What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 109 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 109of 112

5110-99-750-6038
Jig

997506038
A1154016: RNCC: 3 | RNVC: 2
MCA 2/3 G634: RNCC: 5 | RNVC: 2

22 Mar 2001

5110-12-309-0769
Hand File

123090769
2172101: RNCC: 3 | RNVC: 2
2172-100-1: RNCC: 5 | RNVC: 2

11 Dec 1986

5110-66-016-3484
Firmer Chisel

660163484
6 1-2IN X 1 1-4IN: RNCC: 3 | RNVC: 2
16-720: RNCC: 3 | RNVC: 2
16-136: RNCC: 5 | RNVC: 9
16-146: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-14-493-3532
Foret

144933532
NO PRIMARY REF14-493-3532: RNCC: 3 | RNVC: 2
222-11-8: RNCC: 5 | RNVC: 9
F300 0T 012 5465: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-99-137-5709
Trimming Knif Blade

991375709
6-11-921: RNCC: 3 | RNVC: 2
1992: RNCC: 5 | RNVC: 2
H7009: RNCC: 6 | RNVC: 9
1B1375709: RNCC: 6 | RNVC: 9
10-020: RNCC: 6 | RNVC: 9
H7009: RNCC: 6 | RNVC: 9
INTERLOCK: RNCC: 6 | RNVC: 9
99-848-2050: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-98-851-7353
Hand File

988517353
300MM 3-SQ 2ND CUT: RNCC: 3 | RNVC: 2
FA251D STUBS: RNCC: 6 | RNVC: 9

1 Dec 1976

5110-15-104-1006
Lima

151041006
2/20671-13.03.73-01: RNCC: 3 | RNVC: 2

30 May 1989

5110-15-216-4470
Cesoia Destra

152164470
ART-1110: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-17-115-3727
Pliers

171153727
3767H: RNCC: 3 | RNVC: 2

15 Jan 2003

5110-21-639-3135
End Cutting Nippers

216393135
167: RNCC: 3 | RNVC: 2
39GP16: RNCC: 4 | RNVC: 1
260-7C: RNCC: 5 | RNVC: 2
REVC: RNCC: 6 | RNVC: 9
5110-0881: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-66-150-0883
Crosscut Hand Saw

661500883
NO PRIMARY REF 66-150-0883: RNCC: 3 | RNVC: 2
04453459: RNCC: 5 | RNVC: 2

14 Apr 2003

5110-12-156-1652
Double Bow Cutting Punch

121561652
M179-22: RNCC: 3 | RNVC: 2
M179-22: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-131-3853
Firmer Chisel

121313853
DIN5139-B4GA: RNCC: 2 | RNVC: 2
00.07.35.56: RNCC: 5 | RNVC: 2
164-4: RNCC: 5 | RNVC: 9
B4DIN5139MG: RNCC: 5 | RNVC: 9
B4GADIN5139: RNCC: 5 | RNVC: 9
DIN5139B4GA: RNCC: 5 | RNVC: 9
5110-0024-1: RNCC: 5 | RNVC: 9
5110-024-1: RNCC: 5 | RNVC: 9
TL5110-0024-1: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-616-9724
Rip Hand Saw

226169724
PC-12-VEN: RNCC: 3 | RNVC: 2

16 Apr 2008

5110-14-519-3835
Hand Operated Wire Rope Cutter

145193835
996A-12: RNCC: 3 | RNVC: 2

15 Mar 2000

5110-12-131-3862
Firmer Chisel

121313862
DIN5139-B40GA: RNCC: 2 | RNVC: 2
164-40: RNCC: 5 | RNVC: 9
B40DIN5139MG: RNCC: 5 | RNVC: 9
B40GADIN5139: RNCC: 5 | RNVC: 9
DIN5139B40GA: RNCC: 5 | RNVC: 9
5110-0024-17: RNCC: 5 | RNVC: 9
5110-024-17: RNCC: 5 | RNVC: 9
TL5110-0024-17: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-123-7691
I Stampi Traforati

151237691
3679-1-150: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-310-0220
Hand Metal Stamping Die Set

123100220
TL5180-0146-030: RNCC: 2 | RNVC: 2
JD5110-12-310-0220: RNCC: 3 | RNVC: 2
5100259: RNCC: 5 | RNVC: 9
5100259: RNCC: 5 | RNVC: 9
TL5180-0146ZIFFERN 0-8: RNCC: 5 | RNVC: 9

31 Mar 1987

5110-98-104-7453
Hand Cold Chisel

981047453
NO PRIMARY REF 98-104-7453: RNCC: 3 | RNVC: 2
C-16: RNCC: 5 | RNVC: 2
232A: RNCC: 5 | RNVC: 2
1A-910-4195: RNCC: 5 | RNVC: 2
5110-99-910-4203: RNCC: 6 | RNVC: 9
5110-00-186-7107: RNCC: 6 | RNVC: 9
5110-99-910-4195: RNCC: 6 | RNVC: 9

10 Dec 1973

5110-27-010-6628
Hand File

270106628
99999-NIIN-DA0037190: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-99-120-0918

5110-12-122-2507
Hand Reamer

121222507
513A203HSS11-64: RNCC: 3 | RNVC: 2

30 May 1969

5110-22-612-4562
Single Bow Cutting Punch

226124562
71502: RNCC: 3 | RNVC: 2

12 Jan 2006

5110-25-100-6608
Knockout Punch And Die Set

251006608
7-8IN: RNCC: 5 | RNVC: 1

1 Jan 1984

5110-15-138-0800
Seghetto Con Lama

151380800
201001: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-162-2128

5110-19-005-1513
Pipe Cutter

190051513
44036/100: RNCC: 3 | RNVC: 2

24 Jun 2013

5110-27-010-6573
Hand File

270106573
99999-NIIN-DA0014438: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-13-103-0062
Docking Hand Saw

131030062
B572-65: RNCC: 3 | RNVC: 9

1 Apr 1975

5110-27-010-6696
Hand File

270106696
99999-NIIN-DA0037299: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-99-120-0885
Bolt Cutter

991200885
942F: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H515: RNCC: 6 | RNVC: 9
DL9A-H515: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-273-8242
Rabot A Dents

142738242
NO PRIMARY REF14-273-8242: RNCC: 3 | RNVC: 2
172: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-466-2644
End Cutting Nippers

144662644
851-200-101-0: RNCC: 3 | RNVC: 2

3 Nov 1993

5110-15-208-3789
Alesatore

152083789
3AAXFCFRDP7-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-017-5940
Bolt Cutter

660175940
NO PRIMARY REF 66-017-5940: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-15-208-4914
Alesatore

152084914
3AACPERMDN9-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-280-0777
Outil A Rayon

142800777
0793-78: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-21-876-2884
Hand Masonry Drill

218762884
SAFI: RNCC: 3 | RNVC: 1
5133-3312: RNCC: 6 | RNVC: 9

30 Aug 1977

5110-12-133-5836
Broad Hatchet

121335836
313-1107: RNCC: 3 | RNVC: 2
1404-1/2 BR: RNCC: 5 | RNVC: 2
5180-0021-7: RNCC: 5 | RNVC: 9
5180-021-7: RNCC: 5 | RNVC: 9
TL5180-0021-7: RNCC: 5 | RNVC: 9

30 May 1969

5110-98-107-7115
Hand Reamer

981077115
PARALLEL3/16X1-1/2X3IN.: RNCC: 3 | RNVC: 2

3 Feb 1984

5110-17-015-5943
Hand File

170155943
TVA5110-2-263-005-1.1.36: RNCC: 3 | RNVC: 2
TVA5110-2-263-005: RNCC: 5 | RNVC: 1
003690: RNCC: 5 | RNVC: 2
12700601: RNCC: 5 | RNVC: 2
327.501: RNCC: 5 | RNVC: 2
327.501: RNCC: 5 | RNVC: 9

17 Jun 1972

5110-14-232-9202
Alesoir A Rallonge

142329202
51739: RNCC: 3 | RNVC: 2

1 Jan 1967

5110-22-624-4458
Bent Trimmers Shears

226244458
90821V: RNCC: 3 | RNVC: 2
8.0908.21L: RNCC: 3 | RNVC: 2

9 Oct 2012

5110-15-175-9011
Scalpello Smussato

151759011
5209G-6: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-219-4706
Prolunga

152194706
VP20SL: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-175-7422
Tronchese Antiscin

151757422
0661600: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-105-9133
Sarto Forbici

151059133
2/20690-20.03.69-US-01: RNCC: 3 | RNVC: 2

30 May 1989

5110-99-727-0608

5110-21-893-1053
Hand Reamer

218931053
18-10013: RNCC: 3 | RNVC: 2
4600: RNCC: 5 | RNVC: 1

14 May 1983

5110-12-155-9400
Hand Cape Chisel

121559400
NM249-02: RNCC: 3 | RNVC: 2
NM249-02: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-132-2410
Reamer Blade Set

121322410
101.15.400: RNCC: 3 | RNVC: 2
101-15-400: RNCC: 5 | RNVC: 2
800-21HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-637-5407
Hand Reamer

216375407
B174-2: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
712-049014: RNCC: 3 | RNVC: 2
B5-14: RNCC: 4 | RNVC: 1
50-10963: RNCC: 5 | RNVC: 9

4 Jun 1968

5110-15-236-1047
Pinze E Tronchesi 3

152361047
248-1798: RNCC: 3 | RNVC: 2
511015E143172: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-13-119-8154
Bearing Scraper Set

131198154
SHAVIV SET E: RNCC: 3 | RNVC: 2
02.20.31.12: RNCC: 5 | RNVC: 2
3SE-I: RNCC: 5 | RNVC: 2

25 May 2007

5110-22-614-6612
Hand Reamer

226146612
F1352,6,76MM DIN 212 FORM B/D: RNCC: 3 | RNVC: 2

8 Jan 2007

5110-15-215-0717
Lama Per Sega

152150717
D2726/3: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-210-7960
Lima Triangolo Sott

152107960
ART1430/5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-434-7348
Wood Carving Gouge

994347348
DEF STAN 51-11:PART 27: RNCC: 4 | RNVC: 1
F1FA2013: RNCC: 6 | RNVC: 9

23 Nov 1982

5110-17-701-5888
Trek Zaag

177015888
E311200: RNCC: 3 | RNVC: 2

14 May 1970

5110-66-010-7936
Adjustab Blade Set

660107936
MICR0SETBLADESETE: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-99-846-2006
Bolt Cutter

5110-66-014-4787
Hand File

660144787
911748: RNCC: 3 | RNVC: 2
1-230-06-2-3: RNCC: 5 | RNVC: 2
R0UNDFILE: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-20-002-8029
Hand Operated Wire Rope Cutter

