What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 101 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 101of 112

5110-21-637-4324
Hand Masonry Drill

216374324
1235-8: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-12-700-6683
Single Bit Ax Handle

127006683
4209387: RNCC: 3 | RNVC: 2
STIEL F. AXT A: RNCC: 5 | RNVC: 9

6 Oct 1992

5110-25-145-8562
Hand Reamer

251458562
905249000: RNCC: 3 | RNVC: 2

20 Nov 1995

5110-66-017-2406
Hand File

660172406
904828: RNCC: 3 | RNVC: 2
HALFR0UNDFILE: RNCC: 5 | RNVC: 1
07077104: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-15-165-4227
Coltello In Cu-Be

151654227
0751800: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-466-1367
Hand Reamer

994661367
BS122 PART 2: RNCC: 4 | RNVC: 1
1G520: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-807-1080
Hand Metal Stamping Die Set

218071080
101: RNCC: 3 | RNVC: 1
1550: RNCC: 3 | RNVC: 1
GGGD280: RNCC: 4 | RNVC: 1

5 Feb 1964

5110-15-184-7330
Ferro Per Sponderuo

151847330
3IANSRSQ16: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-21-886-7129
Dimpling Punch

218867129
ZT1751-5/32: RNCC: 3 | RNVC: 2
ZT1751-5-32: RNCC: 5 | RNVC: 2

9 Nov 1981

5110-15-189-6074
Fustella

151896074
3081-10: RNCC: 3 | RNVC: 2

26 Feb 2010

5110-17-026-8990
Hand File

170268990
TVA5110-2-263-007.1.1.3: RNCC: 3 | RNVC: 2
TVA5110-2-263-007: RNCC: 5 | RNVC: 1

17 Jun 1972

5110-99-257-9580
Smooth File

992579580
NO PRIMARY REF 99-257-9580: RNCC: 3 | RNVC: 2
37-50042: RNCC: 5 | RNVC: 2

11 Dec 1995

5110-15-136-3893
Scalpello

151363893
7250-150: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-21-851-2311
Firmer Gouge

218512311
MS16549-3: RNCC: 2 | RNVC: 2
330: RNCC: 3 | RNVC: 1
GGGC311: RNCC: 4 | RNVC: 1
83: RNCC: 5 | RNVC: 2
5110-0737: RNCC: 6 | RNVC: 9

6 Oct 1968

5110-12-126-1342
Plane Cutter Bit

121261342
DIN7372-D27-5S1: RNCC: 2 | RNVC: 2
D27-5S1DIN7372: RNCC: 5 | RNVC: 2
DIN7372D27-5S1: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-637-5415
Hand Reamer

216375415
B174-2: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
712-049212: RNCC: 3 | RNVC: 2
B5-14: RNCC: 4 | RNVC: 1
50-10967: RNCC: 5 | RNVC: 9

4 Jun 1968

5110-14-286-0259
Single Bow Cutting Punch

142860259
231-0-101-120: RNCC: 3 | RNVC: 2

1 Jan 1972

5110-21-807-1167

5110-14-488-3043
Hand Metal Stamping Die Set

144883043
293A.3: RNCC: 3 | RNVC: 2
293A-3: RNCC: 5 | RNVC: 2
0166338: RNCC: 5 | RNVC: 2
293A3: RNCC: 5 | RNVC: 2
3148511663387: RNCC: 5 | RNVC: 2
F300 0T 022 2814: RNCC: 6 | RNVC: 9

29 Apr 1997

5110-14-336-2629
Scie A Meta Monture

5110-21-639-4840
Hand File

216394840
3: RNCC: 3 | RNVC: 1
39GP53: RNCC: 4 | RNVC: 1

29 Oct 1963

5110-15-208-7708
Tenaglie

152087708
4TAGFLCNCN180: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-870-0783
Jacket Trim Jig

218700783
KTJ24: RNCC: 3 | RNVC: 2

16 Aug 1973

5110-21-759-0008

5110-21-807-1142

5110-14-348-4575
Thread Restorer File

143484575
NO PRIMARY REF14-348-4575: RNCC: 3 | RNVC: 2
77-06: RNCC: 5 | RNVC: 9

29 Mar 1978

5110-14-384-4936
Diagonal Cutting Pliers

143844936
NO PRIMARY REF14-384-4936: RNCC: 3 | RNVC: 2
0175910: RNCC: 5 | RNVC: 2
427: RNCC: 5 | RNVC: 2
175910427: RNCC: 5 | RNVC: 2
0221359M00: RNCC: 5 | RNVC: 2

4 May 1983

5110-15-218-2359
Spazzola A Tazza Co

152182359
TBU5010/6: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-126-2187
Hand Metal Stamping Die Set

121262187
DIN7353SATZARAB-3: RNCC: 2 | RNVC: 2
330003: RNCC: 3 | RNVC: 2
36803: RNCC: 3 | RNVC: 2
330-3: RNCC: 5 | RNVC: 2
DIN7353SATZARAB3: RNCC: 5 | RNVC: 9
SATZARAB3DIN7353: RNCC: 5 | RNVC: 9
SZFDIN7353ENG3DIN1451: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-368-4651

5110-14-298-9264

5110-12-386-2795
Straight Trimmers Shears

123862795
50.000.094: RNCC: 3 | RNVC: 2

22 Aug 2011

5110-14-248-5517

5110-15-208-3156
Alesatore

152083156
3AAXFCFRDP13-75: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-199-1009
Diagonal Cutting Pliers

151991009
1818/1-200: RNCC: 3 | RNVC: 2
B1818/1-200: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-98-200-9278
Reamer Blade Set

982009278
NO PRIMARY REF 98-200-9278: RNCC: 3 | RNVC: 2
ST 8: RNCC: 5 | RNVC: 2

20 Feb 1987

5110-99-910-4864
Hand File

999104864
DEF1098A: RNCC: 4 | RNVC: 1
H01022: RNCC: 5 | RNVC: 2
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-98-205-4751
Hand Reamer

982054751
DFAMPD00207 A: RNCC: 2 | RNVC: 2

12 Oct 2000

5110-15-136-0584
Tagliadadi

151360584
1412G: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-17-701-5688
Hand File

177015688
12601003 NICHOLSON: RNCC: 3 | RNVC: 2
3685: RNCC: 3 | RNVC: 2

19 Jun 1970

5110-21-808-8235

5110-99-439-4415
Hand File

994394415
BS498PT1: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
F1FA13268: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-454-3294
Diagonal Cutting Pliers

144543294
195.20EG: RNCC: 3 | RNVC: 2
195-20EG: RNCC: 5 | RNVC: 2
195.20 EG: RNCC: 5 | RNVC: 2
195.20EG: RNCC: 5 | RNVC: 2
0145230: RNCC: 5 | RNVC: 2
3148511452301: RNCC: 5 | RNVC: 2

1 Apr 1992

5110-14-477-7230
End Cutting Nippers

144777230
NO PRIMARY REF14-477-7230: RNCC: 3 | RNVC: 2
408: RNCC: 5 | RNVC: 2
91471040: RNCC: 5 | RNVC: 2
0175300: RNCC: 5 | RNVC: 9

20 Sep 1995

5110-14-315-3571
Ciseau Bouts Ronds

143153571
8-140MM: RNCC: 3 | RNVC: 2

1 Jan 1975

5110-12-190-6462
Hand File

121906462
2403-140-1: RNCC: 3 | RNVC: 2
2192141: RNCC: 3 | RNVC: 2
2192-140-1: RNCC: 3 | RNVC: 9

7 Dec 1981

5110-15-184-7602
Raschietto

151847602
3ZANFETQN60: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-389-8095
Oval Cutting Punch

123898095
50.0642.00: RNCC: 3 | RNVC: 2

27 Aug 2012

5110-15-210-4784
Serie Scalpelli Da

152104784
EX5110RI2711863: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-335-6825
Hand Metal Stamping Die Set

143356825
1-01-27-015: RNCC: 3 | RNVC: 2

30 Jun 1976

5110-14-325-1885
Pince Pour Fil Elec

143251885
NO PRIMARY REF14-325-1885: RNCC: 3 | RNVC: 2
W3N0IR: RNCC: 5 | RNVC: 9
85-660-5450: RNCC: 6 | RNVC: 9

2 Jul 1975

5110-37-513-8921
Hand File

375138921
5110571101883: RNCC: 3 | RNVC: 2
2820-0024 GOST1465-80: RNCC: 5 | RNVC: 2

30 Jul 2007

5110-15-217-8088
Butteruolo

152178088
ST-2362: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-013-4278
Hand File

660134278
904896: RNCC: 3 | RNVC: 2
HALFR0UND: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-22-616-2660
Coping Saw Blade

