What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 105 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 105of 112

5110-15-175-7109
Tronchese A Taglien

151757109
021/110: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-99-495-8287
Hand Saw

994958287
2-20-529: RNCC: 3 | RNVC: 2
MESH FS/462/12/01: RNCC: 6 | RNVC: 9

12 Apr 2006

5110-22-603-1261
Hand Metal Cutting Shears

226031261
TSM650: RNCC: 3 | RNVC: 2

5 Mar 2003

5110-33-156-6053
Hand Metal Cutting Shears

331566053
911.025: RNCC: 3 | RNVC: 2

23 Feb 1994

5110-27-011-7740
Hand Reamer

270117740
10111KR5033: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-27-011-5021
Hand File

270115021
10121ME0026: RNCC: 2 | RNVC: 1

20 Jan 2003

5110-21-639-4188
Hand File

216394188
39GP30: RNCC: 4 | RNVC: 1
MB06: RNCC: 5 | RNVC: 2
08354: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-21-639-4895
Hand File

216394895
39GP53: RNCC: 4 | RNVC: 1

2 Sep 1964

5110-21-809-1599
Hand File

218091599
MS15645-4: RNCC: 2 | RNVC: 2
39GP53: RNCC: 4 | RNVC: 1

29 Aug 1964

5110-27-007-3834
Hand File

270073834
A200-2: RNCC: 2 | RNVC: 1

20 Jun 2002

5110-14-471-0442
Electricians' Scissors

144710442
EROP 7: RNCC: 3 | RNVC: 2
ER0P7: RNCC: 5 | RNVC: 2

20 Jul 1994

5110-66-149-8295
Tinner's Hollow Cutting Punch

661498295
NO PRIMARY REF 66-149-8295: RNCC: 3 | RNVC: 2
07236107: RNCC: 5 | RNVC: 2

14 Apr 2003

5110-21-851-4401
Punch And Die Punch

218514401
XX: RNCC: 3 | RNVC: 1
300000141: RNCC: 3 | RNVC: 2

6 Oct 1968

5110-15-136-0186
Scalpello Per Elett

151360186
4994-400: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-21-849-9315
Scraping Knife

218499315
S4S: RNCC: 3 | RNVC: 2
5110-0855: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-17-115-0966
Draw Knife

171150966
0-10-170 EN 2-10-122: RNCC: 3 | RNVC: 2

9 Aug 2002

5110-17-015-5862
Hand File

170155862
TVA5110-2-263-005-1.1.42: RNCC: 3 | RNVC: 2
TVA5110-2-263-005: RNCC: 5 | RNVC: 1
12600802: RNCC: 5 | RNVC: 2

17 Jun 1972

5110-12-301-5274
Wood Scraper

123015274
NO PRIMARY REF 12-301-5274: RNCC: 3 | RNVC: 2
149-150X50X1,0: RNCC: 5 | RNVC: 9

20 Oct 1984

5110-15-215-3043
Barretta Acciaio Tr

152153043
F778/5-06: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-27-018-7899
Hand File

270187899
09013KE1019: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-12-126-1992

5110-37-517-8844
Bearing Scraper

375178844
KM9974021: RNCC: 3 | RNVC: 2

30 Jun 2009

5110-22-221-4436

5110-25-109-5312

5110-12-126-3082
Hand Reamer

121263082
NO PRIMARY REF 12-126-3082: RNCC: 3 | RNVC: 2
240: RNCC: 5 | RNVC: 9

30 May 1969

5110-37-510-1215
Mlg Switch Trip Too

375101215
85J1032-001: RNCC: 3 | RNVC: 2
85J1032-001: RNCC: 5 | RNVC: 2

29 Sep 2003

5110-14-206-4143
Hand Operated Wire Rope Cutter

142064143
NO PRIMARY REF14-206-4143: RNCC: 3 | RNVC: 2
612: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-15-184-7055
Raspa

151847055
3RFLT0ENMDN152-4: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-125-1138
Coltello Per Usi Va

151251138
5300-1: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-199-0978
Gimlet

151990978
1378-6: RNCC: 3 | RNVC: 2

12 Jan 2005

5110-66-158-2988
Reamer Adaptor

661582988
502AMR288-9: RNCC: 3 | RNVC: 2
502AMR288-9: RNCC: 5 | RNVC: 2

29 Oct 2009

5110-15-211-9796
Scalpello A Punta D

152119796
45114: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-233-0752
Taglierino (Cutter)

152330752
1-10-151: RNCC: 3 | RNVC: 2
511015E066167: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-185-0776
Taglierina Cm 160 A

151850776
TAGP160: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-126-2496
Bucksaw Blade

121262496
NO PRIMARY REF 12-126-2496: RNCC: 3 | RNVC: 2
B700DIN7245: RNCC: 5 | RNVC: 9
DIN7245-B700: RNCC: 5 | RNVC: 9
DIN7245B700: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-004-9289
Adattatore Per Rive

150049289
AT108A33/16: RNCC: 3 | RNVC: 2

9 Dec 2013

5110-21-639-5598

5110-21-639-6343

5110-21-639-5722

5110-12-320-6613
Bucksaw Blade

123206613
NO PRIMARY REF 12-320-6613: RNCC: 3 | RNVC: 2
48B-700 FESTE ANGEL: RNCC: 5 | RNVC: 9

5 Feb 1990

5110-25-101-3460

5110-22-303-9705

5110-12-126-1244
Hand File

121261244
NO PRIMARY REF 12-126-1244: RNCC: 3 | RNVC: 2
6500X450H2: RNCC: 5 | RNVC: 9
2000-450H2: RNCC: 5 | RNVC: 9
A450X2DIN8331: RNCC: 5 | RNVC: 9

30 May 1969

5110-98-107-5987
Hand File

981075987
100MM,FLAT,SECOND CUT: RNCC: 5 | RNVC: 9

3 Nov 1983

5110-99-120-0922

5110-25-100-8903
Hand Rasp

5110-25-100-8890
Sagsett

5110-14-534-8901
Ciseau Electrique

145348901
ESCA 1850 FA/13: RNCC: 3 | RNVC: 2
ESCA 1850: RNCC: 5 | RNVC: 1

14 Apr 2003

5110-98-200-9267
Reamer Blade Set

982009267
NO PRIMARY REF 98-200-9267: RNCC: 3 | RNVC: 2
ST 14: RNCC: 5 | RNVC: 2

20 Feb 1987

5110-99-702-5654
Hand Reamer

997025654
WWS66G/WD0110-90015: RNCC: 3 | RNVC: 2
WD01-10-90015WWS66G: RNCC: 5 | RNVC: 2
XP98PB01394: RNCC: 6 | RNVC: 9

23 Feb 1998

5110-15-233-0742
Scalpello

152330742
511015E032108: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-222-0598
Tagliacanalina Univ

152220598
16260: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-280-2040
Poincon De Macon

142802040
NO PRIMARY REF14-280-2040: RNCC: 3 | RNVC: 2
686-30: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-27-044-0865
Maket Bicak

270440865
J45-01: RNCC: 2 | RNVC: 1
J45-01: RNCC: 5 | RNVC: 9

6 Jan 2009

5110-99-537-7559
Cover Closure Tool

995377559
704485: RNCC: 3 | RNVC: 2
RM239: RNCC: 5 | RNVC: 2
BDD6373: RNCC: 5 | RNVC: 2
704485: RNCC: 5 | RNVC: 2
E001-801963: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-314-9896
Saege Fuehrung

