What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 43 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 43of 112

5110-15-185-8254
Serie Cacciaviti 1/

151858254
K115312: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-004-8588
"Tagliatubo 1/8 2""

150048588
37469: RNCC: 3 | RNVC: 2

9 Dec 2013

5110-15-219-4637
Maschio Gas Cil.3/8

152194637
165T3253/8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-171-6521
Raspa Cabinet 1/2 T

151716521
C9440030: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-219-7048
Lima/Raspa Con Mani

152197048
30150150: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-165-4171
Lima 416A/9

151654171
416101: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-136-3997
Serie Lime 1/2 Tond

151363997
2568-6: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-220-6257
5 Alesatore D.24/27

152206257
D.24/27,5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-220-6260
Alesatore D.37/45

152206260
D.37/45: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-186-2286
Lima Tonda 1/2 Dolc

151862286
LT1/2D-8": RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-125-7916
Chiave A Bussola 1/

151257916
0920016: RNCC: 3 | RNVC: 2
920A/16: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-176-2574
Coltello Usag/Facom

151762574
1820VSE: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-20-002-5300
Snow/Knife Saw Comb

200025300
SKSC-1: RNCC: 3 | RNVC: 2

23 Feb 2006

5110-15-209-2284
Tagliatubi 1/8 Da 2

152092284
44600: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-161-7785
Tronchese T/Lat. Us

151617785
TRONCHESE T/LAT. USAG: RNCC: 3 | RNVC: 2

1 Oct 2000

5110-15-234-4074
Pinza Spelafili/Tag

152344074
UT242: RNCC: 3 | RNVC: 2
511015E072024: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-213-6600
Lima 1/2 Tonda Con

152136600
2342G-10B: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-219-4641
Maschio Gas Cil 7/8

152194641
165T3257/8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-213-6601
Lima 1/2 Tonda Con

152136601
2342G-10-1/2D: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-171-6475
Lima Piatta 1/2 Dol

151716475
C16560012: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-171-4961
Cesoia/Forbice Mona

151714961
CESOIA/FORBICE MONADNOCK: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-191-8229
Raccordo Interno 3/

151918229
432: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-165-4073
Punzone 366/6-150

151654073
3666150: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-4011
Tronchese Usag/Faco

151654011
425E: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-138-1217
Cacciaspine C/Suppo

151381217
372082: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-136-0769
Lima 1/2/Tonda

151360769
2601-2-6: RNCC: 3 | RNVC: 2
164897172: RNCC: 5 | RNVC: 2

9 Oct 1996

5110-15-186-0807
Maschio 3/4 Filetti

151860807
MASCHIO3/4FIL16: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-219-4640
Maschio Gas Cil.3/4

152194640
165T325 3/4: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-219-4635
Maschio Gas Cil.1/8

152194635
165T3251/8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-186-2972
Vangh Te-Y-Kspm 8/2

151862972
2595585: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-172-7970
Tagliatubi Da 1/8 R

151727970
TAGLIATUBI DA 1/8 REMS: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-165-4093
Lima 1/2 Tonda

151654093
256128: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-203-5376
Hunger Type Vd Si/4

152035376
185000055A91: RNCC: 3 | RNVC: 2

14 Feb 2008

5110-15-165-4069
Punzone 366/2-125

151654069
3662125: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-124-8893
Tronchese Art. 186/

151248893
186001: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-161-8280
Serie Lime 1/2 200

151618280
1719020: RNCC: 3 | RNVC: 2

1 Oct 2000

5110-15-214-8595
Lima Triangolare 1/

152148595
3LCNTRCNMDM200: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-213-6602
Lima 1/2 Tonda Con

152136602
2342G-10D: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-190-0178
Blade 5/Pkg

151900178
YA580A-1: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-214-9258
Lima 1/2 Tonda

152149258
1-210-10-2-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-218-5209
Tronchese Usag 85/1

152185209
TRONCHESE-USAG: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-219-5087
Cesoia/Tagliareggia

152195087
H201: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-214-0799
Serie Pettini Da 3/

152140799
Q300224: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-186-4742
Cesoia Banco R/Sc K

151864742
NOREF: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-301-5083
File Smooth H/Round

993015083
NO PRIMARY REF 99-301-5083: RNCC: 3 | RNVC: 2
37-50039: RNCC: 5 | RNVC: 2

11 Dec 1995

5110-15-208-3460
Lima 1/2 Tonda Tagl

152083460
3LCNMZCNMDN250: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-186-3481
Rivettatrice P/Inse

151863481
KJ17: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-219-4636
Maschio Gas Cil.1/4

152194636
165T3251/4: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-220-6259
5/37 Alesatore D.31

152206259
D.31,5/37: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-186-0787
Filiera 3/4 16 File

151860787
FIL3/4FILETTI16: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-234-4075
Pinza Spelafili/Tag

152344075
Z109: RNCC: 3 | RNVC: 2

27 Aug 2007

5110-15-186-2404
Lima Triangolo 1/2

151862404
1/2DOLCE-6: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-219-4639
Maschio Gas Cil. 1/

152194639
165T325 5/8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-212-1993
Punzone Da 3/8

152121993
256-3-8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-4790
Lima Ago 1/2 Tonda

152084790
3LPKZAGMDN140: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-214-0797
Serie Pettini Da 1/

152140797
Q300223: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-192-8301
Lima Piatta 1/2 Dol

151928301
0714-61-07: RNCC: 3 | RNVC: 2

26 Mar 2010

5110-15-220-6258
5/31 Alesatore D.27

152206258
D.27,5/31,5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-220-6256
Alesatore D.21/24

152206256
D.21/24: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-233-5625
Fresa In Acciaio C/

152335625
FRESA-C/SUPP.43,6AF: RNCC: 3 | RNVC: 2
511015E097343: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-209-0282
Lima 1/2Tonda 8'T.1

152090282
2601-2-8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-186-0788
Filiera 3/8 24 File

151860788
FIL3/8FILETTI24: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-176-2359
Adattatore 9/16

151762359
EX5110RI5200540: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-215-3985
Riduzione 1/4 Pasto

152153985
83714030: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-210-7753
Tagliatubi Da 1/8 A

152107753
T1/8IP: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-158-1643
Matrici/B In Durall

151581643
MATRICI/B IN DURALLUMINIO: RNCC: 2 | RNVC: 2

18 Dec 2003

5110-15-191-6627
Lima Piatta 1/2 Dol

151916627
ART.37: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-214-8598
Lima Tonda 1/2 Dolc

152148598
3LCNTOCNMDM200: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-220-6925
Raspa 6 1/2

152206925
RASPA61/2: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-186-2405
Lima Quadra 1/2 Dol

151862405
1/2DOLCE-6QUADRA: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-773-2198
Axe;Single/Bit

5110-15-209-9326
Segoncino C/Lama

152099326
783694: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-165-4089
Lima 1/2 Tonda

151654089
2561212: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-192-8300
Lima Mezzo Tonda 1/

151928300
0714-61-39: RNCC: 3 | RNVC: 2

26 Mar 2010

5110-15-192-8299
Lima Tonda 1/2 Dolc

151928299
0714-61-50: RNCC: 3 | RNVC: 2

26 Mar 2010

5110-15-165-3720
Lima 1/2 Tonda Tagl

151653720
260128: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-122-7879
Raspa Usag Art.416/

151227879
416102: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-00-025-2281
Hand Reamer

000252281
B94.2: RNCC: 3 | RNVC: 1
764-1430-000: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
143RL: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-233-9712
Hand Rasp

002339712
A-A-2329: RNCC: 4 | RNVC: 1
19460: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY27CL2STA: RNCC: 5 | RNVC: 9
19460: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-236-2041
Hand Cape Chisel

002362041
5110-00-236-2041: RNCC: 3 | RNVC: 2
53120: RNCC: 5 | RNVC: 2
22706: RNCC: 5 | RNVC: 2
G10-2041: RNCC: 5 | RNVC: 2
GGG-C-313: RNCC: 5 | RNVC: 9
GGG-C-313 TY1STA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-8494
Hand Reamer

005968494
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
764-1400-000: RNCC: 5 | RNVC: 9
140RL: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-720-2668
Double Bow Cutting Punch

007202668
GGG-P-833: RNCC: 4 | RNVC: 1
GGG-P-833 TY1CLBST1: RNCC: 5 | RNVC: 1
3427A12: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-720-4782
Hand Reamer

007204782
A-A-2937: RNCC: 4 | RNVC: 1
570 2/A: RNCC: 5 | RNVC: 2
C38551: RNCC: 5 | RNVC: 2
2092-022: RNCC: 5 | RNVC: 2
22763: RNCC: 5 | RNVC: 2
43-477-9: RNCC: 5 | RNVC: 2
610-0-2/A: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL1GRASZ2/A: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-892-5943
Hand File

008925943
5110-00-892-5943: RNCC: 3 | RNVC: 2
02082: RNCC: 5 | RNVC: 2
A-A-2319: RNCC: 5 | RNVC: 9
GGG-F-325 TY16CL2: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
02082: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-01-644-2769
Hand File

016442769
FO-H-12B: RNCC: 3 | RNVC: 2
JA-006: RNCC: 5 | RNVC: 2

28 Apr 2015

5110-01-594-0312
End Cutting Nippers

015940312
BMPEC5: RNCC: 3 | RNVC: 2

22 Apr 2011

5110-00-025-2282
Hand Reamer

000252282
B94.2: RNCC: 3 | RNVC: 1
761-1460-000: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
146RB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-961-3488
Hand File

009613488
5110-00-961-3488: RNCC: 3 | RNVC: 2
0214: RNCC: 5 | RNVC: 2
32492: RNCC: 5 | RNVC: 2
20222: RNCC: 5 | RNVC: 2
A-A-2325: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
20222: RNCC: 5 | RNVC: 9
GGG-F-325 TY23STC: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-01-594-0320
Craftsman's Knife

015940320
LBUK1: RNCC: 3 | RNVC: 2

22 Apr 2011

5110-01-060-8519
Hand Wire Stripper

010608519
NN010: RNCC: 3 | RNVC: 2
NO-NIK: RNCC: 5 | RNVC: 1
118-808: RNCC: 5 | RNVC: 2
NN010: RNCC: 5 | RNVC: 9
CLAUSS NN010: RNCC: 5 | RNVC: 9
NO-NIK: RNCC: 5 | RNVC: 9
CLAUSS NN010: RNCC: 5 | RNVC: 9