226162660
82311014: RNCC: 3 | RNVC: 2

11 Dec 2007

5110-12-132-2338
Hand Reamer

121322338
101.24.000: RNCC: 3 | RNVC: 2
101-24-000: RNCC: 5 | RNVC: 2
800-10HC: RNCC: 5 | RNVC: 2

30 May 1969

5110-17-055-3526
Bearing Scraper

170553526
620-20: RNCC: 3 | RNVC: 2
620-20: RNCC: 3 | RNVC: 2

19 Jul 1984

5110-15-231-3525
S Stampini Lettere

152313525
605: RNCC: 3 | RNVC: 2
145100: RNCC: 3 | RNVC: 2
511015E051268: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-21-105-0026
Punch And Die S Die

211050026
2: RNCC: 3 | RNVC: 1
310080109: RNCC: 3 | RNVC: 2
1F3: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-15-004-6968
Inserti A Croce Ph-

150046968
2835.10: RNCC: 3 | RNVC: 2

9 Dec 2013

5110-14-274-7912
Scie A Monture Lame

5110-17-102-0444
Hand Wire Stripper

171020444
752231080030: RNCC: 3 | RNVC: 2

3 Mar 1988

5110-14-210-5434

5110-21-105-2130
Punch And Die Punch

211052130
2: RNCC: 3 | RNVC: 1
300080203: RNCC: 3 | RNVC: 2
1F36: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-15-215-8078
Punta Riaff.Tonda A

152158078
20207: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-219-3200
Taglierina Orizzont

152193200
160-D: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-271-6966

5110-98-851-7354
Hand File

988517354
250MM 3SQ SMOOTH: RNCC: 3 | RNVC: 2
FA265X STUBS: RNCC: 6 | RNVC: 9

1 Dec 1976

5110-21-116-8338
Cork Borer Sharpener

211168338
12485: RNCC: 3 | RNVC: 2
27-170: RNCC: 3 | RNVC: 2
7-865: RNCC: 3 | RNVC: 2
11-790: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-98-105-3298
Diagonal Cutting Pliers

981053298
NO PRIMARY REF 98-105-3298: RNCC: 3 | RNVC: 2
UTICA 47: RNCC: 5 | RNVC: 2

25 Aug 1976

5110-21-865-8257
Hand File

218658257
15-223-10B: RNCC: 3 | RNVC: 1

14 Apr 1972

5110-12-312-0681
Sealing Surface Milling Cutter

123120681
124481: RNCC: 3 | RNVC: 2
12-448-1: RNCC: 5 | RNVC: 2
E5930-00-01: RNCC: 5 | RNVC: 2

17 Nov 1987

5110-15-117-7964
Reamer

151177964
P-175502-401/402-12C001-1005: RNCC: 3 | RNVC: 2
P175502-401/402-12C001-1005: RNCC: 5 | RNVC: 2

28 Jan 1994

5110-99-645-0697
Cutter Assembly

996450697
WD01-10-900013WWS71: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-13-118-8287
Hand Metal Stamping Die

131188287
NO PRIMARY REF 13-118-8287: RNCC: 3 | RNVC: 2
7000502: RNCC: 5 | RNVC: 2

4 Mar 2004

5110-66-149-8131
Rigid Handle Machete

661498131
NO PRIMARY REF 66-149-8131: RNCC: 3 | RNVC: 2
00292825: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-15-063-9413
Electricians' Scissors

150639413
62322-29/002: RNCC: 3 | RNVC: 2

25 May 1983

5110-14-560-0155
Channel Chisel

145600155
RD-MS-1001: RNCC: 3 | RNVC: 2
10317395: RNCC: 6 | RNVC: 9

13 Mar 2009

5110-12-129-3915
Hand Reamer

121293915
DIN859-B12,5-HSS: RNCC: 2 | RNVC: 2
415-12,50: RNCC: 3 | RNVC: 2
11606999-12,5: RNCC: 3 | RNVC: 2
011011-12,5: RNCC: 3 | RNVC: 2
12-5DIN859SCHNELLARBEITSSTAHLSP-: RNCC: 5 | RNVC: 9

30 May 1969

5110-25-128-9255
Solid Center Punch Set

251289255
HK7: RNCC: 3 | RNVC: 2
USAGHK7: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-12-123-7110
Smooth Plane

121237110
DIN7311-48: RNCC: 2 | RNVC: 2
105S/48: RNCC: 3 | RNVC: 2
EMM105S/48: RNCC: 5 | RNVC: 2
48DIN7311: RNCC: 5 | RNVC: 2
HW4-48: RNCC: 5 | RNVC: 9
652A104-48: RNCC: 5 | RNVC: 9

30 May 1969

5110-98-205-5148
Tube Cutter

982055148
DFAMPD00240 C: RNCC: 2 | RNVC: 2

23 Jan 2001

5110-21-639-4133

5110-21-639-4296

5110-12-129-3895
Hand Reamer

121293895
DIN859-B22,5-HSS: RNCC: 2 | RNVC: 2
415-22,50: RNCC: 3 | RNVC: 2
11606999-22,5: RNCC: 3 | RNVC: 2
011011-22,5: RNCC: 3 | RNVC: 2
22-5DIN859SCHNELLARBEITSSTAHLSP-: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-609-9988
Knife Blade

226099988
KDSLB-10H: RNCC: 3 | RNVC: 2

21 Mar 2005

5110-21-639-4385
Hand File

216394385
911716: RNCC: 3 | RNVC: 2
39GP30: RNCC: 4 | RNVC: 1
6Q38500-6: RNCC: 6 | RNVC: 9
ZCC180-165: RNCC: 6 | RNVC: 9

27 Sep 1966

5110-99-122-8223
Hand Reamer

991228223
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-210-7114
Assortimento Lime U

152107114
519/990B: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-551-4026
Craftsman's Knife

995514026
NO PRIMARY REF 99-551-4026: RNCC: 3 | RNVC: 2
AES/02/002/003: RNCC: 5 | RNVC: 2

13 Jul 2006

5110-66-120-5120
Hand Reamer

661205120
ADJUSTABLE REAMER: RNCC: 3 | RNVC: 1
653 0139: RNCC: 3 | RNVC: 2

9 Jun 1984

5110-15-123-7989
Tagliatubo Con Rull

151237989
1065G4: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-215-2975
Completo Sbavatore

152152975
ABC-F8420: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-165-3927
Utensile Da Tornio

151653927
7771612: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-17-026-8984
Hand File

170268984
TVA5110-2-263-007.1.1.5: RNCC: 3 | RNVC: 2
TVA5110-2-263-007: RNCC: 5 | RNVC: 1

8 Jan 1973

5110-25-102-8482
Hand Cape Chisel

251028482
KM6-4: RNCC: 3 | RNVC: 2
KM6-4IN: RNCC: 3 | RNVC: 2
217110-4: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-15-219-1473
Serie Pinze

152191473
B1710: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-13-107-9931
Hand Operated Wire Rope Cutter

131079931
607-7200: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-25-109-8353

5110-25-102-3350

5110-12-130-9623
Hand Valve Seat Rotary Tool

121309623
218.11.000: RNCC: 3 | RNVC: 2
218-11-000: RNCC: 5 | RNVC: 2
900-1VD3: RNCC: 5 | RNVC: 9
VD3-45/30DEG: RNCC: 5 | RNVC: 9

30 May 1969

5110-27-027-1627
Diagonal Cutting Pliers

270271627
10131KP0313: RNCC: 2 | RNVC: 1
04022504777: RNCC: 2 | RNVC: 1
72B18-35185-AA: RNCC: 2 | RNVC: 1

12 Sep 2005

5110-21-639-6423
Bearing Scraper

216396423
381: RNCC: 3 | RNVC: 2
5110-1101: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-98-852-6838
Diagonal Cut Pliers

5110-15-186-0945
Portaferri Sicutool

151860945
9728G-28: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-210-6538
Estrattore X Filett

152106538
512303: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-910-9955
Hand Reamer

999109955
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16210: RNCC: 6 | RNVC: 9
10113: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-865-8661
Hand Side Cutting Chisel

218658661
830: RNCC: 3 | RNVC: 1

14 Apr 1972

5110-27-011-1254
Hand File

270111254
10121ME0083: RNCC: 2 | RNVC: 1
07002YE0007: RNCC: 2 | RNVC: 1

20 Jan 2003

5110-14-457-3006
Hand Metal Cutting Shears

144573006
982: RNCC: 3 | RNVC: 2
3148512170006: RNCC: 5 | RNVC: 2
0713 03 40: RNCC: 5 | RNVC: 2
0217000: RNCC: 5 | RNVC: 9

