What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 42 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 42of 112

5110-01-598-2254
Pocket Folding Multi-Tool

015982254
30-000397: RNCC: 3 | RNVC: 2

12 Jul 2011

5110-01-598-2253
Pocket Folding Multi-Tool

015982253
30-000399: RNCC: 3 | RNVC: 2
30-000361: RNCC: 5 | RNVC: 9

12 Jul 2011

5110-01-598-2248
Pocket Folding Multi-Tool

015982248
30-000398: RNCC: 3 | RNVC: 2

12 Jul 2011

5110-01-597-1103
Hand Metal Cutting Shears

015971103
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 16 TY2CL1STB: RNCC: 5 | RNVC: 1
9-42714: RNCC: 5 | RNVC: 2
B107.16 TY2CL1STB: RNCC: 5 | RNVC: 9
B107.16: RNCC: 5 | RNVC: 9

26 May 2011

5110-01-594-3747
Pocket Folding Multi-Tool

015943747
MUT EOD: RNCC: 3 | RNVC: 2
LT850032: RNCC: 5 | RNVC: 2

25 Apr 2011

5110-01-694-3749
Hand File

016943749
017-000043-000: RNCC: 3 | RNVC: 2

30 Mar 2021

5110-01-592-2581
Pocket Folding Multi-Tool

015922581
30-000453: RNCC: 3 | RNVC: 2

1 Mar 2011

5110-01-687-8803
Sealant Removal Scraper

016878803
310/03: RNCC: 3 | RNVC: 2

22 Apr 2020

5110-01-687-8804
Sealant Removal Scraper

016878804
310/14: RNCC: 3 | RNVC: 2

22 Apr 2020

5110-01-686-3876
Flexible Armored Cable Cutter And Crimper

016863876
M22520/5-61: RNCC: 3 | RNVC: 2
M22520/5-61: RNCC: 5 | RNVC: 2

12 Feb 2020

5110-01-684-1257
Hand File Set

016841257
SGFMA104: RNCC: 3 | RNVC: 2
SGFMA104: RNCC: 5 | RNVC: 2

22 Oct 2019

5110-01-684-1237
Pliers

016841237
BAH2628S-180: RNCC: 3 | RNVC: 2
06156166: RNCC: 5 | RNVC: 9

22 Oct 2019

5110-01-589-3876
Reamer (1.025 Dia)

015893876
820-7348601PC33-1025: RNCC: 3 | RNVC: 1

25 Oct 2010

5110-01-676-7943
Hand Operated Cable Cutter

016767943
ROCKSMITH PRECISION 300: RNCC: 3 | RNVC: 2
ROCKSMITH PRECISION 300: RNCC: 5 | RNVC: 2

13 Nov 2018

5110-01-585-7939
Pocket Folding Multi-Tool

015857939
850322: RNCC: 3 | RNVC: 2

7 Jun 2010

5110-01-585-7938
Pocket Folding Multi-Tool

015857938
850232: RNCC: 3 | RNVC: 2

7 Jun 2010

5110-01-671-7026
Tube Cutter

016717026
DC-5: RNCC: 3 | RNVC: 2

6 Apr 2018

5110-01-671-1542
Pliers

016711542
E74486-001: RNCC: 3 | RNVC: 2

16 Mar 2018

5110-01-583-9252
Pocket Knife

015839252
C91PBBK2: RNCC: 3 | RNVC: 2
C91BBK2: RNCC: 5 | RNVC: 9
C91PBBK: RNCC: 5 | RNVC: 9

12 Apr 2010

5110-01-665-1805
Hand Optical Fiber Stripper

016651805
PA1171: RNCC: 3 | RNVC: 2

21 Jul 2017

5110-01-664-3149
Pliers

016643149
ATI2979U: RNCC: 3 | RNVC: 2
ATI2979U: RNCC: 5 | RNVC: 2
ATI2979U: RNCC: 5 | RNVC: 2
ATI2979U: RNCC: 5 | RNVC: 2

14 Jun 2017

5110-01-655-8001
Hand Cold Chisel

016558001
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1
12405: RNCC: 5 | RNVC: 9
B107.48: RNCC: 5 | RNVC: 9
B107.48 TY1CL2: RNCC: 5 | RNVC: 9

7 Jun 2016

5110-01-654-0368
Hand File

016540368
SGF10HR: RNCC: 3 | RNVC: 2

15 Apr 2016

5110-01-654-0370
Hand File

016540370
SGF10MA: RNCC: 3 | RNVC: 2

15 Apr 2016

5110-01-653-6420
Pliers

016536420
017-000298-000: RNCC: 3 | RNVC: 2
017-000298-000: RNCC: 5 | RNVC: 2

31 Mar 2016

5110-01-575-9189
Drill Reamer

015759189
3854AS400-11: RNCC: 3 | RNVC: 2
3854AS400-11: RNCC: 5 | RNVC: 2
3854AS400-11: RNCC: 5 | RNVC: 2
3854AS400-11: RNCC: 5 | RNVC: 2
3854AS400-11: RNCC: 5 | RNVC: 2
3854AS400-11: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9188
Piloted Reamer

015759188
3854AS300-16: RNCC: 3 | RNVC: 2
3854AS300-16: RNCC: 5 | RNVC: 2
3854AS300-16: RNCC: 5 | RNVC: 2
3854AS300-16: RNCC: 5 | RNVC: 2
3854AS300-16: RNCC: 5 | RNVC: 2
3854AS300-16: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9182
Piloted Reamer

015759182
3854AS300-11: RNCC: 3 | RNVC: 2
3854AS300-11: RNCC: 5 | RNVC: 2
3854AS300-11: RNCC: 5 | RNVC: 2
3854AS300-11: RNCC: 5 | RNVC: 2
3854AS300-11: RNCC: 5 | RNVC: 2
3854AS300-11: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9184
Piloted Reamer

015759184
3854AS300-12: RNCC: 3 | RNVC: 2
3854AS300-12: RNCC: 5 | RNVC: 2
3854AS300-12: RNCC: 5 | RNVC: 2
3854AS300-12: RNCC: 5 | RNVC: 2
3854AS300-12: RNCC: 5 | RNVC: 2
3854AS300-12: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9187
Piloted Reamer

015759187
3854AS300-17: RNCC: 3 | RNVC: 2
3854AS300-17: RNCC: 5 | RNVC: 2
3854AS300-17: RNCC: 5 | RNVC: 2
3854AS300-17: RNCC: 5 | RNVC: 2
3854AS300-17: RNCC: 5 | RNVC: 2
3854AS300-17: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9179
Piloted Reamer

015759179
3854AS300-14: RNCC: 3 | RNVC: 2
3854AS300-14: RNCC: 5 | RNVC: 2
3854AS300-14: RNCC: 5 | RNVC: 2
3854AS300-14: RNCC: 5 | RNVC: 2
3854AS300-14: RNCC: 5 | RNVC: 2
3854AS300-14: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-575-9178
Drill Reamer

015759178
3854AS500-3: RNCC: 3 | RNVC: 2
3854AS500-3: RNCC: 5 | RNVC: 2
3854AS500-3: RNCC: 5 | RNVC: 2
3854AS500-3: RNCC: 5 | RNVC: 2
3854AS500-3: RNCC: 5 | RNVC: 2
3854AS500-3: RNCC: 5 | RNVC: 2

16 Jul 2009

5110-01-649-9804
Rivet Cutter

016499804
SRS6P21-5: RNCC: 3 | RNVC: 2

17 Nov 2015

5110-01-647-5425
Hand Reamer

016475425
44-350: RNCC: 3 | RNVC: 2

24 Aug 2015

5110-01-647-5424
Hand Reamer

016475424
44-320: RNCC: 3 | RNVC: 2

24 Aug 2015

5110-01-647-5426
Hand Reamer

016475426
44-400: RNCC: 3 | RNVC: 2

24 Aug 2015

5110-01-572-9866
Hand Operated Wire Rope Cutter

015729866
4AQ1074-2: RNCC: 3 | RNVC: 2

2 Apr 2009

5110-01-632-2705
Hand File

016322705
SGF12MA: RNCC: 3 | RNVC: 2

14 Oct 2014

5110-01-631-3519
Scraper Blade

016313519
NYZ701810: RNCC: 3 | RNVC: 2

10 Sep 2014

5110-01-618-1862
Hand File Set

016181862
SGFMN106: RNCC: 3 | RNVC: 2

16 Apr 2013

5110-01-614-6467
Pocket Folding Multi-Tool

016146467
MUT: RNCC: 3 | RNVC: 2

11 Dec 2012

5110-01-561-1252
Hand Metal Cutting Shears

015611252
B107.16TY1CL1STB(SIZE 12.5IN): RNCC: 3 | RNVC: 1

26 Feb 2008

5110-01-559-7340
Hand File Set

015597340
22030HN: RNCC: 3 | RNVC: 2
22030HNNN: RNCC: 5 | RNVC: 2
NIC 22030H: RNCC: 5 | RNVC: 9
22030HN: RNCC: 5 | RNVC: 9

3 Jan 2008

5110-01-608-4025
Craftsman's Knife

016084025
XN100: RNCC: 3 | RNVC: 2
440942: RNCC: 5 | RNVC: 2
X-ACTO: RNCC: 5 | RNVC: 2

26 Jun 2012

5110-01-558-3920
Hand Reamer

015583920
TD525C1-15: RNCC: 3 | RNVC: 2

8 Nov 2007

5110-01-558-3917
Hand Reamer

015583917
TD525C1-12: RNCC: 3 | RNVC: 2

8 Nov 2007

5110-01-558-3919
Hand Reamer

015583919
TD525C1-14: RNCC: 3 | RNVC: 2
TD525C1-14: RNCC: 5 | RNVC: 2

8 Nov 2007

5110-01-558-3921
Hand Reamer

015583921
TD525C1-16: RNCC: 3 | RNVC: 2

8 Nov 2007

5110-01-558-3918
Hand Reamer

015583918
TD525C1-13: RNCC: 3 | RNVC: 2

8 Nov 2007

5110-01-604-4822
Gasket Cutting Punch

016044822
PGH8A: RNCC: 3 | RNVC: 2
FRS PGH8A: RNCC: 5 | RNVC: 9

6 Apr 2012

5110-01-603-8453
Scraping Knife Set

016038453
PKN500: RNCC: 3 | RNVC: 2

19 Mar 2012

5110-01-600-8495
Utility Cutter Blade

016008495
YA444B-1: RNCC: 3 | RNVC: 2

21 Dec 2011

5110-01-600-0022
Hand Operated Cable Cutter

016000022
57523-00: RNCC: 3 | RNVC: 2
57523-00: RNCC: 5 | RNVC: 2

2 Nov 2011

5110-01-595-6997
Pocket Folding Multi-Tool

015956997
S62N-CP: RNCC: 3 | RNVC: 9
S63: RNCC: 5 | RNVC: 9

4 May 2011

5110-01-595-2885
Spec Countersunk

015952885
12-03011: RNCC: 3 | RNVC: 9

25 Apr 2011

5110-01-595-1530
Hand File

015951530
017-000213R00: RNCC: 3 | RNVC: 2

25 Apr 2011

5110-01-595-1529
Hand File

015951529
017-000212R00: RNCC: 3 | RNVC: 2

25 Apr 2011

5110-01-595-1123
Hand Metal Cutting Shears

015951123
017-000200R00: RNCC: 3 | RNVC: 2
017-000200R00: RNCC: 5 | RNVC: 2

25 Apr 2011

5110-01-595-0972
Exposed Blade Tube Deburring Tool

015950972
017-000211R00: RNCC: 3 | RNVC: 2

25 Apr 2011

5110-01-595-0365
Craftsman's Knife

015950365
017-000235R00: RNCC: 3 | RNVC: 2

25 Apr 2011

5110-01-595-0341
Hand Wire Stripper

015950341
MIL 16878: RNCC: 3 | RNVC: 2
MIL 16878: RNCC: 5 | RNVC: 2

25 Apr 2011

5110-01-594-9849
Metal Cutting Hand Saw

015949849
017-000216R00: RNCC: 3 | RNVC: 2

25 Apr 2011

5110-01-594-8625
Hand File Set

015948625
017-000201R00: RNCC: 3 | RNVC: 2

25 Apr 2011

5110-01-594-3587
Knife Blade Handle

015943587
017-000245R00: RNCC: 3 | RNVC: 2

25 Apr 2011

5110-01-594-1322
Razor Saw And Spec

015941322
017-000239R00: RNCC: 3 | RNVC: 2

22 Apr 2011

5110-01-593-9824
Spec Me Wheel Stand

015939824
TS-8: RNCC: 3 | RNVC: 2

22 Apr 2011

5110-01-552-0261
Wire Stripper Blade

015520261
S30367A: RNCC: 3 | RNVC: 9

4 Jun 2007

5110-01-588-7777
Hand Reamer

015887777
16A13220L1-27: RNCC: 3 | RNVC: 2

7 Dec 2020

5110-01-588-7760
Hand Metal Cutting Shears Set

015887760
DAS30: RNCC: 3 | RNVC: 2

4 Oct 2010

5110-01-588-1240
Tube Cutter

015881240
6011388: RNCC: 3 | RNVC: 2

2 Sep 2010

5110-01-583-1804
Diagonal Cutting Pliers

015831804
E711BCG: RNCC: 3 | RNVC: 2

18 Mar 2010

5110-01-549-0652
Diagonal Cutting Pliers

015490652
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 11 TY1CL1: RNCC: 5 | RNVC: 1
CRE 5427CVN: RNCC: 5 | RNVC: 2
5008: RNCC: 5 | RNVC: 2
5427CVN: RNCC: 5 | RNVC: 2
B107.11: RNCC: 5 | RNVC: 9
5427C: RNCC: 5 | RNVC: 9
5427C: RNCC: 5 | RNVC: 9
B107.11 TY1CL1: RNCC: 5 | RNVC: 9

