What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 104 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 104of 112

5110-99-721-6386
Cutting Tool

997216386
TPMR090204-538TIC/TIN: RNCC: 3 | RNVC: 2

12 Feb 1986

5110-13-119-5682
Firmer Chisel

131195682
425-15: RNCC: 3 | RNVC: 2
00.07.41.62: RNCC: 5 | RNVC: 2
7311518017767: RNCC: 5 | RNVC: 2

16 Nov 2006

5110-66-023-0084
Rip Hand Saw

660230084
819126: RNCC: 3 | RNVC: 2
15-119: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-98-107-5972
Hand File

981075972
200MM,REGULAR,KNIFE EDGE: RNCC: 5 | RNVC: 9

4 Nov 1983

5110-15-132-6967
Alesatore In Acciai

151326967
H1466G12-5: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-136-2731
Assortimento Di 6 L

151362731
2640-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-208-4546
Alesatore

152084546
3AARPERMDQ12: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-165-4175
Cutter Lama 18Mm

151654175
2782293: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-208-8310
Tronchese

152088310
3TASFZCNLSIV5000110: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-564-5134
Single Bit Ax

145645134
A251400100001: RNCC: 3 | RNVC: 2

4 May 2010

5110-21-840-0091

5110-15-165-4273
Scalpello In Acciai

151654273
361023: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-27-011-3985
Hand File

270113985
99999-NIIN-DA0014174: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-99-138-1328
Paring Chisel

991381328
DEF STAN 51-11:PART 27-H7038: RNCC: 2 | RNVC: 2
H7038: RNCC: 3 | RNVC: 2
DEF STAN 51-11:PART 27: RNCC: 5 | RNVC: 2
75547: RNCC: 5 | RNVC: 2
H7038: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-98-107-7152
Hand Reamer

981077152
PARALLEL49/64X4X8IN.: RNCC: 3 | RNVC: 2

9 Feb 1984

5110-66-149-7517
Hand File

661497517
NO PRIMARY REF 66-149-7517: RNCC: 3 | RNVC: 2
07076901: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-25-100-4144
Hand Masonry Drill

251004144
NO PRIMARY REF25-100-4144: RNCC: 3 | RNVC: 2
41-3064-270-100: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-21-108-7686

5110-15-215-4031
Chiave Inglese

152154031
516N0030: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-526-3057
Exposed Blade Tube Deburring Tool

145263057
D9850M1408: RNCC: 3 | RNVC: 2

18 Jul 2001

5110-27-014-8940
Hand Reamer

270148940
3455ATF16441: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-21-819-4532

5110-12-131-7055
Drehwerkzeug Pilot

121317055
216.71.112: RNCC: 3 | RNVC: 2
216.71.522: RNCC: 5 | RNVC: 2
200-21: RNCC: 5 | RNVC: 9
200-21VD1-6-9-7-2: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-149-8292
Tinner's Hollow Cutting Punch

661498292
NO PRIMARY REF 66-149-8292: RNCC: 3 | RNVC: 2
07235603: RNCC: 5 | RNVC: 2

14 Apr 2003

5110-12-192-4520
Diagonal Cutting Pliers

121924520
NO PRIMARY REF 12-192-4520: RNCC: 3 | RNVC: 2
E184: RNCC: 5 | RNVC: 2
2646EN: RNCC: 5 | RNVC: 9

26 Apr 1982

5110-12-174-6326
Hand Drill

121746326
NO PRIMARY REF 12-174-6326: RNCC: 3 | RNVC: 2
10005: RNCC: 5 | RNVC: 9

17 Jul 1978

5110-14-407-8826
Fer De Rabot Bois

144078826
E73-301FER RAB0T B0IS FENTE 45: RNCC: 2 | RNVC: 2

5 Mar 1986

5110-99-910-5316

5110-15-220-2118
Pinza A Becco Tondo

152202118
0-84-074: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-622-7316
Fireman's Strap Cutting Knife

226227316
20122266: RNCC: 3 | RNVC: 2

29 Jul 2011

5110-15-216-2556
Sega Per Cornici

152162556
5110RN0401960: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-244-0724

5110-15-208-4889
Pialla

152084889
5PLECHDP50X235: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-244-0696

5110-15-208-5382
Sega

152085382
3NANLXDSNNNP03S130: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-285-2750
Disarming Tool Mk1

222852750
275.27.09.00: RNCC: 3 | RNVC: 2
275.56.10.00: RNCC: 3 | RNVC: 2
275.95.09.00: RNCC: 3 | RNVC: 2

16 Apr 2002

5110-15-065-2038
Adz

150652038
192-0881/11: RNCC: 3 | RNVC: 2

7 Sep 1984

5110-12-141-1420
Hand Masonry Drill

121411420
NO PRIMARY REF 12-141-1420: RNCC: 3 | RNVC: 2
600003: RNCC: 5 | RNVC: 9
3046-3: RNCC: 5 | RNVC: 9
98-1-2-3-6: RNCC: 5 | RNVC: 9

30 May 1969

5110-19-004-3521
Hand File

190043521
8AT-9105-10-9: RNCC: 3 | RNVC: 2

26 Jan 2011

5110-32-001-1424
Firmer Chisel

320011424
SAF-SP-C-0033: RNCC: 4 | RNVC: 1

9 Sep 1976

5110-12-120-9366
Hand File

121209366
2122203: RNCC: 3 | RNVC: 2
2122-200-3: RNCC: 5 | RNVC: 2
C100X3DIN8342: RNCC: 5 | RNVC: 9

30 May 1969

5110-34-038-0602
Paper Cutter

340380602
PIN/3M-9021NB: RNCC: 3 | RNVC: 2
004493-354098: RNCC: 5 | RNVC: 9

20 Jun 2008

5110-12-135-4130
Firmer Chisel

121354130
NO PRIMARY REF 12-135-4130: RNCC: 3 | RNVC: 2
B40HLDIN5141: RNCC: 5 | RNVC: 9
B40HLDIN5141MG: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-439-4439

5110-15-191-6667
Pedale

151916667
PEDALE: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-176-8766
Cacciavite Logic Ad

151768766
327016: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-190-8858
Barranine Ferro Pun

151908858
BARRANINEINFERRO1600X60MM: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-22-117-9821
Valve Seat Hand Tap

221179821
HB25056: RNCC: 3 | RNVC: 2

14 Dec 1981

5110-12-156-3204
Sealing Surface Milling Cutter

121563204
5120-50-30UND45DEG: RNCC: 3 | RNVC: 2
512050DM45X30GRAD: RNCC: 5 | RNVC: 2

30 May 1969

5110-12-357-6630
Diagonal Cutting Pliers

123576630
780/145: RNCC: 3 | RNVC: 2

10 Jul 2002

5110-99-666-1808
Hand File Set

996661808
NO PRIMARY REF 99-666-1808: RNCC: 3 | RNVC: 2
26965: RNCC: 5 | RNVC: 2

8 Jun 2004

5110-66-114-1798
Edge Cutting Trimming Tool

661141798
707/541: RNCC: 3 | RNVC: 2

14 May 1982

5110-66-012-0763
Firmer Chisel

660120763
4 3-4IN X 1-2IN: RNCC: 3 | RNVC: 2
16-254: RNCC: 3 | RNVC: 2
16-146: RNCC: 5 | RNVC: 9
16-708: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-99-910-5329

5110-15-165-3830
Lima Per Meccanica

151653830
256636: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-321-3873
Ventilsit Fuehrung