25 Aug 1992

5110-14-451-4102
Double Bow Cutting Punch

144514102
245.J2DIAM22: RNCC: 3 | RNVC: 2

19 Nov 1991

5110-27-018-7901
Hand File

270187901
09013KE1022: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-99-206-1393

5110-21-105-0197

5110-27-012-0110
Plumber's Saw Blade

270120110
B00675040201: RNCC: 2 | RNVC: 1
500X40X2 MM: RNCC: 2 | RNVC: 1
DA0014665: RNCC: 2 | RNVC: 1

27 Dec 2001

5110-27-011-7719
Hand Reamer

270117719
09013KR1059: RNCC: 2 | RNVC: 1
10111KR5006: RNCC: 2 | RNVC: 1
09013KR1050: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-14-565-7770
Knife Blade

145657770
114113: RNCC: 3 | RNVC: 2

22 Sep 2010

5110-15-165-3946
Punteruolo In Accia

151653946
3454X60: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-137-9528
Tronchese

151379528
1086016: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-209-2990
Coltello Retraibile

152092990
1463022: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-910-5907
Smiths Set Chisel

999105907
NO PRIMARY REF 99-910-5907: RNCC: 3 | RNVC: 2
H2319: RNCC: 5 | RNVC: 2
H2319: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-529-1614
Hand Paint Scraper

995291614
NO PRIMARY REF 99-529-1614: RNCC: 3 | RNVC: 2
M3016: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-12-126-1603
Diagonal Cutting Pliers

121261603
2667B: RNCC: 3 | RNVC: 2
8314-130JCP: RNCC: 3 | RNVC: 2
106615: RNCC: 5 | RNVC: 2
7314151066154: RNCC: 5 | RNVC: 2
100570: RNCC: 5 | RNVC: 9
555ETI130: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-535-9167
Hand Cable Stripper

995359167
NO PRIMARY REF 99-535-9167: RNCC: 3 | RNVC: 2
663-364: RNCC: 5 | RNVC: 2

3 Jul 2001

5110-15-190-9165
Tagliatubi Da 3"

151909165
A: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-21-849-9316
Jointer Plane

218499316
8: RNCC: 3 | RNVC: 1
5110-0902: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-27-015-5529
Hand File

270155529
14001YP21622: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-66-120-4947
Hand Reamer

661204947
ADJUSTABLE REAMER: RNCC: 3 | RNVC: 1
653 0031: RNCC: 3 | RNVC: 2

14 Jun 1984

5110-15-165-4239
Giratubo In Mzw Lun

151654239
0614500: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-607-6468
Assembly Of Spanner

996076468
PE22133: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-21-870-0142
Thread Restorer File

218700142
TR2T: RNCC: 3 | RNVC: 2
5110-1230: RNCC: 5 | RNVC: 9

15 Mar 1973

5110-99-910-5793
Saw Keyhole Handle

999105793
UKD1S2108A: RNCC: 3 | RNVC: 2
FA14442: RNCC: 6 | RNVC: 9
51-11PT13: RNCC: 6 | RNVC: 9
1C3566: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-827-6261
Steering Knu Broach

998276261
NO PRIMARY REF 99-827-6261: RNCC: 3 | RNVC: 2
VR2138: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-66-150-2348
Scraping Knife

661502348
NO PRIMARY REF 66-150-2348: RNCC: 3 | RNVC: 2
07629303: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-99-910-4895
Hand File

999104895
DEF1098: RNCC: 4 | RNVC: 1
H00997: RNCC: 5 | RNVC: 2
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
F1FA13378: RNCC: 6 | RNVC: 9
9104895: RNCC: 6 | RNVC: 9
1A2852: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-4906
Hand File

999104906
DEF1098: RNCC: 4 | RNVC: 1
FA13411: RNCC: 6 | RNVC: 9
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-189-2148
Socket Module

991892148
HU27749: RNCC: 3 | RNVC: 2

9 Jan 2003

5110-98-200-1652
Hand File

982001652
NO PRIMARY REF 98-200-1652: RNCC: 3 | RNVC: 2
FLAT SMOOTH 350MM: RNCC: 5 | RNVC: 2

26 Feb 1986

5110-25-100-8886
Auger Handle

251008886
NO PRIMARY REF25-100-8886: RNCC: 3 | RNVC: 2
41-4538-290-140: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-99-408-6113
Scraper Blade

994086113
WD4288-00433-101: RNCC: 3 | RNVC: 2

28 Sep 2007

5110-16-006-1650
Hand File

160061650
286211503025: RNCC: 3 | RNVC: 2
8595055900655: RNCC: 5 | RNVC: 2
PZT 300/2: RNCC: 5 | RNVC: 2

9 Dec 2008

5110-21-105-0171

5110-15-217-5994
Archetto

152175994
EX511015R557232: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-727-0616

5110-99-779-6045

5110-22-611-8645
Hand Metal Cutting Shears

226118645
7695 101 85: RNCC: 3 | RNVC: 2

26 Oct 2005

5110-12-311-2346
Knockout Punch And Die

123112346
18.524.11: RNCC: 3 | RNVC: 2

7 Aug 1987

5110-15-176-8976
Taglierino Stanley

151768976
98611: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-98-205-4176
Hand Hacksaw Frame

982054176
DFAMPD00102: RNCC: 2 | RNVC: 2

11 Aug 2000

5110-15-176-4589
Punzoni In Acciaio

151764589
3036G: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-220-9915
Estrattore Per Sgan

152209915
110040: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-639-4352
Hand File

216394352
39GP30: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-21-885-2567
Tube Cutter Cutting Wheel

218852567
E-2558: RNCC: 3 | RNVC: 2

28 Jul 1981

5110-27-007-3835
Hand File

270073835
B150-2: RNCC: 2 | RNVC: 1
012456: RNCC: 2 | RNVC: 1
012456: RNCC: 5 | RNVC: 9

20 Jun 2002

5110-14-298-7828
A Monture Scie

142987828
NO PRIMARY REF14-298-7828: RNCC: 3 | RNVC: 2
255TM40-40-150: RNCC: 5 | RNVC: 2
4559-40METALLIQ: RNCC: 5 | RNVC: 9
255TM40-40-150: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-12-124-6296
Finger Grip Hand Saw

121246296
TL8465-0161-13: RNCC: 2 | RNVC: 2
JK106-60-033: RNCC: 3 | RNVC: 2
046-5-100A: RNCC: 5 | RNVC: 2
TK-BA24-8465-042-BILD 13: RNCC: 5 | RNVC: 9
046-5-100A: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-133-0228
Hand Reamer

661330228
DA90086000: RNCC: 3 | RNVC: 2
TLD2060AR3-10-D: RNCC: 5 | RNVC: 9

28 Jun 1989

5110-13-102-8923
Hand Reamer

131028923
NBN485H8-18CS: RNCC: 2 | RNVC: 2

1 Apr 1975

5110-99-428-9616
Hand Reamer

994289616
BS122-1952: RNCC: 4 | RNVC: 1
BS122PT2: RNCC: 4 | RNVC: 1
F1FA16222: RNCC: 6 | RNVC: 9
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-22-626-0494
Diagonal Cutting Pliers

226260494
243-493: RNCC: 3 | RNVC: 2
4131: RNCC: 3 | RNVC: 2
BACHO 4131: RNCC: 3 | RNVC: 2
504420131: RNCC: 5 | RNVC: 2

31 Oct 2013

5110-99-456-2364
Type Precision File

994562364
DEFSTAN51-11PT6: RNCC: 6 | RNVC: 9
F1FA13562: RNCC: 6 | RNVC: 9

14 Feb 1980

5110-14-375-0968
End Cutting Nippers

143750968
491-19EL: RNCC: 3 | RNVC: 2
3148511798003: RNCC: 5 | RNVC: 2
0715 02 03: RNCC: 5 | RNVC: 2

30 Jan 1982

5110-21-105-0108

5110-22-610-1057
Adz Handle

226101057
0714 42 01: RNCC: 3 | RNVC: 2

7 Apr 2005

5110-21-893-1445
Hand File

218931445
73-24300: RNCC: 3 | RNVC: 2

10 Sep 1983

5110-99-740-0406
Hand Wire Stripper

997400406
NO PRIMARY REF 99-740-0406: RNCC: 3 | RNVC: 2
3756-0.3MM/28AWG: RNCC: 5 | RNVC: 2
5013969498004: RNCC: 5 | RNVC: 2
3746: RNCC: 5 | RNVC: 9
1H/1382: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-718-9268
Valve Cutter Handle

997189268
316X: RNCC: 3 | RNVC: 2
99-402-0449: RNCC: 6 | RNVC: 9

1 Oct 1981

5110-21-639-4893
Hand File

216394893
39GP53: RNCC: 4 | RNVC: 1

29 Oct 1963

5110-23-113-9181
Hand Saws (12")

