What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 34 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 34of 112

5110-33-103-9099
Hand File

331039099
350.262: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-15-180-7702
Hand Post Drill

151807702
OMP-MCC-054: RNCC: 3 | RNVC: 2
(241)AE591OMP-MCC-054: RNCC: 5 | RNVC: 2

22 Jul 2008

5110-15-000-2791
Hand File

150002791
S2300GF: RNCC: 3 | RNVC: 2

14 Feb 2013

5110-15-068-3922
Hand Reamer

150683922
12000-10,5: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-33-211-4761
Knife Blade

332114761
SPB-0007: RNCC: 3 | RNVC: 2

16 Nov 2013

5110-27-010-7978
Double Bit Ax

270107978
99999-NIIN-DA0013653: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-14-464-4953
Hand Reamer

144644953
854-600-019-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5110-15-074-5960
Hand File

150745960
81-2D140UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-270-3930
Hand Reamer

142703930
E66011A5-5RN: RNCC: 2 | RNVC: 1
1140-5-5: RNCC: 5 | RNVC: 9
30-05-5-5: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-33-003-6150
Hand File

330036150
418002: RNCC: 3 | RNVC: 2

25 May 1998

5110-27-004-3084
Bolt Cutter

270043084
05001MA0023: RNCC: 3 | RNVC: 2

28 Aug 1995

5110-14-204-8340
Hand File

142048340
E75001LC200C: RNCC: 2 | RNVC: 2
DRD.D200: RNCC: 3 | RNVC: 2
0910200301: RNCC: 3 | RNVC: 2
910-200D: RNCC: 3 | RNVC: 2
3148516024305: RNCC: 5 | RNVC: 2
101846: RNCC: 5 | RNVC: 2
DRDD200: RNCC: 5 | RNVC: 2
0714 61 42: RNCC: 5 | RNVC: 2
0602430: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-33-103-9415
Hand Cable Stripper

331039415
790.110: RNCC: 3 | RNVC: 2

23 Jun 1995

5110-15-074-6333
Hand Reamer

150746333
48UNI525ACCLEGUT: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-102-3318
Bolt Cutter

331023318
297.007: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-33-103-9214
Hand File

331039214
360.212: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-39-000-0145
Single Bit Ax

390000145
NOMIM 3991392077: RNCC: 2 | RNVC: 2
TOPOR MILITAR: RNCC: 5 | RNVC: 2

22 Jan 2002

5110-15-074-6644
Hand Reamer

150746644
30UNI532ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-199-1011
Circle Cutter

151991011
3690-400: RNCC: 3 | RNVC: 2

12 Jan 2005

5110-15-074-6524
Hand Reamer

150746524
20UNI525TAGLIENTIELICACCSUPERRA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-6722
Hand Reamer

150746722
10-5UNI538ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6947
Firmer Chisel

150746947
26ART108: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-7027
Turning Chisel

150747027
15ART102CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6572
Hand Reamer

150746572
1UNI524ACCIAI0LEGAT0DAUTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6718
Hand Reamer

150746718
26UNI538ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-005-4225
Hand File

330054225
350.553: RNCC: 3 | RNVC: 2

23 Jul 2001

5110-33-103-9107
Hand File

331039107
350.412: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-15-074-6594
Hand Reamer

150746594
1-5UNI531ACCIAI0CARB0NI0SPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6623
Hand Reamer

150746623
5UNI532ACCIAI0CARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6624
Hand Reamer

150746624
6UNI532ACCIAI0CARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-195-3887
Hand File Set

151953887
E194SE12: RNCC: 3 | RNVC: 2
(241)A5964E194SE12: RNCC: 5 | RNVC: 2

21 Mar 2011

5110-15-074-6334
Hand Reamer

150746334
50UNI525ACCLEGUT: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-197-2089
Pipe Cutter

151972089
PN UAS 00032344: RNCC: 3 | RNVC: 2
5110F76029003: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-074-6579
Hand Reamer

150746579
1UNI524ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6686
Hand Reamer

150746686
45-75UNI535ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-274-7905
Keyhole Saw

142747905
542: RNCC: 3 | RNVC: 2
4565-35: RNCC: 3 | RNVC: 9
322-35: RNCC: 5 | RNVC: 2
322-35: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-068-3919
Hand Reamer

150683919
12000-9: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-15-074-6119
Hand File

150746119
10INART103D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-270-4556
Bolt Cutter

142704556
888LR3: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-15-054-1405
Hand Hacksaw Blade

150541405
2500G22: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-074-6924
Firmer Chisel

150746924
12ART106CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6588
Hand Reamer

150746588
2UNI524ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-048-4524
Scraper Blade

270484524
CJ.2000.20: RNCC: 2 | RNVC: 1

10 Feb 2010

5110-15-074-6380
Hand Reamer

150746380
10UNI525ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6527
Hand Reamer

150746527
23UNI525TAGLIENTIELICACCSUPERRA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-6282
Hand Reamer

150746282
26UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6972
Firmer Chisel

150746972
35ART109: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-27-015-8892
Turning Chisel

270158892
99999-NIIN-DA0030043: RNCC: 2 | RNVC: 1

17 Dec 2002

5110-15-074-6454
Hand Reamer

150746454
26UNI525TAGLIENTIELICACCLEGUTEN-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-14-210-6907
Hand Reamer Set

142106907
NO PRIMARY REF14-210-6907: RNCC: 3 | RNVC: 2
R8B: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-14-274-8060
Hand File

142748060
2410-140-0: RNCC: 3 | RNVC: 2
510-00-140: RNCC: 3 | RNVC: 2
687-140-0: RNCC: 5 | RNVC: 2
RB140: RNCC: 5 | RNVC: 2
SYQ0070: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-14-338-3096
Firmer Chisel

143383096
E73-201CISEAUDEMENUISIER16: RNCC: 2 | RNVC: 2
E73-201CISEAUDEMENUISIER15: RNCC: 5 | RNVC: 1
628-2LI0NS15: RNCC: 5 | RNVC: 2
628-15: RNCC: 5 | RNVC: 9
C111E15: RNCC: 5 | RNVC: 9

6 Nov 1976

5110-33-203-4045
Hatchet Handle

332034045
054203: RNCC: 3 | RNVC: 2

1 Apr 2004

5110-27-044-0868
Hand File Set

270440868
J75-R06: RNCC: 2 | RNVC: 1

6 Jan 2009

5110-15-001-2661
Hand File

150012661
1719BMD8/P: RNCC: 3 | RNVC: 2

11 Jun 2013

5110-14-305-1998
Brick Chisel

143051998
P0INTER0LLE400MM: RNCC: 3 | RNVC: 9

1 Jan 1974

5110-15-074-6859
Hand Cold Chisel

150746859
250-25ART32650CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-449-0829
Hand File

144490829
501-3-180: RNCC: 3 | RNVC: 2

24 Jul 1991

5110-15-107-2965
Hand File

151072965
62321-30/252: RNCC: 3 | RNVC: 2

10 May 1988

5110-27-015-8808
Turning Chisel

270158808
99999-NIIN-DA0037505: RNCC: 2 | RNVC: 1

17 Dec 2002

5110-15-068-3929
Hand Reamer

150683929
12000-16: RNCC: 3 | RNVC: 2

23 Sep 1986

5110-15-209-9762
Hand Graver

152099762
368003: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-074-6889
Hand Cold Chisel

150746889
200-10FIG26: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6677
Hand Reamer

150746677
37-65UNI535ACCIAI0CARB0NI0SPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-529-9455
Hand Reamer

145299455
M20170: RNCC: 3 | RNVC: 2

24 Apr 2002

5110-15-074-6080
Hand File

150746080
12INART102B: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-370-1120
Bolt Cutter

143701120
999A4: RNCC: 3 | RNVC: 2
130073: RNCC: 5 | RNVC: 2

18 May 1981

5110-14-271-6070
Hand File

142716070
E75001LK200B: RNCC: 2 | RNVC: 2
0923200201: RNCC: 3 | RNVC: 2
923-200DD: RNCC: 3 | RNVC: 2
0923200204: RNCC: 3 | RNVC: 2
113-MID-200: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-15-074-6921
Firmer Chisel

150746921
6ART106CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-9039
Hand Reamer

150749039
46UNI525ACCSUPER: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-468-9406
Broad Hatchet

144689406
94112-600GEF: RNCC: 3 | RNVC: 2

30 Mar 1994

5110-15-165-3647
Single Bit Ax

151653647
B90200500: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-192-9475
Craftsman's Knife

151929475
660 RAPTOR EOD: RNCC: 3 | RNVC: 2
(241)AB595660RAPTOREOD: RNCC: 5 | RNVC: 2

29 Mar 2010

5110-14-204-8815
Rip Hand Saw

142048815
NO PRIMARY REF14-204-8815: RNCC: 3 | RNVC: 2
16-65: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-15-199-0962
Broad Hatchet

