What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 108 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 108of 112

5110-25-143-4800
Hull Sag

5110-15-230-5647
Raschietto A Tre Ta

152305647
1717B-150: RNCC: 3 | RNVC: 2
511015E090018: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-126-1464
Lama Di Ricambio Pe

151261464
3278-4-25: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-458-6083
Diagonal Cutting Pliers

144586083
NO PRIMARY REF14-458-6083: RNCC: 3 | RNVC: 2
0175520: RNCC: 5 | RNVC: 2
416-12: RNCC: 5 | RNVC: 2
416.12: RNCC: 5 | RNVC: 2
91639870: RNCC: 5 | RNVC: 2

29 Oct 1992

5110-99-004-8195

5110-99-841-5556

5110-25-145-5619
Tilvekstbor

5110-15-222-0736
Punte Da Centro N-8

152220736
8600G8: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-317-5209
File Handle

993175209
NO PRIMARY REF 99-317-5209: RNCC: 3 | RNVC: 2
7311518193348: RNCC: 5 | RNVC: 2
9-484-3.2-10: RNCC: 5 | RNVC: 2
9-484-3-2-10: RNCC: 6 | RNVC: 9
NPPO/GAMA4B/181103: RNCC: 6 | RNVC: 9
020AO-003: RNCC: 6 | RNVC: 9
034D00010: RNCC: 6 | RNVC: 9

30 Jan 2002

5110-17-701-5892
Plumber's Hand Saw

177015892
NO PRIMARY REF 17-701-5892: RNCC: 3 | RNVC: 2

14 May 1970

5110-66-149-7542
Hand File

661497542
NO PRIMARY REF 66-149-7542: RNCC: 3 | RNVC: 2
00694212: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-12-357-7253
Hand File

123577253
COR108-180MM-H2: RNCC: 3 | RNVC: 2
108-180-H2-: RNCC: 5 | RNVC: 2

16 Jul 2002

5110-12-370-9490
Hand File Set

123709490
266/14 140MMH1: RNCC: 3 | RNVC: 2
01.78.76.28: RNCC: 5 | RNVC: 2
4007220272794: RNCC: 5 | RNVC: 2

19 Jan 2007

5110-99-754-2954
Hand Hacksaw Blade

997542954
BS1919: RNCC: 4 | RNVC: 1
SF1232: RNCC: 5 | RNVC: 2

24 Feb 1992

5110-14-456-2862
Diagonal Cutting Pliers

144562862
723-E: RNCC: 3 | RNVC: 2
91739201: RNCC: 5 | RNVC: 2

25 Jun 1992

5110-17-115-5928
Hand Reamer

171155928
K7-8: RNCC: 3 | RNVC: 2
K7-8: RNCC: 5 | RNVC: 2

10 Apr 2003

5110-21-842-7372
Cable Strip Bushing

218427372
SHEATHMASTERBUSHING3-12: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-12-323-8697
Hand Oil Groove Chisel

123238697
0003-0215-000: RNCC: 3 | RNVC: 2
0003-0215-000: RNCC: 5 | RNVC: 2
0003-0215-000: RNCC: 5 | RNVC: 2
0003-0215-000: RNCC: 5 | RNVC: 9

2 Jan 1991

5110-22-609-6848
Hand Wire Stripper

226096848
510-BE-26: RNCC: 3 | RNVC: 2

17 Feb 2005

5110-15-117-7930
Reamer

151177930
P-175501-401/402-12C001-1002: RNCC: 3 | RNVC: 2
P175501-401/402-12C001-1002: RNCC: 5 | RNVC: 2

28 Jan 1994

5110-14-232-2503
Hand Metal Stamping Die Set

142322503
4650-2: RNCC: 3 | RNVC: 9
3230-2: RNCC: 5 | RNVC: 9
342-01-2: RNCC: 5 | RNVC: 9
91LETTRES2: RNCC: 5 | RNVC: 9

1 Jan 1967

5110-14-235-3918
Scie A Montur Lame

142353918
E73-028-500X40: RNCC: 2 | RNVC: 2
2031-50: RNCC: 3 | RNVC: 9

1 Jan 1967

5110-21-870-0285
Scraper Blade

218700285
812: RNCC: 3 | RNVC: 2
5110-1233: RNCC: 6 | RNVC: 9

19 Apr 1973

5110-66-138-0242
Thread R Parts Kit

661380242
NESKIT1-55DEG: RNCC: 3 | RNVC: 2

9 Sep 1993

5110-21-801-6314
Diagonal Cutting Pliers

218016314
40-7: RNCC: 3 | RNVC: 2
39GP16: RNCC: 4 | RNVC: 1
GGGP471: RNCC: 4 | RNVC: 1
1T1019: RNCC: 6 | RNVC: 9

4 Jun 1968

5110-15-191-8520
Assortimento 3 Cutt

151918520
ASSORTIMENTO3CUTTER: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-99-942-0013
Hand Reamer

999420013
BS122PT2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
02-5356: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-17-701-5270
File Handle

177015270
171-12: RNCC: 3 | RNVC: 2
171-120: RNCC: 3 | RNVC: 2
41H1116: RNCC: 6 | RNVC: 9

21 Sep 1971

5110-12-121-4346
Firmer Chisel

121214346
DIN5139-B18GA: RNCC: 2 | RNVC: 2
00.07.43.64: RNCC: 5 | RNVC: 2
B18GADIN5139: RNCC: 5 | RNVC: 2
164-18: RNCC: 5 | RNVC: 9
B18DIN5139: RNCC: 5 | RNVC: 9
5110-024-8: RNCC: 5 | RNVC: 9
TL5110-0024-8: RNCC: 5 | RNVC: 9
5110-0024-8: RNCC: 5 | RNVC: 9
DIN5139B18GA: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-161-8190
Korrektions Fraeser

121618190
6-081-598-5015-0: RNCC: 3 | RNVC: 9
5121-50RDX15GRD: RNCC: 5 | RNVC: 2

30 May 1969

5110-25-102-2158
Hand Oil Groove Chisel

251022158
NO PRIMARY REF25-102-2158: RNCC: 3 | RNVC: 2
217232-1: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-15-172-8787
Tenagliola Cosmos

151728787
TENAGLIOLA COSMOS: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-66-013-7578
Hand Reamer

660137578
650 4664: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-14-407-8105

5110-41-002-1981
Bow Saw

410021981
7028-016: RNCC: 3 | RNVC: 2

26 Mar 2013

5110-12-330-2970
Wire Stripper Blade

123302970
734342-1: RNCC: 3 | RNVC: 2

28 Nov 1992

5110-22-212-0259
Straight Trimmers Shears

222120259
440-863: RNCC: 3 | RNVC: 2
440-863: RNCC: 5 | RNVC: 2
OLIEPROEVEKASSE,SAKS: RNCC: 5 | RNVC: 9
SAKS: RNCC: 5 | RNVC: 9

24 May 1991

5110-99-539-3894
Reseating Tool

995393894
823086A: RNCC: 3 | RNVC: 2
823086: RNCC: 5 | RNVC: 1

25 Apr 1991

5110-12-379-1672
Hand Wire Stripper

123791672
12 42 195: RNCC: 3 | RNVC: 2
1242195: RNCC: 5 | RNVC: 2
4003773054580: RNCC: 5 | RNVC: 2

30 Jun 2009

5110-99-628-8109

5110-21-853-7644
Single Bow Cutting Punch

218537644
147: RNCC: 3 | RNVC: 1
M30: RNCC: 3 | RNVC: 2
5110-0962: RNCC: 5 | RNVC: 9

23 May 1969

5110-15-230-4195
Scalpello Per Legno

152304195
6050/2-14: RNCC: 3 | RNVC: 2
511015E090644: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-99-977-4118
Hand Str Base Plate

999774118
1-20720-55: RNCC: 3 | RNVC: 2
15: RNCC: 5 | RNVC: 1

25 Apr 1991

5110-17-004-5788
Hand Reamer

170045788
BS122-2-1952TAB3 11-16IN: RNCC: 2 | RNVC: 1
ISO 236/1: RNCC: 4 | RNVC: 1
BS122: RNCC: 4 | RNVC: 1

17 Jun 1972

5110-25-114-5522
Hand File

251145522
FS 5110-0645 POS 5: RNCC: 2 | RNVC: 2
242: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-12-371-7449
Pocket Folding Multi-Tool

123717449
3.0333.N: RNCC: 3 | RNVC: 2
3.0333.N: RNCC: 5 | RNVC: 2

10 May 2007

5110-15-192-9888
Giravite B-Mat Seri

151929888
12730001: RNCC: 3 | RNVC: 2
(241)AD78212730001: RNCC: 5 | RNVC: 2

31 Mar 2010

5110-98-104-2094
Knife Blade

5110-15-230-5605
Scalpello Con Param

152305605
1342PM/235: RNCC: 3 | RNVC: 2
511015E087192: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-14-256-8866

5110-12-140-1294
Hand Metal Stamping Die Set

121401294
TL5110-0028-090: RNCC: 2 | RNVC: 2
62400060: RNCC: 3 | RNVC: 2
36806: RNCC: 5 | RNVC: 9
330-6: RNCC: 5 | RNVC: 9
330006: RNCC: 5 | RNVC: 9
DIN7353-SATZARAB-6: RNCC: 5 | RNVC: 9
TK-KG55-5110-480-090: RNCC: 5 | RNVC: 9