123213873
218.71.080: RNCC: 3 | RNVC: 2

11 May 1990

5110-20-007-3739
Bolt Cutter

200073739
NBC900HT: RNCC: 3 | RNVC: 2

8 Jan 2013

5110-17-701-4901
Hand Reamer

177014901
16-5H7DIN206SS: RNCC: 2 | RNVC: 1
DIN206: RNCC: 4 | RNVC: 1

27 Apr 1970

5110-15-192-9868
Chiavi Per Radiator

151929868
3550001: RNCC: 3 | RNVC: 2
(241)AD7823550001: RNCC: 5 | RNVC: 2

31 Mar 2010

5110-15-222-0560
Coltello

152220560
KER1550: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-849-7987
Hand Cold Chisel

218497987
39GP43: RNCC: 4 | RNVC: 1
5110-0146: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-27-019-4350
Hand File

270194350
10091KEGE0013: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-22-612-4573
Single Bow Cutting Punch

226124573
71509: RNCC: 3 | RNVC: 2

12 Jan 2006

5110-34-041-2933
Hand Operated Wire Rope Cutter

340412933
1299504702: RNCC: 3 | RNVC: 2
1299504702: RNCC: 6 | RNVC: 9

26 Sep 2011

5110-27-028-4870
Hand File

270284870
NF1608: RNCC: 2 | RNVC: 1
NF1608: RNCC: 2 | RNVC: 1

4 Jan 2006

5110-15-230-5980
Scalpello A Taglien

152305980
1702N/70: RNCC: 3 | RNVC: 2
511015E155326: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-214-2091
Lame Bahco 300Mm. I

152142091
206-1978: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-613-7484
Hand Hacksaw Blade

226137484
3851-27-0.9-R-10: RNCC: 3 | RNVC: 2

25 Jul 2006

5110-12-347-6313
Hand Reamer

123476313
DIN206-B1,8-HSS: RNCC: 2 | RNVC: 2

18 Jan 1999

5110-25-103-7462
Hand Side Cutting Chisel

251037462
NO PRIMARY REF25-103-7462: RNCC: 3 | RNVC: 2
217222-4: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-21-852-9117
End Cutting Nippers

218529117
PL804 1-2: RNCC: 3 | RNVC: 2
PL804 1-2F: RNCC: 3 | RNVC: 2
65-4C: RNCC: 5 | RNVC: 2
025316: RNCC: 5 | RNVC: 9
65-4 1/2: RNCC: 5 | RNVC: 9
025316: RNCC: 5 | RNVC: 9

24 Feb 1969

5110-12-367-1593
Hand Cable Stripper

123671593
BN541318: RNCC: 3 | RNVC: 2
541318-00: RNCC: 5 | RNVC: 2

13 Jul 2005

5110-12-156-3219
Fraeserdorn

121563219
5115: RNCC: 3 | RNVC: 2
6-081-598-6500-2: RNCC: 5 | RNVC: 9
6.081.598.6500.2: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-268-6315

5110-13-102-8903
Hand Reamer

131028903
NBN485H8-7-5CS: RNCC: 2 | RNVC: 2

1 Apr 1975

5110-12-141-1690
Hand File

121411690
DIN7261-B250-3: RNCC: 2 | RNVC: 2
3122253: RNCC: 3 | RNVC: 2
1122-250-3: RNCC: 3 | RNVC: 2
B250-3DIN7261: RNCC: 5 | RNVC: 2
1126-250-3: RNCC: 5 | RNVC: 9
C250X3DIN8333: RNCC: 5 | RNVC: 9
DIN7261B250-3: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-176-7962
Cesoia Per Cavi Ele

151767962
7150-230: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-25-116-5348

5110-17-113-7848
Diagonal Cutting Pliers

171137848
123651604: RNCC: 3 | RNVC: 2

24 Jan 2001

5110-15-216-4752
Cesoia Tipo Abore

152164752
4KCACNCN: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-303-2744
Coffret Decoupoirs

143032744
MEKAN0401: RNCC: 3 | RNVC: 2

1 Jan 1973

5110-15-184-8056
Tagliadisco

151848056
NSN511015R575016: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-209-3001
Segaccio Da Mm.400

152093001
SEGACCIODAMM.400: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-214-8064
Center Punches

152148064
SPC75: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-218-7794
Raschietto Triangol

152187794
C742: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-812-3732

5110-99-773-1121

5110-15-165-4278
Scalpello Per Legno

151654278
825216: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-216-3374
Chiave Raccordi Tub

152163374
24X27: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-851-2143
Hand File

218512143
5110-0402: RNCC: 3 | RNVC: 2

2 Aug 1968

5110-14-526-6972
Tinner's Hollow Cutting Punch

145266972
NO PRIMARY REF14-526-6972: RNCC: 3 | RNVC: 2
611069: RNCC: 5 | RNVC: 9

24 Aug 2001

5110-14-040-7327
Coupe Sangle Nu

140407327
INC2-101A: RNCC: 3 | RNVC: 2

1 Jan 1972

5110-12-320-6614
Bucksaw Blade

123206614
NO PRIMARY REF 12-320-6614: RNCC: 3 | RNVC: 2
248B-700 FESTE ANGEL: RNCC: 5 | RNVC: 9

5 Feb 1990

5110-17-040-5026
Pocket Knife

170405026
18418: RNCC: 3 | RNVC: 2
TVA7340-2-6-001: RNCC: 3 | RNVC: 2

6 May 1968

5110-17-109-5793
4- Drukknoopstempel

171095793
501/500-HANDSLAGSTEMPELSET: RNCC: 3 | RNVC: 2

21 Nov 1995

5110-15-212-7255
Sega A Tazza Con De

152127255
HM9008-90: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-303-2727
Hand Masonry Drill Set

143032727
4492M3AM24: RNCC: 3 | RNVC: 9

1 Jan 1973

5110-15-208-3147
Alesatore

152083147
3AAXFCFRDP5-25: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-570-8968
Hand File

145708968
LPM-20-ME: RNCC: 3 | RNVC: 2

1 Feb 2012

5110-21-842-7692
Block Plane

218427692
60 1/2P: RNCC: 3 | RNVC: 2
12-060: RNCC: 3 | RNVC: 2
60 1-2: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-66-149-8293
Tinner's Hollow Cutting Punch

661498293
NO PRIMARY REF 66-149-8293: RNCC: 3 | RNVC: 2
07235807: RNCC: 5 | RNVC: 2

14 Apr 2003

5110-21-105-2367
Crosscut Hand Saw

211052367
D8: RNCC: 3 | RNVC: 1
46-GP-4: RNCC: 4 | RNVC: 1
GGGS65: RNCC: 4 | RNVC: 1
1520: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-66-113-5260

5110-43-001-2505
Hand Metal Cutting Shears

430012505
31-035: RNCC: 3 | RNVC: 2
5907558400595: RNCC: 5 | RNVC: 2

5 Jul 2011

5110-17-701-5801
Hand File

177015801
NO PRIMARY REF 17-701-5801: RNCC: 3 | RNVC: 2

14 May 1970

5110-33-208-4821
Hand Metal Cutting Punch And Die

332084821
44-904: RNCC: 3 | RNVC: 2
8413947449047: RNCC: 5 | RNVC: 2

14 Jul 2010

5110-15-134-5383
Alesatore Acciaio A

151345383
4520-28-5: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-17-110-7351
Hand Reamer

