What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 102 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 102of 112

5110-13-102-8905
Hand Reamer

131028905
NBN485H8-9CS: RNCC: 2 | RNVC: 2

1 Apr 1975

5110-14-325-1886
Pince Pour Fil Elec

143251886
NO PRIMARY REF14-325-1886: RNCC: 3 | RNVC: 2
W3R0UGE: RNCC: 5 | RNVC: 9
85-660-5460: RNCC: 6 | RNVC: 9

2 Jul 1975

5110-21-849-6671
Hand File

218496671
39GP30: RNCC: 4 | RNVC: 1
5110-0499: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-17-100-8878
File Handle

171008878
W00G906318-8CM-BOIS: RNCC: 3 | RNVC: 2

5 Aug 1986

5110-12-126-1376
Double Bow Cutting Punch

121261376
DIN7200-A10: RNCC: 2 | RNVC: 2
0100100: RNCC: 3 | RNVC: 2
TS5110-0821: RNCC: 5 | RNVC: 1
00.08.95.22: RNCC: 5 | RNVC: 2
A10DIN7200: RNCC: 5 | RNVC: 2
TS5110-0821-10MM: RNCC: 5 | RNVC: 2
A 10 DIN7200: RNCC: 5 | RNVC: 9
DIN7200A10: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-188-1857
Hand Rasp

121881857
DIN7263-A250-1: RNCC: 2 | RNVC: 2
19137-250-1: RNCC: 3 | RNVC: 2
1512-250-1: RNCC: 3 | RNVC: 2
A 250-1DIN7263: RNCC: 5 | RNVC: 2
A 250-1 DIN 7263: RNCC: 5 | RNVC: 9
DIN7263-A-250-1: RNCC: 5 | RNVC: 9
DIN7263-A250: RNCC: 5 | RNVC: 9
DIN7263A250: RNCC: 5 | RNVC: 9

11 Jun 1981

5110-27-010-6614
Hand File

270106614
99999-NIIN-DA0037333: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-66-149-9397
Craftsman's Knife

661499397
NO PRIMARY REF 66-149-9397: RNCC: 3 | RNVC: 2
06115915: RNCC: 5 | RNVC: 2

10 Apr 2003

5110-12-313-8475
Zange Einsatz

123138475
101610-6,5: RNCC: 3 | RNVC: 2
101610-6.5: RNCC: 5 | RNVC: 2

11 May 1988

5110-66-013-5170
Firmer Gouge

660135170
161: RNCC: 3 | RNVC: 1
M410X25MM: RNCC: 3 | RNVC: 2
16-908: RNCC: 3 | RNVC: 2
161: RNCC: 5 | RNVC: 1
FU061-08: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-21-903-3197
Skinning Knife

219033197
KNIFESKNNINGZ: RNCC: 3 | RNVC: 2
S-1843C: RNCC: 5 | RNVC: 2
KSK-SB-6: RNCC: 5 | RNVC: 2

26 Feb 1988

5110-25-126-6730
Fil

251266730
10100922: RNCC: 3 | RNVC: 2
U19-601-8MF: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-33-155-9826
Hand Metal Cutting Shears

331559826
921.025: RNCC: 3 | RNVC: 2

10 Jan 1991

5110-14-541-3765
Chain Saw Filing Guide

145413765
31437: RNCC: 3 | RNVC: 2

3 Jun 2004

5110-15-220-3770
Spatola Da 90

152203770
26-717: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-534-2792
Diagonal Cutting Pliers

145342792
429.MT: RNCC: 3 | RNVC: 2
3148511759738: RNCC: 5 | RNVC: 2

19 Mar 2003

5110-15-124-0026
Lama Al Widia Dia 2

151240026
2827-9425: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-123-9780
Disco Abrasivo A Ce

151239780
1115-115: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-305-8298
Knockout Punch And Die

123058298
18.520.6: RNCC: 3 | RNVC: 2
74331203: RNCC: 3 | RNVC: 9

19 Dec 1985

5110-21-639-5571
Hand Metal Cutting Punch And Die Set

216395571
5: RNCC: 3 | RNVC: 1
300050219: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-21-851-2319
Broad Hatchet

218512319
5110-0816: RNCC: 3 | RNVC: 2

6 Oct 1968

5110-15-165-3859
Serie Scalpelli Fal

151653859
1003216: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-21-859-0073
Punch And Die S Die

218590073
730R18: RNCC: 3 | RNVC: 2

16 Apr 1970

5110-15-214-4317
Punzoni Acciaio Tem

152144317
261.04: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-287-2196
Pliers

992872196
110079SH1747: RNCC: 3 | RNVC: 2
26VC-95476: RNCC: 6 | RNVC: 9

13 Aug 2004

5110-15-208-4647
Fustella

152084647
3FANGRF013: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-244-0892

5110-15-137-9136
Scalpello Piatto 25

151379136
0035005: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-175-6256
Lama Per Sega Dirit

151756256
323807: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-21-105-2045
Single Bow Cutting Punch

211052045
147: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-15-171-9872
Lama Kapriol Da Cm.

151719872
LAMA KAPRIOL DA CM.51: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-171-6518
Scalpello Da Mm.12

151716518
C9155: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-99-136-3967
Wood Scraper

5110-98-853-4537

5110-12-185-8361
Ripping Chisel

121858361
DIN6480-300: RNCC: 2 | RNVC: 2
4281A: RNCC: 3 | RNVC: 9
737B204-300: RNCC: 3 | RNVC: 9
300DIN6480: RNCC: 5 | RNVC: 9
KISTENBEITEL300DIN6480: RNCC: 5 | RNVC: 9

1 Nov 1980

5110-21-865-8288
Ice Chisel

218658288
26-1023: RNCC: 3 | RNVC: 2
0026-1023: RNCC: 5 | RNVC: 9

14 Apr 1972

5110-14-201-7020
Pliers

142017020
NO PRIMARY REF14-201-7020: RNCC: 3 | RNVC: 2
407: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-98-105-8777
Hand Reamer

981058777
NO PRIMARY REF 98-105-8777: RNCC: 3 | RNVC: 2
METRIC 2003-20MM: RNCC: 5 | RNVC: 2

30 May 1978

5110-12-129-4708
Bearing Scraper

121294708
NO PRIMARY REF 12-129-4708: RNCC: 3 | RNVC: 2
2487: RNCC: 5 | RNVC: 9
106408: RNCC: 5 | RNVC: 9

30 May 1969

5110-27-005-0781
Hand Cold Chisel

270050781
1010000717: RNCC: 3 | RNVC: 2

12 Feb 1997

5110-15-175-1385
Hand Metal Cutting Shears

151751385
204/300: RNCC: 3 | RNVC: 2

21 Jan 2004

5110-22-616-8347
Hand File Set

226168347
LX5579-10-2: RNCC: 3 | RNVC: 2

12 Mar 2008

5110-15-133-1115
Serie 6 Lime

151331115
2633: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-99-465-9915
Planing Iron

994659915
3B2668: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-15-165-3910
Utensile Da Tornio

151653910
7773020: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-208-5020
Scalpello

152085020
3SANMRPTZ350X20: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-27-048-1245
Hand File

270481245
NF 1407: RNCC: 2 | RNVC: 1

7 Jan 2010

5110-32-001-1410
Hand Hacksaw Frame

320011410
SAF-SP-F-006A: RNCC: 4 | RNVC: 1
SAF-SP-F-0006: RNCC: 5 | RNVC: 9

3 Oct 1976

5110-15-189-7306
Tronchese Taglio A

151897306
2450564: RNCC: 3 | RNVC: 2

26 Feb 2010

5110-14-244-0847

5110-15-213-3280
Lima Tonda Taglio B

152133280
1-230-10-1-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-221-2168
Hand Hacksaw Blade

222212168
BLAD 12IN,18 TAENDER PR. IN: RNCC: 3 | RNVC: 2
72-2307-5: RNCC: 6 | RNVC: 9

1 Dec 1972

5110-12-139-2506
Hand Reamer

121392506
043M00300: RNCC: 3 | RNVC: 2
VB52790: RNCC: 5 | RNVC: 2

30 May 1969

5110-12-357-6945
Wire Stripper Blade

123576945
900363: RNCC: 3 | RNVC: 2

15 Jul 2002

5110-25-132-4221
Hand Reamer

251324221
64924: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-15-126-0555
Scalpello Mm 300

151260555
3606: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-126-1207

5110-12-126-2938

5110-33-208-3808
End Cutting Nippers

332083808
8.280: RNCC: 3 | RNVC: 2
5110-33-P00-0718: RNCC: 6 | RNVC: 9

4 May 2010

5110-15-208-5537
Seghetto Traforo Le

152085537
3VANLE2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-27-013-3765
Kombine Pense Seti

270133765
10131KP0308: RNCC: 2 | RNVC: 1

10 Jun 2002

5110-66-016-5093
Recess Cutter

660165093
124004: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-15-074-6197
File Holder

