What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 33 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 33of 112

5110-15-074-6078
Hand File

150746078
8INART102BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-3293
Hand File

150743293
1-2D450UNI5488: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5951
Hand File

150745951
5D160UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-237-0621
Power Hacksaw Blade

152370621
3805: RNCC: 3 | RNVC: 2
511015E019785: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-14-439-7328
Bearing Scraper

144397328
C: RNCC: 3 | RNVC: 2

21 May 1990

5110-14-202-2330
Hand Cape Chisel

142022330
4-150: RNCC: 3 | RNVC: 2
3272670275355: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-14-469-0446
Bolt Cutter

144690446
180N-2: RNCC: 3 | RNVC: 2
180N2: RNCC: 3 | RNVC: 2
3272670234406: RNCC: 5 | RNVC: 2
F300 0T 002 7773: RNCC: 6 | RNVC: 9

5 Apr 1994

5110-27-020-9072
Hand Cold Chisel

270209072
10131KK0803: RNCC: 2 | RNVC: 1
352 150: RNCC: 2 | RNVC: 1

15 Dec 2003

5110-15-074-6155
Hand File

150746155
12-106BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-271-5956
Hand Reamer

142715956
E74111-14-5FS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-15-074-6866
Hand Cold Chisel

150746866
150-15ART362UC100UNI2955: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-368-2941
Hand Cold Chisel

143682941
260P: RNCC: 3 | RNVC: 2
0714 63 37: RNCC: 5 | RNVC: 2

20 Feb 1981

5110-15-050-6068
Hand File

150506068
1-2D200UNI5487A: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-274-8071
Hand File

142748071
2402-140-2: RNCC: 3 | RNVC: 2
684-140-2: RNCC: 5 | RNVC: 2
MM140: RNCC: 5 | RNVC: 2
SYQ0903: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-14-274-8063
Hand File

142748063
2408-140-0: RNCC: 3 | RNVC: 2
508-00-140: RNCC: 3 | RNVC: 2
686-140-0: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-14-206-4185
Hand Rasp

142064185
E75001RA250B: RNCC: 2 | RNVC: 2

1 Jan 1964

5110-14-276-3214
Hand Reamer

142763214
E74112-16RS: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-15-205-5216
Hand Bench Shears

152055216
763100-190: RNCC: 3 | RNVC: 2
(241)AK761763100-190: RNCC: 5 | RNVC: 2

16 Mar 2012

5110-14-274-8304
Hand File

142748304
508-2-180: RNCC: 3 | RNVC: 2
2408-180-4: RNCC: 3 | RNVC: 2
4476BIS180-4: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-14-378-2688
Hand Reamer

143782688
E66-003-8HELICOIDALRS: RNCC: 2 | RNVC: 2
169-8: RNCC: 3 | RNVC: 2

20 Jul 1982

5110-15-074-5955
Hand File

150745955
3D160UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-102-7433
Hand File

151027433
2637 TR: RNCC: 3 | RNVC: 2
(241)A03022637TR: RNCC: 5 | RNVC: 2

15 May 1987

5110-14-417-1104
Hand File

144171104
PAMB150: RNCC: 3 | RNVC: 2
0714 61 00: RNCC: 5 | RNVC: 2
PAM.B150: RNCC: 5 | RNVC: 2
3148516002105: RNCC: 5 | RNVC: 2

1 Jul 1987

5110-14-369-7125
Hand Reamer

143697125
E74112-34RS: RNCC: 2 | RNVC: 2
20020-34: RNCC: 3 | RNVC: 2

17 Apr 1981

5110-33-103-8367
Hand Hacksaw Blade

331038367
1125.024: RNCC: 3 | RNVC: 2

11 Jul 1995

5110-15-188-3326
Hand File

151883326
991005: RNCC: 3 | RNVC: 2
17085: RNCC: 5 | RNVC: 2
991 E: RNCC: 5 | RNVC: 2
391346118707: RNCC: 6 | RNVC: 9

2 Sep 2009

5110-14-385-6749
Hand File

143856749
E75001LH125B: RNCC: 2 | RNVC: 2
PDE.MD125: RNCC: 3 | RNVC: 2
3148516057105: RNCC: 5 | RNVC: 2
PDEMD125: RNCC: 5 | RNVC: 2
0605710: RNCC: 5 | RNVC: 9

26 Jul 1983

5110-15-074-3276
Hand File

150743276
D400UNI5487: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-106-1218
Hand File

331061218
410907: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-14-436-4255
Hand File

144364255
243L200: RNCC: 3 | RNVC: 2

3 Jan 1990

5110-14-273-7485
Hand Reamer

142737485
E74103-27RS: RNCC: 2 | RNVC: 2
R603-27: RNCC: 3 | RNVC: 2
166-27: RNCC: 3 | RNVC: 2
1080-27: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-33-103-9060
Hand File

331039060
350.051: RNCC: 3 | RNVC: 2

21 Jun 1995

5110-14-201-0480
Hand File

142010480
NO PRIMARY REF14-201-0480: RNCC: 3 | RNVC: 2
2310: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-541-3841
Gimlet

145413841
17406: RNCC: 3 | RNVC: 2

3 Jun 2004

5110-15-050-9075
Hand File

150509075
B200UNI5492B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-33-103-9106
Hand File

331039106
350.411: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-14-273-7565
Hand Reamer

142737565
E74108-6RS: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-14-276-3209
Hand Reamer

142763209
E74112-9RS: RNCC: 2 | RNVC: 2
F-P-9: RNCC: 3 | RNVC: 2
164-9: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-14-501-7816
Hand Reamer

145017816
NO PRIMARY REF14-501-7816: RNCC: 3 | RNVC: 2
TMEX1CK: RNCC: 5 | RNVC: 9
1J 002 02 44006: RNCC: 5 | RNVC: 9
241 R 00583 000: RNCC: 5 | RNVC: 9
F300 0T 000 1124: RNCC: 6 | RNVC: 9

10 Nov 1997

5110-15-074-5842
Hand File

150745842
1-2D125UNI5494: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-103-9181
Hand File

331039181
352.742: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-433-6283
Circle Cutter

144336283
6254-57619: RNCC: 3 | RNVC: 2

2 Aug 1989

5110-14-411-5064
Hand Reamer

144115064
E66011-2-5JUIL1976HSS: RNCC: 2 | RNVC: 2
176-01-2-5: RNCC: 3 | RNVC: 2

6 Aug 1986

5110-33-103-9109
Hand File

331039109
350.421: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-33-103-9082
Hand File

331039082
900.01030: RNCC: 3 | RNVC: 2
350.163: RNCC: 3 | RNVC: 2

22 Jun 1995

5110-14-464-4969
Hand Reamer

144644969
854-620-014-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5110-27-028-9231
Double Bit Ax

270289231
71A72-35254-AA: RNCC: 2 | RNVC: 1

16 Feb 2006

5110-14-542-3301
Pocket Knife

145423301
S92S: RNCC: 3 | RNVC: 2
SPATHA KNIFE SMALL: RNCC: 3 | RNVC: 2

8 Jul 2004

5110-14-295-6815
Hand Reamer

142956815
E74112-25RS: RNCC: 2 | RNVC: 2

1 Jan 1973

5110-27-018-8218
Corner Bit Brace

270188218
901-RD-26: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-460-7282
Hand Reamer

144607282
E74 112-44-5RS: RNCC: 2 | RNVC: 2
R601-44-5RS: RNCC: 3 | RNVC: 2

8 Feb 1993

5110-27-015-8811
Docking Hand Saw

270158811
99999-NIIN-DA0037030: RNCC: 2 | RNVC: 1

17 Dec 2002

5110-33-155-1304
Hand File

331551304
LIMA TRIANGULAR FINA 14": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-14-220-8457
Hand Cold Chisel

142208457
BB10-200: RNCC: 3 | RNVC: 9

1 Jan 1965

5110-27-056-8752
Double Bit Ax

270568752
MD-7757-0001/21: RNCC: 2 | RNVC: 1
MD-7560-0055: RNCC: 2 | RNVC: 1

22 May 2012

5110-14-273-7471
Hand Reamer

142737471
E74103-13RS: RNCC: 2 | RNVC: 2
8040021-13: RNCC: 3 | RNVC: 2
703CY13: RNCC: 3 | RNVC: 2
R603-13: RNCC: 3 | RNVC: 2
D6600.130: RNCC: 3 | RNVC: 2
SYQ1796: RNCC: 5 | RNVC: 2
F1111-13: RNCC: 5 | RNVC: 2
166-13: RNCC: 5 | RNVC: 2
1080-13: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-207-0871
Plumber's Saw Blade

142070871
19-300: RNCC: 3 | RNVC: 2

1 Jan 1964

5110-15-074-5917
Hand File

150745917
D200UNI5495B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-366-7150
Knife Blade

143667150
011301: RNCC: 3 | RNVC: 2
0113018: RNCC: 3 | RNVC: 2

20 Nov 1980

5110-15-213-2783
Rivet Cutter

152132783
04-501: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-230-4809
Firmer Chisel

142304809
4597-15: RNCC: 3 | RNVC: 9

1 Jan 1967

5110-14-201-0483
Hand File

142010483
NO PRIMARY REF14-201-0483: RNCC: 3 | RNVC: 2
2311: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-488-4677
Hand Reamer

