What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 45 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 45of 112

5110-01-434-9552
Hand File

014349552
03863: RNCC: 3 | RNVC: 1
03863: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-492-9388
Hand Reamer

014929388
9C4163: RNCC: 3 | RNVC: 2

17 Dec 2001

5110-01-435-7061
Metal Cutting Hand Saw

014357061
863: RNCC: 3 | RNVC: 2
863 GENERAL TOOL: RNCC: 5 | RNVC: 2
43065: RNCC: 5 | RNVC: 2
863: RNCC: 5 | RNVC: 9

29 Aug 1996

5110-01-646-6360
Scraping Knife

016466360
235072: RNCC: 3 | RNVC: 2
235072: RNCC: 5 | RNVC: 2

27 Jul 2015

5110-01-621-5255
Craftsman's Knife

016215255
5110-00-NIB-0051: RNCC: 3 | RNVC: 2
510009401N: RNCC: 3 | RNVC: 2

10 Sep 2013

5110-01-644-0378
Hand Metal Stamping Die

016440378
20951Z: RNCC: 3 | RNVC: 2

20 Apr 2015

5110-01-644-0402
Hand Metal Stamping Die

016440402
20951L: RNCC: 3 | RNVC: 2

20 Apr 2015

5110-01-663-3083
Hand Operated Cable Cutter

016633083
1-VC1: RNCC: 3 | RNVC: 2

4 May 2017

5110-01-664-2906
Tube End Cone Tool

016642906
2-HF4: RNCC: 3 | RNVC: 2

13 Jun 2017

5110-01-620-1271
Hand Metal Cutting Shears

016201271
FSPP-108-00-002: RNCC: 3 | RNVC: 2

3 Jul 2013

5110-01-575-9130
Piloted Reamer

015759130
3854AS300-42: RNCC: 3 | RNVC: 2
3854AS300-42: RNCC: 5 | RNVC: 2
3854AS300-42: RNCC: 5 | RNVC: 2
3854AS300-42: RNCC: 5 | RNVC: 2
3854AS300-42: RNCC: 5 | RNVC: 2
3854AS300-42: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-429-7856
Hand Operated Cable Cutter Blade

014297856
35-057: RNCC: 3 | RNVC: 2
35-057: RNCC: 5 | RNVC: 9
35-057: RNCC: 5 | RNVC: 9

18 Apr 1996

5110-01-429-3685
Dimpling Punch

014293685
ATI206A-3-P: RNCC: 3 | RNVC: 2
AT206A-3-P: RNCC: 5 | RNVC: 9
AT206A-3-P: RNCC: C | RNVC: 1

9 Apr 1996

5110-01-658-2789
Bolt Cutter

016582789
DE-MBM: RNCC: 3 | RNVC: 2
DE-MBM: RNCC: 5 | RNVC: 2

21 Sep 2016

5110-01-576-4056
Ice Climbing Tool

015764056
412076: RNCC: 3 | RNVC: 2

30 Jul 2009

5110-01-428-5265
Crosscut Hand Saw

014285265
15-086: RNCC: 3 | RNVC: 2
1HH23: RNCC: 5 | RNVC: 2

27 Mar 1996

5110-01-618-1889
Electricians' Scissors

016181889
661051: RNCC: 3 | RNVC: 2

16 Apr 2013

5110-01-398-1689
Knife Blade

013981689
33668/32914: RNCC: 3 | RNVC: 9
1093058K00: RNCC: 5 | RNVC: 2

26 Oct 1994

5110-01-615-8795
Diagonal Cutting Pliers

016158795
E742BCG: RNCC: 3 | RNVC: 2

25 Jan 2013

5110-01-629-9051
Diagonal Cutting Pliers

016299051
J213G: RNCC: 3 | RNVC: 2
213G: RNCC: 3 | RNVC: 2

18 Jul 2014

5110-00-978-2215
Valve Guide Reamer

009782215
64924-4: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-01-614-1174
Hand Cable Stripper

016141174
CJAST: RNCC: 3 | RNVC: 2

27 Nov 2012

5110-01-612-6394
Kevlar Scissors

016126394
UNT: RNCC: 3 | RNVC: 2

17 Oct 2012

5110-01-612-8128
Line Cutter

016128128
CPS-023-002-006: RNCC: 3 | RNVC: 2

22 Oct 2012

5110-00-971-5477
Pressure Ch Scraper

009715477
66-0047: RNCC: 3 | RNVC: 2

1 Jan 1960

5110-00-975-9448
Hand Wire Stripper

009759448
B107.500: RNCC: 3 | RNVC: 1
B107.37: RNCC: 5 | RNVC: 1
B107.37 TY2CL2: RNCC: 5 | RNVC: 1
760: RNCC: 5 | RNVC: 2
595: RNCC: 5 | RNVC: 9

1 Jan 1960

5110-01-348-9654
Hand Operated Cable Cutter

013489654
PWC80A: RNCC: 3 | RNVC: 2

19 Nov 1991

5110-01-661-9469
Exposed Blade Tube Deburring Tool

016619469
CP-37: RNCC: 3 | RNVC: 2

21 Mar 2017

5110-01-661-6764
Hand Hacksaw Blade

016616764
1232BI-10: RNCC: 3 | RNVC: 2
11A7000341: RNCC: 7 | RNVC: 2

13 Mar 2017

5110-01-524-0000
Dimpling Die

015240000
ZT1873-3/16: RNCC: 3 | RNVC: 2

21 Sep 2004

5110-01-658-0913
Hand Operated Cable Cutter Blade

016580913
1DMV4: RNCC: 3 | RNVC: 2

13 Sep 2016

5110-01-652-0304
Metal Cutting Hand Saw

016520304
209205012: RNCC: 3 | RNVC: 1

8 Feb 2016

5110-01-337-9489
Hand Reamer Set

013379489
900K500-009C: RNCC: 3 | RNVC: 2

24 Apr 1991

5110-00-720-4758
Riffler

007204758
A-A-2470: RNCC: 4 | RNVC: 1
36168: RNCC: 5 | RNVC: 2
MS15683-3: RNCC: 5 | RNVC: 9
36168: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-194-9429
Diagonal Cutting Pliers

011949429
95CG: RNCC: 3 | RNVC: 2
95CG: RNCC: 5 | RNVC: 9

20 Nov 1984

5110-01-649-6546
Hand File

016496546
1-230-12-2-0: RNCC: 3 | RNVC: 2
ZHVY0072: RNCC: 5 | RNVC: 2
ZLW0089: RNCC: 5 | RNVC: 2

5 Nov 2015

5110-00-938-9309
Swirl Guide Reamer

009389309
PWA17543: RNCC: 3 | RNVC: 2

21 Mar 1967

5110-01-589-1910
Knockout Punch And Die Set

015891910
66002: RNCC: 3 | RNVC: 2

20 Oct 2010

5110-01-588-0929
Hand Operated Cable Cutter

015880929
PATCUT129ACSR-18V: RNCC: 3 | RNVC: 2

1 Sep 2010

5110-01-351-9072
File Handle

013519072
10208: RNCC: 3 | RNVC: 2
4322A8: RNCC: 5 | RNVC: 2
445-T8: RNCC: 5 | RNVC: 2

17 Jan 1992

5110-00-994-2948
Knife Blade

009942948
X28: RNCC: 3 | RNVC: 9
28: RNCC: 5 | RNVC: 9

1 Jan 1960

5110-01-437-2166
Hand File

014372166
HB5PK: RNCC: 3 | RNVC: 2
HB5: RNCC: 5 | RNVC: 9

7 Oct 1996

5110-01-674-4449
Pliers

016744449
JIC-842: RNCC: 3 | RNVC: 9

26 Jul 2018

5110-01-408-7415
Diagonal Cutting Pliers

014087415
3619A11: RNCC: 3 | RNVC: 2

24 Feb 1995

5110-01-673-4009
Pocket Folding Multi-Tool

016734009
30-001426: RNCC: 3 | RNVC: 2

13 Jun 2018

5110-12-126-1912
Rectangular Cutting Punch

121261912
148D15: RNCC: 3 | RNVC: 2

30 May 1969

5110-01-671-7389
Hand Operated Cable Cutter

016717389
774: RNCC: 3 | RNVC: 2

9 Apr 2018

5110-01-672-2620
Electricians' Scissors

016722620
AFT-T-KS: RNCC: 3 | RNVC: 2

26 Apr 2018

5110-17-120-1595
Plumber's Saw Blade

171201595
V770A1: RNCC: 3 | RNVC: 2

21 Feb 2007

5110-01-419-4361
Hand Optical Fiber Stripper

014194361
MS1-FS-RB-08N-RT-40: RNCC: 3 | RNVC: 2

21 Sep 1995

5110-01-697-2219
Tube Cutter Cutting Wheel

016972219
73505: RNCC: 3 | RNVC: 2

8 Sep 2021

5110-01-667-7735
Tube Cutter Cutting Wheel

016677735
412-076-009-101: RNCC: 3 | RNVC: 2

30 Oct 2017

5110-01-541-0986
Craftsman's Knife

015410986
5LC44: RNCC: 3 | RNVC: 2
NH-1: RNCC: 5 | RNVC: 2
NH-1: RNCC: 5 | RNVC: 9

15 Jun 2006

5110-00-260-1640
Hand Reamer

002601640
B94.2: RNCC: 3 | RNVC: 1
712-045665: RNCC: 5 | RNVC: 2
101-0-0.2656: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
A-A-2928: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-260-1668
Hand Reamer

002601668
B94.2: RNCC: 3 | RNVC: 1
21238: RNCC: 5 | RNVC: 2
712-045863: RNCC: 5 | RNVC: 2
C24475: RNCC: 5 | RNVC: 2
101-0-0.3438: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
A-A-2928: RNCC: 5 | RNVC: 9
103HS 11/32 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-260-1717
Hand Reamer

002601717
A-A-2937: RNCC: 4 | RNVC: 1
22769: RNCC: 5 | RNVC: 2
570 F: RNCC: 5 | RNVC: 2
SIZE F: RNCC: 5 | RNVC: 2
C38557: RNCC: 5 | RNVC: 2
43-483-7: RNCC: 5 | RNVC: 2
610-0-F: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
30520: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL1GRASZF: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-516-3816
Hand Reamer

005163816
B94.2: RNCC: 3 | RNVC: 1
207-2-2.0000: RNCC: 5 | RNVC: 9
GGG-R-180 TY6GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-692-6714
Hand Operated Cable Cutter

016926714
DCE150D1: RNCC: 3 | RNVC: 2

5 Jan 2021

5110-01-313-6304
Diagonal Cutting Pliers

013136304
P04-CH: RNCC: 3 | RNVC: 9

12 Jan 1990

5110-00-006-0491
Tube Deburring Tool Stem

000060491
D9851-13-05: RNCC: 3 | RNVC: 2
D9851-13-05: RNCC: 5 | RNVC: 2

21 Jun 1972

5110-00-293-3033
Hand Reamer

002933033
B94.2: RNCC: 3 | RNVC: 1
764-1060-000: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
106RL: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-289-0012
Hand Reamer Set

002890012
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY2: RNCC: 5 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
155-S-09: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL2GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-4213
Hand Reamer

001864213
261-0-11: RNCC: 3 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY14CL1GRASZ11: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-253-3177
Hand Reamer

002533177
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY2: RNCC: 5 | RNVC: 1
155-2-7: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL2GRASZ7: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-555-8505
Dimpling Punch

