What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 46 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 46of 112

5110-01-365-7633
Crosscut Hand Saw

013657633
65962: RNCC: 3 | RNVC: 2

13 Oct 1992

5110-01-365-8343
Hand File

013658343
84-13150: RNCC: 3 | RNVC: 2
84-13150 SIMONDS: RNCC: 5 | RNVC: 2

15 Oct 1992

5110-01-425-2033
Hand Wire Stripper

014252033
001-104-1: RNCC: 3 | RNVC: 2

14 Feb 1996

5110-01-684-7152
Hand Optical Fiber Cleaving Tool

016847152
FORS-140P11100: RNCC: 3 | RNVC: 2

13 Nov 2019

5110-01-685-0181
Hand Reamer

016850181
16A13220L1-43: RNCC: 3 | RNVC: 2

25 Nov 2019

5110-01-360-4563
Hand Reamer

013604563
4090325-58: RNCC: 3 | RNVC: 2
4090325-58: RNCC: 3 | RNVC: 9

24 Jun 1992

5110-01-679-6708
Diagonal Cutting Pliers

016796708
84-031W: RNCC: 3 | RNVC: 2

5 Apr 2019

5110-01-681-8011
Hand Hacksaw Blade

016818011
20144V218HE: RNCC: 3 | RNVC: 2
57005: RNCC: 5 | RNVC: 2
4RA71: RNCC: 5 | RNVC: 2

8 Jul 2019

5110-01-492-8370
Hand Reamer

014928370
C15138-190A: RNCC: 3 | RNVC: 2

13 Dec 2001

5110-01-429-1096
Scraping Knife

014291096
CSB12C: RNCC: 3 | RNVC: 2
CSB12B: RNCC: 5 | RNVC: 9

4 Apr 1996

5110-01-429-6502
Hand File

014296502
5110-01-429-6502: RNCC: 3 | RNVC: 2
31310: RNCC: 5 | RNVC: 2
00931310000: RNCC: 5 | RNVC: 2
9-31310: RNCC: 5 | RNVC: 9

15 Apr 1996

5110-01-429-6496
Hand File Set

014296496
00931321000: RNCC: 3 | RNVC: 2
31321: RNCC: 5 | RNVC: 2
9-31321: RNCC: 5 | RNVC: 9

15 Apr 1996

5110-01-678-0301
Metal Cutter Blade

016780301
30:1 CUTTER CHAIN LINK CUTTER A-: RNCC: 3 | RNVC: 1

17 Jan 2019

5110-01-460-7667
File Set Needle

014607667
82204: RNCC: 3 | RNVC: 2

16 Nov 1998

5110-01-675-3314
Straight Trimmers Shears

016753314
758IE544: RNCC: 3 | RNVC: 2

5 Sep 2018

5110-00-357-6843
Hand Reamer

003576843
GH375: RNCC: 3 | RNVC: 2
G375: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-459-2659
Bevelling Bit

014592659
43-703-05: RNCC: 3 | RNVC: 2

25 Sep 1998

5110-01-564-4126
Hand File

015644126
LM 2267: RNCC: 3 | RNVC: 2

16 Jun 2008

5110-01-444-6170
Hand Metal Cutting Punch And Die

014446170
153-SZ8 1/4: RNCC: 3 | RNVC: 2

12 May 1997

5110-01-671-9810
Tube Cutter

016719810
RS1PLT: RNCC: 3 | RNVC: 2

17 Apr 2018

5110-01-456-7798
Knife Blade

014567798
YA405-2: RNCC: 3 | RNVC: 2

25 Jun 1998

5110-01-443-7392
Diagonal Cutting Pliers

014437392
P7D: RNCC: 3 | RNVC: 2
P7D: RNCC: 5 | RNVC: 2

16 Apr 1997

5110-01-483-2448
Tool Setdeicer Boot

014832448
3404068-1: RNCC: 3 | RNVC: 2

22 Mar 2001

5110-01-609-6480
Hand Bench Shears

016096480
04-DAL-100: RNCC: 3 | RNVC: 2

31 Jul 2012

5110-01-456-7801
Craftsman's Knife

014567801
YA581A: RNCC: 3 | RNVC: 2
X3243: RNCC: 3 | RNVC: 2
YA581: RNCC: 5 | RNVC: 9

25 Jun 1998

5110-01-301-2013
Loose Tube Stripper

013012013
927-1178: RNCC: 3 | RNVC: 2

25 May 1989

5110-01-438-7874
Wire Stripper Blade

014387874
2131: RNCC: 3 | RNVC: 2
2131: RNCC: 3 | RNVC: 2
2131: RNCC: 3 | RNVC: 2
2131: RNCC: 5 | RNVC: 9

20 Nov 1996

5110-00-398-2691
Hand Reamer

003982691
PWA2869: RNCC: 3 | RNVC: 2

1 Jan 1961

5110-01-437-2018
Pliers

014372018
PWC20: RNCC: 3 | RNVC: 2

7 Oct 1996

5110-01-646-6364
Scraping Knife

016466364
235073: RNCC: 3 | RNVC: 2
235073: RNCC: 5 | RNVC: 2

27 Jul 2015

5110-01-436-9038
Hand File

014369038
13130800: RNCC: 3 | RNVC: 2
13130800: RNCC: 5 | RNVC: 9

30 Sep 1996

5110-01-645-7869
Metal Cutting Hand Saw

016457869
HHBF01: RNCC: 3 | RNVC: 2

28 Jun 2015

5110-01-646-2300
Hand Reamer

016462300
31-217: RNCC: 3 | RNVC: 2

15 Jul 2015

5110-01-644-0397
Hand Metal Stamping Die

016440397
20951H: RNCC: 3 | RNVC: 2

20 Apr 2015

5110-01-644-0398
Hand Metal Stamping Die

016440398
20951I: RNCC: 3 | RNVC: 2

20 Apr 2015

5110-01-644-0396
Hand Metal Stamping Die

016440396
20951G: RNCC: 3 | RNVC: 2

20 Apr 2015

5110-01-644-2508
Pocket Knife

016442508
K16910-BK: RNCC: 3 | RNVC: 2
422000064: RNCC: 5 | RNVC: 2

28 Apr 2015

5110-01-644-0405
Hand Metal Stamping Die

016440405
20951N: RNCC: 3 | RNVC: 2

20 Apr 2015

5110-01-582-0518
Metal Cutting Hand Saw

015820518
680640: RNCC: 3 | RNVC: 2

5 Feb 2010

5110-01-448-4784
Stud Shuck

014484784
S7890: RNCC: 3 | RNVC: 2

29 Aug 1997

5110-01-659-9387
Valve Guide Reamer

016599387
YM-04066: RNCC: 3 | RNVC: 2

22 Dec 2016

5110-01-663-4341
Hand File

016634341
FH-R-12SC: RNCC: 3 | RNVC: 2

9 May 2017

5110-01-665-9547
Hand Metal Cutting Shears

016659547
28203: RNCC: 3 | RNVC: 2

18 Aug 2017

5110-00-393-4790
Scraper Blade

003934790
1935-28: RNCC: 3 | RNVC: 2
58X741: RNCC: 3 | RNVC: 2
63SFG1PC25: RNCC: 3 | RNVC: 2
63SFGPC25: RNCC: 3 | RNVC: 2
WW5709542ACITEM74: RNCC: 3 | RNVC: 2
WW5709542ADITEM74: RNCC: 3 | RNVC: 2
WW5709542ABITEM74: RNCC: 3 | RNVC: 2
63SFGPC25: RNCC: 5 | RNVC: 9
1935-28: RNCC: 5 | RNVC: 9
63SFG1PC25: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-575-9107
Piloted Reamer

015759107
3854AS300-28: RNCC: 3 | RNVC: 2
3854AS300-28: RNCC: 5 | RNVC: 2
3854AS300-28: RNCC: 5 | RNVC: 2
3854AS300-28: RNCC: 5 | RNVC: 2
3854AS300-28: RNCC: 5 | RNVC: 2
3854AS300-28: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-577-4933
Hand File Set

015774933
55607: RNCC: 3 | RNVC: 2

9 Sep 2009

5110-01-696-0655
Diagonal Cutting Pliers

016960655
CHP-170: RNCC: 3 | RNVC: 2

8 Jul 2021

5110-01-657-2598
Wire Stripper Blade

016572598
45-2826-5: RNCC: 3 | RNVC: 2
45-2826-5: RNCC: 5 | RNVC: 2

5 Aug 2016

5110-01-434-9906
Hand File

014349906
A-A-2320: RNCC: 4 | RNVC: 1
13262: RNCC: 5 | RNVC: 2
GGG-F-325 TY17STC: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
13262: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-575-9115
Piloted Reamer

015759115
3854AS300-37: RNCC: 3 | RNVC: 2
3854AS300-37: RNCC: 5 | RNVC: 2
3854AS300-37: RNCC: 5 | RNVC: 2
3854AS300-37: RNCC: 5 | RNVC: 2
3854AS300-37: RNCC: 5 | RNVC: 2
3854AS300-37: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9137
Drill Reamer

015759137
3854AS400-26: RNCC: 3 | RNVC: 2
3854AS400-26: RNCC: 5 | RNVC: 2
3854AS400-26: RNCC: 5 | RNVC: 2
3854AS400-26: RNCC: 5 | RNVC: 2
3854AS400-26: RNCC: 5 | RNVC: 2
3854AS400-26: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-650-3075
Hand Operated Cable Cutter

016503075
400: RNCC: 3 | RNVC: 2

27 Nov 2015

5110-01-651-9245
Hand File

016519245
15395: RNCC: 3 | RNVC: 2
NIC 15395N: RNCC: 5 | RNVC: 2

3 Feb 2016

5110-01-380-8991
Hand File

013808991
5110-01-380-8991: RNCC: 3 | RNVC: 2
6CR: RNCC: 5 | RNVC: 2

29 Sep 1993

5110-01-380-9373
Wire Stripper Blade Set

013809373
AS5768: RNCC: 3 | RNVC: 1
L-5563: RNCC: 3 | RNVC: 2
AS5768/1-B19: RNCC: 5 | RNVC: 1

30 Sep 1993

5110-01-381-0608
File Handle

013810608
HF613: RNCC: 3 | RNVC: 2

6 Oct 1993

5110-01-593-2381
Hand Operated Cable Cutter

015932381
DSI-110-139: RNCC: 3 | RNVC: 2

5 Apr 2011

5110-01-595-6994
Knife Blade

015956994
X235: RNCC: 3 | RNVC: 2
X235: RNCC: 5 | RNVC: 9

4 May 2011

5110-01-313-4336
Craftsman's Knife

013134336
L-1: RNCC: 3 | RNVC: 2
9041: RNCC: 5 | RNVC: 2

9 Jan 1990

5110-01-531-3074
General Knife Sharpener

015313074
REOMT203: RNCC: 3 | RNVC: 2

1 Jul 2005

5110-00-596-7217
Double Bit Ax

005967217
B107.400: RNCC: 3 | RNVC: 1
B107.400 CAT 42 TY2CL1: RNCC: 5 | RNVC: 1
B107.42 TY2: RNCC: 5 | RNVC: 9
GGG-A-926 TY1CL2DEA: RNCC: 5 | RNVC: 9
GGG-A-926: RNCC: 5 | RNVC: 9
B107.42: RNCC: 5 | RNVC: 9
B107.55: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-8098
Craftsman's Knife

005968098
GGG-K-00450: RNCC: 4 | RNVC: 1
GGG-K-450: RNCC: 4 | RNVC: 1
GGG-K-00450 TY1CL2ST1ST2ST4: RNCC: 5 | RNVC: 1
GGG-K-00450 TY1C2ST1ST2ST4: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-01-373-6810
Hand Metal Cutting Punch And Die Set

013736810
200050125: RNCC: 3 | RNVC: 2

9 Apr 1993

5110-00-440-9220
Reamer

004409220
923243: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-422-7705
Knockout Punch And Die

