What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 38 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 38of 112

5110-14-244-0921
Hand Reamer

142440921
NF E 66-003/11,5: RNCC: 2 | RNVC: 2
8040101-11,5: RNCC: 3 | RNVC: 2
E66003-11,5: RNCC: 5 | RNVC: 2
E74104-11-5FS: RNCC: 5 | RNVC: 2
TKF8040101-11,5: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-15-063-9406
Hand File

150639406
62321-35/021: RNCC: 3 | RNVC: 2

25 May 1983

5110-15-074-7434
Hand Hacksaw Blade

150747434
13-32UNI4000ACCIAI0RAPID0SUPER: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-464-4948
Hand Reamer

144644948
854-600-014-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5110-33-103-9177
Hand File

331039177
352.652: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-074-6565
Hand Reamer

150746565
1UNI524ACCIAI0ALCARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-264-3245
Gimlet

142643245
390-7: RNCC: 3 | RNVC: 2
4617-7: RNCC: 3 | RNVC: 9
381-08-7: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-15-147-7285
End Cutting Nippers

151477285
DMR-CA: RNCC: 3 | RNVC: 2

17 Mar 1998

5110-14-552-7367
Bolt Cutter

145527367
990.A00: RNCC: 3 | RNVC: 2
990.A00: RNCC: 5 | RNVC: 2
3148512174004: RNCC: 5 | RNVC: 2

26 Jan 2007

5110-14-488-5551
Hand Wire Stripper

144885551
174.4: RNCC: 3 | RNVC: 2
0140314: RNCC: 5 | RNVC: 2
174-4: RNCC: 5 | RNVC: 2
3148511403143: RNCC: 5 | RNVC: 2

21 May 1997

5110-14-298-5359
Hand Cape Chisel

142985359
7211140001: RNCC: 3 | RNVC: 2
SYQ0709: RNCC: 5 | RNVC: 2
30-160: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-14-244-0906
Hand Reamer

142440906
NF E 66-003/26,5: RNCC: 2 | RNVC: 2
8040101-26,5: RNCC: 3 | RNVC: 2
E66-003-26,5: RNCC: 5 | RNVC: 2
E74104-26-5FS: RNCC: 5 | RNVC: 2
TKF8040101-26,5: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-14-488-5315
Hand Reamer

144885315
E74112-6-8RS: RNCC: 2 | RNVC: 2
F-P-6,8: RNCC: 3 | RNVC: 2
164-6,8: RNCC: 3 | RNVC: 2
FP6-8: RNCC: 5 | RNVC: 2
164-6-8: RNCC: 5 | RNVC: 2

15 May 1997

5110-33-155-1117
Hand File

331551117
LIMA PLANA BASTA DE 5": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-15-054-4807
Crosscut Hand Saw

150544807
5445: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-496-7092
Hand Cape Chisel

144967092
254A.8: RNCC: 3 | RNVC: 2
254A8: RNCC: 5 | RNVC: 2
3148511604014: RNCC: 5 | RNVC: 2
1063696A00: RNCC: 5 | RNVC: 2
FACOM 254A-8: RNCC: 5 | RNVC: 2
254A.8: RNCC: 5 | RNVC: 2
958 274 000 001: RNCC: 6 | RNVC: 9
F300 0T 021 9426: RNCC: 6 | RNVC: 9

15 Oct 1997

5110-15-074-6877
Hand Cape Chisel

150746877
130-4ART364: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-068-3911
Hand Reamer

150683911
12000-5: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-15-074-5834
Hand File

150745834
B125UNI5494: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-465-7531
Hand Reamer

144657531
851-600-858-0: RNCC: 3 | RNVC: 2

14 Oct 1993

5110-15-009-8662
Hand File

150098662
2562/2/6: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-14-273-7513
Hand Reamer

142737513
R607-40X50: RNCC: 3 | RNVC: 2
3090-40-50: RNCC: 3 | RNVC: 9
30-01-40A50: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-285-4789
Jeweler's Saw Blade

142854789
NO PRIMARY REF14-285-4789: RNCC: 3 | RNVC: 2
M2: RNCC: 5 | RNVC: 2

1 Jan 1972

5110-14-271-5932
Hand Reamer

142715932
E74111-10FS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-074-6082
Hand File

150746082
16INART102BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-112-6013
End Cutting Nippers

151126013
E114: RNCC: 3 | RNVC: 2

7 Sep 1989

5110-15-074-5845
Hand File

150745845
1-2D250UNI5494: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-120-9077
Hand File

151209077
STD/04.048: RNCC: 3 | RNVC: 2

4 Sep 1995

5110-14-276-3208
Hand Reamer

142763208
E74112-8RS: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-14-274-8305
Hand File

142748305
504-2-180: RNCC: 3 | RNVC: 2
2405-180-4: RNCC: 3 | RNVC: 2
4478-180-4: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-33-108-5888
Tailor's Shears

331085888
76946-306/12: RNCC: 3 | RNVC: 2

30 Apr 2001

5110-14-555-9209
Nozzle Broach Set

145559209
6525954: RNCC: 3 | RNVC: 2

8 Jan 2008

5110-15-074-6958
Firmer Chisel

150746958
22ART109: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6535
Hand Reamer

150746535
35UNI525TAGLIENTIELICACCSUPERRA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-6697
Hand Reamer

150746697
10-25UNI535ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-471-9851
Hand File

144719851
FRC.MD300: RNCC: 3 | RNVC: 2
0647830: RNCC: 5 | RNVC: 2
FRCMD300: RNCC: 5 | RNVC: 2
3148516478306: RNCC: 5 | RNVC: 2
FR.CMD300: RNCC: 5 | RNVC: 2
FRC.MD 300: RNCC: 5 | RNVC: 2

28 Sep 1994

5110-14-270-3981
Hand Reamer

142703981
E66003-16RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-33-155-1103
Hand File

331551103
LIMA CUADRADA FINA 12": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-15-113-3555
Scraper Blade

151133555
8294274: RNCC: 3 | RNVC: 2

30 May 1989

5110-33-003-6099
Pliers

330036099
4701.016: RNCC: 3 | RNVC: 2

25 May 1998

5110-15-050-9080
Hand File

150509080
D20UNI5492B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-050-6089
Hand File

150506089
B125UNI5494B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-27-018-4212
Corner Bit Brace

270184212
209-070-574-1: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-438-9581
Hand Reamer

144389581
330A97-2102-25: RNCC: 3 | RNVC: 2

11 Apr 1990

5110-14-201-7252
Hand Reamer

142017252
E74104-270RN: RNCC: 2 | RNVC: 2

1 Jan 1962

5110-27-039-5429
Ratchet Bit Brace

270395429
9BM 7310-00101: RNCC: 2 | RNVC: 1

6 Dec 2007

5110-33-106-1180
Hand File

331061180
BL4006 8B: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-33-205-8930
Hand Belt Cutter

332058930
SBCU82: RNCC: 3 | RNVC: 2

7 May 2007

5110-33-103-9235
Hand File

331039235
360.662: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-368-1861
Hand File Set

143681861
STU: RNCC: 3 | RNVC: 2
3148515192104: RNCC: 5 | RNVC: 2
91635376: RNCC: 5 | RNVC: 2
0519210: RNCC: 5 | RNVC: 9

20 Feb 1981

5110-14-202-2881
Gimlet

142022881
390-8: RNCC: 3 | RNVC: 2
1908-8: RNCC: 3 | RNVC: 9
2-8: RNCC: 5 | RNVC: 9
4617-8: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-14-274-7778
Smooth Plane

142747778
4544-40: RNCC: 3 | RNVC: 9

1 Jan 1971

5110-14-298-7871
Miter Box

142987871
4489-35-8: RNCC: 3 | RNVC: 9

1 Jan 1973

5110-15-199-0671
Hand Reamer

151990671
7730-10.5: RNCC: 3 | RNVC: 2
F7730-10.5: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-488-5314
Hand Reamer

144885314
E74112-10-2RS: RNCC: 2 | RNVC: 2
F-P-10,2: RNCC: 3 | RNVC: 2
164-10,2: RNCC: 3 | RNVC: 2
FP10-2: RNCC: 5 | RNVC: 2
164-10-2: RNCC: 5 | RNVC: 2

15 May 1997

5110-14-271-5929
Hand Reamer

142715929
E74111-7FS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-379-1237
Hand Reamer

143791237
14231-42476: RNCC: 3 | RNVC: 2

6 Sep 1982

5110-15-196-9876
Hand File

151969876
PN UAS 00031578: RNCC: 3 | RNVC: 2
5110F76028488: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-288-1764
Hand Reamer

142881764
C46626: RNCC: 3 | RNVC: 2

1 Jan 1972

5110-15-074-6123
Hand File

150746123
8-104BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-383-8652
Hand Reamer

