What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 37 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 37of 112

5110-15-197-2085
Pipe Cutter

151972085
PN UAS 00044032: RNCC: 3 | RNVC: 2
3470F76036611: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-419-7422
Hand Reamer

144197422
E74104-10RS: RNCC: 2 | RNVC: 2

5 Nov 1987

5110-15-054-1403
Hand Hacksaw Frame

150541403
2606: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-202-2365
Hand File

142022365
E75001LC300A: RNCC: 2 | RNVC: 2
0910300101: RNCC: 3 | RNVC: 2
910-300B: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-14-424-3489
Hand File

144243489
TRI.B250: RNCC: 3 | RNVC: 2
TRIB250: RNCC: 5 | RNVC: 2
3148516045706: RNCC: 5 | RNVC: 2
0714 61 17: RNCC: 5 | RNVC: 2
0604570: RNCC: 5 | RNVC: 9

19 May 1988

5110-15-050-9112
Hand File

150509112
B300UNI5489A: RNCC: 2 | RNVC: 2
B3600UNI5489A: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-27-019-5143
Hand Drill

270195143
07002YU0012: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-33-103-9091
Hand File

331039091
350.213: RNCC: 3 | RNVC: 2

22 Jun 1995

5110-15-074-6851
Hand Cape Chisel

150746851
125-5ART3616: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-153-3601
Docking Hand Saw

331533601
8891.003: RNCC: 3 | RNVC: 2

29 Aug 1996

5110-14-488-5527
Hand File

144885527
PIL.MD150: RNCC: 3 | RNVC: 2
PILMD150: RNCC: 5 | RNVC: 2
0605290: RNCC: 5 | RNVC: 2
3148516052902: RNCC: 5 | RNVC: 2

21 May 1997

5110-33-106-1227
Hand Rasp

331061227
457209: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-15-074-5980
Hand File

150745980
2GUNI5569: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-197-1272
Chisel Bar

151971272
PN UAS 00043642: RNCC: 3 | RNVC: 2
5120F76035891: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-33-103-9131
Hand File

331039131
350.661: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-27-000-8013
Hand Cold Chisel

270008013
5500 40 0300: RNCC: 2 | RNVC: 1
01080201409: RNCC: 2 | RNVC: 1
5500 40 0300: RNCC: 3 | RNVC: 2

23 Oct 1990

5110-15-199-0990
Rip Hand Saw

151990990
5445/1-600: RNCC: 3 | RNVC: 2
B5445/1-600: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-074-6968
Firmer Chisel

150746968
50ART108: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6854
Hand Cape Chisel

150746854
250-9ART3616: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6317
Hand Reamer

150746317
23UNI525ACCLEGUTENS: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-379-1234
Hand Reamer

143791234
14231-42440: RNCC: 3 | RNVC: 2

6 Sep 1982

5110-15-230-4105
Hand Reamer

152304105
616/1-059: RNCC: 3 | RNVC: 2
513315E074535: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-14-281-5404
Turning Gouge

142815404
108-10EMMANCHE: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-14-288-5692
Hand Wire Stripper

142885692
162: RNCC: 3 | RNVC: 2
SYQ0072: RNCC: 5 | RNVC: 2

1 Jan 1972

5110-14-414-6640
Hand Wire Stripper

144146640
520816S: RNCC: 3 | RNVC: 2

23 Feb 1987

5110-15-074-5897
Hand File

150745897
D100UNI5492B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6019
Hand File

150746019
160UNI5518: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5993
Hand File

150745993
3-250UNI5511: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-237-8734
Pipe Cutter

152378734
2000-A: RNCC: 3 | RNVC: 2
511015E038760: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-074-6321
Hand Reamer

150746321
28UNI525ACCLEGUT: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-271-6054
Hand File

142716054
E75001LG350A: RNCC: 2 | RNVC: 2
0913350101: RNCC: 3 | RNVC: 2
913-350B: RNCC: 3 | RNVC: 2
111-BA-350: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-33-103-9090
Hand File

331039090
350.212: RNCC: 3 | RNVC: 2

22 Jun 1995

5110-15-188-7662
Poising Saw

151887662
MOR3536579: RNCC: 3 | RNVC: 2
(241)AG622MOR3536579: RNCC: 5 | RNVC: 2
01725001: RNCC: 5 | RNVC: 9

13 Nov 2009

5110-14-271-6059
Hand File

142716059
E75001LH100C: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-055-3622
Hand File

150553622
D225UNI5489B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-27-019-5157
Hand Drill

270195157
07002YU0016: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-074-6098
Hand File

150746098
8INART104MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-204-8351
Hand File

142048351
E75001LF400A: RNCC: 2 | RNVC: 2

1 Jan 1963

5110-14-264-4802
Hand Reamer

142644802
E74104-10-5FS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-14-271-5960
Hand Reamer

142715960
E74111-17FS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-33-003-6137
Hand File

330036137
401707: RNCC: 3 | RNVC: 2

25 May 1998

5110-27-050-4351
Adz

270504351
6400250600: RNCC: 2 | RNVC: 9

28 Jul 2010

5110-14-493-6871
Rivet Cutter

144936871
60.004.005: RNCC: 3 | RNVC: 2
RB2016 60.004.005: RNCC: 5 | RNVC: 2

8 Oct 1997

5110-15-180-2693
Hand File

151802693
1718A4/P: RNCC: 3 | RNVC: 2
(241)A08731718A4/P: RNCC: 3 | RNVC: 2

7 Apr 2008

5110-14-271-6062
Hand File

142716062
E75001LH150C: RNCC: 2 | RNVC: 2
LP1263-6-4: RNCC: 5 | RNVC: 2

1 Jan 1970

5110-15-159-3190
Ladies' Scissors

151593190
PN UAS 00048413: RNCC: 3 | RNVC: 2
7360F76039403: RNCC: 5 | RNVC: 9

31 Mar 2004

5110-15-074-6935
Firmer Chisel

150746935
6ART108: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-271-5922
Hand Reamer

142715922
E74111-18-5RS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-33-103-9062
Hand File

331039062
350.053: RNCC: 3 | RNVC: 2

21 Jun 1995

5110-33-153-3609
Hand Hacksaw Frame

331533609
1051.013: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-068-3914
Hand Reamer

150683914
12000-6,5: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-15-074-6383
Hand Reamer

150746383
13UNI525ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-412-3452
Hand Reamer

144123452
E66011-1-5JUIL1976HSS: RNCC: 2 | RNVC: 2
176-01-1-5: RNCC: 3 | RNVC: 2

8 Oct 1986

5110-27-019-5243
Jointer Plane

270195243
07002YT0374: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-33-106-4150
Hand Hacksaw Frame

331064150
23.70: RNCC: 3 | RNVC: 2

19 Dec 1997

5110-15-074-6529
Hand Reamer

150746529
25UNI525TAGLIENTIELICACCSUPERRA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-6295
Hand Reamer

150746295
48UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-197-1690
Nested Saws

151971690
PN UAS 00015199: RNCC: 3 | RNVC: 2
5110F76011371: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-33-103-9089
Hand File

331039089
350.211: RNCC: 3 | RNVC: 2

22 Jun 1995

5110-14-207-7596
Framing Chisel

142077596
NO PRIMARY REF14-207-7596: RNCC: 3 | RNVC: 2
859-12M: RNCC: 5 | RNVC: 2
859-12: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-15-074-5966
Hand File

150745966
41-2D160UNI5669: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-009-8712
Hand Reamer

150098712
570/4: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-33-103-9155
Hand Rasp

331039155
351.272: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-074-6674
Hand Reamer

150746674
17-35UNI535ACCIAI0CARB0NI0SPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-541-3836
Smooth Plane

145413836
62943: RNCC: 3 | RNVC: 2

3 Jun 2004

5110-33-103-9072
Hand File

331039072
350.112: RNCC: 3 | RNVC: 2

21 Jun 1995

5110-33-103-9133
Hand File

331039133
350.663: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-14-371-9161
Hand Reamer

143719161
E66017 CM6 QUEUE CYLINDRIQUE: RNCC: 2 | RNVC: 2
20400-6: RNCC: 3 | RNVC: 2

5 Aug 1981

5110-14-449-0832
Hand File

144490832
502-2-180: RNCC: 3 | RNVC: 2

24 Jul 1991

5110-14-280-9751
Hand Reamer

142809751
E74108D21RS: RNCC: 2 | RNVC: 1

1 Jan 1971

5110-14-202-2879
Gimlet

142022879
1908-3: RNCC: 3 | RNVC: 9
390-3: RNCC: 5 | RNVC: 2
2-3: RNCC: 5 | RNVC: 9
4617-3: RNCC: 5 | RNVC: 9
381-08-3: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-15-107-2963
Hand File

