What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 39 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 39of 112

5110-15-074-6154
Hand File

150746154
10-106BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-3281
Hand File

150743281
B250UNI5488B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-202-0456
Tube Cutter

332020456
7350000: RNCC: 3 | RNVC: 2

30 Dec 2002

5110-14-438-9611
Hand Reamer

144389611
330A97-2102-20: RNCC: 3 | RNVC: 2

11 Apr 1990

5110-14-244-0899
Hand Reamer

142440899
NF E 66-003/15,5: RNCC: 2 | RNVC: 2
8040101-15,5: RNCC: 3 | RNVC: 2
E66-003-15,5: RNCC: 5 | RNVC: 2
E74104-15-5FS: RNCC: 5 | RNVC: 2
TKF8040101-15,5: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-33-156-6036
Pocket Knife

331566036
8670.00850: RNCC: 3 | RNVC: 2
664.181: RNCC: 3 | RNVC: 2
850.200: RNCC: 3 | RNVC: 2

24 Jul 1995

5110-15-074-6670
Hand Reamer

150746670
30UNI532ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-180-2695
Hand File

151802695
1718A4/R: RNCC: 3 | RNVC: 2
(241)A08731718A4/R: RNCC: 3 | RNVC: 2

7 Apr 2008

5110-33-211-2798
Pliers

332112798
70107: RNCC: 3 | RNVC: 2

7 Aug 2013

5110-15-052-2437
Hand Reamer

150522437
64389-4: RNCC: 3 | RNVC: 2

15 Jun 1971

5110-15-074-5853
Hand File

150745853
D250UNI5494B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5870
Hand File

150745870
1-2D350UNI5489: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-3299
Hand File

150743299
D350UNI5488: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-103-9248
Hand Rasp

331039248
361.363: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-33-202-1160
Hand Wire Stripper

332021160
XB-052: RNCC: 3 | RNVC: 2

16 Jan 2003

5110-14-270-3938
Hand Reamer

142703938
E66011A14RN: RNCC: 2 | RNVC: 1
30-05-14: RNCC: 5 | RNVC: 9
1140-14: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-14-433-3149
Bearing Scraper

144333149
853-202-663-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5110-15-139-8074
Bolt Cutter

151398074
1004941: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-27-053-1748
Adz

270531748
6400 25 0600: RNCC: 2 | RNVC: 1

5 Apr 2011

5110-15-079-6449
Hand Reamer

150796449
21UNI525TAGLIENTIELICACCLEGUTEN-: RNCC: 2 | RNVC: 1

1 Jan 1974

5110-15-074-6376
Hand Reamer

150746376
6UNI525ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-103-9150
Hand Rasp

331039150
351.253: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-33-155-1293
Hand File

331551293
LIMA REDONDA SEMI-FINA 12": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-27-018-8533
Corner Bit Brace

270188533
901-DS-39: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-27-015-8890
Turning Chisel

270158890
99999-NIIN-DA0030041: RNCC: 2 | RNVC: 1

17 Dec 2002

5110-15-074-6279
Hand Reamer

150746279
23UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-019-5144
Hand Drill

270195144
07002YU0013: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-274-8029
Ship Scraper

142748029
14-41-3FACES: RNCC: 2 | RNVC: 2
9119: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-33-155-1121
Hand File

331551121
LIMA PLANA PUNTA S/FINA 12": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-15-196-6811
Hand Reamer

151966811
PN UAS 00038636: RNCC: 3 | RNVC: 2
3416F76032717: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-27-018-5781
Bolt Cutter

270185781
5110-03072-00005: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-230-4104
Hand Reamer

152304104
616/1-109: RNCC: 3 | RNVC: 2
513315E074534: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-125-5377
End Cutting Nippers

151255377
2669P180: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-201-0475
Hand Reamer

142010475
R607-26X32: RNCC: 3 | RNVC: 2
3090-26-32: RNCC: 5 | RNVC: 2
1-14-26A32: RNCC: 5 | RNVC: 9
30-01-26A32: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-383-8665
Hand Reamer

143838665
E74112-38-5RS: RNCC: 2 | RNVC: 2
F-P-38,5: RNCC: 3 | RNVC: 2
F-P-38-5: RNCC: 3 | RNVC: 2
164-38-5: RNCC: 3 | RNVC: 2

11 Apr 1983

5110-14-438-9580
Hand Reamer

144389580
330A97-2102-24: RNCC: 3 | RNVC: 2

11 Apr 1990

5110-33-211-4086
Pliers

332114086
70532: RNCC: 3 | RNVC: 2

23 Oct 2013

5110-15-074-5956
Hand File

150745956
61-2D140UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-407-9861
Hand Cold Chisel

144079861
M4Z7101952621: RNCC: 3 | RNVC: 2

19 Mar 1986

5110-14-553-5721
Hand Cold Chisel

145535721
263.G20: RNCC: 3 | RNVC: 2
3148511616413: RNCC: 5 | RNVC: 2

18 Apr 2007

5110-33-203-0890
Chisel Bar

332030890
93998820020: RNCC: 3 | RNVC: 2
93998820020: RNCC: 5 | RNVC: 2
93998820020: RNCC: 5 | RNVC: 9

29 Jan 2004

5110-15-074-6459
Hand Reamer

150746459
35UNI525TAGLIENTIELICACCLEGUTEN-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-14-378-2680
Bolt Cutter

143782680
188N-0: RNCC: 3 | RNVC: 2
188N0: RNCC: 3 | RNVC: 2
3272670240865: RNCC: 5 | RNVC: 2

20 Jul 1982

5110-15-197-2083
Paper Cutter

151972083
PN UAS 00015191: RNCC: 3 | RNVC: 2
3610F76012043: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-33-105-8799
Hand File

331058799
405002: RNCC: 3 | RNVC: 2

21 Nov 1997

5110-15-124-1189
Pipe Cutter

151241189
2418-4-32: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-383-8656
Hand Reamer

143838656
E74112-21-5RS: RNCC: 2 | RNVC: 2
F-P-21-5: RNCC: 3 | RNVC: 2
164-21-5: RNCC: 3 | RNVC: 2

11 Apr 1983

5110-15-054-2629
Rabbet Plane

150542629
56-3-530-18: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-426-2226
Hand Hacksaw Blade

144262226
ULTRARECORD300X13X0,65-10D/24T: RNCC: 3 | RNVC: 9

9 Aug 1988

5110-15-074-7063
Firmer Gouge

150747063
28ART113: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-220-8460
Hand Cold Chisel

142208460
BB6-250: RNCC: 3 | RNVC: 9

1 Jan 1965

5110-15-074-6387
Hand Reamer

150746387
17UNI525ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-103-9112
Hand File

331039112
905.00630: RNCC: 3 | RNVC: 2
350.433: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-15-155-6078
Hand Cold Chisel

151556078
(241)A5682SCA.P.150X22: RNCC: 3 | RNVC: 2
SCA.P. 150X22: RNCC: 3 | RNVC: 2

30 Apr 2002

5110-15-074-5968
Hand File

150745968
71-2D140UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-052-4059
Hand Rasp

150524059
350UNI5526: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-539-8277
Knife Blade

145398277
MC2000-44: RNCC: 3 | RNVC: 2

11 Feb 2004

5110-15-199-0938
Hand Reamer

151990938
7730-22: RNCC: 3 | RNVC: 2
F7730-22: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-074-6026
Hand File

150746026
225UNI5518: RNCC: 2 | RNVC: 2

1 Jan 1994

5110-15-159-3193
Ladies' Scissors

151593193
PN UAS 00038820: RNCC: 3 | RNVC: 2
5110F76032828: RNCC: 5 | RNVC: 9

31 Mar 2004

5110-15-074-6243
Hand Rasp

150746243
1-2D300UNI5525: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-274-9106
Hand Wire Stripper

142749106
521001-00: RNCC: 3 | RNVC: 2
SW1: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-15-199-0942
Hand Reamer

151990942
7730-18: RNCC: 3 | RNVC: 2
F7730-18: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-27-047-9606
Hand Cold Chisel

270479606
3700165140: RNCC: 3 | RNVC: 2

24 Dec 2009

5110-15-074-6318
Hand Reamer

150746318
24UNI525ACCLEGUTENS: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-383-8661
Hand Reamer

143838661
E74112-30-5RS: RNCC: 2 | RNVC: 2
F-P-30-5: RNCC: 3 | RNVC: 2
164-30-5: RNCC: 3 | RNVC: 2
F-P-30,5: RNCC: 3 | RNVC: 2

11 Apr 1983

5110-14-254-7319
Hand Reamer

142547319
NF E 66-003/27,5: RNCC: 2 | RNVC: 2
8040101-27,5: RNCC: 3 | RNVC: 2
E66-003-27,5: RNCC: 5 | RNVC: 2
E74104-27-5FS: RNCC: 5 | RNVC: 2
TKF8040101-27,5: RNCC: 5 | RNVC: 9