144884677
E74112-5-1RS: RNCC: 2 | RNVC: 2
F-P-5,1: RNCC: 3 | RNVC: 2
164-5,1: RNCC: 3 | RNVC: 2
FP5-1: RNCC: 5 | RNVC: 2
164-5-1: RNCC: 5 | RNVC: 2

14 May 1997

5110-33-155-1122
Hand File

331551122
LIMA PLANA PUNTA S/FINA 4": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-14-337-1668
Hand Wire Stripper

143371668
194CPY: RNCC: 3 | RNVC: 2

7 Oct 1976

5110-15-197-1699
Poising Saw

151971699
PN UAS 00038517: RNCC: 3 | RNVC: 2
3419F76032661: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-074-5886
Hand File

150745886
B300UNI5492B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-068-3935
Hand Reamer

150683935
12000-22: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-15-074-6951
Firmer Chisel

150746951
10ART109: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-165-8750
Pipe Cutter

151658750
313201: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-27-027-5517
Hand Cold Chisel

270275517
5110-TJ1-06003: RNCC: 2 | RNVC: 1

11 Oct 2005

5110-14-369-6953
Hand Hacksaw Frame

143696953
T6: RNCC: 3 | RNVC: 9

17 Apr 1981

5110-15-074-6178
Hand File

150746178
8-107D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-379-1244
Hand Reamer

143791244
14231-42820: RNCC: 3 | RNVC: 2

6 Sep 1982

5110-15-009-8667
Hand File

150098667
2561/2/6: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-27-045-8307
Adz

270458307
L08-400: RNCC: 2 | RNVC: 1

15 Jun 2009

5110-15-074-5861
Hand File

150745861
B300UNI5489B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-103-9151
Hand Rasp

331039151
351.261: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-321-5279
Smooth Plane

143215279
E73-303RAB0TDR0IT42: RNCC: 2 | RNVC: 2

1 Jan 1975

5110-14-276-3213
Hand Reamer

142763213
E74112-14RS: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-33-005-4315
Single Bit Ax

330054315
8130-500: RNCC: 3 | RNVC: 2
156515: RNCC: 5 | RNVC: 2

25 Jul 2001

5110-15-074-6128
Hand File

150746128
8-104MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-3282
Hand File

150743282
B300UNI5488B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6203
Hand Rasp

150746203
B150UNI5523: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6463
Hand Reamer

150746463
42UNI525TAGLIENTIELICACCLEGUTEN-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-074-7050
Firmer Gouge

150747050
4ART113: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6586
Hand Reamer

150746586
1UNI524ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-156-5802
Hand Cold Chisel

331565802
5210.017: RNCC: 3 | RNVC: 2
50107: RNCC: 3 | RNVC: 2
311.175: RNCC: 3 | RNVC: 2

18 Mar 1994

5110-15-054-1398
Back Saw

150541398
4730: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-050-6161
Hand Rasp

150506161
D250UNI5524: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-541-3256
Hand Rasp

145413256
RAB.RD250EM: RNCC: 3 | RNVC: 2

27 May 2004

5110-15-009-8729
Hand File

150098729
2560/3/6: RNCC: 3 | RNVC: 2

1 Mar 1981

5110-14-273-7478
Hand Reamer

142737478
E74103-20RS: RNCC: 2 | RNVC: 2
8040021-20: RNCC: 3 | RNVC: 2
703CY20: RNCC: 3 | RNVC: 2
R603-20: RNCC: 3 | RNVC: 2
D6600.200: RNCC: 3 | RNVC: 2
166-20: RNCC: 5 | RNVC: 2
F1111-20: RNCC: 5 | RNVC: 2
SYQ1803: RNCC: 5 | RNVC: 2
1080-20: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-068-3822
End Cutting Nippers

150683822
199002: RNCC: 3 | RNVC: 2
199/220: RNCC: 5 | RNVC: 2

23 Sep 1983

5110-14-306-2635
Dimpling Die

143062635
PT31-2B1: RNCC: 3 | RNVC: 2
4623: RNCC: 5 | RNVC: 9

1 Jan 1974

5110-33-103-9064
Hand File

331039064
350.062: RNCC: 3 | RNVC: 2

21 Jun 1995

5110-15-074-6462
Hand Reamer

150746462
40UNI525TAGLIENTIELICACCLEGUTEN-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-14-295-6819
Hand Reamer

142956819
E74112-37RS: RNCC: 2 | RNVC: 2

1 Jan 1973

5110-27-018-8180
Corner Bit Brace

270188180
901-LD-20: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-068-3921
Hand Reamer

150683921
12000-10: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-14-291-2030
Hand Drill

142912030
2CLI0N: RNCC: 3 | RNVC: 2
2C: RNCC: 5 | RNVC: 2
321: RNCC: 5 | RNVC: 9
2D: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-27-028-7703
Scraper Blade

270287703
652474004: RNCC: 2 | RNVC: 1

6 Feb 2006

5110-15-116-3684
Hand File

151163684
2301,HIEB 2,160MM: RNCC: 3 | RNVC: 2

28 Apr 1993

5110-15-074-6174
Hand File

150746174
10-107MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-179-4956
Firmer Chisel

151794956
2-16-381: RNCC: 3 | RNVC: 2
00.07.55.76: RNCC: 5 | RNVC: 2

22 Jan 2007

5110-15-074-6610
Hand Reamer

150746610
2-5UNI531ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-530-2001
Hand File

145302001
TP.EF150EM: RNCC: 3 | RNVC: 2
3148516512703: RNCC: 5 | RNVC: 2

22 May 2002

5110-14-449-4436
File Handle

144494436
AL130: RNCC: 3 | RNVC: 2

19 Aug 1991

5110-14-370-1119
Bolt Cutter

143701119
999A3: RNCC: 3 | RNVC: 2
130072: RNCC: 5 | RNVC: 2

18 May 1981

5110-15-074-5899
Hand File

150745899
D150UNI5492B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-196-9979
File Handle

151969979
PN UAS 00041555: RNCC: 3 | RNVC: 2
5110F76034785: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-33-156-5803
Hand Cold Chisel

331565803
5210.020: RNCC: 3 | RNVC: 2
50108: RNCC: 3 | RNVC: 2
311.200: RNCC: 3 | RNVC: 2
8740.02000: RNCC: 5 | RNVC: 2

18 Mar 1994

5110-15-075-0829
Hand File

150750829
5D180UNI5670A: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-055-3625
Hand File

150553625
D125UNI5491B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-530-5927
Riffler Set

145305927
AS.12RI180T2: RNCC: 3 | RNVC: 2

26 Jun 2002

5110-33-003-6141
File Handle

330036141
4089-1: RNCC: 3 | RNVC: 2

25 May 1998

5110-15-196-9868
Hand File

151969868
PN UAS 00037668: RNCC: 3 | RNVC: 2
5110F76032241: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-054-4816
Hand Cold Chisel

150544816
59-3-767: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-271-5941
Hand Reamer

142715941
E74111-27FS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-074-6165
Hand File

150746165
12-106D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-064-0821
Hand File

150640821
D 150UNI5487-64: RNCC: 2 | RNVC: 2

20 Sep 1983

5110-14-402-9078
File Handle

144029078
MAN0: RNCC: 3 | RNVC: 2
3148516290502: RNCC: 5 | RNVC: 2
0714 61 60: RNCC: 5 | RNVC: 2
0714 61 61: RNCC: 5 | RNVC: 2

25 Jul 1985

5110-14-288-1763
Hand Reamer

142881763
C46625: RNCC: 3 | RNVC: 2

1 Jan 1972

5110-33-004-1956
Hand Hacksaw Blade

330041956
1141.024: RNCC: 3 | RNVC: 2

3 Sep 1998

5110-15-188-3332
Hand Rasp

151883332
09900120: RNCC: 3 | RNVC: 2
13048: RNCC: 5 | RNVC: 2
990 M PE: RNCC: 5 | RNVC: 2
391341145608: RNCC: 6 | RNVC: 9

2 Sep 2009

5110-15-204-6838
Poising Saw

152046838
D27263032: RNCC: 3 | RNVC: 2
(241)A0302D27263032: RNCC: 5 | RNVC: 2

9 Dec 2011

5110-15-068-3941
Hand Reamer

150683941
12000-28: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-15-074-6024
Hand File

150746024
175UNI5518: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-052-4058
Hand Rasp

150524058
300UNI5526: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-009-8734
Hand File

150098734
2560/1/6: RNCC: 3 | RNVC: 2

1 Mar 1981

5110-33-103-9204
Hand File

331039204
360.062: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-285-4781
Hand File

142854781
NO PRIMARY REF14-285-4781: RNCC: 3 | RNVC: 2
2314: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-14-403-3802
Knife Blade

144033802
845.L3: RNCC: 3 | RNVC: 9
91719476: RNCC: 5 | RNVC: 2
0207126: RNCC: 5 | RNVC: 9
3148512071266: RNCC: 5 | RNVC: 9
845-L3: RNCC: 5 | RNVC: 9
845L3: RNCC: 5 | RNVC: 9