30 May 1969

5110-17-701-3846
Craftsman's Knife

177013846
NO PRIMARY REF 17-701-3846: RNCC: 3 | RNVC: 2
GB3151: RNCC: 5 | RNVC: 9

16 May 1970

5110-17-701-5310
End Cutting Nippers

177015310
NO PRIMARY REF 17-701-5310: RNCC: 3 | RNVC: 2
316-4 1-2: RNCC: 6 | RNVC: 9
570-4: RNCC: 6 | RNVC: 9

15 May 1970

5110-99-812-3662

5110-99-432-8953

5110-99-428-7612
Chisel And Gouge Handle

994287612
C1S1026-1: RNCC: 2 | RNVC: 2
F1FA14395: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-122-7455
Hand Reamer

991227455
BS122PT2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-132-9485
Assortimento 6 Lame

151329485
2636: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-208-8254
Sega

152088254
CM-5X15: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-131-7011
Reamer Blade Set

121317011
131.18.400: RNCC: 3 | RNVC: 2
131-18-400: RNCC: 5 | RNVC: 2
700-16HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-17-119-0767
Leerploeg

171190767
1320120: RNCC: 3 | RNVC: 2

6 Nov 2006

5110-15-208-4649
Fustelle Per Guarni

152084649
3FANGRF015: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-149-7478
Hand File

661497478
NO PRIMARY REF 66-149-7478: RNCC: 3 | RNVC: 2
07074903: RNCC: 5 | RNVC: 2

10 Apr 2003

5110-17-123-7411
Glamex Montageset

171237411
01-125250NSCMB4379: RNCC: 3 | RNVC: 2
01-125250: RNCC: 5 | RNVC: 2

19 May 2011

5110-15-218-0410
Cesoia Per Lamiera

152180410
ART420/12-300: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-150-0895
Metal Cutting Hand Saw

661500895
NO PRIMARY REF 66-150-0895: RNCC: 3 | RNVC: 2
07251108: RNCC: 5 | RNVC: 2

14 Apr 2003

5110-21-868-0541
Scraper

5110-25-121-5377

5110-66-120-4952
Hand Reamer

661204952
ADJUSTABLE REAMER: RNCC: 3 | RNVC: 1
653 0068: RNCC: 3 | RNVC: 2
MA2: RNCC: 5 | RNVC: 9

14 Jun 1984

5110-14-315-5992
Tube Cutter

143155992
238A.32: RNCC: 3 | RNVC: 2
238A-32: RNCC: 5 | RNVC: 2
238A32: RNCC: 5 | RNVC: 2
3148511552308: RNCC: 5 | RNVC: 2
300-6354: RNCC: 5 | RNVC: 2
101564: RNCC: 5 | RNVC: 2
0155230: RNCC: 5 | RNVC: 9
238-32: RNCC: 5 | RNVC: 9

1 Jan 1975

5110-15-172-6034
Seghetto Puk In All

151726034
SEGHETTO PUK IN ALLUMINIO CON LA: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-208-5305
Lima

152085305
3LCNPQCND0N350: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-433-4718

5110-21-865-8108

5110-99-451-2117

5110-25-103-9176
Hand Reamer

251039176
13-75T015-25MM: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-12-189-8720
Reamer Blade Set

121898720
NO PRIMARY REF 12-189-8720: RNCC: 3 | RNVC: 2
2370/02: RNCC: 5 | RNVC: 9

22 Oct 1981

5110-99-350-4194
Edging File

993504194
DC/CPS/6305 TABLE 4 ITEM 39: RNCC: 2 | RNVC: 2

15 Jan 2008

5110-25-121-6496
Hand Reamer

251216496
9992401: RNCC: 3 | RNVC: 2
BV202N: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-15-144-4778
Serie 8 Scalpelli

151444778
351082: RNCC: 3 | RNVC: 2
351S8: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-27-010-6603
Hand File

270106603
99999-NIIN-DA0037247: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-99-886-2688
Hand Metal Cutting Shears

998862688
10504309N: RNCC: 3 | RNVC: 2
METS/7/7/020: RNCC: 5 | RNVC: 1

7 Jan 2013

5110-12-194-1258
Hand Reamer

121941258
DIN9-B8: RNCC: 2 | RNVC: 2
161200-8: RNCC: 3 | RNVC: 2
11673-080: RNCC: 5 | RNVC: 2
16120-8: RNCC: 5 | RNVC: 2
B8DIN9: RNCC: 5 | RNVC: 2
DIN9B8: RNCC: 5 | RNVC: 9

5 Oct 1982

5110-15-214-7797
Alesatore

152147797
ZT154-30-5/32: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-610-9882
Pipe Cutter

226109882
8852001: RNCC: 3 | RNVC: 2

14 Jul 2005

5110-21-105-2284
Hand Reamer Set

211052284
L49-070-302LC006: RNCC: 3 | RNVC: 2
S51-039: RNCC: 5 | RNVC: 2
1F108900: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-66-150-4680
File Handle

661504680
NO PRIMARY REF 66-150-4680: RNCC: 3 | RNVC: 2
00196367: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-15-184-7332
Ferro Per Sponderuo

151847332
3IANSRSQ20: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-66-010-7951
Adjustable Nut Set

660107951
MICR0SETNUTSETA8: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-15-165-4274
Scalpello In Acciai

151654274
361024: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-185-5193
Utensile Magnetico

151855193
444-4094: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-830-9407

5110-15-199-0758
Double Bow Cutting Punch

151990758
3703-24: RNCC: 3 | RNVC: 2
C3703-24: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-12-199-6148
Hand Reamer

121996148
DIN9-A20: RNCC: 2 | RNVC: 2
279218: RNCC: 3 | RNVC: 2
A20DIN9: RNCC: 5 | RNVC: 2

16 May 1984

5110-15-165-3740
Lima Tonda Da 6'

151653740
260216: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-339-1965
End Cutting Nippers

123391965
6422115ESD: RNCC: 3 | RNVC: 9
4003773025061: RNCC: 5 | RNVC: 9

24 Oct 1995

5110-99-433-4385
Diamon Glass Cutter

5110-14-397-4871
Outil De Denudage

143974871
73120000: RNCC: 3 | RNVC: 2
73020033: RNCC: 5 | RNVC: 2
R073120000: RNCC: 5 | RNVC: 2
91710800: RNCC: 5 | RNVC: 2

14 Dec 1984

5110-14-244-0642

5110-27-018-6081
Hand Reamer

270186081
3455-05136-00005: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-12-189-6055
Hand Reamer

121896055
NO PRIMARY REF 12-189-6055: RNCC: 3 | RNVC: 2
2370/10: RNCC: 5 | RNVC: 9

7 Oct 1981

5110-15-214-9865
Inserto

152149865
1578/7-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-138-0691
Tronchese Tagliente

151380691
022002: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-126-1462
Hand Reamer

121261462
NO PRIMARY REF 12-126-1462: RNCC: 3 | RNVC: 2
25DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-445-3285

5110-17-701-3789
Hand Metal Cutting Shears

177013789
2100: RNCC: 3 | RNVC: 2
2100-16: RNCC: 3 | RNVC: 2
378.500: RNCC: 3 | RNVC: 2
002912: RNCC: 5 | RNVC: 2
378.500: RNCC: 5 | RNVC: 9
1875 150MM: RNCC: 5 | RNVC: 9

21 Jan 1970

5110-12-703-1185
Hand Cold Chisel

127031185
139-01703: RNCC: 3 | RNVC: 2

5 Dec 1997

5110-15-125-7049
Tenaglia Usag 199I

151257049
199014: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-010-5202

5110-17-103-2301
Kotterboor

171032301
9612SW305: RNCC: 3 | RNVC: 2

5 Jun 1989

5110-15-173-2750
Serie Di Punzoni Ci

151732750
3300008: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-14-339-0087

5110-25-123-2322

5110-21-639-4155

5110-21-842-8373
Leather Ed Beveller

218428373
L1152: RNCC: 3 | RNVC: 2
L467: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-12-137-4108
Hand File

121374108
DIN7261-E350-1: RNCC: 2 | RNVC: 2
3152351: RNCC: 3 | RNVC: 2
513100-350: RNCC: 3 | RNVC: 2
1152-350-1: RNCC: 3 | RNVC: 2
1152W-350-1: RNCC: 5 | RNVC: 2
51310-350: RNCC: 5 | RNVC: 2
E350-1DIN7261: RNCC: 5 | RNVC: 2
DIN7261E350-1: RNCC: 5 | RNVC: 9
B350X1DIN8334: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-123-2769
Bulino Mm.125 Peso

151232769
ART2350-125: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-66-151-3253
Hand Reamer

661513253
044996: RNCC: 3 | RNVC: 2
05869709: RNCC: 5 | RNVC: 2

25 Aug 2003

5110-99-133-4875
Hand Optical Fiber Stripper

991334875
NO PRIMARY REF 99-133-4875: RNCC: 3 | RNVC: 2
FO-102-103S: RNCC: 5 | RNVC: 2
FO-102-103 S: RNCC: 5 | RNVC: 2
FO SPLICE ITEM 04: RNCC: 6 | RNVC: 9
WE123A2: RNCC: 6 | RNVC: 9

10 Aug 1995

5110-15-143-5293
Tronchesina

151435293
182002: RNCC: 3 | RNVC: 2
182: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-15-143-0915
Punteruolo Esagon.