150746197
12INART110MEZZ0T0NDA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-217-5351
Giratubi Beta 1176

152175351
EXRI7906402: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-17-042-7818
Hand File

170427818
12311000: RNCC: 3 | RNVC: 2

22 Jul 1973

5110-15-136-3717
Alesatore Cilindric

151363717
H1466-4-5: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-208-4510
Alesatore

152084510
3AAEFCFRDP5-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-910-6477
Hand Metal Stamping Die

999106477
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 5 | RNVC: 9
DL9A-H2625: RNCC: 5 | RNVC: 9
H2625: RNCC: 6 | RNVC: 9
FA17794: RNCC: 6 | RNVC: 9
H2625: RNCC: 6 | RNVC: 9
1C6225: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-27-050-4356
Ahsap Testere El

270504356
E14": RNCC: 2 | RNVC: 9

28 Jul 2010

5110-12-141-1709
Hand File

121411709
2102102: RNCC: 3 | RNVC: 2
2411-100-2: RNCC: 3 | RNVC: 2
2102-100-2: RNCC: 5 | RNVC: 2
2102T100-2: RNCC: 5 | RNVC: 9
M50X2DIN8342: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-312-3692
Hand File

123123692
DIN7264-E300-2: RNCC: 2 | RNVC: 2
1405302: RNCC: 3 | RNVC: 2
296-300-2: RNCC: 3 | RNVC: 2
1414-300-2: RNCC: 5 | RNVC: 9

21 Dec 1987

5110-21-801-0523
Nested Saws

218010523
100: RNCC: 3 | RNVC: 2
7: RNCC: 5 | RNVC: 9
N0 7 NEST OF SAWS: RNCC: 5 | RNVC: 9
5110-1082: RNCC: 6 | RNVC: 9

5 Feb 1964

5110-15-176-0709
Lama Bimetallica

151760709
3010X27-Z6/10: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-21-816-6396
Dimpling Die

218166396
ZT2953-3/16: RNCC: 3 | RNVC: 2
ZT2953-3-16: RNCC: 5 | RNVC: 2

28 Aug 1964

5110-17-125-0369
Docking Hand Saw

171250369
KS1513324: RNCC: 3 | RNVC: 2

23 Aug 2013

5110-21-851-3709
Hand File

218513709
39GP30: RNCC: 4 | RNVC: 1

6 Oct 1968

5110-14-418-5839
Pince Coupante

144185839
7314: RNCC: 3 | RNVC: 2

2 Sep 1987

5110-22-221-3820
8In Slet Knivfil

222213820
1176/3-200MM: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-21-809-1602
Hand File

218091602
MS15650-6: RNCC: 2 | RNVC: 2
39GP53: RNCC: 4 | RNVC: 1

9 Jun 1964

5110-15-136-3718
Alesatore Cilindric

151363718
H1466-5: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-172-6140
Serie Di Punzoni Ci

151726140
SERIE DI PUNZONI CIFRE MM. 8 MAS: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-137-9823
Lime Mezzotonde E P

151379823
1719C: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-17-801-9524
Hand Reamer

178019524
TVA5110-2-263-010/1.1.2: RNCC: 3 | RNVC: 2
TVA5110-2-263-010: RNCC: 5 | RNVC: 1

17 Jun 1972

5110-15-220-4884
Troncabulloni A Tag

152204884
980-460-18': RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-121-4092
Hand File

121214092
DIN7261-A400-1: RNCC: 2 | RNVC: 2
3112401: RNCC: 3 | RNVC: 2
1112-400-1: RNCC: 3 | RNVC: 2
1112-400-1: RNCC: 5 | RNVC: 2
A400-1DIN7261: RNCC: 5 | RNVC: 2
DIN7261A400-1: RNCC: 5 | RNVC: 9
1393711119135110: RNCC: 5 | RNVC: 9
0808396232529: RNCC: 5 | RNVC: 9
TGL 48-74110,400X40X9,1: RNCC: 5 | RNVC: 9
B450X1DIN8331: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-530-9925
Pipe Cutter

995309925
C112: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-25-117-5229

5110-14-393-9277

5110-15-218-6383
Coltello

152186383
KER3100: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-17-109-7443
Doweling Jig

171097443
ECA97: RNCC: 3 | RNVC: 2

23 Jan 1996

5110-15-189-6104
Tronchese Per Elett

151896104
66076110: RNCC: 3 | RNVC: 2

26 Feb 2010

5110-14-530-3578
Decoupejoin Element

145303578
245A.M3: RNCC: 3 | RNVC: 2
3148511582107: RNCC: 5 | RNVC: 2

5 Jun 2002

5110-15-123-6653
Tenaglia Per Cement

151236653
1098PL/250: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-25-103-6950
Hand Reamer

251036950
3SBF5110HVK6: RNCC: 2 | RNVC: 1
BR3940300: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-12-324-7585
Compass Saw Blade

123247585
147-8: RNCC: 3 | RNVC: 2
1490008: RNCC: 5 | RNVC: 2

21 Mar 1991

5110-21-859-0067
Punch And Die S Die

218590067
730R8: RNCC: 3 | RNVC: 2

16 Apr 1970

5110-15-221-9295
Scalpello Per Legno

152219295
1031-8: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-136-5587
Lama A Gancio

151365587
2817KH: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-161-8164
Spazzola A Tazza Co

151618164
SPAZZOLA A TAZZA CON PERNO DA 2,: RNCC: 3 | RNVC: 2

1 Oct 2000

5110-15-232-8647
Tronchese A Taglio

152328647
511015E101405: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-208-5318
Pettine Filettare M

152085318
4PINDC5X0-80: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-905-9962
Single Bow Cutting Punch

219059962
M-35: RNCC: 3 | RNVC: 2

5 Aug 1989

5110-15-211-0041
Punta

152110041
TE-CX8/22: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-923-8085
General Pu Hand Saw

999238085
72-66XR: RNCC: 3 | RNVC: 2
GM-121603: RNCC: 5 | RNVC: 2
F1FA16679: RNCC: 6 | RNVC: 9
0276-276016: RNCC: 6 | RNVC: 9
0276-923-8085: RNCC: 6 | RNVC: 9
66: RNCC: 6 | RNVC: 9
66X: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-131-4271
Reamerline

991314271
R6Y206/41: RNCC: 3 | RNVC: 2
26DL-96101: RNCC: 6 | RNVC: 9

20 Jun 2002

5110-15-143-4001
Utensile Da Tornio

151434001
777-16-12: RNCC: 3 | RNVC: 2
777/16-12: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-99-137-2736
Rabbet Plane

991372736
9S33MM: RNCC: 3 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H6979: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-105-2218
Hand Reamer

211052218
140: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
B174-2: RNCC: 3 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1

4 Jun 1968

5110-15-139-9129
Cacciaspine Esagona

151399129
536/180: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-27-011-3960
Hand File

270113960
99999-NIIN-DA0037160: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-171-5111
Chiave Fissa 8 X 09

151715111
CHIAVE FISSA 8 X 09 PASTORINO: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-192-4989
Serie Es. Maschio P

151924989
B000960372: RNCC: 3 | RNVC: 2
(241)AJ236B000960372: RNCC: 5 | RNVC: 2

22 Mar 2010

5110-15-144-3477
Foretto In Acciaio

151443477
4711G300: RNCC: 3 | RNVC: 2
5491-300: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-66-149-7497
Hand File

661497497
NO PRIMARY REF 66-149-7497: RNCC: 3 | RNVC: 2
07071207: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-15-136-2536
Affilatoio Con Lama

151362536
6044: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-14-574-3697
Rip Hand Saw

145743697
6331500001: RNCC: 3 | RNVC: 2

14 Jan 2013

5110-99-902-5150
Metal Saw Handle

999025150
KT-103-125: RNCC: 3 | RNVC: 2

28 Jun 2012

5110-15-208-4586
Alesatore Conico Pe

152084586
3AAXFPFMBQ1X1-7: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-233-0769
Lama 9Mm A 12 Eleme

152330769
511015E093897: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-196-9011
Electricians' Scissors

151969011
PN UAS 00008738: RNCC: 3 | RNVC: 2
6250F76021455: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-214-7159
Curvatubi

152147159
760-8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-23-113-9197
Tangle Wit Saw File

231139197
Q0400017: RNCC: 3 | RNVC: 2

12 Jun 2004

5110-21-846-8577
Pocket Knife

218468577
R2894: RNCC: 3 | RNVC: 2

15 Oct 1970

5110-21-896-7300
Bolt Cutter Jaws

218967300
H930-AA: RNCC: 3 | RNVC: 2

25 Nov 1984

5110-15-101-9803
Special Lima A Mano

151019803
53740: RNCC: 3 | RNVC: 2
53740: RNCC: 3 | RNVC: 2

31 Mar 1988

5110-15-138-0774
Sguainacavo Per Tag

151380774
164001: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-14-286-9118
Craftsman's Knife