2 Jun 1978

5110-01-266-1957
Hand Reamer

012661957
SPT9-74D110174-5001TD: RNCC: 3 | RNVC: 2
TF02137-1: RNCC: 5 | RNVC: 2

22 Oct 1987

5110-01-271-6316
Hand File Set

012716316
KFS-6: RNCC: 3 | RNVC: 2

28 Jan 1988

5110-01-336-5695
Hand File

013365695
A-A-2318: RNCC: 4 | RNVC: 1
73-40300: RNCC: 5 | RNVC: 2
73-40300 SIMONDS: RNCC: 5 | RNVC: 2

27 Mar 1991

5110-00-260-1728
Hand Reamer

002601728
A-A-2937: RNCC: 4 | RNVC: 1
C38558: RNCC: 5 | RNVC: 2
43-484-5: RNCC: 5 | RNVC: 2
22770: RNCC: 5 | RNVC: 2
570 G: RNCC: 5 | RNVC: 2
GGG-R-180 TY3CL1GRASZG: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
30530: RNCC: 5 | RNVC: 9
30530: RNCC: 5 | RNVC: 9
610-0-G: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-268-1309
Hand Reamer

002681309
B94.2: RNCC: 3 | RNVC: 1
207-2-0.2500: RNCC: 5 | RNVC: 9
GGG-R-180 TY6GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-243-2006
Hand Reamer

002432006
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY1: RNCC: 5 | RNVC: 1
GGG-R-180 TY8CL1GRASZ2: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
155-0-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-253-3178
Hand Reamer

002533178
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY1: RNCC: 5 | RNVC: 1
155-0-7: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL1GRASZ7: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-253-3163
Hand Reamer

002533163
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY2: RNCC: 5 | RNVC: 1
155-2-0: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL2GRASZ0: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-14-310-4214

5110-14-202-5561

5110-15-165-3672
Legno Sen Scalpello

151653672
82706: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-491-0247
Cisaill

144910247
4602 014 300 002: RNCC: 3 | RNVC: 2
F300 0T 001 1044: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-66-014-0109
Hand Masonry Drill

660140109
2303: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-15-220-6926
Spazzola Spid

152206926
SPID: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-266-7007

5110-01-661-6289
Hand Reamer

016616289
155-0-7/0: RNCC: 3 | RNVC: 9
11A7000105-3: RNCC: 7 | RNVC: 2

10 Mar 2017

5110-14-244-0787

5110-15-136-3945
Lama Intercambiabil

151363945
140077: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-215-9912
Bacinella Raccolta

152159912
BACINELLA/NOREF: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-237-4511
Spatola Dentata

152374511
640100: RNCC: 3 | RNVC: 2
511015E054698: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-00-253-3151
Hand Reamer

002533151
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY2: RNCC: 5 | RNVC: 1
155-2-7/0: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL2GRASZ7/0: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-260-1724
Hand Reamer

002601724
A-A-2937: RNCC: 4 | RNVC: 1
22773: RNCC: 5 | RNVC: 2
570 J: RNCC: 5 | RNVC: 2
C38561: RNCC: 5 | RNVC: 2
43-487-8: RNCC: 5 | RNVC: 2
610-0-J: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL1GRASZJ: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
38561: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-253-3161
Hand Reamer

002533161
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY2: RNCC: 5 | RNVC: 1
155-2-2/0: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL2GRASZ2/0: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-253-3170
Hand Reamer

002533170
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY1: RNCC: 5 | RNVC: 1
375B504-010A: RNCC: 5 | RNVC: 2
155-0-3: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
NAS375B504-010A: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL1GRASZ3: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-253-3190
Hand Reamer

002533190
B94.2: RNCC: 3 | RNVC: 2
50-10952: RNCC: 5 | RNVC: 2
21253: RNCC: 5 | RNVC: 2
712-046911: RNCC: 5 | RNVC: 2
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
101-0-1.0000: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
A-A-2928: RNCC: 5 | RNVC: 9
900-1: RNCC: 5 | RNVC: 9
420-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-260-1705
Hand Reamer

002601705
A-A-2937: RNCC: 4 | RNVC: 1
22764: RNCC: 5 | RNVC: 2
570 A: RNCC: 5 | RNVC: 2
C38552: RNCC: 5 | RNVC: 2
43-478-7: RNCC: 5 | RNVC: 2
610-0-A: RNCC: 5 | RNVC: 9
30470: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
30470: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL1GRASZA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-260-1720
Hand Reamer

002601720
B94.2: RNCC: 3 | RNVC: 1
103HS 27/32 IN.: RNCC: 5 | RNVC: 9
101-0-0.8438: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
A-A-2928: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-529-2013
Hand Reamer

005292013
A-A-2937: RNCC: 4 | RNVC: 1
570 7/A: RNCC: 5 | RNVC: 2
C38546: RNCC: 5 | RNVC: 2
43-472-0: RNCC: 5 | RNVC: 2
610-0-7/A: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL1GRASZ7/A: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-801-1431
Hand Reamer

008011431
B94.2: RNCC: 3 | RNVC: 1
101-0-0.4219: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-01-659-9594
Drywall Tape Knife

016599594
3512SD: RNCC: 3 | RNVC: 9

25 Dec 2016

5110-00-233-9718
Hand Rasp

002339718
A-A-2329: RNCC: 4 | RNVC: 1
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY27CL1STA: RNCC: 5 | RNVC: 9
BWFB12: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-0216
Single Bow Cutting Punch

002930216
1280K: RNCC: 3 | RNVC: 2
147 SIZE 12: RNCC: 3 | RNVC: 2
43880: RNCC: 5 | RNVC: 2
51434: RNCC: 5 | RNVC: 2
GGG-P-833 TY1CLBST2: RNCC: 5 | RNVC: 9
GGG-P-833: RNCC: 5 | RNVC: 9
1280K: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-3023
Hand Reamer

002933023
B94.2: RNCC: 3 | RNVC: 1
761-1000-000: RNCC: 5 | RNVC: 9
100RB: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-3041
Hand Reamer

002933041
B94.2: RNCC: 3 | RNVC: 1
764-0560-000: RNCC: 5 | RNVC: 9
56RL: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-4212
Hand Reamer

001864212
B94.2: RNCC: 3 | RNVC: 1
261-0-10: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY14CL1GRASZ10: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-14-245-9094
Decoupejoint Specia

142459094
0808240: RNCC: 3 | RNVC: 2
DEC0UPE J0INT LISSE 30 MM: RNCC: 3 | RNVC: 2
245.T30: RNCC: 5 | RNVC: 2
245T30: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-15-208-3022
Scalpello

152083022
3SANMMCNZ150X15: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-216-0141
Buking Bars

152160141
613AT: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-125-7564
Manico Per Mazza

151257564
EX5110RN0401685: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-27-011-7723
Hand Reamer

270117723
10111KR5010: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-00-260-1708
Hand Reamer

002601708
A-A-2937: RNCC: 4 | RNVC: 1
SIZE D: RNCC: 5 | RNVC: 2
C38555: RNCC: 5 | RNVC: 2
43-481-1: RNCC: 5 | RNVC: 2
22767: RNCC: 5 | RNVC: 2
610-0-D: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
30500: RNCC: 5 | RNVC: 9
30500: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL1GRASZD: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-3047
Hand Reamer

002933047
B94.2: RNCC: 3 | RNVC: 1
764-0680-000: RNCC: 5 | RNVC: 9
68RL: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-260-1643
Hand Reamer

002601643
B94.2: RNCC: 3 | RNVC: 1
21245: RNCC: 5 | RNVC: 2
712-046218: RNCC: 5 | RNVC: 2
C24522: RNCC: 5 | RNVC: 2
101-0-0.5625: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
A-A-2928: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
103HS 9/16 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-253-3181
Hand Reamer

002533181
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY2: RNCC: 5 | RNVC: 1
B94.2: RNCC: 5 | RNVC: 1
155-2-9: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL2GRASZ9: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-1141
Hand Reamer

005961141
B94.2: RNCC: 3 | RNVC: 1
764-1120-000: RNCC: 5 | RNVC: 9
112RL: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-180-0946
Single Bow Cutting Punch

001800946
5110-00-180-0946: RNCC: 3 | RNVC: 2
1280I: RNCC: 5 | RNVC: 2
43876: RNCC: 5 | RNVC: 2
GGG-P-833: RNCC: 5 | RNVC: 9
GGG-P-833 TY1CLBST2: RNCC: 5 | RNVC: 9
1280I: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-233-9681
Hand File

002339681
5110-00-233-9681: RNCC: 3 | RNVC: 2
A-A-2451: RNCC: 4 | RNVC: 1
37249: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
37249: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL10: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-203-9039
Hand Reamer

002039039
B94.2: RNCC: 3 | RNVC: 1
761-1120-000: RNCC: 5 | RNVC: 9
112RB: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-268-1292
Hand Reamer

002681292
B94.2: RNCC: 3 | RNVC: 1
50-10957: RNCC: 3 | RNVC: 2
4503: RNCC: 5 | RNVC: 1
901-1-4: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL2GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-243-0901
Hand Hacksaw Blade

002430901
GGG-B-451: RNCC: 4 | RNVC: 1
GGG-B-451 TY1GRACL1: RNCC: 5 | RNVC: 1
207: RNCC: 5 | RNVC: 2
1224: RNCC: 5 | RNVC: 9
R1224: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-092-2403
Hand Reamer

010922403
5110-10: RNCC: 3 | RNVC: 2

21 Mar 1980

5110-00-204-0716
Rip Hand Saw

002040716
GGG-S-65: RNCC: 4 | RNVC: 1

1 Jan 1963

5110-00-268-2896
Hand File

002682896
A-A-2316: RNCC: 4 | RNVC: 1
09179: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY13CL4: RNCC: 5 | RNVC: 9
09179: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-253-3169
Hand Reamer

002533169
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY2: RNCC: 5 | RNVC: 1
GGG-R-180 TY8CL2GRASZ3: RNCC: 5 | RNVC: 9
155-2-3: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-294-4606
Hand Reamer

002944606
J-5286-9C: RNCC: 3 | RNVC: 2
A-A-2930: RNCC: 4 | RNVC: 1
2AH832: RNCC: 5 | RNVC: 2
10881907: RNCC: 5 | RNVC: 2
10514045: RNCC: 5 | RNVC: 2
2AH832: RNCC: 5 | RNVC: 9
J-5286-9: RNCC: 5 | RNVC: 9
J5286-9C: RNCC: 5 | RNVC: 9
5110002944606: RNCC: 5 | RNVC: 9
5110002944606: RNCC: 6 | RNVC: 9