171107351
P926-0,1310-0,1250: RNCC: 3 | RNVC: 2
P926-: RNCC: 6 | RNVC: 9

18 Feb 1997

5110-34-031-2119
Spare Wheel Lever

340312119
TRACK 3 TON ISUZU NPR-8: RNCC: 3 | RNVC: 2
TRACK 3 TON ISUZU NPR-8: RNCC: 6 | RNVC: 9

24 Feb 2004

5110-23-113-7808
D 45.5 E7 Cam Bushi

231137808
T813-01-76: RNCC: 3 | RNVC: 2

30 May 2003

5110-15-208-4834
Alesatore

152084834
3AAXFCFRDP12: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-17-007-5204
Firmer Gouge

170075204
1512.12: RNCC: 3 | RNVC: 2

17 Jun 1972

5110-99-302-2766
File Handle

993022766
600200180: RNCC: 3 | RNVC: 2

3 Jul 1998

5110-99-773-1122

5110-12-126-2111
Hand Metal Cutting Shears

121262111
NO PRIMARY REF 12-126-2111: RNCC: 3 | RNVC: 2
4725-250: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-221-3783
Hand File

222213783
FOR.DOBBELTHUGGET,10IN: RNCC: 3 | RNVC: 2
72-0733-6: RNCC: 6 | RNVC: 9

11 Dec 1972

5110-15-216-1703
75 Filiera 11X0

152161703
SKF11X0-75: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-010-5187

5110-17-030-9192
Boormal

170309192
161800: RNCC: 3 | RNVC: 2
161800: RNCC: 5 | RNVC: 9

17 Jun 1972

5110-13-103-0054
Rabbet Plane

131030054
B101-20: RNCC: 3 | RNVC: 9

1 Apr 1975

5110-21-637-5960
Hand Reamer

216375960
B174-2: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1

6 Jun 1968

5110-99-910-5294
Hacking And C Knife

999105294
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H1519: RNCC: 6 | RNVC: 9
H1519: RNCC: 6 | RNVC: 9
FA14954: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-375-0060
Tube Cutter

123750060
KL-0131-51: RNCC: 3 | RNVC: 2

11 Apr 2008

5110-25-100-1984
Hand Cold Chisel

251001984
C21: RNCC: 3 | RNVC: 2
C25: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-15-186-3319
Lame Di Ricambio Pe

151863319
FIX3012: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-142-3660

5110-15-206-4523
Seghetto Per Corn.

152064523
SEGHETTOPERCORN: RNCC: 3 | RNVC: 2
(241)AFA97SEGHETTOPERCORN: RNCC: 5 | RNVC: 2

12 Jun 2012

5110-15-123-2476
Tagliadadi

151232476
1411G3: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-526-3044
Exposed Blade Tube Deburring Tool

145263044
D9851M1008: RNCC: 3 | RNVC: 2

18 Jul 2001

5110-14-249-9386

5110-15-215-5058
Alesatore Regolabil

152155058
9020-9-10: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-199-0750
Double Bow Cutting Punch

151990750
3703-16: RNCC: 3 | RNVC: 2
C3703-16: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-99-468-0825
Dreadnought File

994680825
NO PRIMARY REF 99-468-0825: RNCC: 3 | RNVC: 2
DEF1098: RNCC: 5 | RNVC: 1
1A1000: RNCC: 6 | RNVC: 9

24 Oct 1979

5110-27-018-6072
Hand Reamer

270186072
5110-42276-00008: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-218-0302
Scalpello Muratore

152180302
602-400: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-910-5756
Hand Hacksaw Blade

999105756
AE44W: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-99-910-5732
Woodmans Saw Blade

999105732
UKD1SPR0V2108: RNCC: 3 | RNVC: 2
FA16626: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-17-700-9755
Turning Chisel

177009755
1711.12: RNCC: 3 | RNVC: 2

15 May 1970

5110-13-102-8937
Hand Reamer

131028937
D0C98-6: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-12-190-6452
Hand File

121906452
2152141: RNCC: 3 | RNVC: 2
2402-140-1: RNCC: 3 | RNVC: 2
2152-140-1: RNCC: 3 | RNVC: 9

7 Dec 1981

5110-15-165-4198
Troncabulloni Da Mm

151654198
1961050: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-215-3997
Pinza Becchi Mezzi

152153997
282A0002: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-371-7717
Diagonal Cutting Pliers

143717717
8160: RNCC: 3 | RNVC: 2
30-14PCV: RNCC: 5 | RNVC: 2
85-691-5397: RNCC: 6 | RNVC: 9

5 Aug 1981

5110-14-271-6077
A Main Lime

5110-12-131-4712
Hand Reamer

121314712
131.21.000: RNCC: 3 | RNVC: 2
131-21-000: RNCC: 5 | RNVC: 9
700-5HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-27-028-4863
Hand File

270284863
NF1607: RNCC: 2 | RNVC: 1
NF-1607: RNCC: 2 | RNVC: 1
NF1607: RNCC: 2 | RNVC: 1

4 Jan 2006

5110-12-120-7516
Auger Handle

121207516
DIN7482-25: RNCC: 2 | RNVC: 2
25DIN7482: RNCC: 5 | RNVC: 2

30 May 1969

5110-66-036-1723
Single Bow Cutting Punch

660361723
96-2IN: RNCC: 3 | RNVC: 1
F2479: RNCC: 3 | RNVC: 1

1 Aug 1970

5110-99-742-4769
Engineers File

5110-25-102-4120
Hand Reamer

251024120
27-32T015-16IN: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-15-136-2954
Cesoie Tagliacavo

151362954
148A280: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-27-010-6608
Hand File

270106608
99999-NIIN-DA0037311: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-98-107-7161
Hand Reamer

981077161
PARALLEL29/32X4-1/2X9IN.: RNCC: 3 | RNVC: 2

10 Feb 1984

5110-17-111-6579
Chain Drill Attachment

171116579
PM4110-1522: RNCC: 3 | RNVC: 2

10 Mar 1998

5110-21-114-3067

5110-99-129-4743

5110-21-000-7468

5110-22-618-0690
Tube Cutter

226180690
00038781: RNCC: 3 | RNVC: 2

13 Oct 2008

5110-15-208-4874
Pinze Speciali

152084874
3PANSPCNSPI: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-4891
Pialla

152084891
5PLELUDL68X800: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-165-4272
Scalpello In Acciai

151654272
361021: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-4074
Scalpello Taglio Di

151654074
36024150: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-129-5484

5110-25-110-7266

5110-15-186-5466
Punzone Grand. Mm 9

151865466
ART-3616/1-MM9: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-910-5171
Auger Handle

999105171
A3-9807-3: RNCC: 3 | RNVC: 2
A3-9807: RNCC: 5 | RNVC: 1
FA14329: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-4962
Hand File

999104962
DEF1098: RNCC: 4 | RNVC: 1
FA13607: RNCC: 6 | RNVC: 9
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
1A941: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-19-001-0185
Metal Cutting Hand Saw

190010185
DCN4-9091: RNCC: 3 | RNVC: 2

13 Apr 2004

5110-99-120-2188
Hand Reamer

991202188
BS3088: RNCC: 4 | RNVC: 1
H02746: RNCC: 5 | RNVC: 2
H11: RNCC: 5 | RNVC: 2
DEFSTAN51-9: RNCC: 6 | RNVC: 9
16399: RNCC: 6 | RNVC: 9
1G269: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-226-0320