142869118
662AFT0UL0N: RNCC: 2 | RNVC: 2

1 Jan 1972

5110-12-127-7388
Single Bow Cutting Punch

121277388
DIN7200-B16: RNCC: 2 | RNVC: 2
B16DIN7200: RNCC: 5 | RNVC: 2
DIN7200B16: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-245-9081
Decoupejoint Specia

142459081
245.T4: RNCC: 3 | RNVC: 2
DECOUPE JOINT FILETE 4MM: RNCC: 3 | RNVC: 2
245T4: RNCC: 5 | RNVC: 2
3148511580615: RNCC: 5 | RNVC: 2
0158061: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-15-208-4234
Lima

152084234
3LFEPQTSMDN355-6: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-910-9971
Hand Reamer

999109971
BS122 PART 2: RNCC: 4 | RNVC: 1
F1FA16231: RNCC: 6 | RNVC: 9
10129: RNCC: 6 | RNVC: 9
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-214-9864
Inserto

152149864
1578/7-3: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-373-4432
Firmer Chisel

123734432
1001-45: RNCC: 3 | RNVC: 2

5 Nov 2007

5110-25-100-4156
Hand File

5110-25-100-4161
Hand File

5110-34-031-2072
Handle

340312072
M/LV/GOMBA (GOMBA STONFIELD)-1: RNCC: 3 | RNVC: 2
M/LV/GOMBA (GOMBA STONFIELD)-1: RNCC: 6 | RNVC: 9

20 Feb 2004

5110-14-422-7440
Single Bow Cutting Punch

144227440
NO PRIMARY REF14-422-7440: RNCC: 3 | RNVC: 2
21A55: RNCC: 5 | RNVC: 2

17 Mar 1988

5110-25-106-1252
Double Bow Cutting Punch

251061252
NO PRIMARY REF25-106-1252: RNCC: 3 | RNVC: 2
1711-0602: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-15-208-8224
Fustella

152088224
3FANGRSE2: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-188-3377
Hand Operated Cable Cutter

151883377
148004: RNCC: 3 | RNVC: 2
148 N/17: RNCC: 5 | RNVC: 2
14749: RNCC: 5 | RNVC: 2
391129155602: RNCC: 6 | RNVC: 9

2 Sep 2009

5110-21-105-2374
Keyhole Saw

211052374
46-GP-4: RNCC: 3 | RNVC: 2
30: RNCC: 5 | RNVC: 2
K4: RNCC: 5 | RNVC: 2
1F115740: RNCC: 5 | RNVC: 2
15: RNCC: 5 | RNVC: 2
GGG-S-65: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-12-148-5984
Hand Reamer

121485984
NO PRIMARY REF 12-148-5984: RNCC: 3 | RNVC: 2
101309: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-122-2484
Hand Reamer

121222484
105.18.000: RNCC: 3 | RNVC: 2
105-18-000: RNCC: 5 | RNVC: 2
LISS: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-303-8645

5110-25-100-0846
Hand Reamer

5110-99-910-5655
Hollo Cutting Punch

999105655
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H21043: RNCC: 5 | RNVC: 2
DL9A: RNCC: 5 | RNVC: 9
DL9A-H2018: RNCC: 5 | RNVC: 9
F1FA16061: RNCC: 6 | RNVC: 9
H2018: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-841-7379
Hand Rasp

218417379
917683: RNCC: 3 | RNVC: 2
75-11708: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-98-202-5988
Pocket Scissors

982025988
261: RNCC: 3 | RNVC: 2

8 Sep 1988

5110-27-039-4825
Torna Kalemi

270394825
07002YK0258: RNCC: 2 | RNVC: 1

4 Dec 2007

5110-15-208-4767
Alesatore

152084767
3AAWFCFRDP12: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-134-3877
Tagliabullone

151343877
195202: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-99-120-7294
Hand Wire St Blades

991207294
H5992: RNCC: 2 | RNVC: 2

25 Apr 1991

5110-12-155-9463
Hand File

121559463
M464-202: RNCC: 3 | RNVC: 2
M464-202: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-149-7532
Hand File

661497532
NO PRIMARY REF 66-149-7532: RNCC: 3 | RNVC: 2
07092309: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-12-137-1213
Firmer Chisel

121371213
NO PRIMARY REF 12-137-1213: RNCC: 3 | RNVC: 2
B30HLDIN5141: RNCC: 5 | RNVC: 9
B30HLDIN5141MG: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-120-9978
Miter Box And Saw

121209978
NO PRIMARY REF 12-120-9978: RNCC: 3 | RNVC: 2
352: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-320-8379
Ladies' Scissors

123208379
763150-190: RNCC: 3 | RNVC: 2
763150-190: RNCC: 3 | RNVC: 2
250A-11-1103: RNCC: 5 | RNVC: 2
76315-190: RNCC: 5 | RNVC: 9
250A-11-1103: RNCC: 5 | RNVC: 9
76315-190: RNCC: 5 | RNVC: 9

21 Feb 1990

5110-15-133-3538
Cacciapunte Per Con

151333538
912-140: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-12-177-5818
Locheisen

121775818
6888-5X23: RNCC: 3 | RNVC: 9

7 Feb 1979

5110-66-135-4580
Plastic Sea Scraper

661354580
EX-12: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

5 Apr 1993

5110-15-230-0205
Lima Mezzatonda 10"

152300205
02M/10": RNCC: 3 | RNVC: 2
511015E005671: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-21-876-0449
Hand Metal Stamping Die Set

218760449
1-8: RNCC: 3 | RNVC: 1
5110-1859: RNCC: 6 | RNVC: 9

19 Jul 1977

5110-66-012-0766
Firmer Chisel

660120766
7 1-4IN X 2IN: RNCC: 3 | RNVC: 2
16-732: RNCC: 3 | RNVC: 2
16-146: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-99-910-5314
Circular Plane

999105314
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
H1709: RNCC: 6 | RNVC: 9
F1FA15570: RNCC: 6 | RNVC: 9
1B1722: RNCC: 6 | RNVC: 9
DL-9-A-H1709: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-123-2615
Pinza A Becchi Piat

151232615
1172P: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-165-3677
Scalpello X Legno L

151653677
827812: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-208-4778
Alesatore

152084778
3AAWFCFRDP20-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-215-1751
Morsetto 120X500

152151751
120X500: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-125-5769
Taglia Bullone Rego

151255769
998.A4: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-25-103-3325

5110-25-103-8626
Doubl Cutting Punch

5110-25-103-6952

5110-14-298-7826
A Monture Scie

142987826
NO PRIMARY REF14-298-7826: RNCC: 3 | RNVC: 2
258TM75-240: RNCC: 5 | RNVC: 2
258-75M: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-22-607-3779
File Handle

226073779
8193492: RNCC: 3 | RNVC: 2
9-485-06-10: RNCC: 3 | RNVC: 2
9-485-06-1P: RNCC: 3 | RNVC: 2
8193508: RNCC: 3 | RNVC: 2

11 Jun 2004

5110-12-148-6004
Reamer Blade Set

121486004
NO PRIMARY REF 12-148-6004: RNCC: 3 | RNVC: 2
101438: RNCC: 5 | RNVC: 9

30 May 1969

5110-13-102-8809
Hand File

131028809
NBN496A5-150B0: RNCC: 2 | RNVC: 2

1 Apr 1975

5110-15-208-4995
Scalpello

152084995
3SANFLSUZ30: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-13-113-9513
Craftsman's Knife

131139513
18: RNCC: 3 | RNVC: 2

19 Mar 1991

5110-21-639-6388
Razor Blade Glass Scraper

216396388
13: RNCC: 3 | RNVC: 2
3213: RNCC: 3 | RNVC: 2
3223: RNCC: 3 | RNVC: 2
27: RNCC: 3 | RNVC: 2
5110-1111: RNCC: 5 | RNVC: 9

20 Mar 1964

5110-21-905-9639
Scrapper

219059639
WW300840-X: RNCC: 3 | RNVC: 2

4 Mar 1989

5110-27-000-8059
Single Bow Cutting Punch

270008059
5700 24 0020: RNCC: 3 | RNVC: 2

11 Jun 1991

5110-27-004-3086
Hand Operated Cable Cutter

270043086
05001MP0032: RNCC: 3 | RNVC: 2

28 Aug 1995

5110-27-011-5426
Hand Reamer

270115426
10121MR0003: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-25-101-4626
Tailor's Shears

251014626
290MMLG: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-14-369-6978
Shave Hook Scraper

143696978
98.303.310: RNCC: 3 | RNVC: 9
B42: RNCC: 3 | RNVC: 9

17 Apr 1981

5110-27-000-7825
Diagonal Cutting Pliers

270007825
9.01.04.05: RNCC: 2 | RNVC: 1
5120-3616-0001: RNCC: 2 | RNVC: 1
5120-3616-0001: RNCC: 2 | RNVC: 1
3700 47 0160: RNCC: 3 | RNVC: 2
3700 47 160: RNCC: 5 | RNVC: 2
3700 47 0160: RNCC: 5 | RNVC: 9