123149896
NO PRIMARY REF 12-314-9896: RNCC: 3 | RNVC: 2
352-44: RNCC: 5 | RNVC: 9

6 Sep 1988

5110-99-763-4723
Cable Cropper

5110-12-198-4281
Nozzle Broach

121984281
652E-460: RNCC: 3 | RNVC: 2

26 Jan 1984

5110-15-202-7775
Adz

152027775
A.2768-P3: RNCC: 3 | RNVC: 2
(241)A7904A.2768-P3: RNCC: 5 | RNVC: 2

10 Jul 2007

5110-15-230-4317
Cesoia A Leva

152304317
2133-28: RNCC: 3 | RNVC: 2
511015E095497: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-98-203-4325
Knockout Punch And Die

982034325
010F: RNCC: 3 | RNVC: 2

14 Nov 1989

5110-21-111-5858
Tinner's Hollow Cutting Punch

211115858
39GP44: RNCC: 4 | RNVC: 1
REV A: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-15-165-3753
Estrattore Per Cont

151653753
M81969804: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-134-4422
Lama Per Legno Cm 4

151344422
40122: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-105-8066
Sci Raschietto

151058066
SC/155: RNCC: 3 | RNVC: 2

30 May 1989

5110-15-218-4740
Scalpello

152184740
5208-18: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-096-4186
Junior Hacksaw

990964186
NO PRIMARY REF 99-096-4186: RNCC: 3 | RNVC: 2
37-21027: RNCC: 5 | RNVC: 2

11 Dec 1995

5110-12-126-1369
Double Bow Cutting Punch

121261369
DIN7200-A24: RNCC: 2 | RNVC: 2
0100240: RNCC: 3 | RNVC: 2
240-24: RNCC: 3 | RNVC: 2
TS5110-0821: RNCC: 5 | RNVC: 1
00.09.09.36: RNCC: 5 | RNVC: 2
240115: RNCC: 5 | RNVC: 2
A24DIN7200: RNCC: 5 | RNVC: 2
TS5110-0821-24MM: RNCC: 5 | RNVC: 2
DIN7200A24: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-126-3368
Single Bit Ax

121263368
NO PRIMARY REF 12-126-3368: RNCC: 3 | RNVC: 2
D0-80DIN7294: RNCC: 5 | RNVC: 9

30 May 1969

5110-17-017-8573
Hand Metal Stamping Die Set

170178573
TE9WTM6: RNCC: 3 | RNVC: 1
120-3SLAGLETTERSAT0TZMETEN -: RNCC: 3 | RNVC: 1

8 Jan 1973

5110-66-086-8302
Hand Reamer

660868302
HANDREAMER: RNCC: 3 | RNVC: 1
652 3537: RNCC: 3 | RNVC: 2

20 May 1975

5110-12-126-1757
Hand Masonry Drill

121261757
NO PRIMARY REF 12-126-1757: RNCC: 3 | RNVC: 2
299-25-600: RNCC: 5 | RNVC: 9
620625: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-304-1765

5110-66-150-2256
Ladies' Scissors

661502256
NO PRIMARY REF 66-150-2256: RNCC: 3 | RNVC: 2
07620506: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-66-146-3888
Sabot Dimpler Tool

661463888
C31-G03-002-001: RNCC: 3 | RNVC: 2

5 May 2000

5110-17-113-8359
Knife And Knifestee

171138359
005-0912: RNCC: 3 | RNVC: 2

20 Feb 2001

5110-27-052-0499
Hand Metal Cutting Shears

270520499
6720270220: RNCC: 2 | RNVC: 9

15 Dec 2010

5110-15-208-4800
Alesatore Cilindric

152084800
3AAXFCFRDP2-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-052-2178
Hand Reamer

5110-17-118-2292
Back Pack Kit

171182292
DE-TBK (BACKPACK): RNCC: 3 | RNVC: 2

16 Jan 2006

5110-99-942-0178

5110-99-942-0103

5110-25-115-9956
Saw Handle

251159956
7409: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-15-165-3783
Cacciaspine

151653783
361661: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-343-9261
Hand Operated Cable Cutter

123439261
1225: RNCC: 3 | RNVC: 2
01225016000: RNCC: 5 | RNVC: 2

14 Aug 1997

5110-25-100-0898
Hand File

251000898
1SBF5110HVK2: RNCC: 2 | RNVC: 1
249136-2: RNCC: 6 | RNVC: 9
N6Q25805-6: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-15-230-3991
Punzoni Di Sicurezz

152303991
3689/3: RNCC: 3 | RNVC: 2
511015E061740: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-27-018-6082
Hand Reamer

270186082
3455-05136-00008: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-143-3989
Utensile Da Tornio

151433989
777/12-16: RNCC: 3 | RNVC: 2
777-12-16: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-15-004-9292
Adattatore Per Rive

150049292
AT108AR5/32: RNCC: 3 | RNVC: 2

9 Dec 2013

5110-99-942-0323
Hand Reamer

999420323
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-127-0951
Porta Lime

151270951
2627-1: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-209-8239
Tagliatubi In Plast

152098239
2423-1: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-17-701-5845
Fineer Zaag

177015845
300: RNCC: 3 | RNVC: 2

14 May 1970

5110-12-166-3046
Hand Reamer

121663046
1687902000: RNCC: 3 | RNVC: 2
KDEP2959: RNCC: 5 | RNVC: 9

23 Jul 1976

5110-22-604-1682
Metal Punch And Die

226041682
01 297: RNCC: 3 | RNVC: 2

26 Jun 2003

5110-99-721-3841
Spare Blade

997213841
70-091: RNCC: 3 | RNVC: 2
51-36: RNCC: 5 | RNVC: 2
15-391: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-12-121-8241
Hand Cape Chisel

121218241
DIN6451-250: RNCC: 2 | RNVC: 2
15875: RNCC: 3 | RNVC: 2
DIN6451A250: RNCC: 5 | RNVC: 9
DIN6451-A250: RNCC: 5 | RNVC: 9
A250DIN6451: RNCC: 5 | RNVC: 9
246250: RNCC: 5 | RNVC: 9

30 May 1969

5110-17-006-1844
Bow Saw Blade

170061844
1041-1200NSCMD8985: RNCC: 3 | RNVC: 2
1041-1200: RNCC: 5 | RNVC: 2

14 May 1970

5110-12-126-1254
Hand File

121261254
DIN7261-A300-4: RNCC: 2 | RNVC: 2
A300-4DIN7261: RNCC: 5 | RNVC: 2
B300X4DIN8331: RNCC: 5 | RNVC: 9
1112-300-4: RNCC: 5 | RNVC: 9
DIN7261A300-4: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-136-3996
Serie 6 Lime Piane

151363996
2608-6: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-172-9154
Trancia Catene Usag

151729154
TRANCIA CATENE USAG MOD.196 DA M: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-213-6380
Tagliatubi Per Tubi

152136380
2418-4/35: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-378-6734
Pocket Knife

123786734
P11: RNCC: 3 | RNVC: 2

30 Apr 2009

5110-14-244-0663

5110-66-013-5485
Hand File

660135485
905026: RNCC: 3 | RNVC: 2
HALFR0UND250MM: RNCC: 5 | RNVC: 2
SAND12101023: RNCC: 5 | RNVC: 2
07079607: RNCC: 5 | RNVC: 2
905026: RNCC: 5 | RNVC: 2
0707 9607: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-17-102-3462
Hand File

171023462
FM10: RNCC: 3 | RNVC: 2
FM10: RNCC: 5 | RNVC: 2

8 Jun 1988

5110-14-306-2022
Combination Plane

143062022
NO PRIMARY REF14-306-2022: RNCC: 3 | RNVC: 2
1643: RNCC: 5 | RNVC: 9

1 Jan 1974

5110-22-608-1144
Hand File

226081144
1-230-06-2-3: RNCC: 3 | RNVC: 2
SAND12300623: RNCC: 5 | RNVC: 2

9 Sep 2004

5110-25-102-9908
Hand File

251029908
14SBF5110HVK2: RNCC: 2 | RNVC: 1
FS 5110-0641 POS 8: RNCC: 2 | RNVC: 2
329DD: RNCC: 3 | RNVC: 2
249363-2: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-15-212-4578
Tronchese Brunita P