151990962
3582-1600: RNCC: 3 | RNVC: 2

12 Jan 2005

5110-15-154-4929
End Cutting Nippers

151544929
A1001927: RNCC: 3 | RNVC: 2

20 Jun 2001

5110-15-074-6537
Hand Reamer

150746537
38UNI525TAGLIENTIELICACCSUPERRA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-27-024-5937
Adz Handle

270245937
05001FS0169: RNCC: 2 | RNVC: 1

13 Nov 2004

5110-14-204-9389
Wood Scraper

142049389
NO PRIMARY REF14-204-9389: RNCC: 3 | RNVC: 2
511-120X55X6-10: RNCC: 5 | RNVC: 2
511E: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-14-244-3719
Hand Reamer

142443719
E74111-34FS: RNCC: 2 | RNVC: 2

1 Jan 1968

5110-33-203-4143
Hand File Set

332034143
359.006: RNCC: 3 | RNVC: 2

2 Apr 2004

5110-33-125-5135
Single Bit Ax

331255135
HACHA DE DOS MANOS: RNCC: 3 | RNVC: 2

13 Jun 1990

5110-14-276-3221
Hand Reamer

142763221
E74112-33RS: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-14-429-3064
Hand Reamer

144293064
853-600-072-0: RNCC: 3 | RNVC: 2

11 Jan 1989

5110-15-074-6619
Hand Reamer

150746619
2UNI532ACCIAI0CARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-270-4002
Hand Reamer

142704002
E74104-52RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-074-6595
Hand Reamer

150746595
2UNI531ACCIAI0CARB0NI0SPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-541-6839
Bolt Cutter

145416839
028715MMTBARREAMINILG1500MMAL-BR: RNCC: 3 | RNVC: 2

17 Jun 2004

5110-27-056-3443
Corner Bit Brace

270563443
2.HIBM-T07/56-12: RNCC: 2 | RNVC: 1

15 Mar 2012

5110-14-525-9089
Hand Wire Stripper

145259089
985962: RNCC: 3 | RNVC: 2

20 Jun 2001

5110-14-370-6531
Pinking Shears

143706531
842: RNCC: 3 | RNVC: 2

5 Jun 1981

5110-15-179-5874
Scraping Knife

151795874
3000 - 8110901: RNCC: 3 | RNVC: 2

11 Apr 2007

5110-33-103-9079
Hand File

331039079
350.153: RNCC: 3 | RNVC: 2

22 Jun 1995

5110-14-213-5605
Hand File

142135605
E75001LE100C: RNCC: 2 | RNVC: 2
0912100301: RNCC: 3 | RNVC: 2
912-100D: RNCC: 3 | RNVC: 2
0912100304: RNCC: 3 | RNVC: 2
112-DX-100: RNCC: 3 | RNVC: 2

1 Jan 1964

5110-14-370-8402
Ladies' Scissors

143708402
NO PRIMARY REF14-370-8402: RNCC: 3 | RNVC: 2
130543: RNCC: 5 | RNVC: 2
615-18: RNCC: 5 | RNVC: 9
C0P2457-6 1 2: RNCC: 5 | RNVC: 9

5 Jun 1981

5110-15-197-4011
Knife Blade

151974011
PN UAS 00042434: RNCC: 3 | RNVC: 2
7520F76035255: RNCC: 5 | RNVC: 9

8 Apr 2004

5110-14-232-2172
Hand Reamer

142322172
E66003A5-5HS: RNCC: 2 | RNVC: 2
3088-5-50: RNCC: 5 | RNVC: 9

1 Jan 1967

5110-33-155-9488
Hand Graver

331559488
DIN 6453: RNCC: 2 | RNVC: 2
5212.015: RNCC: 3 | RNVC: 2
50506: RNCC: 3 | RNVC: 2
312.150: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-27-059-9895
Hand Drill

270599895
DCD785C2: RNCC: 2 | RNVC: 1

20 Dec 2013

5110-33-002-5714
Pliers

330025714
SER-702-713: RNCC: 3 | RNVC: 2

9 Mar 1995

5110-15-074-6530
Hand Reamer

150746530
26UNI525TAGLIENTIELICACCSUPERRA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-14-487-6274
Bolt Cutter Jaws

144876274
990.LA1: RNCC: 3 | RNVC: 2
3148512174905: RNCC: 5 | RNVC: 2
0217490: RNCC: 5 | RNVC: 9

15 Apr 1997

5110-14-512-0556
Hand File

145120556
AIG-0V180T2: RNCC: 3 | RNVC: 2
AIG0V180T2: RNCC: 5 | RNVC: 2

3 Feb 1999

5110-14-274-8079
Hand File

142748079
2401-180-0: RNCC: 3 | RNVC: 2
680-180-0: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-15-000-2784
Poising Saw

150002784
S2613E: RNCC: 3 | RNVC: 2

14 Feb 2013

5110-33-203-3957
Hand Wire Stripper

332033957
DIN 5232: RNCC: 2 | RNVC: 2
012.260: RNCC: 3 | RNVC: 2
12.260: RNCC: 3 | RNVC: 2
62906: RNCC: 3 | RNVC: 2
72 8740: RNCC: 5 | RNVC: 2

1 Apr 2004

5110-15-194-9404
Hand Wire Stripper

151949404
77.01.045: RNCC: 3 | RNVC: 2
(241)AD35177.01.045: RNCC: 5 | RNVC: 2

8 Feb 2011

5110-27-000-8173
Adz

270008173
6400 24 0600: RNCC: 2 | RNVC: 1
03020203039: RNCC: 2 | RNVC: 1
8603: RNCC: 2 | RNVC: 1
03020203039: RNCC: 2 | RNVC: 1
6400 03 0600: RNCC: 3 | RNVC: 2
6400 24 0600: RNCC: 5 | RNVC: 9

11 Jun 1991

5110-14-271-6038
Hand File

142716038
E75001LC250B: RNCC: 2 | RNVC: 2
0910250201: RNCC: 3 | RNVC: 2
910-250DD: RNCC: 3 | RNVC: 2
0910250204: RNCC: 3 | RNVC: 2
109-MD-250: RNCC: 3 | RNVC: 2
MM25: RNCC: 5 | RNVC: 2
SYQ0907: RNCC: 5 | RNVC: 2

1 Jan 1970

5110-14-401-5213
Hand File

144015213
NO PRIMARY REF14-401-5213: RNCC: 3 | RNVC: 2
PLP.B200: RNCC: 5 | RNVC: 2
PLPB200: RNCC: 5 | RNVC: 2

13 Jun 1985

5110-14-271-6139
Hand File

142716139
E75001LM250B: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-155-7128
Hand Reamer

151557128
S2383: RNCC: 3 | RNVC: 2

23 May 2002

5110-15-074-6714
Hand Reamer

150746714
14UNI538ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-195-3900
Riffler

151953900
570B: RNCC: 3 | RNVC: 2
(241)A5964570B: RNCC: 5 | RNVC: 2

21 Mar 2011

5110-14-540-3864
Miter Box

145403864
376M1790: RNCC: 3 | RNVC: 2

20 Mar 2004

5110-15-074-6081
Hand File

150746081
14INART102BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-530-3002
Hand Wire Stripper

145303002
165.3: RNCC: 3 | RNVC: 2

29 May 2002

5110-14-274-8075
Hand File

142748075
2411-140-2: RNCC: 3 | RNVC: 2
511-0-180: RNCC: 3 | RNVC: 2
689-140-2: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-15-074-6093
Hand File

150746093
8INART104BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-27-018-8496
Corner Bit Brace

270188496
642064: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-055-3582
Firmer Chisel

150553582
6052-28: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-244-0639
Hand Reamer

142440639
E66012A9RS: RNCC: 2 | RNVC: 2

1 Jan 1968

5110-15-068-3957
Hand Hacksaw Blade

150683957
2728/4-24-12: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-33-106-4503
Firmer Chisel

331064503
424-30: RNCC: 3 | RNVC: 2

9 Feb 1998

5110-33-103-9233
Hand File

331039233
360.652: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-074-6894
Hand Masonry Drill

150746894
200-15ART42410: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6259
Hand Reamer

150746259
3UNI525ACCCARSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-378-2689
Hand Reamer

