What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 35 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 35of 112

5110-15-074-6441
Hand Reamer

150746441
13UNI525TAGLIENTIELICACCLEGUTEN-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-156-3054
Hand Reamer

151563054
99390310: RNCC: 3 | RNVC: 2
790984: RNCC: 5 | RNVC: 2

17 Jan 2003

5110-33-200-2588
Hand File

332002588
4072 16CM. BASTA: RNCC: 3 | RNVC: 2
445305: RNCC: 5 | RNVC: 2

20 Nov 2001

5110-33-005-4326
Hand File

330054326
4075 16CM. FINA: RNCC: 3 | RNVC: 2
448504: RNCC: 5 | RNVC: 2

25 Jul 2001

5110-33-154-9095
Bow Saw

331549095
9023.521: RNCC: 3 | RNVC: 2
9023.521: RNCC: 3 | RNVC: 2

24 Jan 1991

5110-15-165-7432
End Cutting Nippers

151657432
570160: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-202-8639
Poising Saw

152028639
D2795-4000: RNCC: 3 | RNVC: 2
(241)AG412D2795-4000: RNCC: 5 | RNVC: 2

27 Aug 2007

5110-15-009-8705
Hand Reamer

150098705
570/10: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-14-213-5599
Hand File

142135599
E75001LF100C: RNCC: 2 | RNVC: 2
0914100301: RNCC: 3 | RNVC: 2
914-100D: RNCC: 3 | RNVC: 2
0914100304: RNCC: 3 | RNVC: 2
110-DX-100: RNCC: 3 | RNVC: 2

1 Jan 1964

5110-14-235-7204
Hand Cold Chisel

142357204
NO PRIMARY REF14-235-7204: RNCC: 3 | RNVC: 2
FTMAI54BURIN: RNCC: 5 | RNVC: 9

1 Jan 1967

5110-14-450-3004
Firmer Chisel

144503004
60125-20: RNCC: 3 | RNVC: 2

25 Sep 1991

5110-27-024-6524
Bolt Cutter

270246524
5110-TJ1-04838: RNCC: 2 | RNVC: 1

24 Nov 2004

5110-15-230-4108
Hand Reamer

152304108
616/1-094: RNCC: 3 | RNVC: 2
513315E074538: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-14-271-6041
Hand File

142716041
E75001LC350B: RNCC: 2 | RNVC: 2
0910350204: RNCC: 3 | RNVC: 2
109-MD-350: RNCC: 3 | RNVC: 2
DRD.MD350: RNCC: 3 | RNVC: 2
0910350201: RNCC: 3 | RNVC: 2
910-350DD: RNCC: 3 | RNVC: 2
3148516023100: RNCC: 5 | RNVC: 2
DRDMD350: RNCC: 5 | RNVC: 2
5013235: RNCC: 5 | RNVC: 2
0602310: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-14-274-7985
Woodcarving Gouge

142747985
E73-201G0UGEBISEAUEXTERIEUR8: RNCC: 2 | RNVC: 2
867-2LI0NS8: RNCC: 5 | RNVC: 2
867-2LI0NS8: RNCC: 5 | RNVC: 9
C311E08: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-074-6706
Hand Reamer

150746706
17UNI538ACCIAI0CARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6648
Hand Reamer

150746648
4UNI532ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-019-8398
Turning Chisel

270198398
10091KLXL0013: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-33-153-3608
Hand Hacksaw Frame

331533608
1375.012: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-27-000-8162
Bolt Cutter

270008162
2350 16 0018: RNCC: 3 | RNVC: 2

11 Jun 1991

5110-15-193-2027
Bolt Cutter

151932027
109 04: RNCC: 3 | RNVC: 2

20 Apr 2010

5110-33-103-9230
Hand File

331039230
360.631: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-274-8066
Hand File

142748066
2406-140-0: RNCC: 3 | RNVC: 2
506-00-140: RNCC: 3 | RNVC: 2
682-140-0: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-15-196-8793
Ratchet Drill

151968793
PN UAS 00041526: RNCC: 3 | RNVC: 2
2540F76034803: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-275-8965
Breast Drill

142758965
NO PRIMARY REF14-275-8965: RNCC: 3 | RNVC: 2
14LI0N: RNCC: 5 | RNVC: 2
7: RNCC: 5 | RNVC: 9
14: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-33-103-9159
Hand Rasp

331039159
351.352: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-271-5893
Hand Reamer

142715893
E74111-16RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-242-0069
Jeweler's Saw Frame

142420069
NO PRIMARY REF14-242-0069: RNCC: 3 | RNVC: 2
2072: RNCC: 5 | RNVC: 9

1 Jan 1967

5110-15-074-6645
Hand Reamer

150746645
2UNI532ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-102-7039
Scraper Blade

151027039
091620: RNCC: 3 | RNVC: 2

10 Aug 1987

5110-14-271-6045
Hand File

142716045
E75001LE300C: RNCC: 2 | RNVC: 2
0912300301: RNCC: 3 | RNVC: 2
912-300D: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-15-199-0941
Hand Reamer

151990941
7730-19: RNCC: 3 | RNVC: 2
F7730-19: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-437-7129
Hand Reamer

144377129
E74112-23-5RS: RNCC: 2 | RNVC: 2
F-P-23,5: RNCC: 3 | RNVC: 2
164-23,5: RNCC: 3 | RNVC: 2

14 Feb 1990

5110-14-274-7780
Smooth Plane

142747780
NO PRIMARY REF14-274-7780: RNCC: 3 | RNVC: 2
15-2732: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-074-6299
Hand Reamer

150746299
5UNI525ACCLEGUTENS: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-545-5043
Dimpling Die

145455043
DV-01505: RNCC: 3 | RNVC: 2

15 Apr 2005

5110-14-402-9077
Hand File Set

144029077
AS12LTP180T0: RNCC: 3 | RNVC: 2
3148516297204: RNCC: 5 | RNVC: 2

25 Jul 1985

5110-33-106-1222
Hand File

331061222
420005: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-14-271-6030
Hand File

142716030
E75001LF100B: RNCC: 2 | RNVC: 2
110-MD-100: RNCC: 3 | RNVC: 2
0914100201: RNCC: 3 | RNVC: 2
914-100DD: RNCC: 3 | RNVC: 2
0914100204: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-14-271-5959
Hand Reamer

142715959
E74111-16-5FS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-33-203-4055
Hand File

332034055
0910.00823: RNCC: 3 | RNVC: 2

1 Apr 2004

5110-14-440-7583
Scraper Blade

144407583
64-787-410: RNCC: 3 | RNVC: 2
7-10: RNCC: 5 | RNVC: 2
85-690-3324: RNCC: 6 | RNVC: 9

25 Jul 1990

5110-14-488-5321
Hand Reamer

144885321
F-P-5,2U6: RNCC: 3 | RNVC: 2
FP5-2U6: RNCC: 5 | RNVC: 2

15 May 1997

5110-33-204-3534
Pliers

332043534
PS-911650: RNCC: 3 | RNVC: 2

21 Jul 2005

5110-14-274-8302
Hand File

142748302
2402-180-4: RNCC: 3 | RNVC: 2
4475-180-4: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-14-271-5939
Hand Reamer

142715939
E74111-22FS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-452-5629
Hand File

144525629
2115-MID-300: RNCC: 3 | RNVC: 2

13 Jan 1992

5110-14-289-1431
Hand Hacksaw Frame

142891431
M0NTUREFIXE1-602: RNCC: 3 | RNVC: 2

1 Jan 1972

5110-15-199-0946
Hand Reamer

151990946
7730-14: RNCC: 3 | RNVC: 2
F7730-14: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-511-4251
Auger Handle

145114251
55-70-441-035-71: RNCC: 3 | RNVC: 2
72300611222: RNCC: 5 | RNVC: 9
QSZ636-4-230-14: RNCC: 5 | RNVC: 9
QSZ636-2-220V: RNCC: 5 | RNVC: 9
QSZ636-220V: RNCC: 5 | RNVC: 9

16 Dec 1998

5110-15-074-6160
Hand File

150746160
12-106MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-464-4964
Hand Reamer

144644964
854-600-030-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5110-14-271-5925
Hand Reamer

142715925
E74111-3FS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-512-0546
Hand File

145120546
CT.MD200: RNCC: 3 | RNVC: 2
CT-200: RNCC: 5 | RNVC: 9
CT200: RNCC: 5 | RNVC: 9

3 Feb 1999

5110-14-431-4162
Hand Reamer

144314162
E74112-47RS: RNCC: 2 | RNVC: 2
164-47: RNCC: 3 | RNVC: 2

18 Apr 1989

5110-14-296-0194
Wood Scraper

142960194
NO PRIMARY REF14-296-0194: RNCC: 3 | RNVC: 2
15-2463: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-14-249-9391
Hand Reamer

142499391
E66003A6-5HS: RNCC: 2 | RNVC: 2
3088-6-5: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-33-103-9092
Hand File