151072963
62321-30/152: RNCC: 3 | RNVC: 2

10 May 1988

5110-33-103-9418
Hand Cable Stripper

331039418
790.140: RNCC: 3 | RNVC: 2

23 Jun 1995

5110-14-270-3943
Hand Reamer

142703943
E66011A6-5RN: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-15-197-1692
Nested Saws

151971692
PN UAS 00022869: RNCC: 3 | RNVC: 2
5110F76009011: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-074-6320
Hand Reamer

150746320
26UNI525ACCLEGUT: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-175-1311
Paper Cutter

151751311
FA 137 PMC GRAFICO: RNCC: 3 | RNVC: 2

21 Jan 2004

5110-14-376-3564
Riffler

143763564
NO PRIMARY REF14-376-3564: RNCC: 3 | RNVC: 2
12981-0: RNCC: 5 | RNVC: 9

30 Mar 1982

5110-14-422-6560
Hand Saw Set

144226560
C011-139REP08: RNCC: 3 | RNVC: 2

10 Mar 1988

5110-33-106-1499
Hand Reamer

331061499
4.901.056.0 - MEISA: RNCC: 3 | RNVC: 2

14 May 1997

5110-15-074-6127
Hand File

150746127
16-104BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-5962
Hand File

150745962
81-2D160UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-196-8794
Ratchet Drill

151968794
PN UAS 00025806: RNCC: 3 | RNVC: 2
5110F76017951: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-274-7978
Firmer Chisel

142747978
E73-201CISEAUDEMENUISIER40: RNCC: 2 | RNVC: 2
7011400201: RNCC: 3 | RNVC: 2
628-2LI0NS40: RNCC: 5 | RNVC: 2
SYQ0708: RNCC: 5 | RNVC: 2
628-40: RNCC: 5 | RNVC: 9
C111E40: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-417-3052
Rip Hand Saw

144173052
NO PRIMARY REF14-417-3052: RNCC: 3 | RNVC: 2
152: RNCC: 5 | RNVC: 9

1 Jul 1987

5110-15-055-3591
Hand Cold Chisel

150553591
50-7-005-30: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-507-9121
Crosscut Hand Saw

145079121
1-15-675: RNCC: 3 | RNVC: 2
1.15-675: RNCC: 5 | RNVC: 2

26 Aug 1998

5110-33-200-1691
Scraping Knife

332001691
28130203: RNCC: 3 | RNVC: 2

26 Oct 2001

5110-14-244-0816
Hand Reamer

142440816
E74111-25FS: RNCC: 2 | RNVC: 2
20020-25: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-33-103-9416
Hand Cable Stripper

331039416
790.120: RNCC: 3 | RNVC: 2

21 Jun 1995

5110-33-103-9202
Hand File

331039202
0911.00823: RNCC: 3 | RNVC: 2
534.261: RNCC: 3 | RNVC: 2
360.052: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-481-4988
Pocket Knife

144814988
6643: RNCC: 3 | RNVC: 9
FI N100 STCM: RNCC: 4 | RNVC: 1

11 May 1996

5110-33-103-9097
Hand File

331039097
350.253: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-15-113-3554
Scraper Blade

151133554
8294273: RNCC: 3 | RNVC: 2

30 May 1989

5110-14-274-8381
Hand File

142748381
938-300BATARDE: RNCC: 3 | RNVC: 2
0932300404: RNCC: 3 | RNVC: 2
3151-BAT-300: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-14-271-6048
Hand File

142716048
E75001LE350C: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-055-3611
Hand File

150553611
B175UNI5487B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-271-5895
Hand Reamer

142715895
E74111-20RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-189-0144
Bolt Cutter

151890144
2222577: RNCC: 3 | RNVC: 2
(241)AA1362222577: RNCC: 5 | RNVC: 2

15 Jan 2010

5110-15-199-0985
Firmer Chisel

151990985
6055/1-30: RNCC: 3 | RNVC: 2
B6055/1-30: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-274-8300
Hand File

142748300
2401-180-4: RNCC: 3 | RNVC: 2
4473-180-4: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-14-273-7572
Hand Reamer

142737572
E74108-17RS: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-15-210-4785
Circle Cutter

152104785
EX5110RN0402066: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-074-7009
Turning Chisel

150747009
6ART102: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-106-1217
Hand File

331061217
409505: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-33-005-4325
Hand File

330054325
4075 16CM. BASTA: RNCC: 3 | RNVC: 2
447903: RNCC: 5 | RNVC: 2

25 Jul 2001

5110-27-024-2093
Claw Hatchet

270242093
05001FB0094: RNCC: 2 | RNVC: 1

30 Sep 2004

5110-15-199-0860
Hand Cold Chisel

151990860
3602/2-4: RNCC: 3 | RNVC: 2
C3602/2-4: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-074-5984
Hand File

150745984
1-200UNI5511: RNCC: 2 | RNVC: 2
1200UNI5511: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6659
Hand Reamer

150746659
2-5UNI532ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-530-2005
Hand File

145302005
PAM.D100: RNCC: 3 | RNVC: 2
3148516006301: RNCC: 5 | RNVC: 2

22 May 2002

5110-33-103-9113
Hand File

331039113
350.451: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-33-103-9129
Hand File

331039129
350.652: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-14-501-7802
Ratchet Bit Brace

145017802
NO PRIMARY REF14-501-7802: RNCC: 3 | RNVC: 2
1J 002 01 01640: RNCC: 5 | RNVC: 9
241 B 01894 000: RNCC: 5 | RNVC: 9
F300 0T 000 1033: RNCC: 6 | RNVC: 9

10 Nov 1997

5110-15-197-1701
Poising Saw

151971701
PN UAS 00047475: RNCC: 3 | RNVC: 2
5120F76039013: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-197-1689
Nested Saws

151971689
PN UAS 00005573: RNCC: 3 | RNVC: 2
5110F76008488: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-050-7715
Hand Rasp

150507715
1-2D250UNI5525-64: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-074-6163
Hand File

150746163
8-106D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-280-8760
Hand Hacksaw Frame

142808760
605.B: RNCC: 3 | RNVC: 2
3148511884003: RNCC: 5 | RNVC: 2
605B: RNCC: 5 | RNVC: 2
0188400: RNCC: 5 | RNVC: 9
605: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-216-6647
Hand Drill

152166647
4922-0-8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-105-5030
Hand Cold Chisel

151055030
60110513: RNCC: 3 | RNVC: 2

30 May 1989

5110-15-074-6061
Hand File

150746061
300UNI5506: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-371-9158
Hand Reamer

143719158
E66017 CM3 QUEUE CYLINDRIQUE: RNCC: 2 | RNVC: 2
20400-3: RNCC: 3 | RNVC: 2

5 Aug 1981

5110-15-074-5895
Hand File

150745895
1-2D350UNI5492: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6083
Hand File

150746083
8INART102MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-5896
Hand File

150745896
1-2D400UNI5492: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-040-7345
Hand Reamer Set

140407345
000131003S: RNCC: 3 | RNVC: 2

1 Jan 1972

5110-14-235-4113
Hand Reamer

142354113
E66012A2RS: RNCC: 2 | RNVC: 2

1 Jan 1967

5110-14-551-1736
Tailor's Shears

145511736
295: RNCC: 3 | RNVC: 2

31 Aug 2006

5110-15-074-6940
Firmer Chisel

150746940
15ART108: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-057-5472
Craftsman's Knife

150575472
301: RNCC: 3 | RNVC: 2
1376-97-142: RNCC: 5 | RNVC: 2
137697142: RNCC: 5 | RNVC: 2

31 Dec 1975

5110-15-074-7436
Hand Hacksaw Blade

150747436
16-18UNI4000ACCIAI0RAPID0SUPER: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-199-0936
Hand Reamer

151990936
7731-24: RNCC: 3 | RNVC: 2
F7730-24: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-074-7052
Firmer Gouge

150747052
8ART113: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-340-2604
Paper Cutter

143402604
3770: RNCC: 3 | RNVC: 2

14 Feb 1977

5110-15-154-6179
Craftsman's Knife

151546179
P400106: RNCC: 3 | RNVC: 2

27 Jul 2001

5110-14-273-7474
Hand Reamer

142737474
E74103-16RS: RNCC: 2 | RNVC: 2
8040021-16: RNCC: 3 | RNVC: 2
703CY16: RNCC: 3 | RNVC: 2
R603-16: RNCC: 3 | RNVC: 2
D6600.160: RNCC: 3 | RNVC: 2
F1111-16: RNCC: 5 | RNVC: 2
SYQ1799: RNCC: 5 | RNVC: 2
166-16: RNCC: 5 | RNVC: 2
1080-16: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-33-155-1111
Hand File

331551111
LIMA MEDIA CANA FINA 4": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-33-103-9148
Hand Rasp

331039148
351.251: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-275-8942
Channel Chisel