1 Jan 1963

5110-00-294-3032
Saw Handle

002943032
GGG-S-65: RNCC: 4 | RNVC: 1

1 Jan 1963

5110-00-293-3043
Hand Reamer

002933043
B94.2: RNCC: 3 | RNVC: 1
761-0620-000: RNCC: 5 | RNVC: 9
62RB: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-366-1466
Cylinder Ridge Reamer

003661466
8157279: RNCC: 3 | RNVC: 9
8157279: RNCC: 5 | RNVC: 2
295: RNCC: 5 | RNVC: 9
8035738: RNCC: 5 | RNVC: 9
8228303: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-640-0481
Tube Cutter Cutting Wheel

006400481
S32633: RNCC: 3 | RNVC: 9
32633: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-2869
Hand Reamer

005962869
153RB: RNCC: 3 | RNVC: 9
761-1530-000: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-8485
Hand Reamer

005968485
159RB: RNCC: 3 | RNVC: 9
761-1590-000: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-9344
Woodworking Butt Chisel

005969344
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY1CL3: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-595-9299
Hand Reamer

005959299
B94.2: RNCC: 3 | RNVC: 1
761-1060-000: RNCC: 5 | RNVC: 9
106RB: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-1220
Hand Cape Chisel

002931220
GGG-C-313: RNCC: 4 | RNVC: 1
GGG-C-313 TY1STA: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-249-2880
Hand File

002492880
A-A-2312: RNCC: 4 | RNVC: 1
05307: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY9STA: RNCC: 5 | RNVC: 9
05307: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-203-9036
Hand Reamer

002039036
B94.2: RNCC: 3 | RNVC: 1
761-1370-000: RNCC: 5 | RNVC: 9
137RB: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-384-5828
Tube Cutter

013845828
TC-1050: RNCC: 3 | RNVC: 2
TC-1050: RNCC: 3 | RNVC: 9
89232665: RNCC: 5 | RNVC: 2
TC1050: RNCC: 5 | RNVC: 9
89232665: RNCC: 5 | RNVC: 9

18 Dec 1993

5110-00-596-8656
Two Man Crosscut Saw

005968656
GGG-S-64: RNCC: 4 | RNVC: 1
GGG-S-64 TY2CL2STA: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-596-9319
Hand Metal Stamping Die

005969319
GGG-D-280: RNCC: 4 | RNVC: 1
GGG-D-280 TY2GRA: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-156-0039
Hand File

1 Jan 1963

5110-00-595-9279
Tube Fitting Male Flare Seat Refacing Tool

005959279
FRS 345FA: RNCC: 3 | RNVC: 2
345-FA: RNCC: 5 | RNVC: 9
345-FA: RNCC: 5 | RNVC: 9
98F: RNCC: 5 | RNVC: 9
99F: RNCC: 5 | RNVC: 9
345F: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-8649
Compass Saw

005968649
GGG-S-65: RNCC: 4 | RNVC: 1
GGG-S-65 TY4: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-596-1144
Hand Reamer

005961144
B94.2: RNCC: 3 | RNVC: 1
764-0870-000: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
87RL: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-8166
Paring Chisel

001868166
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY1CL8STA: RNCC: 5 | RNVC: 1

9 Oct 1974

5110-00-253-3153
Hand Reamer

002533153
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY2: RNCC: 5 | RNVC: 1
155-2-6/0: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL2GRASZ6/0: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-3026
Hand Reamer

002933026
B94.2: RNCC: 3 | RNVC: 1
78RL: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
764-0780-000: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-9342
Woodworking Butt Chisel

005969342
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY1CL3: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-596-7807
Woodworking Butt Chisel

005967807
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY1CL3: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-953-1191
Double Bow Cutting Punch

009531191
149-1-3/16: RNCC: 3 | RNVC: 2
3427A27: RNCC: 5 | RNVC: 2

1 Jan 1962

5110-00-555-9359
Coping Saw Frame

005559359
5110-00-555-9359: RNCC: 3 | RNVC: 2
2014400: RNCC: 3 | RNVC: 2
2014400: RNCC: 5 | RNVC: 9
A-A-3051: RNCC: 5 | RNVC: 9
GGG-F-671 TY7: RNCC: 5 | RNVC: 9
GGG-F-671: RNCC: 5 | RNVC: 9
2014400: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-644-2768
Hand File

016442768
FO-M-12B: RNCC: 3 | RNVC: 2
JA-005: RNCC: 5 | RNVC: 2

28 Apr 2015

5110-00-889-9585
Ship Scraper

008899585
A4: RNCC: 3 | RNVC: 9

1 Jan 1962

5110-01-343-5946
Scraper

013435946
21089-3: RNCC: 3 | RNVC: 9

15 Aug 1991

5110-00-017-8223
Razor Saw Set

000178223
5910644: RNCC: 3 | RNVC: 2
25300: RNCC: 5 | RNVC: 2
5300: RNCC: 5 | RNVC: 9

1 Jan 1961

5110-01-594-0308
Diagonal Cutting Pliers

015940308
B85CMP: RNCC: 3 | RNVC: 2

22 Apr 2011

5110-00-596-9343
Woodworking Butt Chisel

005969343
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY1CL3: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-01-430-5047
Pocket Folding Multi-Tool

014305047
61070101: RNCC: 3 | RNVC: 2
PST II: RNCC: 5 | RNVC: 1
HERRAMIENTA MULTIUSOS: RNCC: 5 | RNVC: 2
MD101-CG14F: RNCC: 5 | RNVC: 9
PCAMI/VE/V08C02A/02: RNCC: 5 | RNVC: 9

30 Apr 1996

5110-00-203-6893
Hand File

002036893
7932: RNCC: 3 | RNVC: 2
A-A-2308: RNCC: 4 | RNVC: 1
GGG-F-325 TY2CL2: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-005-2375
Lapping Tool

000052375
X14-0-86-1: RNCC: 3 | RNVC: 2

14 Jun 1972

5110-00-293-3422
Hand File

002933422
A-A-2443: RNCC: 4 | RNVC: 1
37451: RNCC: 5 | RNVC: 2
GGG-F-331 TY18CL2: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
37451: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-686-6845
Straight Trimmers Shears

016866845
SHEARS1BK: RNCC: 3 | RNVC: 2
SHEARS1BK: RNCC: 5 | RNVC: 2
SHEARS1BK: RNCC: 5 | RNVC: 2

28 Feb 2020

5110-01-563-5389
Diagonal Cutting Pliers

015635389
EPC160: RNCC: 3 | RNVC: 2

13 May 2008

5110-01-565-9100
Scraping Knife

015659100
PKB53A: RNCC: 3 | RNVC: 2

12 Aug 2008

5110-01-571-1612
Hand File

015711612
35073: RNCC: 3 | RNVC: 2
A-A-2441: RNCC: 4 | RNVC: 1
35073: RNCC: 5 | RNVC: 2
35073: RNCC: 5 | RNVC: 9

26 Jan 2009

5110-00-006-4543
Exposed Blade Tube Deburring Tool

000064543
D9849A: RNCC: 3 | RNVC: 2

16 Jul 1972

5110-01-654-0372
Hand File

016540372
SGF10R: RNCC: 3 | RNVC: 2

15 Apr 2016

5110-00-221-8107
Hand Cape Chisel

002218107
B107.410: RNCC: 3 | RNVC: 1
B107.48 TY1CL1: RNCC: 5 | RNVC: 1
B107.48: RNCC: 5 | RNVC: 1
G10-8107: RNCC: 5 | RNVC: 2
GGG-C-313 TY1STA: RNCC: 5 | RNVC: 9
GGG-C-313: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-3025
Hand Reamer

002933025
B94.2: RNCC: 3 | RNVC: 1
761-0780-000: RNCC: 5 | RNVC: 9
78RB: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-15-165-4212
Tronchese

151654212
412TN: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-22-221-2167
Hand Hacksaw Blade

222212167
NEDSTRYGERBKLINGE: RNCC: 3 | RNVC: 2

25 May 1979

5110-22-613-5132
Pliers

226135132
EREM 572: RNCC: 3 | RNVC: 2

20 Jun 2006

5110-27-011-7690
Hand Reamer

270117690
09013KR1053: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-01-684-5702
Exposed Blade Tube Deburring Tool

016845702
BAT-DBUR6: RNCC: 3 | RNVC: 2

6 Nov 2019

5110-14-244-0710

5110-00-293-1487
Hand File

002931487
A-A-2434: RNCC: 4 | RNVC: 1
39899: RNCC: 5 | RNVC: 2
GGG-F-331 TY11CL3: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
39899: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-446-1062
Safety Knife Blade

004461062
BLADE: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-678-0706
Hand Reamer

016780706
CBR-6-2-N-1-.2182: RNCC: 3 | RNVC: 2

18 Jan 2019

5110-01-675-0118
Craftsman's Knife

016750118
16001: RNCC: 3 | RNVC: 2
06530901: RNCC: 5 | RNVC: 2

17 Aug 2018

5110-01-677-9040
Pin Loader

016779040
MCC - PIN LOADER - 350: RNCC: 3 | RNVC: 2

11 Jan 2019

5110-01-673-8287
Diagonal Cutting Pliers

016738287
P88145: RNCC: 3 | RNVC: 2

28 Jun 2018

5110-01-674-8049
Electricians' Scissors

016748049
758TW220: RNCC: 3 | RNVC: 2

10 Aug 2018

5110-01-670-9247
Diagonal Cutting Pliers

016709247
B107.500: RNCC: 3 | RNVC: 1
P954HL: RNCC: 3 | RNVC: 2
B107.500 CAT11 TY1CL3: RNCC: 5 | RNVC: 1
B107.11 TY1CL3: RNCC: 5 | RNVC: 9
B107.11: RNCC: 5 | RNVC: 9