152124578
1190013: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-211-7951
Utensile Dritto X F

152117951
UTDR16X10X110: RNCC: 5 | RNVC: 3
UTDR16X10X110: RNCC: 5 | RNVC: 9

16 Nov 2005

5110-15-185-1050
Foretto

151851050
A-85042: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-21-105-2137
Punch And Die Punch

211052137
2: RNCC: 3 | RNVC: 1
300080313: RNCC: 3 | RNVC: 2
1F43: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-12-126-1519
Hand Reamer

121261519
NO PRIMARY REF 12-126-1519: RNCC: 3 | RNVC: 2
34-5DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-159-1257
Straight Trimmers Shears

151591257
PN UAS 00023737: RNCC: 3 | RNVC: 2
5120F76020865: RNCC: 5 | RNVC: 9

31 Mar 2004

5110-15-000-0340
Pliers

150000340
C0037: RNCC: 3 | RNVC: 2

22 Jan 2013

5110-25-106-4383
Hand File

251064383
10100888B0F0RSSTDU19-301: RNCC: 2 | RNVC: 1
10100888: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-15-184-7079
Accetta

151847079
3580-0600: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-13-102-8917
Hand Reamer

131028917
NBN485H8-15CS: RNCC: 2 | RNVC: 2

1 Apr 1975

5110-15-125-8639
Scalpello Per Legno

151258639
8252/8: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-824-0569
Pivot Pin Broach

998240569
NO PRIMARY REF 99-824-0569: RNCC: 3 | RNVC: 2
VR2135: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-19-001-0692
Hand Cold Chisel

190010692
352-16: RNCC: 3 | RNVC: 2

13 Aug 2004

5110-21-639-6293

5110-15-186-0897
Placchetta Fissaggi

151860897
9828: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-21-639-6015

5110-21-639-6228

5110-12-368-8271
End Cutting Nippers

123688271
66159115-TCS: RNCC: 3 | RNVC: 2

26 Apr 2006

5110-17-121-5613
Hand Metal Cutting Shears

171215613
P-6510-R: RNCC: 3 | RNVC: 2

5 Sep 2008

5110-66-149-5102
Knife Blade

661495102
NO PRIMARY REF 66-149-5102: RNCC: 3 | RNVC: 2
921-3: RNCC: 5 | RNVC: 2

4 Apr 2003

5110-22-222-6753
Hand File

222226753
111-6MGR: RNCC: 3 | RNVC: 2
OEBERG 111: RNCC: 5 | RNVC: 2
FIL: RNCC: 5 | RNVC: 9
72-1429-2: RNCC: 6 | RNVC: 9

13 Mar 1981

5110-14-443-9422
Diagonal Cutting Pliers

144439422
GS 170: RNCC: 3 | RNVC: 2

13 Dec 1990

5110-15-208-3775
Alesatore

152083775
3AAXFCFRDP5-4: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-639-3994
Broad Hatchet

216393994
3: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-14-202-1778
Pliers

142021778
288-20POPVC: RNCC: 3 | RNVC: 2
289BFPVC20: RNCC: 5 | RNVC: 2
888N20: RNCC: 5 | RNVC: 2
889CGS: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-99-120-7288
Hand Metal Cutting Shears

991207288
G69: RNCC: 3 | RNVC: 2
H20885: RNCC: 5 | RNVC: 2
NLC9011: RNCC: 5 | RNVC: 2
DL9A: RNCC: 6 | RNVC: 9
DL9A-H6009: RNCC: 6 | RNVC: 9
H6009: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-4968
Hand File

999104968
DEF1098: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
1A1158: RNCC: 6 | RNVC: 9
FA13617: RNCC: 6 | RNVC: 9
9104968: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-149-2323
Straight Trimmers Shears

661492323
NO PRIMARY REF 66-149-2323: RNCC: 3 | RNVC: 2
86536753: RNCC: 5 | RNVC: 2

24 Mar 2003

5110-21-807-1170
Embroidery Scissors

218071170
773 1-2: RNCC: 3 | RNVC: 2

23 Jul 1969

5110-15-136-3719
Alesatore Cilindric

151363719
H1466-6: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-125-1084
Scalpello Piatto Ti

151251084
35PM300: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-205-9827
Pipe Cutter

152059827
5NTP1-8A1P: RNCC: 3 | RNVC: 2
(241)A81705NTP1-8A1P: RNCC: 5 | RNVC: 2

27 Apr 2012

5110-99-120-0870
Scraping Knife

991200870
DL-9-A-H5632: RNCC: 2 | RNVC: 2
DL-9-A: RNCC: 5 | RNVC: 2
RC601: RNCC: 5 | RNVC: 2
H5632: RNCC: 6 | RNVC: 9
F1FA14949: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-234-3323

5110-15-053-9302
Alesatore

150539302
A12070: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-22-618-0671
Hand Cable Stripper

226180671
243-134: RNCC: 3 | RNVC: 2

10 Oct 2008

5110-66-149-9999
Spokeshave

661499999
NO PRIMARY REF 66-149-9999: RNCC: 3 | RNVC: 2
07460300: RNCC: 5 | RNVC: 2

11 Apr 2003

5110-66-150-2992
Firmer Chisel Set

661502992
NO PRIMARY REF 66-150-2992: RNCC: 3 | RNVC: 2
03813809: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-66-150-2251
Embroidery Scissors

661502251
NO PRIMARY REF 66-150-2251: RNCC: 3 | RNVC: 2
00088043: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-66-012-4452
Firmer Chisel

660124452
16-804: RNCC: 3 | RNVC: 2
737 1-4IN: RNCC: 3 | RNVC: 2
101: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-33-155-9801
Electricians' Scissors

331559801
845.121/1: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-14-201-1128
Single Bow Cutting Punch

142011128
153-9: RNCC: 3 | RNVC: 9
107-9: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-27-014-9027
Single Bow Cutting Punch

270149027
5120ATFD0434: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-15-134-2804
Scalpello Da Meccan

151342804
3603-2-2: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-98-205-5232
Hand File

982055232
DFAMPD00101 C: RNCC: 3 | RNVC: 2

30 Jan 2001

5110-15-230-4133
Lima Piatta

152304133
2560/2/5: RNCC: 3 | RNVC: 2
511015E078591: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-14-226-7430

5110-66-013-9862
Hand Reamer

660139862
650 4824: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-15-213-6246
Chisel Gauge - Risc

152136246
PPC1A: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-2668
Alesatore

152082668
3AANGERMCN9-5X10-5X45: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-213-6672
Kit Montaggio Inser

152136672
SRM0610S: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-388-0983
Turning Chisel

123880983
1851.13: RNCC: 3 | RNVC: 2

23 Feb 2012

5110-25-134-5963
Hand Wire Stripper

5110-12-126-1670

5110-15-211-7953
Utensile Piegato X

152117953
UTPG16X16X110: RNCC: 5 | RNVC: 3
UTPG16X16X110: RNCC: 5 | RNVC: 9

16 Nov 2005

5110-99-120-2180
Hand Reamer

991202180
BS3088: RNCC: 4 | RNVC: 1
H3: RNCC: 5 | RNVC: 2
DEFSTAN51-9: RNCC: 6 | RNVC: 9
16393: RNCC: 6 | RNVC: 9
1G253: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-132-5223
Sgorbia Manicata -

151325223
5235G1-4: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-66-013-5564
Hand File

660135564
916213: RNCC: 3 | RNVC: 2
THREESQUAREFILE: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-99-521-3707
Mitre Frame

995213707
783201: RNCC: 3 | RNVC: 2

2 Mar 1993

5110-15-137-9526
Tronchese A Taglio

151379526
1084014: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-66-013-5482
Hand File

660135482
HALFR0UND4IN: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-15-188-7558
Diagonal Cutting Pliers

151887558
536-414: RNCC: 3 | RNVC: 2
536-414: RNCC: 3 | RNVC: 2
(241)AA136536-414: RNCC: 5 | RNVC: 2

11 Nov 2009

5110-12-300-3722
Hand Reamer

123003722
HSS012011-000: RNCC: 3 | RNVC: 2

27 Jul 1984

5110-99-924-2671
Tinner's Hollow Cutting Punch

999242671
NO PRIMARY REF 99-924-2671: RNCC: 3 | RNVC: 2
01-2539: RNCC: 5 | RNVC: 2
0275-13205: RNCC: 6 | RNVC: 9
0275-924-2671: RNCC: 6 | RNVC: 9
FIG4499: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-221-3958
Portapunzoni Diam.