1 Jan 1969

5110-14-271-5911
Hand Reamer

142715911
E74111-10-5RS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-14-308-9305
Bolt Cutter Jaws

143089305
151-0: RNCC: 3 | RNVC: 2
3272670259973: RNCC: 5 | RNVC: 2

1 Jan 1974

5110-15-054-2625
Crosscut Hand Saw

150542625
4700-250: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-054-1406
Hand Hacksaw Blade

150541406
51-5-400-22: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-27-015-8798
Turning Chisel

270158798
99999-NIIN-DA0037508: RNCC: 2 | RNVC: 1

17 Dec 2002

5110-15-074-6861
Hand Cape Chisel

150746861
125-5ART3616CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-156-5806
Hand Hacksaw Blade

331565806
803.01: RNCC: 3 | RNVC: 2
426.018: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-074-5904
Hand File

150745904
D400UNI5492B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-104-9641
End Cutting Nippers

151049641
2/20671-13.03.73-AA: RNCC: 3 | RNVC: 2

30 May 1989

5110-33-103-9149
Hand Rasp

331039149
351.252: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-440-0813
Smooth Plane

144400813
112033: RNCC: 3 | RNVC: 2

11 Jul 1990

5110-15-074-5854
Hand File

150745854
D300UNI5494: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-276-3212
Hand Reamer

142763212
E74112-12RS: RNCC: 2 | RNVC: 2
F-P-12: RNCC: 3 | RNVC: 2
164-12: RNCC: 3 | RNVC: 2
FP12: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-15-196-0648
Chisel Bar

151960648
PN UAS 00018323: RNCC: 3 | RNVC: 2
5110F76026263: RNCC: 5 | RNVC: 9

31 Mar 2004

5110-14-541-3235
Hand Cold Chisel

145413235
263.P30: RNCC: 3 | RNVC: 2
263P-30: RNCC: 5 | RNVC: 2
263-P30: RNCC: 5 | RNVC: 2

27 May 2004

5110-14-417-3050
Rip Hand Saw

144173050
NO PRIMARY REF14-417-3050: RNCC: 3 | RNVC: 2
C314-50E: RNCC: 5 | RNVC: 9

1 Jul 1987

5110-15-074-6126
Hand File

150746126
14-104BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-101-2177
Hand File

151012177
7425: RNCC: 3 | RNVC: 2

15 May 1987

5110-33-156-5809
Hand Hacksaw Blade

331565809
427.018: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-074-5825
Hand File

150745825
D100UNI5493B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-218-4257
Hand File

142184257
E75001LE300A: RNCC: 2 | RNVC: 2
912-300B: RNCC: 3 | RNVC: 2
0912300104: RNCC: 3 | RNVC: 2
0912300101: RNCC: 3 | RNVC: 2
112-BAT-300: RNCC: 3 | RNVC: 2
E75-001TRIANGULAIREBATARDE300: RNCC: 5 | RNVC: 2

1 Jan 1965

5110-14-383-8655
Hand Reamer

143838655
E74112-19-5RS: RNCC: 2 | RNVC: 2
F-P-19,5: RNCC: 3 | RNVC: 2
F-P-19-5: RNCC: 3 | RNVC: 2
164-19-5: RNCC: 3 | RNVC: 2

11 Apr 1983

5110-14-220-8459
Hand Cold Chisel

142208459
BB5-200: RNCC: 3 | RNVC: 9

1 Jan 1965

5110-27-058-6147
Bolt Cutter

270586147
2350 27 0024: RNCC: 2 | RNVC: 1

26 Feb 2013

5110-14-244-0905
Hand Reamer

142440905
NF E 66-003/25,5: RNCC: 2 | RNVC: 2
8040101-25,5: RNCC: 3 | RNVC: 2
E66-003-25,5: RNCC: 5 | RNVC: 2
E74104-25-5FS: RNCC: 5 | RNVC: 2
TKF8040101-25,5: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-27-047-8289
Jointer Plane

270478289
1-12-205: RNCC: 2 | RNVC: 1

18 Dec 2009

5110-14-210-5438
Hand File

142105438
NO PRIMARY REF14-210-5438: RNCC: 3 | RNVC: 2
0UTF42: RNCC: 5 | RNVC: 2
LIMEAIGUILLE140PLATEAMAIN3: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-14-270-3924
Hand Reamer

142703924
E66011A2-5RN: RNCC: 2 | RNVC: 2
30-05-2-5: RNCC: 5 | RNVC: 9
1140-2-5: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-15-074-6913
Firmer Chisel

150746913
20ART106: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-549-4461
Hand File

145494461
AIG.PDE180T2: RNCC: 3 | RNVC: 2

5 Apr 2006

5110-14-468-9712
Single Bit Ax

144689712
117073: RNCC: 3 | RNVC: 2

30 Mar 1994

5110-33-204-4938
Chisel Bar

332044938
961-22X1250MM: RNCC: 3 | RNVC: 2
CF-33P425554: RNCC: 5 | RNVC: 2
9510-33-P42-5554: RNCC: 6 | RNVC: 9

26 Sep 2005

5110-15-074-9032
Hand Reamer

150749032
35UNI525ACCSUPER: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-540-8535
Firmer Chisel

145408535
7011220201: RNCC: 3 | RNVC: 2
3303807011192: RNCC: 5 | RNVC: 2

23 Apr 2004

5110-14-271-5937
Hand Reamer

142715937
E74111-18FS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-113-4750
Scraper Blade

151134750
8294269: RNCC: 3 | RNVC: 2

30 May 1989

5110-15-074-9030
Hand Reamer

150749030
32UNI525ACCSUPER: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-047-4905
Hand Drill

270474905
6270DWPLE: RNCC: 2 | RNVC: 1

4 Dec 2009

5110-15-074-6447
Hand Reamer

150746447
19UNI525TAGLIENTIELICACCLEGUTEN-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-14-327-8699
Rivet Cutter

143278699
AT501R: RNCC: 3 | RNVC: 2
AT501R: RNCC: 5 | RNVC: 2
AT501R: RNCC: 5 | RNVC: 9
85-687-6839: RNCC: 6 | RNVC: 9

2 Jul 1975

5110-14-446-5646
File Handle

144465646
4: RNCC: 3 | RNVC: 2

26 Mar 1991

5110-15-074-6630
Hand Reamer

150746630
25UNI532ACCIAI0CARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-378-2679
Bolt Cutter

143782679
158N2: RNCC: 3 | RNVC: 2
158N-2: RNCC: 3 | RNVC: 2
3272670210479: RNCC: 5 | RNVC: 2

20 Jul 1982

5110-27-053-1745
Hand Cold Chisel

270531745
5500 23 0150: RNCC: 2 | RNVC: 1

5 Apr 2011

5110-15-074-3270
Hand File

150743270
D100UNI5487B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-197-1705
Poising Saw

151971705
PN UAS 00018335: RNCC: 3 | RNVC: 2
5130F76018178: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-197-5770
Saw Handle

151975770
PN UAS 00038656: RNCC: 3 | RNVC: 2
5120F76032737: RNCC: 5 | RNVC: 9

8 Apr 2004

5110-15-062-5549
Circle Cutter

150625549
3691-400: RNCC: 3 | RNVC: 2

31 May 1981

5110-14-276-3216
Hand Reamer

142763216
E74112-20RS: RNCC: 2 | RNVC: 2
164-20: RNCC: 3 | RNVC: 2
F-P-20: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-15-203-6852
Hand File Set

152036852
09900404: RNCC: 3 | RNVC: 2

24 Jun 2011

5110-14-276-3224
Hand Reamer

142763224
E74112-42RS: RNCC: 2 | RNVC: 2
F-P-42: RNCC: 3 | RNVC: 2
164-4,2: RNCC: 3 | RNVC: 2
164-42: RNCC: 3 | RNVC: 2
F-P-4,2: RNCC: 3 | RNVC: 2
FP4-2: RNCC: 5 | RNVC: 2
E74112-4-2RS: RNCC: 5 | RNVC: 2
164-4-2: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-15-009-8716
Blacksmith's Chisel

150098716
3602/0/150: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-33-106-1181
Hand File

331061181
BL4006 8F: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-15-173-6285
Bearing Scraper

151736285
987C150: RNCC: 1 | RNVC: 2
987C-150: RNCC: 3 | RNVC: 2

1 Jun 2003

5110-15-197-2084
Paper Cutter

151972084
PN UAS 00031248: RNCC: 3 | RNVC: 2
3610F76027822: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-425-6013
Hand File

144256013
DRD.B300: RNCC: 3 | RNVC: 2
0714 61 36: RNCC: 5 | RNVC: 2
3148516020406: RNCC: 5 | RNVC: 2
0602040: RNCC: 5 | RNVC: 9

