What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 36 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 36of 112

5110-15-055-3620
Hand File

150553620
D175UNI5489B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-074-6373
Hand Reamer

150746373
3UNI525ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-103-9164
Hand Rasp

331039164
351.432: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-201-5292
Hand File

142015292
E75001LE200A: RNCC: 2 | RNVC: 2

1 Jan 1962

5110-33-003-6140
File Handle

330036140
4089-0: RNCC: 3 | RNVC: 2

25 May 1998

5110-14-273-7476
Hand Reamer

142737476
E74103-18RS: RNCC: 2 | RNVC: 2
8040021-18: RNCC: 3 | RNVC: 2
703CY18: RNCC: 3 | RNVC: 2
R603-18: RNCC: 3 | RNVC: 2
D6600.180: RNCC: 3 | RNVC: 2
SYQ1801: RNCC: 5 | RNVC: 2
166-18: RNCC: 5 | RNVC: 2
F1111-18: RNCC: 5 | RNVC: 2
1080-18: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-506-2476
Bolt Cutter Jaws

145062476
990.LA2: RNCC: 3 | RNVC: 2
990-LA2: RNCC: 5 | RNVC: 2
3148512174950: RNCC: 5 | RNVC: 2

15 Apr 1998

5110-33-107-7760
Hand Reamer Set

331077760
C 6627 053: RNCC: 3 | RNVC: 2

18 May 2000

5110-14-431-7296
Hand File

144317296
241-L200: RNCC: 3 | RNVC: 2

9 May 1989

5110-15-199-0813
Hand File

151990813
2601/3-8: RNCC: 3 | RNVC: 2
D2601/3-8: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-055-3636
Hand File

150553636
2-250UNI5512B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-299-3000
Doweling Jig

142993000
29020: RNCC: 3 | RNVC: 2
29020: RNCC: 5 | RNVC: 2

1 Jan 1973

5110-15-074-6331
Hand Reamer

150746331
45UNI525ACCLEGUT: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-155-9495
Hand Graver

331559495
313.430: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-15-074-6960
Firmer Chisel

150746960
25ART109: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6888
Hand Cold Chisel

150746888
175-22A25FIG24: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6666
Hand Reamer

150746666
13UNI532ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-025-0254
Adz Handle

270250254
05001-MS0002: RNCC: 2 | RNVC: 1
05001FS0186: RNCC: 2 | RNVC: 1

24 Dec 2004

5110-14-271-5953
Hand Reamer

142715953
E74111-12-5FS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-15-074-6142
Hand File

150746142
16-105BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-237-9475
Hand Reamer

142379475
E66003-23RS: RNCC: 2 | RNVC: 2

1 Jan 1967

5110-15-104-3892
Blacksmith's Chisel

151043892
10565/1: RNCC: 3 | RNVC: 2

30 May 1989

5110-15-074-6011
Hand File

150746011
110UNI5515: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-274-8061
Hand File

142748061
2402-140-0: RNCC: 3 | RNVC: 2
684-140-0: RNCC: 5 | RNVC: 2
MB140: RNCC: 5 | RNVC: 2
SYB0289: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-33-002-5837
Pliers

330025837
SER-702-764: RNCC: 3 | RNVC: 2

9 Mar 1995

5110-14-201-0488
Hand File

142010488
NO PRIMARY REF14-201-0488: RNCC: 3 | RNVC: 2
2315: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-206-8070
Hand Belt Cutter

142068070
NO PRIMARY REF14-206-8070: RNCC: 3 | RNVC: 2
600TER: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-14-213-5597
Hand File

142135597
E75001LB150A: RNCC: 2 | RNVC: 2

1 Jan 1964

5110-14-274-8052
Auger Handle

142748052
14-29TARIERE: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-14-410-0564
Hand Reamer

144100564
851-904-092-0: RNCC: 3 | RNVC: 2

4 Jun 1986

5110-15-196-9885
Hand File

151969885
PN UAS 00025768: RNCC: 3 | RNVC: 2
5110F76011919: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-074-6245
Hand Rasp

150746245
B200UNI5522: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-402-9074
Hand File

144029074
AIG.BAR160T2: RNCC: 3 | RNVC: 2
AIGBAR160T2: RNCC: 5 | RNVC: 2
3148516319609: RNCC: 5 | RNVC: 2
0631960: RNCC: 5 | RNVC: 9

25 Jul 1985

5110-15-009-8736
Hand File

150098736
2562/3/6: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-14-529-3839
Bolt Cutter

145293839
990.R: RNCC: 3 | RNVC: 2

28 Mar 2002

5110-15-006-0443
Firmer Chisel Set

150060443
794850 9: RNCC: 3 | RNVC: 2
(241)A0019794850 9: RNCC: 5 | RNVC: 2

12 Dec 2013

5110-15-116-3714
Hand Wire Stripper

151163714
11.41000.200: RNCC: 3 | RNVC: 2

28 Apr 1993

5110-14-201-6798
Hand Hacksaw Blade

142016798
E73-071-300X13X065: RNCC: 2 | RNVC: 2

1 Jan 1962

5110-33-103-9134
Hand File

331039134
350.671: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-14-235-4112
Hand Reamer

142354112
E66012A3-5RS: RNCC: 2 | RNVC: 2

1 Jan 1967

5110-15-054-1379
Rip Hand Saw

150541379
56-5-294-650: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-422-7346
Breast Drill

144227346
336483: RNCC: 3 | RNVC: 2
336483: RNCC: 5 | RNVC: 9

17 Mar 1988

5110-14-373-7806
Hand File

143737806
TRI.B200: RNCC: 3 | RNVC: 2
130220: RNCC: 5 | RNVC: 2
3148516045409: RNCC: 5 | RNVC: 2
TRIB200: RNCC: 5 | RNVC: 2
0714 61 16: RNCC: 5 | RNVC: 2
0604540: RNCC: 5 | RNVC: 9

13 Nov 1981

5110-15-074-5908
Hand File

150745908
B250UNI5495B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-196-9863
Hand File

151969863
PN UAS 00037667: RNCC: 3 | RNVC: 2
5110F76032240: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-074-6863
Hand Cape Chisel

150746863
200-8ART3616CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-106-1220
Hand File

331061220
412307: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-14-274-8355
Bearing Scraper

142748355
504-2: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-15-074-3274
Hand File

150743274
D300UNI5487B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-379-1248
Hand Reamer

143791248
14231-42860: RNCC: 3 | RNVC: 2

6 Sep 1982

5110-15-074-6108
Hand File

150746108
8INART103BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6159
Hand File

150746159
10-106MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-156-6038
Pocket Knife

331566038
850.380: RNCC: 3 | RNVC: 2

12 Sep 1995

5110-15-197-6303
Paper Cutter

151976303
PN UAS 00001509: RNCC: 3 | RNVC: 2
9999F76012460: RNCC: 5 | RNVC: 9

8 Apr 2004

5110-15-074-5985
Hand File

150745985
1-250UNI5511: RNCC: 2 | RNVC: 2
1250UNI5511: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6045
Hand File

150746045
B250UNI5501B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-192-9583
Rabbet Plane

151929583
0-16-050: RNCC: 3 | RNVC: 2
3253560160500: RNCC: 3 | RNVC: 2
(241)A61540-16-050: RNCC: 5 | RNVC: 2
(241)A61543253560160500: RNCC: 5 | RNVC: 2

30 Mar 2010

5110-15-074-6900
Hand Cold Chisel

150746900
300-15ART42410: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-156-5817
Hand Hacksaw Blade

331565817
429.032: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-33-005-4323
Hand File

330054323
4074 16CM. BASTA: RNCC: 3 | RNVC: 2
446906: RNCC: 5 | RNVC: 2

25 Jul 2001

5110-14-522-1523
Hand Reamer

145221523
33503210: RNCC: 3 | RNVC: 2

4 Oct 2000

5110-15-074-6235
Hand Rasp

150746235
B150UNI5525: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-054-4814
Hand Masonry Drill

150544814
3620: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-055-3612
Hand File

150553612
B225UNI5487B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-074-9028
Hand Reamer

150749028
28UNI525ACCSUPER: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6693
Hand Reamer

150746693
37-65UNI535ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-157-7882
Poising Saw