200028029
PWC54365: RNCC: 3 | RNVC: 2

22 Jun 2006

5110-14-264-4810

5110-99-924-4386
Boiler Tube Scraper

999244386
NO PRIMARY REF 99-924-4386: RNCC: 3 | RNVC: 2
0476-244: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-99-910-4981
Hand File

999104981
C00RDPATH4006: RNCC: 2 | RNVC: 2
H20292: RNCC: 5 | RNVC: 2
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
FA13420: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-5293
Cable Strippi Knife

999105293
NO PRIMARY REF 99-910-5293: RNCC: 3 | RNVC: 2
H1530: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-12-309-3542
Hand Reamer

123093542
DIN206-B4,9H11-HSS: RNCC: 2 | RNVC: 2

19 Jan 1987

5110-99-747-3654
Deburri Subassembly

997473654
D9851-14: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-21-105-2017
Double Bow Cutting Punch

211052017
149: RNCC: 3 | RNVC: 1
27: RNCC: 3 | RNVC: 1
5110-0949: RNCC: 6 | RNVC: 9

4 Jun 1968

5110-99-402-0347
Valve Vacuu Grinder

994020347
NO PRIMARY REF 99-402-0347: RNCC: 3 | RNVC: 2
18G29: RNCC: 5 | RNVC: 2
143N: RNCC: 5 | RNVC: 9
16C2002: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-17-015-5857
Hand File

170155857
TVA5110-2-263-005-1.1.44: RNCC: 3 | RNVC: 2
TVA5110-2-263-005: RNCC: 5 | RNVC: 1
FIFA13617: RNCC: 6 | RNVC: 9

17 Jun 1972

5110-12-129-3921
Hand Reamer

121293921
DIN859-B9,5-HSS: RNCC: 2 | RNVC: 2
415-9,50: RNCC: 3 | RNVC: 2
11606999-9,5: RNCC: 3 | RNVC: 2
011011-9,5: RNCC: 3 | RNVC: 2
513A204HSS9-5SPIRALGENUTET: RNCC: 5 | RNVC: 9
9-5DIN859SCHNELLARBEITSSTAHLSPI-: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-849-8182
Hand File

218498182
39GP30: RNCC: 4 | RNVC: 1
5110-0519: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-12-310-1251
Sealing Surface Milling Cutter

123101251
001-218.000-000W50: RNCC: 2 | RNVC: 2
001-218.000-000W50: RNCC: 3 | RNVC: 2

9 Apr 1987

5110-99-718-9266
Valve Seat Cutter

997189266
PD317-30: RNCC: 3 | RNVC: 2

5 Dec 1979

5110-98-105-8685
Hand Reamer

981058685
NO PRIMARY REF 98-105-8685: RNCC: 3 | RNVC: 2
METRIC 2050-3.0: RNCC: 5 | RNVC: 2

18 May 1978

5110-99-033-3502
Tapere Bastard File

990333502
NO PRIMARY REF 99-033-3502: RNCC: 3 | RNVC: 2
37-50010: RNCC: 5 | RNVC: 2

11 Dec 1995

5110-15-217-9629
Lama Taglierina

152179629
T5-200X1-8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-843-5018
Hand Hacksaw Frame

218435018
20T: RNCC: 3 | RNVC: 2
MASTER CUT III: RNCC: 3 | RNVC: 2
1414: RNCC: 3 | RNVC: 2
58-5530: RNCC: 3 | RNVC: 2
GGGF671: RNCC: 4 | RNVC: 1
13-505: RNCC: 5 | RNVC: 9
REVB: RNCC: 5 | RNVC: 9

4 Jun 1968

5110-12-165-5336
Bent Trimmers Shears

121655336
NO PRIMARY REF 12-165-5336: RNCC: 3 | RNVC: 2
R1809 1-2: RNCC: 5 | RNVC: 9

25 May 1976

5110-99-779-0832
Hand Reamer

997790832
NO PRIMARY REF 99-779-0832: RNCC: 3 | RNVC: 2
TS524: RNCC: 5 | RNVC: 2
FJ1931-1: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-127-7382
Single Bow Cutting Punch

121277382
DIN7200-B10: RNCC: 2 | RNVC: 2
B10DIN7200: RNCC: 5 | RNVC: 2
DIN7200B10: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-134-5379
Alesatore Acciaio A

151345379
4520-27: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-22-609-7751
Bolt Cutter

226097751
4323062045: RNCC: 3 | RNVC: 2

28 Feb 2005

5110-15-125-1301
Scalpello In Acciai

151251301
3606-400: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-291-8130

5110-21-807-1388
Dimpling Punch

218071388
4G200M2: RNCC: 3 | RNVC: 2

4 Jun 1968

5110-14-319-6043
Contre-Fer De Rabot

143196043
NO PRIMARY REF14-319-6043: RNCC: 3 | RNVC: 2
1100-42: RNCC: 5 | RNVC: 2
1100-42: RNCC: 5 | RNVC: 9

1 Jan 1975

5110-12-137-9470
Hand Metal Stamping Die Set

121379470
3785-2-5: RNCC: 3 | RNVC: 2
56930025: RNCC: 5 | RNVC: 9
SATZARAB2-5DIN7353: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-220-2349
Cesoia Per Lamiera

152202349
MODEL3S-4L: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-425-2949
Enginee Scraper Set

994252949
NO PRIMARY REF 99-425-2949: RNCC: 3 | RNVC: 2
CSAS440SH1-2: RNCC: 5 | RNVC: 2
633452: RNCC: 6 | RNVC: 9

19 Mar 1990

5110-25-148-1166
Diagonal Cutting Pliers

251481166
4130: RNCC: 3 | RNVC: 2
3144-019-1: RNCC: 5 | RNVC: 2
4130: RNCC: 5 | RNVC: 2

19 May 1999

5110-17-701-5784
Hand File

177015784
NO PRIMARY REF 17-701-5784: RNCC: 3 | RNVC: 2

14 May 1970

5110-41-002-1698
Hand Metal Cutting Shears

410021698
NO PRIMARY REF 41-002-1698: RNCC: 3 | RNVC: 2
167030779: RNCC: 5 | RNVC: 2

13 Feb 2013

5110-15-214-9933
Impugnatura Portala

152149933
2797/2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-231-0401
Cesoia Tagliacavo

152310401
VBW354-BIS1,2M/M: RNCC: 3 | RNVC: 2

19 Jul 2007

5110-27-044-0867
Maket Bicak

270440867
J46-03: RNCC: 2 | RNVC: 1

6 Jan 2009

5110-66-013-2977
Hand Drill

660132977
03-803: RNCC: 3 | RNVC: 1
GC035-83: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-12-121-4360
Firmer Gouge

121214360
DIN5142-B18GA: RNCC: 2 | RNVC: 2
B18GADIN5142: RNCC: 5 | RNVC: 2
DIN5142B18GA: RNCC: 5 | RNVC: 9
5110-0024-29: RNCC: 5 | RNVC: 9
TL5110-0024-29: RNCC: 5 | RNVC: 9
5110-024-29: RNCC: 5 | RNVC: 9

30 May 1969

5110-17-111-6577
Chain Drill Attachment

171116577
PM4110-1520: RNCC: 3 | RNVC: 2

10 Mar 1998

5110-12-309-2888
Hand Reamer

123092888
8,82X12,741HSS: RNCC: 3 | RNVC: 2

9 Jan 1987

5110-98-205-9149
Drill Socket

982059149
HB 14-DRILL SOCKET: RNCC: 3 | RNVC: 2

28 Aug 2003

5110-15-213-3253
Raspa Piatta Parall

152133253
6-344-08-2-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-182-2086
Hand Wire Stripper

121822086
169276-0: RNCC: 3 | RNVC: 2
169276: RNCC: 5 | RNVC: 2

18 Jan 1980

5110-99-736-8037
Installation Kit

997368037
FV2272945: RNCC: 3 | RNVC: 2
06650-003: RNCC: 6 | RNVC: 9

8 Jan 2007

5110-99-784-7238
Wire Wrap Head

997847238
CSWB-11: RNCC: 3 | RNVC: 2
01-5003: RNCC: 5 | RNVC: 2
IM2090: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-98-852-6844
Metal Cutting Hand Saw

988526844
NO PRIMARY REF 98-852-6844: RNCC: 3 | RNVC: 2
ER152.10: RNCC: 5 | RNVC: 2

5 Sep 1977

5110-21-637-5397
Hand Reamer

216375397
B94-2: RNCC: 3 | RNVC: 1
1613: RNCC: 3 | RNVC: 1
712-048719: RNCC: 3 | RNVC: 2
B5-14: RNCC: 4 | RNVC: 1
GGGR180: RNCC: 4 | RNVC: 1
B174-2: RNCC: 5 | RNVC: 2
50-10958: RNCC: 5 | RNVC: 9

4 Jun 1968

5110-98-107-7151
Hand Reamer

981077151
PARALLEL3/4X4X8IN.: RNCC: 3 | RNVC: 2

9 Feb 1984

5110-14-262-8130
Tariere Torse A Vis

142628130
12-4-36: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-98-206-1640
Bolt Cutter

982061640
DFAMPD04177: RNCC: 2 | RNVC: 2

12 Nov 2004

5110-12-301-8753
Hand Reamer

123018753
DIN206-B2,8-HSS: RNCC: 2 | RNVC: 2

14 Nov 1984

5110-12-177-7524
Messerhalter

121777524
745010: RNCC: 3 | RNVC: 9
745-1: RNCC: 5 | RNVC: 9

16 Feb 1979

5110-22-121-0411
Diagonal Cutting Pliers

221210411
601-165 BECU: RNCC: 3 | RNVC: 2

14 Jul 1989

5110-21-849-8184
Hand File

218498184
39GP30: RNCC: 4 | RNVC: 1
5110-0514: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-17-701-5807
Hand File

177015807
NO PRIMARY REF 17-701-5807: RNCC: 3 | RNVC: 2

15 May 1970

5110-12-148-5992
Reamer Blade Set

121485992
NO PRIMARY REF 12-148-5992: RNCC: 3 | RNVC: 2
101426: RNCC: 5 | RNVC: 9

30 May 1969

5110-98-107-7178
Hand Reamer

981077178
PARALLEL1-11/32X6-1/2X13IN.: RNCC: 3 | RNVC: 2

13 Feb 1984

5110-21-639-6352
Combi Knife And Saw

216396352
CDADIDUNIT6-2-4: RNCC: 3 | RNVC: 2
UNIT6-2-4: RNCC: 4 | RNVC: 1
UNIT6-2-4: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-21-893-1366
Swivel Cutter