143838652
164-2: RNCC: 3 | RNVC: 2
F-P-2: RNCC: 3 | RNVC: 2

11 Apr 1983

5110-14-501-7902
Hand File

145017902
NO PRIMARY REF14-501-7902: RNCC: 3 | RNVC: 2
300 039 199: RNCC: 5 | RNVC: 9
4067 210 000 534: RNCC: 5 | RNVC: 9
75110 234 6548: RNCC: 5 | RNVC: 9
2 631 000: RNCC: 5 | RNVC: 9
F300 0T 000 5187: RNCC: 6 | RNVC: 9

10 Nov 1997

5110-14-298-7819
Bow Saw

142987819
24569475: RNCC: 3 | RNVC: 9
244-75-6174: RNCC: 5 | RNVC: 2
24517475: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-15-074-6062
Hand File

150746062
UNI5672: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6117
Hand File

150746117
16INART103ME220D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6003
Hand File

150746003
150UNI5516: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-3300
Hand File

150743300
D400UNI5488: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-274-7883
Reciprocating Drill

142747883
4369: RNCC: 3 | RNVC: 9

1 Jan 1971

5110-14-548-5156
Hand Wire Stripper

145485156
321011023: RNCC: 3 | RNVC: 2

24 Jan 2006

5110-15-202-5863
Paper Cutter

152025863
T02-MOS19150: RNCC: 3 | RNVC: 2

16 May 2007

5110-15-050-6212
Hand File

150506212
D200UNI5487A: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-074-6138
Hand File

150746138
8-105BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6012
Hand File

150746012
D125UNI5515B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-271-6067
Hand File

142716067
E75001LK100C: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-285-4784
Bearing Scraper

142854784
1540-150: RNCC: 3 | RNVC: 2
501-1GT: RNCC: 3 | RNVC: 2

1 Jan 1972

5110-15-074-6391
Hand Reamer

150746391
21UNI525ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6669
Hand Reamer

150746669
25UNI532ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-507-6044
Hand Cold Chisel

145076044
48401009: RNCC: 3 | RNVC: 9
030210: RNCC: 5 | RNVC: 9

27 Jul 1998

5110-14-235-3923
Wood Scraper

142353923
NO PRIMARY REF14-235-3923: RNCC: 3 | RNVC: 2
266: RNCC: 5 | RNVC: 9

1 Jan 1967

5110-15-074-6015
Hand File

150746015
200UNI5515: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-199-0949
Hand Reamer

151990949
7730-4: RNCC: 3 | RNVC: 2
F7730-4: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-206-4184
Hand Rasp

142064184
E75001RA250A: RNCC: 2 | RNVC: 2

1 Jan 1964

5110-15-054-4815
Hand Cold Chisel

150544815
59-3-766: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-280-9752
Hand Reamer

142809752
E74108D22RS: RNCC: 2 | RNVC: 1

1 Jan 1971

5110-14-398-1634
Hand File

143981634
E75001LM175B: RNCC: 2 | RNVC: 2
3148516191809: RNCC: 5 | RNVC: 2
TPAVR175: RNCC: 5 | RNVC: 2

31 Jan 1985

5110-14-541-3257
Hand File

145413257
RD.B200EM: RNCC: 3 | RNVC: 2

27 May 2004

5110-27-028-1415
Hand File Set

270281415
11051YE0111: RNCC: 2 | RNVC: 1

6 Dec 2005

5110-14-237-9481
Hand Reamer

142379481
E66003-17RS: RNCC: 2 | RNVC: 2
EXP-QC-TD-17: RNCC: 3 | RNVC: 2
168-17: RNCC: 3 | RNVC: 2

1 Jan 1967

5110-14-206-8259
Hand Rasp

142068259
E75001RC250B: RNCC: 2 | RNVC: 2
RRM25: RNCC: 5 | RNVC: 2
SYB0275: RNCC: 5 | RNVC: 2

1 Jan 1964

5110-15-074-6896
Hand Masonry Drill

150746896
300-18ART42410: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-521-6425
Hand Reamer

145216425
20020-5 G9: RNCC: 3 | RNVC: 2
R601-5G9: RNCC: 5 | RNVC: 2

30 Aug 2000

5110-27-018-8130
Corner Bit Brace

270188130
901-TS-250: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-074-7437
Firmer Gouge

150747437
16-24UNI4000ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6635
Hand Reamer

150746635
4UNI532ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-541-3253
Hand Rasp

145413253
RAB.DRD250EM: RNCC: 3 | RNVC: 2

27 May 2004

5110-14-434-9195
Hand Rasp

144349195
E75001RB300B: RNCC: 2 | RNVC: 2
0941300204: RNCC: 3 | RNVC: 2
302-MD-300: RNCC: 3 | RNVC: 2

10 Oct 1989

5110-15-179-4950
Rip Hand Saw

151794950
1-15-288: RNCC: 3 | RNVC: 2
02.13.32.89: RNCC: 5 | RNVC: 2

22 Jan 2007

5110-14-418-1692
Hand File

144181692
AIGTRI100T2: RNCC: 3 | RNVC: 2
3148516311900: RNCC: 5 | RNVC: 2

6 Aug 1987

5110-15-074-6244
Hand Rasp

150746244
1-2D350UNI5525: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-471-9909
Hand Wire Stripper

144719909
175.A3: RNCC: 3 | RNVC: 2
175A3: RNCC: 5 | RNVC: 2
3148511404157: RNCC: 5 | RNVC: 2
0140415: RNCC: 5 | RNVC: 9

28 Sep 1994

5110-14-424-3474
Hand Hacksaw Blade

144243474
600-6: RNCC: 3 | RNVC: 2

19 May 1988

5110-14-447-1339
Dimpling Punch

144471339
851-910-113-6: RNCC: 3 | RNVC: 2

3 May 1991

5110-27-056-3405
Corner Bit Brace

270563405
2HIBM-T07/56-8: RNCC: 2 | RNVC: 1

15 Mar 2012

5110-33-155-1262
Hand File

331551262
LIMA REDONDA BASTA 6": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-15-074-5824
Hand File

150745824
1-2D400UNI5493: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-437-7136
Hand Reamer

144377136
E74112-48-5RS: RNCC: 2 | RNVC: 2

14 Feb 1990

5110-14-383-8662
Hand Reamer

143838662
E74112-31-5RS: RNCC: 2 | RNVC: 2
F-P-31,5: RNCC: 3 | RNVC: 2
F-P-31-5: RNCC: 3 | RNVC: 2
164-31-5: RNCC: 3 | RNVC: 2

11 Apr 1983

5110-15-100-4123
Hand Cold Chisel

151004123
B250UNI7504: RNCC: 3 | RNVC: 2

27 Feb 1986

5110-15-196-6813
Hand Reamer

151966813
PN UAS 00038634: RNCC: 3 | RNVC: 2
3416F76032715: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-270-3998
Hand Reamer

142703998
E74104-45RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-054-1367
Crosscut Hand Saw

150541367
56-5-294-650: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-270-3927
Hand Reamer

142703927
E66011A4RN: RNCC: 2 | RNVC: 2
D7601.040: RNCC: 3 | RNVC: 2
1AH16008: RNCC: 3 | RNVC: 2
8040061-4: RNCC: 3 | RNVC: 2
703CO4: RNCC: 3 | RNVC: 2
SYQ1953: RNCC: 5 | RNVC: 2
30-05-4: RNCC: 5 | RNVC: 9
1140-4: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-14-271-5952
Hand Reamer

142715952
E74111-11-5FS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-27-018-5784
Bolt Cutter

270185784
5110-AM387-00002: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-450-6884
Doweling Jig

144506884
PF32060: RNCC: 3 | RNVC: 2
91676498: RNCC: 5 | RNVC: 2

16 Oct 1991

5110-15-074-6620
Hand Reamer

150746620
2-5UNI532ACCIAI0CARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-106-1210
Hand File Set

331061210
466201: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-14-201-5287
Firmer Chisel

142015287
E73-201CISEAUDEMENUISIER12: RNCC: 2 | RNVC: 2
628-2LI0NS12: RNCC: 5 | RNVC: 2
628-12: RNCC: 5 | RNVC: 9
C111E12: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-15-074-5860
Hand File

150745860
B250UNI5489B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-052-4057
Hand File

150524057
B200UNI5490: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-458-6719
Hand Wire Stripper

144586719
194.17AVSE: RNCC: 3 | RNVC: 2
194.17VSE: RNCC: 5 | RNVC: 2
3148511450208: RNCC: 5 | RNVC: 2
0714 01 70: RNCC: 5 | RNVC: 2
H24143: RNCC: 5 | RNVC: 2
0145020: RNCC: 5 | RNVC: 9
194.17VSE: RNCC: 5 | RNVC: 9

29 Oct 1992

5110-14-521-6426
Hand Reamer

145216426
20020-6 G9: RNCC: 3 | RNVC: 2
R601-6G9: RNCC: 5 | RNVC: 9

30 Aug 2000

5110-14-298-7824
Back Saw

142987824
NO PRIMARY REF14-298-7824: RNCC: 3 | RNVC: 2
269A30: RNCC: 5 | RNVC: 2
C269A30: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-14-421-7680
Hand File

