What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 47 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 47of 112

5110-01-335-1579
Hand File

013351579
4MA: RNCC: 3 | RNVC: 2

6 Mar 1991

5110-01-448-4783
Socket Chuck

014484783
S7910: RNCC: 3 | RNVC: 2

29 Aug 1997

5110-01-424-2842
Hand File

014242842
GS18196-3: RNCC: 3 | RNVC: 2

25 Jan 1996

5110-01-425-2030
Hand Wire Stripper

014252030
TW-1HV: RNCC: 3 | RNVC: 2

14 Feb 1996

5110-01-231-5713
Stripping Tool

012315713
901-7: RNCC: 3 | RNVC: 2
WS-12: RNCC: 5 | RNVC: 2
WS-12: RNCC: 5 | RNVC: 2

30 Apr 1986

5110-00-892-5845
Keyhole Saw Blade

008925845
GGG-S-65: RNCC: 4 | RNVC: 1
GGG-S-65 TY8: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-01-437-1140
Craftsman's Knife

014371140
70895A65: RNCC: 3 | RNVC: 2

6 Oct 1996

5110-01-422-2484
Knockout Punch And Die

014222484
730-2-1/4: RNCC: 3 | RNVC: 2
3449A32: RNCC: 5 | RNVC: 2

27 Nov 1995

5110-01-295-9423
Dimpling Punch

012959423
ZT179202-3-4: RNCC: 3 | RNVC: 2

14 Mar 1989

5110-01-362-2224
Reamer

013622224
64839: RNCC: 3 | RNVC: 2

3 Aug 1992

5110-01-335-1422
Hand Cold Chisel

013351422
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1
PPC832B: RNCC: 5 | RNVC: 2
B107.48 TY1CL2: RNCC: 5 | RNVC: 9
PPC832A: RNCC: 5 | RNVC: 9
B107.48: RNCC: 5 | RNVC: 9
FRS PPC832B: RNCC: 5 | RNVC: 9

6 Mar 1991

5110-01-335-1426
Hand Half Round Nose Chisel

013351426
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL5: RNCC: 5 | RNVC: 1
PPC12B: RNCC: 5 | RNVC: 2
B107.48 TY1CL5: RNCC: 5 | RNVC: 9
PPC12A: RNCC: 5 | RNVC: 9
B107.48: RNCC: 5 | RNVC: 9

6 Mar 1991

5110-01-081-5224
Hand Cable Stripper

010815224
603995-1: RNCC: 3 | RNVC: 2

15 Aug 1979

5110-01-004-5959
Die Assembly Ram

010045959
ZT179202-1: RNCC: 3 | RNVC: 2

10 Jun 1975

5110-01-309-0284
Rope Cutting Gun

013090284
S6801: RNCC: 3 | RNVC: 2

11 Oct 1989

5110-01-358-3531
Hand Wire Stripper

013583531
45-2133: RNCC: 3 | RNVC: 2
45-2133: RNCC: 3 | RNVC: 2

13 May 1992

5110-01-440-6353
Power Distribution Block

014406353
11725-3: RNCC: 3 | RNVC: 2
BLOCDI001: RNCC: 5 | RNVC: 2

21 Jan 1997

5110-01-388-1521
Pocket Scissors

013881521
384: RNCC: 3 | RNVC: 2

22 Mar 1994

5110-01-354-6939
Dimpling Die

013546939
TP4264: RNCC: 3 | RNVC: 2

4 Mar 1992

5110-01-355-8496
Scraping Knife

013558496
PK22: RNCC: 3 | RNVC: 2

25 Mar 1992

5110-01-437-9029
Hand Cable Stripper

014379029
2A-HOTNIFE: RNCC: 3 | RNVC: 2
2A-HOTNIFE: RNCC: 5 | RNVC: 2
CN 201/2A: RNCC: 5 | RNVC: 2

25 Oct 1996

5110-01-289-7036
Knockout Punch And Die

012897036
ZT1748-6: RNCC: 3 | RNVC: 2

28 Nov 1988

5110-01-247-3783
Hand File

012473783
11268: RNCC: 3 | RNVC: 9
11268: RNCC: 5 | RNVC: 2

6 Jan 1987

5110-01-326-6482
Diagonal Cutting Pliers

013266482
184CCPCT: RNCC: 3 | RNVC: 2
184ACPCT: RNCC: 5 | RNVC: 9

28 Sep 1990

5110-01-327-6129
Cylinder Ridge Reamer Cutter Blade

013276129
8379037: RNCC: 3 | RNVC: 2
8379037: RNCC: 5 | RNVC: 9

17 Oct 1990

5110-01-243-5853
Outer Seal Dress. Tool

012435853
28C1207 ITMNTE-1GP: RNCC: 3 | RNVC: 1
28C1200-15: RNCC: 5 | RNVC: 1
28E1200-15: RNCC: 5 | RNVC: 1

30 Oct 1986

5110-00-832-6303
Craftsman's Knife

008326303
X3601: RNCC: 3 | RNVC: 2
1: RNCC: 5 | RNVC: 9
1: RNCC: 5 | RNVC: 9
X3601: RNCC: 5 | RNVC: 9

8 Mar 1967

5110-01-434-9472
Hand File

014349472
5110-01-434-9472: RNCC: 3 | RNVC: 2
06150N: RNCC: 5 | RNVC: 2
06150: RNCC: 5 | RNVC: 9
06150: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-351-9070
File Handle

013519070
10205: RNCC: 3 | RNVC: 2
4322A5: RNCC: 5 | RNVC: 2
445-T5: RNCC: 5 | RNVC: 2

17 Jan 1992

5110-01-343-2025
Filter Cutter Tool

013432025
4C-5084: RNCC: 3 | RNVC: 2
5P-1747: RNCC: 5 | RNVC: 9
6V-7905: RNCC: 5 | RNVC: 9

8 Aug 1991

5110-01-180-7358
Miter Box And Saw

011807358
ME25-39475-3001: RNCC: 3 | RNVC: 2

3 Jun 1984

5110-01-301-0943
Oil Filter Cutter

013010943
J29925: RNCC: 3 | RNVC: 2

25 May 1989

5110-01-367-8405
Chisel

013678405
0003-0216-000: RNCC: 3 | RNVC: 2
0003-0216-000: RNCC: 5 | RNVC: 9
0003-0216-000: RNCC: C | RNVC: 1

20 Nov 1992

5110-01-339-3077
Pliers

013393077
8142: RNCC: 3 | RNVC: 2

20 May 1991

5110-01-290-8663
Dimpling Punch

012908663
ZT3855-5/32: RNCC: 3 | RNVC: 2

17 Dec 1988

5110-00-690-8019
Die Set Flat Face M

006908019
TX1906T: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-297-2361
Hand Wire Stripper

012972361
A25460-1: RNCC: 3 | RNVC: 9
A25460-1: RNCC: 5 | RNVC: 2
A25460-1: RNCC: 5 | RNVC: 9

31 Mar 1989

5110-01-326-6165
Hand Hacksaw Blade

013266165
HCSB1232: RNCC: 3 | RNVC: 2
HSBM1232A: RNCC: 5 | RNVC: 2

27 Sep 1990

5110-01-467-8806
Hand File

014678806
07023: RNCC: 3 | RNVC: 1
07023: RNCC: 5 | RNVC: 9

17 Sep 1999

5110-01-047-6784
Rail Splicing Tool

010476784
12524001-1: RNCC: 3 | RNVC: 2
12524001-1: RNCC: 3 | RNVC: 9
12524001-1: RNCC: 5 | RNVC: 9

12 Sep 1977

5110-01-288-3454
Knockout Punch And Die

012883454
ZT1877-1-4: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-462-5646
Hand Metal Cutting Shears

014625646
HD10C-4M: RNCC: 3 | RNVC: 2
HD8L-2WC: RNCC: 5 | RNVC: 9

8 Feb 1999

5110-01-360-4566
Hand Reamer

013604566
4090325-62: RNCC: 3 | RNVC: 2
4090325-62: RNCC: 3 | RNVC: 9

24 Jun 1992

5110-01-030-6131
Pipe Cutter

010306131
2-A: RNCC: 3 | RNVC: 2
32825: RNCC: 3 | RNVC: 2
GGG-C-771: RNCC: 4 | RNVC: 1
GGG-C-771 TY1CL1STA: RNCC: 5 | RNVC: 1

9 Nov 1976

5110-01-036-6928
Hand Wire Stripper

010366928
ST-100-2830: RNCC: 3 | RNVC: 9
ST-100-30: RNCC: 5 | RNVC: 9
ST-100-28: RNCC: 5 | RNVC: 9
ST-100-30: RNCC: 5 | RNVC: 9

5 Mar 1977

5110-00-930-6367
Hand File

009306367
PD5110-00-930-6367: RNCC: 3 | RNVC: 2
A-A-2319: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY16CL2: RNCC: 5 | RNVC: 9

15 Jun 1966

5110-01-434-9332
Hand File

014349332
A-A-2318: RNCC: 4 | RNVC: 1
11936: RNCC: 5 | RNVC: 1
11936: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-354-6940
Dimpling Die

013546940
TP4265: RNCC: 3 | RNVC: 2

4 Mar 1992

5110-01-243-5381
Hand Reamer

012435381
000 589 18 53 00: RNCC: 3 | RNVC: 2
Y00018563: RNCC: 5 | RNVC: 2
000 589 18 53 00: RNCC: 5 | RNVC: 2
000 589 18 53 00: RNCC: 5 | RNVC: 9

28 Oct 1986

5110-01-288-3483
Knockout Punch And Die

012883483
ZT3867-6: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-322-5545
Die Heater

013225545
ZT1982B15: RNCC: 3 | RNVC: 2

9 Jul 1990

5110-01-488-9228
Airc Tool Set Instl

014889228
CUTA1870210C: RNCC: 3 | RNVC: 2

6 Sep 2001

5110-01-489-5989
Diagonal Cutting Pliers

014895989
MS54-9J: RNCC: 3 | RNVC: 2
294PL160: RNCC: 5 | RNVC: 2
MS54-9J: RNCC: 5 | RNVC: 9

18 Sep 2001

5110-01-009-1225
Hand File

010091225
20624: RNCC: 3 | RNVC: 2
20624: RNCC: 5 | RNVC: 9

4 Sep 1975

5110-01-373-2531
Wire Stripper Blade Set

013732531
AS5768: RNCC: 3 | RNVC: 1
45-1610-1: RNCC: 3 | RNVC: 2
AS5768/1-B20: RNCC: 5 | RNVC: 1

31 Mar 1993

5110-01-282-2742
Wire Handtool

012822742
3430-1000: RNCC: 3 | RNVC: 9
7000057719: RNCC: C | RNVC: 1

13 Jul 1988

5110-01-285-6368
Rivet Cutter

012856368
PWA57377: RNCC: 3 | RNVC: 2

17 Sep 1988

5110-01-459-2660
Clamp Pad Tool

014592660
90-800-46: RNCC: 3 | RNVC: 2
BA-12L: RNCC: 5 | RNVC: 2

25 Sep 1998

5110-00-690-7840
Hand Metal Stamping Die Set

006907840
SNX: RNCC: 3 | RNVC: 9
SNX: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-01-300-5527
Diagonal Cutting Pliers