21 Aug 1985

5110-14-232-2368
Hand Cold Chisel

142322368
M0B29-220: RNCC: 3 | RNVC: 2

1 Jan 1967

5110-33-155-1098
Hand File

331551098
LIMA CUADRADA BASTA 10": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-15-074-6146
Hand File

150746146
14-105MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-310-3342
Hand File

143103342
671-300DENTURE0BLIQUE: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-437-5758
Hand File

144375758
NO PRIMARY REF14-437-5758: RNCC: 3 | RNVC: 2
AIGCT180T0: RNCC: 5 | RNVC: 2
91592365: RNCC: 5 | RNVC: 2

7 Feb 1990

5110-14-232-2166
Hand File

142322166
E75001LC150B: RNCC: 2 | RNVC: 2
0910150204: RNCC: 3 | RNVC: 2
109-MD-150: RNCC: 3 | RNVC: 2
0910150201: RNCC: 3 | RNVC: 2
910-150DD: RNCC: 3 | RNVC: 2
SYQ0906: RNCC: 5 | RNVC: 2
MM15: RNCC: 5 | RNVC: 2

1 Jan 1967

5110-14-270-3974
Hand Reamer

142703974
E66003-8RS: RNCC: 2 | RNVC: 2
EXP-QC-TD-8: RNCC: 3 | RNVC: 2
168-8: RNCC: 3 | RNVC: 2
EXPQCTD8: RNCC: 5 | RNVC: 2

1 Jan 1970

5110-27-000-8009
Hand Cold Chisel

270008009
354/150: RNCC: 2 | RNVC: 1
01080201405: RNCC: 2 | RNVC: 1
5500 40 0150: RNCC: 3 | RNVC: 2
10131KK1304: RNCC: 3 | RNVC: 2

23 Oct 1990

5110-27-018-8549
Corner Bit Brace

270188549
901-GK-19D: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-249-8323
Hardy

142498323
M0B21-60: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-14-338-3099
Woodcarving Gouge

143383099
E73-201G0UGEBISEAUINTERIEUR10: RNCC: 2 | RNVC: 2

6 Nov 1976

5110-14-488-5366
File Holder

144885366
LM-36: RNCC: 3 | RNVC: 2
LM36: RNCC: 5 | RNVC: 2
3272670217805: RNCC: 5 | RNVC: 2

16 May 1997

5110-14-270-3982
Hand Reamer

142703982
E66003-18RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-074-6945
Firmer Chisel

150746945
24ART108: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-235-6403
Bearing Scraper

142356403
M7-5M31-16A15: RNCC: 3 | RNVC: 2
M7-5M31-16A15: RNCC: 5 | RNVC: 9

1 Jan 1967

5110-14-271-5891
Hand Reamer

142715891
E74111-12RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-488-4869
Hand File Set

144884869
AS.12LBP140T4: RNCC: 3 | RNVC: 2
AS-12LBP140T4: RNCC: 5 | RNVC: 2
0629860: RNCC: 5 | RNVC: 9

14 May 1997

5110-14-201-7246
Hand Reamer

142017246
E74104-140RN: RNCC: 2 | RNVC: 2
3088-14: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-14-368-9095
Hand File

143689095
E75001LA400B: RNCC: 2 | RNVC: 2
900-400DD: RNCC: 3 | RNVC: 2
101DEMID0UCE400: RNCC: 5 | RNVC: 9

10 Mar 1981

5110-15-199-0668
Hand Reamer

151990668
7730-5.5: RNCC: 3 | RNVC: 2
F7730-5.5: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-271-6033
Hand File

142716033
E75001LF350A: RNCC: 2 | RNVC: 2
0914350104: RNCC: 3 | RNVC: 2
110-BA-350: RNCC: 3 | RNVC: 2
914-350B: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-15-074-6215
Hand Rasp

150746215
B200UNI5521: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5941
Hand File

150745941
2D140UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-040-7373
Hand File Set

140407373
000161003S: RNCC: 3 | RNVC: 2

1 Jan 1972

5110-14-521-6490
Hand Reamer

145216490
250-5-6H8: RNCC: 3 | RNVC: 2

30 Aug 2000

5110-14-530-2003
Hand File

145302003
CT.MD250: RNCC: 3 | RNVC: 2
3148516062208: RNCC: 5 | RNVC: 2

22 May 2002

5110-14-201-7237
Hand Reamer

142017237
E66011A7FN: RNCC: 2 | RNVC: 2

1 Jan 1962

5110-15-074-5875
Hand File

150745875
D200UNI5489B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-379-1246
Hand Reamer

143791246
14231-42840: RNCC: 3 | RNVC: 2

6 Sep 1982

5110-14-370-1177
Hand File

143701177
DRDB300EM: RNCC: 3 | RNVC: 2
102008: RNCC: 5 | RNVC: 2
3148516509406: RNCC: 5 | RNVC: 2

18 May 1981

5110-14-270-3973
Hand Reamer

142703973
E66003-7RS: RNCC: 2 | RNVC: 2
168-7: RNCC: 3 | RNVC: 2
EXP-QC-TD-7: RNCC: 3 | RNVC: 2
EXPQCTD7: RNCC: 5 | RNVC: 2

1 Jan 1970

5110-14-204-9376
Hand File

142049376
E75001LG150B: RNCC: 2 | RNVC: 2
CARMD150: RNCC: 3 | RNVC: 2
0913150201: RNCC: 3 | RNVC: 2
913-150DD: RNCC: 3 | RNVC: 2
102459: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-27-015-8801
Smooth Plane

270158801
99999-NIIN-DA0037566: RNCC: 2 | RNVC: 1

17 Dec 2002

5110-14-378-2685
Hand Reamer

143782685
E66-003-8-5HELIC0IDALRS: RNCC: 2 | RNVC: 2
169-8,5: RNCC: 3 | RNVC: 2

20 Jul 1982

5110-14-460-5680
Hand Reamer

144605680
3181PM1A275113-213250: RNCC: 3 | RNVC: 2

1 Feb 1993

5110-14-488-4872
Hand Hacksaw Frame

144884872
607.MT: RNCC: 3 | RNVC: 2
3148511885086: RNCC: 5 | RNVC: 2
607-MT: RNCC: 5 | RNVC: 2
162-0093: RNCC: 5 | RNVC: 2
0695 552 144: RNCC: 5 | RNVC: 2
0188508: RNCC: 5 | RNVC: 9
FACOM607.MT: RNCC: 5 | RNVC: 9
F300 0T 022 2812: RNCC: 6 | RNVC: 9

14 May 1997

5110-15-054-1359
Crosscut Hand Saw

150541359
56-5-278-300: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-338-3101
Woodcarving Gouge

143383101
E73-201G0UGEBISEAUINTERIEUR20: RNCC: 2 | RNVC: 2

6 Nov 1976

5110-14-531-4808
Pocket Knife

145314808
0-30100-00000-81: RNCC: 3 | RNVC: 2

21 Aug 2002

5110-14-427-6889
Hand Rasp

144276889
942-150 MP: RNCC: 3 | RNVC: 2

3 Nov 1988

5110-14-455-0106
Dimpling Punch

144550106
853-910-009-0: RNCC: 3 | RNVC: 2

1 May 1992

5110-14-555-4663
Line Cutter

145554663
P2012220200: RNCC: 3 | RNVC: 2

20 Nov 2007

5110-14-491-4140
Bolt Cutter

144914140
180N-3: RNCC: 3 | RNVC: 2
180N3: RNCC: 3 | RNVC: 2
3272670286788: RNCC: 5 | RNVC: 2
F300 0T 002 7774: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-14-422-4095
Hand Drill

144224095
NO PRIMARY REF14-422-4095: RNCC: 3 | RNVC: 2
0206800: RNCC: 5 | RNVC: 2
833A: RNCC: 5 | RNVC: 2
0212385D00: RNCC: 5 | RNVC: 2
91630359: RNCC: 5 | RNVC: 2

3 Mar 1988

5110-14-270-3984
Hand Reamer

142703984
E66003-22RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-199-0801
Hand File

151990801
2600/1-14: RNCC: 3 | RNVC: 2
D2600/1-14: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-464-4890
Dimpling Die

144644890
851-910-026-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5110-14-271-5927
Hand Reamer

142715927
E74111-5FS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-464-4956
Hand Reamer

144644956
854-600-022-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5110-15-120-9074
Hand File

151209074
STD/04.045: RNCC: 3 | RNVC: 2

4 Sep 1995

5110-14-295-6809
Hand Reamer

142956809
E74112-16-5RS: RNCC: 2 | RNVC: 2

1 Jan 1973

5110-14-273-7469
Hand Reamer

142737469
E74103-11RS: RNCC: 2 | RNVC: 2
R603-11: RNCC: 3 | RNVC: 2
D6600.110: RNCC: 3 | RNVC: 2
8010021-11: RNCC: 3 | RNVC: 2
703CY11: RNCC: 3 | RNVC: 2
SYQ1794: RNCC: 5 | RNVC: 2
166-11: RNCC: 5 | RNVC: 2
F1111-11: RNCC: 5 | RNVC: 2
1080-11: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-317-7671
Hand Wire Stripper