144217680
NO PRIMARY REF14-421-7680: RNCC: 3 | RNVC: 2
91618482: RNCC: 5 | RNVC: 2
PF109-350MM: RNCC: 5 | RNVC: 9
PF109: RNCC: 5 | RNVC: 9

27 Jan 1988

5110-14-271-5908
Hand Reamer

142715908
E74111-60RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-33-203-3972
Pocket Knife

332033972
287.1720: RNCC: 3 | RNVC: 2
GRAN QUINTO: RNCC: 5 | RNVC: 2

1 Apr 2004

5110-15-199-4470
Jack Plane

151994470
D630S: RNCC: 3 | RNVC: 2
(241)A0899D630S: RNCC: 5 | RNVC: 2

5 Apr 2005

5110-14-465-1308
Hand Cold Chisel

144651308
851-930-755-0: RNCC: 3 | RNVC: 2

15 Sep 1993

5110-14-379-1232
Hand Reamer

143791232
14231-42420: RNCC: 3 | RNVC: 2

6 Sep 1982

5110-14-270-4001
Hand Reamer

142704001
E74104-50RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-33-103-9192
Hand File

331039192
359.260: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-513-3389
Hand Reamer

145133389
47067123: RNCC: 3 | RNVC: 2

16 Mar 1999

5110-15-196-9884
Hand File

151969884
PN UAS 00031579: RNCC: 3 | RNVC: 2
5110F76028489: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-074-5829
Hand File

150745829
D250UNI5493: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5913
Hand File

150745913
1-2D250UNI5495: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-102-7432
Hand File

151027432
2637 A: RNCC: 3 | RNVC: 2
(241)A03022637A: RNCC: 5 | RNVC: 2

15 May 1987

5110-15-054-1402
Dovetail Saw

150541402
4722-250: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-270-3972
Hand Reamer

142703972
E66003-6RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-33-209-3348
Single Bit Ax

332093348
8130-700 MFV: RNCC: 3 | RNVC: 2
8414299550580: RNCC: 5 | RNVC: 2

6 Oct 2011

5110-15-074-6289
Hand Reamer

150746289
38UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-120-9052
Hand Hacksaw Frame

151209052
STD/04.001: RNCC: 3 | RNVC: 2

4 Sep 1995

5110-15-074-6905
Hand Masonry Drill

150746905
500-20ART734: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-271-6022
Hand File

142716022
E75001LB250B: RNCC: 2 | RNVC: 2
102-MD-250: RNCC: 3 | RNVC: 2
0906250204: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-15-074-6873
Hand Cold Chisel

150746873
130-11ART362: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-271-7263
Firmer Chisel

142717263
E73-201CISEAUDESCULPTEUR35: RNCC: 2 | RNVC: 2
131-35: RNCC: 3 | RNVC: 2
4597-35: RNCC: 3 | RNVC: 9
862-2-35: RNCC: 5 | RNVC: 2
3521-35: RNCC: 5 | RNVC: 9
C001E35: RNCC: 5 | RNVC: 9
C011E35: RNCC: 5 | RNVC: 9
381-19-35: RNCC: 5 | RNVC: 9
862-35: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-14-528-9343
Ratchet Bit Brace

145289343
1-02-715: RNCC: 3 | RNVC: 2
1-02-715-4: RNCC: 5 | RNVC: 2
SYQ0859: RNCC: 5 | RNVC: 2
1-02-715: RNCC: 5 | RNVC: 2
3253561027154: RNCC: 5 | RNVC: 2

27 Feb 2002

5110-14-254-7318
Hand Reamer

142547318
E66011A18-5RS: RNCC: 2 | RNVC: 2
20300-18-5: RNCC: 3 | RNVC: 2

1 Jan 1969

5110-14-344-5302
Hand File

143445302
C90984: RNCC: 3 | RNVC: 2
85-689-4239: RNCC: 6 | RNVC: 9

10 Aug 1977

5110-14-370-1183
Hand File

143701183
RD.MD150EM: RNCC: 3 | RNVC: 2
RDMD150EM: RNCC: 3 | RNVC: 2
102016: RNCC: 5 | RNVC: 2
3148516510600: RNCC: 5 | RNVC: 2

18 May 1981

5110-33-211-4762
Knife Blade

332114762
SPB-0006: RNCC: 3 | RNVC: 2

16 Nov 2013

5110-14-437-7132
Hand Reamer

144377132
E74112-40-5RS: RNCC: 2 | RNVC: 2

14 Feb 1990

5110-15-195-0077
Hand Hacksaw Blade

151950077
1-15-842: RNCC: 3 | RNVC: 2
(241)A41551-15-842: RNCC: 5 | RNVC: 2

16 Feb 2011

5110-27-034-4031
Pipe Cutter

270344031
60-115: RNCC: 2 | RNVC: 1

28 Dec 2006

5110-15-074-6385
Hand Reamer

150746385
15UNI525ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-283-2201
Pocket Knife

142832201
NO PRIMARY REF14-283-2201: RNCC: 3 | RNVC: 2
C0UTEAUSTANLEY5LAMESL0T0UTILSKI: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-27-045-7900
Hand Cold Chisel

270457900
MMK 2217: RNCC: 2 | RNVC: 1

11 Jun 2009

5110-15-057-5466
End Cutting Nippers

150575466
LU2000-00: RNCC: 3 | RNVC: 2
1376-97-138: RNCC: 5 | RNVC: 2
025 E 110: RNCC: 5 | RNVC: 2

31 Dec 1975

5110-33-203-6748
Wood Scraper

332036748
RASQUETA ESCUADRA: RNCC: 3 | RNVC: 2
9999-33-P42-5311: RNCC: 6 | RNVC: 9

28 Jul 2004

5110-14-273-7479
Hand Reamer

142737479
E74103-21RS: RNCC: 2 | RNVC: 2
R603-21: RNCC: 3 | RNVC: 2
166-21: RNCC: 3 | RNVC: 2
1080-21: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-271-6024
Hand File

142716024
E75001LB300A: RNCC: 2 | RNVC: 2
102-BAT-300: RNCC: 3 | RNVC: 2
0906300104: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-14-485-3975
Bolt Cutter

144853975
990.A4: RNCC: 3 | RNVC: 2
3148512174301: RNCC: 5 | RNVC: 2
2714 010 900: RNCC: 5 | RNVC: 2
2714 020 900: RNCC: 5 | RNVC: 2
0217430: RNCC: 5 | RNVC: 9

23 Jan 1997

5110-14-401-7503
File Handle

144017503
316-20: RNCC: 3 | RNVC: 2

13 Jun 1985

5110-14-371-7763
Hand Wire Stripper

143717763
04140102000: RNCC: 3 | RNVC: 2
C35-8: RNCC: 3 | RNVC: 2
165: RNCC: 3 | RNVC: 2
414102: RNCC: 5 | RNVC: 2
5011-26: RNCC: 5 | RNVC: 2
414006: RNCC: 5 | RNVC: 2
3597470079881: RNCC: 5 | RNVC: 2
414-12: RNCC: 5 | RNVC: 2
5011Y: RNCC: 5 | RNVC: 2
85-689-9259: RNCC: 6 | RNVC: 9

5 Aug 1981

5110-27-018-8126
Corner Bit Brace

270188126
901-TD-248: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-201-5397
Hand File

142015397
E75001LA200C: RNCC: 2 | RNVC: 2
0900200301: RNCC: 3 | RNVC: 2
900-200D: RNCC: 3 | RNVC: 2
0900200304: RNCC: 3 | RNVC: 2
101-DX-200: RNCC: 3 | RNVC: 2
0714 61 11: RNCC: 5 | RNVC: 2
101D0UCE200: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-201-0471
Hand Reamer

142010471
R607-12X14: RNCC: 3 | RNVC: 2
3090-12-14: RNCC: 5 | RNVC: 2
30-01-12A14: RNCC: 5 | RNVC: 9
1-14-12A14: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-33-204-3826
Pocket Knife

332043826
282.1720: RNCC: 3 | RNVC: 2
GRAN MONTANERO: RNCC: 5 | RNVC: 2

30 Aug 2005

5110-15-074-6032
Hand File

150746032
2-1-2D200UNI5500: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-053-5031
Hand Wire Stripper

150535031
45-092: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-362-6845
Hand Reamer

143626845
9970-125-185: RNCC: 3 | RNVC: 2

19 Mar 1980

5110-15-074-6309
Hand Reamer

150746309
15UNI525ACCLEGUTENS: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-438-9582
Hand Reamer

144389582
330A97-2102-26: RNCC: 3 | RNVC: 2

11 Apr 1990

5110-33-192-5296
Back Saw

331925296
8831.014: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-14-271-5961
Hand Reamer