013005527
E719ACG: RNCC: 3 | RNVC: 2
E719CG: RNCC: 5 | RNVC: 9

17 May 1989

5110-01-365-3962
Tube Cutter

013653962
2706A1: RNCC: 3 | RNVC: 2

6 Oct 1992

5110-01-367-3843
Diagonal Cutting Pliers

013673843
E710ACG: RNCC: 3 | RNVC: 2
0099 2672: RNCC: 5 | RNVC: 2
EP165A: RNCC: 5 | RNVC: 2
E710CG: RNCC: 5 | RNVC: 9

10 Nov 1992

5110-01-299-7833
Hand Optical Fiber Stripper

012997833
927-1103: RNCC: 3 | RNVC: 2

5 May 1989

5110-01-446-6156
Hand Wire Stripper

014466156
5011 DK14: RNCC: 3 | RNVC: 2

10 Jul 1997

5110-01-297-9433
Hatch Weldment

012979433
5598608-9: RNCC: 3 | RNVC: 2

8 Apr 1989

5110-01-473-9685
Hand Cold Chisel

014739685
B107.410: RNCC: 3 | RNVC: 1
B107.48: RNCC: 5 | RNVC: 1
B107.48 TY1CL2: RNCC: 5 | RNVC: 1
10216 MAYHEW: RNCC: 5 | RNVC: 2
10216: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-473-1357
Hand Cable Stripper

014731357
CP01229-02: RNCC: 3 | RNVC: 2
FS-1-230: RNCC: 3 | RNVC: 2
247-0029-040: RNCC: 5 | RNVC: 9

28 Mar 2000

5110-00-801-4572
Compens Pointer Set

008014572
1952-5017-1: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-01-557-1666
Blacksmith's Chisel

015571666
50002-015: RNCC: 3 | RNVC: 2

15 Oct 2007

5110-01-539-9996
Pocket Folding Multi-Tool

015399996
22-05509G1: RNCC: 3 | RNVC: 2
COMPACT SPORT (BLACK): RNCC: 5 | RNVC: 1
22-05509: RNCC: 5 | RNVC: 9

5 May 2006

5110-01-233-1847
Cable Trimmer

012331847
KTJ-24: RNCC: 3 | RNVC: 9

28 May 1986

5110-01-322-5551
Spotfacing Footpiece

013225551
ZT339031: RNCC: 3 | RNVC: 2

9 Jul 1990

5110-01-316-4378
Reciprocating Drill

013164378
100-020-093: RNCC: 3 | RNVC: 2
91637140: RNCC: 5 | RNVC: 2
00-020-093: RNCC: 5 | RNVC: 2

8 Mar 1990

5110-00-293-3029
Hand Reamer

002933029
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
84RL: RNCC: 5 | RNVC: 9
764-0840-000: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-351-9071
File Handle

013519071
10206: RNCC: 3 | RNVC: 2
4322A6: RNCC: 5 | RNVC: 2
445-T6: RNCC: 5 | RNVC: 2

17 Jan 1992

5110-01-288-3465
Knockout Punch And Die

012883465
ZT2953-5-32: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-312-1597
Hand Wire Stripper

013121597
105 194 583: RNCC: 3 | RNVC: 2
105 194 583: RNCC: 3 | RNVC: 9
105 194 583: RNCC: 5 | RNVC: 9

12 Dec 1989

5110-00-775-1697
Diagonal Cutting Pliers

007751697
11-6764: RNCC: 3 | RNVC: 2
11-6764: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-01-589-8828
Hand File

015898828
78-318100: RNCC: 3 | RNVC: 2
SIM 78-318100: RNCC: 5 | RNVC: 9

7 Nov 2010

5110-01-590-9423
Hand Optical Fiber Stripper

015909423
CFS-2: RNCC: 3 | RNVC: 2
CFS2: RNCC: 5 | RNVC: 2

4 Jan 2011

5110-01-315-5977
Tool Moil Point Rem

013155977
52-D-9146-1: RNCC: 3 | RNVC: 2
5110PL0790946: RNCC: 6 | RNVC: 9

20 Feb 1990

5110-01-348-2520
Craftsman's Knife

013482520
SSS0402CC: RNCC: 3 | RNVC: 2

7 Nov 1991

5110-00-144-5820
Governo Hand Reamer

001445820
83663: RNCC: 3 | RNVC: 2

1 Jan 1961

5110-01-579-5678
Electricians' Scissors

015795678
758IE149: RNCC: 3 | RNVC: 2
149: RNCC: 5 | RNVC: 2

17 Nov 2009

5110-01-513-0468
Oil Fi Cutting Tool

015130468
877-670: RNCC: 3 | RNVC: 9
877-670: RNCC: C | RNVC: 1

16 Sep 2003

5110-00-142-3566
Keyway Cutter

001423566
C-3600-1032: RNCC: 3 | RNVC: 2
C-3600-1032: RNCC: 5 | RNVC: 2
C-3600-1032: RNCC: 5 | RNVC: 2
47C3576: RNCC: 5 | RNVC: 9
C-3576-10: RNCC: 5 | RNVC: 9
C-3600 10-32: RNCC: 5 | RNVC: 9
C-3600-1032: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-579-0082
Electric Hot Tip Knife

015790082
SP25KNUS: RNCC: 3 | RNVC: 2
SP23LHPK: RNCC: 5 | RNVC: 9
SP23LHPK: RNCC: 5 | RNVC: 9

27 Oct 2009

5110-01-642-5813
Shear-Cutter Kit

016425813
758PL008: RNCC: 3 | RNVC: 2

3 Mar 2015

5110-01-336-5729
Bent Trimmers Shears

013365729
1225: RNCC: 3 | RNVC: 9
1225 COOPER/WISS: RNCC: 5 | RNVC: 2
1225: RNCC: C | RNVC: 1

27 Mar 1991

5110-00-942-6898
Fastener Collar Cutter

009426898
105-6: RNCC: 3 | RNVC: 2
105-6: RNCC: 5 | RNVC: 2
105-6: RNCC: 5 | RNVC: 9

12 Dec 1965

5110-01-335-9866
Knife Blade

013359866
12-WB: RNCC: 3 | RNVC: 2

19 Mar 1991

5110-01-336-4373
Dimpling Die

013364373
48860-1: RNCC: 3 | RNVC: 2
48860: RNCC: 5 | RNVC: 9

26 Mar 1991

5110-01-335-1603
Bent Trimmers Shears

013351603
HDSCISSORS: RNCC: 3 | RNVC: 2
YA235: RNCC: 5 | RNVC: 9
KER235: RNCC: 5 | RNVC: 9
YA235A: RNCC: 5 | RNVC: 9

6 Mar 1991

5110-01-335-1592
Hand File

013351592
8CT: RNCC: 3 | RNVC: 2

6 Mar 1991

5110-01-335-1601
End Cutting Nippers

013351601
PLEC7: RNCC: 3 | RNVC: 2
17CP: RNCC: 5 | RNVC: 9
17ACP: RNCC: 5 | RNVC: 9

6 Mar 1991

5110-01-437-3095
File Cleaning Brush

014373095
21458: RNCC: 3 | RNVC: 2
21458: RNCC: 5 | RNVC: 9

9 Oct 1996

5110-00-942-6899
Fastener Collar Cutter

009426899
105-8: RNCC: 3 | RNVC: 2
105-8: RNCC: 5 | RNVC: 2
105-8: RNCC: 5 | RNVC: 2
105-8: RNCC: 5 | RNVC: 9

12 Dec 1965

5110-00-795-0165
Water Pump Refacer

007950165
7950165: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-01-368-4062
Hand Cape Chisel

013684062
C-46: RNCC: 3 | RNVC: 2

1 Dec 1992

5110-01-365-7229
Reamer

013657229
ST432-3: RNCC: 3 | RNVC: 2

12 Oct 1992

5110-01-367-3895
File Handle

013673895
73-99210: RNCC: 3 | RNVC: 2
SIM 73-99210: RNCC: 5 | RNVC: 2

10 Nov 1992

5110-01-360-4564
Hand Reamer

013604564
4090325-59: RNCC: 3 | RNVC: 2
4090325-59: RNCC: 3 | RNVC: 9

24 Jun 1992

5110-01-632-1951
Hand Wire Stripper

016321951
55-2905: RNCC: 3 | RNVC: 2

9 Oct 2014

5110-01-630-7301
Pocket Scissors

016307301
769250: RNCC: 3 | RNVC: 2

15 Aug 2014

5110-01-360-7741
Hand File

013607741
A-A-2437: RNCC: 4 | RNVC: 1
40604: RNCC: 5 | RNVC: 2
40604: RNCC: 5 | RNVC: 9
GGG-F-331 TY13CL2: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9

1 Jul 1992

5110-01-618-7918
Hand Reamer

016187918
408JXN00566: RNCC: 3 | RNVC: 2

6 May 2013

5110-01-596-2268
Diagonal Cutting Pliers

015962268
B87CP: RNCC: 3 | RNVC: 2

13 May 2011

5110-01-358-4915
Hand Leather Stamping Die Set

013584915
310080406: RNCC: 3 | RNVC: 2

14 May 1992

5110-01-379-4500
Hand Wire Stripper

013794500
AD-1298-1-TRIMR-TWISTD-PR: RNCC: 3 | RNVC: 2
AD1298: RNCC: 5 | RNVC: 9

31 Aug 1993

5110-01-595-0372
Pliers

015950372
J28300: RNCC: 3 | RNVC: 2
28300: RNCC: 5 | RNVC: 9

25 Apr 2011

5110-01-432-6186
Pocket Knife

014326186
C10SBK: RNCC: 3 | RNVC: 2

10 Jun 1996

5110-01-628-2171
Hand Cable Stripper

016282171
UST-500: RNCC: 3 | RNVC: 9

14 May 2014

5110-01-357-9695
Inclosed Blade Tube Deburring Tool

013579695
DB-6: RNCC: 3 | RNVC: 9

6 May 1992

5110-01-358-4916
Hand Leather Stamping Die Set

013584916
310080438: RNCC: 3 | RNVC: 2

14 May 1992

5110-01-358-4914
Hand Leather Stamping Die Set

013584914
310080391: RNCC: 3 | RNVC: 2

14 May 1992

5110-01-430-3048
Hand File

014303048
5110-01-430-3048: RNCC: 3 | RNVC: 2
11904: RNCC: 5 | RNVC: 2
11904: RNCC: 5 | RNVC: 9

26 Apr 1996

5110-01-430-5191
Hand File Set

014305191
HB80: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-00-133-4158
Cleaning Tool Reamer

001334158
2473032-1: RNCC: 3 | RNVC: 2
2473032-1: RNCC: 5 | RNVC: 9

20 Jul 1974

5110-01-625-8292
Hand Metal Cutting Punch And Die Set

016258292
MP4150: RNCC: 3 | RNVC: 2

18 Feb 2014

5110-01-626-2038
Bolt Cutter

016262038
ETS12L-12: RNCC: 3 | RNVC: 2

3 Mar 2014

5110-01-355-8507
Metal Cutting Hand Saw

013558507
HS3: RNCC: 3 | RNVC: 2

25 Mar 1992

5110-01-356-3106
Hand Cable Stripper

013563106
45-126: RNCC: 3 | RNVC: 2

1 Apr 1992

5110-01-356-6611
Diagonal Cutting Pliers

013566611
B107.500: RNCC: 3 | RNVC: 1
MS54: RNCC: 3 | RNVC: 2
B107.500 CAT 11 TY1CL2: RNCC: 5 | RNVC: 1
B107.11: RNCC: 5 | RNVC: 9
B107.11 TY1CL2: RNCC: 5 | RNVC: 9
942-4C: RNCC: 5 | RNVC: 9
MS54: RNCC: 5 | RNVC: 9

