What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 48 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 48of 112

5110-00-497-5437
Hand Cold Chisel

004975437
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1
STP 86A1/4: RNCC: 5 | RNVC: 2
J86A1/4S2: RNCC: 5 | RNVC: 2
6DJU2: RNCC: 5 | RNVC: 2
3R140: RNCC: 5 | RNVC: 9
B107.48: RNCC: 5 | RNVC: 9
86A-1/4: RNCC: 5 | RNVC: 9
B107.48 TY1CL2: RNCC: 5 | RNVC: 9

2 Oct 1970

5110-01-456-7796
Knife Blade

014567796
YA405-1: RNCC: 3 | RNVC: 2

25 Jun 1998

5110-01-514-7782
Hunting Knife Sharpener

015147782
REPROPS201: RNCC: 3 | RNVC: 2
REDI-EDGE POCKET PRO: RNCC: 5 | RNVC: 1

4 Nov 2003

5110-00-222-9024
Hand Reamer

002229024
5345285: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-220-9547
Dimpling Punch

002209547
48C19983-4: RNCC: 3 | RNVC: 2
MIL-D-922: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-221-1077
Blacksmith's Chisel

002211077
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL6: RNCC: 5 | RNVC: 1
45521: RNCC: 5 | RNVC: 2
GGG-T-563 TY1CL2: RNCC: 5 | RNVC: 9
GGG-T-00563: RNCC: 5 | RNVC: 9
GGG-T-563: RNCC: 5 | RNVC: 9
GGG-T-00563 TY1CL2: RNCC: 5 | RNVC: 9
HOTCH3HD: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-221-8121
Hand Diamond Point Chisel

002218121
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL4: RNCC: 5 | RNVC: 1
10600: RNCC: 5 | RNVC: 1
G10-8121: RNCC: 5 | RNVC: 2
22901: RNCC: 5 | RNVC: 2
B107.48 TY1CL4: RNCC: 5 | RNVC: 9
GGG-C-313 TY2STA: RNCC: 5 | RNVC: 9
GGG-C-313: RNCC: 5 | RNVC: 9
B107.48: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-222-2127
Hand Cold Chisel

002222127
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1
C-23: RNCC: 5 | RNVC: 2
MIL-C-21262: RNCC: 5 | RNVC: 9
MIL-T-16243: RNCC: 5 | RNVC: 9
A-A-2475: RNCC: 5 | RNVC: 9
B107.48: RNCC: 5 | RNVC: 9
B107.48 TY1CL2: RNCC: 5 | RNVC: 9
C-23-2069: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-309-5251
Single Bow Cutting Punch

013095251
NO.5PUNCH3/16IN: RNCC: 3 | RNVC: 2

19 Oct 1989

5110-01-606-7062
Hand Wire Stripper

016067062
45-080: RNCC: 3 | RNVC: 2
45-2786: RNCC: 5 | RNVC: 2

22 May 2012

5110-01-608-4671
Hand Wire Stripper

016084671
45-2811: RNCC: 3 | RNVC: 2

28 Jun 2012

5110-01-607-9980
Exposed Blade Tube Deburring Tool

016079980
ZTSE4393: RNCC: 3 | RNVC: 2

19 Jun 2012

5110-01-608-9886
Pocket Knife

016089886
01BO037: RNCC: 3 | RNVC: 2

13 Jul 2012

5110-00-188-0759
Hand Reamer

001880759
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY1CL1GRB: RNCC: 5 | RNVC: 9
102CS 1-3/4 IN.: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-4190
Hand Reamer

001864190
B94.2: RNCC: 3 | RNVC: 1
21492: RNCC: 5 | RNVC: 2
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY5CL1STAGRA: RNCC: 5 | RNVC: 9
1636: RNCC: 5 | RNVC: 9
21492: RNCC: 5 | RNVC: 9
1636: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-604-4739
Gasket Cutting Punch

016044739
FRS PGH8-7: RNCC: 3 | RNVC: 2

6 Apr 2012

5110-01-604-4722
Gasket Cutting Punch

016044722
FRS PGH8-4: RNCC: 3 | RNVC: 2

6 Apr 2012

5110-01-604-5568
Bolt Cutter

016045568
FRS 0390MHX: RNCC: 3 | RNVC: 2

8 Apr 2012

5110-01-380-5091
Bolt Cutter Jaws

013805091
0113NE: RNCC: 3 | RNVC: 2
A-A-3047: RNCC: 4 | RNVC: 1
A-A-3047 CL3: RNCC: 5 | RNVC: 1

21 Sep 1993

5110-01-039-9483
Hand File

010399483
A-A-2451: RNCC: 4 | RNVC: 1
37626: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
37626: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL10: RNCC: 5 | RNVC: 9

28 Apr 1977

5110-01-335-1365
Flexible Carbon Scraper

013351365
CS1: RNCC: 3 | RNVC: 2

6 Mar 1991

5110-01-335-1585
Hand File

013351585
16MA: RNCC: 3 | RNVC: 2

6 Mar 1991

5110-01-335-1519
Hand Wire Stripper-Crimper

013351519
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 37 TY2CL2: RNCC: 5 | RNVC: 1
PWC9: RNCC: 5 | RNVC: 2
B107.37: RNCC: 5 | RNVC: 9
B107.37 TY2CL2: RNCC: 5 | RNVC: 9

6 Mar 1991

5110-01-504-8008
Guard Cutter

015048008
WS-14: RNCC: 3 | RNVC: 2

10 Feb 2003

5110-01-560-9424
Diagonal Cutting Pliers

015609424
86EP: RNCC: 3 | RNVC: 2
86EP: RNCC: 3 | RNVC: 2

21 Feb 2008

5110-00-708-3456
Hand Reamer

007083456
7083456: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-556-2575
Hand Cable Stripper

015562575
VB1A: RNCC: 3 | RNVC: 9

27 Sep 2007

5110-01-520-5185
Pliers

015205185
Q-6257: RNCC: 3 | RNVC: 2
Q-6257: RNCC: 3 | RNVC: 2
352PL272: RNCC: 5 | RNVC: 2
7272E: RNCC: 5 | RNVC: 9

13 May 2004

5110-01-632-2703
Hand File

016322703
SGF6MA: RNCC: 3 | RNVC: 2

14 Oct 2014

5110-01-632-2709
Hand File

016322709
SGF6R: RNCC: 3 | RNVC: 2

14 Oct 2014

5110-00-180-0653
Hand Metal Cutting Shears

001800653
J7S: RNCC: 3 | RNVC: 2
57C: RNCC: 3 | RNVC: 2
J7S: RNCC: 5 | RNVC: 9
42450: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-358-3778
Wire Stripper Blade Set

013583778
45-2133-1: RNCC: 3 | RNVC: 2

13 May 1992

5110-01-616-3266
Diagonal Cutting Pliers

016163266
S511: RNCC: 3 | RNVC: 2

10 Feb 2013

5110-01-660-3182
Hand Operated Wire Rope Cutter

016603182
2193F: RNCC: 3 | RNVC: 2

17 Jan 2017

5110-01-661-6750
Hand Metal Cutting Shears

016616750
MW-P87S: RNCC: 3 | RNVC: 2
11A7000259: RNCC: 7 | RNVC: 2

13 Mar 2017

5110-01-582-8115
Bolt Cutter

015828115
BLPBC30: RNCC: 3 | RNVC: 2
BLPBC30: RNCC: 5 | RNVC: 2
BLPBC30A: RNCC: 5 | RNVC: 2

9 Mar 2010

5110-00-186-6722
Hand Reamer

001866722
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-203-4699
Hand File

002034699
A-A-2320: RNCC: 4 | RNVC: 1
GGG-F-325 TY17STA: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-203-5398
Hand File

002035398
5110-00-203-5398: RNCC: 3 | RNVC: 2
20667: RNCC: 5 | RNVC: 2
20667: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-580-9482
Sealant Scraper

015809482
41003-01: RNCC: 3 | RNVC: 2

30 Dec 2009

5110-01-502-9973
Knife Blade

015029973
80C7-HS: RNCC: 3 | RNVC: 2
80C7-HS: RNCC: 3 | RNVC: 9

27 Nov 2002

5110-00-199-0458
Hand Reamer

001990458
B94.2: RNCC: 3 | RNVC: 1
31020: RNCC: 5 | RNVC: 9
1002A: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL3: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
31020: RNCC: C | RNVC: 1

1 Jan 1963

5110-01-657-3672
Hand File

016573672
80086: RNCC: 3 | RNVC: 2
37779: RNCC: 5 | RNVC: 2

9 Aug 2016

5110-01-231-5709
Stripping Tool

012315709
901-3: RNCC: 3 | RNVC: 2
WS-8: RNCC: 5 | RNVC: 2
WS-8: RNCC: 5 | RNVC: 2

30 Apr 1986

5110-01-231-5711
Stripping Tool

012315711
901-5: RNCC: 3 | RNVC: 2
WS-10: RNCC: 5 | RNVC: 2
WS-10: RNCC: 5 | RNVC: 2

30 Apr 1986

5110-00-186-6729
Hand Reamer

001866729
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
103HS 49/64 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-654-2562
Hand Operated Wire Rope Cutter

016542562
WMC-2000: RNCC: 3 | RNVC: 2

22 Apr 2016

5110-01-654-2146
Diagonal Cutting Pliers

016542146
67-103: RNCC: 3 | RNVC: 2

21 Apr 2016

5110-01-654-0377
Hand Metal Cutting Shears

016540377
AVSNP02000: RNCC: 3 | RNVC: 2

15 Apr 2016

5110-01-575-9186
Drill Reamer

015759186
3854AS500-2: RNCC: 3 | RNVC: 2
3854AS500-2: RNCC: 5 | RNVC: 2
3854AS500-2: RNCC: 5 | RNVC: 2
3854AS500-2: RNCC: 5 | RNVC: 2
3854AS500-2: RNCC: 5 | RNVC: 2
3854AS500-2: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-218-8607
Deburring Footpiece

012188607
ZT339012: RNCC: 3 | RNVC: 2

20 Oct 1985

5110-01-575-9197
Drill Reamer

015759197
3854AS400-19: RNCC: 3 | RNVC: 2
3854AS400-19: RNCC: 5 | RNVC: 2
3854AS400-19: RNCC: 5 | RNVC: 2
3854AS400-19: RNCC: 5 | RNVC: 2
3854AS400-19: RNCC: 5 | RNVC: 2
3854AS400-19: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9119
Piloted Reamer

015759119
3854AS300-35: RNCC: 3 | RNVC: 2
3854AS300-35: RNCC: 5 | RNVC: 2
3854AS300-35: RNCC: 5 | RNVC: 2
3854AS300-35: RNCC: 5 | RNVC: 2
3854AS300-35: RNCC: 5 | RNVC: 2
3854AS300-35: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9161
Drill Reamer

015759161
3854AS400-3: RNCC: 3 | RNVC: 2
3854AS400-3: RNCC: 5 | RNVC: 2
3854AS400-3: RNCC: 5 | RNVC: 2
3854AS400-3: RNCC: 5 | RNVC: 2
3854AS400-3: RNCC: 5 | RNVC: 2
3854AS400-3: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9128
Piloted Reamer

015759128
3854AS300-41: RNCC: 3 | RNVC: 2
3854AS300-41: RNCC: 5 | RNVC: 2
3854AS300-41: RNCC: 5 | RNVC: 2
3854AS300-41: RNCC: 5 | RNVC: 2
3854AS300-41: RNCC: 5 | RNVC: 2
3854AS300-41: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-588-0768
End Cutting Nippers