142715961
E74111-17-5FS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-15-202-8648
Hand Wire Stripper

152028648
78318: RNCC: 3 | RNVC: 2
(241)AG41278318: RNCC: 5 | RNVC: 2

27 Aug 2007

5110-14-522-1979
Pocket Knife

145221979
10VRN: RNCC: 3 | RNVC: 2

10 Oct 2000

5110-15-074-6929
Firmer Chisel

150746929
26ART106CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-528-9344
Smooth Plane

145289344
1-12-003: RNCC: 3 | RNVC: 2
5000366120034: RNCC: 5 | RNVC: 2
SYQ0860: RNCC: 5 | RNVC: 2
1-12-003-9: RNCC: 5 | RNVC: 2

27 Feb 2002

5110-14-218-4253
Hand File

142184253
E75-001TRIANGULAIREBATARDE200: RNCC: 2 | RNVC: 2
0912200104: RNCC: 3 | RNVC: 2
112-BAT-200: RNCC: 3 | RNVC: 2
0912200101: RNCC: 3 | RNVC: 2
912-200B: RNCC: 3 | RNVC: 2

1 Jan 1965

5110-15-074-6013
Hand File

150746013
150UNI5515: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-018-8551
Corner Bit Brace

270188551
901-GK-19F: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-256-7144
Pocket Knife

142567144
NO PRIMARY REF14-256-7144: RNCC: 3 | RNVC: 2
DES1-205: RNCC: 5 | RNVC: 9

1 Jan 1969

5110-14-550-4205
Bolt Cutter

145504205
3148512174202: RNCC: 3 | RNVC: 2
990.A3: RNCC: 3 | RNVC: 2
990.A3: RNCC: 5 | RNVC: 2

20 Jun 2006

5110-15-074-9024
Hand Reamer

150749024
23UNI525ACCSUPER: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6059
Hand File

150746059
200UNI5506: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-417-8474
Hand File

144178474
904-250D: RNCC: 3 | RNVC: 2

29 Jul 1987

5110-14-204-9393
Hand Hacksaw Frame

142049393
F76-021-620MM: RNCC: 2 | RNVC: 2

1 Jan 1963

5110-15-188-5337
Chisel Bar

151885337
MK182: RNCC: 3 | RNVC: 2
(241)AF120MK182: RNCC: 5 | RNVC: 2

5 Oct 2009

5110-14-280-9753
Hand Reamer

142809753
E74108D23RS: RNCC: 2 | RNVC: 1

1 Jan 1971

5110-27-022-3621
Turning Chisel

270223621
10131MK1410: RNCC: 2 | RNVC: 1

27 Feb 2004

5110-33-161-6848
Hand Bench Shears

331616848
42.54: RNCC: 2 | RNVC: 2

24 Jul 1995

5110-39-000-3288
Single Bit Ax

390003288
CLOG H000000000329: RNCC: 2 | RNVC: 2
TOPOR PENTRU LEMNE: RNCC: 5 | RNVC: 2

3 Jun 2003

5110-33-201-0322
Single Bit Ax

332010322
5110001174: RNCC: 3 | RNVC: 2
5110001174: RNCC: 5 | RNVC: 2

23 Apr 2002

5110-15-074-5953
Hand File

150745953
3D140UNI5670: RNCC: 2 | RNVC: 2
D140UNI5670: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-370-1176
Hand File

143701176
PAM.D200EM: RNCC: 3 | RNVC: 2
102005: RNCC: 5 | RNVC: 2
3148516508805: RNCC: 5 | RNVC: 2
PAMD200EM: RNCC: 5 | RNVC: 2
0650880: RNCC: 5 | RNVC: 9

18 May 1981

5110-15-074-5866
Hand File

150745866
1-2D150UNI5489: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-370-1181
Hand File

143701181
PANMD250EM: RNCC: 3 | RNVC: 2
102014: RNCC: 5 | RNVC: 2

18 May 1981

5110-33-103-9185
Hand File

331039185
352.832: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-27-044-9632
Pipe Cutter

270449632
120-190: RNCC: 2 | RNVC: 1
I20-190: RNCC: 2 | RNVC: 1

23 Mar 2009

5110-15-074-6662
Hand Reamer

150746662
5UNI532ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-163-5107
Corner Bit Brace

151635107
(241)A4444TK9096: RNCC: 3 | RNVC: 2
TK 9096: RNCC: 3 | RNVC: 2

2 Oct 2002

5110-27-029-3118
Corner Bit Brace

270293118
2ABMK02203: RNCC: 2 | RNVC: 1

20 Mar 2006

5110-27-013-3756
Hand Wire Stripper

270133756
8098-160JC: RNCC: 2 | RNVC: 1
04021904642: RNCC: 2 | RNVC: 1

10 Jun 2002

5110-33-000-1544
Pocket Knife

330001544
282100: RNCC: 3 | RNVC: 2

12 Nov 1986

5110-15-074-6278
Hand Reamer

150746278
22UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-002-3437
Hand Drill

150023437
60210588: RNCC: 3 | RNVC: 2

13 Aug 2013

5110-33-104-1844
Scraping Knife

331041844
CUCHILLETE DE EMPALMADOR: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-14-326-1094
Hand Reamer

143261094
E74112-13RS: RNCC: 2 | RNVC: 2

2 Jul 1975

5110-14-249-8211
Hand Cold Chisel

142498211
M0B29-140: RNCC: 3 | RNVC: 2
2116: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-15-196-9890
Hand File

151969890
PN UAS 00031345: RNCC: 3 | RNVC: 2
5110F76027528: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-165-8751
Pipe Cutter

151658751
313202: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-418-1693
Hand File

144181693
AIGOV100T2: RNCC: 3 | RNVC: 2
3148516313409: RNCC: 5 | RNVC: 2

6 Aug 1987

5110-15-074-6608
Hand Reamer

150746608
1-5UNI531ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-156-5743
Bow Saw

331565743
390.012: RNCC: 3 | RNVC: 2

29 Aug 1996

5110-15-199-0803
Hand File

151990803
2600/2-12: RNCC: 3 | RNVC: 2
D2600/2-12: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-27-010-7979
Double Bit Ax

270107979
99999-NIIN-DA0040295: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-14-273-7490
Hand Reamer

142737490
E74103-35RS: RNCC: 2 | RNVC: 2
1080-35: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-271-5958
Hand Reamer

142715958
E74111-15-5FS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-14-249-9390
Hand Reamer

142499390
E66003A9-5HS: RNCC: 2 | RNVC: 2
3088-9-5: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-14-273-7464
Hand Reamer

142737464
E74103-6-5RS: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-15-000-2051
Ratchet Bit Brace

150002051
1171401: RNCC: 3 | RNVC: 2

8 Feb 2013

5110-15-180-2698
Hand File

151802698
1718A8/P: RNCC: 3 | RNVC: 2
(241)A08731718A8/P: RNCC: 3 | RNVC: 2

7 Apr 2008

5110-27-018-8131
Corner Bit Brace

270188131
901-TS-262: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-244-0923
Hand Reamer

142440923
NF E 66-003/12,5: RNCC: 2 | RNVC: 2
8040101-12,5: RNCC: 3 | RNVC: 2
E66003-12,5: RNCC: 5 | RNVC: 2
E74104-12-5FS: RNCC: 5 | RNVC: 2
TKF8040101-12,5: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-14-271-5902
Hand Reamer

142715902
E74111-39RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-074-6694
Hand Reamer

150746694
45-75UNI535ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6464
Hand Reamer

150746464
44UNI525TAGLIENTIELICACCLEGUTEN-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-6936
Firmer Chisel

150746936
8ART108: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-393-0331
Hand File

143930331
AIGTRI160T2: RNCC: 3 | RNVC: 2
3148516319005: RNCC: 5 | RNVC: 2

12 Apr 1984

5110-14-541-3259
Hand File

145413259
TRI.MD250: RNCC: 3 | RNVC: 2
TRI-MD250: RNCC: 5 | RNVC: 2

27 May 2004

5110-15-074-6302
Hand Reamer

150746302
8UNI525ACCLEGUTENS: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-197-1697
Poising Saw

151971697
PN UAS 00036528: RNCC: 3 | RNVC: 2
3419F76030697: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-197-1682
Nested Saws

151971682
PN UAS 00044819: RNCC: 3 | RNVC: 2
5120F76036804: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-074-5954
Hand File

150745954
31-2D160UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-068-3925
Hand Reamer

150683925
12000-12: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-14-300-9044
Bow Saw

143009044
R8024301: RNCC: 3 | RNVC: 2
R802-43: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-15-188-9044
Hand Reamer

151889044
7738-6.35: RNCC: 3 | RNVC: 2
(241)A03027738-6.35: RNCC: 5 | RNVC: 2

11 Dec 2009

5110-15-074-6643
Hand Reamer

150746643
25UNI532ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-298-7832
Rip Hand Saw

142987832
NO PRIMARY REF14-298-7832: RNCC: 3 | RNVC: 2
311LI0N45: RNCC: 5 | RNVC: 2
C328-50: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-15-074-5963
Hand File

150745963
8D160UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6089
Hand File