9 Mar 2007

5110-01-581-2277
Hand Optical Fiber Stripper

015812277
F11301T: RNCC: 3 | RNVC: 2
F1375: RNCC: 5 | RNVC: 9
JIC-375: RNCC: 5 | RNVC: 9

10 Jan 2010

5110-01-548-3765
Miter Box

015483765
RC204X-1433005-004: RNCC: 3 | RNVC: 1

21 Feb 2007

5110-01-580-3279
Tube Deburring Tool

015803279
DEBUR300: RNCC: 3 | RNVC: 2
DEBUR300: RNCC: 5 | RNVC: 2

11 Dec 2009

5110-01-575-1770
Craftsman's Knife

015751770
UTK150: RNCC: 3 | RNVC: 2
SB112-1: RNCC: 5 | RNVC: 1
PK150: RNCC: 5 | RNVC: 9
SB112-1: RNCC: 5 | RNVC: 9

23 Jun 2009

5110-01-546-1026
Tube Cutter

015461026
049584: RNCC: 3 | RNVC: 1
49584: RNCC: 5 | RNVC: 1
49584: RNCC: 5 | RNVC: 1

6 Dec 2006

5110-01-545-5273
Edge Cutting Trimming Tool

015455273
00937301000: RNCC: 3 | RNVC: 2
37301: RNCC: 5 | RNVC: 2
9-37301: RNCC: 5 | RNVC: 9

16 Nov 2006

5110-01-542-7581
Hand Optical Fiber Cleaving Tool

015427581
GHC100-BFRT: RNCC: 3 | RNVC: 2

17 Aug 2006

5110-01-566-6638
Pocket Folding Multi-Tool

015666638
B69: RNCC: 3 | RNVC: 9

5 Sep 2008

5110-01-540-9530
Pocket Folding Multi-Tool

015409530
5110-01-540-9530: RNCC: 3 | RNVC: 1
CORE/SS/LEATHER: RNCC: 5 | RNVC: 9
830144: RNCC: 5 | RNVC: 9

8 Jun 2006

5110-01-540-0186
Pocket Folding Multi-Tool

015400186
22-01545: RNCC: 3 | RNVC: 2
DIESEL (BLACK): RNCC: 5 | RNVC: 2

5 May 2006

5110-01-540-0152
Pocket Folding Multi-Tool

015400152
22-01470: RNCC: 3 | RNVC: 2
DIESEL: RNCC: 5 | RNVC: 1

5 May 2006

5110-01-538-1509
Flexible Armored Cable Cutter And Crimper

015381509
1000054C: RNCC: 3 | RNVC: 2
92-0612-00: RNCC: 5 | RNVC: 9

13 Mar 2006

5110-01-535-0856
Craftsman's Knife

015350856
GGG-K-481: RNCC: 4 | RNVC: 1

15 Nov 2005

5110-01-534-8102
Ai Install Tool Set

015348102
3867AS220-1: RNCC: 3 | RNVC: 2
3867AS220-1 (PWO TO LKE): RNCC: 5 | RNVC: 9
10366491: RNCC: 6 | RNVC: 9

3 Nov 2005

5110-01-547-0729
Tube Cutter

015470729
32935: RNCC: 3 | RNVC: 2
20: RNCC: 5 | RNVC: 2

11 Jan 2007

5110-01-543-4632
Pocket Knife

015434632
C14BK 04: RNCC: 3 | RNVC: 2
YSC14SBK3: RNCC: 5 | RNVC: 2
RESCUE 93 MM BLACK FRN: RNCC: 5 | RNVC: 2
YSC14SBK3: RNCC: 5 | RNVC: 2
YSC14SBK: RNCC: 5 | RNVC: 9

13 Sep 2006

5110-01-540-5820
Knife Blade

015405820
1-11-301: RNCC: 3 | RNVC: 2

24 May 2006

5110-01-538-3943
Craftsman's Knife

015383943
X-ACTO SURGRIP UTILITY KNIFE: RNCC: 3 | RNVC: 2
06-0149: RNCC: 5 | RNVC: 1
5110NCM060105: RNCC: 5 | RNVC: 1
X3274: RNCC: 5 | RNVC: 9
X-ACTO SURGRIP UTILITY KNIFE: RNCC: 5 | RNVC: 9

21 Mar 2006

5110-01-533-9504
Utility Knife

015339504
55427: RNCC: 3 | RNVC: 2
55427: RNCC: 3 | RNVC: 2
SMU-00000092: RNCC: 5 | RNVC: 2

30 Sep 2005

5110-01-531-4077
Hand Reamer

015314077
16A13220L1-17: RNCC: 3 | RNVC: 2

7 Jul 2005

5110-01-530-5342
Pocket Knife

015305342
TF-3: RNCC: 3 | RNVC: 9
TRIDENT TIGERSTRIPE: RNCC: 5 | RNVC: 9

1 Jun 2005

5110-01-529-1631
Pocket Folding Multi-Tool

015291631
07564: RNCC: 3 | RNVC: 2
PRO SCOUT: RNCC: 5 | RNVC: 1
07564: RNCC: 5 | RNVC: 2
341-7265: RNCC: 5 | RNVC: 2

6 Apr 2005

5110-01-527-9660
Craftsman's Knife Set

015279660
XNS100: RNCC: 3 | RNVC: 2
422600000/416: RNCC: 5 | RNVC: 2
XNS100: RNCC: 5 | RNVC: 9

25 Feb 2005

5110-01-526-8768
Pipe Cutter

015268768
5001: RNCC: 3 | RNVC: 1

11 Jan 2005

5110-01-526-3548
Pipe Cutter Cutting Wheel

015263548
23165: RNCC: 3 | RNVC: 1

15 Dec 2004

5110-01-526-3543
Pipe Cutter Cutting Wheel

015263543
23181: RNCC: 3 | RNVC: 1

15 Dec 2004

5110-01-525-6659
Pocket Folding Multi-Tool

015256659
830662: RNCC: 3 | RNVC: 2
CHARGE AL/LEATHER: RNCC: 5 | RNVC: 1
CHARGE TI: RNCC: 5 | RNVC: 9
830002: RNCC: 5 | RNVC: 9

18 Nov 2004

5110-01-525-6666
Pocket Folding Multi-Tool

015256666
831551: RNCC: 3 | RNVC: 2
REBAR: RNCC: 5 | RNVC: 2
BLAST/SS/LEATHER: RNCC: 5 | RNVC: 9
830030: RNCC: 5 | RNVC: 9

18 Nov 2004

5110-01-525-6660
Pocket Folding Multi-Tool

015256660
830024: RNCC: 3 | RNVC: 2
FUSE/SS/NYLON: RNCC: 5 | RNVC: 2

18 Nov 2004

5110-01-525-6655
Pocket Folding Multi-Tool

015256655
830674: RNCC: 3 | RNVC: 2
CHARGE ALX/LEATHER: RNCC: 5 | RNVC: 1
CHARGE XTI: RNCC: 5 | RNVC: 9
830009: RNCC: 5 | RNVC: 9

18 Nov 2004

5110-01-524-5586
Sheet Metal Ripping Cutter

015245586
TFIM 25.0120196: RNCC: 3 | RNVC: 2
TFIM 25.0120196: RNCC: 5 | RNVC: 2

7 Oct 2004

5110-01-522-2021
Air Tool Set Assy 4

015222021
344OAS4000-1: RNCC: 3 | RNVC: 2

22 Jul 2004

5110-01-521-7065
Flexible Carbon Scraper

015217065
SK-17285-2: RNCC: 3 | RNVC: 1

30 Jun 2004

5110-01-520-8380
Hand Wire Stripper

015208380
45-2542: RNCC: 3 | RNVC: 2
45-2542: RNCC: 5 | RNVC: 2

27 May 2004

5110-01-519-6408
Arch Punch

015196408
3427A13: RNCC: 3 | RNVC: 2

27 Apr 2004

5110-01-516-4271
Air Pitch Link Tool

015164271
18D8658-1: RNCC: 3 | RNVC: 2

7 Jan 2004

5110-01-516-3243
Pocket Knife

015163243
30-000193: RNCC: 3 | RNVC: 2
GERBER EMERSON ALLIANCE: RNCC: 5 | RNVC: 1
22-07157: RNCC: 5 | RNVC: 9

31 Dec 2003

5110-01-516-3244
Pocket Knife

015163244
22-07158: RNCC: 3 | RNVC: 2
GERBER EMERSON ALLIANCE: RNCC: 5 | RNVC: 1

31 Dec 2003

5110-01-516-3228
Pocket Knife

015163228
05786: RNCC: 3 | RNVC: 2
APPLEGATE-FAIRBAIRN COVERT: RNCC: 5 | RNVC: 1

31 Dec 2003

5110-01-514-4072
Flexible Carbon Scraper

015144072
SK-17285-1: RNCC: 3 | RNVC: 1
SK-17285REVD: RNCC: D | RNVC: 9

24 Oct 2003

5110-01-493-2210
Hand Optical Fiber Stripper

014932210
22200: RNCC: 3 | RNVC: 2
NN203: RNCC: 3 | RNVC: 2
NO-NIK: RNCC: 5 | RNVC: 1
NO-NIK: RNCC: 5 | RNVC: 9
NN203: RNCC: 5 | RNVC: 9