014227705
60259: RNCC: 3 | RNVC: 2
731-7/8: RNCC: 5 | RNVC: 9

7 Dec 1995

5110-00-973-8401
Hand File

009738401
A-A-2316: RNCC: 4 | RNVC: 1
GGG-F-325 TY13CL1: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1960

5110-01-543-1279
Hand Wire Stripper

015431279
C46407A9-A7: RNCC: 3 | RNVC: 9
TO-SS-20-100: RNCC: 5 | RNVC: 2
T-C46407-A9-A7: RNCC: 5 | RNVC: 2

30 Aug 2006

5110-01-607-9981
General Purpose Scissors

016079981
CS-124-BK: RNCC: 3 | RNVC: 2

19 Jun 2012

5110-01-304-3858
Smooth Plane

013043858
A10035: RNCC: 3 | RNVC: 2

18 Jul 1989

5110-01-116-0609
Hand Metal Cutting Shears

011160609
S-1126A: RNCC: 3 | RNVC: 2
S-1126A: RNCC: 5 | RNVC: 9

18 Jul 1981

5110-01-535-4333
Hand Cold Chisel

015354333
B107.410: RNCC: 3 | RNVC: 1
BPPC1878: RNCC: 3 | RNVC: 2
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1
1832A: RNCC: 5 | RNVC: 2
P12612596: RNCC: 5 | RNVC: 2
GGG-C-313 TY4CL2SZ1: RNCC: 5 | RNVC: 9
B107.48: RNCC: 5 | RNVC: 9
GGG-C-313: RNCC: 5 | RNVC: 9
B107.48 TY1CL2: RNCC: 5 | RNVC: 9
P12612596: RNCC: 5 | RNVC: 9

29 Nov 2005

5110-00-439-8007
Hand Reamer

004398007
TAM3574-60: RNCC: 3 | RNVC: 2

1 Jan 1961

5110-01-301-2752
Cutting Punchpliers

013012752
DIE7/32IN: RNCC: 3 | RNVC: 2

26 May 1989

5110-01-301-2746
Cutting Punchpliers

013012746
PUNCH3/32IN: RNCC: 3 | RNVC: 2

26 May 1989

5110-01-416-8860
File Handle

014168860
70563: RNCC: 3 | RNVC: 2

26 Jul 1995

5110-01-530-2290
Diagonal Cutting Pliers

015302290
9426SC: RNCC: 3 | RNVC: 2
9426SC: RNCC: 5 | RNVC: 9

18 May 2005

5110-01-299-0630
Knockout Punch And Die

012990630
2 8160/2 8161: RNCC: 3 | RNVC: 2

25 Apr 1989

5110-01-358-2771
Hand File

013582771
0811-411-8108: RNCC: 3 | RNVC: 2
0811-411-8108: RNCC: 5 | RNVC: 9

11 May 1992

5110-01-358-7561
Strap Cutter

013587561
435862-1: RNCC: 3 | RNVC: 2

20 May 1992

5110-01-601-4847
Dimpling Die

016014847
07-531: RNCC: 3 | RNVC: 2

19 Jan 2012

5110-01-596-2265
Pocket Folding Multi-Tool

015962265
6520: RNCC: 3 | RNVC: 2

13 May 2011

5110-01-356-1011
Hand Hacksaw Blade

013561011
2A752: RNCC: 3 | RNVC: 9
HACKMASTER: RNCC: 5 | RNVC: 9

28 Mar 1992

5110-01-355-8492
Scraping Knife

013558492
PK24: RNCC: 3 | RNVC: 2

25 Mar 1992

5110-01-356-8184
Deburring Tool Kit

013568184
500: RNCC: 3 | RNVC: 2

10 Apr 1992

5110-01-355-8505
Metal Cutting Hand Saw

013558505
HS13: RNCC: 3 | RNVC: 2

25 Mar 1992

5110-00-981-3107
Shaft Bushing Reaming Fixture

009813107
3376903: RNCC: 3 | RNVC: 2
3376903: RNCC: 5 | RNVC: 2
11600038: RNCC: 5 | RNVC: 9
ST490: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-01-547-2078
Edge Cutting Trimming Tool

015472078
FTTC-4-0-2: RNCC: 3 | RNVC: 2

12 Jan 2007

5110-01-282-2751
Rivet Cutter

012822751
3103: RNCC: 3 | RNVC: 2
AJAX3103: RNCC: 3 | RNVC: 2

13 Jul 1988

5110-01-540-9531
Pocket Folding Multi-Tool

015409531
830263: RNCC: 3 | RNVC: 1
KICK/BLACK/NYLON: RNCC: 5 | RNVC: 2

8 Jun 2006

5110-01-541-5844
Cutter Knife

015415844
600-062: RNCC: 3 | RNVC: 2
A40787: RNCC: 5 | RNVC: 2
600-062: RNCC: 5 | RNVC: 2

30 Jun 2006

5110-01-351-1529
File Handle

013511529
10207: RNCC: 3 | RNVC: 2
4322A7: RNCC: 5 | RNVC: 2
445-T7: RNCC: 5 | RNVC: 2

1 Jan 1992

5110-01-351-9068
File Handle

013519068
10203: RNCC: 3 | RNVC: 2
4322A3: RNCC: 5 | RNVC: 2
445-T3: RNCC: 5 | RNVC: 2

17 Jan 1992

5110-01-502-6224
Hand Operated Cable Cutter

015026224
CPT-L4ARC1: RNCC: 3 | RNVC: 2
5110PL0876750: RNCC: 6 | RNVC: 9

14 Nov 2002

5110-00-025-2292
Hand Reamer

000252292
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
71RB: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
761-0710-000: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-025-2324
Hand Reamer

000252324
B94.2: RNCC: 3 | RNVC: 1
59RB: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
761-0590-000: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-555-1784
Ratchet Drill

005551784
A-A-2558: RNCC: 4 | RNVC: 1
GGG-D-698: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-345-9390
Hand Cable Stripper

013459390
2CSKR: RNCC: 3 | RNVC: 2
618ST015: RNCC: 5 | RNVC: 2
3-271: RNCC: 5 | RNVC: 2
48945: RNCC: 5 | RNVC: 2
48945: RNCC: 5 | RNVC: 9
2CSKR: RNCC: 5 | RNVC: 9

25 Sep 1991

5110-00-529-3239
Hand File

005293239
5110-00-529-3239: RNCC: 3 | RNVC: 2
GGG-F-325 TY7STD: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
A-A-2311: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-492-9386
Hand Reamer

014929386
9C2384: RNCC: 3 | RNVC: 2

17 Dec 2001

5110-01-492-7032
Diagonal Cutting Pliers

014927032
87BCPCT: RNCC: 3 | RNVC: 2

10 Dec 2001

5110-01-491-8699
Hand Cable Stripper

014918699
ST1/STC-F: RNCC: 3 | RNVC: 2

5 Nov 2001

5110-01-492-2466
Pocket Folding Multi-Tool

014922466
ST1L: RNCC: 3 | RNVC: 9
ST1L SCHRADE KNIVES: RNCC: 5 | RNVC: 2

19 Nov 2001

5110-01-349-4828
File Handle

013494828
GA617: RNCC: 3 | RNVC: 2

26 Nov 1991

5110-01-393-8331
Wire Stripper Blade

013938331
990340: RNCC: 3 | RNVC: 2
990340: RNCC: 5 | RNVC: 9

27 Jul 1994

5110-00-049-8016
Reamer Pilot

000498016
B94.2: RNCC: 3 | RNVC: 1
RMP468: RNCC: 3 | RNVC: 2
GGG-R-180 TY4SZA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1961

5110-01-507-9190
Aump Housing Installer Remover

015079190
GS24311-1: RNCC: 3 | RNVC: 2
GS24311-1: RNCC: 3 | RNVC: 2

8 May 2003

5110-01-510-1879
Hand Optical Fiber Stripper

015101879
1278947-1: RNCC: 3 | RNVC: 2

15 Jul 2003

5110-00-529-2332
Knockout Punch And Die Set

005292332
GGG-P-836: RNCC: 4 | RNVC: 1
GGG-P-836: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-01-346-6055
Metal Cutting Hand Saw

013466055
713: RNCC: 3 | RNVC: 2

9 Oct 1991

5110-01-446-9308
Tube Cutter

014469308
5-8692: RNCC: 3 | RNVC: 2
5-8692: RNCC: 5 | RNVC: 2

21 Jul 1997

5110-01-050-2240
Hand Reamer

010502240
12254220: RNCC: 3 | RNVC: 2

1 Nov 1977

5110-01-575-9113
Piloted Reamer

015759113
3854AS300-2: RNCC: 3 | RNVC: 2
3854AS300-2: RNCC: 5 | RNVC: 2
3854AS300-2: RNCC: 5 | RNVC: 2
3854AS300-2: RNCC: 5 | RNVC: 2
3854AS300-2: RNCC: 5 | RNVC: 2
3854AS300-2: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9175
Piloted Reamer

015759175
3854AS300-13: RNCC: 3 | RNVC: 2
3854AS300-13: RNCC: 5 | RNVC: 2
3854AS300-13: RNCC: 5 | RNVC: 2
3854AS300-13: RNCC: 5 | RNVC: 2
3854AS300-13: RNCC: 5 | RNVC: 2
3854AS300-13: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-559-9240
Sheet Metal Ripping Cutter

015599240
CT-923: RNCC: 3 | RNVC: 2

9 Jan 2008

5110-01-459-5053
Straight Trimmers Shears

014595053
1120: RNCC: 3 | RNVC: 2
KER1120: RNCC: 3 | RNVC: 2
5110PL1679715: RNCC: 6 | RNVC: 9

5 Oct 1998

5110-01-457-6070
Wire Stripper Blade Set

014576070
45-2014-1: RNCC: 3 | RNVC: 2
VG95236T16AA008: RNCC: 5 | RNVC: 2

28 Jul 1998

5110-01-440-7207
Tubing Connection Reseating Tool

014407207
RTHF6: RNCC: 3 | RNVC: 2

13 Jun 2018

5110-01-339-5742
Stripper Wire Knife

013395742
169277: RNCC: 3 | RNVC: 2

24 May 1991

5110-01-474-4871
Hand File Set

014744871
KIT FS8: RNCC: 3 | RNVC: 2

4 May 2000

5110-01-437-2178
Pocket Knife

014372178
LB5: RNCC: 3 | RNVC: 2
YA864: RNCC: 5 | RNVC: 9

7 Oct 1996

5110-01-442-2274
Diagonal Cutting Pliers

014422274
387BCPCT: RNCC: 3 | RNVC: 9
387ACPCT: RNCC: 5 | RNVC: 9

7 Mar 1997

5110-01-336-5714
Hand File

013365714
73-29900: RNCC: 3 | RNVC: 2
73-29900 SIMONDS: RNCC: 5 | RNVC: 2

27 Mar 1991

5110-01-431-4580
Hand File

014314580
12601002: RNCC: 3 | RNVC: 2
12601002: RNCC: 5 | RNVC: 9

13 May 1996

5110-01-473-9400
Half Hatchet

014739400
B107.400: RNCC: 3 | RNVC: 1
B107.400 CAT 42 TY1CL2: RNCC: 5 | RNVC: 1
E3-2H: RNCC: 5 | RNVC: 2
B107.42: RNCC: 5 | RNVC: 9
B107.42 TY1CL2: RNCC: 5 | RNVC: 9

19 Apr 2000

5110-01-473-9765
Pipe Cutter

014739765
32820: RNCC: 3 | RNVC: 1
RID 2-A: RNCC: 5 | RNVC: 1
RID 32820: RNCC: 5 | RNVC: 1
2-A: RNCC: 5 | RNVC: 1

20 Apr 2000

5110-01-473-9778
Pipe Cutter Cutting Wheel

014739778
33120: RNCC: 3 | RNVC: 2
33120 RIDGID: RNCC: 5 | RNVC: 2
F-515 RIDGID: RNCC: 5 | RNVC: 2
F-515: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-474-4910
Double Bit Ax