143782689
E66-003-9HELICOIDALRS: RNCC: 2 | RNVC: 2
169-9: RNCC: 3 | RNVC: 2

20 Jul 1982

5110-14-481-4102
Hand Cape Chisel

144814102
GS80-13: RNCC: 3 | RNVC: 2

4 May 1996

5110-14-201-7248
Hand Reamer

142017248
E74104-180RN: RNCC: 2 | RNVC: 2

1 Jan 1962

5110-33-103-9254
Hand File

331039254
362.622: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-33-156-5816
Hand Hacksaw Blade

331565816
429.024: RNCC: 3 | RNVC: 2
51400.00240: RNCC: 3 | RNVC: 2
803.22: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-14-244-3649
Hand Reamer

142443649
E74112-4,5: RNCC: 2 | RNVC: 2
20020-4,5: RNCC: 3 | RNVC: 2
R601-4,5: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-14-417-1418
Hand Post Drill

144171418
8D: RNCC: 3 | RNVC: 2

1 Jul 1987

5110-14-218-4252
Hand File

142184252
E75001LC100A: RNCC: 2 | RNVC: 2
0910100104: RNCC: 3 | RNVC: 2
109-BA-100: RNCC: 3 | RNVC: 2
0910100101: RNCC: 3 | RNVC: 2
910-100B: RNCC: 3 | RNVC: 2
E75-001DEMIR0NDEBATARDE100: RNCC: 5 | RNVC: 2
MB10: RNCC: 5 | RNVC: 2
SYQ0920: RNCC: 5 | RNVC: 2

1 Jan 1965

5110-15-050-9072
Hand File

150509072
B300UNI5493: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-074-6695
Hand Reamer

150746695
4-10UNI535ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-179-4958
Firmer Chisel

151794958
2-16-383: RNCC: 3 | RNVC: 2
00.07.57.78: RNCC: 5 | RNVC: 2

22 Jan 2007

5110-15-052-4056
Hand File

150524056
B225UNI5494: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-116-1731
Hand Cold Chisel

151161731
180597113: RNCC: 3 | RNVC: 2
(241)A0199180597113: RNCC: 5 | RNVC: 2

24 Mar 1993

5110-15-189-1284
Hand Post Drill

151891284
BOS 28: RNCC: 3 | RNVC: 2
(241)AJ100BOS28: RNCC: 5 | RNVC: 2

27 Jan 2010

5110-14-464-4963
Hand Reamer

144644963
854-600-029-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5110-15-074-5814
Hand File

150745814
B300UNI5493B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-401-5207
Hand File Set

144015207
CLE.DAM100: RNCC: 3 | RNVC: 2
3148516093103: RNCC: 5 | RNVC: 2
CLEDAM100: RNCC: 5 | RNVC: 2
18513916-3: RNCC: 5 | RNVC: 2
91626504: RNCC: 5 | RNVC: 2
0609310: RNCC: 5 | RNVC: 9
CLEDAM: RNCC: 5 | RNVC: 9

13 Jun 1985

5110-14-523-8140
Hand Cold Chisel

145238140
FACOM 263P30: RNCC: 3 | RNVC: 2

2 Feb 2001

5110-14-284-9907
Bolt Cutter

142849907
150-00A: RNCC: 3 | RNVC: 2
3272670295599: RNCC: 5 | RNVC: 2
150-0: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-33-103-9219
Hand File

331039219
360.261: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-244-0910
Hand Reamer

142440910
NF E 66-003/31: RNCC: 2 | RNVC: 2
8040101-31: RNCC: 3 | RNVC: 2
E66-003-31: RNCC: 5 | RNVC: 2
E74104-31FS: RNCC: 5 | RNVC: 2
TKF8040101-31: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-14-406-8139
Rip Hand Saw

144068139
NO PRIMARY REF14-406-8139: RNCC: 3 | RNVC: 2
C31445E: RNCC: 5 | RNVC: 9
C314-45: RNCC: 5 | RNVC: 9
C31445: RNCC: 5 | RNVC: 9

8 Jan 1986

5110-15-074-6100
Hand File

150746100
12INART104MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-5859
Hand File

150745859
B200UNI5489: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5891
Hand File

150745891
1-2D150UNI5492: RNCC: 2 | RNVC: 2

31 Dec 1978

5110-14-210-5443
Hand File

142105443
E75001LA150B: RNCC: 2 | RNVC: 2
0900150201: RNCC: 3 | RNVC: 2
900-150DD: RNCC: 3 | RNVC: 2
0900150204: RNCC: 3 | RNVC: 2
101-MD-150: RNCC: 3 | RNVC: 2
101DEMID0UCE150: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-15-155-4127
Ratchet Bit Brace

151554127
(241)A91351613G: RNCC: 3 | RNVC: 2
1613G: RNCC: 3 | RNVC: 2

18 Mar 2002

5110-15-221-7639
Single Bit Ax

152217639
B44004506: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-33-203-4228
Tube Cutter

332034228
8621.00300: RNCC: 3 | RNVC: 2
276.028: RNCC: 3 | RNVC: 2
8413345015189: RNCC: 5 | RNVC: 2

2 Apr 2004

5110-33-156-5805
Hand Cold Chisel

331565805
5210.030: RNCC: 3 | RNVC: 2
50112: RNCC: 3 | RNVC: 2
311.300: RNCC: 3 | RNVC: 2
8740.03000: RNCC: 5 | RNVC: 2
8740.03000: RNCC: 5 | RNVC: 2

18 Mar 1994

5110-15-214-9156
Hand Graver

152149156
3735-5-120: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-271-5882
Hand Reamer

142715882
E74111-3RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-33-103-9156
Hand Rasp

331039156
351.273: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-27-016-0362
Turning Chisel

270160362
99999-NIIN-DA0037506: RNCC: 2 | RNVC: 1

17 Dec 2002

5110-14-433-3150
Bearing Scraper

144333150
853-202-664-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5110-14-244-0900
Hand Reamer

142440900
NF E 66-003/18,5: RNCC: 2 | RNVC: 2
8040101-18,5: RNCC: 3 | RNVC: 2
E66-003-18,5: RNCC: 5 | RNVC: 2
E74104-18-5FS: RNCC: 5 | RNVC: 2
TKF8040101-18,5: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-33-205-8061
Hand Reamer

332058061
5110900006: RNCC: 3 | RNVC: 2
9742.510.4301: RNCC: 5 | RNVC: 2

10 Apr 2007

5110-33-201-6843
Paper Cutter

332016843
20700: RNCC: 3 | RNVC: 2

3 Oct 2002

5110-15-074-6528
Hand Reamer

150746528
24UNI525TAGLIENTIELICACCSUPERRA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-14-271-5890
Hand Reamer

142715890
E74111-11RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-218-4262
Hand File

142184262
E75001LC300B: RNCC: 2 | RNVC: 2
0910300201: RNCC: 3 | RNVC: 2
910-300DD: RNCC: 3 | RNVC: 2
E75-001DEMIR0NDEDEMID0UCE300: RNCC: 5 | RNVC: 2

1 Jan 1965

5110-15-074-6515
Hand Reamer

150746515
11UNI525TAGLIENTIELICACCSUPERRA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-27-015-8803
Smooth Plane

270158803
99999-NIIN-DA0037569: RNCC: 2 | RNVC: 1

17 Dec 2002

5110-14-289-5477
Hand File

142895477
9970-121-054: RNCC: 3 | RNVC: 2

1 Jan 1972

5110-15-074-6916
Firmer Chisel

150746916
30ART106: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6390
Hand Reamer

150746390
20UNI525ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-271-5963
Hand Reamer

142715963
E74111-19FS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-14-358-6825
Hand Reamer

143586825
NO PRIMARY REF14-358-6825: RNCC: 3 | RNVC: 2
408459: RNCC: 5 | RNVC: 2
408459: RNCC: 5 | RNVC: 9

7 Sep 1979

5110-33-153-3606
Hand Hacksaw Frame

331533606
1351.012: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-199-0991
Rip Hand Saw

151990991
5445/1-400: RNCC: 3 | RNVC: 2
B5445/1-400: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-33-158-6401
Bolt Cutter

331586401
4880.061: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-192-9587
Rabbet Plane

151929587
1-12-140: RNCC: 3 | RNVC: 2
3253561121401: RNCC: 3 | RNVC: 2
(241)A61541-12-140: RNCC: 5 | RNVC: 2
(241)A61543253561121401: RNCC: 5 | RNVC: 2

30 Mar 2010

5110-15-144-5102
End Cutting Nippers

151445102
1793-2: RNCC: 3 | RNVC: 2
1088-160: RNCC: 3 | RNVC: 2
3040-160: RNCC: 3 | RNVC: 2
60152416: RNCC: 3 | RNVC: 2
142097412: RNCC: 8 | RNVC: 2