142758942
257: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-15-074-3266
Hand File

150743266
1-2D300UNI5487: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-270-3978
Hand Reamer

142703978
E66003-12RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-074-6597
Hand Reamer

150746597
3UNI531ACCIAI0CARB0NI0SPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-192-5297
Back Saw

331925297
8831.016: RNCC: 3 | RNVC: 2
1072.00140: RNCC: 5 | RNVC: 2

15 Feb 1994

5110-33-156-6027
Hand Cable Stripper

331566027
790.102: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-33-103-9201
Hand File

331039201
0911.00813: RNCC: 3 | RNVC: 2
360.051: RNCC: 3 | RNVC: 2
534.531: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-074-6735
Hand Reamer

150746735
23UNI538ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-188-9750
Chisel Bar

151889750
2000072583: RNCC: 3 | RNVC: 2
(241)AA1362000072583: RNCC: 5 | RNVC: 2

11 Jan 2010

5110-15-074-6310
Hand Reamer

150746310
16UNI525ACCLEGUTENS: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-155-1288
Hand File

331551288
LIMA REDONDA BASTA 8IN: RNCC: 3 | RNVC: 2

13 Jun 1990

5110-27-052-0361
Hand Drill

270520361
GBH2-20D: RNCC: 3 | RNVC: 2

15 Dec 2010

5110-14-202-0363
Hand Drill

142020363
NO PRIMARY REF14-202-0363: RNCC: 3 | RNVC: 2
CH18-5: RNCC: 5 | RNVC: 2
1644A: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-14-271-5914
Hand Reamer

142715914
E74111-13RS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-15-055-3627
Hand File

150553627
B175UNI5492B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-33-103-9161
Hand Rasp

331039161
351.362: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-33-103-9210
Hand File

331039210
360.152: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-074-6262
Hand Reamer

150746262
6UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-274-8072
Hand File

142748072
2407-140-2: RNCC: 3 | RNVC: 2
507-0-140: RNCC: 3 | RNVC: 2
TM140: RNCC: 5 | RNVC: 2
SYQ0917: RNCC: 5 | RNVC: 2
685-140-2: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-14-274-8062
Hand File

142748062
507-00-140: RNCC: 3 | RNVC: 2
2407-140-0: RNCC: 3 | RNVC: 2
685-140-0: RNCC: 5 | RNVC: 2
SYB0290: RNCC: 5 | RNVC: 2
TB140: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-14-478-3866
Hand Reamer

144783866
580.1040: RNCC: 3 | RNVC: 2

26 Oct 1995

5110-14-543-3339
Bolt Cutter Jaws

145433339
990.LR0: RNCC: 3 | RNVC: 2
3148512175414: RNCC: 5 | RNVC: 2

20 Oct 2004

5110-15-074-7040
Firmer Gouge

150747040
18ART112: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-050-9083
Hand File

150509083
D200UNI5494B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-271-5964
Hand Reamer

142715964
E74111-19-5FS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-14-506-2470
Hand Cold Chisel

145062470
263.P25: RNCC: 3 | RNVC: 2
3148511616604: RNCC: 5 | RNVC: 2
263-P25: RNCC: 5 | RNVC: 2

15 Apr 1998

5110-14-273-7482
Hand Reamer

142737482
E74103-24RS: RNCC: 2 | RNVC: 2
R603-24: RNCC: 3 | RNVC: 2
8040021-24: RNCC: 3 | RNVC: 2
703CY24: RNCC: 3 | RNVC: 2
D6600.240: RNCC: 3 | RNVC: 2
SYQ1805: RNCC: 5 | RNVC: 2
166-24: RNCC: 5 | RNVC: 2
F1111-24: RNCC: 5 | RNVC: 2
1080-24: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-074-6862
Hand Cape Chisel

150746862
150-6ART3616CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-409-7790
Scraper Blade

144097790
DR55LAME RECHANGE: RNCC: 3 | RNVC: 2

28 May 1986

5110-14-555-9929
Knife Blade

145559929
845.L2: RNCC: 3 | RNVC: 2

18 Jan 2008

5110-15-237-0637
Power Hacksaw Blade

152370637
3802: RNCC: 3 | RNVC: 2

27 Aug 2007

5110-14-296-0195
Wood Scraper

142960195
NO PRIMARY REF14-296-0195: RNCC: 3 | RNVC: 2
15-2459: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-14-295-6802
Hand Reamer

142956802
E74112-6-5RS: RNCC: 2 | RNVC: 2

1 Jan 1973

5110-15-119-3883
Single Bit Ax

151193883
1420-97-339: RNCC: 3 | RNVC: 2
(241)A0199142097339: RNCC: 5 | RNVC: 2
60155427: RNCC: 5 | RNVC: 2

25 Jul 1994

5110-27-000-8012
Hand Cold Chisel

270008012
01080201408: RNCC: 2 | RNVC: 1
250MM: RNCC: 2 | RNVC: 1
5500 40 0250: RNCC: 3 | RNVC: 2
5500 40 0250: RNCC: 5 | RNVC: 9

23 Oct 1990

5110-27-000-8000
Hand Cold Chisel

270008000
5500 20 0100: RNCC: 3 | RNVC: 2

23 Oct 1990

5110-14-512-0550
Hand File

145120550
NO PRIMARY REF14-512-0550: RNCC: 3 | RNVC: 2
RD-200MM: RNCC: 5 | RNVC: 9
RD200MM: RNCC: 5 | RNVC: 9

3 Feb 1999

5110-14-207-5891
Hand Reamer

142075891
NO PRIMARY REF14-207-5891: RNCC: 3 | RNVC: 2
105B: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-15-199-0948
Hand Reamer

151990948
7730-5: RNCC: 3 | RNVC: 2
F7730-5: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-409-7788
Wood Scraper

144097788
DR55: RNCC: 3 | RNVC: 2

28 May 1986

5110-15-074-6290
Hand Reamer

150746290
40UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-068-3924
Hand Reamer

150683924
12000-11,5: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-15-009-8710
Hand Reamer

150098710
570/5: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-15-196-9872
Hand File

151969872
PN UAS 00047462: RNCC: 3 | RNVC: 2
5110F76039047: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-27-000-8005
Hand Cold Chisel

270008005
DUZ KESKI 250MM: RNCC: 2 | RNVC: 1
5500 20 0250: RNCC: 3 | RNVC: 2

23 Oct 1990

5110-15-179-5859
Nested Saws

151795859
15-216: RNCC: 3 | RNVC: 2

11 Apr 2007

5110-15-159-3202
Tailor's Shears

151593202
PN UAS 00016262: RNCC: 3 | RNVC: 2
7520F76023518: RNCC: 5 | RNVC: 9

31 Mar 2004

5110-15-074-6225
Hand Rasp

150746225
B150UNI5524: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-3267
Hand File

150743267
1-2D350UNI5487: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6573
Hand Reamer

150746573
1-5UNI524ACCIAI0LEGAT0DAUTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-201-5395
Hand File

142015395
E75001LA300A: RNCC: 2 | RNVC: 2
0900300101: RNCC: 3 | RNVC: 2
900-300B: RNCC: 3 | RNVC: 2
0900300104: RNCC: 3 | RNVC: 2
101-BA-300: RNCC: 3 | RNVC: 2
101BATARDE300: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-270-3997
Hand Reamer

142703997
E74104-44RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-33-106-1179
Hand File

331061179
BL4006 6B: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-15-074-9038
Hand Reamer

150749038
45UNI525ACCSUPER: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-003-3390
Bolt Cutter

150033390
01960005: RNCC: 3 | RNVC: 2
(241)AG622MR3461196N/900: RNCC: 5 | RNVC: 2
MR3461196N/900: RNCC: 5 | RNVC: 2

4 Nov 2013

5110-14-417-1011
Hand Reamer

144171011
530763: RNCC: 3 | RNVC: 2

1 Jul 1987

5110-15-196-6922
Hand Hacksaw Frame

151966922
PN UAS 00025773: RNCC: 3 | RNVC: 2
5110F76011993: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-068-3934
Hand Reamer

150683934
12000-21: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-33-103-9178
Hand File

331039178
352.712: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-274-8073
Hand File

142748073
2408-140-2: RNCC: 3 | RNVC: 2
686-140-2: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-14-460-7280
Hand Reamer

144607280
E74 112-14-5RS: RNCC: 2 | RNVC: 2
R601-14-5RS: RNCC: 3 | RNVC: 2

8 Feb 1993

5110-15-074-5826
Hand File

150745826
D125UNI5493: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-555-9771
Hand Cold Chisel

145559771
262A.18: RNCC: 3 | RNVC: 2
662354: RNCC: 3 | RNVC: 2
3148516623546: RNCC: 5 | RNVC: 2

17 Jan 2008

5110-15-074-6461
Hand Reamer

150746461
38UNI525TAGLIENTIELICACCLEGUTEN-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-14-338-3806
Adz Handle