151577882
1727M: RNCC: 3 | RNVC: 2
1727M: RNCC: 5 | RNVC: 1
(241)A08731727M: RNCC: 5 | RNVC: 2

20 Oct 2003

5110-14-545-2850
Chisel Bar

145452850
143-6-N: RNCC: 3 | RNVC: 2

31 Mar 2005

5110-15-052-2434
Hand Reamer

150522434
64389-1: RNCC: 3 | RNVC: 2

15 Jun 1971

5110-15-000-2061
Poising Saw

150002061
581240: RNCC: 3 | RNVC: 2

8 Feb 2013

5110-15-074-6616
Hand Reamer

150746616
2UNI531ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-196-9893
Hand File

151969893
PN UAS 00025783: RNCC: 3 | RNVC: 2
5110F76013000: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-201-1121
Nested Saws

142011121
1-15-199: RNCC: 3 | RNVC: 2
2603: RNCC: 5 | RNVC: 9
B430A00: RNCC: 5 | RNVC: 9
D216: RNCC: 5 | RNVC: 9
316: RNCC: 5 | RNVC: 9
676: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-15-055-3574
Tailor's Shears

150553574
400-300: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-393-0328
Hand File

143930328
AIG.PAM160T2: RNCC: 3 | RNVC: 2
3148516319302: RNCC: 5 | RNVC: 2
AIGPAM160T2: RNCC: 5 | RNVC: 2
1028581W00: RNCC: 5 | RNVC: 2
0631930: RNCC: 5 | RNVC: 9

12 Apr 1984

5110-15-074-9026
Hand Reamer

150749026
25UNI525ACCSUPER: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-068-3826
Hand Cold Chisel

150683826
650/150: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-15-009-8733
Hand File

150098733
2562/1/6: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-27-016-0355
Turning Chisel

270160355
99999-NIIN-DA0037507: RNCC: 2 | RNVC: 1

17 Dec 2002

5110-15-074-6381
Hand Reamer

150746381
11UNI525ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6876
Hand Cold Chisel

150746876
180-19ART362: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-424-9760
Hand File Set

144249760
1889G3291: RNCC: 3 | RNVC: 2
1889G3291: RNCC: 5 | RNVC: 2
85-693-7375: RNCC: 6 | RNVC: 9

16 Jun 1988

5110-14-271-6037
Hand File

142716037
E75001LC250A: RNCC: 2 | RNVC: 2
109-BA-250: RNCC: 3 | RNVC: 2
0910250101: RNCC: 3 | RNVC: 2
910-250B: RNCC: 3 | RNVC: 2
0910250104: RNCC: 3 | RNVC: 2
MB25: RNCC: 5 | RNVC: 2
SYQ0921: RNCC: 5 | RNVC: 2

1 Jan 1970

5110-33-103-9262
Hand File

331039262
362.832: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-33-005-4256
Paper Cutter

330054256
4878.003: RNCC: 3 | RNVC: 2

23 Jul 2001

5110-15-074-6041
Hand File

150746041
1-1-2D250UNI5500: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-270-3995
Hand Reamer

142703995
E74104-40RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-074-5952
Hand File

150745952
31-2D140UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-273-7462
Hand Reamer

142737462
E74103-5RS: RNCC: 2 | RNVC: 2
8040021-5: RNCC: 3 | RNVC: 2
703CY5: RNCC: 3 | RNVC: 2
R603-5: RNCC: 3 | RNVC: 2
D6600.050: RNCC: 3 | RNVC: 2
SYQ1808: RNCC: 5 | RNVC: 2
166-5: RNCC: 5 | RNVC: 2
F1111-5: RNCC: 5 | RNVC: 2
1080-5: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-274-8366
Hand File

142748366
E75-002FENDANTE250D0UCE: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-14-274-8365
Hand File

142748365
E75-002FENDANTE250DEMID0UCE: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-14-556-1607
Bearing Scraper

145561607
SC1000: RNCC: 3 | RNVC: 2
A566187: RNCC: 5 | RNVC: 2

6 Feb 2008

5110-15-074-6000
Hand File

150746000
100UNI5516: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6073
Hand File

150746073
8INART101D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6121
Hand File

150746121
14INART103D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-270-3985
Hand Reamer

142703985
E66003-24RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-27-021-9080
Corner Bit Brace

270219080
3383: RNCC: 2 | RNVC: 1

13 Jan 2004

5110-33-004-1955
Hand Hacksaw Blade

330041955
1122.024: RNCC: 3 | RNVC: 2

3 Sep 1998

5110-14-273-7491
Hand Reamer

142737491
E74103-36RS: RNCC: 2 | RNVC: 2
1080-36: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-050-6107
Hand File

150506107
B150UNI5493B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-27-032-3549
Double Bit Ax

270323549
COK MAKSATLI: RNCC: 2 | RNVC: 1

26 Jun 2006

5110-33-103-9067
Hand File

331039067
350.072: RNCC: 3 | RNVC: 2

21 Jun 1995

5110-14-477-9323
Pinking Shears

144779323
974-016226-00: RNCC: 3 | RNVC: 2

4 Oct 1995

5110-14-273-7459
Hand Reamer

142737459
E74103-3-5RS: RNCC: 2 | RNVC: 2
R603-3-5: RNCC: 3 | RNVC: 2
166-3-5: RNCC: 3 | RNVC: 2
1080-3-5: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-411-4977
Pinking Shears

144114977
648-22: RNCC: 3 | RNVC: 2

6 Aug 1986

5110-14-543-3343
Hand File Set

145433343
AS.6L: RNCC: 3 | RNVC: 2

20 Oct 2004

5110-33-103-9166
Hand Rasp

331039166
351.452: RNCC: 3 | RNVC: 2

21 Sep 1996

5110-15-068-3938
Hand Reamer

150683938
12000-25: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-33-005-4423
File Handle

330054423
369.279: RNCC: 3 | RNVC: 2

25 Jul 2001

5110-15-054-1374
Bow Saw

150541374
5570-1000: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-429-3062
Hand Reamer

144293062
853-600-070-0: RNCC: 3 | RNVC: 2

11 Jan 1989

5110-15-197-1684
Nested Saws

151971684
PN UAS 00036405: RNCC: 3 | RNVC: 2
3230F76031511: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-27-020-0579
Scraper Blade

270200579
10131KR0118: RNCC: 2 | RNVC: 1
239.5X63.5X63.5X15: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-210-5444
Hand File

142105444
E75001LA150C: RNCC: 2 | RNVC: 2
0900150301: RNCC: 3 | RNVC: 2
0900150304: RNCC: 3 | RNVC: 2
101-DX-150: RNCC: 3 | RNVC: 2
900-150D: RNCC: 3 | RNVC: 2
0600660: RNCC: 5 | RNVC: 2
3148516006608: RNCC: 5 | RNVC: 2
PAMD150: RNCC: 5 | RNVC: 2
0714 61 10: RNCC: 5 | RNVC: 2
101D0UCE150: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-14-271-6142
Hand File

142716142
E75001LA350A: RNCC: 2 | RNVC: 2
900-350B: RNCC: 3 | RNVC: 2
0900350104: RNCC: 3 | RNVC: 2
101-BA-350: RNCC: 3 | RNVC: 2
0900350101: RNCC: 3 | RNVC: 2
0714 61 04: RNCC: 5 | RNVC: 2
101BATARDE350: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-14-274-8092
Hand File

142748092
2408-180-2: RNCC: 3 | RNVC: 2
508-0-180: RNCC: 3 | RNVC: 2
686-180-2: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-14-437-5757
Hand File

144375757
NO PRIMARY REF14-437-5757: RNCC: 3 | RNVC: 2
AIGCAR180T0: RNCC: 5 | RNVC: 2
91592361: RNCC: 5 | RNVC: 2

7 Feb 1990

5110-14-496-3087
Jeweler's Broach

144963087
EL62-1-14: RNCC: 3 | RNVC: 2
F300 0T 021 3763: RNCC: 6 | RNVC: 9

15 Oct 1997

5110-14-464-4966
Hand Reamer

144644966
854-600-032-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5110-14-431-4159
Hand Reamer