12 Mar 2018

5110-01-671-2557
Craftsman's Knife

016712557
61011SS: RNCC: 3 | RNVC: 2

20 Mar 2018

5110-01-662-5345
Diagonal Cutting Pliers

016625345
EK 1550: RNCC: 3 | RNVC: 2

11 Apr 2017

5110-01-662-6227
Hand File

016626227
903666AU: RNCC: 3 | RNVC: 2

13 Apr 2017

5110-01-663-3949
Craftsman's Knife

016633949
S7581B: RNCC: 3 | RNVC: 2

8 May 2017

5110-01-662-5344
Diagonal Cutting Pliers

016625344
EK 1800: RNCC: 3 | RNVC: 2

11 Apr 2017

5110-01-661-6702
Hand Metal Stamping Die Set

016616702
2215OPD: RNCC: 3 | RNVC: 2
11A7000125: RNCC: 7 | RNVC: 2

13 Mar 2017

5110-01-661-1876
Keyhole Saw

016611876
WL6C: RNCC: 3 | RNVC: 2

21 Feb 2017

5110-01-662-8396
Hand Operated Wire Rope Cutter

016628396
MODEL P-1125: RNCC: 3 | RNVC: 2

20 Apr 2017

5110-01-661-6691
Thread Restorer File

016616691
2: RNCC: 3 | RNVC: 2
11A7000010: RNCC: 7 | RNVC: 2

13 Mar 2017

5110-01-613-6908
Hand Wire Stripper

016136908
PWC5A: RNCC: 3 | RNVC: 2

14 Nov 2012

5110-01-658-7527
Hand Operated Cable Cutter

016587527
63607: RNCC: 3 | RNVC: 2

14 Oct 2016

5110-01-656-5670
Pocket Folding Multi-Tool

016565670
TSPWP: RNCC: 3 | RNVC: 2
TOPHT0001: RNCC: 5 | RNVC: 2

8 Jul 2016

5110-01-652-2178
Hand Operated Cable Cutter

016522178
52107: RNCC: 3 | RNVC: 9

12 Feb 2016

5110-01-594-0307
Diagonal Cutting Pliers

015940307
B85CTMP: RNCC: 3 | RNVC: 2

22 Apr 2011

5110-01-645-9915
Fireman's Strap Cutting Knife

016459915
8 95255 00211 0: RNCC: 3 | RNVC: 2
511000060: RNCC: 5 | RNVC: 2

8 Jul 2015

5110-01-645-8368
Knockout Punch And Die

016458368
125T015-300C: RNCC: 3 | RNVC: 2

30 Jun 2015

5110-01-644-5342
Pocket Knife

016445342
1.3703.T7: RNCC: 3 | RNVC: 2

11 May 2015

5110-01-644-0404
Hand Metal Stamping Die

016440404
20951M: RNCC: 3 | RNVC: 2

20 Apr 2015

5110-01-644-0390
Hand Metal Stamping Die

016440390
20951D: RNCC: 3 | RNVC: 2

20 Apr 2015

5110-01-644-0778
Metal Cutting Hand Saw

016440778
20-807: RNCC: 3 | RNVC: 2
0381 3304: RNCC: 5 | RNVC: 2

21 Apr 2015

5110-00-595-9295
Hand Reamer

005959295
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY6GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
207-2-0.50000: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-8900
Pipe Cutter

005968900
GGG-C-771: RNCC: 4 | RNVC: 1
GGG-C-771 TY1CL1STA: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-01-642-0147
Fibre Handler Track

016420147
HAN-TRACK: RNCC: 3 | RNVC: 2
HAN-TRACK: RNCC: 5 | RNVC: 2

10 Feb 2015

5110-01-644-0362
Hand Metal Stamping Die

016440362
20951Q: RNCC: 3 | RNVC: 2

20 Apr 2015

5110-01-647-6499
Diagonal Cutting Pliers

016476499
312CP: RNCC: 3 | RNVC: 2

27 Aug 2015

5110-01-608-2507
Diagonal Cutting Pliers

016082507
175D: RNCC: 3 | RNVC: 2

21 Jun 2012

5110-01-608-3105
Bolt Cutter

016083105
81475: RNCC: 3 | RNVC: 2
81475: RNCC: 3 | RNVC: 9

22 Jun 2012

5110-01-266-1971
Hand Reamer

012661971
SPT6-74D110174-5001TD: RNCC: 3 | RNVC: 2
TF02134-1: RNCC: 5 | RNVC: 2

22 Oct 1987

5110-01-267-1893
Cutter Link

012671893
625-1240-002: RNCC: 3 | RNVC: 2

6 Nov 1987

5110-01-266-1965
Hand Reamer

012661965
SPT19-74D110174-5001TD: RNCC: 3 | RNVC: 2
TF02147-1: RNCC: 5 | RNVC: 2

22 Oct 1987

5110-01-246-3040
Hand Graver

012463040
34094: RNCC: 3 | RNVC: 2
42-036-02: RNCC: 5 | RNVC: 9

11 Dec 1986

5110-01-352-7277
Cutting Punch

013527277
3210739: RNCC: 3 | RNVC: 2

30 Jan 1992

5110-01-301-2750
Cutting Punchpliers

013012750
DIE5/32IN: RNCC: 3 | RNVC: 2

26 May 1989

5110-01-377-2237
Hand Wire Stripper

013772237
55-1500: RNCC: 3 | RNVC: 2
55-1500: RNCC: 5 | RNVC: 2
45-1500: RNCC: 5 | RNVC: 2
45-1500: RNCC: 5 | RNVC: 9
45-1500: RNCC: 5 | RNVC: 9

9 Jul 1993

5110-01-337-0686
Hand Cold Chisel

013370686
101: RNCC: 3 | RNVC: 2
101: RNCC: 5 | RNVC: 9

9 Apr 1991

5110-01-365-8658
Hand File

013658658
73-39900: RNCC: 3 | RNVC: 2
73-39900 SIMONDS: RNCC: 5 | RNVC: 2

15 Oct 1992

5110-01-358-4917
Hand Leather Stamping Die Set

013584917
310080500: RNCC: 3 | RNVC: 2

14 May 1992

5110-01-530-4371
Compass Saw Blade

015304371
49682: RNCC: 3 | RNVC: 2
D2006S: RNCC: 5 | RNVC: 2
35766: RNCC: 5 | RNVC: 9
D-1008: RNCC: 5 | RNVC: 9

26 May 2005

5110-01-650-3749
Diagonal Cutting Pliers

016503749
632N: RNCC: 3 | RNVC: 2

1 Dec 2015

5110-01-434-9484
Hand File

014349484
08243: RNCC: 3 | RNVC: 9
08243: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-428-6171
Honing Guide

014286171
14-050: RNCC: 3 | RNVC: 2
00.07.87.11: RNCC: 5 | RNVC: 2
5R743: RNCC: 5 | RNVC: 2
14-050: RNCC: 5 | RNVC: 2
00.07.87.11: RNCC: 5 | RNVC: 9

28 Mar 1996

5110-01-668-5266
Hand Operated Wire Rope Cutter

016685266
DIAMOND WIRE BLADE: RNCC: 3 | RNVC: 9

28 Nov 2017

5110-01-452-2918
Pocket Folding Multi-Tool

014522918
3565-1: RNCC: 3 | RNVC: 9
MULTIMASTER/KUTMASTER: RNCC: 5 | RNVC: 1
3565-1 KUTMASTER: RNCC: 5 | RNVC: 2

22 Jan 1998

5110-01-429-7386
Hand Metal Cutting Shears

014297386
B107.500: RNCC: 3 | RNVC: 1
20SL: RNCC: 3 | RNVC: 2
B107.500 CAT 16 TY2CL5: RNCC: 5 | RNVC: 1
DAL9A: RNCC: 5 | RNVC: 2
B107.16M: RNCC: 5 | RNVC: 9
20SL: RNCC: 5 | RNVC: 9
20SL: RNCC: 5 | RNVC: 9
B107.16: RNCC: 5 | RNVC: 9
3909: RNCC: 5 | RNVC: 9
B107.16 TY2CL5: RNCC: 5 | RNVC: 9

17 Apr 1996

5110-01-473-9714
Hand Hacksaw Blade

014739714
62749: RNCC: 3 | RNVC: 2
NIC 62749: RNCC: 5 | RNVC: 2
62749: RNCC: 5 | RNVC: 9

20 Apr 2000

5110-01-521-0233
Dimpling Die

015210233
ZT175201-1-8: RNCC: 3 | RNVC: 2

7 Jun 2004

5110-01-518-6109
Exposed Blade Tube Deburring Tool

015186109
60161: RNCC: 3 | RNVC: 2

17 Mar 2004

5110-01-142-6591
Seal Cutter

011426591
8142913: RNCC: 3 | RNVC: 2
8142913: RNCC: 5 | RNVC: 9

18 Nov 1982

5110-01-117-7863
Butt Marker

011177863
14-375: RNCC: 3 | RNVC: 9
14-375: RNCC: 5 | RNVC: 9

23 Aug 1981

5110-01-116-6995
Hand Cape Chisel

011166995
C-5A: RNCC: 3 | RNVC: 2
C-5A: RNCC: 5 | RNVC: 9

1 Aug 1981

5110-00-025-2278
Hand Reamer

000252278
B94.2: RNCC: 3 | RNVC: 1
115RL: RNCC: 5 | RNVC: 9
115RL: RNCC: 5 | RNVC: 9
764-1150-000: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-131-7094
Diagonal Cutting Pliers

011317094
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 11 TY1CL1: RNCC: 5 | RNVC: 1
387A: RNCC: 5 | RNVC: 2
387A: RNCC: 5 | RNVC: 2
387: RNCC: 5 | RNVC: 9
B107.11: RNCC: 5 | RNVC: 9
B107.11 TY1CL1: RNCC: 5 | RNVC: 9

14 May 1982

5110-01-004-5953
Die Assembly Ram

010045953
ZT175202-1-8: RNCC: 3 | RNVC: 2

10 Jun 1975

5110-01-552-4903
Hand Optical Fiber Cleaving Tool

015524903
CT-30: RNCC: 3 | RNVC: 2

14 Jun 2007

5110-00-596-9334
Compass Saw Blade

005969334
GGG-S-65: RNCC: 4 | RNVC: 1
GGG-S-65 TY4: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-540-6216
Hand Metal Stamping Die Set

005406216
GGG-D-280: RNCC: 4 | RNVC: 1
GGG-D-280 TY1GRB: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-186-4210
Hand Reamer

001864210
5110-00-186-4210: RNCC: 3 | RNVC: 2
261-0-8: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY14CL1GRASZ8: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-6702
Hand Reamer

001866702
B94.2: RNCC: 3 | RNVC: 1
101-0-0.3594: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-188-0784
Hand Reamer

001880784
207-2-2.5000: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-194-5982
Hand Reamer

001945982
B94.2: RNCC: 3 | RNVC: 1
21256: RNCC: 5 | RNVC: 2
712-047216: RNCC: 5 | RNVC: 2
101-0-1.3750: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-199-7287
Hand Reamer