143383806
08-1P372REP3: RNCC: 3 | RNVC: 2

6 Nov 1976

5110-15-074-6002
Hand File

150746002
125UNI5516: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5936
Hand File

150745936
11-2D140UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6135
Hand File

150746135
12-104D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-399-8617
Hand Reamer

143998617
E74103-1-5RS: RNCC: 2 | RNVC: 2
R603-1-S: RNCC: 3 | RNVC: 2
1080-1-S: RNCC: 5 | RNVC: 9

9 Apr 1985

5110-14-274-7906
Back Saw

142747906
NO PRIMARY REF14-274-7906: RNCC: 3 | RNVC: 2
269B30: RNCC: 5 | RNVC: 2
C269B30: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-464-4950
Hand Reamer

144644950
854-600-016-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5110-14-393-0326
Hand File

143930326
AIGDRD160T2: RNCC: 3 | RNVC: 2
3148516317506: RNCC: 5 | RNVC: 2

12 Apr 1984

5110-15-054-4812
Hand Masonry Drill

150544812
59-3-700: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-543-3303
File Handle

145433303
MP.2: RNCC: 3 | RNVC: 2
3148510323428: RNCC: 5 | RNVC: 2

20 Oct 2004

5110-33-103-9216
Hand File

331039216
360.232: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-074-6020
Hand File

150746020
100UNI5518: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-196-9886
Hand File

151969886
PN UAS 00025767: RNCC: 3 | RNVC: 2
5110F76011918: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-050-9074
Hand File

150509074
1-2-150UNI549-B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-33-202-1148
Hand File

332021148
51 1300-150: RNCC: 3 | RNVC: 2

16 Jan 2003

5110-14-518-0439
Hand Cold Chisel

145180439
GS88-19X200: RNCC: 3 | RNVC: 2
1.80.0250: RNCC: 5 | RNVC: 2

21 Jan 2000

5110-14-271-5934
Hand Reamer

142715934
E74111-12FS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-074-6132
Hand File

150746132
16-104MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-530-2000
Hand File

145302000
TP.AVR250: RNCC: 3 | RNVC: 2
3148516192707: RNCC: 5 | RNVC: 2

22 May 2002

5110-14-210-5453
Hand File

142105453
E75001LG200B: RNCC: 2 | RNVC: 2
CAR.MD200EM: RNCC: 3 | RNVC: 2
0913200201: RNCC: 3 | RNVC: 2
913-200DD: RNCC: 3 | RNVC: 2
3148516511201: RNCC: 5 | RNVC: 2
CARMD200EM: RNCC: 5 | RNVC: 2
102013: RNCC: 5 | RNVC: 2
0651120: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-33-107-7077
Hand Cold Chisel

331077077
50412: RNCC: 3 | RNVC: 2
DIN 6453/L=300/AC.CR.VA.: RNCC: 4 | RNVC: 1
5110001026: RNCC: 5 | RNVC: 2

17 Apr 2000

5110-33-103-9095
Hand File

331039095
350.251: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-15-074-6330
Hand Reamer

150746330
44UNI525ACCLEGUT: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-050-9071
Hand File

150509071
B250UNI5493B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-27-015-8807
Compass Saw

270158807
99999-NIIN-DA0037584: RNCC: 2 | RNVC: 1

17 Dec 2002

5110-14-201-3069
Smooth Plane

142013069
NO PRIMARY REF14-201-3069: RNCC: 3 | RNVC: 2
ST22AT19-200X44: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-27-045-2357
Hand Rasp

270452357
J67-108H: RNCC: 2 | RNVC: 1

17 Apr 2009

5110-14-264-0743
Hand Cold Chisel

142640743
252.10: RNCC: 3 | RNVC: 2
252-10: RNCC: 5 | RNVC: 2
3148511603208: RNCC: 5 | RNVC: 2
FACOM 252-10: RNCC: 5 | RNVC: 2
0160320: RNCC: 5 | RNVC: 9
958 273 000 001: RNCC: 6 | RNVC: 9

1 Jan 1970

5110-15-074-6625
Hand Reamer

150746625
8UNI532ACCIAI0CARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

1 May 1981

5110-15-074-5964
Hand File

150745964
41-2D140UNI5669: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-287-0225
Firmer Chisel

142870225
131-15: RNCC: 3 | RNVC: 2
862-2-15: RNCC: 5 | RNVC: 2
381-19-15: RNCC: 5 | RNVC: 9
862-15: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-27-018-6012
Hand Cold Chisel

270186012
5110-15881-00002: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-063-9408
Hand File

150639408
62321-35/171: RNCC: 3 | RNVC: 2

25 May 1983

5110-14-421-5124
Bolt Cutter

144215124
180N-1: RNCC: 3 | RNVC: 2
180N1: RNCC: 3 | RNVC: 2
3272670224131: RNCC: 5 | RNVC: 2

14 Jan 1988

5110-14-274-7980
Firmer Chisel

142747980
E73-201-50EMMANCHE: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-33-155-1105
Hand File

331551105
LIMA CUADRADA S/FINA 10": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-14-271-5896
Hand Reamer

142715896
E74111-22RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-454-8795
Hand File

144548795
AIG.CAR140T2: RNCC: 3 | RNVC: 2
3148516315106: RNCC: 5 | RNVC: 2
AIGCAR140T2: RNCC: 5 | RNVC: 2
0631510: RNCC: 5 | RNVC: 9

24 Apr 1992

5110-14-394-4100
Hand File

143944100
E75001LL200B: RNCC: 2 | RNVC: 2
PILMD200: RNCC: 3 | RNVC: 2
3148516053206: RNCC: 5 | RNVC: 2

28 Aug 1984

5110-15-074-6028
Hand File

150746028
2D200UNI5500: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-532-1727
Pocket Knife

145321727
P3014001100: RNCC: 3 | RNVC: 2

16 Oct 2002

5110-33-155-9493
Hand Graver

331559493
503.101: RNCC: 3 | RNVC: 2
313.250: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-15-075-0826
Hand File

150750826
2D180VNI5670A: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-437-5760
Hand File

144375760
NO PRIMARY REF14-437-5760: RNCC: 3 | RNVC: 2
AIGFS180T0: RNCC: 5 | RNVC: 2
91592358: RNCC: 5 | RNVC: 2

7 Feb 1990

5110-33-106-4504
Firmer Chisel

331064504
424-40: RNCC: 3 | RNVC: 2

9 Feb 1998

5110-14-512-0548
Hand File

145120548
NO PRIMARY REF14-512-0548: RNCC: 3 | RNVC: 2
TRI-200: RNCC: 5 | RNVC: 9
TRI200: RNCC: 5 | RNVC: 9

3 Feb 1999

5110-15-068-3821
End Cutting Nippers

150683821
194003: RNCC: 3 | RNVC: 2
194/180: RNCC: 5 | RNVC: 2

23 Sep 1983

5110-14-274-8051
Auger Handle

142748051
B54515-38A: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-14-546-7461
Paper Cutter

145467461
997 048 100 00: RNCC: 3 | RNVC: 2

11 Aug 2005

5110-15-074-5935
Hand File

150745935
1D160UNI5669: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-274-8085
Hand File

142748085
2411-180-0: RNCC: 3 | RNVC: 2
511-00-140: RNCC: 3 | RNVC: 2
689-180-0: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-15-179-7466
Pocket Knife

151797466
3253560108045: RNCC: 3 | RNVC: 2
0-10-804: RNCC: 3 | RNVC: 2

7 Jun 2007

5110-14-511-5465
Hand File Set

145115465
AS.12LBP160T0: RNCC: 3 | RNVC: 2
629710: RNCC: 5 | RNVC: 2
3148516297105: RNCC: 5 | RNVC: 2

24 Dec 1998

5110-15-074-6169
Hand File

150746169
10-107BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-327-1416
Hand Reamer

143271416
170: RNCC: 3 | RNVC: 2

2 Jul 1975

5110-14-490-2304
Paper Cutter

144902304
NO PRIMARY REF14-490-2304: RNCC: 3 | RNVC: 2
V9506: RNCC: 5 | RNVC: 2
009323001R: RNCC: 5 | RNVC: 2

23 Sep 1997

5110-14-522-1527
Hand Reamer

145221527
33503310: RNCC: 3 | RNVC: 2

4 Oct 2000

5110-15-074-6238
Hand Rasp

150746238
B300UNI5525: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-359-0279
Hand Wire Stripper

143590279
45-171: RNCC: 3 | RNVC: 2
H35-8: RNCC: 5 | RNVC: 2

7 Sep 1979

5110-14-210-7113
Crosscut Hand Saw

142107113
FD4332: RNCC: 3 | RNVC: 2
B0I2-341: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-15-124-9672
Hand Graver