015880768
BDGEC7: RNCC: 3 | RNVC: 2

31 Aug 2010

5110-01-525-3702
Scraper Blade

015253702
232650: RNCC: 3 | RNVC: 2

4 Nov 2004

5110-01-648-7921
Thread Restorer File

016487921
53-2665-0004: RNCC: 3 | RNVC: 2

6 Oct 2015

5110-01-524-0453
Dimpling Die

015240453
ZT1792-3-4: RNCC: 3 | RNVC: 2

22 Sep 2004

5110-01-523-9991
Dimpling Die Body

015239991
ZT187301-3/16: RNCC: 3 | RNVC: 2

21 Sep 2004

5110-01-524-5435
Hand File

015245435
HBF4MA: RNCC: 3 | RNVC: 2
HB4MA: RNCC: 5 | RNVC: 9

6 Oct 2004

5110-01-575-9193
Drill Reamer

015759193
3854AS400-12: RNCC: 3 | RNVC: 2
3854AS400-12: RNCC: 5 | RNVC: 2
3854AS400-12: RNCC: 5 | RNVC: 2
3854AS400-12: RNCC: 5 | RNVC: 2
3854AS400-12: RNCC: 5 | RNVC: 2
3854AS400-12: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-579-6331
Hand Reamer

015796331
RG288-3: RNCC: 3 | RNVC: 2

18 Nov 2009

5110-01-540-1129
Bushing Removal Tool

015401129
5HG90819-101: RNCC: 3 | RNVC: 2

9 May 2006

5110-01-694-0348
Hand Metal Cutting Shears

016940348
CS-SBK-S8A-DK: RNCC: 3 | RNVC: 2

15 Mar 2021

5110-01-696-0062
Hand Operated Cable Cutter

016960062
SEI-GC-001: RNCC: 3 | RNVC: 2

2 Jul 2021

5110-01-575-9158
Piloted Reamer

015759158
3854AS300-20: RNCC: 3 | RNVC: 2
3854AS300-20: RNCC: 5 | RNVC: 2
3854AS300-20: RNCC: 5 | RNVC: 2
3854AS300-20: RNCC: 5 | RNVC: 2
3854AS300-20: RNCC: 5 | RNVC: 2
3854AS300-20: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-00-490-3885
Die-Dimpling Female

004903885
33D902-3: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-692-6454
Hand Bull Point Chisel

016926454
3255: RNCC: 3 | RNVC: 2

31 Dec 2020

5110-01-537-5834
Dimpling Die

015375834
AT252DB-8: RNCC: 3 | RNVC: 9
AT252DB-8: RNCC: C | RNVC: 1

14 Feb 2006

5110-00-313-9488
Hand Reamer

003139488
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY15CL1GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
6595210: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-624-7647
Knockout Punch And Die

016247647
MP4120: RNCC: 3 | RNVC: 2

14 Jan 2014

5110-01-684-2879
Crimp Tool Kit

016842879
13782722: RNCC: 3 | RNVC: 2
829-13782722: RNCC: 5 | RNVC: 2

28 Oct 2019

5110-01-685-5148
Pocket Folding Multi-Tool

016855148
7-370: RNCC: 3 | RNVC: 2

20 Dec 2019

5110-01-686-3299
Hand Reamer

016863299
29656: RNCC: 3 | RNVC: 2

10 Feb 2020

5110-01-686-1108
Flexible Armored Cable Cutter And Crimper

016861108
M12 CC-0: RNCC: 3 | RNVC: 2

30 Jan 2020

5110-00-529-3206
Hand File

005293206
A-A-2321: RNCC: 4 | RNVC: 1
14547: RNCC: 5 | RNVC: 2
GGG-F-325 TY18CL3: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
14547: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-529-4974
Firmer Gouge

005294974
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY2CL1STA: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-01-623-0840
Putty Knife Set

016230840
28-209: RNCC: 3 | RNVC: 2

31 Oct 2013

5110-01-623-5049
Hand Cable Stripper

016235049
45-2739: RNCC: 3 | RNVC: 2

18 Nov 2013

5110-01-516-4524
Metal Cutting Hand Saw

015164524
HS151: RNCC: 3 | RNVC: 2

7 Jan 2004

5110-01-518-3179
Diagonal Cutting Pliers

015183179
SJ603V: RNCC: 3 | RNVC: 2

8 Mar 2004

5110-01-657-1486
Hand Cable Stripper

016571486
MODEL 4A: RNCC: 3 | RNVC: 2
MODEL 4A: RNCC: 5 | RNVC: 2
MODEL 4A: RNCC: 5 | RNVC: 2

1 Aug 2016

5110-01-533-5809
Dimpling Die

015335809
AT252G1: RNCC: 3 | RNVC: 2
AT252G1: RNCC: 3 | RNVC: 9

20 Sep 2005

5110-01-533-9031
Hand Reamer

015339031
105505: RNCC: 3 | RNVC: 2

29 Sep 2005

5110-00-293-2426
Hardy

002932426
GGG-T-00563: RNCC: 4 | RNVC: 1
GGG-T-00563 TY5: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-293-2495
Jeweler's Saw Blade

002932495
GGG-B-471: RNCC: 4 | RNVC: 1
GGG-B-471 TY2: RNCC: 5 | RNVC: 1
49.405: RNCC: 5 | RNVC: 2
SBX3Z: RNCC: 5 | RNVC: 9
41899I: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-0388
Craftsman's Knife

002930388
5110-00-293-0388: RNCC: 3 | RNVC: 2
GGG-K-481: RNCC: 4 | RNVC: 1
GGG-K-481 TY1CL1: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-01-440-4216
Hand Reamer

014404216
24272: RNCC: 3 | RNVC: 9
LIST659 5/0: RNCC: 5 | RNVC: 1
659 5/0: RNCC: 5 | RNVC: 9
24272: RNCC: 5 | RNVC: 9
659 5/0: RNCC: 5 | RNVC: 9

13 Jan 1997

5110-01-620-2018
Hand Metal Stamping Die Set

016202018
FSPP-103-00-011: RNCC: 3 | RNVC: 2

9 Jul 2013

5110-00-518-2894
Crash Axe

005182894
443: RNCC: 3 | RNVC: 9

25 Jun 1971

5110-00-473-7275
Hand Reamer

004737275
6296138: RNCC: 3 | RNVC: 2
C-265: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-473-7293
Hand Reamer

004737293
6248357: RNCC: 3 | RNVC: 2
T53: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-473-7296
Hand Reamer

004737296
7078161: RNCC: 3 | RNVC: 2
D59695T1: RNCC: 5 | RNVC: 9
D59695T1: RNCC: 5 | RNVC: 9
D59695T1: RNCC: C | RNVC: 1

1 Jan 1963

5110-00-473-1047
Tool Lapping

004731047
480-201PCQ3: RNCC: 3 | RNVC: 2
480-417PCQ3: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-272-8983
Hand Round Nose Chisel

002728983
5110-00-272-8983: RNCC: 3 | RNVC: 2
C-73: RNCC: 3 | RNVC: 2
GGG-C-313: RNCC: 5 | RNVC: 9
GGG-C-313 TY6CL2STA: RNCC: 5 | RNVC: 9
G10-8983: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-273-8474
Hand Cape Chisel

002738474
C-5: RNCC: 3 | RNVC: 2
C-235A: RNCC: 3 | RNVC: 2
GGG-C-313: RNCC: 5 | RNVC: 9
GGG-C-313 TY1STA: RNCC: 5 | RNVC: 9
C-5: RNCC: 5 | RNVC: 9
C-235A-2048: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-431-0669
Diagonal Cutting Pliers Set

014310669
B107.500: RNCC: 3 | RNVC: 1
PS3SC: RNCC: 3 | RNVC: 2
B107.500 CAT 11 TY1CL1: RNCC: 5 | RNVC: 1

7 May 1996

5110-01-430-5050
Pocket Folding Multi-Tool

014305050
61070201: RNCC: 3 | RNVC: 2
PST II: RNCC: 5 | RNVC: 1

30 Apr 1996

5110-01-614-3261
Pocket Folding Multi-Tool

016143261
830088: RNCC: 3 | RNVC: 2

30 Nov 2012

5110-01-430-1435
Hand Wire Stripper-Crimper

014301435
WT105: RNCC: 3 | RNVC: 2

24 Apr 1996

5110-01-429-7470
Craftsman's Knife

014297470
YA583: RNCC: 3 | RNVC: 2

17 Apr 1996

5110-01-429-7124
Hand Operated Cable Cutter

014297124
35-053: RNCC: 3 | RNVC: 2
35-053: RNCC: 5 | RNVC: 9
35-053: RNCC: 5 | RNVC: 9

17 Apr 1996

5110-01-646-1575
Pocket Folding Multi-Tool

016461575
GUN TOOL PRO-AR15: RNCC: 3 | RNVC: 2

14 Jul 2015

5110-01-645-8171
Hand Wire Stripper

016458171
W-HT-1921-P: RNCC: 3 | RNVC: 2

30 Jun 2015

5110-01-646-6371
Scraping Knife

016466371
235079: RNCC: 3 | RNVC: 2
235079: RNCC: 5 | RNVC: 2

27 Jul 2015

5110-01-666-7915
Pipe Cutter Cutting Wheel

016667915
48380010: RNCC: 3 | RNVC: 2

20 Sep 2017

5110-01-666-4194
Pocket Knife

016664194
KER1660SO: RNCC: 3 | RNVC: 2

6 Sep 2017

5110-00-803-6338
Nut Splitting Chisel

008036338
NC52-3: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-548-2764
Hand Optical Fiber Stripper

015482764
FTI010: RNCC: 3 | RNVC: 9

15 Feb 2007

5110-01-426-7900
Hand Cable Stripper

014267900
3CSKGN: RNCC: 3 | RNVC: 2
618ST018: RNCC: 5 | RNVC: 2
3-274: RNCC: 5 | RNVC: 2
48944: RNCC: 5 | RNVC: 2
3CSKGN: RNCC: 5 | RNVC: 9
48944: RNCC: 5 | RNVC: 9

18 Mar 1996

5110-01-644-3081
Hand File

016443081
FO-R-12B: RNCC: 3 | RNVC: 2
JA-007: RNCC: 5 | RNVC: 2

29 Apr 2015

5110-01-489-6087
Wire Stripper Blade Set

014896087
462ST212: RNCC: 3 | RNVC: 2

18 Sep 2001

5110-01-662-5656
Hand Cold Chisel

016625656
MA 1230: RNCC: 3 | RNVC: 2
C-18: RNCC: 5 | RNVC: 2

12 Apr 2017

5110-01-547-0062
Tube Cutter

015470062
S45056-Z479-A4: RNCC: 3 | RNVC: 9

10 Jan 2007

5110-01-642-0139
Hand Optical Fiber Cleaving Tool

016420139
FBC-007: RNCC: 3 | RNVC: 2
FBC-007: RNCC: 5 | RNVC: 2

10 Feb 2015

5110-01-642-5825
Hand Wire Stripper

016425825
758PL0032: RNCC: 3 | RNVC: 2

3 Mar 2015

5110-01-642-6866
Hand Cable Stripper

016426866
2CSKB: RNCC: 3 | RNVC: 2

5 Mar 2015

5110-01-642-3676
Wood Scraper

016423676
PKWSS53A: RNCC: 3 | RNVC: 2

24 Feb 2015

5110-01-661-6298
Hand Metal Stamping Die Set

016616298
22150: RNCC: 3 | RNVC: 2
11A7000031: RNCC: 7 | RNVC: 2

10 Mar 2017

5110-00-245-4178
Hand File

002454178
5110-00-245-4178: RNCC: 3 | RNVC: 2
A-A-2442: RNCC: 4 | RNVC: 1
37793: RNCC: 5 | RNVC: 2
GGG-F-331 TY18CL1: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
37793: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-245-3539
Hand File

