC: 1
A-A-2321 TY3: RNCC: 5 | RNVC: 1
14665: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
14665: RNCC: 5 | RNVC: 9
GGG-F-325 TY18CL3: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-156-0128
Hand File

001560128
491: RNCC: 3 | RNVC: 2
A-A-2433: RNCC: 5 | RNVC: 9
GGG-F-331 TY11CL2: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-156-0218
Hand File

001560218
DWG5110-00-156-0218: RNCC: 3 | RNVC: 2
A-A-2311: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-156-0131
Hand File

001560131
A-A-2315: RNCC: 4 | RNVC: 1
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY12CL1: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-250-2525
Miter Box

002502525
PD5110-00-250-2525: RNCC: 3 | RNVC: 2
GGG-M-451: RNCC: 5 | RNVC: 9
GGG-M-451 TY1: RNCC: 5 | RNVC: 9
36321: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-224-9348
Circle Cutter

002249348
GGG-C-00748: RNCC: 4 | RNVC: 1
GGG-C-00748 TY4STA: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-229-5172
Hand Wire Stripper

002295172
GGG-S-665: RNCC: 4 | RNVC: 1
GGG-S-665 TY2CL2STA: RNCC: 5 | RNVC: 1

1 Jan 1961

5110-00-630-2192
Hand File

006302192
3213: RNCC: 3 | RNVC: 2

1 Jan 1960

5110-01-159-1808
Bushing Reamer Set

011591808
J-28489-2: RNCC: 3 | RNVC: 2
2CC659: RNCC: 5 | RNVC: 2
2CC659: RNCC: 5 | RNVC: 9

4 Aug 1983

5110-00-224-3861
Hand Reamer

002243861
50031BTYPEA1GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-224-3863
Hand Reamer

002243863
1.145IN: RNCC: 3 | RNVC: 2
1.156IN: RNCC: 5 | RNVC: 9

19 Mar 1971

5110-00-289-0010
Hand Reamer Set

002890010
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY8CL1GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-203-6724
Hand Reamer

002036724
50031BTYPEA2GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-203-6747
Hand Reamer

002036747
50031BTYPEA2GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-204-0719
Hand File

002040719
A-A-2323: RNCC: 4 | RNVC: 1
16761: RNCC: 5 | RNVC: 2
07087000: RNCC: 5 | RNVC: 2
16761: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
16761: RNCC: 5 | RNVC: 9
GGG-F-325 TY20STA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-220-9551
Dimpling Punch

002209551
48C19983-5: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-221-1074
Blacksmith's Chisel

002211074
GGG-T-00563: RNCC: 4 | RNVC: 1
GGG-T-00563 TY1CL1: RNCC: 5 | RNVC: 1
45611: RNCC: 5 | RNVC: 2
MS16882-1: RNCC: 5 | RNVC: 9
GGG-T-563: RNCC: 5 | RNVC: 9
GGG-T-563 TY1CL1: RNCC: 5 | RNVC: 9
G10-1074: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-194-6049
Hand Reamer

001946049
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-240-7519
Hand Masonry Drill Holder

002407519
KTCDRBH: RNCC: 3 | RNVC: 2
MS17067-1: RNCC: 5 | RNVC: 9
GGG-D-691 TY4CL2STA: RNCC: 5 | RNVC: 9
GGG-D-691: RNCC: 5 | RNVC: 9
GGG-H-570: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-7627
Hand File

002397627
39923: RNCC: 3 | RNVC: 2
GGG-F-331 TY1CL3: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
A-A-2434: RNCC: 5 | RNVC: 9
39923: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-241-9163
Hand File

002419163
A-A-2322: RNCC: 4 | RNVC: 1
41F3: RNCC: 5 | RNVC: 2
16102: RNCC: 5 | RNVC: 2
16102: RNCC: 5 | RNVC: 9
GGG-F-325 TY19STC: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-162-2202
Pinking Shears

001622202
5110-00-162-2202: RNCC: 3 | RNVC: 2
CB9: RNCC: 5 | RNVC: 2
GGG-S-278 TY1CL3: RNCC: 5 | RNVC: 9
GGG-S-278: RNCC: 5 | RNVC: 9
CB9: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-058-2381
Hand Metal Stamping Die Set

000582381
RS-316-D: RNCC: 3 | RNVC: 2
3589: RNCC: 5 | RNVC: 2

1 Jan 1961

5110-00-220-9538
Dimpling Die

002209538
48C19983-20: RNCC: 3 | RNVC: 2
MIL-D-922: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-220-9550
Dimpling Punch

002209550
48C19983-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-221-8136
Hand Diamond Point Chisel

002218136
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL4: RNCC: 5 | RNVC: 1
10605: RNCC: 5 | RNVC: 2
G10-8136: RNCC: 5 | RNVC: 2
22906: RNCC: 5 | RNVC: 2
GGG-C-313: RNCC: 5 | RNVC: 9
B107.48 TY1CL4: RNCC: 5 | RNVC: 9
B107.48: RNCC: 5 | RNVC: 9
GGG-C-313 TY2STA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-618-3355
Ratchet Bit Brace

006183355
GGG-B-671: RNCC: 4 | RNVC: 1
GGG-B-671 TY1STBGR2CL2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-233-9697
Hand File

002339697
A-A-2448: RNCC: 4 | RNVC: 1
37193: RNCC: 5 | RNVC: 2
GGG-F-331 TY18CL7: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
37193: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-233-9710
Hand Rasp

002339710
A-A-2329: RNCC: 4 | RNVC: 1
59410: RNCC: 5 | RNVC: 2
19394: RNCC: 5 | RNVC: 2
2A501: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
19394: RNCC: 5 | RNVC: 9
GGG-F-325 TY27CL2STA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-149-1428
Riffler

001491428
36108: RNCC: 3 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
MS15678-2: RNCC: 5 | RNVC: 9
GGG-F-331 TY20CL11: RNCC: 5 | RNVC: 9
36108: RNCC: 5 | RNVC: 9
A-A-2465: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-149-1425
Riffler

001491425
36072: RNCC: 3 | RNVC: 2
GGG-F-331 TY20CL8: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
MS15675-2: RNCC: 5 | RNVC: 9
36072: RNCC: 5 | RNVC: 9
A-A-2462: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-3037
Hand Reamer

002933037
B94.2: RNCC: 3 | RNVC: 1
128RL: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
764-1280-000: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-12-126-1434
Hand Reamer

121261434
DIN206-A2,5-HSS: RNCC: 2 | RNVC: 2
301-A2,5: RNCC: 3 | RNVC: 2
F1111-2,5: RNCC: 3 | RNVC: 2
301-FORM A-2,5: RNCC: 5 | RNVC: 2
A2-5DIN206: RNCC: 5 | RNVC: 9
DIN 206-A 2,5-HSS: RNCC: 5 | RNVC: 9
DIN206-A-2,5-HSS: RNCC: 5 | RNVC: 9
DIN206-A2-5-HSS: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-126-3316
Glass Cutter

121263316
DIN7209-B: RNCC: 2 | RNVC: 2
BDIN7209: RNCC: 5 | RNVC: 2
DIN7209B: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-343-7249
Diagonal Cutting Pliers

123437249
66024160: RNCC: 3 | RNVC: 2
6602-165: RNCC: 5 | RNVC: 9
6602-4-165: RNCC: 5 | RNVC: 9
66024165: RNCC: 5 | RNVC: 9

17 Jul 1997

5110-00-113-0045
Cork Borer Sharpener

001130045
113-0045: RNCC: 3 | RNVC: 2
C8285: RNCC: 3 | RNVC: 9

21 Oct 1972

5110-00-561-2552
Gasket Cutter Blade Set

005612552
B256: RNCC: 3 | RNVC: 2

14 Nov 1974

5110-00-293-2494
Jeweler's Saw Blade

002932494
GGG-B-471: RNCC: 4 | RNVC: 1
GGG-B-471 TY2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-180-1024
Miter Box And Saw

001801024
GGGM451: RNCC: 2 | RNVC: 2

1 Jan 1963

5110-00-077-1710
Scraper Blade

000771710
85: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-293-2478
Adz Handle

002932478
NNH93GRADEA: RNCC: 4 | RNVC: 1

1 Jan 1963

5110-00-449-7315
Gasket Cutting Punch

004497315
742: RNCC: 3 | RNVC: 2
PGH8-3: RNCC: 5 | RNVC: 9
FRS PGH8-3: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-189-3378
Hand Reamer

001893378
B94.2: RNCC: 3 | RNVC: 1
21491: RNCC: 3 | RNVC: 2
1636: RNCC: 5 | RNVC: 1
1636: RNCC: 5 | RNVC: 9
21491: RNCC: 5 | RNVC: 9
GGG-R-180 TY5CL1STAGRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-014-2057
Reamer