11 Dec 2002

5110-12-364-8961
Hand Operated Cable Cutter

123648961
763050-190: RNCC: 3 | RNVC: 2
5-309: RNCC: 3 | RNVC: 2

12 Nov 2004

5110-12-166-9720
Wire Stripper Blade

121669720
2530L0-7-1-0: RNCC: 3 | RNVC: 2
106445: RNCC: 5 | RNVC: 2

6 Nov 1976

5110-12-126-2475
Craftsman's Knife

121262475
TL5110-0026: RNCC: 2 | RNVC: 2
JD5110-12-126-2475: RNCC: 5 | RNVC: 2
990077: RNCC: 5 | RNVC: 2
R2959/13-GEWELLTEN GRIFFSCHALEN: RNCC: 5 | RNVC: 9
TL5110-0014: RNCC: 5 | RNVC: 9
TK5110-008: RNCC: 5 | RNVC: 9
5110-014: RNCC: 5 | RNVC: 9
5110-0014: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-600-4352
Pliers

226004352
66921102: RNCC: 3 | RNVC: 2

27 Jun 2002

5110-14-490-8840
Alesoir

144908840
4067 010 000 308: RNCC: 3 | RNVC: 2
F300 0T 000 5112: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-14-268-6316

5110-66-019-7351
Hand Reamer

660197351
HAND REAMER: RNCC: 3 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5110-99-135-1607
Bolt Blade Assembly

991351607
H936F: RNCC: 3 | RNVC: 2
H6671: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-15-218-1871
Pistola Per Colla A

152181871
PLM40: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-5343
Pettine Filettare M

152085343
4PESDC5-5X0-90: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-138-1324
Paring Chisel

991381324
DEF STAN 51-11:PART 27-H7034: RNCC: 2 | RNVC: 2
H7034: RNCC: 3 | RNVC: 2
75392: RNCC: 5 | RNVC: 2
DEF STAN 51-11:PART 27: RNCC: 5 | RNVC: 2
H7034: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-549-4309
File Handle

995494309
NO PRIMARY REF 99-549-4309: RNCC: 3 | RNVC: 2
7311518193492: RNCC: 5 | RNVC: 2
9-485-06-1P: RNCC: 5 | RNVC: 2
020AO-005: RNCC: 6 | RNVC: 9

30 Jan 2002

5110-15-136-3677
Cesoia Ad Intaglio

151363677
5595-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-137-4395
Tagliavetri Ad Olio

151374395
4493 G: RNCC: 3 | RNVC: 2
4493 G: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-33-204-0168
Diagonal Cutting Pliers

332040168
5.267: RNCC: 3 | RNVC: 2

2 Feb 2005

5110-15-191-2867
Inseritore X Contat

151912867
DAK20: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-209-0807
Scalpelli Serie 3 P

152090807
72110: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-343-5982
Appareil A Rainurer

143435982
90007000: RNCC: 3 | RNVC: 2

16 Jun 1977

5110-22-617-8143
Wood Scraper

226178143
625: RNCC: 3 | RNVC: 2

28 Aug 2008

5110-15-143-4022
Spaccadadi Per Dadi

151434022
1889-1-24: RNCC: 3 | RNVC: 2
1889/1-24: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-15-125-9258
Raspa Con Manico Di

151259258
2659/1-12: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-174-5819
Breast Drill

121745819
7029-8: RNCC: 3 | RNVC: 2
7029.8: RNCC: 5 | RNVC: 2
10012: RNCC: 5 | RNVC: 9

13 Jul 1978

5110-15-218-2332
Tagliabalsa Piccolo

152182332
OLFA180: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-215-7778
Coltello Inox Nostr

152157778
2639: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-217-6290
Scalpello Cm. 1

152176290
SCALPELLOCM1: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-159-8247
Hand Reamer

661598247
TF02149-1: RNCC: 3 | RNVC: 2

24 Feb 2012

5110-21-848-1885
Hand Reamer

218481885
D500: RNCC: 3 | RNVC: 1
B174-2: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1
4500 13-64: RNCC: 5 | RNVC: 2

28 Nov 1967

5110-99-695-3534
Pocket Knife

996953534
8101034: RNCC: 3 | RNVC: 2
OPINEL NO.12 STAINLESS: RNCC: 5 | RNVC: 2
SSK12: RNCC: 5 | RNVC: 2

29 Dec 2009

5110-66-013-5561
Hand File

660135561
SQUAREFILE: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-25-100-4295

5110-21-639-4436
Hand File

216394436
905059: RNCC: 3 | RNVC: 2
39GP30: RNCC: 4 | RNVC: 1

30 May 1966

5110-99-428-7605
Chisel And Gouge Handle

994287605
BS1943: RNCC: 4 | RNVC: 1
F1FA14375: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-004-9144
Lama

150049144
63502097011: RNCC: 3 | RNVC: 2

9 Dec 2013

5110-12-177-3660
Hand Reamer

121773660
0276159002: RNCC: 3 | RNVC: 9

29 Jan 1979

5110-13-009-9039
Wood Scraper

130099039
NO PRIMARY REF 13-009-9039: RNCC: 3 | RNVC: 2
SL-BAF5110-751-500: RNCC: 5 | RNVC: 2

11 Dec 1975

5110-99-910-6441
Stencil Cut Die Set

999106441
NO PRIMARY REF 99-910-6441: RNCC: 3 | RNVC: 2
H2568: RNCC: 5 | RNVC: 2
FA17750: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-4833
Hand File

999104833
C00RDPATH756: RNCC: 2 | RNVC: 2
DEF1098: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-57-440-1961
Hand Metal Cutting Shears

574401961
8AT-9105-40: RNCC: 3 | RNVC: 2

3 Nov 2009

5110-16-006-6886
Hand Hacksaw Blade

160066886
CSN222950-18-HSS: RNCC: 2 | RNVC: 2
22 2950 HSS-18: RNCC: 3 | RNVC: 2
391239152507: RNCC: 6 | RNVC: 9

25 Aug 2011

5110-99-739-3241
End Cutting Nippers

997393241
7291"DS": RNCC: 3 | RNVC: 2
7291AS: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-639-4113
Hand File

216394113
88325: RNCC: 3 | RNVC: 1
88325-6: RNCC: 3 | RNVC: 2
GGGF325: RNCC: 4 | RNVC: 1
39GP30: RNCC: 4 | RNVC: 1
88325: RNCC: 5 | RNVC: 2
11-2930: RNCC: 5 | RNVC: 2
11-2930: RNCC: 5 | RNVC: 9
327005: RNCC: 5 | RNVC: 9
300P0F400BHSP: RNCC: 5 | RNVC: 9

25 May 1968

5110-22-607-3282
Hand File

226073282
1-170-10-1-0: RNCC: 3 | RNVC: 2
8020026: RNCC: 3 | RNVC: 2

8 Jun 2004

5110-12-177-7526
Verbindungsteil

121777526
745054: RNCC: 3 | RNVC: 9
745-4-5: RNCC: 5 | RNVC: 9

16 Feb 1979

5110-21-849-6672
Hand File

218496672
RDSM00THCHAINSAW: RNCC: 3 | RNVC: 1
39GP30: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-15-137-9556
Pinza Spelafili

151379556
1147024: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-230-4200
Rotelle Di Ricambio

152304200
6125: RNCC: 3 | RNVC: 2
511015E090649: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-21-899-4769
Pulling Bar

218994769
ZT2052-5/32: RNCC: 3 | RNVC: 2
ZT2052-5-32: RNCC: 5 | RNVC: 2

6 Aug 1985

5110-17-118-2285
Bolt Master Bolt Cu

171182285
DE-BM: RNCC: 3 | RNVC: 2

16 Jan 2006

5110-22-614-5665
Bow Saw

226145665
23-020762: RNCC: 3 | RNVC: 2

11 Dec 2006

5110-14-528-9314
Metal Cutting Hand Saw

145289314
225-S: RNCC: 3 | RNVC: 2
SYQ0854: RNCC: 5 | RNVC: 2
7311518006303: RNCC: 5 | RNVC: 2

26 Feb 2002

5110-14-257-7560

5110-14-569-2092
Pocket Folding Multi-Tool

145692092
S661V2600101: RNCC: 3 | RNVC: 2

23 Aug 2011

5110-66-039-2126
Valve Seat Cutter

660392126
144507: RNCC: 3 | RNVC: 2

23 Apr 1971

5110-12-126-1457
Hand Reamer

121261457
NO PRIMARY REF 12-126-1457: RNCC: 3 | RNVC: 2
20DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-27-010-6644
Hand File

270106644
99999-NIIN-DA0037085: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-98-106-1172
Reamer Blade Set