8 Apr 1992

5110-01-378-6086
Diagonal Cutting Pliers

013786086
E707ACG: RNCC: 3 | RNVC: 2
E707BCG: RNCC: 5 | RNVC: 2

21 Aug 1993

5110-01-430-1644
Pocket Knife

014301644
LB5: RNCC: 3 | RNVC: 2

24 Apr 1996

5110-01-429-7390
Hand Metal Cutting Shears

014297390
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 16 TY2CL4: RNCC: 5 | RNVC: 1
DAR9A: RNCC: 5 | RNVC: 2
B107.16: RNCC: 5 | RNVC: 9
B107.16M: RNCC: 5 | RNVC: 9
B107.16 TY2CL4: RNCC: 5 | RNVC: 9
P6510R: RNCC: C | RNVC: 1

17 Apr 1996

5110-01-606-5271
Exposed Blade Tube Deburring Tool

016065271
64148: RNCC: 3 | RNVC: 2

18 May 2012

5110-01-428-5258
Nested Saws

014285258
15-175: RNCC: 3 | RNVC: 2
15-175: RNCC: 5 | RNVC: 2
5R795: RNCC: 5 | RNVC: 2

27 Mar 1996

5110-01-373-2487
Hand Wire Stripper

013732487
45-1987: RNCC: 3 | RNVC: 2
5110PL1684359: RNCC: 6 | RNVC: 9

30 Mar 1993

5110-01-368-3509
Embroidery Scissors

013683509
5110-01-368-3509: RNCC: 3 | RNVC: 2
9921 7097: RNCC: 5 | RNVC: 2

30 Nov 1992

5110-01-603-2575
Diagonal Cutting Pliers

016032575
67-113: RNCC: 3 | RNVC: 2
67-113: RNCC: 5 | RNVC: 9

27 Feb 2012

5110-01-603-5862
Diagonal Cutting Pliers

016035862
E709BCG: RNCC: 3 | RNVC: 2
5110PL1678379: RNCC: 6 | RNVC: 9

7 Mar 2012

5110-01-266-1958
Hand Reamer

012661958
SPT12-74D110174-5001TD: RNCC: 3 | RNVC: 2
TF02140-1: RNCC: 5 | RNVC: 2

22 Oct 1987

5110-01-536-8509
Tube Cutter

015368509
33070: RNCC: 3 | RNVC: 2
00.02.10.16: RNCC: 5 | RNVC: 2
00.02.10.16: RNCC: 5 | RNVC: 9

18 Jan 2006

5110-01-573-9715
Sealant Scraper Set

015739715
BAT-ATH8PC: RNCC: 3 | RNVC: 2

11 May 2009

5110-00-596-0921
Crosscut Hand Saw

005960921
GGG-S-65: RNCC: 4 | RNVC: 1
GGG-S-65 TY5: RNCC: 5 | RNVC: 1
MS16325-4: RNCC: 5 | RNVC: 9
D12S26: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-1149
Hand Reamer

005961149
153RL: RNCC: 3 | RNVC: 1
GGGR180TYPE3CLASS3GRADEA: RNCC: 4 | RNVC: 1

1 Jan 1963

5110-01-601-4846
Dimpling Die

016014846
07-521-4704: RNCC: 3 | RNVC: 2

19 Jan 2012

5110-01-368-4457
Hand Metal Cutting Shears

013684457
M3R: RNCC: 3 | RNVC: 1
07286500: RNCC: 5 | RNVC: 2
M3R: RNCC: 5 | RNVC: 9

1 Dec 1992

5110-00-596-4368
Hand Reamer

005964368
53C20381-3120: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-596-4369
Hand Reamer

005964369
53C20381-3720: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-596-9371
Bearing Scraper

005969371
5110-00-596-9371: RNCC: 3 | RNVC: 2
GGG-S-113: RNCC: 5 | RNVC: 9
GGG-S-113 TY2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-236-9651
Dielectric Trim Jig

012369651
KTD-81: RNCC: 3 | RNVC: 9

24 Jul 1986

5110-01-345-7723
Hand Cable Stripper

013457723
IDEAL 45-163: RNCC: 3 | RNVC: 9
AE-1529: RNCC: 5 | RNVC: 1
AE-1529 SHEET 8: RNCC: 5 | RNVC: 2
AE-1529/7: RNCC: 5 | RNVC: 2
AE-1529 ITEM 7: RNCC: 5 | RNVC: 2
DBA-4001-01: RNCC: 5 | RNVC: 2

24 Sep 1991

5110-01-367-3829
Hand Wire Stripper

013673829
PWC43: RNCC: 3 | RNVC: 2

10 Nov 1992

5110-01-367-3978
Hand Metal Stamping Die Set

013673978
1556T38: RNCC: 3 | RNVC: 2

11 Nov 1992

5110-01-467-4823
Hand File

014674823
WSM10: RNCC: 3 | RNVC: 2

31 Aug 1999

5110-01-570-3178
Pocket Knife

015703178
CRATER C33: RNCC: 3 | RNVC: 2

22 Dec 2008

5110-01-596-2266
Hand Wire Stripper

015962266
721: RNCC: 3 | RNVC: 2

13 May 2011

5110-01-596-9949
Hand File

015969949
HBF4SQ: RNCC: 3 | RNVC: 2

25 May 2011

5110-01-266-1963
Hand Reamer

012661963
SPT17-74D110174-5001TD: RNCC: 3 | RNVC: 2
TF02145-1: RNCC: 5 | RNVC: 2

22 Oct 1987

5110-01-547-2000
Hand Reamer

015472000
1171-009: RNCC: 3 | RNVC: 2

12 Jan 2007

5110-01-481-7713
Aircr Wire Stripper

014817713
45-1551: RNCC: 3 | RNVC: 2

25 Jan 2001

5110-01-595-6998
Craftsman's Knife

015956998
X3202: RNCC: 3 | RNVC: 2
X3202: RNCC: 5 | RNVC: 9

4 May 2011

5110-01-240-7644
Hand Cable Stripper

012407644
368-CK: RNCC: 3 | RNVC: 2
368: RNCC: 5 | RNVC: 9

18 Sep 1986

5110-01-341-3971
Hand Reamer

013413971
J28460: RNCC: 3 | RNVC: 9

27 Jun 1991

5110-01-341-1034
Pliers

013411034
171SEB: RNCC: 3 | RNVC: 2
91628886: RNCC: 5 | RNVC: 2
171SEB: RNCC: 5 | RNVC: 9

25 Jun 1991

5110-01-590-9667
Fiber Optic Scribe

015909667
45-359: RNCC: 3 | RNVC: 2

5 Jan 2011

5110-01-540-4387
Hand File

015404387
GS18215-4: RNCC: 3 | RNVC: 2

18 May 2006

5110-01-540-1141
Bushin Removal Tool

015401141
5HG90819-111: RNCC: 3 | RNVC: 2

9 May 2006

5110-01-555-8509
Hand Metal Cutting Punch And Die Set

015558509
CPDS0013: RNCC: 3 | RNVC: 2
G83133: RNCC: 5 | RNVC: 2
CMP13: RNCC: 5 | RNVC: 9

17 Sep 2007

5110-01-575-9196
Drill Reamer

015759196
3854AS400-14: RNCC: 3 | RNVC: 2
3854AS400-14: RNCC: 5 | RNVC: 2
3854AS400-14: RNCC: 5 | RNVC: 2
3854AS400-14: RNCC: 5 | RNVC: 2
3854AS400-14: RNCC: 5 | RNVC: 2
3854AS400-14: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-582-7197
Hand Wire Stripper

015827197
45-215M: RNCC: 3 | RNVC: 2

3 Mar 2010

5110-01-645-7416
Fiber Optic Cleaver Guide

016457416
0703-3742: RNCC: 3 | RNVC: 2

25 Jun 2015

5110-01-537-5824
Dimpling Die

015375824
AT254DA-5: RNCC: 3 | RNVC: 9
AT254DA-5: RNCC: C | RNVC: 1

14 Feb 2006

5110-01-678-2378
Hand Diamond Point Chisel

016782378
LM4027: RNCC: 3 | RNVC: 2

28 Jan 2019

5110-01-677-9074
Grabber

016779074
LCC - PINCER - 280: RNCC: 3 | RNVC: 2

11 Jan 2019

5110-01-677-9080
Hand Operated Cable Cutter Blade

016779080
MCC SHORTING HEAD - 340: RNCC: 3 | RNVC: 2

11 Jan 2019

5110-01-678-5112
Hand Optical Fiber Cleaving Tool

016785112
FC-6RM-C: RNCC: 3 | RNVC: 2

11 Feb 2019

5110-01-645-0073
Double Bow Cutting Punch Set

016450073
S1274: RNCC: 3 | RNVC: 2
GGG-P-833: RNCC: 4 | RNVC: 1
GGG-P-833 TY1CLBST1: RNCC: 5 | RNVC: 1

31 May 2015

5110-00-511-0604
Hand Reamer

005110604
T24957: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-355-8503
Hand Cold Chisel

013558503
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1
PPC408B: RNCC: 5 | RNVC: 2
PPC408A: RNCC: 5 | RNVC: 9
B107.48: RNCC: 5 | RNVC: 9
B107.48 TY1CL2: RNCC: 5 | RNVC: 9

25 Mar 1992

5110-01-531-8344
Tool-Chute Pack-Clo

015318344
LA-AG906: RNCC: 3 | RNVC: 2

21 Jul 2005

5110-01-533-9035
Hand Reamer

015339035
105501: RNCC: 3 | RNVC: 2

29 Sep 2005

5110-01-648-0749
Knockout Punch And Die Set

016480749
7306SB: RNCC: 3 | RNVC: 2

14 Sep 2015

5110-01-355-9572
Hand Reamer

013559572
556-002: RNCC: 3 | RNVC: 2
907: RNCC: 5 | RNVC: 2
556-002: RNCC: 5 | RNVC: 9

27 Mar 1992

5110-01-361-2812
Wheel Gage Assembly

013612812
10893888: RNCC: 3 | RNVC: 2

13 Jul 1992

5110-01-561-9923
Hand Reamer

015619923
FTSR-3-0-3-C: RNCC: 3 | RNVC: 2

25 Mar 2008

5110-01-670-0223
Hand Operated Cable Cutter

016700223
KMS-K: RNCC: 3 | RNVC: 2

1 Feb 2018

5110-01-670-7004
Hand Cable Stripper

016707004
45-118SRS: RNCC: 3 | RNVC: 2

2 Mar 2018

5110-01-671-1930
Stamping Die Set

016711930
CHH27779: RNCC: 3 | RNVC: 2

19 Mar 2018

5110-01-671-7482
Hand Bull Point Chisel

016717482
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1
G480: RNCC: 5 | RNVC: 2
B107.48: RNCC: 5 | RNVC: 9
B107.48 TY1CL2: RNCC: 5 | RNVC: 9

9 Apr 2018

5110-01-672-0187
Hand Operated Cable Cutter

016720187
9000: RNCC: 3 | RNVC: 2
9000: RNCC: 5 | RNVC: 2

19 Apr 2018

5110-01-631-2578
Tube Cutter Cutting Wheel

016312578
MS-TCW-308: RNCC: 3 | RNVC: 2

5 Sep 2014

5110-01-524-1991
Die Assembly Ram

015241991
ZT187302-3/16: RNCC: 3 | RNVC: 2

23 Sep 2004

5110-01-669-1198
Edge Cutting Trimming Tool

016691198
UTS105A: RNCC: 3 | RNVC: 2

21 Dec 2017

5110-01-586-0695
Pocket Knife

015860695
C79BK: RNCC: 3 | RNVC: 2
ASSIST I BLACK FRN: RNCC: 5 | RNVC: 2

17 Jun 2010

5110-00-473-7833
Spray Booth Scraper

004737833
S-119: RNCC: 3 | RNVC: 2
S-40: RNCC: 3 | RNVC: 2
A-A-2482: RNCC: 4 | RNVC: 1
S-40: RNCC: 5 | RNVC: 9
S-119-2276: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-520-6932
Tube Cutter