11 Dec 1996

5110-15-074-7411
Hand Hacksaw Blade

150747411
13-18UNI4000ACCIAI0LAV0RAZI0NIA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-152-0443
Hand Reamer

151520443
99394017: RNCC: 3 | RNVC: 2

2 Aug 2000

5110-14-280-9745
Hand Reamer

142809745
E74108C12RS: RNCC: 2 | RNVC: 1

1 Jan 1971

5110-14-480-0404
Paper Cutter

144800404
X-ACTO: RNCC: 3 | RNVC: 2
XACTO: RNCC: 5 | RNVC: 2
F300 0T 010 1293: RNCC: 6 | RNVC: 9

21 Feb 1996

5110-27-015-8816
Turning Chisel

270158816
99999-NIIN-DA0037479: RNCC: 2 | RNVC: 1

17 Dec 2002

5110-15-199-0814
Hand File

151990814
2604/1-10: RNCC: 3 | RNVC: 2
D2604/1-10: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-157-5297
Broad Hatchet

151575297
81818: RNCC: 3 | RNVC: 2
(241)A473581818: RNCC: 4 | RNVC: 1

18 Sep 2003

5110-15-074-7049
Firmer Gouge

150747049
40ART112: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6450
Hand Reamer

150746450
22UNI525TAGLIENTIELICACCLEGUTEN-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-6622
Hand Reamer

150746622
4UNI532ACCIAI0CARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-540-8510
Chisel Bar

145408510
7106400001: RNCC: 3 | RNVC: 2
3303807106065: RNCC: 5 | RNVC: 2

23 Apr 2004

5110-15-195-9474
Hand Wire Stripper

151959474
011490010: RNCC: 3 | RNVC: 2

30 May 2011

5110-15-074-6636
Hand Reamer

150746636
5UNI532ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-203-4681
Hand Cold Chisel

332034681
8730.01500: RNCC: 3 | RNVC: 2

16 Apr 2004

5110-27-055-6805
Hand Cold Chisel

270556805
5500230200: RNCC: 5 | RNVC: 9

27 Dec 2011

5110-15-188-9747
Framing Chisel

151889747
2000072581: RNCC: 3 | RNVC: 2
(241)AA1362000072581: RNCC: 5 | RNVC: 2

11 Jan 2010

5110-14-422-5957
Doweling Jig

144225957
548446: RNCC: 3 | RNVC: 2

10 Mar 1988

5110-33-155-1297
Hand File

331551297
LIMA TRIANGULAR FINA 6": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-15-074-7430
Hand Hacksaw Blade

150747430
16-24UNI4000ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-103-9087
Hand File

331039087
350.182: RNCC: 3 | RNVC: 2

22 Jun 1995

5110-15-050-6150
Hand Rasp

150506150
B150UNI5522: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-196-6809
Hand Reamer

151966809
PN UAS 00038638: RNCC: 3 | RNVC: 2
3416F76032719: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-197-0494
Hand Wire Stripper

151970494
PN UAS 00039810: RNCC: 3 | RNVC: 2
5120F76033845: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-228-9947
Hand Reamer

142289947
E74104-7RN: RNCC: 2 | RNVC: 2
3088-7: RNCC: 3 | RNVC: 9

1 Jan 1966

5110-15-001-2342
Hand Post Drill

150012342
0586: RNCC: 3 | RNVC: 2
0586: RNCC: 3 | RNVC: 9

4 Jun 2013

5110-15-054-1373
Bow Saw

150541373
5570-900: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-199-0808
Hand File

151990808
2603/3-8: RNCC: 3 | RNVC: 2
D2603/3-8: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-207-8178
Corner Bit Brace

152078178
TK10463: RNCC: 3 | RNVC: 2
(241)A4444TK10463: RNCC: 5 | RNVC: 2

20 Nov 2012

5110-15-196-8792
Ratchet Drill

151968792
PN UAS 00041527: RNCC: 3 | RNVC: 2
2540F76034804: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-555-3401
Scraper Blade

145553401
35 80 31: RNCC: 3 | RNVC: 2

29 Oct 2007

5110-14-393-3034
Hand Wire Stripper

143933034
K0385-9036172: RNCC: 3 | RNVC: 2
5-1881D43127-144: RNCC: 3 | RNVC: 2
K0385-591D: RNCC: 5 | RNVC: 2

7 Apr 1984

5110-15-117-2145
Hand Cable Stripper

151172145
T6-45-121: RNCC: 3 | RNVC: 2
464899037: RNCC: 5 | RNVC: 2

8 Sep 1993

5110-27-000-8006
Hand Cold Chisel

270008006
5500 20 0300: RNCC: 3 | RNVC: 2

23 Oct 1990

5110-14-273-7472
Hand Reamer

142737472
E74103-14RS: RNCC: 2 | RNVC: 2
D6600.140: RNCC: 3 | RNVC: 2
8040021-14: RNCC: 3 | RNVC: 2
703CY14: RNCC: 3 | RNVC: 2
R603-14: RNCC: 3 | RNVC: 2
SYQ1797: RNCC: 5 | RNVC: 2
F1111-14: RNCC: 5 | RNVC: 2
166-14: RNCC: 5 | RNVC: 2
1080-14: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-074-6848
Hand Cold Chisel

150746848
200-22ART32650: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-103-9143
Hand Rasp

331039143
351.171: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-154-4936
Single Bit Ax

151544936
A1001934: RNCC: 3 | RNVC: 2

20 Jun 2001

5110-33-005-4321
Hand File

330054321
4073 16CM. BASTA: RNCC: 3 | RNVC: 2
446104: RNCC: 5 | RNVC: 2

25 Jul 2001

5110-15-074-6882
Hand Cold Chisel

150746882
100-22A25FIG24: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6710
Hand Reamer

150746710
29UNI538ACCIAI0CARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-371-9162
Hand File

143719162
E75001LG400A: RNCC: 2 | RNVC: 2
913-400B: RNCC: 3 | RNVC: 2

5 Aug 1981

5110-15-074-6509
Hand Reamer

150746509
5UNI525TAGLIENTIELICACCSUPERRAP-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-7415
Hand Hacksaw Blade

150747415
16-18UNI4000ACCIAI0LAV0RAZI0NIA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-5934
Hand File

150745934
1-1-2D160UNI5669: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-394-4116
Hand File

143944116
BARMD150: RNCC: 3 | RNVC: 2
3148516066206: RNCC: 5 | RNVC: 2

28 Aug 1984

5110-15-074-5823
Hand File

150745823
1-2D350UNI5493: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-195-9500
Hand File

151959500
017190060: RNCC: 3 | RNVC: 2

30 May 2011

5110-14-201-3116
Miter Box

142013116
4489-40: RNCC: 3 | RNVC: 2
141-145-40: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-280-8761
Hand Hacksaw Frame

142808761
606A: RNCC: 3 | RNVC: 2
3148511885024: RNCC: 5 | RNVC: 2
0188502: RNCC: 5 | RNVC: 9
606: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-271-6023
Hand File

142716023
E75001LB250C: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-194-5096
Hand Drill

151945096
HP 1620 650: RNCC: 3 | RNVC: 2
(241)A4155HP1620650: RNCC: 5 | RNVC: 2

29 Nov 2010

5110-14-202-4593
Hand Rasp

142024593
E75001RF200: RNCC: 2 | RNVC: 1

1 Jan 1963

5110-15-052-4060
Hand Rasp

150524060
400UNI5526: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-33-103-9249
Hand Rasp

331039249
361.432: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-123-7120
Bolt Cutter

151237120
1880-910: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-33-103-9238
Hand Rasp

331039238
361.162: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-339-3449
Hand Rasp

143393449
E75001RB200A: RNCC: 2 | RNVC: 2

18 Jan 1977

5110-15-075-0830
Hand File

150750830
6D180VNI5670A: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-271-6060
Hand File

142716060
E75001LH150A: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-271-5921
Hand Reamer

142715921
E74111-17-5RS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-14-447-1340
Dimpling Punch

144471340
851-910-114-6: RNCC: 3 | RNVC: 2

3 May 1991

5110-15-074-7061
Firmer Gouge

150747061
24ART113: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-180-2699
Hand File

151802699
(241)A08731718A8/M: RNCC: 3 | RNVC: 2
1718A8/M: RNCC: 3 | RNVC: 2

7 Apr 2008

5110-15-009-8664
Hand File

150098664
2561/2/4: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-14-271-5950
Hand Reamer

142715950
E74111-9-5FS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-14-464-2453
Hand Cape Chisel

144642453
854-500-357-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5110-15-020-1415
Craftsman's Knife

150201415
13-006A04: RNCC: 3 | RNVC: 2
55.57.007.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5110-14-530-2007
Hand File