000142057
T26823: RNCC: 3 | RNVC: 2

1 Jan 1961

5110-00-015-8343
Die Assembly

000158343
ZT3856-3-32: RNCC: 3 | RNVC: 2

1 Jan 1961

5110-00-449-7319
Gasket Cutting Punch

004497319
5110-00-449-7319: RNCC: 3 | RNVC: 2
FRS PGH8-7: RNCC: 3 | RNVC: 2
746: RNCC: 5 | RNVC: 2
PGH8-7: RNCC: 5 | RNVC: 9
HP18: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-022-9798
Diagonal Cutting Pliers

000229798
HL9BCP: RNCC: 3 | RNVC: 2
HL9: RNCC: 5 | RNVC: 2
HL9: RNCC: 5 | RNVC: 9
HL9CP: RNCC: 5 | RNVC: 9
HL9ACP: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-316-4782
Cyli Reseating Tool

003164782
3273296: RNCC: 3 | RNVC: 2
3273296: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-4195
Hand Reamer

001864195
161-0-6: RNCC: 3 | RNVC: 9
GGG-R-180 TY5CL1STAGRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-6727
Hand Reamer

001866727
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-188-0747
Hand Reamer

001880747
B94.2: RNCC: 3 | RNVC: 1
A-A-2928: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRB: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
102CS 1-3/8 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-224-3854
Hand Reamer

002243854
50031BTYPEA1GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-224-3868
Hand Reamer

002243868
50031BTYPEA1GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-224-3860
Hand Reamer

002243860
50031BTYPEA1GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-227-5037
Paring Chisel

002275037
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 44 TY2: RNCC: 5 | RNVC: 1
046298: RNCC: 5 | RNVC: 2
32-1: RNCC: 5 | RNVC: 2
828-C3201: RNCC: 5 | RNVC: 2
GGG-C-311 TY1CL8STA: RNCC: 5 | RNVC: 9
B107.44 TY2: RNCC: 5 | RNVC: 9
GGG-C-311: RNCC: 5 | RNVC: 9
32-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-221-0251
Hand Hacksaw Blade

002210251
GGG-B-451: RNCC: 4 | RNVC: 1
GGG-B-451 TY1GRBCL2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-220-9552
Dimpling Punch

002209552
48C19983-8: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-203-9367
Hand File

1 Jan 1963

5110-00-203-9804
Hand File

002039804
A-A-2320: RNCC: 4 | RNVC: 1
07084003: RNCC: 5 | RNVC: 2
13229: RNCC: 5 | RNVC: 2
13229: RNCC: 5 | RNVC: 2
16580: RNCC: 5 | RNVC: 2
GGG-F-325 TY17STB: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
13229: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-313-7087
Hand Reamer

003137087
13964A: RNCC: 3 | RNVC: 2
13964A: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-149-1418
Riffler

001491418
35982: RNCC: 3 | RNVC: 2
GGG-F-331 TY20CL1: RNCC: 5 | RNVC: 9
MS15668-2: RNCC: 5 | RNVC: 9
35982: RNCC: 5 | RNVC: 9
A-A-2456: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-149-1424
Riffler

001491424
36054: RNCC: 3 | RNVC: 2
A-A-2461: RNCC: 5 | RNVC: 9
GGG-F-331 TY20CL7: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
36054: RNCC: 5 | RNVC: 9
MS15674-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-212-8079
Keyway Cutter

002128079
C-3600-632: RNCC: 3 | RNVC: 2
C-3600-632: RNCC: 5 | RNVC: 2
C-3600-632: RNCC: 5 | RNVC: 2
C-3600-632: RNCC: 5 | RNVC: 9
C-3576-632: RNCC: 5 | RNVC: 9
C-3600-632: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-3282
Hand File

002393282
A-A-2450: RNCC: 4 | RNVC: 1
38045: RNCC: 5 | RNVC: 2
GGG-F-331 TY18CL9: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
38045: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-233-3883
Dimpling Punch

002333883
40B3907-3: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-233-7733
Hand File

002337733
A-A-2313: RNCC: 4 | RNVC: 1
GGG-F-325 TY10CL2STA: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-233-9691
Hand File

002339691
A-A-2432: RNCC: 4 | RNVC: 1
40260: RNCC: 5 | RNVC: 2
40260: RNCC: 5 | RNVC: 9
GGG-F-331 TY11CL1: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-8177
Turning Chisel

001868177
GGG-C-311: RNCC: 4 | RNVC: 1
MS16545-4: RNCC: 5 | RNVC: 9

1 Jan 1961

5110-00-188-0739
Hand Reamer

001880739
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRB: RNCC: 5 | RNVC: 9
102CS 1-1/8 IN.: RNCC: 5 | RNVC: 9
A-A-2928: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-188-0765
Hand Reamer

001880765
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRB: RNCC: 5 | RNVC: 9
102CS 1-15/16 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-198-4287
Hand Reamer

001984287
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY13GRB: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
216 SZ2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-178-0947
Crankshaft F Reamer

001780947
ST255: RNCC: 3 | RNVC: 2

19 Mar 1969

5110-00-149-1433
Riffler

1 Jan 1963

5110-00-237-8106
Hand Hacksaw Blade

002378106
GGG-B-451: RNCC: 4 | RNVC: 1
GGG-B-451 TY1GRB: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-239-3272
Hand File

002393272
5110-00-239-3272: RNCC: 3 | RNVC: 2
37305: RNCC: 5 | RNVC: 2
A-A-2450: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL9: RNCC: 5 | RNVC: 9
37305: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-203-5410
Hand Reamer

1 Jan 1963

5110-00-205-2917
Cable Cutter Blade

002052917
624-3827-001: RNCC: 3 | RNVC: 2

4 Apr 1973

5110-00-238-8296
Hand Diamond Point Chisel

002388296
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL4: RNCC: 5 | RNVC: 1
C-6: RNCC: 5 | RNVC: 2
864225PC42: RNCC: 5 | RNVC: 2
B107.44: RNCC: 5 | RNVC: 9
A-A-2507: RNCC: 5 | RNVC: 9
B107.44 TY1CL4: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-177-7287
Hand Wire Stripper

001777287
PD5110-00-177-7287: RNCC: 3 | RNVC: 2
45-178: RNCC: 5 | RNVC: 2
GGG-S-665 TY2CL2STB: RNCC: 5 | RNVC: 9
GGG-S-665: RNCC: 5 | RNVC: 9

15 Jan 1971

5110-00-203-4647
Hand File

002034647
A-A-2318: RNCC: 4 | RNVC: 1
GGG-F-325 TY16CL1STC: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-234-6566
Hand File

002346566
A-A-2314: RNCC: 4 | RNVC: 1
06898: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
06898: RNCC: 5 | RNVC: 9
GGG-F-325 TY11STA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-529-3452
Hand File

005293452
5110-00-529-3452: RNCC: 3 | RNVC: 2
A-A-2311: RNCC: 5 | RNVC: 9
GGG-F-325 TY7STD: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-199-0457
Hand Reamer

001990457
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL3: RNCC: 5 | RNVC: 9
1100S 11/32 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-223-1084
Floor Chisel

002231084
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 44 TY4: RNCC: 5 | RNVC: 1
G10-1084: RNCC: 5 | RNVC: 2
336: RNCC: 5 | RNVC: 2
53162: RNCC: 5 | RNVC: 2
1470: RNCC: 5 | RNVC: 9
55-147: RNCC: 5 | RNVC: 9
B107.44: RNCC: 5 | RNVC: 9
55-147: RNCC: 5 | RNVC: 9
B107.44 TY4: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-540-1860
Double Bow Cutting Punch

005401860
GGG-P-833: RNCC: 4 | RNVC: 1
GGG-P-833 TY1CLBST1SZ23: RNCC: 5 | RNVC: 1
3427A38: RNCC: 5 | RNVC: 2
01072: RNCC: 5 | RNVC: 2
149-2-1/8: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-149-1420
Riffler

001491420
31.897: RNCC: 3 | RNVC: 2
A-A-2457: RNCC: 5 | RNVC: 9
GGG-F-331 TY20CL3: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
MS15670-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-220-9557
Dimpling Punch

002209557
48C19983-6: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-222-4455
Draw Knife

002224455
500-1320: RNCC: 3 | RNVC: 2
7087A11: RNCC: 5 | RNVC: 2
GGG-K-471: RNCC: 5 | RNVC: 9
600-10: RNCC: 5 | RNVC: 9
890: RNCC: 5 | RNVC: 9
600: RNCC: 5 | RNVC: 9
GGG-K-471 TY1: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-121-5469
Silversmiths Riffler Set