981061172
NO PRIMARY REF 98-106-1172: RNCC: 3 | RNVC: 2
B/57 BLADE SET: RNCC: 5 | RNVC: 2

8 Mar 1979

5110-12-309-0750
Hand File

123090750
2112163: RNCC: 3 | RNVC: 2
2401-160-3: RNCC: 3 | RNVC: 2
2112-160-3: RNCC: 5 | RNVC: 2

11 Dec 1986

5110-17-015-5850
Hand File

170155850
TVA5110-2-263-006-1.1.5: RNCC: 3 | RNVC: 2
TVA5110-2-263-006: RNCC: 5 | RNVC: 1
12300402: RNCC: 5 | RNVC: 2
1157: RNCC: 5 | RNVC: 9

17 Jun 1972

5110-12-345-9122
Hand Wire Stripper

123459122
3.324: RNCC: 3 | RNVC: 2

15 May 1998

5110-15-208-2654
Alesatore

152082654
3AACPERMFN45: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-13-108-5411
Rescue Knife

131085411
NO PRIMARY REF 13-108-5411: RNCC: 3 | RNVC: 2
0022703000026: RNCC: 5 | RNVC: 2

1 Apr 1975

5110-14-462-6887
Diagonal Cutting Pliers

144626887
171.20EL: RNCC: 3 | RNVC: 2
171-20EL: RNCC: 5 | RNVC: 2
3148511400005: RNCC: 5 | RNVC: 2
91743471: RNCC: 5 | RNVC: 2
0140000: RNCC: 5 | RNVC: 9

28 Apr 1993

5110-15-184-6943
Trapano

151846943
5DMNPTN2A10: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-140-1494
Hand Reamer

121401494
101.11.000: RNCC: 3 | RNVC: 2
101-11-000: RNCC: 5 | RNVC: 2
800-4HC: RNCC: 5 | RNVC: 2

30 May 1969

5110-21-905-9565
Wood File Handle

219059565
4-62R: RNCC: 3 | RNVC: 2

9 Feb 1989

5110-15-215-4025
Prolunga Inserti

152154025
390M0075: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-620-1015
Hand Metal Stamping Die

226201015
2255743: RNCC: 3 | RNVC: 2

14 Dec 2009

5110-15-209-9330
Forbice Lama Telefo

152099330
841254: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-023-0149

5110-22-613-6402
Ratchet Drill

226136402
73102: RNCC: 3 | RNVC: 2
4215895520: RNCC: 5 | RNVC: 2

6 Jul 2006

5110-21-896-7010
Hand File

218967010
911748: RNCC: 3 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

12 Aug 1984

5110-15-211-7954
Utensile X Troncatu

152117954
UTTRC16X10X110: RNCC: 5 | RNVC: 3
UTTRC16X10X110: RNCC: 5 | RNVC: 9

16 Nov 2005

5110-15-230-4043
Spatola Acciaio

152304043
6308/50: RNCC: 3 | RNVC: 2
511015E068585: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-21-637-5265
Hand Reamer

216375265
D500: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
4500: RNCC: 3 | RNVC: 1
50-10928: RNCC: 3 | RNVC: 2
50-10928: RNCC: 3 | RNVC: 2
B174-2: RNCC: 4 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1

28 Nov 1967

5110-99-910-5160
Turning Gouge

999105160
BS1943: RNCC: 4 | RNVC: 1
H1159: RNCC: 6 | RNVC: 9
WX1518: RNCC: 6 | RNVC: 9
9105160: RNCC: 6 | RNVC: 9
1C5277: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-475-9773
Hand Metal Stamping Die Set

144759773
400184: RNCC: 3 | RNVC: 2

17 May 1995

5110-12-341-9621
Craftsman's Knife

123419621
985303: RNCC: 3 | RNVC: 2
4003773026549: RNCC: 5 | RNVC: 2

21 Nov 1996

5110-14-318-2536

5110-14-271-5945

5110-12-336-7217
Straight Trimmers Shears

123367217
1071/C/7,75": RNCC: 3 | RNVC: 2
140 202 03 E401: RNCC: 5 | RNVC: 2

14 Dec 1994

5110-66-157-1323
Edge Cutting Trimming Tool

661571323
58146-E: RNCC: 3 | RNVC: 2
MC-163-009: RNCC: 5 | RNVC: 2

8 Aug 2008

5110-12-123-7060
Hand Hacksaw Frame

121237060
DIN6473-B: RNCC: 2 | RNVC: 2
BDIN6473: RNCC: 5 | RNVC: 2
4634: RNCC: 5 | RNVC: 9
DIN6473B: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-625-0742
Hand File

226250742
1-170-06-1-2: RNCC: 3 | RNVC: 2

8 Mar 2013

5110-21-860-7731
Tube Cutter

218607731
122: RNCC: 3 | RNVC: 2
5110-1205: RNCC: 6 | RNVC: 9

18 Feb 1971

5110-15-161-8281
Lama Per Seghetto B

151618281
1728010: RNCC: 3 | RNVC: 2

1 Oct 2000

5110-21-859-0063
Punch And Die S Die

218590063
730R2: RNCC: 3 | RNVC: 2

16 Apr 1970

5110-15-182-5640
Lima Abrasiva Tonda

151825640
D9737/1: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-340-3778
Hand Wire Stripper

123403778
3757-1: RNCC: 3 | RNVC: 2
49CSD00002652: RNCC: 5 | RNVC: 1
T3757 1: RNCC: 5 | RNVC: 2
330009: RNCC: 5 | RNVC: 9

2 Apr 1996

5110-12-329-8809
Hand Reamer

123298809
HSS012011-9: RNCC: 3 | RNVC: 2

8 Oct 1992

5110-99-138-2297
Masonry Drill Bit

991382297
02-108: RNCC: 3 | RNVC: 2
H7047: RNCC: 5 | RNVC: 2
8-14: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-17-120-4514
Hand Cable Stripper

171204514
985957: RNCC: 3 | RNVC: 2

11 May 2007

5110-99-942-0141
Hand Reamer

999420141
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
F1FA16329: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-17-701-5809
Hand File

177015809
12111000 NICHOLSON: RNCC: 3 | RNVC: 2

14 May 1970

5110-14-295-6801

5110-12-142-0258
Hand File

121420258
DIN7262-E300-3: RNCC: 2 | RNVC: 2
1212300: RNCC: 3 | RNVC: 2
1212-300-3: RNCC: 3 | RNVC: 2
E300-3DIN7262: RNCC: 5 | RNVC: 2
575B601-300X3: RNCC: 5 | RNVC: 9
DIN7262E300-3: RNCC: 5 | RNVC: 9

30 May 1969

5110-17-004-5768
Hand Reamer

170045768
BS122-2-1952TAB3 3-8IN: RNCC: 2 | RNVC: 2
BS122-2-1952TAB3 3-8IN: RNCC: 2 | RNVC: 9
BS122: RNCC: 5 | RNVC: 9

6 May 1968

5110-15-123-4415
Tronchese Mod.Svede

151234415
2216-160: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-25-125-8261
Awg26 Krympetang

251258261
20053: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-12-126-1204

5110-14-323-1814

5110-15-189-9042
Tronchesi Ceka

151899042
0660084: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-37-513-8927

5110-15-218-8345
Ricambio Per Taglie

152188345
YA1850: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-271-7278
Manche Hachot Bois

142717278
13-86HACH0T: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-21-639-4434
Hand File

216394434
904861: RNCC: 3 | RNVC: 2
39GP30: RNCC: 4 | RNVC: 1

30 May 1966

5110-15-208-4640
Fustella

152084640
3FANGRF06: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-192-5625
Scalpello Piatto Co

151925625
MM250PIATTO: RNCC: 3 | RNVC: 2

26 Mar 2010

5110-99-135-7463

5110-99-135-7466

5110-99-826-9472
Thread Restore File

5110-15-208-4537
Alesatore

152084537
3AARPERMDQ16-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-989-6174
Pocket Scissors

999896174
GQD41649: RNCC: 3 | RNVC: 2
18902483-9: RNCC: 5 | RNVC: 2

3 Apr 2002

5110-15-208-5313
Lima Per Sega A Tri

152085313
3LSETRBTCNN200: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-143-4030
Lima Mezzodolce Pia

151434030
2619/2-14: RNCC: 3 | RNVC: 2
2619-2-14: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-21-840-0086
Diagonal Cutting Pliers

218400086
S55KS: RNCC: 3 | RNVC: 2
CCG101: RNCC: 3 | RNVC: 2
19541FS: RNCC: 5 | RNVC: 2
S55-5RP: RNCC: 5 | RNVC: 9
S55RGP: RNCC: 5 | RNVC: 9
95CG: RNCC: 5 | RNVC: 9

26 Mar 1965

5110-15-123-1603
Levachiodi X Uso A

151231603
3594-320: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-120-6035
File Handle

121206035
DIN395-120: RNCC: 2 | RNVC: 2
51582120: RNCC: 3 | RNVC: 2
395-120: RNCC: 3 | RNVC: 2
01.79.92.47: RNCC: 5 | RNVC: 2
575C004-32: RNCC: 5 | RNVC: 9
120DIN395: RNCC: 5 | RNVC: 9
5180-0204-22-1: RNCC: 5 | RNVC: 9
5180-204-22-1: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-123-7683
I Stampi Traforati