331039092
350.231: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-14-276-3215
Hand Reamer

142763215
E74112-18RS: RNCC: 2 | RNVC: 2
F-P-18: RNCC: 3 | RNVC: 2
164-18: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-14-467-5544
Hand Reamer

144675544
E66003A34RN: RNCC: 2 | RNVC: 2
EXP-QC-TD-34: RNCC: 3 | RNVC: 2

19 Jan 1994

5110-15-074-6726
Hand Reamer

150746726
23UNI538ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-429-3060
Hand Reamer

144293060
853-600-068-0: RNCC: 3 | RNVC: 2

11 Jan 1989

5110-15-074-6737
Hand Reamer

150746737
29UNI538ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-508-6658
Breast Drill

145086658
VILLE94744X00: RNCC: 3 | RNVC: 2

23 Sep 1998

5110-14-273-7484
Hand Reamer

142737484
E74103-26RS: RNCC: 2 | RNVC: 2
R603-26: RNCC: 3 | RNVC: 2
166-26: RNCC: 3 | RNVC: 2
1080-26: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-214-3815
Firmer Chisel

142143815
E73-201CISEAUDEMENUISIER10: RNCC: 2 | RNVC: 2
628-2LI0NS10: RNCC: 5 | RNVC: 2
628-10: RNCC: 5 | RNVC: 9

1 Jan 1965

5110-14-521-9447
Hand Wire Stripper

145219447
174.5: RNCC: 3 | RNVC: 2
0140320: RNCC: 5 | RNVC: 9

27 Sep 2000

5110-14-370-1173
Hand File Set

143701173
CLE.MDAM100: RNCC: 3 | RNVC: 2
130191: RNCC: 5 | RNVC: 2
3148516092502: RNCC: 5 | RNVC: 2
91750934: RNCC: 5 | RNVC: 2
0714 61 74: RNCC: 5 | RNVC: 2
0609250: RNCC: 5 | RNVC: 9
CLEMDAM: RNCC: 5 | RNVC: 9

18 May 1981

5110-15-196-9895
Hand File

151969895
PN UAS 00031596: RNCC: 3 | RNVC: 2
5110F76028506: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-394-4112
Hand File

143944112
E75001LN100B: RNCC: 2 | RNVC: 2
TPEF100: RNCC: 3 | RNVC: 2
3148516193001: RNCC: 5 | RNVC: 2

28 Aug 1984

5110-27-059-7445
Docking Hand Saw

270597445
BLITZ11: RNCC: 2 | RNVC: 1

22 Oct 2013

5110-15-074-7031
Turning Chisel

150747031
35ART102CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-27-057-5866
Docking Hand Saw

270575866
BLITZ5: RNCC: 2 | RNVC: 1
BLITZ5: RNCC: 2 | RNVC: 1

7 Sep 2012

5110-15-180-2701
Hand File

151802701
(241)A08731718D10/Q: RNCC: 3 | RNVC: 2
1718D10/Q: RNCC: 3 | RNVC: 2

7 Apr 2008

5110-15-074-5888
Hand File

150745888
B400UNI5492B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-053-5707
Corner Bit Brace

270535707
2.HIBM-T07/48-31: RNCC: 2 | RNVC: 1

23 May 2011

5110-14-439-0829
Miter Box And Saw

144390829
NO PRIMARY REF14-439-0829: RNCC: 3 | RNVC: 2
874A6: RNCC: 5 | RNVC: 2

25 Apr 1990

5110-15-074-6166
Hand File

150746166
14-106D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6156
Hand File

150746156
14-106BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-201-0481
Hand File

142010481
NO PRIMARY REF14-201-0481: RNCC: 3 | RNVC: 2
2302: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-383-8664
Hand Reamer

143838664
E74112-37-5RS: RNCC: 2 | RNVC: 2
F-P-37,5: RNCC: 3 | RNVC: 2
F-P-37-5: RNCC: 3 | RNVC: 2
164-37-5: RNCC: 3 | RNVC: 2

11 Apr 1983

5110-14-273-7488
Hand Reamer

142737488
E74103-32RS: RNCC: 2 | RNVC: 2
R603-32: RNCC: 3 | RNVC: 2
166-32: RNCC: 3 | RNVC: 2
1080-32: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-271-5885
Hand Reamer

142715885
E74111-6RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-431-4157
Hand Reamer

144314157
E74112-46RS: RNCC: 2 | RNVC: 2
164-46: RNCC: 3 | RNVC: 2

18 Apr 1989

5110-14-379-5089
Hand Wire Stripper

143795089
5010: RNCC: 3 | RNVC: 2
165-0: RNCC: 3 | RNVC: 2
H35: RNCC: 3 | RNVC: 2

1 Oct 1982

5110-15-074-6724
Hand Reamer

150746724
17UNI538ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-377-9457
Hand Hacksaw Blade

143779457
3806-12DENTS: RNCC: 3 | RNVC: 2

10 Jun 1982

5110-14-271-6066
Hand File

142716066
E75001LK100A: RNCC: 2 | RNVC: 2
113-BA-100: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-15-009-8714
Hand Reamer

150098714
570/3: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-15-074-6902
Hand Masonry Drill

150746902
200-10ART734: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-378-2687
Hand Reamer

143782687
E66-003-7HELICOIDALRS: RNCC: 2 | RNVC: 2
169-7: RNCC: 3 | RNVC: 2

20 Jul 1982

5110-14-530-2983
Hand Rasp

145302983
RAB.DRDB300: RNCC: 3 | RNVC: 2
3148516255709: RNCC: 5 | RNVC: 2

29 May 2002

5110-33-156-5755
Bow Saw

331565755
649.100: RNCC: 3 | RNVC: 2

29 Aug 1996

5110-15-054-2300
Broad Hatchet

150542300
56-6-230: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-271-6032
Hand File

142716032
E75001LF250B: RNCC: 2 | RNVC: 2
0914250201: RNCC: 3 | RNVC: 2
914-250DD: RNCC: 3 | RNVC: 2
0914250204: RNCC: 3 | RNVC: 2
110-MD-250: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-33-107-6625
Hand File

331076625
4002-250-ENTREFINA: RNCC: 3 | RNVC: 2
DIN 7261/B250-2: RNCC: 4 | RNVC: 1
5110000021: RNCC: 5 | RNVC: 2

17 Apr 2000

5110-14-395-8914
Scraper Blade

143958914
GM20MM: RNCC: 3 | RNVC: 2

30 Oct 1984

5110-15-074-6885
Hand Cold Chisel

150746885
150-10FIG26: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-271-5917
Hand Reamer

142715917
E74111-15RS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-15-125-7432
Pipe Cutter

151257432
622A: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-529-7314
Paper Cutter

145297314
NO PRIMARY REF14-529-7314: RNCC: 3 | RNVC: 2
SYQ1313: RNCC: 5 | RNVC: 2
05000: RNCC: 5 | RNVC: 2

9 Apr 2002

5110-14-411-5068
Hand Reamer

144115068
E66011-12JUIL1976HSS: RNCC: 2 | RNVC: 2
176-01-12: RNCC: 3 | RNVC: 2

6 Aug 1986

5110-14-464-4957
Hand Reamer

144644957
854-600-023-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5110-14-544-5125
Hand Wire Stripper

145445125
NO PRIMARY REF 14-544-5125: RNCC: 3 | RNVC: 2
20090: RNCC: 3 | RNVC: 9
251-7279: RNCC: 5 | RNVC: 2
AA002335: RNCC: 6 | RNVC: 9

8 Feb 2005

5110-14-249-7998
Hand File

142497998
E75001LF300B: RNCC: 2 | RNVC: 2
0914300201: RNCC: 3 | RNVC: 2
914-300DD: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-33-005-4417
Hand File

330054417
904.00630: RNCC: 3 | RNVC: 2
350.533: RNCC: 3 | RNVC: 2

25 Jul 2001

5110-14-276-3222
Hand Reamer

142763222
E74112-36RS: RNCC: 2 | RNVC: 2
F-P-36: RNCC: 3 | RNVC: 2
164-36: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-14-276-3219
Hand Reamer

142763219
E74112-27RS: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-33-103-9165
Hand Rasp

331039165
351.451: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-274-8087
Hand File

142748087
9811800: RNCC: 3 | RNVC: 2
515-00-180: RNCC: 3 | RNVC: 2
2415-180-0: RNCC: 5 | RNVC: 2
683-180-0: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-33-103-9102
Hand File

331039102
350.272: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-33-204-3895
Single Bit Ax

332043895
8130-600: RNCC: 3 | RNVC: 2
156522: RNCC: 5 | RNVC: 2

1 Sep 2005

5110-14-274-8059
Hand File

142748059
2401-140-0: RNCC: 3 | RNVC: 2
680-140-0: RNCC: 5 | RNVC: 2
PB140: RNCC: 5 | RNVC: 2
SYB0288: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-15-074-6629
Hand Reamer