218931366
444-2: RNCC: 3 | RNVC: 2

7 Aug 1983

5110-21-887-7408
Single Bit Ax

218877408
SA1-1/4: RNCC: 3 | RNVC: 2

18 Dec 1981

5110-99-466-0095
Large Crash Axe

994660095
GM10377: RNCC: 3 | RNVC: 2
MR1GM10377R: RNCC: 6 | RNVC: 9
CSDEGM10377: RNCC: 6 | RNVC: 9
1A4402: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-849-9087
Ship Scraper

218499087
5110-1117: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-13-102-8910
Hand Reamer

131028910
NBN485H8-11-5CS: RNCC: 2 | RNVC: 2

1 Apr 1975

5110-12-122-2526
Hand Reamer

121222526
513A103SS9-16: RNCC: 3 | RNVC: 2

30 May 1969

5110-15-134-3739
Coltello Per Elettr

151343739
406-190: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-22-600-1763
End Cutting Nippers

226001763
2101G-160: RNCC: 3 | RNVC: 2
5735011178: RNCC: 3 | RNVC: 2
2101G-160: RNCC: 3 | RNVC: 2
91.2550.01.758: RNCC: 5 | RNVC: 2
2101G-160: RNCC: 5 | RNVC: 2

6 Jun 2002

5110-15-123-2240
Scalpello Nervato M

151232240
35-200X25-0: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-66-156-7239
Hand Operated Cable Cutter

661567239
MSS-S20M-PEL1450: RNCC: 3 | RNVC: 2

7 Mar 2008

5110-66-149-7534
Hand File

661497534
NO PRIMARY REF 66-149-7534: RNCC: 3 | RNVC: 2
07083606: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-99-206-1405
Ru Removal Tool Kit

992061405
NO PRIMARY REF 99-206-1405: RNCC: 3 | RNVC: 2
S1021-6: RNCC: 5 | RNVC: 2
3A4525: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-439-4417
Hand File

994394417
BS498PT1: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
F1FA13270: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-214-4454
Alesatore C.S. Da 1

152144454
040-17.5/19.5: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-169-8698
Lime A Ferro

151698698
F72019376: RNCC: 3 | RNVC: 2

5 Nov 2002

5110-15-213-8248
Seghette A Mano Lam

152138248
2-15-558: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-176-6348
Scalpello Leggero I

151766348
026-0300: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-12-353-2593
Paper Cutter

123532593
4115: RNCC: 3 | RNVC: 2
PROFI CUT 3: RNCC: 5 | RNVC: 2

23 Feb 2001

5110-66-155-5162
File Holder

661555162
38277: RNCC: 3 | RNVC: 2
38277: RNCC: 5 | RNVC: 2

4 Apr 2007

5110-12-171-6062
Hand Masonry Drill

121716062
299-12-400: RNCC: 3 | RNVC: 9
6871-12-400: RNCC: 5 | RNVC: 9

26 Oct 1977

5110-99-910-5662
Tinner's Hollow Cutting Punch

999105662
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 6 | RNVC: 9
DL9A-H2025: RNCC: 6 | RNVC: 9
H2025: RNCC: 6 | RNVC: 9
F1FA16068: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-131-4714
Hand Reamer

121314714
131.29.000: RNCC: 3 | RNVC: 2
131-29-000: RNCC: 5 | RNVC: 2
700-7HC: RNCC: 5 | RNVC: 2

30 May 1969

5110-17-015-2709
Rigid Handle Machete

170152709
NO PRIMARY REF 17-015-2709: RNCC: 3 | RNVC: 2

17 Jun 1972

5110-12-370-9337
Brick Chisel

123709337
385 050 1: RNCC: 3 | RNVC: 2
103-50: RNCC: 3 | RNVC: 2
00.06.95.16: RNCC: 5 | RNVC: 2
8723420: RNCC: 5 | RNVC: 2

17 Jan 2007

5110-14-265-9716
Burin Pour Rubans D

142659716
VTR200-1096: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-25-102-9904
Hand File

251029904
14SBF5110HVK2: RNCC: 2 | RNVC: 1
FS 5110-0641 POS 1: RNCC: 2 | RNVC: 2
329DA: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-21-896-7625
Paper Cutter

218967625
553: RNCC: 3 | RNVC: 2
11991-03180: RNCC: 5 | RNVC: 2
00553: RNCC: 5 | RNVC: 2
BH72180-93: RNCC: 5 | RNVC: 9

4 Feb 1985

5110-21-639-4258
Hand File

216394258
39GP30: RNCC: 4 | RNVC: 1
5110-0372: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-98-104-4691
Sheet Metal Ripping Cutter

981044691
NO PRIMARY REF 98-104-4691: RNCC: 3 | RNVC: 2
1960: RNCC: 5 | RNVC: 2

25 May 1973

5110-21-860-8527
Spud

218608527
227: RNCC: 3 | RNVC: 2
5110-1203: RNCC: 6 | RNVC: 9

15 Apr 1971

5110-12-122-2535
Hand Reamer

121222535
513A103SS23-32: RNCC: 3 | RNVC: 2

30 May 1969

5110-22-618-1404
Pocket Scissors

226181404
7087-0190: RNCC: 3 | RNVC: 2

22 Oct 2008

5110-22-606-6721
Bolt Cutter

226066721
4559-18: RNCC: 3 | RNVC: 2

13 Mar 2004

5110-13-108-2889
Dressmakers Ripper

131082889
643-0500: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-41-000-1531
Gimlet

410001531
7569-017: RNCC: 3 | RNVC: 2

17 Aug 2006

5110-15-184-7339
Bedano Da Falegname

151847339
3QANFLM2: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-054-1385
Bucksaw

150541385
56-5-575-600: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-213-6662
Kit Montaggio Inser

152136662
SRM0407D: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-165-4023
Cesoia

151654023
HL9ACP: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-66-013-6866
Hand File

660136866
HANDFILE: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-33-108-5887
End Cutting Nippers

331085887
70666-250: RNCC: 3 | RNVC: 2

30 Apr 2001

5110-14-324-7005
Double Bow Cutting Punch

143247005
214-39: RNCC: 3 | RNVC: 2
376-39: RNCC: 3 | RNVC: 2
4638-39: RNCC: 5 | RNVC: 9
345-11-39: RNCC: 5 | RNVC: 9
214-39: RNCC: 5 | RNVC: 9

1 Jan 1975

5110-15-104-3893
Machete A Serramani

151043893
5509/1962-39: RNCC: 3 | RNVC: 2

30 May 1989

5110-12-126-1515
Hand Reamer

121261515
NO PRIMARY REF 12-126-1515: RNCC: 3 | RNVC: 2
21-5DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-150-2133
Hand Hacksaw Blade

661502133
NO PRIMARY REF 66-150-2133: RNCC: 3 | RNVC: 2
06900609: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-66-150-2980
Hand Metal Stamping Die Set

661502980
NO PRIMARY REF 66-150-2980: RNCC: 3 | RNVC: 2
06931500: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-15-186-5460
Punzone Per Stampig

151865460
ART-3689: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-126-1901
Cutting Punch Insert

121261901
TL5110-0033-A4: RNCC: 2 | RNVC: 2
8120: RNCC: 3 | RNVC: 2
1120: RNCC: 5 | RNVC: 9
1008: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-173-7403
Hand Cold Chisel

121737403
C3640-300: RNCC: 3 | RNVC: 2
107462: RNCC: 5 | RNVC: 2

5 May 1978

5110-98-104-1771
Tube Cutter

981041771
RIDGID NO 10: RNCC: 3 | RNVC: 2
RIDGID NO 10: RNCC: 5 | RNVC: 9
5110-99-127-7891: RNCC: 6 | RNVC: 9

1 Jun 1990

5110-15-165-3792
Lima Per Meccanica

151653792
256015: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-3917
Utensile Da Tornio

151653917
7772212: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-27-010-6676
Hand File

270106676
99999-NIIN-DA0037178: RNCC: 2 | RNVC: 1
UC KOSE 4": RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-186-0894
Lame Di Ricambio Co

151860894
220AR-10PZ: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-25-119-8161
Plastkabel Kniv

251198161
649086: RNCC: 3 | RNVC: 2
LA7-5746: RNCC: 3 | RNVC: 2
LE766: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-14-249-8320
Blacksmith's Chisel

142498320
0007150301: RNCC: 3 | RNVC: 2
M0B7-46EC: RNCC: 3 | RNVC: 2
3843-46EMMANCHE: RNCC: 3 | RNVC: 9
SYQ0696: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-15-186-0911
Lama Per Filettare

151860911
9732G-20: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-14-310-4957
Poincon Decoupage

143104957
568-4-4: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-99-812-3654
F Cutter And Holder

998123654
EMT192: RNCC: 3 | RNVC: 2
LV3RREMT192: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-25-149-9044
Craftsman's Knife

251499044
91280107: RNCC: 3 | RNVC: 2

13 May 2003

5110-22-303-5701

5110-14-308-5694
End Cutting Nippers

143085694
E73-111-200: RNCC: 2 | RNVC: 2
228-20: RNCC: 3 | RNVC: 2
188-20CH: RNCC: 3 | RNVC: 2
190-20: RNCC: 5 | RNVC: 2
190-20CP: RNCC: 5 | RNVC: 2
190.20CP: RNCC: 5 | RNVC: 2
3272670253841: RNCC: 5 | RNVC: 2

1 Jan 1974

5110-12-141-1195
Hand Reamer

121411195
DIN859-B7,5-HSS: RNCC: 2 | RNVC: 2
415-7,50: RNCC: 3 | RNVC: 2
11606999-7,5: RNCC: 3 | RNVC: 2
011011-7,5: RNCC: 3 | RNVC: 2
7-5DIN859SCHNELLARBEITSSTAHLSPI-: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-267-4788
Single Bow Cutting Punch

142674788
213-8: RNCC: 3 | RNVC: 2
8017080001: RNCC: 3 | RNVC: 2
SYQ0844: RNCC: 5 | RNVC: 2
345-10-8: RNCC: 5 | RNVC: 9
375-8: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-22-610-1768
Hand File

226101768
1-210-10-2-2: RNCC: 3 | RNVC: 2

15 Apr 2005

5110-99-122-1860
Engineers File

991221860
NO PRIMARY REF 99-122-1860: RNCC: 3 | RNVC: 2
H6412: RNCC: 5 | RNVC: 2
FILEMASTER: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-15-199-0866
Scalpello Di Rame

151990866
7250-250: RNCC: 3 | RNVC: 2
M7250-250: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-304-1793
Glass Cutter

143041793
67RL08-096-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-13-107-9908
Rigid Handle Machete

131079908
607-5021: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-66-028-5393
Electricians' Scissors

660285393
RE1200-26: RNCC: 3 | RNVC: 2
MACD0NALD100: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-66-150-1890
Hand Hacksaw Frame

661501890
NO PRIMARY REF 66-150-1890: RNCC: 3 | RNVC: 2
03651210: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-15-237-6103
Tronchesina