5110-21-866-8566

5110-14-244-0769

5110-99-990-0347
Hand Cape Chisel

999900347
RE100CH250X24: RNCC: 3 | RNVC: 2

22 Mar 2006

5110-12-313-3560
Reamer Blade Set

123133560
120.24.400: RNCC: 3 | RNVC: 2

24 Mar 1988

5110-14-409-4670
Single Bow Cutting Punch

144094670
60213-2MM: RNCC: 3 | RNVC: 2

28 May 1986

5110-27-045-7429
End Cutting Nippers

270457429
7814-0132 8XF KD21.XR GOST 28037: RNCC: 3 | RNVC: 2

10 Jun 2009

5110-12-187-2729
Plumber's Saw Blade

121872729
51843008: RNCC: 3 | RNVC: 2
8266286: RNCC: 3 | RNVC: 2
666-017: RNCC: 3 | RNVC: 2
4046526: RNCC: 3 | RNVC: 2
40026107: RNCC: 3 | RNVC: 2

26 Mar 1981

5110-33-200-1634
Firmer Chisel Set

332001634
9060.080: RNCC: 3 | RNVC: 2

26 Oct 2001

5110-15-208-3646
Alesatore

152083646
3AAXFCFRDP5-1: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-220-1630
Sguaina Cavi Per Ca

152201630
163-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-4591
Alesatore Conico Pe

152084591
3AAXFPFMBQ1-5X2-4: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-134-4581
Punzone In Acciaio

151344581
6556-8: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-14-451-4106
Double Bow Cutting Punch

144514106
245.J2DIAM28: RNCC: 3 | RNVC: 2

19 Nov 1991

5110-21-639-6169
Saw Handle

216396169
D8: RNCC: 3 | RNVC: 1
5110-0801: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-14-310-4979
Socle Decoupage

143104979
568-5-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-66-150-5331

5110-25-142-6397

5110-99-120-3438

5110-15-137-9598
Tronchese Elettroni

151379598
1188002: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-137-9812
Spaccadadi

151379812
1709018: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-208-4505
Alesatore

152084505
3AARGERMCN15-5X18X60: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-165-4078
Scalpello

151654078
35125: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-21-888-3977
Punch And Die Punch

218883977
2: RNCC: 3 | RNVC: 1
2-1/16: RNCC: 3 | RNVC: 1

21 Mar 1982

5110-12-126-1396
Draw Knife

121261396
NO PRIMARY REF 12-126-1396: RNCC: 3 | RNVC: 2
200DIN7233: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-213-9865
Estrattore Per Gira

152139865
185000025F0: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-210-5152
Lame Ricambio Cutte

152105152
IM80915: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-910-5310
Plane Cutter Bit

999105310
H1724: RNCC: 3 | RNVC: 2
F1FA15562: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-25-131-1110
Fil For Rytter

5110-99-942-6278
Hand Hacksaw Blade

999426278
DEF STAN 51-11 PART 7: RNCC: 4 | RNVC: 1
BS1919: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT7: RNCC: 6 | RNVC: 9
H5542: RNCC: 6 | RNVC: 9
1G361: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-158-7163
Hand Reamer

661587163
TF01529-5: RNCC: 3 | RNVC: 2

25 Jun 2010

5110-98-205-5140
Hand Hacksaw Frame

982055140
DFAMPD00102 A: RNCC: 2 | RNVC: 2

19 Jan 2001

5110-21-639-5542
Tinner's Hollow Cutting Punch

216395542
101-1/2: RNCC: 3 | RNVC: 2
39GP44: RNCC: 4 | RNVC: 1

4 Jun 1968

5110-21-637-5439
Hand Reamer

216375439
B94-2: RNCC: 3 | RNVC: 1
B174-2: RNCC: 3 | RNVC: 1
712-050111: RNCC: 3 | RNVC: 2
B5-14: RNCC: 4 | RNVC: 1
50-10985: RNCC: 5 | RNVC: 9

4 Jun 1968

5110-99-147-7075
Hand Wire Stripper

991477075
3756: RNCC: 3 | RNVC: 1
3756-0.6/22: RNCC: 5 | RNVC: 2
3756-0.6MM/22AWG: RNCC: 5 | RNVC: 2

12 Mar 2003

5110-22-603-7269
Hand File

226037269
LA 2408 HIEB 3 140MM: RNCC: 3 | RNVC: 2

13 May 2003

5110-15-136-2460
Cesoia A Lame Dritt

151362460
2050-260: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-14-480-8081
End Cutting Nippers

144808081
GS6-170: RNCC: 3 | RNVC: 2

3 Apr 1996

5110-99-423-8734
Metal Mar Stamp Set

994238734
NO PRIMARY REF 99-423-8734: RNCC: 3 | RNVC: 2
9084-8: RNCC: 5 | RNVC: 2
566043: RNCC: 6 | RNVC: 9

23 Feb 1978

5110-98-203-6768
Seaman's Knife

982036768
CM13999: RNCC: 3 | RNVC: 2

2 Aug 1990

5110-20-003-8172
Ladies' Scissors

200038172
22N: RNCC: 3 | RNVC: 2

3 Jan 2008

5110-41-000-0459
Hand File Set

410000459
10509456: RNCC: 3 | RNVC: 2

2 Mar 2006

5110-15-165-3663
Alesatore Registrab

151653663
1482G275315: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-910-4883
Hand File

999104883
DEF1098: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
9104883: RNCC: 6 | RNVC: 9
1A3827: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-25-103-9141
Hand Reamer

251039141
23-5T025MM: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-14-530-3582
Decoupejoin Element

145303582
245A.B2: RNCC: 3 | RNVC: 2
3148511581902: RNCC: 5 | RNVC: 2

5 Jun 2002

5110-12-127-4828
Straight Trimmers Shears

121274828
43802: RNCC: 3 | RNVC: 2

30 May 1969

5110-15-165-3912
Utensile Da Tornio

151653912
7771816: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-27-024-7724
Diagonal Cutting Pliers

270247724
3700 16 2140: RNCC: 2 | RNVC: 1

1 Dec 2004

5110-27-010-3630
Hand Reamer

270103630
10131KR0071: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-208-4153
Lima

152084153
3LCNMZCND0N355-6: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-853-7548
Single Bow Cutting Punch

218537548
147: RNCC: 3 | RNVC: 1

11 Jan 1969

5110-99-910-5088
Hand File

999105088
COORDPATH4097: RNCC: 2 | RNVC: 2
H21300: RNCC: 5 | RNVC: 2
DEFSTAN51-11PT6: RNCC: 6 | RNVC: 9
FA13591: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-144-3473
Lima Di Precisione

151443473
2300D160B: RNCC: 3 | RNVC: 2
2644-160-2: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-21-637-5285
Hand Reamer

216375285
B174-2I: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
50-10938: RNCC: 3 | RNVC: 2
GGGR180: RNCC: 4 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1
4500 7-16: RNCC: 5 | RNVC: 2

25 May 1968

5110-25-152-2723
Bearing Scraper

251522723
72060005: RNCC: 3 | RNVC: 2

11 Sep 2006

5110-66-150-4060
Tube Cutter Cutting Wheel

661504060
NO PRIMARY REF 66-150-4060: RNCC: 3 | RNVC: 2
07049802: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-12-126-1394
Hand Oil Groove Chisel

121261394
NO PRIMARY REF 12-126-1394: RNCC: 3 | RNVC: 2
13DIN6454: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-340-3713
File Handle

123403713
210-1: RNCC: 3 | RNVC: 2
210,1: RNCC: 5 | RNVC: 2

29 Mar 1996

5110-99-942-0018
Hand Reamer

999420018
BS122 PART 2: RNCC: 4 | RNVC: 1
BS122PT2: RNCC: 6 | RNVC: 9
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-262-8124
Tariere Torse A Vis