151237683
3679-2-20: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-120-6192
Brick Chisel

121206192
51264530: RNCC: 3 | RNVC: 2
DIN7254-B400: RNCC: 4 | RNVC: 1
30146: RNCC: 5 | RNVC: 9
574B102-400X20: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-216-1089
Hand Hacksaw Blade

992161089
KT-103-124: RNCC: 3 | RNVC: 2

27 Jun 2012

5110-99-896-0418

5110-15-184-8036
Coltello

151848036
NSN511015R574135: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-219-4629
Svasatore 3 Tagl.Ci

152194629
0208708: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-842-8659
Hand Reamer

218428659
B174-2: RNCC: 3 | RNVC: 1
1612: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
50-10950: RNCC: 3 | RNVC: 2
GGGR180: RNCC: 4 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1
4500 7-8: RNCC: 5 | RNVC: 2
8R5309: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-12-122-2546
Hand Reamer

121222546
2: RNCC: 3 | RNVC: 2

30 May 1969

5110-15-216-5124
Scalpello A Punta P

152165124
SCALPUNTAMARTPERF: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-471-8899
Hand Operated Wire Rope Cutter

144718899
332A07-23-841: RNCC: 3 | RNVC: 2

21 Sep 1994

5110-99-762-9008
End Cutting Nippers

997629008
NO PRIMARY REF 99-762-9008: RNCC: 3 | RNVC: 2
5013969684407: RNCC: 5 | RNVC: 2
3761: RNCC: 5 | RNVC: 2
CK3761: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-27-010-6621
Hand File

270106621
99999-NIIN-DA0037200: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-139-8354
Raspa Mezzatonda

151398354
2442B/10: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-004-9290
Adattatore Per Rive

150049290
AT108AR3/32: RNCC: 3 | RNVC: 2

9 Dec 2013

5110-14-262-8128
Tariere Torse A Vis

142628128
12-4-32: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-337-5397
Appareil A Rainurer

143375397
90007011: RNCC: 3 | RNVC: 2

7 Oct 1976

5110-33-158-4994
Firmer Chisel

331584994
119.128: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-12-333-7669
Hand Valve Seat Rotary Tool

123337669
NO PRIMARY REF 12-333-7669: RNCC: 3 | RNVC: 2
651: RNCC: 5 | RNVC: 9

3 Feb 1994

5110-14-325-3425

5110-99-380-7040
Inst'n Reversion Ki

993807040
FV2258048: RNCC: 3 | RNVC: 2

5 Oct 2009

5110-12-341-2573
Paper Cutter

123412573
4104: RNCC: 3 | RNVC: 2
RAB9206: RNCC: 5 | RNVC: 2
MINI CUT: RNCC: 5 | RNVC: 2
4104: RNCC: 5 | RNVC: 2

14 Aug 1996

5110-15-134-4039
Estrattore

151344039
460: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-22-303-5294

5110-27-038-3999
Maket Bicagi

270383999
S150: RNCC: 2 | RNVC: 1
9X80MM MAKET: RNCC: 2 | RNVC: 1

5 Oct 2007

5110-15-208-5330
Pettine Filettare M

152085330
4PESDC4-5X0-75: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-136-3154
Tronchese Con Tagli

151363154
9082-140: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-190-0127
Punzone Da 3 Mm

151900127
000300030: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-125-4580
Scalpello Ad Ugnett

151254580
37-200: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-22-620-7228
Rivet Cutter

226207228
HND-105: RNCC: 3 | RNVC: 2
10000148320: RNCC: 5 | RNVC: 2

20 May 2010

5110-17-029-6916
Hand Reamer

170296916
K21-24: RNCC: 3 | RNVC: 2
K21-24: RNCC: 5 | RNVC: 9
K21T0T24: RNCC: 6 | RNVC: 9
K21-24: RNCC: 6 | RNVC: 9

15 May 1970

5110-22-222-3913

5110-15-208-4583
Alesatore

152084583
3AANFCFMEQ20: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-220-9943
Estrattore Per Anel

152209943
120630: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-337-5399

5110-34-037-6702
Fl Hand Cold Chisel

340376702
22203295: RNCC: 5 | RNVC: 2

2 Oct 2009

5110-15-175-7324
Scalpello Tagliente

151757324
35-300: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-176-2474
Lettere E Numeri Di

151762474
NU/LT-PB98: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-99-910-4033
Adze Head

999104033
A1-9532: RNCC: 3 | RNVC: 2
H1: RNCC: 6 | RNVC: 9
FA10001: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-150-0886
Crosscut Hand Saw

661500886
NO PRIMARY REF 66-150-0886: RNCC: 3 | RNVC: 2
07495207: RNCC: 5 | RNVC: 2

14 Apr 2003

5110-12-126-3227
Craftsman's Knife

121263227
3959: RNCC: 3 | RNVC: 2

30 May 1969

5110-14-490-8831
Alesoir

144908831
4067 010 000 294: RNCC: 3 | RNVC: 2
F300 0T 000 5103: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-14-489-5803
Hand Metal Stamping Die

144895803
SIGLE SEA+EXP+O.M: RNCC: 3 | RNVC: 2

6 Aug 1997

5110-12-189-1793
Bearing Scraper

121891793
52810101: RNCC: 3 | RNVC: 2
72050001: RNCC: 5 | RNVC: 9
10672-1: RNCC: 5 | RNVC: 9

8 Sep 1981

5110-15-136-2138
Lama Speciale Per C

151362138
5304-2: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-14-266-7005

5110-14-389-8765

5110-12-373-3864
Hand File

123733864
COR800200MMH0: RNCC: 3 | RNVC: 2
COR800-200-0: RNCC: 5 | RNVC: 2
01.79.15.67: RNCC: 5 | RNVC: 2
4007220304112: RNCC: 5 | RNVC: 2

26 Oct 2007

5110-98-104-4975

5110-66-131-2294
Hand Operated Wire Rope Cutter

661312294
C9: RNCC: 3 | RNVC: 2

29 Jul 1988

5110-21-639-4896
Hand File

216394896
39GP53: RNCC: 4 | RNVC: 1

29 Oct 1963

5110-15-176-9227
Lima Tonda

151769227
1719T: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-98-107-5963
Hand File

981075963
200MM,MILSAW,SMOOTH: RNCC: 5 | RNVC: 9

4 Nov 1983

5110-25-138-5934
Paper Cutter

251385934
GULVMODELL: RNCC: 5 | RNVC: 2

2 May 1990

5110-15-165-3674
Legno Sen Scalpello

151653674
82704: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-665-5443
Scissors

996655443
SGE1000B12: RNCC: 3 | RNVC: 2

2 Feb 2002

5110-14-205-5251

5110-21-639-4279
Hand File

216394279
39GP30: RNCC: 4 | RNVC: 1

16 Aug 1967

5110-15-138-0694
Tronchese Per Elett

151380694
036001: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-215-9911
Bacinella Raccolta

152159911
BACINELLA: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-566-3317
Hand Metal Cutting Shears

145663317
150.182.060: RNCC: 3 | RNVC: 2
1737087: RNCC: 5 | RNVC: 2

8 Nov 2010

5110-12-385-2784
Oval Cutting Punch

123852784
50.000.109: RNCC: 3 | RNVC: 2

17 May 2011

5110-15-174-6036
Serie Lime Di Preci

151746036
991022: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-22-610-0121
End Cutting Nippers

226100121
EREM570E: RNCC: 3 | RNVC: 2

22 Mar 2005

5110-12-126-2190
Hand Metal Stamping Die Set

121262190
DIN7353-SATZARAB-10: RNCC: 2 | RNVC: 2
36810: RNCC: 3 | RNVC: 2
695 941 61: RNCC: 3 | RNVC: 2
330-10: RNCC: 3 | RNVC: 2
330010: RNCC: 5 | RNVC: 2
SZFDIN7353ENG10DIN1451: RNCC: 5 | RNVC: 9
DIN7353-SATZARAB10: RNCC: 5 | RNVC: 9
DIN7353SATZARAB10: RNCC: 5 | RNVC: 9
SATZARAB10DIN7353: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-139-9658
Hand Reamer

991399658
NO PRIMARY REF 99-139-9658: RNCC: 3 | RNVC: 2
METR1C2050-2MMD1A: RNCC: 5 | RNVC: 2
1G830: RNCC: 6 | RNVC: 9
7050-2M: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-158-2989
Shouldered Punch

661582989
502AMR288-6: RNCC: 3 | RNVC: 2
502AMR288-6: RNCC: 5 | RNVC: 2

29 Oct 2009

5110-21-105-0050
Punch And Die S Die

211050050
2: RNCC: 3 | RNVC: 1
310080484: RNCC: 3 | RNVC: 2
1F27: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-15-137-5534
Pinza Spelafili