001215469
84-76400: RNCC: 3 | RNVC: 1

28 Oct 1968

5110-00-227-5038
Paring Chisel

002275038
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 44 TY2: RNCC: 5 | RNVC: 1
046299: RNCC: 5 | RNVC: 2
32-2: RNCC: 5 | RNVC: 2
828-C3202: RNCC: 5 | RNVC: 2
B107.44 TY2: RNCC: 5 | RNVC: 9
GGG-C-311 TY1CL8STA: RNCC: 5 | RNVC: 9
GGG-C-311: RNCC: 5 | RNVC: 9
32-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-152-2014
India Diamond File

001522014
FT134: RNCC: 3 | RNVC: 2

3 Feb 1971

5110-00-163-5980
Tube Deburring Tool Stem

001635980
D9851-13-03: RNCC: 3 | RNVC: 2

7 Feb 1973

5110-00-142-4998
Crosscut Hand Saw

001424998
GGG-S-65: RNCC: 4 | RNVC: 1
GGG-S-65 TY5: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-937-7628
Hand Reamer

009377628
J-21089: RNCC: 3 | RNVC: 2
2KM39: RNCC: 5 | RNVC: 9
2KM39: RNCC: C | RNVC: 1

30 Jan 1967

5110-00-938-1050
Hot Line Stick Adapter

009381050
M4455-50: RNCC: 3 | RNVC: 9

27 Feb 1970

5110-00-095-2847
Hand Reamer

000952847
PWA2493: RNCC: 3 | RNVC: 2

1 Jan 1961

5110-00-200-6129
Hand Operated Cable Cutter

002006129
146B115-1: RNCC: 3 | RNVC: 2

21 Mar 1973

5110-00-299-8441
Rectangular Cutting Punch

002998441
GGG-P-833: RNCC: 4 | RNVC: 1
GGG-P-833 TY1CLASZ5: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-308-3782
Hand Operated Asbestos Cement Shingle Cutter

003083782
GGG-C-736: RNCC: 4 | RNVC: 1

1 Jan 1963

5110-00-490-3882
Die-Dimpling Female

004903882
40B3907-15: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-900-4241
Hand File

009004241
VIXEN: RNCC: 3 | RNVC: 1

1 Jan 1960

5110-00-293-1263
Single Bow Cutting Punch

002931263
147 SIZE 14: RNCC: 3 | RNVC: 2
51438: RNCC: 5 | RNVC: 2
GGG-P-833 TY1CLBST2: RNCC: 5 | RNVC: 9
GGG-P-833: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-3385
Hand Cold Chisel

002933385
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1
10213: RNCC: 5 | RNVC: 2
G10-3385: RNCC: 5 | RNVC: 2
11113: RNCC: 5 | RNVC: 2
C24LSS: RNCC: 5 | RNVC: 2
GGG-C-313 TY4CL2: RNCC: 5 | RNVC: 9
GGG-C-313: RNCC: 5 | RNVC: 9
B107.48: RNCC: 5 | RNVC: 9
B107.48 TY1CL2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-316-4772
Cyli Reseating Tool

003164772
3228389: RNCC: 3 | RNVC: 2
81127-S41-25220: RNCC: 3 | RNVC: 2
3228389: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-316-4774
Air Reseating Tool

003164774
3228394: RNCC: 3 | RNVC: 2
3275815: RNCC: 3 | RNVC: 2
3275815: RNCC: 5 | RNVC: 9
3228394: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-316-4785
Lube Reseating Tool

003164785
3273299: RNCC: 3 | RNVC: 2
3273299: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-260-0533
Hand File

002600533
40248: RNCC: 3 | RNVC: 2
A-A-2432: RNCC: 5 | RNVC: 9
40248: RNCC: 5 | RNVC: 9
GGG-F-331 TY11CL1: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-025-2277
Hand Reamer

000252277
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
764-1000-000: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
100RL: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-025-2288
Hand Reamer

000252288
B94.2: RNCC: 3 | RNVC: 1
162RL: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
764-1620-000: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-714-9133
Hydraulic Pipe Cutter

007149133
3890-12: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-254-6635
Double Bit Ax Handle

002546635
PD5110-00-254-6635: RNCC: 3 | RNVC: 2
NN-H-93: RNCC: 5 | RNVC: 9
NN-H-93 TY1CL4GRB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-049-8023
Reamer Pilot

000498023
RMP937: RNCC: 3 | RNVC: 2
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-049-8020
Reamer Pilot

000498020
RMP718: RNCC: 3 | RNVC: 2
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY4SZE: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-049-8022
Reamer Pilot

000498022
RMP843: RNCC: 3 | RNVC: 2
GGG-R-180 TY4SZG: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-143-8016
Impe Riveting Punch

001438016
801650: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-978-2211
Valve Guide Reamer

009782211
64924-1: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-00-978-2214
Valve Guide Reamer

009782214
64924-3: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-00-239-6887
Hand File

002396887
5110-00-239-6887: RNCC: 3 | RNVC: 2
GGG-F-325 TY14STC: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
A-A-2317: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-243-8757
Jeweler's Saw Blade

002438757
5110-00-243-8757: RNCC: 3 | RNVC: 2
GGG-B-471: RNCC: 4 | RNVC: 1
GGG-B-471 TY2: RNCC: 5 | RNVC: 1
49.401: RNCC: 5 | RNVC: 2
41899M: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-242-0120
Hand File

002420120
A-A-2431: RNCC: 4 | RNVC: 1

1 Jan 1963

5110-00-239-6898
Hand File

002396898
A-A-2318: RNCC: 4 | RNVC: 1
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY16CL1STA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-056-5536
Hand File Set

000565536
5110-00-056-5536: RNCC: 3 | RNVC: 2
37035: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
37035: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL1TO12 NO. 2 CUT: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-221-1230
Pipe Cutter

002211230
GGG-C-771: RNCC: 4 | RNVC: 1
GGG-C-771 TY1CL1STA: RNCC: 5 | RNVC: 1
MS16365-3: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-607-7396
Gasket Cutter Blade

006077396
AX6030: RNCC: 3 | RNVC: 2
FIG3: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-199-0466
Hand Reamer

001990466
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL3: RNCC: 5 | RNVC: 9
1003: RNCC: 5 | RNVC: 9
1100S 3/8 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-220-9533
Dimpling Die

002209533
48C19983-16: RNCC: 3 | RNVC: 2
MIL-D-922: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-124-0193
Dimpling Die

001240193
48757-1: RNCC: 3 | RNVC: 2
48757: RNCC: 5 | RNVC: 9

4 Nov 1968

5110-00-124-0200
Dimpling Die

001240200
48861-1: RNCC: 3 | RNVC: 2
48861: RNCC: 5 | RNVC: 9

4 Nov 1968

5110-00-186-6712
Hand Reamer

001866712
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-693-6344
Hand Cold Chisel

006936344
1286871: RNCC: 3 | RNVC: 2
C-12B: RNCC: 3 | RNVC: 2
01.54.98.75: RNCC: 5 | RNVC: 2
01.54.98.75: RNCC: 5 | RNVC: 9
C-12B: RNCC: 5 | RNVC: 9
A-A-2475: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-6889
Hand File

002396889
PD5110-00-239-6889: RNCC: 3 | RNVC: 2
A-A-2317: RNCC: 5 | RNVC: 9
GGG-F-325 TY14STB: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-233-9721
Hand Rasp

002339721
A-A-2329: RNCC: 4 | RNVC: 1
19136: RNCC: 5 | RNVC: 2
19136: RNCC: 5 | RNVC: 9
GGG-F-325 TY27CL1STA: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-6216
Hand File

002396216
A-A-2320: RNCC: 4 | RNVC: 1
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY17STA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-6227
Hand File

002396227
5110-00-239-6227: RNCC: 3 | RNVC: 2
07657: RNCC: 5 | RNVC: 2
GGG-F-325 TY22: RNCC: 5 | RNVC: 9
07657: RNCC: 5 | RNVC: 9
A-A-2324: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-0705
Jeweler's Saw Blade Set

005960705
GGG-B-471: RNCC: 4 | RNVC: 1
GGG-B-471 TY2: RNCC: 5 | RNVC: 1

1 Jan 1961

5110-00-142-4986
Breast Drill

001424986
GGG-D-651: RNCC: 4 | RNVC: 1
GGG-D-651 TY2STB: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-142-5004
Crosscut Hand Saw

001425004
GGG-S-65: RNCC: 4 | RNVC: 1
GGG-S-65 TY5: RNCC: 5 | RNVC: 1
53: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-595-9498
Knockout Punch And Die

005959498
GGG-P-836: RNCC: 4 | RNVC: 1
5110-00-595-9498: RNCC: 5 | RNVC: 1
GGG-P-836 TY2: RNCC: 5 | RNVC: 1
735 1-3/32: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-596-1048
Hand Boilermaker's Chisel