144314159
E74112-46-5RS: RNCC: 2 | RNVC: 2
164-46-5: RNCC: 3 | RNVC: 2

18 Apr 1989

5110-14-539-4409
Hand Hacksaw Blade

145394409
660A.8: RNCC: 3 | RNVC: 2
3148511888995: RNCC: 5 | RNVC: 2

14 Jan 2004

5110-14-285-4788
Jeweler's Saw Blade

142854788
NO PRIMARY REF14-285-4788: RNCC: 3 | RNVC: 2
M1: RNCC: 5 | RNVC: 2

1 Jan 1972

5110-27-013-3557
Bolt Cutter

270133557
10131KM0532: RNCC: 2 | RNVC: 1
03060103152: RNCC: 2 | RNVC: 1

6 Jun 2002

5110-15-074-7151
Blacksmith's Chisel

150747151
1-5UNI4133U52WC20-2955: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-423-2903
Hand Reamer

144232903
REGL10-12: RNCC: 3 | RNVC: 2
91620126: RNCC: 5 | RNVC: 2

14 Apr 1988

5110-15-020-1103
Single Bit Ax

150201103
13-006A03: RNCC: 3 | RNVC: 2
55.57.001.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5110-14-271-5997
File Handle

142715997
B54516-38A16: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-33-161-6795
Turning Gouge

331616795
95125: RNCC: 3 | RNVC: 2

13 Dec 1996

5110-15-074-6715
Hand Reamer

150746715
17UNI538ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6927
Firmer Chisel

150746927
20ART106CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6937
Firmer Chisel

150746937
10ART108: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-005-4399
Tube Cutter

330054399
276.035: RNCC: 3 | RNVC: 2

25 Jul 2001

5110-27-057-5869
Docking Hand Saw

270575869
BLITZ3: RNCC: 2 | RNVC: 1

7 Sep 2012

5110-15-120-9059
Hand Hacksaw Blade

151209059
200101: RNCC: 3 | RNVC: 2

4 Sep 1995

5110-15-074-7413
Hand Hacksaw Blade

150747413
13-32UNI4000ACCIAI0LAV0RAZI0NIA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-155-7070
Hand Graver

151557070
D641.76.779: RNCC: 3 | RNVC: 2
D64176779: RNCC: 3 | RNVC: 2

22 May 2002

5110-15-188-3329
Hand Rasp

151883329
09900117: RNCC: 3 | RNVC: 2
13045: RNCC: 5 | RNVC: 2
990 M PB: RNCC: 5 | RNVC: 2
391341145300: RNCC: 6 | RNVC: 9

2 Sep 2009

5110-33-102-3320
Bolt Cutter

331023320
297.008: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-33-106-1223
Hand File

331061223
418200: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-15-050-9073
Hand File

150509073
D150UNI5492B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-165-3717
Bolt Cutter

151653717
196050: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-074-6729
Hand Reamer

150746729
32UNI538ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-024-9758
Hand File Set

270249758
00101507: RNCC: 2 | RNVC: 1

22 Dec 2004

5110-15-165-2746
Hand Reamer

151652746
NA440257953D: RNCC: 3 | RNVC: 2
NA440257953D: RNCC: 5 | RNVC: 9

1 Nov 2002

5110-15-074-6158
Hand File

150746158
8-106MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-210-5431
Hand Rasp

142105431
E75001RC200B: RNCC: 2 | RNVC: 2
304M0YENNEPIQURE200: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-33-103-9116
Hand File

331039116
350.461: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-14-244-0641
Hand Reamer

142440641
E66012A11RS: RNCC: 2 | RNVC: 2

1 Jan 1968

5110-27-019-1552
Corner Bit Brace

270191552
901-YD-41: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-33-105-8796
Hand File

331058796
402704: RNCC: 3 | RNVC: 2

21 Nov 1997

5110-14-488-5525
Hand File

144885525
TRI.D150: RNCC: 3 | RNVC: 2
TRID150: RNCC: 5 | RNVC: 2
0714 61 23: RNCC: 5 | RNVC: 2
0604990: RNCC: 5 | RNVC: 2
3148516049902: RNCC: 5 | RNVC: 2

21 May 1997

5110-15-074-7036
Firmer Gouge

150747036
12ART112: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6712
Hand Reamer

150746712
8-5UNI538ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6034
Hand File

150746034
2-1-2D300UNI5500: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-048-3818
Corner Bit Brace

270483818
35H092: RNCC: 3 | RNVC: 2

5 Feb 2010

5110-15-074-6563
Hand Reamer

150746563
0-6UNI524ACCCARB0NI0SPECUTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-068-3912
Hand Reamer

150683912
12000-5,5: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-14-541-0205
Wood Scraper

145410205
6232080010: RNCC: 3 | RNVC: 2
3303806232017: RNCC: 5 | RNVC: 2

5 May 2004

5110-33-003-6136
Hand File

330036136
401509: RNCC: 3 | RNVC: 2

25 May 1998

5110-15-074-6329
Hand Reamer

150746329
42UNI525ACCLEGUT: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-156-5763
Scraper Blade

331565763
790.294: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-14-378-2692
Bearing Scraper

143782692
50204: RNCC: 3 | RNVC: 2
502/4: RNCC: 5 | RNVC: 2

20 Jul 1982

5110-14-280-1818
Hand File

142801818
E75001LH300A: RNCC: 4 | RNVC: 1

1 Jan 1971

5110-14-486-5661
Hand Reamer

144865661
RT15009: RNCC: 3 | RNVC: 2

25 Mar 1997

5110-15-074-7056
Firmer Gouge

150747056
15ART113: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6378
Hand Reamer

150746378
8UNI525ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-156-5759
Scraper Blade

331565759
790.216: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-33-103-9145
Hand Rasp

331039145
351.231: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-33-156-5814
Hand Hacksaw Blade

331565814
5160.00320: RNCC: 3 | RNVC: 2
803.131: RNCC: 3 | RNVC: 2
428.032: RNCC: 3 | RNVC: 2
603 300 133: RNCC: 5 | RNVC: 2

15 Feb 1994

5110-15-074-5852
Hand File

150745852
D200UNI5494: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-200-9620
Hand File

332009620
53280: RNCC: 3 | RNVC: 2

18 Apr 2002

5110-33-201-6113
Hand Hacksaw Frame

332016113
319700: RNCC: 3 | RNVC: 2

9 Sep 2002

5110-15-074-7025
Turning Chisel

150747025
12ART102CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6306
Hand Reamer

150746306
12UNI525ACCLEGUTENS: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-209-6771
Pipe Cutter

152096771
TT13.60: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-454-8797
Hand File

144548797
AIG.TRI140T2: RNCC: 3 | RNVC: 2
AIGTRI140T2: RNCC: 5 | RNVC: 2
3148516315403: RNCC: 5 | RNVC: 2
0631540: RNCC: 5 | RNVC: 9

24 Apr 1992

5110-14-540-8361
Back Saw

145408361
480606: RNCC: 3 | RNVC: 2

23 Apr 2004

5110-15-074-6918
Firmer Chisel

150746918
35ART106: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-203-4064
Bolt Cutter

332034064
8970.27500: RNCC: 3 | RNVC: 2

1 Apr 2004

5110-15-074-6246
Hand Rasp

150746246
B250UNI5522: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-197-1650
Single Bit Ax

151971650
PN UAS 00030408: RNCC: 3 | RNVC: 2
5110F76027416: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-074-6051
Hand File

150746051
250UNI5503: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-7435
Hand Hacksaw Blade

150747435
16-14UNI4000ACCIAI0RAPID0SUPER: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-155-1118
Hand File

331551118
LIMA PLANA PUNTA BASTA 4": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-15-124-9836
Bearing Scraper

151249836
987C-250: RNCC: 2 | RNVC: 3

8 Oct 1996

5110-14-274-8028
Ship Scraper

142748028
14-41FACEDR0ITE: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-14-553-5719
Hand Cold Chisel

145535719
263.G22: RNCC: 3 | RNVC: 2
3148511616437: RNCC: 5 | RNVC: 2

18 Apr 2007

5110-15-074-6143
Hand File

150746143
8-105MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-197-2087
Pipe Cutter

151972087
PN UAS 00013756: RNCC: 3 | RNVC: 2
5110F76024520: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-33-103-9222
Hand File

331039222
360.412: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-33-103-9243
Hand Rasp

331039243
361.261: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-27-000-8166
Bolt Cutter