150746629
20UNI532ACCIAI0CARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6711
Hand Reamer

150746711
32UNI538ACCIAI0CARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6637
Hand Reamer

150746637
6UNI532ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-103-9208
Hand File

331039208
360.132: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-344-1264
Hand Reamer

143441264
330A97-2404-54: RNCC: 3 | RNVC: 2

13 Jul 1977

5110-14-274-8070
Hand File

142748070
2410-140-2: RNCC: 3 | RNVC: 2
687-140-2: RNCC: 5 | RNVC: 2
RM140: RNCC: 5 | RNVC: 2
SYQ0915: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-15-055-3584
Turning Chisel

150553584
6062-25: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-196-6772
Broad Hatchet

151966772
PN UAS 00034261: RNCC: 3 | RNVC: 2
5110F76030075: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-464-4891
Dimpling Die

144644891
851-910-028-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5110-27-018-8535
Corner Bit Brace

270188535
901-DS-41: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-074-6531
Hand Reamer

150746531
28UNI525TAGLIENTIELICACCSUPERRA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-6946
Firmer Chisel

150746946
25ART108: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-7412
Hand Hacksaw Blade

150747412
13-24UNI4000ACCIAI0LAV0RAZI0NIA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-33-106-1214
Hand File

331061214
405804: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-33-103-9252
Hand Rasp

331039252
361.461: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-33-103-9417
Hand Cable Stripper

331039417
790.125: RNCC: 3 | RNVC: 2

23 Jun 1995

5110-15-074-5808
Hand File

150745808
D450UNI5488B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-214-9875
End Cutting Nippers

152149875
1807/6-200: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-074-6084
Hand File

150746084
10INART102MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6730
Hand Reamer

150746730
8-5UNI538ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6113
Hand File

150746113
8INART103ME220D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-522-1522
Hand Reamer

145221522
33503102: RNCC: 3 | RNVC: 2

4 Oct 2000

5110-14-471-9905
Hand File

144719905
RD.B300: RNCC: 3 | RNVC: 2
RDB300: RNCC: 5 | RNVC: 2
3148516038807: RNCC: 5 | RNVC: 2
0603880: RNCC: 5 | RNVC: 2
0714 61 48: RNCC: 5 | RNVC: 2
RD.B 300: RNCC: 5 | RNVC: 2

28 Sep 1994

5110-33-156-5965
Craftsman's Knife

331565965
652.200: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-074-6954
Firmer Chisel

150746954
15ART109: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-103-9169
Hand Rasp

331039169
351.462: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-117-4779
Hand Cable Stripper

151174779
499999043: RNCC: 3 | RNVC: 2
47836: RNCC: 3 | RNVC: 2

27 Oct 1993

5110-14-364-4894
Riffler

143644894
8812036004: RNCC: 3 | RNVC: 2

2 Sep 1980

5110-14-271-7259
Firmer Chisel

142717259
131-18: RNCC: 3 | RNVC: 2
C011E18: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-15-179-4955
Firmer Chisel

151794955
0-16-882: RNCC: 3 | RNVC: 2
00.07.34.55: RNCC: 5 | RNVC: 2

22 Jan 2007

5110-15-074-6039
Hand File

150746039
1D350UNI5500: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-009-8738
Hand File

150098738
2562/2/10: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-14-274-7990
Firmer Gouge

142747990
12-3-40EMMANCHE: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-15-134-4054
Bolt Cutter

151344054
1880-2: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-074-6088
Hand File

150746088
8INART102D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6092
Hand File

150746092
16INART102D0LCEB: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6044
Hand File

150746044
B200UNI5501B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-103-9135
Hand File

331039135
350.672: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-15-121-4582
Paper Cutter

151214582
TW4.0000.100.97: RNCC: 3 | RNVC: 2
TW4.0000.100.97: RNCC: 5 | RNVC: 9

31 May 1996

5110-15-236-4101
Bolt Cutter

152364101
U01308: RNCC: 3 | RNVC: 2
511015E026314: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-27-000-8007
Hand Cold Chisel

270008007
5500 40 0100: RNCC: 3 | RNVC: 2

23 Oct 1990

5110-33-154-9154
Tube Cutter

331549154
32150: RNCC: 3 | RNVC: 2
41 83021 32: RNCC: 3 | RNVC: 2

24 Jan 1991

5110-15-050-7719
Hand Rasp

150507719
1-2D250UNI5522-64: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-33-003-6135
Hand File

330036135
400908: RNCC: 3 | RNVC: 2

25 May 1998

5110-15-074-7011
Turning Chisel

150747011
10ART102: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6056
Hand File

150746056
200UNI5505: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-201-5394
Hand File

142015394
E75001LF200C: RNCC: 2 | RNVC: 2
RD.D200: RNCC: 3 | RNVC: 2
0914200301: RNCC: 3 | RNVC: 2
914-200D: RNCC: 3 | RNVC: 2
130041: RNCC: 5 | RNVC: 2
3148516043009: RNCC: 5 | RNVC: 2
RDD200: RNCC: 5 | RNVC: 2
0714 61 54: RNCC: 5 | RNVC: 2
0604300: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-33-209-2582
Keyhole Saw

332092582
4572-12: RNCC: 3 | RNVC: 2
8414299303100: RNCC: 5 | RNVC: 2

16 Sep 2011

5110-14-449-0820
Hand File

144490820
110-MD-350: RNCC: 3 | RNVC: 2

24 Jul 1991

5110-14-530-9997
Paper Cutter

145309997
744M101: RNCC: 3 | RNVC: 2
744M101: RNCC: 5 | RNVC: 2

22 Jul 2002

5110-14-359-0278
Hand Wire Stripper

143590278
45-170: RNCC: 3 | RNVC: 2
H35-7: RNCC: 5 | RNVC: 2

7 Sep 1979

5110-15-216-9628
Hand Drill

152169628
0720: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-271-6053
Hand File

142716053
E75001LG300C: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-074-6685
Hand Reamer

150746685
37-65UNI535ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-055-3583
Turning Chisel

150553583
6062-18: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-055-3592
Hand Cold Chisel

150553592
59-3-770: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-074-6375
Hand Reamer

150746375
5UNI525ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-202-6598
Craftsman's Knife

152026598
030165: RNCC: 3 | RNVC: 2

12 Jun 2007

5110-14-280-1824
Hand File

142801824
E75001LK350A: RNCC: 4 | RNVC: 1

1 Jan 1971

5110-15-074-6668
Hand Reamer

150746668
20UNI532ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-103-9209
Hand File

331039209
360.151: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-074-6938
Firmer Chisel

150746938
12ART108: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-221-2660
Hand Cold Chisel

152212660
SCALPELLO: RNCC: 3 | RNVC: 2
(241)A1572SCALPELLO: RNCC: 5 | RNVC: 2

16 Nov 2005

5110-15-074-6581
Hand Reamer

150746581
2UNI524ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5836
Hand File

150745836
B200UNI5494: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6269
Hand Reamer

150746269
13UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-273-7567
Hand Reamer

142737567
E74108-8RS: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-15-074-5851
Hand File

150745851
D150UNI5494B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-528-8124
Hand Hacksaw Blade

145288124
666A.10: RNCC: 3 | RNVC: 2
0192019: RNCC: 5 | RNVC: 2
SYQ0816: RNCC: 5 | RNVC: 2

18 Feb 2002

5110-14-433-0210
Hardy

144330210
21-50: RNCC: 3 | RNVC: 2
91616435: RNCC: 5 | RNVC: 2

5 Jul 1989

5110-33-156-5744
Bow Saw

331565744
1377.012: RNCC: 3 | RNVC: 2
80106: RNCC: 3 | RNVC: 2
394.012: RNCC: 3 | RNVC: 2

29 Aug 1996

5110-15-152-3232
Pocket Knife

151523232
COLTELLO INOX GALLEGGIANTE: RNCC: 3 | RNVC: 2

6 Oct 2000

5110-14-375-3012
Hand Cold Chisel

143753012
B61473T: RNCC: 3 | RNVC: 2

26 Feb 1982

5110-14-541-0211
Firmer Chisel

145410211
7011150201: RNCC: 3 | RNVC: 2
3303807011116: RNCC: 5 | RNVC: 2

5 May 2004

5110-14-490-0610
Tailor's Shears

144900610
841.8A: RNCC: 3 | RNVC: 2
0206955: RNCC: 5 | RNVC: 2

10 Sep 1997

5110-15-154-6169
Hand File Set

151546169
G431050: RNCC: 3 | RNVC: 2

27 Jul 2001

5110-15-074-5827
Hand File

150745827
D150UNI5493B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-530-2002
Hand File

145302002
DRD.D250: RNCC: 3 | RNVC: 2

22 May 2002

5110-14-468-9401
Paper Cutter

144689401
1358M13: RNCC: 3 | RNVC: 2

30 Mar 1994

5110-15-199-0667
Hand Reamer

151990667
7730-4.5: RNCC: 3 | RNVC: 2
F7730-4.5: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-201-7243
Hand Reamer