015206932
TC25A: RNCC: 3 | RNVC: 2
TC25: RNCC: 5 | RNVC: 9

21 May 2004

5110-01-520-6933
Knife Blade

015206933
YA1850A: RNCC: 3 | RNVC: 2
YA1850: RNCC: 5 | RNVC: 9

21 May 2004

5110-01-090-5872
Hand Operated Cable Cutter

010905872
89010 PRO AMERICA: RNCC: 3 | RNVC: 2

22 Feb 1980

5110-01-693-9376
Coping Saw Blade

016939376
CS-SBM-S8B: RNCC: 3 | RNVC: 2

11 Mar 2021

5110-01-646-2298
Hand Reamer

016462298
44-610: RNCC: 3 | RNVC: 2

15 Jul 2015

5110-01-645-8364
Knockout Punch And Die

016458364
125T015-305C: RNCC: 3 | RNVC: 2

30 Jun 2015

5110-01-646-6321
Hand Cold Chisel

016466321
PCSG812: RNCC: 3 | RNVC: 2

27 Jul 2015

5110-01-646-6370
Scraping Knife

016466370
235075: RNCC: 3 | RNVC: 2
235075: RNCC: 5 | RNVC: 2

27 Jul 2015

5110-01-518-9740
Glass Cutter

015189740
AB885: RNCC: 3 | RNVC: 2
GLAS-MASTER: RNCC: 5 | RNVC: 9

30 Mar 2004

5110-01-106-5463
Plug Cutter

011065463
PWA55366: RNCC: 3 | RNVC: 2

21 Jan 1981

5110-01-551-5356
Pliers

015515356
ATSK3579: RNCC: 3 | RNVC: 2
04-3579: RNCC: 3 | RNVC: 2

18 May 2007

5110-01-518-0748
Hand Wire Stripper

015180748
45-124: RNCC: 3 | RNVC: 2

1 Mar 2004

5110-01-575-9168
Piloted Reamer

015759168
3854AS300-26: RNCC: 3 | RNVC: 2
3854AS300-26: RNCC: 5 | RNVC: 2
3854AS300-26: RNCC: 5 | RNVC: 2
3854AS300-26: RNCC: 5 | RNVC: 2
3854AS300-26: RNCC: 5 | RNVC: 2
3854AS300-26: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9125
Piloted Reamer

015759125
3854AS300-40: RNCC: 3 | RNVC: 2
3854AS300-40: RNCC: 5 | RNVC: 2
3854AS300-40: RNCC: 5 | RNVC: 2
3854AS300-40: RNCC: 5 | RNVC: 2
3854AS300-40: RNCC: 5 | RNVC: 2
3854AS300-40: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-550-7440
Hand Wire Stripper

015507440
A114317: RNCC: 3 | RNVC: 1
A114317-01: RNCC: 3 | RNVC: 2

26 Apr 2007

5110-01-684-5732
Hand Wire Stripper

016845732
FORS-0600M1100: RNCC: 3 | RNVC: 2

6 Nov 2019

5110-01-569-9090
Crosscut Hand Saw

015699090
46048: RNCC: 3 | RNVC: 2
123830: RNCC: 5 | RNVC: 2

10 Dec 2008

5110-01-428-5406
Metal Cutting Hand Saw

014285406
K151: RNCC: 3 | RNVC: 2
15-170: RNCC: 5 | RNVC: 9
5C927: RNCC: 5 | RNVC: 9
15-170: RNCC: 5 | RNVC: 9

27 Mar 1996

5110-01-431-5870
Hand Metal Cutting Shears

014315870
20SR: RNCC: 3 | RNVC: 2

16 May 1996

5110-01-545-1460
Deburring Tool Blade

015451460
05751342: RNCC: 3 | RNVC: 2
3BE300: RNCC: 5 | RNVC: 2
3BE300: RNCC: 5 | RNVC: 9

2 Nov 2006

5110-01-548-1778
Hand Metal Cutting Punch And Die

015481778
TLPP: RNCC: 3 | RNVC: 2
TLPP: RNCC: 5 | RNVC: 2
TLPP: RNCC: 5 | RNVC: 9

12 Feb 2007

5110-01-541-8468
Hand Operated Cable Cutter

015418468
CXC-1: RNCC: 3 | RNVC: 2

12 Jul 2006

5110-01-579-5726
Knife Blade

015795726
K16912: RNCC: 3 | RNVC: 2

17 Nov 2009

5110-01-555-8507
Dimpling Punch

015558507
F-20 5/8 IN.: RNCC: 3 | RNVC: 2
N02670: RNCC: 5 | RNVC: 2

17 Sep 2007

5110-01-542-4508
Hand Reamer

015424508
9727047-05: RNCC: 3 | RNVC: 2

7 Aug 2006

5110-01-540-0548
Hand Operated Cable Cutter

015400548
FT233A: RNCC: 3 | RNVC: 9

8 May 2006

5110-01-678-7968
Diagonal Cutting Pliers

016787968
B107.500: RNCC: 3 | RNVC: 1
P87150CT: RNCC: 3 | RNVC: 2
B107.500 CAT 11 TY2CL3: RNCC: 5 | RNVC: 1
P87150CT: RNCC: 5 | RNVC: 2
B107.11 TY2CL3: RNCC: 5 | RNVC: 9
B107.11: RNCC: 5 | RNVC: 9

26 Feb 2019

5110-01-679-2924
Bow Saw Blade

016792924
208-6183: RNCC: 3 | RNVC: 2

18 Mar 2019

5110-01-392-1697
Circle Cutter

013921697
PWA81374: RNCC: 3 | RNVC: 2

24 Jun 1994

5110-01-615-9129
Hand Wire Stripper

016159129
B107.500: RNCC: 3 | RNVC: 1
45-2564: RNCC: 3 | RNVC: 2
B107.500 CAT 37 TY1CL1: RNCC: 5 | RNVC: 1
B107.37: RNCC: 5 | RNVC: 9
B107.37 TY1CL1: RNCC: 5 | RNVC: 9

27 Jan 2013

5110-01-677-7234
Steel Strapping Cutter

016777234
MIP-2100: RNCC: 3 | RNVC: 2

2 Jan 2019

5110-01-536-1413
Hand Wire Stripper

015361413
B107.500: RNCC: 3 | RNVC: 1
45-416: RNCC: 3 | RNVC: 2
45-416: RNCC: 5 | RNVC: 1
B107.500 CAT 37 TY2CL1: RNCC: 5 | RNVC: 1
A113905 ITEM 13: RNCC: 5 | RNVC: 9
A113905 ITEM 13: RNCC: C | RNVC: 1