270008166
2350 16 0042: RNCC: 3 | RNVC: 2

11 Jun 1991

5110-14-334-8084
Hand Cold Chisel

143348084
263.25: RNCC: 3 | RNVC: 2
263-25: RNCC: 5 | RNVC: 2
3148511615805: RNCC: 5 | RNVC: 2
0714 63 05: RNCC: 5 | RNVC: 2
0161580: RNCC: 5 | RNVC: 9

2 Jun 1976

5110-33-157-1602
Ladies' Scissors

331571602
880.508: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-074-6917
Firmer Chisel

150746917
32ART106: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-27-025-7878
Corner Bit Brace

270257878
2ABM 1IMZA 0001/23: RNCC: 2 | RNVC: 1

12 Apr 2005

5110-14-237-9480
Hand Reamer

142379480
E66003A29HS: RNCC: 2 | RNVC: 2
3088-29: RNCC: 5 | RNVC: 9

1 Jan 1967

5110-33-103-9096
Hand File

331039096
350.252: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-15-074-5865
Hand File

150745865
1-2D100UNI5489: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-488-5524
Hand File

144885524
TRI.MD150: RNCC: 3 | RNVC: 2
0714 61 19: RNCC: 5 | RNVC: 2
TRIMD150: RNCC: 5 | RNVC: 2
0604750: RNCC: 5 | RNVC: 2
3148516047502: RNCC: 5 | RNVC: 2

21 May 1997

5110-15-055-3628
Hand File

150553628
1-2D175UNI5492B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-074-6252
Hand Rasp

150746252
1-2D300UNI5522PIATTA: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5900
Hand File

150745900
D200UNI5492B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6220
Hand Rasp

150746220
1-2D200UNI5521: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-187-0202
Hand Wire Stripper

151870202
1142BM: RNCC: 3 | RNVC: 2
391129148203: RNCC: 6 | RNVC: 9
53190: RNCC: 6 | RNVC: 9
1142BM: RNCC: 6 | RNVC: 9

23 Jan 2009

5110-15-074-6653
Hand Reamer

150746653
13UNI532ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-216-9580
Bolt Cutter

152169580
0632: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-074-6849
Hand Cold Chisel

150746849
250-25ART32650: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-232-2171
Hand File

142322171
276: RNCC: 3 | RNVC: 2
M0B619: RNCC: 3 | RNVC: 2
0BERG495: RNCC: 3 | RNVC: 2
3148511636008: RNCC: 5 | RNVC: 2
3083: RNCC: 5 | RNVC: 2
0163600: RNCC: 5 | RNVC: 9

1 Jan 1967

5110-15-074-7057
Firmer Gouge

150747057
16ART113: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-197-2088
Pipe Cutter

151972088
PN UAS 00013754: RNCC: 3 | RNVC: 2
5110F76024298: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-27-025-9226
Corner Bit Brace

270259226
2ABMK 01291: RNCC: 2 | RNVC: 1

3 May 2005

5110-15-195-0971
Craftsman's Knife

151950971
LBUK3: RNCC: 3 | RNVC: 2
(241)A5200LBUK3: RNCC: 5 | RNVC: 2

25 Feb 2011

5110-15-196-9867
Hand File

151969867
PN UAS 00038655: RNCC: 3 | RNVC: 2
5120F76032736: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-295-6810
Hand Reamer

142956810
E74112-17RS: RNCC: 2 | RNVC: 2

1 Jan 1973

5110-33-103-9128
Hand File

331039128
350.651: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-33-192-5289
Docking Hand Saw

331925289
8801.022: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-074-6933
Firmer Chisel

150746933
40ART106CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6634
Hand Reamer

150746634
3UNI532ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-015-8817
Turning Chisel

270158817
99999-NIIN-DA0037500: RNCC: 2 | RNVC: 1

17 Dec 2002

5110-15-196-6921
Hand Hacksaw Frame

151966921
PN UAS 00025770: RNCC: 3 | RNVC: 2
5110F76011937: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-074-7426
Hand Hacksaw Blade

150747426
13-24UNI4000ACCIAI0RAPID0000ACCI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-7054
Firmer Gouge

150747054
12ART113: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-27-015-8113
Hand File Set

270158113
SET 6 AD: RNCC: 2 | RNVC: 1

13 Dec 2002

5110-33-108-5734
Pliers

331085734
N5730153: RNCC: 3 | RNVC: 2
USAG 156/160: RNCC: 5 | RNVC: 2

27 Oct 1998

5110-14-273-7473
Hand Reamer

142737473
E74103-15RS: RNCC: 2 | RNVC: 2
R603-15: RNCC: 3 | RNVC: 2
D6600.150: RNCC: 3 | RNVC: 2
8040021-15: RNCC: 3 | RNVC: 2
703CY15: RNCC: 3 | RNVC: 2
SYQ1798: RNCC: 5 | RNVC: 2
166-15: RNCC: 5 | RNVC: 2
F1111-15: RNCC: 5 | RNVC: 2
1080-15: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-33-103-9255
Hand File

331039255
362.632: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-074-3264
Hand File

150743264
1-20200UNI5487: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-050-9078
Hand File

150509078
1-2D250UNI5492B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-201-7234
Hand Reamer

142017234
E66011A5FN: RNCC: 2 | RNVC: 2

1 Jan 1962

5110-14-549-2085
Hand File Set

145492085
MOD.LIM: RNCC: 3 | RNVC: 2

9 Mar 2006

5110-33-156-5761
Scraper Blade

331565761
790.231: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-074-6517
Hand Reamer

150746517
13UNI525TAGLIENTIELICACCSUPERRA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-050-9105
Hand File

150509105
B150UNI5489A: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-074-6281
Hand Reamer

150746281
25UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-003-6154
Hand File

330036154
423907: RNCC: 3 | RNVC: 2

25 May 1998

5110-15-074-6641
Hand Reamer

150746641
16UNI532ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-159-3191
Ladies' Scissors

151593191
PN UAS 00039808: RNCC: 3 | RNVC: 2
5110F76033843: RNCC: 5 | RNVC: 9

31 Mar 2004

5110-14-311-9986
Hand Wire Stripper

143119986
935860: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-074-5810
Hand File

150745810
B125UNI5493B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-471-9902
Hand File

144719902
FRO.B300: RNCC: 3 | RNVC: 2
FR.OB300: RNCC: 5 | RNVC: 2
3148516478900: RNCC: 5 | RNVC: 2
FR.O B 300: RNCC: 5 | RNVC: 2
0647890: RNCC: 5 | RNVC: 9
FR0B300: RNCC: 5 | RNVC: 9

28 Sep 1994

5110-15-074-6908
Firmer Chisel

150746908
8ART106: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-103-9059
Hand File

331039059
350.033: RNCC: 3 | RNVC: 2

21 Jun 1995

5110-14-274-7907
Back Saw

142747907
235: RNCC: 3 | RNVC: 2
C268-25: RNCC: 3 | RNVC: 9
B530A25GOLDEBERG: RNCC: 3 | RNVC: 9
268-25: RNCC: 5 | RNVC: 2
4-1422-26: RNCC: 5 | RNVC: 9
2613: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-33-005-4324
Hand File

330054324
4074 16CM. FINA: RNCC: 3 | RNVC: 2
447507: RNCC: 5 | RNVC: 2

25 Jul 2001

5110-15-074-6928
Firmer Chisel

150746928
22ART106CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6615
Hand Reamer

150746615
1-5UNI531ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-137-9267
Pipe Cutter

151379267
0330002: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-074-6111
Hand File

150746111
14INART103BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6053
Hand File

150746053
200UNI5504: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6228
Hand Rasp

150746228
B300UNI5524: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-050-9103
Hand File

150509103
1-2D100UNI5489A: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-33-103-9108
Hand File

331039108
350.413: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-33-106-4500
Firmer Chisel

331064500
424-10: RNCC: 3 | RNVC: 2

9 Feb 1998

5110-15-159-9348
Hand Cable Stripper

151599348
SPLRG58/59: RNCC: 3 | RNVC: 2
(241)AE208SPLRG58/59: RNCC: 5 | RNVC: 2

15 Apr 2004

5110-15-221-6849
Pipe Cutter

152216849
5180RI0992112: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-074-6533
Hand Reamer

150746533
32UNI525TAGLIENTIELICACCSUPERRA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-14-370-1105
Hand File Set