015558505
F-20 7/8 IN.: RNCC: 3 | RNVC: 2
N02678: RNCC: 5 | RNVC: 2

17 Sep 2007

5110-01-689-8985
Straight Trimmers Shears

016898985
18542: RNCC: 3 | RNVC: 2

16 Jul 2020

5110-01-695-0667
Crosscut Hand Saw

016950667
403-50: RNCC: 3 | RNVC: 9

12 May 2021

5110-01-695-0669
Crosscut Hand Saw

016950669
710-65: RNCC: 3 | RNVC: 9

12 May 2021

5110-01-696-3069
Hand Operated Cable Cutter

016963069
657PL170: RNCC: 3 | RNVC: 9

21 Jul 2021

5110-01-687-1135
Wire Stripper Blade

016871135
STC-W: RNCC: 3 | RNVC: 2

18 Mar 2020

5110-01-683-7325
Wire Stripper Blade Set

016837325
DBS-1100-7: RNCC: 3 | RNVC: 2

4 Oct 2019

5110-01-525-6498
Metal Cutting Hand Saw

015256498
80968: RNCC: 3 | RNVC: 2
80968: RNCC: 5 | RNVC: 9

18 Nov 2004

5110-01-528-3220
Hand Wire Stripper

015283220
45-656: RNCC: 3 | RNVC: 2

9 Mar 2005

5110-01-587-6686
Craftsman's Knife

015876686
10-788: RNCC: 3 | RNVC: 2
10-788: RNCC: 5 | RNVC: 2
STP 10-788: RNCC: 5 | RNVC: 9

16 Aug 2010

5110-01-681-7012
Diagonal Cutting Pliers

016817012
B107.500: RNCC: 3 | RNVC: 1
388ACFCT: RNCC: 3 | RNVC: 2
B107.500 CAT 22 TY1CL1STA: RNCC: 5 | RNVC: 1
B107.22: RNCC: 5 | RNVC: 9
B107.22 TY1CL1STA: RNCC: 5 | RNVC: 9

1 Jul 2019

5110-01-681-4239
Hand File Set

016814239
82820: RNCC: 3 | RNVC: 2
0233575: RNCC: 5 | RNVC: 2

17 Jun 2019

5110-01-694-8105
Diagonal Cutting Pliers

016948105
P87150A: RNCC: 3 | RNVC: 2

26 Apr 2021

5110-01-243-5380
Hand Reamer

012435380
000 589 11 53 00: RNCC: 3 | RNVC: 2
000 589 11 53 00: RNCC: 5 | RNVC: 2
000 589 11 53 00: RNCC: 5 | RNVC: 9

28 Oct 1986

5110-01-671-1990
Tinner's Hollow Cutting Punch

016711990
AX1351: RNCC: 3 | RNVC: 2

19 Mar 2018

5110-01-305-1857
Digging Chisel

013051857
52-B-9496-3: RNCC: 3 | RNVC: 2

1 Aug 1989

5110-01-467-8807
Hand File

014678807
01798: RNCC: 3 | RNVC: 2
32.278: RNCC: 5 | RNVC: 2
01798: RNCC: 5 | RNVC: 9

17 Sep 1999

5110-01-547-0064
Tube Cutter Cutting Wheel

015470064
S45056-Z479-A5: RNCC: 3 | RNVC: 9

10 Jan 2007

5110-01-657-9507
Single Bow Cutting Punch

016579507
245 11: RNCC: 3 | RNVC: 2
245-11: RNCC: 5 | RNVC: 2
245-11: RNCC: 5 | RNVC: 9

7 Sep 2016

5110-01-658-5701
Pocket Knife

016585701
44220: RNCC: 3 | RNVC: 2

4 Oct 2016

5110-01-657-0379
Knife Blade

016570379
11-325T: RNCC: 3 | RNVC: 2

28 Jul 2016

5110-01-655-1907
Diagonal Cutting Pliers

016551907
84-112: RNCC: 3 | RNVC: 2

20 May 2016

5110-01-543-2165
Bearing Removal Tool Cutter

015432165
RKC4101-5ACUT: RNCC: 3 | RNVC: 2

1 Sep 2006

5110-01-398-9370
Hand Cold Chisel

013989370
00942973000: RNCC: 3 | RNVC: 2
9-42973-1: RNCC: 5 | RNVC: 2
42973: RNCC: 5 | RNVC: 2
9-42973: RNCC: 5 | RNVC: 9

11 Nov 1994

5110-01-577-7252
Knife Blade

015777252
79DH491-00: RNCC: 3 | RNVC: 2
4927A39: RNCC: 5 | RNVC: 2
4927A39: RNCC: 5 | RNVC: 2

16 Sep 2009

5110-01-665-6868
Cable Stripper Blade

016656868
39391: RNCC: 3 | RNVC: 2

9 Aug 2017

5110-01-575-9117
Piloted Reamer

015759117
3854AS300-34: RNCC: 3 | RNVC: 2
3854AS300-34: RNCC: 5 | RNVC: 2
3854AS300-34: RNCC: 5 | RNVC: 2
3854AS300-34: RNCC: 5 | RNVC: 2
3854AS300-34: RNCC: 5 | RNVC: 2
3854AS300-34: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9151
Piloted Reamer

015759151
3854AS300-22: RNCC: 3 | RNVC: 2
3854AS300-22: RNCC: 5 | RNVC: 2
3854AS300-22: RNCC: 5 | RNVC: 2
3854AS300-22: RNCC: 5 | RNVC: 2
3854AS300-22: RNCC: 5 | RNVC: 2
3854AS300-22: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9122
Piloted Reamer

015759122
3854AS300-39: RNCC: 3 | RNVC: 2
3854AS300-39: RNCC: 5 | RNVC: 2
3854AS300-39: RNCC: 5 | RNVC: 2
3854AS300-39: RNCC: 5 | RNVC: 2
3854AS300-39: RNCC: 5 | RNVC: 2
3854AS300-39: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9154
Drill Reamer

015759154
3854AS400-2: RNCC: 3 | RNVC: 2
3854AS400-2: RNCC: 5 | RNVC: 2
3854AS400-2: RNCC: 5 | RNVC: 2
3854AS400-2: RNCC: 5 | RNVC: 2
3854AS400-2: RNCC: 5 | RNVC: 2
3854AS400-2: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-541-8746
Fiber Optic Shears

015418746
KS-1: RNCC: 3 | RNVC: 2
0700-3315: RNCC: 5 | RNVC: 2

13 Jul 2006

5110-01-662-7258
Bolt Cutter Jaws

016627258
TRX1018-JAWS: RNCC: 3 | RNVC: 2

18 Apr 2017

5110-01-663-4730
Hand Reamer

016634730
227S: RNCC: 3 | RNVC: 2

11 May 2017

5110-01-600-3263
Hand Operated Cable Cutter Blade

016003263
4528: RNCC: 3 | RNVC: 2

23 Nov 2011

5110-01-665-6885
Hand Operated Wire Rope Cutter

016656885
2175AS: RNCC: 3 | RNVC: 2

9 Aug 2017

5110-01-434-9808
Hand File

014349808
A-A-2311: RNCC: 4 | RNVC: 1
03764: RNCC: 5 | RNVC: 2
03764: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9857
Metal Cutting Hand Saw

014349857
70-863: RNCC: 3 | RNVC: 9
70-863: RNCC: 5 | RNVC: 9
70-863: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-537-5830
Dimpling Die

015375830
AT254DA-3: RNCC: 3 | RNVC: 9
AT254DA-3: RNCC: C | RNVC: 1

14 Feb 2006

5110-01-434-9636
File Handle

014349636
21470N: RNCC: 3 | RNVC: 2
21470: RNCC: 5 | RNVC: 9
21470: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-659-1287
Bolt Cutter

016591287
BLPBC18: RNCC: 3 | RNVC: 2

4 Nov 2016

5110-01-597-4091
Spec Knife

015974091
22-41334: RNCC: 3 | RNVC: 2
457-2155: RNCC: 5 | RNVC: 2

9 Jun 2011

5110-01-537-0894
Dimpling Die

015370894
ZT1794-1: RNCC: 3 | RNVC: 2

25 Jan 2006

5110-01-537-5823
Dimpling Die

015375823
AT254DA-4: RNCC: 3 | RNVC: 9
AT254DA-4: RNCC: C | RNVC: 1

14 Feb 2006

5110-01-648-4540
Hand File

016484540
12131: RNCC: 3 | RNVC: 2
12134: RNCC: 5 | RNVC: 2

24 Sep 2015

5110-01-536-7907
Tube Cutter

015367907
33055: RNCC: 3 | RNVC: 2
00.02.08.14: RNCC: 5 | RNVC: 2
00.02.08.14: RNCC: 5 | RNVC: 9

13 Jan 2006

5110-01-646-6369
Scraping Knife

016466369
235080: RNCC: 3 | RNVC: 2
235080: RNCC: 5 | RNVC: 2

27 Jul 2015

5110-01-301-8279
Cylinder Ridge Reamer

013018279
UDB911688: RNCC: 3 | RNVC: 2
16VA11688: RNCC: 5 | RNVC: 2

4 Jun 1989

5110-01-302-3379
Cylinder Ridge Reamer

013023379
UDB911685: RNCC: 3 | RNVC: 2
RC16-2002: RNCC: 5 | RNVC: 2
16VA11685: RNCC: 5 | RNVC: 2
16VA11685: RNCC: 7 | RNVC: 2

13 Jun 1989

5110-01-644-9172
Rip Hand Saw

016449172
725: RNCC: 3 | RNVC: 2

27 May 2015

5110-01-643-5579
Hand File

016435579
05307N: RNCC: 3 | RNVC: 2
16013: RNCC: 5 | RNVC: 2

6 Apr 2015

5110-01-645-7418
Fiber Optic Cleaver Guide

016457418
0703-3748: RNCC: 3 | RNVC: 2

25 Jun 2015

5110-01-645-5490
Knockout Punch And Die

016455490
125T015-005C: RNCC: 3 | RNVC: 2

20 Jun 2015

5110-01-271-7173
Half Hatchet

012717173
59-140: RNCC: 3 | RNVC: 2

29 Jan 1988

5110-01-271-6314
Hand Metal Stamping Die

012716314
LDNC: RNCC: 3 | RNVC: 2

28 Jan 1988

5110-01-684-9427
Hand Wire Stripper

016849427
FORS-0600S1100: RNCC: 3 | RNVC: 2

20 Nov 2019

5110-01-594-1388
Dimpling Punch

015941388
SM132RR6-3/16: RNCC: 3 | RNVC: 2

22 Apr 2011

5110-01-642-5822
Hand Cable Stripper

016425822
758TT018: RNCC: 3 | RNVC: 2

3 Mar 2015

5110-01-429-7410
Craftsman's Knife

014297410
YA403A: RNCC: 3 | RNVC: 2
YA403: RNCC: 5 | RNVC: 9

17 Apr 1996

5110-01-428-6157
Folding Saw

014286157
15-666: RNCC: 3 | RNVC: 9
3Q058: RNCC: 5 | RNVC: 2
15-666: RNCC: 5 | RNVC: 9

28 Mar 1996

5110-01-429-7398
Thread Restorer File

014297398
TFM7530B: RNCC: 3 | RNVC: 2
11A7000169-2: RNCC: 5 | RNVC: 2
ZLW0290-3: RNCC: 5 | RNVC: 2
ZHVY0335-3: RNCC: 5 | RNVC: 2
TFM7530: RNCC: 5 | RNVC: 9
FRS TFM7530B: RNCC: 5 | RNVC: 9