151249672
534-150: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-401-7502
File Handle

144017502
316-14: RNCC: 3 | RNVC: 2

13 Jun 1985

5110-14-456-0091
Hand Wire Stripper

144560091
04140104000: RNCC: 3 | RNVC: 2
5011DK14: RNCC: 3 | RNVC: 2
3597470079904: RNCC: 5 | RNVC: 2
0558 11: RNCC: 5 | RNVC: 2
414104: RNCC: 5 | RNVC: 2
85-694-5817: RNCC: 6 | RNVC: 9

11 Jun 1992

5110-15-074-6227
Hand Rasp

150746227
B250UNI5524: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-430-1027
Bolt Cutter

144301027
NO PRIMARY REF14-430-1027: RNCC: 3 | RNVC: 2
0219602: RNCC: 5 | RNVC: 2
998.A0: RNCC: 5 | RNVC: 2
998A0: RNCC: 5 | RNVC: 2
999R0: RNCC: 5 | RNVC: 2

1 Mar 1989

5110-14-270-3977
Hand Reamer

142703977
E66003-11RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-385-8656
Circle Cutter

143858656
86-00-01: RNCC: 3 | RNVC: 9

24 Aug 1983

5110-15-193-5668
Bolt Cutter

151935668
610963: RNCC: 3 | RNVC: 2
610963.0: RNCC: 5 | RNVC: 2

11 Jun 2010

5110-14-201-6802
Pocket Knife

142016802
NO PRIMARY REF14-201-6802: RNCC: 3 | RNVC: 2
DES1-203A: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-271-5955
Hand Reamer

142715955
E74111-13-5FS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-27-015-8800
Smooth Plane

270158800
99999-NIIN-DA0037564: RNCC: 2 | RNVC: 1

17 Dec 2002

5110-15-199-0873
Broad Hatchet

151990873
3580-600: RNCC: 3 | RNVC: 2

12 Jan 2005

5110-27-018-5785
Bolt Cutter

270185785
5110-AM387-00003: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-33-203-4865
Ship Scraper

332034865
841001: RNCC: 3 | RNVC: 2

29 Apr 2004

5110-33-203-1047
Hand Reamer

332031047
5110-900001: RNCC: 3 | RNVC: 2

29 Jan 2004

5110-15-105-5028
Broad Hatchet

151055028
1500/IC/III-08.09.58-53-US: RNCC: 3 | RNVC: 2

30 May 1989

5110-27-013-7741
Adz Handle

270137741
AYD-02-KS 01: RNCC: 2 | RNVC: 1

23 Jul 2002

5110-14-467-5546
Hand Reamer

144675546
E66003A36RN: RNCC: 2 | RNVC: 2
EXP-QC-TD-36: RNCC: 3 | RNVC: 2

19 Jan 1994

5110-14-213-5600
Hand File

142135600
E75001LF150A: RNCC: 2 | RNVC: 2
0914150101: RNCC: 3 | RNVC: 2
914-150B: RNCC: 3 | RNVC: 2
0914150104: RNCC: 3 | RNVC: 2
110-BA-150: RNCC: 3 | RNVC: 2

1 Jan 1964

5110-33-005-4252
Hand Bench Shears

330054252
8729.025: RNCC: 3 | RNVC: 2

23 Jul 2001

5110-15-197-0498
Hand Wire Stripper

151970498
PN UAS 00025876: RNCC: 3 | RNVC: 2
5120F76012009: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-074-7152
Blacksmith's Chisel

150747152
2UNI4133U52WC20-2955: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-488-5322
Hand Reamer

144885322
F-P-5,4U6: RNCC: 3 | RNVC: 2
FP5-4U6: RNCC: 5 | RNVC: 2

15 May 1997

5110-15-074-6379
Hand Reamer

150746379
9UNI525ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-019-5145
Hand Drill

270195145
07002YU0014: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-33-005-4320
Hand File

330054320
4072 16CM. FINA: RNCC: 3 | RNVC: 2
445909: RNCC: 5 | RNVC: 2

25 Jul 2001

5110-14-270-3975
Hand Reamer

142703975
E66003-9RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-271-5903
Hand Reamer

142715903
E74111-42RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-214-6037
Bolt Cutter

152146037
450: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-074-5871
Hand File

150745871
1-2D400UNI5489: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-488-5364
Hand Rasp

144885364
LFC-35-H: RNCC: 3 | RNVC: 2
LFC35H: RNCC: 5 | RNVC: 2
3272670260702: RNCC: 5 | RNVC: 2

16 May 1997

5110-15-120-9073
Hand File

151209073
STD/04.044: RNCC: 3 | RNVC: 2

4 Sep 1995

5110-14-285-4780
Hand File

142854780
NO PRIMARY REF14-285-4780: RNCC: 3 | RNVC: 2
2318: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-33-202-1149
Hand File

332021149
51 4300-150: RNCC: 3 | RNVC: 2

16 Jan 2003

5110-15-074-6148
Hand File

150746148
8-105D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-207-7553
Single Bit Ax

142077553
NOREF142077553: RNCC: 3 | RNVC: 2
445-105MM: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-15-074-6709
Hand Reamer

150746709
26UNI538ACCIAI0CARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6687
Hand Reamer

150746687
4-10UNI535ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-055-9901
Hand Cold Chisel

270559901
L27-150: RNCC: 2 | RNVC: 1

20 Jan 2012

5110-14-249-9384
Hand Reamer

142499384
E66003A7-5HS: RNCC: 2 | RNVC: 2
3088-7-5: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-15-050-9106
Hand File

150509106
1-2D200UNI5489A: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-27-021-1141
Hand Cable Stripper

270211141
07002YF0009: RNCC: 2 | RNVC: 1

15 Dec 2003

5110-33-156-5758
Scraper Blade

331565758
790.206: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-33-108-3583
Hand Hacksaw Frame

331083583
59010-125: RNCC: 3 | RNVC: 2

28 Feb 2001

5110-27-057-2144
Hand Wire Stripper

270572144
8PK-313B: RNCC: 5 | RNVC: 9

4 Jul 2012

5110-15-050-6036
Hand File

150506036
B150UNI5487B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-199-0944
Hand Reamer

151990944
7730-16: RNCC: 3 | RNVC: 2
F7730-16: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-201-7253
Hand Reamer

142017253
E74104-300RN: RNCC: 2 | RNVC: 2

1 Jan 1962

5110-15-074-5924
Hand File

150745924
1-2D100UNI5498: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5881
Hand File

150745881
B100UNI5492B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-271-6020
Hand File

142716020
E75001LB200C: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-199-0989
Firmer Chisel

151990989
6055/1-4: RNCC: 3 | RNVC: 2
B6055/1-4: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-074-5809
Hand File

150745809
B100UNI5493B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-369-7126
Hand Reamer

143697126
E74112-38RS: RNCC: 2 | RNVC: 2
F-P-38: RNCC: 3 | RNVC: 2
164-38: RNCC: 3 | RNVC: 2

17 Apr 1981

5110-14-337-4004
Hand Reamer

143374004
613-34A39: RNCC: 3 | RNVC: 9
85-688-4644: RNCC: 6 | RNVC: 9

7 Oct 1976

5110-14-460-1644
Hand Reamer

144601644
E66003A43-5HS: RNCC: 2 | RNVC: 2

13 Jan 1993

5110-27-014-9663
Broad Hatchet

270149663
5120-18348-00001: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-15-180-2696
Hand File

151802696
(241)A08731718A8/Q: RNCC: 3 | RNVC: 2
1718A8/Q: RNCC: 3 | RNVC: 2

7 Apr 2008

5110-15-200-7913
Hand Post Drill

152007913
TCS 40 TC-CI-DA: RNCC: 3 | RNVC: 2
(241)AA821TCS40TC-CI-DA: RNCC: 5 | RNVC: 2

28 Feb 2006

5110-33-155-1104
Hand File

331551104
LIMA CUADRADA FINA 14": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-33-155-1291
Hand File

331551291
LIMA REDONDA FINA 8": RNCC: 3 | RNVC: 2
414707: RNCC: 5 | RNVC: 2

13 Jun 1990

5110-15-074-6236
Hand Rasp

150746236
B200UNI5525: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-203-1400
Hand Rasp

332031400
41028PG FINA: RNCC: 3 | RNVC: 2

4 Feb 2004

5110-15-187-2843
Chisel Bar

151872843
2000057811: RNCC: 3 | RNVC: 2
(241)AA1362000057811: RNCC: 5 | RNVC: 2

10 Mar 2009

5110-15-074-6248
Hand Rasp

150746248
B350UNI5522: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-439-6565
Paper Cutter

144396565
844.S9: RNCC: 3 | RNVC: 2
230/521/4: RNCC: 5 | RNVC: 2
3148512070955: RNCC: 5 | RNVC: 2
844S9: RNCC: 5 | RNVC: 2
2715 66 06: RNCC: 5 | RNVC: 2
0207095: RNCC: 5 | RNVC: 9