151430915
02707267: RNCC: 3 | RNVC: 2

13 Nov 1996

5110-99-075-8461
Knife

5110-22-609-1680
Hand Reamer

226091680
013700084269: RNCC: 3 | RNVC: 2

22 Dec 2004

5110-17-701-4767
Hand Reamer

177014767
16-25H7DIN206SS: RNCC: 2 | RNVC: 1
DIN206: RNCC: 4 | RNVC: 1

27 Apr 1970

5110-15-216-2824
Mazzuola Con Testa

152162824
39590-25/1: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-141-1372
Hand Masonry Drill

121411372
NO PRIMARY REF 12-141-1372: RNCC: 3 | RNVC: 2
1456-00-00: RNCC: 5 | RNVC: 9
600006: RNCC: 5 | RNVC: 9
98-1-2-6-6: RNCC: 5 | RNVC: 9
TK-BA54-8465-056-BILD21: RNCC: 5 | RNVC: 9
8465-0061FIG6: RNCC: 5 | RNVC: 9
TL8465-0061BILD6: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-851-2530
End Cutting Nippers

218512530
1X: RNCC: 3 | RNVC: 1
5110-0871: RNCC: 5 | RNVC: 9

2 Aug 1968

5110-66-149-7471
Hand File

661497471
NO PRIMARY REF 66-149-7471: RNCC: 3 | RNVC: 2
07074709: RNCC: 5 | RNVC: 2

10 Apr 2003

5110-15-219-4386
Lima Mezzotonda Dol

152194386
07146143: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-868-1673
Ratchet Bit Brace

218681673
945: RNCC: 3 | RNVC: 2

15 Dec 1972

5110-25-132-4218
Hand Reamer

251324218
64821: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-25-106-1242
Double Bow Cutting Punch

251061242
NO PRIMARY REF25-106-1242: RNCC: 3 | RNVC: 2
1711-1303: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-98-203-8800
Craftsman's Knife

982038800
10-159: RNCC: 3 | RNVC: 2

18 Dec 1991

5110-15-136-2357
Troncabulloni Da 75

151362357
196-750: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-212-9793
Punzone Per Marcare

152129793
Y35P1: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-5069
Seghetta Traforo Pe

152085069
3VANLE5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-214-7100
Mannaia

152147100
MANNARESSI: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-189-8536
Tronchese

151898536
1188BM-130: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-209-0281
Tronchese Con Tagli

152090281
2667N: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-201-7231

5110-25-102-1244

5110-21-866-8447
Hand Hacksaw Frame

218668447
HS151: RNCC: 3 | RNVC: 2

16 Jun 1972

5110-99-960-8365
Hand Reamer

999608365
SM883: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-41-000-1014
Hand Metal Cutting Shears

410001014
10433829: RNCC: 3 | RNVC: 2
10433829: RNCC: 5 | RNVC: 9

13 Jun 2006

5110-17-701-5891
Hand Hacksaw Frame

177015891
ECLIPS150MM: RNCC: 3 | RNVC: 2
002749: RNCC: 3 | RNVC: 2
2749: RNCC: 3 | RNVC: 2

16 Apr 1974

5110-15-211-2400
Tronchesi A Doppia

152112400
1816/2: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-155-6128
Blocchetto Chiave E

151556128
(241)A5682BLO.CHI.ES.6,3X3: RNCC: 3 | RNVC: 2
BLO.CHI.ES.6,3X3: RNCC: 3 | RNVC: 2

30 Apr 2002

5110-12-313-7510
Hand Reamer

123137510
DIN206-B2,5-HSS: RNCC: 2 | RNVC: 2

30 Apr 1988

5110-15-136-3729
Coltello Per Pialla

151363729
5425-2-500-35-3: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-12-126-1887
Rund Locheisensatz

121261887
TL5110-0033-B: RNCC: 2 | RNVC: 2
8500: RNCC: 3 | RNVC: 2
1500: RNCC: 5 | RNVC: 2
B533: RNCC: 5 | RNVC: 2
5110-01016: RNCC: 6 | RNVC: 9

30 May 1969

5110-66-012-0985
Firmer Chisel

660120985
4 1-4IN X 1-4IN: RNCC: 3 | RNVC: 2
16-704: RNCC: 3 | RNVC: 2
16-146: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-99-391-0723
Bastard File

993910723
NO PRIMARY REF 99-391-0723: RNCC: 3 | RNVC: 2
SP06: RNCC: 5 | RNVC: 2

11 Dec 1995

5110-15-236-1240
Roncola In Acciaio

152361240
66870: RNCC: 3 | RNVC: 2
511015E038960: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-208-3148
Alesatore

152083148
3AAXFCFRDP8-7: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-126-2618
Taglio Acciaio Lima

151262618
3778: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-360-5149
Tube Cutter

123605149
157: RNCC: 3 | RNVC: 2
60110001: RNCC: 5 | RNVC: 2

28 May 2003

5110-66-076-9580
Hand File

660769580
6IN SMOOTH ROUND: RNCC: 3 | RNVC: 2

6 Nov 1974

5110-12-368-7604
Diagonal Cutting Pliers

123687604
72 01 140: RNCC: 3 | RNVC: 2
00.12.43.79: RNCC: 5 | RNVC: 2
4003773018247: RNCC: 5 | RNVC: 2

13 Apr 2006

5110-15-183-4894
Tenaglie Diverse

151834894
COMM631003020033: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-210-1387
Spellacavi Per Cavi

152101387
838CX58: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-17-700-9796
Firmer Gouge

177009796
1512.18: RNCC: 3 | RNVC: 2

15 May 1970

5110-66-158-8577
Chain Saw Filing Guide

661588577
505 69 81-15: RNCC: 3 | RNVC: 2
505 69 81-15: RNCC: 5 | RNVC: 2

7 Sep 2010

5110-15-136-2368
Scalpello Piatto Ne

151362368
35-150: RNCC: 3 | RNVC: 2
0035003: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-98-104-7452
Hand Cold Chisel

981047452
NO PRIMARY REF 98-104-7452: RNCC: 3 | RNVC: 2
229A: RNCC: 5 | RNVC: 2
1A910-4202: RNCC: 5 | RNVC: 2
5110-99-910-4202: RNCC: 6 | RNVC: 9

10 Dec 1973

5110-99-362-1772
Craftsman's Knife

993621772
TL-502-892: RNCC: 3 | RNVC: 2
TL-502-892: RNCC: 3 | RNVC: 9

25 Sep 2008

5110-37-514-3116
Pliers

375143116
LS-05: RNCC: 3 | RNVC: 2
LS-05: RNCC: 5 | RNVC: 2

16 Nov 2007

5110-99-667-1188
Hand File Set

996671188
505 698 125: RNCC: 3 | RNVC: 2
505 698 125: RNCC: 5 | RNVC: 2
5056981-25: RNCC: 6 | RNVC: 9
D/NSC/ES394/088/1/37: RNCC: 6 | RNVC: 9

18 Jan 1993

5110-22-121-0410
Craftsman's Knife

221210410
410-250 BECU: RNCC: 3 | RNVC: 2
410-250 BECU: RNCC: 5 | RNVC: 2
010001: RNCC: 5 | RNVC: 2

14 Jul 1989

5110-22-180-1216
12 Nedstrygerklinge

221801216
921210-24: RNCC: 3 | RNVC: 2

1 Jan 1966

5110-12-148-5978
Hand Reamer

121485978
NO PRIMARY REF 12-148-5978: RNCC: 3 | RNVC: 2
101297: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-143-4234
Punteruolo In Accia

151434234
345-4X60: RNCC: 3 | RNVC: 2
345010: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-12-361-5226
Hand Operated Cable Cutter

123615226
730100-160: RNCC: 3 | RNVC: 2
08.02950-0200: RNCC: 5 | RNVC: 2
08029500200: RNCC: 5 | RNVC: 2

13 Oct 2003

5110-14-209-3989
Hand Operated Wire Rope Cutter

142093989
NO PRIMARY REF14-209-3989: RNCC: 3 | RNVC: 2
613: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-99-439-4418

5110-98-105-2410

5110-99-717-9756
Block Plane

997179756
0220: RNCC: 3 | RNVC: 2

26 Apr 1980

5110-99-465-8159

5110-99-545-7075
Ferrule Swaging Too

5110-99-465-8126

5110-12-180-4741
Hand File

121804741
DIN7261-E100-3: RNCC: 2 | RNVC: 2
3152103: RNCC: 3 | RNVC: 2
513300-100: RNCC: 3 | RNVC: 2
1152SP-100-3: RNCC: 3 | RNVC: 2
51330-100: RNCC: 5 | RNVC: 2
1393713114004137: RNCC: 5 | RNVC: 9
0808396083439: RNCC: 5 | RNVC: 9
TGL 48-74111,100X9X3,3: RNCC: 5 | RNVC: 9
DIN7261E100-3: RNCC: 5 | RNVC: 9
E100-3DIN7261: RNCC: 5 | RNVC: 9

12 Sep 1979

5110-12-167-6911
Hand File

121676911
DIN7261-A350-2: RNCC: 2 | RNVC: 2
3112352: RNCC: 3 | RNVC: 2
510200-350: RNCC: 3 | RNVC: 2
1112-350-2: RNCC: 3 | RNVC: 2
01.76.62.08: RNCC: 5 | RNVC: 2
51020-350: RNCC: 5 | RNVC: 2
08-017-0: RNCC: 5 | RNVC: 2
A350-2DIN7261: RNCC: 5 | RNVC: 9
DIN7261A350-2: RNCC: 5 | RNVC: 9

12 Jan 1977

5110-25-103-4455
Scraper Blade

251034455
35MMFS5110-0610: RNCC: 2 | RNVC: 2
223 8460: RNCC: 5 | RNVC: 2
223-8460: RNCC: 5 | RNVC: 2
35: RNCC: 6 | RNVC: 9
204745-4: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-99-445-7979