142628124
12-4-24: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-98-205-7844
File Handle

982057844
DFAMPD02344: RNCC: 2 | RNVC: 2

28 Aug 2002

5110-15-215-2524
Tronchese

152152524
425: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-165-4282
Lima Per Sega

151654282
2587: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-21-805-9512

5110-27-045-1041
Hand Cape Chisel

270451041
L50-18: RNCC: 2 | RNVC: 1

7 Apr 2009

5110-15-136-3724
Alesatore Cilindric

151363724
H1466-14: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-21-849-7497
Woodworking Butt Chisel

218497497
4: RNCC: 3 | RNVC: 1
750C: RNCC: 3 | RNVC: 1
1F21200: RNCC: 5 | RNVC: 9
5110-0099: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-12-371-2562
Brick Chisel

123712562
351 300 1: RNCC: 3 | RNVC: 2
110HS-316: RNCC: 3 | RNVC: 2
00.06.68.86: RNCC: 5 | RNVC: 2
8732840: RNCC: 5 | RNVC: 2

7 Mar 2007

5110-99-560-1342
Hand Cold Chisel

995601342
CB68V: RNCC: 3 | RNVC: 2
2226A: RNCC: 5 | RNVC: 1
BDC4288: RNCC: 5 | RNVC: 2
01-0198-7: RNCC: 5 | RNVC: 2

10 Aug 1981

5110-15-123-6887
Tronchese A Taglien

151236887
364: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-124-0744
Tagliavetro

151240744
6126-6: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-156-1640
Hand File

121561640
M465-04: RNCC: 3 | RNVC: 2
M465-04: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-814-1231
Die Dimpling Body

218141231
ZT177201-#10: RNCC: 3 | RNVC: 2
ZT177201-10: RNCC: 5 | RNVC: 2

13 Jun 1964

5110-15-192-4988
Chiavi A Forchetta

151924988
550162: RNCC: 3 | RNVC: 2
(241)AJ236550162: RNCC: 5 | RNVC: 2

22 Mar 2010

5110-15-189-6101
Archetto Per Seghet

151896101
ARCHETTO: RNCC: 3 | RNVC: 2

26 Feb 2010

5110-17-105-3102
Mitra Schraapstaal

171053102
5110 021: RNCC: 3 | RNVC: 2

26 Feb 1991

5110-14-511-3865
Cutting Punch Insert

145113865
245A.T4: RNCC: 3 | RNVC: 2
158223: RNCC: 5 | RNVC: 2
3148511582237: RNCC: 5 | RNVC: 2

16 Dec 1998

5110-22-613-5818
Electricians' Scissors

226135818
8088-45: RNCC: 3 | RNVC: 2

29 Jun 2006

5110-22-623-6198
Woodcarving Gouge

226236198
422P-25: RNCC: 3 | RNVC: 2

20 Feb 2012

5110-25-120-4451
Craftsman's Knife

251204451
FS 5110-0702 POS 3: RNCC: 2 | RNVC: 2
3180-655-7: RNCC: 3 | RNVC: 2
211 9040: RNCC: 5 | RNVC: 2
211-9040: RNCC: 5 | RNVC: 2
63990060: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-12-137-9049
Gimlet

121379049
DIN7481-20: RNCC: 2 | RNVC: 2
281-20: RNCC: 3 | RNVC: 2
2-20: RNCC: 3 | RNVC: 2
M281-20: RNCC: 3 | RNVC: 2
20DIN7481: RNCC: 5 | RNVC: 2

30 May 1969

5110-14-210-5442

5110-12-121-3678
Gimlet

121213678
DIN6445-A2: RNCC: 2 | RNVC: 2
6.816-074.0: RNCC: 3 | RNVC: 2
206150: RNCC: 3 | RNVC: 2
A2DIN6445: RNCC: 5 | RNVC: 2
5635-2: RNCC: 5 | RNVC: 9
DIN6445A2: RNCC: 5 | RNVC: 9
6.816-074: RNCC: 5 | RNVC: 9
1323375711161220: RNCC: 5 | RNVC: 9
0808327546989: RNCC: 5 | RNVC: 9
TGL 48-75122: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-209-8240
Tagliapiastrelle

152098240
3660-06: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-013-2970
Ratchet Bit Brace

660132970
BS 1978: RNCC: 3 | RNVC: 1
A78: RNCC: 3 | RNVC: 1
02-780: RNCC: 3 | RNVC: 2
A78-10: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-99-434-7346
Wood Carving Gouge

994347346
DEF STAN 51-11:PART 27: RNCC: 4 | RNVC: 1
F1FA2013: RNCC: 6 | RNVC: 9

23 Nov 1982

5110-27-014-8396
Plumber's Saw Blade

270148396
14001YP20867: RNCC: 2 | RNVC: 1
DA0138570: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-15-136-3943
Lama Intercambiabil

151363943
140080: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-195-3061
Pocket Folding Multi-Tool

151953061
1776A: RNCC: 3 | RNVC: 2

14 Mar 2011

5110-15-184-6151
Ferro

151846151
3IANISSQ34: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-123-1969
Cesoia Tagliacavo

151231969
148A235: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-220-9476
Lime Tonde

152209476
8RLIME: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-221-2252
Utensile Per Taglio

152212252
7704731: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-883-1806
Hand File

218831806
PILLAR8IN: RNCC: 3 | RNVC: 1
40299: RNCC: 5 | RNVC: 2

3 Feb 1981

5110-21-899-4637
Plugging Chisel

218994637
190: RNCC: 3 | RNVC: 2

13 Jun 1985

5110-21-800-0660
Hand Reamer

218000660
GGGR180: RNCC: 4 | RNVC: 1
N: RNCC: 5 | RNVC: 2
RM2218: RNCC: 5 | RNVC: 2

1 Feb 1965

5110-15-175-2948
Maschera Eclissi

151752948
2603-2-8: RNCC: 3 | RNVC: 2
D2603/2-8: RNCC: 5 | RNVC: 2

14 Feb 2004

5110-15-165-4187
Estrattore Anello H

151654187
A69976771: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-22-221-4457

5110-22-221-3872
Hand File

222213872
OEBERG 2-301-16-2: RNCC: 5 | RNVC: 2

15 Jun 1977

5110-15-208-5309
Lima

152085309
3LCNTRCNMDN225: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-126-2933
Hand File

121262933
2142142: RNCC: 3 | RNVC: 2
2408-140-2: RNCC: 3 | RNVC: 2
F70X2DIN8342: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-167-0178
Diagonal Cutting Pliers

121670178
H80901-A130: RNCC: 3 | RNVC: 2
A130-S+HN80901 KZ722030: RNCC: 5 | RNVC: 2
D5238-A130-Z2: RNCC: 5 | RNVC: 2
H80901A130: RNCC: 5 | RNVC: 2
KZ722030: RNCC: 5 | RNVC: 2

11 Nov 1976

5110-99-541-4170
Hand Stencil Cutting Die Set

995414170
STAMPSSTEELLETTERSAT0Z15MMH1GH: RNCC: 3 | RNVC: 2
AS600837: RNCC: 5 | RNVC: 1

25 Apr 1991

5110-15-136-3780
Coltello

151363780
7332: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-25-103-9563
Hand File Set

251039563
3FILER: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-14-310-4961
Poincon Decoupage

143104961
568-4-5: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-199-1014
Fresa Per Legno