20 Dec 2001

5110-01-513-4470
Scr Insr Jacking

015134470
820-7348601PC43: RNCC: 3 | RNVC: 1
820-7348601-43: RNCC: 5 | RNVC: 1

25 Sep 2003

5110-01-513-4471
Insert Jacking Nut

015134471
820-7348601PC44: RNCC: 3 | RNVC: 1

25 Sep 2003

5110-01-513-4469
Jcking Guide Insert

015134469
820-7348601PC42: RNCC: 3 | RNVC: 1

25 Sep 2003

5110-01-513-4460
Weld Prep Csk Assy

015134460
820-7348601PC41-ASSY: RNCC: 3 | RNVC: 1

25 Sep 2003

5110-01-513-4448
Hand Reamer

015134448
820-7348601PC33-1250: RNCC: 3 | RNVC: 1

25 Sep 2003

5110-01-513-4410
Hand Reamer

015134410
820-7348601PC33-1037: RNCC: 3 | RNVC: 1

25 Sep 2003

5110-01-513-4418
Hand Reamer

015134418
820-7348601PC33-1240: RNCC: 3 | RNVC: 1

25 Sep 2003

5110-01-513-4416
Hand Reamer

015134416
820-7348601PC33-1190: RNCC: 3 | RNVC: 1

25 Sep 2003

5110-01-513-4415
Hand Reamer

015134415
820-7348601PC33-1140: RNCC: 3 | RNVC: 1

25 Sep 2003

5110-01-513-4412
Hand Reamer

015134412
820-7348601PC33-1090: RNCC: 3 | RNVC: 1

25 Sep 2003

5110-01-513-4402
Reamer Shaft Assy

015134402
820-7348601PC30: RNCC: 3 | RNVC: 1

25 Sep 2003

5110-01-513-4397
Weld Fcg Ctr Assy

015134397
820-7348601PC28: RNCC: 3 | RNVC: 1

25 Sep 2003

5110-01-489-5799
Boiler Tube Cutter

014895799
21805: RNCC: 3 | RNVC: 9

17 Sep 2001

5110-01-489-5798
Boiler Tube Cutter

014895798
21564: RNCC: 3 | RNVC: 9

17 Sep 2001

5110-01-489-5797
Boiler Tube Cutter

014895797
21756: RNCC: 3 | RNVC: 9

17 Sep 2001

5110-01-510-1263
Scraping Knife

015101263
Y2338: RNCC: 3 | RNVC: 1
J2338: RNCC: 5 | RNVC: 1

15 Jul 2003

5110-01-509-6707
Diagonal Cutting Pliers

015096707
SCTD015: RNCC: 3 | RNVC: 1

30 Jun 2003

5110-01-508-2760
Cutter 1In Rev Seat

015082760
845-6766197-KIT B: RNCC: 3 | RNVC: 1
5120-LL-N01-K516: RNCC: 5 | RNVC: 1

16 May 2003

5110-01-508-0596
Plane Cutter Bit

015080596
845-6766197-11B-56: RNCC: 3 | RNVC: 1
LL-NU0-K512: RNCC: 5 | RNVC: 1

12 May 2003

5110-01-508-0605
Plane Cutter Bit

015080605
845-6766197-11B-60: RNCC: 3 | RNVC: 1
5345-LL-NU0-K513: RNCC: 5 | RNVC: 1

12 May 2003

5110-01-507-0764
Hand Reamer

015070764
9U-6101: RNCC: 3 | RNVC: 2

18 Apr 2003

5110-01-506-3239
Air Wrench Assembly

015063239
18D8235-1: RNCC: 3 | RNVC: 2
18D8235-1: RNCC: 3 | RNVC: 2

27 Mar 2003

5110-01-473-9784
Hand Reamer

014739784
34965R: RNCC: 3 | RNVC: 2
127 RIDGID: RNCC: 5 | RNVC: 2
34965 RIDGID: RNCC: 5 | RNVC: 2
RID 34965: RNCC: 5 | RNVC: 2
34965: RNCC: 5 | RNVC: 9

20 Apr 2000

5110-01-473-1814
Hand Cable Stripper

014731814
CS-1: RNCC: 3 | RNVC: 2
AP01224: RNCC: 3 | RNVC: 2
247-0029-030: RNCC: 5 | RNVC: 9

29 Mar 2000

5110-01-502-3254
Scraping Knife

015023254
SS-1: RNCC: 3 | RNVC: 2

31 Oct 2002

5110-01-502-3253
Bolt Cutter Jaws

015023253
0113AC: RNCC: 3 | RNVC: 2
0113AC: RNCC: 5 | RNVC: 9
9-KP0113AC: RNCC: 5 | RNVC: 9

31 Oct 2002

5110-01-501-0069
Hand Hacksaw Blade

015010069
B94.52M: RNCC: 3 | RNVC: 1
HSBM1024B: RNCC: 3 | RNVC: 2
HBM1024: RNCC: 5 | RNVC: 9

19 Sep 2002

5110-01-499-0459
Aircraft Tool Fixture

014990459
SRVOSM15-291: RNCC: 3 | RNVC: 2

11 Jul 2002

5110-01-497-0816
Channel Seal Forming Tool

014970816
T555-28: RNCC: 3 | RNVC: 2

9 May 2002

5110-01-496-8810
Hand Wire Stripper

014968810
ST073A: RNCC: 3 | RNVC: 1

30 Apr 2002

5110-01-491-7860
Rigging Tool Stabil

014917860
70700-84354-041: RNCC: 3 | RNVC: 2

1 Nov 2001

5110-01-488-6190
Double Bit Ax

014886190
B107.400: RNCC: 3 | RNVC: 1
B107.400 CAT 42 TY2CL1: RNCC: 5 | RNVC: 1
35-2MRFG: RNCC: 5 | RNVC: 2
B107.55: RNCC: 5 | RNVC: 9

29 Aug 2001

5110-01-437-2012
Hand Wire Stripper

014372012
PWC16A: RNCC: 3 | RNVC: 2
PWC16: RNCC: 5 | RNVC: 9

7 Oct 1996

5110-01-487-6108
A Cap Pressing Tool

014876108
269T3321: RNCC: 3 | RNVC: 2
269T3321: RNCC: 5 | RNVC: 9
269T3321: RNCC: 5 | RNVC: 9

12 Aug 2001

5110-01-487-3468
Holding Tool Pulley

014873468
269T3320: RNCC: 3 | RNVC: 2
269T3320: RNCC: 3 | RNVC: 9

2 Aug 2001

5110-01-487-3456
Wrench Main Gearbox

014873456
269T9205: RNCC: 3 | RNVC: 2
269T9205: RNCC: 3 | RNVC: 9

2 Aug 2001

5110-01-431-4420
Deburring Blade

014314420
NOGA TYPE S30: RNCC: 3 | RNVC: 2

13 May 1996

5110-01-430-6009
Hand Wire Stripper-Crimper

014306009
908: RNCC: 3 | RNVC: 2

2 May 1996

5110-01-429-8148
Diagonal Cutting Pliers

014298148
812AEP: RNCC: 3 | RNVC: 2
812EP: RNCC: 5 | RNVC: 9

18 Apr 1996

5110-01-429-7465
Craftsman's Knife

014297465
YA580A: RNCC: 3 | RNVC: 2
YA582: RNCC: 3 | RNVC: 9
YA580: RNCC: 5 | RNVC: 9

17 Apr 1996

5110-01-429-7447
Hand Cold Chisel Set

014297447
B107.410: RNCC: 3 | RNVC: 1
PPC50AK: RNCC: 3 | RNVC: 2
B107.410 CAT 48 TY1CL2: RNCC: 5 | RNVC: 1
PPC50K: RNCC: 5 | RNVC: 9

17 Apr 1996

5110-01-486-1543
Hand Operated Wire Rope Cutter

014861543
P6300: RNCC: 3 | RNVC: 2

20 Jun 2001

5110-01-483-5192
Paper Cutter

014835192
422241: RNCC: 3 | RNVC: 2

30 Mar 2001

5110-01-480-7266
Hand File Set

014807266
GGG-F-331TY18CL1-12: RNCC: 3 | RNVC: 1

4 Dec 2000

5110-01-480-2006
Thread Restorer File

014802006
NUTRIX1: RNCC: 3 | RNVC: 9
TF1124: RNCC: 5 | RNVC: 1

9 Nov 2000

5110-01-413-1162
Hand Operated Cable Cutter

014131162
PWC39: RNCC: 3 | RNVC: 2

5 May 1995

5110-01-475-6985
Paper Cutter

014756985
S31778A: RNCC: 3 | RNVC: 2
S31778A: RNCC: 5 | RNVC: 9

9 Jun 2000

5110-01-474-4899
Pocket Folding Multi-Tool

014744899
07530: RNCC: 3 | RNVC: 2
MULTI-PLIER 600: RNCC: 5 | RNVC: 1
07530 FISKARS/GERBER: RNCC: 5 | RNVC: 2

4 May 2000

5110-01-473-9433
File Handle

014739433
890: RNCC: 3 | RNVC: 1
GEN 890: RNCC: 5 | RNVC: 1

19 Apr 2000

5110-01-395-4265
Pull-The Stud Chuck

013954265
S7921: RNCC: 3 | RNVC: 2

29 Aug 1994

5110-01-470-7748
Knife Blade

014707748
845-2007651PC120: RNCC: 3 | RNVC: 1

10 Jan 2000

5110-01-470-2382
0.50In Special Cap

014702382
903-7039092PC2: RNCC: 3 | RNVC: 1

13 Dec 1999

5110-01-470-2376
Skt Weld Jackng Dvc

014702376
903-7039092: RNCC: 3 | RNVC: 1

13 Dec 1999

5110-01-470-1601
42.5Dg Bevel Cutter

014701601
903-7039091PC10: RNCC: 3 | RNVC: 1

9 Dec 1999

5110-01-470-1597
Face Cutter

014701597
903-7039091PC9: RNCC: 3 | RNVC: 1

9 Dec 1999

5110-01-470-1589
Hand Reamer

014701589
903-7039091PC6: RNCC: 3 | RNVC: 1

9 Dec 1999

5110-01-470-1582
47.5Dg Bevel Cutter

014701582
903-7039091PC4: RNCC: 3 | RNVC: 1

9 Dec 1999

5110-01-470-1572
Guide Cylinder

014701572
903-7039091PC3: RNCC: 3 | RNVC: 1

9 Dec 1999

5110-01-470-1560
Finish Cutter

014701560
903-7039090PC2: RNCC: 3 | RNVC: 1

9 Dec 1999

5110-01-470-1556
Starter Cutter

014701556
903-7039090PC1: RNCC: 3 | RNVC: 1

9 Dec 1999

5110-01-470-1537
Min.Clr.Socwld Tool

014701537
903-7039090: RNCC: 3 | RNVC: 1

9 Dec 1999

5110-01-380-9357
Cable Stripper Blade Set

013809357
L-7486: RNCC: 3 | RNVC: 2

30 Sep 1993

5110-01-463-3660
Knockout Punch And Die

014633660
4A750: RNCC: 3 | RNVC: 2

18 Mar 1999

5110-01-377-2276
Hand Wire Stripper

013772276
45-1316: RNCC: 3 | RNVC: 2
45-1316: RNCC: 3 | RNVC: 2
45-1316: RNCC: 5 | RNVC: 2
45-1316: RNCC: 5 | RNVC: 2

9 Jul 1993

5110-01-377-2270
Hand Operated Cable Cutter

013772270
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 37 TY2CL1: RNCC: 5 | RNVC: 1
45-123: RNCC: 5 | RNVC: 2
45-123: RNCC: 5 | RNVC: 2
B107.37 TY2CL1: RNCC: 5 | RNVC: 9
B107.37: RNCC: 5 | RNVC: 9

9 Jul 1993

5110-01-377-2254
Wire Stripper Blade Set

013772254
45-1316-1: RNCC: 3 | RNVC: 2
45-1316-1: RNCC: 3 | RNVC: 2
45-1316-1: RNCC: 5 | RNVC: 2

9 Jul 1993

5110-01-377-2245
Hand Wire Stripper

013772245
45-1654: RNCC: 3 | RNVC: 2

9 Jul 1993

5110-01-377-2174
Wire Stripper Blade Set

013772174
45-1633-1: RNCC: 3 | RNVC: 2
45-1633-1: RNCC: 3 | RNVC: 2
45-1633-1: RNCC: 3 | RNVC: 2
45-1633-1: RNCC: 5 | RNVC: 2
45-1633-1: RNCC: 5 | RNVC: 2
45-1633-1: RNCC: 5 | RNVC: 9