151375534
663-617: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-66-150-4059
Tube Cutter Cutting Wheel

661504059
NO PRIMARY REF 66-150-4059: RNCC: 3 | RNVC: 2
00464109: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-15-123-2861
Scalpelllo Per Piet

151232861
4984-400: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-908-2355
Craftsman's Knife

999082355
NO PRIMARY REF 99-908-2355: RNCC: 3 | RNVC: 2
GRC-011466-FP: RNCC: 5 | RNVC: 2
T0956-1: RNCC: 5 | RNVC: 2

20 Apr 2009

5110-25-109-5310

5110-15-134-3917
Tronchese Tele Radi

151343917
559G: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-12-385-2906
Ladies' Scissors

123852906
50.000.078: RNCC: 3 | RNVC: 2

18 May 2011

5110-15-123-2827
Tenaglia Per Cament

151232827
1192-250: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-220-6920
Tagliavetro

152206920
TAGLIAVETRO1: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-25-101-5765

5110-15-165-3815
Lima Per Meccanica

151653815
256534: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-271-6958
Contre Fer De Rabot

5110-12-131-6994
Drehwerkzeug Pilot

121316994
300-11: RNCC: 3 | RNVC: 2

30 May 1969

5110-66-150-2143
Hand Hacksaw Blade

661502143
NO PRIMARY REF 66-150-2143: RNCC: 3 | RNVC: 2
09783713: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-22-606-4594
End Cutting Nippers

226064594
527D-200: RNCC: 3 | RNVC: 2
327-0779: RNCC: 5 | RNVC: 2
7314150032730: RNCC: 5 | RNVC: 9

16 Feb 2004

5110-25-120-0767
Craftsman's Knife

251200767
KS8F: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-15-165-3914
Utensile Da Tornio

151653914
777168: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-230-5571
Lame Di Ricambio Pe

152305571
511015E082083: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-14-244-0709

5110-12-369-4726
Finger Grip Hand Saw

123694726
HW651000: RNCC: 3 | RNVC: 2

7 Jul 2006

5110-12-320-6618
Hand Operated Cable Cutter

123206618
TL5110-0039-003: RNCC: 2 | RNVC: 2
61451006: RNCC: 3 | RNVC: 2
9531280: RNCC: 3 | RNVC: 2
4003773043942: RNCC: 5 | RNVC: 2
731100-52: RNCC: 5 | RNVC: 2
73110-52: RNCC: 5 | RNVC: 9

5 Feb 1990

5110-15-132-6899
Sega Per Metallo

151326899
2509G16-25-400: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-14-443-9418
Hand Metal Cutting Shears

144439418
GS-176: RNCC: 3 | RNVC: 2

13 Dec 1990

5110-25-132-3988
Hand Metal Cutting Shears

251323988
884-65: RNCC: 3 | RNVC: 2
660MM LG: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-99-601-0892
Hand Reamer

5110-99-203-1313

5110-25-118-0313

5110-21-809-1604

5110-12-350-3202
Hand Reamer

123503202
102: RNCC: 3 | RNVC: 2

15 Mar 2000

5110-26-300-7879
Cable Saw

263007879
SC12: RNCC: 3 | RNVC: 2

4 Nov 2009

5110-19-004-2077
Hand File

190042077
11916: RNCC: 3 | RNVC: 2

3 Nov 2010

5110-99-465-9908

5110-99-465-4020

5110-15-212-7259
Sega A Tazza Con De

152127259
HM7008-70: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-98-205-8815
Hand Cold Chisel

982058815
DFAMPD03102: RNCC: 2 | RNVC: 2

20 May 2003

5110-21-893-0837
Hand Graver

218930837
36-555-1: RNCC: 3 | RNVC: 2
GR-600-55: RNCC: 3 | RNVC: 2
36-555: RNCC: 5 | RNVC: 2
25-535-55: RNCC: 5 | RNVC: 9

21 Mar 1983

5110-14-305-6054

5110-15-137-8310
Tronchese A Taglien

151378310
1818/1-180: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-21-885-2570
Pipe Cutter Cutting Wheel

218852570
H16: RNCC: 3 | RNVC: 2

28 Jul 1981

5110-66-015-3523
Edge Cutting Trimming Tool

660153523
CES10395: RNCC: 3 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5110-21-901-6943
Riffler

219016943
STYLE2: RNCC: 3 | RNVC: 1
941000: RNCC: 5 | RNVC: 2

4 Mar 1987

5110-98-852-5142
Tube Cutter

988525142
127-FB: RNCC: 3 | RNVC: 2
T34: RNCC: 5 | RNVC: 2

12 Jul 1977

5110-25-133-4664
Hand Cable Stripper

251334664
CX301: RNCC: 3 | RNVC: 2
COREX: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-15-002-4645
Retention Jaws

150024645
CBC-10-14F: RNCC: 3 | RNVC: 2

29 Aug 2013

5110-66-150-2257
Ladies' Scissors

661502257
NO PRIMARY REF 66-150-2257: RNCC: 3 | RNVC: 2
07620409: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-15-202-2161
Pinzatrice

152022161
OMP-POT-075: RNCC: 3 | RNVC: 2
(241)AE591OMP-POT-075: RNCC: 5 | RNVC: 2
511015E152005: RNCC: 5 | RNVC: 9
5110-15-E15-2005: RNCC: 5 | RNVC: 9

11 Feb 2007

5110-66-150-4058
Tube Cutter Cutting Wheel

661504058
NO PRIMARY REF 66-150-4058: RNCC: 3 | RNVC: 2
07612307: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-66-150-3143
Tube Cutter

661503143
NO PRIMARY REF 66-150-3143: RNCC: 3 | RNVC: 2
07612103: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-17-701-5699
Hand Rasp

177015699
NO PRIMARY REF 17-701-5699: RNCC: 3 | RNVC: 2

15 May 1970

5110-12-155-9743
Double Bow Cutting Punch

121559743
DIN7200-A23: RNCC: 2 | RNVC: 2
0100230: RNCC: 3 | RNVC: 2
A23DIN7200: RNCC: 5 | RNVC: 2
00.09.08.35: RNCC: 5 | RNVC: 2
DIN7200A23: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-121-4343
Firmer Chisel

121214343
NO PRIMARY REF 12-121-4343: RNCC: 3 | RNVC: 2
B14HLDIN5141: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-126-3070
End Cutting Nippers

121263070
DIN5243-140H-GERAUHT: RNCC: 2 | RNVC: 2
140HDIN5243-GERAUHT: RNCC: 5 | RNVC: 2

30 May 1969

5110-99-581-0590
Hand Reamer

995810590
WD01-10-90013WWS66G: RNCC: 3 | RNVC: 2

6 Mar 1997

5110-13-113-9906
Craftsman's Knife

131139906
10A: RNCC: 3 | RNVC: 2

25 Jun 1991

5110-15-213-6665
Kit Montaggio Inser

152136665
SRM0305W: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-101-2173
Coltello Da Elettri

151012173
216: RNCC: 3 | RNVC: 2
216: RNCC: 3 | RNVC: 2
464899117: RNCC: 5 | RNVC: 2

5 Feb 2004

5110-99-814-4797
Piston Ring Groove Reconditioning Tool

998144797
MBEU119356: RNCC: 3 | RNVC: 2

19 May 2011

5110-99-792-3099
Tube Cutter

997923099
TS NIP: RNCC: 3 | RNVC: 2

12 Feb 1999

5110-99-842-1846
Bolt Cutter

998421846
111410: RNCC: 3 | RNVC: 2
2977002: RNCC: 5 | RNVC: 2
FK9706W0106: RNCC: 6 | RNVC: 9

4 Feb 1998

5110-22-601-3502
Ship Scraper

25 Sep 2002

5110-12-316-9098
Hand Operated Cable Cutter

123169098
2155A: RNCC: 3 | RNVC: 9
53190010: RNCC: 3 | RNVC: 9

22 Feb 1989

5110-14-400-6875
Tube Decoupe Joint

144006875
DEC0UPE J0INT LISSE 44MM: RNCC: 3 | RNVC: 2

8 May 1985

5110-98-205-4742
Rip Hand Saw

982054742
DFAMPD00192: RNCC: 2 | RNVC: 2

11 Oct 2000

5110-21-104-9519
Bucksaw Blade

211049519
430: RNCC: 3 | RNVC: 1
409: RNCC: 3 | RNVC: 1
1F115990: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-21-870-0840
Floor Scraper

218700840
NO PRIMARY REF 21-870-0840: RNCC: 3 | RNVC: 2

16 Aug 1973

5110-21-889-5775
Wire Stripper Blade

218895775
GA116-2W-I: RNCC: 3 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

4 Jul 1982

5110-25-148-6509
Craftsman's Knife

251486509
NO PRIMARY REF25-148-6509: RNCC: 3 | RNVC: 2
SBP22-SPES.STYRK-0152: RNCC: 5 | RNVC: 2
SBP22SPESSTYRK0152: RNCC: 5 | RNVC: 2