151991014
1372/0-13: RNCC: 3 | RNVC: 2

12 Jan 2005

5110-12-329-8803
Hand Reamer

123298803
HSS012011-3: RNCC: 3 | RNVC: 2

8 Oct 1992

5110-25-121-0565
Hand Metal Cutting Shears

251210565
2735: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-66-152-2167
Craftsman's Knife

661522167
NO PRIMARY REF 66-152-2167: RNCC: 3 | RNVC: 2
46568400: RNCC: 5 | RNVC: 2

18 Jun 2004

5110-99-679-8050
Reamerline

996798050
R6Y206/3: RNCC: 3 | RNVC: 2
26DL-96086: RNCC: 6 | RNVC: 9

20 Jun 2002

5110-14-244-0743

5110-99-910-5564
Tinner's Hollow Cutting Punch

999105564
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H1893: RNCC: 6 | RNVC: 9
FA15977: RNCC: 6 | RNVC: 9
DL9A-H1893: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
1K161: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-287-1162
Single Bow Cutting Punch

142871162
NO PRIMARY REF14-287-1162: RNCC: 3 | RNVC: 2
V41908EMP0RTEPIECE: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-17-701-4976
Sponning Beitel

177014976
2191: RNCC: 3 | RNVC: 1

14 May 1970

5110-17-700-9928
Firmer Gouge

177009928
1512.16: RNCC: 3 | RNVC: 2

18 May 1971

5110-12-337-6133
Bearing Scraper

123376133
NO PRIMARY REF 12-337-6133: RNCC: 3 | RNVC: 2
272-3: RNCC: 5 | RNVC: 9
10675-1: RNCC: 5 | RNVC: 9
72070001: RNCC: 5 | RNVC: 9

17 Mar 1995

5110-98-854-6865

5110-15-139-9073
Tronchese A Taglien

151399073
344MV/160: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-99-962-3549

5110-15-221-5773
Chiave A Bussola At

152215773
CHIAVEATT/3/4 MM30: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-123-6403
Lima Fresatrice Con

151236403
2610/1-12: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-373-7837
Diagonal Cutting Pliers

143737837
NO PRIMARY REF14-373-7837: RNCC: 3 | RNVC: 2
0140040: RNCC: 5 | RNVC: 2
171-22EL: RNCC: 5 | RNVC: 2
171.22EL: RNCC: 5 | RNVC: 2
3359223: RNCC: 5 | RNVC: 2

13 Nov 1981

5110-21-885-1873
Wood Scraper

218851873
W1-3/4: RNCC: 3 | RNVC: 2

21 Apr 1981

5110-22-623-6173
Hand File

226236173
21-393: RNCC: 3 | RNVC: 2
34433600: RNCC: 5 | RNVC: 2

20 Feb 2012

5110-99-458-1226

5110-99-446-8282

5110-12-343-1848
Knockout Punch And Die

123431848
109330: RNCC: 3 | RNVC: 2
109 330: RNCC: 5 | RNVC: 9

14 May 1997

5110-15-208-4883
Pialla

152084883
5PLECNSE46X250: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-392-7594
Chamfer Tool

993927594
TP844760: RNCC: 3 | RNVC: 2
7960: RNCC: 5 | RNVC: 1
7960000: RNCC: 5 | RNVC: 2
PCFCT: RNCC: 5 | RNVC: 2
EAN 5025201 420643: RNCC: 6 | RNVC: 9
DC IPT/DLOCV/CM1/2/130: RNCC: 6 | RNVC: 9

4 Nov 2002

5110-12-325-5963
Hand Hacksaw Blade

123255963
HHS-BJ-300X12,5/0,63: RNCC: 3 | RNVC: 2

20 Jun 1991

5110-15-209-6163
Raschianeve In Allu

152096163
RASCHIA: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-581-9299
Tube Cutter

995819299
CD5081/TD04/027: RNCC: 3 | RNVC: 2

15 Feb 2006

5110-27-004-3085
Hand Cape Chisel

270043085
05001MK0211: RNCC: 3 | RNVC: 2

28 Aug 1995

5110-13-102-8921
Hand Reamer

131028921
NBN485H8-17CS: RNCC: 2 | RNVC: 2

1 Apr 1975

5110-25-119-8465
Diagonal Cut Pliers

5110-98-103-3610

5110-99-433-4728

5110-25-120-0785
Diagonal Cut Pliers

5110-25-134-2810
Hullsag

5110-22-304-5300

5110-27-011-1255
Hand File

270111255
07002YE0032: RNCC: 2 | RNVC: 1

20 Jan 2003

5110-15-208-5014
Scalpello Da Murato

152085014
3SANMRRRZ300X20: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-17-108-1423
Knife Blade

171081423
2-11-916: RNCC: 3 | RNVC: 2

14 Jun 1994

5110-98-200-5772
Hand File

982005772
3702504: RNCC: 3 | RNVC: 2

26 Sep 1986

5110-99-465-9912

5110-12-309-0764
Hand File

123090764
2152162: RNCC: 3 | RNVC: 2
2402-160-2: RNCC: 3 | RNVC: 2
2-313-16-2-0: RNCC: 3 | RNVC: 2
2152-160-2: RNCC: 5 | RNVC: 2
51402202: RNCC: 5 | RNVC: 2

11 Dec 1986

5110-15-191-0269
Taglia Maiolica Tm1

151910269
TM180: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-215-4002
Tronchese Mm.160

152154002
341A0003: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-064-6976
Scutch Hammer Comb

660646976
261C: RNCC: 3 | RNVC: 2

10 Apr 1974

5110-12-182-0650
Ship Scraper

121820650
8165: RNCC: 3 | RNVC: 2

9 Jan 1980

5110-21-842-7373
Sleeve Bushing

218427373
SHEATHMASTERBUSHING3-14: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-14-261-4221
Bedane Menuisier

142614221
145-9: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-12-375-7900
Pocket Knife

123757900
5-511: RNCC: 3 | RNVC: 2

4 Jul 2008

5110-15-209-1072
Serie 6 Lime Tonde

152091072
ABC2602: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-123-6992
Tagliatubi Per Tubi

151236992
2416/0: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-13-110-5587
Diagonal Cutting Pliers

131105587
7290: RNCC: 3 | RNVC: 2

20 Oct 1976

5110-15-165-3829
Lima Per Meccanica

151653829
2566110: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-140-3184
Double Bow Cutting Punch

121403184
NO PRIMARY REF 12-140-3184: RNCC: 3 | RNVC: 2
5731-57: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-186-0917
Lama Per Tornire Si

151860917
9731G-20: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-14-289-1040
Double Bow Cutting Punch

142891040
376-38: RNCC: 3 | RNVC: 2
214-38: RNCC: 3 | RNVC: 2
4638-38: RNCC: 3 | RNVC: 9
345-11-38: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-15-208-5311
Lima

152085311
3LCN0VCNMDN300: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-428-7274

5110-21-639-4172
Ice Shaver

216394172
649E: RNCC: 3 | RNVC: 2

30 Nov 1965

5110-15-215-0705
Confezione Lame Pz.