9 Jul 1993

5110-01-462-4434
Hand Operated Cable Cutter Blade

014624434
SCT62024: RNCC: 3 | RNVC: 1

3 Feb 1999

5110-01-371-4025
Tube Cutter

013714025
R29549-1: RNCC: 3 | RNVC: 2

12 Feb 1993

5110-01-371-4026
Tube Cutter

013714026
R29549-2: RNCC: 3 | RNVC: 2

12 Feb 1993

5110-01-371-4019
Exposed Blade Tube Deburring Tool

013714019
R29550-1: RNCC: 3 | RNVC: 2

12 Feb 1993

5110-01-367-3898
File Holder

013673898
BF775C-A: RNCC: 3 | RNVC: 2
BF775C: RNCC: 5 | RNVC: 9

10 Nov 1992

5110-01-353-1709
Steel Strapping Cutter

013531709
L: RNCC: 3 | RNVC: 2

6 Feb 1992

5110-01-349-7605
Electricians' Scissors

013497605
925C: RNCC: 3 | RNVC: 2

3 Dec 1991

5110-01-349-4829
File Handle

013494829
GA618: RNCC: 3 | RNVC: 2

26 Nov 1991

5110-01-454-4247
Hand Cape Chisel

014544247
GGGC313TYISTYLASZ1/4: RNCC: 3 | RNVC: 1

30 Mar 1998

5110-01-454-4242
Hand Cape Chisel

014544242
GGGC313TY1STASZ0.375: RNCC: 3 | RNVC: 1

30 Mar 1998

5110-01-451-3397
Hand Reamer

014513397
GGG-B-180TY13GRB: RNCC: 4 | RNVC: 1
GGG-B-180TY13GRB: RNCC: 5 | RNVC: 1

12 Dec 1997

5110-01-335-1731
Dimpling Die

013351731
SMPD-212-4265: RNCC: 3 | RNVC: 2

6 Mar 1991

5110-01-335-1651
Punch And Die Set D

013351651
SMPD 212-4264: RNCC: 3 | RNVC: 2

6 Mar 1991

5110-01-335-1652
Punch And Die Set

013351652
SMPD 212-4263: RNCC: 3 | RNVC: 2

6 Mar 1991

5110-01-335-1520
Hand Cable Stripper

013351520
PWC23: RNCC: 3 | RNVC: 2

6 Mar 1991

5110-01-335-1516
Pocket Knife

013351516
A-A-59100: RNCC: 4 | RNVC: 1
YA113A: RNCC: 5 | RNVC: 9
34OT: RNCC: 5 | RNVC: 9

6 Mar 1991

5110-01-333-9801
Hand Operated Wire Rope Cutter

013339801
1213D2391: RNCC: 3 | RNVC: 2
1213D2391: RNCC: 3 | RNVC: 9
1213D1597 FIND 2: RNCC: 5 | RNVC: 2
1213D2391: RNCC: 5 | RNVC: 9
1213D1597 FIND 2: RNCC: 5 | RNVC: 9

14 Feb 1991

5110-01-446-9379
Plane Cutter Bit

014469379
845-6766197-29-300: RNCC: 3 | RNVC: 1

21 Jul 1997

5110-01-446-9380
Plane Cutter Bit

014469380
845-6766197-27-300: RNCC: 3 | RNVC: 1

21 Jul 1997

5110-01-327-4419
Honeycomb Cutter

013274419
218402: RNCC: 3 | RNVC: 9

14 Oct 1990

5110-01-446-4536
Plane Cutter Bit

014464536
845-6766197-12: RNCC: 3 | RNVC: 1

3 Jul 1997

5110-01-446-4527
Plane Cutter Bit

014464527
845-6766197-11: RNCC: 3 | RNVC: 1

3 Jul 1997

5110-01-446-4526
Plane Cutter Bit

014464526
845-6766197-11A: RNCC: 3 | RNVC: 1

3 Jul 1997

5110-01-324-1781
Rivet Cutter

013241781
ATI501R: RNCC: 3 | RNVC: 2
AS501R: RNCC: 5 | RNVC: 9
AT501R: RNCC: 5 | RNVC: 9

11 Aug 1990

5110-01-300-3505
Hand Operated Cable Cutter

013003505
188TE014: RNCC: 3 | RNVC: 2

12 May 1989

5110-01-290-3067
Blade Trimmer -.085

012903067
T-531: RNCC: 3 | RNVC: 9

9 Dec 1988

5110-01-290-3066
Blade Trimmer .141

012903066
T-530: RNCC: 3 | RNVC: 9

9 Dec 1988

5110-01-288-8313
Hand File

012888313
07444900: RNCC: 3 | RNVC: 9

17 Nov 1988

5110-01-430-5256
Hand File Set

014305256
SGHBF500A: RNCC: 3 | RNVC: 2
A-A-2311/2318/2320: RNCC: 4 | RNVC: 1
HBF500: RNCC: 5 | RNVC: 9
SGHBF500: RNCC: 5 | RNVC: 9

30 Apr 1996

5110-01-428-7285
Electrode Sharpener Blade

014287285
M90102: RNCC: 3 | RNVC: 2

1 Apr 1996

5110-01-282-3165
Deburring Tool

012823165
T-538: RNCC: 3 | RNVC: 9

13 Jul 1988

5110-01-282-3166
Trim Saw

012823166
T-510: RNCC: 3 | RNVC: 9

13 Jul 1988

5110-01-282-0741
Exposed Blade Tube Deburring Tool

012820741
T-539: RNCC: 3 | RNVC: 9

8 Jul 1988

5110-01-425-7421
Knife Blade

014257421
GG-H-0080: RNCC: 4 | RNVC: 1
GGH0080SZ12: RNCC: 5 | RNVC: 9

27 Feb 1996

5110-01-266-1969
Hand Reamer

012661969
SPT4-74D110174-5001TD: RNCC: 3 | RNVC: 2
TF02132-1: RNCC: 5 | RNVC: 2

22 Oct 1987

5110-01-266-1968
Hand Reamer

012661968
SPT3-74D110174-5001TD: RNCC: 3 | RNVC: 2
TF02131-1: RNCC: 5 | RNVC: 2

22 Oct 1987

5110-01-266-1967
Hand Reamer

012661967
SPT20-74D110174-5001TD: RNCC: 3 | RNVC: 2
TF02148-1: RNCC: 5 | RNVC: 2

22 Oct 1987

5110-01-266-1956
Hand Reamer

012661956
SPT8-74D110174-5001TD: RNCC: 3 | RNVC: 2
TF02136-1: RNCC: 5 | RNVC: 2

22 Oct 1987

5110-01-266-1960
Hand Reamer

012661960
SPT14-74D110174-5001TD: RNCC: 3 | RNVC: 2
TF02142-1: RNCC: 5 | RNVC: 2

22 Oct 1987

5110-01-266-1959
Hand Reamer

012661959
SPT13-74D110174-5001TD: RNCC: 3 | RNVC: 2
TF02141-1: RNCC: 5 | RNVC: 2

22 Oct 1987

5110-01-266-1962
Hand Reamer

012661962
SPT16-74D110174-5001TD: RNCC: 3 | RNVC: 2
TF02144-1: RNCC: 5 | RNVC: 2

22 Oct 1987

5110-01-266-1955
Hand Reamer

012661955
SPT7-74D110174-5001TD: RNCC: 3 | RNVC: 2
TF02135-1: RNCC: 5 | RNVC: 2

22 Oct 1987

5110-01-266-1954
Hand Reamer

012661954
SPT11-74D110174-5001TD: RNCC: 3 | RNVC: 2
TF02139-1: RNCC: 5 | RNVC: 2

22 Oct 1987

5110-01-421-6391
Pocket Knife

014216391
864242-24: RNCC: 3 | RNVC: 2

13 Nov 1995

5110-01-421-6367
Hand Hacksaw Frame

014216367
6914738: RNCC: 3 | RNVC: 2
713: RNCC: 5 | RNVC: 9

13 Nov 1995

5110-01-261-1782
Inclosed Blade Tube Deburring Tool

012611782
60A65-AC-1: RNCC: 3 | RNVC: 9

10 Aug 1987

5110-01-261-0703
Tube Cutter

012610703
05-1139: RNCC: 3 | RNVC: 2
9913574: RNCC: 3 | RNVC: 2

8 Aug 1987

5110-01-418-0859
Hand Operated Cable Cutter

014180859
711-4457300 PART 111: RNCC: 3 | RNVC: 1
4457300 PART 111: RNCC: 5 | RNVC: 1
4457300 PART 111L1SS: RNCC: 5 | RNVC: 2
2270-32 ITEM 111L1: RNCC: 5 | RNVC: 2
711-4457300 PART 111L1: RNCC: 5 | RNVC: 2
711-4457305 ITEM 111L1: RNCC: 5 | RNVC: 2

21 Aug 1995

5110-01-240-0467
Lead Wire Extractor

012400467
81-1-60: RNCC: 3 | RNVC: 2
DR0060: RNCC: 3 | RNVC: 2

7 Sep 1986

5110-01-240-0468
Lead Wire Extractor

012400468
81-1-80: RNCC: 3 | RNVC: 2
DR0080: RNCC: 3 | RNVC: 2

7 Sep 1986

5110-01-240-0470
Lead Wire Extractor

012400470
81-1-130: RNCC: 3 | RNVC: 2
DR0130: RNCC: 3 | RNVC: 2

7 Sep 1986

5110-01-240-0466
Lead Wire Extractor

012400466
81-1-45: RNCC: 3 | RNVC: 2
DR0045: RNCC: 3 | RNVC: 2

7 Sep 1986

5110-01-408-2371
Drill And Holder Assembly

014082371
946J924ITEM6: RNCC: 3 | RNVC: 1

13 Feb 1995

5110-01-406-8428
Diagonal Cutting Pliers

014068428
MS54-5: RNCC: 3 | RNVC: 9
MS54-5: RNCC: 5 | RNVC: 9

13 Jan 1995

5110-01-406-7201
Hand Cold Chisel

014067201
B107.410: RNCC: 3 | RNVC: 1
J86A3/4X8S2: RNCC: 3 | RNVC: 2
B107.410 CAT48 TY1CL2: RNCC: 5 | RNVC: 1
6DJU6: RNCC: 5 | RNVC: 2
86A 3/4X8: RNCC: 5 | RNVC: 9

10 Jan 1995

5110-01-222-9366
Angle Reamer

012229366
Y2931: RNCC: 3 | RNVC: 9

20 Dec 1985

5110-01-395-4047
Diagonal Cutting Pliers

013954047
1100-0206: RNCC: 3 | RNVC: 1

27 Aug 1994

5110-01-199-8602
File Handle

011998602
11: RNCC: 3 | RNVC: 2

26 Jan 1985

5110-01-189-9601
Hand Operated Cable Cutter

011899601
T-500: RNCC: 3 | RNVC: 9

21 Sep 1984

5110-01-383-3381
Hand Operated Wire Rope Cutter

013833381
211058120: RNCC: 3 | RNVC: 1
595-6401681-AY97: RNCC: 5 | RNVC: 1
211058120L1: RNCC: 5 | RNVC: 2
595-6401681-AY97L1: RNCC: 5 | RNVC: 2

22 Nov 1993

5110-01-383-3208
Hand Operated Wire Rope Cutter

013833208
211048793: RNCC: 3 | RNVC: 1
595-6401144-AY99: RNCC: 5 | RNVC: 1
211048793L1: RNCC: 5 | RNVC: 2
595-6401144-AY99L1: RNCC: 5 | RNVC: 2