8 Jun 2000

5110-37-519-4417
Steel Strapping Cutter

375194417
DAS-200: RNCC: 3 | RNVC: 2

16 Apr 2010

5110-98-106-1175
Reamer Blade Set

981061175
NO PRIMARY REF 98-106-1175: RNCC: 3 | RNVC: 2
F1/FA 16187: RNCC: 5 | RNVC: 2

9 Mar 1979

5110-14-488-4868
Ciseaux

144884868
841.CE: RNCC: 3 | RNVC: 2
3148515446405: RNCC: 5 | RNVC: 2
841-CE: RNCC: 5 | RNVC: 2
0544640: RNCC: 5 | RNVC: 9

14 May 1997

5110-14-200-7114
Pliers

142007114
E73-103: RNCC: 2 | RNVC: 2
8280-210: RNCC: 3 | RNVC: 2
E77001-22: RNCC: 5 | RNVC: 2
8280-210: RNCC: 5 | RNVC: 9
8280-210: RNCC: 5 | RNVC: 9
MAN8280-210: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-27-010-6538
Hand File

270106538
99999-NIIN-DA0037273: RNCC: 2 | RNVC: 1

20 Jun 2002

5110-66-150-5210
Knife Blade

661505210
NO PRIMARY REF 66-150-5210: RNCC: 3 | RNVC: 2
07196603: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-12-126-3246
Hand File Set

121263246
NO PRIMARY REF 12-126-3246: RNCC: 3 | RNVC: 2
50X3DIN8342: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-126-3072
Ratchet Bit Brace

121263072
TL5110-0034: RNCC: 2 | RNVC: 2
326050: RNCC: 3 | RNVC: 9
65118001: RNCC: 5 | RNVC: 9
51891010: RNCC: 5 | RNVC: 9
57610010: RNCC: 5 | RNVC: 9
577C009: RNCC: 5 | RNVC: 9

30 May 1969

5110-25-102-3777
Hand File

5110-14-244-3670

5110-15-123-6407
Lima Fresatrice Con

151236407
2612/2-12: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-169-6638
Spazzola Acc.

151696638
F72017667: RNCC: 3 | RNVC: 2

5 Nov 2002

5110-12-167-6914
Hand File

121676914
DIN7261-G200-1: RNCC: 2 | RNVC: 2
3172201: RNCC: 3 | RNVC: 2
1172-200-1: RNCC: 3 | RNVC: 2
1172W-200-1: RNCC: 5 | RNVC: 2
DIN7261-G200: RNCC: 5 | RNVC: 9
DIN7261G200: RNCC: 5 | RNVC: 9
G200-1DIN7261: RNCC: 5 | RNVC: 9

12 Jan 1977

5110-12-300-8648
Hand File

123008648
2113162: RNCC: 3 | RNVC: 2
2416-160-2: RNCC: 3 | RNVC: 2
2-312-16-2-0: RNCC: 3 | RNVC: 2
2113-160-2: RNCC: 5 | RNVC: 2

5 Sep 1984

5110-12-126-1481
Hand Reamer

121261481
DIN9-A3: RNCC: 2 | RNVC: 2
501-A3: RNCC: 3 | RNVC: 2
F3317-3,0: RNCC: 3 | RNVC: 2
501-FORM A-3,0: RNCC: 5 | RNVC: 2
A3DIN9: RNCC: 5 | RNVC: 9
DIN9A3: RNCC: 5 | RNVC: 9
513E204HSS3: RNCC: 5 | RNVC: 9
3DIN9SCHNELLARBEITSSTAHL: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-126-4805
Miter Box And Saw

121264805
NO PRIMARY REF 12-126-4805: RNCC: 3 | RNVC: 2
354: RNCC: 5 | RNVC: 9
354L UND288SW: RNCC: 5 | RNVC: 9
5110-10170: RNCC: 6 | RNVC: 9

30 May 1969

5110-27-010-6648
Hand File

270106648
99999-NIIN-DA0037239: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-21-806-0389
Hand Cable Stripper

218060389
1X: RNCC: 3 | RNVC: 1
SHEATHMASTER3-8IN: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-14-335-6831
Hand Metal Stamping Die Set

143356831
1-20-09-025: RNCC: 3 | RNVC: 2

30 Jun 1976

5110-99-556-8801
Exhaus Grindin Gear

995568801
Y25860-5: RNCC: 3 | RNVC: 2
280-240864: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-27-011-1888
Hand Reamer

270111888
07002YR0061: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-21-906-2647
Ladies' Scissors

219062647
C 5752 183-D: RNCC: 3 | RNVC: 2

6 Nov 1991

5110-15-152-3235
Electricians' Scissors

151523235
FORBICI ACCIAIO INOX LG.MM 150: RNCC: 3 | RNVC: 2

6 Oct 2000

5110-15-216-1702
Filiera 11X1

152161702
SKF11X1: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-859-0074
Punch And Die Punch

218590074
730R23: RNCC: 3 | RNVC: 2

16 Apr 1970

5110-14-505-2711
Cable Stripper Blade

145052711
421027: RNCC: 3 | RNVC: 2

17 Mar 1998

5110-14-244-0755

5110-27-010-6627
Hand File

270106627
99999-NIIN-DA0037198: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-12-368-8639
End Cutting Nippers

123688639
69 01 130: RNCC: 3 | RNVC: 2
00.12.90.29: RNCC: 5 | RNVC: 2
4003773-017974: RNCC: 5 | RNVC: 2

2 May 2006

5110-15-165-4220
Lima Per Meccanica

151654220
2566310: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-17-121-0564
Mes

171210564
KAPMES.MACHETE: RNCC: 3 | RNVC: 2

1 Feb 2008

5110-21-885-1954
Hand Wire Stripper

218851954
WS49: RNCC: 3 | RNVC: 2
WS49: RNCC: 5 | RNVC: 2

5 May 1981

5110-21-870-2438

5110-15-165-3698
Lima Piatta Lung.8'

151653698
260028: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-393-9271
A Main Lime

5110-99-143-2929

5110-15-123-2255
Pinza Spelafili

151232255
147I: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-208-5302
Lima

152085302
3LCNC0CND0N350: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-189-9293
Mini Lime Con Impug

151899293
HBF4T: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-208-4829
Alesatore Cilindric

152084829
3AAXFCFRDP9: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-876-0369
Double Bow Cutting Punch

218760369
1082-1/4 INCH: RNCC: 3 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9
1082: RNCC: 6 | RNVC: 9

6 Sep 1977

5110-99-863-1404
Hand Reamer

998631404
R-6Y-205/7: RNCC: 3 | RNVC: 2
26DL-96109: RNCC: 6 | RNVC: 9

20 Jun 2002

5110-22-607-3267
Hand File

226073267
1-210-04-3-0: RNCC: 3 | RNVC: 2
8020095: RNCC: 3 | RNVC: 2

8 Jun 2004

5110-27-027-3501
Hand Reamer

270273501
1.HIBM-2A-2561T01: RNCC: 2 | RNVC: 1

27 Sep 2005

5110-99-910-5016
Hand File

999105016
COORDPATH4056: RNCC: 2 | RNVC: 2
H20923: RNCC: 5 | RNVC: 2
DEFSTAN51-11PT6: RNCC: 6 | RNVC: 9
SAN SN162: RNCC: 6 | RNVC: 9
FA13434: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-309-3549
Hand Reamer

123093549
DIN206-B5,9H11-HSS: RNCC: 2 | RNVC: 2

19 Jan 1987

5110-14-573-3589
Hand Cold Chisel

145733589
NO PRIMARY REF 14-573-3589: RNCC: 3 | RNVC: 2
5926: RNCC: 5 | RNVC: 2

8 Oct 2012

5110-99-910-4869
Hand File

999104869
BS498: RNCC: 4 | RNVC: 1
H01012: RNCC: 5 | RNVC: 2
DEF1098: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 5: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-363-4879
Hand Reamer

123634879
130.15.000: RNCC: 3 | RNVC: 2
130-15-000: RNCC: 5 | RNVC: 2
U15,5-18: RNCC: 5 | RNVC: 9

18 Jun 2004

5110-66-149-7503
Hand File

661497503
NO PRIMARY REF 66-149-7503: RNCC: 3 | RNVC: 2
07096703: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-15-190-0128
Punzone Da 4 Mm

151900128
000300040: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-99-432-8780

5110-99-432-8916

5110-99-432-8759

5110-14-514-9618
Hand Optical Fiber Stripper

145149618
CT450360: RNCC: 3 | RNVC: 2

23 Jun 1999

5110-33-156-4501
Diagonal Cutting Pliers

331564501
006.450: RNCC: 3 | RNVC: 2

18 Mar 1994

5110-27-000-8057
Single Bow Cutting Punch

270008057
5700 24 0018: RNCC: 3 | RNVC: 2

11 Jun 1991

Load More Results