152150705
C5283: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-467-3771

5110-98-107-8325
Hand Yoke Riveter

981078325
46: RNCC: 3 | RNVC: 2

12 Apr 1984

5110-19-003-7903
Hand File

190037903
03745: RNCC: 3 | RNVC: 2

20 Jul 2010

5110-66-013-7586
Hand Reamer

660137586
HAND REAMER: RNCC: 3 | RNVC: 1
650 4744: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-57-441-2233
Hand File

574412233
3S-90.10.00.060: RNCC: 3 | RNVC: 2

21 Dec 2012

5110-12-140-1359
Firmer Chisel

121401359
NO PRIMARY REF 12-140-1359: RNCC: 3 | RNVC: 2
B22HLDIN5141: RNCC: 5 | RNVC: 9
B22HLDIN5141MG: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-363-5203
Paper Cutter

123635203
TL5110-0027: RNCC: 2 | RNVC: 2
7520-10740: RNCC: 6 | RNVC: 9

24 Jun 2004

5110-22-607-3745
Hand File

226073745
1-100-12-3-0: RNCC: 3 | RNVC: 2
8019143: RNCC: 3 | RNVC: 2

11 Jun 2004

5110-14-310-4982
Poincon De Rabattag

143104982
568-7-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-99-609-1350

5110-14-300-8871
Hand Metal Cutting Shears

143008871
3914-32: RNCC: 3 | RNVC: 9

1 Jan 1973

5110-99-962-0054

5110-66-149-3757

5110-99-773-1164

5110-17-707-2444
Firmer Gouge

177072444
1312.26: RNCC: 3 | RNVC: 2
F1FA13985: RNCC: 6 | RNVC: 9

17 Jun 1972

5110-27-019-4360
Hand File

270194360
10091KEGE0027: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-215-5773
Tranciacavi Isolato

152155773
9527600: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-27-014-8936
Hand Reamer

270148936
3455ATF16424: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-98-851-7345

5110-99-433-4509

5110-99-769-8967
Metal Saw Handle

997698967
13: RNCC: 3 | RNVC: 2
130: RNCC: 5 | RNVC: 2
70-130R: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-66-149-8961
Pocket Knife

661498961
NO PRIMARY REF 66-149-8961: RNCC: 3 | RNVC: 2
07940613: RNCC: 5 | RNVC: 2

11 Apr 2003

5110-66-150-3294
Diagonal Cutting Pliers

661503294
NO PRIMARY REF 66-150-3294: RNCC: 3 | RNVC: 2
07203402: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-12-155-9464
Hand File

121559464
M469-202: RNCC: 3 | RNVC: 2
M469-202: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-213-6739
Serie Stampi Per Nu

152136739
SERIESTAMPIMM6: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-184-7322
Ferro Semplice Per

151847322
3IANSRSE62: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-21-639-5702

5110-21-870-0786
Dielectric Trim Jig

218700786
KTD25: RNCC: 3 | RNVC: 2

16 Aug 1973

5110-99-759-1105
Spot Face Cutter

5110-15-213-6455
Tagliadisco Regolab

152136455
3074-400: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-904-0442
Pocket Scissors

999040442
NO PRIMARY REF 99-904-0442: RNCC: 3 | RNVC: 2
3143790: RNCC: 5 | RNVC: 2

1 Jul 2008

5110-99-910-5920
Pinking Shears

999105920
TDS55-PATF129: RNCC: 2 | RNVC: 2
SEN10R111NCH: RNCC: 3 | RNVC: 2
SEN10R111NCH: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-14-449-0063
Double Bow Cutting Punch Set

144490063
1440A120: RNCC: 3 | RNVC: 2
91714542: RNCC: 5 | RNVC: 2
251A120: RNCC: 5 | RNVC: 2

24 Jul 1991

5110-98-103-3931
H Cutting Punch Set

5110-14-271-6029
A Main Lime

5110-13-102-8405
Pivot Double E File

131028405
1890.D.3212: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-99-942-0085
Hand Reamer

999420085
BS122 PART 2: RNCC: 4 | RNVC: 1
BS122PT2: RNCC: 6 | RNVC: 9
8.5MM PARALLEL HAND REAMER: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-124-0723
Cesoia A Leva

151240723
2100-36: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-667-6266
Seatbelt Cutter

996676266
NO PRIMARY REF 99-667-6266: RNCC: 3 | RNVC: 2
CS1000: RNCC: 5 | RNVC: 2

17 May 2010

5110-27-010-6687
Hand File

270106687
99999-NIIN-DA0037195: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-213-6637
Lima Abrasiva Da Mm

152136637
7628GA-120: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-004-9158
Scalpello Ottogonal

150049158
574P/215-350: RNCC: 3 | RNVC: 2

9 Dec 2013

5110-99-924-2676
Hollo Cutting Punch

5110-19-003-8353
Hand File

190038353
04776: RNCC: 3 | RNVC: 2

5 Aug 2010

5110-21-639-4837
Hand File Set

216394837
937404: RNCC: 3 | RNVC: 2
39GP53: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-12-368-9876
Double Bow Cutting Punch

123689876
0100740: RNCC: 3 | RNVC: 2
00.09.59.86: RNCC: 5 | RNVC: 2

10 May 2006

5110-12-388-5463
Hand Cable Stripper

123885463
1830856: RNCC: 3 | RNVC: 2
1830856: RNCC: 5 | RNVC: 2
4010886855225: RNCC: 5 | RNVC: 2
8147: RNCC: 5 | RNVC: 2
4010886855225: RNCC: 5 | RNVC: 2
8147: RNCC: 5 | RNVC: 2

29 Mar 2012

5110-12-130-7620
Plane Cutter Bit

121307620
NO PRIMARY REF 12-130-7620: RNCC: 3 | RNVC: 2
A3DIN7374: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-185-6267
Lame Bimetalliche A

151856267
500X40X1: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-187-5891
Leiterbahn Kratzer

121875891
022-00239G: RNCC: 3 | RNVC: 2

21 Apr 1981

5110-12-121-4114
Hand File

121214114
DIN7261-D400-1: RNCC: 2 | RNVC: 2
D400-1DIN7261: RNCC: 5 | RNVC: 2
C450X1DIN8337: RNCC: 5 | RNVC: 9
DIN7261D400-1: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-610-1760
Hand File

226101760
1-100-10-3-3: RNCC: 3 | RNVC: 2
7311518202644: RNCC: 5 | RNVC: 2

15 Apr 2005

5110-15-197-2561
Screw Thread Insert Breaker

151972561
PN UAS 00025892: RNCC: 3 | RNVC: 2
5120F76021102: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-33-108-4069
Hand Metal Cutting Shears

331084069
658.25: RNCC: 3 | RNVC: 2

2 Apr 2001

5110-27-015-5528
Hand File

270155528
14001YP21620: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-99-780-5378
Bolt Cutter Jaws

997805378
J918F: RNCC: 3 | RNVC: 2

15 Jun 1984

5110-99-432-8831

5110-99-432-8950

5110-15-194-8902
Tagliavetro

151948902
2-14-041: RNCC: 3 | RNVC: 2
(241)A61542-14-041: RNCC: 5 | RNVC: 2

31 Jan 2011

5110-21-849-6803
Bolt Cutter

218496803
1290NE: RNCC: 3 | RNVC: 2
5110-0211: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-12-368-0104
File Handle

123680104
FH3-10: RNCC: 3 | RNVC: 2

18 Nov 2005

5110-33-155-9820
Hand Metal Cutting Shears

331559820
911.022/1: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-15-192-8669
Forbici Da Potare F

151928669
FELCO5: RNCC: 3 | RNVC: 2

26 Mar 2010

5110-22-603-7279
Hand File

226037279
LR 12915 NR 4 150MM: RNCC: 3 | RNVC: 2

13 May 2003

5110-12-300-3735
Hand Cape Chisel

123003735
741-1: RNCC: 3 | RNVC: 2
4920500005: RNCC: 5 | RNVC: 2
263-2: RNCC: 5 | RNVC: 9
263/2: RNCC: 5 | RNVC: 9
3649-125: RNCC: 5 | RNVC: 9
3649-125-4: RNCC: 5 | RNVC: 9