17 Apr 1996

5110-01-642-6662
Bow Saw

016426662
22-49472: RNCC: 3 | RNVC: 2

4 Mar 2015

5110-01-642-2157
Hand Wire Stripper

016422157
45-2162: RNCC: 3 | RNVC: 2

18 Feb 2015

5110-01-429-1105
Scraping Knife

014291105
CSA14C: RNCC: 3 | RNVC: 2
CSA14: RNCC: 5 | RNVC: 9
CSA14B: RNCC: 5 | RNVC: 9

4 Apr 1996

5110-01-266-1964
Hand Reamer

012661964
SPT18-74D110174-5001TD: RNCC: 3 | RNVC: 2
TF02146-1: RNCC: 5 | RNVC: 2

22 Oct 1987

5110-01-656-2901
Hand Operated Cable Cutter

016562901
ETS8L11: RNCC: 3 | RNVC: 2

24 Jun 2016

5110-01-487-0457
Pocket Knife

014870457
9810-24-1000-37: RNCC: 3 | RNVC: 2

23 Jul 2001

5110-01-435-6879
Hand Cold Chisel

014356879
B107.410: RNCC: 3 | RNVC: 1
B107.48: RNCC: 5 | RNVC: 1
B107.48 TY1CL2: RNCC: 5 | RNVC: 1
CC1632: RNCC: 5 | RNVC: 2
CC1632 WILDE: RNCC: 5 | RNVC: 2

29 Aug 1996

5110-01-589-8824
Hand File

015898824
78-317100: RNCC: 3 | RNVC: 2
SIM 78-317100: RNCC: 5 | RNVC: 9

7 Nov 2010

5110-01-434-7715
Hand Cold Chisel

014347715
107: RNCC: 3 | RNVC: 2
107: RNCC: 5 | RNVC: 9

6 Aug 1996

5110-00-253-3172
Hand Reamer

002533172
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY1: RNCC: 5 | RNVC: 1
155-0-4: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL1GRASZ4: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-253-3184
Hand Reamer

002533184
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY1: RNCC: 5 | RNVC: 1
375B504-017A: RNCC: 5 | RNVC: 2
155-0-10: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL1GRASZ10: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-268-1238
Hand Reamer

002681238
22775: RNCC: 3 | RNVC: 2
570 L: RNCC: 5 | RNVC: 2
43-489-4: RNCC: 5 | RNVC: 2
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL1GRASZL: RNCC: 5 | RNVC: 9
38563: RNCC: 5 | RNVC: 9
C38563: RNCC: 5 | RNVC: 9
38563: RNCC: 5 | RNVC: 9
610-0-L: RNCC: 5 | RNVC: 9
1728 SIZE L: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-243-2005
Hand Reamer

002432005
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY1: RNCC: 5 | RNVC: 1
155-0-1: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL1GRASZ1: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-511-4036
Dimpling Die

015114036
23055726: RNCC: 3 | RNVC: 2

7 Aug 2003

5110-01-682-0303
Single Bit Ax

016820303
B107.400: RNCC: 3 | RNVC: 1
80090609: RNCC: 3 | RNVC: 2
B107.42: RNCC: 5 | RNVC: 1
B107.42 TY2: RNCC: 5 | RNVC: 1
5960A2: RNCC: 5 | RNVC: 2

18 Jul 2019

5110-01-276-2849
Straight Trimmers Shears

012762849
WR-10E-4LHCUT: RNCC: 3 | RNVC: 2

6 Apr 1988

5110-01-681-4517
Hand Cable Stripper

016814517
CST-600-TRAD: RNCC: 3 | RNVC: 2
3192-197: RNCC: 3 | RNVC: 9

18 Jun 2019

5110-01-288-3459
Knockout Punch And Die

012883459
ZT2912-5-32: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-288-3477
Knockout Punch And Die

012883477
ZT3813-1-8: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-431-1094
Diagonal Cutting Pliers

014311094
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 11 TY1CL1: RNCC: 5 | RNVC: 1
B107.11: RNCC: 5 | RNVC: 9
25407: RNCC: 5 | RNVC: 9
B107.11 TY1CL1: RNCC: 5 | RNVC: 9
B107.11 TY1CL1STA: RNCC: 5 | RNVC: 9
25407: RNCC: 5 | RNVC: 9
25407: RNCC: 5 | RNVC: 9

7 May 1996

5110-01-677-9027
Connection Device

016779027
MCC - MCC/LCC ADAPTOR - 310: RNCC: 3 | RNVC: 2

11 Jan 2019

5110-01-430-3095
Pocket Knife

014303095
1770: RNCC: 3 | RNVC: 2

26 Apr 1996

5110-01-430-5221
Tube Cutter

014305221
MAS70027: RNCC: 3 | RNVC: 2
TC127F: RNCC: 5 | RNVC: 9

30 Apr 1996

5110-01-677-3109
Tube Cutter

016773109
29963: RNCC: 3 | RNVC: 2
01960703: RNCC: 5 | RNVC: 2

7 Dec 2018

5110-01-478-5901
Tube Cutter

014785901
TC123C: RNCC: 3 | RNVC: 2
TC123A: RNCC: 5 | RNVC: 9

19 Sep 2000

5110-01-674-7815
Diagonal Cutting Pliers

016747815
B107.500: RNCC: 3 | RNVC: 1
P88150RA: RNCC: 3 | RNVC: 2
P88150R: RNCC: 3 | RNVC: 9
B107.500 CAT 11 TY2CL3: RNCC: 5 | RNVC: 1
B107.11: RNCC: 5 | RNVC: 9
B107.11 TY2CL3: RNCC: 5 | RNVC: 9

9 Aug 2018

5110-01-675-1011
Embroidery Scissors

016751011
758IE743: RNCC: 3 | RNVC: 2

22 Aug 2018

5110-01-673-4008
Pocket Folding Multi-Tool

016734008
30-001427: RNCC: 3 | RNVC: 2

13 Jun 2018

5110-00-186-6687
Hand Reamer

001866687
B94.2: RNCC: 3 | RNVC: 1
C24394: RNCC: 5 | RNVC: 2
101-0-0.1250: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
A-A-2928: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
103HS 1/8 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-6704
Hand Reamer

001866704
B94.2: RNCC: 3 | RNVC: 1
101-0-0.3906: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-6708
Hand Reamer

001866708
B94.2: RNCC: 3 | RNVC: 1
101-0-0.4531: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-632-6226
Hand Reamer

016326226
138864: RNCC: 3 | RNVC: 2

24 Oct 2014

5110-01-288-3478
Knockout Punch And Die

012883478
ZT3813-3-16: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-671-7485
Knockout Punch And Die

016717485
KD1500B: RNCC: 3 | RNVC: 2

9 Apr 2018

5110-01-671-8332
Knockout Punch And Die

016718332
KP1000B: RNCC: 3 | RNVC: 2

12 Apr 2018

5110-01-632-2702
Hand File

016322702
SGF6HR: RNCC: 3 | RNVC: 2

14 Oct 2014

5110-01-378-0318
Hand Wire Stripper

013780318
GGG-S-665: RNCC: 4 | RNVC: 1
GGG-S-665 TY2CL3SZ2: RNCC: 5 | RNVC: 1

10 Aug 1993

5110-01-463-6820
Safet Nose Assembly

014636820
SCTN20-7: RNCC: 3 | RNVC: 2
SCTN20-7: RNCC: 5 | RNVC: 2
SCTN20-7-GOVT: RNCC: 5 | RNVC: 9

31 Mar 1999

5110-21-105-1683
Craftsman's Knife

211051683
REF NOT ON FILE: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-208-8686
Estrattore

152088686
A47033: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-01-633-5021
Hand Reamer

016335021
CBR-6-0-N-1-1990: RNCC: 3 | RNVC: 2

25 Nov 2014

5110-01-604-4746
Gasket Cutting Punch

016044746
PGH8-8: RNCC: 3 | RNVC: 2
FRS PGH8-8: RNCC: 5 | RNVC: 9

6 Apr 2012

5110-66-013-9866
Hand Reamer

660139866
HAND REAMER: RNCC: 3 | RNVC: 1
HANDREAMER: RNCC: 3 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5110-33-155-9806
Pocket Knife

331559806
850.100: RNCC: 3 | RNVC: 2
4871.010: RNCC: 3 | RNVC: 2
66408: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-01-632-1095
Hand Metal Cutting Shears

016321095
14-206: RNCC: 3 | RNVC: 2

8 Oct 2014

5110-98-206-0972
Hand File

982060972
DFAMPD04109 ROUND: RNCC: 2 | RNVC: 2

19 Aug 2004

5110-98-206-0763
Thread Restorer File

982060763
DFAMPD04091: RNCC: 2 | RNVC: 2

24 Jul 2004

5110-15-165-3832
Lima Per Meccanica

151653832
2610110: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-173-4654
Scalpello Valex Sds

151734654
6449204: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-21-105-1929
Combination Plane

211051929
54: RNCC: 3 | RNVC: 1
54: RNCC: 3 | RNVC: 1

4 Jun 1968

5110-99-910-4140
Smiths Brace

999104140
H263: RNCC: 3 | RNVC: 2
FA10512: RNCC: 6 | RNVC: 9
1A176: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-01-620-1273
Hand Optical Fiber Stripper

016201273
FSPP-313-00-001: RNCC: 3 | RNVC: 2

3 Jul 2013

5110-01-617-1757
Bearing Scraper

016171757
440MS134NF0602K: RNCC: 3 | RNVC: 2

14 Mar 2013

5110-01-618-7973
Windshield Knife

016187973
WK100: RNCC: 3 | RNVC: 2

6 May 2013

5110-27-014-8937
Hand Reamer

270148937
3455ATF16436: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-15-136-2752
Sega Ad Arco Carpen

151362752
49880-700: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-165-3679
Tagliatubo D'accia

151653679
24142: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-01-486-2257
Hand Cold Chisel

014862257
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1
J86A1X8S2: RNCC: 5 | RNVC: 2
6DJU3: RNCC: 5 | RNVC: 2
86A 1X8: RNCC: 5 | RNVC: 9
B107.48 TY1CL2: RNCC: 5 | RNVC: 9
B107.48: RNCC: 5 | RNVC: 9
3R150: RNCC: 5 | RNVC: 9
FRS 86A1X8: RNCC: 5 | RNVC: 9

21 Jun 2001

5110-17-115-3729
Diagonal Cutting Pliers

171153729
3773H: RNCC: 3 | RNVC: 2

15 Jan 2003

5110-15-183-2699
Lama Seghetto Bimet

151832699
071213: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-723-9916
Settling Bush

997239916
MC1276161: RNCC: 3 | RNVC: 2

30 Aug 2002

5110-22-607-8832
Plumber's Hand Saw

226078832
2641 7614480: RNCC: 3 | RNVC: 2

17 Aug 2004

5110-15-220-2086
Martello Antiscinti

152202086
1370/BA: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-01-447-5653
Hand Reamer Set