12 Jul 1988

5110-33-201-6697
Bolt Cutter

332016697
6009-1050: RNCC: 3 | RNVC: 2

27 Sep 2002

5110-15-120-9076
Hand File

151209076
STD/04.047: RNCC: 3 | RNVC: 2

4 Sep 1995

5110-14-270-3935
Hand Reamer

142703935
E66011A10RN: RNCC: 2 | RNVC: 2
1AH16032: RNCC: 3 | RNVC: 2
D7601.100: RNCC: 3 | RNVC: 2
8040061-10: RNCC: 3 | RNVC: 2
703CO10: RNCC: 3 | RNVC: 2
SYQ1951: RNCC: 5 | RNVC: 2
30-05-10: RNCC: 5 | RNVC: 9
1140-10: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-14-201-0479
Hand File

142010479
NO PRIMARY REF14-201-0479: RNCC: 3 | RNVC: 2
2308: RNCC: 5 | RNVC: 9
41LIM067-0: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-273-7477
Hand Reamer

142737477
E74103-19RS: RNCC: 2 | RNVC: 2
R603-19: RNCC: 3 | RNVC: 2
D6600.190: RNCC: 3 | RNVC: 2
8040021-19: RNCC: 3 | RNVC: 2
703CY19: RNCC: 3 | RNVC: 2
SYQ1802: RNCC: 5 | RNVC: 2
166-19: RNCC: 5 | RNVC: 2
F1111-19: RNCC: 5 | RNVC: 2
1080-19: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-378-2677
Bolt Cutter

143782677
158N-0: RNCC: 3 | RNVC: 2
158N0: RNCC: 3 | RNVC: 2
3272670281219: RNCC: 5 | RNVC: 2

20 Jul 1982

5110-14-379-1238
Hand Reamer

143791238
14231-42480: RNCC: 3 | RNVC: 2

6 Sep 1982

5110-15-204-6859
Poising Saw

152046859
4329: RNCC: 3 | RNVC: 2
(241)AA7854329: RNCC: 5 | RNVC: 2

9 Dec 2011

5110-15-074-6575
Hand Reamer

150746575
2-5UNI524ACCIAI0LEGAT0DAUTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-471-9906
Hand File

144719906
RD.MD300: RNCC: 3 | RNVC: 2
RD.MD 300: RNCC: 5 | RNVC: 2
RDMD300: RNCC: 5 | RNVC: 2
0714 61 52: RNCC: 5 | RNVC: 2
3148516041203: RNCC: 5 | RNVC: 2
0604120: RNCC: 5 | RNVC: 9

28 Sep 1994

5110-15-074-7030
Turning Chisel

150747030
30ART102CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-155-1099
Hand File

331551099
LIMA CUADRADA BASTA 12": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-14-213-5594
Hand File

142135594
E75001LA150A: RNCC: 2 | RNVC: 2
0900150101: RNCC: 3 | RNVC: 2
900-150B: RNCC: 3 | RNVC: 2
0900150104: RNCC: 3 | RNVC: 2
101-BA-150: RNCC: 3 | RNVC: 2
101BATARDE150: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-14-449-0830
Hand File

144490830
510-00-180: RNCC: 3 | RNVC: 2

24 Jul 1991

5110-14-540-5471
Smooth Plane

145405471
1-12-116: RNCC: 3 | RNVC: 2
0076174121162: RNCC: 5 | RNVC: 2

1 Apr 2004

5110-15-074-6512
Hand Reamer

150746512
8UNI525TAGLIENTIELICACCSUPERRAP-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-6271
Hand Reamer

150746271
15UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-022-3642
Turning Chisel

270223642
10131MK1412: RNCC: 2 | RNVC: 1

27 Feb 2004

5110-15-063-3904
Hand File

150633904
24-186: RNCC: 3 | RNVC: 2

7 Oct 1982

5110-14-242-2395
Hand Cold Chisel

142422395
NO PRIMARY REF14-242-2395: RNCC: 3 | RNVC: 2
F281-22: RNCC: 5 | RNVC: 9

1 Jan 1967

5110-14-271-5926
Hand Reamer

142715926
E74111-4FS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-228-9948
Hand Reamer

142289948
E74104-9RN: RNCC: 2 | RNVC: 2
3088-9: RNCC: 3 | RNVC: 9

1 Jan 1966

5110-14-254-2330
Hand Wire Stripper

142542330
5208-16BO: RNCC: 3 | RNVC: 2
7239: RNCC: 3 | RNVC: 2
7239: RNCC: 3 | RNVC: 2
241-12: RNCC: 3 | RNVC: 2
66: RNCC: 3 | RNVC: 2
3272670247581: RNCC: 5 | RNVC: 2
206: RNCC: 5 | RNVC: 2
1515: RNCC: 5 | RNVC: 9
7239: RNCC: 5 | RNVC: 9

1 Jan 1969

5110-15-055-3618
Hand File

150553618
B225UNI5489B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-438-9577
Hand Reamer

144389577
330A97-2102-21: RNCC: 3 | RNVC: 2

11 Apr 1990

5110-15-074-6052
Hand File

150746052
300UNI5503: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-540-7895
Hand Rasp

145407895
RAPEMV: RNCC: 3 | RNVC: 2
RAPEMY: RNCC: 5 | RNVC: 9

23 Apr 2004

5110-15-064-8034
Hand File Set

150648034
192-0686/01: RNCC: 3 | RNVC: 2

1 Mar 1983

5110-27-038-6067
Hand Drill

270386067
MATKAP-SARJLI: RNCC: 2 | RNVC: 1

22 Oct 2007

5110-14-201-5374
Single Bit Ax

142015374
NO PRIMARY REF14-201-5374: RNCC: 3 | RNVC: 2
B0I2-310D: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-15-194-5071
Hand Wire Stripper

151945071
3140CT-AC106: RNCC: 3 | RNVC: 2
(241)AH8253140CT-AC106: RNCC: 5 | RNVC: 2

29 Nov 2010

5110-14-210-5430
Hand Rasp

142105430
E75001RB200B: RNCC: 2 | RNVC: 2
302M0YENNEPIQURE200: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-14-207-7364
Hand Hacksaw Blade

142077364
E73-072-500-1,8-6D/14T ACIER HSS: RNCC: 2 | RNVC: 2
ULTRASUPERRAPIDE500-6: RNCC: 3 | RNVC: 9
E73-071-500X16X0-80-6ACIERRAPID-: RNCC: 5 | RNVC: 1
DEMULTRASUPERRAPIDE500-6: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-15-074-6157
Hand File

150746157
16-106BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-449-0826
Hand Rasp

144490826
0940250204: RNCC: 3 | RNVC: 2
301-MP-250: RNCC: 3 | RNVC: 2

24 Jul 1991

5110-14-411-4897
Hand Cape Chisel

144114897
4-250: RNCC: 3 | RNVC: 2
3272670223370: RNCC: 5 | RNVC: 2

6 Aug 1986

5110-14-378-2678
Bolt Cutter

143782678
158N-1: RNCC: 3 | RNVC: 2
158N1: RNCC: 3 | RNVC: 2
3272670289178: RNCC: 5 | RNVC: 2
160-1: RNCC: 5 | RNVC: 9

20 Jul 1982

5110-15-054-4819
Hand Hacksaw Blade

150544819
2501G: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-274-8082
Hand File

142748082
2407-180-0: RNCC: 3 | RNVC: 2
507-00-180: RNCC: 3 | RNVC: 2
685-180-0: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-14-271-5933
Hand Reamer

142715933
E74111-11FS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-437-7137
Hand Reamer

144377137
E74112-49-5RS: RNCC: 2 | RNVC: 2

14 Feb 1990

5110-14-210-5456
Hand File

142105456
E75001LM150C: RNCC: 2 | RNVC: 2
201D0UCE150: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-15-236-8894
Pipe Cutter

152368894
TATUS710: RNCC: 3 | RNVC: 2
32112989-415: RNCC: 3 | RNVC: 2
511015E052146: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-074-7028
Turning Chisel

150747028
16ART102CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-517-1041
Hand Reamer

145171041
1-12138-99-0068CREP01: RNCC: 3 | RNVC: 2

4 Nov 1999

5110-15-214-7074
Pipe Cutter

152147074
5110RN0402000: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-546-9148
Broad Hatchet

145469148
073535: RNCC: 3 | RNVC: 2

7 Sep 2005

5110-14-271-5904
Hand Reamer

142715904
E74111-45RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-199-0943
Hand Reamer

151990943
7730-17: RNCC: 3 | RNVC: 2
F7730-17: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-204-8347
Hand File

142048347
E75001LA250A: RNCC: 2 | RNVC: 2
0900250101: RNCC: 3 | RNVC: 2
900-250B: RNCC: 3 | RNVC: 2
0900250104: RNCC: 3 | RNVC: 2
101-BA-250: RNCC: 3 | RNVC: 2
0714 61 02: RNCC: 5 | RNVC: 2
101BATARDE250: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-14-200-6702
Hand File