002453539
A-A-2321: RNCC: 4 | RNVC: 1
14341: RNCC: 5 | RNVC: 2
14341: RNCC: 5 | RNVC: 9
GGG-F-325 TY18CL2: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-486-7949
Hand Reamer

014867949
J22342-5: RNCC: 3 | RNVC: 2

16 Jul 2001

5110-01-559-9272
Hand Optical Fiber Stripper

015599272
0700-3125: RNCC: 3 | RNVC: 2
1171: RNCC: 5 | RNVC: 2

10 Jan 2008

5110-01-483-3797
Hand Optical Fiber Cleaving Tool

014833797
DT03732-05: RNCC: 3 | RNVC: 2

27 Mar 2001

5110-01-547-9120
Pocket Knife

015479120
KFE-2000-00: RNCC: 3 | RNVC: 2

2 Feb 2007

5110-01-541-0583
Pocket Folding Multi-Tool

015410583
830269: RNCC: 3 | RNVC: 1
MULTITOOL 19 IN EEN ZWART: RNCC: 5 | RNVC: 2
CORE/BLACK/NYLON: RNCC: 5 | RNVC: 2

14 Jun 2006

5110-01-429-3596
Dimpling Die

014293596
ATI207A-5-P: RNCC: 3 | RNVC: 2
AT207A-5-P: RNCC: 5 | RNVC: 9
AT207A-5-P: RNCC: C | RNVC: 1

9 Apr 1996

5110-00-224-9928
Ship Scraper

002249928
PD5110-00-224-9928: RNCC: 3 | RNVC: 2
343-B: RNCC: 5 | RNVC: 2
GGG-S-116 TY2: RNCC: 5 | RNVC: 9
GGG-S-116: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-245-0402
Bow Saw Blade

012450402
5110-01-245-0402: RNCC: 3 | RNVC: 2
BS36: RNCC: 5 | RNVC: 2
GGG-S-64 TY3STD BLADE ONLY: RNCC: 5 | RNVC: 9
GGG-S-64: RNCC: 5 | RNVC: 9

23 Nov 1986

5110-01-555-8501
Dimpling Punch

015558501
F-20 3/8 IN.: RNCC: 3 | RNVC: 2
N02662: RNCC: 5 | RNVC: 2

17 Sep 2007

5110-01-556-8021
Police Restraint Cutter

015568021
4003: RNCC: 3 | RNVC: 2

5 Oct 2007

5110-01-604-4709
Gasket Cutting Punch

016044709
PGH8-12: RNCC: 3 | RNVC: 2
FRS PGH8-12: RNCC: 5 | RNVC: 9

6 Apr 2012

5110-00-220-9532
Dimpling Die

002209532
48C19983-13: RNCC: 3 | RNVC: 2
MIL-D-922: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-220-9534
Dimpling Die

002209534
48C19983-19: RNCC: 3 | RNVC: 1
1801: RNCC: 3 | RNVC: 1
MIL-D-922 TY2: RNCC: 5 | RNVC: 1
MIL-D-922: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-632-2708
Hand File

016322708
SGF6T: RNCC: 3 | RNVC: 2

14 Oct 2014

5110-01-553-8605
Scraping Knife Set

015538605
SGCSA300A: RNCC: 3 | RNVC: 2

26 Jul 2007

5110-01-554-4532
Drill Rod Guide Scraper Plate

015544532
102111: RNCC: 3 | RNVC: 2

9 Aug 2007

5110-00-237-8094
Compass Saw

002378094
GGG-S-65: RNCC: 4 | RNVC: 1
GGG-S-65 TY4: RNCC: 5 | RNVC: 1
F1268: RNCC: 5 | RNVC: 9
5110-00-237-8094: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-237-8107
Hand Hacksaw Blade

002378107
GGG-B-451: RNCC: 4 | RNVC: 1
GGG-B-451 TY1GRACL1: RNCC: 5 | RNVC: 1
41B1169-20: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-6888
Hand File

002396888
A-A-2317: RNCC: 4 | RNVC: 1
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY14STA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-631-6114
Hand Cold Chisel

016316114
J86A3/16: RNCC: 3 | RNVC: 2

19 Sep 2014

5110-01-631-3771
Craftsman's Knife Set

016313771
STA010129: RNCC: 3 | RNVC: 2

11 Sep 2014

5110-01-676-5998
Metal Cutting Hand Saw

016765998
2782-20: RNCC: 3 | RNVC: 2

2 Nov 2018

5110-01-678-1204
Pipe Cutter

016781204
CF-1041: RNCC: 3 | RNVC: 2

22 Jan 2019

5110-01-678-1090
Scraping Knife

016781090
235084: RNCC: 3 | RNVC: 2

22 Jan 2019

5110-01-679-2193
Hand File Set

016792193
22-314: RNCC: 3 | RNVC: 2

14 Mar 2019

5110-00-223-7780
Craftsman's Knife

002237780
GGG-K-481: RNCC: 4 | RNVC: 1
GGG-K-481 TY2CL2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-01-398-7969
Hand Metal Cutting Shears

013987969
B107.500: RNCC: 3 | RNVC: 1
B107.16 TY2CL1: RNCC: 5 | RNVC: 1
B107.16: RNCC: 5 | RNVC: 1
MPC3: RNCC: 5 | RNVC: 2
MPC-3 COOPER/WISS: RNCC: 5 | RNVC: 2
B107.16M: RNCC: 5 | RNVC: 9
B107.16M TY2CL1: RNCC: 5 | RNVC: 9
MPC3: RNCC: 5 | RNVC: 9
GGG-S-291 TY2CL4DE1SZ9: RNCC: 5 | RNVC: 9
GGG-S-291: RNCC: 5 | RNVC: 9

9 Nov 1994

5110-00-223-7779
Craftsman's Knife

002237779
GGG-K-481: RNCC: 4 | RNVC: 1
GGG-K-481 TY2CL3: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-01-671-7484
Knockout Punch And Die

016717484
KD1250B: RNCC: 3 | RNVC: 2

9 Apr 2018

5110-01-671-8333
Knockout Punch And Die

016718333
KD1000B: RNCC: 3 | RNVC: 2

12 Apr 2018

5110-01-672-6184
Knife Blade

016726184
11-983: RNCC: 3 | RNVC: 2

9 May 2018

5110-01-672-2643
Hand Optical Fiber Stripper

016722643
AFT-T-223-S: RNCC: 3 | RNVC: 2

26 Apr 2018

5110-01-672-8402
Pliers

016728402
14100396: RNCC: 3 | RNVC: 2

18 May 2018

5110-00-480-6790
Fitting Repai Facer

004806790
PWA18810: RNCC: 3 | RNVC: 2

2 Sep 1970

5110-01-393-8332
Wire Stripper Blade

013938332
990342: RNCC: 3 | RNVC: 2
990342: RNCC: 5 | RNVC: 9

27 Jul 1994

5110-01-545-3734
Hand File Set

015453734
60304987: RNCC: 3 | RNVC: 2
37761: RNCC: 3 | RNVC: 2
WWG1F957: RNCC: 5 | RNVC: 2
0817954: RNCC: 5 | RNVC: 2
37761: RNCC: 5 | RNVC: 9

13 Nov 2006

5110-01-201-3184
Diagonal Cutting Pliers

012013184
P-210: RNCC: 3 | RNVC: 9
MIL-P-19290: RNCC: 5 | RNVC: 9

14 Feb 1985

5110-00-156-0108
Hand File

001560108
5110-00-156-0108: RNCC: 3 | RNVC: 2
39935: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
39935: RNCC: 5 | RNVC: 9
A-A-2434: RNCC: 5 | RNVC: 9
GGG-F-331 TY11CL3: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-156-0249
Hand File

001560249
41196: RNCC: 3 | RNVC: 2
31.348: RNCC: 3 | RNVC: 2
84-58850: RNCC: 5 | RNVC: 9
41196: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-289-6594
Hand Reamer

012896594
AFT74R330003-T8: RNCC: 3 | RNVC: 2

28 Nov 1988

5110-01-288-3474
Knockout Punch And Die

012883474
ZT3811-3-16: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-288-3469
Knockout Punch And Die

012883469
ZT2968-8: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-288-3467
Knockout Punch And Die

012883467
ZT2968-1-4-28: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-288-3432
Dimpling Punch

012883432
ZT3855-1/8: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-00-149-1435
Riffler

001491435
5110-00-149-1435: RNCC: 3 | RNVC: 2
36180: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
A-A-2472: RNCC: 5 | RNVC: 9
GGG-F-331 TY20CL18: RNCC: 5 | RNVC: 9
MS15685-2: RNCC: 5 | RNVC: 9
36180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-973-5319
Knockout Punch And Die

009735319
731 1-2: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-01-537-5163
Hand Wire Stripper

015375163
3913AS100-1: RNCC: 3 | RNVC: 2

10 Feb 2006

5110-00-707-9864
Hand Reamer

007079864
7079864: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-156-0052
Hand File

001560052
A-A-2313: RNCC: 4 | RNVC: 1
A-A-2313 TY1: RNCC: 5 | RNVC: 1
05968N: RNCC: 5 | RNVC: 2
05968: RNCC: 5 | RNVC: 9
05968: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY10CL2STA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-531-3075
General Knife Sharpener

015313075
REOMT204MINI: RNCC: 3 | RNVC: 2

1 Jul 2005

5110-00-640-5421
Firmer Chisel

006405421
PD5110-00-449-6907: RNCC: 3 | RNVC: 1
303: RNCC: 5 | RNVC: 2
GGG-C-311: RNCC: 5 | RNVC: 9
PVC050: RNCC: 5 | RNVC: 9
GGG-C-311 TY1CL4STA OR C: RNCC: 5 | RNVC: 9
303: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-508-5089
Hand Wire Stripper

015085089
MINISTRIP: RNCC: 3 | RNVC: 9

22 May 2003

5110-01-367-7247
Diagonal Cutting Pliers

013677247
B107.500: RNCC: 3 | RNVC: 1
4008SD: RNCC: 3 | RNVC: 2
B107.500 CAT 11 TY2CL3: RNCC: 5 | RNVC: 1
B107.11: RNCC: 5 | RNVC: 9
B107.11 TY2CL3: RNCC: 5 | RNVC: 9
40S: RNCC: 5 | RNVC: 9

18 Nov 1992

5110-01-231-5712
Stripping Tool

012315712
901-6: RNCC: 3 | RNVC: 2
WS-11: RNCC: 5 | RNVC: 2
WS-11: RNCC: 5 | RNVC: 2

30 Apr 1986

5110-01-365-8611
Hand File

013658611
73-14650: RNCC: 3 | RNVC: 2
73-14650 SIMONDS: RNCC: 5 | RNVC: 2

15 Oct 1992

5110-01-502-9242
Bearing Scraper

015029242
TP790: RNCC: 3 | RNVC: 2

25 Nov 2002

5110-01-231-5719
Stripping Tool

012315719
901-F: RNCC: 3 | RNVC: 2
WS-6: RNCC: 5 | RNVC: 2
WS-6: RNCC: 5 | RNVC: 2

30 Apr 1986

5110-01-558-4187
Pocket Folding Multi-Tool

015584187
830252 SURGE: RNCC: 3 | RNVC: 2

8 Nov 2007

5110-01-343-3858
Hand Operated Cable Cutter

013433858
BL-11690-1: RNCC: 3 | RNVC: 2

12 Aug 1991

5110-01-476-0474
Woodworking Butt Chisel

014760474
1020A: RNCC: 3 | RNVC: 2

22 Jun 2000

5110-00-250-6512
Hand File

002506512
A-A-2309: RNCC: 4 | RNVC: 1
01387: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY4: RNCC: 5 | RNVC: 9
01387: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-168-9462
Craftsman's Knife Set