20 Dec 2005

5110-01-536-7909
Tube Cutter

015367909
66737: RNCC: 3 | RNVC: 2
00.02.07.13: RNCC: 5 | RNVC: 2
00.02.07.13: RNCC: 5 | RNVC: 9

13 Jan 2006

5110-01-674-5946
Metal Cutter Blade

016745946
945065: RNCC: 3 | RNVC: 2

2 Aug 2018

5110-01-674-9190
Keyhole Saw

016749190
FMHT20559: RNCC: 3 | RNVC: 2
FMHT20559: RNCC: 5 | RNVC: 2

15 Aug 2018

5110-01-675-6956
Hose Cutter

016756956
AL4010851: RNCC: 3 | RNVC: 2
AL4010851: RNCC: 5 | RNVC: 2

20 Sep 2018

5110-01-184-6860
Pinking Shears

011846860
4H: RNCC: 3 | RNVC: 2

21 Jul 1984

5110-01-374-0905
Hand Reamer

013740905
5-13-4439: RNCC: 3 | RNVC: 2

16 Apr 1993

5110-01-536-4283
Hand Wire Stripper-Crimper

015364283
758PL301: RNCC: 3 | RNVC: 2

4 Jan 2006

5110-01-668-0494
Hand Cable Stripper

016680494
GST-600A: RNCC: 3 | RNVC: 2
OCE 120 1102/005A: RNCC: D | RNVC: 9

8 Nov 2017

5110-01-629-6580
Hand Metal Cutting Shears

016296580
5110-00-NIB-0043: RNCC: 3 | RNVC: 2
510000403N: RNCC: 3 | RNVC: 2
ACM13526: RNCC: 5 | RNVC: 2

10 Jul 2014

5110-01-103-1249
Oil Filter Can Cutter

011031249
CT-470: RNCC: 3 | RNVC: 2

9 Nov 1980

5110-01-670-2235
Single Bit Ax

016702235
92BKPTH: RNCC: 3 | RNVC: 2

12 Feb 2018

5110-01-367-8136
Drilled Hole Deburring Tool

013678136
04-RDB: RNCC: 3 | RNVC: 9

19 Nov 1992

5110-01-532-8423
Tool Crimping Dyes

015328423
LA-M22520/10-23: RNCC: 3 | RNVC: 2

22 Aug 2005

5110-01-569-6190
Pocket Knife

015696190
110088: RNCC: 3 | RNVC: 2
CERAMIC GAMMA KNIFE: RNCC: 5 | RNVC: 2

4 Dec 2008

5110-01-390-6898
Hand Bushing Splitting Tool

013906898
C901884: RNCC: 3 | RNVC: 2
C901884: RNCC: 5 | RNVC: 9

24 May 1994

5110-01-531-8815
Tool-Chute-No3 Bit

015318815
LA-L203C18-8: RNCC: 3 | RNVC: 2

21 Jul 2005

5110-01-661-6695
Tube Cutter

016616695
31622: RNCC: 3 | RNVC: 2
11A7000178: RNCC: 7 | RNVC: 2

13 Mar 2017

5110-01-663-4732
Pliers

016634732
E719BCG: RNCC: 3 | RNVC: 2

11 May 2017

5110-01-626-3578
Tube Cutter

016263578
PXC058: RNCC: 3 | RNVC: 2

6 Mar 2014

5110-01-387-0054
Hand Operated Cable Cutter

013870054
C-7: RNCC: 3 | RNVC: 2

23 Feb 1994

5110-01-529-0656
Hand Cable Stripper

015290656
CST596711: RNCC: 3 | RNVC: 2

4 Apr 2005

5110-01-529-1760
Hand Wire Stripper

015291760
45-2692: RNCC: 3 | RNVC: 2

6 Apr 2005

5110-01-561-5611
Diagonal Cutting Pliers

015615611
67-123: RNCC: 3 | RNVC: 2
67-123: RNCC: 5 | RNVC: 9

10 Mar 2008

5110-01-177-4112
Bushing Reamer Set

011774112
J29613: RNCC: 3 | RNVC: 2

25 Apr 1984

5110-01-383-4702
Die Block

013834702
361037: RNCC: 3 | RNVC: 2

24 Nov 1993

5110-01-525-6513
Craftsman's Knife

015256513
758IE7565: RNCC: 3 | RNVC: 2

18 Nov 2004

5110-01-525-9473
Nozzle Broach Set

015259473
B53-1101B: RNCC: 3 | RNVC: 2

1 Dec 2004

5110-01-493-3126
Adpt Torque Wrench

014933126
87001402-TQTL: RNCC: 3 | RNVC: 2

27 Dec 2001

5110-01-561-4015
Scraping Knife

015614015
245-7605783 TYPE 1, ITEM 7: RNCC: 3 | RNVC: 2

4 Mar 2008

5110-01-618-5663
Blade Scraper

016185663
120-34-SP391: RNCC: 3 | RNVC: 2
120-34-SP391: RNCC: 5 | RNVC: 9

28 Apr 2013

5110-01-645-1528
Hand Metal Stamping Die Set

016451528
22250: RNCC: 3 | RNVC: 1

4 Jun 2015

5110-01-555-8508
Dimpling Punch

015558508
F-20 1 IN.: RNCC: 3 | RNVC: 2
N02682: RNCC: 5 | RNVC: 2

17 Sep 2007

5110-01-390-4903
Craftsman's Knife

013904903
K16909: RNCC: 3 | RNVC: 2
JACK THE RIPPER KNIFE: RNCC: 5 | RNVC: 1

20 May 1994

5110-01-660-3907
Hand Operated Wire Rope Cutter

016603907
147A: RNCC: 3 | RNVC: 2

19 Jan 2017

5110-01-615-0247
Bench Wire Stripper

016150247
LB-916: RNCC: 3 | RNVC: 2

21 Dec 2012

5110-01-674-6067
Hand Operated Cable Cutter

016746067
945064: RNCC: 3 | RNVC: 2

3 Aug 2018

5110-01-673-9468
Bolt Cutter

016739468
ALTI-BC-024: RNCC: 3 | RNVC: 2

6 Jul 2018

5110-01-680-5645
Knife Blade

016805645
3-11-301: RNCC: 3 | RNVC: 2

10 May 2019

5110-01-179-1897
Deburring Tool Blade

011791897
B10: RNCC: 3 | RNVC: 2

16 May 1984

5110-01-486-9563
Knife Blade

014869563
9810-24-1000-38: RNCC: 3 | RNVC: 2

19 Jul 2001

5110-01-611-7010
Bench Wire Stripper

016117010
55-5560: RNCC: 3 | RNVC: 2

24 Sep 2012

5110-01-612-1305
Starting Reamer

016121305
1155-299: RNCC: 3 | RNVC: 2

3 Oct 2012

5110-01-486-2258
Hand Cold Chisel

014862258
B107.410: RNCC: 3 | RNVC: 1
B107.48 TY1CL2: RNCC: 5 | RNVC: 1
B107.48: RNCC: 5 | RNVC: 1
6DJV5: RNCC: 5 | RNVC: 2
J86A7/8X8S2: RNCC: 5 | RNVC: 2
B107.47M: RNCC: 5 | RNVC: 9
86A 7/8X8: RNCC: 5 | RNVC: 9

21 Jun 2001

5110-00-430-0865
Tube Cutter Cutting Wheel

004300865
33160: RNCC: 3 | RNVC: 2
GGG-C-771: RNCC: 4 | RNVC: 1
GGG-C-771 TY2CL2: RNCC: 5 | RNVC: 1
F158: RNCC: 5 | RNVC: 2

9 Feb 1972

5110-01-548-3418
Line Cutter

015483418
HOOK: RNCC: 3 | RNVC: 2
HOOK: RNCC: 5 | RNVC: 2

20 Feb 2007

5110-01-547-9800
Tubing Connection Reseating Tool

015479800
RTHF4: RNCC: 3 | RNVC: 2
TO 21M-LGM30F-4-4 FIG156 IND 56: RNCC: 5 | RNVC: 2

5 Feb 2007

5110-01-548-5417
Pocket Knife

015485417
01AKS74: RNCC: 3 | RNVC: 2
KALASHNIKOV 74-01AKS74: RNCC: 5 | RNVC: 2

26 Feb 2007

5110-01-644-0381
Hand Metal Stamping Die

016440381
20951U: RNCC: 3 | RNVC: 2

20 Apr 2015

5110-01-650-3750
Diagonal Cutting Pliers

016503750
822N: RNCC: 3 | RNVC: 2
822N: RNCC: 5 | RNVC: 2

1 Dec 2015

5110-01-544-8459
Hand Reamer

015448459
9C1383: RNCC: 3 | RNVC: 2

24 Oct 2006

5110-01-543-1958
Bearing Removal Cutter Tool

015431958
RKC4103-8: RNCC: 3 | RNVC: 2

31 Aug 2006

5110-01-543-1956
Bearing Removal Tool Cutter

015431956
RKC4101-9CUT: RNCC: 3 | RNVC: 2

31 Aug 2006

5110-01-113-6714
Knockout Punch And Die

011136714
500-4006-5: RNCC: 3 | RNVC: 2

31 May 1981

5110-01-197-9572
Pliers

011979572
330 SEB: RNCC: 3 | RNVC: 2
45001600: RNCC: 5 | RNVC: 2
48905: RNCC: 5 | RNVC: 2
48905: RNCC: 5 | RNVC: 9
330 SEB: RNCC: 5 | RNVC: 9
45001600: RNCC: 5 | RNVC: 9

31 Dec 1984

5110-01-523-1230
Pipe Cutter

015231230
7.0060: RNCC: 3 | RNVC: 2

20 Aug 2004

5110-01-652-1084
File Cleaning Brush

016521084
73993500: RNCC: 3 | RNVC: 1

9 Feb 2016

5110-01-575-1544
Pocket Knife

015751544
KER1475: RNCC: 3 | RNVC: 2
STORM II: RNCC: 5 | RNVC: 1
1475: RNCC: 5 | RNVC: 2

22 Jun 2009

5110-00-395-8404
Spark Plug I Cutter

003958404
806861: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-542-0628
Hand File Set

015420628
GS18284: RNCC: 3 | RNVC: 2

20 Jul 2006

5110-01-540-2167
Hand Cable Stripper

015402167
FT850: RNCC: 3 | RNVC: 9

11 May 2006

5110-01-604-4871
Hand Drill

016044871
FRS DC940KX: RNCC: 3 | RNVC: 2

6 Apr 2012

5110-01-568-4202
Metal Stud Cutter

015684202
JVB-1001: RNCC: 3 | RNVC: 2
STUDCUTTER: RNCC: 5 | RNVC: 2

29 Oct 2008

5110-01-601-4845
Dimpling Die

016014845
07-521-4705: RNCC: 3 | RNVC: 2

19 Jan 2012

5110-01-603-5867
Scraping Knife

016035867
ST982LF: RNCC: 3 | RNVC: 2

7 Mar 2012

5110-01-603-5860
Hand Wire Stripper

016035860
DMC45-125: RNCC: 3 | RNVC: 2

7 Mar 2012

5110-01-537-8548
Hand Reamer

015378548
TLSRC-6-1: RNCC: 3 | RNVC: 2

28 Feb 2006

5110-01-538-0044
Hand Wire Stripper

015380044
45-501: RNCC: 3 | RNVC: 2

7 Mar 2006

5110-01-186-7749
Wire Wrapping Tool Bit

011867749
KB24: RNCC: 3 | RNVC: 9
118-000: RNCC: 5 | RNVC: 2
122X410: RNCC: 5 | RNVC: 2
Q125B143: RNCC: 5 | RNVC: 9
KB24: RNCC: 5 | RNVC: 9
125B143: RNCC: 5 | RNVC: 9

14 Aug 1984

5110-01-518-2112
Hand Metal Stamping Die Set

015182112
02271: RNCC: 3 | RNVC: 2
YNG02271: RNCC: 3 | RNVC: 2

4 Mar 2004

5110-01-643-6743
Wire Stripper Blade

016436743
45-2565-1: RNCC: 3 | RNVC: 2
45-2565-1: RNCC: 5 | RNVC: 2

9 Apr 2015

5110-01-645-1680
Fireman's Strap Cutting Knife

016451680
AMTC-K2003-OCP: RNCC: 3 | RNVC: 2

5 Jun 2015

5110-01-688-2260
Boiler Tube Cutter Cutter Bit

016882260
RC-750-2: RNCC: 3 | RNVC: 2
2993374: RNCC: 5 | RNVC: 2

8 May 2020

5110-01-644-0395
Hand Metal Stamping Die

016440395
20951F: RNCC: 3 | RNVC: 2

20 Apr 2015

5110-01-644-0365
Hand Metal Stamping Die

016440365
20951R: RNCC: 3 | RNVC: 2

20 Apr 2015

5110-01-691-8564
Pliers

016918564
14100393: RNCC: 3 | RNVC: 2
2749591: RNCC: 5 | RNVC: 2

3 Nov 2020

5110-01-693-6251
Scraper Blade

016936251
JNT21102-BLUE: RNCC: 3 | RNVC: 2

24 Feb 2021

5110-01-679-5016
Floor Scraper

016795016
8H-8580: RNCC: 3 | RNVC: 2

27 Mar 2019

5110-01-686-7960
Wire Stop

016867960
AS5768/1: RNCC: 3 | RNVC: 1
L-5270: RNCC: 3 | RNVC: 2
L-52700: RNCC: 5 | RNVC: 2

4 Mar 2020

5110-01-580-9479
Sealant Scraper

015809479
41006-01: RNCC: 3 | RNVC: 2

30 Dec 2009

5110-01-580-9788
Hand Operated Wire Rope Cutter

015809788
WC16: RNCC: 3 | RNVC: 2
22-WC16: RNCC: 5 | RNVC: 2

2 Jan 2010

5110-01-661-6700
Hand Metal Stamping Die Set

016616700
22941: RNCC: 3 | RNVC: 2
11A7000121: RNCC: 7 | RNVC: 2

13 Mar 2017

5110-01-661-6293
Hand Metal Stamping Die Set

016616293
21480: RNCC: 3 | RNVC: 2
11A7000074: RNCC: 7 | RNVC: 2

10 Mar 2017

5110-01-578-6889
J Knife Assembly

015786889
8179482: RNCC: 3 | RNVC: 2

15 Oct 2009

5110-01-579-5663
Hand File Set

015795663
351IE207: RNCC: 3 | RNVC: 2
351IE207: RNCC: 5 | RNVC: 2

17 Nov 2009

5110-01-578-9359
Cable Stripper Blade

015789359
K-6491: RNCC: 3 | RNVC: 2
K-6491: RNCC: 5 | RNVC: 2

26 Oct 2009

5110-01-577-7395
Kevlar Scissors

015777395
79DH495-00: RNCC: 3 | RNVC: 2
2498A27: RNCC: 5 | RNVC: 2
2498A27: RNCC: 5 | RNVC: 2
8210LRXB: RNCC: 5 | RNVC: 2

16 Sep 2009

5110-01-577-6984
Diagonal Cutting Pliers

015776984
79DH481-00: RNCC: 3 | RNVC: 2
3711A6: RNCC: 5 | RNVC: 2
3711A6: RNCC: 5 | RNVC: 2

15 Sep 2009

5110-01-578-4860
Electric Metal Cutting Shears

015784860
B-3-1: RNCC: 3 | RNVC: 2

7 Oct 2009

5110-01-577-4087
Pliers

015774087
2403E: RNCC: 3 | RNVC: 2
2403E: RNCC: 5 | RNVC: 9

3 Sep 2009

5110-01-032-7675
Pipe Cutter

010327675
8605-031: RNCC: 3 | RNVC: 2

21 Dec 1976

5110-01-575-9108
Piloted Reamer

015759108
3854AS300-29: RNCC: 3 | RNVC: 2
3854AS300-29: RNCC: 5 | RNVC: 2
3854AS300-29: RNCC: 5 | RNVC: 2
3854AS300-29: RNCC: 5 | RNVC: 2
3854AS300-29: RNCC: 5 | RNVC: 2
3854AS300-29: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9195
Drill Reamer