005961048
NY-400-571-1635: RNCC: 3 | RNVC: 2
DD445-S5101-134-1635: RNCC: 5 | RNVC: 2
F165-858-1518: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-199-0461
Hand Reamer

001990461
B94.2: RNCC: 3 | RNVC: 1
32150: RNCC: 3 | RNVC: 2
31180: RNCC: 5 | RNVC: 9
1006: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL3: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-197-5342
Firmer Chisel

001975342
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY1CL4STA: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-194-6045
Hand Reamer

001946045
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-324-9389
Wire Braid Cutter

003249389
313: RNCC: 3 | RNVC: 9
313: RNCC: 5 | RNVC: 9
313: RNCC: C | RNVC: 1

1 Jan 1963

5110-00-658-8101
Glass Cutting Wheel

006588101
11345: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-203-6722
Hand Reamer

002036722
50031BTYPEA2GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-203-6742
Hand Reamer

002036742
50031BTYPEA2GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-204-1566
Craftsman's Knife

002041566
K-5: RNCC: 3 | RNVC: 2
795505PC15: RNCC: 5 | RNVC: 2
K-5: RNCC: 5 | RNVC: 9

1 Jan 1961

5110-00-138-5328
Wire Wrapping Tool Cutting And Skinning Tool Attachment

001385328
515655: RNCC: 3 | RNVC: 2
515655: RNCC: 5 | RNVC: 9
515655: RNCC: 5 | RNVC: 9

28 Dec 1974

5110-00-221-1188
Ratchet Bit Brace

002211188
GGG-B-671: RNCC: 4 | RNVC: 1
GGG-B-671 TY1CL2STA: RNCC: 5 | RNVC: 1
64005: RNCC: 5 | RNVC: 2
02-743: RNCC: 5 | RNVC: 9
02-743: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-4499
Hand Reamer

005964499
PWA6832: RNCC: 3 | RNVC: 2

1 Jan 1961

5110-00-640-5420
Firmer Chisel

006405420
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 44 TY2: RNCC: 5 | RNVC: 1
305: RNCC: 5 | RNVC: 2
B107.44: RNCC: 5 | RNVC: 9
GGG-C-311: RNCC: 5 | RNVC: 9
GGG-C-311 TY1CL4STA OR C: RNCC: 5 | RNVC: 9
305: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-254-3467
Chisel And Gouge Handle

002543467
NN-H-00106: RNCC: 4 | RNVC: 1
NN-H-00106 TY1SZ3: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-113-4104
Tube Cutter Cutting Wheel

001134104
AE5066069: RNCC: 3 | RNVC: 2

4 Jan 1973

5110-00-241-2582
Jeweler's Saw Blade

002412582
GGG-B-471: RNCC: 4 | RNVC: 1
GGG-B-471 TY2: RNCC: 5 | RNVC: 1
49.412: RNCC: 5 | RNVC: 2
41899C: RNCC: 5 | RNVC: 9
SBX4: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-8491
Hand Reamer

005968491
B94.2: RNCC: 3 | RNVC: 1
764-0900-000: RNCC: 3 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
90RL: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-9370
Bearing Scraper

005969370
1412: RNCC: 3 | RNVC: 2
59040: RNCC: 5 | RNVC: 2
GGG-S-113 TY2: RNCC: 5 | RNVC: 9
GGG-S-113: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-8489
Hand Reamer

005968489
B94.2: RNCC: 3 | RNVC: 1
764-0710-000: RNCC: 3 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
71RL: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-4360
Hand Reamer

005964360
53C20381-8700: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-596-4364
Hand Reamer

005964364
923248: RNCC: 3 | RNVC: 2
AV923248: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-6883
Hand File

002396883
A-A-2317: RNCC: 4 | RNVC: 1
GGG-F-325 TY14STC: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-277-2330
Knockout Punch And Die

002772330
GGG-P-836: RNCC: 4 | RNVC: 1
GGG-P-836 TY1CL2: RNCC: 5 | RNVC: 1
60004: RNCC: 5 | RNVC: 2
5110-00-277-2330: RNCC: 5 | RNVC: 2
731-5/8: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-3032
Hand Reamer

002933032
B94.2: RNCC: 3 | RNVC: 1
134RB: RNCC: 5 | RNVC: 9
761-1340-000: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-3044
Hand Reamer

002933044
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
65RB: RNCC: 5 | RNVC: 9
761-0650-000: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-131-3633
Hand Reamer

001313633
TFIM25.0055-204: RNCC: 3 | RNVC: 2
TLD 7310 R-2-4: RNCC: 5 | RNVC: 2
TLD 7310 R-2-4: RNCC: 5 | RNVC: 9

21 Mar 1975

5110-00-263-0315
Saw Handle

002630315
16: RNCC: 3 | RNVC: 9
GGG-S-64: RNCC: 5 | RNVC: 9
GGG-S-64 TY2: RNCC: 5 | RNVC: 9
119: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-237-8598
Cylinder Ridge Reamer

002378598
MIL-C-82069: RNCC: 4 | RNVC: 1
MIL-C-82069 CL1TY2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-239-6882
Hand File

002396882
5110-00-239-6882: RNCC: 3 | RNVC: 2
73-46650: RNCC: 5 | RNVC: 2
GGG-F-325 TY14STB: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
A-A-2317: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-204-0720
Hand File

002040720
A-A-2323: RNCC: 4 | RNVC: 1
16859: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY20STA: RNCC: 5 | RNVC: 9
16859: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-237-8095
Keyhole Saw

002378095
GGG-S-65: RNCC: 4 | RNVC: 1
GGG-S-65 TY8STB: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-233-3582
Turning Gouge

002333582
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY2CL2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-263-0313
Saw Handle

002630313
NN-H-00106: RNCC: 4 | RNVC: 1
NN-H-00106 TY3: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-255-6087
Turning Gouge

002556087
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY2CL2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-254-3468
Chisel And Gouge Handle

002543468
5110-00-254-3468: RNCC: 3 | RNVC: 2
NN-H-00106: RNCC: 5 | RNVC: 9
NN-H-00106 TY1SZ2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-3434
Back Saw

002933434
1171620: RNCC: 3 | RNVC: 9
GGG-S-65: RNCC: 4 | RNVC: 1
GGG-S-65 TY1: RNCC: 5 | RNVC: 1
MS16328-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-248-2639
Hand File

002482639
A-A-2313: RNCC: 4 | RNVC: 1
73-29850 SIMONDS: RNCC: 5 | RNVC: 2
73-29850: RNCC: 5 | RNVC: 2
05919: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
05919: RNCC: 5 | RNVC: 9
GGG-F-325 TY10CL2STC: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-262-7415
Riffler

1 Jan 1963

5110-00-239-7759
Hand File

002397759
41582: RNCC: 3 | RNVC: 2
41582: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
A-A-2441: RNCC: 5 | RNVC: 9
GGG-F-331 TY17: RNCC: 5 | RNVC: 9
91117: RNCC: C | RNVC: 1

1 Jan 1963

5110-00-245-4168
Hand File

002454168
A-A-2442: RNCC: 4 | RNVC: 1
37053: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL1: RNCC: 5 | RNVC: 9
37053: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-268-1310
Hand Reamer

002681310
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY6GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-156-0114
Hand File

001560114
A-A-2434: RNCC: 4 | RNVC: 1
GGG-F-331: RNCC: 5 | RNVC: 9
GGG-F-331 TY11CL3: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-241-9164
Hand File

002419164
A-A-2322: RNCC: 4 | RNVC: 1
A-A-2322 TY1: RNCC: 5 | RNVC: 1
16147: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
16147: RNCC: 5 | RNVC: 9
GGG-F-325 TY19STA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-238-9669
Hand File

002389669
GGG-F-325: RNCC: 4 | RNVC: 1
GGG-F-325 TY17STC: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-228-3191
Hand Hacksaw Blade

002283191
GGG-B-451: RNCC: 4 | RNVC: 1
GGG-B-451 TY2GRBCL2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-228-3192
Hand Hacksaw Blade

002283192
GGG-B-451: RNCC: 4 | RNVC: 1
GGG-B-451 TY1GRBCL2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-240-6034
Chisel Bar

002406034
B107.410: RNCC: 3 | RNVC: 1
5110-00-240-6034: RNCC: 3 | RNVC: 2
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1
G10-6034: RNCC: 5 | RNVC: 2
696: RNCC: 5 | RNVC: 2
A-A-2562: RNCC: 5 | RNVC: 9
GGG-B-101 TY1: RNCC: 5 | RNVC: 9
GGG-B-101: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-277-2690
Ship Scraper