014475653
PWA56747: RNCC: 3 | RNVC: 2

8 Aug 1997

5110-01-696-6174
Pliers

016966174
294PL236: RNCC: 3 | RNVC: 2

6 Aug 2021

5110-01-564-4087
Wire Stripper Blade

015644087
G1-1603: RNCC: 3 | RNVC: 2

16 Jun 2008

5110-01-419-9437
Crimping Adapter

014199437
21C8779G01: RNCC: 3 | RNVC: 2

4 Oct 1995

5110-01-625-9279
Knockout Punch And Die Set

016259279
MP4152: RNCC: 3 | RNVC: 2

20 Feb 2014

5110-01-686-6550
Wire Stripper Blade

016866550
LB-1001: RNCC: 3 | RNVC: 2

27 Feb 2020

5110-01-688-4394
Diagonal Cutting Pliers

016884394
B107.500: RNCC: 3 | RNVC: 1
BAH2430V-160: RNCC: 3 | RNVC: 2
B107.22: RNCC: 5 | RNVC: 1
B107.22 TY2CL4: RNCC: 5 | RNVC: 1

17 May 2020

5110-01-625-3576
File Handle

016253576
854829001 13: RNCC: 3 | RNVC: 2
39542: RNCC: 3 | RNVC: 2
11B5090193: RNCC: 7 | RNVC: 2

3 Feb 2014

5110-01-625-3581
Hand File

016253581
16550: RNCC: 3 | RNVC: 2
11B5090182: RNCC: 7 | RNVC: 2

3 Feb 2014

5110-01-686-1833
Hand Operated Cable Cutter

016861833
15032: RNCC: 3 | RNVC: 2

3 Feb 2020

5110-01-625-5110
Scraping Knife

016255110
7114A16: RNCC: 3 | RNVC: 2

6 Feb 2014

5110-01-682-9600
Craftsman's Knife

016829600
167110-1001: RNCC: 3 | RNVC: 2

30 Aug 2019

5110-01-579-7972
Strap Cutter

015797972
7BLKWSN: RNCC: 3 | RNVC: 2

24 Nov 2009

5110-00-237-8100
Keyhole Saw Blade

002378100
5110-00-237-8100: RNCC: 3 | RNVC: 2
GGG-S-65 TY8: RNCC: 5 | RNVC: 9
VD166A: RNCC: 5 | RNVC: 9
VD166A: RNCC: 5 | RNVC: 9
HB24T: RNCC: 5 | RNVC: 9
GGG-S-65: RNCC: 5 | RNVC: 9
21782-8: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-243-0865
Adz

002430865
11999: RNCC: 3 | RNVC: 2
703-H: RNCC: 3 | RNVC: 2
11-999: RNCC: 5 | RNVC: 9
H-12-T-C: RNCC: 5 | RNVC: 9
GGG-A-151 TY1: RNCC: 5 | RNVC: 9
GGG-A-151: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-253-3155
Hand Reamer

002533155
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY2: RNCC: 5 | RNVC: 1
155-2-5/0: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL2GRASZ5/0: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-254-6620
Hatchet Handle

002546620
B107.400: RNCC: 3 | RNVC: 1
B107.42: RNCC: 5 | RNVC: 1
NN-H-0093 TY4CL1GRB: RNCC: 5 | RNVC: 9
NN-H-0093: RNCC: 5 | RNVC: 9
5110-00-254-6620: RNCC: 5 | RNVC: 9
NN-H-93: RNCC: 5 | RNVC: 9
NN-H-93 TY4CL1: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-243-2007
Hand Reamer

002432007
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY1: RNCC: 5 | RNVC: 1
GGG-R-180 TY8CL1GRASZ5: RNCC: 5 | RNVC: 9
155-0-5: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-268-1312
Hand Reamer

002681312
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
207-2-1.5000: RNCC: 5 | RNVC: 9
GGG-R-180 TY6GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-406-7145
Knife Blade

014067145
P33489B: RNCC: 3 | RNVC: 2
P33489B: RNCC: 5 | RNVC: 2

10 Jan 1995

5110-01-663-3190
Hand Optical Fiber Cleaving Tool

016633190
FB-1688: RNCC: 3 | RNVC: 2

5 May 2017

5110-01-664-4678
Exposed Blade Tube Deburring Tool

016644678
CP-32: RNCC: 3 | RNVC: 2

21 Jun 2017

5110-01-664-5362
Hand File

016645362
FH-H-10B: RNCC: 3 | RNVC: 2

22 Jun 2017

5110-01-350-9698
Hand Cable Stripper

013509698
IDEAL 45-164: RNCC: 3 | RNVC: 9
AE 1529: RNCC: 5 | RNVC: 1
AE 1529/6: RNCC: 5 | RNVC: 2
DBA-4001-02: RNCC: 5 | RNVC: 2
AE 1529 SHEET 7: RNCC: 5 | RNVC: 2
AE 1529 ITEM 6: RNCC: 5 | RNVC: 2

27 Dec 1991

5110-01-649-6539
Hand File

016496539
1-210-12-2-0: RNCC: 3 | RNVC: 2
ZLW0092: RNCC: 5 | RNVC: 2
ZHVY0075: RNCC: 5 | RNVC: 2

5 Nov 2015

5110-00-186-4209
Hand Reamer

001864209
261-0-7: RNCC: 3 | RNVC: 9
GGG-R-180 TY14CL1GRASZ7: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-6692
Hand Reamer

001866692
B94.2: RNCC: 3 | RNVC: 1
564U: RNCC: 5 | RNVC: 2
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
101-0-0.2031: RNCC: 5 | RNVC: 9
103HS 13/64 IN.: RNCC: 5 | RNVC: 9
712-045467: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-155-3828
Tube Cutter

011553828
D12530-001: RNCC: 3 | RNVC: 2

8 Jun 1983

5110-01-677-9680
Razor Kit

016779680
LCC - RAZOR KIT - 270: RNCC: 3 | RNVC: 2

15 Jan 2019

5110-01-504-4095
Metal Cutting Hand Saw

015044095
HS50: RNCC: 3 | RNVC: 2
HS50: RNCC: 5 | RNVC: 2
HS50O: RNCC: 5 | RNVC: 9

28 Jan 2003

5110-01-145-0486
Cutting Punch Assy

011450486
2622425: RNCC: 3 | RNVC: 2

4 Jan 1983

5110-01-645-5487
Knockout Punch And Die

016455487
125T015-310C: RNCC: 3 | RNVC: 2

20 Jun 2015

5110-01-620-1940
Hand Optical Fiber Cleaving Tool

016201940
FSTP0010: RNCC: 3 | RNVC: 2

9 Jul 2013

5110-01-437-1948
File Handle

014371948
SGHF615AG: RNCC: 3 | RNVC: 2
HF615BL: RNCC: 5 | RNVC: 9
SGHF615G: RNCC: 5 | RNVC: 9

7 Oct 1996

5110-01-316-4996
Knife Blade

013164996
3916A12: RNCC: 3 | RNVC: 2

9 Mar 1990

5110-01-693-1326
Hand Cable Stripper

016931326
VDV110-095: RNCC: 3 | RNVC: 2

27 Jan 2021

5110-01-694-4897
Pipe Cutter

016944897
472S: RNCC: 3 | RNVC: 2

6 Apr 2021

5110-01-695-5253
Diagonal Cutting Pliers

016955253
82120: RNCC: 3 | RNVC: 2

10 Jun 2021

5110-01-369-0648
Hand Cold Chisel

013690648
10205: RNCC: 3 | RNVC: 2
10205 MAYHEW: RNCC: 5 | RNVC: 2

13 Dec 1992

5110-01-690-0988
Hand Operated Cable Cutter

016900988
PWC8: RNCC: 3 | RNVC: 2

27 Jul 2020

5110-01-692-4709
Diagonal Cutting Pliers

016924709
STHT84028-8: RNCC: 3 | RNVC: 2

16 Dec 2020

5110-01-692-8387
Hand Cable Stripper

016928387
30-433: RNCC: 3 | RNVC: 2

14 Jan 2021

5110-01-367-4649
Diagonal Cutting Pliers

013674649
86: RNCC: 3 | RNVC: 1

12 Nov 1992

5110-01-612-1475
Hand Reamer

016121475
1219-049: RNCC: 3 | RNVC: 2

3 Oct 2012

5110-01-358-4911
Hand Leather Stamping Die Set

013584911
300080125: RNCC: 3 | RNVC: 2

14 May 1992

5110-01-371-4027
Tube Cutter

013714027
R29549-1-28: RNCC: 3 | RNVC: 2

12 Feb 1993

5110-01-358-4918
Hand Leather Stamping Die Set

013584918
310080344: RNCC: 3 | RNVC: 2

14 May 1992

5110-01-367-1039
Scraper

013671039
0003-0210-950: RNCC: 3 | RNVC: 2
0003-0210-950: RNCC: 5 | RNVC: 9
0003-0210-950: RNCC: C | RNVC: 1

7 Nov 1992

5110-01-364-1910
Hand Operated Cable Cutter

013641910
366RF: RNCC: 3 | RNVC: 2
366R: RNCC: 5 | RNVC: 9

14 Sep 1992

5110-01-473-9680
Hand Cold Chisel

014739680
B107.410: RNCC: 3 | RNVC: 1
B107.48: RNCC: 5 | RNVC: 1
B107.48 TY1CL2: RNCC: 5 | RNVC: 1
85213 MAYHEW: RNCC: 5 | RNVC: 2
85213: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-087-6653
Form And Cutoff Tool

010876653
1977769: RNCC: 3 | RNVC: 2

21 Dec 1979

5110-01-362-2204
Reamer

013622204
ST432-2: RNCC: 3 | RNVC: 2

3 Aug 1992

5110-01-473-3504
Cable Stripper Blade

014733504
SB-2224: RNCC: 3 | RNVC: 9
OK-3907-24B: RNCC: 5 | RNVC: 9
OK-3907-24B: RNCC: 5 | RNVC: 9

5 Apr 2000

5110-01-473-9703
Brick Chisel

014739703
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 50 TY1: RNCC: 5 | RNVC: 1
85780 MAYHEW: RNCC: 5 | RNVC: 2
85780: RNCC: 5 | RNVC: 2
B107.50: RNCC: 5 | RNVC: 9
B107.50 TY1: RNCC: 5 | RNVC: 9