143177671
401050-00: RNCC: 3 | RNVC: 2
PINCE4010SANSC0UTEAU: RNCC: 5 | RNVC: 2
4010: RNCC: 5 | RNVC: 2

1 Jan 1975

5110-27-043-7679
Hand Drill

270437679
XTC143BK: RNCC: 2 | RNVC: 1

15 Dec 2008

5110-27-059-1401
Double Bit Ax

270591401
50910: RNCC: 5 | RNVC: 9

4 Jun 2013

5110-27-034-5834
Hand Drill

270345834
DA0136564: RNCC: 2 | RNVC: 1
GSR-12-1: RNCC: 5 | RNVC: 9

25 Jan 2007

5110-14-271-5935
Hand Reamer

142715935
E74111-14FS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-33-105-8797
Hand File

331058797
410105: RNCC: 3 | RNVC: 2

21 Nov 1997

5110-15-187-2936
Hand Wire Stripper

151872936
UZ1462718: RNCC: 3 | RNVC: 2
(241)A9410UZ1462718: RNCC: 5 | RNVC: 2

11 Mar 2009

5110-15-074-7039
Firmer Gouge

150747039
16ART112: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-541-0239
Rip Hand Saw

145410239
6304500010: RNCC: 3 | RNVC: 2
3303806304028: RNCC: 5 | RNVC: 2

5 May 2004

5110-15-074-6651
Hand Reamer

150746651
8UNI532ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-7017
Turning Chisel

150747017
26ART102: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-103-9136
Hand File

331039136
350.673: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-14-541-3834
Rip Hand Saw

145413834
21017: RNCC: 3 | RNVC: 2

3 Jun 2004

5110-27-047-2728
Hand Cable Stripper

270472728
E25-13-0160: RNCC: 2 | RNVC: 1
E25-13-0160: RNCC: 5 | RNVC: 9

17 Nov 2009

5110-14-541-0210
Firmer Chisel

145410210
7011060201: RNCC: 3 | RNVC: 2
3303807011017: RNCC: 5 | RNVC: 2

5 May 2004

5110-14-523-8232
Rip Hand Saw

145238232
STANLEY15288: RNCC: 3 | RNVC: 2

5 Feb 2001

5110-15-074-6384
Hand Reamer

150746384
14UNI525ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6906
Firmer Chisel

150746906
4ART106: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-192-5291
Keyhole Saw

331925291
8822.010: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-33-200-1091
Hatchet Handle

332001091
7063.472.0002: RNCC: 3 | RNVC: 2
4730700103: RNCC: 5 | RNVC: 2

8 Oct 2001

5110-14-422-5939
Doweling Jig

144225939
548052: RNCC: 3 | RNVC: 2

10 Mar 1988

5110-33-003-6143
File Handle

330036143
4089-3: RNCC: 3 | RNVC: 2

25 May 1998

5110-14-466-6740
Hand Hacksaw Blade

144666740
608-L12: RNCC: 3 | RNVC: 2
3148511885406: RNCC: 5 | RNVC: 2
162-0100: RNCC: 5 | RNVC: 2
FACOM608-L12: RNCC: 5 | RNVC: 9

24 Nov 1993

5110-27-035-2860
Hand File Set

270352860
ESAS, 5.LI TAKIM: RNCC: 2 | RNVC: 1

7 Mar 2007

5110-15-074-6172
Hand File

150746172
16-107BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-27-056-2621
Hand File Set

270562621
511000-2234: RNCC: 5 | RNVC: 9

6 Mar 2012

5110-14-424-3455
Bolt Cutter

144243455
188N-3: RNCC: 3 | RNVC: 2
188N3: RNCC: 3 | RNVC: 2
3272670251243: RNCC: 5 | RNVC: 2
91615794: RNCC: 5 | RNVC: 2

19 May 1988

5110-14-290-9129
Hand File

142909129
E75001LF250C: RNCC: 2 | RNVC: 2
0914250301: RNCC: 3 | RNVC: 2
914-250D: RNCC: 3 | RNVC: 2

1 Jan 1972

5110-15-221-4889
Digging Pick

152214889
EX5110RP4800713: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-214-3816
Firmer Chisel

142143816
E73-201CISEAUDEMENUISIER8: RNCC: 2 | RNVC: 2
628-2LI0NS8: RNCC: 5 | RNVC: 2
628-8: RNCC: 5 | RNVC: 9
C111E08: RNCC: 5 | RNVC: 9

1 Jan 1965

5110-15-074-6137
Hand File

150746137
16-104D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-210-7192
Firmer Gouge

142107192
4600-15: RNCC: 3 | RNVC: 2
867-15: RNCC: 5 | RNVC: 2
867-15: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-14-270-3931
Hand Reamer

142703931
E66011A6RN: RNCC: 2 | RNVC: 2
1AH16016: RNCC: 3 | RNVC: 2
D7601.060: RNCC: 3 | RNVC: 2
8040061-6: RNCC: 3 | RNVC: 2
703CO6: RNCC: 3 | RNVC: 2
SYQ1955: RNCC: 5 | RNVC: 2
30-05-6: RNCC: 5 | RNVC: 9
1140-6: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-14-270-3996
Hand Reamer

142703996
E74104-42RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-274-8373
Hand File

142748373
645-150: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-14-271-5949
Hand Reamer

142715949
E74111-8-5FS: RNCC: 2 | RNVC: 1

1 Jan 1970

5110-14-271-6058
Hand File

142716058
E75001LH100B: RNCC: 2 | RNVC: 2
107-MID-100: RNCC: 3 | RNVC: 2
0907100204: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-27-059-9894
Bolt Cutter

270599894
TIJ10636: RNCC: 2 | RNVC: 1

20 Dec 2013

5110-15-201-1065
Hand Hacksaw Frame

152011065
ARCHETTO200: RNCC: 3 | RNVC: 2
(241)A1572ARCHETTO200: RNCC: 5 | RNVC: 2

29 May 2006

5110-15-068-3930
Hand Reamer

150683930
12000-17: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-14-242-8698
Claw Hatchet

142428698
1437-650: RNCC: 3 | RNVC: 9
4650-650: RNCC: 5 | RNVC: 9

1 Jan 1967

5110-15-074-6607
Hand Reamer

150746607
1UNI531ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-179-5862
Firmer Chisel Set

151795862
16-888: RNCC: 3 | RNVC: 2

11 Apr 2007

5110-14-420-9540
Hand Rasp

144209540
RAB.DRDMD250EM: RNCC: 3 | RNVC: 2
3148516513601: RNCC: 5 | RNVC: 2
91614749: RNCC: 5 | RNVC: 2
0714 61 69: RNCC: 5 | RNVC: 2
0651360: RNCC: 5 | RNVC: 9

6 Jan 1988

5110-27-043-7685
Hand Drill

270437685
KD1001 K: RNCC: 2 | RNVC: 1

15 Dec 2008

5110-14-369-7122
Hand Reamer

143697122
E74112-26RS: RNCC: 2 | RNVC: 2
20020-26: RNCC: 3 | RNVC: 2

17 Apr 1981

5110-15-074-3279
Hand File

150743279
B150UNI5488B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-472-3916
Bolt Cutter

144723916
0219605: RNCC: 3 | RNVC: 2
998.A2: RNCC: 5 | RNVC: 2
998A2: RNCC: 5 | RNVC: 2

19 Oct 1994

5110-14-271-6138
Hand File

142716138
E75001LM150B: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-265-6536
Hand File

142656536
277: RNCC: 3 | RNVC: 2
277: RNCC: 5 | RNVC: 2
101796: RNCC: 5 | RNVC: 2
3148511637005: RNCC: 5 | RNVC: 2
0163700: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-15-116-3685
Hand File

151163685
2307,HIEB 2,160MM: RNCC: 3 | RNVC: 2

28 Apr 1993

5110-15-074-6962
Firmer Chisel

150746962
28ART108: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-439-7987
Hand File

144397987
RD.MD150: RNCC: 3 | RNVC: 2
RDMD150: RNCC: 5 | RNVC: 2
91355332: RNCC: 5 | RNVC: 2
91455373: RNCC: 5 | RNVC: 2
0714 61 49: RNCC: 5 | RNVC: 2
3148516040305: RNCC: 5 | RNVC: 2
0604030: RNCC: 5 | RNVC: 9

23 May 1990

5110-27-022-2564
Turning Chisel

270222564
10131MK1041: RNCC: 2 | RNVC: 1

20 Feb 2004

5110-15-179-5863
Push Drill

151795863
02-715: RNCC: 3 | RNVC: 2

11 Apr 2007

5110-15-009-8742
Hand File

150098742
2561/1/6: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-15-074-6129
Hand File

150746129
10-104MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-27-020-0580
Scraper Blade

270200580
10131KR0119: RNCC: 2 | RNVC: 1
239.5X63.5X63.5X22: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-218-7435
Single Bit Ax

142187435
NOREF142187435: RNCC: 3 | RNVC: 2
B0I2-311AETS1-33: RNCC: 5 | RNVC: 9

1 Jan 1965

5110-14-308-1188
Hand Reamer

143081188
C46662: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-391-6452
Hand File

143916452
AIGRD140T2: RNCC: 3 | RNVC: 2
3148516313607: RNCC: 5 | RNVC: 2

21 Mar 1984

5110-14-442-5237
Hand Reamer

144425237
J22515-1: RNCC: 3 | RNVC: 9
AEDJ22515-1: RNCC: 5 | RNVC: 9

17 Oct 1990

5110-15-198-5633
Hand Rasp

151985633
99990440: RNCC: 3 | RNVC: 2

14 Oct 2004

5110-14-459-0267
Pinking Shears

144590267
841.3: RNCC: 3 | RNVC: 2
3148512069492: RNCC: 5 | RNVC: 2
91537370: RNCC: 5 | RNVC: 2
0206949: RNCC: 5 | RNVC: 9