011689462
7055A12: RNCC: 3 | RNVC: 2
7055A11: RNCC: 5 | RNVC: 9

29 Dec 1983

5110-01-473-9697
Hand Bull Point Chisel

014739697
B107.410: RNCC: 3 | RNVC: 1
85092: RNCC: 3 | RNVC: 2
B107.410 CAT48 TY1CL6: RNCC: 5 | RNVC: 1
85092 MAYHEW: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-473-9969
Hand Cable Ripper

014739969
74017: RNCC: 3 | RNVC: 2
74018 KLEIN: RNCC: 5 | RNVC: 9
74018: RNCC: 5 | RNVC: 9

20 Apr 2000

5110-01-474-5498
Pocket Folding Multi-Tool

014745498
TZ1D: RNCC: 3 | RNVC: 9
TZ1D COOPER/CRESCENT: RNCC: 5 | RNVC: 9
TZ1D: RNCC: 5 | RNVC: 9

5 May 2000

5110-00-242-8179
Hand File

002428179
A-A-2309: RNCC: 4 | RNVC: 1
01327: RNCC: 5 | RNVC: 2
GGG-F-325 TY4: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
01327: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-473-9774
Pipe Cutter

014739774
32840: RNCC: 3 | RNVC: 1
RID 32840: RNCC: 5 | RNVC: 1
RID 4-S: RNCC: 5 | RNVC: 1
4-S: RNCC: 5 | RNVC: 1

20 Apr 2000

5110-01-009-1224
Hand File

010091224
20582: RNCC: 3 | RNVC: 2
20582: RNCC: 5 | RNVC: 9

4 Sep 1975

5110-01-554-2906
Knockout Punch And Die

015542906
XPT: RNCC: 3 | RNVC: 2
XPT: RNCC: 5 | RNVC: 2

3 Aug 2007

5110-00-795-0124
Hand Reamer

007950124
7950124: RNCC: 3 | RNVC: 2
J7007: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-01-181-1780
Deburring Tool Kit

011811780
60317: RNCC: 3 | RNVC: 9

7 Jun 1984

5110-01-674-4548
Scraper Blade

016744548
TE05-091C: RNCC: 3 | RNVC: 2

27 Jul 2018

5110-01-674-3913
Hand Operated Wire Rope Cutter

016743913
901031-0: RNCC: 3 | RNVC: 2

25 Jul 2018

5110-01-678-0722
Hand Reamer

016780722
CBR-6-1-N-1-.2026: RNCC: 3 | RNVC: 2

18 Jan 2019

5110-01-677-9343
Hand Cable Stripper

016779343
TSK8002: RNCC: 3 | RNVC: 2

14 Jan 2019

5110-01-677-9405
Pliers

016779405
LCC - NEEDLE NOSE - 230: RNCC: 3 | RNVC: 2

14 Jan 2019

5110-00-293-0251
Tinner's Hollow Cutting Punch

002930251
GGG-P-833: RNCC: 4 | RNVC: 1
GGG-P-833 TY1CLCST1SZ2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-294-4602
Hand Reamer

002944602
53C20381-5590: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-473-7294
Hand Reamer

004737294
213606: RNCC: 3 | RNVC: 2
6248606: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-473-7277
Hand Reamer

004737277
221626: RNCC: 3 | RNVC: 2
5345289: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-473-7308
Refacer

004737308
6298895: RNCC: 3 | RNVC: 2
C-551: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-670-9836
Brick Chisel

016709836
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 50 TY1: RNCC: 5 | RNVC: 1
G435: RNCC: 5 | RNVC: 2
B107.50 TY1: RNCC: 5 | RNVC: 9
B107.50: RNCC: 5 | RNVC: 9

15 Mar 2018

5110-01-671-8329
Knockout Punch And Die

016718329
KP750B: RNCC: 3 | RNVC: 2

12 Apr 2018

5110-01-671-8032
Hand Tile Cutter

016718032
ST007: RNCC: 3 | RNVC: 2

11 Apr 2018

5110-01-548-5448
Scraper Blade

015485448
060-36-16: RNCC: 3 | RNVC: 2
060DH2-211: RNCC: 5 | RNVC: 9

26 Feb 2007

5110-01-088-6543
Diagonal Cutting Pliers

010886543
RV57: RNCC: 3 | RNVC: 2
RV57: RNCC: 5 | RNVC: 9
RV57: RNCC: 5 | RNVC: 9

16 Jan 1980

5110-01-608-4416
Cable Stripper Blade

016084416
45-2811-1: RNCC: 3 | RNVC: 2

27 Jun 2012

5110-00-566-5146
Hand Graver

005665146
38102: RNCC: 3 | RNVC: 2

22 Nov 1967

5110-01-606-4523
Pipe Cutter

016064523
50767: RNCC: 3 | RNVC: 2

18 May 2012

5110-01-232-1214
Cable Cutter Die

012321214
2498 CABLE CUTTER: RNCC: 3 | RNVC: 2
2498: RNCC: 5 | RNVC: 9

9 May 1986

5110-01-604-4706
Gasket Cutting Punch

016044706
PGH8-11: RNCC: 3 | RNVC: 2
FRS PGH8-11: RNCC: 5 | RNVC: 9

6 Apr 2012

5110-01-604-3535
Hand File

016043535
1-104-10-2-0: RNCC: 3 | RNVC: 2
FRS 1-104-10-2-0: RNCC: 5 | RNVC: 9

3 Apr 2012

5110-01-603-7186
Hand Cable Stripper

016037186
37720: RNCC: 3 | RNVC: 2
CAT-AS: RNCC: 5 | RNVC: 2

12 Mar 2012

5110-00-567-3700
Aircraft Ejection Seat Disarming Tool

005673700
ATI501C: RNCC: 3 | RNVC: 2
AT501C: RNCC: 5 | RNVC: 2
AT501C: RNCC: 5 | RNVC: 9
AT501C: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-600-3360
Circle Cutter

016003360
02-21009: RNCC: 3 | RNVC: 2

25 Nov 2011

5110-00-449-7317
Gasket Cutting Punch

004497317
5110-00-449-7317: RNCC: 3 | RNVC: 2
744R: RNCC: 3 | RNVC: 2
HP14: RNCC: 5 | RNVC: 9
PGH8-5: RNCC: 5 | RNVC: 9
744: RNCC: 5 | RNVC: 9
FRS PGH8-5: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-491-6780
Hand Operated Wire Rope Cutter

014916780
853440-6: RNCC: 3 | RNVC: 2

29 Oct 2001

5110-01-523-9999
Dimpling Punch

015239999
ZT1875-1/4: RNCC: 3 | RNVC: 2

21 Sep 2004

5110-01-524-0452
Dimpling Die

015240452
ZT187302-5-16: RNCC: 3 | RNVC: 2

22 Sep 2004

5110-01-489-5984
Diagonal Cutting Pliers

014895984
294PL154: RNCC: 3 | RNVC: 2
MS54-5J: RNCC: 5 | RNVC: 9
MS54-5J: RNCC: C | RNVC: 1

18 Sep 2001

5110-00-203-9035
Hand Reamer

002039035
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
125RB: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
761-1250-000: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-204-0616
Hand File

002040616
A-A-2310: RNCC: 4 | RNVC: 1
02435: RNCC: 5 | RNVC: 2
GGG-F-325 TY5: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
02435: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-231-5720
Stripping Tool

012315720
901-G: RNCC: 3 | RNVC: 2
WS-7: RNCC: 5 | RNVC: 2
WS-7: RNCC: 5 | RNVC: 2

30 Apr 1986

5110-00-222-0457
Claw Hatchet

002220457
5110-00-222-0457: RNCC: 3 | RNVC: 2
GGG-H-131 TYB: RNCC: 5 | RNVC: 9
GGG-H-131: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-224-3857
Hand Reamer

002243857
50031BTYPEA1GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-542-1350
Diagonal Cutting Pliers

005421350
B107.500: RNCC: 3 | RNVC: 1
B107.11 TY2STA: RNCC: 5 | RNVC: 1
B107.11: RNCC: 5 | RNVC: 1
A-A-2330: RNCC: 5 | RNVC: 9
GGG-P-468 TY2STA: RNCC: 5 | RNVC: 9
GGG-P-468: RNCC: 5 | RNVC: 9
441-5-1/2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-518-2104
Single Bit Ax

015182104
E3-24A: RNCC: 3 | RNVC: 2

4 Mar 2004

5110-01-518-2270
Bolt Cutter

015182270
BC30: RNCC: 3 | RNVC: 2

4 Mar 2004

5110-01-518-1632
Hand File

015181632
21853: RNCC: 3 | RNVC: 2
21853: RNCC: 5 | RNVC: 9

3 Mar 2004

5110-00-199-0465
Hand Reamer

001990465
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
1008: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL3: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-220-9539
Dimpling Die

002209539
48C19983-23: RNCC: 3 | RNVC: 2
MIL-D-922: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-696-8000
Pipe Cutter

016968000
424S: RNCC: 3 | RNVC: 2

18 Aug 2021

5110-00-520-9719
Hand Reamer

005209719
8708143: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-516-3847
Riffler

005163847
31.822: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-692-6360
Hand Wire Stripper

016926360
582781: RNCC: 3 | RNVC: 9

30 Dec 2020

5110-01-693-6309
Hand File Set

016936309
SGFHR104: RNCC: 3 | RNVC: 2

24 Feb 2021

5110-01-004-5952
Die Assembly Ram

010045952
ZT187802-1-4: RNCC: 3 | RNVC: 2

10 Jun 1975

5110-01-004-5962
Die Assembly Ram

010045962
ZT185302-1-8: RNCC: 3 | RNVC: 2

10 Jun 1975

5110-01-524-6023
Hand File

015246023
HBF4R: RNCC: 3 | RNVC: 2
HB4R: RNCC: 5 | RNVC: 9

7 Oct 2004

5110-01-686-5662
Hand Cold Chisel

016865662
724G5028-201: RNCC: 3 | RNVC: 2

24 Feb 2020

5110-01-686-8864
Hand Cable Stripper

016868864
STC-F: RNCC: 3 | RNVC: 2

9 Mar 2020

5110-01-015-2160
Tape Punch

010152160
52C1435-3: RNCC: 3 | RNVC: 2
52C1435-3: RNCC: 5 | RNVC: 9

16 Jan 1976

5110-01-682-0465
Diagonal Cutting Pliers

016820465
66025200: RNCC: 3 | RNVC: 9
66025200: RNCC: 5 | RNVC: 2

18 Jul 2019

5110-01-684-4383
Hand Wire Stripper

016844383
FORS-050011500: RNCC: 3 | RNVC: 2

3 Nov 2019

5110-01-684-8957
Hand Optical Fiber Cleaving Tool

016848957
FORS-140M11100: RNCC: 3 | RNVC: 2

19 Nov 2019

5110-01-423-8503
Pliers

014238503
659ACP: RNCC: 3 | RNVC: 2
659ACP: RNCC: 5 | RNVC: 2
659CP: RNCC: 5 | RNVC: 9

11 Jan 1996

5110-01-189-2371
Wire Wrapping Tool Bit

011892371
KB224: RNCC: 3 | RNVC: 9
117-999: RNCC: 5 | RNVC: 2
122X424: RNCC: 5 | RNVC: 2
Q125B141: RNCC: 5 | RNVC: 9
KB224: RNCC: 5 | RNVC: 9
125B141: RNCC: 5 | RNVC: 9

