What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 100 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 100of 112

5110-15-208-4764
Alesatore

152084764
3AAWFCFRDP7-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-150-5213
Knife Blade

661505213
NO PRIMARY REF 66-150-5213: RNCC: 3 | RNVC: 2
07196807: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-21-801-6353
Diagonal Cutting Pliers

218016353
39GP16: RNCC: 4 | RNVC: 1
10641HW: RNCC: 5 | RNVC: 2
252-6-SW: RNCC: 5 | RNVC: 2
REVC: RNCC: 6 | RNVC: 9
5110-0936: RNCC: 6 | RNVC: 9

9 Jun 1964

5110-66-150-0890
Crosscut Hand Saw

661500890
NO PRIMARY REF 66-150-0890: RNCC: 3 | RNVC: 2
01600260: RNCC: 5 | RNVC: 2

14 Apr 2003

5110-25-149-4801
Tau Kutter

251494801
WR 51: RNCC: 3 | RNVC: 2
5W BENCHMADE CUTTER: RNCC: 6 | RNVC: 9
WR 51: RNCC: 6 | RNVC: 9

9 Jul 2002

5110-15-217-6390
Ferro Da Pialletto

152176390
FERRODAPIALLETTO: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-957-6285
Cassette Cutter

999576285
903202: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-15-165-4006
Seghetto

151654006
200002: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-493-0027
Foret

144930027
4053 010 000 723: RNCC: 3 | RNVC: 2
F300 0T 009 4343: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-12-334-1258
Hand Wire Stripper

123341258
781-201190: RNCC: 3 | RNVC: 2
781201: RNCC: 5 | RNVC: 2

22 Mar 1994

5110-12-121-1078
Hand Cape Chisel

121211078
DIN6451-175: RNCC: 2 | RNVC: 2
246175: RNCC: 3 | RNVC: 2
3645-175: RNCC: 3 | RNVC: 2
107487: RNCC: 5 | RNVC: 2
246175: RNCC: 5 | RNVC: 9
180621: RNCC: 5 | RNVC: 9
3645L-175: RNCC: 5 | RNVC: 9
A175DIN6451: RNCC: 5 | RNVC: 9
DIN6451-A175: RNCC: 5 | RNVC: 9
DIN6451A175: RNCC: 5 | RNVC: 9

30 May 1969

5110-41-001-5435
Metal Cutting Hand Saw

410015435
5003-113: RNCC: 3 | RNVC: 2

23 Aug 2010

5110-66-150-1889
Hand Hacksaw Frame

661501889
NO PRIMARY REF 66-150-1889: RNCC: 3 | RNVC: 2
07250507: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-98-103-3156
Pipe Cutter

981033156
RECORD 204: RNCC: 3 | RNVC: 2
RECORD 204: RNCC: 6 | RNVC: 9

16 Dec 1974

5110-27-010-6613
Hand File

270106613
99999-NIIN-DA0014296: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-165-3658
Lima Ad Ago Taglio

151653658
26441605: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-3873
Spazzola Per Lime D

151653873
1736: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-3651
Lima Tonda Taglio B

151653651
25623D8: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-17-701-5887
Back Saw

177015887
SANDVIK308-12IN: RNCC: 3 | RNVC: 2
792-0101: RNCC: 5 | RNVC: 2

14 May 1970

5110-15-165-3668
Cesoia Lattoniere L

151653668
L707A: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-942-0183
Hand Reamer

999420183
BS122 PART 2: RNCC: 4 | RNVC: 1
BS122PT2: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-406-8138
Tube Cutter

144068138
338-2: RNCC: 3 | RNVC: 2

8 Jan 1986

5110-12-332-6919
Wire Stripper Blade

123326919
900362: RNCC: 3 | RNVC: 2
181273: RNCC: 5 | RNVC: 9
3421TEC: RNCC: 5 | RNVC: 9

7 Sep 1993

5110-12-329-8813
Hand Reamer

123298813
HSS012011-15: RNCC: 3 | RNVC: 2

8 Oct 1992

5110-98-105-3337
Hand File

981053337
TRIANGULAR,6IN: RNCC: 3 | RNVC: 2
TRIANGULAR,6IN: RNCC: 5 | RNVC: 9

23 Jan 1979

5110-15-188-9748
Scalpello Per Canal

151889748
2000072582: RNCC: 3 | RNVC: 2
(241)AA1362000072582: RNCC: 5 | RNVC: 2

11 Jan 2010

5110-15-230-8286
Tronchese

152308286
120-024: RNCC: 3 | RNVC: 2
511015E132340: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-99-721-6381
Cutting Tool