142017243
E74104-80RN: RNCC: 2 | RNVC: 2
3088-8: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-14-477-8234
Hand Wire Stripper

144778234
974-016927-90: RNCC: 3 | RNVC: 2
162-4540: RNCC: 5 | RNVC: 2

27 Sep 1995

5110-33-203-4682
Hand Cold Chisel

332034682
8730.02000: RNCC: 3 | RNVC: 2

16 Apr 2004

5110-14-539-2195
Single Bit Ax

145392195
50108066: RNCC: 3 | RNVC: 2

12 Dec 2003

5110-15-074-6691
Hand Reamer

150746691
23-45UNI535ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-235-4108
Hand Reamer

142354108
E66012A4-5RS: RNCC: 2 | RNVC: 2

1 Jan 1967

5110-14-244-0648
Hand Reamer

142440648
E74111-2FS: RNCC: 2 | RNVC: 2
20020-2: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-14-285-4782
Hand File

142854782
E75001LU300A: RNCC: 2 | RNVC: 2

1 Jan 1972

5110-15-196-9894
Hand File

151969894
PN UAS 00025765: RNCC: 3 | RNVC: 2
5110F76011916: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-074-6211
Hand Rasp

150746211
1-2D250UNI5523MEZZ0T0NDA: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-270-3939
Hand Reamer

142703939
E66011A16RN: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-521-6489
Hand Reamer

145216489
250-5-5H8: RNCC: 3 | RNVC: 2

30 Aug 2000

5110-15-074-5844
Hand File

150745844
1-2D200UNI5494B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6596
Hand Reamer

150746596
2-5UNI531ACCIAI0CARB0NI0SPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6217
Hand Rasp

150746217
B300UNI5521: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-015-8891
Turning Chisel

270158891
99999-NIIN-DA0030042: RNCC: 2 | RNVC: 1

17 Dec 2002

5110-14-528-0700
Hand Cape Chisel

145280700
888-514-600-1: RNCC: 3 | RNVC: 2

12 Dec 2001

5110-14-432-9956
Hand File

144329956
AIG.DRD140T2: RNCC: 3 | RNVC: 2
3148516313904: RNCC: 5 | RNVC: 2
AIGDRD140T2: RNCC: 5 | RNVC: 2
91625246: RNCC: 5 | RNVC: 2
0631390: RNCC: 5 | RNVC: 9

5 Jul 1989

5110-15-074-6008
Hand File

150746008
75UNI5515: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-244-0913
Hand Reamer

142440913
NF E 66-003/34,5: RNCC: 2 | RNVC: 2
8040101-34,5: RNCC: 3 | RNVC: 2
E66003-34,5: RNCC: 5 | RNVC: 2
E74104-34-5FS: RNCC: 5 | RNVC: 2
TKF8040101-34,5: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-14-417-8471
Bolt Cutter

144178471
158N-3: RNCC: 3 | RNVC: 2
158N3: RNCC: 3 | RNVC: 2
3272670267763: RNCC: 5 | RNVC: 2

29 Jul 1987

5110-14-298-7831
Rip Hand Saw

142987831
NO PRIMARY REF14-298-7831: RNCC: 3 | RNVC: 2
314LI0N40: RNCC: 5 | RNVC: 2
C314-40: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-15-074-5928
Hand File

150745928
D100UNI5498: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-450-3005
Firmer Chisel

144503005
60125-25: RNCC: 3 | RNVC: 2

25 Sep 1991

5110-14-218-4256
Hand File

142184256
E75001LC200A: RNCC: 2 | RNVC: 2
0910200101: RNCC: 3 | RNVC: 2
910-200B: RNCC: 3 | RNVC: 2
DRD.B200EM: RNCC: 3 | RNVC: 2
DRDB200EM: RNCC: 5 | RNVC: 2
3148516509109: RNCC: 5 | RNVC: 2
130330: RNCC: 5 | RNVC: 2
0650910: RNCC: 5 | RNVC: 9

1 Jan 1965

5110-14-512-0545
Hand File

145120545
NO PRIMARY REF14-512-0545: RNCC: 3 | RNVC: 2
CAR-200: RNCC: 5 | RNVC: 9
CAR200: RNCC: 5 | RNVC: 9

3 Feb 1999

5110-33-103-9074
Hand File

331039074
900.00610: RNCC: 3 | RNVC: 2
350.131: RNCC: 3 | RNVC: 2

22 Jun 1995

5110-33-202-1161
Pocket Knife

332021161
185.1750: RNCC: 3 | RNVC: 2
53-9: RNCC: 3 | RNVC: 2
185.1750: RNCC: 5 | RNVC: 2

16 Jan 2003

5110-15-050-9069
Hand File

150509069
D200UNI5493B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-195-3901
Poising Saw

151953901
539P: RNCC: 3 | RNVC: 2
(241)A5964539P: RNCC: 5 | RNVC: 2

21 Mar 2011

5110-15-151-5891
Hand Reamer

151515891
99390330: RNCC: 3 | RNVC: 2

9 Jun 2000

5110-33-103-9215
Hand File

331039215
360.231: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-074-6055
Hand File

150746055
300UNI5504: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-539-2326
Circle Cutter

145392326
694CN: RNCC: 3 | RNVC: 2

15 Dec 2003

5110-33-103-9226
Hand File

331039226
360.461: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-196-0646
Framing Chisel

151960646
PN UAS 00016733: RNCC: 3 | RNVC: 2
5110F76025103: RNCC: 5 | RNVC: 9

31 Mar 2004

5110-27-019-2235
Pipe Cutter

270192235
10330YM0214: RNCC: 2 | RNVC: 1
06760 24 042: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-074-6673
Hand Reamer

150746673
10-25UNI535ACCIAI0CARB0NI0SPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-278-9903
Bootmaker Knife

142789903
NO PRIMARY REF14-278-9903: RNCC: 3 | RNVC: 2
A720-270: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-195-0094
Bow Saw

151950094
42007: RNCC: 3 | RNVC: 2
(241)A415542007: RNCC: 5 | RNVC: 2

16 Feb 2011

5110-14-210-5457
Hand File

142105457
E75001LB300: RNCC: 2 | RNVC: 1
120RUDE300: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-14-437-5759
Hand File

144375759
NO PRIMARY REF14-437-5759: RNCC: 3 | RNVC: 2
AIGDRD180T0: RNCC: 5 | RNVC: 2
91592364: RNCC: 5 | RNVC: 2

7 Feb 1990

5110-15-196-9892
Hand File

151969892
PN UAS 00025762: RNCC: 3 | RNVC: 2
5110F76011913: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-376-6309
Hand Wire Stripper

143766309
NO PRIMARY REF14-376-6309: RNCC: 3 | RNVC: 2
2832-4: RNCC: 5 | RNVC: 9

28 Apr 1982

5110-15-217-9059
Bolt Cutter

152179059
990.R1: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-074-5931
Hand File

150745931
D250UNI5498: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-271-6144
Hand File

142716144
E75001LA350C: RNCC: 2 | RNVC: 2
900-350D: RNCC: 3 | RNVC: 2
0900350304: RNCC: 3 | RNVC: 2
101-DX-350: RNCC: 3 | RNVC: 2
101D0UCE350: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-14-271-6072
Hand File

142716072
E75001LK250A: RNCC: 2 | RNVC: 2
0923250101: RNCC: 3 | RNVC: 2
923-250B: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-33-103-9197
Hand File

331039197
360.011: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-074-9031
Hand Reamer

150749031
34UNI525ACCSUPER: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6613
Hand Reamer

150746613
0-8UNI531ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-236-9644
Bolt Cutter

152369644
2570: RNCC: 3 | RNVC: 2
511015E034558: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-050-5914
End Cutting Nippers

150505914
185NT150MM: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-054-4824
Bow Saw

150544824
5570-8: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-074-6679
Hand Reamer

150746679
4-10UNI535ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6206
Hand Rasp

150746206
B300UNI5523: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-3297
Hand File

150743297
D250UNI5488: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-3285
Hand File

150743285
B450UNI5488B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6218
Hand Rasp

150746218
B350UNI5521: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-3295
Hand File

150743295
D150UNI5488: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5835
Hand File

150745835
B150UNI5494B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-379-1231
Hand Reamer

143791231
14231-42416: RNCC: 3 | RNVC: 2

6 Sep 1982

5110-15-074-5986
Hand File

150745986
2-150UNI5511: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-12-384-2794
Enclosed Blade Tube Deburring Tool