152376103
TR-5000: RNCC: 3 | RNVC: 2
511015E092002: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-17-701-3790
Scraping Knife

177013790
NO PRIMARY REF 17-701-3790: RNCC: 3 | RNVC: 2

16 May 1970

5110-15-136-2461
Forbici Da Elettric

151362461
2176-2: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-21-849-7192
Bolt Cutter

218497192
MS16888-1: RNCC: 2 | RNVC: 2
0090MNE: RNCC: 3 | RNVC: 2
18KC: RNCC: 3 | RNVC: 2
7118: RNCC: 5 | RNVC: 2
C18F: RNCC: 5 | RNVC: 2
14-12NE: RNCC: 5 | RNVC: 2
090NE: RNCC: 5 | RNVC: 9
5110-0212: RNCC: 5 | RNVC: 9
09NE: RNCC: 5 | RNVC: 9
090NE: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-99-722-2613
Valve Seat Cutter S

997222613
MS73B: RNCC: 3 | RNVC: 2
892/00208: RNCC: 5 | RNVC: 2
21825064: RNCC: 6 | RNVC: 9
MS73: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-571-3208
Line Cutter

145713208
991545: RNCC: 3 | RNVC: 9

14 Mar 2012

5110-15-136-3944
Lama Intercambiabil

151363944
140078: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-12-131-4710
Hand Reamer

121314710
131.15.000: RNCC: 3 | RNVC: 2
131-15-000: RNCC: 5 | RNVC: 2
700-3HC: RNCC: 5 | RNVC: 2

30 May 1969

5110-12-301-5564
Diagonal Cutting Pliers

123015564
NO PRIMARY REF 12-301-5564: RNCC: 3 | RNVC: 2
156H10: RNCC: 5 | RNVC: 9
156H-LNP-10: RNCC: 5 | RNVC: 9
156H-LNP-260: RNCC: 5 | RNVC: 9
222992: RNCC: 5 | RNVC: 9

24 Oct 1984

5110-15-214-1752
Stampi Traforati Mm

152141752
K3679-1-30: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-150-2122
Hand Hacksaw Blade

661502122
NO PRIMARY REF 66-150-2122: RNCC: 3 | RNVC: 2
07646108: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-14-393-0392
Hand Metal Stamping Die Set

143930392
1-01-25-100: RNCC: 3 | RNVC: 2

12 Apr 1984

5110-21-637-7626
Hand Reamer Set

216377626
50-11129T050-11134: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-199-0752
Double Bow Cutting Punch

151990752
3703-18: RNCC: 3 | RNVC: 2
C3703-18: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-12-309-3539
Hand Reamer

123093539
DIN206-B3,96H8-HSS: RNCC: 2 | RNVC: 2

19 Jan 1987

5110-12-320-4438
Hand File Set

123204438
53760-14: RNCC: 3 | RNVC: 2
2100142: RNCC: 3 | RNVC: 2
537600-140: RNCC: 3 | RNVC: 2
537600-140/1: RNCC: 3 | RNVC: 2
53760-140: RNCC: 5 | RNVC: 2
53760-140: RNCC: 5 | RNVC: 9

16 Jan 1990

5110-99-434-7341
Woodcarving Chisel

994347341
21: RNCC: 3 | RNVC: 1
DEF STAN 51-11:PART 27: RNCC: 4 | RNVC: 1
F1FA20128: RNCC: 6 | RNVC: 9
F1FA20128: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-121-3325
Gimlet

121213325
DIN6464-10X160: RNCC: 2 | RNVC: 2
10X160DIN6464: RNCC: 5 | RNVC: 2

30 May 1969

5110-15-165-4132
Lima Ad Ago 160 Mm.

151654132
1720012: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-208-0220
Universal Tool Kit

152080220
FTB1010 3205007-1: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-125-6459
Sbavatore Doppio Pe

151256459
769/5: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-213-6714
Couteau Pour Pince

142136714
401128-00: RNCC: 3 | RNVC: 2
401-128: RNCC: 5 | RNVC: 2
C0UTEAUEP0URPINCE4010: RNCC: 5 | RNVC: 2
E: RNCC: 5 | RNVC: 2

1 Jan 1964

5110-15-192-8619
Lama Per Cutter (Co

151928619
LCB-30-50: RNCC: 3 | RNVC: 2

26 Mar 2010

5110-99-428-9645
Hand Reamer

994289645
BS122: RNCC: 4 | RNVC: 1
F1FA16340: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-944-8526
Diagonal Cutting Pliers

999448526
BS3087-16: RNCC: 2 | RNVC: 2
PW773-61N: RNCC: 3 | RNVC: 2
BS3087: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-98-107-7136
Hand Reamer

981077136
PARALLEL33/64X3X6IN.: RNCC: 3 | RNVC: 2

8 Feb 1984

5110-21-889-5413
Compass Saw Blade

218895413
D-689: RNCC: 3 | RNVC: 2
D689: RNCC: 5 | RNVC: 2

14 Jun 1982

5110-99-728-1560
Tube Expander

997281560
GA5026/1: RNCC: 3 | RNVC: 2
5026/1: RNCC: 5 | RNVC: 2
5026: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-126-1737
Woodcarving Gouge

121261737
NO PRIMARY REF 12-126-1737: RNCC: 3 | RNVC: 2
2573-1-8MM: RNCC: 5 | RNVC: 9
5110-0024-38: RNCC: 5 | RNVC: 9
5110-024-38: RNCC: 5 | RNVC: 9
TL5110-0024-38: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-221-9299
Sgorbia Per Legno S

152219299
422-12: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-013-5245
Hand Hacksaw Frame

660135245
15-150: RNCC: 3 | RNVC: 2
27705: RNCC: 3 | RNVC: 2
DEF(AUST)5801: RNCC: 4 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
20T: RNCC: 5 | RNVC: 2
0745 2509: RNCC: 5 | RNVC: 2
ER106: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-12-334-6367
Knife Blade

123346367
21SC: RNCC: 3 | RNVC: 2
2121: RNCC: 5 | RNVC: 2

1 Jun 1994

5110-99-568-6121
Hand Operated Cable Cutter

995686121
TL-502-146: RNCC: 3 | RNVC: 2

28 Nov 2007

5110-66-150-3873
Bolt Cutter Jaws

661503873
NO PRIMARY REF 66-150-3873: RNCC: 3 | RNVC: 2
07141506: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-21-637-5820
Hand Reamer

216375820
B174-2: RNCC: 3 | RNVC: 1
4551: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1
4551: RNCC: 5 | RNVC: 1

6 Jun 1968

5110-15-055-3587
Bucksaw

150553587
56-5-552: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-21-851-2538
Rip Hand Saw

218512538
MS16324-1: RNCC: 2 | RNVC: 2
D8: RNCC: 3 | RNVC: 1
46-GP-4: RNCC: 4 | RNVC: 1
GGGS65: RNCC: 5 | RNVC: 1
5110-1061: RNCC: 5 | RNVC: 9

6 Oct 1968

5110-22-616-8348
Hand File Set

226168348
LX5589-10-2: RNCC: 3 | RNVC: 2

12 Mar 2008

5110-17-120-5745
File Handle

171205745
PH 09/100: RNCC: 3 | RNVC: 2
4007220301906: RNCC: 5 | RNVC: 2

28 Jun 2007

5110-17-701-5685
Hand File

177015685
NO PRIMARY REF 17-701-5685: RNCC: 3 | RNVC: 2

14 May 1970

5110-37-180-0937
Double Bla Hand Saw

371800937
KS-B-3150: RNCC: 2 | RNVC: 2
ROK MIL SPEC 5180-0001: RNCC: 2 | RNVC: 2
5180-0001-2: RNCC: 3 | RNVC: 2
5180-0001: RNCC: 3 | RNVC: 2
KSB3150: RNCC: 3 | RNVC: 2
5110-97-180-0937: RNCC: 5 | RNVC: 9

5 Mar 1990

5110-99-925-1259
Hand Metal Cutting Shears

999251259
NO PRIMARY REF 99-925-1259: RNCC: 3 | RNVC: 2
KT-103-118: RNCC: 5 | RNVC: 2

26 Jun 2012

5110-98-107-7116
Hand Reamer

981077116
PARALLEL13/64X2X4IN.: RNCC: 3 | RNVC: 2

7 Feb 1984

5110-22-609-6849
Hand Wire Stripper

226096849
510BE-28: RNCC: 3 | RNVC: 2

17 Feb 2005

5110-14-287-8390
Hand Metal Stamping Die

142878390
NT92-01JUIN51P0INC0N0-3MM: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-287-8390: RNCC: 3 | RNVC: 2
NT92-01JUIN51P0INC0N0-3MM: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-27-010-6639
Hand File

270106639
99999-NIIN-DA0037216: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-98-104-8487
Scraper Blade

981048487
2 1/2IN BLADE,SKARSTEN 62: RNCC: 3 | RNVC: 2
5110-99-120-0944: RNCC: 6 | RNVC: 9

28 Mar 1974

5110-98-105-0476
Hand Reamer Set

981050476
NO PRIMARY REF 98-105-0476: RNCC: 3 | RNVC: 2
1/57: RNCC: 5 | RNVC: 2

1 Jun 1990

5110-15-208-8237
Alesatore

152088237
3AANPERMD21: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-219-3173
Serie Punzoni 9 Num

152193173
3033G4: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-639-3158
Hand Metal Cutting Shears

216393158
39GP33: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-12-347-6312
Hand Reamer

123476312
DIN206-B2,2-HSS: RNCC: 2 | RNVC: 2

18 Jan 1999

5110-15-143-3990
Utensile Da Tornio

151433990
777/22-12: RNCC: 3 | RNVC: 2
777-22-12: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-25-103-8620
Double Bow Cutting Punch

251038620
2SBF5110HVK1: RNCC: 2 | RNVC: 1
221 4360: RNCC: 5 | RNVC: 2
221-4360: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-25-100-4140
Tube Cutter

251004140
FS 5110-0400: RNCC: 2 | RNVC: 2
41-2528-800-080: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-99-224-5682

5110-12-137-3275
Ventilsitz- Fraeser

121373275
2805 9292: RNCC: 3 | RNVC: 2
W38464/17: RNCC: 5 | RNVC: 2
0994 8415: RNCC: 5 | RNVC: 9
09948415: RNCC: 5 | RNVC: 9
W38464-17: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-520-0834
Diagonal Cutting Pliers

145200834
405.10RC: RNCC: 3 | RNVC: 2
0175153: RNCC: 5 | RNVC: 2
405-10RC: RNCC: 5 | RNVC: 2

10 May 2000

5110-12-131-4838
Reamer Blade Set

121314838
141.05.400: RNCC: 3 | RNVC: 2
141-05-400: RNCC: 5 | RNVC: 2
200-56HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-150-2183
Hand Cold Chisel