14 Nov 1992

5110-14-441-1460
Hand Wire Stripper

144411460
173A: RNCC: 3 | RNVC: 2
3148511402009: RNCC: 5 | RNVC: 2
91638758: RNCC: 5 | RNVC: 2
0140200: RNCC: 5 | RNVC: 9

22 Aug 1990

5110-14-280-9750
Hand Reamer

142809750
E74108D20RS: RNCC: 2 | RNVC: 1

1 Jan 1971

5110-14-240-0852
Back Saw

142400852
C269B25: RNCC: 3 | RNVC: 9
269B25: RNCC: 5 | RNVC: 2
2612: RNCC: 5 | RNVC: 9
B520A25G0LDENBER: RNCC: 5 | RNVC: 9

1 Jan 1967

5110-15-050-9117
Hand File

150509117
B300UNI5487A: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-074-5880
Hand File

150745880
D450UNI5489B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5868
Hand File

150745868
1-2D250UNI5489: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-371-2998
Hand Reamer Set

143712998
0001326600: RNCC: 3 | RNVC: 2
M0T132: RNCC: 5 | RNVC: 2

5 Aug 1981

5110-27-024-3497
Hand Cold Chisel

270243497
05001FK0205: RNCC: 2 | RNVC: 1

14 Oct 2004

5110-14-528-8123
Hand Hacksaw Blade

145288123
666A.8: RNCC: 3 | RNVC: 2
0191999: RNCC: 5 | RNVC: 2
SYQ0815: RNCC: 5 | RNVC: 2

18 Feb 2002

5110-15-074-6213
Hand Rasp

150746213
1-2D350UNI5523: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5821
Hand File

150745821
1-2D250UNI5493: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-280-0779
Hand Reamer

142800779
0795-78: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-15-197-1698
Poising Saw

151971698
PN UAS 00042358: RNCC: 3 | RNVC: 2
5120F76035118: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-074-5947
Hand File

150745947
4D160UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-003-6145
Hand File

330036145
410303: RNCC: 3 | RNVC: 2

25 May 1998

5110-15-074-6064
Hand File

150746064
10INART101BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-062-5548
Circle Cutter

150625548
3691-200: RNCC: 3 | RNVC: 2

31 May 1981

5110-27-043-6652
Hand Rasp

270436652
60070 FP: RNCC: 2 | RNVC: 1

1 Dec 2008

5110-15-054-1380
Rip Hand Saw

150541380
5445-650: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-074-6880
Hand Cape Chisel

150746880
180-9ART364: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-33-155-1113
Hand File

331551113
LIMA MEDIA CANA SEMI-FINA 12IN: RNCC: 3 | RNVC: 2

13 Jun 1990

5110-15-074-6915
Firmer Chisel

150746915
M26ART106: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-120-9048
Hand Cold Chisel

151209048
362002: RNCC: 3 | RNVC: 2

4 Sep 1995

5110-14-201-5393
Hand File

142015393
E75001LE200C: RNCC: 2 | RNVC: 2
0912200301: RNCC: 3 | RNVC: 2
912-200D: RNCC: 3 | RNVC: 2
102007: RNCC: 5 | RNVC: 2

1 Jan 1962

5110-15-050-9085
Hand File

150509085
B300UNI5494: RNCC: 2 | RNVC: 2
P-155216-001: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-271-6028
Hand File

142716028
E75001LB350B: RNCC: 2 | RNVC: 2
0906350204: RNCC: 3 | RNVC: 2
102-MID-350: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-27-021-3898
Hand Cold Chisel

270213898
5110-15924-00006: RNCC: 2 | RNVC: 1

15 Dec 2003

5110-14-423-2904
Hand Reamer

144232904
REGL9-10: RNCC: 3 | RNVC: 2
91620127: RNCC: 5 | RNVC: 2

14 Apr 1988

5110-14-201-3112
Bearing Scraper

142013112
50302: RNCC: 3 | RNVC: 2
503-2GP: RNCC: 5 | RNVC: 2
91598666: RNCC: 5 | RNVC: 2

1 Jan 1962

5110-15-074-6672
Hand Reamer

150746672
5-15UNI532ACCIAI0CARB0NI0SPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-003-8297
Hand Drill

150038297
3601A7B500: RNCC: 3 | RNVC: 2
GSB19-2RE: RNCC: 3 | RNVC: 9
(241)A42913601A7B500: RNCC: 5 | RNVC: 2

28 Nov 2013

5110-14-389-2291
Hand Wire Stripper

143892291
NO PRIMARY REF14-389-2291: RNCC: 3 | RNVC: 2
903RT398: RNCC: 5 | RNVC: 9
85-691-7255: RNCC: 6 | RNVC: 9

29 Nov 1983

5110-14-383-8668
Hand Reamer

143838668
E74112-42-5RS: RNCC: 2 | RNVC: 2
F-P-42,5: RNCC: 3 | RNVC: 2
F-P-42-5: RNCC: 3 | RNVC: 2
164-42-5: RNCC: 3 | RNVC: 2

11 Apr 1983

5110-14-274-8297
Hand File

142748297
2411-140-4: RNCC: 3 | RNVC: 2
4480-140-4: RNCC: 3 | RNVC: 2
511-2-140: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-14-210-5441
Hand File

142105441
NO PRIMARY REF14-210-5441: RNCC: 3 | RNVC: 2
0UTF43: RNCC: 5 | RNVC: 2
LIMEAIGUILLE140R0NDE3: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-14-273-7461
Hand Reamer

142737461
E74103-4-5RS: RNCC: 2 | RNVC: 2
R603-4-5: RNCC: 3 | RNVC: 2
166-4-5: RNCC: 3 | RNVC: 2
1080-4-5: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-378-2682
Bolt Cutter

143782682
188N-4: RNCC: 3 | RNVC: 2
188N4: RNCC: 3 | RNVC: 2
3272670226272: RNCC: 5 | RNVC: 2

20 Jul 1982

5110-14-273-7570
Hand Reamer

142737570
E74108-11RS: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-15-054-2498
Hand Wire Stripper

150542498
2192: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-074-7154
Blacksmith's Chisel

150747154
UNI4140UC100-2955: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-010-7975
Double Bit Ax

270107975
99999-NIIN-DA0037637: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-33-155-1289
Hand File

331551289
LIMA REDONDA FINA 12": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-14-271-5930
Hand Reamer

142715930
E74111-8FS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-33-156-6037
Pocket Knife

331566037
4875.008: RNCC: 3 | RNVC: 2
850.370: RNCC: 3 | RNVC: 2

11 Jul 1995

5110-33-156-5756
Bow Saw

331565756
649.300: RNCC: 3 | RNVC: 2

29 Aug 1996

5110-14-550-5334
Wood Scraper

145505334
0-28-590: RNCC: 3 | RNVC: 2

22 Jun 2006

5110-15-000-2089
Dovetail Saw

150002089
58 0400: RNCC: 3 | RNVC: 2

8 Feb 2013

5110-27-039-9430
Hand Cold Chisel

270399430
9640-37014-00012: RNCC: 2 | RNVC: 1

28 Dec 2007

5110-33-161-6608
Scraping Knife

331616608
5671.013: RNCC: 3 | RNVC: 2

24 Apr 1995

5110-33-005-4418
Hand File

330054418
9040102: RNCC: 3 | RNVC: 2
350.562: RNCC: 3 | RNVC: 2

25 Jul 2001

5110-15-050-9101
Hand File

150509101
B350UNI5501B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-518-9150
Back Saw

145189150
308-12-U13-14: RNCC: 3 | RNVC: 2

28 Feb 2000

5110-14-379-1236
Hand Reamer

143791236
14231-42460: RNCC: 3 | RNVC: 2

6 Sep 1982

5110-14-274-8298
Hand File

142748298
2406-140-4: RNCC: 3 | RNVC: 2
4474-140-4: RNCC: 3 | RNVC: 2
506-2-140: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-15-068-3956
Hand Hacksaw Blade

150683956
2721-22-12: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-14-271-5886
Hand Reamer

142715886
E74111-7RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-274-8360
Hand File

142748360
E75-002FENDANTE150D0UCE: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-33-106-4189
Hand Cold Chisel

331064189
311.150: RNCC: 3 | RNVC: 2

19 Dec 1997

5110-15-074-6855
Hand Cold Chisel

150746855
100-15ART32650CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-303-3568
Hand Reamer

143033568
E74105-25X12FN: RNCC: 2 | RNVC: 2

1 Jan 1973

5110-14-321-1501
Tailor's Shears

143211501
M17: RNCC: 3 | RNVC: 2

1 Jan 1975

5110-15-074-6120
Hand File

150746120
12INART103D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-393-0330
Hand File

143930330
AIGRD160T2: RNCC: 3 | RNVC: 2
3148516317209: RNCC: 5 | RNVC: 2

12 Apr 1984

5110-15-074-6063
Hand File

150746063
8INART101BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-188-5335
Poising Saw