16 May 1990

5110-15-188-9744
Framing Chisel

151889744
2000072578: RNCC: 3 | RNVC: 2
(241)AA1362000072578: RNCC: 5 | RNVC: 2

11 Jan 2010

5110-15-074-6272
Hand Reamer

150746272
16UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-155-7068
Hand Graver

151557068
D637.76.779: RNCC: 3 | RNVC: 2
D63776779: RNCC: 3 | RNVC: 2

22 May 2002

5110-33-103-9139
Hand Rasp

331039139
351.151: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-14-338-3095
Firmer Chisel

143383095
E73-201CISEAUDESCULPTEUR20: RNCC: 2 | RNVC: 2
131-20: RNCC: 3 | RNVC: 2
4597-20: RNCC: 3 | RNVC: 9
862-2-20: RNCC: 5 | RNVC: 2
3521-20: RNCC: 5 | RNVC: 9
381-19-20: RNCC: 5 | RNVC: 9
862-20: RNCC: 5 | RNVC: 9
C001E20: RNCC: 5 | RNVC: 9
C011E20: RNCC: 5 | RNVC: 9

6 Nov 1976

5110-14-274-8534
Single Bit Ax

142748534
0500000101: RNCC: 3 | RNVC: 2
500SANSMANCHE: RNCC: 3 | RNVC: 2
SYQ0712: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-27-032-5242
Hand File Set

270325242
13042001: RNCC: 2 | RNVC: 1

27 Jul 2006

5110-14-280-9749
Hand Reamer

142809749
E74108D19RS: RNCC: 2 | RNVC: 1

1 Jan 1971

5110-14-200-8707
Adz

142008707
NO PRIMARY REF14-200-8707: RNCC: 3 | RNVC: 2
CHA2-332-80: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-379-1240
Hand Reamer

143791240
14231-42780: RNCC: 3 | RNVC: 2

6 Sep 1982

5110-15-074-5822
Hand File

150745822
1-2D300UNI5493: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-274-7982
Turning Chisel

142747982
101-10EMMANCHE: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-15-000-1827
Hand Wire Stripper

150001827
SPC: RNCC: 3 | RNVC: 2

7 Feb 2013

5110-14-530-3011
Brick Chisel

145303011
1265.40P: RNCC: 3 | RNVC: 2
3148512260059: RNCC: 5 | RNVC: 2

29 May 2002

5110-15-199-0995
Hand Rasp

151990995
2658/1-10": RNCC: 3 | RNVC: 2
D2658/1-10": RNCC: 5 | RNVC: 2

12 Jan 2005

5110-27-059-7447
Docking Hand Saw

270597447
BLITZ3: RNCC: 2 | RNVC: 1

22 Oct 2013

5110-27-046-4980
Hand Hacksaw Frame

270464980
410 MM: RNCC: 2 | RNVC: 1

24 Aug 2009

5110-15-179-5866
Broad Hatchet

151795866
59-085: RNCC: 3 | RNVC: 2

11 Apr 2007

5110-15-197-0397
Fore Plane

151970397
PN UAS 00025782: RNCC: 3 | RNVC: 2
5110F76012998: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-074-5909
Hand File

150745909
B300UNI5495B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-274-7781
Smooth Plane

142747781
110: RNCC: 3 | RNVC: 9

1 Jan 1971

5110-33-155-1305
Hand File

331551305
LIMA TRIANGULAR S/FINA 10IN: RNCC: 3 | RNVC: 2

13 Jun 1990

5110-14-264-3243
Gimlet

142643243
390-5: RNCC: 3 | RNVC: 2
4617-5: RNCC: 3 | RNVC: 9
381-08-5: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-15-054-1376
Rip Hand Saw

150541376
5445-500: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-33-004-9421
Hand File

330049421
51420-200: RNCC: 3 | RNVC: 2
4001-8-200: RNCC: 3 | RNVC: 2

14 Mar 2000

5110-14-244-0844
Hand Reamer

142440844
E74111-28FS: RNCC: 2 | RNVC: 2

1 Jan 1968

5110-14-330-7585
Firmer Gouge

143307585
E73-201G0UGE12: RNCC: 2 | RNVC: 2
38120-12: RNCC: 5 | RNVC: 9

2 Jul 1975

5110-14-488-5320
Hand Reamer

144885320
F-P-4U6: RNCC: 3 | RNVC: 2
FP4U6: RNCC: 5 | RNVC: 2

15 May 1997

5110-15-074-6152
Hand File

150746152
16-105D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-447-7815
Hand Drill

144477815
851-915-006-0: RNCC: 3 | RNVC: 2

6 Jun 1991

5110-14-273-7470
Hand Reamer

142737470
E74103-12RS: RNCC: 2 | RNVC: 2
R603-12: RNCC: 3 | RNVC: 2
D6600.120: RNCC: 3 | RNVC: 2
8040021-12: RNCC: 3 | RNVC: 2
703CY12: RNCC: 3 | RNVC: 2
SYQ1795: RNCC: 5 | RNVC: 2
166-12: RNCC: 5 | RNVC: 2
F1111-12: RNCC: 5 | RNVC: 2
1080-12: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-27-000-8004
Hand Cold Chisel

270008004
5500 20 0200: RNCC: 3 | RNVC: 2

23 Oct 1990

5110-15-074-6075
Hand File

150746075
12INART101D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-197-0933
Hand Rasp

151970933
PN UAS 00048252: RNCC: 3 | RNVC: 2
5110F76039291: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-27-034-4033
Pipe Cutter

270344033
3-30: RNCC: 2 | RNVC: 1

28 Dec 2006

5110-14-540-8537
Firmer Chisel

145408537
7011300201: RNCC: 3 | RNVC: 2
3303807011253: RNCC: 5 | RNVC: 2

23 Apr 2004

5110-14-490-8696
Firmer Chisel

144908696
2-16-545: RNCC: 3 | RNVC: 2
4061 421 111 018: RNCC: 5 | RNVC: 9
628.18: RNCC: 5 | RNVC: 9
F300 0T 000 4935: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-15-074-6079
Hand File

150746079
10INART102BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-200-2375
Tube Cutter

332002375
510122: RNCC: 3 | RNVC: 2
MOD. FA-206: RNCC: 5 | RNVC: 2

16 Nov 2001

5110-33-204-0238
Doweling Jig

332040238
U4-AYC1138-1001: RNCC: 3 | RNVC: 2

3 Feb 2005

5110-15-074-6149
Hand File

150746149
10-105D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-372-1654
Hand File

143721654
0608260: RNCC: 3 | RNVC: 2
3148516082602: RNCC: 5 | RNVC: 2
ALP.300: RNCC: 5 | RNVC: 2
ALP300: RNCC: 5 | RNVC: 2

1 Sep 1981

5110-14-271-5916
Hand Reamer

142715916
E74111-14-5RS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-14-270-3929
Hand Reamer

142703929
E66011A5RN: RNCC: 2 | RNVC: 2
1AH16012: RNCC: 3 | RNVC: 2
D7601.050: RNCC: 3 | RNVC: 2
8040061-5: RNCC: 3 | RNVC: 2
703CO5: RNCC: 3 | RNVC: 2
SYQ1954: RNCC: 5 | RNVC: 2
30-05-5: RNCC: 5 | RNVC: 9
1140-5: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-15-054-1363
Crosscut Hand Saw

150541363
56-5-294-450: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-272-3614
Hand Cape Chisel

142723614
7211220001: RNCC: 3 | RNVC: 2
3443305: RNCC: 3 | RNVC: 2
265.22: RNCC: 3 | RNVC: 2
265-22: RNCC: 5 | RNVC: 2
3148511618400: RNCC: 5 | RNVC: 2
SYQ0711: RNCC: 5 | RNVC: 2
0714 63 10: RNCC: 5 | RNVC: 2
0161840: RNCC: 5 | RNVC: 9
255-22: RNCC: 5 | RNVC: 9
30-220: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-540-8513
Brick Chisel

145408513
7245150001: RNCC: 3 | RNVC: 2
3303807245030: RNCC: 5 | RNVC: 2

23 Apr 2004

5110-15-074-6633
Hand Reamer

150746633
2-5UNI532ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-159-3192
Ladies' Scissors