661502183
NO PRIMARY REF 66-150-2183: RNCC: 3 | RNVC: 2
07137604: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-27-010-6552
Hand File

270106552
99999-NIIN-DA0014173: RNCC: 2 | RNVC: 1

21 Jun 2002

5110-12-176-8730
Hand Reamer

121768730
45B1: RNCC: 3 | RNVC: 9
11610040: RNCC: 3 | RNVC: 9
7590B1: RNCC: 3 | RNVC: 9
539A1: RNCC: 3 | RNVC: 9

20 Dec 1978

5110-12-353-8547
Hand- Entgrater

123538547
107060: RNCC: 3 | RNVC: 2

15 May 2001

5110-15-165-3659
Foretto In Acciaio

151653659
5491300: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-25-100-4969
Compass Saw Blade

5110-15-193-3367
Electronic Torque W

151933367
599DGT/20: RNCC: 3 | RNVC: 2

6 May 2010

5110-99-865-4241
Hand Axe

998654241
1-59-001: RNCC: 3 | RNVC: 2

27 Nov 1992

5110-12-196-8032
Hand Reamer

121968032
4900059-721330.000.0: RNCC: 2 | RNVC: 2
4900059-721330.000.0: RNCC: 3 | RNVC: 2
4900059-721330.000.0: RNCC: 5 | RNVC: 2
4900059-721330-000-0: RNCC: 5 | RNVC: 2
721330-000-0: RNCC: 5 | RNVC: 9

18 Aug 1983

5110-98-107-7165
Hand Reamer

981077165
PARALLEL31/32X5X10IN.: RNCC: 3 | RNVC: 2

10 Feb 1984

5110-14-541-0958
Craftsman's Knife

145410958
RENHAL: RNCC: 3 | RNVC: 2

14 May 2004

5110-99-075-8202
Craftsman's Knife

990758202
6-98-089: RNCC: 3 | RNVC: 2
10-089: RNCC: 5 | RNVC: 2

6 Dec 1996

5110-15-216-1712
75 5X0 Filiera 4

152161712
SKF4-5X0-75: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-212-7258
Sega A Tazza Con De

152127258
HM7508-75: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-25-135-8534

5110-12-131-4715
Hand Reamer

121314715
131.34.000: RNCC: 3 | RNVC: 2
131-34-000: RNCC: 5 | RNVC: 2
700-8HC: RNCC: 5 | RNVC: 2

30 May 1969

5110-66-150-3072
Single Bit Ax Handle

661503072
NO PRIMARY REF 66-150-3072: RNCC: 3 | RNVC: 2
07186406: RNCC: 5 | RNVC: 2
07186406: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-12-153-2075
Freisenker Fraeser

121532075
CH278-15FE: RNCC: 3 | RNVC: 2
1201 9478: RNCC: 5 | RNVC: 2
CH278-15FE: RNCC: 5 | RNVC: 9
A26-50-130: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-175-6059
Confezione Lame Ric

151756059
USAG220BR: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-12-385-2474
Oval Cutting Punch

123852474
50.000.190: RNCC: 3 | RNVC: 2

12 May 2011

5110-21-637-5482
Hand Reamer

216375482
B94-2: RNCC: 3 | RNVC: 1
149: RNCC: 3 | RNVC: 1
B174-2: RNCC: 3 | RNVC: 1
GGGR180: RNCC: 4 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1
149 7-16: RNCC: 5 | RNVC: 2
415 7-16: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-12-319-3605
Hand File

123193605
2123162: RNCC: 3 | RNVC: 2
2123-160-2: RNCC: 5 | RNVC: 2

26 Sep 1989

5110-17-026-8981
Hand File

170268981
TVA5110-2-263-007.1.1.8: RNCC: 3 | RNVC: 2
TVA5110-2-263-007: RNCC: 5 | RNVC: 1

17 Jun 1972

5110-21-637-5305
Hand Reamer

216375305
B94-2: RNCC: 3 | RNVC: 1
B174-2: RNCC: 3 | RNVC: 1
50-10948: RNCC: 3 | RNVC: 2
GGGR180: RNCC: 4 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1
4500-3-4: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-13-107-7614
Pocket Scissors

131077614
733-5500: RNCC: 3 | RNVC: 2
B-302: RNCC: 3 | RNVC: 2

31 Mar 1977

5110-25-132-8790

5110-12-126-1832
Rabbet Plane

121261832
NO PRIMARY REF 12-126-1832: RNCC: 3 | RNVC: 2
1069-27: RNCC: 5 | RNVC: 9
HW7-27: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-609-9342
Dimpling Punch

226099342
VBW-240-4: RNCC: 3 | RNVC: 2

15 Mar 2005

5110-15-123-4297
Scalpello Piatto Dr

151234297
3602-3-250: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-434-7217
Hand File

994347217
BS498 PART 1: RNCC: 4 | RNVC: 1
FA13228: RNCC: 6 | RNVC: 9
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-17-707-5240
Hand File

177075240
TVA5110-2-263-003-1.1.4: RNCC: 3 | RNVC: 2
TVA5110-2-263-003: RNCC: 5 | RNVC: 1
F1FA13458: RNCC: 6 | RNVC: 9

17 Jun 1972

5110-98-104-4929
Crosscut Hand Saw

981044929
P200-22IN: RNCC: 3 | RNVC: 2
1CNZ221: RNCC: 6 | RNVC: 9
1CNZ221: RNCC: 6 | RNVC: 9

31 May 1973

5110-14-574-3896
Hand File

145743896
DRD-B200+MP1: RNCC: 3 | RNVC: 2

15 Jan 2013

5110-22-610-3386
Pliers

226103386
2628S-200: RNCC: 3 | RNVC: 2

12 May 2005

5110-22-607-3343
Hand File

226073343
8019204: RNCC: 3 | RNVC: 2
1-102-06-3-0: RNCC: 3 | RNVC: 2

8 Jun 2004

5110-21-807-1204
Buttonhole Scissors

218071204
402: RNCC: 3 | RNVC: 2
404: RNCC: 3 | RNVC: 2

16 Aug 1967

5110-15-187-1192
Pinza

151871192
1473: RNCC: 3 | RNVC: 2

19 Feb 2009

5110-21-899-4793
Dimpling Punch

218994793
ZT2065-5/16-24: RNCC: 3 | RNVC: 2
ZT2065-5-16-24: RNCC: 5 | RNVC: 2

12 Aug 1985

5110-98-205-5235
Hand File

982055235
DFAMPD00248: RNCC: 3 | RNVC: 2

30 Jan 2001

5110-12-127-8135
Edge Cutting Trimming Tool

121278135
JD5110-12-127-8135: RNCC: 3 | RNVC: 2
750-2AND3: RNCC: 5 | RNVC: 9

30 May 1969

5110-25-147-5865
Belt Cutter Stowage

251475865
1W-417-A0-27: RNCC: 3 | RNVC: 2

7 Apr 1998

5110-34-037-8494
Ellipse Axes

340378494
TP-1381: RNCC: 5 | RNVC: 2

30 Jun 2008

5110-25-111-5295

5110-99-136-5138

5110-22-617-5183
Hand File Set

226175183
DA8402-126: RNCC: 3 | RNVC: 2

1 Jul 2008

5110-21-890-3408
Hand Cable Stripper

218903408
45-165: RNCC: 3 | RNVC: 2

9 Oct 1982

5110-12-121-4322
File Handle

121214322
51582-60: RNCC: 3 | RNVC: 2
HH-60: RNCC: 3 | RNVC: 2
DIN395-60: RNCC: 4 | RNVC: 1
0362150: RNCC: 5 | RNVC: 2
51582-100: RNCC: 5 | RNVC: 9
60DIN395: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-014-5892
Hand Hacksaw Blade

660145892
15-828: RNCC: 3 | RNVC: 2
06900900: RNCC: 5 | RNVC: 2
STAN-15837: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-98-200-6322
Hand File

982006322
NO PRIMARY REF 98-200-6322: RNCC: 3 | RNVC: 2
3714008: RNCC: 5 | RNVC: 2

6 Oct 1986

5110-99-316-3995
Shave Hook Scraper

993163995
CV195346: RNCC: 3 | RNVC: 2
TMVM-0006-011: RNCC: 5 | RNVC: 2

5 Jul 2012

5110-66-010-8580
Cutting Punch

660108580
151: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-15-213-3277
Lima Diagonale Mm.2

152133277
1-320-08-2-0: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-267-4796
Double Bow Cutting Punch

142674796
214-18: RNCC: 3 | RNVC: 2
8018180001: RNCC: 3 | RNVC: 2
4638-18: RNCC: 3 | RNVC: 9
SYQ0831: RNCC: 5 | RNVC: 2
345-11-18: RNCC: 5 | RNVC: 9
376-18: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-21-886-7134
Dimpling Die

218867134
ZT1863-#1/4-28: RNCC: 3 | RNVC: 2
ZT1863-1-4-28: RNCC: 5 | RNVC: 2

9 Nov 1981

5110-14-306-2020
Combination Plane

143062020
NO PRIMARY REF14-306-2020: RNCC: 3 | RNVC: 2
1644-15: RNCC: 5 | RNVC: 9

1 Jan 1974

5110-15-189-9095
Bisturi Manico

151899095
850-085: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-99-923-9867
Surform File

999239867
21-101: RNCC: 3 | RNVC: 2
101A: RNCC: 5 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H6825: RNCC: 6 | RNVC: 9
H6825: RNCC: 6 | RNVC: 9
0274-274037: RNCC: 6 | RNVC: 9
0274-923-9867: RNCC: 6 | RNVC: 9
101: RNCC: 6 | RNVC: 9
2-21-295: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-22-221-3875
Hand File

222213875
OEBERG 2-305-16-1: RNCC: 5 | RNVC: 2
NAALEFIL: RNCC: 5 | RNVC: 9
KAP.01: RNCC: 5 | RNVC: 9

12 Dec 1972

5110-25-101-4636
Revolving Head Cutting Punch

251014636
FS 5110-0327: RNCC: 2 | RNVC: 2
3145-375-6: RNCC: 3 | RNVC: 2
1535: RNCC: 3 | RNVC: 2
318 3910: RNCC: 5 | RNVC: 2
318-3910: RNCC: 5 | RNVC: 2
2557-0102: RNCC: 5 | RNVC: 2
201820-9: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-98-104-7458
Firmer Chisel

981047458
NO PRIMARY REF 98-104-7458: RNCC: 3 | RNVC: 2
5003-1/8IN: RNCC: 5 | RNVC: 2
1A910-4218: RNCC: 5 | RNVC: 2
5110-99-910-4218: RNCC: 6 | RNVC: 9