145302007
AIG.CT140T2: RNCC: 3 | RNVC: 2
3148516314802: RNCC: 5 | RNVC: 2

22 May 2002

5110-14-429-4138
Hand Post Drill

144294138
NO PRIMARY REF14-429-4138: RNCC: 3 | RNVC: 2
3250041: RNCC: 5 | RNVC: 9
TECHNO003: RNCC: 5 | RNVC: 9
277: RNCC: 5 | RNVC: 9

20 Jan 1989

5110-14-337-4003
Hand Reamer

143374003
613-29A34: RNCC: 3 | RNVC: 9
85-688-4643: RNCC: 6 | RNVC: 9

7 Oct 1976

5110-27-028-4727
Pipe Cutter

270284727
923120: RNCC: 2 | RNVC: 1
923120: RNCC: 2 | RNVC: 1

4 Jan 2006

5110-14-244-0675
Hand Reamer

142440675
E74112-6,5: RNCC: 2 | RNVC: 2
20020-6,5: RNCC: 3 | RNVC: 2
R601-6,5: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-14-273-7481
Hand Reamer

142737481
E74103-23RS: RNCC: 2 | RNVC: 2
R603-23: RNCC: 3 | RNVC: 2
166-23: RNCC: 3 | RNVC: 2
1080-23: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-074-6177
Hand File

150746177
16-107MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-429-3063
Hand Reamer

144293063
853-600-071-0: RNCC: 3 | RNVC: 2

11 Jan 1989

5110-14-294-0781
Hand Hacksaw Frame

142940781
2727-1: RNCC: 3 | RNVC: 2
1758: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-15-074-6696
Hand Reamer

150746696
5-15UNI535ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-009-8732
Hand File

150098732
2561/1/1: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-14-274-8303
Hand File

142748303
2407-180-4: RNCC: 3 | RNVC: 2
4477-180-4: RNCC: 3 | RNVC: 2
507-2-180: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-15-199-0807
Hand File

151990807
2603/2-10: RNCC: 3 | RNVC: 2
D2603/2-10: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-274-8068
Hand File

142748068
2403-140-0: RNCC: 3 | RNVC: 2
688-140-0: RNCC: 5 | RNVC: 2
FDSB140: RNCC: 5 | RNVC: 2
SYQ0071: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-14-249-9389
Hand Reamer

142499389
E66003A10-5HS: RNCC: 2 | RNVC: 2
3088-10-5: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-15-009-8665
Hand File

150098665
2565/2/4: RNCC: 3 | RNVC: 2

1 Mar 1981

5110-15-068-3931
Hand Reamer

150683931
12000-18: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-14-375-3662
Hand Wire Stripper

143753662
194-12: RNCC: 3 | RNVC: 2
194.12: RNCC: 5 | RNVC: 2
3148511449905: RNCC: 5 | RNVC: 2
MO000700: RNCC: 6 | RNVC: 9

26 Feb 1982

5110-14-411-5065
Hand Reamer

144115065
E66011-3JUIL1976HSS: RNCC: 2 | RNVC: 2
176-01-3: RNCC: 3 | RNVC: 2

6 Aug 1986

5110-14-383-8667
Hand Reamer

143838667
E74112-41-5RS: RNCC: 2 | RNVC: 2
F-P-41,5: RNCC: 3 | RNVC: 2
F-P-41-5: RNCC: 3 | RNVC: 2
164-41-5: RNCC: 3 | RNVC: 2

11 Apr 1983

5110-14-274-8363
Hand File

142748363
E75-002FENDANTE200D0UCE: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-15-074-6221
Hand Rasp

150746221
1-2D250UNI5521: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6680
Hand Reamer

150746680
5-15UNI535ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6564
Hand Reamer

150746564
0-8UNI524ACCALCARBSPECPERUTENS: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-530-2010
Hand File

145302010
RD.B350: RNCC: 3 | RNVC: 2

22 May 2002

5110-14-271-6052
Hand File

142716052
E75001LG300B: RNCC: 2 | RNVC: 2
0913300201: RNCC: 3 | RNVC: 2
913-300DD: RNCC: 3 | RNVC: 2
0913300204: RNCC: 3 | RNVC: 2
111-MD-300: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-33-155-1295
Hand File

331551295
LIMA TIANG. SIERRA CINTA 10": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-14-444-9002
Ladies' Scissors

144449002
841.1: RNCC: 3 | RNVC: 2
3148512069430: RNCC: 5 | RNVC: 2
0110613S00: RNCC: 5 | RNVC: 2
91639877: RNCC: 5 | RNVC: 2
0206943: RNCC: 5 | RNVC: 9

28 Jan 1991

5110-14-244-0638
Hand Reamer

142440638
E66012A8RS: RNCC: 2 | RNVC: 2

1 Jan 1968

5110-15-074-6067
Hand File

150746067
16INART101BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6208
Hand Rasp

150746208
B400UNI5523: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-540-8534
Firmer Chisel

145408534
7011180201: RNCC: 3 | RNVC: 2
3303807011154: RNCC: 5 | RNVC: 2

23 Apr 2004

5110-14-338-3819
Keyhole Saw

143383819
SCIEAGUICHETP0URSTATIFIES: RNCC: 3 | RNVC: 2

6 Nov 1976

5110-14-540-8783
Miter Box

145408783
786 P 3: RNCC: 3 | RNVC: 2

29 Apr 2004

5110-15-074-6090
Hand File

150746090
12INART102D0LCEB: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6716
Hand Reamer

150746716
20UNI538ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6904
Hand Masonry Drill

150746904
400-15ART734: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-050-9082
Hand File

150509082
1-2D125VN15515B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-159-3189
Ladies' Scissors

151593189
PN UAS 00048414: RNCC: 3 | RNVC: 2
7360F76039404: RNCC: 5 | RNVC: 9

31 Mar 2004

5110-14-264-8260
Hardy

142648260
651-45: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-15-196-9887
Hand File

151969887
PN UAS 00025766: RNCC: 3 | RNVC: 2
5110F76011917: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-219-2665
Keyhole Saw

152192665
2825068: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-055-3614
Hand File

150553614
1-2D175UNI5487B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-530-2009
Hand File

145302009
AIG.PAMBR140T2: RNCC: 3 | RNVC: 2
3148516316707: RNCC: 5 | RNVC: 2

22 May 2002

5110-14-361-8731
Hand Wire Stripper

143618731
525307: RNCC: 3 | RNVC: 2

20 Feb 1980

5110-15-054-1365
Crosscut Hand Saw

150541365
4702-600: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-074-5944
Hand File

150745944
41-2D140UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-204-2706
Knife Blade

152042706
OMP-HUT-027: RNCC: 3 | RNVC: 2
(241)AE591OMP-HUT-027: RNCC: 5 | RNVC: 2

13 Oct 2011

5110-14-273-7499
Hand Reamer

142737499
E74103-50RS: RNCC: 2 | RNVC: 2
1080-50: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-228-1359
Hand Reamer

142281359
3088-5: RNCC: 3 | RNVC: 2

1 Jan 1966

5110-15-054-2495
Hand Bench Shears

150542495
2062-5: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-33-103-9246
Hand Rasp

331039246
361.353: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-054-2303
Hatchet Handle

150542303
56-6-351: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-33-103-9098
Hand File

331039098
350.261: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-14-464-4955
Hand Reamer

144644955
854-600-021-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5110-14-283-3927
Coping Saw

142833927
9970-121-052: RNCC: 3 | RNVC: 2

1 Jan 1972

5110-14-488-5395
Hand Reamer

144885395
E66003-7-6RS: RNCC: 2 | RNVC: 2
EXP-QC-TD-7,6: RNCC: 3 | RNVC: 2
168-7,6: RNCC: 3 | RNVC: 2
EXPQCTD7-6: RNCC: 5 | RNVC: 2
168-7-6: RNCC: 5 | RNVC: 2

20 May 1997

5110-14-497-2762
Bolt Cutter

144972762
C345-0: RNCC: 3 | RNVC: 2
F300 0T 022 9302: RNCC: 6 | RNVC: 9

15 Oct 1997

5110-14-201-5502
Bolt Cutter

142015502
158-3: RNCC: 3 | RNVC: 2
4303-3: RNCC: 3 | RNVC: 2
450-880: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-14-204-8343
Hand File

142048343
E75001LG250C: RNCC: 2 | RNVC: 2
913-250D: RNCC: 3 | RNVC: 2
0913250301: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-15-074-5912
Hand File

150745912
1-2D200UNI5495: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-274-8074
Hand File

142748074
2405-140-2: RNCC: 3 | RNVC: 2
504-0-140: RNCC: 3 | RNVC: 2
690-140-2: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-15-054-1400
Dovetail Saw