001997287
B94.2: RNCC: 3 | RNVC: 1
C24607: RNCC: 3 | RNVC: 2
21255: RNCC: 5 | RNVC: 2
712-047117: RNCC: 5 | RNVC: 2
GGG-R-180: RNCC: 5 | RNVC: 9
4100-1250: RNCC: 5 | RNVC: 9
24607: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
101-0-1.2500: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-632-1952
Hand Wire Stripper

016321952
55-1987: RNCC: 3 | RNVC: 2

9 Oct 2014

5110-01-615-6328
Pocket Knife

016156328
22-41965: RNCC: 3 | RNVC: 2

17 Jan 2013

5110-01-620-5800
Pocket Knife

016205800
TRP.100-010: RNCC: 3 | RNVC: 2

31 Jul 2013

5110-01-677-9070
Hand Operated Cable Cutter

016779070
MCC: RNCC: 3 | RNVC: 2

11 Jan 2019

5110-00-243-2016
Hand Reamer

002432016
B94.2: RNCC: 3 | RNVC: 1
C24593: RNCC: 3 | RNVC: 2
21254: RNCC: 5 | RNVC: 2
712-047018: RNCC: 5 | RNVC: 2
101-0-1.1250: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
24593: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-253-3182
Hand Reamer

002533182
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY1: RNCC: 5 | RNVC: 1
375B504-016A: RNCC: 5 | RNVC: 2
155-0-9: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL1GRASZ9: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-253-3175
Hand Reamer

002533175
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY2: RNCC: 5 | RNVC: 1
155-2-6: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL2GRASZ6: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-253-3176
Hand Reamer

002533176
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY1: RNCC: 5 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL1GRASZ6: RNCC: 5 | RNVC: 9
155-0-6: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-260-1727
Hand Reamer

002601727
A-A-2937: RNCC: 4 | RNVC: 1
570 H: RNCC: 5 | RNVC: 2
C38559: RNCC: 5 | RNVC: 2
22771: RNCC: 5 | RNVC: 2
43-485-2: RNCC: 5 | RNVC: 2
610-0-H: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
30540: RNCC: 5 | RNVC: 9
30540: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL1GRASZH: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-268-1311
Hand Reamer

002681311
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
207-2-1.0000: RNCC: 5 | RNVC: 9
GGG-R-180 TY6GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-268-1253
Hand Reamer

002681253
B94.2: RNCC: 3 | RNVC: 1
21232: RNCC: 5 | RNVC: 2
712-045319: RNCC: 5 | RNVC: 2
C24406: RNCC: 5 | RNVC: 2
A-A-2928: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
103HS 5/32 IN.: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
101-0-0.1562: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-656-4377
Lathing Hatchet

016564377
B107.400: RNCC: 3 | RNVC: 1
B107.42: RNCC: 5 | RNVC: 1
B107.42 CL1: RNCC: 5 | RNVC: 1
RBFG: RNCC: 5 | RNVC: 2

30 Jun 2016

5110-01-659-6768
Pliers

016596768
TOOL ROLL-2: RNCC: 3 | RNVC: 2

8 Dec 2016

5110-01-596-9420
Hand Cable Stripper

015969420
272ST010: RNCC: 3 | RNVC: 2

25 May 2011

5110-01-596-9816
Pocket Knife

015969816
KER1670RDSO: RNCC: 3 | RNVC: 2

25 May 2011

5110-01-595-6991
Knife Blade

015956991
X207: RNCC: 3 | RNVC: 2
X207: RNCC: 5 | RNVC: 9

4 May 2011

5110-01-595-6993
Knife Blade

015956993
X202: RNCC: 3 | RNVC: 2
X202: RNCC: 5 | RNVC: 9

4 May 2011

5110-01-597-6232
Hand Wire Stripper

015976232
45-2118: RNCC: 3 | RNVC: 2

16 Jun 2011

5110-00-260-1702
Hand Reamer

002601702
A-A-2937: RNCC: 4 | RNVC: 1
570 4/A: RNCC: 5 | RNVC: 2
C38549: RNCC: 5 | RNVC: 2
43-475-3: RNCC: 5 | RNVC: 2
38549: RNCC: 5 | RNVC: 2
22761: RNCC: 5 | RNVC: 2
610-0-4/A: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
38549: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL1GRASZ4/A: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-253-3173
Hand Reamer

002533173
A-A-2930: RNCC: 4 | RNVC: 1
A-A-2930 TY2: RNCC: 5 | RNVC: 1
155-2-5: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL2GRASZ5: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-233-9713
Hand Rasp

002339713
A-A-2329: RNCC: 4 | RNVC: 1
19493: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
19493: RNCC: 5 | RNVC: 9
GGG-F-325 TY27CL2STA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-233-9711
Hand Rasp

002339711
19427: RNCC: 3 | RNVC: 2
A-A-2329: RNCC: 4 | RNVC: 1
NIC 19427N: RNCC: 5 | RNVC: 2
GGG-F-325 TY27CL2STA: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
19427: RNCC: 5 | RNVC: 9
13141001: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-564-0740
Hand Wire Stripper

015640740
B107.500: RNCC: 3 | RNVC: 1
45-2131: RNCC: 3 | RNVC: 2
B107.37: RNCC: 5 | RNVC: 1
B107.37 TY1CL1: RNCC: 5 | RNVC: 1

3 Jun 2008

5110-01-589-8821
Hand File

015898821
78-398600: RNCC: 3 | RNVC: 2
SIM 78-398600: RNCC: 5 | RNVC: 9

7 Nov 2010

5110-01-582-0553
Hand Metal Cutting Shears

015820553
580519: RNCC: 3 | RNVC: 2

5 Feb 2010

5110-01-575-9138
Drill Reamer

015759138
3854AS400-24: RNCC: 3 | RNVC: 2
3854AS400-24: RNCC: 5 | RNVC: 2
3854AS400-24: RNCC: 5 | RNVC: 2
3854AS400-24: RNCC: 5 | RNVC: 2
3854AS400-24: RNCC: 5 | RNVC: 2
3854AS400-24: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-531-8327
Tool-Initiator Cock

015318327
LA-AG1744: RNCC: 3 | RNVC: 2

21 Jul 2005

5110-01-536-3960
Embroidery Scissors

015363960
758SC134: RNCC: 3 | RNVC: 2

3 Jan 2006

5110-01-642-0666
Hand Cold Chisel

016420666
J86078: RNCC: 3 | RNVC: 2

11 Feb 2015

5110-01-650-3758
Bolt Cutter

016503758
TRX1018-18: RNCC: 3 | RNVC: 2

1 Dec 2015

5110-01-643-4157
Hand Cold Chisel

016434157
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1
J86A3/4X8: RNCC: 5 | RNVC: 2
B107.48: RNCC: 5 | RNVC: 9
B107.48 TY1CL1: RNCC: 5 | RNVC: 9

1 Apr 2015

5110-00-186-8164
Firmer Chisel

001868164
GGG-C-311: RNCC: 4 | RNVC: 1
11B: RNCC: 5 | RNVC: 1
GGG-C-311 TY1CL4STA: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-203-4714
Hand File

002034714
A-A-2320: RNCC: 4 | RNVC: 1
GGG-F-325 TY17STB: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-203-9034
Hand Reamer

002039034
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
761-1210-000: RNCC: 5 | RNVC: 9
121RB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-99-362-4703
Ball Pin Extractor

993624703
MC1278070: RNCC: 3 | RNVC: 2

17 May 2002

5110-15-137-8453
Levachiodi Con Scal

151378453
3594: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-01-390-9712
Hand Reamer

013909712
B94.2: RNCC: 3 | RNVC: 1
12901131: RNCC: 5 | RNVC: 2

2 Jun 1994

5110-12-129-5508

5110-01-621-4767
Knife Blade

016214767
5110-00-NIB-0056: RNCC: 3 | RNVC: 2
510009201N: RNCC: 3 | RNVC: 2
AB-10B: RNCC: 5 | RNVC: 2

9 Sep 2013

5110-01-614-6613
Hand Reamer

016146613
FSR-1445-10210A: RNCC: 3 | RNVC: 2

12 Dec 2012

5110-01-625-9282
Knockout Punch And Die Set

016259282
MP4153: RNCC: 3 | RNVC: 2

20 Feb 2014

5110-01-625-9152
End Cutting Nippers

016259152
SA7141091: RNCC: 3 | RNVC: 2

20 Feb 2014

5110-01-521-4812
Knife Blade Set

015214812
P63680B: RNCC: 3 | RNVC: 2
ENVISION PLOTTER, 60GR BLADE: RNCC: 5 | RNVC: 2

23 Jun 2004

5110-01-520-8289
Hand File Set

015208289
8182A12: RNCC: 3 | RNVC: 2

27 May 2004

5110-01-664-3284
Tube Cutter

016643284
1U-7648: RNCC: 3 | RNVC: 2

15 Jun 2017

5110-01-621-0782
Diagonal Cutting Pliers

016210782
FA-190.16VE: RNCC: 3 | RNVC: 2

22 Aug 2013

5110-01-605-9605
Block Plane

016059605
EA68531-2: RNCC: 3 | RNVC: 2

2 May 2012

5110-01-669-5806
Pocket Folding Multi-Tool

016695806
831647: RNCC: 3 | RNVC: 2

12 Jan 2018

5110-01-694-8085
Hand File Set

016948085
SGHBF600A: RNCC: 3 | RNVC: 2

26 Apr 2021

5110-01-694-6955
Hand Wire Stripper

016946955
B107.500: RNCC: 3 | RNVC: 1
393510: RNCC: 3 | RNVC: 2
B107.500 CAT 37 TY1CL1: RNCC: 5 | RNVC: 1
393510: RNCC: 5 | RNVC: 2