231139181
Q0400018: RNCC: 3 | RNVC: 2

12 Jun 2004

5110-41-001-0088
Razor Blade Glass Scraper

410010088
7032-056: RNCC: 3 | RNVC: 2

1 Jul 2009

5110-27-010-6655
Hand File

270106655
99999-NIIN-DA0037123: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-19-004-3912
Sheet Metal Ripping Cutter

190043912
7815-0002 OST 1.52509-81: RNCC: 3 | RNVC: 2

2 Feb 2011

5110-66-114-1794
Edge Cutting Trimming Tool

661141794
707/543: RNCC: 3 | RNVC: 2

14 May 1982

5110-99-562-5434
Hand Reamer

995625434
R-6Y-205/8: RNCC: 3 | RNVC: 2
26DL-96110: RNCC: 6 | RNVC: 9

20 Jun 2002

5110-21-105-2501
Tailor's Shears

211052501
4-1S: RNCC: 3 | RNVC: 2
309357: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-99-726-3768
Hand Reamer

5110-15-221-4898
Fustella

152214898
EX5110RN0401493: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-98-107-6982
Hand Reamer

981076982
TAPER SPECIAL 5/32IN.: RNCC: 3 | RNVC: 2

2 Feb 1984

5110-22-615-3677
Hole Saw

226153677
53080: RNCC: 3 | RNVC: 2

7 Jun 2007

5110-15-136-1711
Taglia Ferri Acciai

151361711
1879-750: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-22-221-3640
Hand File

222213640
1156/1-100MM: RNCC: 3 | RNVC: 2

4 Dec 1972

5110-14-472-3913
Hand Metal Cutting Shears

144723913
883.32: RNCC: 3 | RNVC: 2
3148512102458: RNCC: 5 | RNVC: 2
883-32: RNCC: 5 | RNVC: 2
0210245: RNCC: 5 | RNVC: 9

19 Oct 1994

5110-99-910-6474
Hand Metal Stamping Die

999106474
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
FA17802: RNCC: 6 | RNVC: 9
1C2343: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H2610: RNCC: 6 | RNVC: 9
H2610: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-807-1051
Pipe Cutter

218071051
3S: RNCC: 3 | RNVC: 1
3T: RNCC: 5 | RNVC: 2

5 Feb 1964

5110-12-023-0152

5110-12-123-7076
Hatchet Handle

121237076
DIN5132-C450: RNCC: 2 | RNVC: 2
C450DIN5132: RNCC: 5 | RNVC: 2
450DIN7229: RNCC: 5 | RNVC: 9
DIN5132C450: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-140-3180
Double Bow Cutting Punch

121403180
NO PRIMARY REF 12-140-3180: RNCC: 3 | RNVC: 2
5731-53: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-126-1279
Hand File

121261279
2192103: RNCC: 3 | RNVC: 2
2403-100-3: RNCC: 3 | RNVC: 2
L50X3DIN8342: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-801-0797
Single Bow Cutting Punch

218010797
148: RNCC: 3 | RNVC: 1
1804-16: RNCC: 3 | RNVC: 2
5110-0967: RNCC: 5 | RNVC: 9
777: RNCC: 5 | RNVC: 9

23 Jan 1964

5110-21-889-5947
File Handle

218895947
73-99210: RNCC: 3 | RNVC: 2
108: RNCC: 5 | RNVC: 2

29 Jul 1982

5110-15-221-4724
Scalpello

152214724
EX5110RI7422245: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-305-8293
Knockout Punch And Die

123058293
74331102: RNCC: 3 | RNVC: 9

19 Dec 1985

5110-21-885-1719

5110-25-101-0778
Single Bit Ax

251010778
FS 5110-0402: RNCC: 2 | RNVC: 2
07380: RNCC: 3 | RNVC: 2
41-1187-300-140: RNCC: 5 | RNVC: 2
248H: RNCC: 5 | RNVC: 9
210107-6: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-14-428-5449
Canon De Pe Support

144285449
4602PSE000-0001: RNCC: 3 | RNVC: 2

8 Dec 1988

5110-12-126-1443
Hand Reamer

121261443
NO PRIMARY REF 12-126-1443: RNCC: 3 | RNVC: 2
6DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-150-1495
Hand Rasp

661501495
NO PRIMARY REF 66-150-1495: RNCC: 3 | RNVC: 2
07155301: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-14-570-9805
Hand Cable Stripper

145709805
45-400: RNCC: 3 | RNVC: 2

9 Feb 2012

5110-22-618-5599
Tube Cutter

226185599
0620 530 015: RNCC: 3 | RNVC: 2

22 Jan 2009

5110-17-110-7358
Hand Reamer

171107358
P926-0,1895-0,1562: RNCC: 3 | RNVC: 2
P926-: RNCC: 6 | RNVC: 9

18 Feb 1997

5110-15-104-8766
Artigiano Coltello

151048766
2/20671-13.03.73-03-US-01: RNCC: 3 | RNVC: 2

30 May 1989

5110-12-151-3215
Ven Schneideinsatz

121513215
21664210: RNCC: 3 | RNVC: 2
216.64.210STAHL3: RNCC: 5 | RNVC: 2
200-66: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-618-1401
Wood Scraper

226181401
6698-0010: RNCC: 3 | RNVC: 2

22 Oct 2008

5110-12-312-4117
Hand Reamer

123124117
1013-101.49 W3: RNCC: 3 | RNVC: 2

30 Dec 1987

5110-99-465-8072

5110-66-120-4707
Paper Cutter

661204707
NEOLT PLAN TRIMMER: RNCC: 3 | RNVC: 2

2 Jun 1984

5110-12-140-4363

5110-15-123-2596
Lima Ad Ago Tipo Tr

151232596
5581-4-160: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-66-023-1817
Blacksmith's Chisel

660231817
247: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-14-566-8426
Knife Blade

145668426
A032007: RNCC: 3 | RNVC: 2

4 Jan 2011

5110-14-267-4787
Single Bow Cutting Punch

142674787
8017070001: RNCC: 3 | RNVC: 2
213-7: RNCC: 3 | RNVC: 2
SYB0281: RNCC: 5 | RNVC: 2
375-7: RNCC: 5 | RNVC: 9
345-10-7: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-12-159-2508
Firmer Chisel

121592508
DIN5139-B24GA: RNCC: 2 | RNVC: 2
B24GADIN5139: RNCC: 5 | RNVC: 2
5110-0024-11: RNCC: 5 | RNVC: 9
TL5110-0024-11: RNCC: 5 | RNVC: 9
164-24: RNCC: 5 | RNVC: 9
DIN5139B24GA: RNCC: 5 | RNVC: 9
5110-024-11: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-214-7798
Alesatore

152147798
ZT154-30-3/32: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-910-5831
Bearing Scraper

999105831
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H20330: RNCC: 5 | RNVC: 2
DL-9-A-H5651: RNCC: 6 | RNVC: 9
H5651: RNCC: 6 | RNVC: 9
FA16726: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H2230A: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-039-2114
Valve Seat Cutter

660392114
144204: RNCC: 3 | RNVC: 2

23 Apr 1971

5110-15-124-9166
Forbice Per Elettri

151249166
656A: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-21-868-0148
Metal Cutting Hand Saw

218680148
HS13: RNCC: 3 | RNVC: 2

14 Jul 1972

5110-14-237-3546
Emporte-Piece Speci

142373546
000114005P: RNCC: 3 | RNVC: 2
1885B4: RNCC: 5 | RNVC: 9

1 Jan 1967

5110-14-235-6970

5110-14-259-3859

5110-21-878-2792
File Handle

218782792
58-2894: RNCC: 3 | RNVC: 2
58-2894X: RNCC: 5 | RNVC: 1

22 Aug 1978

5110-15-212-3418
Lame Di Ricambio 3M

152123418
802-13: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-910-4835
Hand File

999104835
C00RDPATH758: RNCC: 2 | RNVC: 2
DEF1098: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
FA13252: RNCC: 6 | RNVC: 9
9104835: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-639-4431
Hand File

216394431
39GP30: RNCC: 4 | RNVC: 1
5110-0417: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-25-148-9599
Hand Optical Fiber Cleaving Tool

251489599
7R-22: RNCC: 3 | RNVC: 2

21 Mar 2001

5110-12-314-5394
Hand Reamer

123145394
3914.00000.058: RNCC: 3 | RNVC: 2
10-215: RNCC: 3 | RNVC: 2
10215: RNCC: 5 | RNVC: 2

16 Jul 1988

5110-15-216-0448
Giravite Set

152160448
COMFORCE-SCHRODER-UNIFIX: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-137-9092
Magazine Scissors

991379092
ASSK666: RNCC: 3 | RNVC: 1
51753215: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-186-0909
Stelo Obliquo Sicut