150541400
4720-200: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-054-2299
Broad Hatchet

150542299
56-6-229: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-074-5882
Hand File

150745882
B125UNI5492B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5994
Hand File

150745994
100UNI5517: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-464-4952
Hand Reamer

144644952
854-600-018-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5110-15-074-5840
Hand File

150745840
B400UNI5494B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-199-0984
Firmer Gouge

151990984
6059-14: RNCC: 3 | RNVC: 2
B6059-14: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-41-001-5859
Enclosed Blade Tube Deburring Tool

410015859
1133-021: RNCC: 3 | RNVC: 2

15 Oct 2010

5110-14-460-1641
Hand Reamer

144601641
E66003A29-5HS: RNCC: 2 | RNVC: 2

13 Jan 1993

5110-14-437-7128
Hand Reamer

144377128
E74112-22-5RS: RNCC: 2 | RNVC: 2
F-P-22,5: RNCC: 3 | RNVC: 2
164-22,5: RNCC: 3 | RNVC: 2

14 Feb 1990

5110-14-210-5454
Hand File

142105454
E75001LG150C: RNCC: 2 | RNVC: 2
0913150301: RNCC: 3 | RNVC: 2
913-150D: RNCC: 3 | RNVC: 2
0913150304: RNCC: 3 | RNVC: 2
111-DX-150: RNCC: 3 | RNVC: 2

1 Jan 1964

5110-27-048-4521
Scraper Blade

270484521
YJ.2000.30: RNCC: 2 | RNVC: 1

10 Feb 2010

5110-15-197-1649
Single Bit Ax

151971649
PN UAS 00030315: RNCC: 3 | RNVC: 2
5110F76027668: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-401-5206
Hand File

144015206
CAR.MD200: RNCC: 3 | RNVC: 2
3148516031600: RNCC: 5 | RNVC: 2
CARMD200: RNCC: 5 | RNVC: 2
91633085: RNCC: 5 | RNVC: 2
0603160: RNCC: 5 | RNVC: 9

13 Jun 1985

5110-27-024-5935
Adz

270245935
05001FK0218: RNCC: 2 | RNVC: 1

13 Nov 2004

5110-14-276-3231
Tailor's Shears

142763231
230: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-14-464-9034
Hand Cold Chisel

144649034
851-912-046-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5110-15-197-1273
Chisel Bar

151971273
PN UAS 00043643: RNCC: 3 | RNVC: 2
5120F76035892: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-33-103-9256
Hand File

331039256
362.652: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-074-5925
Hand File

150745925
1-2D150UNI5498: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6626
Hand Reamer

150746626
10UNI532ACCIAI0CARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-055-3637
Hand File

150553637
140UNI5515B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-057-5467
End Cutting Nippers

150575467
LI2450-00: RNCC: 3 | RNVC: 2
1376-97-279: RNCC: 5 | RNVC: 2
137697279: RNCC: 5 | RNVC: 2

31 Dec 1975

5110-14-280-9747
Hand Reamer

142809747
E74108C14RS: RNCC: 2 | RNVC: 1

1 Jan 1971

5110-15-196-9882
Hand File

151969882
PN UAS 00016731: RNCC: 3 | RNVC: 2
5110F76025101: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-33-105-8801
Hand Rasp

331058801
454406: RNCC: 3 | RNVC: 2

19 Nov 1997

5110-15-101-2168
Hand Wire Stripper

151012168
146: RNCC: 3 | RNVC: 2

15 May 1987

5110-15-074-6953
Firmer Chisel

150746953
14ART109: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-271-6046
Hand File

142716046
E75001LE350A: RNCC: 2 | RNVC: 2
112-BAT-350: RNCC: 3 | RNVC: 2
912-350B: RNCC: 3 | RNVC: 2
0912350104: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-15-074-6301
Hand Reamer

150746301
7UNI525ACCLEGUTENS: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6180
Hand File

150746180
12-107D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-27-013-3500
Hand File Set

270133500
10131KE0009: RNCC: 2 | RNVC: 1

5 Jun 2002

5110-15-199-3375
Pipe Cutter

151993375
99387050: RNCC: 3 | RNVC: 2
(241)A424999387050: RNCC: 5 | RNVC: 2

6 Mar 2005

5110-14-408-6763
Single Bit Ax

144086763
103876: RNCC: 3 | RNVC: 2

29 Jan 1997

5110-14-200-8652
Hand Rasp

142008652
E75001RC250A: RNCC: 2 | RNVC: 2

1 Jan 1962

5110-33-155-1106
Hand File

331551106
LIMA CUADRADA S/FINA 12": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-14-204-8342
Hand File

142048342
E75001LG300A: RNCC: 2 | RNVC: 2
CAR.B300: RNCC: 3 | RNVC: 2
0913300101: RNCC: 3 | RNVC: 2
913-300B: RNCC: 3 | RNVC: 2
102012: RNCC: 5 | RNVC: 2
131016: RNCC: 5 | RNVC: 2
3148516029508: RNCC: 5 | RNVC: 2
CARB300: RNCC: 5 | RNVC: 2
0602950: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-15-074-6865
Hand Cold Chisel

150746865
130-11ART362UC10: RNCC: 3 | RNVC: 2
130-11ART362UC100UNI2955: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-204-8348
Hand File

142048348
E75001LA400A: RNCC: 2 | RNVC: 2
0900400101: RNCC: 3 | RNVC: 2
900-400B: RNCC: 3 | RNVC: 2
0900400104: RNCC: 3 | RNVC: 2
101-BA-400: RNCC: 3 | RNVC: 2
PAM B 400: RNCC: 5 | RNVC: 2
101BATARDE400: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-14-274-8069
Hand File

142748069
2401-140-2: RNCC: 3 | RNVC: 2
680-140-2: RNCC: 5 | RNVC: 2
PM140: RNCC: 5 | RNVC: 2
SYQ0905: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-27-000-8161
Bolt Cutter

270008161
2350 16 0014: RNCC: 3 | RNVC: 2

11 Jun 1991

5110-14-488-5318
Hand Reamer

144885318
F-P-12D10: RNCC: 3 | RNVC: 2
FP12D10: RNCC: 5 | RNVC: 2

15 May 1997

5110-33-155-1298
Hand File

331551298
LIMA TRIANGULAR FINA 8": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-15-005-9796
Pliers

150059796
709300 455: RNCC: 3 | RNVC: 2
(241)A0019709300 455: RNCC: 5 | RNVC: 2

11 Dec 2013

5110-33-103-9183
Hand File

331039183
352.812: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-33-103-9066
Hand File

331039066
350.071: RNCC: 3 | RNVC: 2

21 Jun 1995

5110-15-205-9866
Chisel Bar

152059866
4.11: RNCC: 3 | RNVC: 2
(241)A81704.11: RNCC: 5 | RNVC: 2

27 Apr 2012

5110-14-549-4289
Hand File

145494289
AIG.TRI180T2: RNCC: 3 | RNVC: 2

3 Apr 2006

5110-33-203-3152
Hand File

332033152
513210: RNCC: 3 | RNVC: 2

26 Feb 2004

5110-14-418-1688
Hand File

144181688
AIGDRD100T2: RNCC: 3 | RNVC: 2
3148516310408: RNCC: 5 | RNVC: 2

6 Aug 1987

5110-15-054-1360
Crosscut Hand Saw

150541360
4700-300: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-449-0819
Hand File

144490819
0900250204: RNCC: 3 | RNVC: 2
101-MD-250: RNCC: 3 | RNVC: 2

24 Jul 1991

5110-15-196-6817
Hand Reamer

151966817
PN UAS 00013845: RNCC: 3 | RNVC: 2
5133F76022609: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-409-7791
Scraper Blade

144097791
NO PRIMARY REF14-409-7791: RNCC: 3 | RNVC: 2
96: RNCC: 5 | RNVC: 9

28 May 1986

5110-15-074-6150
Hand File

150746150
12-105D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-273-7564
Hand Reamer

142737564
E74108-5RS: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-15-055-3593
Turning Gouge

150553593
6064-25: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-449-0827
Hand Rasp

144490827
0941250204: RNCC: 3 | RNVC: 2
302-MP-250: RNCC: 3 | RNVC: 2

24 Jul 1991

5110-15-054-1401
Dovetail Saw

150541401
4720-300: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-074-6455
Hand Reamer

150746455
28UNI525TAGLIENTIELICACCLEGUTEN-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-6284
Hand Reamer

150746284
30UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-003-6149
Hand File

330036149
414905: RNCC: 3 | RNVC: 2

25 May 1998

5110-15-074-6661
Hand Reamer

150746661
4UNI532ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-179-6235
Paper Cutter