20 Apr 2000

5110-01-288-3424
Dimpling Punch

012883424
ZT186302-6: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-607-9289
Hand Wire Stripper

016079289
45-100: RNCC: 3 | RNVC: 2
45-2787: RNCC: 5 | RNVC: 2

18 Jun 2012

5110-01-433-8695
General Purpose Knife Sharpener

014338695
04307: RNCC: 3 | RNVC: 2

12 Jul 1996

5110-01-361-3409
Hand Metal Stamping Die Set

013613409
02091: RNCC: 3 | RNVC: 2
GGG-D-280 TY1: RNCC: 5 | RNVC: 9
GGG-D-280: RNCC: 5 | RNVC: 9

15 Jul 1992

5110-01-140-8654
Circle Cutter

011408654
8222830: RNCC: 3 | RNVC: 2
8222830: RNCC: 5 | RNVC: 9

19 Oct 1982

5110-01-510-6489
Pocket Knife

015106489
KER2420ST: RNCC: 3 | RNVC: 2
2420ST: RNCC: 3 | RNVC: 2
LINER ACTION FOLDER: RNCC: 5 | RNVC: 2

23 Jul 2003

5110-01-585-9102
Hand Metal Cutting Shears

015859102
M2003: RNCC: 3 | RNVC: 2
M2003: RNCC: 5 | RNVC: 2

11 Jun 2010

5110-01-317-4217
Knife Blade

013174217
X602: RNCC: 3 | RNVC: 2
X602: RNCC: 5 | RNVC: 9
602: RNCC: 5 | RNVC: 9

30 Mar 1990

5110-01-527-8177
Wire Stripper Blade Set

015278177
45-2692-1: RNCC: 3 | RNVC: 2

17 Feb 2005

5110-01-141-6140
Hand Reamer

011416140
ST1188: RNCC: 3 | RNVC: 2

2 Nov 1982

5110-01-600-1723
File Handle

016001723
HF611A: RNCC: 3 | RNVC: 2

15 Nov 2011

5110-01-599-0147
Pocket Knife

015990147
CPS-HOOKKNIFE-JACK: RNCC: 3 | RNVC: 2

9 Sep 2011

5110-01-506-8281
Hand Wire Stripper

015068281
45-1773: RNCC: 3 | RNVC: 2

10 Apr 2003

5110-01-525-5999
Hand File Set

015255999
22040HN: RNCC: 3 | RNVC: 2
44006: RNCC: 5 | RNVC: 2
22040H: RNCC: 5 | RNVC: 9
22040HN: RNCC: 5 | RNVC: 9

17 Nov 2004

5110-01-524-6024
Hand File

015246024
HBF4HR: RNCC: 3 | RNVC: 2
HB4HR: RNCC: 5 | RNVC: 9

7 Oct 2004

5110-01-524-0118
Metal Cutting Hand Saw

015240118
20-001: RNCC: 3 | RNVC: 2
20-001: RNCC: 5 | RNVC: 2
5HK80: RNCC: 5 | RNVC: 2

21 Sep 2004

5110-01-524-1990
Die Assembly Ram

015241990
ZT187302-1/4: RNCC: 3 | RNVC: 2

23 Sep 2004

5110-01-601-4849
Rivet Cutter

016014849
04-31: RNCC: 3 | RNVC: 2

19 Jan 2012

5110-01-540-1138
Bushin Removal Tool

015401138
5HG90819-105: RNCC: 3 | RNVC: 2

9 May 2006

5110-01-288-3461
Knockout Punch And Die

012883461
ZT2947-8: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-288-3457
Knockout Punch And Die

012883457
ZT2912-1-8: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-288-3431
Dimpling Punch

012883431
ZT3855-3/32: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-430-7516
Metal Cutting Hand Saw

014307516
21-600: RNCC: 3 | RNVC: 9
21-600: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-435-6822
Scraping Knife

014356822
01340: RNCC: 3 | RNVC: 2
01340 HYDE: RNCC: 5 | RNVC: 2

29 Aug 1996

5110-01-434-9388
Diagonal Cutting Pliers

014349388
B107.500: RNCC: 3 | RNVC: 1
66CG: RNCC: 3 | RNVC: 2
B107.500 CAT 11 TY1CL1: RNCC: 5 | RNVC: 1
66CG: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-288-3435
Dimpling Punch

012883435
ZT3867-8: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-288-2602
Hand Reamer

012882602
5P7332: RNCC: 3 | RNVC: 2

4 Nov 1988

5110-01-520-8286
Cleaner File Card

015208286
4332A12: RNCC: 3 | RNVC: 2

27 May 2004

5110-01-521-4806
Knife Blade Set

015214806
P61639A: RNCC: 3 | RNVC: 2
FASTRACK PLOTTER, 45GR BLADE: RNCC: 5 | RNVC: 2

23 Jun 2004

5110-01-446-6157
Hand Wire Stripper

014466157
5011 DK20: RNCC: 3 | RNVC: 2

10 Jul 1997

5110-01-277-2569
Hand Cable Stripper

012772569
7141K1: RNCC: 3 | RNVC: 2

20 Apr 1988

5110-01-345-7607
Bolt Cutter

013457607
N24S: RNCC: 3 | RNVC: 2
RIDGID N24S: RNCC: 3 | RNVC: 2

24 Sep 1991

5110-01-518-2113
Hand Metal Stamping Die Set

015182113
02091: RNCC: 3 | RNVC: 2
YNG02091: RNCC: 3 | RNVC: 2

4 Mar 2004

5110-01-598-9728
Dimpling Die

015989728
07-521-4706: RNCC: 3 | RNVC: 2

7 Sep 2011

5110-01-596-2267
Electronic's Scissors

015962267
758SC140: RNCC: 3 | RNVC: 2

13 May 2011

5110-01-562-3848
Pocket Knife

015623848
C89YL: RNCC: 3 | RNVC: 2
ATLANTIC SALT YELLOW FRN: RNCC: 5 | RNVC: 1
6716: RNCC: 5 | RNVC: 2

7 Apr 2008

5110-00-900-6418
Ripping Chisel

009006418
199421034: RNCC: 3 | RNVC: 2
199421034: RNCC: 5 | RNVC: 9

15 Apr 1968

5110-01-440-4215
Hand Reamer

014404215
24271: RNCC: 3 | RNVC: 9
LIST659 6/0: RNCC: 5 | RNVC: 1
659 6/0: RNCC: 5 | RNVC: 9
659 6/0: RNCC: 5 | RNVC: 9
24271: RNCC: 5 | RNVC: 9

13 Jan 1997

5110-01-578-4549
Hand Wire Stripper

015784549
45-716: RNCC: 3 | RNVC: 2
45-716: RNCC: 5 | RNVC: 2
79DH417-00: RNCC: 5 | RNVC: 2

7 Oct 2009

5110-01-291-3666
Hand Cold Chisel

012913666
C-12: RNCC: 3 | RNVC: 2
01.55.00.77: RNCC: 5 | RNVC: 2
01.55.00.77: RNCC: 5 | RNVC: 9
C-12: RNCC: 5 | RNVC: 9

28 Dec 1988

5110-01-555-8503
Dimpling Punch

015558503
F-20 3/4 IN.: RNCC: 3 | RNVC: 2
N02674: RNCC: 5 | RNVC: 2

17 Sep 2007

5110-01-438-9501
Pocket Knife

014389501
05640: RNCC: 3 | RNVC: 2
RIVER SHORTY: RNCC: 5 | RNVC: 1

22 Nov 1996

5110-01-575-9111
Piloted Reamer

015759111
3854AS300-31: RNCC: 3 | RNVC: 2
3854AS300-31: RNCC: 5 | RNVC: 2
3854AS300-31: RNCC: 5 | RNVC: 2
3854AS300-31: RNCC: 5 | RNVC: 2
3854AS300-31: RNCC: 5 | RNVC: 2
3854AS300-31: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9146
Piloted Reamer

015759146
3854AS300-18: RNCC: 3 | RNVC: 2
3854AS300-18: RNCC: 5 | RNVC: 2
3854AS300-18: RNCC: 5 | RNVC: 2
3854AS300-18: RNCC: 5 | RNVC: 2
3854AS300-18: RNCC: 5 | RNVC: 2
3854AS300-18: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9185
Piloted Reamer

015759185
3854AS300-15: RNCC: 3 | RNVC: 2
3854AS300-15: RNCC: 5 | RNVC: 2
3854AS300-15: RNCC: 5 | RNVC: 2
3854AS300-15: RNCC: 5 | RNVC: 2
3854AS300-15: RNCC: 5 | RNVC: 2
3854AS300-15: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9144
Drill Reamer

015759144
3854AS400-4: RNCC: 3 | RNVC: 2
3854AS400-4: RNCC: 5 | RNVC: 2
3854AS400-4: RNCC: 5 | RNVC: 2
3854AS400-4: RNCC: 5 | RNVC: 2
3854AS400-4: RNCC: 5 | RNVC: 2
3854AS400-4: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-573-2282
Craftsman's Knife

015732282
X5251: RNCC: 3 | RNVC: 2

13 Apr 2009

5110-01-288-3441
Dimpling Die

012883441
ZT3868-1-4-28: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-287-7180
Wire Dress Guide

012877180
B112197: RNCC: 3 | RNVC: 9

27 Oct 1988

5110-01-555-8506
Dimpling Punch

015558506
F-20 1/2 IN.: RNCC: 3 | RNVC: 2
N02666: RNCC: 5 | RNVC: 2

17 Sep 2007

5110-01-463-2974
Pipe Cutter

014632974
5001: RNCC: 3 | RNVC: 2

15 Mar 1999

5110-01-573-4235
Diagonal Cutting Pliers

015734235
P-36: RNCC: 3 | RNVC: 2
01.57.70.56: RNCC: 5 | RNVC: 2
2VJ14: RNCC: 5 | RNVC: 2
01.57.70.56: RNCC: 5 | RNVC: 9

22 Apr 2009

5110-01-462-1934
Ceramic Scissors

014621934
92N3664: RNCC: 3 | RNVC: 2
92N3664: RNCC: 5 | RNVC: 9

25 Jan 1999

5110-01-580-8351
Knife Blade

015808351
79DH334-00: RNCC: 3 | RNVC: 2
3815A66: RNCC: 5 | RNVC: 2
3815A66: RNCC: 5 | RNVC: 2

29 Dec 2009

5110-01-580-9481
Sealant Scraper

015809481
41005-01: RNCC: 3 | RNVC: 2

30 Dec 2009

5110-01-581-9489
Bearing Scraper

015819489
77D616339G001: RNCC: 3 | RNVC: 2

2 Feb 2010

5110-01-570-8892
Scraping Knife

015708892
245-7605783 TYPE 2 ITEMS 5 AND 8: RNCC: 3 | RNVC: 2

15 Jan 2009

5110-01-442-2194
Diagonal Cutting Pliers

014422194
INPHLDC8: RNCC: 3 | RNVC: 9

7 Mar 1997

5110-01-371-4020
Exposed Blade Tube Deburring Tool

013714020
R29550-2: RNCC: 3 | RNVC: 2

12 Feb 1993

5110-01-270-0969
Bearing Scraper

012700969
4550-06339-312: RNCC: 3 | RNVC: 2
4550-06339-312: RNCC: 5 | RNVC: 9

29 Dec 1987

5110-01-269-9360
Double Bow Cutting Punch

012699360
3427A25: RNCC: 3 | RNVC: 2
GGG-P-833 TY1CLBST1SZ14: RNCC: 5 | RNVC: 9
GGG-P-833: RNCC: 5 | RNVC: 9

23 Dec 1987

5110-01-458-4255
Hand Wire Stripper

014584255
DEL268: RNCC: 3 | RNVC: 2
HT-268: RNCC: 3 | RNVC: 2

26 Aug 1998

5110-00-186-8199
Woodcarving Gouge

001868199
5: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-01-520-8276
Hand File

015208276
4233A27: RNCC: 3 | RNVC: 2

27 May 2004

5110-01-305-1858
Moil Point Chisel

013051858
52-B-9496-5: RNCC: 3 | RNVC: 2

1 Aug 1989

5110-01-266-1970
Hand Reamer

012661970
SPT5-74D110174-5001TD: RNCC: 3 | RNVC: 2
TF02133-1: RNCC: 5 | RNVC: 2

22 Oct 1987

5110-01-517-0410
Hand Wire Stripper

015170410
214837: RNCC: 3 | RNVC: 2

28 Jan 2004

5110-00-180-2892
Rivet Cutter

001802892
ATI501S: RNCC: 3 | RNVC: 2
AT501S: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-302-3377
Cylinder Ridge Reamer