142006702
E75001LZ250B: RNCC: 2 | RNVC: 2

1 Jan 1962

5110-15-074-9041
Hand Reamer

150749041
50UNI525ACCSUPER: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6298
Hand Reamer

150746298
4UNI525ACCLEGUTENS: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6736
Hand Reamer

150746736
26UNI538ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-446-5650
File Handle

144465650
6: RNCC: 3 | RNVC: 2

26 Mar 1991

5110-15-074-6875
Hand Cold Chisel

150746875
165-16ART362: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-054-2497
Hand Bench Shears

150542497
2062-8: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-475-8875
Tailor's Shears

144758875
841.9: RNCC: 3 | RNVC: 2
3148512069560: RNCC: 5 | RNVC: 2
18509511-3: RNCC: 5 | RNVC: 2
0206956: RNCC: 5 | RNVC: 9

10 May 1995

5110-15-074-7062
Firmer Gouge

150747062
26ART113: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6296
Hand Reamer

150746296
50UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-205-6590
Pocket Knife

332056590
3621760: RNCC: 3 | RNVC: 2
00.21.27.90: RNCC: 5 | RNVC: 2

9 Feb 2007

5110-33-103-9137
Hand Rasp

331039137
351.131: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-14-456-0093
Hand Wire Stripper

144560093
414106: RNCC: 3 | RNVC: 2
5011DK26: RNCC: 3 | RNVC: 2
85-694-5819: RNCC: 6 | RNVC: 9

11 Jun 1992

5110-14-244-0698
Hand Reamer

142440698
NF E 74-112/8,7: RNCC: 2 | RNVC: 2
8040011-8,7: RNCC: 3 | RNVC: 2
E74112-8,7: RNCC: 5 | RNVC: 2
TKF8040011-8,7: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-14-371-0451
Hand Reamer

143710451
E74112-13-5RS: RNCC: 2 | RNVC: 2
164-13-5: RNCC: 3 | RNVC: 2
F-P-13-5: RNCC: 3 | RNVC: 2

5 Jun 1981

5110-15-154-4941
Bolt Cutter

151544941
A1001941: RNCC: 3 | RNVC: 2

20 Jun 2001

5110-14-431-7297
Hand File

144317297
242-L200: RNCC: 3 | RNVC: 2

9 May 1989

5110-33-005-4223
Hand File

330054223
350.551: RNCC: 3 | RNVC: 2

23 Jul 2001

5110-15-074-7048
Firmer Gouge

150747048
35ART112: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-054-1378
Rip Hand Saw

150541378
01355-600: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-271-6035
Hand File

142716035
E75001LF350C: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-27-000-8011
Hand Cold Chisel

270008011
5500400200: RNCC: 2 | RNVC: 1
5500 40 0200: RNCC: 2 | RNVC: 1
5500 40 0200: RNCC: 3 | RNVC: 2
5500 40 0200: RNCC: 5 | RNVC: 1

23 Oct 1990

5110-15-074-6574
Hand Reamer

150746574
2UNI524ACCIAI0LEGAT0DAUTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-514-7627
Bolt Cutter

145147627
0217405: RNCC: 3 | RNVC: 2

16 Jun 1999

5110-27-022-3618
Turning Chisel

270223618
10131MK1411: RNCC: 2 | RNVC: 1

27 Feb 2004

5110-14-457-2999
Hand Wire Stripper

144572999
220-28: RNCC: 3 | RNVC: 2
3272670215979: RNCC: 5 | RNVC: 2

25 Aug 1992

5110-15-074-6273
Hand Reamer

150746273
17UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-054-2496
Hand Bench Shears

150542496
2062-6: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-276-3207
Hand Reamer

142763207
E74112-7RS: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-14-294-0782
Hand Hacksaw Frame

142940782
601: RNCC: 3 | RNVC: 2
3148511882856: RNCC: 5 | RNVC: 2
190-5811: RNCC: 5 | RNVC: 2
FACOM601: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-14-273-7568
Hand Reamer

142737568
E74108-9RS: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-14-488-5305
Hand Reamer

144885305
E66003-7-3RS: RNCC: 2 | RNVC: 2
EXP-QC-TD-7,3: RNCC: 3 | RNVC: 2
168-7,3: RNCC: 3 | RNVC: 2
EXPQCTD7-3: RNCC: 5 | RNVC: 2
168-7-3: RNCC: 5 | RNVC: 2

15 May 1997

5110-14-201-7242
Hand Reamer

142017242
E74104-60RN: RNCC: 2 | RNVC: 2
3088-6: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-15-101-4069
Hand Drill

151014069
TR/M: RNCC: 3 | RNVC: 2

15 May 1987

5110-15-050-9084
Hand File

150509084
1-20250UNI5494B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-298-7823
Back Saw

142987823
NO PRIMARY REF14-298-7823: RNCC: 3 | RNVC: 2
269A25: RNCC: 5 | RNVC: 2
C269A25: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-14-512-0542
Hand File

145120542
DRD-200MM: RNCC: 3 | RNVC: 2
NO PRIMARY REF14-512-0542: RNCC: 3 | RNVC: 2
DRD200MM: RNCC: 5 | RNVC: 9

3 Feb 1999

5110-14-271-6143
Hand File

142716143
E75001LA350B: RNCC: 2 | RNVC: 2
0900350201: RNCC: 3 | RNVC: 2
0900350204: RNCC: 3 | RNVC: 2
101-MD-350: RNCC: 3 | RNVC: 2
900-350DD: RNCC: 3 | RNVC: 2
0714 61 09: RNCC: 5 | RNVC: 2
101DEMID0UCE350: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-33-103-9186
Hand File

331039186
352.842: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-33-103-9162
Hand Rasp

331039162
351.363: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-33-103-9063
Hand File

331039063
350.061: RNCC: 3 | RNVC: 2

21 Jun 1995

5110-27-016-2496
Adz

270162496
6401 24 0600: RNCC: 2 | RNVC: 1
DA0018119: RNCC: 2 | RNVC: 1

19 Dec 2002

5110-14-481-4149
Hand Hacksaw Blade

144814149
GS172: RNCC: 3 | RNVC: 2
304 900: RNCC: 3 | RNVC: 9

7 May 1996

5110-14-244-0929
Hand Reamer

142440929
E66012A7RS: RNCC: 2 | RNVC: 2

1 Jan 1968

5110-14-418-1690
Hand File

144181690
AIGPAMBR100T2: RNCC: 3 | RNVC: 2
3148516313102: RNCC: 5 | RNVC: 2

6 Aug 1987

5110-14-358-4689
Hand File Set

143584689
AS.6L140T2: RNCC: 3 | RNVC: 2
18509504-8: RNCC: 5 | RNVC: 2
3148516292308: RNCC: 5 | RNVC: 2
AS6L140T2: RNCC: 5 | RNVC: 2
0629230: RNCC: 5 | RNVC: 9

13 Aug 1979

5110-14-271-5931
Hand Reamer

142715931
E74111-9FS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-401-5209
Hand File

144015209
DRD.MD200: RNCC: 3 | RNVC: 2
3148516022202: RNCC: 5 | RNVC: 2
DRD MD200: RNCC: 5 | RNVC: 2
DRDMD200: RNCC: 5 | RNVC: 2
0714 61 38: RNCC: 5 | RNVC: 2
0602220: RNCC: 5 | RNVC: 9

13 Jun 1985

5110-33-108-3838
Pocket Knife

331083838
2861720: RNCC: 3 | RNVC: 2

28 Feb 2001

5110-15-199-0997
Hand Rasp

151990997
2657/1-10: RNCC: 3 | RNVC: 2
D2657/1-10: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-274-7989
Woodcarving Gouge

142747989
E73-201G0UGEBISEAUEXTERIEUR25: RNCC: 2 | RNVC: 2
867-2LI0NS25: RNCC: 5 | RNVC: 2
867-2LI0NS25: RNCC: 5 | RNVC: 9
C311E25: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-074-6965
Firmer Chisel

150746965
35ART108: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6590
Hand Reamer

150746590
3UNI524ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-300-1655
Bolt Cutter Jaws

143001655
0220920: RNCC: 3 | RNVC: 2
999.LR1: RNCC: 5 | RNVC: 2
999LR1: RNCC: 5 | RNVC: 2
888LR1: RNCC: 5 | RNVC: 2

1 Jan 1973

5110-33-103-9073
Hand File

331039073
350.113: RNCC: 3 | RNVC: 2

21 Jun 1995

5110-33-103-9127
Hand File

331039127
350.633: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-15-074-7065
Firmer Gouge

150747065
32ART113: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-7042
Firmer Gouge

150747042
22ART112: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-485-3976
Bolt Cutter Jaws