123842794
113815: RNCC: 3 | RNVC: 2

9 Feb 2011

5110-15-155-6083
Hand Bench Shears

151556083
(241)A5682CE.LAT.: RNCC: 3 | RNVC: 2
CE.LAT.: RNCC: 3 | RNVC: 2

30 Apr 2002

5110-14-201-2204
Hand Hacksaw Blade

142012204
E73-071-250-13-0-65: RNCC: 2 | RNVC: 2

1 Jan 1962

5110-14-275-8962
Rip Hand Saw

142758962
1-15-237: RNCC: 3 | RNVC: 2
4566-45: RNCC: 3 | RNVC: 9
1-15-228-3: RNCC: 5 | RNVC: 2
SYQ0861: RNCC: 5 | RNVC: 2
496-45: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-271-5910
Hand Reamer

142715910
E74111-9-5RS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-15-050-9108
Hand File

150509108
1-2D225UNI5489: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-074-6038
Hand File

150746038
1D300UNI5500: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6907
Firmer Chisel

150746907
6ART106: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-27-018-8395
Corner Bit Brace

270188395
0713931-1: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-000-2790
Hand File

150002790
S2300GE: RNCC: 3 | RNVC: 2

14 Feb 2013

5110-15-054-4826
Blacksmith's Chisel

150544826
1-25UC100UNT4133C0NMANIC0: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-280-1817
Hand File

142801817
E75001LH250C: RNCC: 4 | RNVC: 1

1 Jan 1971

5110-33-103-9122
Hand File

331039122
350.611: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-33-205-4491
Hand File

332054491
4006-10 BAS.: RNCC: 3 | RNVC: 2
8414299424508: RNCC: 5 | RNVC: 2

9 Oct 2006

5110-14-201-6877
File Holder

142016877
851B: RNCC: 3 | RNVC: 2
1707-350MM: RNCC: 3 | RNVC: 2
3148512080053: RNCC: 5 | RNVC: 2
MRE: RNCC: 5 | RNVC: 9
0208005: RNCC: 5 | RNVC: 9
851: RNCC: 5 | RNVC: 9
851-A: RNCC: 5 | RNVC: 9
851A: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-15-074-6134
Hand File

150746134
10-104D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-7058
Firmer Gouge

150747058
18ART113: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6267
Hand Reamer

150746267
11UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-7066
Firmer Gouge

150747066
35ART113: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-407-8834
Wood Scraper

144078834
NO PRIMARY REF14-407-8834: RNCC: 3 | RNVC: 2
996: RNCC: 5 | RNVC: 9

5 Mar 1986

5110-15-074-6448
Hand Reamer

150746448
20UNI525TAGLIENTIELICACCLEGUTEN-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-6171
Hand File

150746171
14-107BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-281-1972
Back Saw

142811972
C270-30: RNCC: 3 | RNVC: 9
270-30: RNCC: 5 | RNVC: 2
2610-30: RNCC: 5 | RNVC: 9
504-30: RNCC: 5 | RNVC: 9
B500A30: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-003-8283
Hand Post Drill

150038283
T071: RNCC: 3 | RNVC: 2
(241)AK647T071: RNCC: 5 | RNVC: 2

28 Nov 2013

5110-14-411-8436
Hand File

144118436
166868: RNCC: 3 | RNVC: 2

10 Sep 1986

5110-15-074-6242
Hand Rasp

150746242
1-2D250UNI5525T0NDA: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-003-6142
File Handle

330036142
4089-2: RNCC: 3 | RNVC: 2

25 May 1998

5110-15-074-6898
Hand Cold Chisel

150746898
200-10ART42416: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-196-6920
Hand Hacksaw Frame

151966920
PN UAS 00028229: RNCC: 3 | RNVC: 2
5210F76010819: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-264-0739
Hand Cold Chisel

142640739
263.15: RNCC: 3 | RNVC: 2
263-15: RNCC: 5 | RNVC: 2
3148511615003: RNCC: 5 | RNVC: 2
0714 63 01: RNCC: 5 | RNVC: 2
0161500: RNCC: 5 | RNVC: 9
253-16: RNCC: 5 | RNVC: 9
3645-150: RNCC: 5 | RNVC: 9
3442301: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-15-074-5905
Hand File

150745905
B100UNI5495B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-427-6440
Hand Reamer

144276440
408RDIA10: RNCC: 3 | RNVC: 2
99051609: RNCC: 5 | RNVC: 2

27 Oct 1988

5110-15-197-1693
Nested Saws

151971693
PN UAS 00025779: RNCC: 3 | RNVC: 2
5110F76012986: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-33-103-9260
Hand File

331039260
362.812: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-33-155-9809
Pocket Knife

331559809
850.380/1: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-33-155-1124
Hand File

331551124
LIMA PLANA S/FINA 14": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-15-050-6138
Hand Rasp

150506138
D300UNI5522: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-469-0393
Paper Cutter

144690393
NO PRIMARY REF14-469-0393: RNCC: 3 | RNVC: 2
0113001: RNCC: 5 | RNVC: 9

5 Apr 1994

5110-15-074-6857
Hand Cold Chisel

150746857
150-18ART32650CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-27-029-5888
Docking Hand Saw

270295888
05895 20 150: RNCC: 2 | RNVC: 1

17 Apr 2006

5110-33-158-6353
Bow Saw

331586353
1361.012: RNCC: 3 | RNVC: 2

29 Aug 1996

5110-14-369-6954
Hand Hacksaw Blade

143696954
T8: RNCC: 3 | RNVC: 9

17 Apr 1981

5110-14-488-4676
Hand Reamer

144884676
E74112-4-4RS: RNCC: 2 | RNVC: 2
164-4,4: RNCC: 3 | RNVC: 2
F-P-4,4: RNCC: 3 | RNVC: 2
164-4-4: RNCC: 5 | RNVC: 2
FP4-4: RNCC: 5 | RNVC: 2

14 May 1997

5110-27-008-4620
Adz

270084620
0645103600: RNCC: 2 | RNVC: 1

13 Oct 2000

5110-33-161-6845
Bow Saw

331616845
32.21: RNCC: 2 | RNVC: 2

24 Jul 1995

5110-14-242-9457
Hand Wire Stripper

142429457
175: RNCC: 3 | RNVC: 2
4482: RNCC: 3 | RNVC: 9

1 Jan 1967

5110-15-052-7098
Hand File

150527098
100VN15674: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-540-8532
Firmer Chisel

145408532
7011140201: RNCC: 3 | RNVC: 2
3303807011093: RNCC: 5 | RNVC: 2

23 Apr 2004

5110-15-074-3261
Hand File

150743261
B450UNI5487B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-006-0444
Firmer Chisel Set

150060444
794850 11: RNCC: 3 | RNVC: 2
(241)A0019794850 11: RNCC: 5 | RNVC: 2

12 Dec 2013

5110-15-074-5857
Hand File

150745857
B100UNI5489: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-371-9159
Hand Reamer

143719159
E66017 CM4 QUEUE CYLINDRIQUE: RNCC: 2 | RNVC: 2
20400-4: RNCC: 3 | RNVC: 2

5 Aug 1981

5110-33-103-9239
Hand Rasp

331039239
361.231: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-274-8382
File Holder

142748382
939: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-15-074-6642
Hand Reamer

150746642
20UNI532ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-103-9187
Hand File

331039187
352.852: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-541-6875
Hand Post Drill

145416875
20501011: RNCC: 3 | RNVC: 2

17 Jun 2004

5110-15-114-9214
Hand File Set

151149214
9815058: RNCC: 3 | RNVC: 2
9815058: RNCC: 3 | RNVC: 2

11 Sep 1992

5110-15-107-2964
Hand File

151072964
62321-30/202: RNCC: 3 | RNVC: 2

10 May 1988

5110-14-270-3936
Hand Reamer

142703936
E66011A11RN: RNCC: 2 | RNVC: 1
30-05-11: RNCC: 5 | RNVC: 9
1140-11: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-14-291-2031
Hand Drill

142912031
NO PRIMARY REF14-291-2031: RNCC: 3 | RNVC: 2
5: RNCC: 5 | RNVC: 2
5: RNCC: 5 | RNVC: 9
11: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-14-274-8077
Hand File

142748077
2415-140-2: RNCC: 3 | RNVC: 2
683-140-2: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-15-180-2692
Hand File

151802692
(241)A08731718A4/T: RNCC: 3 | RNVC: 2
1718A4/T: RNCC: 3 | RNVC: 2

7 Apr 2008

5110-27-018-8135
Corner Bit Brace

270188135
901-TS-263: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-408-5729
File Handle

144085729
NO PRIMARY REF14-408-5729: RNCC: 3 | RNVC: 2
1022461: RNCC: 5 | RNVC: 9

2 Apr 1986

5110-14-271-6073
Hand File

142716073
E75001LK250B: RNCC: 2 | RNVC: 2
0923250201: RNCC: 3 | RNVC: 2
923-250DD: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-14-424-9744
Hand File Set

144249744
1429: RNCC: 3 | RNVC: 2
1429: RNCC: 5 | RNVC: 2
85-693-6327: RNCC: 6 | RNVC: 9

16 Jun 1988

5110-14-271-5915
Hand Reamer

142715915
E74111-13-5RS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-15-054-2626
Dovetail Saw

150542626
4724-250: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-33-004-9425
Hand File