002772690
S-10G: RNCC: 3 | RNVC: 2
MIL-S-21263: RNCC: 5 | RNVC: 9
S-10: RNCC: 5 | RNVC: 9
A-A-2481: RNCC: 5 | RNVC: 9
S-10: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-179-5661
Valve G Step Reamer

001795661
ST113-2: RNCC: 3 | RNVC: 2

20 Dec 1968

5110-00-271-9943
Hand Half Round Nose Chisel

002719943
GGG-C-313: RNCC: 4 | RNVC: 1
GGG-C-313 TY6CL1STA: RNCC: 5 | RNVC: 1
G10-9943: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-224-8840
Valve Stem Guide Cleaner

002248840
37560: RNCC: 3 | RNVC: 2
21445: RNCC: 5 | RNVC: 9
21445: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-224-8968
Dimpling Punch

002248968
36D1328-5: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-224-9245
Glass Cutter

002249245
A-A-3024: RNCC: 4 | RNVC: 1
GGG-C-751: RNCC: 5 | RNVC: 9
GGG-C-751 TY2CL2MLA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-224-9306
End Cutting Nippers

002249306
GGG-N-350: RNCC: 4 | RNVC: 1
GGG-N-350 TY1CL1STA: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-224-8838
Valve Stem Guide Cleaner

002248838
5110-00-224-8838: RNCC: 3 | RNVC: 2
37557: RNCC: 5 | RNVC: 2
N250: RNCC: 5 | RNVC: 2
21436: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-224-8971
Dimpling Punch

002248971
33D902-5: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-224-9929
Ship Scraper

002249929
PD 5110-00-224-9929: RNCC: 3 | RNVC: 2
GGG-S-116 TY5: RNCC: 5 | RNVC: 9
GGG-S-116: RNCC: 5 | RNVC: 9
S-27: RNCC: 5 | RNVC: 9
S-27: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-223-1100
Hand Diamond Point Chisel

002231100
GGG-C-313: RNCC: 4 | RNVC: 1
GGG-C-313 TY2STA: RNCC: 5 | RNVC: 1
10603: RNCC: 5 | RNVC: 2
22904: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-003-0536
Tube Deburring Tool Stem

000030536
D9850-13-10: RNCC: 3 | RNVC: 2

17 May 1972

5110-00-003-0535
Tube Deburring Tool Stem

000030535
D9850-13-08: RNCC: 3 | RNVC: 2

17 May 1972

5110-00-180-0942
Single Bow Cutting Punch

001800942
GGG-P-833: RNCC: 4 | RNVC: 1
GGG-P-833 TY1CLBST2SZ11: RNCC: 5 | RNVC: 1
51424: RNCC: 5 | RNVC: 2
147 SIZE 7: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-199-0467
Hand Reamer

001990467
B94.2: RNCC: 3 | RNVC: 1
1004: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL3: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
31110: RNCC: 5 | RNVC: 9
31110: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-040-2454
Hand Double Clinch Punch

000402454
89-171: RNCC: 3 | RNVC: 2
1155-25: RNCC: 5 | RNVC: 2
171: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-833-4380
Core Sli Cutter Kit

008334380
12A0173-1: RNCC: 3 | RNVC: 2
12A0173-1: RNCC: 5 | RNVC: 9

8 Sep 1967

5110-00-186-8170
Paring Chisel

001868170
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 44 TY2: RNCC: 5 | RNVC: 1
046303: RNCC: 5 | RNVC: 2
32-6: RNCC: 5 | RNVC: 2
828-C3206: RNCC: 5 | RNVC: 2
GGG-C-311 TY1CL8STA: RNCC: 5 | RNVC: 9
GGG-C-311: RNCC: 5 | RNVC: 9
32-6: RNCC: 5 | RNVC: 9
B107.44 TY2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-8181
Turning Chisel

001868181
476: RNCC: 3 | RNVC: 1
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY1CL9STC: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-98-201-9914
Double Bow Cutting Punch

982019914
NO PRIMARY REF 98-201-9914: RNCC: 3 | RNVC: 2
956-0288: RNCC: 3 | RNVC: 2
NO 41: RNCC: 5 | RNVC: 2

16 Mar 1988

5110-00-149-1426
Riffler

001491426
5110-00-149-1426: RNCC: 3 | RNVC: 2
36090: RNCC: 5 | RNVC: 2
A-A-2463: RNCC: 5 | RNVC: 9
GGG-F-331 TY20CL9: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
MS15676-2: RNCC: 5 | RNVC: 9
36090: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-215-2563
Cable Trimmer

002152563
103-301: RNCC: 3 | RNVC: 2
ESA660248: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-4175
Hand Reamer

001864175
R3234: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-66-150-2137
Hand Hacksaw Blade

661502137
NO PRIMARY REF 66-150-2137: RNCC: 3 | RNVC: 2
06900900: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-21-866-8370
Craftsman's Knife

218668370
57-5010: RNCC: 3 | RNVC: 2

16 Jun 1972

5110-98-104-7433
Paring Chisel

981047433
NO PRIMARY REF 98-104-7433: RNCC: 3 | RNVC: 2
5110-99-910-4245: RNCC: 6 | RNVC: 9
1A910-4245: RNCC: 6 | RNVC: 9

11 Dec 1973

5110-99-120-5052
Coping Saw Blade

991205052
UKD1S2108: RNCC: 4 | RNVC: 1
51-11PT10: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-175-9041
Lama Per Raschiare

151759041
4894-160: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-99-910-4844
Hand File

999104844
C00RDPATH774: RNCC: 2 | RNVC: 2
DEF1098: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-149-7481
Hand File

661497481
NO PRIMARY REF 66-149-7481: RNCC: 3 | RNVC: 2
07079403: RNCC: 5 | RNVC: 2

10 Apr 2003

5110-00-177-7317
Diagonal Cutting Pliers

001777317
511150-3: RNCC: 3 | RNVC: 2
GGG-P-468 TY1CL1: RNCC: 5 | RNVC: 9
GGG-P-468: RNCC: 5 | RNVC: 9
GGG-P-00468: RNCC: 5 | RNVC: 9

10 Mar 1971

5110-00-293-3049
Hand Reamer

002933049
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
56RB: RNCC: 5 | RNVC: 9
761-0560-000: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-142-5393
Hand Belt Cutter

001425393
C62520: RNCC: 3 | RNVC: 2

23 Apr 1969

5110-00-247-1557
Bearing Scraper

002471557
GGG-S-113: RNCC: 4 | RNVC: 1
MIL-S-1257: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-99-910-5806
Tenon Saw

999105806
BS3159: RNCC: 3 | RNVC: 1
H2215: RNCC: 3 | RNVC: 2
1C2151: RNCC: 6 | RNVC: 9
DEFSTAN51-11PT24: RNCC: 6 | RNVC: 9
F1FA16619: RNCC: 6 | RNVC: 9
H2215: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-054-1394
Bucksaw Blade

150541394
5434-400-10: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-99-910-4923
Hand File

999104923
DEF1098: RNCC: 4 | RNVC: 1
H20135: RNCC: 5 | RNVC: 2
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
FA13511: RNCC: 6 | RNVC: 9
9104923: RNCC: 6 | RNVC: 9
1A921: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-123-2295
Forbici Da Elettric

151232295
208101: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-27-014-2086
Hand File

270142086
YASSI 150MM: RNCC: 2 | RNVC: 1

25 Sep 2002

5110-14-408-9940
Valve Stem Guide Cleaner

144089940
DLP707404: RNCC: 3 | RNVC: 2
DLT587499: RNCC: 5 | RNVC: 2

9 Apr 1986

5110-27-050-1181
Pliers

270501181
3020 12 5200: RNCC: 2 | RNVC: 1
3020 12 5200: RNCC: 5 | RNVC: 9

24 Jun 2010

5110-98-206-0970
Hand File

982060970
DFAMPD04109 THREE SQUARE: RNCC: 2 | RNVC: 2

19 Aug 2004

5110-27-011-5036
Hand File

270115036
10121ME0077: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-14-561-9787
Diagonal Cutting Pliers

145619787
192.18TE: RNCC: 3 | RNVC: 2
641326: RNCC: 5 | RNVC: 2
3148516413260: RNCC: 5 | RNVC: 2

22 Sep 2009

5110-14-488-5529
Hand Metal Cutting Shears

144885529
883A: RNCC: 3 | RNVC: 2
0210241: RNCC: 5 | RNVC: 2
3148512102410: RNCC: 5 | RNVC: 2
0714 03 08: RNCC: 5 | RNVC: 2

21 May 1997

5110-15-119-6473
Electricians' Scissors

151196473
182: RNCC: 3 | RNVC: 2
60151546: RNCC: 5 | RNVC: 2

10 Oct 1994

5110-15-062-7374
Electricians' Scissors

150627374
59R: RNCC: 3 | RNVC: 2

29 Nov 1980

5110-14-208-5562
Thread Restorer File

142085562
1920SAE: RNCC: 3 | RNVC: 2
1920SAE: RNCC: 3 | RNVC: 9
MUL1920SAE: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-14-490-8838
Alesoir