13 Sep 1984

5110-00-529-3662
Firmer Gouge

005293662
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY2CL1STB: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-01-023-0332
Hand File

010230332
14992: RNCC: 3 | RNVC: 1
A-A-2321: RNCC: 5 | RNVC: 9
GGG-F-325 TY18CL4: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
14992: RNCC: 5 | RNVC: 9

9 Jun 1976

5110-01-593-1821
Straight Trimmers Shears

015931821
HCS2036-01-053R: RNCC: 3 | RNVC: 2

4 Apr 2011

5110-00-978-2204
Hand Reamer

009782204
64822: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-00-978-2200
Reamer

009782200
64813: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-00-426-9664
Drum Deheader Cutter

004269664
5110-00-426-9664: RNCC: 3 | RNVC: 2
DDH: RNCC: 3 | RNVC: 2
JDD100-2: RNCC: 5 | RNVC: 9

4 May 1974

5110-01-588-4366
Hand Optical Fiber Cleaving Tool

015884366
FBC-001: RNCC: 3 | RNVC: 9

17 Sep 2010

5110-01-250-0468
Wire Stripper Blade Set

012500468
L-4421: RNCC: 3 | RNVC: 2

24 Feb 1987

5110-01-585-9081
Exposed Blade Tube Deburring Tool

015859081
71055: RNCC: 3 | RNVC: 2
71055: RNCC: 5 | RNVC: 2

11 Jun 2010

5110-01-367-3826
Hand Wire Stripper

013673826
PWC40: RNCC: 3 | RNVC: 2

10 Nov 1992

5110-01-367-3897
File Handle

013673897
73-992200: RNCC: 3 | RNVC: 2
73-99220: RNCC: 5 | RNVC: 9

10 Nov 1992

5110-01-368-4055
Hand Cold Chisel

013684055
C-24: RNCC: 3 | RNVC: 2

1 Dec 1992

5110-01-232-0019
Wire Stripper Handle

012320019
L-9038: RNCC: 3 | RNVC: 2

7 May 1986

5110-00-473-7286
Reamer

004737286
7077863: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-473-6470
Flexible Shaft Assembly Core Swaging And Squaring Tool

004736470
T136374-104/T136374-124: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-935-4660
Wood Scraper

009354660
5110-00-935-4660: RNCC: 3 | RNVC: 2
30050G: RNCC: 5 | RNVC: 2

17 Jan 1968

5110-01-583-0969
Hand Metal Stamping Die Set

015830969
YA817: RNCC: 3 | RNVC: 2

16 Mar 2010

5110-01-582-1282
Anti-Ied Robot Scraper Attachment

015821282
DSI-500-0633: RNCC: 3 | RNVC: 2

9 Feb 2010

5110-01-584-1189
Hand Punchdown Tool

015841189
700-027: RNCC: 3 | RNVC: 2
CP-3140: RNCC: 3 | RNVC: 2

16 Apr 2010

5110-01-256-5454
Stripping Tool

012565454
S1364: RNCC: 3 | RNVC: 2

5 Jun 1987

5110-01-362-2223
Reamer

013622223
64821: RNCC: 3 | RNVC: 2

3 Aug 1992

5110-01-358-4912
Hand Leather Stamping Die Set

013584912
310080375: RNCC: 3 | RNVC: 2

14 May 1992

5110-01-597-6233
Wire Stripper Blade Set

015976233
45-2132-1: RNCC: 3 | RNVC: 2

16 Jun 2011

5110-01-145-5743
Pipe Cutter

011455743
1-A: RNCC: 3 | RNVC: 2
32810: RNCC: 3 | RNVC: 2
GGG-C-771: RNCC: 4 | RNVC: 1
GGG-C-771 TY1CL1STB: RNCC: 5 | RNVC: 1

14 Jan 1983

5110-01-355-9318
Scraper Blade

013559318
BP238: RNCC: 3 | RNVC: 2

26 Mar 1992

5110-00-449-7771
Scraper Carbon Spoo

004497771
CS1: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-473-9766
Drywall Tape Knife

014739766
6218: RNCC: 3 | RNVC: 2
6218 RED DEVIL: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-516-5596
Hand Cold Chisel

015165596
1F1160: RNCC: 3 | RNVC: 2

12 Jan 2004

5110-01-166-5162
Pipe Cutter

011665162
32880: RNCC: 3 | RNVC: 2
44-S: RNCC: 5 | RNVC: 2

13 Nov 1983

5110-01-186-7748
Wire Wrapping Tool Bit

011867748
KB22: RNCC: 3 | RNVC: 9
122X404: RNCC: 5 | RNVC: 2
117-998: RNCC: 5 | RNVC: 2
125B139: RNCC: 5 | RNVC: 9
Q125B139: RNCC: 5 | RNVC: 9
KB22: RNCC: 5 | RNVC: 9

14 Aug 1984

5110-01-437-2194
Hand Reamer

014372194
R120: RNCC: 3 | RNVC: 2

7 Oct 1996

5110-01-172-9321
Scraping Knife

011729321
CSA12C: RNCC: 3 | RNVC: 2
CSA12: RNCC: 5 | RNVC: 9
CSA12B: RNCC: 5 | RNVC: 9

28 Feb 1984

5110-01-021-0083
Chamber Brackets Reamer

010210083
PWA52896: RNCC: 3 | RNVC: 2

7 May 1976

5110-01-652-0401
Scraping Knife

016520401
284-01: RNCC: 3 | RNVC: 1

8 Feb 2016

5110-00-455-3446
Hand Reamer

004553446
TA9694-25: RNCC: 3 | RNVC: 2

16 Apr 1969

5110-01-550-2408
Smooth Plane

015502408
1-12-004: RNCC: 3 | RNVC: 2

12 Apr 2007

5110-01-434-9309
Hand File

014349309
05886: RNCC: 3 | RNVC: 9

12 Aug 1996

5110-01-434-3458
Pocket Knife

014343458
47550: RNCC: 3 | RNVC: 2
50002: RNCC: 3 | RNVC: 9
07534: RNCC: 5 | RNVC: 9

26 Jul 1996

5110-01-434-9306
End Cutting Nippers

014349306
G57PH: RNCC: 3 | RNVC: 9
G57PH: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-597-5528
Cable Stripper Blade

015975528
K-6493: RNCC: 3 | RNVC: 2

13 Jun 2011

5110-01-431-0211
Diagonal Cutting Pliers

014310211
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 11 TY1CL1: RNCC: 5 | RNVC: 1
M338G: RNCC: 5 | RNVC: 2
B107.11 TY1CL1: RNCC: 5 | RNVC: 9
B107.11: RNCC: 5 | RNVC: 9

6 May 1996

5110-01-212-1706
Hand Reamer

012121706
B-996-037: RNCC: 3 | RNVC: 2

8 Jul 1985

5110-01-006-2926
Die Assembly Ram

010062926
ZT186802-10: RNCC: 3 | RNVC: 2

15 Jul 1975

5110-01-563-1441
Craftsman's Knife

015631441
LBUK2: RNCC: 3 | RNVC: 2

2 May 2008

5110-01-437-9020
Thermal Wire Stripper

014379020
4B-HOTWEEZER: RNCC: 3 | RNVC: 2
4B-HOTWEEZER: RNCC: 5 | RNVC: 2

25 Oct 1996

5110-00-203-6745
Hand Reamer

002036745
50031BTYPEA2GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1961

5110-00-203-6748
Hand Reamer

002036748
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL3: RNCC: 5 | RNVC: 9
1100S 5/8 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-642-0853
Pocket Folding Multi-Tool

016420853
30-000399: RNCC: 3 | RNVC: 2

12 Feb 2015

5110-01-430-6564
Hand Hacksaw Blade

014306564
224HE: RNCC: 3 | RNVC: 2
KOP 011: RNCC: 5 | RNVC: 9
224HE: RNCC: 5 | RNVC: 9

2 May 1996

5110-01-431-0744
Pocket Knife

014310744
K11505: RNCC: 3 | RNVC: 2
422000063: RNCC: 5 | RNVC: 2
10334122: RNCC: 6 | RNVC: 9

7 May 1996

5110-01-231-5710
Stripping Tool

012315710
901-4: RNCC: 3 | RNVC: 2
WS-9: RNCC: 5 | RNVC: 2
WS-9: RNCC: 5 | RNVC: 2

30 Apr 1986

5110-01-661-6313
Hand File Set

016616313
61463686839: RNCC: 3 | RNVC: 2
11A7000028: RNCC: 7 | RNVC: 2

10 Mar 2017

5110-01-430-2539
Hand Collar Removal Chisel

014302539
HSC 07-6: RNCC: 3 | RNVC: 2
MM336-3: RNCC: 3 | RNVC: 2

25 Apr 1996

5110-01-429-6550
Hand File

014296550
A-A-2312: RNCC: 4 | RNVC: 1
A-A-2312 TY1: RNCC: 5 | RNVC: 1
00931311000: RNCC: 5 | RNVC: 2
31311: RNCC: 5 | RNVC: 2
21745HN: RNCC: 5 | RNVC: 2
9-31311: RNCC: 5 | RNVC: 9

15 Apr 1996

5110-01-431-0371
Metal Cutting Hand Saw

014310371
HS30-1: RNCC: 3 | RNVC: 2
HS30: RNCC: 5 | RNVC: 9

6 May 1996

5110-01-268-9625
Exposed Blade Tube Deburring Tool

012689625
6768: RNCC: 3 | RNVC: 2

10 Dec 1987

5110-00-186-4194
Hand Reamer

001864194
B94.2: RNCC: 3 | RNVC: 1
1636: RNCC: 5 | RNVC: 1
21496: RNCC: 5 | RNVC: 2
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY5CL1STAGRA: RNCC: 5 | RNVC: 9
21496: RNCC: 5 | RNVC: 9
1636: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-6714
Hand Reamer

001866714
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
103HS 34/64 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-6720
Hand Reamer

001866720
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
103HS 41/64 IN.: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-188-0741
Hand Reamer

001880741
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
102CS 1-3/16 IN.: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-193-8616
Hot Line Stick Adapter

001938616
M4455-23: RNCC: 3 | RNVC: 9

9 Mar 1970

5110-00-188-0738
Hand Reamer

001880738
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
102CS 1-3/32: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-190-0972
Gasket Cu Blade Set

001900972
K2: RNCC: 3 | RNVC: 9

1 Jan 1961

5110-00-186-8169
Paring Chisel

001868169
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 44 TY2: RNCC: 5 | RNVC: 1
32-5: RNCC: 5 | RNVC: 2
828-C3205: RNCC: 5 | RNVC: 2
046302: RNCC: 5 | RNVC: 2
B107.44 TY2: RNCC: 5 | RNVC: 9
GGG-C-311 TY1CL8STA: RNCC: 5 | RNVC: 9
GGG-C-311: RNCC: 5 | RNVC: 9
32-5: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-188-0743
Hand Reamer

001880743
B94.2: RNCC: 3 | RNVC: 1
A-A-2928: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRB: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
102CS 1-1/4 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-061-1827
Hand Wire Stripper