015759195
3854AS400-18: RNCC: 3 | RNVC: 2
3854AS400-18: RNCC: 5 | RNVC: 2
3854AS400-18: RNCC: 5 | RNVC: 2
3854AS400-18: RNCC: 5 | RNVC: 2
3854AS400-18: RNCC: 5 | RNVC: 2
3854AS400-18: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-549-6712
Hand Operated Cable Cutter Blade

015496712
WCB-750: RNCC: 3 | RNVC: 2

28 Mar 2007

5110-00-180-0957
Tinner's Hollow Cutting Punch

001800957
GGG-P-833: RNCC: 4 | RNVC: 1
GGG-P-833 TY1CLCST1SZ7: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-01-572-0912
Pliers

015720912
T60085: RNCC: 3 | RNVC: 2

27 Feb 2009

5110-01-540-1017
Hand Optical Fiber Stripper

015401017
39162: RNCC: 3 | RNVC: 9

9 May 2006

5110-01-541-0584
Pocket Folding Multi-Tool

015410584
830158: RNCC: 3 | RNVC: 1
SURGE: RNCC: 3 | RNVC: 2
5010-199: RNCC: 5 | RNVC: 2
SURGE/SS/LEATHER: RNCC: 5 | RNVC: 2

14 Jun 2006

5110-00-981-3106
Injector Ball Seat Cutter

009813106
ST955: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-01-509-0929
Hand Wire Stripper

015090929
45-217: RNCC: 3 | RNVC: 2

11 Jun 2003

5110-01-678-0715
Hand Reamer

016780715
CBR-6-0-N-1-.1895: RNCC: 3 | RNVC: 2

18 Jan 2019

5110-01-633-5020
Hand Reamer

016335020
CBR-4-4-N-1-1800: RNCC: 3 | RNVC: 2

25 Nov 2014

5110-01-633-5023
Hand Reamer

016335023
CBR-6-1-N-1-2070: RNCC: 3 | RNVC: 2

25 Nov 2014

5110-01-274-1624
Diagonal Cutting Pliers

012741624
111CG: RNCC: 3 | RNVC: 2
111CG: RNCC: 5 | RNVC: 9

5 Mar 1988

5110-00-148-9811
Electricians Shears

001489811
34F780: RNCC: 3 | RNVC: 2

28 Aug 1974

5110-01-671-7377
Glass Cutter

016717377
01-511: RNCC: 3 | RNVC: 2

9 Apr 2018

5110-01-671-7374
Hand File

016717374
13807M: RNCC: 3 | RNVC: 2

9 Apr 2018

5110-01-630-7218
Hand Reamer Set

016307218
6052: RNCC: 3 | RNVC: 2

15 Aug 2014

5110-01-473-1815
Hand Metal Cutting Shears

014731815
KS-6: RNCC: 3 | RNVC: 2
AP01225: RNCC: 3 | RNVC: 2
247-0029-050: RNCC: 5 | RNVC: 9

29 Mar 2000

5110-01-474-0084
Knockout Punch And Die

014740084
KP1500B: RNCC: 3 | RNVC: 2
KP1500B GARDNER BENDER: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-199-6016
Hand Reamer

011996016
14958-003: RNCC: 3 | RNVC: 2
14958-003: RNCC: 5 | RNVC: 9

24 Jan 1985

5110-01-626-2286
Mattock Head Ax

016262286
SHRIKE: RNCC: 3 | RNVC: 2
AX13: RNCC: 5 | RNVC: 2

4 Mar 2014

5110-01-665-5123
Hand Optical Fiber Stripper

016655123
39390: RNCC: 3 | RNVC: 2

2 Aug 2017

5110-01-667-3390
Hand Operated Wire Rope Cutter

016673390
45-344: RNCC: 3 | RNVC: 2
45-344: RNCC: 5 | RNVC: 2
KEVLAR-SCHERE: RNCC: 5 | RNVC: 2
HT2804 REF. SD2 1172: RNCC: 5 | RNVC: 2
2291534: RNCC: 5 | RNVC: 2
26026441: RNCC: 5 | RNVC: 2

12 Oct 2017

5110-01-629-6578
Hand Metal Cutting Shears

016296578
5110-00-NIB-0042: RNCC: 3 | RNVC: 2
510000501N: RNCC: 3 | RNVC: 2
ACM 14849: RNCC: 5 | RNVC: 2

10 Jul 2014

5110-01-624-6231
Edge Cutting Trimming Tool

016246231
K11705: RNCC: 3 | RNVC: 2

9 Jan 2014

5110-01-642-4206
Tailor's Shears

016424206
5290018: RNCC: 3 | RNVC: 2

25 Feb 2015

5110-01-646-2299
Hand Reamer

016462299
30-394: RNCC: 3 | RNVC: 2

15 Jul 2015

5110-01-234-5928
Spare Jaws

012345928
CBC-40-0801F: RNCC: 3 | RNVC: 2

17 Jun 1986

5110-00-115-2356
Wire Stripper Blade Set

001152356
L-5210: RNCC: 3 | RNVC: 2
L5210: RNCC: 3 | RNVC: 2
5210: RNCC: 5 | RNVC: 2
L5210: RNCC: 5 | RNVC: 2
VG95236T16BA006: RNCC: 5 | RNVC: 2
L5210: RNCC: 5 | RNVC: 2
100016-9005-365: RNCC: 5 | RNVC: 9
L5210: RNCC: 5 | RNVC: 9
100016-9005-365: RNCC: 5 | RNVC: 9
5210: RNCC: 5 | RNVC: 9

13 Sep 1968

5110-01-624-6929
Celcon Scraper Inse

016246929
JNT-TKC: RNCC: 3 | RNVC: 2

13 Jan 2014

5110-01-625-9278
Knockout Punch And Die Set

016259278
MP4151: RNCC: 3 | RNVC: 2

20 Feb 2014

5110-01-618-9282
Pipe Cutter Cutting Wheel

016189282
27645A12: RNCC: 3 | RNVC: 2

10 May 2013

5110-01-619-2149
Hand Reamer

016192149
3026A44: RNCC: 3 | RNVC: 2

21 May 2013

5110-01-620-2008
Hand Metal Stamping Die Set

016202008
FSPP-103-00-012: RNCC: 3 | RNVC: 2

9 Jul 2013

5110-01-493-3123
Airc Tool Set Valve

014933123
CUTA3750114C: RNCC: 3 | RNVC: 2

27 Dec 2001

5110-01-623-5053
Wire Stripper Blade Set

016235053
LB722: RNCC: 3 | RNVC: 2

18 Nov 2013

5110-01-623-2915
Hand File Set

016232915
88250: RNCC: 3 | RNVC: 2

6 Nov 2013

5110-01-623-4161
Revolving Head Cutting Punch

016234161
YA8290A: RNCC: 3 | RNVC: 2

13 Nov 2013

5110-01-525-9472
Nozzle Broach Set

015259472
FF-TCN: RNCC: 3 | RNVC: 2

1 Dec 2004

5110-01-136-0050
Cutting Blade

011360050
F2635-5: RNCC: 3 | RNVC: 2
F2635-5: RNCC: 5 | RNVC: 2

3 Aug 1982

5110-01-616-3265
Diagonal Cutting Pliers

016163265
S420: RNCC: 3 | RNVC: 2
162-679: RNCC: 5 | RNVC: 2

10 Feb 2013

5110-01-625-9288
Knockout Punch And Die Set

016259288
MP8074: RNCC: 3 | RNVC: 2

20 Feb 2014

5110-01-619-6728
Draw Knife

016196728
AMTC-X0001-B: RNCC: 3 | RNVC: 2

12 Jun 2013

5110-01-518-2994
Knife Blade

015182994
L500B: RNCC: 3 | RNVC: 2

8 Mar 2004

5110-01-192-0918
Hand Wire Stripper

011920918
525655: RNCC: 3 | RNVC: 2
525655: RNCC: 5 | RNVC: 9
525655: RNCC: 5 | RNVC: 9
525655: RNCC: 5 | RNVC: 9

16 Oct 1984

5110-01-621-0888
Pliers

016210888
FA-188.16VE: RNCC: 3 | RNVC: 2

22 Aug 2013

5110-01-604-3754
Hand Hacksaw Blade

016043754
1224BIP: RNCC: 3 | RNVC: 2
FRS 1224BIP: RNCC: 5 | RNVC: 9

3 Apr 2012

5110-01-571-1894
Bolt Cutter

015711894
BC-001: RNCC: 3 | RNVC: 2
BC-001: RNCC: 5 | RNVC: 2

27 Jan 2009

5110-01-645-7415
Fiber Optic Cleaver Guide

016457415
0703-3741: RNCC: 3 | RNVC: 2

25 Jun 2015

5110-00-241-9134
Hand File

002419134
5110-00-241-9134: RNCC: 3 | RNVC: 2
08529: RNCC: 5 | RNVC: 2
A-A-2316: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
08529: RNCC: 5 | RNVC: 9
GGG-F-325 TY13CL2STB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-7580
Hand File

002397580
A-A-2436: RNCC: 4 | RNVC: 1

1 Jan 1963

5110-00-240-7661
Bearing Scraper

002407661
1411: RNCC: 3 | RNVC: 2
59036: RNCC: 5 | RNVC: 2
GGG-S-113 TY2: RNCC: 5 | RNVC: 9
GGG-S-113: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-593-1823
Straight Trimmers Shears

015931823
HCS2036-01-53L: RNCC: 3 | RNVC: 2

4 Apr 2011

5110-01-596-9948
Hand File

015969948
HBF4T: RNCC: 3 | RNVC: 2

25 May 2011

5110-01-428-9259
Pliers Set

014289259
PL802A: RNCC: 3 | RNVC: 2
PL802: RNCC: 5 | RNVC: 9

3 Apr 1996

5110-01-571-1610
Hand File

015711610
A-A-2441: RNCC: 4 | RNVC: 1
36755: RNCC: 5 | RNVC: 2
36755: RNCC: 5 | RNVC: 2
36755: RNCC: 5 | RNVC: 9

26 Jan 2009

5110-01-644-0361
Hand Metal Stamping Die

016440361
20951P: RNCC: 3 | RNVC: 2

20 Apr 2015

5110-01-644-4973
Rigid Handle Machete

016444973
31-000705: RNCC: 3 | RNVC: 2

8 May 2015

5110-00-233-9714
Hand Rasp

002339714
A-A-2326: RNCC: 4 | RNVC: 1
17751: RNCC: 5 | RNVC: 2
17751: RNCC: 5 | RNVC: 9
GGG-F-325 TY24STB: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-240-4692
Linoleum Block Tool

002404692
4: RNCC: 3 | RNVC: 9

31 Oct 1969

5110-01-612-1491
Nosecap

016121491
3003-001: RNCC: 3 | RNVC: 2

3 Oct 2012

5110-01-612-4652
Hand Optical Fiber Stripper

016124652
0700-3130: RNCC: 3 | RNVC: 2

11 Oct 2012

5110-01-612-9386
Hand Drill

016129386
ATCP4-UT8896-170-1.5-AF23: RNCC: 3 | RNVC: 2

25 Oct 2012

5110-01-570-3196
Rigid Handle Machete

015703196
ONSP8: RNCC: 3 | RNVC: 2

22 Dec 2008

5110-01-642-5829
Hand Cable Stripper

016425829
272PL2020: RNCC: 3 | RNVC: 2

3 Mar 2015

5110-01-335-1593
Hand File

013351593
10CT: RNCC: 3 | RNVC: 2

6 Mar 1991

5110-01-335-1421
Hand Cold Chisel

013351421
B107.410: RNCC: 3 | RNVC: 1
J86A3/4X8S2: RNCC: 3 | RNVC: 2
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1
PPC828B: RNCC: 5 | RNVC: 2
6DJU6: RNCC: 5 | RNVC: 2
J86A3/4X8: RNCC: 5 | RNVC: 2
B107.48: RNCC: 5 | RNVC: 9
B107.48 TY1CL2: RNCC: 5 | RNVC: 9
PPC828A: RNCC: 5 | RNVC: 9
FRS PPC828B: RNCC: 5 | RNVC: 9