151860909
9730G-28: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-66-135-0750
Synthetic R Cutter

661350750
ENGEL 11560 W/800R BLADE: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

15 Apr 1991

5110-21-878-2894
Hand File

218782894
58-2814: RNCC: 3 | RNVC: 1
39GP30: RNCC: 4 | RNVC: 1

17 Oct 1978

5110-99-910-5742
Hand Saw Chain

999105742
H2169: RNCC: 3 | RNVC: 2
UK/DIS/2108-H2169: RNCC: 5 | RNVC: 2
DZ: RNCC: 5 | RNVC: 2
FA16645: RNCC: 6 | RNVC: 9
1C5088: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-27-014-5883
Hand File

270145883
NF1601/12: RNCC: 2 | RNVC: 1
NF1601: RNCC: 2 | RNVC: 1
NF-1601: RNCC: 2 | RNVC: 1

11 Nov 2002

5110-99-942-0341
Hand Reamer

999420341
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
11/32" HAND TAPER PIN REAMER: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-843-7760
Hand Reamer

218437760
B174-2: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
712-049410: RNCC: 3 | RNVC: 2
50-10971: RNCC: 3 | RNVC: 2
B5-14: RNCC: 4 | RNVC: 1

4 Jun 1968

5110-15-212-7266
Sega A Tazza Con De

152127266
HM3808-38: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-197-2564
Screw Thread Insert Breaker

151972564
PN UAS 00022113: RNCC: 3 | RNVC: 2
5120F76014718: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-99-910-5133
Paring Gouge

999105133
BS1943: RNCC: 4 | RNVC: 1
H1131: RNCC: 4 | RNVC: 1
FA13980: RNCC: 6 | RNVC: 9
1B1283: RNCC: 6 | RNVC: 9
9105133: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-386-2802
Oval Cutting Punch

123862802
50.000.192: RNCC: 3 | RNVC: 2

22 Aug 2011

5110-99-910-4154
Instrument Broach

999104154
DEF1198: RNCC: 4 | RNVC: 1
FA10548: RNCC: 6 | RNVC: 9
1A4002: RNCC: 6 | RNVC: 9
9104153: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-361-3183
Paper Cutter

123613183
00448: RNCC: 3 | RNVC: 2
DAHLE 448: RNCC: 5 | RNVC: 2
7520-10740: RNCC: 6 | RNVC: 9

16 Sep 2003

5110-12-122-2514
Hand Reamer

121222514
513A203HSS5-16: RNCC: 3 | RNVC: 2

30 May 1969

5110-21-639-5715
Knockout Punch And Die

216395715
730: RNCC: 3 | RNVC: 1
GGGB836: RNCC: 4 | RNVC: 1
MS16323-11: RNCC: 4 | RNVC: 1
1002438: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-99-910-4934
Hand File

999104934
DEF1098: RNCC: 4 | RNVC: 1
H01040: RNCC: 5 | RNVC: 2
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
FA13529: RNCC: 6 | RNVC: 9
1A1144: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-27-000-8116
Hand Metal Cutting Shears

270008116
5110-0800-0009: RNCC: 2 | RNVC: 1
GNSNOR5162447: RNCC: 2 | RNVC: 1
6821 05 0300: RNCC: 3 | RNVC: 2
6821050300: RNCC: 5 | RNVC: 9

11 Jun 1991

5110-12-127-7395
Single Bow Cutting Punch

121277395
DIN7200-B25: RNCC: 2 | RNVC: 2
B25DIN7200: RNCC: 5 | RNVC: 2
DIN7200B25: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-116-6046
Asphalt Tile Cutter

211166046
001: RNCC: 3 | RNVC: 2
A: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-27-000-8060
Single Bow Cutting Punch

270008060
5700 24 0021: RNCC: 3 | RNVC: 2

11 Jun 1991

5110-27-011-7709
Hand Reamer

270117709
09013KR1001: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-99-533-8650
Re Combination Tool

995338650
GQD31470: RNCC: 3 | RNVC: 2
D31470-001-3: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-14-403-8793
Bois Rabot Lame

144038793
372.10: RNCC: 3 | RNVC: 2
372-10: RNCC: 5 | RNVC: 2

28 Aug 1985

5110-99-421-9335
Glass Cutter

994219335
240/0200/00: RNCC: 3 | RNVC: 2
97HA05A: RNCC: 6 | RNVC: 9

14 Jan 1997

5110-13-102-8704
Ship Scraper

131028704
NO PRIMARY REF 13-102-8704: RNCC: 3 | RNVC: 2
2618: RNCC: 5 | RNVC: 9

1 Apr 1975

5110-14-256-8845
Single Bow Cutting Punch

142568845
4637-23: RNCC: 3 | RNVC: 9

1 Jan 1969

5110-66-013-7599
Hand Reamer

660137599
HAND REAMER: RNCC: 3 | RNVC: 1
650 4922: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-14-490-8847
Alesoir

144908847
4067 010 001 851: RNCC: 3 | RNVC: 2
F300 0T 000 5119: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-98-852-0450
Hand Reamer

988520450
9994128: RNCC: 3 | RNVC: 2

13 Oct 1977

5110-12-317-1202
Hand File

123171202
0811 421 8971: RNCC: 3 | RNVC: 9
08114218971: RNCC: 5 | RNVC: 2

10 Mar 1989

5110-37-180-0942

5110-12-367-3068
Diagonal Cutting Pliers

123673068
T39073 650: RNCC: 3 | RNVC: 2
7406160: RNCC: 3 | RNVC: 2
109526: RNCC: 3 | RNVC: 2
66027160: RNCC: 3 | RNVC: 2
4003773040705: RNCC: 5 | RNVC: 2

2 Aug 2005

5110-12-139-8861
Hand File

121398861
NO PRIMARY REF 12-139-8861: RNCC: 3 | RNVC: 2
C100X5DIN8333: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-610-2535
Tube Cutter

226102535
H8 6-8IN: RNCC: 3 | RNVC: 2

29 Apr 2005

5110-99-051-9892
Scraper

990519892
CSDE/CHK/GSS/191: RNCC: 3 | RNVC: 2

22 Mar 1996

5110-14-489-4266
Hand Operated Cable Cutter

144894266
517-24POPVC: RNCC: 3 | RNVC: 2
121035: RNCC: 5 | RNVC: 2
517-121035: RNCC: 5 | RNVC: 2

22 Jul 1997

5110-27-010-6547
Hand File

270106547
99999-NIIN-DA0014043: RNCC: 2 | RNVC: 1

20 Jun 2002

5110-66-149-9403
Craftsman's Knife

661499403
NO PRIMARY REF 66-149-9403: RNCC: 3 | RNVC: 2
01142934: RNCC: 5 | RNVC: 2

10 Apr 2003

5110-33-158-4970
Firmer Chisel Set

331584970
118.510/J: RNCC: 3 | RNVC: 2

21 Mar 1994

5110-15-123-6341
Lima A Mazzo Mezzo

151236341
2581-2: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-230-4131
Lima Piatta

152304131
2560/1/8: RNCC: 3 | RNVC: 2
511015E078589: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-195-3875
Lama Trapezoidale L

151953875
CUT4RB: RNCC: 3 | RNVC: 2
(241)A5964CUT4RB: RNCC: 5 | RNVC: 2

21 Mar 2011

5110-15-137-9599
Tronchese A Taglien

151379599
1191001: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-137-8350
Lima Quadrata

151378350
2565/1-6: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-21-639-4389
Hand File

216394389
39GP30: RNCC: 4 | RNVC: 1
8F4389: RNCC: 5 | RNVC: 9
REVB: RNCC: 5 | RNVC: 9
5110-0502: RNCC: 5 | RNVC: 9
639-4389: RNCC: 5 | RNVC: 9
35029: RNCC: 5 | RNVC: 9
5110-1822: RNCC: 5 | RNVC: 9

4 Jun 1968

5110-15-218-9208
Spazzola Di Ottone

152189208
618: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-172-8183
Firmer Chisel

991728183
M313: RNCC: 3 | RNVC: 1
M313 9MM: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-12-370-9286
Bearing Scraper

123709286
464 200 0: RNCC: 3 | RNVC: 2
83 6600: RNCC: 3 | RNVC: 2
02.19.74.52: RNCC: 5 | RNVC: 2

17 Jan 2007

5110-66-023-5736
Hand Cable Stripper

660235736
SHEATHMASTERJK: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-14-264-0415
Rabbet Plane

142640415
4549-24: RNCC: 3 | RNVC: 9
D401E24: RNCC: 5 | RNVC: 9
582-24: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-99-466-5346
Scalpel Blade