013023377
UDB911683: RNCC: 3 | RNVC: 2
16VA11683: RNCC: 5 | RNVC: 2

13 Jun 1989

5110-01-609-7319
Knockout Punch And Die

016097319
BMP-16C: RNCC: 3 | RNVC: 2

1 Aug 2012

5110-00-189-3386
Jeweler's Broach

001893386
65-1-10: RNCC: 3 | RNVC: 2
GGG-B-001351: RNCC: 4 | RNVC: 1
GGG-B-001351 TY1: RNCC: 5 | RNVC: 1

9 Jun 1998

5110-01-608-4413
Hand Wire Stripper

016084413
45-2812: RNCC: 3 | RNVC: 2

27 Jun 2012

5110-00-176-2920
Bushin Blade Cutter

001762920
HSP1399: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-021-0084
Chamber Igniter Finish Cutter

010210084
PWA53312: RNCC: 3 | RNVC: 2

7 May 1976

5110-01-555-8498
Dimpling Punch

015558498
F-20 1/8 IN.: RNCC: 3 | RNVC: 2
N02654: RNCC: 5 | RNVC: 2

17 Sep 2007

5110-01-575-9134
Drill Reamer

015759134
3854AS400-22: RNCC: 3 | RNVC: 2
3854AS400-22: RNCC: 5 | RNVC: 2
3854AS400-22: RNCC: 5 | RNVC: 2
3854AS400-22: RNCC: 5 | RNVC: 2
3854AS400-22: RNCC: 5 | RNVC: 2
3854AS400-22: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9192
Drill Reamer

015759192
3854AS400-17: RNCC: 3 | RNVC: 2
3854AS400-17: RNCC: 5 | RNVC: 2
3854AS400-17: RNCC: 5 | RNVC: 2
3854AS400-17: RNCC: 5 | RNVC: 2
3854AS400-17: RNCC: 5 | RNVC: 2
3854AS400-17: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9164
Drill Reamer

015759164
3854AS400-9: RNCC: 3 | RNVC: 2
3854AS400-9: RNCC: 5 | RNVC: 2
3854AS400-9: RNCC: 5 | RNVC: 2
3854AS400-9: RNCC: 5 | RNVC: 2
3854AS400-9: RNCC: 5 | RNVC: 2
3854AS400-9: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9162
Piloted Reamer

015759162
3854AS300-24: RNCC: 3 | RNVC: 2
3854AS300-24: RNCC: 5 | RNVC: 2
3854AS300-24: RNCC: 5 | RNVC: 2
3854AS300-24: RNCC: 5 | RNVC: 2
3854AS300-24: RNCC: 5 | RNVC: 2
3854AS300-24: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-300-2693
Hand Hacksaw Blade

013002693
HCSB1224: RNCC: 3 | RNVC: 2

12 May 1989

5110-00-242-3774
Craftsman's Knife

002423774
DEXTER1: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-01-553-8764
Hand Reamer

015538764
1261-001: RNCC: 3 | RNVC: 2

27 Jul 2007

5110-01-573-6013
Pocket Folding Multi-Tool

015736013
830066: RNCC: 3 | RNVC: 2

29 Apr 2009

5110-00-234-6551
Hand File

002346551
A-A-2318: RNCC: 4 | RNVC: 1
FAC01018: RNCC: 5 | RNVC: 2
GGG-F-325 TY16CL1STA: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-599-5317
Hook Cutter

015995317
8 BLKEOD-ZP: RNCC: 3 | RNVC: 2

2 Oct 2011

5110-01-599-3842
Pliers

015993842
BDG98CP: RNCC: 3 | RNVC: 2

22 Sep 2011

5110-01-600-8488
Utility Cutter

016008488
YA444B: RNCC: 3 | RNVC: 2

21 Dec 2011

5110-01-354-6938
Dimpling Die

013546938
TP4263: RNCC: 3 | RNVC: 2

4 Mar 1992

5110-01-355-2027
Hand Cape Chisel

013552027
B107.410: RNCC: 3 | RNVC: 1
B107.48: RNCC: 5 | RNVC: 1
B107.48 TY1CL1: RNCC: 5 | RNVC: 1
PPC407B: RNCC: 5 | RNVC: 2
PPC407A: RNCC: 5 | RNVC: 9

12 Mar 1992

5110-01-362-8583
Reamer

013628583
ST-432-1: RNCC: 3 | RNVC: 2

17 Aug 1992

5110-01-362-2206
Reamer

013622206
ST432-5: RNCC: 3 | RNVC: 2

3 Aug 1992

5110-00-238-9660
Hand File

002389660
A-A-2320: RNCC: 4 | RNVC: 1
13147: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
13147: RNCC: 5 | RNVC: 9
GGG-F-325 TY17STC: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-358-4913
Hand Leather Stamping Die Set

013584913
310080359: RNCC: 3 | RNVC: 2

14 May 1992

5110-01-359-6104
Hand Metal Cutting Punch And Die Set

013596104
5 SIZE 1/8: RNCC: 3 | RNVC: 2

10 Jun 1992

5110-01-549-2121
Tube Cutter

015492121
31647: RNCC: 3 | RNVC: 2
152-P: RNCC: 5 | RNVC: 2

14 Mar 2007

5110-01-547-9118
Pocket Folding Multi-Tool

015479118
KFE-07500-00: RNCC: 3 | RNVC: 2
MULTI-PLIER 600 BLUNT NOSE: RNCC: 5 | RNVC: 1
07500: RNCC: 5 | RNVC: 2

2 Feb 2007

5110-01-357-4934
Roller Staking Tool

013574934
RST2128: RNCC: 3 | RNVC: 2

24 Apr 1992

5110-01-419-3137
Cable Insulation Slitter

014193137
PA1820: RNCC: 3 | RNVC: 2

19 Sep 1995

5110-01-592-5690
Fastener Retainer Trimming Tool

015925690
FTTT-5-0-1: RNCC: 3 | RNVC: 2

10 Mar 2011

5110-00-243-8755
Jeweler's Saw Blade

002438755
5110-00-243-8755: RNCC: 3 | RNVC: 2
GGG-B-471: RNCC: 4 | RNVC: 1
GGG-B-471 TY2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-01-355-9315
Scraper Blade

013559315
BL162: RNCC: 3 | RNVC: 2

26 Mar 1992

5110-01-345-8260
Hand File

013458260
FOUR WAY: RNCC: 3 | RNVC: 2
150MXAND2400AND4000AND12000: RNCC: 5 | RNVC: 2

24 Sep 1991

5110-01-330-4306
Diagonal Cutting Pliers

013304306
10-01/15: RNCC: 3 | RNVC: 2

4 Dec 1990

5110-00-243-2465
End Cutting Nippers

002432465
GGG-N-350: RNCC: 4 | RNVC: 1
GGG-N-350 TY1CL1STA: RNCC: 5 | RNVC: 1

11 Oct 1985

5110-01-564-5585
Bearing Scraper

015645585
906328-01: RNCC: 3 | RNVC: 2

19 Jun 2008

5110-01-413-6601
Hand Optical Fiber Stripper

014136601
FO-103S: RNCC: 3 | RNVC: 2
1N180120050: RNCC: 5 | RNVC: 2

18 May 1995

5110-01-246-7882
Hand Optical Fiber Cleaving Tool

012467882
92208: RNCC: 3 | RNVC: 2
7771616: RNCC: 5 | RNVC: 9
92208: RNCC: 5 | RNVC: 9

18 Dec 1986

5110-01-561-6706
Hand Optical Fiber Cleaving Tool

015616706
S326A: RNCC: 3 | RNVC: 2
S325A: RNCC: 5 | RNVC: 9

13 Mar 2008

5110-01-392-0905
Razor Blade Glass Scraper

013920905
WSC2: RNCC: 3 | RNVC: 2

23 Jun 1994

5110-01-558-9421
Bearing Scraper

015589421
80072PC20: RNCC: 3 | RNVC: 2

29 Nov 2007

5110-01-373-3671
Hand Wire Stripper

013733671
105-17: RNCC: 3 | RNVC: 2

2 Apr 1993

5110-01-406-9886
Miter Box And Saw

014069886
1-19-614: RNCC: 3 | RNVC: 2

18 Jan 1995

5110-01-540-0546
Craftsman's Knife

015400546
35-300: RNCC: 3 | RNVC: 2
462IE300: RNCC: 3 | RNVC: 2
35-300: RNCC: 5 | RNVC: 9

8 May 2006

5110-01-368-4460
Hand Metal Cutting Shears

013684460
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 16 TY1CL1STA: RNCC: 5 | RNVC: 1
A-9 COOPER/WISS: RNCC: 5 | RNVC: 2
A9N: RNCC: 5 | RNVC: 2
B107.16: RNCC: 5 | RNVC: 9
A9: RNCC: 5 | RNVC: 9
B107.16 TY1CL1: RNCC: 5 | RNVC: 9
B107.16 TY1CL1STA: RNCC: 5 | RNVC: 9
A9: RNCC: 5 | RNVC: 9

1 Dec 1992

5110-01-414-9867
Pliers

014149867
170: RNCC: 3 | RNVC: 9
B-406-0430: RNCC: 5 | RNVC: 2

18 Jun 1995

5110-01-414-5406
Multipurpose Pliers Accessory Kit

014145406
05200: RNCC: 3 | RNVC: 2
55200: RNCC: 5 | RNVC: 9

8 Jun 1995

5110-01-266-1966
Hand Reamer

012661966
SPT2-74D110174-5001TD: RNCC: 3 | RNVC: 2
TF02130-1: RNCC: 5 | RNVC: 2

22 Oct 1987

5110-01-267-1892
Bracket Cutter

012671892
625-1233-001: RNCC: 3 | RNVC: 9

6 Nov 1987

5110-01-537-5829
Dimpling Die

015375829
AT252DC4: RNCC: 3 | RNVC: 9
AT252DC4: RNCC: C | RNVC: 1

14 Feb 2006

5110-01-262-7305
Oil Filter Cutter

012627305
3376579: RNCC: 3 | RNVC: 2

2 Sep 1987

5110-01-535-8006
Bearing Scraper Set

015358006
CSA400AO: RNCC: 3 | RNVC: 9

12 Dec 2005

5110-01-362-2205
Reamer

013622205
ST432-4: RNCC: 3 | RNVC: 2

3 Aug 1992

5110-01-242-4957
Tool Extraction

012424957
69656-MODE: RNCC: 3 | RNVC: 2

12 Oct 1986

5110-01-432-5182
Scraping Knife Set

014325182
CSA400B: RNCC: 3 | RNVC: 2
CSA400A: RNCC: 5 | RNVC: 9

7 Jun 1996

5110-01-361-8977
Electricians' Scissors

013618977
925: RNCC: 3 | RNVC: 2

28 Jul 1992

5110-01-542-4503
Hand Reamer

015424503
9727047-03: RNCC: 3 | RNVC: 2

7 Aug 2006

5110-01-274-9919
Pocket Knife

012749919
5069: RNCC: 3 | RNVC: 9
5012: RNCC: 5 | RNVC: 9

17 Mar 1988

5110-01-339-4710
Hand Optical Fiber Stripper

013394710
NN305: RNCC: 3 | RNVC: 2
NO-NIK: RNCC: 5 | RNVC: 1
NN305: RNCC: 5 | RNVC: 2
NN300: RNCC: 5 | RNVC: 9
NN305: RNCC: 5 | RNVC: 9
NO-NIK: RNCC: 5 | RNVC: 9