10 Dec 1973

5110-66-149-8115
Bolt Cutter

661498115
NO PRIMARY REF 66-149-8115: RNCC: 3 | RNVC: 2
07496701: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-14-572-4696
Pocket Knife

145724696
0-10-825: RNCC: 3 | RNVC: 2
3253560108250: RNCC: 5 | RNVC: 2

5 Jul 2012

5110-66-149-7466
Hand File

661497466
NO PRIMARY REF 66-149-7466: RNCC: 3 | RNVC: 2
00809608: RNCC: 5 | RNVC: 2

8 Apr 2003

5110-15-052-4839
Rectangular Cutting Punch

150524839
A10UNI4134AQ60-3985: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-66-149-8962
Pocket Knife

661498962
NO PRIMARY REF 66-149-8962: RNCC: 3 | RNVC: 2
07657508: RNCC: 5 | RNVC: 2

11 Apr 2003

5110-15-105-8064
Sci Raschietto

151058064
SC/155-US: RNCC: 3 | RNVC: 2

30 May 1989

5110-15-221-9284
Cesoia Pastorino

152219284
561-10: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-126-1371
Double Bow Cutting Punch

121261371
DIN7200-A30: RNCC: 2 | RNVC: 2
0100300: RNCC: 3 | RNVC: 2
240-30: RNCC: 3 | RNVC: 2
TS5110-0821: RNCC: 5 | RNVC: 1
00.09.15.42: RNCC: 5 | RNVC: 2
240145: RNCC: 5 | RNVC: 2
A30DIN7200: RNCC: 5 | RNVC: 2
TS5110-0821-30MM: RNCC: 5 | RNVC: 2
DIN7200A30: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-169-4116
Tronchese

151694116
F72011693: RNCC: 3 | RNVC: 2

5 Nov 2002

5110-66-016-5098
Recess Cutter

660165098
124001: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-14-218-7416

5110-12-120-7577
Adz

121207577
NO PRIMARY REF 12-120-7577: RNCC: 3 | RNVC: 2
ADIN7227: RNCC: 5 | RNVC: 9
ADIN7227STIELDIN7228: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-122-2483
Hand Reamer

121222483
105-17-000: RNCC: 3 | RNVC: 2
LHSS: RNCC: 5 | RNVC: 2

30 May 1969

5110-99-400-2243
Saw Handle

994002243
TL-502-246: RNCC: 3 | RNVC: 2

28 Nov 2007

5110-14-256-8839
Single Bow Cutting Punch

142568839
4637-7: RNCC: 3 | RNVC: 9

1 Jan 1969

5110-66-158-2993
Driver Adaptor

661582993
502AMR288-1: RNCC: 3 | RNVC: 2
502AMR288-1: RNCC: 5 | RNVC: 2

29 Oct 2009

5110-21-798-4560

5110-66-150-3382
Hand Operated Cable Cutter

661503382
NO PRIMARY REF 66-150-3382: RNCC: 3 | RNVC: 2
07674206: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-99-915-4963
Insu Stripping Tool

999154963
DD557117: RNCC: 3 | RNVC: 2
070P4-003: RNCC: 6 | RNVC: 9

27 Oct 2006

5110-66-117-4729
Scraper Blade

661174729
620-2525 H10: RNCC: 3 | RNVC: 2

6 Oct 1983

5110-66-093-9299
Deburring Cutter

660939299
MAM7-501L: RNCC: 3 | RNVC: 2

30 Jan 1977

5110-12-179-2499
Hand Cold Chisel

121792499
DIN6453-B150: RNCC: 2 | RNVC: 2
3594-150: RNCC: 5 | RNVC: 9
574B006-150: RNCC: 5 | RNVC: 9
B150DIN6453: RNCC: 5 | RNVC: 9
DIN6453B150: RNCC: 5 | RNVC: 9

18 Jun 1979

5110-21-893-1048
Hand Reamer

218931048
18-10008: RNCC: 3 | RNVC: 2
4600: RNCC: 5 | RNVC: 1

14 May 1983

5110-15-138-1347
Pinza Spelafili

151381347
746001: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-21-863-0483
Tube Cutter Cutting Wheel

218630483
75046: RNCC: 3 | RNVC: 2

18 Nov 1971

5110-15-232-0838
Spatola Acciaio 40M

152320838
009: RNCC: 3 | RNVC: 2
511015E121808: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-230-5971
Scalpello Edilizia

152305971
1701N/PM-250: RNCC: 3 | RNVC: 2
511015E155243: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-216-0648
Scalpello Beta Da M

152160648
35-100: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-27-010-6578
Hand File

270106578
99999-NIIN-DA0037252: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-12-137-3758
Firmer Chisel

121373758
DIN5139-B35GA: RNCC: 2 | RNVC: 2
B35GADIN5139: RNCC: 5 | RNVC: 2
DIN5139B35GA: RNCC: 5 | RNVC: 9
5110-0024-16: RNCC: 5 | RNVC: 9
5110-024-16: RNCC: 5 | RNVC: 9
TL5110-0024-16: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-617-0983
Pocket Scissors

226170983
HWKARSUN06: RNCC: 3 | RNVC: 2

8 May 2008

5110-15-182-8059
Scalpello

151828059
34BA200: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-66-146-7936
Hand Round Nose Chisel

661467936
809: RNCC: 3 | RNVC: 2
07134500: RNCC: 5 | RNVC: 2

9 Aug 2000

5110-99-523-4575
Knife Blade

995234575
G24E: RNCC: 3 | RNVC: 2
56-1260: RNCC: 3 | RNVC: 2
UKSC3782: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-422-4759
Turning Chisel

994224759
NO PRIMARY REF 99-422-4759: RNCC: 3 | RNVC: 2
N36382-11: RNCC: 5 | RNVC: 9
88604-606-189: RNCC: 6 | RNVC: 9

7 Jun 1980

5110-12-126-1520
Hand Reamer

121261520
NO PRIMARY REF 12-126-1520: RNCC: 3 | RNVC: 2
55-5DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-906-7342
Centre Punch

999067342
FV2071362: RNCC: 3 | RNVC: 2
FV2071362: RNCC: 5 | RNVC: 2
CES P/45109/2: RNCC: 6 | RNVC: 9

30 Jun 1989

5110-99-910-6470
Hand Metal Stamping Die Set

999106470
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL-9-A-H2605: RNCC: 6 | RNVC: 9
H2605: RNCC: 6 | RNVC: 9
1C5022: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H2605: RNCC: 6 | RNVC: 9
FA17772: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-123-2771
Cacciavite Cercafas

151232771
ART2442-100: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-137-7362
Gimlet

121377362
DIN6464-16X190: RNCC: 2 | RNVC: 2
603-16: RNCC: 3 | RNVC: 2
M603-16: RNCC: 3 | RNVC: 2
16X190DIN6464: RNCC: 5 | RNVC: 2

30 May 1969

5110-21-878-2535

5110-17-111-6576
Chain Drill Attachment

171116576
PM4110-1523-00: RNCC: 3 | RNVC: 2

10 Mar 1998

5110-27-011-3974
Hand File

270113974
99999-NIIN-DA0014353: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-12-141-1421
Hand Masonry Drill

121411421
NO PRIMARY REF 12-141-1421: RNCC: 3 | RNVC: 2
600004: RNCC: 5 | RNVC: 9
98-1-2-4-6: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-191-6781
Utensile X Sbavare

151916781
770/52-20: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-98-107-6986
Hand Reamer

981076986
TAPER SPIRAL 3/8IN: RNCC: 3 | RNVC: 2

2 Feb 1984

5110-25-103-3319
Ship Scraper

251033319
541: RNCC: 3 | RNVC: 2
223 9130: RNCC: 5 | RNVC: 2
223-9130: RNCC: 5 | RNVC: 2
204700-4: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-21-851-3644
Hand File

218513644
5110-0462: RNCC: 3 | RNVC: 2

6 Oct 1968

5110-15-123-2768
Pinza Spelafili Iso

151232768
ART0300-160: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-13-121-4045
Scraper Blade

131214045
67.B.50: RNCC: 3 | RNVC: 2
B50: RNCC: 3 | RNVC: 2
02.20.20.01: RNCC: 5 | RNVC: 2

6 Jul 2012

5110-15-230-4132
Lima Piatta

152304132
2560/2/4: RNCC: 3 | RNVC: 2
511015E078590: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-17-701-4869
Bearing Scraper

177014869
660-3-8: RNCC: 3 | RNVC: 2

27 Apr 1970

5110-15-062-5540
Tinner's Hollow Cutting Punch

150625540
3702-3: RNCC: 3 | RNVC: 2

31 May 1981

5110-12-132-2353
Reamer Blade Set

121322353
101.31.400: RNCC: 3 | RNVC: 2
101-31-400: RNCC: 5 | RNVC: 2
800-26HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-25-120-4663
Hand Metal Stamping Die Set

251204663
FS 5110-0788 POS 4: RNCC: 2 | RNVC: 2
221-2430: RNCC: 5 | RNVC: 2
221 2430: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-12-126-1464
Hand Reamer

121261464
NO PRIMARY REF 12-126-1464: RNCC: 3 | RNVC: 2
27DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-309-3538
Hand Reamer

123093538
DIN206-B3,92H8-HSS: RNCC: 2 | RNVC: 2

19 Jan 1987

5110-27-017-8931
Hand File

270178931
60259002: RNCC: 2 | RNVC: 1
60259002: RNCC: 2 | RNVC: 1

3 Oct 2003

5110-99-910-4132
Ratchet Bit Brace

999104132
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
73: RNCC: 5 | RNVC: 2
347MS: RNCC: 6 | RNVC: 9
347MS/3: RNCC: 6 | RNVC: 9
347MSNUMBER3: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
F1/FA 10491: RNCC: 6 | RNVC: 9
H251: RNCC: 6 | RNVC: 9
DEFSTAN51-11: RNCC: 6 | RNVC: 9
H251: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-153-4533
Hand Metal Cutting Shears

991534533
10504310N: RNCC: 3 | RNVC: 2
METS/7/7/020: RNCC: 5 | RNVC: 1

7 Jan 2013

5110-98-205-6471
Hand File

982056471
DFAMPD00100 E: RNCC: 2 | RNVC: 2

27 Jun 2001

5110-12-122-2558
Hand Reamer

121222558
5-0SPIRALGENUTET: RNCC: 3 | RNVC: 2

30 May 1969

5110-21-866-8560

5110-98-104-7456
Hand Cold Chisel

981047456
NO PRIMARY REF 98-104-7456: RNCC: 3 | RNVC: 2
234A: RNCC: 5 | RNVC: 2
1A910-4198: RNCC: 5 | RNVC: 2
5110-99-910-4206: RNCC: 6 | RNVC: 9