151593192
PN UAS 00036520: RNCC: 3 | RNVC: 2
5110F76030689: RNCC: 5 | RNVC: 9

31 Mar 2004

5110-15-179-5857
Wood Scraper

151795857
12-080: RNCC: 3 | RNVC: 2

11 Apr 2007

5110-14-437-5763
Hand File

144375763
NO PRIMARY REF14-437-5763: RNCC: 3 | RNVC: 2
AIGTRI180T0: RNCC: 5 | RNVC: 2
91592363: RNCC: 5 | RNVC: 2

7 Feb 1990

5110-15-050-6069
Hand File

150506069
1-2D225UNI5487A: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-054-1404
Hand Hacksaw Frame

150541404
51-5-786: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-050-6093
Hand File

150506093
B200UNI5494B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-418-1689
Hand File

144181689
AIG.FS100T2: RNCC: 3 | RNVC: 2
AIG.FS 100 T2: RNCC: 5 | RNVC: 2
3148516311009: RNCC: 5 | RNVC: 2
AIGFS100T2: RNCC: 5 | RNVC: 2
0631100: RNCC: 5 | RNVC: 9

6 Aug 1987

5110-15-009-8688
Blacksmith's Chisel

150098688
3603/2/5: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-14-228-7742
Hand File

142287742
E75001LA250B: RNCC: 2 | RNVC: 2
0900250201: RNCC: 3 | RNVC: 2
900-250DD: RNCC: 3 | RNVC: 2
101DEMID0UCE250: RNCC: 5 | RNVC: 9

1 Jan 1966

5110-15-074-5942
Hand File

150745942
21-2D160UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-39-000-0144
Bow Saw Blade

390000144
NOMIM 3990962111: RNCC: 2 | RNVC: 2
JOAGAR: RNCC: 5 | RNVC: 2

22 Jan 2002

5110-14-202-2328
Hardy

142022328
0021070601: RNCC: 3 | RNVC: 2
M0B21-50: RNCC: 3 | RNVC: 2
620: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-15-196-9859
Hand File

151969859
PN UAS 00038494: RNCC: 3 | RNVC: 2
5110F76032640: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-418-1691
Hand File

144181691
AIGPDE100T2: RNCC: 3 | RNVC: 2
3148516310705: RNCC: 5 | RNVC: 2

6 Aug 1987

5110-15-074-6297
Hand Reamer

150746297
3UNI525ACCLEGUTENS: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-196-9877
Hand File

151969877
PN UAS 00016730: RNCC: 3 | RNVC: 2
5110F76025100: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-055-3579
Firmer Chisel

150553579
56-4-253: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-074-7013
Turning Chisel

150747013
14ART102: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6640
Hand Reamer

150746640
13UNI532ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-018-5782
Bolt Cutter

270185782
5110-03072-00006: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-383-8657
Hand Reamer

143838657
E74112-26-5RS: RNCC: 2 | RNVC: 2
F-P-26-5: RNCC: 3 | RNVC: 2
164-26-5: RNCC: 3 | RNVC: 2

11 Apr 1983

5110-14-449-0825
Hand File

144490825
2115-BA-300-5D: RNCC: 3 | RNVC: 2
0927300904: RNCC: 3 | RNVC: 2

24 Jul 1991

5110-14-473-7368
Hand Wire Stripper

144737368
162: RNCC: 3 | RNVC: 2
3148511391907: RNCC: 5 | RNVC: 2
SYQ1790: RNCC: 5 | RNVC: 2
307-2064: RNCC: 5 | RNVC: 2
307-2064: RNCC: 5 | RNVC: 2
0139190: RNCC: 5 | RNVC: 9
FACOM162: RNCC: 5 | RNVC: 9

11 Jan 1995

5110-14-438-9583
Hand Reamer

144389583
330A97-2102-27: RNCC: 3 | RNVC: 2

11 Apr 1990

5110-15-074-7053
Firmer Gouge

150747053
10ART113: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-27-000-8018
Hand Cold Chisel

270008018
5520440125: RNCC: 2 | RNVC: 1
5520 44 0125: RNCC: 2 | RNVC: 1
353-5": RNCC: 2 | RNVC: 1
5520 44 0125: RNCC: 3 | RNVC: 2

23 Oct 1990

5110-14-487-6273
Bolt Cutter

144876273
990.A1: RNCC: 3 | RNVC: 2
3148512174103: RNCC: 5 | RNVC: 2
0714 06 81: RNCC: 5 | RNVC: 2
2714 010 600: RNCC: 5 | RNVC: 2
2714 020 600: RNCC: 5 | RNVC: 2
0217410: RNCC: 5 | RNVC: 9

15 Apr 1997

5110-15-074-6181
Hand File

150746181
14-107D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-161-6796
Turning Gouge

331616796
95127: RNCC: 3 | RNVC: 2

24 Oct 1996

5110-14-427-3468
Hand Hacksaw Blade

144273468
660.10: RNCC: 3 | RNVC: 2
235-4488: RNCC: 5 | RNVC: 2
0191910: RNCC: 5 | RNVC: 2
660-10: RNCC: 5 | RNVC: 2
91626664: RNCC: 5 | RNVC: 2
2695 025 222: RNCC: 5 | RNVC: 2
FACOM660.10: RNCC: 5 | RNVC: 9

13 Oct 1988

5110-33-155-1100
Hand File

331551100
LIMA CUADRADA BASTA 14": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-14-218-4250
Hand File

142184250
E75001LA100A: RNCC: 2 | RNVC: 2
0900100101: RNCC: 3 | RNVC: 2
900-100B: RNCC: 3 | RNVC: 2
0900100104: RNCC: 3 | RNVC: 2
101-BA-100: RNCC: 3 | RNVC: 2
E75-001PLATEAMAINBATARDE100: RNCC: 5 | RNVC: 2
101BATARDE100: RNCC: 5 | RNVC: 9

1 Jan 1965

5110-15-074-6871
Hand Cape Chisel

150746871
165-6ART364UC100UNI2955: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-195-0974
Knife Blade

151950974
UKBU50PK: RNCC: 3 | RNVC: 2
(241)A5200UKBU50PK: RNCC: 5 | RNVC: 2

25 Feb 2011

5110-14-201-0484
Hand File

142010484
NO PRIMARY REF14-201-0484: RNCC: 3 | RNVC: 2
2307: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-27-019-1551
Corner Bit Brace

270191551
901-YD-40: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-197-1683
Nested Saws

151971683
PN UAS 00036404: RNCC: 3 | RNVC: 2
3230F76031510: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-271-5957
Hand Reamer

142715957
E74111-15FS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-14-201-5286
Firmer Chisel

142015286
E73-201CISEAUDEMENUISIER6: RNCC: 2 | RNVC: 2
628-2LI0NS6: RNCC: 5 | RNVC: 2
628-6: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-264-4795
Hand Reamer

142644795
E74104-35-5FS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-15-074-6660
Hand Reamer

150746660
3UNI532ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-274-7977
Firmer Chisel

142747977
E73-201CISEAUDEMENUISIER30: RNCC: 2 | RNVC: 2
628-2LI0NS30: RNCC: 5 | RNVC: 2
628-30: RNCC: 5 | RNVC: 9
C111E30: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-157-7883
Hand Cold Chisel

151577883
34MM.125: RNCC: 3 | RNVC: 2
34MM.125: RNCC: 5 | RNVC: 1
(241)A087334MM.125: RNCC: 5 | RNVC: 2

20 Oct 2003

5110-15-074-5957
Hand File

150745957
6D140UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-370-1168
Hand File

143701168
TPARMD200: RNCC: 3 | RNVC: 2
130043: RNCC: 5 | RNVC: 2

18 May 1981

5110-15-053-2823
Hand Hacksaw Blade

150532823
61-3220N24DENTIXIN: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-291-8206
Bearing Scraper

142918206
231: RNCC: 3 | RNVC: 2
3148511545003: RNCC: 5 | RNVC: 2
91381611: RNCC: 5 | RNVC: 2
0715 74 51: RNCC: 5 | RNVC: 2
0154500: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-33-103-9203
Hand File

331039203
360.061: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-196-0647
Chisel Bar

151960647
PN UAS 00043289: RNCC: 3 | RNVC: 2
5120F76035603: RNCC: 5 | RNVC: 9

31 Mar 2004

5110-14-541-3840
Gimlet

145413840
17405: RNCC: 3 | RNVC: 2

3 Jun 2004

5110-15-074-5915
Hand File

150745915
D100UNI5495B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-199-0669
Hand Reamer

151990669
7730-7.5: RNCC: 3 | RNVC: 2
F7730-7.5: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-074-5883
Hand File

150745883
B150UNI5492B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6974
Firmer Chisel

150746974
45ART109: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-274-8067
Hand File

142748067
515-00-140: RNCC: 3 | RNVC: 2
2415-140-0: RNCC: 3 | RNVC: 2
683-140-0: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-14-344-5298
Hand File

143445298
C90979: RNCC: 3 | RNVC: 2
85-689-4237: RNCC: 6 | RNVC: 9

10 Aug 1977

5110-33-103-9194
Hand File

331039194
359.560: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-33-103-9117
Hand File