014744910
B107.400: RNCC: 3 | RNVC: 1
352WRFG-BSG: RNCC: 3 | RNVC: 2
B107.400 CAT 42 TY2CL1: RNCC: 5 | RNVC: 1
352WRFG-BSG COUNCIL: RNCC: 5 | RNVC: 2

4 May 2000

5110-01-453-1586
Exposed Blade Tube Deburring Tool

014531586
UK2000: RNCC: 3 | RNVC: 2

20 Feb 1998

5110-01-524-0454
Dimpling Die

015240454
ZT1873-5-16: RNCC: 3 | RNVC: 2

22 Sep 2004

5110-01-423-7514
Metal Cutting Hand Saw

014237514
0-15-211: RNCC: 3 | RNVC: 2
1400052: RNCC: 5 | RNVC: 2
15-211: RNCC: 5 | RNVC: 9

9 Jan 1996

5110-01-524-0447
Dimpling Die

015240447
ZT187301-5-16: RNCC: 3 | RNVC: 2

22 Sep 2004

5110-01-430-3059
Hand File

014303059
5110-01-430-3059: RNCC: 3 | RNVC: 2
02373: RNCC: 5 | RNVC: 2
02373: RNCC: 5 | RNVC: 9

26 Apr 1996

5110-01-431-0297
Hand File Set

014310297
SMF6A: RNCC: 3 | RNVC: 2
SMF6: RNCC: 5 | RNVC: 9

6 May 1996

5110-01-520-8280
Steel Strapping Cutter

015208280
3675A11: RNCC: 3 | RNVC: 2

27 May 2004

5110-01-520-8290
Hand File Set

015208290
8182A11: RNCC: 3 | RNVC: 2

27 May 2004

5110-01-521-1921
Dimpling Punch Retainer

015211921
ZT185105: RNCC: 3 | RNVC: 2

14 Jun 2004

5110-01-456-7802
Utility Knife Blade

014567802
YA581A-1: RNCC: 3 | RNVC: 2
YA581-1: RNCC: 5 | RNVC: 9

25 Jun 1998

5110-01-458-4251
Hand Wire Stripper

014584251
DEL501: RNCC: 3 | RNVC: 2
HT-501: RNCC: 3 | RNVC: 2

26 Aug 1998

5110-01-422-7732
Pocket Knife

014227732
BF300: RNCC: 3 | RNVC: 2
B300: RNCC: 5 | RNVC: 9

7 Dec 1995

5110-01-467-8805
Hand File

014678805
14992: RNCC: 3 | RNVC: 2
32.451: RNCC: 3 | RNVC: 2
14992: RNCC: 5 | RNVC: 9

17 Sep 1999

5110-00-690-7839
Curved Face Dieset

006907839
SAX: RNCC: 3 | RNVC: 2
SAX: RNCC: 5 | RNVC: 2
SAXLST: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-01-478-0899
Craftsman's Knife

014780899
42-502: RNCC: 3 | RNVC: 2

30 Aug 2000

5110-01-506-8272
Hand Wire Stripper

015068272
45-1774: RNCC: 3 | RNVC: 2
10349667: RNCC: 6 | RNVC: 9

10 Apr 2003

5110-01-337-8997
Wire Stripper Cassette

013378997
48958: RNCC: 3 | RNVC: 2
3C-GN GREEN: RNCC: 5 | RNVC: 1
3C-GN GREEN: RNCC: 5 | RNVC: 9
48958: RNCC: 5 | RNVC: 9

24 Apr 1991

5110-01-516-5593
Hand Cold Chisel

015165593
1F1161: RNCC: 3 | RNVC: 2

12 Jan 2004

5110-01-517-1950
Hand Cable Stripper

015171950
ST-400EZ: RNCC: 3 | RNVC: 2
ST-400EZ: RNCC: 5 | RNVC: 2
ST-400EZ: RNCC: 5 | RNVC: 2

2 Feb 2004

5110-01-444-1369
Hand Optical Fiber Cleaving Tool

014441369
504064-1: RNCC: 3 | RNVC: 2

29 Apr 1997

5110-01-333-7769
Pipe Cutter Cutting Wheel

013337769
33130: RNCC: 3 | RNVC: 2
2680A29: RNCC: 5 | RNVC: 2
F-229S: RNCC: 5 | RNVC: 2

8 Feb 1991

5110-01-335-1367
Metal Cutting Hand Saw

013351367
HS8A: RNCC: 3 | RNVC: 2

6 Mar 1991

5110-01-336-4192
Hand File

013364192
32.319: RNCC: 3 | RNVC: 2

26 Mar 1991

5110-01-514-7771
General Purpose Knife Sharpener

015147771
REPS201: RNCC: 3 | RNVC: 2
REDI-EDGE POCKET: RNCC: 5 | RNVC: 1

4 Nov 2003

5110-01-437-1955
File Handle

014371955
SGHF616AG: RNCC: 3 | RNVC: 2
HF616BL: RNCC: 5 | RNVC: 9
SGHF616G: RNCC: 5 | RNVC: 9

7 Oct 1996

5110-01-419-5283
Hand Metal Cutting Shears

014195283
86 1/2S: RNCC: 3 | RNVC: 2

25 Sep 1995

5110-01-462-9763
Exposed Blade Tube Deburring Tool

014629763
BS1010: RNCC: 3 | RNVC: 2
S10: RNCC: 5 | RNVC: 2

26 Feb 1999

5110-01-497-3601
Craftsman's Knife

014973601
10-418: RNCC: 3 | RNVC: 2
10-418: RNCC: 5 | RNVC: 2
45J360: RNCC: 5 | RNVC: 2

17 May 2002

5110-01-434-9506
Hand File

014349506
5110-01-434-9506: RNCC: 3 | RNVC: 2
08737: RNCC: 5 | RNVC: 1
MBF12: RNCC: 5 | RNVC: 2
08737: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-4057
Dimpling Die

014344057
AT254DA-8: RNCC: 3 | RNVC: 9
AT254DA-8: RNCC: C | RNVC: 1

29 Jul 1996

5110-01-141-8479
Diagonal Cutting Pliers

011418479
B107.500: RNCC: 3 | RNVC: 1
B107.11: RNCC: 5 | RNVC: 1
B107.11 TY1CL1: RNCC: 5 | RNVC: 1
B107.11 TY1CL1STC: RNCC: 5 | RNVC: 1
5758D14: RNCC: 5 | RNVC: 2
117CGV: RNCC: 5 | RNVC: 2
200SCEB: RNCC: 5 | RNVC: 9
1100-0202: RNCC: 5 | RNVC: 9
200-4SCEB: RNCC: 5 | RNVC: 9

7 Nov 1982

5110-00-624-3214
Hose Cover Stripping Tool Kit

006243214
FT1214-12: RNCC: 3 | RNVC: 2
F1785: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-078-3957
Hand Reamer

000783957
8769487: RNCC: 3 | RNVC: 2
4933000783957: RNCC: 5 | RNVC: 9
4933000783957: RNCC: 6 | RNVC: 9

1 Jan 1963

5110-01-288-3183
Knockout Punch And Die

012883183
ZT2978-3-16: RNCC: 3 | RNVC: 2

4 Nov 1988

5110-01-288-3446
Knockout Punch And Die

012883446
ZT1748-1-4: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-289-7038
Knockout Punch And Die

012897038
ZT2947-6: RNCC: 3 | RNVC: 2

28 Nov 1988

5110-01-497-6204
Hand Operated Cable Cutter

014976204
195: RNCC: 3 | RNVC: 2

28 May 2002

5110-01-327-6949
File Handle

013276949
GAS614: RNCC: 3 | RNVC: 9
0718 8103: RNCC: 5 | RNVC: 2

21 Oct 1990

5110-01-327-6128
Cylinder Ridge Reamer Speed Reducer

013276128
8228304: RNCC: 3 | RNVC: 2
8228304: RNCC: 5 | RNVC: 9

17 Oct 1990

5110-01-288-3449
Knockout Punch And Die

012883449
ZT1791-3-4: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-288-3462
Knockout Punch And Die

012883462
ZT2953-1-4: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-288-3479
Knockout Punch And Die

012883479
ZT3813-5-32: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-288-3453
Knockout Punch And Die

012883453
ZT1867-8: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-489-4519
Embroidery Scissors

014894519
386: RNCC: 3 | RNVC: 2

14 Sep 2001

5110-01-490-5663
Claw Hatchet

014905663
670: RNCC: 3 | RNVC: 2

1 Oct 2001

5110-01-452-2917
Pocket Folding Multi-Tool

014522917
3566-1 KUTMASTER: RNCC: 3 | RNVC: 2
MULTIMASTER/KUTMASTER: RNCC: 5 | RNVC: 1

22 Jan 1998

5110-01-288-2698
Diagonal Cutting Pliers

012882698
E711WR: RNCC: 3 | RNVC: 9

4 Nov 1988

5110-00-253-3157
Hand Reamer

002533157
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY2: RNCC: 5 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL2GRASZ4/0: RNCC: 5 | RNVC: 9
155-2-4/0: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-260-1646
Hand Reamer

002601646
B94.2: RNCC: 3 | RNVC: 1
712-046366: RNCC: 5 | RNVC: 2
C24537: RNCC: 5 | RNVC: 2
21248: RNCC: 5 | RNVC: 2
GGG-R-180: RNCC: 5 | RNVC: 9
A-A-2928: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
103HS 21/32 IN.: RNCC: 5 | RNVC: 9
101-0-0.6562: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-260-1715
Hand Reamer

002601715
B94.2: RNCC: 3 | RNVC: 1
101-0-0.9688: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
A-A-2928: RNCC: 5 | RNVC: 9
103HS 31/32 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-8479
Hand Reamer

005968479
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
125-2-0.3750: RNCC: 5 | RNVC: 9
GGG-R-180 TY2CL2GRB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-188-2955
Hand Reamer

011882955
RE2001: RNCC: 3 | RNVC: 2

31 Aug 1984

5110-27-019-2981
Hand File

270192981
10131ME1044: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-120-9058
Diagonal Cutting Pliers

151209058
341IS160: RNCC: 3 | RNVC: 2

4 Sep 1995

5110-99-874-2107

5110-14-318-2535

5110-99-874-2110

5110-01-351-0590
Craftsman's Knife Set

013510590
68-081: RNCC: 3 | RNVC: 2
X68B081: RNCC: 5 | RNVC: 9
68B081: RNCC: 5 | RNVC: 9

28 Dec 1991

5110-01-186-7746
Wire Wrapping Tool Bit

011867746
WB26M: RNCC: 3 | RNVC: 9
118-073: RNCC: 5 | RNVC: 2
Q125B219: RNCC: 5 | RNVC: 9
WB26M: RNCC: 5 | RNVC: 9
125B219: RNCC: 5 | RNVC: 9

14 Aug 1984

5110-01-144-0584
Hand Cable Stripper

011440584
KTJ113: RNCC: 3 | RNVC: 9

13 Dec 1982

5110-01-282-7658
Dimpling Die

012827658
AT207A-8-P: RNCC: 3 | RNVC: 2
AT207A-8-P: RNCC: 3 | RNVC: 9

22 Jul 1988

5110-01-198-7054
Knife Blade

011987054
XNB-205: RNCC: 3 | RNVC: 2
1N545130242: RNCC: 5 | RNVC: 2
48780: RNCC: 5 | RNVC: 2
48780: RNCC: 5 | RNVC: 9
XNB-205: RNCC: 5 | RNVC: 9