151885335
MK180: RNCC: 3 | RNVC: 2
(241)AF120MK180: RNCC: 5 | RNVC: 2

5 Oct 2009

5110-15-074-6577
Hand Reamer

150746577
0-6UNI524ACCIAI0LEGAT0DAUTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6950
Firmer Chisel

150746950
8ART109: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-7026
Turning Chisel

150747026
14ART102CRVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-157-7886
Chisel Bar

151577886
37MM.200: RNCC: 3 | RNVC: 2
37MM.200: RNCC: 5 | RNVC: 1
(241)A087337MM.200: RNCC: 5 | RNVC: 2

20 Oct 2003

5110-15-155-7127
Hand Reamer

151557127
S2200: RNCC: 3 | RNVC: 2

23 May 2002

5110-27-037-6613
Hand Cold Chisel

270376613
30 CM-6K: RNCC: 2 | RNVC: 1

16 Aug 2007

5110-14-362-6848
Bearing Scraper

143626848
9970-125-908: RNCC: 3 | RNVC: 2

19 Mar 1980

5110-14-271-6051
Hand File

142716051
E75001LG250B: RNCC: 2 | RNVC: 2
0913250201: RNCC: 3 | RNVC: 2
913-250DD: RNCC: 3 | RNVC: 2
0913250204: RNCC: 3 | RNVC: 2
111-MD-250: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-14-336-5397
Hand Reamer

143365397
E74103-5-5RS: RNCC: 2 | RNVC: 2
R603-5-5: RNCC: 3 | RNVC: 2
166-5-5: RNCC: 3 | RNVC: 2
1080-5-5: RNCC: 5 | RNVC: 9

14 Aug 1976

5110-14-464-4949
Hand Reamer

144644949
854-600-015-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5110-14-201-3215
Firmer Chisel

142013215
E73-201CISEAUDEMENUISIER35: RNCC: 2 | RNVC: 2
628-2LI0NS35: RNCC: 5 | RNVC: 2
628-35: RNCC: 5 | RNVC: 9
C111E35: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-15-074-6205
Hand Rasp

150746205
B250UNI5523: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-439-7330
Bearing Scraper

144397330
C42: RNCC: 3 | RNVC: 2

21 May 1990

5110-14-543-8155
Knife Blade

145438155
376M241: RNCC: 3 | RNVC: 2

11 Dec 2004

5110-15-195-9476
Hand File

151959476
017200104: RNCC: 3 | RNVC: 2

30 May 2011

5110-15-055-3634
Hand File

150553634
D125UNI5497A: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-074-5873
Hand File

150745873
D100UNI5489B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5869
Hand File

150745869
1-2D300UNI5489: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-206-1313
Craftsman's Knife

152061313
B21737000: RNCC: 3 | RNVC: 2
(241)A0302B21737000: RNCC: 5 | RNVC: 2

23 May 2012

5110-15-196-9873
Hand File

151969873
PN UAS 00049359: RNCC: 3 | RNVC: 2
5120F76040007: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-074-5876
Hand File

150745876
D250UNI5489B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-273-7463
Hand Reamer

142737463
E74103-6RS: RNCC: 2 | RNVC: 2
D6600.060: RNCC: 3 | RNVC: 2
R603-6: RNCC: 3 | RNVC: 2
8040021-6: RNCC: 3 | RNVC: 2
703CY6: RNCC: 3 | RNVC: 2
SYQ1809: RNCC: 5 | RNVC: 2
166-6: RNCC: 5 | RNVC: 2
F1111-6: RNCC: 5 | RNVC: 2
1080-6: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-050-9110
Hand File

150509110
D250UNI489A: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-14-471-9908
Hand File

144719908
TRI.B300: RNCC: 3 | RNVC: 2
3148516046000: RNCC: 5 | RNVC: 2
TRI.B 300: RNCC: 5 | RNVC: 2
TRIB300: RNCC: 5 | RNVC: 2
0714 61 18: RNCC: 5 | RNVC: 2
0604600: RNCC: 5 | RNVC: 9

28 Sep 1994

5110-15-204-6837
Poising Saw

152046837
D27263024: RNCC: 3 | RNVC: 2
(241)A0302D27263024: RNCC: 5 | RNVC: 2

9 Dec 2011

5110-15-074-5918
Hand File

150745918
D250UNI5495B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-27-025-0115
File Handle

270250115
5002630349: RNCC: 2 | RNVC: 1

24 Dec 2004

5110-15-074-6457
Hand Reamer

150746457
32UNI525TAGLIENTIELICACCLEGUTEN-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-14-306-2634
Dimpling Die

143062634
PT31-2B2: RNCC: 3 | RNVC: 2
PT3-1-2B2: RNCC: 5 | RNVC: 9
PT31-2B2: RNCC: 5 | RNVC: 9
4625: RNCC: 5 | RNVC: 9

1 Jan 1974

5110-33-003-6152
Hand File

330036152
419801: RNCC: 3 | RNVC: 2

25 May 1998

5110-15-074-6941
Firmer Chisel

150746941
16ART108: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6386
Hand Reamer

150746386
16UNI525ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6035
Hand File

150746035
2-1-2D350UNI5500: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-006-0445
Firmer Chisel Set

150060445
794780 3: RNCC: 3 | RNVC: 2
(241)A0019794780 3: RNCC: 5 | RNVC: 2

12 Dec 2013

5110-14-546-3853
Line Cutter

145463853
P2012220000: RNCC: 3 | RNVC: 2

29 Jun 2005

5110-27-024-5199
Tube Cutter

270245199
040206014481: RNCC: 2 | RNVC: 1

9 Nov 2004

5110-14-545-2263
Line Cutter

145452263
P2002910154: RNCC: 3 | RNVC: 2

25 Mar 2005

5110-14-440-0809
Smooth Plane

144400809
112204: RNCC: 3 | RNVC: 2
0714 64 16: RNCC: 5 | RNVC: 2

11 Jul 1990

5110-33-204-8270
Pliers

332048270
62332: RNCC: 3 | RNVC: 2

8 Feb 2006

5110-14-256-7248
Rivet Cutter

142567248
TYPE25: RNCC: 3 | RNVC: 2
25: RNCC: 5 | RNVC: 9

1 Jan 1969

5110-15-074-6179
Hand File

150746179
10-107D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6308
Hand Reamer

150746308
14UNI525ACCLEGUTENS: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5858
Hand File

150745858
B150UNI5489: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-541-3252
Hand File

145413252
PAM.B250EM: RNCC: 3 | RNVC: 2

27 May 2004

5110-27-000-8163
Bolt Cutter

270008163
6815150200: RNCC: 2 | RNVC: 1
2350 16 0024: RNCC: 3 | RNVC: 2
2350 16 0024: RNCC: 5 | RNVC: 9

11 Jun 1991

5110-15-074-6048
Hand File

150746048
B250UNI5502B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-5940
Hand File

150745940
21-2D140UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-199-0804
Hand File

151990804
2600/3-12: RNCC: 3 | RNVC: 2
D2600/3-12: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-321-3693
Hand File

143213693
5110CDLIMEFRAISEUSEPLATE300BAT: RNCC: 2 | RNVC: 2
670-300: RNCC: 3 | RNVC: 2
2489-300: RNCC: 3 | RNVC: 2
4331-300: RNCC: 3 | RNVC: 9

1 Jan 1975

5110-15-009-8740
Hand File

150098740
2562/3/10: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-14-274-8094
Hand File

142748094
2411-180-2: RNCC: 3 | RNVC: 2
689-180-2: RNCC: 5 | RNVC: 2

1 Jan 1971

5110-14-429-3068
Hand Reamer

144293068
853-600-076-0: RNCC: 3 | RNVC: 2

11 Jan 1989

5110-15-179-5860
Nested Saws

151795860
15-140: RNCC: 3 | RNVC: 2

11 Apr 2007

5110-14-274-8307
Hand File

142748307
2406-180-4: RNCC: 3 | RNVC: 2
4474-180-4: RNCC: 3 | RNVC: 2
506-2-180: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-14-206-4186
Hand File

142064186
E75001LE250B: RNCC: 2 | RNVC: 2
0912250201: RNCC: 3 | RNVC: 2
912-250DD: RNCC: 3 | RNVC: 2
0912250204: RNCC: 3 | RNVC: 2
112-MID-250: RNCC: 3 | RNVC: 2

1 Jan 1964

5110-15-074-6072
Hand File

150746072
16INART101MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6566
Hand Reamer

150746566
1-5UNI524ACCIAI0ALCARB0NI0SPEC: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-427-1128
Hand Reamer

144271128
530704: RNCC: 3 | RNVC: 2

6 Oct 1988

5110-15-074-5945
Hand File

150745945
4D140UNI5670: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-378-2691
Bearing Scraper

143782691
50104: RNCC: 3 | RNVC: 2
501/4: RNCC: 5 | RNVC: 2

20 Jul 1982

5110-27-007-4255
Hand File Set

270074255
SAATCI EGE NO:2: RNCC: 2 | RNVC: 1
OZG078: RNCC: 2 | RNVC: 1
OZG07S: RNCC: 5 | RNVC: 2

10 Nov 1999

5110-14-210-5433
Hand File

142105433
NO PRIMARY REF14-210-5433: RNCC: 3 | RNVC: 2
LIMEAIGUILLE140C0UTEAU3: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-14-271-6145
Hand File