143701105
AS.12LBP160T2: RNCC: 3 | RNVC: 2
130038: RNCC: 5 | RNVC: 2
0629800: RNCC: 5 | RNVC: 2
3148516298003: RNCC: 5 | RNVC: 2
AS12LBP160T2: RNCC: 5 | RNVC: 2

18 May 1981

5110-14-540-8533
Firmer Chisel

145408533
7011160201: RNCC: 3 | RNVC: 2
3303807011130: RNCC: 5 | RNVC: 2

23 Apr 2004

5110-15-199-0809
Hand File

151990809
2602/1-10: RNCC: 3 | RNVC: 2
D2602/1-10: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-270-3993
Hand Reamer

142703993
E74104-38RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-054-2304
Single Bit Ax

150542304
0545: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-27-019-8399
Turning Chisel

270198399
10091KLXL0014: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-351-7923
Hand Wire Stripper

143517923
05010001000: RNCC: 3 | RNVC: 2
3597470080276: RNCC: 5 | RNVC: 2
501-001: RNCC: 5 | RNVC: 2
501001: RNCC: 5 | RNVC: 2
DS3: RNCC: 5 | RNVC: 2

12 Sep 1978

5110-14-275-8963
Rip Hand Saw

142758963
F16-600: RNCC: 3 | RNVC: 2
4567-60: RNCC: 3 | RNVC: 9
319LI0N60: RNCC: 5 | RNVC: 2
2601-60: RNCC: 5 | RNVC: 9
160DE600: RNCC: 5 | RNVC: 9
3-160-60: RNCC: 5 | RNVC: 9
B410A60: RNCC: 5 | RNVC: 9
C319P60: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-074-6141
Hand File

150746141
14-105BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-199-0963
Broad Hatchet

151990963
3580-800: RNCC: 3 | RNVC: 2

12 Jan 2005

5110-15-199-0816
Hand File

151990816
2604/3-8: RNCC: 3 | RNVC: 2
D2604/3-8: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-196-0642
Firmer Chisel Set

151960642
PN UAS 00013801: RNCC: 3 | RNVC: 2
5120F76024495: RNCC: 5 | RNVC: 9

31 Mar 2004

5110-14-358-5616
Hand File

143585616
AIG.PAM100T2: RNCC: 3 | RNVC: 2
3148516312105: RNCC: 5 | RNVC: 2
AIGPAM100T2: RNCC: 5 | RNVC: 2
0631210: RNCC: 5 | RNVC: 9
AIGPAM: RNCC: 5 | RNVC: 9

7 Sep 1979

5110-33-003-6138
Hand File

330036138
402308: RNCC: 3 | RNVC: 2

25 May 1998

5110-14-315-0647
Hand Cold Chisel

143150647
252.8: RNCC: 3 | RNVC: 2
252-8: RNCC: 5 | RNVC: 2
3148511603000: RNCC: 5 | RNVC: 2
91574577: RNCC: 5 | RNVC: 2
0160300: RNCC: 5 | RNVC: 9

1 Jan 1975

5110-27-022-3636
Turning Chisel

270223636
10131MK1394: RNCC: 2 | RNVC: 1

27 Feb 2004

5110-27-054-7828
Scraper Blade

270547828
201194: RNCC: 2 | RNVC: 2

13 Oct 2011

5110-14-402-4281
Hand Cold Chisel

144024281
262.15: RNCC: 3 | RNVC: 2
262-15: RNCC: 5 | RNVC: 2
91604565: RNCC: 5 | RNVC: 2
0714 63 02: RNCC: 5 | RNVC: 2
3148511612309: RNCC: 5 | RNVC: 2
0161230: RNCC: 5 | RNVC: 9

3 Jul 1985

5110-14-254-0456
Hand Reamer

142540456
NF E 66-003/28,5: RNCC: 2 | RNVC: 2
8040101-28,5: RNCC: 3 | RNVC: 2
E66-003-28,5: RNCC: 5 | RNVC: 2
E74104-28-5FS: RNCC: 5 | RNVC: 2
TKF8040101-28,5: RNCC: 5 | RNVC: 9

1 Jan 1969

5110-14-530-5348
Bearing Scraper

145305348
C106-54001: RNCC: 3 | RNVC: 2

18 Jun 2002

5110-14-369-7123
Hand Reamer

143697123
E74112-28RS: RNCC: 2 | RNVC: 2
20020-28: RNCC: 3 | RNVC: 2

17 Apr 1981

5110-15-074-6601
Hand Reamer

150746601
1-5UNI531ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-483-0726
Hand Wire Stripper

144830726
838.CX58: RNCC: 3 | RNVC: 2
3148512068853: RNCC: 5 | RNVC: 2
0714 41 02: RNCC: 5 | RNVC: 2
0206885: RNCC: 5 | RNVC: 9

8 Aug 1996

5110-15-195-0208
Hand Hacksaw Blade

151950208
M70731063: RNCC: 3 | RNVC: 2
(241)A0302M70731063: RNCC: 5 | RNVC: 2

16 Feb 2011

5110-15-050-6053
Hand File

150506053
1-2D200UNI5501B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-068-3933
Hand Reamer

150683933
12000-20: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-33-203-4263
Hand Hacksaw Blade

332034263
DIN 6964: RNCC: 2 | RNVC: 2
5040.00240: RNCC: 3 | RNVC: 2
67FH: RNCC: 3 | RNVC: 2
803.021: RNCC: 3 | RNVC: 2
426.024: RNCC: 3 | RNVC: 2
1101.024: RNCC: 3 | RNVC: 2

2 Apr 2004

5110-14-489-5923
Ratchet Bit Brace

144895923
VILLE93871X00: RNCC: 3 | RNVC: 2

6 Aug 1997

5110-27-024-7462
Broad Hatchet

270247462
05001FB0116: RNCC: 2 | RNVC: 1

30 Nov 2004

5110-14-274-8371
Hand File

142748371
E75001LT250B: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-15-074-6183
Hand File

150746183
14-2621BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-391-6736
Hand File Set

143916736
AS.6L160T2: RNCC: 3 | RNVC: 2
0232387X00: RNCC: 5 | RNVC: 2
3148516293206: RNCC: 5 | RNVC: 2
91564498: RNCC: 5 | RNVC: 2
AS6L160T2: RNCC: 5 | RNVC: 2
0629320: RNCC: 5 | RNVC: 9

21 Mar 1984

5110-14-291-0913
Hardy

142910913
3839-150: RNCC: 3 | RNVC: 9

1 Jan 1972

5110-27-000-8001
Hand Cold Chisel

270008001
5500 20 0125: RNCC: 3 | RNVC: 2

23 Oct 1990

5110-33-192-5293
Keyhole Saw

331925293
8822.014: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-074-3275
Hand File

150743275
D350UNI5487: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5906
Hand File

150745906
B150UNI5495B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-221-6795
Hand Drill

152216795
5120RN0402799: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-074-7021
Turning Chisel

150747021
4ART102CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-27-019-8401
Turning Chisel

270198401
10091KLXL0017: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-33-003-6146
Hand File

330036146
413908: RNCC: 3 | RNVC: 2

25 May 1998

5110-15-074-6214
Hand Rasp

150746214
1-2D400UNI5523: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-412-5258
Single Bit Ax

144125258
641191: RNCC: 3 | RNVC: 2

15 Oct 1986

5110-15-074-6874
Hand Cold Chisel

150746874
150-15ART362: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6890
Hand Cold Chisel

150746890
200-22A25FIG24: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-103-9190
Hand File Set

331039190
359.000: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-33-001-4429
Hatchet Handle

330014429
92026315: RNCC: 3 | RNVC: 2

12 Mar 1997

5110-15-074-5995
Hand File

150745995
110UNI5517: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6070
Hand File

150746070
12INART101MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6584
Hand Reamer

150746584
0-6UNI524ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-155-7123
Hand Reamer

151557123
S2003: RNCC: 3 | RNVC: 2

23 May 2002

5110-15-074-6682
Hand Reamer

150746682
17-35UNI535ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6023
Hand File

150746023
150UNI5518: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5843
Hand File