151796235
A-1001: RNCC: 3 | RNVC: 2

7 Jun 2007

5110-15-137-4523
End Cutting Nippers

151374523
567GS: RNCC: 3 | RNVC: 2
567GS: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-068-3928
Hand Reamer

150683928
12000-15: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-15-074-7045
Firmer Gouge

150747045
28ART112: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-155-1120
Hand File

331551120
LIMA PLANA PUNTA S/FINA 10": RNCC: 3 | RNVC: 2

29 Jun 1996

5110-15-074-6085
Hand File

150746085
12INART102MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-103-9061
Hand File

331039061
350.052: RNCC: 3 | RNVC: 2

21 Jun 1995

5110-15-197-6302
Paper Cutter

151976302
PN UAS 00001511: RNCC: 3 | RNVC: 2
9999F76014050: RNCC: 5 | RNVC: 9

8 Apr 2004

5110-15-074-6589
Hand Reamer

150746589
2-5UNI524ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-196-6814
Hand Reamer

151966814
PN UAS 00013846: RNCC: 3 | RNVC: 2
5133F76022610: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-074-7416
Hand Hacksaw Blade

150747416
16-24UNI4000ACCIAI0CAV0RAZI0WIA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-6249
Hand Rasp

150746249
B400UNI5522: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-196-9866
Hand File

151969866
PN UAS 00038495: RNCC: 3 | RNVC: 2
5110F76032638: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-179-5861
Bow Saw

151795861
15-530: RNCC: 3 | RNVC: 2

11 Apr 2007

5110-14-540-8530
Firmer Chisel

145408530
7011100201: RNCC: 3 | RNVC: 2
3303807011055: RNCC: 5 | RNVC: 2

23 Apr 2004

5110-14-409-2406
Hand File

144092406
PAM.MD150: RNCC: 3 | RNVC: 2
3148516004505: RNCC: 5 | RNVC: 2
PAMMD150: RNCC: 5 | RNVC: 2
91566648: RNCC: 5 | RNVC: 2
0714 61 05: RNCC: 5 | RNVC: 2
0600450: RNCC: 5 | RNVC: 9

6 May 1986

5110-14-308-1189
Hand Reamer

143081189
C46661: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-475-4626
Banana Knife

144754626
994058: RNCC: 3 | RNVC: 2

7 Apr 1995

5110-14-541-3254
Hand Rasp

145413254
RAB.PMD250: RNCC: 3 | RNVC: 2

27 May 2004

5110-14-476-8760
Hand Wire Stripper

144768760
AUT0406R00A: RNCC: 3 | RNVC: 2

5 Jul 1995

5110-33-155-9494
Hand Graver

331559494
313.300: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-27-043-7682
Hand Drill

270437682
KD960 KC: RNCC: 2 | RNVC: 1

15 Dec 2008

5110-14-274-8374
Hand File

142748374
645-250: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-15-020-1416
Crosscut Hand Saw

150201416
13-004A01: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-218-4258
Hand File

142184258
E75001LF300A: RNCC: 2 | RNVC: 2
0914300101: RNCC: 3 | RNVC: 2
914-300B: RNCC: 3 | RNVC: 2
0914300104: RNCC: 3 | RNVC: 2
110-BAT-300: RNCC: 3 | RNVC: 2
130040: RNCC: 5 | RNVC: 2

1 Jan 1965

5110-15-197-1703
Poising Saw

151971703
PN UAS 00013261: RNCC: 3 | RNVC: 2
3405F76019321: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-074-3291
Hand File

150743291
1-2D350UNI5488: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-427-1127
Hand Reamer

144271127
530703: RNCC: 3 | RNVC: 2

6 Oct 1988

5110-33-204-3387
File Holder

332043387
369.100: RNCC: 3 | RNVC: 2

6 Jul 2005

5110-15-003-7823
Hand Drill

150037823
2S1310: RNCC: 3 | RNVC: 2
(241)A00192S1310: RNCC: 5 | RNVC: 2

25 Nov 2013

5110-15-074-5889
Hand File

150745889
1-2D100UNI5492: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-204-1150
Doweling Jig

332041150
U4-AYC1138-1002: RNCC: 3 | RNVC: 2

31 Mar 2005

5110-15-000-2792
Hand File

150002792
S2300GH: RNCC: 3 | RNVC: 2

14 Feb 2013

5110-14-202-0394
Hand Hacksaw Frame

142020394
60: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-15-074-6602
Hand Reamer

150746602
2UNI531ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-155-9489
Hand Graver

331559489
DIN 6453: RNCC: 2 | RNVC: 2
5212.020: RNCC: 3 | RNVC: 2
50508: RNCC: 3 | RNVC: 2
312.200: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-15-074-6319
Hand Reamer

150746319
25UNI525ACCLEGUTENS: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-003-6151
Hand File

330036151
418606: RNCC: 3 | RNVC: 2

25 May 1998

5110-33-103-9077
Hand File

331039077
350.151: RNCC: 3 | RNVC: 2

22 Jun 1995

5110-15-074-6868
Hand Cold Chisel

150746868
180-19ART362UC100UNI2955: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-103-9200
Hand File

331039200
360.032: RNCC: 3 | RNVC: 2

13 Dec 1996

5110-15-074-6681
Hand Reamer

150746681
10-25UNI535ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-430-1028
Bolt Cutter

144301028
0219607: RNCC: 3 | RNVC: 2
998.A3: RNCC: 5 | RNVC: 2
998A3: RNCC: 5 | RNVC: 2

1 Mar 1989

5110-15-074-6872
Hand Cape Chisel

150746872
180-9ART364UC100UNI2955: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-005-4322
Hand File

330054322
4073 16CM. FINA: RNCC: 3 | RNVC: 2
446708: RNCC: 5 | RNVC: 2

25 Jul 2001

5110-14-266-4652
Single Bit Ax

142664652
20502: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-33-103-9207
Hand File

331039207
360.131: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-074-6328
Hand Reamer

150746328
40UNI525ACCLEGUT: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-431-7316
Hand Graver

144317316
05576045: RNCC: 3 | RNVC: 2

9 May 1989

5110-15-074-6956
Firmer Chisel

150746956
18ART109: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-154-4942
Bolt Cutter

151544942
A1001942: RNCC: 3 | RNVC: 2

20 Jun 2001

5110-33-201-9862
Hand Hacksaw Frame

332019862
1377.012: RNCC: 3 | RNVC: 2

5 Dec 2002

5110-15-074-6732
Hand Reamer

150746732
14UNI538ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-024-1899
Half Hatchet

270241899
05001FB0093: RNCC: 2 | RNVC: 1

28 Sep 2004

5110-15-007-3010
Pipe Cutter

150073010
2411-1-2: RNCC: 3 | RNVC: 2

16 Mar 1980

5110-33-103-9121
Hand File

331039121
350.473: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-14-285-4790
Jeweler's Saw Blade

142854790
NO PRIMARY REF14-285-4790: RNCC: 3 | RNVC: 2
M3: RNCC: 5 | RNVC: 2

1 Jan 1972

5110-14-272-3616
Hand Cape Chisel

142723616
0160420: RNCC: 3 | RNVC: 2
254-10: RNCC: 5 | RNVC: 2
254.10: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-14-273-7569
Hand Reamer

142737569
E74108-10RS: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-14-520-9805
Pocket Knife

145209805
NT4120: RNCC: 3 | RNVC: 2
0-29600-00000-89: RNCC: 3 | RNVC: 2
991026: RNCC: 5 | RNVC: 2
HS051042: RNCC: 5 | RNVC: 2
COUTEAU CRAN D'ARRET TAP SURVIE: RNCC: 5 | RNVC: 9

28 Jun 2000

5110-33-156-5941
Hand Wire Stripper

331565941
612.660: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-14-274-8078
Hand File

142748078
2403-140-2: RNCC: 3 | RNVC: 2
688-140-2: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-33-106-9730
Hand File

331069730
BL 4002-250: RNCC: 3 | RNVC: 2

3 Jun 1999

5110-14-433-1292
Hand Wire Stripper

144331292
NO PRIMARY REF14-433-1292: RNCC: 3 | RNVC: 2
0140120: RNCC: 5 | RNVC: 2
172A: RNCC: 5 | RNVC: 2
91368757: RNCC: 5 | RNVC: 2

11 Jul 1989

5110-14-270-3987
Hand Reamer

142703987
E66003-30RS: RNCC: 2 | RNVC: 2
EXP-QC-TD-30: RNCC: 3 | RNVC: 2
168-30: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-33-155-1306
Hand File