331039117
905.01020: RNCC: 3 | RNVC: 2
350.462: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-15-074-6707
Hand Reamer

150746707
20UNI538ACCIAI0CARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-244-0654
Hand Reamer

142440654
E74112-2,5: RNCC: 2 | RNVC: 2
20020-2,5: RNCC: 3 | RNVC: 2
R601-2,5: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-14-393-0327
Hand File

143930327
AIGDRD180T2: RNCC: 3 | RNVC: 2
3148516321206: RNCC: 5 | RNVC: 2

12 Apr 1984

5110-15-074-5867
Hand File

150745867
1-2D200UNI5489: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6094
Hand File

150746094
10INART104BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-188-3327
Hand File

151883327
991009: RNCC: 3 | RNVC: 2
17091: RNCC: 5 | RNVC: 2
991 I: RNCC: 5 | RNVC: 2
391346118905: RNCC: 6 | RNVC: 9

2 Sep 2009

5110-14-326-1095
Hand Reamer

143261095
E74112-15RS: RNCC: 2 | RNVC: 2

2 Jul 1975

5110-15-074-6145
Hand File

150746145
12-105MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-429-3066
Hand Reamer

144293066
853-600-074-0: RNCC: 3 | RNVC: 2

11 Jan 1989

5110-15-074-6627
Hand Reamer

150746627
13UNI532ACCIAI0CARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-103-9070
Hand File

331039070
350.082: RNCC: 3 | RNVC: 2

21 Jun 1995

5110-33-003-6153
Hand File

330036153
423600: RNCC: 3 | RNVC: 2

25 May 1998

5110-15-074-6967
Firmer Chisel

150746967
45ART108: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-542-2623
Knife Blade

145422623
810029008: RNCC: 3 | RNVC: 2
810029008: RNCC: 5 | RNVC: 9

8 Jul 2004

5110-15-219-3260
Pipe Cutter

152193260
VL394: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-554-9936
Bolt Cutter

145549936
559507: RNCC: 3 | RNVC: 2

17 Sep 2007

5110-15-071-3392
Hand Graver

150713392
1014Y138: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-106-6201
Hand Rasp

331066201
455403: RNCC: 3 | RNVC: 2

21 Apr 1999

5110-15-188-3348
Knife Blade

151883348
Q02200003: RNCC: 3 | RNVC: 2
220 CR: RNCC: 5 | RNVC: 2
14837: RNCC: 5 | RNVC: 2
391229124210: RNCC: 6 | RNVC: 9

2 Sep 2009

5110-15-206-3373
Coping Saw Blade

152063373
581230: RNCC: 3 | RNVC: 2
(241)AK761581230: RNCC: 5 | RNVC: 2

4 Jun 2012

5110-15-050-9077
Hand File

150509077
D200UNI5492B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-000-2786
Knife Blade

150002786
SO5233V: RNCC: 3 | RNVC: 2

14 Feb 2013

5110-15-202-6599
Knife Blade

152026599
030168: RNCC: 3 | RNVC: 2

12 Jun 2007

5110-27-023-8084
Hand Cold Chisel

270238084
05001FK0173: RNCC: 2 | RNVC: 1

7 Aug 2004

5110-15-074-6431
Hand Reamer

150746431
3UNI525TAGLIENTIELICACCLEGUTENS-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-33-003-6157
Hand Rasp

330036157
457605: RNCC: 3 | RNVC: 2

25 May 1998

5110-14-421-2376
Bolt Cutter

144212376
000500: RNCC: 3 | RNVC: 2
394127: RNCC: 3 | RNVC: 9

11 Jan 1988

5110-14-377-9460
Boiler Tube Cutter

143779460
200-719: RNCC: 3 | RNVC: 2

10 Jun 1982

5110-15-074-6304
Hand Reamer

150746304
10UNI525ACCLEGUTENS: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-103-9232
Hand File

331039232
360.651: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-074-6382
Hand Reamer

150746382
12UNI525ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-271-5883
Hand Reamer

142715883
E74111-4RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-206-2702
Craftsman's Knife

152062702
USAG 216N: RNCC: 3 | RNVC: 2

1 Jun 2012

5110-27-052-0363
Hand Drill

270520363
GBN3-28DRE: RNCC: 3 | RNVC: 2

15 Dec 2010

5110-14-472-3677
Hand File

144723677
850.F350: RNCC: 3 | RNVC: 2
3148512079200: RNCC: 5 | RNVC: 2
850.F 350: RNCC: 5 | RNVC: 2
850F350: RNCC: 5 | RNVC: 2
0714 61 72: RNCC: 5 | RNVC: 2
0207920: RNCC: 5 | RNVC: 9

19 Oct 1994

5110-14-450-6777
Hand File

144506777
NO PRIMARY REF14-450-6777: RNCC: 3 | RNVC: 2
AIGOV180T0: RNCC: 5 | RNVC: 2
91592353: RNCC: 5 | RNVC: 2

16 Oct 1991

5110-15-074-5930
Hand File

150745930
D200UNI5498: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-197-1691
Nested Saws

151971691
PN UAS 00025772: RNCC: 3 | RNVC: 2
5110F76011939: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-271-6148
Hand File

142716148
E75001LB200A: RNCC: 2 | RNVC: 2
0906200104: RNCC: 3 | RNVC: 2
102-BAT-200: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-14-455-0107
Dimpling Punch

144550107
853-910-010-0: RNCC: 3 | RNVC: 2

1 May 1992

5110-14-543-3308
File Handle

145433308
MP.3: RNCC: 3 | RNVC: 2

20 Oct 2004

5110-15-074-6881
Hand Cold Chisel

150746881
100-10FIG26: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-197-1704
Poising Saw

151971704
PN UAS 00022871: RNCC: 3 | RNVC: 2
5110F76009546: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-33-204-8285
Tube Cutter

332048285
63170: RNCC: 3 | RNVC: 2
63104: RNCC: 6 | RNVC: 9

9 Feb 2006

5110-15-074-6305
Hand Reamer

150746305
11UNI525ACCLEGUTENS: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6465
Hand Reamer

150746465
45UNI525TAGLIENTIELICACCLEGUTEN-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-201-1098
File Handle

152011098
MANICOPERLIMA: RNCC: 3 | RNVC: 2
(241)A1572MANICOPERLIMA: RNCC: 5 | RNVC: 2

29 May 2006

5110-33-106-1212
Hand File

331061212
402506: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-33-103-9175
Hand File

331039175
352.632: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-074-3263
Hand File

150743263
1-2D150UNI5487: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-3269
Hand File

150743269
1-2D450UNI5487: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-244-0640
Hand Reamer

142440640
E66012A10RS: RNCC: 2 | RNVC: 2

1 Jan 1968

5110-15-054-4808
Crosscut Hand Saw

150544808
5446: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-429-3069
Hand Reamer

144293069
853-600-077-0: RNCC: 3 | RNVC: 2

11 Jan 1989

5110-14-545-4055
Hand Wire Stripper

145454055
194.17VE: RNCC: 3 | RNVC: 2
D20-160: RNCC: 3 | RNVC: 2
3148511450093: RNCC: 5 | RNVC: 2
123M4940: RNCC: 5 | RNVC: 2
AA010673: RNCC: 6 | RNVC: 9

12 Apr 2005

5110-27-018-5167
Hand File Set

270185167
14001YP20868: RNCC: 2 | RNVC: 1
07705677191: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-074-6964
Firmer Chisel

150746964
32ART108: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-340-2605
Scraper Blade

143402605
662: RNCC: 3 | RNVC: 2

14 Feb 1977

5110-15-074-7064
Firmer Gouge

150747064
30ART113: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-189-0494
Poising Saw

151890494
358-9809: RNCC: 3 | RNVC: 2
(241)AA136358-9809: RNCC: 5 | RNVC: 2

20 Jan 2010

5110-14-437-7134
Hand Reamer

144377134
E74112-43-5RS: RNCC: 2 | RNVC: 2

14 Feb 1990

5110-33-200-1605
File Handle

332001605
53 770: RNCC: 3 | RNVC: 2

25 Oct 2001

5110-33-192-5290
Docking Hand Saw

331925290
8801.024: RNCC: 3 | RNVC: 2
1022.00220: RNCC: 5 | RNVC: 2

15 Feb 1994

5110-43-001-2506
Pliers

430012506
01-020: RNCC: 3 | RNVC: 2
5907558401646: RNCC: 5 | RNVC: 2
391124111603: RNCC: 6 | RNVC: 9

6 Jul 2011

5110-15-199-0937
Hand Reamer

151990937
7730-23: RNCC: 3 | RNVC: 2
F7730-23: RNCC: 5 | RNVC: 2

12 Jan 2005

Load More Results