22 Nov 1993

5110-01-381-0841
Special Seat Cutter

013810841
845-6766197: RNCC: 3 | RNVC: 9

7 Oct 1993

5110-01-381-0808
Bolt Cutter Jaws

013810808
0313NE: RNCC: 3 | RNVC: 2
A-A-3047: RNCC: 4 | RNVC: 1
A-A-3047 CL3: RNCC: 5 | RNVC: 1

7 Oct 1993

5110-01-381-0790
Bolt Cutter Jaws

013810790
0113A: RNCC: 3 | RNVC: 2
A-A-3047: RNCC: 4 | RNVC: 1
A-A-3047 CL1: RNCC: 5 | RNVC: 1

7 Oct 1993

5110-01-372-4248
Craftsman's Knife

013724248
AAKH: RNCC: 3 | RNVC: 2
B-2-MK121-6: RNCC: D | RNVC: 9

10 Mar 1993

5110-01-155-4076
Conical Deburring Tool

011554076
DB-18: RNCC: 3 | RNVC: 9

8 Jun 1983

5110-01-155-3931
Tube Cutter Cutting Wheel

011553931
D12532-109: RNCC: 3 | RNVC: 2

8 Jun 1983

5110-01-370-3044
Wire Stripper Blade

013703044
13229E9220: RNCC: 3 | RNVC: 2

19 Jan 1993

5110-01-142-9864
Tube And Pipe End Cutter

011429864
39663: RNCC: 3 | RNVC: 9

24 Nov 1982

5110-01-364-9817
Special Wheel Roller Cutter

013649817
903-6339118: RNCC: 3 | RNVC: 9

28 Sep 1992

5110-01-364-9816
Special Roller Cutter

013649816
903-6339118PC9: RNCC: 3 | RNVC: 9

28 Sep 1992

5110-01-363-6432
Special Hatch

013636432
8542A102: RNCC: 3 | RNVC: 2

2 Sep 1992

5110-01-139-5180
Hand Reamer

011395180
91250000: RNCC: 3 | RNVC: 9

4 Oct 1982

5110-01-362-3170
Hand Operated Cable Cutter

013623170
565-528-048: RNCC: 3 | RNVC: 9
409-69029-8: RNCC: 5 | RNVC: 2
565-528-048: RNCC: C | RNVC: 1

4 Aug 1992

5110-01-134-1626
Hand Reamer

011341626
91240000: RNCC: 3 | RNVC: 9

28 Jun 1982

5110-01-133-8531
Tube Cutter

011338531
250220001: RNCC: 3 | RNVC: 9

22 Jun 1982

5110-01-133-3332
Tube Cutter

011333332
25017-0004: RNCC: 3 | RNVC: 9
250170004: RNCC: 5 | RNVC: 9

12 Jun 1982

5110-01-132-9704
Tube Cutter

011329704
250050001: RNCC: 3 | RNVC: 9

8 Jun 1982

5110-01-132-9495
Cutter

011329495
396640000: RNCC: 3 | RNVC: 9

8 Jun 1982

5110-01-132-9496
Cutter

011329496
396650000: RNCC: 3 | RNVC: 9

8 Jun 1982

5110-01-132-9498
Cutter

011329498
397030000: RNCC: 3 | RNVC: 9

8 Jun 1982

5110-01-132-9497
Cutter

011329497
397020000: RNCC: 3 | RNVC: 9

8 Jun 1982

5110-01-132-9494
Cutter

011329494
396630000: RNCC: 3 | RNVC: 9

8 Jun 1982

5110-01-132-7562
Boiler Tube Cutter Cutter Bit

011327562
72936-0001: RNCC: 3 | RNVC: 9

4 Jun 1982

5110-01-131-6620
Tube Cutter

011316620
25010-0004: RNCC: 3 | RNVC: 9
250100004: RNCC: 5 | RNVC: 9

14 May 1982

5110-01-131-6487
Collapsing Tool

011316487
21911-0000: RNCC: 3 | RNVC: 9
219110000: RNCC: 5 | RNVC: 9

14 May 1982

5110-01-131-6488
Collapsing Tool

011316488
21912-0000: RNCC: 3 | RNVC: 9
219120000: RNCC: 5 | RNVC: 9

14 May 1982

5110-01-131-6481
Cutter

011316481
21562-0000: RNCC: 3 | RNVC: 9
215620000: RNCC: 5 | RNVC: 9

14 May 1982

5110-01-131-6482
Cutter

011316482
21563-0000: RNCC: 3 | RNVC: 9
215630000: RNCC: 5 | RNVC: 9

14 May 1982

5110-01-131-6479
Flat Trimmer

011316479
21525-0000: RNCC: 3 | RNVC: 9
215250000: RNCC: 5 | RNVC: 9

14 May 1982

5110-01-131-6480
Flat Trimmer

011316480
21533-0000: RNCC: 3 | RNVC: 9
215330000: RNCC: 5 | RNVC: 9

14 May 1982

5110-01-131-6478
Flat Trimmer

011316478
21527-0000: RNCC: 3 | RNVC: 9
215270000: RNCC: 5 | RNVC: 9

14 May 1982

5110-01-131-6474
Tube Wall Reducing Tool

011316474
20300-0000: RNCC: 3 | RNVC: 9
203000000: RNCC: 5 | RNVC: 9

14 May 1982

5110-01-131-6472
Reducing Tube Wall

011316472
20297-0000: RNCC: 3 | RNVC: 9
202970000: RNCC: 5 | RNVC: 9

14 May 1982

5110-01-131-6473
Wall Reducing Tube

011316473
20295-0000: RNCC: 3 | RNVC: 9
202950000: RNCC: 5 | RNVC: 9

14 May 1982

5110-01-124-5040
Collapsing Tool

011245040
21910: RNCC: 3 | RNVC: 9

6 Jan 1982

5110-01-122-3884
Tube End Reamer

011223884
B94.2: RNCC: 3 | RNVC: 1
21365: RNCC: 5 | RNVC: 9

20 Nov 1981

5110-01-355-0637
Hand Reamer

013550637
J 33880-1: RNCC: 3 | RNVC: 2

11 Mar 1992

5110-01-355-0636
Hand Reamer

013550636
J 33880-5: RNCC: 3 | RNVC: 2

11 Mar 1992

5110-01-353-3127
Hand Reamer

013533127
SW-PTP-34052(FLUTE): RNCC: 3 | RNVC: 1
SW-PTP-34052(FLUTE0.630): RNCC: 5 | RNVC: 1

8 Feb 1992

5110-01-352-4897
Hand Wire Stripper

013524897
45-187: RNCC: 3 | RNVC: 9

27 Jan 1992

5110-01-339-3533
Bench Wire Stripper

013393533
7012-0002: RNCC: 3 | RNVC: 1

21 May 1991

5110-01-084-1031
Knife Blade

010841031
GA169-5A: RNCC: 3 | RNVC: 2
GA169-5: RNCC: 5 | RNVC: 9

10 Oct 1979

5110-01-077-8868
Dimpling Die

010778868
ZT1868-10: RNCC: 3 | RNVC: 2

1 Jun 1979

5110-01-327-2585
Cylinder Ridge Reamer

013272585
8374969: RNCC: 3 | RNVC: 2
8374969: RNCC: 5 | RNVC: 9

10 Oct 1990

5110-01-325-3681
Dimpling Punch

013253681
143E607-4: RNCC: 3 | RNVC: 9
143E607-4: RNCC: C | RNVC: 1

2 Sep 1990

5110-01-320-6585
Adjustment Rod

013206585
A3018900-1: RNCC: 3 | RNVC: 2

30 May 1990

5110-01-317-7583
Hand Reamer

013177583
16VA11683-1: RNCC: 3 | RNVC: 2
16VA11683-1: RNCC: 5 | RNVC: 9
5110PL0876694: RNCC: 6 | RNVC: 9

5 Apr 1990

5110-01-317-0275
Hand Reamer

013170275
UDB911686-1: RNCC: 3 | RNVC: 2
16VA11686: RNCC: 5 | RNVC: 2
16VA11686-1: RNCC: D | RNVC: 9

21 Mar 1990

5110-01-316-9141
Hand Reamer

013169141
16VA11687-1: RNCC: 3 | RNVC: 2
UDB911687: RNCC: 5 | RNVC: 2
16VA11687: RNCC: 5 | RNVC: 2
5110PL0913774: RNCC: 6 | RNVC: 9

16 Mar 1990

5110-01-316-9142
Hand Reamer

013169142
16VA11688-1: RNCC: 1 | RNVC: 2
UDB911688: RNCC: 3 | RNVC: 2
16VA11688: RNCC: 5 | RNVC: 9

16 Mar 1990

5110-01-316-9140
Hand Reamer

013169140
16VA11865-1: RNCC: 3 | RNVC: 2
UDB911865: RNCC: 3 | RNVC: 2

16 Mar 1990

5110-01-315-2460
Craftsman's Knife

013152460
250-534-3: RNCC: 3 | RNVC: 2
250-534-3: RNCC: 5 | RNVC: 9

13 Feb 1990

5110-01-308-2441
Wire Cutting And Skinning Tool

013082441
B107.500: RNCC: 3 | RNVC: 1
99050530: RNCC: 3 | RNVC: 9
B107.500 CAT 37 TY1CL1: RNCC: 5 | RNVC: 1
11466765-2: RNCC: 5 | RNVC: 2
99050530: RNCC: 5 | RNVC: 9
99050530: RNCC: 5 | RNVC: 9

27 Sep 1989

5110-01-304-9706
Hand Hacksaw Blade

013049706
B94.52M: RNCC: 3 | RNVC: 1
224HE: RNCC: 5 | RNVC: 1
NF1224: RNCC: 5 | RNVC: 2
HHCB1224-2: RNCC: 5 | RNVC: 2
224HE: RNCC: 5 | RNVC: 9
22-424: RNCC: 5 | RNVC: 9
22-424: RNCC: 5 | RNVC: 9
NF1224: RNCC: 5 | RNVC: 9
602250: RNCC: 5 | RNVC: 9

29 Jul 1989

5110-01-292-3831
Pkg Install Tool Special

012923831
820-5787457: RNCC: 3 | RNVC: 1

14 Jan 1989

5110-01-291-1671
Tool Set

012911671
1552AS107-15: RNCC: 3 | RNVC: 2

24 Dec 1988

5110-01-282-2760
Hand Operated Cable Cutter

012822760
3382: RNCC: 3 | RNVC: 9
3382: RNCC: C | RNVC: 1

13 Jul 1988

5110-00-933-5268
Tube Cutter

009335268
72885: RNCC: 3 | RNVC: 9
PD171-1: RNCC: 5 | RNVC: 9
Y2885: RNCC: 5 | RNVC: 9

2 Sep 1966

5110-00-933-5269
Inclosed Blade Tube Deburring Tool

009335269
72889: RNCC: 3 | RNVC: 9

2 Sep 1966

5110-01-262-8336
Pipe Cutter Cutting Wheel

012628336
33110: RNCC: 3 | RNVC: 9
903-5912049 PC4: RNCC: 5 | RNVC: 9

4 Sep 1987

5110-01-256-0843
Special Chisel

012560843
1930F49IT.6: RNCC: 3 | RNVC: 1

31 May 1987

5110-01-256-0842
Special Chisel

012560842
1930F49IT4: RNCC: 3 | RNVC: 1

31 May 1987

5110-01-253-2331
Diagonal Cutting Pliers

012532331
792-4: RNCC: 3 | RNVC: 2
792-4: RNCC: 5 | RNVC: 9

14 Apr 1987

5110-01-250-8218
Pipe Cutter

012508218
903-5912048: RNCC: 3 | RNVC: 9

7 Mar 1987

5110-01-250-6241
Pipe Cutter

012506241
903-5912049: RNCC: 3 | RNVC: 9

4 Mar 1987

5110-01-236-3877
Hand Reamer

012363877
220K611109-71: RNCC: 3 | RNVC: 2

16 Jul 1986

5110-01-235-4211
Escalator Lift Tool

012354211
179161-469-9: RNCC: 3 | RNVC: 2
VP-878095: RNCC: 5 | RNVC: 2

30 Jun 1986

5110-01-228-5395
Hand Reamer

012285395
RE868230001-135: RNCC: 3 | RNVC: 2

18 Mar 1986

5110-01-227-6575
Underbead Cart Assy

012276575
2960C25: RNCC: 3 | RNVC: 1

6 Mar 1986

5110-01-227-6570
C-Washer Tool

012276570
2219C99-2: RNCC: 3 | RNVC: 1

6 Mar 1986

5110-01-221-3370
Heating Pedestal

012213370
85C7094-1: RNCC: 3 | RNVC: 2
85C7094: RNCC: 5 | RNVC: 9

28 Nov 1985

5110-00-785-1016
Hand Reamer

007851016
J-22525-1: RNCC: 3 | RNVC: 2
10881897: RNCC: 3 | RNVC: 2
2AH827: RNCC: 5 | RNVC: 2
J-5286-7: RNCC: 5 | RNVC: 9
2AH827: RNCC: 5 | RNVC: 9
5110007851016: RNCC: 6 | RNVC: 9

1 Jan 1963

5110-01-209-2664
Cleanup Tool

012092664
163C8918P1: RNCC: 3 | RNVC: 1
163C8918: RNCC: 5 | RNVC: 1

25 May 1985

5110-01-208-4726
Hand Reamer

012084726
91-4006-25: RNCC: 3 | RNVC: 2
91-4006-25: RNCC: 3 | RNVC: 9

15 May 1985

5110-01-206-2600
Hand Operated Wire Rope Cutter

012062600
96CG: RNCC: 3 | RNVC: 2
1178M: RNCC: 5 | RNVC: 2
1178M: RNCC: 5 | RNVC: 9
670-5CJS: RNCC: 5 | RNVC: 9
96CG: RNCC: 5 | RNVC: 9

16 Apr 1985

5110-01-204-5070
Hand Reamer

012045070
003-0652: RNCC: 3 | RNVC: 2
003 0652: RNCC: 3 | RNVC: 2
003 0652: RNCC: 5 | RNVC: 2
122463: RNCC: 5 | RNVC: 2
122463: RNCC: 5 | RNVC: 9