144908838
4067 010 000 306: RNCC: 3 | RNVC: 2
F300 0T 000 5110: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-17-120-1596
Plumber's Saw Blade

171201596
V770A2: RNCC: 3 | RNVC: 2

21 Feb 2007

5110-00-234-1949
Hand Cold Chisel

002341949
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1
113: RNCC: 5 | RNVC: 2
11115: RNCC: 5 | RNVC: 2
GGG-C-313 TY4CL2: RNCC: 5 | RNVC: 9
GGG-C-313: RNCC: 5 | RNVC: 9
B107.48: RNCC: 5 | RNVC: 9
B107.48 TY1CL2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-15-149-7959
Single Bow Cutting Punch

151497959
003003: RNCC: 3 | RNVC: 2

18 Jun 1999

5110-27-011-6656
Hand File

270116656
09013KE1087: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-172-7181
56 Spingipezzuola 5

151727181
SPINGIPEZZUOLA 5,56MM.KLEEN BORE: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-14-469-0379
End Cutting Nippers

144690379
268: RNCC: 3 | RNVC: 2
3272670348035: RNCC: 5 | RNVC: 2

5 Apr 1994

5110-15-193-5522
Diagonal Cutting Pliers

151935522
85BCF: RNCC: 3 | RNVC: 2
(241)A005285BCF: RNCC: 5 | RNVC: 2

8 Jun 2010

5110-99-803-0919
Oil Filter C Cutter

5110-14-436-4268
Double Bow Cutting Punch

144364268
376-62: RNCC: 3 | RNVC: 2

3 Jan 1990

5110-12-122-2497

5110-00-084-0951
Carbon Remover Set

000840951
J-9418: RNCC: 3 | RNVC: 2
2CD116: RNCC: 5 | RNVC: 2
J9418: RNCC: 5 | RNVC: 9
2CD116: RNCC: 5 | RNVC: 9
10514281: RNCC: 7 | RNVC: 2

15 Dec 1967

5110-00-243-6917
Corner Bit Brace

002436917
GGG-B-671: RNCC: 4 | RNVC: 1
GGG-B-671 TY2: RNCC: 5 | RNVC: 1
502: RNCC: 5 | RNVC: 2
993: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-7626
Hand File

002397626
5110-00-239-7626: RNCC: 3 | RNVC: 2
39911: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
A-A-2434: RNCC: 5 | RNVC: 9
GGG-F-331 TY11CL3: RNCC: 5 | RNVC: 9
39911: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-66-061-0879
Hand Reamer

660610879
AS B43 PT2: RNCC: 3 | RNVC: 1
9311 963 02 6435: RNCC: 3 | RNVC: 2

24 Oct 1976

5110-14-244-3661

5110-00-004-3991
Knockout Punch And Die

000043991
730-1 1-2: RNCC: 3 | RNVC: 2

7 Jun 1972

5110-99-883-3224
Piston Rod Spanner

998833224
MC1276110: RNCC: 3 | RNVC: 2

16 May 2002

5110-15-165-4221
Lima Per Meccanica

151654221
2560410: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-122-2562
Hand Reamer

121222562
FRO513B-1: RNCC: 3 | RNVC: 2
1SPIRALGENUTET: RNCC: 5 | RNVC: 2

30 May 1969

5110-21-639-6535
Corner Bit Brace

216396535
993: RNCC: 3 | RNVC: 1
502: RNCC: 3 | RNVC: 1
993: RNCC: 3 | RNVC: 1
993: RNCC: 3 | RNVC: 2
1F10850: RNCC: 5 | RNVC: 9

24 Feb 1969

5110-00-244-9088
Turning Chisel

002449088
19-1: RNCC: 3 | RNVC: 2
GGG-C-311: RNCC: 5 | RNVC: 9
GGG-C-311 TY1CL9STD: RNCC: 5 | RNVC: 9
19-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-095-3411
Hand Reamer

000953411
13824-T3: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-025-2289
Hand Adjusta Reamer

000252289
187RB: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-025-2325
Hand Reamer

000252325
84RB: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-99-117-2358

5110-21-637-7575

5110-21-801-0765

5110-00-289-0531
Hand Commutator Slotting Tool

002890531
20-009: RNCC: 3 | RNVC: 2
A-A-52130: RNCC: 4 | RNVC: 1
MIL-S-17709: RNCC: 5 | RNVC: 9
MIL-S-17709 TYD: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-21-868-0873
Hand Metal Stamping Die Set

218680873
CGA238: RNCC: 3 | RNVC: 2

18 Aug 1972

5110-98-205-4762
Hand Reamer

982054762
DFAMPD00207 L: RNCC: 2 | RNVC: 2

12 Oct 2000

5110-00-055-6855
Cable Cutter Assy

000556855
781595-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-27-040-1811
Torna Kalemi

270401811
20X12X125: RNCC: 2 | RNVC: 1

10 Jan 2008

5110-14-451-4078
Double Bow Cutting Punch

144514078
245.J2DIAM6: RNCC: 3 | RNVC: 2

19 Nov 1991

5110-00-023-4694
Carton Opener

000234694
5110-00-023-4694: RNCC: 3 | RNVC: 2
500: RNCC: 5 | RNVC: 9

27 Apr 1967

5110-15-144-5145
Tagliabulloni Da Mm

151445145
195205: RNCC: 3 | RNVC: 2
195DI900: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-00-095-3294
Hand Reamer

000953294
TAM3574-21: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-239-7739
Hand File

002397739
5110-00-239-7739: RNCC: 3 | RNVC: 2
40651: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
A-A-2437: RNCC: 5 | RNVC: 9
GGG-F-331 TY13CL2: RNCC: 5 | RNVC: 9
40651: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-156-0056
Hand File

001560056
A-A-2313: RNCC: 4 | RNVC: 1
06117: RNCC: 5 | RNVC: 2
GGG-F-325 TY10CL2STB: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
06117: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-156-0215
Hand File

001560215
DWG5110-00-156-0215: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-156-0197
Hand File

001560197
A-A-2438: RNCC: 4 | RNVC: 1
41150: RNCC: 5 | RNVC: 2
GGG-F-331 TY14: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
41150: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-27-019-8373
Hand Cape Chisel

270198373
10091KISK0012: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-25-123-6475
Komplet Gravoerpenn

251236475
RRC1: RNCC: 3 | RNVC: 2
RRC1: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-14-442-9534
Hand Metal Stamping Die Set

144429534
101025100: RNCC: 3 | RNVC: 2
91705417: RNCC: 5 | RNVC: 2

7 Nov 1990

5110-15-197-2560
Screw Thread Insert Breaker

151972560
PN UAS 00032349: RNCC: 3 | RNVC: 2
5110F76029008: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-208-8125
Tronchese

152088125
3TASFZCNFRN250: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-364-8987
Wire Stripper Blade

123648987
9005400000: RNCC: 3 | RNVC: 2

12 Nov 2004

5110-25-102-3845
Hand File

5110-22-301-3129

5110-25-102-3826

5110-00-245-4166
Hand File

002454166
5110-00-245-4166: RNCC: 3 | RNVC: 2
38101: RNCC: 5 | RNVC: 2
A-A-2453: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL12: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
38101: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-245-3015
Hand File

002453015
5110-00-245-3015: RNCC: 3 | RNVC: 2
20205: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
20205: RNCC: 5 | RNVC: 9
GGG-F-325 TY23STB: RNCC: 5 | RNVC: 9
A-A-2325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-22-609-6054
Hand File

9 Feb 2005

5110-25-124-5440
Crosscut Hand Saw

251245440
155: RNCC: 3 | RNVC: 2
5110-25-101-8738: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-21-893-1045
Pocket Knife

218931045
0592: RNCC: 3 | RNVC: 2

14 May 1983

5110-15-165-3954
Lima Mezzotonda Con

151653954
2342G812D: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-121-7521
Spe Piede Di Porco

151217521
742121: RNCC: 3 | RNVC: 2
(241)A3488742121: RNCC: 5 | RNVC: 2

14 Feb 1996

5110-15-208-4582
Alesatore

152084582
3AANFCFMEQ18: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-00-233-7677
Tail Pipe Cutter

002337677
2031: RNCC: 3 | RNVC: 2
2031: RNCC: 5 | RNVC: 9

3 Mar 1971

5110-00-293-3024
Hand Reamer

002933024
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
103RL: RNCC: 5 | RNVC: 9
764-1030-000: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-294-9503
Single Bit Ax Handle