11 Jan 1985

5110-01-523-9990
Dimpling Die Body

015239990
ZT187301-1/4: RNCC: 3 | RNVC: 2

21 Sep 2004

5110-01-356-1008
Hand Hacksaw Blade

013561008
2A749: RNCC: 3 | RNVC: 9
HACKMASTER: RNCC: 5 | RNVC: 9

28 Mar 1992

5110-01-478-0870
Cutting Punch Insert

014780870
15-069: RNCC: 3 | RNVC: 2

30 Aug 2000

5110-01-520-9273
Hand File Set

015209273
4261A23: RNCC: 3 | RNVC: 2

2 Jun 2004

5110-01-122-1773
Metal Stud And Runner Shear

011221773
SRC24A: RNCC: 3 | RNVC: 2
SRC24A: RNCC: 5 | RNVC: 2
15 804: RNCC: 5 | RNVC: 9
15 804 H5: RNCC: 5 | RNVC: 9

15 Nov 1981

5110-01-585-2209
Hand File

015852209
03762: RNCC: 3 | RNVC: 2
03762: RNCC: 5 | RNVC: 9
03762: RNCC: 5 | RNVC: 9

19 May 2010

5110-01-531-7893
Tool-Socket

015317893
LA-RG660-1: RNCC: 3 | RNVC: 2

21 Jul 2005

5110-01-583-6737
Hand Cable Stripper

015836737
CPT-158U: RNCC: 3 | RNVC: 2

1 Apr 2010

5110-01-583-6701
Hand Cable Stripper

015836701
CPT-114U: RNCC: 3 | RNVC: 2
CPTL6: RNCC: 5 | RNVC: 9

1 Apr 2010

5110-01-530-2382
Hand Wire Stripper

015302382
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 37 TY1CL2: RNCC: 5 | RNVC: 1
45-2618: RNCC: 5 | RNVC: 2
45-2618: RNCC: 5 | RNVC: 2
B107.37: RNCC: 5 | RNVC: 9
B107.37 TY1CL2: RNCC: 5 | RNVC: 9

18 May 2005

5110-01-530-4370
Compass Saw Blade

015304370
49677: RNCC: 3 | RNVC: 2
D2004S: RNCC: 5 | RNVC: 2
D-1007: RNCC: 5 | RNVC: 9
32296: RNCC: 5 | RNVC: 9

26 May 2005

5110-01-301-2744
Cutting Punchplier

013012744
DIE1/8IN: RNCC: 3 | RNVC: 2

26 May 1989

5110-01-301-2753
Cutting Punchpliers

013012753
DIE1/4IN: RNCC: 3 | RNVC: 2

26 May 1989

5110-01-294-3900
Knockout Punch Die

012943900
1 4722: RNCC: 3 | RNVC: 2

16 Feb 1989

5110-01-469-0563
Single Bit Ax

014690563
A-5: RNCC: 3 | RNVC: 2
A-5FG: RNCC: 3 | RNVC: 2
A-5: RNCC: 5 | RNVC: 9

1 Nov 1999

5110-01-588-0528
Hand File Set

015880528
STL 56050071028: RNCC: 3 | RNVC: 2

30 Aug 2010

5110-01-589-1834
Pocket Knife

015891834
74-553: RNCC: 3 | RNVC: 2
74-553: RNCC: 5 | RNVC: 9

20 Oct 2010

5110-01-655-6306
Hand File

016556306
5NBA: RNCC: 3 | RNVC: 2

3 Jun 2016

5110-01-231-5718
Stripping Tool

012315718
901-D: RNCC: 3 | RNVC: 2
WS-5: RNCC: 5 | RNVC: 2
WS-5: RNCC: 5 | RNVC: 2

30 Apr 1986

5110-01-231-5717
Stripping Tool

012315717
901-C: RNCC: 3 | RNVC: 2
WS-4: RNCC: 5 | RNVC: 2
WS-4: RNCC: 5 | RNVC: 2

30 Apr 1986

5110-01-231-5716
Stripping Tool

012315716
901-B: RNCC: 3 | RNVC: 2
WS-3: RNCC: 5 | RNVC: 2
WS-3: RNCC: 5 | RNVC: 2

30 Apr 1986

5110-01-526-2051
Fireman's Strap Cutting Knife

015262051
K15550: RNCC: 3 | RNVC: 2

10 Dec 2004

5110-01-585-9847
Hand Operated Glass Cutting Machine

015859847
04-711: RNCC: 3 | RNVC: 2

15 Jun 2010

5110-00-932-5227
Hand Reamer

009325227
ST210: RNCC: 3 | RNVC: 2

17 Feb 1967

5110-01-342-9267
Exposed Blade Tube Deburring Tool

013429267
DB-14: RNCC: 3 | RNVC: 9

2 Aug 1991

5110-01-648-1610
Hand Wire Stripper

016481610
ACS-2: RNCC: 3 | RNVC: 2

16 Sep 2015

5110-01-643-4510
Hand File

016434510
17328: RNCC: 3 | RNVC: 2

1 Apr 2015

5110-01-644-4346
Hand Metal Stamping Die

016444346
20951AMP: RNCC: 3 | RNVC: 2
20951&: RNCC: 5 | RNVC: 9

5 May 2015

5110-01-210-6461
Bolt Cutter

012106461
0290FC: RNCC: 3 | RNVC: 2
0290FC: RNCC: 5 | RNVC: 9

15 Jun 1985

5110-01-578-5435
Fireman's Strap Cutting Knife

015785435
GERBER LMF II SAFETY KNIFE: RNCC: 3 | RNVC: 2
22-41629: RNCC: 5 | RNVC: 2

9 Oct 2009

5110-01-579-2555
Hand Wire Stripper

015792555
462PL348: RNCC: 3 | RNVC: 9

4 Nov 2009

5110-01-575-9148
Drill Reamer

015759148
3854AS400-6: RNCC: 3 | RNVC: 2
3854AS400-6: RNCC: 5 | RNVC: 2
3854AS400-6: RNCC: 5 | RNVC: 2
3854AS400-6: RNCC: 5 | RNVC: 2
3854AS400-6: RNCC: 5 | RNVC: 2
3854AS400-6: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-334-9868
Scraping Knife

013349868
CSB10C: RNCC: 3 | RNVC: 2
CSB10B: RNCC: 5 | RNVC: 9
CSB10A: RNCC: 5 | RNVC: 9

5 Mar 1991

5110-01-336-5726
Electricians' Scissors

013365726
175-E: RNCC: 3 | RNVC: 2
175-E: RNCC: 5 | RNVC: 9

27 Mar 1991

5110-01-604-4734
Gasket Cutting Punch

016044734
FRS PGH8-6: RNCC: 3 | RNVC: 2

6 Apr 2012

5110-01-575-9132
Drill Reamer

015759132
3854AS400-21: RNCC: 3 | RNVC: 2
3854AS400-21: RNCC: 5 | RNVC: 2
3854AS400-21: RNCC: 5 | RNVC: 2
3854AS400-21: RNCC: 5 | RNVC: 2
3854AS400-21: RNCC: 5 | RNVC: 2
3854AS400-21: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9153
Piloted Reamer

015759153
3854AS300-23: RNCC: 3 | RNVC: 2
3854AS300-23: RNCC: 5 | RNVC: 2
3854AS300-23: RNCC: 5 | RNVC: 2
3854AS300-23: RNCC: 5 | RNVC: 2
3854AS300-23: RNCC: 5 | RNVC: 2
3854AS300-23: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9157
Drill Reamer

015759157
3854AS400-7: RNCC: 3 | RNVC: 2
3854AS400-7: RNCC: 5 | RNVC: 2
3854AS400-7: RNCC: 5 | RNVC: 2
3854AS400-7: RNCC: 5 | RNVC: 2
3854AS400-7: RNCC: 5 | RNVC: 2
3854AS400-7: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9136
Drill Reamer

015759136
3854AS400-23: RNCC: 3 | RNVC: 2
3854AS400-23: RNCC: 5 | RNVC: 2
3854AS400-23: RNCC: 5 | RNVC: 2
3854AS400-23: RNCC: 5 | RNVC: 2
3854AS400-23: RNCC: 5 | RNVC: 2
3854AS400-23: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9106
Piloted Reamer

015759106
3854AS300-30: RNCC: 3 | RNVC: 2
3854AS300-30: RNCC: 5 | RNVC: 2
3854AS300-30: RNCC: 5 | RNVC: 2
3854AS300-30: RNCC: 5 | RNVC: 2
3854AS300-30: RNCC: 5 | RNVC: 2
3854AS300-30: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9135
Drill Reamer

015759135
3854AS400-25: RNCC: 3 | RNVC: 2
3854AS400-25: RNCC: 5 | RNVC: 2
3854AS400-25: RNCC: 5 | RNVC: 2
3854AS400-25: RNCC: 5 | RNVC: 2
3854AS400-25: RNCC: 5 | RNVC: 2
3854AS400-25: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9123
Piloted Reamer

015759123
3854AS300-36: RNCC: 3 | RNVC: 2
3854AS300-36: RNCC: 5 | RNVC: 2
3854AS300-36: RNCC: 5 | RNVC: 2
3854AS300-36: RNCC: 5 | RNVC: 2
3854AS300-36: RNCC: 5 | RNVC: 2
3854AS300-36: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-603-7184
Hand Cable Stripper

016037184
38590: RNCC: 3 | RNVC: 2
DDT-596/11: RNCC: 5 | RNVC: 2

12 Mar 2012

5110-01-341-1064
Pliers

013411064
155SEB: RNCC: 3 | RNVC: 2
91628884: RNCC: 5 | RNVC: 2
155SEB: RNCC: 5 | RNVC: 9

25 Jun 1991

5110-01-341-1035
Hand Wire Stripper

013411035
413SEB: RNCC: 3 | RNVC: 2
91628888: RNCC: 5 | RNVC: 2
48916: RNCC: 5 | RNVC: 2
413SEB: RNCC: 5 | RNVC: 9
48916: RNCC: 5 | RNVC: 9

25 Jun 1991

5110-01-599-9290
Pipe Cutter

015999290
70060: RNCC: 3 | RNVC: 2
ENORM 4: RNCC: 5 | RNVC: 2
391219100307: RNCC: 6 | RNVC: 9

28 Oct 2011

5110-01-040-6136
Embroidery Scissors

010406136
112B060: RNCC: 3 | RNVC: 2
GGG-S-278: RNCC: 4 | RNVC: 1
GGG-S-278 TY2CL1SZ5: RNCC: 5 | RNVC: 1
112B060: RNCC: 5 | RNVC: 9
AA112B060: RNCC: 5 | RNVC: 9
T60: RNCC: 5 | RNVC: 9
104AJ: RNCC: 5 | RNVC: 9
T60M: RNCC: 5 | RNVC: 9

11 May 1977

5110-01-600-3068
Hand Operated Cable Cutter

016003068
DSI-110-0139: RNCC: 3 | RNVC: 2
DSI-110-0139: RNCC: 3 | RNVC: 2
DSI-110-0139: RNCC: 5 | RNVC: 9

22 Nov 2011

5110-00-388-3367
Hand File

003883367
DWG5110-00-388-3367: RNCC: 3 | RNVC: 2
KS2663L1: RNCC: 5 | RNVC: 9
SPECKS2662: RNCC: 5 | RNVC: 9
SPECKS2662: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-335-1521
Hand Cable Stripper

013351521
PWC32: RNCC: 3 | RNVC: 9

6 Mar 1991

5110-01-289-6734
Hand File

012896734
HB2088: RNCC: 3 | RNVC: 9

28 Nov 1988

5110-01-289-7034
Dimpling Die

012897034
ZT3868-6: RNCC: 3 | RNVC: 2

28 Nov 1988

5110-01-291-3568
Inclosed Blade Tube Deburring Tool

012913568
07445600: RNCC: 3 | RNVC: 9

28 Dec 1988

5110-01-597-4954
Hand Cable Stripper

015974954
45-402: RNCC: 3 | RNVC: 2

9 Jun 2011

5110-01-597-0023
Hand Wire Stripper

015970023
EWS600-28: RNCC: 3 | RNVC: 2

25 May 2011

5110-01-596-9336
Hand Operated Glass Cutting Machine

015969336
04-720: RNCC: 3 | RNVC: 2

25 May 2011

5110-01-335-0614
Hand Cape Chisel

013350614
B107.410: RNCC: 3 | RNVC: 1
B107.48 TY1CL1: RNCC: 5 | RNVC: 1
B107.48: RNCC: 5 | RNVC: 1
33-151: RNCC: 5 | RNVC: 2
33-151: RNCC: 5 | RNVC: 9