142716145
E75001LB100A: RNCC: 2 | RNVC: 2
0906100104: RNCC: 3 | RNVC: 2
102-BA-100: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-14-201-5373
Single Bit Ax

142015373
NO PRIMARY REF14-201-5373: RNCC: 3 | RNVC: 2
B0I2-311A: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-449-0838
Hand File

144490838
0950250204: RNCC: 3 | RNVC: 2
401-MD-250: RNCC: 3 | RNVC: 2

24 Jul 1991

5110-15-199-0811
Hand File

151990811
2601/1/10: RNCC: 3 | RNVC: 2
D2601/1-10: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-435-6224
Hand Reamer

144356224
E74112-45-5RS: RNCC: 2 | RNVC: 2
164-45-5: RNCC: 3 | RNVC: 2

14 Nov 1989

5110-15-230-4107
Hand Reamer

152304107
616/1-079: RNCC: 3 | RNVC: 2
513315E074537: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-14-488-4674
Hand Reamer

144884674
E66003-6,5RS: RNCC: 2 | RNVC: 2
168-6,5: RNCC: 3 | RNVC: 2
EXP-QC-TD-6,5: RNCC: 3 | RNVC: 2
EXPQCTD6-5: RNCC: 5 | RNVC: 2
168-6-5: RNCC: 5 | RNVC: 2

14 May 1997

5110-15-055-3580
Firmer Chisel

150553580
6052-15: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-477-7851
Pocket Knife

144777851
0.8863: RNCC: 3 | RNVC: 2
0.8863: RNCC: 5 | RNVC: 2
0.8863: RNCC: 5 | RNVC: 9
85-695-3109: RNCC: 6 | RNVC: 9
12-311-7103: RNCC: 6 | RNVC: 9

20 Sep 1995

5110-14-274-8358
Hand File

142748358
E75-002FENDANTE150BATARDE: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-14-455-0037
Bearing Scraper

144550037
851-190-016-0: RNCC: 3 | RNVC: 2

1 May 1992

5110-14-201-5289
Firmer Chisel

142015289
E73-201CISEAUDEMENUISIER25: RNCC: 2 | RNVC: 2
628-2LI0NS25: RNCC: 5 | RNVC: 2
628-25: RNCC: 5 | RNVC: 9
C111E25: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-204-8352
Hand File

142048352
E75001LF300C: RNCC: 2 | RNVC: 2
0604360: RNCC: 3 | RNVC: 2
0914300301: RNCC: 3 | RNVC: 2
914-300D: RNCC: 3 | RNVC: 2
RD.D300: RNCC: 5 | RNVC: 2
130334: RNCC: 5 | RNVC: 2
RDD300: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-14-200-8708
Adz

142008708
NO PRIMARY REF14-200-8708: RNCC: 3 | RNVC: 2
CHA2-332-100: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-27-018-5783
Bolt Cutter

270185783
5110-AM387-00001: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-055-3585
Turning Chisel

150553585
6062-28: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-237-9476
Hand Reamer

142379476
E66003-26RS: RNCC: 2 | RNVC: 2

1 Jan 1967

5110-14-435-0803
Hand Reamer

144350803
853-600-111-0: RNCC: 3 | RNVC: 2

18 Oct 1989

5110-14-344-1265
Hand Reamer

143441265
330A97-2404-55: RNCC: 3 | RNVC: 2

13 Jul 1977

5110-15-230-4106
Hand Reamer

152304106
616/1-084: RNCC: 3 | RNVC: 2
513315E074536: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-14-201-0474
Hand Reamer

142010474
R607-21X26: RNCC: 3 | RNVC: 2
3090-21-26: RNCC: 5 | RNVC: 2
30-01-21A26: RNCC: 5 | RNVC: 9
1-14-21A26: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-377-9456
Hand Hacksaw Blade

143779456
3806-10DENTS: RNCC: 3 | RNVC: 2

10 Jun 1982

5110-14-273-7336
Hand Reamer

142737336
E74111-23-3FS: RNCC: 2 | RNVC: 1

1 Jan 1971

5110-33-203-6095
File Handle

332036095
53 771-120: RNCC: 3 | RNVC: 2

12 Jun 2004

5110-14-201-0469
Hand Reamer

142010469
3090-0-10: RNCC: 3 | RNVC: 2
R607-9X10: RNCC: 3 | RNVC: 2
3090-9-10: RNCC: 5 | RNVC: 2
30-01-9A10: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-14-379-5092
Hand Wire Stripper

143795092
04140101000: RNCC: 3 | RNVC: 2
C35-9: RNCC: 3 | RNVC: 2
3597470079874: RNCC: 5 | RNVC: 2
414-11: RNCC: 5 | RNVC: 2
414101: RNCC: 5 | RNVC: 2
5011-30: RNCC: 5 | RNVC: 2

1 Oct 1982

5110-14-244-0902
Hand Reamer

142440902
NF E 66-003/20,5: RNCC: 2 | RNVC: 2
8040101-20,5: RNCC: 3 | RNVC: 2
E66-003-20,5: RNCC: 5 | RNVC: 2
E74104-20-5FS: RNCC: 5 | RNVC: 2
TKF8040101-20,5: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-14-344-1266
Hand Reamer

143441266
330A97-2404-56: RNCC: 3 | RNVC: 2

13 Jul 1977

5110-14-358-6822
Hand Reamer

143586822
NO PRIMARY REF14-358-6822: RNCC: 3 | RNVC: 2
E3396: RNCC: 5 | RNVC: 2
E3396: RNCC: 5 | RNVC: 9

7 Sep 1979

5110-33-103-9054
Hand File

331039054
350.011: RNCC: 3 | RNVC: 2

21 Jun 1995

5110-27-018-7559
Corner Bit Brace

270187559
901-ED-61: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-33-155-1296
Hand File

331551296
LIMA TRIANGULAR FINA 10": RNCC: 3 | RNVC: 2

13 Jun 1990

5110-27-058-8346
Hand Drill

270588346
MD-7755-0001/31: RNCC: 2 | RNVC: 1

11 Apr 2013

5110-14-276-3204
Hand Reamer

142763204
E74112-3RS: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-14-464-4968
Hand Reamer

144644968
854-600-035-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5110-14-380-6760
Hand Reamer

143806760
E74112-25-5RS: RNCC: 2 | RNVC: 2
20020-25-5: RNCC: 3 | RNVC: 2

29 Nov 1982

5110-14-201-0486
Hand File

142010486
NO PRIMARY REF14-201-0486: RNCC: 3 | RNVC: 2
2305: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-15-074-6077
Hand File

150746077
16INART101D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6621
Hand Reamer

150746621
3UNI532ACCIAI0CARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-7015
Turning Chisel

150747015
16ART102: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-529-4107
Hand File Set

145294107
AS.12LPB140T0: RNCC: 3 | RNVC: 2
3148516296801: RNCC: 5 | RNVC: 2

29 Mar 2002

5110-14-551-2507
Keyhole Saw

145512507
692 203 557 001: RNCC: 3 | RNVC: 2
511.902: RNCC: 5 | RNVC: 2

7 Sep 2006

5110-15-155-6081
Bow Saw

151556081
(241)A5682SEG.A.: RNCC: 3 | RNVC: 2
SEG.A.: RNCC: 3 | RNVC: 2

30 Apr 2002

5110-14-370-1104
Hand File Set

143701104
STG: RNCC: 3 | RNVC: 2
3148515192005: RNCC: 5 | RNVC: 2
91577063: RNCC: 5 | RNVC: 2
91634567: RNCC: 5 | RNVC: 2
130036: RNCC: 5 | RNVC: 2
0519200: RNCC: 5 | RNVC: 2

18 May 1981

5110-15-074-6066
Hand File

150746066
14INART101BASTARD0: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6655
Hand Reamer

150746655
20UNI532ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-196-9879
Hand File

151969879
PN UAS 00025764: RNCC: 3 | RNVC: 2
5110F76011915: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-33-156-6028
Hand Cable Stripper

331566028
790.106/V: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-33-103-9217
Hand File

331039217
360.251: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-33-103-9154
Hand Rasp

331039154
351.271: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-33-103-9179
Hand File

331039179
352.722: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-27-018-8181
Corner Bit Brace

270188181
901-LT-16: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-298-7835
Rip Hand Saw

142987835
NO PRIMARY REF14-298-7835: RNCC: 3 | RNVC: 2
6317VANALI0N55: RNCC: 5 | RNVC: 2
C317-60: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-15-123-7305
Hand Graver

151237305
32-3: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-050-6034
Hand File

150506034
D125UNI5487B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-074-6664
Hand Reamer

150746664
8UNI532ACCIAI0SUPERRAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-9027
Hand Reamer

150749027
26UNI525ACCSUPER: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-156-5804
Hand Cold Chisel