150746089
10INART102D0LCEB: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-271-5884
Hand Reamer

142715884
E74111-5RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-472-3904
Hand File

144723904
850.S350: RNCC: 3 | RNVC: 2
3148512079408: RNCC: 5 | RNVC: 2
850S350: RNCC: 5 | RNVC: 2
850.S 350: RNCC: 5 | RNVC: 2
0207940: RNCC: 5 | RNVC: 9

19 Oct 1994

5110-14-370-1106
Hand File Set

143701106
AS12LBC100T2: RNCC: 3 | RNVC: 2
130039: RNCC: 5 | RNVC: 2

18 May 1981

5110-15-074-6433
Hand Reamer

150746433
5UNI525TAGLIENTIELICACCLEGUTENS-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-195-0980
Hand File Set

151950980
1719 BM D8/S5: RNCC: 3 | RNVC: 2
(241)A08731719BMD8/S5: RNCC: 5 | RNVC: 2

25 Feb 2011

5110-14-437-7130
Hand Reamer

144377130
E74112-33-5RS: RNCC: 2 | RNVC: 2

14 Feb 1990

5110-14-488-5316
Hand Reamer

144885316
E74112-8-3RS: RNCC: 2 | RNVC: 2
F-P-8,3: RNCC: 3 | RNVC: 2
164-8,3: RNCC: 3 | RNVC: 2
FP8-3: RNCC: 5 | RNVC: 2
164-8-3: RNCC: 5 | RNVC: 2

15 May 1997

5110-15-050-9067
Hand File

150509067
1-2D200UNI5493B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-274-8088
Hand File

142748088
2401-180-2: RNCC: 3 | RNVC: 2
680-180-2: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-14-411-5067
Hand Reamer

144115067
E66011-5JUIL1976HSS: RNCC: 2 | RNVC: 2
176-01-5: RNCC: 3 | RNVC: 2

6 Aug 1986

5110-15-136-2741
Hand Drill

151362741
1081-10: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-074-6071
Hand File

150746071
14INART101MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-271-6146
Hand File

142716146
E75001LB100B: RNCC: 2 | RNVC: 2
0906100204: RNCC: 3 | RNVC: 2
102-MID-100: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-14-271-5918
Hand Reamer

142715918
E74111-15-5RS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-15-105-5029
Broad Hatchet

151055029
1500/IC/III-08.09.58-53: RNCC: 3 | RNVC: 2

30 May 1989

5110-14-270-3926
Hand Reamer

142703926
E66011A3-5RN: RNCC: 2 | RNVC: 1
30-05-3-5: RNCC: 5 | RNVC: 9
1140-3-5: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-15-154-4926
Hand Cold Chisel

151544926
A1001924: RNCC: 3 | RNVC: 2

20 Jun 2001

5110-14-271-5938
Hand Reamer

142715938
E74111-20FS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-33-107-6626
Hand File

331076626
4003-250-ENTREFINA: RNCC: 3 | RNVC: 2
DIN 7261/E250-2: RNCC: 4 | RNVC: 1
5110000087: RNCC: 5 | RNVC: 2

17 Apr 2000

5110-14-270-3932
Hand Reamer

142703932
E66011A7RN: RNCC: 2 | RNVC: 1
D7601.070: RNCC: 3 | RNVC: 2
8040061-7: RNCC: 3 | RNVC: 2
703CO7: RNCC: 3 | RNVC: 2
1AH16020: RNCC: 3 | RNVC: 2
SYQ1956: RNCC: 5 | RNVC: 2
30-05-7: RNCC: 5 | RNVC: 9
1140-7: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-15-074-5833
Hand File

150745833
B100UNI5494B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-3298
Hand File

150743298
D300UNI5488: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-412-5185
Hand Wire Stripper

144125185
165.1: RNCC: 3 | RNVC: 2
165-1: RNCC: 5 | RNVC: 2
3148511393307: RNCC: 5 | RNVC: 2
91639867: RNCC: 5 | RNVC: 2
0139330: RNCC: 5 | RNVC: 9

15 Oct 1986

5110-15-068-3923
Hand Reamer

150683923
12000-11: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-14-285-4787
Jeweler's Saw Blade

142854787
NO PRIMARY REF14-285-4787: RNCC: 3 | RNVC: 2
M0: RNCC: 5 | RNVC: 2

1 Jan 1972

5110-33-106-9731
Hand File

331069731
BL 4005-150: RNCC: 3 | RNVC: 2

3 Jun 1999

5110-33-103-9225
Hand File

331039225
360.452: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-485-3953
Rivet Cutter

144853953
60-004-010: RNCC: 3 | RNVC: 2
RB2016-6: RNCC: 5 | RNVC: 2
RB2016 60.004.010: RNCC: 5 | RNVC: 2

23 Jan 1997

5110-15-074-6209
Hand Rasp

150746209
1-2D150UNI5523: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-271-6040
Hand File

142716040
E75001LC350A: RNCC: 2 | RNVC: 2
0910350104: RNCC: 3 | RNVC: 2
0910350101: RNCC: 3 | RNVC: 2
910-350B: RNCC: 3 | RNVC: 2
DRD.B350: RNCC: 3 | RNVC: 2
109-BA-350: RNCC: 3 | RNVC: 2
5013135: RNCC: 5 | RNVC: 2
3148516020703: RNCC: 5 | RNVC: 2
DRDB350: RNCC: 5 | RNVC: 2
0602070: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-15-074-6901
Hand Cold Chisel

150746901
400-20ART42410: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-404-8315
Hand File

144048315
PILMD250: RNCC: 3 | RNVC: 2

20 Nov 1985

5110-14-366-4844
Bolt Cutter

143664844
NO PRIMARY REF14-366-4844: RNCC: 3 | RNVC: 2
188-3: RNCC: 5 | RNVC: 9

20 Nov 1980

5110-14-429-3065
Hand Reamer

144293065
853-600-073-0: RNCC: 3 | RNVC: 2

11 Jan 1989

5110-14-244-3710
Hand Reamer

142443710
E74111-32FS: RNCC: 2 | RNVC: 2

1 Jan 1968

5110-15-074-6204
Hand Rasp

150746204
B200UNI5523: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-488-9737
Brick Chisel

144889737
1265.30: RNCC: 3 | RNVC: 2
3148512259909: RNCC: 5 | RNVC: 2
300-6376: RNCC: 5 | RNVC: 2
0714 63 11: RNCC: 5 | RNVC: 2
FACOM1265.30: RNCC: 5 | RNVC: 2
0225990: RNCC: 5 | RNVC: 9

18 Jun 1997

5110-14-201-5361
Hand Cold Chisel

142015361
M0B29-200: RNCC: 3 | RNVC: 2
131017: RNCC: 5 | RNVC: 2
91616438: RNCC: 5 | RNVC: 2

1 Jan 1962

5110-33-106-1213
Hand File

331061213
402902: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-14-516-6522
Broad Hatchet

145166522
HACHETTE MANCHE SATER NGO0-48700: RNCC: 2 | RNVC: 2

8 Oct 1999

5110-27-035-2867
Pipe Cutter

270352867
CH-127: RNCC: 2 | RNVC: 1

7 Mar 2007

5110-15-050-9081
Hand File

150509081
B300UNI5492B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-532-9621
Hand File

145329621
TRO.4: RNCC: 3 | RNVC: 2
3148516231703: RNCC: 5 | RNVC: 2

14 Jan 2003

5110-15-180-2691
Hand File

151802691
(241)A08731718A4/Q: RNCC: 3 | RNVC: 2
1718A4/Q: RNCC: 3 | RNVC: 2

7 Apr 2008

5110-15-204-6839
Hand File Set

152046839
D26452160: RNCC: 3 | RNVC: 2
(241)A0302D26452160: RNCC: 5 | RNVC: 2

9 Dec 2011

5110-15-074-6522
Hand Reamer

150746522
18UNI525TAGLIENTIELICACCSUPERRA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-27-057-2339
Pipe Cutter

270572339
6850280322: RNCC: 2 | RNVC: 1

9 Jul 2012

5110-27-022-2567
Corner Bit Brace

270222567
901-DI-29: RNCC: 2 | RNVC: 1

20 Feb 2004

5110-27-053-6494
Corner Bit Brace

270536494
10121MA0217: RNCC: 2 | RNVC: 1

31 May 2011

5110-15-068-3936
Hand Reamer

150683936
12000-23: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-14-371-9157
Hand Reamer

143719157
E66017 CM2 QUEUE CYLINDRIQUE: RNCC: 2 | RNVC: 2
20400-2: RNCC: 3 | RNVC: 2

5 Aug 1981

5110-14-502-0280
Scraper Blade

145020280
92.1038.00.00.00.10: RNCC: 3 | RNVC: 9

25 Nov 1997

5110-14-264-4798
Hand Reamer

142644798
E74104-38-5FS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-33-103-9069
Hand File

331039069
350.081: RNCC: 3 | RNVC: 2

21 Jun 1995

5110-27-018-6204
Hand Cold Chisel

270186204
5110-15924-00005: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-33-155-1299
Hand File