27 Jul 1984

5110-22-607-3284
Hand File

226073284
1-170-12-2-0: RNCC: 3 | RNVC: 2
8020064: RNCC: 3 | RNVC: 2

8 Jun 2004

5110-99-910-4863
Hand File

5110-99-910-4839

5110-21-639-6437

5110-99-910-5104

5110-98-104-2093
Knife Blade

5110-99-835-5821

5110-17-111-2581
Paper Cutter

171112581
A4060-SPEED MAT: RNCC: 3 | RNVC: 2

21 Oct 1997

5110-15-233-4329
Seghetto Cut Per Po

152334329
FM240: RNCC: 3 | RNVC: 2
511015E014197: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-12-137-9594
Double Bow Cutting Punch

121379594
240-31: RNCC: 3 | RNVC: 2

30 May 1969

5110-21-851-3905
Double Bow Cutting Punch Set

218513905
27: RNCC: 3 | RNVC: 1
5110-0956: RNCC: 6 | RNVC: 9

6 Oct 1968

5110-98-107-6983
Hand Reamer

981076983
TAPER SPIRAL 11/64IN: RNCC: 3 | RNVC: 2

2 Feb 1984

5110-12-171-2510
Fraeswerkzeug

121712510
VG95211-ML-121712510: RNCC: 2 | RNVC: 2
105-31821W4: RNCC: 3 | RNVC: 2

21 Sep 1977

5110-12-329-8805
Hand Reamer

123298805
HSS012011-5: RNCC: 3 | RNVC: 2

8 Oct 1992

5110-14-573-9542
Nested Saws

145739542
Z-690-6: RNCC: 3 | RNVC: 2

23 Nov 2012

5110-15-054-2306
Single Bit Ax Handle

150542306
56-6-790: RNCC: 2 | RNVC: 2

1 Jan 1974

5110-12-121-8747
Lochpfeife

121218747
317-2: RNCC: 3 | RNVC: 2

30 May 1969

5110-15-237-7984
Giravite Torx

152377984
362/6: RNCC: 3 | RNVC: 2
511015E131165: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-21-807-1242
Hand Reamer

218071242
GGG-R-180: RNCC: 4 | RNVC: 1
649-5A: RNCC: 5 | RNVC: 2

5 Feb 1964

5110-22-607-3368
Hand File

226073368
3-330-12-1-0: RNCC: 3 | RNVC: 2
8020712: RNCC: 3 | RNVC: 2

9 Jun 2004

5110-15-215-4458
Squadra Metallica

152154458
SQUADRA CM 50: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-184-6147
Ferro

151846147
3IANISSQ24: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-215-4012
Inserto Lungo

152154012
390C0004: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-561-1353
Diagonal Cutting Pliers

145611353
192.14G: RNCC: 3 | RNVC: 2
3148516738462: RNCC: 5 | RNVC: 2
899571: RNCC: 5 | RNVC: 2

18 Jun 2009

5110-15-176-6140
Fresa Cilindrica 6M

151766140
ART53MM6: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-14-428-5479
Equipe Support

144285479
4602PSE103: RNCC: 3 | RNVC: 2

8 Dec 1988

5110-15-124-8211
Spazzola A Pennello

151248211
4012-11-30: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-910-5609
M Punch And Die Set

999105609
DL-9-A-H1962: RNCC: 2 | RNVC: 2
DEFSTAN51-10: RNCC: 6 | RNVC: 9
DL-9-A-H1962: RNCC: 6 | RNVC: 9
1C1862: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-190-8899
Punzoni Tondi Per C

151908899
9212: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-33-155-9581
Firmer Chisel

331559581
119.125/1: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-15-165-3699
Lima Piatta P.6' T.

151653699
260036: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-208-4817
Alesatore Cilin.Tip

152084817
3AAXFCFRDP3-8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-132-5224
Sgorbia Manicata -

151325224
5235G2-6: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-99-138-8309
Hand Crosscutti Saw

991388309
NO PRIMARY REF 99-138-8309: RNCC: 3 | RNVC: 2
T5: RNCC: 5 | RNVC: 2

4 Feb 1984

5110-27-013-2140
Single Bow Cutting Punch

270132140
570-31: RNCC: 2 | RNVC: 1

15 May 2002

5110-14-422-9373

5110-99-910-4932
Hand File

999104932
DEF1098: RNCC: 4 | RNVC: 1
H01031: RNCC: 5 | RNVC: 2
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
F1FA13527: RNCC: 6 | RNVC: 9
9104932: RNCC: 6 | RNVC: 9
1A1142: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-957-0848

5110-99-910-5118

5110-99-910-5130
Firmer Gouge

5110-99-910-5081

5110-15-199-0980
Gimlet

151990980
1378-8: RNCC: 3 | RNVC: 2

12 Jan 2005

5110-41-001-5686
Hand Cape Chisel

410015686
1404-032: RNCC: 3 | RNVC: 2

27 Sep 2010

5110-12-129-3929
Coping Saw Blade

121293929
TL5110-0032-2: RNCC: 2 | RNVC: 2
59877-111: RNCC: 3 | RNVC: 2
51821010: RNCC: 3 | RNVC: 2
511-011: RNCC: 3 | RNVC: 2
120716: RNCC: 5 | RNVC: 9
575F102-1: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-616-8349
Hand File Set

226168349
LX5519-10-2: RNCC: 3 | RNVC: 2

12 Mar 2008

5110-12-312-1029
Pipe Cutter

123121029
TL5110-0029-020: RNCC: 2 | RNVC: 2
153: RNCC: 3 | RNVC: 2
60010000: RNCC: 5 | RNVC: 2
230010: RNCC: 5 | RNVC: 9
53444030: RNCC: 5 | RNVC: 9
120464: RNCC: 5 | RNVC: 9
108075: RNCC: 5 | RNVC: 9
4485N: RNCC: 5 | RNVC: 9
TK-KG55-5110-309-020: RNCC: 5 | RNVC: 9
TK5110-309-020: RNCC: 5 | RNVC: 9

20 Nov 1987

5110-66-150-2174
Doweling Jig

661502174
NO PRIMARY REF 66-150-2174: RNCC: 3 | RNVC: 2
07154506: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-14-351-7944

5110-14-244-0748

5110-15-137-8352
Serie Lime Per Mecc

151378352
2568/6-8: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-16-002-5076
Hand Metalworking Chisel Set

160025076
270/630NN-A: RNCC: 3 | RNVC: 2

7 Nov 2002

5110-21-108-9574
Craftsman's Knife

211089574
1515-S: RNCC: 3 | RNVC: 2
1515S: RNCC: 3 | RNVC: 2
KCS: RNCC: 5 | RNVC: 2
1000046: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-15-221-3957
Punzone Diam. 21

152213957
PUNZ0NED21: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-041-1809

5110-99-667-2125
Saw Blade

996672125
TL-502-902: RNCC: 3 | RNVC: 2
TL-502-902: RNCC: 3 | RNVC: 9

29 Sep 2008

5110-99-433-5061
Electricians' Scissors

994335061
1934BS-5: RNCC: 3 | RNVC: 2
314-3699: RNCC: 5 | RNVC: 2

6 Mar 2000

5110-15-220-3412
Spazzola Per Mola D

152203412
7530: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-218-3268
Pinzetta Di Precisi

152183268
7/01506: RNCC: 3 | RNVC: 2

16 Nov 2005

Load More Results