331565804
5210.025: RNCC: 3 | RNVC: 2
311.250: RNCC: 3 | RNVC: 2
50110: RNCC: 3 | RNVC: 2

18 Mar 1994

5110-33-103-9056
Hand File

331039056
350.013: RNCC: 3 | RNVC: 2

21 Jun 1995

5110-33-102-2118
Hand Cold Chisel

331022118
50106: RNCC: 3 | RNVC: 2

8 Nov 1990

5110-14-444-9195
Hand Wire Stripper

144449195
194.12: RNCC: 3 | RNVC: 2
W269325000024: RNCC: 5 | RNVC: 2
3148511449905: RNCC: 5 | RNVC: 2
1011892M00: RNCC: 5 | RNVC: 2
0144990: RNCC: 5 | RNVC: 9

28 Jan 1991

5110-15-074-5929
Hand File

150745929
D150UNI5498: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-244-0686
Hand Reamer

142440686
E74112-7,5: RNCC: 2 | RNVC: 2
20020-7,5: RNCC: 3 | RNVC: 2
R601-7,5: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-33-210-9899
Bolt Cutter

332109899
651.141: RNCC: 3 | RNVC: 2

2 May 2013

5110-15-054-4813
Hand Masonry Drill

150544813
59-3-702: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-280-1816
Hand File

142801816
E75001LH250B: RNCC: 4 | RNVC: 1

1 Jan 1971

5110-14-446-5644
File Handle

144465644
3: RNCC: 3 | RNVC: 2

26 Mar 1991

5110-15-074-5812
Hand File

150745812
B200UNI5493: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-052-6791
Hand File

150526791
D175UNI5494: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-074-6703
Hand Reamer

150746703
8-5UNI538ACCIAI0CARB0NI0SPECIALE: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-201-3836
Bolt Cutter

142013836
158-0: RNCC: 3 | RNVC: 2
4303-0: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-14-418-1687
Hand File

144181687
AIGCT100T2: RNCC: 3 | RNVC: 2
3148516311306: RNCC: 5 | RNVC: 2

6 Aug 1987

5110-15-074-6176
Hand File

150746176
14-107MEZZ0D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-528-8183
Bolt Cutter

145288183
158N4: RNCC: 3 | RNVC: 2
3272670297593: RNCC: 5 | RNVC: 2
SYQ0823: RNCC: 5 | RNVC: 2

19 Feb 2002

5110-14-306-1982
Circle Cutter

143061982
515: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-540-8536
Firmer Chisel

145408536
7011250201: RNCC: 3 | RNVC: 2
3303807011215: RNCC: 5 | RNVC: 2

23 Apr 2004

5110-14-393-0336
Hand Wire Stripper

143930336
172: RNCC: 3 | RNVC: 2

12 Apr 1984

5110-33-211-4760
Knife Blade

332114760
SPB-0003: RNCC: 3 | RNVC: 2

16 Nov 2013

5110-14-529-7420
Pocket Scissors

145297420
NO PRIMARY REF14-529-7420: RNCC: 3 | RNVC: 2
SYQ1372: RNCC: 5 | RNVC: 2
11597: RNCC: 5 | RNVC: 2

9 Apr 2002

5110-33-105-8798
Hand File

331058798
410709: RNCC: 3 | RNVC: 2

21 Nov 1997

5110-15-202-4313
Hand File

152024313
105.3278: RNCC: 3 | RNVC: 2
(241)A3648105.3278: RNCC: 5 | RNVC: 2

20 Mar 2007

5110-14-280-9746
Hand Reamer

142809746
E74108C13RS: RNCC: 2 | RNVC: 1

1 Jan 1971

5110-15-050-9079
Hand File

150509079
B250UNI5492B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-15-074-7153
Blacksmith's Chisel

150747153
2-5UNI4133U52WC20-2955: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-445-9127
Hand File

144459127
PAM.B300: RNCC: 3 | RNVC: 2
91618395: RNCC: 5 | RNVC: 2
3148516003003: RNCC: 5 | RNVC: 2
PAMB300: RNCC: 5 | RNVC: 2
0714 61 03: RNCC: 5 | RNVC: 2
0600300: RNCC: 5 | RNVC: 9

27 Feb 1991

5110-14-465-7504
Hand Reamer

144657504
851-600-531-0: RNCC: 3 | RNVC: 2

14 Oct 1993

5110-14-379-5090
Hand Wire Stripper

143795090
04140103000: RNCC: 3 | RNVC: 2
165W: RNCC: 3 | RNVC: 2
C35-7: RNCC: 3 | RNVC: 2
3597470079898: RNCC: 5 | RNVC: 2
414-13: RNCC: 5 | RNVC: 2
414103: RNCC: 5 | RNVC: 2

1 Oct 1982

5110-14-325-3428
Bearing Scraper

143253428
502-3: RNCC: 3 | RNVC: 2
4456-250: RNCC: 3 | RNVC: 9
50203: RNCC: 5 | RNVC: 2

2 Jul 1975

5110-14-287-8386
Tailor's Shears

142878386
NO PRIMARY REF14-287-8386: RNCC: 3 | RNVC: 2
21-1527: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-15-179-4959
Firmer Chisel

151794959
2-16-395: RNCC: 3 | RNVC: 2
00.07.69.90: RNCC: 5 | RNVC: 2

22 Jan 2007

5110-15-055-3638
Hand File

150553638
75UNI5516B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-33-106-1209
Crosscut Hand Saw

331061209
301007: RNCC: 3 | RNVC: 2

19 Mar 1997

5110-14-527-6421
Hand File

145276421
2403-FEUILLE DE SAUGE-LG140MM: RNCC: 3 | RNVC: 2
2403-LG140MM: RNCC: 5 | RNVC: 2

7 Nov 2001

5110-14-270-4004
Hand Reamer

142704004
E74104-56RS: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-556-1618
Scraper Blade

145561618
T120-BT1200: RNCC: 3 | RNVC: 2

6 Feb 2008

5110-33-155-1292
Hand File

331551292
LIMA REDONDA SEMI-FINA 10IN: RNCC: 3 | RNVC: 2

13 Jun 1990

5110-14-344-1268
Hand Reamer

143441268
330A97-2404-65: RNCC: 3 | RNVC: 2

13 Jul 1977

5110-27-018-5780
Bolt Cutter

270185780
5110-03072-00004: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-002-5221
Poising Saw

150025221
200003: RNCC: 3 | RNVC: 2
MR3461200F: RNCC: 5 | RNVC: 2

2 Sep 2013

5110-14-530-2985
Hand Rasp

145302985
RAB.RD250: RNCC: 3 | RNVC: 2
3148516263803: RNCC: 5 | RNVC: 2

29 May 2002

5110-15-054-4817
End Cutting Nippers

150544817
564-140: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-054-4806
Crosscut Hand Saw

150544806
56-5-296: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-074-6611
Hand Reamer

150746611
3UNI531ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-14-424-1950
Hand Rasp

144241950
E75001RB300C: RNCC: 2 | RNVC: 2
F300 0T 000 1123: RNCC: 6 | RNVC: 9

19 May 1988

5110-33-103-9157
Hand Rasp

331039157
351.281: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-14-274-8364
Hand File

142748364
E75-002FENDANTE250BATARDE: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-27-018-7566
Corner Bit Brace

270187566
901-FD-12: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-074-7033
Firmer Gouge

150747033
6ART112: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-009-8666
Hand File

150098666
2562/1/10: RNCC: 3 | RNVC: 2

25 Feb 1981

5110-15-074-6684
Hand Reamer

150746684
30-55UNI535ACCIAI0LEGAT0UTENSILI: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-074-6652
Hand Reamer

150746652
10UNI532ACCIAI0RAPID0: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-33-156-6030
Hand Cable Stripper

331566030
790.130: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-074-5839
Hand File

150745839
B350UNI5494B: RNCC: 2 | RNVC: 2

31 Dec 1975

5110-15-102-7429
Hand File Set

151027429
2637: RNCC: 3 | RNVC: 2

15 May 1987

5110-27-018-8534
Corner Bit Brace

270188534
901-DS-40: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-074-6538
Hand Reamer

150746538
40UNI525TAGLIENTIELICACCSUPERRA-: RNCC: 2 | RNVC: 1

31 Dec 1975

5110-15-050-9076
Hand File

150509076
1-2D200UNI5492B: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-27-034-4050
Hand Cold Chisel

270344050
16X28X250: RNCC: 2 | RNVC: 1

28 Dec 2006

5110-14-326-1096
Hand Reamer

143261096
E74112-19RS: RNCC: 2 | RNVC: 2

2 Jul 1975

5110-15-217-9812
Hand Graver

152179812
534-125: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-33-103-9170
Hand Rasp

331039170
351.472: RNCC: 3 | RNVC: 2

18 Sep 1996

5110-15-074-6136
Hand File

150746136
14-104D0LCE: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-338-3094
Firmer Chisel

143383094
E73-201CISEAUDESCULPTEUR16: RNCC: 2 | RNVC: 2
131-16: RNCC: 3 | RNVC: 2
4597-16: RNCC: 3 | RNVC: 9
862-2-16: RNCC: 5 | RNVC: 2
862-16: RNCC: 5 | RNVC: 9
C001E16: RNCC: 5 | RNVC: 9
C011E16: RNCC: 5 | RNVC: 9
3521-16: RNCC: 5 | RNVC: 9
381-19-16: RNCC: 5 | RNVC: 9

6 Nov 1976

5110-15-068-3824
Bearing Scraper

150683824
434001: RNCC: 3 | RNVC: 2

23 Sep 1983

Load More Results