22 May 1991

5110-01-273-7166
Tube Cutter

012737166
174-F: RNCC: 3 | RNVC: 9

1 Mar 1988

5110-01-537-5837
Dimpling Die

015375837
AT252DC-5: RNCC: 3 | RNVC: 9
AT252DC-5: RNCC: C | RNVC: 1

14 Feb 2006

5110-01-380-9356
Hand Wire Stripper

013809356
45-170: RNCC: 3 | RNVC: 2
45-170: RNCC: 3 | RNVC: 2

30 Sep 1993

5110-00-293-0363
Dimpling Punch

002930363
48C19983-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-293-3014
Hand Reamer

002933014
53C20381-4981: RNCC: 3 | RNVC: 2
53C20381-5280: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-01-531-5434
Hand Operated Cable Cutter

015315434
DBL993630: RNCC: 3 | RNVC: 9
993-630: RNCC: 5 | RNVC: 9

13 Jul 2005

5110-01-533-9042
Hand Reamer

015339042
105508: RNCC: 3 | RNVC: 2

29 Sep 2005

5110-01-521-4807
Knife Blade Set

015214807
P63681B: RNCC: 3 | RNVC: 2
ENVISION PLOTTER, 30GR BLADE: RNCC: 5 | RNVC: 2

23 Jun 2004

5110-01-522-7458
Diagonal Cutting Pliers

015227458
45-260: RNCC: 3 | RNVC: 2

10 Aug 2004

5110-01-524-0451
Dimpling Die

015240451
ZT179201-3-4: RNCC: 3 | RNVC: 2

22 Sep 2004

5110-01-334-9867
Scraping Knife

013349867
CSA10C: RNCC: 3 | RNVC: 2
CSA10B: RNCC: 5 | RNVC: 9
CSA10A: RNCC: 5 | RNVC: 9

5 Mar 1991

5110-01-335-1522
Hand Cable Stripper

013351522
PWC31: RNCC: 3 | RNVC: 2

6 Mar 1991

5110-01-335-1423
Hand Cold Chisel

013351423
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1
PPC820LB: RNCC: 5 | RNVC: 2
B107.48: RNCC: 5 | RNVC: 9
B107.48 TY1CL2: RNCC: 5 | RNVC: 9
PPC820LA: RNCC: 5 | RNVC: 9

6 Mar 1991

5110-01-336-5023
Dimpling Die

013365023
ZT1863-3/16-24: RNCC: 3 | RNVC: 2

26 Mar 1991

5110-00-851-4117
Tube Cutter

008514117
1232: RNCC: 3 | RNVC: 2
GGG-C-771: RNCC: 4 | RNVC: 1
GGG-C-771 TY2CL2: RNCC: 5 | RNVC: 1
1232: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-256-9905
Hand Operated Cable Cutter

012569905
POD-57523: RNCC: 3 | RNVC: 2

11 Jun 1987

5110-01-258-0753
Hand Wrapping And Unwrapping Tool

012580753
HW-UW-24SM: RNCC: 3 | RNVC: 9
08L644: RNCC: 5 | RNVC: 2
122X326: RNCC: 5 | RNVC: 2
HW-UW-24SM: RNCC: 5 | RNVC: 9

27 Jun 1987

5110-01-532-1340
Hand Wire Stripper

015321340
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 37 TY2CL1: RNCC: 5 | RNVC: 1
45-216: RNCC: 5 | RNVC: 2
B107.37: RNCC: 5 | RNVC: 9
B107.37 TY2CL1: RNCC: 5 | RNVC: 9

29 Jul 2005

5110-01-377-2350
Hand Cable Stripper

013772350
45-165: RNCC: 3 | RNVC: 2
45-165: RNCC: 3 | RNVC: 2
45-165: RNCC: 5 | RNVC: 2
45-165: RNCC: 5 | RNVC: 9

9 Jul 1993

5110-01-377-2271
Hand Wire Stripper

013772271
45-1551: RNCC: 3 | RNVC: 2

9 Jul 1993

5110-01-377-2183
Hand Wire Stripper

013772183
45-1633: RNCC: 3 | RNVC: 2

9 Jul 1993

5110-01-309-0521
Wire Hand Saw

013090521
P-55: RNCC: 3 | RNVC: 2

11 Oct 1989

5110-00-260-0543
Hand File

002600543
A-A-2322: RNCC: 4 | RNVC: 1
16036: RNCC: 5 | RNVC: 2
GGG-F-325 TY19STA: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
16036: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-660-8404
Metal Cutting Hand Saw

016608404
FT-602.AVSE: RNCC: 3 | RNVC: 2

7 Feb 2017

5110-01-664-5360
Hand File

016645360
FH-R-08B: RNCC: 3 | RNVC: 2

22 Jun 2017

5110-01-525-6663
Multi-Tool Adapter

015256663
931012: RNCC: 3 | RNVC: 1

18 Nov 2004

5110-01-376-0276
Hand Optical Fiber Cleaving Tool

013760276
W02220: RNCC: 3 | RNVC: 2

24 May 1993

5110-01-652-0391
Hand Cold Chisel

016520391
J86A5/8S2: RNCC: 3 | RNVC: 1
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1

8 Feb 2016

5110-01-656-8698
Hand File

016568698
80066: RNCC: 3 | RNVC: 2

20 Jul 2016

5110-01-522-9378
Cut Off Blade Kit

015229378
600-056: RNCC: 3 | RNVC: 2
600-056: RNCC: 5 | RNVC: 2
A40699: RNCC: 5 | RNVC: 2
A40699: RNCC: 5 | RNVC: 2

13 Aug 2004

5110-01-524-6022
Hand Metal Cutting Shears

015246022
SNP2A: RNCC: 3 | RNVC: 2
CDT1: RNCC: 5 | RNVC: 9
SNP2: RNCC: 5 | RNVC: 9

7 Oct 2004

5110-01-524-0449
Dimpling Die

015240449
ZT1875-5-16: RNCC: 3 | RNVC: 2

22 Sep 2004

5110-01-521-4803
Knife Blade

015214803
P37311B: RNCC: 3 | RNVC: 2
GRAPHIX PLOTTER 60GR: RNCC: 5 | RNVC: 2

23 Jun 2004

5110-01-325-8343
Hand Wire Stripper

013258343
45-333: RNCC: 3 | RNVC: 2

12 Sep 1990

5110-01-642-5824
Hand Cable Stripper

016425824
758PL041: RNCC: 3 | RNVC: 2

3 Mar 2015

5110-01-642-5827
Hand Wire Stripper

016425827
758PL0031: RNCC: 3 | RNVC: 2

3 Mar 2015

5110-01-521-4802
Knife Blade Set

015214802
P61638A: RNCC: 3 | RNVC: 2
FASTRACK PLOTTER, 30GR: RNCC: 5 | RNVC: 2

23 Jun 2004

5110-01-391-4474
Tube Cutter

013914474
32910: RNCC: 3 | RNVC: 2
10: RNCC: 5 | RNVC: 1
10082810: RNCC: 6 | RNVC: 9

10 Jun 1994

5110-00-239-6229
Hand File

002396229
421: RNCC: 3 | RNVC: 2
A-A-2324: RNCC: 5 | RNVC: 9
GGG-F-325 TY22: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-644-0372
Hand Metal Stamping Die

016440372
20951X: RNCC: 3 | RNVC: 2

20 Apr 2015

5110-00-872-7909
Hand Reamer

008727909
ST338: RNCC: 3 | RNVC: 2
ST151: RNCC: 5 | RNVC: 9

1 Jan 1960

5110-00-223-9111
Wood Scraper

002239111
GGG-S-118: RNCC: 4 | RNVC: 1
GGG-S-118 TY1: RNCC: 5 | RNVC: 1
70: RNCC: 5 | RNVC: 9
MS16641-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-515-4542
Tube Cutter

015154542
MS-TC-308: RNCC: 3 | RNVC: 2

25 Nov 2003

5110-01-516-3239
Pocket Folding Multi-Tool

015163239
TL1-GBR-48251B: RNCC: 3 | RNVC: 2
08251: RNCC: 3 | RNVC: 2
URBAN LEGEND: RNCC: 5 | RNVC: 1

31 Dec 2003

5110-01-626-9058
Craftsman's Knife

016269058
31-000589: RNCC: 3 | RNVC: 2
31-000589: RNCC: 5 | RNVC: 2

25 Mar 2014

5110-01-631-1049
Grm Line Cutter

016311049
70419-41305-10: RNCC: 3 | RNVC: 2

29 Aug 2014

5110-01-513-4297
Pliers

015134297
Q-6255: RNCC: 3 | RNVC: 2
Q-6255: RNCC: 3 | RNVC: 2
533-US-BP: RNCC: 3 | RNVC: 2
533-US-BP: RNCC: 5 | RNVC: 2
533-US: RNCC: 5 | RNVC: 9

24 Sep 2003

5110-01-625-1230
Pocket Folding Multi-Tool

016251230
080-100-671WB: RNCC: 3 | RNVC: 2

27 Jan 2014

5110-01-657-4525
Knockout Punch And Die Set

016574525
R739BB: RNCC: 3 | RNVC: 2
31797: RNCC: 5 | RNVC: 2

15 Aug 2016

5110-01-658-0397
Diagonal Cutting Pliers

016580397
D240-6: RNCC: 3 | RNVC: 2

12 Sep 2016

5110-01-655-8003
Crosscut Hand Saw

016558003
20-046: RNCC: 3 | RNVC: 2
20-046: RNCC: 5 | RNVC: 2

7 Jun 2016

5110-01-623-5145
Pliers

016235145
84-809: RNCC: 3 | RNVC: 2
84-809: RNCC: 3 | RNVC: 9

18 Nov 2013

5110-01-621-1102
Hand Cable Stripper

016211102
11230002: RNCC: 3 | RNVC: 2

23 Aug 2013

5110-00-193-5012
Firmer Gouge

001935012
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY2CL1STA: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-194-6054
Hand Reamer

001946054
B94.2: RNCC: 3 | RNVC: 1
103HS 63/64 IN.: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-695-0494
Lineman Knife

016950494
70904: RNCC: 3 | RNVC: 2

11 May 2021

5110-01-473-9702
Hand Masonry Chisel

014739702
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 50 TY1: RNCC: 5 | RNVC: 1
85772 MAYHEW: RNCC: 5 | RNVC: 2
85772: RNCC: 5 | RNVC: 2
B107.50: RNCC: 5 | RNVC: 9
B107.50 TY1: RNCC: 5 | RNVC: 9

20 Apr 2000

5110-01-027-9703
Craftsman's Knife

010279703
X-3602: RNCC: 3 | RNVC: 9
GGG-K-00450: RNCC: 5 | RNVC: 9
GGG-K-00450 TY1CL1ST2: RNCC: 5 | RNVC: 9

23 Sep 1976

5110-01-446-1316
Craftsman's Knife

014461316
IEK10: RNCC: 3 | RNVC: 2
IEK10: RNCC: 5 | RNVC: 2

24 Jun 1997

5110-01-649-0468
Hand Electrical Wire Cutter

016490468
AS6173: RNCC: 3 | RNVC: 1
AS6173/3-01: RNCC: 5 | RNVC: 2
AS6173: RNCC: 5 | RNVC: 9
R700 016 36: RNCC: 5 | RNVC: 9