002949503
NNH93TYPE1CLASS6GRADEA: RNCC: 4 | RNVC: 1

1 Jan 1963

5110-99-910-9996
Hand Reamer

999109996
BS122PT2: RNCC: 4 | RNVC: 1
3/16"PARALLEL HAND REAMER: RNCC: 6 | RNVC: 9
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-22-610-1543
Circle Cutter

226101543
4.328.903.903: RNCC: 3 | RNVC: 2

13 Apr 2005

5110-27-045-1039
Hand Cape Chisel

270451039
L50-14: RNCC: 2 | RNVC: 1

7 Apr 2009

5110-00-293-3051
Hand Reamer

002933051
B94.2: RNCC: 3 | RNVC: 1
62RL: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
764-0620-000: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-180-0955
Tinner's Hollow Cutting Punch

001800955
GGG-P-833: RNCC: 4 | RNVC: 1
GGG-P-833 TY1CLCST1SZ5: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-180-0944
Single Bow Cutting Punch

001800944
GGG-P-833: RNCC: 4 | RNVC: 1
GGG-P-833 TY1CLBST2SZ15: RNCC: 5 | RNVC: 1
51428: RNCC: 5 | RNVC: 2
147 SIZE 9: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-107-0036
Cutting And Skinning Tool Blade Assembly

001070036
503919: RNCC: 3 | RNVC: 2
652778: RNCC: 5 | RNVC: 2
503919: RNCC: 5 | RNVC: 9
652778: RNCC: 5 | RNVC: 9
503919: RNCC: 5 | RNVC: 9

22 Jul 1968

5110-21-109-0984
Cutter

211090984
MARK3: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-21-905-9600
Tie Wrap Pliers

219059600
W5738127: RNCC: 3 | RNVC: 2

2 Mar 1989

5110-15-219-4623
Serie Estrattori Pe

152194623
0011430S5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-763-4724
Bolt Cropper

5110-99-607-2819

5110-00-003-1538
Exposed Blade Tube Deburring Tool

000031538
D9850-03: RNCC: 3 | RNVC: 2
D9850-3: RNCC: 5 | RNVC: 9

24 May 1972

5110-00-180-0945
Single Bow Cutting Punch

001800945
GGG-P-833: RNCC: 4 | RNVC: 1
GGG-P-833 TY1CLBST2SZ16: RNCC: 5 | RNVC: 1
147 SIZE 10: RNCC: 5 | RNVC: 2
51430: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-15-186-3891
Coltelli Di Ricambi

151863891
330R/A2: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-123-6704
Lima Taglio Mezzodo

151236704
990-F: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-00-186-8167
Paring Chisel

001868167
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 44 TY2: RNCC: 5 | RNVC: 1
32-3: RNCC: 5 | RNVC: 2
828-C3203: RNCC: 5 | RNVC: 2
046300: RNCC: 5 | RNVC: 2
GGG-C-311 TY1CL8STA: RNCC: 5 | RNVC: 9
GGG-C-311: RNCC: 5 | RNVC: 9
B107.44 TY2: RNCC: 5 | RNVC: 9
32-3: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-132-1863
Hand Wire Stripper

001321863
45-186: RNCC: 3 | RNVC: 2

15 Feb 1975

5110-27-008-5759
Hand File

270085759
30.0301012: RNCC: 2 | RNVC: 1

20 Jun 2002

5110-15-158-4668
Hand Metal Stamping Die Set

151584668
366: RNCC: 3 | RNVC: 2
(241)A1572366: RNCC: 5 | RNVC: 2
DA366: RNCC: 5 | RNVC: 2

19 Feb 2004

5110-21-112-1491

5110-99-924-2674
Hollo Cutting Punch

5110-98-855-4409

5110-98-851-7362

5110-21-865-0244

5110-00-131-4026
Hand Reamer

001314026
T.F.I.M. 25.0055-407: RNCC: 3 | RNVC: 2
TLD 7310 R-4-7: RNCC: 5 | RNVC: 2
TLD 7310 R-4-7: RNCC: 5 | RNVC: 9

21 Mar 1975

5110-00-131-4333
Hand Reamer

001314333
B94.2: RNCC: 3 | RNVC: 1
TFIM25.0057-402: RNCC: 3 | RNVC: 9
TLD 7311 R-4-3: RNCC: 5 | RNVC: 2
TLD 7311 R-4-3: RNCC: 5 | RNVC: 9

21 Mar 1975

5110-00-131-4248
Hand Reamer

001314248
TFIM25.0057-204: RNCC: 3 | RNVC: 2
TLD 7311 R-2-4: RNCC: 5 | RNVC: 2
TLD 7311 R-2-4: RNCC: 5 | RNVC: 9

21 Mar 1975

5110-33-158-4990
Firmer Chisel

331584990
1350.00060: RNCC: 3 | RNVC: 2
119.110: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-14-421-2066
Embroidery Scissors

144212066
841-1: RNCC: 3 | RNVC: 2
3148512069430: RNCC: 5 | RNVC: 2

6 Jan 1988

5110-14-419-9549
Single Bow Cutting Punch

144199549
620-864-901-0: RNCC: 3 | RNVC: 2

10 Nov 1987

5110-66-024-6611
Hand Hacksaw Blade

660246611
FLEXIBLE10IN: RNCC: 3 | RNVC: 1
15-804: RNCC: 3 | RNVC: 2
HSF2410: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-33-204-7166
Diagonal Cutting Pliers

332047166
8210.00150: RNCC: 3 | RNVC: 2
623.011: RNCC: 3 | RNVC: 2
15.260: RNCC: 3 | RNVC: 2

15 Dec 2005

5110-00-268-3882
Craftsman's Knife

002683882
5110-00-268-3882: RNCC: 3 | RNVC: 2
GGG-K-481: RNCC: 4 | RNVC: 1
GGG-K-481 TY2CL1ST3: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-268-2897
Hand File

002682897
5110-00-268-2897: RNCC: 3 | RNVC: 2
38017: RNCC: 5 | RNVC: 2
A-A-2449: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL8: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
38017: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-245-4155
Hand File

002454155
9761: RNCC: 3 | RNVC: 2
212722PC265: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
A-A-2432: RNCC: 5 | RNVC: 9
GGG-F-331 TY11CL1: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-294-4429
Hand Reamer

002944429
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL2GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-224-7531
Miter Box And Saw

002247531
19-060: RNCC: 3 | RNVC: 2
19-060: RNCC: 3 | RNVC: 9
244: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-15-165-4007
Pialletto In Metall

151654007
5000G: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-21-109-0482
Craftsman's Knife

211090482
20820: RNCC: 3 | RNVC: 2
1515-1: RNCC: 3 | RNVC: 2
KCL: RNCC: 5 | RNVC: 2
YACAN13468: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-15-185-2629
Roncola Battifratta

151852629
RONCBATTIFMANIC: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-303-5366
Brick Chisel

123035366
5222.01: RNCC: 3 | RNVC: 2
12125-5: RNCC: 5 | RNVC: 2
51884-0-0: RNCC: 5 | RNVC: 2

2 Apr 1985

5110-00-293-3030
Hand Reamer

002933030
GGG-R-180: RNCC: 4 | RNVC: 1
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-188-0755
Hand Reamer

001880755
102CS 1 5/8 IN.: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-188-0757
Hand Reamer

001880757
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRB: RNCC: 5 | RNVC: 9
102CS 1-11/16 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-172-1726
Hand Wire Stripper

001721726
SW1: RNCC: 3 | RNVC: 9

27 Aug 1972

5110-15-136-3941
Lama Intercambiabil

151363941
140082: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-216-9575
Pialletto Mm.40

152169575
0624: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-807-1208
Bolt Cutter Jaws

218071208
10AND11: RNCC: 3 | RNVC: 1
390NEJAWS: RNCC: 5 | RNVC: 2

16 Aug 1967

5110-27-000-7995
Hand Cape Chisel

270007995
5010 03 0022: RNCC: 3 | RNVC: 2

7 Jun 1991

5110-12-369-1486
Straight Trimmers Shears

123691486
365 117-1: RNCC: 3 | RNVC: 2

30 May 2006

5110-15-165-3778
Tronchese

151653778
7131160: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-305-6443
Hand Reamer

123056443
16100-5X15: RNCC: 3 | RNVC: 9

28 Nov 1985

5110-15-192-2378
Raschietto Wiha

151922378
43020: RNCC: 3 | RNVC: 2

2 Mar 2010

5110-15-210-4738
Tenaglia Pipo Burdy

152104738
EX5110RI2710560: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-218-1513
Scalpello Largo Kan

152181513
12303050: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-13-120-8953
Scraper Blade