330049425
51110-200/8": RNCC: 3 | RNVC: 2
4005-8-200: RNCC: 3 | RNVC: 2

14 Mar 2000

5110-14-274-8295
Hand File

142748295
4476BIS140-4: RNCC: 3 | RNVC: 2
508-2-140: RNCC: 3 | RNVC: 2
2408-140-4: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-14-270-3933
Hand Reamer

142703933
E66011A8RN: RNCC: 2 | RNVC: 2
8040061-8: RNCC: 3 | RNVC: 2
703CO8: RNCC: 3 | RNVC: 2
1AH16024: RNCC: 3 | RNVC: 2
D7601.080: RNCC: 3 | RNVC: 2
SYQ1957: RNCC: 5 | RNVC: 2
30-05-8: RNCC: 5 | RNVC: 9
1140-8: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-14-441-9849
Hand Cold Chisel

144419849
851-930-625-0: RNCC: 3 | RNVC: 2

26 Sep 1990

5110-14-371-0452
Hand Reamer

143710452
E74112-24-5RS: RNCC: 2 | RNVC: 2
F-P-24-5: RNCC: 3 | RNVC: 2
164-24-5: RNCC: 3 | RNVC: 2

5 Jun 1981

5110-27-056-3105
Corner Bit Brace

270563105
2.HIBM-T07/56-09: RNCC: 2 | RNVC: 1

14 Mar 2012

5110-15-205-5229
Hand File Set

152055229
517420 200: RNCC: 3 | RNVC: 2
(241)AK761517420200: RNCC: 5 | RNVC: 2

16 Mar 2012

5110-27-057-7029
Hand Drill

270577029
8391D: RNCC: 2 | RNVC: 1

27 Sep 2012

5110-33-155-1125
Hand File

331551125
LIMA PLANA S/FINA 10": RNCC: 3 | RNVC: 2
406405: RNCC: 5 | RNVC: 2

29 Jun 1996

5110-14-439-7988
Hand File

144397988
RD.MD250: RNCC: 3 | RNVC: 2
3148516040909: RNCC: 5 | RNVC: 2
RDMD250: RNCC: 5 | RNVC: 2
91355336: RNCC: 5 | RNVC: 2
91455369: RNCC: 5 | RNVC: 2
0714 61 51: RNCC: 5 | RNVC: 2
0604090: RNCC: 5 | RNVC: 9

23 May 1990

5110-14-539-5334
Hand File

145395334
CAR.D200: RNCC: 3 | RNVC: 2
3148516034007: RNCC: 5 | RNVC: 2

22 Jan 2004

5110-14-378-2686
Hand Reamer

143782686
E66-003-6HELICOIDALRS: RNCC: 2 | RNVC: 2
169-6: RNCC: 3 | RNVC: 2

20 Jul 1982

5110-14-271-6147
Hand File

142716147
E75001LB150B: RNCC: 2 | RNVC: 2
0906150204: RNCC: 3 | RNVC: 2
102-MID-150: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-14-271-6074
Hand File

142716074
E75001LK250C: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-009-8735
Hand File

150098735
2560/1/10: RNCC: 3 | RNVC: 2

1 Mar 1981

5110-14-522-1524
Hand Reamer

145221524
33503211: RNCC: 3 | RNVC: 2

4 Oct 2000

5110-15-074-6580
Hand Reamer

150746580
1-5UNI524ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-102-7435
Hand File

151027435
2637 PP: RNCC: 3 | RNVC: 2
(241)A03022637PP: RNCC: 5 | RNVC: 2

15 May 1987

5110-15-068-3926
Hand Reamer

150683926
12000-13: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-14-553-5714
Hand Cape Chisel

145535714
265.G18: RNCC: 3 | RNVC: 2
3148511617502: RNCC: 5 | RNVC: 2

18 Apr 2007

5110-14-505-1911
Hand Wire Stripper

145051911
175.A2: RNCC: 3 | RNVC: 2
175.A2: RNCC: 5 | RNVC: 2
3148511404102: RNCC: 5 | RNVC: 2

11 Mar 1998

5110-15-188-5304
Ladies' Scissors

151885304
MK048: RNCC: 3 | RNVC: 2
(241)AF120MK048: RNCC: 5 | RNVC: 2

5 Oct 2009

5110-14-420-9541
Hand File

144209541
RD.MD100: RNCC: 3 | RNVC: 2
RDMD100: RNCC: 5 | RNVC: 2
3148516039705: RNCC: 5 | RNVC: 2
91355333: RNCC: 5 | RNVC: 2
91455372: RNCC: 5 | RNVC: 2
0603970: RNCC: 5 | RNVC: 9

6 Jan 1988

5110-14-202-2880
Gimlet

142022880
390-6: RNCC: 3 | RNVC: 2
1908-6: RNCC: 3 | RNVC: 9
2-6: RNCC: 5 | RNVC: 9
4617-6: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-14-477-8236
Hand Wire Stripper

144778236
974-022784-90: RNCC: 3 | RNVC: 2

27 Sep 1995

5110-14-541-6840
Brick Chisel

145416840
559: RNCC: 3 | RNVC: 2
010801LG225MMCISEAUXBE-CU: RNCC: 5 | RNVC: 9

17 Jun 2004

5110-14-338-3102
Woodcarving Gouge

143383102
E73-201G0UGEBISEAUINTERIEUR25: RNCC: 2 | RNVC: 2

6 Nov 1976

5110-15-052-7099
Hand File

150527099
100UNI5675: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-378-2684
Hand Reamer

143782684
E66-003-7-5HELIC0IDALRS: RNCC: 2 | RNVC: 2
169-7,5: RNCC: 3 | RNVC: 2

20 Jul 1982

5110-15-214-9857
Hand Graver

152149857
3615/2-12: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-465-7519
Hand Reamer

144657519
851-600-762-0: RNCC: 3 | RNVC: 2

14 Oct 1993

5110-14-401-7485
Hand File Set

144017485
NO PRIMARY REF14-401-7485: RNCC: 3 | RNVC: 2
4793-160: RNCC: 5 | RNVC: 9

13 Jun 1985

5110-14-201-0489
Hand File

142010489
NO PRIMARY REF14-201-0489: RNCC: 3 | RNVC: 2
2317: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-264-8261
Hardy

142648261
651-60: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-14-270-3989
Hand Reamer

142703989
E74104-33RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-468-9402
Paper Cutter

144689402
1358M12: RNCC: 3 | RNVC: 2

30 Mar 1994

5110-14-464-4954
Hand Reamer

144644954
854-600-020-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5110-33-211-4763
Knife Blade

332114763
SPB-0030: RNCC: 3 | RNVC: 2

16 Nov 2013

5110-14-274-8535
Hand Rasp

142748535
E75001RA250C: RNCC: 2 | RNVC: 2
RPM25: RNCC: 5 | RNVC: 2
SYB0291: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-15-009-8711
Hand Reamer

150098711
570/4,5: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-15-199-0805
Hand File

151990805
2600/3-8: RNCC: 3 | RNVC: 2
D2600/3-8: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-27-046-3415
Hand Wire Stripper

270463415
3750 12 0160: RNCC: 2 | RNVC: 1

30 Jul 2009

5110-14-276-9635
Pocket Scissors

142769635
NO PRIMARY REF14-276-9635: RNCC: 3 | RNVC: 2
113: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-213-5608
Hand File

142135608
E75001LG100C: RNCC: 2 | RNVC: 2
0913100301: RNCC: 3 | RNVC: 2
913-100D: RNCC: 3 | RNVC: 2

1 Jan 1964

5110-15-104-9642
End Cutting Nippers

151049642
2/20671-13.03.73-US: RNCC: 3 | RNVC: 2

30 May 1989

5110-15-009-8707
Hand Reamer

150098707
570/8: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-15-194-8901
Block Plane

151948901
1-12-139: RNCC: 3 | RNVC: 2
(241)A61541-12-139: RNCC: 5 | RNVC: 2

31 Jan 2011

5110-15-054-2302
Hatchet Handle

150542302
56-6-350: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-207-1049
Hand Bench Shears

142071049
3917RL: RNCC: 3 | RNVC: 9

1 Jan 1964

5110-14-206-8258
Hand Rasp

142068258
E75001RB250C: RNCC: 2 | RNVC: 2
SYB0274: RNCC: 5 | RNVC: 2

1 Jan 1964

5110-15-075-0825
Hand File

150750825
1D180VNI5669A: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-33-103-9191
Hand File

331039191
359.160: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-074-6043
Hand File

150746043
1-1-2D350UNI5500: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-195-9475
Hand File

151959475
017200108: RNCC: 3 | RNVC: 2

30 May 2011

5110-15-074-6031
Hand File

150746031
2D350UNI5500: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-206-2160
Hand Drill