994665346
NO PRIMARY REF 99-466-5346: RNCC: 3 | RNVC: 2
PH21555: RNCC: 5 | RNVC: 1
DR262-24: RNCC: 5 | RNVC: 9
NO 24: RNCC: 6 | RNVC: 9
14B4926: RNCC: 6 | RNVC: 9
DKF420-130K: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-002-4632
Reamer

150024632
34004 01 2172: RNCC: 3 | RNVC: 2

29 Aug 2013

5110-14-262-8136
Tariere Torse A Vis

142628136
12-4-48: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-511-1386
Cutting Punch Insert

145111386
245A.T28: RNCC: 3 | RNVC: 2

2 Dec 1998

5110-15-151-4578
Adz

151514578
DMMA0020000: RNCC: 3 | RNVC: 2

29 May 2000

5110-12-381-0576
Bow Saw Blade

123810576
708M2: RNCC: 3 | RNVC: 2

6 Jan 2010

5110-14-540-7901
Horseshoer's Clinch Cutter

145407901
DERIVDIA: RNCC: 3 | RNVC: 2

23 Apr 2004

5110-14-264-4924

5110-13-103-2403
Hand Hacksaw Blade

131032403
ECLIPSEWSFLEX10-18: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-15-213-3043
Lima Piatta A Punta

152133043
2-301-14-4-0: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-17-124-6146
Hand Metal Cutting Punch And Die

171246146
ROND 6.85: RNCC: 3 | RNVC: 2

26 Nov 2012

5110-98-105-8801

5110-15-191-7458
Tronchesi Taglio Fr

151917458
564GP: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-136-2530
Scalpello Per Legno

151362530
6055-1-6: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-25-109-6810
Bent Trimmers Shears

251096810
NO PRIMARY REF25-109-6810: RNCC: 3 | RNVC: 2
1-0886: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-15-208-4865
Cesoia

152084865
4KCAITDX450: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-389-8731

5110-15-002-4642
Hole Check

150024642
34079 08 2231: RNCC: 3 | RNVC: 2

29 Aug 2013

5110-99-292-4642
Settling Bush

992924642
MC1276171: RNCC: 3 | RNVC: 2

16 May 2002

5110-99-378-4490
Straight Trimmers Shears

993784490
01-6431: RNCC: 3 | RNVC: 2
3700-10R: RNCC: 5 | RNVC: 2
CM4/145: RNCC: 6 | RNVC: 9

8 May 2004

5110-25-100-4310
Hand Metal Cutting Shears

251004310
NO PRIMARY REF25-100-4310: RNCC: 3 | RNVC: 2
41-7392-030-120: RNCC: 5 | RNVC: 2
213003-3: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-21-866-3239
Hand Reamer

218663239
50-11028: RNCC: 3 | RNVC: 2

19 May 1972

5110-22-606-0971
Hand Reamer

226060971
817-100: RNCC: 3 | RNVC: 2
8014254: RNCC: 3 | RNVC: 2

13 Jan 2004

5110-99-764-3050
Cable Stripper Blade

997643050
H35/27-1: RNCC: 3 | RNVC: 2
45-1819-1(MOD): RNCC: 5 | RNVC: 2
45-1819-1: RNCC: 5 | RNVC: 2
45-1819-1 (MOD): RNCC: 6 | RNVC: 9

16 Apr 1992

5110-34-031-2100
Handle Pump

340312100
M/LV/TRAILER (WATER BOWZER)-10: RNCC: 3 | RNVC: 2
M/LV/TRAILER (WATER BOWZER)-10: RNCC: 6 | RNVC: 9

20 Feb 2004

5110-15-230-3992
Punzoni Di Sicurezz

152303992
3687/3: RNCC: 3 | RNVC: 2
511015E061741: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-12-190-6460
Hand File

121906460
2112141: RNCC: 3 | RNVC: 2
2401-140-1: RNCC: 3 | RNVC: 2
2112-140-1: RNCC: 3 | RNVC: 9

7 Dec 1981

5110-15-214-6408
Impugnatura A Cacci

152146408
40A: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-905-9963
Single Bow Cutting Punch

219059963
M-34: RNCC: 3 | RNVC: 2

5 Aug 1989

5110-15-136-3723
Alesatore Cilindric

151363723
H1466-9: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-17-701-4751
Hand Reamer

177014751
6-75H7DIN206SS: RNCC: 2 | RNVC: 1
586-6-75: RNCC: 3 | RNVC: 2
DIN206: RNCC: 4 | RNVC: 1

14 May 1970

5110-15-125-1211
Pialla In Metallo A

151251211
5816: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-214-4451
Alesatore C.S. Da 2

152144451
040-24.5/27.5: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-610-0214
Pliers

226100214
EREM 9: RNCC: 3 | RNVC: 2

23 Mar 2005

5110-27-015-5531
Hand File

270155531
14001YP21624: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-21-102-3174
Expansion Rea Pilot

211023174
MBB: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-14-244-3675

5110-15-211-4482
Mola Felisatti Comp

152114482
M26SM: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-211-7697
Serie Lime Facom As

152117697
629800: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-637-5636
Reamer Blade Set

216375636
D: RNCC: 3 | RNVC: 2

25 May 1968

5110-98-103-3619
Hand File

981033619
100MM RD 2ND CUT: RNCC: 3 | RNVC: 2
100MM RD 2ND CUT: RNCC: 5 | RNVC: 9
FA393T STUBS: RNCC: 6 | RNVC: 9
100MM RD 2ND CUT: RNCC: 6 | RNVC: 9

1 Jun 1990

5110-99-779-0833
Hand Reamer

997790833
NO PRIMARY REF 99-779-0833: RNCC: 3 | RNVC: 2
TS525: RNCC: 5 | RNVC: 2
FJ1931-2: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-126-2015
Nozzle Broach

121262015
162000-1,3: RNCC: 3 | RNVC: 2
1620-1-3: RNCC: 5 | RNVC: 2
235-1-3: RNCC: 5 | RNVC: 9
W446-1-3: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-876-0386
Hand Masonry Drill

218760386
MT1006: RNCC: 3 | RNVC: 1
5133-3319: RNCC: 6 | RNVC: 9

21 Jun 1977

5110-66-149-7468
Hand File

661497468
NO PRIMARY REF 66-149-7468: RNCC: 3 | RNVC: 2
00809591: RNCC: 5 | RNVC: 2

8 Apr 2003

5110-14-397-0168
Single Bow Cutting Punch

143970168
450-3MM: RNCC: 3 | RNVC: 2

27 Nov 1984

5110-98-206-1638
Single Bit Ax Handle

982061638
DFAMPD04175: RNCC: 2 | RNVC: 2

12 Nov 2004

5110-51-000-0039
Pocket Knife

510000039
0.8363.3: RNCC: 3 | RNVC: 2

31 Jan 2005

5110-15-208-4913
Alesatore Serie

152084913
3AANFPFMNP4S10A21-4: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-4804
Alesatore Cilind. T

152084804
3AAXFCFRDP2-4: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-887-7500
Pipe Cutter

218877500
44-S: RNCC: 3 | RNVC: 2

9 Jan 1982

5110-17-112-9242
Single Bit Ax

171129242
411065BD: RNCC: 3 | RNVC: 2

22 Nov 1999

5110-21-116-7546
Retrac Safety Knife

211167546
318: RNCC: 6 | RNVC: 9

24 Feb 1969

5110-15-165-4269
Scalpello

151654269
35920X250: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-136-3939
Lama Intercambiabil

151363939
140084: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-175-2701
Lima

151752701
3LCNQUCNBSN400: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-98-205-5369
Hand File

982055369
DFAMPD00255: RNCC: 2 | RNVC: 2

5 Mar 2001

5110-98-103-3803

5110-66-028-5287

5110-15-204-3618
Cutter

152043618
47450040: RNCC: 3 | RNVC: 2
(241)ACA6447450040: RNCC: 5 | RNVC: 2

25 Oct 2011

5110-25-103-3377
Double Bow Cutting Punch

251033377
1IN: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-23-112-1889
Screwdriver.