152213958
P0RTAPUNZ0NID21: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-493-0451
Ciseaux

144930451
00-725-200: RNCC: 3 | RNVC: 2
F300 0T 009 6904: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-12-140-0249
Hand Metal Stamping Die Set

121400249
DIN7353-SATZGROSZ-10: RNCC: 2 | RNVC: 2
36840: RNCC: 3 | RNVC: 2
331-10: RNCC: 3 | RNVC: 2
331010: RNCC: 5 | RNVC: 2
DIN7353-SATZGROSZ10: RNCC: 5 | RNVC: 9
DIN7353SATZGR0SZ10: RNCC: 5 | RNVC: 9
DIN7353SATZGROSZ10: RNCC: 5 | RNVC: 9
SATZGR0SZ10DIN7353: RNCC: 5 | RNVC: 9

30 May 1969

5110-27-017-8922
Hand File

270178922
60142001: RNCC: 2 | RNVC: 1
60142001: RNCC: 2 | RNVC: 1

3 Oct 2003

5110-15-191-9868
Rivetti

151919868
3-1300: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-113-5947
Calibro

151135947
C-C129952-1/3: RNCC: 3 | RNVC: 2

16 Jan 1992

5110-17-701-5613
Hand File

177015613
12601001 NICHOLSON: RNCC: 3 | RNVC: 2

15 May 1970

5110-15-136-2141
Serie Raspe

151362141
2647: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-218-0894
Mescolatore Mm120x6

152180894
513.00-MM120X600: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-25-103-5064

5110-22-221-4483

5110-15-219-9772
Seghetto Tascabile

152199772
1180/10: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-149-2320
Straight Trimmers Shears

661492320
NO PRIMARY REF 66-149-2320: RNCC: 3 | RNVC: 2
86536964: RNCC: 5 | RNVC: 2

24 Mar 2003

5110-98-102-0140
Hand File

981020140
HALF-ROUND SECOND CUT: RNCC: 3 | RNVC: 1
300MM HALF-RD 2ND CUT: RNCC: 3 | RNVC: 2
3603702: RNCC: 3 | RNVC: 2
4011019: RNCC: 3 | RNVC: 2
300MM HALF-RD 2ND CUT: RNCC: 5 | RNVC: 9
FA326L STUBS: RNCC: 6 | RNVC: 9

14 Dec 1978

5110-12-126-1904
Cutting Punch Insert

121261904
TL5110-0033-A7: RNCC: 2 | RNVC: 2
8180: RNCC: 3 | RNVC: 2
1180: RNCC: 5 | RNVC: 9
1012: RNCC: 5 | RNVC: 9

30 May 1969

5110-13-102-8916
Hand Reamer

131028916
NBN485H8-14-5CS: RNCC: 2 | RNVC: 2

1 Apr 1975

5110-12-126-1258
Hand File

121261258
NO PRIMARY REF 12-126-1258: RNCC: 3 | RNVC: 2
B150X0DIN8334: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-131-6999
Ha Fuehrungsbuchse

121316999
140.05.600: RNCC: 3 | RNVC: 2
200-45: RNCC: 5 | RNVC: 9
200-45V7-4-8: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-368-9877
Double Bow Cutting Punch

123689877
0100750: RNCC: 3 | RNVC: 2
00.09.60.87: RNCC: 5 | RNVC: 2

10 May 2006

5110-21-105-0214

5110-21-105-1305

5110-12-181-7749
Hand Reamer

121817749
000589185300: RNCC: 3 | RNVC: 9

14 Dec 1979

5110-66-010-1096
Hand File

660101096
921905: RNCC: 3 | RNVC: 2
670025: RNCC: 3 | RNVC: 2
0709 5209: RNCC: 5 | RNVC: 2
C0NTACTP0INTFILE: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-99-687-2193
Hand Reamer

996872193
EME70598-21: RNCC: 3 | RNVC: 2
TORNADO-9218: RNCC: 6 | RNVC: 9

20 Jan 2005

5110-98-854-8356

5110-99-719-3179

5110-66-150-1492
Hand Rasp

661501492
NO PRIMARY REF 66-150-1492: RNCC: 3 | RNVC: 2
07094200: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-12-126-1497
Hand Reamer

121261497
NO PRIMARY REF 12-126-1497: RNCC: 3 | RNVC: 2
6-4DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-616-8967
Pocket Knife

226168967
114-1160 R: RNCC: 3 | RNVC: 2

4 Apr 2008

5110-15-208-3780
Alesatore

152083780
3AAXFCFRDP6-1: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-176-4587
Lama Per Sega A Mac

151764587
9562GT20B: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-21-104-9821

5110-99-151-2570
Test Ring

991512570
MC1278062: RNCC: 3 | RNVC: 2

17 May 2002

5110-15-190-6024
Pistola Fissacavo

151906024
4164: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-12-371-5453
Hand Operated Cable Cutter

123715453
254326: RNCC: 3 | RNVC: 2

17 Apr 2007

5110-66-149-3477

5110-98-104-7457
Hand Half Round Nose Chisel

981047457
NO PRIMARY REF 98-104-7457: RNCC: 3 | RNVC: 2
229C: RNCC: 5 | RNVC: 2
1A910-4214: RNCC: 5 | RNVC: 2
5110-99-910-4214: RNCC: 6 | RNVC: 9

10 Dec 1973

5110-15-215-9609
Serie Cutter (3Pz.)

152159609
10-150/10-151/10-088: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-105-2281
Hand Reamer Set

211052281
L49-070-302LC003: RNCC: 3 | RNVC: 2
1621 DORMER SPECIAL: RNCC: 3 | RNVC: 2
S51-041: RNCC: 5 | RNVC: 2
311732: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-99-203-1833

5110-34-031-2127
Guided Post

340312127
TRAK 3 TON GS CARGO M/BENZ-2: RNCC: 3 | RNVC: 2
TRAK 3 TON GS CARGO M/BENZ-2: RNCC: 6 | RNVC: 9

24 Feb 2004

5110-21-809-3204

5110-21-804-7954

5110-15-137-9271
Attrezzo Bordatubi

151379271
0352010: RNCC: 3 | RNVC: 2
352 C: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-66-068-4515
Hand Cold Chisel

660684515
BS 3066: RNCC: 3 | RNVC: 1
27310: RNCC: 3 | RNVC: 2
3152-8: RNCC: 5 | RNVC: 9

2 Aug 1974

5110-27-018-7893
Hand File

270187893
09013KE1008: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-136-3105
Serie Punzoni

151363105
3683/1-6: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-98-854-7353

5110-15-136-2528
Sgorbia Per Scultor

151362528
6072-2-10: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-123-2612
Tronchese A Taglien