27 Mar 1985

5110-01-203-7945
Hand Reamer

012037945
030-452: RNCC: 3 | RNVC: 2
003 0452: RNCC: 5 | RNVC: 2
003-0452: RNCC: 5 | RNVC: 2
003 0452: RNCC: 5 | RNVC: 2
123510: RNCC: 5 | RNVC: 2
129-5260: RNCC: 5 | RNVC: 9
003-0452: RNCC: 5 | RNVC: 9
123510: RNCC: 5 | RNVC: 9

20 Mar 1985

5110-01-191-1859
Cutter Blade

011911859
PWA55366-7: RNCC: 3 | RNVC: 2

6 Oct 1984

5110-01-188-8876
File Handle

011888876
18975: RNCC: 3 | RNVC: 2
18975: RNCC: 5 | RNVC: 9

8 Sep 1984

5110-00-721-6810
Pocket Knife

007216810
PD5110-00-721-6810: RNCC: 3 | RNVC: 2
772: RNCC: 5 | RNVC: 9
GGG-K-484 TY3CL2STBSZ3-7/8GRA: RNCC: 5 | RNVC: 9
GGG-K-484: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-164-9513
Dimpling Press

011649513
S3S13006000: RNCC: 3 | RNVC: 2

24 Oct 1983

5110-01-154-1206
Hand Reamer

011541206
91-4006-7: RNCC: 3 | RNVC: 9
91-4006-7: RNCC: C | RNVC: 1

20 May 1983

5110-01-154-1205
Hand Reamer

011541205
91-4006-5: RNCC: 3 | RNVC: 9
91-4006-5: RNCC: C | RNVC: 1

20 May 1983

5110-01-154-1209
Hand Reamer

011541209
91-4006-27: RNCC: 3 | RNVC: 9
91-4006-27: RNCC: C | RNVC: 1

20 May 1983

5110-01-154-1210
Hand Reamer

011541210
91-4006-29: RNCC: 3 | RNVC: 9
91-4006-29: RNCC: C | RNVC: 1

20 May 1983

5110-01-154-1208
Hand Reamer

011541208
91-4006-23: RNCC: 3 | RNVC: 9
91-4006-23: RNCC: C | RNVC: 1

20 May 1983

5110-01-154-1207
Hand Reamer

011541207
91-4006-11: RNCC: 3 | RNVC: 9
91-4006-11: RNCC: C | RNVC: 1

20 May 1983

5110-01-154-1203
Hand Reamer

011541203
91-4006-9: RNCC: 3 | RNVC: 9
91-4006-9: RNCC: C | RNVC: 1

20 May 1983

5110-01-149-3214
Hand Reamer

011493214
216L099963-3/4: RNCC: 3 | RNVC: 2
216L09996-101: RNCC: 5 | RNVC: 9

18 Mar 1983

5110-01-142-9289
Hand Reamer

011429289
110C214-091C: RNCC: 3 | RNVC: 2

22 Nov 1982

5110-01-141-9040
Hand Reamer

011419040
GTPROD-F: RNCC: 3 | RNVC: 2

7 Nov 1982

5110-01-141-9039
Hand Reamer

011419039
GTPROD-E: RNCC: 3 | RNVC: 2

7 Nov 1982

5110-01-141-9038
Hand Reamer

011419038
GTPROD-D: RNCC: 3 | RNVC: 2

7 Nov 1982

5110-01-141-9036
Hand Reamer

011419036
GTPROD-B: RNCC: 3 | RNVC: 2

7 Nov 1982

5110-01-141-9037
Hand Reamer

011419037
GTPROD-C: RNCC: 3 | RNVC: 2

7 Nov 1982

5110-01-140-6100
Hand Reamer

011406100
375B506-024B: RNCC: 3 | RNVC: 2

14 Oct 1982

5110-01-140-6099
Hand Reamer

011406099
375B506-020B: RNCC: 3 | RNVC: 2

14 Oct 1982

5110-01-139-6745
Hand Reamer

011396745
375B999-052CA: RNCC: 3 | RNVC: 2
375B999-052GA: RNCC: 5 | RNVC: 9

5 Oct 1982

5110-01-139-5022
Adz Handle

011395022
0N502858: RNCC: 3 | RNVC: 2

3 Oct 1982

5110-00-595-9497
Knockout Punch And Die

005959497
5110-00-595-9497: RNCC: 3 | RNVC: 2
GGG-P-836: RNCC: 4 | RNVC: 1
GGG-P-836 TY2: RNCC: 5 | RNVC: 1
5110-00-595-9497: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-01-136-4867
Inclosed Blade Tube Deburring Tool

011364867
13221E6827: RNCC: 3 | RNVC: 2

10 Aug 1982

5110-01-133-8812
Hand Wire Stripper

011338812
WSU30M: RNCC: 3 | RNVC: 2
WSU30M: RNCC: 5 | RNVC: 9

22 Jun 1982

5110-01-133-4685
Hand Reamer

011334685
23003605: RNCC: 3 | RNVC: 2
23003605: RNCC: 5 | RNVC: 2
23003605: RNCC: 5 | RNVC: 9

15 Jun 1982

5110-01-121-5746
Pro-Vice

011215746
7016-0003: RNCC: 3 | RNVC: 1

6 Nov 1981

5110-01-112-6760
External Cutter Assembly

011126760
PWA51153-8: RNCC: 3 | RNVC: 2

8 May 1981

5110-01-090-9205
Serrated Blade

010909205
LCC62-1: RNCC: 3 | RNVC: 9

27 Feb 1980

5110-01-090-7424
Hp Compressor Front Bearing Reamer

010907424
6899909: RNCC: 3 | RNVC: 2
4001-25664: RNCC: 5 | RNVC: 2
4001-25664: RNCC: 5 | RNVC: 9
6899909: RNCC: 5 | RNVC: 9

23 Feb 1980

5110-01-088-4318
Hand Wire Stripper

010884318
45-181: RNCC: 3 | RNVC: 1

12 Jan 1980

5110-01-088-2150
Blade

010882150
FCC65-7: RNCC: 3 | RNVC: 9

8 Jan 1980

5110-01-081-0946
Reamer

010810946
6899959: RNCC: 3 | RNVC: 2
6899959: RNCC: 5 | RNVC: 9

8 Aug 1979

5110-01-074-6079
Special Tool

010746079
916E513114-1: RNCC: 3 | RNVC: 1

4 Apr 1979

5110-01-066-4299
Cutter Broach

010664299
9430M79P04: RNCC: 3 | RNVC: 2

10 Oct 1978

5110-01-066-1290
Cutter Broach

010661290
9430M79P03: RNCC: 3 | RNVC: 2

1 Oct 1978

5110-01-065-8513
Boron Repair Special Cutter

010658513
A51S62286-27: RNCC: 3 | RNVC: 2
A51S62286-27: RNCC: 3 | RNVC: 9
A51S62286-27: RNCC: 5 | RNVC: 9

24 Sep 1978

5110-01-064-8934
Boron Repair Special Cutter

010648934
A51S62286-31: RNCC: 3 | RNVC: 2
A51S62286-31: RNCC: 3 | RNVC: 9
A51S62286-31: RNCC: 5 | RNVC: 9

5 Sep 1978

5110-01-059-2796
Boron Repair Special Cutter

010592796
A51S62286-37: RNCC: 3 | RNVC: 2
A51S62286-37: RNCC: 3 | RNVC: 9
A51S62286-37: RNCC: 5 | RNVC: 9

9 Apr 1978

5110-01-059-2794
Boron Repair Special Cutter

010592794
A51S62286-33: RNCC: 3 | RNVC: 2
A51S62286-33: RNCC: 3 | RNVC: 9
A51S62286-33: RNCC: 5 | RNVC: 9

9 Apr 1978

5110-01-036-8264
Number Six Cutter

010368264
9432M64P13: RNCC: 3 | RNVC: 2

7 Mar 1977

5110-01-034-9715
Number Four Cutter

010349715
9432M64P05: RNCC: 3 | RNVC: 9
9432M64P05: RNCC: 5 | RNVC: 9
9432M64: RNCC: 5 | RNVC: 9

1 Feb 1977

5110-01-034-8962
Number One Cutter

010348962
9432M64P02: RNCC: 3 | RNVC: 2

1 Feb 1977

5110-01-034-8961
Number Two Cutter

010348961
9432M64P03: RNCC: 3 | RNVC: 2

1 Feb 1977

5110-01-033-6875
Paint Scraper

010336875
908816-1: RNCC: 3 | RNVC: 2
908816-1: RNCC: 5 | RNVC: 2
908816-1: RNCC: 5 | RNVC: 9

8 Jan 1977

5110-01-032-2831
Number Five Cutter

010322831
9432M64P06: RNCC: 3 | RNVC: 2

10 Dec 1976

5110-00-350-3747
Tabbing Shears

003503747
8184: RNCC: 3 | RNVC: 9
08184: RNCC: 5 | RNVC: 9

7 Jan 1972

5110-00-293-2427
Hardy

002932427
GGG-T-00563: RNCC: 4 | RNVC: 1
GGG-T-00563 TY5: RNCC: 5 | RNVC: 1
G10-2427: RNCC: 5 | RNVC: 9
GGG-T-563 TY5: RNCC: 5 | RNVC: 9
GGG-T-563: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-0275
Hand File

002930275
5110-00-293-0275: RNCC: 3 | RNVC: 2
09099: RNCC: 5 | RNVC: 2
A-A-2316: RNCC: 5 | RNVC: 9
09099: RNCC: 5 | RNVC: 9
GGG-F-325 TY13CL4: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-289-0001
Hand Metal Stamping Die Set

002890001
5110-00-289-0001: RNCC: 3 | RNVC: 2
5110-00-289-0001: RNCC: 5 | RNVC: 2
1634T11: RNCC: 5 | RNVC: 2
GGG-D-280: RNCC: 5 | RNVC: 9
MS16534-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-247-2565
Hand File Set

002472565
37398: RNCC: 3 | RNVC: 2
6A632: RNCC: 5 | RNVC: 2
37398: RNCC: 5 | RNVC: 9

3 Jul 1969

5110-00-240-6033
Flat Face Cutter

002406033
E172-195ITEM334: RNCC: 3 | RNVC: 2
E169-358ITEM332: RNCC: 3 | RNVC: 2
FIG3-2-42 PC Y2914-1: RNCC: 5 | RNVC: 2
72914-0001: RNCC: 5 | RNVC: 9
Y2914-1: RNCC: 5 | RNVC: 9

3 Nov 1969

5110-00-240-6035
Cutter Assy

002406035
Y2936: RNCC: 3 | RNVC: 9
D168-744PIN0Y2936: RNCC: 5 | RNVC: 9

3 Nov 1969

5110-00-238-9664
Hand File

002389664
A-A-2320: RNCC: 4 | RNVC: 1
07083208: RNCC: 5 | RNVC: 2
13310: RNCC: 5 | RNVC: 2
13310: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
13310: RNCC: 5 | RNVC: 9
GGG-F-325 TY17STA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-233-3657
Knockout Punch And Die

002333657
GGG-P-836: RNCC: 4 | RNVC: 1
GGG-P-836 TY1CL1: RNCC: 5 | RNVC: 1
5110-00-233-3657: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-222-4453
Draw Knife

002224453
GGG-K-471: RNCC: 4 | RNVC: 1
GGG-K-471 TY2: RNCC: 5 | RNVC: 1
MS16661-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-177-7285
Hand Wire Stripper

001777285
PD5110-00-177-7285: RNCC: 3 | RNVC: 2
45-176: RNCC: 5 | RNVC: 2
GGG-S-665: RNCC: 5 | RNVC: 9
GGG-S-665 TY2CL2STB: RNCC: 5 | RNVC: 9

15 Jan 1971

5110-00-156-0077
Hand File

001560077
5110-00-156-0077: RNCC: 3 | RNVC: 2
37849: RNCC: 5 | RNVC: 2
A-A-2447: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
37849: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL6: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-025-9869
Tube Cutter Cutting Wheel

000259869
D12530-109: RNCC: 3 | RNVC: 2
D12530-109: RNCC: 5 | RNVC: 2
D9872-114: RNCC: 5 | RNVC: 9

17 Oct 1972

5110-00-019-5240
Hand Reamer

000195240
J-4986-01: RNCC: 3 | RNVC: 2
10881903: RNCC: 3 | RNVC: 2
J-4986-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-011-3881
Hand Wire Stripper