131208953
S85: RNCC: 3 | RNVC: 2
27054750000107: RNCC: 5 | RNVC: 2
75027054: RNCC: 5 | RNVC: 2

9 Jul 2010

5110-12-170-9626
Hand Cold Chisel

121709626
51268030: RNCC: 3 | RNVC: 9

24 Aug 1977

5110-21-639-4374
Hand File

216394374
39GP30: RNCC: 4 | RNVC: 1

4 Jun 1968

5110-21-109-8580

5110-21-111-9994

5110-17-122-0644
Exposed Blade Tube Deburring Tool

171220644
7121709: RNCC: 3 | RNVC: 2

3 Apr 2009

5110-15-208-4657
Fustella Per Guarni

152084657
3FANGRF023: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-607-7116
Pocket Scissors

226077116
14051100: RNCC: 3 | RNVC: 2

28 Jul 2004

5110-21-883-1764
Riffler

218831764
STYLE6: RNCC: 3 | RNVC: 1
941048: RNCC: 5 | RNVC: 2

27 Jan 1981

5110-66-010-7954
Adjustable Nut Set

660107954
MICR0SETNUTSETA4: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-14-244-3682

5110-14-244-0820

5110-14-238-5456

5110-00-223-4990
Hand Drill

002234990
GGG-D-671: RNCC: 4 | RNVC: 1
GGG-D-671 TY3: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-104-4154
Hand Wire Stripper

001044154
GGG-S-665: RNCC: 4 | RNVC: 1
GGG-S-665 TY2CL2STB: RNCC: 5 | RNVC: 1
C 5734 233 V: RNCC: 5 | RNVC: 2
45-1513: RNCC: 5 | RNVC: 2

1 Sep 1972

5110-00-049-8018
Reamer Pilot

000498018
B94.2: RNCC: 3 | RNVC: 1
RMP593: RNCC: 3 | RNVC: 2
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY4SZC: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-12-195-6325
Reamer Blade Set

121956325
KNIVE-WN50F11: RNCC: 3 | RNVC: 2

21 Mar 1983

5110-15-165-3818
Lima Per Meccanica

151653818
256514: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-340-8867
Hand Cold Chisel

123408867
7140005: RNCC: 3 | RNVC: 2

28 Jun 1996

5110-33-206-5836
Metal Cutting Hand Saw

332065836
801.10: RNCC: 3 | RNVC: 2

12 Mar 2008

5110-15-165-4109
Coltello Multiuso

151654109
221001: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-218-1142
Tagliabulloni Hit 4

152181142
HIT450: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-216-4648
Fustella A Cavallot

152164648
3FANCNFO50: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-172-6007
Sega A Ferro

151726007
SEGA A FERRO: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-14-237-7639

5110-00-124-0201
Dimpling Die

001240201
69066: RNCC: 3 | RNVC: 2

4 Nov 1968

5110-21-876-0490
Hand Reamer

218760490
BTR100: RNCC: 3 | RNVC: 2
5110-8543: RNCC: 6 | RNVC: 9

2 Aug 1977

5110-12-368-9822
Double Bow Cutting Punch

123689822
0100640: RNCC: 3 | RNVC: 2
00.09.49.76: RNCC: 5 | RNVC: 2

10 May 2006

5110-17-106-5781
Asbestos Cement Pipe And Conduit Taper Joint Cutter

171065781
78-OR/PEDAL: RNCC: 3 | RNVC: 2

29 Jul 1992

5110-12-129-1364
Hand Reamer

121291364
10: RNCC: 3 | RNVC: 2

30 May 1969

5110-25-112-6309
Snor

251126309
F0RPIGGTRAADSAKS: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-17-700-9862
Firmer Gouge

177009862
1512.26: RNCC: 3 | RNVC: 2

15 May 1970

5110-12-343-7801
Riffler

123437801
1801 152: RNCC: 3 | RNVC: 2

25 Jul 1997

5110-00-065-8162
Broach

000658162
807829: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-15-210-0949
Lima Tonda Taglio 1

152100949
2602/2-4': RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-326-2960
Hand Reamer

123262960
172.08.030: RNCC: 3 | RNVC: 2
000589215300: RNCC: 3 | RNVC: 2

27 Aug 1991

5110-98-104-7591
Hand File

981047591
100MM REGULAR: RNCC: 3 | RNVC: 2
FD18L STUBS: RNCC: 3 | RNVC: 2
100MM REGULAR: RNCC: 5 | RNVC: 9
FD18L STUBS: RNCC: 5 | RNVC: 9

13 Dec 1973

5110-15-126-1465
Tenaglia Da Forgia

151261465
3513-500: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-341-9431
Hand File

123419431
12025: RNCC: 3 | RNVC: 2
7212000: RNCC: 5 | RNVC: 2

19 Nov 1996

5110-21-855-3217
Turning Chisel

218553217
476: RNCC: 3 | RNVC: 1
311513: RNCC: 6 | RNVC: 9

16 Oct 1969

5110-14-244-0768

5110-14-336-5409

5110-22-621-1884
Tube Cutter

226211884
5611854: RNCC: 3 | RNVC: 2
4028000766: RNCC: 5 | RNVC: 2

19 Aug 2010

5110-15-136-3852
Tenaglie

151363852
197-200: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-00-237-8645
Hand Wire Stripper

002378645
45-021: RNCC: 3 | RNVC: 1
H25906: RNCC: 5 | RNVC: 9

1 Jan 1960

5110-14-244-0901

5110-00-220-9548
Dimpling Punch

002209548
48C19983-7: RNCC: 3 | RNVC: 2
MIL-D-922: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-25-112-4795

5110-00-142-4254
Hand Reamer

001424254
PWA1272: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-181-6632
Fl Cutter And Guide

001816632
965711: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-21-896-7378
Diagonal Cutting Pliers

218967378
205G: RNCC: 3 | RNVC: 2

9 Dec 1984

5110-21-878-2536
Valve Seat Cutter

218782536
T31661S1B: RNCC: 3 | RNVC: 2

20 Jun 1978

5110-15-216-4756
Raspino Tondo Da Cm

152164756
3RFLTOCNN100: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-160-9078
Spazzola Acc.

151609078
F720176671: RNCC: 2 | RNVC: 2

6 Oct 2000

5110-14-244-0778

5110-00-221-0235
Metal Cutting Hand Saw

002210235
240: RNCC: 3 | RNVC: 9
GGG-S-65: RNCC: 5 | RNVC: 9
MS16332-1: RNCC: 5 | RNVC: 9
GGG-S-65 TY9: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-220-9558
Dimpling Punch

002209558
48C19983-9: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-194-6043
Hand Reamer

001946043
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
103HS 53/64 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-66-079-0322
Firmer Chisel

660790322
86 10 MM: RNCC: 3 | RNVC: 2
M601 10 MM: RNCC: 3 | RNVC: 2
5-16-253: RNCC: 3 | RNVC: 2
0381 4206: RNCC: 5 | RNVC: 2

7 Oct 1974

5110-21-901-6834
Paper Cutter

219016834
SU1980: RNCC: 3 | RNVC: 2

16 Jan 1987

5110-66-013-7570
Hand Reamer

660137570
HAND REAMER: RNCC: 3 | RNVC: 1
650 4584: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-66-113-5236
Hand Half Round Nose Chisel

661135236
DMS 206: RNCC: 4 | RNVC: 1

20 Feb 1982

5110-14-506-2475
Hand Metal Cutting Shears

145062475
985.RI: RNCC: 3 | RNVC: 2
3148512170907: RNCC: 5 | RNVC: 2
0714 03 11: RNCC: 5 | RNVC: 2

15 Apr 1998

5110-66-013-7584
Hand Reamer

660137584
HAND REAMER: RNCC: 3 | RNVC: 1
650 4726: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-15-230-4535
Serie Punzoni Numer

152304535
K3680/1: RNCC: 3 | RNVC: 2
511015E156900: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-123-6490
Raschietto Sbavator

151236490
771/1: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-066-3073
Electricians' Scissors

150663073
2619 536 05002: RNCC: 3 | RNVC: 2

17 Sep 1985

5110-00-203-7219
Die Assembly Ram

002037219
ZT185302-5-32: RNCC: 3 | RNVC: 2
ZT385302-5-32: RNCC: 5 | RNVC: 9

1 Jan 1960

5110-00-203-6740
Hand Reamer

002036740
50031BTYPEA2GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-194-5973
Hand Reamer

001945973
B94.2: RNCC: 3 | RNVC: 1
103HS 1-1/32 IN.: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-194-6047
Hand Reamer

001946047
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
103HS 57/64 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-12-303-4258
Hand Valve Seat Rotary Tool

123034258
83020-O/K: RNCC: 3 | RNVC: 9

21 Mar 1985

5110-15-190-3179
Sgorbia

151903179
4QMZM9: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-33-203-0153
Saw Handle

332030153
6615: RNCC: 3 | RNVC: 2

9 Jan 2004

Load More Results