151232612
ART1185/1: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-270-3957

5110-14-270-4005

5110-14-262-8134
Tariere Torse A Vis

142628134
12-4-44: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-25-112-6662

5110-99-138-7273

5110-12-126-4891
Single Bit Ax Handle

121264891
DIN7295-A900: RNCC: 2 | RNVC: 2
A900DIN7295: RNCC: 5 | RNVC: 2
900DIN7295: RNCC: 5 | RNVC: 9
DIN7295A900: RNCC: 5 | RNVC: 9

30 May 1969

5110-17-701-4992
Shave Hook Scraper

177014992
NO PRIMARY REF 17-701-4992: RNCC: 3 | RNVC: 2
56-45-50: RNCC: 5 | RNVC: 9

31 Aug 1971

5110-99-721-6372
Cutting Tool

997216372
MSSPL2525-12: RNCC: 3 | RNVC: 2

6 Feb 1986

5110-21-637-5650
Reamer Blade Set

216375650
K: RNCC: 3 | RNVC: 2

25 May 1968

5110-27-010-6554
Hand File

270106554
99999-NIIN-DA0014117: RNCC: 2 | RNVC: 1

21 Jun 2002

5110-66-149-9503
Hand Reamer

661499503
NO PRIMARY REF 66-149-9503: RNCC: 3 | RNVC: 2
05868409: RNCC: 5 | RNVC: 2

11 Apr 2003

5110-99-614-5312
Drill

5110-12-126-2019
Nozzle Broach

121262019
1620-1-8: RNCC: 3 | RNVC: 2
162000-1,8: RNCC: 3 | RNVC: 2
235-1-8: RNCC: 5 | RNVC: 9
W446-1-8: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-364-9041
Hand Cable Stripper

123649041
53631022: RNCC: 3 | RNVC: 2
5-505: RNCC: 3 | RNVC: 2

13 Nov 2004

5110-21-105-2394

5110-27-045-2394
Hand File

270452394
J55-206H: RNCC: 2 | RNVC: 1

17 Apr 2009

5110-99-910-5660
Hollo Cutting Punch

999105660
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 5 | RNVC: 9
DL9A-H2023: RNCC: 5 | RNVC: 9
H2023: RNCC: 6 | RNVC: 9
F1FA16066: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-373-6241
Diagonal Cutting Pliers

143736241
NO PRIMARY REF14-373-6241: RNCC: 3 | RNVC: 2
192-16EL: RNCC: 5 | RNVC: 9

13 Nov 1981

5110-99-122-9370

5110-99-122-7945
Plane Cutter Bit

5110-15-219-9891
Lime Diamantate

152199891
D2696/10: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-203-3834
Electricians' Scissors

152033834
1172: RNCC: 3 | RNVC: 2
(241)AG6221172: RNCC: 5 | RNVC: 2
5120-15-E00-1172: RNCC: 5 | RNVC: 9

16 Jan 2008

5110-21-105-2142

5110-21-108-7690

5110-21-104-9600

5110-21-639-4350
Hand File

216394350
39GP30: RNCC: 4 | RNVC: 1
41F1553: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-22-606-1808
Breast Drill

226061808
C3463.0: RNCC: 3 | RNVC: 2

20 Jan 2004

5110-22-221-3600
Hand File

222213600
111MGR/6: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-21-639-4158
Hand File

216394158
39GP30: RNCC: 4 | RNVC: 1

1 Feb 1965

5110-22-274-3749

5110-12-130-9630
Ven Schneideinsatz

121309630
21861220: RNCC: 3 | RNVC: 2
900-10VD3C3-30: RNCC: 5 | RNVC: 9

30 May 1969

5110-98-853-6243
Inlet Valve Cutter

988536243
NO PRIMARY REF 98-853-6243: RNCC: 3 | RNVC: 2
T32608S15: RNCC: 5 | RNVC: 2

4 Dec 1978

5110-21-802-2813

5110-99-721-6378

5110-14-398-5699
End Cutting Nippers

143985699
5167-12: RNCC: 3 | RNVC: 2

31 Jan 1985

5110-99-910-4991
Hand File

999104991
C00RDPATH4019: RNCC: 3 | RNVC: 2
1A896: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PT6: RNCC: 6 | RNVC: 9
DEFSTAN51-11PT6: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-230-4260
Tronchese Isolata L

152304260
1799/5: RNCC: 3 | RNVC: 2
511015E095422: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-33-155-9803
Electricians' Scissors

331559803
847.124/1: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-15-136-0836
Tronchese Con Tagli

151360836
1798-11: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-12-137-3276
Freisenker Fraeser

121373276
2805 9291: RNCC: 3 | RNVC: 2
W38464/16: RNCC: 5 | RNVC: 2
0994 8414: RNCC: 5 | RNVC: 9
09948414: RNCC: 5 | RNVC: 9
W38464-16: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-176-7993
Lima Con Manico Da

151767993
2601/3: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-176-0455
Punteruolo Con Punt

151760455
1716R-195: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-14-530-2802
Hand Operated Cable Cutter

145302802
996.16: RNCC: 3 | RNVC: 2
99616: RNCC: 5 | RNVC: 2
3148512195306: RNCC: 5 | RNVC: 2

27 May 2002

5110-12-122-2516
Hand Reamer

121222516
513A203HSS11-32: RNCC: 3 | RNVC: 2

30 May 1969

5110-19-001-4932
Hand Wire Stripper

190014932
379-00: RNCC: 3 | RNVC: 2

25 Apr 2006

5110-66-025-5715
File Handle

660255715
NO PRIMARY REF 66-025-5715: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-21-849-9352
Two Man Crosscut Saw

218499352
22: RNCC: 3 | RNVC: 1
5110-1036: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-25-100-4178
Smooth Plane

251004178
NO PRIMARY REF25-100-4178: RNCC: 3 | RNVC: 2
41-5888-100-060: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-99-910-5569
Tinner's Hollow Cutting Punch

999105569
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A-H1898: RNCC: 6 | RNVC: 9
H1898: RNCC: 6 | RNVC: 9
1K165: RNCC: 6 | RNVC: 9
FA15982: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-121-6954
Hand Metal Cutting Shears

121216954
DIN6438-250: RNCC: 2 | RNVC: 2
284-250: RNCC: 3 | RNVC: 2
101-250: RNCC: 3 | RNVC: 9
250DIN6438: RNCC: 5 | RNVC: 2
284-2: RNCC: 5 | RNVC: 9
5730012-250RECHTS: RNCC: 5 | RNVC: 9
5730014-250RECHTS: RNCC: 5 | RNVC: 9
1393261111731545: RNCC: 5 | RNVC: 9
0808393874569: RNCC: 5 | RNVC: 9
5730017-250: RNCC: 5 | RNVC: 9

30 May 1969

5110-98-203-8036

5110-15-199-0754
Double Bow Cutting Punch

151990754
3703-20: RNCC: 3 | RNVC: 2
C3703-20: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-398-6336
Hand Operated Cable Cutter

143986336
324-23G: RNCC: 3 | RNVC: 2
3272670268005: RNCC: 5 | RNVC: 2

31 Jan 1985

5110-99-805-4907
Steering Knu Broach

998054907
NO PRIMARY REF 99-805-4907: RNCC: 3 | RNVC: 2
D1032: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-66-150-6022
Cutters Hose

661506022
NO PRIMARY REF 66-150-6022: RNCC: 3 | RNVC: 2
01014244: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-12-307-2034
Hand Cape Chisel

123072034
NO PRIMARY REF 12-307-2034: RNCC: 3 | RNVC: 2
3649-200: RNCC: 5 | RNVC: 9

21 May 1986

5110-99-198-2900

5110-15-172-7117
Spazzolino Kleen Bo

151727117
SPAZZOLINO KLEEN BORE MOD.UT-221: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-14-363-9552
Outil De Rectificat