5110-22-612-3056
Hand Wire Stripper

226123056
I45-637: RNCC: 3 | RNVC: 2

14 Dec 2005

5110-99-910-4935
Hand File

999104935
H858: RNCC: 2 | RNVC: 2
DEF1098: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-014-9435
Hand Hacksaw Blade

660149435
AS1912: RNCC: 3 | RNVC: 1
15-924: RNCC: 3 | RNVC: 2
LTF2412: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-12-391-8439
Tube Cutter

123918439
RTCT0-01-03: RNCC: 3 | RNVC: 2

11 Apr 2013

5110-66-149-9395
Craftsman's Knife

661499395
NO PRIMARY REF 66-149-9395: RNCC: 3 | RNVC: 2
00768876: RNCC: 5 | RNVC: 2

10 Apr 2003

5110-12-385-2119
Craftsman's Knife

123852119
NO PRIMARY REF 12-385-2119: RNCC: 3 | RNVC: 2
380196: RNCC: 5 | RNVC: 2

10 May 2011

5110-13-118-6961
Razor Blade Glass Scraper

131186961
400068: RNCC: 3 | RNVC: 2

10 Jul 2003

5110-99-131-1416
Hand Drill

991311416
1-03-103: RNCC: 3 | RNVC: 2
103: RNCC: 5 | RNVC: 2

11 Dec 1995

5110-12-126-2186
Hand Metal Stamping Die Set

121262186
TL5110-0028-070: RNCC: 2 | RNVC: 2
62400020: RNCC: 3 | RNVC: 2
36802: RNCC: 5 | RNVC: 9
120/0-9/2: RNCC: 5 | RNVC: 9
330-2: RNCC: 5 | RNVC: 9
330002: RNCC: 5 | RNVC: 9
DIN7353-SATZARAB-2: RNCC: 5 | RNVC: 9
78406102: RNCC: 5 | RNVC: 9
TK-KG55-5110-480-070: RNCC: 5 | RNVC: 9

30 May 1969

5110-33-155-9585
Firmer Chisel

331559585
119.140/1: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-15-143-5419
Ravvivamola

151435419
A-B-C: RNCC: 3 | RNVC: 2
ABC: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-17-110-7368
Hand Reamer

171107368
P926-0,2500-0,2220: RNCC: 3 | RNVC: 2
P926-: RNCC: 6 | RNVC: 9

18 Feb 1997

5110-13-110-5462
Hand Rasp

131105462
3778-200: RNCC: 3 | RNVC: 2

22 Sep 1976

5110-21-801-0512

5110-14-574-2437
Hand Cold Chisel Set

145742437
262A.JS4: RNCC: 3 | RNVC: 2
3148516670328: RNCC: 5 | RNVC: 2
667032: RNCC: 5 | RNVC: 2

19 Dec 2012

5110-12-126-1659

5110-21-639-6046
Compass Saw

216396046
18: RNCC: 3 | RNVC: 1
D4: RNCC: 3 | RNVC: 1
980188: RNCC: 3 | RNVC: 2
46-GP-4: RNCC: 4 | RNVC: 1
GGGS65: RNCC: 4 | RNVC: 1
4: RNCC: 5 | RNVC: 1
M212: RNCC: 5 | RNVC: 2
D-4-12: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-12-126-1245
Hand File

121261245
DIN7261-A125-3: RNCC: 2 | RNVC: 2
3112123: RNCC: 3 | RNVC: 2
A125-3DIN7261: RNCC: 5 | RNVC: 2
1112-125-3: RNCC: 5 | RNVC: 2
B125X3DIN8331: RNCC: 5 | RNVC: 9
DIN7261A125-3: RNCC: 5 | RNVC: 9
1393711119063137: RNCC: 5 | RNVC: 9
0808396186809: RNCC: 5 | RNVC: 9
TGL 48-74110,125X12,5X3,3: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-139-9128
Punteruolo Esagonal

151399128
534/125: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-21-870-2963
Hand File

218702963
39GP30TYPEY: RNCC: 4 | RNVC: 1
5110-0336: RNCC: 6 | RNVC: 9

19 Nov 1974

5110-12-139-5737

5110-15-184-6474
Tranciatrice

151846474
NSN511015R521922: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-057-5458
Diagonal Cutting Pliers

150575458
LU2460-00: RNCC: 3 | RNVC: 2
137697280: RNCC: 5 | RNVC: 2
1376-97-280: RNCC: 5 | RNVC: 2

31 Dec 1975

5110-12-129-5472
Hand Reamer

121295472
DIN206-A12-HSS: RNCC: 2 | RNVC: 2
5101HSS12: RNCC: 3 | RNVC: 2
11601HSS12: RNCC: 5 | RNVC: 2
12DIN206HSS: RNCC: 5 | RNVC: 9
A12DIN206: RNCC: 5 | RNVC: 9
DIN 206-A 12-HSS: RNCC: 5 | RNVC: 9
DIN206-A-12-HSS: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-306-1503
Kreisschnei Messer

123061503
NO PRIMARY REF 12-306-1503: RNCC: 3 | RNVC: 2
5555GNA: RNCC: 5 | RNVC: 9

30 Jan 1986

5110-99-910-5010
Hand File

999105010
COORDPATH4047: RNCC: 2 | RNVC: 2
H00973: RNCC: 5 | RNVC: 2
DEFSTAN51-11PT6: RNCC: 6 | RNVC: 9
FA13431: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-149-9402
Craftsman's Knife

661499402
NO PRIMARY REF 66-149-9402: RNCC: 3 | RNVC: 2
00492847: RNCC: 5 | RNVC: 2

10 Apr 2003

5110-41-000-0956
Hand Metal Stamping Die Set

410000956
5081-092: RNCC: 3 | RNVC: 2

1 Jun 2006

5110-15-192-6986
Taglialamiera Codol

151926986
3085-0226: RNCC: 3 | RNVC: 2

26 Mar 2010

5110-12-309-0761
Hand File

123090761
2142163: RNCC: 3 | RNVC: 2
2408-160-3: RNCC: 3 | RNVC: 2
2142-160-3: RNCC: 5 | RNVC: 2

11 Dec 1986

5110-15-066-4786
Ascia Speciale

150664786
8500494-2390: RNCC: 3 | RNVC: 2

4 Mar 1986

5110-12-131-4061
File Holder

121314061
JD5110-12-131-4061: RNCC: 3 | RNVC: 2
1419/350: RNCC: 5 | RNVC: 9
575B901-350: RNCC: 5 | RNVC: 9
BH125/350: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-149-7457
Hand File

661497457
NO PRIMARY REF 66-149-7457: RNCC: 3 | RNVC: 2
07097508: RNCC: 5 | RNVC: 2

8 Apr 2003

5110-22-601-9215
Hand Graver

226019215
06109: RNCC: 3 | RNVC: 2

5 Nov 2002

5110-14-407-8828

5110-14-409-0216

5110-12-126-1645
Hand File

121261645
DIN7262-D125-2: RNCC: 2 | RNVC: 2
1231125: RNCC: 3 | RNVC: 2
1231-125-2: RNCC: 3 | RNVC: 2
1231-125-2: RNCC: 5 | RNVC: 2
D125-2DIN7262: RNCC: 5 | RNVC: 2
B125EINHIEB2DIN8336: RNCC: 5 | RNVC: 9
DIN7262D125-2: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-109-3200
Hand Operated Wire Rope Cutter

661093200
NC-4.0A: RNCC: 3 | RNVC: 2
NISIDA NC-4.0A: RNCC: 5 | RNVC: 2
NC-4.0A: RNCC: 5 | RNVC: 2
NC3-0A: RNCC: 5 | RNVC: 2

19 Oct 1983

5110-12-130-9625
Ven Schneideinsatz

121309625
21861130: RNCC: 3 | RNVC: 2
218.61.130: RNCC: 5 | RNVC: 2
900-5VD3B3: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-120-6198
Hand File

121206198
299B-350-3: RNCC: 3 | RNVC: 2
299B350FEIN: RNCC: 5 | RNVC: 2
299B350ZAHNUNG3: RNCC: 5 | RNVC: 2
107647: RNCC: 5 | RNVC: 9
3779: RNCC: 5 | RNVC: 9
3779-360: RNCC: 5 | RNVC: 9

30 May 1969

5110-25-144-9129
Craftsman's Knife

251449129
8726HFK: RNCC: 3 | RNVC: 2
KNIV,INFANTERIST: RNCC: 6 | RNVC: 9

1 Dec 1994

5110-22-618-1444
Craftsman's Knife

226181444
6079: RNCC: 3 | RNVC: 2

23 Oct 2008

5110-21-899-4768
Pulling Bar

218994768
ZT2052-3/32: RNCC: 3 | RNVC: 2
ZT2052-3-32: RNCC: 5 | RNVC: 2

6 Aug 1985

5110-12-391-8438
Tube Cutter

123918438
RTCT0-01-02: RNCC: 3 | RNVC: 2

11 Apr 2013

5110-37-517-9258
Bearing Scraper

375179258
KM2590-1196-2: RNCC: 2 | RNVC: 2
60560204-33: RNCC: 3 | RNVC: 2
60560204-7: RNCC: 3 | RNVC: 2
KM9808512: RNCC: 3 | RNVC: 2
60560204: RNCC: 3 | RNVC: 2
KM9808512: RNCC: 3 | RNVC: 2

30 Jun 2009

5110-15-213-3268
Lima Piatta Paralle

152133268
1-100-08-2-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-282-9179
Thread Restorer File