331551299
LIMA TRIANGULAR SEMI-FINA 7": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-15-054-4820
Hand Hacksaw Blade

150544820
2506G: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-33-103-9196
Hand File

331039196
359.960: RNCC: 3 | RNVC: 2

22 Nov 1996

5110-15-074-6122
Hand File

150746122
16INART103D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-197-1700
Poising Saw

151971700
PN UAS 00038980: RNCC: 3 | RNVC: 2
5120F76033257: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-33-192-5292
Keyhole Saw

331925292
8822.012: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-33-103-9101
Hand File

331039101
350.271: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-15-074-5862
Hand File

150745862
B350UNI5489: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6887
Hand Cold Chisel

150746887
175-10FIG26: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-270-3934
Hand Reamer

142703934
E66011A9RN: RNCC: 2 | RNVC: 1
1AH16028: RNCC: 3 | RNVC: 2
D7601.090: RNCC: 3 | RNVC: 2
8040061-9: RNCC: 3 | RNVC: 2
703CO9: RNCC: 3 | RNVC: 2
SYQ1958: RNCC: 5 | RNVC: 2
30-05-9: RNCC: 5 | RNVC: 9
1140-9: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-15-199-0864
Chisel Bar

151990864
3609-200: RNCC: 3 | RNVC: 2
C3609-200: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-379-3652
Pocket Knife

143793652
004437005S: RNCC: 3 | RNVC: 2

1 Oct 1982

5110-14-271-6025
Hand File

142716025
E75001LB300B: RNCC: 2 | RNVC: 2
0906300204: RNCC: 3 | RNVC: 2
102-MID-300: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-14-442-5246
Hand Reamer

144425246
J4970-4A: RNCC: 3 | RNVC: 9
AEDJ4970-4A: RNCC: 5 | RNVC: 9

17 Oct 1990

5110-14-281-1958
Hand Reamer

142811958
E74112-5RS: RNCC: 2 | RNVC: 2
F-P-5: RNCC: 3 | RNVC: 2
164-5: RNCC: 3 | RNVC: 2
FP5: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-15-050-9100
Hand File

150509100
B300UNI5501: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-074-6605
Hand Reamer

150746605
0-6UNI531ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-158-4664
End Cutting Nippers

151584664
188051: RNCC: 3 | RNVC: 2
(241)A1572188051: RNCC: 5 | RNVC: 2
DA188051: RNCC: 5 | RNVC: 2

19 Feb 2004

5110-14-276-3229
Hand Reamer

142763229
E74112-60RS: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-14-339-1453
Hand File

143391453
LP1840-4-2: RNCC: 3 | RNVC: 2
1840-100-2: RNCC: 5 | RNVC: 2

17 Dec 1976

5110-14-249-9382
Hand Reamer

142499382
E66003A12-5HS: RNCC: 2 | RNVC: 2
3088-12-5: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-14-276-8611
Hand File

142768611
2403-140-4: RNCC: 3 | RNVC: 2
4479-140-4: RNCC: 3 | RNVC: 2
1558: RNCC: 5 | RNVC: 2
85-684-9840: RNCC: 6 | RNVC: 9

1 Jan 1971

5110-33-156-5760
Scraper Blade

331565760
790.230: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-14-264-3240
Gimlet

142643240
390-2: RNCC: 3 | RNVC: 2
381-08-2: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-27-035-2869
Pipe Cutter

270352869
CH-312: RNCC: 2 | RNVC: 1

7 Mar 2007

5110-15-074-6185
Hand File

150746185
260-2628AMEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-507-5791
Hand File

145075791
RD.B150EM: RNCC: 3 | RNVC: 2

23 Jul 1998

5110-14-270-3999
Hand Reamer

142703999
E74104-46RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-276-8003
Hand Reamer

142768003
R607-60X75: RNCC: 3 | RNVC: 2
3090-60-75: RNCC: 3 | RNVC: 9
30-01-60A75: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-449-0823
Hand File

144490823
103-MD-250: RNCC: 3 | RNVC: 2

24 Jul 1991

5110-15-074-6065
Hand File

150746065
12INART101BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-103-9163
Hand Rasp

331039163
351.372: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-201-3114
Bearing Scraper

142013114
50103: RNCC: 3 | RNVC: 2
501-3: RNCC: 5 | RNVC: 2
1540-250: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-15-074-5919
Hand File

150745919
D300UNI5495: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-005-4265
Pocket Knife

330054265
2.57.0040: RNCC: 3 | RNVC: 2

23 Jul 2001

5110-14-276-3225
Hand Reamer

142763225
E74112-45RS: RNCC: 2 | RNVC: 2
R601-45RS: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-14-235-4106
Hand Reamer

142354106
E66012A5-5RS: RNCC: 2 | RNVC: 2

1 Jan 1967

5110-14-377-2345
Hand File

143772345
PAM MD 150 EM: RNCC: 3 | RNVC: 2
0650790: RNCC: 5 | RNVC: 2
3148516507907: RNCC: 5 | RNVC: 2
PAMMD150EM: RNCC: 5 | RNVC: 2
91481358: RNCC: 5 | RNVC: 2

17 May 1982

5110-27-010-7976
Double Bit Ax

270107976
99999-NIIN-DA0037638: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-14-528-8125
Hand Hacksaw Blade

145288125
666A.12: RNCC: 3 | RNVC: 2
SYQ0817: RNCC: 5 | RNVC: 2
0192039: RNCC: 5 | RNVC: 2

18 Feb 2002

5110-14-379-1228
Hand Reamer

143791228
14231-42380: RNCC: 3 | RNVC: 2

6 Sep 1982

5110-14-529-9331
Pocket Knife

145299331
08383-3: RNCC: 3 | RNVC: 2

22 Apr 2002

5110-14-206-8262
Hand Hacksaw Blade

142068262
E73-071-500X13X0-65: RNCC: 2 | RNVC: 2

1 Jan 1964

5110-14-274-8378
Hand File

142748378
936-250MID0UCE: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-14-274-8080
Hand File

142748080
2410-180-0: RNCC: 3 | RNVC: 2
687-180-0: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-15-074-6852
Hand Cape Chisel

150746852
150-6ART3616: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-108-0092
Hand Cold Chisel

331080092
74050-150: RNCC: 3 | RNVC: 2

27 Nov 2000

5110-15-196-9874
Hand File

151969874
PN UAS 00047209: RNCC: 3 | RNVC: 2
5110F76037950: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-280-9748
Hand Reamer

142809748
E74108C15RS: RNCC: 2 | RNVC: 1

1 Jan 1971

5110-33-201-3002
Hand Reamer

332013002
5110001153: RNCC: 3 | RNVC: 2

20 Jun 2002

5110-15-179-6091
Bolt Cutter Jaws

151796091
20840: RNCC: 3 | RNVC: 2
00.19.31.88: RNCC: 5 | RNVC: 2

11 Apr 2007

5110-14-512-0540
Hand File

145120540
NO PRIMARY REF14-512-0540: RNCC: 3 | RNVC: 2
PAM-200: RNCC: 5 | RNVC: 9
PAM200: RNCC: 5 | RNVC: 9

3 Feb 1999

5110-14-274-8362
Hand File

142748362
E75-002FENDANTE200DEMID0UCE: RNCC: 2 | RNVC: 2
117-MID-200: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-27-034-7683
Hand Drill

270347683
8434DWAE: RNCC: 5 | RNVC: 9

7 Feb 2007

5110-15-074-6969
Firmer Chisel

150746969
28ART109: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-103-9115
Hand File

331039115
350.453: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-15-050-6064
Hand File

150506064
1-2D250UNI5502B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-350-5380
Hand File

143505380
525219: RNCC: 3 | RNVC: 2

12 Jul 1978

5110-14-507-5792
Hand Rasp

145075792
RAB.DRDMD250+MAN.1: RNCC: 3 | RNVC: 2

23 Jul 1998

5110-15-074-6920
Firmer Chisel

150746920
4ART106CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-116-9313
Hand File

151169313
9532-006: RNCC: 3 | RNVC: 2
9532-006: RNCC: 5 | RNVC: 9

28 Jul 1993

5110-14-274-8537
Hand Rasp

142748537
E75001RA350A: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-14-418-1686
Hand File

144181686
AIGCRO100T2: RNCC: 3 | RNVC: 2
3148516312808: RNCC: 5 | RNVC: 2

6 Aug 1987

5110-14-238-5457
Hand Reamer

142385457
E66012A6RS: RNCC: 2 | RNVC: 2

1 Jan 1967

5110-14-545-2732
Brick Chisel

145452732
140-1-P: RNCC: 3 | RNVC: 2

31 Mar 2005

5110-14-283-6124
Hand File Set

142836124
7273 DEMI-DOUCE: RNCC: 3 | RNVC: 2
3086: RNCC: 5 | RNVC: 2

1 Jan 1972

5110-15-074-6723
Hand Reamer

150746723
14UNI538ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-7022
Turning Chisel