144853976
990.LA4: RNCC: 3 | RNVC: 2
3148512175056: RNCC: 5 | RNVC: 2
0217505: RNCC: 5 | RNVC: 9

23 Jan 1997

5110-33-103-9081
Hand File

331039081
900.01020: RNCC: 3 | RNVC: 2
350.162: RNCC: 3 | RNVC: 2

22 Jun 1995

5110-33-005-4412
Bolt Cutter

330054412
8970.27500: RNCC: 3 | RNVC: 2
297.208: RNCC: 3 | RNVC: 2

25 Jul 2001

5110-15-074-9037
Hand Reamer

150749037
44UNI525ACCSUPER: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-103-9257
Hand File

331039257
362.712: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-273-7489
Hand Reamer

142737489
E74103-34RS: RNCC: 2 | RNVC: 2
1080-34: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-009-8654
Hand Drill

150098654
1160: RNCC: 3 | RNVC: 2

1 Mar 1981

5110-14-311-7720
Hand Cold Chisel

143117720
263.18: RNCC: 3 | RNVC: 2
91300143: RNCC: 5 | RNVC: 2
263-18: RNCC: 5 | RNVC: 2
3148511615201: RNCC: 5 | RNVC: 2
91300143: RNCC: 5 | RNVC: 2
0714 63 03: RNCC: 5 | RNVC: 2
0161520: RNCC: 5 | RNVC: 9

1 Jan 1974

5110-14-383-8669
Hand Reamer

143838669
E74112-43RS: RNCC: 2 | RNVC: 2
F-P-43: RNCC: 3 | RNVC: 2
164-43: RNCC: 3 | RNVC: 2

11 Apr 1983

5110-15-074-6699
Hand Reamer

150746699
23-45UNI535ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-103-9168
Hand Rasp

331039168
351.461: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-33-103-9206
Hand File

331039206
360.112: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-196-9858
Hand File

151969858
PN UAS 00025890: RNCC: 3 | RNVC: 2
5120F76021096: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-074-6006
Hand File

150746006
140UNI5516: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-052-4850
Breast Drill

150524850
53-1-35632: RNCC: 5 | RNVC: 9

31 Dec 1975

5110-14-226-1598
Pocket Knife

142261598
NT62DEC63: RNCC: 2 | RNVC: 2

1 Jan 1966

5110-33-155-9808
Pocket Knife

331559808
850.370/1: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-15-074-6283
Hand Reamer

150746283
28UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-103-9180
Hand File

331039180
352.732: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-33-103-9234
Hand File

331039234
360.661: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-530-2031
Hand File

145302031
RD.B250: RNCC: 3 | RNVC: 2
3148516038500: RNCC: 5 | RNVC: 2

22 May 2002

5110-14-546-7463
Paper Cutter

145467463
997 048 000 000: RNCC: 3 | RNVC: 2

11 Aug 2005

5110-33-205-4579
Pocket Knife

332054579
5361880: RNCC: 3 | RNVC: 2
00.21.15.78: RNCC: 5 | RNVC: 2

17 Oct 2006

5110-15-126-9947
Paper Cutter

151269947
T2GS21: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-074-6274
Hand Reamer

150746274
18UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-155-1110
Hand File

331551110
LIMA MEDIA CANA FINA 14": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-14-446-5652
File Handle

144465652
7: RNCC: 3 | RNVC: 2

26 Mar 1991

5110-14-294-0783
Bolt Cutter

142940783
888R4: RNCC: 3 | RNVC: 2
150-4: RNCC: 5 | RNVC: 2

1 Jan 1973

5110-15-068-3942
Hand Reamer

150683942
12000-29: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-15-074-6514
Hand Reamer

150746514
10UNI525TAGLIENTIELICACCSUPERRA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-6571
Hand Reamer

150746571
0-8UNI524ACCIAI0LEGAT0DAUTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-065-9710
Hand File

150659710
62321-35/013: RNCC: 3 | RNVC: 2

8 Aug 1985

5110-14-274-7987
Woodcarving Gouge

142747987
E73-201G0UGEBISEAUEXTERIEUR15: RNCC: 2 | RNVC: 2
867-2LI0NS15: RNCC: 5 | RNVC: 2
867-2LI0NS15: RNCC: 5 | RNVC: 9
C311E15: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-417-1013
Hand Reamer

144171013
530765: RNCC: 3 | RNVC: 2

1 Jul 1987

5110-14-521-6482
Hand Reamer

145216482
FP5,1H7: RNCC: 3 | RNVC: 2
COBAFP5-1H7: RNCC: 5 | RNVC: 2

30 Aug 2000

5110-15-074-5961
Hand File

150745961
8D140UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5967
Hand File

150745967
4D160UNI5669: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-540-8509
Chisel Bar

145408509
7106300001: RNCC: 3 | RNVC: 2
3303807106034: RNCC: 5 | RNVC: 2

23 Apr 2004

5110-15-074-6231
Hand Rasp

150746231
1-2D200UNI5524: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5975
Hand File

150745975
10D160UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-125-7430
Pipe Cutter

151257430
602A: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-101-2156
Hand Cold Chisel

151012156
362: RNCC: 3 | RNVC: 2

15 May 1987

5110-15-074-6569
Hand Reamer

150746569
3UNI524ACCIAI0ALCARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-414-2714
Paper Cutter

144142714
5H150: RNCC: 3 | RNVC: 9
5H150: RNCC: 5 | RNVC: 9

28 Jan 1987

5110-15-196-6812
Hand Reamer

151966812
PN UAS 00038635: RNCC: 3 | RNVC: 2
3416F76032716: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-274-8064
Hand File

142748064
2405-140-0: RNCC: 3 | RNVC: 2
504-00-140: RNCC: 3 | RNVC: 2
690-140-0: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-15-238-3133
Pipe Cutter

152383133
32112989-434: RNCC: 3 | RNVC: 2

27 Aug 2007

5110-15-074-6042
Hand File

150746042
1-1-2D300UNI5500: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-242-3329
Hand Reamer

142423329
NO PRIMARY REF14-242-3329: RNCC: 3 | RNVC: 2
530668: RNCC: 5 | RNVC: 2
1699: RNCC: 5 | RNVC: 2
AA7-62NF1-1699: RNCC: 5 | RNVC: 2
BFAA7-62NF1-1699: RNCC: 5 | RNVC: 9

1 Jan 1967

5110-14-464-4967
Hand Reamer

144644967
854-600-033-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5110-14-270-3980
Hand Reamer

142703980
E66003-14RS: RNCC: 2 | RNVC: 2
EXP-QC-TD-14: RNCC: 3 | RNVC: 2
168-14: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-14-426-2223
Hand Hacksaw Blade

144262223
ULTRARECORD300X13X0,65-8D/18T: RNCC: 3 | RNVC: 9
DEMULTRARECORD300X13X0,65-8D/18T: RNCC: 5 | RNVC: 9

9 Aug 1988

5110-15-074-6151
Hand File

150746151
14-105D: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6690
Hand Reamer

150746690
17-35UNI535ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-213-5606
Hand File

142135606
E75001LE150A: RNCC: 2 | RNVC: 2
912-150B: RNCC: 3 | RNVC: 2
0912150104: RNCC: 3 | RNVC: 2
112-BA-150: RNCC: 3 | RNVC: 2
0912150101: RNCC: 3 | RNVC: 2

1 Jan 1964

5110-33-211-4826
Craftsman's Knife

332114826
195606: RNCC: 3 | RNVC: 2

17 Nov 2013

5110-15-054-1362
Crosscut Hand Saw

150541362
56-5-294-250: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-274-7979
Firmer Chisel

142747979
E73-201-45EMMANCHE: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-14-204-8246
Bow Saw

142048246
NO PRIMARY REF14-204-8246: RNCC: 3 | RNVC: 2
7-700X8TENDEURMETAL: RNCC: 5 | RNVC: 9
7-70TENDEURMETAL: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-15-074-5850
Hand File

150745850
D125UNI5494: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-530-2004
Hand File

145302004
PAM.B350: RNCC: 3 | RNVC: 2

22 May 2002

5110-15-074-6054
Hand File

150746054
250UNI5504: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6124
Hand File

150746124
10-104BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-451-1125
Hand Cold Chisel

144511125
76115: RNCC: 3 | RNVC: 2
89280664: RNCC: 5 | RNVC: 2

30 Oct 1991

5110-15-074-3296
Hand File

150743296
D200UNI5488: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-018-6013
Hand Cold Chisel

270186013
5110-15881-00001: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-33-003-6147
Hand File

330036147
414103: RNCC: 3 | RNVC: 2

25 May 1998

5110-33-005-4330
Ship Scraper

330054330
N 155: RNCC: 3 | RNVC: 2

25 Jul 2001

5110-15-074-6911
Firmer Chisel

150746911
14ART106: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-155-7071
Hand Graver