6 Mar 1991

5110-01-566-0527
Hand Reamer

015660527
J-39919: RNCC: 3 | RNVC: 2
5715153: RNCC: 5 | RNVC: 2

18 Aug 2008

5110-01-514-7770
General Purpose Knife Sharpener

015147770
RE0198: RNCC: 3 | RNVC: 2
REDI-EDGE: RNCC: 5 | RNVC: 1

4 Nov 2003

5110-01-641-2678
Hand File Set

016412678
SGFMX104: RNCC: 3 | RNVC: 2

15 Jan 2015

5110-01-200-2861
Torque Wrench Adapter Assy

012002861
313130-000: RNCC: 3 | RNVC: 2

1 Feb 1985

5110-01-572-5024
Paper Cutter

015725024
43574021: RNCC: 3 | RNVC: 2

12 Mar 2009

5110-01-575-9177
Piloted Reamer

015759177
3854AS300-10: RNCC: 3 | RNVC: 2
3854AS300-10: RNCC: 5 | RNVC: 2
3854AS300-10: RNCC: 5 | RNVC: 2
3854AS300-10: RNCC: 5 | RNVC: 2
3854AS300-10: RNCC: 5 | RNVC: 2
3854AS300-10: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9126
Piloted Reamer

015759126
3854AS300-43: RNCC: 3 | RNVC: 2
3854AS300-43: RNCC: 5 | RNVC: 2
3854AS300-43: RNCC: 5 | RNVC: 2
3854AS300-43: RNCC: 5 | RNVC: 2
3854AS300-43: RNCC: 5 | RNVC: 2
3854AS300-43: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-00-243-2508
File Holder

002432508
5110-00-243-2508: RNCC: 3 | RNVC: 2
08908V: RNCC: 5 | RNVC: 2
21272: RNCC: 5 | RNVC: 2
108: RNCC: 5 | RNVC: 2
472: RNCC: 5 | RNVC: 2
81-993700: RNCC: 5 | RNVC: 2
25: RNCC: 5 | RNVC: 2
6070: RNCC: 5 | RNVC: 9
FH14: RNCC: 5 | RNVC: 9
25: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-243-2628
Hand Cable Stripper

002432628
5110-00-243-2628: RNCC: 3 | RNVC: 2
N62267: RNCC: 5 | RNVC: 2
R62267: RNCC: 5 | RNVC: 2
R62267: RNCC: 5 | RNVC: 2
R62267: RNCC: 5 | RNVC: 9
R62267: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-478-5592
Pipe Cutter

014785592
4A506: RNCC: 3 | RNVC: 2
32820: RNCC: 3 | RNVC: 2
2A: RNCC: 5 | RNVC: 1

18 Sep 2000

5110-01-502-9974
Knife Blade

015029974
80C8HS: RNCC: 3 | RNVC: 2
80C8HS: RNCC: 3 | RNVC: 9

27 Nov 2002

5110-00-222-9010
Hand Reamer

002229010
B94.2: RNCC: 3 | RNVC: 1
801 7-16: RNCC: 3 | RNVC: 2
GGG-R-180 TY1CL2GRB: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-221-0233
Miter Box Saw

002210233
GGG-S-65: RNCC: 4 | RNVC: 1
GGG-S-65 TY10: RNCC: 5 | RNVC: 1
4: RNCC: 5 | RNVC: 9
MS16330-1: RNCC: 5 | RNVC: 9
4M-MITER: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-604-4764
Gasket Cutting Punch

016044764
PGH8-10: RNCC: 3 | RNVC: 2
FRS PGH8-10: RNCC: 5 | RNVC: 9

6 Apr 2012

5110-00-233-9679
Hand File

002339679
37109: RNCC: 3 | RNVC: 2
A-A-2447: RNCC: 5 | RNVC: 9
37109: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL6: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-233-9696
Hand File

002339696
A-A-2452: RNCC: 4 | RNVC: 1
37333: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
37333: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL11: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-316-8674
Hand Metal Cutting Shears

013168674
CD10: RNCC: 3 | RNVC: 9

16 Mar 1990

5110-01-564-3559
Hand Optical Fiber Stripper

015643559
0700-3055: RNCC: 3 | RNVC: 2

12 Jun 2008

5110-01-428-5235
Craftsman's Knife

014285235
10-402: RNCC: 3 | RNVC: 2
5R679: RNCC: 5 | RNVC: 2

27 Mar 1996

5110-01-633-0868
Cable Stripper Blade

016330868
CPT-BK7: RNCC: 3 | RNVC: 2

6 Nov 2014

5110-01-675-4313
Hand Reamer

016754313
P5501034: RNCC: 3 | RNVC: 2

11 Sep 2018

5110-01-569-1948
Rebar Cutter

015691948
22-RC19: RNCC: 3 | RNVC: 2

21 Nov 2008

5110-01-436-9032
Craftsman's Knife

014369032
0-10-150: RNCC: 3 | RNVC: 2
781350: RNCC: 5 | RNVC: 2
0-10-150: RNCC: 5 | RNVC: 9

30 Sep 1996

5110-01-672-3970
Pocket Knife

016723970
30-001321: RNCC: 3 | RNVC: 2

30 Apr 2018

5110-01-673-0501
Hand Operated Wire Rope Cutter

016730501
63045: RNCC: 3 | RNVC: 2

30 May 2018

5110-01-674-0076
Hand Cold Chisel

016740076
J86038: RNCC: 3 | RNVC: 2

10 Jul 2018

5110-01-671-9374
Tube Cutter

016719374
RS7290: RNCC: 3 | RNVC: 2

16 Apr 2018

5110-01-672-0575
Exposed Blade Tube Deburring Tool

016720575
35155: RNCC: 3 | RNVC: 2

20 Apr 2018

5110-01-668-8737
Hand Optical Fiber Stripper

016688737
81400: RNCC: 3 | RNVC: 2

11 Dec 2017

5110-01-668-6288
Bolt Cutter Jaws

016686288
BLPBC30-1: RNCC: 3 | RNVC: 2

30 Nov 2017

5110-01-668-7168
Chain Drill Attachment

016687168
ATI315BS: RNCC: 3 | RNVC: 2

5 Dec 2017

5110-01-669-1382
Pocket Folding Multi-Tool

016691382
830948: RNCC: 3 | RNVC: 2
56L830956-100: RNCC: 5 | RNVC: 2

22 Dec 2017

5110-01-395-2010
Hand Metal Stamping Die

013952010
S7928: RNCC: 3 | RNVC: 2

23 Aug 1994

5110-01-395-4266
Pull-T Socket Chuck

013954266
S7926: RNCC: 3 | RNVC: 2

29 Aug 1994

5110-01-248-2268
Cutting Tool

012482268
VHCT: RNCC: 3 | RNVC: 2

20 Jan 1987

5110-01-595-6992
Keyhole Saw Blade

015956992
X215: RNCC: 3 | RNVC: 2
15: RNCC: 5 | RNVC: 9
X215: RNCC: 5 | RNVC: 9

4 May 2011

5110-01-288-3464
Knockout Punch And Die

012883464
ZT2953-3-16: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-667-7250
Miter Box Saw

016677250
C10FCH2: RNCC: 3 | RNVC: 2

27 Oct 2017

5110-01-562-3849
Pliers

015623849
16616: RNCC: 3 | RNVC: 2

7 Apr 2008

5110-01-390-7431
Can Closing Tool

013907431
C02004C063: RNCC: 3 | RNVC: 2
C02004C063: RNCC: 5 | RNVC: 9

25 May 1994

5110-01-693-4429
Edge Cutting Trimming Tool

016934429
MN-SCUT-QE: RNCC: 3 | RNVC: 2

11 Feb 2021

5110-01-601-4848
Dimpling Die

016014848
07-5952-4704: RNCC: 3 | RNVC: 2

19 Jan 2012

5110-01-400-1419
Hand Metal Cutting Shears

014001419
J317: RNCC: 3 | RNVC: 2
3R296: RNCC: 5 | RNVC: 2
317: RNCC: 5 | RNVC: 9

9 Dec 1994

5110-01-599-6831
File Handle

015996831
ETG-101: RNCC: 3 | RNVC: 2
456720005500: RNCC: 6 | RNVC: 9

13 Oct 2011

5110-01-600-3070
Arm Extension Kit

016003070
DSI-110-0144: RNCC: 3 | RNVC: 2
DSI-110-0144: RNCC: 3 | RNVC: 2
DSI-110-0144: RNCC: 5 | RNVC: 9

22 Nov 2011

5110-01-234-5930
Spare Jaws

012345930
CBC-40-1201F: RNCC: 3 | RNVC: 2

17 Jun 1986

5110-01-589-8804
Hand File Set

015898804
MER GNSI62: RNCC: 3 | RNVC: 2

7 Nov 2010

5110-01-590-3964
Hand Optical Fiber Stripper

015903964
46107: RNCC: 3 | RNVC: 2
CFS-2: RNCC: 5 | RNVC: 2

3 Dec 2010

5110-01-299-7834
Hand Optical Fiber Stripper

012997834
927-1049: RNCC: 3 | RNVC: 2

5 May 1989

5110-01-300-3404
Hand Cable Stripper

013003404
462ST433: RNCC: 3 | RNVC: 2

12 May 1989

5110-00-926-3533
Hand Operated Wire Rope Cutter

009263533
A-A-3029: RNCC: 4 | RNVC: 1
A-A-3029 SZ3: RNCC: 5 | RNVC: 1
CC.0040: RNCC: 5 | RNVC: 2
C1750: RNCC: 5 | RNVC: 2
GGG-C-800: RNCC: 5 | RNVC: 9
M0DELCHYDRASHEAR: RNCC: 5 | RNVC: 9

1 Apr 1966

5110-01-598-1741
Dimpling Die

015981741
07-510-4705: RNCC: 3 | RNVC: 2

6 Jul 2011

5110-01-588-0775
Scraping Knife Set

015880775
PKNC300: RNCC: 3 | RNVC: 2

31 Aug 2010

5110-00-293-3048
Hand Reamer

002933048
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
764-0530-000: RNCC: 5 | RNVC: 9
53RL: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-0365
Dimpling Punch

002930365
33D902-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-293-0364
Dimpling Punch

002930364
36D1328-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-294-4431
Hand Reamer

002944431
53C20381-3440: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-684-5605
Hand Reamer Set

016845605
BAT-PRK30: RNCC: 3 | RNVC: 2

6 Nov 2019

5110-01-377-2172
Wire Stripper Blade Set

013772172
45-1513-1: RNCC: 3 | RNVC: 2
45-1513-1: RNCC: 3 | RNVC: 2
VG95236T16AA001: RNCC: 5 | RNVC: 2
45-1513-1: RNCC: 5 | RNVC: 2