143639552
16380481: RNCC: 3 | RNVC: 2
16380481: RNCC: 5 | RNVC: 9

7 Aug 1980

5110-98-102-0135

5110-27-018-7895
Hand File

270187895
09013KE1010: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-66-010-8516
Poppet Valve Reamer

5110-22-221-4459

5110-22-221-4456

5110-12-338-6388
Pipe Cutter Cutting Wheel

123386388
4485NR: RNCC: 3 | RNVC: 2
1080846: RNCC: 5 | RNVC: 2

8 Aug 1995

5110-21-853-7940
Double Bow Cutting Punch

218537940
27: RNCC: 3 | RNVC: 1
149: RNCC: 5 | RNVC: 1

23 Jul 1969

5110-21-806-4018

5110-14-366-7145

5110-12-170-3871
Compass Saw

121703871
5936-370: RNCC: 3 | RNVC: 9

8 Jul 1977

5110-17-112-1238
Tinner's Hollow Cutting Punch

171121238
P98769YNSCM90299: RNCC: 3 | RNVC: 2
P98769Y: RNCC: 5 | RNVC: 2
5130-01-304-7281: RNCC: 6 | RNVC: 9

1 Oct 1998

5110-66-143-8701
Hand Cable Stripper

661438701
80-6104-4314-7: RNCC: 3 | RNVC: 2
TMT5002: RNCC: 3 | RNVC: 2

1 Sep 1997

5110-21-849-8242
Hand File

218498242
39GP53: RNCC: 4 | RNVC: 1
5110-0695: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-15-068-3970
Handle File Wood

150683970
2625/100: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-15-210-2041
Chiave Di Registro

152102041
ART-9609-B: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-176-3058
Lama Per Sega Ad Ar

151763058
5553-2-2915: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-215-3046
Barretta Acciaio Tr

152153046
F778/7-08: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-910-9979
Hand Reamer

999109979
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16246: RNCC: 6 | RNVC: 9
10138: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-22-221-4710
Hand Metal Stamping Die Set

222214710
657-5: RNCC: 3 | RNVC: 2
5703400123012: RNCC: 5 | RNVC: 2

31 Jul 1973

5110-99-120-4679
Bolt Cutter Jaws

991204679
602ACC: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-21-890-3688
File Handle

218903688
921473: RNCC: 3 | RNVC: 2

21 Jan 1983

5110-21-807-1239
Hand Reamer

218071239
CRITCHLEYANGLEBLADE: RNCC: 3 | RNVC: 1
31: RNCC: 3 | RNVC: 2
1F108570: RNCC: 5 | RNVC: 9

5 Feb 1964

5110-15-213-7163
Lima Rortonda Snap-

152137163
HB4R: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-17-700-9783
Firmer Chisel

177009783
BERG1031-956: RNCC: 3 | RNVC: 2
1111-32: RNCC: 3 | RNVC: 2

14 May 1970

5110-17-045-2989
Diagonal Cutting Pliers

170452989
2118-6: RNCC: 3 | RNVC: 2
71211860: RNCC: 3 | RNVC: 2
E70-150: RNCC: 5 | RNVC: 2
2118-6: RNCC: 6 | RNVC: 9

2 Dec 1974

5110-27-045-1036
Hand Cape Chisel

270451036
L50-08: RNCC: 2 | RNVC: 1

7 Apr 2009

5110-12-121-5424
Jack Plane

121215424
DIN7310-33A: RNCC: 2 | RNVC: 2
106S/33: RNCC: 3 | RNVC: 2
EMM106S/33: RNCC: 5 | RNVC: 2
33ADIN7310: RNCC: 5 | RNVC: 2
HW5: RNCC: 5 | RNVC: 9
HW5-33: RNCC: 5 | RNVC: 9
652A105: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-155-8794
Hand File

121558794
NO PRIMARY REF 12-155-8794: RNCC: 3 | RNVC: 2
4530055: RNCC: 5 | RNVC: 9
1072D: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-013-7572
Hand Reamer

660137572
650 4600: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-99-759-2933
Trimming Knife

997592933
199C: RNCC: 3 | RNVC: 2
1620: RNCC: 5 | RNVC: 2
199: RNCC: 5 | RNVC: 2
30ZS822650000012: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-27-027-1626
Diagonal Cutting Pliers

270271626
04022504773: RNCC: 2 | RNVC: 1
GX-01-03-005-01: RNCC: 2 | RNVC: 1

12 Sep 2005

5110-12-122-2556
Hand Reamer

121222556
DIN204-B3: RNCC: 2 | RNVC: 2
445-3: RNCC: 3 | RNVC: 2
11682030: RNCC: 3 | RNVC: 2
024012-3: RNCC: 3 | RNVC: 2
513E201HSSFERTIG3SPIRALGENUTET: RNCC: 5 | RNVC: 9
D3DIN204: RNCC: 5 | RNVC: 9
DIN204-D3: RNCC: 5 | RNVC: 9
DIN204D3: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-126-1377
Double Bow Cutting Punch

121261377
DIN7200-A11: RNCC: 2 | RNVC: 2
0100110: RNCC: 3 | RNVC: 2
240-11: RNCC: 3 | RNVC: 2
TS5110-0821: RNCC: 5 | RNVC: 1
240050: RNCC: 5 | RNVC: 2
00.08.96.23: RNCC: 5 | RNVC: 2
A11DIN7200: RNCC: 5 | RNVC: 2
TS5110-0821-11MM: RNCC: 5 | RNVC: 2
DIN7200A11: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-300-8661
Hand Metal Cutting Shears

123008661
316-280 RECHTS: RNCC: 3 | RNVC: 9
316-280: RNCC: 5 | RNVC: 9

5 Sep 1984

5110-17-032-1040
Hand Reamer

170321040
BS122-2-1964TAB5 5-16IN800HV: RNCC: 2 | RNVC: 2
ISO 236/1: RNCC: 4 | RNVC: 1
BS122: RNCC: 4 | RNVC: 1

17 Jun 1972

5110-99-910-5801
Bucksaw Blade

999105801
DEFSTAN51-11 PART 17: RNCC: 4 | RNVC: 1
UKD1S2108A: RNCC: 5 | RNVC: 2
DL9A-H2209: RNCC: 6 | RNVC: 9
H2209: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-392-8075
A Met Cisaille Lame

143928075
887A.L1: RNCC: 3 | RNVC: 2
0714 03 06: RNCC: 5 | RNVC: 2
3148512116400: RNCC: 5 | RNVC: 2
887AL1: RNCC: 5 | RNVC: 2
0211640: RNCC: 5 | RNVC: 9
887L1: RNCC: 5 | RNVC: 9
MO050201: RNCC: 6 | RNVC: 9

7 Apr 1984

5110-15-191-5036
Scalpello A Taglio

151915036
7340005: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-165-3828
Lima Per Meccanica

151653828
256618: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-144-5133
Pialla In Legno Con

151445133
5122G: RNCC: 3 | RNVC: 2
5831-60: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-15-230-5400
Lima Mezzatonda

152305400
511015E064492: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-27-019-2842
Hand File

270192842
10131ME1026: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-12-121-5402
Plane Cutter Bit

121215402
DIN5146-A33: RNCC: 2 | RNVC: 2
A33DIN5146: RNCC: 5 | RNVC: 2
DIN5146A33: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-269-1004
Valve Seat Grinder