151557071
D643.76.779: RNCC: 3 | RNVC: 2
D64376779: RNCC: 3 | RNVC: 2

22 May 2002

5110-15-074-6944
Firmer Chisel

150746944
22ART108: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-375-3014
Hand Cold Chisel

143753014
B61475V: RNCC: 3 | RNVC: 2

26 Feb 1982

5110-14-550-3174
Bearing Scraper

145503174
1499: RNCC: 3 | RNVC: 2

15 Jun 2006

5110-33-156-5815
Hand Hacksaw Blade

331565815
429.018: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-074-6910
Firmer Chisel

150746910
12ART106: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-196-0643
Firmer Chisel Set

151960643
PN UAS 00025958: RNCC: 3 | RNVC: 2
5180F76011984: RNCC: 5 | RNVC: 9

31 Mar 2004

5110-15-074-6168
Hand File

150746168
8-107BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-27-015-8799
Smooth Plane

270158799
99999-NIIN-DA0037562: RNCC: 2 | RNVC: 1

17 Dec 2002

5110-33-106-1226
Hand File

331061226
423402: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-27-007-9466
Hand Wire Stripper

270079466
JT16683: RNCC: 2 | RNVC: 1

10 Jun 2002

5110-15-124-8012
Knife Blade

151248012
5283: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-226-7431
Hand Hacksaw Frame

142267431
3148511883105: RNCC: 3 | RNVC: 2
130179: RNCC: 5 | RNVC: 2
0188300: RNCC: 5 | RNVC: 2
603: RNCC: 5 | RNVC: 2
181N: RNCC: 5 | RNVC: 2
91450073: RNCC: 5 | RNVC: 2
191: RNCC: 5 | RNVC: 9
NUMER065P0IGNEEB0IS: RNCC: 5 | RNVC: 9

1 Jan 1966

5110-15-198-5652
Craftsman's Knife

151985652
LA220B: RNCC: 3 | RNVC: 2

14 Oct 2004

5110-14-228-7743
Hand File

142287743
E75001LR200A: RNCC: 2 | RNVC: 2

1 Jan 1966

5110-27-019-8400
Turning Chisel

270198400
10091KLXL0015: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-520-7072
Rivet Cutter

145207072
AT501R: RNCC: 3 | RNVC: 2

5 Jun 2000

5110-33-103-9228
Hand File

331039228
360.611: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-550-3315
Hand Hacksaw Frame

145503315
601 PB: RNCC: 3 | RNVC: 2

16 Jun 2006

5110-14-295-6816
Hand Reamer

142956816
E74112-29RS: RNCC: 2 | RNVC: 2

1 Jan 1973

5110-15-074-6432
Hand Reamer

150746432
4UNI525TAGLIENTIELICACCLEGUTENS-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-14-244-0909
Hand Reamer

142440909
NF E 66-003/30,5: RNCC: 2 | RNVC: 2
8040101-30,5: RNCC: 3 | RNVC: 2
E74104-30-5FS: RNCC: 5 | RNVC: 2
E66-003-30,5: RNCC: 5 | RNVC: 2
TKF8040101-30,5: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-14-271-6055
Hand File

142716055
E75001LG350B: RNCC: 2 | RNVC: 2
0913350201: RNCC: 3 | RNVC: 2
913-350DD: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-15-074-6453
Hand Reamer

150746453
25UNI525TAGLIENTIELICACCLEGUTEN-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-6443
Hand Reamer

150746443
15UNI525TAGLIENTIELICACCLEGUTEN-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-6897
Hand Masonry Drill

150746897
400-18ART42410: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-204-2046
Hand Drill

152042046
DCD925B2-QW: RNCC: 3 | RNVC: 2
(241)AD003DCD925B2-QW: RNCC: 5 | RNVC: 2

23 Sep 2011

5110-15-074-6957
Firmer Chisel

150746957
20ART109: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-272-3617
Hand Cold Chisel

142723617
263.30: RNCC: 3 | RNVC: 2
26-300: RNCC: 3 | RNVC: 2
3442306: RNCC: 3 | RNVC: 2
3148511616000: RNCC: 5 | RNVC: 2
0714 63 06: RNCC: 5 | RNVC: 2
263-30: RNCC: 5 | RNVC: 2
0161600: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-054-1399
Dovetail Saw

150541399
2570G: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-271-6042
Hand File

142716042
E75001LC350C: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-466-9857
Back Saw

144669857
B720.1: RNCC: 3 | RNVC: 2

14 Dec 1993

5110-15-009-8737
Hand File

150098737
2561/2/10: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-33-103-9078
Hand File

331039078
350.152: RNCC: 3 | RNVC: 2

22 Jun 1995

5110-15-074-6628
Hand Reamer

150746628
16UNI532ACCIAI0CARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-264-0742
Hand Cold Chisel

142640742
3442304: RNCC: 3 | RNVC: 2
263.22: RNCC: 3 | RNVC: 2
130214: RNCC: 5 | RNVC: 2
3148511615607: RNCC: 5 | RNVC: 2
0714 63 04: RNCC: 5 | RNVC: 2
263-22: RNCC: 5 | RNVC: 2
0161560: RNCC: 5 | RNVC: 9
253-22: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-14-235-4107
Hand Reamer

142354107
E66012A5RS: RNCC: 2 | RNVC: 2

1 Jan 1967

5110-15-074-6293
Hand Reamer

150746293
45UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6147
Hand File

150746147
16-105MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-274-8375
Hand File

142748375
0925300404: RNCC: 3 | RNVC: 2
120-BAT-300: RNCC: 3 | RNVC: 2
1673BATARDE: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-33-155-1303
Hand File

331551303
LIMA TRIANGULAR FINA 12": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-27-054-7832
Scraper Blade

270547832
201196: RNCC: 2 | RNVC: 2

13 Oct 2011

5110-27-021-9083
Corner Bit Brace

270219083
3382: RNCC: 2 | RNVC: 1

13 Jan 2004

5110-27-044-9630
Pipe Cutter

270449630
I21-225: RNCC: 2 | RNVC: 1

23 Mar 2009

5110-14-464-4894
Dimpling Die

144644894
851-910-034-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5110-14-540-8332
Hand Reamer

145408332
2212 20: RNCC: 3 | RNVC: 2
2212200: RNCC: 5 | RNVC: 9

23 Apr 2004

5110-15-188-8240
Hand Post Drill

151888240
0586Q9181: RNCC: 3 | RNVC: 2
LTF RB8S: RNCC: 3 | RNVC: 2
(241)AG6220586Q9181: RNCC: 5 | RNVC: 2

25 Nov 2009

5110-15-074-7023
Turning Chisel

150747023
8ART102CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-050-6162
Hand Rasp

150506162
D300UNI5524: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-360-3703
Drilling Post

143603703
393211: RNCC: 3 | RNVC: 2

23 Nov 1979

5110-15-151-4584
Hand Cold Chisel

151514584
DMFH0020000: RNCC: 3 | RNVC: 2

29 May 2000

5110-14-530-2006
Hand File

145302006
AIG.0V140T2: RNCC: 3 | RNVC: 2
3148516317001: RNCC: 5 | RNVC: 2

22 May 2002

5110-15-195-0080
Hand Post Drill

151950080
AD32500W: RNCC: 3 | RNVC: 2
(241)A4155AD32500W: RNCC: 5 | RNVC: 2

16 Feb 2011

5110-27-057-8931
Hand Wire Stripper

270578931
03753 50 054: RNCC: 2 | RNVC: 1

13 Nov 2012

5110-33-103-9212
Hand File

331039212
360.162: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-270-3991
Hand Reamer

142703991
E74104-35RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-542-7269
Paper Cutter

145427269
376M2140: RNCC: 3 | RNVC: 2
376M501: RNCC: 5 | RNVC: 2

4 Aug 2004

5110-14-542-4931
Hand File Set

145424931
CLE.BAM100: RNCC: 3 | RNVC: 2
0609190: RNCC: 5 | RNVC: 2
CLE.BAM: RNCC: 5 | RNVC: 2
XX070410: RNCC: 6 | RNVC: 9

21 Jul 2004

5110-14-271-7257
Firmer Chisel

142717257
E73-201CISEAUDESCULPTEUR12: RNCC: 2 | RNVC: 2
131-12: RNCC: 3 | RNVC: 2
4597-12: RNCC: 3 | RNVC: 2
862-2-12: RNCC: 5 | RNVC: 2
3521-12: RNCC: 5 | RNVC: 9
381-19-12: RNCC: 5 | RNVC: 9
862-12: RNCC: 5 | RNVC: 9
C001E12: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-14-270-4000
Hand Reamer

142704000
E74104-48RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-33-103-9142
Hand Rasp

331039142
351.162: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-199-0856
Hand Cold Chisel

151990856
3603/4-250: RNCC: 3 | RNVC: 2
C3603/4-250: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-055-3633
Hand File