231121889
590000911010: RNCC: 3 | RNVC: 2

18 May 1993

5110-12-131-7052
Drehwerkzeug Pilot

121317052
216.71.142: RNCC: 3 | RNVC: 2
000589086917: RNCC: 5 | RNVC: 2
200-24: RNCC: 5 | RNVC: 9
200-24VD1-9-9: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-892-1497
Glass Cutter

218921497
HDG-15: RNCC: 3 | RNVC: 2
HDG15: RNCC: 5 | RNVC: 2

21 Jan 1983

5110-12-127-7391
Single Bow Cutting Punch

121277391
DIN7200-B19: RNCC: 2 | RNVC: 2
B19DIN7200: RNCC: 5 | RNVC: 2
DIN7200B19: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-849-8186
Hand File

218498186
39GP30: RNCC: 4 | RNVC: 1
5110-0512: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-17-115-1754
Metal Cutting Hand Saw

171151754
ECLIPSE 72-66XR: RNCC: 3 | RNVC: 2

3 Oct 2002

5110-12-120-6025
Rip Hand Saw

121206025
DIN7244-400: RNCC: 2 | RNVC: 2
513-400: RNCC: 3 | RNVC: 2
400DIN7244: RNCC: 5 | RNVC: 2
1244001: RNCC: 5 | RNVC: 2
142-400: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-210-1952
Craft Knife Blade

222101952
1992 (5): RNCC: 3 | RNVC: 2

11 Nov 1974

5110-14-244-0776

5110-98-205-8503
Hand Wire Stripper

982058503
DFAMPD03060: RNCC: 2 | RNVC: 2

6 Mar 2003

5110-17-015-5877
Hand File

170155877
TS5110-0774-6IN: RNCC: 3 | RNVC: 2
TS5110-0774: RNCC: 5 | RNVC: 1
11000600: RNCC: 5 | RNVC: 2

17 Jun 1972

5110-12-190-6454
Hand File

121906454
2132141: RNCC: 3 | RNVC: 2
2407-140-1: RNCC: 3 | RNVC: 2
2132-140-1: RNCC: 3 | RNVC: 9

7 Dec 1981

5110-12-175-3636
Hand Wire Stripper

121753636
NO PRIMARY REF 12-175-3636: RNCC: 3 | RNVC: 2
2530-0-8-1-2: RNCC: 5 | RNVC: 9

11 Sep 1978

5110-21-637-5478
Hand Reamer

216375478
B94-2: RNCC: 3 | RNVC: 1
149: RNCC: 3 | RNVC: 1
B174-2: RNCC: 3 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1

6 Jun 1968

5110-99-910-5795
Piercing Saw

999105795
COORDPATH5544: RNCC: 2 | RNVC: 2
UKD1SPR0V2108: RNCC: 3 | RNVC: 2
FA16680: RNCC: 6 | RNVC: 9
PS51: RNCC: 6 | RNVC: 9
PS-51(70-PS1R): RNCC: 6 | RNVC: 9
51-11PT8: RNCC: 6 | RNVC: 9
1C7083: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-428-1600
Magazine Pincers

994281600
NO PRIMARY REF 99-428-1600: RNCC: 3 | RNVC: 2
DDTT10436: RNCC: 5 | RNVC: 2
517012: RNCC: 6 | RNVC: 9

27 Nov 1978

5110-99-812-6817
Hand Operated Cable Cutter Blade

998126817
30082-255: RNCC: 3 | RNVC: 2
70-40-533: RNCC: 5 | RNVC: 2

28 Feb 2008

5110-12-131-4711
Hand Reamer

121314711
131.18.000: RNCC: 3 | RNVC: 2
131-18-000: RNCC: 5 | RNVC: 2
700-4HC: RNCC: 5 | RNVC: 2

30 May 1969

5110-21-874-4734
Packing Cutte Knife

218744734
2300: RNCC: 3 | RNVC: 2
5110-1256: RNCC: 6 | RNVC: 9

22 Feb 1977

5110-15-208-7754
Alesatore

152087754
3AANGERMLN31-5X37X110: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-610-2542
Tube Cutter

226102542
6S 4-6IN: RNCC: 3 | RNVC: 2

29 Apr 2005

5110-21-639-6032
Back Saw

216396032
4: RNCC: 3 | RNVC: 1
MM14: RNCC: 3 | RNVC: 2
1514: RNCC: 5 | RNVC: 2
136HP14: RNCC: 5 | RNVC: 2
D-14: RNCC: 5 | RNVC: 9
248: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-14-234-5335
Tranchet De Bigorne

142345335
067350001756: RNCC: 3 | RNVC: 2

1 Jan 1967

5110-14-272-3618

5110-37-513-4961
Knockout Punch And Die

375134961
2A70.12.013: RNCC: 3 | RNVC: 2

13 Feb 2007

5110-14-207-7595

5110-14-493-0060
Alesoir

144930060
4067 010 000 185: RNCC: 3 | RNVC: 2
F300 0T 009 4407: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-12-341-7216
End Cutting Nippers

123417216
3799F: RNCC: 3 | RNVC: 2

18 Oct 1996

5110-14-244-3653

5110-15-191-6668
Serie Alfabetica Dc

151916668
DCS-A: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-22-609-6853
Hand Wire Stripper

226096853
510-BE-22: RNCC: 3 | RNVC: 2

17 Feb 2005

5110-12-332-6838
Hand Wire Stripper

123326838
3-835-2: RNCC: 3 | RNVC: 2

6 Sep 1993

5110-22-221-3792
Hand File

222213792
1146/3-150MM: RNCC: 3 | RNVC: 2

11 Dec 1972

5110-14-501-7912
Emporte Piece

145017912
NO PRIMARY REF14-501-7912: RNCC: 3 | RNVC: 2
4549 800 513 000: RNCC: 5 | RNVC: 9
2 646 800: RNCC: 5 | RNVC: 9
4067 790 001 763: RNCC: 5 | RNVC: 9
F300 0T 000 5259: RNCC: 6 | RNVC: 9

10 Nov 1997

5110-99-910-5925
Tailor Trimmers

999105925
F1FA16895: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-12-310-0408
Hand Metal Stamping Die Set

123100408
5100261: RNCC: 2 | RNVC: 2
TL5180-0146-020: RNCC: 2 | RNVC: 2
JD5110-12-310-0408: RNCC: 3 | RNVC: 2
5100261: RNCC: 5 | RNVC: 9
TL5180-0146GROSZBUCHSTABEN A-Z: RNCC: 5 | RNVC: 9

31 Mar 1987

5110-15-003-1192
Sega

150031192
A780/P: RNCC: 3 | RNVC: 2
(241)A6568A780/P: RNCC: 5 | RNVC: 2

28 Oct 2013

5110-15-208-4840
Alesatore

152084840
3AAXFCFRDP18-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-41-000-6746
Bow Saw Blade

410006746
7028-067: RNCC: 3 | RNVC: 2

7 May 2008

5110-15-230-4130
Lima Piatta

152304130
2560/1/5: RNCC: 3 | RNVC: 2
511015E078588: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-19-004-8118
Single Bit Ax

190048118
2605-4310.02: RNCC: 3 | RNVC: 2

2 Sep 2011

5110-99-122-3640
File Handle

991223640
PYTHON NO2: RNCC: 3 | RNVC: 2
H6437: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-244-0877

5110-12-377-6735
Craftsman's Knife

123776735
106011: RNCC: 3 | RNVC: 2

2 Feb 2009

5110-21-872-1275
Craftsman's Knife

218721275
L5H: RNCC: 3 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

3 Mar 1976

5110-14-490-8832
Alesoir

144908832
4067 010 000 295: RNCC: 3 | RNVC: 2
F300 0T 000 5104: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-14-336-5398

5110-99-120-2546
Hand Hacksaw Blade

991202546
BS1919: RNCC: 4 | RNVC: 1
H20288: RNCC: 5 | RNVC: 2
51-11PT7: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-149-7529
Hand File

661497529
NO PRIMARY REF 66-149-7529: RNCC: 3 | RNVC: 2
07078200: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-99-724-9298
Cable Cutters

997249298
735-728: RNCC: 3 | RNVC: 2

23 Jan 2008

5110-12-172-7240
Diagonal Cutting Pliers

121727240
3779: RNCC: 3 | RNVC: 2
HM-200: RNCC: 3 | RNVC: 2
3-067-2: RNCC: 3 | RNVC: 2
130468: RNCC: 5 | RNVC: 9
1304683: RNCC: 5 | RNVC: 9
2646H: RNCC: 5 | RNVC: 9

14 Feb 1978

5110-99-910-5554
Hollo Cutting Punch

999105554
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H1883: RNCC: 6 | RNVC: 9
H1883: RNCC: 6 | RNVC: 9
FA15961: RNCC: 6 | RNVC: 9
1K153: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-137-9468
Hand Metal Stamping Die Set

121379468
NO PRIMARY REF 12-137-9468: RNCC: 3 | RNVC: 2
4255-2-5: RNCC: 5 | RNVC: 2
5597-2-5: RNCC: 5 | RNVC: 9
3795-2-5: RNCC: 5 | RNVC: 9
SATZGR0SZ2-5DIN7353: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-466-9026
Roun Dimpling Punch

994669026
W62060: RNCC: 3 | RNVC: 2
W62060: RNCC: 5 | RNVC: 9
1C7028: RNCC: 6 | RNVC: 9
R-4-120: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-394-2530
Paper Cutter