222691004
62071-15H-2567: RNCC: 3 | RNVC: 2
62071-15H-2567: RNCC: 5 | RNVC: 2

7 Jun 1996

5110-27-045-2407
Hand File

270452407
J55-306H: RNCC: 2 | RNVC: 1

17 Apr 2009

5110-12-305-8292
Knockout Punch And Die

123058292
74331101: RNCC: 3 | RNVC: 9

19 Dec 1985

5110-21-868-0140
Hand Cold Chisel Set

218680140
95CR: RNCC: 3 | RNVC: 2

14 Jul 1972

5110-21-637-5959
Hand Reamer

216375959
B94-2: RNCC: 3 | RNVC: 1
B174-2: RNCC: 3 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1

6 Jun 1968

5110-25-101-4029
Piggtraad Saks

251014029
51: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-21-874-4723
Jig

218744723
KTD11: RNCC: 3 | RNVC: 2
5110-1259: RNCC: 6 | RNVC: 9

22 Feb 1977

5110-15-136-3700
Sega A Nastro Per M

151363700
2818-18: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-12-300-8647
Hand File

123008647
2113101: RNCC: 3 | RNVC: 2
2113-100-1: RNCC: 5 | RNVC: 2

5 Sep 1984

5110-27-019-9406
Single Bow Cutting Punch

270199406
360-15 MM: RNCC: 2 | RNVC: 1
11001DZ0054: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-123-6544
Cesoia Per Funi E C

151236544
1895/2: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-33-207-7552
Pliers

332077552
8223.02000: RNCC: 3 | RNVC: 2
626.181: RNCC: 3 | RNVC: 2
8.380: RNCC: 3 | RNVC: 2

2 Oct 2009

5110-15-054-1543
Single Bow Cutting Punch

150541543
8-041-608: RNCC: 3 | RNVC: 2
8-041-608: RNCC: 5 | RNVC: 9
8-041-608: RNCC: 5 | RNVC: 9

1 Jan 1974

5110-15-185-5673
Tondino Per Motoseg

151855673
MAN4-6: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-126-4898
Rip Hand Saw

121264898
513-600: RNCC: 3 | RNVC: 2
E102-600: RNCC: 3 | RNVC: 2
1246001: RNCC: 5 | RNVC: 2
654C602-600: RNCC: 5 | RNVC: 9
600DIN7244: RNCC: 5 | RNVC: 9
DIN7244-600: RNCC: 5 | RNVC: 9

30 May 1969

5110-33-207-4864
Ratchet Drill

332074864
1206-1: RNCC: 3 | RNVC: 2

27 Apr 2009

5110-14-430-1089
Tube Cutter Cutting Wheel

144301089
238A.M5: RNCC: 3 | RNVC: 2
238A-M5: RNCC: 5 | RNVC: 2
238AM5: RNCC: 5 | RNVC: 2
3148511552209: RNCC: 5 | RNVC: 2
0155220: RNCC: 5 | RNVC: 9

1 Mar 1989

5110-27-027-0929
Bootmaker Knife

270270929
SAYA TRAS BICAGI: RNCC: 2 | RNVC: 1

1 Sep 2005

5110-14-481-5744
Hand Cable Stripper

144815744
163: RNCC: 3 | RNVC: 2
3148511392553: RNCC: 5 | RNVC: 2
0139255: RNCC: 5 | RNVC: 9

16 May 1996

5110-14-315-2826

5110-25-101-9350
Single Bow Cutting Punch

251019350
25MMDIA: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-14-573-8689
Bolt Cutter

145738689
990.B2: RNCC: 3 | RNVC: 2

16 Nov 2012

5110-12-121-3683
Hand Masonry Drill

121213683
NO PRIMARY REF 12-121-3683: RNCC: 3 | RNVC: 2
299-15-300: RNCC: 5 | RNVC: 9
620315: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-310-3413
Nozzle Broach

123103413
734-0010: RNCC: 3 | RNVC: 2
734-0010: RNCC: 5 | RNVC: 9

12 May 1987

5110-27-010-6647
Hand File

270106647
99999-NIIN-DA0037093: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-99-975-2296

5110-22-611-8856
Knockout Punch And Die

226118856
4.504.011.270: RNCC: 3 | RNVC: 2

28 Oct 2005

5110-12-368-0286
Craftsman's Knife

123680286
282002: RNCC: 3 | RNVC: 2

22 Nov 2005

5110-15-221-4909
Scalpello

152214909
EX5110RI7422256: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-183-3930
Morsetto Lama

151833930
00300559: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-120-6186
Jack Plane

121206186
DIN7310-33C: RNCC: 2 | RNVC: 2
33CDIN7310: RNCC: 5 | RNVC: 2
HW5D: RNCC: 5 | RNVC: 9
HW5D-33: RNCC: 5 | RNVC: 9
652A106: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-173-2320
Hand Cold Chisel

121732320
3640-100: RNCC: 3 | RNVC: 2
107451: RNCC: 5 | RNVC: 2

29 Mar 1978

5110-14-201-1777
Draw Knife

142011777
319-25: RNCC: 3 | RNVC: 9

1 Jan 1962

5110-12-126-1938
Craftsman's Knife

121261938
NO PRIMARY REF 12-126-1938: RNCC: 3 | RNVC: 2
DIN6476-GROSZ: RNCC: 5 | RNVC: 9
DIN6476GR0SZ: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-350-4195
Wax Scraper

993504195
DC/CPS/6305 TABLE 4 ITEM 40: RNCC: 2 | RNVC: 2

15 Jan 2008

5110-17-015-5866
Hand File

170155866
TVA5110-2-263-005-1.1.7: RNCC: 3 | RNVC: 2
TVA5110-2-263-005: RNCC: 5 | RNVC: 1
12101002: RNCC: 5 | RNVC: 2

17 Jun 1972

5110-99-377-5649
Diagonal Cutting Pliers

993775649
KEN-558-3320K: RNCC: 3 | RNVC: 2
CV153085: RNCC: 5 | RNVC: 2
KEN-558-3320K: RNCC: 5 | RNVC: 2

30 Jun 2010

5110-15-216-0142
Bucing Bars

152160142
619AT: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-120-0886
Bolt Cutter Blade

5110-99-466-8563

5110-99-120-0911

5110-99-618-7389

5110-22-610-1530
Circle Cutter

226101530
4.328.903.910: RNCC: 3 | RNVC: 2

13 Apr 2005

5110-12-389-4394
Tailor's Shears

123894394
769550-A: RNCC: 3 | RNVC: 2

6 Jul 2012

5110-15-155-6115
Special Sfila Fermi

151556115
(241)A5682SFILAF.5: RNCC: 3 | RNVC: 2
SFILA F.5: RNCC: 3 | RNVC: 2

30 Apr 2002

5110-15-214-5472
Lama X Sega A Nastr

152145472
LAMA2825X27X0,9MM.10DENTI: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-165-3985
Mecchia X Trapano E

151653985
4509G38: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-25-116-0924
Single Bit Ax

251160924
233H: RNCC: 3 | RNVC: 2
214 1830: RNCC: 5 | RNVC: 2
214-1830: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-99-910-5315
Plane Cutter Bit

999105315
H1710: RNCC: 3 | RNVC: 2
F1FA15571: RNCC: 6 | RNVC: 9
1B1736: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-4990
Tension File Link

999104990
H5069: RNCC: 2 | RNVC: 2
HS2: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-17-113-6262
Craftsman's Knife