331551306
LIMA TRIANGULAR S/FINA 12": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-15-197-0497
Hand Wire Stripper

151970497
PN UAS 00027373: RNCC: 3 | RNVC: 2
5120F76019253: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-33-155-1101
Hand File

331551101
LIMA CUADRADA BASTA 8": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-33-103-9120
Hand File

331039120
905.01220: RNCC: 3 | RNVC: 2
350.472: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-15-107-2960
Hand File

151072960
62321-30/002: RNCC: 3 | RNVC: 2

10 May 1988

5110-14-506-7874
Dimpling Die

145067874
009420080P: RNCC: 3 | RNVC: 2

18 May 1998

5110-14-273-7475
Hand Reamer

142737475
E74103-17RS: RNCC: 2 | RNVC: 2
R603-17: RNCC: 3 | RNVC: 2
D6600.170: RNCC: 3 | RNVC: 2
8040021-17: RNCC: 3 | RNVC: 2
703CY17: RNCC: 3 | RNVC: 2
SYQ1800: RNCC: 5 | RNVC: 2
166-17: RNCC: 5 | RNVC: 2
F1111-17: RNCC: 5 | RNVC: 2
1080-17: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-074-6521
Hand Reamer

150746521
17UNI525TAGLIENTIELICACCSUPERRA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-27-000-8002
Hand Cold Chisel

270008002
5500 20 0150: RNCC: 3 | RNVC: 2

23 Oct 1990

5110-33-103-9236
Hand Rasp

331039236
361.132: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-33-155-1109
Hand File

331551109
LIMA CUADRADA SEMI-FINA 7": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-14-344-5305
Hand File

143445305
C90985: RNCC: 3 | RNVC: 2
85-689-4240: RNCC: 6 | RNVC: 9

10 Aug 1977

5110-27-018-8531
Corner Bit Brace

270188531
901-DC-43: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-460-4319
Knife Blade

144604319
G-379-35: RNCC: 3 | RNVC: 2
G379-35: RNCC: 3 | RNVC: 2
3272670025554: RNCC: 5 | RNVC: 2

25 Jan 1993

5110-14-271-5920
Hand Reamer

142715920
E74111-17RS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-14-204-9187
Rip Hand Saw

142049187
4566-40: RNCC: 3 | RNVC: 2
311-40: RNCC: 5 | RNVC: 2
2600-40: RNCC: 5 | RNVC: 9
B410A40GOLDENBERG: RNCC: 5 | RNVC: 9
496-40: RNCC: 5 | RNVC: 9
311-40: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-15-055-9176
Hand Wire Stripper

150559176
145B8: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6879
Hand Cape Chisel

150746879
165-6ART364: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-344-5588
Riffler

143445588
8812036000: RNCC: 3 | RNVC: 2

10 Aug 1977

5110-15-000-2789
Hand File

150002789
S2300GD: RNCC: 3 | RNVC: 2

14 Feb 2013

5110-14-553-1784
Bearing Scraper

145531784
JF 0300: RNCC: 3 | RNVC: 2

12 Mar 2007

5110-27-016-2258
Hand Wire Stripper

270162258
3750462160: RNCC: 2 | RNVC: 1
E25-13-0160: RNCC: 2 | RNVC: 1
3750462160: RNCC: 5 | RNVC: 9
3750462160: RNCC: 5 | RNVC: 9

17 Dec 2002

5110-27-000-8003
Hand Cold Chisel

270008003
5500 20 0175: RNCC: 3 | RNVC: 2

23 Oct 1990

5110-33-211-2747
Pocket Knife

332112747
1990-85: RNCC: 3 | RNVC: 2
8413093199001: RNCC: 5 | RNVC: 2

4 Aug 2013

5110-14-274-8306
Hand File

142748306
2411-180-4: RNCC: 3 | RNVC: 2
4480-180-4: RNCC: 3 | RNVC: 2
511-2-180: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-27-015-8889
Turning Chisel

270158889
99999-NIIN-DA0030040: RNCC: 2 | RNVC: 1

17 Dec 2002

5110-14-273-7571
Hand Reamer

142737571
E74108-16RS: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-15-074-6728
Hand Reamer

150746728
29UNI538ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-053-1617
Hand Hacksaw Frame

270531617
05890 50 830: RNCC: 2 | RNVC: 1

4 Apr 2011

5110-14-285-4366
Corner Bit Brace

142854366
JBA07-26: RNCC: 3 | RNVC: 2
JBA07-62: RNCC: 3 | RNVC: 2

1 Jan 1972

5110-14-540-8360
Miter Box

145408360
480602: RNCC: 3 | RNVC: 2

23 Apr 2004

5110-15-074-5864
Hand File

150745864
B450UNI5489B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6275
Hand Reamer

150746275
19UNI525ACCCARBSPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-395-8912
Pocket Knife

143958912
OPINEL 12VRN: RNCC: 3 | RNVC: 2

30 Oct 1984

5110-14-449-0828
Hand Rasp

144490828
0942250204: RNCC: 3 | RNVC: 2
304-MP-250: RNCC: 3 | RNVC: 2

24 Jul 1991

5110-14-270-3983
Hand Reamer

142703983
E66003-20RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-197-1686
Nested Saws

151971686
PN UAS 00047431: RNCC: 3 | RNVC: 2
3405F76039030: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-201-5295
Hand Rasp

142015295
E75001RB250B: RNCC: 2 | RNVC: 2
0941250304: RNCC: 3 | RNVC: 2
302-FP-250: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-14-271-5887
Hand Reamer

142715887
E74111-8RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-411-5066
Hand Reamer

144115066
E66011-4JUIL1976HSS: RNCC: 2 | RNVC: 2
176-01-4: RNCC: 3 | RNVC: 2

6 Aug 1986

5110-14-298-5475
Hand Hacksaw Blade

142985475
E73-072-300X13X0-65X1-4S0UPLEHSS: RNCC: 2 | RNVC: 2
3805-8: RNCC: 3 | RNVC: 2
4355-8: RNCC: 3 | RNVC: 9
ULTRAMAJ0R300-8: RNCC: 3 | RNVC: 9
E73-071-300X13X0-65X1-2S0UPLE: RNCC: 5 | RNVC: 2
E73-071-300X13X0-65X1-4S0UPLEHSS: RNCC: 5 | RNVC: 2
352LI0N8: RNCC: 5 | RNVC: 2
352-8: RNCC: 5 | RNVC: 9
DEMULTRAMAJ0R300-8: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-15-050-6215
Hand File

150506215
B250UNI5495A: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-050-6063
Hand File

150506063
1-2D200UNI5502B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-074-6251
Hand Rasp

150746251
1-2D250UNI5522PIATTA: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-155-1294
Hand File

331551294
LIMA TRIANG. S/FINA SIERRA 8": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-15-074-7060
Firmer Gouge

150747060
22ART113: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-279-6913
Hand Wire Stripper

142796913
173: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-14-379-1245
Hand Reamer

143791245
14231-42836: RNCC: 3 | RNVC: 2

6 Sep 1982

5110-15-101-2111
File Handle

151012111
2637 M: RNCC: 3 | RNVC: 2

15 May 1987

5110-15-199-0988
Firmer Chisel

151990988
6055/1-22: RNCC: 3 | RNVC: 2
B6055/1-22: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-074-5932
Hand File

150745932
1-1-2D140UNI5669: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6733
Hand Reamer

150746733
17UNI538ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-433-6284
Circle Cutter

144336284
6254-57620: RNCC: 3 | RNVC: 2

2 Aug 1989

5110-14-201-7249
Hand Reamer

142017249
E74104-200RN: RNCC: 2 | RNVC: 2

1 Jan 1962

5110-14-340-8212
Circle Cutter

143408212
404-800: RNCC: 3 | RNVC: 2

14 Feb 1977

5110-15-074-6949
Firmer Chisel

150746949
6ART109: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-052-2439
Hand Reamer

150522439
64389-6: RNCC: 3 | RNVC: 2

15 Jun 1971

5110-33-005-4422
File Handle

330054422
369.268: RNCC: 3 | RNVC: 2

25 Jul 2001

5110-15-055-3589
Hand Cold Chisel

150553589
50-7-005-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-196-6816
Hand Reamer

151966816
PN UAS 00013276: RNCC: 3 | RNVC: 2
3417F76024493: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-33-103-9080
Hand File

331039080
350.161: RNCC: 3 | RNVC: 2

22 Jun 1995

5110-14-404-8316
Hand File

144048316
2401-160-2: RNCC: 3 | RNVC: 2

20 Nov 1985

5110-33-103-9227
Hand File

331039227
360.462: RNCC: 3 | RNVC: 2

18 Sep 1996

Load More Results