15 Oct 2015

5110-01-681-8437
Hand Operated Cable Cutter

016818437
SC-60B: RNCC: 3 | RNVC: 2

10 Jul 2019

5110-01-644-9228
Knife Blade

016449228
076174119831: RNCC: 3 | RNVC: 2

27 May 2015

5110-01-645-8360
Knockout Punch And Die

016458360
125T015-302C: RNCC: 3 | RNVC: 2

30 Jun 2015

5110-01-377-5400
Milling Tool

013775400
003-0505: RNCC: 3 | RNVC: 2

20 Jul 1993

5110-01-644-0370
Hand Metal Stamping Die

016440370
20951W: RNCC: 3 | RNVC: 2

20 Apr 2015

5110-01-671-8336
Knockout Punch And Die

016718336
KP1250B: RNCC: 3 | RNVC: 2

12 Apr 2018

5110-01-375-0065
Knife Blade

013750065
P30033B: RNCC: 3 | RNVC: 2
P30033B: RNCC: 5 | RNVC: 2
P30033B: RNCC: 5 | RNVC: 9

3 May 1993

5110-01-692-9293
Hand Cold Chisel

016929293
7117A34: RNCC: 3 | RNVC: 2

20 Jan 2021

5110-01-693-6527
Pocket Knife

016936527
C45SBK: RNCC: 3 | RNVC: 2

25 Feb 2021

5110-01-552-6042
Cable Tie Installation Tool Cutting Block

015526042
CAMT: RNCC: 3 | RNVC: 2

19 Jun 2007

5110-01-692-4250
Diagonal Cutting Pliers

016924250
STHT84124-8: RNCC: 3 | RNVC: 2

14 Dec 2020

5110-00-186-6782
Hand Reamer

001866782
R1820: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-040-0077
Pocket Knife

010400077
K22: RNCC: 3 | RNVC: 2
K22: RNCC: 5 | RNVC: 9

29 Apr 1977

5110-01-367-3841
Diagonal Cutting Pliers

013673841
E711ACG: RNCC: 3 | RNVC: 2
E711CG: RNCC: 5 | RNVC: 9
E711: RNCC: 5 | RNVC: 9
E711CG: RNCC: C | RNVC: 1

10 Nov 1992

5110-01-368-4056
Hand Cold Chisel

013684056
C-32: RNCC: 3 | RNVC: 2

1 Dec 1992

5110-00-142-7230
Hand Reamer

001427230
TAM1911: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-540-5786
Double Bow Cutting Punch

005405786
GGG-P-833: RNCC: 4 | RNVC: 1
GGG-P-833 TY1CLBST1SZ19: RNCC: 5 | RNVC: 1
149-1-5/8: RNCC: 5 | RNVC: 2
3427A34: RNCC: 5 | RNVC: 2
01056: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-01-355-2026
Hand Cape Chisel

013552026
B107.410: RNCC: 3 | RNVC: 1
B107.48: RNCC: 5 | RNVC: 1
B107.48 TY1CL1: RNCC: 5 | RNVC: 1
PPC406B: RNCC: 5 | RNVC: 2
PPC406A: RNCC: 5 | RNVC: 9

12 Mar 1992

5110-01-158-2657
Single Bit Ax

011582657
97-512243-1: RNCC: 3 | RNVC: 2
GGG-A-926: RNCC: 4 | RNVC: 1

19 Jul 1983

5110-00-198-4289
Hand Reamer

001984289
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY2CL1GRB: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
30710: RNCC: 5 | RNVC: 9
30710: RNCC: 5 | RNVC: 9
397: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-197-9497
Hand Cape Chisel

001979497
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL1: RNCC: 5 | RNVC: 1
22704: RNCC: 5 | RNVC: 2
53116: RNCC: 5 | RNVC: 2
10403: RNCC: 5 | RNVC: 2
B107.48: RNCC: 5 | RNVC: 9
B107.48 TY1CL1: RNCC: 5 | RNVC: 9
GGG-C-313: RNCC: 5 | RNVC: 9
GGG-C-313 TY1STA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-15-208-4964
Punzone Acc. Lungh.

152084964
3GANCNLI0T3X100: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-360-2565
Diagonal Cutting Pliers

123602565
7140151: RNCC: 3 | RNVC: 2

28 Apr 2003

5110-01-334-7712
Bent Trimmers Shears

013347712
409NJS: RNCC: 3 | RNVC: 2

27 Feb 1991

5110-01-547-9164
Hand Operated Wire Rope Cutter

015479164
59907-1: RNCC: 3 | RNVC: 2

2 Feb 2007

5110-01-447-1671
Hand Metal Cutting Shears

014471671
PWC45: RNCC: 3 | RNVC: 9

28 Jul 1997

5110-01-448-4780
Hand Metal Stamping Die

014484780
S7900: RNCC: 3 | RNVC: 2

29 Aug 1997

5110-01-443-8482
Diagonal Cutting Pliers

014438482
P6D: RNCC: 3 | RNVC: 2
P6D: RNCC: 5 | RNVC: 2

20 Apr 1997

5110-01-629-9052
Diagonal Cutting Pliers

016299052
J212G: RNCC: 3 | RNVC: 2

18 Jul 2014

5110-01-437-2196
Pocket Knife

014372196
LB7: RNCC: 3 | RNVC: 2
YA823: RNCC: 5 | RNVC: 9

7 Oct 1996

5110-00-181-7238
Hand Reamer

001817238
TAM3574-59: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-186-6688
Hand Reamer

001866688
B94.2: RNCC: 3 | RNVC: 1
712-045269: RNCC: 5 | RNVC: 2
101-0-0.1406: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
103HS 9/64 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-6690
Hand Reamer

001866690
B94.2: RNCC: 3 | RNVC: 1
460: RNCC: 5 | RNVC: 2
101-0-0.1719: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
103HS 11/64 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-543-1948
Bearing Removal Tool Cutter

015431948
RKC4101-4CUT: RNCC: 3 | RNVC: 2

31 Aug 2006

5110-00-180-0954
Tinner's Hollow Cutting Punch

001800954
GGG-P-833: RNCC: 4 | RNVC: 1
GGG-P-833 TY1CLCST1SZ4: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-01-358-4910
Hand Leather Stamping Die Set

013584910
300080141: RNCC: 3 | RNVC: 2

14 May 1992

5110-15-136-1359
Punteruolo In Accia

151361359
345-6X80: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-14-244-0815

5110-14-244-0807

5110-99-835-4740
Pocket Folding Multi-Tool

998354740
AM SK.024: RNCC: 3 | RNVC: 2

22 Sep 2008

5110-99-931-0170
Tube Cutter

999310170
D8514: RNCC: 3 | RNVC: 2
WD17360: RNCC: 5 | RNVC: 2
UWS4A1: RNCC: 6 | RNVC: 9

15 Aug 2007

5110-01-343-3830
Knife Blade

013433830
3849A2: RNCC: 3 | RNVC: 2

12 Aug 1991

5110-01-333-7600
Hooligan Tool

013337600
T982: RNCC: 3 | RNVC: 2

8 Feb 1991

5110-01-349-5284
File Handle

013495284
GA613: RNCC: 3 | RNVC: 2

27 Nov 1991

5110-01-411-2693
Craftsman's Knife

014112693
GGG-K-450 TY1CL1ST2: RNCC: 2 | RNVC: 2

21 Mar 1995

5110-01-369-0644
Hand Cold Chisel

013690644
B107.410: RNCC: 3 | RNVC: 1
B107.48: RNCC: 5 | RNVC: 1
B107.48 TY1CL2: RNCC: 5 | RNVC: 1
10202 MAYHEW: RNCC: 5 | RNVC: 2
10202: RNCC: 5 | RNVC: 2

13 Dec 1992

5110-01-671-4979
Bar Cutter

016714979
GG725: RNCC: 3 | RNVC: 2

30 Mar 2018

5110-01-671-7483
Knockout Punch And Die

016717483
KP500B: RNCC: 3 | RNVC: 2

9 Apr 2018

5110-00-340-3276
Bow Saw

003403276
5110-00-340-3276: RNCC: 3 | RNVC: 2
GGG-S-64 TY3STD: RNCC: 5 | RNVC: 9
GGG-S-64: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-473-3105
Wire Stripper Blade

014733105
SB-2830: RNCC: 3 | RNVC: 9
OK-3907-30B: RNCC: 5 | RNVC: 9
OK-3907-30B: RNCC: 5 | RNVC: 9

4 Apr 2000

5110-00-293-3045
Hand Reamer

002933045
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
68RB: RNCC: 5 | RNVC: 9
761-0680-000: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-1164
Auger Handle

002931164
5110-00-293-1164: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-293-3031
Hand Reamer

002933031
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
131RL: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
764-1310-000: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-581-1843
Block Plane

005811843
81098: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-431-0344
Hand File Set

014310344
SCF4AKB: RNCC: 3 | RNVC: 2
SCBF4AKB: RNCC: 5 | RNVC: 9

6 May 1996

5110-01-430-3077
Diagonal Cutting Pliers

014303077
387BCP: RNCC: 3 | RNVC: 2
387BCP: RNCC: 5 | RNVC: 2
387ACP: RNCC: 5 | RNVC: 9

26 Apr 1996

5110-01-431-0313
Hand File Set

014310313
SCF4AK: RNCC: 3 | RNVC: 2
SCBF4AK: RNCC: 5 | RNVC: 9

6 May 1996

5110-01-431-4926
Hand Cold Chisel

014314926
1606: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-429-6548
Hand File

014296548
00931312000: RNCC: 3 | RNVC: 2
31312: RNCC: 5 | RNVC: 2
9-31312: RNCC: 5 | RNVC: 9

15 Apr 1996

5110-01-429-7299
Hand File

014297299
10GP: RNCC: 3 | RNVC: 2

17 Apr 1996

5110-01-430-5215
Hand File Set

014305215
SGHBF200A: RNCC: 3 | RNVC: 2
HBF200: RNCC: 5 | RNVC: 9

30 Apr 1996

5110-01-430-5120
Scraping Knife

014305120
SP5165: RNCC: 3 | RNVC: 2
US100: RNCC: 5 | RNVC: 9

30 Apr 1996

5110-01-665-6368
Diagonal Cutting Pliers

016656368
84-105: RNCC: 3 | RNVC: 2

7 Aug 2017

5110-01-355-9314
Scraper Blade

013559314
BP262: RNCC: 3 | RNVC: 2

26 Mar 1992

5110-01-428-5303
Coping Saw Blade

014285303
GGG-B-471: RNCC: 4 | RNVC: 1
GGG-B-471 TY1CL2: RNCC: 5 | RNVC: 1
15-058: RNCC: 5 | RNVC: 2
3Q039: RNCC: 5 | RNVC: 2
15-058: RNCC: 5 | RNVC: 2

27 Mar 1996

5110-01-428-5220
Craftsman's Knife

014285220
10-039: RNCC: 3 | RNVC: 2
5R668: RNCC: 5 | RNVC: 2
10-039: RNCC: 5 | RNVC: 2

27 Mar 1996

5110-01-429-1112
Scraping Knife

014291112
CSA9C: RNCC: 3 | RNVC: 2
CSA9A: RNCC: 5 | RNVC: 9

4 Apr 1996

5110-01-305-6574
Dimpling Punch

013056574
ZT1877-3-16: RNCC: 3 | RNVC: 2

9 Aug 1989

5110-01-661-6284
Hand Hacksaw Frame

016616284
HHBF02: RNCC: 3 | RNVC: 2
11A7000104: RNCC: 7 | RNVC: 2

10 Mar 2017

5110-01-662-1524
Pliers

016621524
D203-8: RNCC: 3 | RNVC: 2

28 Mar 2017

5110-01-662-5281
Exposed Blade Tube Deburring Tool

016625281
CP-33: RNCC: 3 | RNVC: 2

11 Apr 2017

Load More Results