10 Dec 1973

5110-66-018-2173
Hand File

660182173
ROUNDFILE/100MMX3.5MM: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-32-079-8577
Pliers

320798577
NO PRIMARY REF 32-079-8577: RNCC: 3 | RNVC: 2
1PK-709DS: RNCC: 5 | RNVC: 2

1 Sep 2005

5110-12-330-8104
Gimlet

123308104
DIN7481-32: RNCC: 2 | RNVC: 2
32DIN7481: RNCC: 5 | RNVC: 2

11 Feb 1993

5110-15-216-1710
5 Filiera Skf 17X1

152161710
SKF17X1-5: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-25-100-6604
Knockout Punch And Die Set

251006604
1-3-8IN: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-15-208-3777
Alesatore

152083777
3AAXFCFRDP5-7: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-102-8019
Knockout Punch And Die

211028019
MS16322-1: RNCC: 2 | RNVC: 2
735: RNCC: 3 | RNVC: 1
GGGP836: RNCC: 4 | RNVC: 1
71BB: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-15-208-3158
Alesatore

152083158
3AAXFCFRDP14-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-368-7144
Hand Metal Cutting Shears

123687144
481-1: RNCC: 3 | RNVC: 2
00.19.94.54: RNCC: 5 | RNVC: 2

10 Apr 2006

5110-14-232-2502
Hand Metal Stamping Die Set

142322502
DELA.3231.05: RNCC: 3 | RNVC: 2
293-5: RNCC: 5 | RNVC: 2
293.5: RNCC: 5 | RNVC: 2
0166340: RNCC: 5 | RNVC: 9
3231-5: RNCC: 5 | RNVC: 9
4651-5: RNCC: 5 | RNVC: 9
342-02-5: RNCC: 5 | RNVC: 9

1 Jan 1967

5110-17-017-6894
Hand File

170176894
TVA5110-2-263-005-1.1.17: RNCC: 3 | RNVC: 2
472W1433: RNCC: 3 | RNVC: 2
TVA5110-2-263-005: RNCC: 5 | RNVC: 1
12400603: RNCC: 5 | RNVC: 2

17 Jun 1972

5110-21-105-1681
Craftsman's Knife

211051681
55170: RNCC: 3 | RNVC: 2
F252-2: RNCC: 5 | RNVC: 9
312036: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-21-639-5214
Hand Cape Chisel

216395214
760C: RNCC: 3 | RNVC: 2
C12: RNCC: 3 | RNVC: 2
39GP43: RNCC: 4 | RNVC: 1
C12: RNCC: 5 | RNVC: 2
150-1/4: RNCC: 5 | RNVC: 2

5 Feb 1964

5110-15-230-5439
Hand Operated Cable Cutter

152305439
1132023: RNCC: 3 | RNVC: 2

19 Jul 2007

5110-15-230-5970
Scalpello A Taglien

152305970
1702N/PM-50: RNCC: 3 | RNVC: 2
511015E155242: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-21-863-0276
Ship Scraper

218630276
5110-1218: RNCC: 3 | RNVC: 2

14 Oct 1971

5110-15-192-8806
Spatola Dentata Per

151928806
0695-929-080: RNCC: 3 | RNVC: 2

26 Mar 2010

5110-12-137-9211
Double Bow Cutting Punch

121379211
DIN7200-A2: RNCC: 2 | RNVC: 2
0100020: RNCC: 3 | RNVC: 2
606200: RNCC: 3 | RNVC: 2
00.08.87.14: RNCC: 5 | RNVC: 2
240-2: RNCC: 5 | RNVC: 2
A2DIN7200: RNCC: 5 | RNVC: 2
3460-2: RNCC: 5 | RNVC: 9
DIN7200A2: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-123-9905
Lama Sega A Nastro

151239905
2818-18-25: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-21-851-3712
Hand Rasp

218513712
39GP30: RNCC: 4 | RNVC: 1
5110-1006: RNCC: 5 | RNVC: 9

6 Oct 1968

5110-15-148-9868
Lever

151489868
LG: RNCC: 3 | RNVC: 2

9 Nov 1998

5110-22-619-7744
Diagonal Cutting Pliers

226197744
2422E: RNCC: 3 | RNVC: 2

30 Sep 2009

5110-21-885-2683
Scraping Knife

218852683
S-3 1/2S: RNCC: 3 | RNVC: 2

11 Aug 1981

5110-13-119-5622
Firmer Chisel

131195622
424P-22: RNCC: 3 | RNVC: 2
00.07.13.34: RNCC: 5 | RNVC: 2
7311518238384: RNCC: 5 | RNVC: 2

8 Nov 2006

5110-12-121-4350
Firmer Chisel

121214350
DIN5139-B22GA: RNCC: 2 | RNVC: 2
B22GADIN5139: RNCC: 5 | RNVC: 2
164-22: RNCC: 5 | RNVC: 9
B22DIN5139: RNCC: 5 | RNVC: 9
DIN5139B22GA: RNCC: 5 | RNVC: 9
5110-0024-10: RNCC: 5 | RNVC: 9
5110-024-10: RNCC: 5 | RNVC: 9
TL5110-0024-10: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-123-2754
Punta Riaffilabile

151232754
ART20280: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-552-6833
Hand Operated Cable Cutter

995526833
3780: RNCC: 3 | RNVC: 1
5013969687309: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-99-603-1737
Hand Reamer

996031737
BS328 PART 4: RNCC: 4 | RNVC: 1
B100: RNCC: 5 | RNVC: 1
B100 1/4IN.: RNCC: 5 | RNVC: 2

17 Mar 1999

5110-15-143-3959
Barretta Per Inciso

151433959
9504/2-2,5: RNCC: 3 | RNVC: 2
9504/2-40: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-98-205-5157
Crosscut Hand Saw

982055157
DFAMPD00191/8: RNCC: 2 | RNVC: 2

23 Jan 2001

5110-21-885-2571
Pipe Cutter Cutting Wheel

218852571
F-515: RNCC: 3 | RNVC: 2

21 Jul 1981

5110-12-126-1656
Double Bow Cutting Punch

121261656
DIN7200-A25: RNCC: 2 | RNVC: 2
0100250: RNCC: 3 | RNVC: 2
240-25: RNCC: 3 | RNVC: 2
TS5110-0821: RNCC: 5 | RNVC: 1
00.09.10.37: RNCC: 5 | RNVC: 2
240120: RNCC: 5 | RNVC: 2
A25DIN7200: RNCC: 5 | RNVC: 2
TS5110-0821-25MM: RNCC: 5 | RNVC: 2
DIN7200A25: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-880-8932
Craftsman's Knife

218808932
180: RNCC: 3 | RNVC: 2
275-0420: RNCC: 5 | RNVC: 2

3 Jul 1980

5110-27-010-6690
Hand File

270106690
99999-NIIN-DA0037225: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-98-106-3058
Mini-Seal Kit

981063058
NO PRIMARY REF 98-106-3058: RNCC: 3 | RNVC: 2
MINI-SEAL-KIT: RNCC: 5 | RNVC: 2

24 Sep 1979

5110-15-171-9767
Kit Punteruoli Beta

151719767
KIT PUNTERUOLI BETA MOD.31/B6: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-14-324-7004
Double Bow Cutting Punch

143247004
214-37: RNCC: 3 | RNVC: 2
376-37: RNCC: 3 | RNVC: 2
4638-37: RNCC: 5 | RNVC: 9
345-11-37: RNCC: 5 | RNVC: 9
214-37: RNCC: 5 | RNVC: 9

1 Jan 1975

5110-99-209-5536
Cutter Assembly

992095536
ST163: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-15-192-4951
Saldatore Polifusor

151924951
055531B: RNCC: 3 | RNVC: 2
(241)AJ236055531B: RNCC: 5 | RNVC: 2

22 Mar 2010

5110-25-100-5439
Haand Is Bor

251005439
417: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-15-232-1426
Tronchesino

152321426
44400305: RNCC: 3 | RNVC: 2

19 Jul 2007

5110-99-252-8398
Deburring Too Blade

992528398
B10: RNCC: 3 | RNVC: 2
1C/8692: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-22-252-3724
Reamer

222523724
J-1243: RNCC: 3 | RNVC: 2

15 Nov 1966

5110-14-270-3941
A Main Alesoir

5110-15-143-4826
Ugnetti Nervati

151434826
352-200: RNCC: 3 | RNVC: 2
352004: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-15-186-0904
Stelo Diritto Sicut

151860904
9729G-12: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-33-210-3655
Hand File

332103655
4081-8: RNCC: 3 | RNVC: 2
ISO 234-1: RNCC: 4 | RNVC: 1
8414299466904: RNCC: 5 | RNVC: 2
5110-33-P00-3344: RNCC: 6 | RNVC: 9

25 Sep 2012

5110-99-432-8926
Stencil Cutti Stamp

994328926
NO PRIMARY REF 99-432-8926: RNCC: 3 | RNVC: 2
F1FA17765T: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-21-639-6090
Hand Hacksaw Blade

216396090
46GP1: RNCC: 4 | RNVC: 1
5110-0046: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-98-107-4350
Rip Hand Saw

981074350
EIA-BUSHMAN-121: RNCC: 3 | RNVC: 2

5 Aug 1983

5110-99-910-5672
Hollo Cutting Punch

999105672
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 5 | RNVC: 9
DL9A-H2033: RNCC: 5 | RNVC: 9
H2033: RNCC: 6 | RNVC: 9
F1FA16078: RNCC: 6 | RNVC: 9
1B1882: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-148-5982
Hand Reamer

121485982
100.10.000: RNCC: 3 | RNVC: 2
TYPE:D-10-11MM: RNCC: 5 | RNVC: 2
101305: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-553-5589
Hand Optical Fiber Cleaving Tool

145535589
FC-6S-C: RNCC: 3 | RNVC: 2
FC-6S-C: RNCC: 5 | RNVC: 2

17 Apr 2007

5110-17-701-5612
Hand File

177015612
NO PRIMARY REF 17-701-5612: RNCC: 3 | RNVC: 2

15 May 1970

5110-27-011-3984
Hand File

270113984
99999-NIIN-DA0039185: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-99-942-0081
Hand Reamer

999420081
BS122 PART 2: RNCC: 4 | RNVC: 1
6.5MM PARALLEL HAND REAMER: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-176-8361
Hand Reamer

121768361
DIN206-B23-HSS: RNCC: 2 | RNVC: 2
301-FORM B-23: RNCC: 3 | RNVC: 2
F1131-23: RNCC: 3 | RNVC: 2
7586C23: RNCC: 5 | RNVC: 9
536C23: RNCC: 5 | RNVC: 9
B23DIN206HSS: RNCC: 5 | RNVC: 9
13010-23: RNCC: 5 | RNVC: 9