010113881
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 37 TY2CL1: RNCC: 5 | RNVC: 1
1278531-1: RNCC: 5 | RNVC: 2
45-121: RNCC: 5 | RNVC: 2
7014622-32: RNCC: 5 | RNVC: 2
B107.37: RNCC: 5 | RNVC: 9
GGG-S-665: RNCC: 5 | RNVC: 9
GGG-S-665 TY2CL3SZ2: RNCC: 5 | RNVC: 9
T6: RNCC: 5 | RNVC: 9
B107.37 TY2CL1: RNCC: 5 | RNVC: 9

21 Oct 1975

5110-01-008-8045
Double Bow Cutting Punch Set

010088045
C130: RNCC: 3 | RNVC: 2
1100: RNCC: 5 | RNVC: 9

30 Aug 1975

5110-00-985-2714
Hand Reamer

009852714
2550188: RNCC: 3 | RNVC: 2
2550188: RNCC: 5 | RNVC: 9

28 Oct 1966

5110-00-952-1693
Chain Saw Filing Guide

009521693
G109: RNCC: 3 | RNVC: 9

1 Jan 1962

5110-00-950-4296
Special Reamer

009504296
253471-2: RNCC: 3 | RNVC: 2

22 Apr 1966

5110-00-950-4295
Special Reamer

009504295
253471-1: RNCC: 3 | RNVC: 2

22 Apr 1966

5110-00-938-4525
End Cutting Nippers

009384525
092541: RNCC: 3 | RNVC: 2
104P: RNCC: 3 | RNVC: 2
J1024B: RNCC: 5 | RNVC: 2

9 Mar 1970

5110-00-938-4331
Diagonal Cutting Pliers

009384331
HL279400: RNCC: 3 | RNVC: 2

9 Mar 1970

5110-00-937-9814
Hand Cold Chisel

009379814
2113224: RNCC: 3 | RNVC: 2

15 Feb 1967

5110-00-937-9812
Hand Cold Chisel

009379812
BUWEPSDWG2113222: RNCC: 3 | RNVC: 2
2113222: RNCC: 3 | RNVC: 2

15 Feb 1967

5110-00-937-9807
Diagonal Cutting Pliers

009379807
BUWEPSDWG2113217: RNCC: 3 | RNVC: 2
2113217: RNCC: 3 | RNVC: 2
21132217: RNCC: 3 | RNVC: 9

15 Feb 1967

5110-00-937-4069
Hand Reamer

009374069
7799721: RNCC: 3 | RNVC: 2

16 Dec 1966

5110-00-933-5733
Pliers

009335733
P205: RNCC: 3 | RNVC: 9

7 Sep 1966

5110-00-868-0244
Hand Wire Stripper

008680244
R3088: RNCC: 3 | RNVC: 2
R3088: RNCC: 5 | RNVC: 9

1 Jan 1960

5110-00-867-8149
Pliers

008678149
CG5627: RNCC: 3 | RNVC: 9
EC54: RNCC: C | RNVC: 1

1 Jan 1960

5110-00-860-3377
Handsaw Filing Guide

008603377
20: RNCC: 3 | RNVC: 2
4560A3: RNCC: 5 | RNVC: 9

3 Feb 1983

5110-00-854-1176
Plug Seat Cutter

008541176
PWA22446: RNCC: 3 | RNVC: 2

25 Sep 1967

5110-00-854-1177
Cutter Plug Seat

008541177
PWA22447: RNCC: 3 | RNVC: 2

25 Sep 1967

5110-00-850-0424
Hand Reamer

008500424
6798484: RNCC: 1 | RNVC: 2
HU 9776: RNCC: 3 | RNVC: 2
6798484: RNCC: 3 | RNVC: 2
6798484: RNCC: 3 | RNVC: 2
6798484: RNCC: 5 | RNVC: 9
6798484: RNCC: 5 | RNVC: 9

22 Sep 1967

5110-00-847-3172
Hand Cold Chisel

008473172
2847200: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-00-847-0350
Hand Reamer

008470350
6798485: RNCC: 3 | RNVC: 2
6798485: RNCC: 5 | RNVC: 9

20 Sep 1967

5110-00-847-0321
Hand Reamer

008470321
6798483: RNCC: 3 | RNVC: 2

20 Sep 1967

5110-00-833-4503
Hand Reamer

008334503
6798751: RNCC: 3 | RNVC: 2

8 Sep 1967

5110-00-833-4421
Hand Reamer

008334421
6798465: RNCC: 3 | RNVC: 2

8 Sep 1967

5110-00-833-4415
Hand Reamer

008334415
6798489: RNCC: 3 | RNVC: 2
6798489: RNCC: 5 | RNVC: 9

8 Sep 1967

5110-00-833-4412
Hand Reamer

008334412
6798482: RNCC: 3 | RNVC: 2
6798482: RNCC: 5 | RNVC: 9

8 Sep 1967

5110-00-833-4409
Hand Reamer

008334409
6798462: RNCC: 3 | RNVC: 2
6798462: RNCC: 5 | RNVC: 9

8 Sep 1967

5110-00-833-4411
Hand Reamer

008334411
6798466: RNCC: 3 | RNVC: 2

8 Sep 1967

5110-00-833-4403
Hand Reamer

008334403
6798461: RNCC: 3 | RNVC: 2
6798461: RNCC: 5 | RNVC: 9

8 Sep 1967

5110-00-833-4402
Hand Reamer

008334402
6798460: RNCC: 3 | RNVC: 2
6798460: RNCC: 5 | RNVC: 9

8 Sep 1967

5110-00-833-4401
Hand Reamer

008334401
6798459: RNCC: 3 | RNVC: 2
6798459: RNCC: 5 | RNVC: 9

8 Sep 1967

5110-00-832-4175
Craftsman's Knife

008324175
1286848: RNCC: 3 | RNVC: 2
2113228: RNCC: 5 | RNVC: 2
2113228: RNCC: 5 | RNVC: 2
2113228: RNCC: 5 | RNVC: 2

17 Feb 1967

5110-00-776-1296
Reamer

007761296
808740: RNCC: 3 | RNVC: 2

1 Jan 1960

5110-00-765-4144
Knife Blade

007654144
5110-00-765-4144: RNCC: 3 | RNVC: 2
X16: RNCC: 5 | RNVC: 2
GGG-K-00450: RNCC: 5 | RNVC: 9
GGG-K-00450 TY1CL1ST3: RNCC: 5 | RNVC: 9
16: RNCC: 5 | RNVC: 9
5110-00-765-4144: RNCC: 5 | RNVC: 9
X16: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-00-754-1499
Ladies' Scissors

007541499
5110-00-754-1499: RNCC: 3 | RNVC: 2
GGG-S-278 TY2CL2: RNCC: 5 | RNVC: 9
GGG-S-278: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-00-752-8988
Pipe Cutter

007528988
SK785: RNCC: 3 | RNVC: 1
REEDCATN04-1: RNCC: 5 | RNVC: 1
CAT-4-1: RNCC: 5 | RNVC: 1
1-4: RNCC: 5 | RNVC: 1
913C965PC1: RNCC: 5 | RNVC: 1

1 Jan 1962

5110-00-678-2692
Knife Blade

006782692
2159612: RNCC: 3 | RNVC: 2

1 Jan 1961

5110-00-596-9369
Bearing Scraper

005969369
PD5110-00-596-9369: RNCC: 3 | RNVC: 2
242: RNCC: 5 | RNVC: 2
59016: RNCC: 5 | RNVC: 2
GGG-S-113 TY1: RNCC: 5 | RNVC: 9
GGG-S-113: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-595-8400
Craftsman's Knife

005958400
5110-00-595-8400: RNCC: 3 | RNVC: 2
5110-00-595-8400: RNCC: 5 | RNVC: 2
GGG-K-450: RNCC: 5 | RNVC: 9
GGG-K-00450 TY1CL2ST1ST2ST3ST4: RNCC: 5 | RNVC: 9
GGG-K-00450: RNCC: 5 | RNVC: 9
GGG-K-450 TY1CL2ST1ST2ST3ST4: RNCC: 5 | RNVC: 9
10355683: RNCC: 6 | RNVC: 9

1 Jan 1963

5110-00-595-8295
Hand File

005958295
5110-00-595-8295: RNCC: 3 | RNVC: 2
125758: RNCC: 5 | RNVC: 2
HB5: RNCC: 5 | RNVC: 2
A-A-2455: RNCC: 5 | RNVC: 9
GGG-F-331 TY22: RNCC: 5 | RNVC: 9
MS30672-10: RNCC: 5 | RNVC: 9
125758: RNCC: 5 | RNVC: 9
138-30: RNCC: 5 | RNVC: 9
138-30: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-555-9500
Hand Metal Cutting Shears

005559500
PD5110-00-555-9500: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-542-4487
Hand Wire Stripper

005424487
PD5110-00-542-4487: RNCC: 3 | RNVC: 2
9177208-1: RNCC: 5 | RNVC: 2
744A: RNCC: 5 | RNVC: 2
GGG-S-665: RNCC: 5 | RNVC: 9
GGG-S-665 TY2CL2STASZ5: RNCC: 5 | RNVC: 9
744-A: RNCC: 5 | RNVC: 9
744A: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-541-7999
Hand File Set

005417999
5110-00-541-7999: RNCC: 3 | RNVC: 2
60237849: RNCC: 5 | RNVC: 2
31.681: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-525-7217
Female Dimpling Die

005257217
42B8524-12: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-524-6942
Keyway Cutter

005246942
C-3600-832: RNCC: 3 | RNVC: 2
C-3600-832: RNCC: 5 | RNVC: 2
C-3600-832: RNCC: 5 | RNVC: 2
C-3600-832: RNCC: 5 | RNVC: 9
C-3576-8: RNCC: 5 | RNVC: 9
C-3600 8-32: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-518-3924
Boiler Tube Cutter

005183924
526900: RNCC: 3 | RNVC: 1

13 Aug 1974

5110-00-517-5579
Hand Reamer

005175579
5175579: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-501-6014
Nested Saws

005016014
5110-00-501-6014: RNCC: 3 | RNVC: 2
C33P: RNCC: 5 | RNVC: 2
65975: RNCC: 5 | RNVC: 2
101: RNCC: 5 | RNVC: 9
TNL-101: RNCC: 5 | RNVC: 9
92C: RNCC: 5 | RNVC: 9
175C: RNCC: 5 | RNVC: 9

6 Jul 1974

5110-00-472-2343
Hand Wire Stripper

004722343
B107.500: RNCC: 3 | RNVC: 1
NO-NIK: RNCC: 5 | RNVC: 1
B107.500 CAT 37 TY2CL1: RNCC: 5 | RNVC: 1
7904445-02: RNCC: 5 | RNVC: 2
118-810: RNCC: 5 | RNVC: 2
NN014: RNCC: 5 | RNVC: 2
NO-NIK: RNCC: 5 | RNVC: 9
B107.37: RNCC: 5 | RNVC: 9
B107.37 TY2CL1: RNCC: 5 | RNVC: 9
NN014: RNCC: 5 | RNVC: 9

14 Jun 1974

5110-00-440-7996
Reamer Blade

004407996
5110-00-440-7996: RNCC: 3 | RNVC: 2
99-38 COOPER/XCELITE: RNCC: 5 | RNVC: 2
272SC222: RNCC: 5 | RNVC: 2
TMT-99-38: RNCC: 5 | RNVC: 2
127-691: RNCC: 5 | RNVC: 2
108X210: RNCC: 5 | RNVC: 2
99-38: RNCC: 5 | RNVC: 2
99-38: RNCC: 5 | RNVC: 9
3-685: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-433-5648
Hand Operated Cable Cutter

004335648
216-01863-1: RNCC: 3 | RNVC: 2
TS586-117: RNCC: 5 | RNVC: 9

7 Aug 1970

5110-00-299-7071
Scraper

002997071
11404: RNCC: 3 | RNVC: 2
SP411-2: RNCC: 5 | RNVC: 9

26 Sep 1973

5110-00-288-8722
Circle Cutter

002888722
PD5110-00-288-8722: RNCC: 3 | RNVC: 2
GGG-C-00748: RNCC: 5 | RNVC: 9
GGG-C-00748 TY3STB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-260-1647
Hand Reamer

002601647
B94.2: RNCC: 3 | RNVC: 1
21249: RNCC: 5 | RNVC: 2
712-046416: RNCC: 5 | RNVC: 2
C24542: RNCC: 5 | RNVC: 2
101-0-0.6875: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
A-A-2928: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-245-4177
Hand File