150745843
D-2B150UNI5494B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-556-1636
Bearing Scraper

145561636
D.1: RNCC: 3 | RNVC: 2
018120: RNCC: 5 | RNVC: 2
91876297: RNCC: 5 | RNVC: 2

7 Feb 2008

5110-15-155-7126
Hand Reamer

151557126
S2199: RNCC: 3 | RNVC: 2

23 May 2002

5110-14-274-8065
Hand File

142748065
2411-140-0: RNCC: 3 | RNVC: 2
511-00-180: RNCC: 3 | RNVC: 2
689-140-0: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-14-476-3077
Hand Reamer

144763077
884992-9: RNCC: 3 | RNVC: 2
884992: RNCC: 3 | RNVC: 2
RAB3888: RNCC: 5 | RNVC: 2
884992: RNCC: 5 | RNVC: 9

6 Jun 1995

5110-14-465-6531
Hand Reamer

144656531
851-600-435-0: RNCC: 3 | RNVC: 2

6 Oct 1993

5110-15-074-5848
Hand File

150745848
1-2D400UNI5494: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-176-1733
Bolt Cutter

151761733
1880/2-910: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-074-6591
Hand Reamer

150746591
0-6UNI531ACCIAI0CARBSPECUTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-117-1222
Hand File Set

151171222
990/SE 5: RNCC: 3 | RNVC: 2
164897460: RNCC: 5 | RNVC: 2

5 Aug 1993

5110-33-205-4490
Hand Cold Chisel

332054490
5825-18X300 CP: RNCC: 3 | RNVC: 2
8414299038606: RNCC: 5 | RNVC: 2

9 Oct 2006

5110-15-074-6241
Hand Rasp

150746241
1-2D200UNI5525T0NDA: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5987
Hand File

150745987
2-175UNI5511: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-7019
Turning Chisel

150747019
35ART102: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-555-9217
Nozzle Broach Set

145559217
6525953: RNCC: 3 | RNVC: 2

8 Jan 2008

5110-27-029-6105
File Handle

270296105
4191100: RNCC: 2 | RNVC: 1

20 Apr 2006

5110-14-485-0295
Hand File

144850295
TRI.MD200EM: RNCC: 3 | RNVC: 2
TRI-MD200EM: RNCC: 5 | RNVC: 2
3148516511805: RNCC: 5 | RNVC: 2
0651180: RNCC: 5 | RNVC: 9

19 Dec 1996

5110-15-065-9711
Hand File

150659711
62321-35/203: RNCC: 3 | RNVC: 2

8 Aug 1985

5110-14-210-7130
Saw Handle

142107130
NO PRIMARY REF14-210-7130: RNCC: 3 | RNVC: 2
B0I2-343-3: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-15-074-6068
Hand File

150746068
8INART101MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-200-3182
Hand File Set

332003182
266/20: RNCC: 3 | RNVC: 2

14 Dec 2001

5110-14-305-1999
Brick Chisel

143051999
NO PRIMARY REF14-305-1999: RNCC: 3 | RNVC: 2
15-6062-4: RNCC: 5 | RNVC: 9

1 Jan 1974

5110-15-152-9215
Hand File

151529215
164897168: RNCC: 3 | RNVC: 2
2600/2-6: RNCC: 5 | RNVC: 2

7 Nov 2000

5110-14-511-7456
Pocket Knife

145117456
840.3: RNCC: 3 | RNVC: 2

13 Jan 1999

5110-14-228-7740
Hand File

142287740
E75001LK150A: RNCC: 2 | RNVC: 2
0923150101: RNCC: 3 | RNVC: 2
923-150B: RNCC: 3 | RNVC: 2

1 Jan 1966

5110-14-244-3690
Hand Reamer

142443690
E74111-21FS: RNCC: 2 | RNVC: 2
20020-21: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-14-369-7121
Hand Reamer

143697121
E74112-21RS: RNCC: 2 | RNVC: 2
F-P-21: RNCC: 3 | RNVC: 2
164-21: RNCC: 3 | RNVC: 2

17 Apr 1981

5110-14-337-4002
Hand Reamer

143374002
613-24A29-5: RNCC: 3 | RNVC: 9
85-688-4645: RNCC: 6 | RNVC: 9

7 Oct 1976

5110-14-274-8299
Hand File

142748299
2415-140-4: RNCC: 3 | RNVC: 2
PLATEP0INTUEAB0RDSR0NDS140-4: RNCC: 3 | RNVC: 2
515-2-140: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-14-201-0487
Hand File

142010487
NO PRIMARY REF14-201-0487: RNCC: 3 | RNVC: 2
2301: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-450-0197
Knife Blade

144500197
844.S18L10: RNCC: 3 | RNVC: 2
844S18L10: RNCC: 5 | RNVC: 2
91629332: RNCC: 5 | RNVC: 2
230/522/5: RNCC: 5 | RNVC: 2
3148512071006: RNCC: 5 | RNVC: 2
236-1133: RNCC: 5 | RNVC: 2
0207100: RNCC: 5 | RNVC: 9
FACOM844.S18L10: RNCC: 5 | RNVC: 9

18 Sep 1991

5110-15-179-4954
Firmer Chisel

151794954
0-16-870: RNCC: 3 | RNVC: 2
00.07.23.44: RNCC: 5 | RNVC: 2

22 Jan 2007

5110-15-074-7014
Turning Chisel

150747014
15ART102: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6539
Hand Reamer

150746539
42UNI525TAGLIENTIELICACCSUPERRA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-6869
Hand Cape Chisel

150746869
130-4ART364UC100UNI2955: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6519
Hand Reamer

150746519
15UNI525TAGLIENTIELICACCSUPERRA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-6030
Hand File

150746030
2D300UNI5500: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5841
Hand File

150745841
1-2D100UNI5494: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-244-0827
Hand Reamer

142440827
E74111-26FS: RNCC: 2 | RNVC: 2

1 Jan 1968

5110-14-244-0911
Hand Reamer

142440911
NF E 66-003/32,5: RNCC: 2 | RNVC: 2
8040101-32,5: RNCC: 3 | RNVC: 2
E66003-32,5: RNCC: 5 | RNVC: 2
E74104-32-5FS: RNCC: 5 | RNVC: 2
TKF8040101-32,5: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-14-370-1184
Hand File

143701184
TRI.MD150EM: RNCC: 3 | RNVC: 2
TRIMD150EM: RNCC: 3 | RNVC: 2
102017: RNCC: 5 | RNVC: 2
3148516511508: RNCC: 5 | RNVC: 2

18 May 1981

5110-14-232-3907
Woodcarving Gouge

142323907
4600-8: RNCC: 3 | RNVC: 9

1 Jan 1967

5110-15-074-5999
Hand File

150745999
200UNI5517: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-508-4343
Hand Hacksaw Blade

145084343
660A.12: RNCC: 3 | RNVC: 2
2695 025 232: RNCC: 5 | RNVC: 2
0191922: RNCC: 5 | RNVC: 2
660-12: RNCC: 5 | RNVC: 2
235-4494: RNCC: 5 | RNVC: 2
FACOM660A.12: RNCC: 5 | RNVC: 9

9 Sep 1998

5110-14-447-1338
Dimpling Punch

144471338
851-910-112-6: RNCC: 3 | RNVC: 2

3 May 1991

5110-14-201-7245
Hand Reamer

142017245
E74104-120RN: RNCC: 2 | RNVC: 2
3088-12: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-15-175-9781
End Cutting Nippers

151759781
1092V-200: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-074-6091
Hand File

150746091
14INART102D0LCEB: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-3260
Hand File

150743260
B400UNI5487B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-323-9254
Drilling Post

143239254
E130A8: RNCC: 3 | RNVC: 2
E130A6: RNCC: 5 | RNVC: 2

1 Jan 1975

5110-15-155-6173
Hand Cold Chisel

151556173
(241)A5682SCAP300X24: RNCC: 3 | RNVC: 2
SCAP 300X24: RNCC: 3 | RNVC: 2

30 Apr 2002

5110-15-199-0986
Firmer Chisel

151990986
6055/1-26: RNCC: 3 | RNVC: 2
B6055/1-26: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-329-5242
Ladies' Scissors

143295242
686-5-5: RNCC: 3 | RNVC: 2

2 Jul 1975

5110-15-074-6646
Hand Reamer

150746646
2-5UNI532ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6578
Hand Reamer

150746578
0-8UNI524ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6603
Hand Reamer

150746603
2-5UNI531ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-196-9880
Hand File