142829179
237.C: RNCC: 3 | RNVC: 2
385-W: RNCC: 3 | RNVC: 2
385W: RNCC: 3 | RNVC: 2
3053WHITW0RTH: RNCC: 3 | RNVC: 9
237C: RNCC: 5 | RNVC: 2
3148511549407: RNCC: 5 | RNVC: 2
3272670216938: RNCC: 5 | RNVC: 2
0154940: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-15-144-3475
Lima Ad Ago Taglio

151443475
2300D160E: RNCC: 3 | RNVC: 2
2644-160-5: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-12-342-0873
Hand Reamer

123420873
P-245001-410-19G-001-033: RNCC: 3 | RNVC: 2

10 Dec 1996

5110-21-105-2222
Hand Reamer

211052222
140: RNCC: 3 | RNVC: 1
B174-2: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1

4 Jun 1968

5110-12-317-9880
Nozzle Broach

123179880
7300017-50: RNCC: 2 | RNVC: 2
4.901-043.0: RNCC: 3 | RNVC: 2
4.901-043: RNCC: 5 | RNVC: 9

1 Jun 1989

5110-22-100-0065
Single Bit Ax Handle

221000065
881024: RNCC: 3 | RNVC: 2
5702268810241: RNCC: 5 | RNVC: 2
DSI SKAFT-540/2: RNCC: 5 | RNVC: 9
11.76-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-66-153-5737
Hand Reamer Set

661535737
NALM00041-1: RNCC: 3 | RNVC: 2
NALM00041-1: RNCC: 5 | RNVC: 2
0500700 THRU 050075: RNCC: 6 | RNVC: 9

15 Sep 2005

5110-66-013-5393
Hand Masonry Drill

660135393
HAMMERTWIST: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-99-120-0445
Firmer Chisel

991200445
DEF STAN 51-11:PART 27: RNCC: 4 | RNVC: 1
BS1943: RNCC: 4 | RNVC: 1
M373-12MM: RNCC: 5 | RNVC: 2
BS1943-TABLE1A: RNCC: 6 | RNVC: 9
TABLE1A: RNCC: 6 | RNVC: 9
14616: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-213-3045
Lima Ad Ago Piatta

152133045
2-300-14-4-0: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-501-1875
Seatbelt Cutter

995011875
61229: RNCC: 3 | RNVC: 2
5010559612291: RNCC: 5 | RNVC: 2
T-61229: RNCC: 5 | RNVC: 2
CV171221: RNCC: 5 | RNVC: 2

23 May 2012

5110-99-887-3953
Inserter Cutting To

998873953
U710-ICT10: RNCC: 3 | RNVC: 2
GE7000 1602-7: RNCC: 5 | RNVC: 2

10 Aug 1996

5110-37-509-1626
Hand Hacksaw Blade

375091626
KS-B-3161 300X12X0.64: RNCC: 2 | RNVC: 2

23 Aug 2002

5110-32-001-1473
Bow Saw

320011473
SAF-SP-S-0017: RNCC: 4 | RNVC: 1

5 Nov 1976

5110-66-098-3135
Hand Cold Chisel

660983135
BS 3066: RNCC: 3 | RNVC: 1
27314: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
3156-0: RNCC: 5 | RNVC: 9

28 Jul 1978

5110-27-010-6572
Hand File

270106572
99999-NIIN-DA0014388: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-185-3427
Forbice Tagliacampi

151853427
FORBICE-TAGLIACAMPIONIPICOTAR: RNCC: 3 | RNVC: 2
FORBICETAGLIACAMPIONIPICOTAR: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-305-1603
Craftsman's Knife

123051603
TL5110-0041-002: RNCC: 2 | RNVC: 2
143691: RNCC: 3 | RNVC: 2
9855155: RNCC: 3 | RNVC: 2
06L8754: RNCC: 5 | RNVC: 2
TYP 845 (L139.200): RNCC: 5 | RNVC: 2
4003773022558: RNCC: 5 | RNVC: 2
9855: RNCC: 5 | RNVC: 9
84500: RNCC: 5 | RNVC: 9

3 Oct 1985

5110-21-759-2050
Exposed Blade Tube Deburring Tool

217592050
J2185-24: RNCC: 3 | RNVC: 2

26 Mar 1965

5110-66-028-5384
Pliers

660285384
RE1200-30: RNCC: 3 | RNVC: 2
EC54RP: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-99-910-6449
Stencil Cut Die Set

999106449
NO PRIMARY REF 99-910-6449: RNCC: 3 | RNVC: 2
C1S100: RNCC: 5 | RNVC: 2
FA17762: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-4878
Hand File

999104878
DEF1098: RNCC: 4 | RNVC: 1
H20673: RNCC: 5 | RNVC: 2
9104878: RNCC: 6 | RNVC: 9
1A909: RNCC: 6 | RNVC: 9
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
F1FA13352: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-176-7155
Scalpello X Legno A

151767155
5002-20: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-27-010-6632
Hand File

270106632
99999-NIIN-DA0037291: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-37-510-0802
Bent Trimmers Shears

375100802
604(6 3/4"): RNCC: 3 | RNVC: 1
604(6 3/4"): RNCC: 3 | RNVC: 9
604(6 3/4"): RNCC: 3 | RNVC: 9

16 Sep 2003

5110-21-886-7126
Dimpling Punch

218867126
ZT1865-#6: RNCC: 3 | RNVC: 2
ZT1865-6: RNCC: 5 | RNVC: 2

9 Nov 1981

5110-12-126-1263
Hand File

121261263
DIN7261-E350-2: RNCC: 2 | RNVC: 2
3152352: RNCC: 3 | RNVC: 2
513200-350: RNCC: 3 | RNVC: 2
1152-350-2: RNCC: 3 | RNVC: 2
51320-350: RNCC: 5 | RNVC: 2
E350-2DIN7261: RNCC: 5 | RNVC: 2
1156-350-2: RNCC: 5 | RNVC: 9
B375X2DIN8334: RNCC: 5 | RNVC: 9
DIN7261E350-2: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-280-1823
A Main Lime

5110-14-270-3950
A Main Alesoir

5110-15-208-3822
Alesatore

152083822
3AARFCFRDP15-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-851-2316
Hand File

218512316
39GP53: RNCC: 4 | RNVC: 1
5110-0651: RNCC: 5 | RNVC: 9

6 Oct 1968

5110-66-028-5398
Hand Wire Stripper

660285398
RE1200-33J: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-21-849-8074
Hand File

218498074
5110-0636: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-230-8125
Tronchese A Taglien

152308125
188I-180: RNCC: 3 | RNVC: 2
511015E095869: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-21-639-6336
Plane Iron

216396336
12-006-4: RNCC: 3 | RNVC: 2
S2: RNCC: 5 | RNVC: 9

25 May 1968

5110-12-135-5861
Craftsman's Knife

121355861
510065: RNCC: 2 | RNVC: 2
5110-0012: RNCC: 5 | RNVC: 9
5110-012: RNCC: 5 | RNVC: 9
TL5110-0012: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-172-7935
Diagonal Cutting Pliers

121727935
TL 5110-0025-030: RNCC: 2 | RNVC: 2
7101200: RNCC: 3 | RNVC: 2
00.12.95.34: RNCC: 5 | RNVC: 2
4003773010067: RNCC: 5 | RNVC: 2
2669D: RNCC: 5 | RNVC: 9
0808393312689: RNCC: 5 | RNVC: 9
7101-200: RNCC: 5 | RNVC: 9
106625: RNCC: 5 | RNVC: 9
1393211122248027: RNCC: 5 | RNVC: 9
TGL 48-72134,200,OB 246: RNCC: 5 | RNVC: 9

20 Feb 1978

5110-22-221-3876
Hand File

222213876
OEBERG 2-306-16-1: RNCC: 5 | RNVC: 2
KAP.01: RNCC: 5 | RNVC: 9
NAALEFIL: RNCC: 5 | RNVC: 9

12 Dec 1972

5110-99-702-3798
Craftsman's Knife

997023798
5-10-150: RNCC: 3 | RNVC: 2
536-004: RNCC: 5 | RNVC: 2

22 May 1997

5110-15-155-9071
Adz

151559071
(241)A9227E0000204: RNCC: 3 | RNVC: 2
E 00002 04: RNCC: 3 | RNVC: 2
40.01.07: RNCC: 3 | RNVC: 2

17 Sep 2002

5110-15-155-9446
Adz

151559446
(241)A580949109575: RNCC: 3 | RNVC: 2
4 91095 75: RNCC: 3 | RNVC: 2

11 Oct 2002

5110-15-216-1714
4 5X0 Filiera Skf 2

152161714
SKF2-5X0-45: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-32-068-6486
Cape Chisel

320686486
335-150289-C: RNCC: 3 | RNVC: 2

3 Jul 1996

5110-37-555-3150
Driver

375553150
HS01502-10-4: RNCC: 5 | RNVC: 1

22 Mar 2004

5110-14-229-2680
Outil De Tour Pour

142292680
VTR250-1099: RNCC: 3 | RNVC: 2

1 Jan 1967

5110-15-002-4748
Retention Jaws

150024748
CBC-41-0801F: RNCC: 3 | RNVC: 2

29 Aug 2013

5110-98-104-1205
Hand Hacksaw Blade

981041205
300MM 32TPI BI-METAL: RNCC: 3 | RNVC: 1
1232 RABONE: RNCC: 3 | RNVC: 2
FH1232 HICUT ECLIPSE: RNCC: 6 | RNVC: 9

1 Jun 1990

5110-21-851-2627
Wood Scraper

218512627
3010: RNCC: 3 | RNVC: 2
10: RNCC: 5 | RNVC: 2
5110-1131: RNCC: 6 | RNVC: 9

6 Oct 1968

5110-14-264-6128
Hand Masonry Drill

142646128
1112-10: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-98-200-9270
Reamer Blade Set