18 Apr 2021

5110-01-689-9914
Push Drill

016899914
CDRR761: RNCC: 3 | RNVC: 2

21 Jul 2020

5110-01-697-4839
Hand File Set

016974839
22030HNN: RNCC: 3 | RNVC: 2

22 Sep 2021

5110-01-685-3229
Hand Cable Stripper

016853229
45-403: RNCC: 3 | RNVC: 2

11 Dec 2019

5110-01-685-3137
Hand Cable Stripper

016853137
45-404: RNCC: 3 | RNVC: 2

11 Dec 2019

5110-01-658-0248
Revolving Head Cutting Punch

016580248
155 1-6: RNCC: 3 | RNVC: 2
155 1-6: RNCC: 5 | RNVC: 2
155 1-6: RNCC: 5 | RNVC: 9

9 Sep 2016

5110-01-656-7759
Knockout Punch And Die Set

016567759
24003: RNCC: 3 | RNVC: 2

18 Jul 2016

5110-01-159-1810
Pilot Body Bushing

011591810
J-28489-4: RNCC: 3 | RNVC: 2
2CC661: RNCC: 5 | RNVC: 2
2CC661: RNCC: 5 | RNVC: 9

4 Aug 1983

5110-01-650-6010
Hand Optical Fiber Cleaving Tool

016506010
KC-699: RNCC: 3 | RNVC: 2

11 Dec 2015

5110-01-654-0163
Diagonal Cutting Pliers

016540163
BDG311CP: RNCC: 3 | RNVC: 2

14 Apr 2016

5110-01-648-0630
Hand Hacksaw Blade

016480630
HSM632: RNCC: 3 | RNVC: 2

14 Sep 2015

5110-01-646-1205
Pocket Scissors

016461205
A601050: RNCC: 3 | RNVC: 2
A601050: RNCC: 3 | RNVC: 9

14 Jul 2015

5110-01-648-7194
Knife Blade

016487194
K93987: RNCC: 3 | RNVC: 2

5 Oct 2015

5110-01-649-6548
Hand Hacksaw Blade

016496548
B94.52M: RNCC: 3 | RNVC: 1
1224BI: RNCC: 3 | RNVC: 2
1224HS: RNCC: 5 | RNVC: 9
ZLW0010: RNCC: 5 | RNVC: 9
ZHVY0046: RNCC: 5 | RNVC: 9

5 Nov 2015

5110-01-643-0227
Pocket Knife

016430227
KER1660CBSO: RNCC: 3 | RNVC: 2

17 Mar 2015

5110-01-644-0392
Hand Metal Stamping Die

016440392
20951E: RNCC: 3 | RNVC: 2

20 Apr 2015

5110-01-644-0375
Hand Metal Stamping Die

016440375
20951Y: RNCC: 3 | RNVC: 2

20 Apr 2015

5110-01-216-9698
Cable Stripper Blade

012169698
45-1929-1: RNCC: 3 | RNVC: 2

20 Sep 1985

5110-01-641-9161
Hand Wire Stripper

016419161
B107.500: RNCC: 3 | RNVC: 1
1010: RNCC: 3 | RNVC: 2
B107.500 CAT 37 TY2CL2: RNCC: 5 | RNVC: 1
B107.37: RNCC: 5 | RNVC: 9
B107.37 TY2CL2: RNCC: 5 | RNVC: 9

6 Feb 2015

5110-01-232-0014
Stripping Tool

012320014
901-E: RNCC: 3 | RNVC: 2
WS-2: RNCC: 5 | RNVC: 2
WS-2: RNCC: 5 | RNVC: 2

7 May 1986

5110-01-632-4692
Mud Pan

016324692
G05224: RNCC: 3 | RNVC: 2

21 Oct 2014

5110-01-629-8589
Hand Bench Shears

016298589
MSM-1462: RNCC: 3 | RNVC: 2
11B5190107: RNCC: 7 | RNVC: 2

16 Jul 2014

5110-01-630-7215
Hand Reamer

016307215
4068-HF: RNCC: 3 | RNVC: 2

15 Aug 2014

5110-01-631-6995
Pocket Knife

016316995
KER-1730: RNCC: 3 | RNVC: 2

23 Sep 2014

5110-01-131-3369
Cutting And Skinning Tool Attachment

011313369
99050726: RNCC: 3 | RNVC: 2
99050726: RNCC: 5 | RNVC: 9
515653: RNCC: 5 | RNVC: 9

7 May 1982

5110-01-250-0467
Wire Stripper Blade

012500467
L-4419: RNCC: 3 | RNVC: 2

24 Feb 1987

5110-01-530-3786
Rivet Cutter

015303786
04-501: RNCC: 3 | RNVC: 2

24 May 2005

5110-01-606-5265
Exposed Blade Tube Deburring Tool

016065265
64113: RNCC: 3 | RNVC: 2

18 May 2012

5110-01-288-3430
Dimpling Punch

012883430
ZT3855-3/16: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-588-0060
Brick Chisel

015880060
16-327: RNCC: 3 | RNVC: 2
STP 16-327: RNCC: 5 | RNVC: 2

29 Aug 2010

5110-01-274-3592
Scraping Knife

012743592
10-194: RNCC: 3 | RNVC: 2

8 Mar 1988

5110-01-579-5952
Sealant Scraper

015795952
NYZ700110: RNCC: 3 | RNVC: 2

18 Nov 2009

5110-01-579-7574
Hand Cable Stripper

015797574
45-520: RNCC: 3 | RNVC: 2

23 Nov 2009

5110-01-274-2404
Hand Reamer

012742404
1213D1597FIND21: RNCC: 3 | RNVC: 2
RE2037: RNCC: 5 | RNVC: 9
1213D1597FIND21: RNCC: 5 | RNVC: 9

6 Mar 1988

5110-01-593-1816
Straight Trimmers Shears

015931816
HCS2036-01-053K: RNCC: 3 | RNVC: 2

4 Apr 2011

5110-01-595-0371
Pliers

015950371
J28270: RNCC: 3 | RNVC: 2
28270: RNCC: 5 | RNVC: 9

25 Apr 2011

5110-01-590-3149
Craftsman's Knife

015903149
830079: RNCC: 3 | RNVC: 2

30 Nov 2010

5110-01-288-3458
Knockout Punch And Die

012883458
ZT2912-3-16: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-288-3447
Knockout Punch And Die

012883447
ZT1748-10: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-288-3468
Knockout Punch And Die

012883468
ZT2968-10: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-288-3451
Knockout Punch And Die

012883451
ZT1855-1-8: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-288-3466
Knockout Punch And Die

012883466
ZT2963-6: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-289-7037
Knockout Punch And Die

012897037
ZT1855-3-32: RNCC: 3 | RNVC: 2

28 Nov 1988

5110-01-301-7392
Hand Cable Stripper

013017392
KTJ19: RNCC: 3 | RNVC: 9

2 Jun 1989

5110-01-301-2743
Cutting Punchplier

013012743
DIE3/32IN: RNCC: 3 | RNVC: 2

26 May 1989

5110-01-652-6770
Diagonal Cutting Pliers

016526770
272PL565: RNCC: 3 | RNVC: 2
P55N: RNCC: 5 | RNVC: 2

1 Mar 2016

5110-01-661-6299
Hand Metal Stamping Die Set

016616299
24007: RNCC: 3 | RNVC: 2
11A7000032: RNCC: 7 | RNVC: 2

10 Mar 2017

5110-01-660-8499
Hand Rasp

016608499
5-21-508: RNCC: 3 | RNVC: 2

7 Feb 2017

5110-01-671-7488
Knockout Die

016717488
KD2000B: RNCC: 3 | RNVC: 2

9 Apr 2018

5110-01-672-8055
Cut Out Blade

016728055
992/12801: RNCC: 3 | RNVC: 2

17 May 2018

5110-01-672-4304
Hand Metal Cutting Shears

016724304
J2102S: RNCC: 3 | RNVC: 2
2102S: RNCC: 5 | RNVC: 9

1 May 2018

5110-01-672-4307
Hand Metal Cutting Shears

016724307
J2101R: RNCC: 3 | RNVC: 2
2101R: RNCC: 5 | RNVC: 9

1 May 2018

5110-01-618-9278
Pipe Cutter

016189278
27645A11: RNCC: 3 | RNVC: 2

10 May 2013

5110-01-313-6303
Diagonal Cutting Pliers

013136303
P02-CH: RNCC: 3 | RNVC: 9

12 Jan 1990

5110-01-309-5991
Stripping Tool

013095991
603995-2: RNCC: 3 | RNVC: 2

20 Oct 1989

5110-01-627-3355
Wire Stripper Blade

016273355
AS5768/1-B15: RNCC: 3 | RNVC: 2

10 Apr 2014

5110-01-231-5714
Stripping Tool

012315714
901-8: RNCC: 3 | RNVC: 2
WS-13: RNCC: 5 | RNVC: 2
WS-13: RNCC: 5 | RNVC: 2

30 Apr 1986

5110-01-541-0985
Bent Trimmers Shears

015410985
9451: RNCC: 3 | RNVC: 2
5LM50: RNCC: 5 | RNVC: 2

15 Jun 2006

5110-01-335-1523
Hand Cable Stripper

013351523
PWC33: RNCC: 3 | RNVC: 2

6 Mar 1991

5110-01-335-1370
Scraping Knife

013351370
PK32: RNCC: 3 | RNVC: 2

6 Mar 1991

5110-01-335-0611
Hand Cold Chisel

013350611
B107.410: RNCC: 3 | RNVC: 1
B107.48: RNCC: 5 | RNVC: 1
B107.48 TY1CL2: RNCC: 5 | RNVC: 1
33-100: RNCC: 5 | RNVC: 2
33-100: RNCC: 5 | RNVC: 9

5 Mar 1991

5110-01-658-7963
Craftsman's Knife

016587963
DK06: RNCC: 3 | RNVC: 2

18 Oct 2016

5110-01-658-7066
Hand File Set

016587066
72-758790: RNCC: 3 | RNVC: 2
72758790: RNCC: 5 | RNVC: 2

12 Oct 2016

5110-01-428-9676
Sheet Metal Scraper

014289676
ATI514: RNCC: 3 | RNVC: 2
AT514: RNCC: 5 | RNVC: 9

3 Apr 1996

5110-01-429-7313
Hand Metal Cutting Shears

014297313
B107.500: RNCC: 3 | RNVC: 1
CD10A: RNCC: 3 | RNVC: 2
B107.500 CAT 16 TY1CL2: RNCC: 5 | RNVC: 1

17 Apr 1996

5110-01-645-9510
Hand Diamond Point Chisel

016459510
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL4: RNCC: 5 | RNVC: 1
J765/8S2: RNCC: 5 | RNVC: 2
B107.48: RNCC: 5 | RNVC: 9
B107.48 TY1CL4: RNCC: 5 | RNVC: 9