123942530
804223-62: RNCC: 3 | RNVC: 2

14 Nov 2013

5110-13-102-8829
Hand Hacksaw Blade

131028829
A650-12-32: RNCC: 3 | RNVC: 9
ECLIPSEHS12-32: RNCC: 5 | RNVC: 2

1 Apr 1975

5110-15-208-4698
Lima

152084698
3LPKPFCNCNN160: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-893-0839
Hand Graver

218930839
36-586-1: RNCC: 3 | RNVC: 2
GR-100-6: RNCC: 3 | RNVC: 2
36-586: RNCC: 5 | RNVC: 2
25-555-6: RNCC: 5 | RNVC: 9

21 Mar 1983

5110-99-428-7607
Chisel And Gouge Handle

994287607
A3/10004: RNCC: 3 | RNVC: 2
F1FA14377: RNCC: 6 | RNVC: 9
BS1943: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-330-9548
Hand Masonry Drill

123309548
9425-10-200: RNCC: 3 | RNVC: 2
50085/JV10/200: RNCC: 5 | RNVC: 2

2 Mar 1993

5110-12-365-9245
Hand File

123659245
1-250-06-2-0: RNCC: 3 | RNVC: 2
7311518020408: RNCC: 5 | RNVC: 2

17 Feb 2005

5110-15-186-5851
Alesatore

151865851
310012/31.5-37: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-21-814-1237
Die Dimpling Body

218141237
ZT185301-3/32: RNCC: 3 | RNVC: 2
ZT185301-3-32: RNCC: 5 | RNVC: 2

13 Jun 1964

5110-15-217-5492
Lima Tonda Da 6

152175492
EXRI7905490: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-221-1236
Forbici Per Telefon

152211236
77161001: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-17-026-0480
Hand Wire Stripper

170260480
16810: RNCC: 3 | RNVC: 2

5 Oct 1969

5110-12-392-6522
Bearing Scraper

123926522
10670-265: RNCC: 3 | RNVC: 2
72060103: RNCC: 5 | RNVC: 2
72060003: RNCC: 5 | RNVC: 9

26 Jun 2013

5110-16-001-6672
Hand File

160016672
413111213025: RNCC: 3 | RNVC: 2

28 Feb 2002

5110-14-262-2327
Coffret Decoupoirs

142622327
MEKAN02: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-21-639-4804
File Holder

216394804
25: RNCC: 3 | RNVC: 2
472: RNCC: 3 | RNVC: 2
WM25: RNCC: 5 | RNVC: 2
BF775B: RNCC: 5 | RNVC: 9
257: RNCC: 5 | RNVC: 9
MT750748: RNCC: 6 | RNVC: 9

5 Feb 1964

5110-15-200-6408
Penna Elettrica

152006408
298.00LTF: RNCC: 3 | RNVC: 2
298.00LTF: RNCC: 5 | RNVC: 9
(241)A00I5298.00LTF: RNCC: 5 | RNVC: 9

14 Feb 2006

5110-25-125-2723

5110-14-282-8299

5110-25-131-0594
Barkespade

5110-13-108-1275
Single Bit Ax

131081275
607-1216: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-17-701-5702
Circle Cutter

177015702
NO PRIMARY REF 17-701-5702: RNCC: 3 | RNVC: 2

15 May 1970

5110-21-804-7204
Ice Chisel

218047204
A1290: RNCC: 3 | RNVC: 2
A18-12902A: RNCC: 5 | RNVC: 2

14 Jul 1964

5110-99-120-6137
Diagonal Cutting Pliers

991206137
BS3087-PART 7: RNCC: 4 | RNVC: 1
299-5 1-21N: RNCC: 5 | RNVC: 2
2990-140: RNCC: 5 | RNVC: 2
DEFSTAN51-10: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H5972: RNCC: 6 | RNVC: 9
H5972: RNCC: 6 | RNVC: 9
1B1206137: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-25-142-8906
File Handle

251428906
N-6071-01: RNCC: 3 | RNVC: 2
N-6070-05: RNCC: 6 | RNVC: 9

16 Jun 1993

5110-22-608-1142
Hand File

226081142
1-230-10-2-3: RNCC: 3 | RNVC: 2

9 Sep 2004

5110-15-123-3997
Cesoie Taglia Cavo

151233997
148-235: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-051-9731
Tapere Bastard File

990519731
NO PRIMARY REF 99-051-9731: RNCC: 3 | RNVC: 2
SP01: RNCC: 5 | RNVC: 2

1 Feb 1996

5110-21-888-3896
Firmer Chisel

218883896
5002C1-2: RNCC: 3 | RNVC: 2

10 Apr 1982

5110-15-193-0713
Portautensili E Bar

151930713
9725G: RNCC: 3 | RNVC: 2
(241)AA0039725G: RNCC: 5 | RNVC: 2

12 Apr 2010

5110-21-880-8296

5110-66-013-5534
Hand File

660135534
906150: RNCC: 3 | RNVC: 2
HANDFILE: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-14-300-2017

5110-21-851-4404
Punch And Die Punch

218514404
XX: RNCC: 3 | RNVC: 1
300000219: RNCC: 3 | RNVC: 2

6 Oct 1968

5110-21-859-1788

5110-15-213-9519
Serie Stampini Nume

152139519
SSTN40: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-105-2272
Hand Reamer Set

211052272
86A: RNCC: 3 | RNVC: 2
S51-038: RNCC: 5 | RNVC: 2
1F108000: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-66-149-7504
Hand File

661497504
NO PRIMARY REF 66-149-7504: RNCC: 3 | RNVC: 2
07085400: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-25-122-3479
Hand Metal Stamping Die Set

251223479
250-15MMAZ: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-21-639-4854
Hand File

216394854
FF769V: RNCC: 3 | RNVC: 2
39GP53: RNCC: 4 | RNVC: 1
5110-0664: RNCC: 5 | RNVC: 9

27 Jun 1966

5110-66-150-2252
Embroidery Scissors

661502252
NO PRIMARY REF 66-150-2252: RNCC: 3 | RNVC: 2
01014176: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-21-876-0208
Hand Metal Stamping Die Set

218760208
1568T12: RNCC: 3 | RNVC: 2
RS-332-D: RNCC: 3 | RNVC: 2
1568T120: RNCC: 5 | RNVC: 2
1568Y12: RNCC: 5 | RNVC: 9
3085: RNCC: 5 | RNVC: 9
3585: RNCC: 5 | RNVC: 9

26 Apr 1977

5110-12-311-3422
Cable Stripper Blade

123113422
109.40: RNCC: 3 | RNVC: 2
109.40: RNCC: 5 | RNVC: 2
4018061: RNCC: 5 | RNVC: 2
109.40: RNCC: 5 | RNVC: 9
10940: RNCC: 5 | RNVC: 9
857829030: RNCC: 5 | RNVC: 9
857829030-3: RNCC: 5 | RNVC: 9
18061: RNCC: 5 | RNVC: 9

20 Aug 1987

5110-25-124-3633
Hand Reamer

251243633
45-50X530FS5110-0684: RNCC: 2 | RNVC: 2
FS 5110-0684 POS 14: RNCC: 2 | RNVC: 2
KM: RNCC: 3 | RNVC: 2
TYPE K 45-55: RNCC: 3 | RNVC: 2
2370/13: RNCC: 3 | RNVC: 2
JUSTERBAR45-55MM: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-99-910-4072
Armourers Brace

999104072
H186: RNCC: 3 | RNVC: 2
BC3052: RNCC: 6 | RNVC: 9
204042: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-781-4684
De-Burring Tool

997814684
9350: RNCC: 3 | RNVC: 2

17 May 1988

5110-99-910-4848
Hand File

999104848
C00RDPATH778: RNCC: 2 | RNVC: 2
DEF1098: RNCC: 4 | RNVC: 1

25 Apr 1991

5110-15-123-9742
Mecchia Universale

151239742
H4516G: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-184-7321
Ferro Semplice Per

151847321
3IANSRSE60: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-158-8178

5110-15-136-3938
Taglierina 102X60x1

151363938
140182: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-208-5307
Lima

152085307
3LCNPKCNMDN200: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-120-5051
Coping Saw

991205051
DEF STAN 51-11 (PART 10): RNCC: 2 | RNVC: 2
H5900: RNCC: 6 | RNVC: 9
UK/DIS/2108-H.5900: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-211-2404
Pialletto Stayer

152112404
P75: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-228-9946

5110-15-212-6946
Utensili Orientabil

152126946
FBI14: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-214-8137
Manarini

152148137
MANARINI: RNCC: 5 | RNVC: 3

16 Nov 2005