982009270
NO PRIMARY REF 98-200-9270: RNCC: 3 | RNVC: 2
ST 17: RNCC: 5 | RNVC: 2

20 Feb 1987

5110-12-129-3897
Hand Reamer

121293897
DIN859-B23,5-HSS: RNCC: 2 | RNVC: 2
415-23,50: RNCC: 3 | RNVC: 2
11606999-23,5: RNCC: 3 | RNVC: 2
011011-23,5: RNCC: 3 | RNVC: 2
23-5DIN859SCHNELLARBEITSSTAHLSP-: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-639-6540
Hand Drill

216396540
03-803: RNCC: 3 | RNVC: 2
2-01: RNCC: 5 | RNVC: 2
610/2: RNCC: 5 | RNVC: 2
624: RNCC: 5 | RNVC: 9
2A: RNCC: 5 | RNVC: 9

25 May 1968

5110-99-662-9324
Hand Reamer

996629324
O/J7284: RNCC: 3 | RNVC: 2
MBJ7284: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-15-210-4461
Serie Di Nr 6 Punte

152104461
ART-507: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-607-3288
Hand File

226073288
1-170-12-1-0: RNCC: 3 | RNVC: 2
8020057: RNCC: 3 | RNVC: 2

8 Jun 2004

5110-25-133-0340

5110-99-499-7631
Hand Reamer

994997631
ME02071/358/24H PART E: RNCC: 3 | RNVC: 2
ME02071-358-24HPARTE: RNCC: 5 | RNVC: 2

20 Mar 2001

5110-15-209-0853
Sega Tagliacornici

152090853
1-45-25-31: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-196-4999
Hand File

121964999
DIN7261-A400-3: RNCC: 2 | RNVC: 2
3112403: RNCC: 3 | RNVC: 2
1112-400-3: RNCC: 5 | RNVC: 2
A400-3DIN7261: RNCC: 5 | RNVC: 2
DIN7261A400-3: RNCC: 5 | RNVC: 9

12 Jul 1983

5110-22-610-5089
Hand File

226105089
1-230-06-3-3: RNCC: 3 | RNVC: 2

27 May 2005

5110-17-110-7366
Hand Reamer

171107366
P926-0,2190-0,2030: RNCC: 3 | RNVC: 2
P926-: RNCC: 6 | RNVC: 9

18 Feb 1997

5110-99-910-5302
End Cutting Nippers

999105302
UKD1SPR0V48: RNCC: 4 | RNVC: 1
DEFSTAN51-10: RNCC: 6 | RNVC: 9
1098: RNCC: 6 | RNVC: 9
FA15363: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-5292
Trimming Knife

999105292
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H1529: RNCC: 6 | RNVC: 9
H1529: RNCC: 6 | RNVC: 9
FA1494: RNCC: 6 | RNVC: 9
910-5292: RNCC: 6 | RNVC: 9
1B1507: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-22-610-5062
Hand File

226105062
1-230-08-2-3: RNCC: 3 | RNVC: 2

27 May 2005

5110-21-814-6439
Dimpling Die

218146439
ZT1853-5/32: RNCC: 3 | RNVC: 2
ZT1853-5-32: RNCC: 5 | RNVC: 2

13 Jun 1964

5110-99-910-5299
End Cutting Nippers

999105299
UKD1SPR0V48: RNCC: 4 | RNVC: 1
H20310: RNCC: 5 | RNVC: 2
FA19424: RNCC: 6 | RNVC: 9
910-5299: RNCC: 6 | RNVC: 9
1J180: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-209-2852
Frattone Rett. Lama

152092852
35255590: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-165-4047
Raschietto Per Meta

151654047
32745350: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-184-7317
Ferro Semplice Per

151847317
3IANSRSE38: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-220-1098
Pialla A Legno

152201098
EXRN0401728: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-868-0139
Craftsm Knife Blade

218680139
489B71: RNCC: 3 | RNVC: 2
200-11-620: RNCC: 5 | RNVC: 9

14 Jul 1972

5110-13-118-0052
Firmer Chisel

131180052
424P-35: RNCC: 3 | RNVC: 2
7311518238452: RNCC: 5 | RNVC: 2
00.07.20.41: RNCC: 5 | RNVC: 2

8 Nov 2000

5110-21-637-5203
Hand Reamer

216375203
140: RNCC: 3 | RNVC: 1
B174-2: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1

6 Jun 1968

5110-15-134-5571
Lima Triangolare Do

151345571
2603-3-10: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-14-244-0839

5110-12-167-5030
Hand- Fraeser

121675030
1687910006: RNCC: 3 | RNVC: 2
9689160155: RNCC: 5 | RNVC: 2
KDEP2955: RNCC: 5 | RNVC: 9

23 Dec 1976

5110-99-434-7224

5110-98-102-3381
Thread Restorer File

981023381
FILE,THREAD RESTORER 12-26 TPI: RNCC: 3 | RNVC: 1
015600 SYKES-P: RNCC: 3 | RNVC: 2

15 Dec 1978

5110-34-037-5974
Paper Cutter

340375974
36-CHC: RNCC: 5 | RNVC: 2

20 Jun 2008

5110-21-639-4850
Hand File

216394850
39GP53: RNCC: 4 | RNVC: 1

29 Oct 1963

5110-14-423-9856
Hand Diamond Point Chisel

144239856
49-175: RNCC: 3 | RNVC: 2
M0B49-175: RNCC: 5 | RNVC: 2
MOB49-175: RNCC: 5 | RNVC: 2
91616394: RNCC: 5 | RNVC: 2

5 May 1988

5110-99-924-2681
Tinner's Hollow Cutting Punch

999242681
NO PRIMARY REF 99-924-2681: RNCC: 3 | RNVC: 2
01-2549: RNCC: 5 | RNVC: 2
FIG4499: RNCC: 6 | RNVC: 9
0275-13215: RNCC: 6 | RNVC: 9
0275-924-2681: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-150-4685
File Handle

661504685
NO PRIMARY REF 66-150-4685: RNCC: 3 | RNVC: 2
07188103: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-99-968-1678
Engineer Scraper

999681678
NO PRIMARY REF 99-968-1678: RNCC: 3 | RNVC: 2
99A (ECLIPSE): RNCC: 5 | RNVC: 2

11 Dec 1995

5110-99-541-4162
Hand Stencil Cutting Die Set

995414162
STAMPSSTEELF1G0T09-5MMH1GH: RNCC: 3 | RNVC: 2
AS600837: RNCC: 5 | RNVC: 1

25 Apr 1991

5110-21-105-2216
Hand Reamer

211052216
140: RNCC: 3 | RNVC: 1
B174-2: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1

4 Jun 1968

5110-15-208-4882
Pialla

152084882
5PLECHSE48: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-165-3852
Lima Per Meccanica

151653852
256438: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-21-895-4184
Hand File

218954184
HB5: RNCC: 3 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

20 Feb 1984

5110-14-394-4103

5110-14-562-6405
Hand Wire Stripper

145626405
OCE26-291: RNCC: 3 | RNVC: 2

10 Nov 2009

5110-27-010-6600
Hand File

270106600
99999-NIIN-DA0037237: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-27-010-6717
Hand File

270106717
99999-NIIN-DA0037087: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-22-617-5184
Hand File Set

226175184
DA8407-126: RNCC: 3 | RNVC: 2

1 Jul 2008

5110-99-428-9620

5110-99-428-9646

5110-15-054-1397
Bucksaw Blade

150541397
56-5-650-600: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-21-849-9353
Two Man Crosscut Saw

218499353
520: RNCC: 3 | RNVC: 1
5110-1039: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-13-102-8947
Hand Reamer

131028947
A175-1M0RSEAFSTR: RNCC: 3 | RNVC: 9
LETIGRE7310-1: RNCC: 5 | RNVC: 2

1 Apr 1975

5110-12-347-6314
Hand Reamer

123476314
DIN206-B1,6-HSS: RNCC: 2 | RNVC: 2

18 Jan 1999

5110-12-126-1383
Double Bow Cutting Punch

121261383
DIN7200-A17: RNCC: 2 | RNVC: 2
0100170: RNCC: 3 | RNVC: 2
240-17: RNCC: 3 | RNVC: 2
TS5110-0821: RNCC: 5 | RNVC: 1
00.09.02.29: RNCC: 5 | RNVC: 2
240080: RNCC: 5 | RNVC: 2
A17DIN7200: RNCC: 5 | RNVC: 2
TS5110-0821-17MM: RNCC: 5 | RNVC: 2
DIN7200A17: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-123-0125
Plane Cutter Bit

121230125
DIN5145-A48: RNCC: 2 | RNVC: 2
A48DIN5145: RNCC: 5 | RNVC: 2
DIN5145A48: RNCC: 5 | RNVC: 9

30 May 1969

5110-25-100-4174
Hand Masonry Drill Holder

251004174
NO PRIMARY REF25-100-4174: RNCC: 3 | RNVC: 2
40-5640-100-100: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-17-029-9480
Hand File