5 Mar 1991

5110-01-335-1598
Hand File

013351598
14V12: RNCC: 3 | RNVC: 2

6 Mar 1991

5110-01-459-2730
Parting Tool

014592730
43-711-00: RNCC: 3 | RNVC: 2

25 Sep 1998

5110-01-189-6370
Hand File Set

011896370
HBM40L: RNCC: 3 | RNVC: 2

18 Sep 1984

5110-01-301-3583
Ratchet Bit Brace

013013583
5044: RNCC: 3 | RNVC: 2

27 May 1989

5110-01-301-6383
Cutter Base

013016383
15162-001: RNCC: 3 | RNVC: 2

2 Jun 1989

5110-01-246-6114
Hand File Set

012466114
11299: RNCC: 3 | RNVC: 2
11299: RNCC: 5 | RNVC: 2

17 Dec 1986

5110-01-592-4449
Wire Cutter Bl Hook

015924449
3879032C2: RNCC: 3 | RNVC: 2
3879032C1: RNCC: 5 | RNVC: 9

7 Mar 2011

5110-00-366-1471
Reamer

003661471
8194040: RNCC: 3 | RNVC: 2
8069999: RNCC: 5 | RNVC: 9
8194040: RNCC: 5 | RNVC: 9
8069999: RNCC: 5 | RNVC: 9

1 Jan 1960

5110-01-142-0078
Hand Cable Notcher

011420078
3557: RNCC: 3 | RNVC: 9
3557: RNCC: 5 | RNVC: 9
7010318955: RNCC: C | RNVC: 1

9 Nov 1982

5110-01-590-1165
Circle Cutter

015901165
1350: RNCC: 3 | RNVC: 1

18 Nov 2010

5110-01-590-4012
Hand Metal Cutting Shears

015904012
53-70453: RNCC: 3 | RNVC: 2

3 Dec 2010

5110-01-549-3021
Hand Optical Fiber Cleaving Tool

015493021
58925-500: RNCC: 3 | RNVC: 2

15 Mar 2007

5110-01-299-0631
Knockout Punch And Die

012990631
2 8156/2 8157: RNCC: 3 | RNVC: 2

25 Apr 1989

5110-01-621-5253
Craftsman's Knife

016215253
5110-00-NIB-0050: RNCC: 3 | RNVC: 2
2263-3-5: RNCC: 3 | RNVC: 2
510009301N: RNCC: 3 | RNVC: 2
180MP: RNCC: 5 | RNVC: 2

10 Sep 2013

5110-01-376-7360
Knife Blade

013767360
X163: RNCC: 3 | RNVC: 9

7 Jun 1993

5110-01-596-9946
Hand File

015969946
HBF4W: RNCC: 3 | RNVC: 2

25 May 2011

5110-01-597-7803
Paper Cutter

015977803
F250: RNCC: 3 | RNVC: 2
22-25-00-00005: RNCC: 5 | RNVC: 2

20 Jun 2011

5110-01-240-6689
Hand Reamer

012406689
8326062-01: RNCC: 3 | RNVC: 2

16 Sep 1986

5110-01-616-1354
Pocket Folding Multi-Tool

016161354
AMTC-M2084: RNCC: 3 | RNVC: 2

4 Feb 2013

5110-01-373-2532
Wire Stripper Blade Set

013732532
AS5768: RNCC: 3 | RNVC: 1
45-1611-1: RNCC: 3 | RNVC: 2
AS5768/1-B5: RNCC: 5 | RNVC: 1

31 Mar 1993

5110-01-594-8613
Floor Scraper

015948613
HEX17CBDCLT: RNCC: 3 | RNVC: 2

25 Apr 2011

5110-01-592-4447
Wire Cutter Kit

015924447
3878345C92: RNCC: 3 | RNVC: 2
3878345C91: RNCC: 5 | RNVC: 9

7 Mar 2011

5110-01-593-1818
Craftsman's Knife

015931818
HCS2036-01-039: RNCC: 3 | RNVC: 2

4 Apr 2011

5110-01-593-1825
Hand Metal Cutting Shears

015931825
HCS2036-06-011B: RNCC: 3 | RNVC: 2

4 Apr 2011

5110-01-612-1478
Hand Reamer

016121478
1219-129: RNCC: 3 | RNVC: 2

3 Oct 2012

5110-01-369-0650
Hand Cape Chisel

013690650
B107.410: RNCC: 3 | RNVC: 1
B107.48: RNCC: 5 | RNVC: 1
B107.48 TY1CL1: RNCC: 5 | RNVC: 1
10402 MAYHEW: RNCC: 5 | RNVC: 2
10402: RNCC: 5 | RNVC: 2

13 Dec 1992

5110-01-369-0646
Hand Cold Chisel

013690646
B107.410: RNCC: 3 | RNVC: 1
B107.48: RNCC: 5 | RNVC: 1
B107.48 TY1CL2: RNCC: 5 | RNVC: 1
10211 MAYHEW: RNCC: 5 | RNVC: 2
10211: RNCC: 5 | RNVC: 2

13 Dec 1992

5110-00-730-5886
Hand Reamer

007305886
7305886: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-364-6772
Corner Bit Brace

013646772
969C563-1: RNCC: 3 | RNVC: 2
969C563-1: RNCC: 5 | RNVC: 9

23 Sep 1992

5110-01-437-9019
Thermal Wire Stripper

014379019
4C-HOTWEEZER: RNCC: 3 | RNVC: 2
CN 403/4C: RNCC: 5 | RNVC: 2
4C-HOTWEEZER: RNCC: 5 | RNVC: 2

25 Oct 1996

5110-01-495-3106
Hand Reamer Set

014953106
3268588: RNCC: 3 | RNVC: 2

12 Mar 2002

5110-00-854-3414
Cork Borer Sharpener

008543414
7-865: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-01-606-5269
Exposed Blade Tube Deburring Tool

016065269
64127: RNCC: 3 | RNVC: 2

18 May 2012

5110-01-265-2552
Hand Metal Cutting Shears

012652552
A-13: RNCC: 3 | RNVC: 2
A-13: RNCC: 3 | RNVC: 9
58049: RNCC: 5 | RNVC: 2
GGG-S-291 TY2CL1STBSZ7: RNCC: 5 | RNVC: 9
GGG-S-291: RNCC: 5 | RNVC: 9
58049: RNCC: 5 | RNVC: 9

10 Oct 1987

5110-01-257-9903
Hand Wire Stripper

012579903
SAS2812: RNCC: 3 | RNVC: 2
48938: RNCC: 5 | RNVC: 2
SAS-2812: RNCC: 5 | RNVC: 9
48938: RNCC: 5 | RNVC: 9

26 Jun 1987

5110-01-571-4725
Chisel Bar

015714725
566643-01: RNCC: 3 | RNVC: 2
580095-01 REF 20: RNCC: 5 | RNVC: 1

4 Feb 2009

5110-01-434-9812
Hand File

014349812
03599: RNCC: 3 | RNVC: 1
03599: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-431-0309
Thread Restorer File

014310309
TR2: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-543-1955
Bearing Removal Tool Cutter

015431955
RKC4103-5CUT: RNCC: 3 | RNVC: 2

31 Aug 2006

5110-01-566-3682
Folding Saw

015663682
20997: RNCC: 3 | RNVC: 9
3GPC4: RNCC: 5 | RNVC: 2
502-844: RNCC: 5 | RNVC: 2
502-844: RNCC: 5 | RNVC: 9

28 Aug 2008

5110-01-430-5053
Pocket Folding Multi-Tool

014305053
61030101: RNCC: 3 | RNVC: 2
PST/SS/LEATHER: RNCC: 5 | RNVC: 2

30 Apr 1996

5110-01-430-6839
Hand File Set

014306839
S477: RNCC: 3 | RNVC: 2
42319: RNCC: 5 | RNVC: 2
S477: RNCC: 5 | RNVC: 9

2 May 1996

5110-01-431-0651
Assorted Punch Set

014310651
SBP3PT: RNCC: 3 | RNVC: 2

7 May 1996

5110-01-431-0981
Wood Chisel Set

014310981
B107.410: RNCC: 3 | RNVC: 1
B107.44: RNCC: 5 | RNVC: 1
1434C: RNCC: 5 | RNVC: 9

7 May 1996

5110-01-563-9472
Hand File

015639472
21701HN: RNCC: 3 | RNVC: 2
21701H: RNCC: 5 | RNVC: 9
21701H: RNCC: 5 | RNVC: 9

30 May 2008

5110-01-428-5228
Craftsman's Knife

014285228
10-509: RNCC: 3 | RNVC: 2
1HH72: RNCC: 5 | RNVC: 2
10-509: RNCC: 5 | RNVC: 2

27 Mar 1996

5110-01-429-5258
Edge Cutting Trimming Tool

014295258
5G8267: RNCC: 3 | RNVC: 2

12 Apr 1996

5110-01-429-7409
Craftsman's Knife

014297409
YA405A: RNCC: 3 | RNVC: 2
YA405A: RNCC: 5 | RNVC: 2
YA405: RNCC: 5 | RNVC: 9
5110PL1679275: RNCC: 6 | RNVC: 9

17 Apr 1996

5110-01-537-2586
Pocket Knife

015372586
37015A14: RNCC: 3 | RNVC: 2

1 Feb 2006

5110-01-543-1959
Bearing Removal Tool Cutter

015431959
RKC4103-8CUT: RNCC: 3 | RNVC: 2

31 Aug 2006

5110-01-541-8466
Wire Stripper Blade Set

015418466
45-2114-1: RNCC: 3 | RNVC: 2

12 Jul 2006

5110-01-542-4510
Hand Reamer

015424510
9727047-01: RNCC: 3 | RNVC: 2

7 Aug 2006

5110-01-540-1142
Bushin Removal Tool

015401142
5HG90819-113: RNCC: 3 | RNVC: 2

9 May 2006

5110-01-531-7880
Tool-Initiator Cock

015317880
LA-RG646-1: RNCC: 3 | RNVC: 2

21 Jul 2005

5110-01-531-7911
Tool-Wrench-Tlg

015317911
LA-RG86: RNCC: 3 | RNVC: 2

21 Jul 2005

5110-01-532-6371
Hand Reamer

015326371
FTSR-3-0-2-C: RNCC: 3 | RNVC: 2

15 Aug 2005

5110-01-367-3844
Pliers

013673844
E714CG: RNCC: 3 | RNVC: 2
E714: RNCC: 5 | RNVC: 9

10 Nov 1992

5110-01-362-2226
Reamer

013622226
64875: RNCC: 3 | RNVC: 2

3 Aug 1992

5110-01-365-8467
Hand File

013658467
73-23200: RNCC: 3 | RNVC: 2

15 Oct 1992

5110-01-536-5064
Pocket Knife

015365064
6813K: RNCC: 3 | RNVC: 9
RYAN MODEL 7 LINERLOCK: RNCC: 5 | RNVC: 9
6813K: RNCC: 5 | RNVC: 9
RYAN MODEL 7 LINERLOCK: RNCC: C | RNVC: 1

5 Jan 2006

5110-01-115-9222
Hand File

011159222
5110-01-115-9222: RNCC: 3 | RNVC: 2
GGG-F-325 TY18CL2: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
69826: RNCC: 5 | RNVC: 9
62888: RNCC: 5 | RNVC: 9