152062160
BSZ14,4IMPULS: RNCC: 3 | RNVC: 2
(241)A9851BSZ14,4IMPULS: RNCC: 5 | RNVC: 2

28 May 2012

5110-14-235-4109
Hand Reamer

142354109
E66012A4RS: RNCC: 2 | RNVC: 2

1 Jan 1967

5110-15-074-6232
Hand Rasp

150746232
1-2D250UNI5524: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-120-9075
Hand File

151209075
STD/04.046: RNCC: 3 | RNVC: 2

4 Sep 1995

5110-14-273-7458
Hand Reamer

142737458
E74103-3RS: RNCC: 2 | RNVC: 2
R603-3: RNCC: 3 | RNVC: 2
8040021-3: RNCC: 3 | RNVC: 2
703CY3: RNCC: 3 | RNVC: 2
D6600.030: RNCC: 3 | RNVC: 2
SYQ1806: RNCC: 5 | RNVC: 2
166-3: RNCC: 5 | RNVC: 2
F1111-3: RNCC: 5 | RNVC: 2
1080-3: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-530-3029
Hand Hacksaw Blade

145303029
660A.10: RNCC: 3 | RNVC: 2
3148511919125: RNCC: 5 | RNVC: 2

29 May 2002

5110-15-074-6086
Hand File

150746086
14INART102MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-452-3501
Tailor's Shears

144523501
841.6: RNCC: 3 | RNVC: 2
3148512069522: RNCC: 5 | RNVC: 2
91710608: RNCC: 5 | RNVC: 2
0206952: RNCC: 5 | RNVC: 9

8 Jan 1992

5110-14-454-8796
Hand File

144548796
AIG.PAM140T2: RNCC: 3 | RNVC: 2
3148516315700: RNCC: 5 | RNVC: 2
AIGPAM140T2: RNCC: 5 | RNVC: 2
0631570: RNCC: 5 | RNVC: 9

24 Apr 1992

5110-15-068-3920
Hand Reamer

150683920
12000-9,5: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-15-050-9115
Hand File

150509115
D250UNI5487A: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-050-7720
Hand Rasp

150507720
B250UNI5523-64: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-383-8654
Hand Reamer

143838654
E74112-11-5RS: RNCC: 2 | RNVC: 2
F-P-11-5: RNCC: 3 | RNVC: 2
164-11-5: RNCC: 3 | RNVC: 2

11 Apr 1983

5110-14-436-4253
Hand File

144364253
238L150: RNCC: 3 | RNVC: 2

3 Jan 1990

5110-15-199-0987
Firmer Chisel

151990987
6055/1-24: RNCC: 3 | RNVC: 2
B6055/1-24: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-302-4847
Hand Reamer

143024847
3130S95-84-002: RNCC: 3 | RNVC: 2

1 Jan 1973

5110-14-271-5923
Hand Reamer

142715923
E74111-19RS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-27-018-5779
Bolt Cutter

270185779
5110-03072-00009: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-074-6247
Hand Rasp

150746247
B300UNI5522: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-328-7189
Pocket Knife

143287189
NO PRIMARY REF14-328-7189: RNCC: 3 | RNVC: 2
2815-4: RNCC: 5 | RNVC: 9

2 Jul 1975

5110-14-274-8294
Hand File

142748294
507-2-140: RNCC: 3 | RNVC: 2
2407-140-4: RNCC: 3 | RNVC: 2
4477-140-4: RNCC: 3 | RNVC: 2
1555: RNCC: 5 | RNVC: 2
TD140: RNCC: 5 | RNVC: 2
SYQ0918: RNCC: 5 | RNVC: 2
85-684-9110: RNCC: 6 | RNVC: 9

1 Jan 1971

5110-14-464-4965
Hand Reamer

144644965
854-600-031-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5110-14-516-6527
Coping Saw

145166527
SCIE A NEIGE NGI0-80300: RNCC: 2 | RNVC: 2

8 Oct 1999

5110-14-521-1145
Knife Blade

145211145
B002713A: RNCC: 3 | RNVC: 2

11 Jul 2000

5110-15-155-7067
Hand Graver

151557067
D636.76.779: RNCC: 3 | RNVC: 2
D63676779: RNCC: 3 | RNVC: 2

22 May 2002

5110-33-155-1108
Hand File

331551108
LIMA CUADRADA SEMI-FINA 8": RNCC: 3 | RNVC: 2
424102: RNCC: 5 | RNVC: 2

13 Jun 1990

5110-14-238-5455
Hand Reamer

142385455
E66003-15RS: RNCC: 2 | RNVC: 2

1 Jan 1967

5110-27-045-4150
Broad Hatchet

270454150
UYT-130-BL: RNCC: 2 | RNVC: 2

7 May 2009

5110-15-074-6170
Hand File

150746170
12-107BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-063-3905
Hand File

150633905
24-187: RNCC: 3 | RNVC: 2

7 Oct 1982

5110-14-438-9579
Hand Reamer

144389579
330A97-2102-23: RNCC: 3 | RNVC: 2

11 Apr 1990

5110-15-052-4079
Hand Reamer

150524079
1450G8: RNCC: 3 | RNVC: 2

10 Apr 1970

5110-14-271-5951
Hand Reamer

142715951
E74111-10-5FS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-33-102-3324
Bolt Cutter

331023324
297.108: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-33-155-1126
Hand File

331551126
LIMA PLANA S/FINA 8": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-14-369-7124
Hand Reamer

143697124
E74112-32RS: RNCC: 2 | RNVC: 2
20020-32: RNCC: 3 | RNVC: 2

17 Apr 1981

5110-14-300-3835
Hand File

143003835
0953150204: RNCC: 3 | RNVC: 2
403-MD-150: RNCC: 3 | RNVC: 2
ST6283: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-14-541-8966
Knife Blade

145418966
376M240: RNCC: 3 | RNVC: 2

2 Jul 2004

5110-33-103-9224
Hand File

331039224
360.451: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-055-3624
Hand File

150553624
1-2D125UNI5490A: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-33-103-9114
Hand File

331039114
350.452: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-15-145-0274
Ratchet Drill

151450274
22299202: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-15-074-6294
Hand Reamer

150746294
46UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-003-8679
Hand File

330038679
2402-160: RNCC: 3 | RNVC: 2

21 Jul 1998

5110-15-074-6886
Hand Cold Chisel

150746886
150-22A25FIG26: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-27-047-9603
Hand Cold Chisel

270479603
03375250625: RNCC: 3 | RNVC: 2

24 Dec 2009

5110-14-404-8317
Hand File

144048317
2410-160-2: RNCC: 3 | RNVC: 2

20 Nov 1985

5110-27-015-8805
Docking Hand Saw

270158805
1-15-599: RNCC: 2 | RNVC: 1
99999-NIIN-DA0037580: RNCC: 2 | RNVC: 1
1-15-599: RNCC: 5 | RNVC: 9

17 Dec 2002

5110-14-204-8346
Hand File

142048346
E75001LC300C: RNCC: 2 | RNVC: 2
DRD.D300: RNCC: 3 | RNVC: 2
910-300D: RNCC: 3 | RNVC: 2
0910300301: RNCC: 3 | RNVC: 2
3148516025005: RNCC: 5 | RNVC: 2
DRDD300: RNCC: 5 | RNVC: 2
0714 61 44: RNCC: 5 | RNVC: 2
130336: RNCC: 5 | RNVC: 2
0602500: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-33-003-6155
Hand File

330036155
424508: RNCC: 3 | RNVC: 2

25 May 1998

5110-15-074-6692
Hand Reamer

150746692
30-55UNI535ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-000-8008
Hand Cold Chisel

270008008
5500 40 0125: RNCC: 3 | RNVC: 2

23 Oct 1990

5110-14-271-5899
Hand Reamer

142715899
E74111-30RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-33-192-5294
Back Saw

331925294
8831.010: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-074-6131
Hand File

150746131
14-104MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-488-5323
Hand Reamer

144885323
F-P-52H7: RNCC: 3 | RNVC: 2
FP52H7: RNCC: 5 | RNVC: 2

15 May 1997

5110-14-244-0854
Hand Reamer

142440854
E74111-29FS: RNCC: 2 | RNVC: 2
20020-29: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-14-274-7981
Firmer Chisel

142747981
E73-201-55EMMANCHE: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-14-201-9884
Keyhole Saw

142019884
322-30: RNCC: 3 | RNVC: 9
B540A30: RNCC: 3 | RNVC: 9
322: RNCC: 5 | RNVC: 2
4565: RNCC: 5 | RNVC: 9
2614: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-33-108-0093
Hand Cold Chisel

331080093
74050-200: RNCC: 3 | RNVC: 2

27 Nov 2000

5110-15-199-0802
Hand File

151990802
2600/1-12: RNCC: 3 | RNVC: 2
D2600/1-12: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-375-0961
Hand File