151969880
PN UAS 00025769: RNCC: 3 | RNVC: 2
5110F76011920: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-489-9589
Circle Cutter

144899589
245A.C: RNCC: 3 | RNVC: 2
0158193: RNCC: 5 | RNVC: 2
3148511581933: RNCC: 5 | RNVC: 2
SYQ5184: RNCC: 5 | RNVC: 2

1 Sep 1997

5110-15-074-6153
Hand File

150746153
8-106B: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6099
Hand File

150746099
10INART104MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-5914
Hand File

150745914
1-2D300UNI5495: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5819
Hand File

150745819
1-2D150UNI5493: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-522-1521
Hand Reamer

145221521
33503101: RNCC: 3 | RNVC: 2

4 Oct 2000

5110-15-074-5978
Hand File

150745978
1GUNI5568: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-274-7983
Turning Chisel

142747983
101-25EMMANCHE: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-33-103-9251
Hand Rasp

331039251
361.452: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-074-6914
Firmer Chisel

150746914
22ART106: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-5982
Hand File

150745982
1-150UNI5511: RNCC: 2 | RNVC: 2
1150UNI5511: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-196-9864
Hand File

151969864
PN UAS 00038654: RNCC: 3 | RNVC: 2
5120F76032735: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-213-5596
Hand File

142135596
E75001LB100C: RNCC: 2 | RNVC: 2

1 Jan 1964

5110-15-074-6460
Hand Reamer

150746460
36UNI525TAGLIENTIELICACCLEGUTEN-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-33-202-0441
Tube Cutter

332020441
7100400: RNCC: 3 | RNVC: 2

30 Dec 2002

5110-15-179-4417
Craftsman's Knife

151794417
2KL: RNCC: 3 | RNVC: 2
00.21.14.77: RNCC: 5 | RNVC: 2

28 Nov 2006

5110-15-199-0939
Hand Reamer

151990939
7730-21: RNCC: 3 | RNVC: 2
F7730-21: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-271-6047
Hand File

142716047
E75001LE350B: RNCC: 2 | RNVC: 2
0912350201: RNCC: 3 | RNVC: 2
912-350DD: RNCC: 3 | RNVC: 2
0912350204: RNCC: 3 | RNVC: 2
112-MID-350: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-15-074-6734
Hand Reamer

150746734
20UNI538ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6223
Hand Rasp

150746223
1-2D350UNI5521: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-106-1228
Hand Rasp

331061228
462807: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-15-074-6867
Hand Cold Chisel

150746867
165-16ART362UC100UNI2955: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-103-9075
Hand File

331039075
350.132: RNCC: 3 | RNVC: 2

22 Jun 1995

5110-14-541-0242
Firmer Chisel

145410242
7011080201: RNCC: 3 | RNVC: 2
3303807011031: RNCC: 5 | RNVC: 2

5 May 2004

5110-14-530-2008
Hand File

145302008
AIG.FS140T2: RNCC: 3 | RNVC: 2
3148516314505: RNCC: 5 | RNVC: 2

22 May 2002

5110-15-074-3283
Hand File

150743283
B350UNI5488B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-188-5410
Poising Saw

151885410
MK111: RNCC: 3 | RNVC: 2
(241)AF120MK111: RNCC: 5 | RNVC: 2

5 Oct 2009

5110-14-319-0634
Hand Wire Stripper

143190634
175.A: RNCC: 3 | RNVC: 2
91490747: RNCC: 5 | RNVC: 2
0140400: RNCC: 5 | RNVC: 2
175A: RNCC: 5 | RNVC: 2
3148511404003: RNCC: 5 | RNVC: 2
0181060M00: RNCC: 5 | RNVC: 2
140400175A: RNCC: 5 | RNVC: 9

1 Jan 1975

5110-15-195-9479
Hand File

151959479
017200110: RNCC: 3 | RNVC: 2

30 May 2011

5110-14-379-1241
Hand Reamer

143791241
14231-42796: RNCC: 3 | RNVC: 2

6 Sep 1982

5110-15-196-8791
Ratchet Drill

151968791
PN UAS 00041525: RNCC: 3 | RNVC: 2
2540F76034802: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-074-6975
Firmer Chisel

150746975
50ART109: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-103-9110
Hand File

331039110
350.422: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-15-074-7429
Hand Hacksaw Blade

150747429
16-18UNI4000ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-046-3471
Pipe Cutter

270463471
6865 18 1050: RNCC: 2 | RNVC: 1

30 Jul 2009

5110-33-005-4439
Pliers

330054439
8.360: RNCC: 3 | RNVC: 2

25 Jul 2001

5110-15-157-7880
Poising Saw

151577880
1726B: RNCC: 3 | RNVC: 2
1726B: RNCC: 5 | RNVC: 1
(241)A08731726B: RNCC: 5 | RNVC: 2

20 Oct 2003

5110-15-074-9029
Hand Reamer

150749029
30UNI525ACCSUPER: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6909
Firmer Chisel

150746909
10ART106: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6931
Firmer Chisel

150746931
32ART106CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-27-000-8010
Hand Cold Chisel

270008010
5500 40 0175: RNCC: 3 | RNVC: 2

23 Oct 1990

5110-15-074-6720
Hand Reamer

150746720
32UNI538ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-007-9385
Saw Handle

270079385
5891 34 0830: RNCC: 2 | RNVC: 1

26 Apr 2000

5110-14-271-5924
Hand Reamer

142715924
E74111-19-5RS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-14-436-4256
Hand File

144364256
104L350: RNCC: 3 | RNVC: 2
0904350204: RNCC: 3 | RNVC: 2
103-MD-350: RNCC: 3 | RNVC: 2

3 Jan 1990

5110-15-054-1375
Rip Hand Saw

150541375
5445-400: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-33-108-0332
Hatchet Handle

331080332
-99558-G970X: RNCC: 3 | RNVC: 2

23 Nov 2000

5110-15-074-6544
Hand Reamer

150746544
50UNI525TAGLIENTIELICAACCSUPERR-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-33-103-9205
Hand File

331039205
360.111: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-244-0927
Hand Reamer

142440927
NF E 66-003/21,5: RNCC: 2 | RNVC: 2
8040101-21,5: RNCC: 3 | RNVC: 2
E74104-21-5FS: RNCC: 5 | RNVC: 2
E66003-21,5: RNCC: 5 | RNVC: 2
TKF8040101-21,5: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-15-074-5950
Hand File

150745950
51-2D160UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6377
Hand Reamer

150746377
7UNI525ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-211-6683
Pipe Cutter

152116683
TC2QA: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-121-4583
Paper Cutter

151214583
3703.00210: RNCC: 3 | RNVC: 2
3703.00210: RNCC: 5 | RNVC: 9

31 May 1996

5110-33-102-3322
Bolt Cutter

331023322
297.107: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-101-9826
End Cutting Nippers

151019826
185NT: RNCC: 3 | RNVC: 2

31 Mar 1988

5110-14-200-8651
Hand Rasp

142008651
E75001RB250A: RNCC: 2 | RNVC: 2

1 Jan 1962

5110-15-074-5846
Hand File

150745846
1-2D300UNI5494: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6057
Hand File

150746057
250UNI5505: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6870
Hand Cape Chisel

150746870
150-6ART364UC100UNI2955: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6288
Hand Reamer

150746288
36UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-7016
Turning Chisel

150747016
20ART102: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-156-6029
Hand Cable Stripper

331566029
790.116: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-074-7018
Turning Chisel

150747018
30ART102: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-100-4091
Scraper Blade

151004091
23747: RNCC: 3 | RNVC: 2

27 Feb 1986

5110-33-161-6822
Single Bit Ax

331616822
31.31: RNCC: 2 | RNVC: 2

11 Jul 1995

5110-14-405-5874
Bolt Cutter

144055874
999 R4: RNCC: 3 | RNVC: 2

4 Dec 1985

5110-15-074-7008
Turning Chisel

150747008
4ART102: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6649
Hand Reamer

150746649
5UNI532ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-378-2683
Hand Reamer

143782683
E66-003-6-5HELIC0IDALRS: RNCC: 2 | RNVC: 2
169-6,5: RNCC: 3 | RNVC: 2

20 Jul 1982

5110-14-203-0047
Pocket Knife

142030047
NO PRIMARY REF14-203-0047: RNCC: 3 | RNVC: 2
1-202C0UTEAUGENIE: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-15-203-6851
Craftsman's Knife