17 Jul 1981

5110-01-115-1181
Shingling Hatchet

011151181
B107.400: RNCC: 3 | RNVC: 1
11558: RNCC: 3 | RNVC: 2
B107.400 CAT 42 TY1CL1: RNCC: 5 | RNVC: 1
11558: RNCC: 5 | RNVC: 9
09 204 H7: RNCC: 5 | RNVC: 9

28 Jun 1981

5110-00-735-5872
Carbon Scraper

007355872
7355872: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-490-4474
Shear-Bent Handle U

004904474
29: RNCC: 3 | RNVC: 9

1 Jan 1961

5110-01-053-0573
Hand File

010530573
A-A-2307: RNCC: 4 | RNVC: 1
00024: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
00024: RNCC: 5 | RNVC: 9
GGG-F-325 TY1CL1: RNCC: 5 | RNVC: 9

24 Dec 1977

5110-01-531-7909
Tool-Mlg-Wrench

015317909
LA-RG81-4: RNCC: 3 | RNVC: 2

21 Jul 2005

5110-00-884-6292
Forming Punch

008846292
HS9273: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-01-529-1313
Knife Electricians

015291313
758IE1550: RNCC: 3 | RNVC: 2
758IE1550: RNCC: 3 | RNVC: 2

5 Apr 2005

5110-01-302-3378
Cylinder Ridge Reamer

013023378
16V11684: RNCC: 3 | RNVC: 2

13 Jun 1989

5110-01-615-9133
Wire Stripper Blade Set

016159133
45-2564-1: RNCC: 3 | RNVC: 2

27 Jan 2013

5110-01-612-4653
Hand Cable Stripper

016124653
1820: RNCC: 3 | RNVC: 2
0700-1240: RNCC: 3 | RNVC: 2

11 Oct 2012

5110-01-612-1483
Hand Reamer

016121483
1219-156: RNCC: 3 | RNVC: 2

3 Oct 2012

5110-01-328-7658
Hand Wire Stripper

013287658
103SV: RNCC: 3 | RNVC: 2
48360: RNCC: 5 | RNVC: 2
48360: RNCC: 5 | RNVC: 9
103S: RNCC: 5 | RNVC: 9
103S: RNCC: 5 | RNVC: 9

6 Nov 1990

5110-01-610-3469
Cable Stripper Blade Set

016103469
G2-1602: RNCC: 3 | RNVC: 2

15 Aug 2012

5110-01-117-1715
Bearing Hold Cutter

011171715
8041762: RNCC: 3 | RNVC: 2
8041762: RNCC: 5 | RNVC: 9

9 Aug 1981

5110-01-080-5485
Dimpling Punch

010805485
ZT1751-3/16: RNCC: 3 | RNVC: 2

27 Jul 1979

5110-01-077-8863
Dimpling Die

010778863
ZT1752-1-8: RNCC: 3 | RNVC: 2

1 Jun 1979

5110-01-606-2181
Hand Operated Tile Cutter

016062181
10-918: RNCC: 3 | RNVC: 2

11 May 2012

5110-00-596-9323
Breast Drill

005969323
5110-00-596-9323: RNCC: 3 | RNVC: 2
GGG-D-651: RNCC: 5 | RNVC: 9
A-A-2553: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-074-9051
Honeycom Cutter Kit

010749051
HCC-16024: RNCC: 3 | RNVC: 2
HC4500-3: RNCC: 5 | RNVC: 9
5110PL0913763: RNCC: 6 | RNVC: 9

10 Apr 1979

5110-00-595-8296
Hand File

005958296
A-A-2308: RNCC: 4 | RNVC: 1
GGG-F-325 TY2CL1: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-595-9499
Knockout Punch And Die

005959499
GGG-P-836: RNCC: 4 | RNVC: 1
5110-00-595-9499: RNCC: 5 | RNVC: 1
GGG-P-836 TY2: RNCC: 5 | RNVC: 1
735 1-11/32: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-596-1132
Hand Reamer

005961132
B94.2: RNCC: 3 | RNVC: 1
761-1030-000: RNCC: 3 | RNVC: 9
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
103RB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-8493
Hand Reamer

005968493
B94.2: RNCC: 3 | RNVC: 1
764-1250-000: RNCC: 3 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
125RL: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-2488
Hand Reamer

005962488
53C20381-8740: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-596-2870
Hand Reamer

005962870
B94.2: RNCC: 3 | RNVC: 1
761-0530-000: RNCC: 3 | RNVC: 9
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
53RB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-4357
Hand Reamer

005964357
53C20381-6240: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-596-4366
Hand Reamer

005964366
53C20381-2490: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-01-655-7364
Knockout Punch And Die

016557364
BMP-18: RNCC: 3 | RNVC: 2

7 Jun 2016

5110-01-654-6597
Hand File

016546597
1-100-10-3-0: RNCC: 3 | RNVC: 2

4 May 2016

5110-01-078-7863
Locknut Crimper

010787863
6798927-4: RNCC: 3 | RNVC: 2

20 Jun 1979

5110-01-492-9391
Hand Reamer

014929391
9C3678: RNCC: 3 | RNVC: 2

17 Dec 2001

5110-01-492-8372
Hand Reamer

014928372
C15138-190C: RNCC: 3 | RNVC: 2

13 Dec 2001

5110-01-652-1993
Crosscut Hand Saw

016521993
SS179: RNCC: 3 | RNVC: 1

11 Feb 2016

5110-00-900-4245
Hand File

009004245
21118: RNCC: 3 | RNVC: 2
81-13950: RNCC: 5 | RNVC: 2
21118: RNCC: 5 | RNVC: 9
53067: RNCC: 5 | RNVC: 9

1 Jan 1960

5110-01-649-6536
Hand File

016496536
1-143-12-3-0: RNCC: 3 | RNVC: 2
ZHVY0076: RNCC: 5 | RNVC: 9
ZLW0093: RNCC: 5 | RNVC: 9

5 Nov 2015

5110-01-649-6530
Hand File

016496530
1-143-12-2-0: RNCC: 3 | RNVC: 2
ZHVY0077: RNCC: 5 | RNVC: 9
ZLW0094: RNCC: 5 | RNVC: 9

5 Nov 2015

5110-00-801-1430
Hand Reamer

008011430
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
140RB: RNCC: 5 | RNVC: 9
761-1400-000: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-01-646-6366
Scraping Knife

016466366
235078: RNCC: 3 | RNVC: 2
235078: RNCC: 5 | RNVC: 2

27 Jul 2015

5110-01-649-6529
Hand File

016496529
1-170-10-2-0: RNCC: 3 | RNVC: 2
ZHVY0079: RNCC: 5 | RNVC: 2
ZLW0096: RNCC: 5 | RNVC: 2

5 Nov 2015

5110-01-046-5081
Hand Wire Stripper

010465081
NN025: RNCC: 3 | RNVC: 2
NO-NIK: RNCC: 5 | RNVC: 1
118-815: RNCC: 5 | RNVC: 2
NN025: RNCC: 5 | RNVC: 9
NO-NIK: RNCC: 5 | RNVC: 9

19 Aug 1977

5110-01-046-5080
Hand Wire Stripper

010465080
NN034: RNCC: 3 | RNVC: 2
NO-NIK: RNCC: 5 | RNVC: 1
NN034: RNCC: 5 | RNVC: 9
NO-NIK: RNCC: 5 | RNVC: 9

19 Aug 1977

5110-00-899-9738
Hand Reamer

008999738
1365-626-27PC8749: RNCC: 3 | RNVC: 2
1365-626-27PC8749: RNCC: 5 | RNVC: 2

1 Jan 1960

5110-01-644-0393
Hand Metal Stamping Die

016440393
20951A: RNCC: 3 | RNVC: 2

20 Apr 2015

5110-01-646-1204
Coping Saw

016461204
A601451: RNCC: 3 | RNVC: 2
A601451: RNCC: 3 | RNVC: 9

14 Jul 2015

5110-01-646-1077
Knockout Punch And Die

016461077
125T015-040C: RNCC: 3 | RNVC: 2

13 Jul 2015

5110-01-300-7616
Hand Optical Fiber Cleaving Tool

013007616
927-1051: RNCC: 3 | RNVC: 2

18 May 1989

5110-01-644-0394
Hand Metal Stamping Die

016440394
20951B: RNCC: 3 | RNVC: 2

20 Apr 2015

5110-01-642-5807
Hand Operated Cable Cutter

016425807
844PL8160: RNCC: 3 | RNVC: 2

3 Mar 2015

5110-01-643-3273
Hand Cold Chisel

016433273
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1
J86A5/16: RNCC: 5 | RNVC: 2
B107.48: RNCC: 5 | RNVC: 9
B107.48 TY1CL2: RNCC: 5 | RNVC: 9

30 Mar 2015

5110-01-032-7674
Pipe Cutter

010327674
8605-061: RNCC: 3 | RNVC: 2

21 Dec 1976

5110-00-596-4491
Hand Reamer

005964491
64678-3: RNCC: 3 | RNVC: 2

1 Jan 1961

5110-01-640-8424
Hand Rivet Buster Chisel

016408424
TX-1336R8: RNCC: 3 | RNVC: 2

29 Dec 2014

5110-01-288-2601
Hand Reamer

012882601
5P7331: RNCC: 3 | RNVC: 2

4 Nov 1988

5110-01-288-3480
Knockout Punch And Die

012883480
ZT3846-10: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-288-3471
Knockout Punch And Die

012883471
ZT2978-1-8: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-288-3452
Knockout Punch And Die

012883452
ZT1855-3-16: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-267-8454
Bearing Scraper

012678454
4550-03975-312: RNCC: 3 | RNVC: 2
4550-03975-312: RNCC: 5 | RNVC: 9

18 Nov 1987

5110-00-968-9073
Cutter

009689073
PWA16672: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-01-437-1922
File Handle

014371922
SGHF614AG: RNCC: 3 | RNVC: 2
SGHF614G: RNCC: 5 | RNVC: 9
HF614BL: RNCC: 5 | RNVC: 9

7 Oct 1996

5110-01-633-8990
Scraper Blade

016338990
AL-38017: RNCC: 3 | RNVC: 2

9 Dec 2014

5110-01-066-7545
Diagonal Cutting Pliers

010667545
MS54-3: RNCC: 3 | RNVC: 9

18 Oct 1978

5110-01-480-9782
Pocket Knife

014809782
RESCUE C14: RNCC: 3 | RNVC: 2

13 Dec 2000

5110-01-434-9459
Diagonal Cutting Pliers

014349459
933-6: RNCC: 3 | RNVC: 2
933-6: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9319
Hand File

014349319
08925: RNCC: 3 | RNVC: 2
08925: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9317
Diagonal Cutting Pliers

014349317
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 11 TY1CL1: RNCC: 5 | RNVC: 1
55CG: RNCC: 5 | RNVC: 2
B107.11: RNCC: 5 | RNVC: 9
B107.11 TY1CL1STA: RNCC: 5 | RNVC: 9
55CG: RNCC: 5 | RNVC: 9
B107.11 TY1CL1: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-005-4879
Dimpling Die

010054879
ZT1860-5-16-24: RNCC: 3 | RNVC: 2

24 Jun 1975

5110-01-004-5964
Die Assembly Ram

010045964
ZT186002-5-16-24: RNCC: 3 | RNVC: 2

10 Jun 1975

5110-01-467-7429
Hand File

014677429
14942: RNCC: 3 | RNVC: 2
14942: RNCC: 5 | RNVC: 9

13 Sep 1999

5110-00-602-5426
Pressure Gun Cl Rod

006025426
7415: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-01-175-0283
Gasket Cutting Punch Mandrel