150553633
B175UNI5494B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-117-2151
Hand File Set

151172151
E194 SE: RNCC: 3 | RNVC: 2
464899063: RNCC: 5 | RNVC: 2

8 Sep 1993

5110-15-055-3621
Hand File

150553621
D125UNI5489B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-379-1239
Hand Reamer

143791239
14231-42760: RNCC: 3 | RNVC: 2

6 Sep 1982

5110-15-075-0827
Hand File

150750827
3D180VNI5670A: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-050-9086
Hand File

150509086
5-5INUNI5672: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-33-155-1290
Hand File

331551290
LIMA REDONDA FINA 14": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-14-273-7514
Hand Reamer

142737514
RL07-50X60: RNCC: 3 | RNVC: 2
3090-50-60: RNCC: 3 | RNVC: 9
30-01-50A60: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-074-6112
Hand File

150746112
16INART103BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6858
Hand Cold Chisel

150746858
200-22ART32650CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-27-000-8165
Bolt Cutter

270008165
2350 16 0036: RNCC: 3 | RNVC: 2

11 Jun 1991

5110-14-515-0579
Hand Cold Chisel

145150579
851-500-323-0: RNCC: 3 | RNVC: 2

30 Jun 1999

5110-33-005-4327
Hand File

330054327
4076 16CM. BASTA: RNCC: 3 | RNVC: 2
448702: RNCC: 5 | RNVC: 2

25 Jul 2001

5110-14-210-5446
Hand File

142105446
E75001LF200B: RNCC: 2 | RNVC: 2
0914200201: RNCC: 3 | RNVC: 2
914-200DD: RNCC: 3 | RNVC: 2

1 Jan 1964

5110-15-009-8706
Hand Reamer

150098706
570/9: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-15-114-3780
Hand Hacksaw Frame

151143780
C5757126: RNCC: 3 | RNVC: 2

9 Jun 1992

5110-15-123-6581
Pipe Cutter

151236581
334: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-33-103-9124
Hand File

331039124
350.613: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-15-194-8102
Hand File

151948102
09900138: RNCC: 3 | RNVC: 2
990 B PC: RNCC: 3 | RNVC: 2
(241)A157209900138: RNCC: 5 | RNVC: 2

21 Jan 2011

5110-15-074-6175
Hand File

150746175
12-107MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-544-5234
Hand Wire Stripper

145445234
04010008000: RNCC: 3 | RNVC: 2
4010-T: RNCC: 5 | RNVC: 2
162-5357: RNCC: 5 | RNVC: 2
AA003147: RNCC: 6 | RNVC: 9

8 Feb 2005

5110-33-106-1225
Hand File

331061225
422207: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-27-057-0581
Hand File Set

270570581
J72-0851: RNCC: 2 | RNVC: 1

13 Jun 2012

5110-33-103-9088
Hand File

331039088
350.183: RNCC: 3 | RNVC: 2

22 Jun 1995

5110-15-074-6845
Hand Cold Chisel

150746845
100-15ART32650: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6516
Hand Reamer

150746516
12UNI525TAGLIENTIELICACCSUPERRA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-6727
Hand Reamer

150746727
26UNI538ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6952
Firmer Chisel

150746952
12ART109: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6374
Hand Reamer

150746374
4UNI525ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6926
Firmer Chisel

150746926
16ART106CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6049
Hand File

150746049
B300UNI5502B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5830
Hand File

150745830
D300UNI5493: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6102
Hand File

150746102
16INART104MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-373-7805
File Handle

143737805
MAN.2: RNCC: 3 | RNVC: 2
3148516291103: RNCC: 5 | RNVC: 2
MAN2: RNCC: 5 | RNVC: 2
91355329: RNCC: 5 | RNVC: 2
0629110: RNCC: 5 | RNVC: 9

13 Nov 1981

5110-15-074-6392
Hand Reamer

150746392
22UNI525ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6437
Hand Reamer

150746437
9UNI525TAGLIENTIELICACCLEGUTENS-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-27-024-0633
Bolt Cutter

270240633
2350 29 0038: RNCC: 2 | RNVC: 1
2350 29 0038: RNCC: 2 | RNVC: 1

11 Sep 2004

5110-15-074-6656
Hand Reamer

150746656
25UNI532ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6389
Hand Reamer

150746389
19UNI525ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-201-0473
Hand Reamer

142010473
R607-17X21: RNCC: 3 | RNVC: 2
3090-17-21: RNCC: 5 | RNVC: 2
30-01-17A21: RNCC: 5 | RNVC: 9
1-14-17A21: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-512-0554
Hand File

145120554
AIG-CR0180T2: RNCC: 3 | RNVC: 2

3 Feb 1999

5110-14-472-3676
Hand File

144723676
850.EF350: RNCC: 3 | RNVC: 2
3148512079002: RNCC: 5 | RNVC: 2
850.EF 350: RNCC: 5 | RNVC: 2
850EF350: RNCC: 5 | RNVC: 2
0207900: RNCC: 5 | RNVC: 9

19 Oct 1994

5110-14-544-1027
Knife Blade

145441027
K71380: RNCC: 3 | RNVC: 2
K71380: RNCC: 5 | RNVC: 2

4 Jan 2005

5110-14-201-9886
File Handle

142019886
B54516-38A18: RNCC: 2 | RNVC: 2

1 Jan 1962

5110-14-213-5603
Hand File

142135603
E75001LC150A: RNCC: 2 | RNVC: 2
0910150101: RNCC: 3 | RNVC: 2
910-150B: RNCC: 3 | RNVC: 2
0910150104: RNCC: 3 | RNVC: 2
109-BA-150: RNCC: 3 | RNVC: 2

1 Jan 1964

5110-15-074-6973
Firmer Chisel

150746973
40ART109: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-192-5295
Back Saw

331925295
8831.012: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-074-6263
Hand Reamer

150746263
7UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-326-1664
Hand File

143261664
LS302-300: RNCC: 3 | RNVC: 2

2 Jul 1975

5110-15-074-5970
Hand File

150745970
71-2D160UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-457-9532
Scraper Blade

144579532
853-600-425-0: RNCC: 3 | RNVC: 2

2 Oct 1992

5110-14-344-5300
Hand File

143445300
C90980: RNCC: 3 | RNVC: 2
85-689-4238: RNCC: 6 | RNVC: 9

10 Aug 1977

5110-33-125-1041
Hand Hacksaw Blade

331251041
1121.024: RNCC: 3 | RNVC: 2
58 2900: RNCC: 5 | RNVC: 2
3906-300-24-10P: RNCC: 5 | RNVC: 2
7311518233730: RNCC: 5 | RNVC: 2

15 Feb 1994

5110-14-274-7986
Woodcarving Gouge

142747986
E73-201G0UGEBISEAUEXTERIEUR10: RNCC: 2 | RNVC: 2
867-2LI0NS10: RNCC: 5 | RNVC: 2
867-2LI0NS10: RNCC: 5 | RNVC: 9
C311E10: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-074-6222
Hand Rasp

150746222
1-2D300UNI5521: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-003-6148
Hand File

330036148
414301: RNCC: 3 | RNVC: 2

25 May 1998

5110-15-199-0672
Hand Reamer Set

151990672
7623/11: RNCC: 3 | RNVC: 2
F7623/11: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-33-003-6139
Hand File

330036139
408706: RNCC: 3 | RNVC: 2

25 May 1998

5110-33-103-9174
Hand File

331039174
352.622: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-074-6738
Hand Reamer

150746738
32UNI538ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-188-5418
Chisel Bar

151885418
MK119: RNCC: 3 | RNVC: 2
(241)AF120MK119: RNCC: 5 | RNVC: 2

5 Oct 2009

5110-15-237-5073
Bolt Cutter

152375073
511015E063698: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-074-5969
Hand File

150745969
7D140UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-143-2940
Hand Reamer

151432940
260-14-430-03-A557A: RNCC: 3 | RNVC: 2
SF260-14-430-03-A557A: RNCC: 3 | RNVC: 2
260-14-430-03-A557A: RNCC: 5 | RNVC: 9
SF260-14-430-03-A557A: RNCC: 5 | RNVC: 9

10 Dec 1996

5110-15-054-1361
Crosscut Hand Saw

150541361
56-5-278-400: RNCC: 3 | RNVC: 2

6 Feb 1971

5110-14-271-5954
Hand Reamer

142715954
E74111-13FS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-33-004-4901
Hand Drill

330044901
TALADRADORA DE SOBREMESA: RNCC: 3 | RNVC: 2
TALADRADORA DE SOBREMESA: RNCC: 5 | RNVC: 2

2 Jun 1999

5110-33-211-1126
Tailor's Shears

332111126
03093: RNCC: 3 | RNVC: 2

15 Jun 2013

5110-15-074-6939
Firmer Chisel

150746939
14ART108: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-103-9083
Hand File