010611827
NN054: RNCC: 3 | RNVC: 2
NO-NIK: RNCC: 5 | RNVC: 1
NN054: RNCC: 5 | RNVC: 9
NO-NIK: RNCC: 5 | RNVC: 9

14 Jun 1978

5110-01-655-6310
Diagonal Cutting Pliers

016556310
E710BCGCT: RNCC: 3 | RNVC: 2
E710BCGCT: RNCC: 5 | RNVC: 9

3 Jun 2016

5110-01-654-6133
Multi-Tool Adapter Kit

016546133
45200: RNCC: 3 | RNVC: 2

3 May 2016

5110-01-649-8970
Pliers

016498970
HCP3KT: RNCC: 3 | RNVC: 2

13 Nov 2015

5110-01-649-6556
Hand Reamer

016496556
M-26: RNCC: 3 | RNVC: 2
ZHVY0397-7: RNCC: 5 | RNVC: 2
ZLW0303-7: RNCC: 5 | RNVC: 2

5 Nov 2015

5110-01-408-9954
Wire Stripper Blade Set

014089954
45-1195-1: RNCC: 3 | RNVC: 2

2 Mar 1995

5110-00-005-8057
Deburring Reamer

000058057
D9851-03: RNCC: 3 | RNVC: 2
D9851-3: RNCC: 5 | RNVC: 9

19 Jun 1972

5110-01-084-9588
Hand Wire Stripper

010849588
NN044: RNCC: 3 | RNVC: 2
NO-NIK: RNCC: 5 | RNVC: 1
NO-NIK: RNCC: 5 | RNVC: 9
NN044: RNCC: 5 | RNVC: 9

27 Oct 1979

5110-01-406-6877
Hand Operated Wire Rope Cutter

014066877
8690TN: RNCC: 3 | RNVC: 2
8690TN: RNCC: 5 | RNVC: 9

10 Jan 1995

5110-01-408-0095
Knife Blade

014080095
0-11-411: RNCC: 3 | RNVC: 2
07617411411 9: RNCC: 5 | RNVC: 9

8 Feb 1995

5110-01-216-9696
Cable Stripper Blade

012169696
45-1927-1: RNCC: 3 | RNVC: 2
114526-H35/30-/MOD: RNCC: 5 | RNVC: 2
114526-H35/30-/MOD: RNCC: 5 | RNVC: 9

20 Sep 1985

5110-01-118-6285
Tube Cutter

011186285
D12532-001: RNCC: 3 | RNVC: 2
202985: RNCC: 5 | RNVC: 2

7 Sep 1981

5110-01-081-5154
Wear Pin Cutter

010815154
2560638: RNCC: 3 | RNVC: 2

15 Aug 1979

5110-01-113-6668
Wire Stripper Blade

011136668
L-4994: RNCC: 3 | RNVC: 2

31 May 1981

5110-01-079-2834
Dimpling Punch

010792834
ZT1867-10: RNCC: 3 | RNVC: 2

30 Jun 1979

5110-00-006-4542
Tube Cutter Cutting Wheel

000064542
D9852-214: RNCC: 3 | RNVC: 9

16 Jul 1972

5110-01-105-9761
Hand File Set

011059761
14-317: RNCC: 3 | RNVC: 2
AA14B317: RNCC: 5 | RNVC: 9
14B317: RNCC: 5 | RNVC: 9

9 Jan 1981

5110-01-642-0150
Fan-Out Fibre Handler

016420150
HAN-UNI: RNCC: 3 | RNVC: 2
HAN-UNI: RNCC: 5 | RNVC: 2

10 Feb 2015

5110-01-381-6327
Hand Optical Fiber Stripper

013816327
A3102735: RNCC: 3 | RNVC: 2
105 514 764: RNCC: 5 | RNVC: 2

20 Oct 1993

5110-01-203-7185
Scraper Blade

012037185
S-27S: RNCC: 3 | RNVC: 2
S-27S: RNCC: 5 | RNVC: 9

17 Mar 1985

5110-01-380-3467
Paper Cutter

013803467
32270004900: RNCC: 3 | RNVC: 2
5019287-026: RNCC: 5 | RNVC: 2

17 Sep 1993

5110-01-377-2312
Hand Wire Stripper

013772312
45-1501: RNCC: 3 | RNVC: 2
45-1501: RNCC: 3 | RNVC: 2
45-1501: RNCC: 5 | RNVC: 2
45-1501: RNCC: 5 | RNVC: 2

9 Jul 1993

5110-00-540-5782
Hand File

005405782
A-A-2307: RNCC: 4 | RNVC: 1
00187: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY1CL2: RNCC: 5 | RNVC: 9
00187: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-540-5802
Hand File

005405802
A-A-2437: RNCC: 4 | RNVC: 1
40592: RNCC: 5 | RNVC: 2
GGG-F-331 TY13CL2: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
40592: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-633-4769
Pliers

016334769
BDG91645CP: RNCC: 3 | RNVC: 2

24 Nov 2014

5110-01-372-7495
Circle Cutter

013727495
3300965-5201: RNCC: 3 | RNVC: 2

17 Mar 1993

5110-01-247-3784
Hand File

012473784
11294: RNCC: 3 | RNVC: 2
11294: RNCC: 5 | RNVC: 2
P112320: RNCC: 5 | RNVC: 2

6 Jan 1987

5110-01-359-2115
Finger Grip Hand Saw

013592115
POCKET CHAINSAW: RNCC: 3 | RNVC: 2
PS103: RNCC: 3 | RNVC: 2
SC103: RNCC: 5 | RNVC: 9

1 Jun 1992

5110-01-225-2808
Diagonal Cutting Pliers

012252808
722698-233: RNCC: 3 | RNVC: 2

31 Jan 1986

5110-01-093-5415
Tube Cutter Cutting Wheel

010935415
TC123A1: RNCC: 3 | RNVC: 2

19 Apr 1980

5110-01-626-1433
Pocket Folding Multi-Tool

016261433
830962: RNCC: 3 | RNVC: 2

27 Feb 2014

5110-01-330-0055
Move Shears

013300055
HMT7-223TC: RNCC: 3 | RNVC: 2

28 Nov 1990

5110-01-266-1961
Hand Reamer

012661961
SPT15-74D110174-5001TD: RNCC: 3 | RNVC: 2
TF02143-1: RNCC: 5 | RNVC: 2

22 Oct 1987

5110-01-621-5254
Knife Blade

016215254
5110-00-NIB-0059: RNCC: 3 | RNVC: 2
510008801N: RNCC: 3 | RNVC: 2

10 Sep 2013

5110-00-516-3813
Bent Trimmers Shears

005163813
20LH: RNCC: 3 | RNVC: 2
00070023: RNCC: 5 | RNVC: 2
20LH: RNCC: 5 | RNVC: 2
GGG-S-278 TY1CL2: RNCC: 5 | RNVC: 9
GGG-S-278: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-084-9587
Hand Wire Stripper

010849587
NN037: RNCC: 3 | RNVC: 2
NO-NIK: RNCC: 5 | RNVC: 1
NN037: RNCC: 5 | RNVC: 9
NO-NIK: RNCC: 5 | RNVC: 9

27 Oct 1979

5110-01-355-8508
Folding Saw

013558508
TFS6: RNCC: 3 | RNVC: 2

25 Mar 1992

5110-01-351-9066
File Handle

013519066
10201: RNCC: 3 | RNVC: 2
4322A1: RNCC: 5 | RNVC: 2
445-T1: RNCC: 5 | RNVC: 2

17 Jan 1992

5110-01-178-6864
Silversmiths Riffler Set

011786864
84-76450: RNCC: 3 | RNVC: 9

9 May 1984

5110-01-081-6436
Diagonal Cutting Pliers

010816436
209HANDNIPPER: RNCC: 3 | RNVC: 2
209: RNCC: 5 | RNVC: 9

17 Aug 1979

5110-01-617-0535
Hand Cable Stripper

016170535
45-639: RNCC: 3 | RNVC: 2

8 Mar 2013

5110-01-617-8334
Hand Cable Stripper

016178334
04624: RNCC: 3 | RNVC: 2

4 Apr 2013

5110-01-613-6902
Automotive Trim Fastener Remover Set

016136902
ASG103BR: RNCC: 3 | RNVC: 2

14 Nov 2012

5110-01-314-1814
Diagonal Cutting Pliers

013141814
B107.500: RNCC: 3 | RNVC: 1
B107.11: RNCC: 5 | RNVC: 1
B107.11 TY1CL1STA: RNCC: 5 | RNVC: 1
GGG-P-468 TY1CL1: RNCC: 5 | RNVC: 9
GGG-P-468: RNCC: 5 | RNVC: 9

24 Jan 1990

5110-01-612-4651
Hand Metal Cutting Shears

016124651
0700-3321: RNCC: 3 | RNVC: 2

11 Oct 2012

5110-01-473-9465
Pliers

014739465
B107.500: RNCC: 3 | RNVC: 1
369: RNCC: 3 | RNVC: 2
B107.500 CAT 20 TY1CL2: RNCC: 5 | RNVC: 1
369 CHANNELLOCK: RNCC: 5 | RNVC: 2
B107.20 TY1CL2: RNCC: 5 | RNVC: 9

19 Apr 2000

5110-01-470-8511
Fiber Optic Die Set

014708511
492622-1: RNCC: 3 | RNVC: 2

12 Jan 2000

5110-01-567-1626
Craftsman's Knife

015671626
X3205: RNCC: 3 | RNVC: 2
X3205: RNCC: 5 | RNVC: 9
X3205: RNCC: 5 | RNVC: 9

18 Sep 2008

5110-00-555-8661
Jeweler's Saw Blade

005558661
GGG-B-471: RNCC: 4 | RNVC: 1
GGG-B-471 TY2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-878-6480
Diagonal Cutting Pliers

008786480
E709: RNCC: 3 | RNVC: 2
E709CG: RNCC: 5 | RNVC: 2
E709ACG: RNCC: 5 | RNVC: 2

15 Sep 1967

5110-01-563-9768
Hand Reamer

015639768
SA7132762: RNCC: 3 | RNVC: 9
SA7132762: RNCC: 5 | RNVC: 2

30 May 2008

5110-00-490-3881
Die-Dimpling Female

004903881
40B3907-14: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-462-9762
Exposed Blade Tube Deburring Tool

014629762
BK1012: RNCC: 3 | RNVC: 2
S101TIN: RNCC: 5 | RNVC: 2

26 Feb 1999

5110-00-540-2129
Hand Reamer

005402129
J-8814: RNCC: 3 | RNVC: 9
129-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-206-5772
Craftsman's Knife

012065772
10-009: RNCC: 3 | RNVC: 9
10-009: RNCC: 5 | RNVC: 9
09: RNCC: 5 | RNVC: 9
3816A11: RNCC: 5 | RNVC: 9

19 Apr 1985

5110-01-458-4476
Hand Operated Wire Rope Cutter

014584476
S-40B: RNCC: 3 | RNVC: 2

26 Aug 1998

5110-01-456-7797
Knife Blade

014567797
YA405-3: RNCC: 3 | RNVC: 2

25 Jun 1998

5110-00-529-5297
Firmer Gouge

005295297
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY2CL1STA: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-01-192-3838
Metal Cutting Hand Saw

011923838
HS12: RNCC: 3 | RNVC: 2

20 Oct 1984

5110-01-501-6716
Punch And Chisel Holder

015016716
6524A2: RNCC: 3 | RNVC: 2

9 Oct 2002

5110-01-004-5963
Die Assembly Ram

010045963
ZT185302-3-32: RNCC: 3 | RNVC: 2

10 Jun 1975

5110-00-480-0981
Pipe Cutter Cutting Wheel

004800981
F299S: RNCC: 3 | RNVC: 2
3-4HD: RNCC: 5 | RNVC: 2

12 Jun 1974

5110-01-444-3505
Fiber Stripping Tool

014443505
TBS900: RNCC: 3 | RNVC: 2

5 May 1997

5110-00-473-7518
Scraper Valve Seat

004737518
7747: RNCC: 3 | RNVC: 2
7747: RNCC: 5 | RNVC: 2
7077225: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-720-1315
Rigid Handle Machete