011750283
PGH8-1: RNCC: 3 | RNVC: 2
FRS PGH8-1: RNCC: 5 | RNVC: 9

26 Mar 1984

5110-01-629-6579
Hand Metal Cutting Shears

016296579
5110-00-NIB-0067: RNCC: 3 | RNVC: 2
510000502N: RNCC: 3 | RNVC: 2
ACM 14850: RNCC: 5 | RNVC: 2

10 Jul 2014

5110-01-630-3993
Knockout Punch And Die Set

016303993
7906SB: RNCC: 3 | RNVC: 2

4 Aug 2014

5110-01-630-8783
Hand Metal Cutting Shears

016308783
758IE5102: RNCC: 3 | RNVC: 2

21 Aug 2014

5110-01-430-8624
Thread Restorer File

014308624
2228: RNCC: 3 | RNVC: 2
2228: RNCC: 3 | RNVC: 9

3 May 1996

5110-01-430-7442
Craftsman's Knife

014307442
31-100: RNCC: 3 | RNVC: 9
31-100: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8507
Hand Hacksaw Blade

014308507
61232: RNCC: 3 | RNVC: 2
61232: RNCC: 3 | RNVC: 9
61232: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-431-0976
Hand Operated Cable Cutter

014310976
45-6N: RNCC: 3 | RNVC: 2

7 May 1996

5110-01-431-0286
Thread Restorer File

014310286
TR1: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-628-6260
Flexible Carbon Scraper

016286260
29892: RNCC: 3 | RNVC: 2
10482027: RNCC: 6 | RNVC: 9

4 Jun 2014

5110-01-629-6575
Hand Metal Cutting Shears

016296575
5110-00-NIB-0041: RNCC: 3 | RNVC: 2
510000402N: RNCC: 3 | RNVC: 2
ACM 13529: RNCC: 5 | RNVC: 2

10 Jul 2014

5110-01-627-1052
Fireman's Strap Cutting Knife

016271052
K2003K: RNCC: 3 | RNVC: 2

2 Apr 2014

5110-01-368-4047
Hand Cold Chisel

013684047
LC206M: RNCC: 3 | RNVC: 2

1 Dec 1992

5110-01-625-8287
Knockout Punch And Die Set

016258287
MP4140: RNCC: 3 | RNVC: 2

18 Feb 2014

5110-01-362-2222
Reamer

013622222
64820: RNCC: 3 | RNVC: 2

3 Aug 1992

5110-01-359-6103
Hand Metal Cutting Punch And Die Set

013596103
5 SIZE 5/32: RNCC: 3 | RNVC: 2

10 Jun 1992

5110-00-394-5512
Pointer Reamer

003945512
404X84: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-01-625-1166
Glass Cutter

016251166
01-128: RNCC: 3 | RNVC: 2

26 Jan 2014

5110-01-425-2029
Hand Wire Stripper

014252029
001-101-1: RNCC: 3 | RNVC: 2

14 Feb 1996

5110-01-385-7401
Pocket Folding Multi-Tool

013857401
A100C: RNCC: 3 | RNVC: 2

18 Jan 1994

5110-00-420-6522
Indica Removal Tool

004206522
4905-00003: RNCC: 3 | RNVC: 2
4S94468-101A: RNCC: 5 | RNVC: 2

7 Mar 1969

5110-01-159-1807
Sungear Bushing Reamer Shaft Pilot

011591807
J-28489-1: RNCC: 3 | RNVC: 2
2DL442: RNCC: 5 | RNVC: 2
2DL442: RNCC: 5 | RNVC: 9
2AH913: RNCC: 5 | RNVC: 9

4 Aug 1983

5110-01-622-4025
Pocket Folding Multi-Tool

016224025
830846: RNCC: 3 | RNVC: 2

7 Oct 2013

5110-01-621-0810
Diagonal Cutting Pliers

016210810
FA-192.14VE: RNCC: 3 | RNVC: 2

22 Aug 2013

5110-01-377-2274
Hand Cable Stripper

013772274
45-128: RNCC: 3 | RNVC: 2
45-128: RNCC: 3 | RNVC: 2

9 Jul 1993

5110-00-542-2043
Knife Blade

005422043
X210: RNCC: 3 | RNVC: 2
X10: RNCC: 5 | RNVC: 9
10: RNCC: 5 | RNVC: 9
X10: RNCC: 5 | RNVC: 9
X210: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-542-4852
End Cutting Nippers

005424852
B107.500: RNCC: 3 | RNVC: 1
5110-00-542-4852: RNCC: 5 | RNVC: 1
B107.500 CAT 11 TY4CL1: RNCC: 5 | RNVC: 1
00945667000: RNCC: 5 | RNVC: 2
45667: RNCC: 5 | RNVC: 2
GGG-N-350: RNCC: 5 | RNVC: 9
B107.11: RNCC: 5 | RNVC: 9
B107.11 TY4STA: RNCC: 5 | RNVC: 9
GGG-N-350 TY4STA: RNCC: 5 | RNVC: 9
9-45667: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-151-2223
Scraper Blade

011512223
1222-152: RNCC: 3 | RNVC: 2

14 Apr 1983

5110-01-572-2622
Hand Optical Fiber Cleaving Tool

015722622
FBC-015: RNCC: 3 | RNVC: 9

5 Mar 2009

5110-01-086-4141
Wire Stripper Blade

010864141
L4422: RNCC: 3 | RNVC: 2

28 Nov 1979

5110-01-118-6284
Hand Metal Cutting Shears

011186284
P6510S: RNCC: 3 | RNVC: 2
M3R: RNCC: 3 | RNVC: 2
WIS M3R: RNCC: 5 | RNVC: 2
M3R: RNCC: 5 | RNVC: 9

7 Sep 1981

5110-01-383-4892
Axe

013834892
08-34-027: RNCC: 3 | RNVC: 2

24 Nov 1993

5110-01-532-6379
Hand Reamer

015326379
FTSR-4-0-2-C: RNCC: 3 | RNVC: 2

15 Aug 2005

5110-01-577-7584
Craftsman's Knife

015777584
42048: RNCC: 3 | RNVC: 2
79DH333-00: RNCC: 3 | RNVC: 2
3815A65: RNCC: 5 | RNVC: 2
3815A65: RNCC: 5 | RNVC: 2

16 Sep 2009

5110-01-579-2554
Hand Wire Stripper

015792554
45-215: RNCC: 3 | RNVC: 2

4 Nov 2009

5110-01-543-1961
Bearing Removal Tool Cutter

015431961
RKC4103-12CUT: RNCC: 3 | RNVC: 2

31 Aug 2006

5110-01-398-2418
Hand Operated Cable Cutter

013982418
900200: RNCC: 3 | RNVC: 2
1819.1: RNCC: 3 | RNVC: 2
KT45: RNCC: 5 | RNVC: 9
PA1818: RNCC: 5 | RNVC: 9
1818: RNCC: 5 | RNVC: 9

27 Oct 1994

5110-01-380-9351
Cable Stripper Blade Set

013809351
L-9226: RNCC: 3 | RNVC: 2
L-9226: RNCC: 3 | RNVC: 2
L-9226: RNCC: 5 | RNVC: 2
L-9226: RNCC: 5 | RNVC: 9

30 Sep 1993

5110-01-396-9409
Hand Bushing Splitting Tool

013969409
C902013: RNCC: 3 | RNVC: 2
C902013: RNCC: 5 | RNVC: 9

29 Sep 1994

5110-01-045-4993
Blower Cleaner Tool

010454993
UH15252: RNCC: 3 | RNVC: 2

3 Aug 1977

5110-01-308-6970
Knife Blade

013086970
LB-6B: RNCC: 3 | RNVC: 2

3 Oct 1989

5110-01-146-2824
Hand Wire Stripper

011462824
525654: RNCC: 3 | RNVC: 2
525654: RNCC: 5 | RNVC: 9
525654: RNCC: 5 | RNVC: 9

27 Jan 1983

5110-01-576-9753
Scraping Knife

015769753
245-7605783 TYPE 3, ITEM 5 & 10: RNCC: 3 | RNVC: 2

20 Aug 2009

5110-01-625-3577
File Handle

016253577
854829001 14: RNCC: 3 | RNVC: 2
11B5090194: RNCC: 7 | RNVC: 2

3 Feb 2014

5110-01-575-9174
Piloted Reamer

015759174
3854AS300-27: RNCC: 3 | RNVC: 2
3854AS300-27: RNCC: 5 | RNVC: 2
3854AS300-27: RNCC: 5 | RNVC: 2
3854AS300-27: RNCC: 5 | RNVC: 2
3854AS300-27: RNCC: 5 | RNVC: 2
3854AS300-27: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9143
Drill Reamer

015759143
3854AS400-30: RNCC: 3 | RNVC: 2
3854AS400-30: RNCC: 5 | RNVC: 2
3854AS400-30: RNCC: 5 | RNVC: 2
3854AS400-30: RNCC: 5 | RNVC: 2
3854AS400-30: RNCC: 5 | RNVC: 2
3854AS400-30: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-322-5554
Spotfacing Footpiece

013225554
ZT339035: RNCC: 3 | RNVC: 2

9 Jul 1990

5110-01-547-2035
Hand Reamer

015472035
34955: RNCC: 3 | RNVC: 2
00.01.93.96: RNCC: 5 | RNVC: 2
2-S: RNCC: 5 | RNVC: 2
00.01.93.96: RNCC: 5 | RNVC: 9

12 Jan 2007

5110-01-390-7553
Hand Reamer

013907553
12901130: RNCC: 3 | RNVC: 2

26 May 1994

5110-01-330-1430
Hand Reamer

013301430
J 22342-11A: RNCC: 3 | RNVC: 2

29 Nov 1990

5110-01-580-4025
Sealant Scraper

015804025
JNT411B90: RNCC: 3 | RNVC: 2
411B90: RNCC: 5 | RNVC: 2

14 Dec 2009

5110-01-543-1952
Bearing Removal Tool Cutter

015431952
RKC4101-8CUT: RNCC: 3 | RNVC: 2

31 Aug 2006

5110-01-424-7673
Scraping Knife Set

014247673
CSA300A: RNCC: 3 | RNVC: 2
CSA300: RNCC: 5 | RNVC: 9

5 Feb 1996

5110-01-309-0280
Knife Safety Cap

013090280
X61110: RNCC: 3 | RNVC: 9
6111: RNCC: 5 | RNVC: 9

11 Oct 1989

5110-01-301-7082
Sub As Handle Shaft

013017082
22000352-1: RNCC: 3 | RNVC: 9

2 Jun 1989

5110-01-210-8185
Hand Wire Stripper

012108185
525652: RNCC: 3 | RNVC: 2
525652: RNCC: 5 | RNVC: 9
525652: RNCC: 5 | RNVC: 9
525652: RNCC: 5 | RNVC: 9

18 Jun 1985

5110-01-440-4214
Hand Reamer

014404214
24270: RNCC: 3 | RNVC: 9
LIST659 7/0: RNCC: 5 | RNVC: 1
659 7/0: RNCC: 5 | RNVC: 9
24270: RNCC: 5 | RNVC: 9
659 7/0: RNCC: 5 | RNVC: 9

13 Jan 1997

5110-01-115-7630
Pliers

011157630
E706B: RNCC: 3 | RNVC: 2
E706CG: RNCC: 5 | RNVC: 2

12 Jul 1981

5110-01-300-7615
Diagonal Cutting Pliers

013007615
927-1056: RNCC: 3 | RNVC: 2

18 May 1989

5110-01-300-7655
Diagonal Cutting Pliers

013007655
MS54: RNCC: 3 | RNVC: 9

18 May 1989

5110-01-124-1861
Craftsman's Knife

011241861
8R: RNCC: 3 | RNVC: 9

28 Dec 1981

5110-00-945-8055
Woodworking Butt Chisel Set

009458055
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 44 TY2: RNCC: 5 | RNVC: 1
GGG-C-311 TY1CL3: RNCC: 5 | RNVC: 9
GGG-C-311: RNCC: 5 | RNVC: 9
1435C: RNCC: 5 | RNVC: 9
B107.44: RNCC: 5 | RNVC: 9