150747022
6ART102CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-103-9231
Hand File

331039231
360.632: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-273-7496
Hand Reamer

142737496
E74103-45RS: RNCC: 2 | RNVC: 2
1080-45: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-165-4200
Pipe Cutter

151654200
623150: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-27-022-3612
Turning Chisel

270223612
10131MK1409: RNCC: 2 | RNVC: 1

27 Feb 2004

5110-15-155-6079
Hand Cold Chisel

151556079
SCA.P. 200X22: RNCC: 3 | RNVC: 2
(241)A5682SCA.P.200X22: RNCC: 3 | RNVC: 2

30 Apr 2002

5110-15-074-3259
Hand File

150743259
B350UNI5487B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6955
Firmer Chisel

150746955
16ART109: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-205-0509
Nested Saws

152050509
49401660: RNCC: 3 | RNVC: 2
49401660: RNCC: 3 | RNVC: 2
(241)A415549401660: RNCC: 5 | RNVC: 2

15 Feb 2012

5110-14-383-8653
Hand Reamer

143838653
F-P-2,2: RNCC: 3 | RNVC: 2
F-P-2-2: RNCC: 3 | RNVC: 2
164-2-2: RNCC: 3 | RNVC: 2

11 Apr 1983

5110-33-155-1300
Hand File

331551300
LIMA TRIANGULAR BASTA 10": RNCC: 3 | RNVC: 2
419603: RNCC: 5 | RNVC: 2

29 Jun 1996

5110-14-210-5451
Hand File

142105451
E75001LE150C: RNCC: 2 | RNVC: 2
TRI150: RNCC: 3 | RNVC: 2
0912150301: RNCC: 3 | RNVC: 2
912-150D: RNCC: 3 | RNVC: 2
0912150304: RNCC: 3 | RNVC: 2
112-DX-150: RNCC: 3 | RNVC: 2

1 Jan 1964

5110-15-074-6311
Hand Reamer

150746311
17UNI525ACCLEGUTENS: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6118
Hand File

150746118
8INART103D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-274-7988
Woodcarving Gouge

142747988
E73-201G0UGEBISEAUEXTERIEUR20: RNCC: 2 | RNVC: 2
4600-20: RNCC: 3 | RNVC: 9
867-20: RNCC: 5 | RNVC: 2
867-2LI0NS20: RNCC: 5 | RNVC: 2
867-20: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-33-155-1107
Hand File

331551107
LIMA CUADRADA S/FINA 4": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-15-074-6270
Hand Reamer

150746270
14UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-200-2624
Pocket Knife

332002624
2.57.040: RNCC: 3 | RNVC: 2

21 Nov 2001

5110-15-050-9066
Hand File

150509066
D150UNI5493B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-126-0382
Hand Drill

151260382
BOSCH 18.2: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-541-3255
Hand Rasp

145413255
RAB.PMD300: RNCC: 3 | RNVC: 2

27 May 2004

5110-15-179-1871
Crosscut Hand Saw

151791871
1-15-289: RNCC: 3 | RNVC: 2
02.13.33.90: RNCC: 5 | RNVC: 2

13 Jun 2006

5110-33-158-6402
Bolt Cutter

331586402
4880.089: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-074-5981
Hand File

150745981
1GUNI5569: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6266
Hand Reamer

150746266
10UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-271-5900
Hand Reamer

142715900
E74111-33RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-271-5919
Hand Reamer

142715919
E74111-16-5RS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-15-174-7217
Hand Hacksaw Frame

151747217
200: RNCC: 3 | RNVC: 2

2 Oct 2003

5110-15-204-6881
Bolt Cutter

152046881
MR3536F43: RNCC: 3 | RNVC: 2
(241)AG622MR3536F43: RNCC: 5 | RNVC: 2

12 Dec 2011

5110-15-194-4578
Drilling Post

151944578
CAV10NA: RNCC: 3 | RNVC: 2
(241)A7135CAV10NA: RNCC: 5 | RNVC: 2

18 Nov 2010

5110-14-313-6274
Hand File

143136274
350MM25-4: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-074-6074
Hand File

150746074
10INART101D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-5837
Hand File

150745837
B250UNI5494: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-394-4113
Hand File

143944113
E75001LF125B: RNCC: 2 | RNVC: 2
RDMD125: RNCC: 3 | RNVC: 2
3148516040008: RNCC: 5 | RNVC: 2

28 Aug 1984

5110-15-074-5974
Hand File

150745974
10 1-2D160UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5828
Hand File

150745828
D200UNI5493B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6107
Hand File

150746107
16INART104D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-103-9055
Hand File

331039055
350.012: RNCC: 3 | RNVC: 2

21 Jun 1995

5110-14-298-7820
Bow Saw

142987820
NO PRIMARY REF14-298-7820: RNCC: 3 | RNVC: 2
244-80-6174: RNCC: 5 | RNVC: 2
245-6394-80: RNCC: 5 | RNVC: 2
245639480: RNCC: 5 | RNVC: 9
244-80-6174: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-33-005-4424
Hand Hacksaw Frame

330054424
390.014: RNCC: 3 | RNVC: 2

25 Jul 2001

5110-14-430-1022
Hand File

144301022
DRD.B250: RNCC: 3 | RNVC: 2
3148516020109: RNCC: 5 | RNVC: 2
DRDB250: RNCC: 5 | RNVC: 2
0714 61 35: RNCC: 5 | RNVC: 2
0602010: RNCC: 5 | RNVC: 9

1 Mar 1989

5110-33-001-4456
Hatchet Handle

330014456
92026342: RNCC: 3 | RNVC: 2

12 Mar 1997

5110-15-176-2400
Breast Drill

151762400
EX5110RN0401827: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-074-7438
Firmer Gouge

150747438
16-32UNI4000ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-103-9130
Hand File

331039130
350.653: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-14-280-1827
Hand File

142801827
E75001LM150B: RNCC: 2 | RNVC: 1

1 Jan 1971

5110-14-285-4791
Jeweler's Saw Blade

142854791
NO PRIMARY REF14-285-4791: RNCC: 3 | RNVC: 2
M4: RNCC: 5 | RNVC: 2

1 Jan 1972

5110-15-074-6853
Hand Cape Chisel

150746853
200-8ART3616: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6265
Hand Reamer

150746265
9UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-9036
Hand Reamer

150749036
42UNI525ACCSUPER: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-106-1215
Hand File

331061215
408904: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-33-201-6112
Bolt Cutter

332016112
319697: RNCC: 3 | RNVC: 2

9 Sep 2002

5110-33-103-9141
Hand Rasp

331039141
351.161: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-33-200-1620
Hand Hacksaw Frame

332001620
1377.016: RNCC: 3 | RNVC: 2

26 Oct 2001

5110-33-106-1211
Hand File

331061211
402100: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-14-371-9155
Hand Reamer

143719155
E66017 CM0 QUEUE CYLINDRIQUE: RNCC: 2 | RNVC: 2
20400-0: RNCC: 3 | RNVC: 2

5 Aug 1981

5110-15-074-6592
Hand Reamer

150746592
0-8UNI531ACCCARBSPECUTENS: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5937
Hand File

150745937
1D140UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-497-2764
Crosscut Hand Saw

144972764
6331450001: RNCC: 3 | RNVC: 2
1-15-357-0: RNCC: 5 | RNVC: 9
F300 0T 022 9304: RNCC: 6 | RNVC: 9

15 Oct 1997

5110-33-103-9094
Hand File

331039094
902.00630: RNCC: 3 | RNVC: 2
350.233: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-14-270-3947
Hand Reamer

142703947
E66011A13RN: RNCC: 2 | RNVC: 1
30-05-13: RNCC: 5 | RNVC: 9
1140-13: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-14-271-5936
Hand Reamer

142715936
E74111-16FS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-342-5325
Hand Drill

143425325
055W02-519958E: RNCC: 3 | RNVC: 2
0519958E00: RNCC: 5 | RNVC: 2

16 May 1977

5110-27-057-5867
Docking Hand Saw

270575867
BLITZ7: RNCC: 2 | RNVC: 1
BLITZ7: RNCC: 2 | RNVC: 2

7 Sep 2012

5110-15-074-6683
Hand Reamer

150746683
23-45UNI535ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-103-9104
Hand File

331039104
350.281: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-15-074-6567
Hand Reamer

150746567
2UNI524ACCIAI0ALCARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6942
Firmer Chisel

150746942
18ART108: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-103-9119
Hand File

331039119
905.01210: RNCC: 3 | RNVC: 2
350.471: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-15-074-6932
Firmer Chisel

150746932
35ART106CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-9025
Hand Reamer

150749025
24UNI525ACCSUPER: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-212-8985
Hand Wire Stripper