007201315
21-100: RNCC: 3 | RNVC: 2
GGG-M-0045: RNCC: 5 | RNVC: 9
C-14-806: RNCC: 5 | RNVC: 9
GGG-M-0045 CL1SZ1: RNCC: 5 | RNVC: 9
896: RNCC: 5 | RNVC: 9
C-15: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-538-2355
Plane Cutter Bit

015382355
37056-1000: RNCC: 3 | RNVC: 2

15 Mar 2006

5110-01-492-9439
Hand Reamer

014929439
12C2457: RNCC: 3 | RNVC: 2

17 Dec 2001

5110-01-492-8371
Hand Reamer

014928371
C15481-2460: RNCC: 3 | RNVC: 2

13 Dec 2001

5110-01-020-4563
Tube Cutter

010204563
127-FA: RNCC: 3 | RNVC: 9

30 Apr 1976

5110-01-112-8355
Hand Reamer

011128355
254: RNCC: 3 | RNVC: 2

11 May 1981

5110-01-536-2361
Hand Wire Stripper

015362361
B107.500: RNCC: 3 | RNVC: 1
45-418: RNCC: 3 | RNVC: 2
B107.500 CAT 37 TY2CL1: RNCC: 5 | RNVC: 1
45-418: RNCC: 5 | RNVC: 2
A113905 ITEM 14: RNCC: 5 | RNVC: 9
A113905 ITEM 14: RNCC: C | RNVC: 1

23 Dec 2005

5110-01-004-5955
Die Assembly Ram

010045955
ZT175202-3-16: RNCC: 3 | RNVC: 2

10 Jun 1975

5110-01-533-5808
Dimpling Die

015335808
AT254G-1: RNCC: 3 | RNVC: 2
AT254G-1: RNCC: 3 | RNVC: 9

20 Sep 2005

5110-01-394-7647
Replacement Blade

013947647
08012901: RNCC: 3 | RNVC: 9

15 Aug 1994

5110-01-395-5747
Diagonal Cutting Pliers

013955747
437G: RNCC: 3 | RNVC: 2

31 Aug 1994

5110-00-720-2674
Double Bow Cutting Punch

007202674
GGG-P-833: RNCC: 4 | RNVC: 1
GGG-P-833 TY1CLBST1SZ24: RNCC: 5 | RNVC: 1
149-2-1/4: RNCC: 5 | RNVC: 2
3427A39: RNCC: 5 | RNVC: 2
01076: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-449-7318
Gasket Cutting Punch

004497318
5110-00-449-7318: RNCC: 3 | RNVC: 2
FRS PGH8-6: RNCC: 3 | RNVC: 2
745: RNCC: 5 | RNVC: 2
PGH8-6: RNCC: 5 | RNVC: 9
HP16: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-430-6316
Hand Hacksaw Blade

014306316
218HE: RNCC: 3 | RNVC: 2
KOP 095: RNCC: 5 | RNVC: 9
218HE: RNCC: 5 | RNVC: 9

2 May 1996

5110-01-429-7377
Hand Wire Stripper

014297377
PWC42: RNCC: 3 | RNVC: 2

17 Apr 1996

5110-01-430-2540
Hand Collar Removal Chisel

014302540
HSC 07-4: RNCC: 3 | RNVC: 2

25 Apr 1996

5110-01-431-1981
End Cutting Nippers

014311981
M356G: RNCC: 3 | RNVC: 2

8 May 1996

5110-01-430-5205
Diagonal Cutting Pliers

014305205
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 11 TY1CL1: RNCC: 5 | RNVC: 1
05933813: RNCC: 5 | RNVC: 2
742-7C: RNCC: 5 | RNVC: 2
B107.11: RNCC: 5 | RNVC: 9
B107.11 TY1CL1: RNCC: 5 | RNVC: 9
B107.11 TY1CL1STA: RNCC: 5 | RNVC: 9
742-7C: RNCC: 5 | RNVC: 9

30 Apr 1996

5110-01-431-0307
Hand Metal Cutting Shears

014310307
B107.500: RNCC: 3 | RNVC: 1
TS3: RNCC: 3 | RNVC: 2
B107.500 CAT 16 TY2CL1STA: RNCC: 5 | RNVC: 1

6 May 1996

5110-01-428-5222
Craftsman's Knife

014285222
10-299: RNCC: 3 | RNVC: 2
07575305: RNCC: 5 | RNVC: 2
5C947: RNCC: 5 | RNVC: 2
10-299: RNCC: 5 | RNVC: 2

27 Mar 1996

5110-01-385-7478
Pocket Knife

013857478
3120: RNCC: 3 | RNVC: 2
BLACK GULCH: RNCC: 5 | RNVC: 2
3320: RNCC: 5 | RNVC: 9
BLACK GULCH II: RNCC: 5 | RNVC: 9

18 Jan 1994

5110-00-640-5422
Firmer Chisel

006405422
PD5110-00-449-6907: RNCC: 3 | RNVC: 1
301: RNCC: 5 | RNVC: 2
PVC14: RNCC: 5 | RNVC: 2
GGG-C-311 TY1CL4STA OR C: RNCC: 5 | RNVC: 9
GGG-C-311: RNCC: 5 | RNVC: 9
301: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-059-9170
Dimpling Die

010599170
PWA53898: RNCC: 3 | RNVC: 2

3 May 1978

5110-01-448-4781
Hand Metal Stamping Die

014484781
S7920: RNCC: 3 | RNVC: 2

29 Aug 1997

5110-01-579-5946
Sealant Scraper

015795946
NYZ700510: RNCC: 3 | RNVC: 2

18 Nov 2009

5110-01-272-3849
Hand Operated Wire Rope Cutter

012723849
WMC-1250: RNCC: 3 | RNVC: 9
WMC-1250: RNCC: 5 | RNVC: 2

8 Feb 1988

5110-01-576-4061
Ice Climbing Tool

015764061
412077: RNCC: 3 | RNVC: 2

30 Jul 2009

5110-01-578-5370
Bolt Cutter

015785370
0390MC: RNCC: 3 | RNVC: 2
2H023: RNCC: 5 | RNVC: 2
0390MC: RNCC: 5 | RNVC: 9

9 Oct 2009

5110-01-278-5217
Hand Metal Cutting Shears

012785217
B107.16M: RNCC: 3 | RNVC: 1
B107.16M TY2CL2: RNCC: 5 | RNVC: 1
786: RNCC: 5 | RNVC: 2

6 May 1988

5110-01-278-5218
Hand Metal Cutting Shears

012785218
B107.16M: RNCC: 3 | RNVC: 1
B107.16M TY2CL3: RNCC: 5 | RNVC: 1
787: RNCC: 5 | RNVC: 2

6 May 1988

5110-00-671-8115
Handled Riffler Set

006718115
B2117: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-575-9194
Drill Reamer

015759194
3854AS400-13: RNCC: 3 | RNVC: 2
3854AS400-13: RNCC: 5 | RNVC: 2
3854AS400-13: RNCC: 5 | RNVC: 2
3854AS400-13: RNCC: 5 | RNVC: 2
3854AS400-13: RNCC: 5 | RNVC: 2
3854AS400-13: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9169
Piloted Reamer

015759169
3854AS300-8: RNCC: 3 | RNVC: 2
3854AS300-8: RNCC: 5 | RNVC: 2
3854AS300-8: RNCC: 5 | RNVC: 2
3854AS300-8: RNCC: 5 | RNVC: 2
3854AS300-8: RNCC: 5 | RNVC: 2
3854AS300-8: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9109
Piloted Reamer

015759109
3854AS300-3: RNCC: 3 | RNVC: 2
3854AS300-3: RNCC: 5 | RNVC: 2
3854AS300-3: RNCC: 5 | RNVC: 2
3854AS300-3: RNCC: 5 | RNVC: 2
3854AS300-3: RNCC: 5 | RNVC: 2
3854AS300-3: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9173
Piloted Reamer

015759173
3854AS300-9: RNCC: 3 | RNVC: 2
3854AS300-9: RNCC: 5 | RNVC: 2
3854AS300-9: RNCC: 5 | RNVC: 2
3854AS300-9: RNCC: 5 | RNVC: 2
3854AS300-9: RNCC: 5 | RNVC: 2
3854AS300-9: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-574-4316
Diagonal Cutting Pliers

015744316
55NCGBK: RNCC: 3 | RNVC: 2
272PL550: RNCC: 5 | RNVC: 2
55NCGBK: RNCC: 5 | RNVC: 9

28 May 2009

5110-00-630-4421
Shear

006304421
7900677700: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-935-0899
Hand Belt Cutter

009350899
300348: RNCC: 3 | RNVC: 2

23 May 1967

5110-00-233-9690
Hand File

002339690
A-A-2432: RNCC: 4 | RNVC: 1
84-25800: RNCC: 5 | RNVC: 2
40222: RNCC: 5 | RNVC: 2
GGG-F-331 TY11CL1: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
40222: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-242-8807
Hand Operated Wire Rope Cutter

002428807
M0DEL1: RNCC: 3 | RNVC: 2
1: RNCC: 3 | RNVC: 2
A-A-3029: RNCC: 4 | RNVC: 1
A-A-3029 SZ1: RNCC: 5 | RNVC: 1
GGG-C-800 TY3SZ1: RNCC: 5 | RNVC: 9
GGG-C-800: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-760-1036
Hand Reamer

007601036
926189: RNCC: 3 | RNVC: 2

1 Jan 1960

5110-00-992-4701
Hand Cable Stripper

009924701
TL-688/B: RNCC: 3 | RNVC: 2
RE-C-101760: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-01-372-9132
Inclosed Blade Tube Deburring Tool

013729132
D9850: RNCC: 3 | RNVC: 2

23 Mar 1993

5110-00-224-3843
Hand Reamer

002243843
50031BTYPEA1GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-224-3866
Hand Reamer

002243866
50031BTYPEA1GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-224-8733
Hand Reamer

002248733
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY2CL1: RNCC: 5 | RNVC: 9
100 23/64 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-289-6595
Hand Reamer

012896595
AFT74R330003-T9: RNCC: 3 | RNVC: 2

28 Nov 1988

5110-00-191-6492
Knife Blade

001916492
201-1010: RNCC: 3 | RNVC: 2
1135: RNCC: 5 | RNVC: 9

10 Dec 1971

5110-01-558-9776
Metal Shipping And Storage Drum Cutter

015589776
D-HEAD-1: RNCC: 3 | RNVC: 2

30 Nov 2007

5110-01-286-4069
Tube Cutter

012864069
152: RNCC: 3 | RNVC: 2

1 Oct 1988

5110-01-288-3472
Knockout Punch And Die

012883472
ZT2978-5-32: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-288-3455
Knockout Punch And Die

012883455
ZT1877-1-8: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-396-7688
Hand Wire Stripper

013967688
ST-100-2426: RNCC: 3 | RNVC: 9
118-052: RNCC: 5 | RNVC: 2
05664-00109: RNCC: 5 | RNVC: 2
ST-100-26: RNCC: 5 | RNVC: 2
05664-00109: RNCC: 5 | RNVC: 9
ST-100-26: RNCC: 5 | RNVC: 9