14 Mar 1966

5110-01-410-7181
Hand Wire Stripper

014107181
PWS4: RNCC: 3 | RNVC: 2
PWS4: RNCC: 5 | RNVC: 9

10 Mar 1995

5110-01-365-6531
Hand Reamer

013656531
4090325-61: RNCC: 3 | RNVC: 2
4090325-61: RNCC: 3 | RNVC: 9

9 Oct 1992

5110-01-197-2999
Knockout Punch And Die

011972999
SDP-700: RNCC: 3 | RNVC: 2

20 Dec 1984

5110-01-013-9212
Injection Valve Drill

010139212
YKA4324A: RNCC: 3 | RNVC: 2
YKA4324A: RNCC: 3 | RNVC: 9

10 Dec 1975

5110-01-097-0762
Wire Stripper Blade

010970762
L-5560: RNCC: 3 | RNVC: 2
VG95236T16AA010: RNCC: 5 | RNVC: 2

4 Jul 1980

5110-01-645-0045
Nut Splitting Tool

016450045
175: RNCC: 3 | RNVC: 2

31 May 2015

5110-01-362-2203
Reamer

013622203
ST432: RNCC: 3 | RNVC: 2

3 Aug 1992

5110-01-009-1222
Hand File

010091222
21067: RNCC: 3 | RNVC: 2
21067: RNCC: 5 | RNVC: 9

4 Sep 1975

5110-01-593-1822
Hand Wire Stripper

015931822
HCS2036-01-049: RNCC: 3 | RNVC: 2

4 Apr 2011

5110-01-649-6550
Hand File

016496550
1-230-12-3-0: RNCC: 3 | RNVC: 2
ZHVY0073: RNCC: 5 | RNVC: 2
ZLW0090: RNCC: 5 | RNVC: 2

5 Nov 2015

5110-01-358-4908
Hand Leather Stamping Die Set

013584908
310080234: RNCC: 3 | RNVC: 2

14 May 1992

5110-01-359-6101
Hand Metal Cutting Punch And Die Set

013596101
5 SIZE 9/32: RNCC: 3 | RNVC: 2

10 Jun 1992

5110-01-289-7035
Dimpling Die

012897035
ZT3853-3-32: RNCC: 3 | RNVC: 2

28 Nov 1988

5110-01-289-7039
Knockout Punch And Die

012897039
ZT2953-3-32: RNCC: 3 | RNVC: 2

28 Nov 1988

5110-00-999-4411
Flexible Saw

009994411
W00DMANSM0DEL: RNCC: 3 | RNVC: 2
704: RNCC: 5 | RNVC: 2

11 Feb 1966

5110-01-357-9696
Inclosed Blade Tube Deburring Tool

013579696
DB-8: RNCC: 3 | RNVC: 9

6 May 1992

5110-01-358-5207
Hand Optical Fiber Stripper

013585207
22250: RNCC: 3 | RNVC: 2
NN254: RNCC: 3 | RNVC: 2
NO-NIK: RNCC: 5 | RNVC: 1
1N180120056: RNCC: 5 | RNVC: 2
NN254: RNCC: 5 | RNVC: 2
NN250: RNCC: 5 | RNVC: 9
NN254: RNCC: 5 | RNVC: 9
NO-NIK: RNCC: 5 | RNVC: 9

15 May 1992

5110-01-288-2428
Wear Sleeve Distorter Set

012882428
5P7318: RNCC: 3 | RNVC: 2
5P-7318: RNCC: 5 | RNVC: 2

4 Nov 1988

5110-01-288-3448
Knockout Punch And Die

012883448
ZT1748-8: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-288-3463
Knockout Punch And Die

012883463
ZT2953-1-8: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-127-0435
Hand Wire Stripper

011270435
7956504-41: RNCC: 3 | RNVC: 2
01-0225-3192: RNCC: 5 | RNVC: 2
01-0225-3192: RNCC: 5 | RNVC: 9

22 Feb 1982

5110-01-085-7135
Exposed Blade Tube Deburring Tool

010857135
D10210: RNCC: 3 | RNVC: 2

13 Nov 1979

5110-01-355-9317
Scraper Blade

013559317
BP200: RNCC: 3 | RNVC: 2

26 Mar 1992

5110-01-356-6602
Diagonal Cutting Pliers

013566602
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 11 TY1CL1: RNCC: 5 | RNVC: 1
942-6C: RNCC: 5 | RNVC: 2
B107.11: RNCC: 5 | RNVC: 9
B107.11 TY1CL1: RNCC: 5 | RNVC: 9
B107.11 TY1CL1STA: RNCC: 5 | RNVC: 9
942-6C: RNCC: 5 | RNVC: 9

8 Apr 1992

5110-01-356-8210
Hand Blade Stripper

013568210
L9127: RNCC: 3 | RNVC: 2

10 Apr 1992

5110-01-431-0230
Hand Wire Stripper-Crimper

014310230
TCT60A: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-1494
Pocket Knife

014311494
K10998: RNCC: 3 | RNVC: 9

8 May 1996

5110-01-428-9672
Scraping Knife

014289672
28-239: RNCC: 3 | RNVC: 2
6R023: RNCC: 5 | RNVC: 2

3 Apr 1996

5110-01-430-6312
Hand Hacksaw Blade

014306312
232HE: RNCC: 3 | RNVC: 2
KOP 012: RNCC: 5 | RNVC: 9
232HE: RNCC: 5 | RNVC: 9

2 May 1996

5110-01-430-1606
Craftsman's Knife

014301606
PK300: RNCC: 3 | RNVC: 2

24 Apr 1996

5110-01-289-6596
Hand Reamer

012896596
AFT74R330003-T7: RNCC: 3 | RNVC: 2

28 Nov 1988

5110-01-155-3826
Tube Deburring Tool Stem

011553826
D9851-13-07: RNCC: 3 | RNVC: 2

8 Jun 1983

5110-01-429-3577
Dimpling Die

014293577
ATI207A-3-P: RNCC: 3 | RNVC: 2
AT207A-3-P: RNCC: 5 | RNVC: 9

9 Apr 1996

5110-01-337-2814
Hand Wire Stripper

013372814
NN008: RNCC: 3 | RNVC: 2
NO-NIK: RNCC: 5 | RNVC: 1
118-807: RNCC: 5 | RNVC: 2
NN203: RNCC: 5 | RNVC: 2
NN008: RNCC: 5 | RNVC: 2
NN008: RNCC: 5 | RNVC: 9
NO-NIK: RNCC: 5 | RNVC: 9

11 Apr 1991

5110-01-426-3914
Hand Operated Cable Cutter

014263914
8790CS: RNCC: 3 | RNVC: 2
8790CS: RNCC: 5 | RNVC: 9

11 Mar 1996

5110-01-335-1518
Hand Wire Stripper

013351518
PWC7: RNCC: 3 | RNVC: 2

6 Mar 1991

5110-01-478-5254
Craftsman's Knife

014785254
9-9487: RNCC: 3 | RNVC: 9

15 Sep 2000

5110-01-416-8863
File Handle

014168863
70562: RNCC: 3 | RNVC: 9

26 Jul 1995

5110-01-417-4274
Scraper Blade

014174274
12456: RNCC: 3 | RNVC: 9
12456: RNCC: 5 | RNVC: 9
12456: RNCC: C | RNVC: 1

7 Aug 1995

5110-01-382-7952
Circle Cutter

013827952
03400: RNCC: 3 | RNVC: 2

9 Nov 1993

5110-01-335-1368
Scraping Knife

013351368
PK23A: RNCC: 3 | RNVC: 2
PK23A: RNCC: 5 | RNVC: 2
PK23: RNCC: 5 | RNVC: 9

6 Mar 1991

5110-01-474-4778
Drum Deheader

014744778
641-0702: RNCC: 3 | RNVC: 2
CAM 6410702: RNCC: 5 | RNVC: 2
641-0702: RNCC: 5 | RNVC: 9

4 May 2000

5110-01-474-0088
Knockout Punch Punch

014740088
KP2000B: RNCC: 3 | RNVC: 2
KP2000B GARDNER BENDER: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-473-9402
Shingling Hatchet

014739402
B107.400: RNCC: 3 | RNVC: 1
B107.400 CAT 42 TY1CL1: RNCC: 5 | RNVC: 1
E3-UL ESTWING: RNCC: 5 | RNVC: 2
E3-UL: RNCC: 5 | RNVC: 2
B107.42: RNCC: 5 | RNVC: 9
B107.42 TY1CL1: RNCC: 5 | RNVC: 9
E3-CA: RNCC: C | RNVC: 1

19 Apr 2000

5110-01-474-0011
Exposed Blade Tube Deburring Tool

014740011
64962: RNCC: 3 | RNVC: 2
73: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-171-3911
Thrust Surface Cutter

011713911
3375053: RNCC: 3 | RNVC: 2

7 Feb 1984

5110-01-408-6818
Wire Rope Cutter Repair Kit

014086818
P62: RNCC: 3 | RNVC: 2
P61: RNCC: 5 | RNVC: 9
P62: RNCC: 5 | RNVC: 9
P61: RNCC: 5 | RNVC: 9

23 Feb 1995

5110-01-411-2694
Craftsman's Knife

014112694
GGG-K-450 TY1CL1ST1: RNCC: 2 | RNVC: 2

21 Mar 1995

5110-01-378-7465
Craftsman's Knife Set

013787465
618ST016: RNCC: 3 | RNVC: 2

21 Aug 1993

5110-01-451-0958
Hand Wire Stripper

014510958
990343: RNCC: 3 | RNVC: 2
990343: RNCC: 5 | RNVC: 9

4 Dec 1997

5110-01-434-9609
File Handle

014349609
21476: RNCC: 3 | RNVC: 2
21476: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9848
Metal Cutting Hand Saw

014349848
70-861: RNCC: 3 | RNVC: 9
70-861: RNCC: 5 | RNVC: 9
70-861: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-458-9563
Plastic Blade Cutter

014589563
1276P: RNCC: 3 | RNVC: 2

16 Sep 1998

5110-01-019-1771
Hand Wire Stripper

010191771
5110-01-019-1771: RNCC: 3 | RNVC: 2
NO-NIK: RNCC: 5 | RNVC: 1
118-814: RNCC: 5 | RNVC: 2
NN023: RNCC: 5 | RNVC: 2
NN023: RNCC: 5 | RNVC: 9
NO-NIK: RNCC: 5 | RNVC: 9

14 Apr 1976

5110-01-430-3460
Boiler Tube Cutter Cutter Bit

014303460
45258: RNCC: 3 | RNVC: 2

26 Apr 1996

5110-01-431-0212
Hand Wire Stripper-Crimper

014310212
TCT10: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-429-7319
Carpenter's Square

014297319
8T: RNCC: 3 | RNVC: 2

17 Apr 1996

5110-01-430-2538
Hand Collar Removal Chisel

014302538
HSC 07-5: RNCC: 3 | RNVC: 2

25 Apr 1996

5110-01-430-5261
Hand File Set

014305261
HBF500O: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-453-3120
Scraper Blade

014533120
PWA71710: RNCC: 3 | RNVC: 2

25 Feb 1998

5110-01-043-8410
Pliers

010438410
LC665CJ: RNCC: 3 | RNVC: 2
LC665CJV: RNCC: 3 | RNVC: 2
17108: RNCC: 5 | RNVC: 2
239-4010: RNCC: 5 | RNVC: 2
73CG: RNCC: 5 | RNVC: 9
LC665CJV: RNCC: 5 | RNVC: 9
582E: RNCC: 5 | RNVC: 9
LC55-2: RNCC: 5 | RNVC: 9
17108: RNCC: 5 | RNVC: 9
LC665CJ: RNCC: 5 | RNVC: 9

1 Jul 1977

5110-01-428-4523
Wire Stripper Frame

014284523
L-9039: RNCC: 3 | RNVC: 2
L-9039: RNCC: 3 | RNVC: 2

27 Mar 1996

Load More Results