142128985
04010002000: RNCC: 3 | RNVC: 2
401-02: RNCC: 5 | RNVC: 2
4010-2: RNCC: 5 | RNVC: 2
401002-00: RNCC: 5 | RNVC: 2
0715 01 02: RNCC: 5 | RNVC: 2
3597470078365: RNCC: 5 | RNVC: 2
SES: RNCC: 5 | RNVC: 9
85-688-7523: RNCC: 6 | RNVC: 9

1 Jan 1964

5110-14-549-4385
Hand File

145494385
AIG.CAR180T2: RNCC: 3 | RNVC: 2

4 Apr 2006

5110-33-103-9071
Hand File

331039071
350.111: RNCC: 3 | RNVC: 2

21 Jun 1995

5110-14-338-3100
Woodcarving Gouge

143383100
E73-201G0UGEBISEAUINTERIEUR15: RNCC: 2 | RNVC: 2

6 Nov 1976

5110-27-024-3809
Hand Cold Chisel

270243809
05001FK0209: RNCC: 2 | RNVC: 1

19 Oct 2004

5110-33-155-9490
Hand Graver

331559490
DIN 6453: RNCC: 2 | RNVC: 2
50510: RNCC: 3 | RNVC: 2
312.250: RNCC: 3 | RNVC: 2
5212.025: RNCC: 3 | RNVC: 2
8735.02500: RNCC: 5 | RNVC: 2

9 Jan 1991

5110-15-074-5893
Hand File

150745893
1-2D250UNI5492: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-214-6298
Hand Graver

152146298
32-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-032-3467
Hand Rasp

140323467
2.21.122: RNCC: 3 | RNVC: 2

1 Mar 1984

5110-15-054-4809
Crosscut Hand Saw

150544809
5447: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-074-5820
Hand File

150745820
1-2D200UNI5493: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6224
Hand Rasp

150746224
1-2D400UNI5521: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-192-5298
Back Saw

331925298
8841.008: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-074-6934
Firmer Chisel

150746934
4ART108: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6698
Hand Reamer

150746698
17-35UNI535ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-370-1118
Bolt Cutter

143701118
999A1: RNCC: 3 | RNVC: 2
130071: RNCC: 5 | RNVC: 2

18 May 1981

5110-33-192-5287
Docking Hand Saw

331925287
8801.016: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-074-6036
Hand File

150746036
1D200UNI5500: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-188-3331
Hand Rasp

151883331
09900119: RNCC: 3 | RNVC: 2
13047: RNCC: 5 | RNVC: 2
990 M PD: RNCC: 5 | RNVC: 2
391341145509: RNCC: 6 | RNVC: 9

2 Sep 2009

5110-15-074-6704
Hand Reamer

150746704
10-5UNI538ACCIAI0CARB0NI0SPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-103-9093
Hand File

331039093
350.232: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-14-550-5337
Rip Hand Saw

145505337
1-20-010: RNCC: 3 | RNVC: 2

22 Jun 2006

5110-14-383-8659
Hand Reamer

143838659
E74112-28-5RS: RNCC: 2 | RNVC: 2
F-P-28-5: RNCC: 3 | RNVC: 2
164-28-5: RNCC: 3 | RNVC: 2

11 Apr 1983

5110-14-399-4163
File Handle

143994163
MAN.1: RNCC: 3 | RNVC: 2
3148516290809: RNCC: 5 | RNVC: 2
MAN1: RNCC: 5 | RNVC: 2
0714 61 59: RNCC: 5 | RNVC: 2
0629080: RNCC: 5 | RNVC: 9

6 Mar 1985

5110-15-157-5294
Chisel Bar

151575294
80607: RNCC: 3 | RNVC: 2
(241)A473580607: RNCC: 4 | RNVC: 1

18 Sep 2003

5110-33-103-9153
Hand Rasp

331039153
351.263: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-199-0861
Hand Cold Chisel

151990861
3602/2-3: RNCC: 3 | RNVC: 2
C3602/2-3: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-114-4944
Hand File

151144944
C5767107C: RNCC: 3 | RNVC: 2

16 Jun 1992

5110-15-050-6213
Hand File

150506213
D200UNI5495A: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-274-8089
Hand File

142748089
2410-180-2: RNCC: 3 | RNVC: 2
510-0-180: RNCC: 3 | RNVC: 2
687-180-2: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-15-120-9103
File Handle

151209103
STD/04.050: RNCC: 3 | RNVC: 2

4 Sep 1995

5110-15-074-6534
Hand Reamer

150746534
34UNI525TAGLIENTIELICACCSUPERRA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-199-0812
Hand File

151990812
2601/2-10: RNCC: 3 | RNVC: 2
D2601/2-10: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-271-5907
Hand Reamer

142715907
E74111-56RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-055-3613
Hand File

150553613
1-2D125UNI5487B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-055-3610
Hand File

150553610
B125UNI5487B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-074-5976
Hand File

150745976
3GUNI5568A: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-155-9491
Hand Graver

331559491
313.100: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-33-103-9198
Hand File

331039198
360.012: RNCC: 3 | RNVC: 2

13 Dec 1996

5110-15-074-6315
Hand Reamer

150746315
21UNI525ACCLEGUTENS: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6688
Hand Reamer

150746688
5-15UNI535ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-000-0663
Hand Cold Chisel

150000663
348BA-200: RNCC: 3 | RNVC: 2
000340801: RNCC: 5 | RNVC: 2

23 Jan 2013

5110-14-271-5897
Hand Reamer

142715897
E74111-24RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-33-103-8371
Hand File

331038371
5002.001: RNCC: 3 | RNVC: 2

11 Jul 1995

5110-14-451-5121
File Holder

144515121
549020: RNCC: 3 | RNVC: 2

21 Nov 1991

5110-14-541-3842
Smooth Plane

145413842
21144: RNCC: 3 | RNVC: 2

3 Jun 2004

5110-15-055-9121
End Cutting Nippers

150559121
7326512K: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-506-7875
Dimpling Punch

145067875
009421080P: RNCC: 3 | RNVC: 2

18 May 1998

5110-27-024-7387
Hand File Set

270247387
00101506: RNCC: 2 | RNVC: 1
SNF06: RNCC: 2 | RNVC: 1

27 Nov 2004

5110-14-442-2007
Bolt Cutter

144422007
NO PRIMARY REF14-442-2007: RNCC: 3 | RNVC: 2
0219603: RNCC: 5 | RNVC: 2
998.A1: RNCC: 5 | RNVC: 2
998A1: RNCC: 5 | RNVC: 2
91639059: RNCC: 5 | RNVC: 2

3 Oct 1990

5110-15-074-5890
Hand File

150745890
1-2D125UNI5492: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-237-9404
Bearing Scraper

142379404
4455-250: RNCC: 3 | RNVC: 9

1 Jan 1967

5110-14-431-9789
Drilling Post

144319789
00536994: RNCC: 3 | RNVC: 2
536994: RNCC: 5 | RNVC: 2

18 May 1989

5110-15-074-6268
Hand Reamer

150746268
12UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-050-6153
Hand Rasp

150506153
D250UNI5525: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-33-103-9147
Hand Rasp

331039147
351.233: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-244-0926
Hand Reamer

142440926
NF E 66-003/17,5: RNCC: 2 | RNVC: 2
8040101-17,5: RNCC: 3 | RNVC: 2
E66003-17,5: RNCC: 5 | RNVC: 2
E74104-17-5FS: RNCC: 5 | RNVC: 2
TKF8040101-17,5: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-14-274-8291
Hand File

142748291
2401-140-4: RNCC: 3 | RNVC: 2
4473-140-4: RNCC: 3 | RNVC: 2
1554: RNCC: 5 | RNVC: 2
PD140: RNCC: 5 | RNVC: 2
SYQ0914: RNCC: 5 | RNVC: 2
85-684-9100: RNCC: 6 | RNVC: 9

1 Jan 1971

5110-33-005-4300
Block Plane

330054300
5B: RNCC: 3 | RNVC: 2

25 Jul 2001

5110-33-157-1604
Ladies' Scissors

331571604
880.510: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-074-6593
Hand Reamer

150746593
1UNI531ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-529-7315
Knife Blade

145297315
NO PRIMARY REF14-529-7315: RNCC: 3 | RNVC: 2
SYQ1314: RNCC: 5 | RNVC: 2
05020: RNCC: 5 | RNVC: 2

9 Apr 2002

5110-14-532-1793
Bolt Cutter

145321793
997.20: RNCC: 3 | RNVC: 2
3148512195702: RNCC: 5 | RNVC: 2

16 Oct 2002

5110-14-401-8562
Hand Wire Stripper

144018562
174.1: RNCC: 3 | RNVC: 2
3148511403006: RNCC: 5 | RNVC: 2
174-1: RNCC: 5 | RNVC: 2
0140300: RNCC: 5 | RNVC: 9

13 Jun 1985

5110-15-074-6731
Hand Reamer

150746731
10-5UNI538ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-9033
Hand Reamer

150749033
36UNI525ACCSUPER: RNCC: 2 | RNVC: 2

31 Dec 1975

Load More Results