152036851
02160001: RNCC: 3 | RNVC: 2

24 Jun 2011

5110-14-220-8458
Hand Cold Chisel

142208458
BB11-250: RNCC: 3 | RNVC: 9

1 Jan 1965

5110-15-196-0641
Firmer Chisel Set

151960641
PN UAS 00049349: RNCC: 3 | RNVC: 2
5120F76039996: RNCC: 5 | RNVC: 9

31 Mar 2004

5110-15-074-3273
Hand File

150743273
D250UNI5487B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-449-0831
Hand File

144490831
510-3-180: RNCC: 3 | RNVC: 2

24 Jul 1991

5110-15-155-7129
Hand Reamer

151557129
S2384: RNCC: 3 | RNVC: 2

23 May 2002

5110-15-050-6041
Hand File

150506041
B200UNI5487B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-33-103-9241
Hand Rasp

331039241
361.251: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-503-5444
Pocket Knife

145035444
16594: RNCC: 3 | RNVC: 2

20 Jan 1998

5110-15-074-6303
Hand Reamer

150746303
9UNI525ACCLEGUTENS: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6708
Hand Reamer

150746708
23UNI538ACCIAI0CARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-463-7590
Pocket Knife

144637590
COUTEAU MULTI-LAMES: RNCC: 3 | RNVC: 2
13603 SPARTAN: RNCC: 5 | RNVC: 2
996 700 100 000: RNCC: 6 | RNVC: 9

28 Jun 1993

5110-15-074-3277
Hand File

150743277
D450UNI5487: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-393-0333
Hand File

143930333
PAM.MD200EM: RNCC: 3 | RNVC: 2
PAMMD200EM: RNCC: 5 | RNVC: 2
3148516508201: RNCC: 5 | RNVC: 2

12 Apr 1984

5110-15-068-3932
Hand Reamer

150683932
12000-19: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-15-236-8895
Pipe Cutter

152368895
TATU701: RNCC: 3 | RNVC: 2
511015E052147: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-199-0859
Hand Cold Chisel

151990859
3602/2-5: RNCC: 3 | RNVC: 2
C3602/2-5: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-068-3939
Hand Reamer

150683939
12000-26: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-33-205-4596
Pocket Knife

332054596
3641760: RNCC: 3 | RNVC: 2

18 Oct 2006

5110-15-207-7749
Bearing Scraper Set

152077749
ART.1717C: RNCC: 3 | RNVC: 2
(241)A0873ART.1717C: RNCC: 5 | RNVC: 2

19 Nov 2012

5110-15-074-5894
Hand File

150745894
1-2D300UNI5492: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-009-8728
Hand File

150098728
2560/3/10: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-14-201-3835
Bolt Cutter

142013835
4303-2: RNCC: 3 | RNVC: 2
450-750: RNCC: 3 | RNVC: 2
0219664: RNCC: 3 | RNVC: 2
158-2: RNCC: 3 | RNVC: 2
998.R2: RNCC: 5 | RNVC: 2
999R2: RNCC: 5 | RNVC: 2

1 Jan 1962

5110-27-019-8397
Turning Chisel

270198397
10091KLXL0012: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-274-8090
Hand File

142748090
2402-180-2: RNCC: 3 | RNVC: 2
684-180-2: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-33-103-9211
Hand File

331039211
360.161: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-249-9383
Hand Reamer

142499383
E66003A13-5HS: RNCC: 2 | RNVC: 2
3088-13-5: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-15-068-8031
End Cutting Nippers

150688031
T61: RNCC: 3 | RNVC: 2

19 Jun 1986

5110-14-274-8292
Hand File

142748292
2410-140-4: RNCC: 3 | RNVC: 2
4476-140-4: RNCC: 3 | RNVC: 2
510-2-140: RNCC: 3 | RNVC: 2
1557: RNCC: 5 | RNVC: 2
RD140: RNCC: 5 | RNVC: 2
SYQ0916: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-15-074-6678
Hand Reamer

150746678
45-75UNI535ACCIAI0CARB0NI0SPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-238-5453
File Handle

142385453
B54516-38A27: RNCC: 2 | RNVC: 2

1 Jan 1967

5110-15-074-6510
Hand Reamer

150746510
6UNI525TAGLIENTIELICACCSUPERRAP-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-7044
Firmer Gouge

150747044
26ART112: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-273-7487
Hand Reamer

142737487
E74103-30RS: RNCC: 2 | RNVC: 2
R603-30: RNCC: 3 | RNVC: 2
166-30: RNCC: 3 | RNVC: 2
1080-30: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-33-103-9258
Hand File

331039258
362.722: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-074-7067
Firmer Gouge

150747067
40ART113: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6631
Hand Reamer

150746631
30UNI532ACCIAI0CARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6332
Hand Reamer

150746332
46UNI525ACCLEGUT: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-155-7125
Hand Reamer

151557125
S2198: RNCC: 3 | RNVC: 2

23 May 2002

5110-14-274-8076
Hand File

142748076
2406-140-2: RNCC: 3 | RNVC: 2
506-0-140: RNCC: 3 | RNVC: 2
682-140-2: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-15-074-7010
Turning Chisel

150747010
8ART102: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6388
Hand Reamer

150746388
18UNI525ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6300
Hand Reamer

150746300
6UNI525ACCLEGUTENS: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-210-4750
Pipe Cutter

152104750
EX9900RP2798688: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-152-8816
Hand Cold Chisel

151528816
362L150: RNCC: 3 | RNVC: 2
164897159: RNCC: 5 | RNVC: 2

7 Nov 2000

5110-15-217-9666
Pipe Cutter

152179666
EGO701: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-33-005-4416
Hand File

330054416
350.431: RNCC: 3 | RNVC: 2
905.00610: RNCC: 3 | RNVC: 2

25 Jul 2001

5110-27-016-6772
Hand Cold Chisel

270166772
04050105415: RNCC: 2 | RNVC: 1

26 Feb 2003

5110-14-429-6282
Hand Reamer

144296282
321A97-2628-20: RNCC: 3 | RNVC: 2
85-693-7748: RNCC: 6 | RNVC: 9

6 Feb 1989

5110-15-178-6119
Hand Hacksaw Frame

151786119
0135PLUS: RNCC: 3 | RNVC: 2
02.13.78.38: RNCC: 5 | RNVC: 2

17 Aug 2005

5110-15-203-6872
Tube Cutter

152036872
V210443: RNCC: 3 | RNVC: 2

24 Jun 2011

5110-14-264-0741
Hand Cold Chisel

142640741
3442302: RNCC: 3 | RNVC: 2
3-175: RNCC: 3 | RNVC: 2
3272670301511: RNCC: 5 | RNVC: 2
M100A18GOLDENBER: RNCC: 5 | RNVC: 9
1632-180X20: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-15-199-0815
Hand File

151990815
2604/2-10: RNCC: 3 | RNVC: 2
D2604/2-10: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-549-4183
Hand File

145494183
AIG.RD180T2: RNCC: 3 | RNVC: 2

31 Mar 2006

5110-14-464-4951
Hand Reamer

144644951
854-600-017-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5110-14-338-3808
Woodcarving Gouge

143383808
E73-201G0UGEBISEAUEXTERIEUR18: RNCC: 2 | RNVC: 2
2806061: RNCC: 5 | RNVC: 9
C311E18: RNCC: 5 | RNVC: 9

6 Nov 1976

5110-15-074-6458
Hand Reamer

150746458
34UNI525TAGLIENTIELICACCLEGUTEN-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-6864
Hand Cape Chisel

150746864
250-9ART3616CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-231-7909
Hand File

142317909
NO PRIMARY REF14-231-7909: RNCC: 3 | RNVC: 2
1683BATARDE: RNCC: 5 | RNVC: 9

1 Jan 1967

5110-14-522-1525
Hand Reamer

145221525
33503212: RNCC: 3 | RNVC: 2

4 Oct 2000

5110-33-103-9058
Hand File

331039058
350.032: RNCC: 3 | RNVC: 2

21 Jun 1995

5110-27-043-7680
Hand Drill

270437680
XT 183 BK: RNCC: 2 | RNVC: 1

15 Dec 2008

Load More Results