20 Dec 1978

5110-99-910-5669
Tinner's Hollow Cutting Punch

999105669
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
07242201: RNCC: 5 | RNVC: 2
DL9A: RNCC: 6 | RNVC: 9
DL9A-H2030: RNCC: 6 | RNVC: 9
H2030: RNCC: 6 | RNVC: 9
FA16075: RNCC: 6 | RNVC: 9
1B2990: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-128-2128
Alesatore

151282128
4520-24: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-218-6232
Set Caratteri Accia

152186232
VARIEMISURE-ORIZZONTALE: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-27-005-0780
Hand Cold Chisel

270050780
1010000716: RNCC: 3 | RNVC: 2

12 Feb 1997

5110-12-140-1496
Hand Reamer

121401496
101.09.000: RNCC: 3 | RNVC: 2
101-09-000: RNCC: 5 | RNVC: 2
800-2HC: RNCC: 5 | RNVC: 2

30 May 1969

5110-17-111-6581
Chain Drill Attachment

171116581
PM4110-1524: RNCC: 3 | RNVC: 2

10 Mar 1998

5110-66-149-8963
Pocket Knife

661498963
NO PRIMARY REF 66-149-8963: RNCC: 3 | RNVC: 2
03741010: RNCC: 5 | RNVC: 2

11 Apr 2003

5110-66-151-6497
Scraper Blade

661516497
NO PRIMARY REF 66-151-6497: RNCC: 3 | RNVC: 2
EOB12451: RNCC: 5 | RNVC: 2

1 Sep 2003

5110-12-122-2531
Hand Reamer

121222531
513A103SS21-32: RNCC: 3 | RNVC: 2

30 May 1969

5110-22-616-4120
Hand File Set

226164120
2-471-16-1-0: RNCC: 3 | RNVC: 2

10 Jan 2008

5110-99-738-1760
Tube Cutter

997381760
20425U: RNCC: 3 | RNVC: 2
SPSCM/PO/1329: RNCC: 6 | RNVC: 9

29 Apr 2010

5110-21-639-4384
Hand File

216394384
39GP30: RNCC: 4 | RNVC: 1
5110-0497: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-15-218-0826
Scalpello Falegname

152180826
702P-6: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-17-108-1422
Knife Blade

171081422
2-11-908: RNCC: 3 | RNVC: 2

14 Jun 1994

5110-37-520-7316
Hand Cable Stripper

375207316
P-952: RNCC: 3 | RNVC: 2

28 Jan 2011

5110-15-056-3817
Rotella Per Tagliat

150563817
2412-25X14X7-5: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-124-0231
Barretta Per Inciso

151240231
9506/2-4: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-230-4240
Svasatore A Tre Tag

152304240
7794/2-8: RNCC: 3 | RNVC: 2
511015E094225: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-66-098-3076
Hand Cold Chisel

660983076
BS 3066: RNCC: 3 | RNVC: 1
27313: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
3155-2: RNCC: 5 | RNVC: 9

22 Aug 1978

5110-98-205-5368
Hand File

982055368
DFAMPD00100 D: RNCC: 2 | RNVC: 2

5 Mar 2001

5110-27-010-6686
Hand File

270106686
99999-NIIN-DA0014060: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-27-010-7448
Hand Reamer

270107448
99999-NIIN-DA0036177: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-125-6831
Lima Per Meccanica

151256831
2560/1-14: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-21-639-4180
Hand File

216394180
39GP30: RNCC: 4 | RNVC: 1
5110-0623: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-25-160-6228
Single Bit Ax

251606228
NO PRIMARY REF 25-160-6228: RNCC: 3 | RNVC: 2
21154: RNCC: 5 | RNVC: 2

8 Apr 2011

5110-17-701-4873
Hand Reamer

177014873
6-5H7DIN206SS: RNCC: 2 | RNVC: 1
586-6-5: RNCC: 3 | RNVC: 2
DIN206: RNCC: 4 | RNVC: 1

14 May 1970

5110-15-191-6809
Lama In Filo Tondo

151916809
2798/1: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-218-3267
Pinzetta Di Precisi

152183267
7/01505: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-158-8578
File Handle

661588578
510 20 83-01: RNCC: 3 | RNVC: 2
510 20 83-01: RNCC: 5 | RNVC: 2

7 Sep 2010

5110-15-232-3536
Tronchese

152323536
341 MV/160: RNCC: 3 | RNVC: 2
511015E098822: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-12-165-5341
Pipe Cutter

121655341
NO PRIMARY REF 12-165-5341: RNCC: 3 | RNVC: 2
4485KM: RNCC: 5 | RNVC: 9

25 May 1976

5110-99-425-2954
Warheads Scraper

994252954
NO PRIMARY REF 99-425-2954: RNCC: 3 | RNVC: 2
CSAS440SH2-7: RNCC: 5 | RNVC: 2
633517: RNCC: 6 | RNVC: 9

19 Mar 1990

5110-16-005-6921
Hand Hacksaw Blade

160056921
CSN222950-300X13/18Z-BI: RNCC: 2 | RNVC: 2
CSN222950-300X13/18Z-BI: RNCC: 3 | RNVC: 2
M9121100: RNCC: 5 | RNVC: 2

13 Mar 2007

5110-12-384-8157
Hand Cold Chisel

123848157
53.000.036: RNCC: 3 | RNVC: 2
51.000.041: RNCC: 3 | RNVC: 2
51.000.041: RNCC: 5 | RNVC: 2
53.000.036: RNCC: 5 | RNVC: 2

31 Mar 2011

5110-21-870-0787
Dielectric Trim Jig

218700787
KTD77: RNCC: 3 | RNVC: 2

16 Aug 1973

5110-15-199-0865
Scalpello Di Rame

151990865
7250-300: RNCC: 3 | RNVC: 2
M7250-300: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-138-1294
Spaccadadi

151381294
490/4: RNCC: 3 | RNVC: 2
490004: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-136-1981
Pinza Spellafili Da

151361981
146-6: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-21-880-8706
Keyhole Saw Blade

218808706
41-2: RNCC: 3 | RNVC: 2

16 Apr 1980

5110-15-183-3002
Fustella

151833002
160106: RNCC: 3 | RNVC: 2
160A-4,5MM.: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-66-150-3046
Hand Metal Cutting Punch And Die Set

661503046
NO PRIMARY REF 66-150-3046: RNCC: 3 | RNVC: 2
07660304: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-99-923-9866
Metal Saw Handle

999239866
NO PRIMARY REF 99-923-9866: RNCC: 3 | RNVC: 2
12: RNCC: 5 | RNVC: 2
0274-274034: RNCC: 6 | RNVC: 9
0274-923-9866: RNCC: 6 | RNVC: 9
1C6181: RNCC: 6 | RNVC: 9

27 Nov 1980

5110-34-041-8513
Metal Cutting Hand Saw

340418513
0000000201294: RNCC: 3 | RNVC: 2
MF1 20129-4: RNCC: 6 | RNVC: 9

4 Apr 2012

5110-99-942-0020
Hand Reamer

999420020
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-744-5723
Gripper Set

997445723
LB-0197 (MOD): RNCC: 3 | RNVC: 2
LB197(MOD): RNCC: 5 | RNVC: 2
LB197 (MOD): RNCC: 6 | RNVC: 9
1H1140: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-101-1287
Wood Scraper

121011287
NO PRIMARY REF 12-101-1287: RNCC: 3 | RNVC: 2
27: RNCC: 5 | RNVC: 9
3575-00: RNCC: 6 | RNVC: 9

30 May 1969

5110-22-607-3276
Hand File

226073276
1-170-08-1-0: RNCC: 3 | RNVC: 2
8019990: RNCC: 3 | RNVC: 2

8 Jun 2004

5110-99-910-5571
Tinner's Hollow Cutting Punch

999105571
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 6 | RNVC: 9
DL9A-H1900: RNCC: 6 | RNVC: 9
H1900: RNCC: 6 | RNVC: 9
F1FA15984: RNCC: 6 | RNVC: 9
1K167: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-27-010-6672
Hand File

270106672
99999-NIIN-DA0037188: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-12-156-1519
Bearing Scraper

121561519
NM262-01: RNCC: 3 | RNVC: 2
NM262-01: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-189-8940
Lama Bisturi Acciai

151898940
850-120: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-21-849-8071
Hand File

218498071
5110-0597: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-21-105-2355
Back Saw

211052355
5029: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-13-117-1324
Scraper

131171324
3059001530: RNCC: 3 | RNVC: 2

2 Feb 1999

5110-15-165-4298
Forbice Per Elettri

151654298
1128C: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-22-613-2280
Hand Wire Stripper

226132280
145-9728: RNCC: 3 | RNVC: 2

28 Apr 2006

5110-12-146-5158

5110-99-466-1371
Hand Reamer

994661371
BS122 PART 2: RNCC: 4 | RNVC: 1
1G527: RNCC: 6 | RNVC: 9
9/16: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-22-610-1774
Hand File

226101774
1-230-08-2-2: RNCC: 3 | RNVC: 2

15 Apr 2005

5110-15-125-6835
Lima Per Meccanica

151256835
2564/1-10: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-500-5244
Calibration Bar

995005244
MC1278061: RNCC: 3 | RNVC: 2

17 May 2002

5110-66-150-3387
Hand Operated Cable Cutter

661503387
KCC42: RNCC: 3 | RNVC: 2
00893078: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-12-314-8380
Hand Wire Stripper

123148380
JUG90823516: RNCC: 3 | RNVC: 2
3-805 VDE: RNCC: 3 | RNVC: 2
1861VDE-11: RNCC: 5 | RNVC: 2
5579980002: RNCC: 5 | RNVC: 2

17 Aug 1988

5110-21-868-0545
Scraper

218680545
7044-69E: RNCC: 3 | RNVC: 2

14 Jul 1972

5110-17-701-3834
Craftsman's Knife

177013834
NO PRIMARY REF 17-701-3834: RNCC: 3 | RNVC: 2
GB3134: RNCC: 5 | RNVC: 9

16 May 1970

5110-99-456-2366
Type Precision File

994562366
DEFSTAN51-11PT6: RNCC: 6 | RNVC: 9
F1FA13564: RNCC: 6 | RNVC: 9

3 Apr 1978

5110-15-137-8612
Svasatore Con Testa

151378612
7796-1/5: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-16-006-1648
Hand File

160061648
286211633025: RNCC: 3 | RNVC: 2
8595055900976: RNCC: 5 | RNVC: 2
PZP 300/2: RNCC: 5 | RNVC: 2

9 Dec 2008

5110-15-002-4747
Retention Jaws

150024747
CBC-40-0623F: RNCC: 3 | RNVC: 2

29 Aug 2013

Load More Results