170299480
TVA5110-2-263-005-1.1.10: RNCC: 3 | RNVC: 2
TVA5110-2-263-005: RNCC: 5 | RNVC: 1
12100803: RNCC: 5 | RNVC: 2

17 Jun 1972

5110-15-125-8638
Scalpello Per Legno

151258638
8252/6: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-338-3807

5110-22-609-3727
Pliers

226093727
EREM515D: RNCC: 3 | RNVC: 2

19 Jan 2005

5110-12-177-5816
Locheisen

121775816
6888-4X20: RNCC: 3 | RNVC: 9

7 Feb 1979

5110-12-161-8905
End Cutting Nippers

121618905
NO PRIMARY REF 12-161-8905: RNCC: 3 | RNVC: 2
134236: RNCC: 5 | RNVC: 9
2658TT: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-607-3269
Hand File

226073269
1-170-04-3-0: RNCC: 3 | RNVC: 2
8019952: RNCC: 3 | RNVC: 2

8 Jun 2004

5110-25-114-3473
Hand File Set

251143473
0901801: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-22-607-3164
Hand File

226073164
4-138-08-1-0: RNCC: 3 | RNVC: 2
8019662: RNCC: 3 | RNVC: 2

5 Jun 2004

5110-15-186-5464
Punzone Grand. Mm 2

151865464
ART-3616/1-MM2: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-21-639-4908
Firmer Chisel

216394908
85-1 1/2: RNCC: 3 | RNVC: 1
M444: RNCC: 3 | RNVC: 1
16-558: RNCC: 3 | RNVC: 2
GGGC311: RNCC: 4 | RNVC: 1
5002C1 1-2: RNCC: 5 | RNVC: 9
720: RNCC: 5 | RNVC: 9
230: RNCC: 5 | RNVC: 9
REVB: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-25-102-1246
Hand Metal Stamping Die Set

251021246
FS 5110-0789 POS 3: RNCC: 2 | RNVC: 2
221 2820: RNCC: 5 | RNVC: 2
221-2820: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-99-137-6812
Hand Reamer

991376812
REAMER2-8MMSTRAIGHTFLUTE: RNCC: 3 | RNVC: 2
BS122PT2T6: RNCC: 5 | RNVC: 1

25 Apr 1991

5110-21-808-8298
Hand Metal Stamping Die Set

218088298
MS16534-3: RNCC: 2 | RNVC: 2
101: RNCC: 3 | RNVC: 1
1350: RNCC: 3 | RNVC: 1
GGGD280: RNCC: 3 | RNVC: 1
1F140850: RNCC: 6 | RNVC: 9
313413: RNCC: 6 | RNVC: 9

9 Nov 1968

5110-99-942-0319
Hand Reamer

999420319
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16514: RNCC: 6 | RNVC: 9
1B5190: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-210-6746
Tagliatubi X Tubi R

152106746
B2420/1-25: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-612-7905
Drill

996127905
JE20070-097-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-13-103-0409
Hand File

131030409
NBN496A6-300A2: RNCC: 2 | RNVC: 2

1 Apr 1975

5110-99-942-0336
Hand Reamer

999420336
BS122PT2: RNCC: 4 | RNVC: 1
H02098: RNCC: 5 | RNVC: 2
DEFSTAN51-9: RNCC: 6 | RNVC: 9
3/16" HAND TAPER PIN REAMER: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-639-5213
Hand Cape Chisel

216395213
72 5/16: RNCC: 3 | RNVC: 2
39GP43: RNCC: 4 | RNVC: 1
150-3/16: RNCC: 5 | RNVC: 2

23 Nov 1966

5110-12-300-8646
Hand File

123008646
2411-160-3: RNCC: 3 | RNVC: 2
2102163: RNCC: 3 | RNVC: 2
2102-160-3: RNCC: 5 | RNVC: 2

5 Sep 1984

5110-17-120-3447
Craftsman's Knife

171203447
0317-15,50 FRIEDRICH HERDER: RNCC: 3 | RNVC: 2

5 Apr 2007

5110-99-910-5747
Hand Hacksaw

999105747
H5001: RNCC: 3 | RNVC: 2
H20217: RNCC: 5 | RNVC: 2
FA16660: RNCC: 6 | RNVC: 9
1L34: RNCC: 6 | RNVC: 9
51-11PT7: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-890-3301
Cleaning Needle

218903301
1600-0294-84: RNCC: 3 | RNVC: 2
1600 0294 84: RNCC: 5 | RNVC: 2

12 Sep 1982

5110-21-849-7994
Rigid Handle Machete

218497994
2: RNCC: 3 | RNVC: 2
5110-0861: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-15-215-3044
Barretta Acciaio Tr

152153044
F778/5-14: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-25-116-5346
Hand File

251165346
FS 5110-0645 POS 2: RNCC: 2 | RNVC: 2
275: RNCC: 3 | RNVC: 2
0RSA275: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-14-471-9887
End Cutting Nippers

144719887
491.14EL: RNCC: 3 | RNVC: 2
0179700: RNCC: 5 | RNVC: 2
3148511797006: RNCC: 5 | RNVC: 2
491-14EL: RNCC: 5 | RNVC: 2
491.14 EL: RNCC: 5 | RNVC: 2
0715 02 01: RNCC: 5 | RNVC: 2

28 Sep 1994

5110-37-556-1375
Wire Strap

375561375
1 9012-01-5: RNCC: 5 | RNVC: 1

22 Mar 2004

5110-22-604-0051
File Handle

226040051
8191269: RNCC: 3 | RNVC: 2
9-488-01-1P: RNCC: 5 | RNVC: 2

11 Jun 2003

5110-22-121-9138
Diagonal Cutting Pliers

221219138
2191S-160: RNCC: 3 | RNVC: 2

29 Mar 1993

5110-12-171-0446
Hand Metal Cutting Shears

121710446
NO PRIMARY REF 12-171-0446: RNCC: 3 | RNVC: 2
8095: RNCC: 5 | RNVC: 9

1 Sep 1977

5110-12-120-6150
Firmer Chisel

121206150
NO PRIMARY REF 12-120-6150: RNCC: 3 | RNVC: 2
B12HLDIN5141: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-388-8963
Ax Holder

123888963
1003708: RNCC: 3 | RNVC: 2
SK913-053050.000.0: RNCC: 5 | RNVC: 2
4615800222: RNCC: 5 | RNVC: 2

3 May 2012

5110-99-794-8576
Hand Operated Wire Rope Cutter

997948576
NO PRIMARY REF 99-794-8576: RNCC: 3 | RNVC: 2
SEM/HERC/200-9: RNCC: 5 | RNVC: 2
001GH-24: RNCC: 6 | RNVC: 9

24 Jul 2000

5110-12-131-7002
Ha Fuehrungsbuchse

121317002
140.08.600: RNCC: 3 | RNVC: 2
200-48: RNCC: 5 | RNVC: 9
200-48V8-9-9-5: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-910-4206
Hand Cold Chisel

999104206
4017: RNCC: 3 | RNVC: 2
BS3066-TABLE 3: RNCC: 4 | RNVC: 1
H20278: RNCC: 5 | RNVC: 2
FA11252: RNCC: 6 | RNVC: 9
FA11263: RNCC: 6 | RNVC: 9
910-4206: RNCC: 6 | RNVC: 9
1A3828: RNCC: 6 | RNVC: 9
1A402: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-858-9162
Single Bit Ax

998589162
2 0085-116: RNCC: 3 | RNVC: 2

15 Mar 2007

5110-12-194-1257
Hand Reamer

121941257
DIN9-B6: RNCC: 2 | RNVC: 2
501-FORM B-6,0: RNCC: 3 | RNVC: 2
DIN9B6: RNCC: 5 | RNVC: 9
16120-6: RNCC: 5 | RNVC: 9
B6DIN9: RNCC: 5 | RNVC: 9

5 Oct 1982

5110-99-272-2901
Pocket Knife

992722901
DC/CPS/6300 TABLE 4 ITEM 7: RNCC: 4 | RNVC: 1

15 Jan 2008

5110-15-213-3272
Lima Triangolare Ta

152133272
1-170-08-2-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-110-5153
Pliers

151105153
2185-160: RNCC: 3 | RNVC: 2

7 Sep 1989

5110-15-124-8970
Lame Per Seghetto

151248970
12"X13 ZP": RNCC: 3 | RNVC: 2
12"X13 ZP": RNCC: 5 | RNVC: 9

8 Oct 1996

5110-21-889-5417
Compass Saw Blade

218895417
D-693: RNCC: 3 | RNVC: 2
D693: RNCC: 5 | RNVC: 2

14 Jun 1982

5110-15-141-1938
Raschietto A Grattu

151411938
0-21-115: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-14-397-7230

5110-15-183-4276
Lima

151834276
990USAG: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-208-4853
Butteruolo Per Riba

152084853
4BMN6: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-19-003-1252
Hand Hacksaw Blade

190031252
RS1224: RNCC: 3 | RNVC: 2

10 Jul 2008

5110-99-788-8472
Hand Metal Cutting Shears

997888472
G245S/12: RNCC: 3 | RNVC: 2

23 Feb 1988

5110-27-011-3980
Hand File

270113980
99999-NIIN-DA0037171: RNCC: 2 | RNVC: 1
OZG96: RNCC: 2 | RNVC: 1
OZG96: RNCC: 5 | RNVC: 2

20 Jan 2003

5110-14-298-7822
A Monture Scie

142987822
NO PRIMARY REF14-298-7822: RNCC: 3 | RNVC: 2
232TM80-155LI0N80: RNCC: 5 | RNVC: 2
232TM80-155LI0N80: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-17-707-4871
Firmer Chisel