143750961
NO PRIMARY REF14-375-0961: RNCC: 3 | RNVC: 2
1666-3-75: RNCC: 5 | RNVC: 9

30 Jan 1982

5110-15-074-3272
Hand File

150743272
D200UNI5487B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-235-4111
Hand Reamer

142354111
E66012A3RS: RNCC: 2 | RNVC: 2

1 Jan 1967

5110-15-074-5811
Hand File

150745811
B150UNI5493: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-252-9090
Hand Wire Stripper

142529090
105110: RNCC: 3 | RNVC: 2
863554: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-14-204-8140
Wood Scraper

142048140
NO PRIMARY REF14-204-8140: RNCC: 3 | RNVC: 2
3228: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-15-074-5832
Hand File

150745832
D400UNI5493: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-327-4623
Hand File

143274623
5110CBLIME1TMIR0NDET0UR350MID0U: RNCC: 2 | RNVC: 2

2 Jul 1975

5110-15-050-6066
Hand File

150506066
1-2D300UNI5502B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-271-6049
Hand File

142716049
E75001LG100B: RNCC: 2 | RNVC: 2
CAR.MD100: RNCC: 3 | RNVC: 2
0913100201: RNCC: 3 | RNVC: 2
913-100DD: RNCC: 3 | RNVC: 2
0913100204: RNCC: 3 | RNVC: 2
111-MD-100: RNCC: 3 | RNVC: 2
3148516030702: RNCC: 5 | RNVC: 2
CAR.MD 100: RNCC: 5 | RNVC: 2
CARMD100: RNCC: 5 | RNVC: 2
0603070: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-33-106-1224
Hand File

331061224
420203: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-14-427-1446
Circle Cutter

144271446
6252-59201: RNCC: 3 | RNVC: 2

6 Oct 1988

5110-15-074-5926
Hand File

150745926
1-2D200UNI5498: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-528-8547
Hand File

145288547
CAR.B250: RNCC: 3 | RNVC: 2
3148516029201: RNCC: 5 | RNVC: 2
SYQ0830: RNCC: 5 | RNVC: 2
0602920: RNCC: 5 | RNVC: 9

20 Feb 2002

5110-14-379-1249
Hand Reamer

143791249
14231-42876: RNCC: 3 | RNVC: 2

6 Sep 1982

5110-14-273-7457
Hand Reamer

142737457
E74103-2-5RS: RNCC: 2 | RNVC: 2
R603-2-5: RNCC: 3 | RNVC: 2
166-2-5: RNCC: 3 | RNVC: 2
1080-2-5: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-33-155-1302
Hand File

331551302
LIMA TIRANGULAR BASTA 8": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-14-210-5449
Hand File

142105449
E75001LE150B: RNCC: 2 | RNVC: 2
0912150201: RNCC: 3 | RNVC: 2
912-150DD: RNCC: 3 | RNVC: 2
0912150204: RNCC: 3 | RNVC: 2
112-MD-150: RNCC: 3 | RNVC: 2
112DEMID0UCE150: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-33-155-1102
Hand File

331551102
LIMA CUADRADA FINA 10IN: RNCC: 3 | RNVC: 2

13 Jun 1990

5110-15-052-4699
Breast Drill

150524699
1206: RNCC: 3 | RNVC: 2

10 Apr 1974

5110-15-074-6324
Hand Reamer

150746324
34UNI525ACCLEGUT: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-289-1463
Pocket Knife

142891463
C0UTEAU1-417: RNCC: 3 | RNVC: 2

1 Jan 1972

5110-15-116-3720
File Handle

151163720
100: RNCC: 3 | RNVC: 2

28 Apr 1993

5110-15-074-6676
Hand Reamer

150746676
30-55UNI535ACCIAI0CARB0NI0SPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-276-3223
Hand Reamer

142763223
E74112-39RS: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-15-074-6923
Firmer Chisel

150746923
10ART106CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-274-8533
Single Bit Ax

142748533
0504000201: RNCC: 3 | RNVC: 2
504: RNCC: 5 | RNVC: 2

15 Nov 2000

5110-33-005-4421
File Handle

330054421
369.256: RNCC: 3 | RNVC: 2

25 Jul 2001

5110-33-156-5762
Scraper Blade

331565762
790.293: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-33-204-0224
Doweling Jig

332040224
U3-AYC1138-1001: RNCC: 3 | RNVC: 2

3 Feb 2005

5110-14-447-1337
Dimpling Punch

144471337
851-910-111-6: RNCC: 3 | RNVC: 2

3 May 1991

5110-15-054-4818
End Cutting Nippers

150544818
580G180: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-074-6856
Hand Cold Chisel

150746856
125-15ART32650CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-437-5761
Hand File

144375761
NO PRIMARY REF14-437-5761: RNCC: 3 | RNVC: 2
91592356: RNCC: 5 | RNVC: 2
AIGPAMBR180T0: RNCC: 5 | RNVC: 2

7 Feb 1990

5110-14-201-5288
Firmer Chisel

142015288
E73-201CISEAUDEMENUISIER20: RNCC: 2 | RNVC: 2
7011200201: RNCC: 3 | RNVC: 2
3303807011178: RNCC: 5 | RNVC: 2
SYQ0707: RNCC: 5 | RNVC: 2
628-2LI0NS20: RNCC: 5 | RNVC: 9
628-20: RNCC: 5 | RNVC: 9
C111E20: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-27-056-2261
Hand Drill

270562261
D8056-1177103: RNCC: 2 | RNVC: 2

1 Mar 2012

5110-14-449-0835
Hand File

144490835
511-3-180: RNCC: 3 | RNVC: 2

24 Jul 1991

5110-33-005-4208
Tube Cutter

330054208
276.050: RNCC: 3 | RNVC: 2

23 Jul 2001

5110-15-199-0806
Hand File

151990806
2603/1-10: RNCC: 3 | RNVC: 2
D2603/1-10: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-063-9407
Hand File

150639407
62321-35/121: RNCC: 3 | RNVC: 2

25 May 1983

5110-15-078-6525
Hand Reamer

150786525
21UNI525TAGLIENTIELICACCSUPERRA-: RNCC: 2 | RNVC: 1

1 Jan 1974

5110-14-232-4406
Hand Cold Chisel

142324406
26-140: RNCC: 3 | RNVC: 2

1 Jan 1967

5110-15-114-3781
Hand Hacksaw Blade

151143781
C5757131: RNCC: 3 | RNVC: 2

9 Jun 1992

5110-15-074-7055
Firmer Gouge

150747055
14ART113: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6639
Hand Reamer

150746639
10UNI532ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-416-1487
Hand File

144161487
904-300DD: RNCC: 3 | RNVC: 2

3 Jun 1987

5110-15-009-8739
Hand File

150098739
2560/1/12: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-14-424-2458
Rip Hand Saw

144242458
NO PRIMARY REF14-424-2458: RNCC: 3 | RNVC: 2
91616857: RNCC: 5 | RNVC: 2
160-60: RNCC: 5 | RNVC: 9

19 May 1988

5110-27-010-7974
Double Bit Ax

270107974
99999-NIIN-DA0037636: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-14-468-9226
Hand Cape Chisel

144689226
1267-30P: RNCC: 3 | RNVC: 2
3148512260356: RNCC: 5 | RNVC: 2
300-6405: RNCC: 5 | RNVC: 2
FACOM1267-30P: RNCC: 5 | RNVC: 9

29 Mar 1994

5110-33-203-4058
Hand File

332034058
0915.00823: RNCC: 3 | RNVC: 2

1 Apr 2004

5110-14-271-6137
Hand File

142716137
E75001LM100B: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-469-1678
Hand Wire Stripper

144691678
240-20: RNCC: 3 | RNVC: 2
240.20: RNCC: 3 | RNVC: 2
3272670344631: RNCC: 5 | RNVC: 2

11 Apr 1994

5110-14-540-5473
Hand Hacksaw Frame

145405473
0490 70: RNCC: 3 | RNVC: 2
0490700: RNCC: 5 | RNVC: 9

1 Apr 2004

5110-15-074-6895
Hand Masonry Drill

150746895
250-15ART42410: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-194-8100
Hand File

151948100
09900136: RNCC: 3 | RNVC: 2
990 B PA: RNCC: 3 | RNVC: 2
(241)A157209900136: RNCC: 5 | RNVC: 2

21 Jan 2011

5110-14-551-4651
Chisel Bar

145514651
143-8-N: RNCC: 3 | RNVC: 2

25 Sep 2006

5110-33-211-4837
Knife Blade

332114837
AC-500B: RNCC: 3 | RNVC: 2
H3 3430: RNCC: 5 | RNVC: 2

17 Nov 2013

5110-14-420-9556
Circle Cutter

144209556
245.J2: RNCC: 3 | RNVC: 2
3148511578605: RNCC: 5 | RNVC: 2
0157860: RNCC: 5 | RNVC: 9

6 Jan 1988

Load More Results