331039083
350.171: RNCC: 3 | RNVC: 2

22 Jun 1995

5110-14-442-5245
Hand Reamer

144425245
J29585-53: RNCC: 3 | RNVC: 9
AEDJ29585-53: RNCC: 5 | RNVC: 9

17 Oct 1990

5110-15-199-0862
Hand Cold Chisel

151990862
3602/2-2: RNCC: 3 | RNVC: 2
C3602/2-2: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-274-8536
Hand Rasp

142748536
E75001RA350B: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-15-055-3626
Hand File

150553626
1-2D175UNI5489B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-33-204-0303
Doweling Jig

332040303
U3-AYC1138-1002: RNCC: 3 | RNVC: 2

7 Feb 2005

5110-14-274-8093
Hand File

142748093
2405-180-2: RNCC: 3 | RNVC: 2
504-0-180: RNCC: 3 | RNVC: 2
690-180-2: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-33-155-9634
Tube Cutter

331559634
3865.001: RNCC: 3 | RNVC: 2
32116: RNCC: 3 | RNVC: 2
276.016: RNCC: 3 | RNVC: 2
8620.00160: RNCC: 5 | RNVC: 2

9 Jan 1991

5110-15-074-5933
Hand File

150745933
1D140UNI5669: RNCC: 2 | RNVC: 2

10 Oct 1981

5110-14-264-4794
Hand Reamer

142644794
E74104-31-5FS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-33-202-8811
Nested Saws

332028811
4539-24: RNCC: 3 | RNVC: 2

18 Nov 2003

5110-14-414-2706
Paper Cutter

144142706
NO PRIMARY REF14-414-2706: RNCC: 3 | RNVC: 2
79-01: RNCC: 5 | RNVC: 9

28 Jan 1987

5110-15-209-9761
Hand Graver

152099761
368002: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-33-103-9100
Hand File

331039100
350.263: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-15-195-9478
Hand File

151959478
017200109: RNCC: 3 | RNVC: 2

30 May 2011

5110-15-074-3287
Hand File

150743287
1-2D150UNI5488: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5938
Hand File

150745938
11-2D160UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-052-6790
Hand File

150526790
D225UNI5493: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-074-6109
Hand File

150746109
10INART103BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6638
Hand Reamer

150746638
8UNI532ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-269-4481
Gimlet

142694481
NO PRIMARY REF14-269-4481: RNCC: 3 | RNVC: 2
VRILLEPRISETEMPERATUREVIANDEC0NG: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-15-050-6094
Hand File

150506094
B250UNI5494B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-197-1687
Nested Saws

151971687
PN UAS 00048192: RNCC: 3 | RNVC: 2
3405F76039232: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-540-8531
Firmer Chisel

145408531
7011120201: RNCC: 3 | RNVC: 2

23 Apr 2004

5110-15-207-3152
Bow Saw

152073152
504358838: RNCC: 3 | RNVC: 2
(241)A4249504358838: RNCC: 5 | RNVC: 2

8 Oct 2012

5110-33-192-5288
Docking Hand Saw

331925288
8801.018: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-074-7150
Blacksmith's Chisel

150747150
1-25UNI14133U52W20-2955: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-402-9079
Hand File

144029079
PIL.B200: RNCC: 3 | RNVC: 2
PILB200: RNCC: 5 | RNVC: 2

25 Jul 1985

5110-15-074-3257
Hand File

150743257
B250UNI5487: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6617
Hand Reamer

150746617
2-5UNI531ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-103-9086
Hand File

331039086
350.181: RNCC: 3 | RNVC: 2

22 Jun 1995

5110-33-103-9126
Hand File

331039126
350.632: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-14-207-0870
Compass Saw Blade

142070870
NO PRIMARY REF14-207-0870: RNCC: 3 | RNVC: 2
316-350: RNCC: 5 | RNVC: 2
316-350: RNCC: 5 | RNVC: 9
32235LAME: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-15-074-6959
Firmer Chisel

150746959
24ART109: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-418-1685
Hand File

144181685
AIG.CAR100T2: RNCC: 3 | RNVC: 2
3148516311603: RNCC: 5 | RNVC: 2
AIGCAR100T2: RNCC: 5 | RNVC: 2
0631160: RNCC: 5 | RNVC: 9

6 Aug 1987

5110-14-520-9806
Pocket Knife

145209806
0-29800-00000-47: RNCC: 3 | RNVC: 2
COUTEAU 6 PIECES NGI0-29800: RNCC: 5 | RNVC: 9

28 Jun 2000

5110-14-244-0925
Hand Reamer

142440925
NF E 66-003/16,5: RNCC: 2 | RNVC: 2
8040101-16,5: RNCC: 3 | RNVC: 2
E66003-16,5: RNCC: 5 | RNVC: 2
E74104-16-5FS: RNCC: 5 | RNVC: 2
TKF8040101-16,5: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-14-273-7512
Hand Reamer

142737512
R607-32X40: RNCC: 3 | RNVC: 2
3090-32-40: RNCC: 3 | RNVC: 9
30-01-32A40: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-33-005-4230
Bolt Cutter

330054230
297.002/V: RNCC: 3 | RNVC: 2

23 Jul 2001

5110-14-439-7329
Bearing Scraper

144397329
C40: RNCC: 3 | RNVC: 2

21 May 1990

5110-15-074-6719
Hand Reamer

150746719
29UNI538ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6899
Hand Cold Chisel

150746899
250-12ART42410: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6323
Hand Reamer

150746323
32UNI525ACCLEGUT: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6725
Hand Reamer

150746725
20UNI538ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6280
Hand Reamer

150746280
24UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-207-5054
Auger Handle

142075054
NO PRIMARY REF14-207-5054: RNCC: 3 | RNVC: 2
15400: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-33-103-9105
Hand File

331039105
350.282: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-15-199-0857
Hand Cold Chisel

151990857
3602/2-7: RNCC: 3 | RNVC: 2
C3602/2-7: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-213-5602
Hand File

142135602
E75001LC100C: RNCC: 2 | RNVC: 2
0910100301: RNCC: 3 | RNVC: 2
910-100D: RNCC: 3 | RNVC: 2
0910100304: RNCC: 3 | RNVC: 2
109-DX-100: RNCC: 3 | RNVC: 2

1 Jan 1964

5110-15-074-7051
Firmer Gouge

150747051
6ART113: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-161-6847
Hand Bench Shears

331616847
42.53: RNCC: 2 | RNVC: 2

24 Jul 1995

5110-27-018-8079
Corner Bit Brace

270188079
633435: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-12-384-2793
Enclosed Blade Tube Deburring Tool

123842793
113810: RNCC: 3 | RNVC: 2
REMS REG 10-42: RNCC: 5 | RNVC: 2

9 Feb 2011

5110-14-336-5419
Hand Reamer

143365419
E66011A13-5RS: RNCC: 3 | RNVC: 2

14 Aug 1976

5110-14-271-5894
Hand Reamer

142715894
E74111-18RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-074-6713
Hand Reamer

150746713
10-5UNI538ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-271-6031
Hand File

142716031
E75001LF250A: RNCC: 2 | RNVC: 2
0914250101: RNCC: 3 | RNVC: 2
914-250B: RNCC: 3 | RNVC: 2
0914250104: RNCC: 3 | RNVC: 2
110-BA-250: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-15-074-7428
Hand Hacksaw Blade

150747428
16-14UNI4000ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-020-1408
Hand File

150201408
13-005A01: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-074-6903
Hand Masonry Drill

150746903
300-15ART734: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-196-0644
Firmer Chisel Set

151960644
PN UAS 00025953: RNCC: 3 | RNVC: 2
5180F76011960: RNCC: 5 | RNVC: 9

31 Mar 2004

5110-14-204-9386
Smooth Plane

142049386
NO PRIMARY REF14-204-9386: RNCC: 3 | RNVC: 2
7120: RNCC: 5 | RNVC: 9
G20R4: RNCC: 5 | RNVC: 9
D040A50G0LDENBERG: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-14-237-9474
Hand Reamer

142379474
E66003-25RS: RNCC: 2 | RNVC: 2

1 Jan 1967

5110-14-420-7299
Coping Saw Frame

144207299
M20: RNCC: 3 | RNVC: 2

16 Dec 1987

5110-15-055-3630
Hand File

150553630
B175UNI5493B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-197-0930
Hand Rasp

151970930
PN UAS 00038493: RNCC: 3 | RNVC: 2
5110F76032639: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-074-5921
Hand File

150745921
B150UNI5498A: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5818
Hand File

150745818
1-2D125UNI5493: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-370-1127
Hand Cold Chisel

143701127
258: RNCC: 3 | RNVC: 2
130086: RNCC: 5 | RNVC: 2
3148511609002: RNCC: 5 | RNVC: 2
0714 63 34: RNCC: 5 | RNVC: 2
0160900: RNCC: 5 | RNVC: 9

18 May 1981

Load More Results