6 Jul 2015

5110-01-653-1562
Pocket Folding Multi-Tool

016531562
SIGNAL-439: RNCC: 3 | RNVC: 2

14 Mar 2016

5110-01-690-7599
Tube Cutter

016907599
152-6027-4: RNCC: 3 | RNVC: 2

31 Aug 2020

5110-01-563-9471
Hand File

015639471
21694H: RNCC: 3 | RNVC: 2
21694H: RNCC: 5 | RNVC: 9

30 May 2008

5110-01-327-6076
Hand Metal Cutting Shears

013276076
S-59: RNCC: 3 | RNVC: 2
S-59: RNCC: 5 | RNVC: 9

17 Oct 1990

5110-01-327-6950
File Handle

013276950
GA615: RNCC: 3 | RNVC: 1
RT5: RNCC: 3 | RNVC: 2

21 Oct 1990

5110-01-688-1972
Tube Cutter

016881972
RCM-160: RNCC: 3 | RNVC: 2
5522934: RNCC: 5 | RNVC: 2

7 May 2020

5110-01-686-5870
Hand Operated Cable Cutter

016865870
49-16-2772: RNCC: 3 | RNVC: 2

25 Feb 2020

5110-01-686-1605
Pocket Folding Multi-Tool

016861605
AVAR15T: RNCC: 3 | RNVC: 2

3 Feb 2020

5110-01-688-0573
Sealant Removal Scraper

016880573
310/37: RNCC: 3 | RNVC: 2

30 Apr 2020

5110-01-322-5548
Deburring Footpiece

013225548
ZT339011: RNCC: 3 | RNVC: 2

9 Jul 1990

5110-01-322-5544
Die Heater

013225544
ZT1981D10: RNCC: 3 | RNVC: 2

9 Jul 1990

5110-01-550-3154
Knife Sheath

015503154
44AK01OD: RNCC: 3 | RNVC: 2
44AK01OD: RNCC: 3 | RNVC: 9

16 Apr 2007

5110-01-575-9133
Piloted Reamer

015759133
3854AS300-46: RNCC: 3 | RNVC: 2
3854AS300-46: RNCC: 5 | RNVC: 2
3854AS300-46: RNCC: 5 | RNVC: 2
3854AS300-46: RNCC: 5 | RNVC: 2
3854AS300-46: RNCC: 5 | RNVC: 2
3854AS300-46: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9114
Piloted Reamer

015759114
3854AS300-4: RNCC: 3 | RNVC: 2
3854AS300-4: RNCC: 5 | RNVC: 2
3854AS300-4: RNCC: 5 | RNVC: 2
3854AS300-4: RNCC: 5 | RNVC: 2
3854AS300-4: RNCC: 5 | RNVC: 2
3854AS300-4: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-578-9362
Hand Cable Stripper

015789362
45-401: RNCC: 3 | RNVC: 2
45-401: RNCC: 5 | RNVC: 2

26 Oct 2009

5110-01-576-3400
End Cutting Nippers

015763400
350860: RNCC: 3 | RNVC: 2
ZB0350860: RNCC: 5 | RNVC: 2
0350860: RNCC: 5 | RNVC: 2
787145: RNCC: 5 | RNVC: 9

28 Jul 2009

5110-01-578-9371
Cable Stripper Blade

015789371
K-6492: RNCC: 3 | RNVC: 2
K-6492: RNCC: 5 | RNVC: 2

26 Oct 2009

5110-01-575-9105
Drill Reamer

015759105
3854AS500-7: RNCC: 3 | RNVC: 2
3854AS500-7: RNCC: 5 | RNVC: 2
3854AS500-7: RNCC: 5 | RNVC: 2
3854AS500-7: RNCC: 5 | RNVC: 2
3854AS500-7: RNCC: 5 | RNVC: 2
3854AS500-7: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9163
Piloted Reamer

015759163
3854AS300-25: RNCC: 3 | RNVC: 2
3854AS300-25: RNCC: 5 | RNVC: 2
3854AS300-25: RNCC: 5 | RNVC: 2
3854AS300-25: RNCC: 5 | RNVC: 2
3854AS300-25: RNCC: 5 | RNVC: 2
3854AS300-25: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9139
Piloted Reamer

015759139
3854AS300-47: RNCC: 3 | RNVC: 2
3854AS300-47: RNCC: 5 | RNVC: 2
3854AS300-47: RNCC: 5 | RNVC: 2
3854AS300-47: RNCC: 5 | RNVC: 2
3854AS300-47: RNCC: 5 | RNVC: 2
3854AS300-47: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-582-2544
Hand File Set

015822544
511387: RNCC: 3 | RNVC: 2

12 Feb 2010

5110-01-386-7070
Tube Cutter

013867070
374-FC: RNCC: 3 | RNVC: 9
89232595: RNCC: 5 | RNVC: 2
89232595: RNCC: 5 | RNVC: 9

11 Feb 1994

5110-01-231-5715
Stripping Tool

012315715
901-A: RNCC: 3 | RNVC: 2
WS-1: RNCC: 5 | RNVC: 2
WS-1: RNCC: 5 | RNVC: 2

30 Apr 1986

5110-00-025-2283
Hand Reamer

000252283
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
764-1460-000: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
146RL: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-382-3443
Hand File

013823443
952834: RNCC: 3 | RNVC: 2

1 Nov 1993

5110-01-075-0761
Wire Stripper Blade Set

010750761
L-5559: RNCC: 3 | RNVC: 2
VG95236T16BA007: RNCC: 5 | RNVC: 2
L5559: RNCC: 5 | RNVC: 9

13 Apr 1979

5110-01-322-5550
Deburring Footpiece

013225550
ZT339016: RNCC: 3 | RNVC: 2

9 Jul 1990

5110-01-322-5547
Deburring Footpiece

013225547
ZT339010: RNCC: 3 | RNVC: 2

9 Jul 1990

5110-01-322-5552
Spotfacing Footpiece

013225552
ZT339033: RNCC: 3 | RNVC: 2

9 Jul 1990

5110-01-060-1701
Tube Cutter Cutting Wheel

010601701
33190: RNCC: 3 | RNVC: 2
00464109: RNCC: 5 | RNVC: 2
33190: RNCC: 5 | RNVC: 2
00.02.44.50: RNCC: 5 | RNVC: 2
E-4546: RNCC: 5 | RNVC: 2
00.02.44.50: RNCC: 5 | RNVC: 9

15 May 1978

5110-01-364-0993
Hand Wire Stripper

013640993
TH25-980: RNCC: 3 | RNVC: 9

11 Sep 1992

5110-01-053-0572
Hand File

010530572
A-A-2447: RNCC: 4 | RNVC: 1
37116: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
37116: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL6: RNCC: 5 | RNVC: 9

24 Dec 1977

5110-01-120-2583
Hand Reamer

011202583
PWA55402: RNCC: 3 | RNVC: 2

13 Oct 1981

5110-01-047-0797
Reamer

010470797
1252-25: RNCC: 3 | RNVC: 2
1252-25: RNCC: 3 | RNVC: 9
1252-25: RNCC: 5 | RNVC: 9

1 Sep 1977

5110-01-358-4273
File Holder

013584273
5605-750-4330: RNCC: 3 | RNVC: 2
5605-750-4330: RNCC: 5 | RNVC: 9

14 May 1992

5110-01-428-5243
Knife Blade

014285243
11-911A: RNCC: 3 | RNVC: 2
5R704: RNCC: 5 | RNVC: 2
11-911A: RNCC: 5 | RNVC: 2
1-11-908: RNCC: 5 | RNVC: 2

27 Mar 1996

5110-01-138-7564
Valve Guide Reamer

011387564
2479561-1: RNCC: 3 | RNVC: 2
72-01340-156: RNCC: 5 | RNVC: 9
2479561-1: RNCC: 5 | RNVC: 9
72-01340-156: RNCC: 5 | RNVC: 9

20 Sep 1982

5110-01-510-1972
Hand Optical Fiber Cleaving Tool

015101972
FBC-006: RNCC: 3 | RNVC: 9
FBC-006: RNCC: 5 | RNVC: 2

15 Jul 2003

5110-00-807-8821
Single Bow Cutting Punch

008078821
GGG-P-833: RNCC: 4 | RNVC: 1
GGG-P-833 TY1CLBST2SZ18: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-01-434-9650
File Handle

014349650
21494: RNCC: 3 | RNVC: 2
21494: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9640
File Handle

014349640
21503: RNCC: 3 | RNVC: 2
21503: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9326
Hand File

014349326
05158: RNCC: 3 | RNVC: 1
05158: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-435-3900
Spring Action Snips

014353900
12-99367097J: RNCC: 3 | RNVC: 2
9931 7097: RNCC: 5 | RNVC: 9

22 Aug 1996

5110-01-434-9555
Hand File

014349555
03980N: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-00-708-3699
Hand Reamer

007083699
7083699: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-499-4673
Combination Tool

014994673
5-603-154: RNCC: 3 | RNVC: 2
10339921: RNCC: 6 | RNVC: 9

24 Jul 2002

5110-00-708-2197
Hand Reamer

007082197
7082197: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-473-9446
Electricians' Scissors

014739446
100C: RNCC: 3 | RNVC: 2
2100-7: RNCC: 3 | RNVC: 2
100A: RNCC: 5 | RNVC: 9
GGG-S-278 TY2CL6: RNCC: 5 | RNVC: 9
GGG-S-278: RNCC: 5 | RNVC: 9

19 Apr 2000

5110-01-371-4028
Tube Cutter

013714028
R29549-1-29: RNCC: 3 | RNVC: 2

12 Feb 1993

5110-01-368-4051
Hand Cold Chisel

013684051
B107.410: RNCC: 3 | RNVC: 1
C-10: RNCC: 3 | RNVC: 2
B107.410 CAT48 TY1CL2: RNCC: 5 | RNVC: 1

1 Dec 1992

5110-01-368-5846
Sheet Metal Scraper

013685846
AT513: RNCC: 3 | RNVC: 9
AT513: RNCC: C | RNVC: 1

4 Dec 1992

5110-01-485-4227
Seal Template Cutter

014854227
PWA72071: RNCC: 3 | RNVC: 2

24 May 2001

5110-01-337-3022
Fiber Opti Scissors

013373022
301: RNCC: 3 | RNVC: 2
301: RNCC: 5 | RNVC: 2

12 Apr 1991

5110-01-477-3717
Cylinder Ridge Reamer

014773717
5737869: RNCC: 3 | RNVC: 2
05737869: RNCC: 5 | RNVC: 9

7 Aug 2000

5110-00-768-3800
Hand Wire Stripper

007683800
45-187: RNCC: 3 | RNVC: 2

1 Jan 1960

5110-01-336-5668
Hand File

013365668
73-27600: RNCC: 3 | RNVC: 2
73-27600 SIMONDS: RNCC: 5 | RNVC: 2

27 Mar 1991

5110-01-335-1595
Hand File

013351595
14V7: RNCC: 3 | RNVC: 2

6 Mar 1991

5110-01-335-1428
Hand Cape Chisel

013351428
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL1: RNCC: 5 | RNVC: 1
PPC14B: RNCC: 5 | RNVC: 2
PPC14A: RNCC: 5 | RNVC: 9
B107.48: RNCC: 5 | RNVC: 9
B107.48 TY1CL1: RNCC: 5 | RNVC: 9