171136262
1320060: RNCC: 3 | RNVC: 2

1 Nov 2000

5110-21-876-0163
Hand Metal Stamping Die

218760163
1585: RNCC: 3 | RNVC: 1
1567Y121: RNCC: 3 | RNVC: 2

19 Apr 1977

5110-99-567-1943
Hand Reamer

995671943
B100: RNCC: 3 | RNVC: 1
BS328 PART 4: RNCC: 3 | RNVC: 1
B100 5/64IN.: RNCC: 5 | RNVC: 2

17 Mar 1999

5110-21-888-3986
Wood Scraper

218883986
W-10: RNCC: 3 | RNVC: 2
H100: RNCC: 3 | RNVC: 2
W10: RNCC: 5 | RNVC: 2

21 Mar 1982

5110-33-202-8994
Hand Operated Cable Cutter

332028994
AED-C-2002-01-028: RNCC: 3 | RNVC: 2

26 Nov 2003

5110-15-205-5225
Calibro A Corsoio

152055225
410200-150: RNCC: 3 | RNVC: 2
(241)AK761410200-150: RNCC: 5 | RNVC: 2

16 Mar 2012

5110-98-104-7450
Hand Cape Chisel

981047450
NO PRIMARY REF 98-104-7450: RNCC: 3 | RNVC: 2
1A 910-4181: RNCC: 5 | RNVC: 2
5110-99-910-4181: RNCC: 6 | RNVC: 9

10 Dec 1973

5110-66-012-2187
Firmer Chisel

660122187
1031-956-1-8IN: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-15-216-2825
Fermariga Per Murat

152162825
59570-20/2: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-173-2317
Hand Operated Cable Cutter

121732317
TL5110-0039-001: RNCC: 2 | RNVC: 2
2801N: RNCC: 3 | RNVC: 2
131835: RNCC: 5 | RNVC: 2

29 Mar 1978

5110-21-105-1168
Hand File

211051168
903434: RNCC: 3 | RNVC: 2
39GP30: RNCC: 4 | RNVC: 1
5110-0380: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-14-491-0259
Alesoir

144910259
4602 025 800 006: RNCC: 3 | RNVC: 2
F300 0T 001 1060: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-15-136-1151
Serie Punzoni

151361151
3618: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-136-3716
Alesatore Cilindric

151363716
H1466-3-5: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-165-3969
Coltello Multiuso C

151653969
220001: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-21-849-9080
Hand File

218499080
39GP30: RNCC: 4 | RNVC: 1
5110-0343: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-14-559-7480
Hand File

145597480
90-103: RNCC: 3 | RNVC: 2
694 510 442 006: RNCC: 6 | RNVC: 9

12 Feb 2009

5110-12-126-1206
Broad Hatchet

121261206
NO PRIMARY REF 12-126-1206: RNCC: 3 | RNVC: 2
A1-000DIN6466: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-208-4599
Alesatori Conici Mm

152084599
3AAWFPCNDN2-4X3-46: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-328-9904
Double Bow Cutting Punch

123289904
DIN7200-A65: RNCC: 2 | RNVC: 2
0100650: RNCC: 3 | RNVC: 2
00.09.50.77: RNCC: 5 | RNVC: 2

7 Jul 1992

5110-27-010-6589
Hand File

270106589
99999-NIIN-DA0037138: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-27-014-5885
Hand File

270145885
NF1602: RNCC: 2 | RNVC: 1
NF-1602: RNCC: 2 | RNVC: 1
NF1602: RNCC: 2 | RNVC: 1

11 Nov 2002

5110-14-204-8012
Tube Cutter

142048012
NO PRIMARY REF14-204-8012: RNCC: 3 | RNVC: 2
322: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-99-442-6321
Hand Reamer

994426321
WWS66J/WD0110-90015: RNCC: 3 | RNVC: 2
WD01-10-90015WWS66J: RNCC: 5 | RNVC: 2
XP98PB01396: RNCC: 6 | RNVC: 9

23 Feb 1998

5110-15-172-7966
Tagliapiastrelle Mo

151727966
TAGLIAPIASTRELLE MONTOLIT TIPO M: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-208-7785
Alesatore

152087785
3AAWFCFRDP9-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-16-001-7097
File Handle

160017097
PD-U: RNCC: 3 | RNVC: 2

13 Mar 2002

5110-22-302-8760

5110-22-301-3130

5110-15-138-0808
Cesoia Per Lamiera

151380808
206102: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-210-5642
Pinzetta Spelafili

152105642
539895: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-304-2916

5110-27-010-6541
Hand File

270106541
99999-NIIN-DA0037231: RNCC: 2 | RNVC: 1

20 Jun 2002

5110-66-150-2170
Hand Saw Swage

661502170
NO PRIMARY REF 66-150-2170: RNCC: 3 | RNVC: 2
07252301: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-21-899-4880
Tube Seal

218994880
R29548-04: RNCC: 3 | RNVC: 2

4 Sep 1985

5110-17-101-8150
Doweling Jig

171018150
752236703000: RNCC: 3 | RNVC: 2

11 Nov 1987

5110-21-851-4410
Hand Metal Cutting Punch And Die

218514410
XX: RNCC: 3 | RNVC: 1

6 Oct 1968

5110-15-165-3810
Lima Per Meccanica

151653810
256135: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-244-0836

5110-12-177-7520

5110-15-104-3891
Hand Metal Cutting Shears

151043891
60113597: RNCC: 3 | RNVC: 2

30 May 1989

5110-15-190-0724
Electricians' Scissors

151900724
16014: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-12-364-4536
Rectangular Cutting Punch

123644536
0430100: RNCC: 3 | RNVC: 2

28 Sep 2004

5110-12-133-6090
Gimlet

121336090
DIN6464-9X155: RNCC: 2 | RNVC: 2
9X155DIN6464: RNCC: 5 | RNVC: 2

30 May 1969

5110-21-105-2047
Single Bow Cutting Punch

211052047
147: RNCC: 3 | RNVC: 1
B745: RNCC: 3 | RNVC: 2
5110-0965: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-27-010-7445
Hand Reamer

270107445
99999-NIIN-DA0036183: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-12-347-0454
Bolt Cutter

123470454
672-450: RNCC: 3 | RNVC: 2
177 18: RNCC: 3 | RNVC: 2
05270001: RNCC: 3 | RNVC: 2
00.19.26.83: RNCC: 5 | RNVC: 2
4003315061359: RNCC: 5 | RNVC: 2
6438820: RNCC: 5 | RNVC: 2

15 Oct 1998

5110-21-852-9233
Hand File

218529233
914106: RNCC: 3 | RNVC: 2
JANF1088: RNCC: 4 | RNVC: 1
39-GP-30: RNCC: 4 | RNVC: 1
39GP30: RNCC: 4 | RNVC: 1
5110-0537: RNCC: 5 | RNVC: 9

19 Sep 1969

5110-12-127-7398
Single Bow Cutting Punch

121277398
DIN7200-B30: RNCC: 2 | RNVC: 2
B30DIN7200: RNCC: 5 | RNVC: 2
DIN7200B30: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-173-8317
Tinner's Hollow Cutting Punch

121738317
632A203-14: RNCC: 3 | RNVC: 9

16 May 1978

5110-25-133-0859
Filsett Mappe

251330859
FOR FILSETT 5110-25-103-9563: RNCC: 5 | RNVC: 2

4 Feb 1985

5110-12-130-2266
Hatchet Handle

121302266
ERFA7229-400: RNCC: 3 | RNVC: 2
2445F400: RNCC: 5 | RNVC: 2

30 May 1969

5110-27-011-6658
Hand File

270116658
09013YE1254: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-66-016-8054
Insert Remover Tool

660168054
1360: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-27-014-8944
Hand Reamer

270148944
3455ATF16449: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-98-103-3613

5110-98-855-8141

5110-33-156-4493
Diagonal Cutting Pliers

331564493
4701.026: RNCC: 3 | RNVC: 2
62516: RNCC: 3 | RNVC: 2
005.360: RNCC: 3 | RNVC: 2

18 Mar 1994

5110-15-165-3805
Lima Per Meccanica

151653805
256115: RNCC: 3 | RNVC: 2

1 Nov 2002

Load More Results