9 Jul 1993

5110-01-681-5632
Knife Blade

016815632
FMHT10330-0: RNCC: 3 | RNVC: 2
3253560103309: RNCC: 5 | RNVC: 2

24 Jun 2019

5110-01-680-9303
Pocket Folding Multi-Tool

016809303
GERBER MP1-AR: RNCC: 3 | RNVC: 2

29 May 2019

5110-01-682-2653
Scraper Blade

016822653
SF-ACST-556: RNCC: 3 | RNVC: 2
18502C-1: RNCC: 5 | RNVC: 2

30 Jul 2019

5110-01-683-6871
Craftsman's Knife

016836871
06904: RNCC: 3 | RNVC: 2

2 Oct 2019

5110-01-682-8639
Pocket Folding Multi-Tool

016828639
31-003073: RNCC: 3 | RNVC: 2

27 Aug 2019

5110-01-595-0496
Dimpling Die

015950496
SM132DR6-3/16: RNCC: 3 | RNVC: 2

25 Apr 2011

5110-01-596-2270
Pocket Knife

015962270
TVA7340-2-266-003/0: RNCC: 3 | RNVC: 2

13 May 2011

5110-01-398-9368
Hand Cold Chisel

013989368
00942971000: RNCC: 3 | RNVC: 2
42971: RNCC: 5 | RNVC: 2
9-42971: RNCC: 5 | RNVC: 9

11 Nov 1994

5110-01-398-9369
Hand Cold Chisel

013989369
00942975000: RNCC: 3 | RNVC: 2
42975: RNCC: 5 | RNVC: 2
9-42975: RNCC: 5 | RNVC: 9

11 Nov 1994

5110-01-665-6895
Hand Operated Wire Rope Cutter

016656895
9200LHAS: RNCC: 3 | RNVC: 2

9 Aug 2017

5110-01-667-3136
Hand File

016673136
SGF4R: RNCC: 3 | RNVC: 2

11 Oct 2017

5110-01-397-0675
Flexible Shaft Assembly Core Swaging And Squaring Tool

013970675
3376085: RNCC: 3 | RNVC: 2
3376085: RNCC: 5 | RNVC: 2

30 Sep 1994

5110-01-662-5612
Hand Hacksaw Blade

016625612
LS 0310: RNCC: 3 | RNVC: 2

12 Apr 2017

5110-00-186-4191
Hand Reamer

001864191
B94.2: RNCC: 3 | RNVC: 1
21493: RNCC: 5 | RNVC: 2
02057024: RNCC: 5 | RNVC: 2
C24948: RNCC: 5 | RNVC: 2
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY5CL1STAGRA: RNCC: 5 | RNVC: 9
24948: RNCC: 5 | RNVC: 9
644: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-6724
Hand Reamer

001866724
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-6780
Hand Reamer

001866780
A-A-2937: RNCC: 4 | RNVC: 1
GGG-R-180 TY3CL1GRB: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
RP437: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-6781
Hand Reamer

001866781
R1618: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-186-6718
Hand Reamer

001866718
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
103HS 39/64 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-188-0745
Hand Reamer

001880745
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY1CL1GRB: RNCC: 5 | RNVC: 9
102CS 1-5/16 IN.: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-188-0763
Hand Reamer

001880763
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRB: RNCC: 5 | RNVC: 9
102CS 1-7/8 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-575-9142
Drill Reamer

015759142
3854AS400-29: RNCC: 3 | RNVC: 2
3854AS400-29: RNCC: 5 | RNVC: 2
3854AS400-29: RNCC: 5 | RNVC: 2
3854AS400-29: RNCC: 5 | RNVC: 2
3854AS400-29: RNCC: 5 | RNVC: 2
3854AS400-29: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-576-4034
Hand Optical Fiber Stripper

015764034
FO 103-T-250-J: RNCC: 3 | RNVC: 2
FO-103-T-250-J: RNCC: 5 | RNVC: 2
FO-103-T-250-J: RNCC: 5 | RNVC: 2
T-F0-103-T-250-J: RNCC: 5 | RNVC: 2

30 Jul 2009

5110-01-575-9124
Piloted Reamer

015759124
3854AS300-6: RNCC: 3 | RNVC: 2
3854AS300-6: RNCC: 5 | RNVC: 2
3854AS300-6: RNCC: 5 | RNVC: 2
3854AS300-6: RNCC: 5 | RNVC: 2
3854AS300-6: RNCC: 5 | RNVC: 2
3854AS300-6: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9155
Piloted Reamer

015759155
3854AS300-19: RNCC: 3 | RNVC: 2
3854AS300-19: RNCC: 5 | RNVC: 2
3854AS300-19: RNCC: 5 | RNVC: 2
3854AS300-19: RNCC: 5 | RNVC: 2
3854AS300-19: RNCC: 5 | RNVC: 2
3854AS300-19: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9118
Piloted Reamer

015759118
3854AS300-32: RNCC: 3 | RNVC: 2
3854AS300-32: RNCC: 5 | RNVC: 2
3854AS300-32: RNCC: 5 | RNVC: 2
3854AS300-32: RNCC: 5 | RNVC: 2
3854AS300-32: RNCC: 5 | RNVC: 2
3854AS300-32: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9141
Drill Reamer

015759141
3854AS400-27: RNCC: 3 | RNVC: 2
3854AS400-27: RNCC: 5 | RNVC: 2
3854AS400-27: RNCC: 5 | RNVC: 2
3854AS400-27: RNCC: 5 | RNVC: 2
3854AS400-27: RNCC: 5 | RNVC: 2
3854AS400-27: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-661-9233
Crosscut Hand Saw

016619233
20-045: RNCC: 3 | RNVC: 2
20-045: RNCC: 5 | RNVC: 2

20 Mar 2017

5110-01-661-6320
Hand Hacksaw Blade

016616320
1224BI-10: RNCC: 3 | RNVC: 2
11A7000048: RNCC: 7 | RNVC: 2

10 Mar 2017

5110-01-589-1193
Hand Reamer

015891193
2550140: RNCC: 3 | RNVC: 2

19 Oct 2010

5110-01-659-8296
Hand Reamer

016598296
ST-366-5: RNCC: 3 | RNVC: 2

19 Dec 2016

5110-01-477-4921
Aircraf Arbor Guide

014774921
21C14239G03: RNCC: 3 | RNVC: 2

10 Aug 2000

5110-01-392-5847
Pliers

013925847
60309-000: RNCC: 3 | RNVC: 9

1 Jul 1994

5110-01-657-0353
End Cutting Nippers

016570353
B107.500: RNCC: 3 | RNVC: 1
B107.11: RNCC: 5 | RNVC: 1
B107.11 TY4CL2: RNCC: 5 | RNVC: 1
J272G: RNCC: 5 | RNVC: 2
J272G: RNCC: 5 | RNVC: 2
J272G: RNCC: 5 | RNVC: 9

28 Jul 2016

5110-01-658-4244
Hand File

016584244
73-243000: RNCC: 3 | RNVC: 2
73243000: RNCC: 5 | RNVC: 2

26 Sep 2016

5110-01-658-4273
Knife Blade

016584273
44101: RNCC: 3 | RNVC: 2

27 Sep 2016

5110-00-809-8084
Tube Cutter

008098084
GGG-C-771: RNCC: 4 | RNVC: 1

29 May 1968

5110-01-657-0359
Hand Metal Cutting Shears

016570359
J303LS: RNCC: 3 | RNVC: 2
J303LS: RNCC: 5 | RNVC: 2
J303LS: RNCC: 5 | RNVC: 9

28 Jul 2016

5110-01-265-0744
Knockout Punch And Die

012650744
6097019: RNCC: 3 | RNVC: 2

9 Oct 1987

5110-01-356-6610
Diagonal Cutting Pliers

013566610
942-4: RNCC: 3 | RNVC: 2
942-4: RNCC: 5 | RNVC: 9

8 Apr 1992

5110-01-356-1010
Hand Hacksaw Blade

013561010
2A751: RNCC: 3 | RNVC: 9
HACKMASTER: RNCC: 5 | RNVC: 9

28 Mar 1992

5110-01-358-4909
Hand Leather Stamping Die Set

013584909
310080219: RNCC: 3 | RNVC: 2

14 May 1992

5110-01-234-5929
Spare Jaws

012345929
CBC-40-1001F: RNCC: 3 | RNVC: 2

17 Jun 1986

5110-01-652-0392
Hand Cold Chisel

016520392
J86A1/4S2: RNCC: 3 | RNVC: 1

8 Feb 2016

5110-01-565-0842
Line Cutter

015650842
A-TICUT: RNCC: 3 | RNVC: 2

10 Jul 2008

5110-01-016-6401
Cable Trimming Tool

010166401
MX-103/U: RNCC: 3 | RNVC: 2

15 Feb 1976

5110-01-465-1708
Bearing Scraper

014651708
389: RNCC: 3 | RNVC: 2
59069: RNCC: 5 | RNVC: 2
GGG-S-113 TY3CL1: RNCC: 5 | RNVC: 9
GGG-S-113: RNCC: 5 | RNVC: 9

24 May 1999

5110-01-349-7944
Hand Hacksaw Blade

013497944
HSBM1224A: RNCC: 3 | RNVC: 2
HSBM1224B: RNCC: 5 | RNVC: 2
HSBM1224: RNCC: 5 | RNVC: 9

4 Dec 1991

5110-01-650-3730
Scraping Knife

016503730
PSK2: RNCC: 3 | RNVC: 2

1 Dec 2015

5110-01-097-7346
Paper Cutter

010977346
214-1935-01: RNCC: 3 | RNVC: 2

18 Jul 1980

5110-01-323-8226
Spotfacing Footpiece

013238226
ZT339032: RNCC: 3 | RNVC: 2

5 Aug 1990

5110-00-189-3339
Hand Reamer

001893339
452: RNCC: 3 | RNVC: 9
HV56939: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-322-5553
Spotfacing Footpiece

013225553
ZT339034: RNCC: 3 | RNVC: 2

9 Jul 1990

5110-01-447-6742
Cutting Knife

014476742
K11610: RNCC: 3 | RNVC: 2
HAPPY HOOKER: RNCC: 5 | RNVC: 9

12 Aug 1997

5110-01-004-5968
Die Assembly Ram

010045968
ZT187802-5-16: RNCC: 3 | RNVC: 2

10 Jun 1975

5110-01-465-5328
Hand Optical Fiber Cleaving Tool

014655328
TKT-100-01: RNCC: 3 | RNVC: 2

11 Jun 1999

5110-01-579-5937
Sealant Scraper

015795937
NYZ7014200: RNCC: 3 | RNVC: 2

18 Nov 2009

5110-01-577-4068
Pliers

015774068
2475E: RNCC: 3 | RNVC: 2
5EPT2: RNCC: 5 | RNVC: 2
2475E: RNCC: 5 | RNVC: 9

3 Sep 2009

5110-00-604-5011
Scraper

006045011
2337: RNCC: 3 | RNVC: 9

1 Jan 1961

5110-00-604-5009
Hand Reamer

006045009
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
103HS 51/64 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-314-9970
Hand Hacksaw Blade

013149970
HS12CH: RNCC: 3 | RNVC: 2

9 Feb 1990

5110-01-612-1486
Hand Reamer

016121486
1219-157: RNCC: 3 | RNVC: 2

3 Oct 2012

5110-01-612-6397
Cable Stripper

016126397
176A: RNCC: 3 | RNVC: 2

17 Oct 2012

5110-01-612-1471
Hand Reamer

016121471
1219-004: RNCC: 3 | RNVC: 2

3 Oct 2012

5110-01-460-7673
Metal Cutting Hand Saw

014607673
HS50Y: RNCC: 3 | RNVC: 9

16 Nov 1998

Load More Results