23 Sep 1994

5110-01-554-7101
Hand Wire Stripper

015547101
45-2132: RNCC: 3 | RNVC: 2

17 Aug 2007

5110-00-767-5541
Oversize Dow Reamer

007675541
WT17807: RNCC: 3 | RNVC: 2
T17807: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-00-768-3797
Hand Wire Stripper

007683797
45-181: RNCC: 3 | RNVC: 2

1 Jan 1960

5110-01-553-8604
Special Purpose Vehicular Tool Kit

015538604
PKHD53: RNCC: 3 | RNVC: 2

26 Jul 2007

5110-01-282-9432
Panel Cutter

012829432
3109: RNCC: 3 | RNVC: 2
AJAX3109: RNCC: 3 | RNVC: 2

26 Jul 1988

5110-01-233-4089
Bent Trimmers Shears

012334089
3778-T: RNCC: 3 | RNVC: 2
58136: RNCC: 5 | RNVC: 2
58136: RNCC: 5 | RNVC: 9
3778-T: RNCC: 5 | RNVC: 9

30 May 1986

5110-01-389-9409
Wire Stripper Blade

013899409
990341: RNCC: 3 | RNVC: 2

7 May 1994

5110-01-389-0901
Pocket Knife

013890901
KER1060A: RNCC: 3 | RNVC: 2
1060ACT: RNCC: 3 | RNVC: 2
KER1060A: RNCC: 5 | RNVC: 2
BLACK HORSE II: RNCC: 5 | RNVC: 2
1060A: RNCC: 5 | RNVC: 9

15 Apr 1994

5110-01-456-9059
Diagonal Cutting Pliers

014569059
INPDC6: RNCC: 3 | RNVC: 2

30 Jun 1998

5110-01-459-2662
Slide Adjustment Tool

014592662
90-800-57: RNCC: 3 | RNVC: 2

25 Sep 1998

5110-00-757-9442
Form An Cutoff Tool

007579442
6806230: RNCC: 3 | RNVC: 2
6806230: RNCC: 5 | RNVC: 9

28 Feb 1968

5110-01-313-0197
Ice Ax

013130197
B107.400: RNCC: 3 | RNVC: 1
410151: RNCC: 3 | RNVC: 2
B107.42: RNCC: 5 | RNVC: 1
B107.42 TY2: RNCC: 5 | RNVC: 1
A-A-50116: RNCC: 5 | RNVC: 9

29 Dec 1989

5110-01-314-8307
Glow Plug Hole Cleaning Tool

013148307
MT150: RNCC: 3 | RNVC: 9

6 Feb 1990

5110-00-490-3884
Die-Dimpling Female

004903884
33D902-1: RNCC: 3 | RNVC: 2

1 Jan 1961

5110-01-004-5967
Die Assembly Ram

010045967
ZT187802-3-16: RNCC: 3 | RNVC: 2

10 Jun 1975

5110-01-543-1957
Bearing Removal Tool Cutter

015431957
RKC4103-6CUT: RNCC: 3 | RNVC: 2

31 Aug 2006

5110-01-545-1444
Deburring Tool Blade Holder

015451444
05751128: RNCC: 3 | RNVC: 2
3LC: RNCC: 5 | RNVC: 2
C HOLDER: RNCC: 5 | RNVC: 2
3LC: RNCC: 5 | RNVC: 9
C HOLDER: RNCC: 5 | RNVC: 9

2 Nov 2006

5110-01-446-6153
Hand Wire Stripper

014466153
5011 DK26: RNCC: 3 | RNVC: 2

10 Jul 1997

5110-01-305-6575
Dimpling Die

013056575
ZT2992-3/4: RNCC: 3 | RNVC: 2

9 Aug 1989

5110-01-539-9826
Hand Wire Cutter

015399826
22-01511: RNCC: 3 | RNVC: 2

4 May 2006

5110-01-543-1953
Bearing Removal Cutter Tool

015431953
RKC4101-9: RNCC: 3 | RNVC: 2

31 Aug 2006

5110-01-537-8547
Hand Reamer

015378547
TLSRC-8-1: RNCC: 3 | RNVC: 2

28 Feb 2006

5110-00-978-2199
Reamer

009782199
64812: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-01-435-0006
Hand File

014350006
11716: RNCC: 3 | RNVC: 2
11716: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-067-6206
Tube Cutter

010676206
103: RNCC: 3 | RNVC: 2

4 Nov 1978

5110-01-295-7799
Cylinder Ridge Reamer

012957799
PWA70316: RNCC: 3 | RNVC: 2

11 Mar 1989

5110-01-437-2197
Hand Reamer

014372197
R121: RNCC: 3 | RNVC: 2

7 Oct 1996

5110-00-808-6074
Microminiature Chisel Tip

008086074
MT C-200: RNCC: 3 | RNVC: 9
MT5S4: RNCC: 5 | RNVC: 9
MT C-200: RNCC: C | RNVC: 1

26 Apr 1968

5110-01-360-4565
Hand Reamer

013604565
4090325-60: RNCC: 3 | RNVC: 2
4090325-60: RNCC: 3 | RNVC: 9

24 Jun 1992

5110-01-434-9311
Hand File

014349311
A-A-2313: RNCC: 4 | RNVC: 1
05968: RNCC: 5 | RNVC: 1
05968: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-00-449-7383
Hand Reamer Set

004497383
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
RS-JR: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-434-9601
Hand File

014349601
04927: RNCC: 3 | RNVC: 1
04927: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-7704
Hand Cold Chisel

014347704
108: RNCC: 3 | RNVC: 2
108: RNCC: 5 | RNVC: 9

6 Aug 1996

5110-01-434-9914
Hand Wire Stripper-Crimper

014349914
104CG: RNCC: 3 | RNVC: 2
104CG: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-235-5788
End Cutting Nippers

012355788
B107.500: RNCC: 3 | RNVC: 1
5110-01-235-5788: RNCC: 3 | RNVC: 2
B107.500 CAT 11 TY2CL3: RNCC: 5 | RNVC: 1
3732A23: RNCC: 5 | RNVC: 2
GGG-N-350: RNCC: 5 | RNVC: 9
B107.11: RNCC: 5 | RNVC: 9
B107.11 TY2CL3: RNCC: 5 | RNVC: 9
GGG-N-350 TY1CL1STB: RNCC: 5 | RNVC: 9

3 Jul 1986

5110-01-360-5211
Hand File

013605211
GS18201-1: RNCC: 3 | RNVC: 2

25 Jun 1992

5110-01-301-2745
Cutting Punchpliers

013012745
WHITNEY JUNIOR NO5: RNCC: 3 | RNVC: 2

26 May 1989

5110-01-357-9935
Pliers

013579935
720: RNCC: 3 | RNVC: 2

6 May 1992

5110-01-355-9316
Scraper Blade

013559316
BP175: RNCC: 3 | RNVC: 2

26 Mar 1992

5110-01-354-6941
Dimpling Die

013546941
TP4266: RNCC: 3 | RNVC: 2

4 Mar 1992

5110-01-354-8450
Hand Wire Stripper

013548450
206-101: RNCC: 3 | RNVC: 9

6 Mar 1992

5110-01-351-9067
File Handle

013519067
10202: RNCC: 3 | RNVC: 2
4322A2: RNCC: 5 | RNVC: 2
445-T2: RNCC: 5 | RNVC: 2

17 Jan 1992

5110-01-330-1433
Hand Wire Stripper

013301433
1542-2-CL-1: RNCC: 3 | RNVC: 2

29 Nov 1990

5110-01-335-1371
Scraping Knife

013351371
PK33: RNCC: 3 | RNVC: 2

6 Mar 1991

5110-01-330-0913
Electronic Shears

013300913
97CG: RNCC: 3 | RNVC: 2
97CG: RNCC: 5 | RNVC: 9

29 Nov 1990

5110-01-330-1434
Hand Wire Stripper

013301434
1700: RNCC: 3 | RNVC: 2

29 Nov 1990

5110-01-322-5549
Deburring Footpiece

013225549
ZT339014: RNCC: 3 | RNVC: 2

9 Jul 1990

5110-01-069-5945
Scraper Blade

010695945
HS8693: RNCC: 3 | RNVC: 2

20 Dec 1978

5110-01-077-8864
Dimpling Die

010778864
ZT1878-5-16: RNCC: 3 | RNVC: 2

1 Jun 1979

5110-01-077-8862
Dimpling Punch

010778862
ZT1751-1/8: RNCC: 3 | RNVC: 2

1 Jun 1979

5110-01-349-4825
File Handle

013494825
GA614: RNCC: 3 | RNVC: 2

26 Nov 1991

5110-01-349-4826
File Handle

013494826
GA615: RNCC: 3 | RNVC: 2

26 Nov 1991

5110-01-351-9069
File Handle

013519069
10204: RNCC: 3 | RNVC: 2
4322A4: RNCC: 5 | RNVC: 2
445-T4: RNCC: 5 | RNVC: 2

17 Jan 1992

5110-00-555-1812
Hand File

005551812
A-A-2441: RNCC: 4 | RNVC: 1
41624: RNCC: 5 | RNVC: 2
GGG-F-331 TY17: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
41624: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-555-1807
Hand File

005551807
A-A-2435: RNCC: 4 | RNVC: 1
40506: RNCC: 5 | RNVC: 2
GGG-F-331 TY12: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
40506: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-250-0469
Cable Cutter Blade

012500469
L-7486: RNCC: 3 | RNVC: 2

24 Feb 1987

5110-00-561-2531
Gasket Cutter Blade Set

005612531
B176: RNCC: 3 | RNVC: 2

14 Nov 1974

5110-01-186-7750
Wire Wrapping Tool Sleeve

011867750
125B159: RNCC: 3 | RNVC: 2
Q125B159: RNCC: 5 | RNVC: 9

14 Aug 1984

5110-01-243-5379
Hand Reamer

012435379
000 589 10 53 00: RNCC: 3 | RNVC: 2
453 7785-130: RNCC: 5 | RNVC: 2
000 589 10 53 00: RNCC: 5 | RNVC: 2
000 589 10 53 00: RNCC: 5 | RNVC: 9
453 7785-130: RNCC: 5 | RNVC: 9

28 Oct 1986

5110-00-903-2548
Hand Reamer

009032548
X2-0-34-2: RNCC: 3 | RNVC: 2

10 Feb 1967

5110-00-554-8883
Hand Rasp

005548883
A-A-2327: RNCC: 4 | RNVC: 1
GGG-F-325 TY25CL1: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-541-4963
Hand Reamer

005414963
114: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-01-341-1033
Pliers

013411033
166SEB: RNCC: 3 | RNVC: 2
91628885: RNCC: 5 | RNVC: 2
166SEB: RNCC: 5 | RNVC: 9

25 Jun 1991

5110-01-110-9902
Hand Operated Wire Rope Cutter

011109902
WC910: RNCC: 3 | RNVC: 9

8 Apr 1981

5110-01-109-9965
Hand Hacksaw Blade

011099965
F1024: RNCC: 3 | RNVC: 2

25 Mar 1981

5110-01-116-0610
Bent Trimmers Shears

011160610
S-60: RNCC: 3 | RNVC: 2
S-60: RNCC: 5 | RNVC: 9

18 Jul 1981

5110-01-076-7339
Valve Seat Reamer

010767339
69602: RNCC: 3 | RNVC: 9
69602: RNCC: C | RNVC: 1

10 May 1979

5110-01-143-0095
Termination Die Set

011430095
731380-1: RNCC: 3 | RNVC: 2

24 Nov 1982

5110-01-023-6719
Dimple Gun Punch

010236719
ZT2055-1/8: RNCC: 3 | RNVC: 2
ZT2055 1-8: RNCC: 5 | RNVC: 2

24 Jun 1976

Load More Results