6 Mar 1991

5110-01-330-3915
Single Bit Ax

013303915
E14A: RNCC: 3 | RNVC: 2
GQD31471: RNCC: 5 | RNVC: 2
D31471-001-8: RNCC: 5 | RNVC: 2

4 Dec 1990

5110-15-221-5258
Bedani In Coppia

152215258
BEDANIMM5P90: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-01-288-3434
Dimpling Punch

012883434
ZT3867-10: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-01-288-3460
Knockout Punch And Die

012883460
ZT2947-10: RNCC: 3 | RNVC: 2

5 Nov 1988

5110-00-784-7950
Tube Deburring Tool Stem

007847950
D9849-13-24: RNCC: 3 | RNVC: 2

14 Apr 1972

5110-01-499-3878
Two Man Crosscut Saw

014993878
PS-102: RNCC: 3 | RNVC: 2

22 Jul 2002

5110-99-701-9211
Chisel And Gouge Handle

997019211
397.70: RNCC: 3 | RNVC: 2
397.70: RNCC: 5 | RNVC: 2

16 Mar 1995

5110-25-125-3033
Craftsman's Knife

5110-99-977-3114
Diagonal Cutting Pliers

999773114
3601: RNCC: 3 | RNVC: 2
3601S: RNCC: 5 | RNVC: 2
676EW: RNCC: 5 | RNVC: 2
1H1108: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-25-122-6909
Craftsman's Knife

5110-22-614-6702
Razor Blade Glass Scraper

226146702
37120: RNCC: 3 | RNVC: 2

10 Jan 2007

5110-01-307-4767
Stripper Blade Set

013074767
L-554: RNCC: 3 | RNVC: 2

12 Sep 1989

5110-01-301-2751
Cutting Punchpliers

013012751
DIE3/16IN: RNCC: 3 | RNVC: 2

26 May 1989

5110-01-429-7353
Thread Restorer File

014297353
GA313: RNCC: 3 | RNVC: 2
12960727: RNCC: 3 | RNVC: 2

17 Apr 1996

5110-01-660-1738
Hand Hacksaw Blade

016601738
B94.52M: RNCC: 3 | RNVC: 1
HHB1224T10: RNCC: 5 | RNVC: 2

9 Jan 2017

5110-01-660-3157
Hand Reamer

016603157
513-000-038: RNCC: 3 | RNVC: 2

17 Jan 2017

5110-01-658-4120
Craftsman's Knife

016584120
44131: RNCC: 3 | RNVC: 2

26 Sep 2016

5110-01-650-6457
Hand Optical Fiber Stripper

016506457
80355-9: RNCC: 3 | RNVC: 2
1N180120089: RNCC: 5 | RNVC: 2
FO103-S-525: RNCC: 5 | RNVC: 2

14 Dec 2015

5110-01-271-8960
Exposed Blade Tube Deburring Tool

012718960
D10210-02: RNCC: 3 | RNVC: 2

2 Feb 1988

5110-01-610-3473
Hand Cable Stripper

016103473
FT801-02: RNCC: 3 | RNVC: 2

15 Aug 2012

5110-01-667-8321
Cylinder Ridge Reamer

016678321
PE15840: RNCC: 3 | RNVC: 2

1 Nov 2017

5110-01-695-0662
Crosscut Hand Saw

016950662
710-99: RNCC: 3 | RNVC: 9

12 May 2021

5110-01-335-0606
Hand Cold Chisel

013350606
B107.410: RNCC: 3 | RNVC: 1
B107.48 TY1CL2: RNCC: 5 | RNVC: 1
B107.48: RNCC: 5 | RNVC: 1
33-103: RNCC: 5 | RNVC: 2
33-103: RNCC: 5 | RNVC: 9

5 Mar 1991

5110-01-492-8373
Hand Reamer

014928373
C15138-190B: RNCC: 3 | RNVC: 2
C15138-1910B: RNCC: 5 | RNVC: 9

13 Dec 2001

5110-01-654-0429
Hand Wire Stripper

016540429
45-2544: RNCC: 3 | RNVC: 2

15 Apr 2016

5110-01-473-9805
Hand File

014739805
73-188000: RNCC: 3 | RNVC: 2

20 Apr 2000

5110-01-653-6454
Hand File Set

016536454
72758820: RNCC: 3 | RNVC: 2

31 Mar 2016

5110-01-106-4110
Trepan Cutter

011064110
PWA55367: RNCC: 3 | RNVC: 2

17 Jan 1981

5110-13-108-6882
Metal Stamp Die Set

5110-01-592-5694
Fastener Retainer Trimming Tool

015925694
FTTT-3-0-3: RNCC: 3 | RNVC: 2

10 Mar 2011

5110-01-593-1826
Hand Metal Cutting Shears

015931826
HCS2036-06-011C: RNCC: 3 | RNVC: 2

4 Apr 2011

5110-01-675-6216
Bolt Cutter

016756216
63RBCHD: RNCC: 3 | RNVC: 2

19 Sep 2018

5110-01-693-6213
Scraper Blade

016936213
JNT-SRS: RNCC: 3 | RNVC: 2

24 Feb 2021

5110-01-696-7997
Pipe Cutter

016967997
466S: RNCC: 3 | RNVC: 2

18 Aug 2021

5110-01-565-8697
Pliers

015658697
EP144A: RNCC: 3 | RNVC: 2

11 Aug 2008

5110-01-480-0636
Thread Restorer File

014800636
TF1124: RNCC: 3 | RNVC: 1

6 Nov 2000

5110-01-693-9382
Ladies' Scissors

016939382
CS-SBK-S9: RNCC: 3 | RNVC: 2

11 Mar 2021

5110-01-696-3267
Pocket Knife

016963267
48-22-1502: RNCC: 3 | RNVC: 2

21 Jul 2021

5110-01-382-7801
Circle Cutter

013827801
002303: RNCC: 3 | RNVC: 2

9 Nov 1993

5110-01-680-7129
Scraping Knife

016807129
PKNC150: RNCC: 3 | RNVC: 2

17 May 2019

5110-01-681-7139
Hand Reamer

016817139
080-586-750WB: RNCC: 3 | RNVC: 2

1 Jul 2019

5110-01-682-1260
Metal Cutter Blade

016821260
22-000123: RNCC: 3 | RNVC: 2
01.07.0052: RNCC: 5 | RNVC: 2

23 Jul 2019

5110-01-661-6754
Hand Wire Stripper

016616754
45-092: RNCC: 3 | RNVC: 2
11A7000262: RNCC: 7 | RNVC: 2

13 Mar 2017

5110-01-473-9806
Hand File

014739806
73-53050: RNCC: 3 | RNVC: 2
SIM 73-53050: RNCC: 5 | RNVC: 2
73-53050 SIMONDS: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-474-5097
Wood Chisel Set

014745097
B107.410: RNCC: 3 | RNVC: 1
KIT WCS6: RNCC: 3 | RNVC: 2
B107.410 CAT 44: RNCC: 5 | RNVC: 1
B107.410 CAT 44 TY2: RNCC: 5 | RNVC: 1

4 May 2000

5110-01-474-0013
Pocket Folding Multi-Tool

014740013
07520: RNCC: 3 | RNVC: 2
MULTI-PLIER 600 BLACK: RNCC: 5 | RNVC: 1

20 Apr 2000

5110-01-474-5112
Wood Boring Spade Bit Set

014745112
KIT FBB-13: RNCC: 3 | RNVC: 2

4 May 2000

5110-01-367-9519
Pneumatic Wire Stripper

013679519
WSP-1630: RNCC: 3 | RNVC: 2

21 Nov 1992

5110-01-336-5677
Hand File

013365677
73-14600: RNCC: 3 | RNVC: 2
73-14600 SIMONDS: RNCC: 5 | RNVC: 2

27 Mar 1991

5110-01-378-6839
Craftsman's Knife Set

013786839
618ST014: RNCC: 3 | RNVC: 2

21 Aug 1993

5110-01-629-3211
Pipe Cutter

016293211
32845: RNCC: 3 | RNVC: 2

25 Jun 2014

5110-01-628-8586
Pocket Folding Multi-Tool

016288586
SUPER TOOL 300 EOD: RNCC: 3 | RNVC: 2
300 EOD: RNCC: 5 | RNVC: 2

11 Jun 2014

5110-01-503-0218
End Cutting Nippers

015030218
PL-167: RNCC: 3 | RNVC: 2

29 Nov 2002

5110-01-664-1869
Tube End Cone Tool

016641869
2-HF6: RNCC: 3 | RNVC: 2

9 Jun 2017

5110-01-691-0041
Pocket Folding Multi-Tool

016910041
1628830: RNCC: 3 | RNVC: 2

16 Sep 2020

5110-01-665-4657
Ratchet Drill

016654657
109XPA: RNCC: 3 | RNVC: 2

1 Aug 2017

5110-01-308-6268
Knife Safety Cap

013086268
X61120: RNCC: 3 | RNVC: 9
6112: RNCC: 5 | RNVC: 9

2 Oct 1989

5110-01-335-1596
Hand File

013351596
14V: RNCC: 3 | RNVC: 2

6 Mar 1991

5110-01-335-1594
Hand File

013351594
12CT: RNCC: 3 | RNVC: 2

6 Mar 1991

5110-01-117-1714
Bearing Hold Cutter

011171714
8041741: RNCC: 3 | RNVC: 2
8041741: RNCC: 5 | RNVC: 9

9 Aug 1981

5110-01-466-9303
Diagonal Cutting Pliers

014669303
S141-5JS: RNCC: 3 | RNVC: 2
294PL206: RNCC: 5 | RNVC: 2
S141-5JS: RNCC: 5 | RNVC: 9

6 Aug 1999

5110-01-467-8808
Hand File

014678808
13841: RNCC: 3 | RNVC: 2
32.434: RNCC: 3 | RNVC: 2
13841: RNCC: 5 | RNVC: 9

17 Sep 1999

5110-01-430-6245
Hand Cold Chisel

014306245
113: RNCC: 3 | RNVC: 1
113: RNCC: 5 | RNVC: 9

2 May 1996

5110-01-432-6195
Cylinder Ridge Reamer

014326195
3823407: RNCC: 3 | RNVC: 2

10 Jun 1996

Load More Results