177074871
1031/951-1 1/2IN: RNCC: 3 | RNVC: 2
425-38: RNCC: 5 | RNVC: 2
71 1131 38: RNCC: 5 | RNVC: 2

25 Dec 1972

5110-14-298-7825
A Monture Scie

142987825
25670M: RNCC: 3 | RNVC: 9
256-700: RNCC: 5 | RNVC: 2
256TM75-202: RNCC: 5 | RNVC: 2
256-700: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-33-004-2470
Hoja C.Bayoneta

330042470
1005-000151: RNCC: 3 | RNVC: 2

27 Oct 1998

5110-22-607-3856
Hand File

226073856
1-320-12-2-0: RNCC: 3 | RNVC: 2
1-320-12-2-3: RNCC: 3 | RNVC: 2

12 Jun 2004

5110-22-608-1141
Hand File

226081141
1-110-08-2-3: RNCC: 3 | RNVC: 2

9 Sep 2004

5110-25-101-1103
Hand Cold Chisel

251011103
NO PRIMARY REF25-101-1103: RNCC: 3 | RNVC: 2
217025-6: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-22-607-3272
Hand File

226073272
1-170-08-3-0: RNCC: 3 | RNVC: 2
8020019: RNCC: 3 | RNVC: 2

8 Jun 2004

5110-66-149-6414
Craftsman's Knife

661496414
NO PRIMARY REF 66-149-6414: RNCC: 3 | RNVC: 2
119-2: RNCC: 5 | RNVC: 2

8 Apr 2003

5110-99-721-2596
Trimming Knife

997212596
NO PRIMARY REF 99-721-2596: RNCC: 3 | RNVC: 2
546-742: RNCC: 5 | RNVC: 2
DB2890: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-15-124-3507
Archetto Per Seghet

151243507
2764: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-175-3952
Piccozza Saldature

151753952
PICCOZZA SALDATURE: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-16-006-2771
Hand File

160062771
12211: RNCC: 3 | RNVC: 2
505698161: RNCC: 3 | RNVC: 2

14 Jul 2009

5110-15-202-9138
Tronchese Frontale

152029138
245-0485: RNCC: 3 | RNVC: 2
(241)AA136245-0485: RNCC: 5 | RNVC: 2

25 Sep 2007

5110-12-127-7396
Single Bow Cutting Punch

121277396
DIN7200-B26: RNCC: 2 | RNVC: 2
B26DIN7200: RNCC: 5 | RNVC: 2
DIN7200B26: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-121-4105
Hand File

121214105
DIN7261-C350-1: RNCC: 2 | RNVC: 2
3132351: RNCC: 3 | RNVC: 2
1132-350-1: RNCC: 3 | RNVC: 2
C350-1DIN7261: RNCC: 5 | RNVC: 2
TGL 48-74112,350X22,5,1: RNCC: 5 | RNVC: 9
A350X1DIN8335: RNCC: 5 | RNVC: 9
DIN7261C350-1: RNCC: 5 | RNVC: 9
1393714117178110: RNCC: 5 | RNVC: 9
0808396469059: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-637-5435
Hand Reamer

216375435
B94-2: RNCC: 3 | RNVC: 1
B174-2: RNCC: 3 | RNVC: 1
1613: RNCC: 3 | RNVC: 1
712-049915: RNCC: 3 | RNVC: 2
B5-14: RNCC: 4 | RNVC: 1
50-10981: RNCC: 5 | RNVC: 9

4 Jun 1968

5110-12-309-0768
Hand File

123090768
2162163: RNCC: 3 | RNVC: 2
2162-160-3: RNCC: 5 | RNVC: 2
2410-160-3: RNCC: 5 | RNVC: 9

11 Dec 1986

5110-21-637-5303
Hand Reamer

216375303
B174-2: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
50-10947: RNCC: 3 | RNVC: 2
GGGR180: RNCC: 4 | RNVC: 1
4500 23-32: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-99-676-6934
Bearing Scraper

996766934
OD/2/201272: RNCC: 3 | RNVC: 2

25 Jun 2013

5110-12-185-8352
Gehrungsschneidlade

121858352
3460-250: RNCC: 3 | RNVC: 9
67778101: RNCC: 3 | RNVC: 9
318: RNCC: 5 | RNVC: 9
318-250: RNCC: 5 | RNVC: 9

1 Nov 1980

5110-99-052-1868
Hand Optical Fiber Cleaving Tool

990521868
FCP-21: RNCC: 3 | RNVC: 2
SE2445: RNCC: 5 | RNVC: 2
97PK02056: RNCC: 6 | RNVC: 9

5 Nov 1997

5110-15-221-4728
Scalpello

152214728
EX5110RI7422040: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-210-4787
Fustella

152104787
EX5110RN0406426: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-221-4597
Hand Cold Chisel

222214597
8IN,PROFIL 20X13MM: RNCC: 3 | RNVC: 2

8 Jan 1973

5110-14-340-6306

5110-21-866-3167
Single Bow Cutting Punch

218663167
500SIZE4A: RNCC: 3 | RNVC: 2

19 May 1972

5110-12-121-4212
Hand File

121214212
1284-200-3: RNCC: 3 | RNVC: 2
305-200-3: RNCC: 3 | RNVC: 2
B200X3DIN8340: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-230-4237
Scalpello In Legno

152304237
6050/2-24: RNCC: 3 | RNVC: 2
511015E094222: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-99-910-5827
Bearing Scraper

999105827
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H20333: RNCC: 5 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H2227: RNCC: 6 | RNVC: 9
H2227: RNCC: 6 | RNVC: 9
FA16723: RNCC: 6 | RNVC: 9
H2227: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-335-6824
Hand Metal Stamping Die Set

143356824
1-01-27-010: RNCC: 3 | RNVC: 2

30 Jun 1976

5110-22-607-3749
Hand File

226073749
1-320-08-2-0: RNCC: 3 | RNVC: 2
1-320-08-2-3: RNCC: 3 | RNVC: 2
8191276: RNCC: 3 | RNVC: 2

11 Jun 2004

5110-15-208-3803
Alesatore

152083803
3AAXFCFRDP15-25: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-558-5198
Bolt Cutter

145585198
RB-0-AT: RNCC: 3 | RNVC: 2

10 Oct 2008

5110-17-701-4887
Hand Reamer

177014887
12-5H7DIN206SS: RNCC: 2 | RNVC: 1
586-12-5: RNCC: 3 | RNVC: 2
DIN206: RNCC: 4 | RNVC: 1

13 Nov 1972

5110-12-121-4099
Hand File

121214099
DIN7261-E400-1: RNCC: 2 | RNVC: 2
3152401: RNCC: 3 | RNVC: 2
1152W-400-1: RNCC: 5 | RNVC: 2
E400-1DIN7261: RNCC: 5 | RNVC: 2
1393713114071110: RNCC: 5 | RNVC: 9
0808396122290: RNCC: 5 | RNVC: 9
TGL 48-74111,400X36X12,1: RNCC: 5 | RNVC: 9
B450X1DIN8334: RNCC: 5 | RNVC: 9
DIN7261E400-1: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-173-2322
Hand File Set

121732322
1004: RNCC: 3 | RNVC: 2
8729: RNCC: 3 | RNVC: 2
2125/6P: RNCC: 3 | RNVC: 2
4010886677100: RNCC: 5 | RNVC: 2
6771080: RNCC: 5 | RNVC: 2
4000896012480: RNCC: 5 | RNVC: 2
101997: RNCC: 5 | RNVC: 9
330-1-2T: RNCC: 5 | RNVC: 9

29 Mar 1978

5110-22-610-1770
Hand File

226101770
1-230-06-2-2: RNCC: 3 | RNVC: 2

15 Apr 2005

5110-21-899-4883
Tube Seal

218994883
R29548-10: RNCC: 3 | RNVC: 2

4 Sep 1985

5110-98-107-7191
Hand Reamer

981077191
PARALLEL2X7-1/8X14-1/4IN.: RNCC: 3 | RNVC: 2

13 Feb 1984

5110-15-208-4699
Lima Di Precisione

152084699
3LPKC0CNMDN140: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-165-3840
Lima Per Meccanica

151653840
256234: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-163-4537
Is Oeks

151634537
2202160: RNCC: 3 | RNVC: 2

24 Sep 2002

5110-21-865-8938
Surform Plane Blade

218658938
297B: RNCC: 3 | RNVC: 2

19 May 1972

5110-98-107-7176
Hand Reamer

981077176
PARALLEL1-9/32X6X12IN.: RNCC: 3 | RNVC: 2

10 Feb 1984

5110-12-175-3635
Hand Wire Stripper

121753635
2530-40: RNCC: 3 | RNVC: 2
1317294: RNCC: 5 | RNVC: 2
131729: RNCC: 5 | RNVC: 9
2530 40GAE: RNCC: 5 | RNVC: 9
2530-0-5-0-6: RNCC: 5 | RNVC: 9

11 Sep 1978

5110-15-054-1396
Bucksaw Blade

150541396
56-5-650-550: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-99-717-1100
Peening Punch

997171100
T384360: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-99-910-4957
Hand File

999104957
DEF1098: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
1A1026: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-98-105-8684
Hand Reamer

981058684
NO PRIMARY REF 98-105-8684: RNCC: 3 | RNVC: 2
METRIC 2050-2.5: RNCC: 5 | RNVC: 2

18 May 1978

5110-14-252-6664
Pliers

142526664
40-1-120MM: RNCC: 3 | RNVC: 2
5275: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-15-218-1127
Serie Punte 1-13

152181127
ART29-1-13: RNCC: 3 | RNVC: 2

16 Nov 2005

Load More Results