002454177
A-A-2442: RNCC: 4 | RNVC: 1
WM6.25RHNR2: RNCC: 5 | RNVC: 1
37786: RNCC: 5 | RNVC: 2
31.593: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL1: RNCC: 5 | RNVC: 9
37786: RNCC: 5 | RNVC: 9
GNH162: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-245-4165
Hand File

002454165
A-A-2453: RNCC: 4 | RNVC: 1
WM6.25RHNM2: RNCC: 5 | RNVC: 1
31.574: RNCC: 5 | RNVC: 2
38094: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
38094: RNCC: 5 | RNVC: 9
GNE162: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL12: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-243-7965
Hand File

002437965
A-A-2316: RNCC: 4 | RNVC: 1
08416: RNCC: 5 | RNVC: 2
08416: RNCC: 5 | RNVC: 9
GGG-F-325 TY13CL2STC: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-243-1525
Jointer Plane

002431525
5110-00-243-1525: RNCC: 3 | RNVC: 2
GGG-P-436: RNCC: 5 | RNVC: 9
MS16390-4: RNCC: 5 | RNVC: 9
GGG-P-436 TY6CLDSZ22: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-242-7147
One Man Crosscut Saw

002427147
PD5110-00-242-7147: RNCC: 3 | RNVC: 2
GGG-S-64 TY1STB: RNCC: 5 | RNVC: 9
GGG-S-64: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-242-0146
Hand File

002420146
A-A-2445: RNCC: 4 | RNVC: 1
WM6.25RHNCRG2: RNCC: 5 | RNVC: 1
37870: RNCC: 5 | RNVC: 2
31.491: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL4: RNCC: 5 | RNVC: 9
MS15646: RNCC: 5 | RNVC: 9
37870: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-241-9160
Hand File

002419160
A-A-2322: RNCC: 4 | RNVC: 1
41F1572: RNCC: 5 | RNVC: 2
15991: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
15991: RNCC: 5 | RNVC: 9
GGG-F-325 TY19STC: RNCC: 5 | RNVC: 9
10424478: RNCC: 6 | RNVC: 9

1 Jan 1963

5110-00-241-9151
Hand File

002419151
A-A-2312: RNCC: 4 | RNVC: 1
NIC 04927N: RNCC: 5 | RNVC: 2
41F941: RNCC: 5 | RNVC: 2
04927: RNCC: 5 | RNVC: 2
1-210-08-2-0: RNCC: 5 | RNVC: 2
GGG-F-325 TY9STB: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
04927: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-240-6031
Chisel Bar

002406031
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL1: RNCC: 5 | RNVC: 1
G10-6031: RNCC: 5 | RNVC: 2
698: RNCC: 5 | RNVC: 2
B107.48: RNCC: 5 | RNVC: 9
B107.48 TY1CL1: RNCC: 5 | RNVC: 9
GGG-B-101 TY1: RNCC: 5 | RNVC: 9
GGG-B-101: RNCC: 5 | RNVC: 9
A-A-2562: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-7615
Hand File

002397615
A-A-2452: RNCC: 4 | RNVC: 1
38059: RNCC: 5 | RNVC: 2
80106: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
38059: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL11: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-7602
Hand File

002397602
A-A-2448: RNCC: 4 | RNVC: 1
37926: RNCC: 5 | RNVC: 2
WM6.25RHNS2: RNCC: 5 | RNVC: 2
31.622: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL7: RNCC: 5 | RNVC: 9
37926: RNCC: 5 | RNVC: 9
GNG162: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-7590
Hand File

002397590
5110-00-239-7590: RNCC: 3 | RNVC: 2
A-A-2444: RNCC: 5 | RNVC: 1
37954: RNCC: 5 | RNVC: 2
31.640: RNCC: 5 | RNVC: 2
WM6.25RHNTS2: RNCC: 5 | RNVC: 2
37954: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL3: RNCC: 5 | RNVC: 9
GNF162: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-3281
Hand File

002393281
A-A-2450: RNCC: 4 | RNVC: 1
WM6.25RHNJRE2: RNCC: 5 | RNVC: 2
31.544: RNCC: 5 | RNVC: 2
WM6.25RHNJRE2: RNCC: 5 | RNVC: 2
38038: RNCC: 5 | RNVC: 2
GGG-F-331 TY18CL9: RNCC: 5 | RNVC: 9
38038: RNCC: 5 | RNVC: 9
GNM160: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-234-6553
Hand File

002346553
A-A-2318: RNCC: 4 | RNVC: 1
11969: RNCC: 5 | RNVC: 2
11969: RNCC: 5 | RNVC: 2
0707 8006: RNCC: 5 | RNVC: 2
4233A26: RNCC: 5 | RNVC: 2
GGG-F-325 TY16CL1STC: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
11969: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-233-9110
Brick Chisel

002339110
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 50 TY1: RNCC: 5 | RNVC: 1
G10-9110: RNCC: 5 | RNVC: 2
35200: RNCC: 5 | RNVC: 2
437-0: RNCC: 5 | RNVC: 2
0342: RNCC: 5 | RNVC: 9
A-A-2880: RNCC: 5 | RNVC: 9
GGG-C-315: RNCC: 5 | RNVC: 9
B107.50: RNCC: 5 | RNVC: 9
B107.50 TY1: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-233-1549
Hand Reamer

002331549
T371364: RNCC: 3 | RNVC: 2

28 Oct 1970

5110-00-224-7058
Hand Operated Wire Rope Cutter

002247058
P1125: RNCC: 3 | RNVC: 2
A-A-3029: RNCC: 4 | RNVC: 1
A-A-3029 SZ2: RNCC: 5 | RNVC: 1
HC1-1-8: RNCC: 5 | RNVC: 2
P: RNCC: 5 | RNVC: 9
GGG-C-800: RNCC: 5 | RNVC: 9
P: RNCC: 5 | RNVC: 9
GGG-C-800 TY1CL1SZ2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-223-8827
Scraping Knife

002238827
5110-00-223-8827: RNCC: 3 | RNVC: 2
2350: RNCC: 5 | RNVC: 2
GGG-K-481: RNCC: 5 | RNVC: 9
GGG-K-481 TY5CL1: RNCC: 5 | RNVC: 9
5110PL0946060: RNCC: 6 | RNVC: 9

1 Jan 1963

5110-00-221-1083
Hand Metal Cutting Shears

002211083
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 16 TY1CL1STA: RNCC: 5 | RNVC: 1
B107.16 TY1CL1STA: RNCC: 5 | RNVC: 9
B107.16M TY1CL1STA: RNCC: 5 | RNVC: 9
B107.16M: RNCC: 5 | RNVC: 9
B107.16: RNCC: 5 | RNVC: 9
GGG-S-291: RNCC: 5 | RNVC: 9
06: RNCC: 5 | RNVC: 9
GGG-S-291 TY2CL1STA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-203-9432
Hand File

002039432
5110-00-203-9432: RNCC: 3 | RNVC: 2
GGG-F-325 TY13CL3: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
A-A-2316: RNCC: 5 | RNVC: 9
1-100-08-2-0: RNCC: C | RNVC: 1

1 Jan 1963

5110-00-199-7292
Hand Reamer

001997292
B94.2: RNCC: 3 | RNVC: 1
21257: RNCC: 5 | RNVC: 2
712-047315: RNCC: 5 | RNVC: 2
101-0-1.5000: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
103HS 1-1/2 IN.: RNCC: 5 | RNVC: 9
A-A-2928: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-188-0744
Hand Reamer

001880744
GGGR00180TYPE1CLASS1GRADEB: RNCC: 4 | RNVC: 1

1 Jan 1963

5110-00-186-6710
Hand Reamer

001866710
B94.2: RNCC: 3 | RNVC: 1
101-0-0.4844: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
103HS 31/64 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-176-0109
Replacement Element

001760109
L6637: RNCC: 3 | RNVC: 2

15 Dec 1971

5110-00-156-0065
Hand File

001560065
A-A-2446: RNCC: 4 | RNVC: 1
31.559: RNCC: 5 | RNVC: 2
WM6.25RHNM2: RNCC: 5 | RNVC: 2
GNL162: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL5: RNCC: 5 | RNVC: 9
MS15648-4: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-156-0062
Hand File

001560062
A-A-2451: RNCC: 4 | RNVC: 1
37982: RNCC: 5 | RNVC: 2
WM6.25RHNEQG2: RNCC: 5 | RNVC: 2
31.508: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL10: RNCC: 5 | RNVC: 9
37982: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-126-0804
Bench Wire Stripper

001260804
5110-00-126-0804: RNCC: 3 | RNVC: 2
45-1633: RNCC: 5 | RNVC: 2
91557033: RNCC: 5 | RNVC: 2
45-1633: RNCC: 5 | RNVC: 2

12 Feb 1975

5110-00-118-3263
Tube Cutter

001183263
D9872: RNCC: 3 | RNVC: 2

15 Jan 1973

5110-37-555-7738
Pipe Cutt 1/2-3"

375557738
PIPE CUTTING: RNCC: 5 | RNVC: 1

22 Mar 2004

5110-17-110-1765
M/Reservemes Koker

171101765
0500706: RNCC: 3 | RNVC: 2

22 May 1996

5110-15-186-0786
Filiera 7/16" 20 Fi

151860786
FIL7/16FILETTI20: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-165-3719
Lima Fresa 1/2 Dolc

151653719
2610210: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-186-0808
Maschio 3/8 24 File

151860808
MASCHIO3/8FIL24: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-161-8675
Lima Piatta 6 1/2 D

151618675
LIMA PIATTA 6 1/2 DOLCE NICHOLSO: RNCC: 3 | RNVC: 2

1 Oct 2000

5110-15-219-4638
Maschio Gas Cil.1/2

152194638
165T325 1/2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-165-3869
Contafiletti Pol/Me

151653869
3969G: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-219-5261
Lima 1/2 Tonda

152195261
S0172130000: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-209-4895
Tronchese Da 40/63

152094895
40/63: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-214-8606
Tagliatubi Diam.1/8

152148606
VBW1/8-2IN: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-4792
Lima Ago Quadra 1/2

152084792
3LPKQUAGMDN140: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-133-2739
Lima Tonda T 1/2 Do

151332739
2602-2-8: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-220-2117
Pinza A Crimpare C/

152202117
TTK080: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-214-9264
Lima 1/2 Tonda

152149264
1-210-08-3-3: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-214-8586
Lima Piatta 1/2 Dol

152148586
3LCNPNCNMDM200: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-219-1632
Lama 4' Attacco 1/4

152191632
SGDMRC4-TM4: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-209-4894
Tronchese Da 16/32

152094894
16/32: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-210-0948
Lima 1/2 Tonda Tagl

152100948
2601/2-4': RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-165-3694
Lima 1/2 Tonda

151653694
260136: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-4009
Tronchese Usag/Faco

151654009
429E: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-4072
Punzone 366/5-150

151654072
3665150: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-4070
Punzone 366/3-125

151654070
3663125: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-171-6523
Raspa 1/2 Tonda Dol

151716523
C94459250: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-192-5437
Tagliatubi Da 1/2 A

151925437
1/2-2: RNCC: 3 | RNVC: 2

26 Mar 2010

5110-15-210-6471
Spatola Acciaio C/M

152106471
54110: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-209-5484
Sparapunti 110/13

152095484
110/13: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-176-7030
Cutter C/Corpo Plas

151767030
4801770F: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-165-4010
Tronchese Usag/Faco

151654010
427E: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-208-4787
Lima Ago 1/2 Tonda

152084787
3LPKMZAGDDN140: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-165-4071
Punzone 366/4-150

151654071
3664150: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-171-6522
Raspa Cabinet 1/2 T

151716522
C9441030: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-210-1394
Testa Per Fresa 1/4

152101394
200.S: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-165-3696
Lima 1/2Tonda 8'T.B

151653696
260118: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-22-221-4795
3/4In Stemmejern

222214795
71-1131-19: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-15-124-9400
Lima Mezzo/Dolce Qu

151249400
990E: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-199-0996
Raspa/Lima

151990996
2656/0: RNCC: 3 | RNVC: 2
D2656/0: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-216-1199
Sponderuole 26/30

152161199
FBR26/30: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-186-2289
Scalpelo 3040/220

151862289
3040-220: RNCC: 3 | RNVC: 2

30 Dec 2008

Load More Results