997216381
SPMM120408-370: RNCC: 3 | RNVC: 2

12 Feb 1986

5110-12-120-1987
Hand Bench Shears

121201987
5730702-850: RNCC: 3 | RNVC: 9
5110-11372: RNCC: 6 | RNVC: 9

30 May 1969

5110-12-174-0854
Diagonal Cutting Pliers

121740854
DIN5238-A110H-GERAUHT: RNCC: 2 | RNVC: 2
A110HDIN5238-GERAUHT: RNCC: 5 | RNVC: 2
106587: RNCC: 5 | RNVC: 9
2663: RNCC: 5 | RNVC: 9
DIN5238A110H-GERAUHT: RNCC: 5 | RNVC: 9

6 Jun 1978

5110-15-197-2546
Screw Thread Insert Breaker

151972546
PN UAS 00036351: RNCC: 3 | RNVC: 2
5120F76030559: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-27-019-8377
Hand Cape Chisel

270198377
10091KISK0016: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-237-6483
Roncola Mezzaluna

152376483
R/C/5: RNCC: 3 | RNVC: 2
511015E073895: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-22-210-7397
Pocket Knife

222107397
13703.3: RNCC: 3 | RNVC: 2

4 May 1984

5110-15-155-6116
Special Sfila Fermi

151556116
(241)A5682SFILAF.6: RNCC: 3 | RNVC: 2
SFILA F.6: RNCC: 3 | RNVC: 2

30 Apr 2002

5110-12-339-7810
Hand Graver

123397810
549600.7: RNCC: 3 | RNVC: 2

17 Jan 1996

5110-98-205-9672
Pipe Cutter

982059672
DFAMPD03224: RNCC: 2 | RNVC: 2

5 Dec 2003

5110-15-175-6567
Scalpello Falegname

151756567
1003/35: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-99-910-4975
Hand File

999104975
H896: RNCC: 2 | RNVC: 2
DEF1098: RNCC: 4 | RNVC: 1
H20878: RNCC: 5 | RNVC: 2
FA13636: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-802-4286
Hand Optical Fiber Stripper

998024286
AM25: RNCC: 3 | RNVC: 2

20 Mar 2001

5110-17-701-5810
Hand File

177015810
1352-250MM: RNCC: 3 | RNVC: 2

14 May 1970

5110-22-608-7008
Hand File

226087008
1-210-08-2-3: RNCC: 3 | RNVC: 2

13 Nov 2004

5110-22-617-8091
Crosscut Hand Saw

226178091
803-2-1808: RNCC: 3 | RNVC: 2

27 Aug 2008

5110-21-814-6441
Dimpling Die

218146441
ZT1853-1/4: RNCC: 3 | RNVC: 2
ZT1853-1-4: RNCC: 5 | RNVC: 2

13 Jun 1964

5110-12-131-4834
Reamer Blade Set

121314834
NO PRIMARY REF 12-131-4834: RNCC: 3 | RNVC: 2
200-52HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-149-8146
Hand Metal Cutting Shears

661498146
NO PRIMARY REF 66-149-8146: RNCC: 3 | RNVC: 2
07286306: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-22-221-3877
Hand File

222213877
2-303-16-1: RNCC: 3 | RNVC: 2

13 Dec 1972

5110-21-637-5690

5110-15-214-6342
Tagliavetro Autolub

152146342
TAGLIAVETR0: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-285-4863

5110-66-158-2992
Reamer Bar

661582992
502AMR288-3: RNCC: 3 | RNVC: 2
502AMR288-3: RNCC: 5 | RNVC: 2

29 Oct 2009

5110-27-011-3965
Hand File

270113965
99999-NIIN-DA0037167: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-21-105-2283
Hand Reamer Set

211052283
L49-070-302LC005: RNCC: 3 | RNVC: 2
S51-040: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-25-100-7592

5110-15-220-3378
Tagliavetro

152203378
220: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-98-202-6581
Hot Bla Rope Cutter

982026581
HSG 0: RNCC: 3 | RNVC: 2

29 Sep 1988

5110-15-219-5519
Trancino Copper Wir

152195519
TR 25-L: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-639-5707
Knockout Punch And Die

216395707
MS16323-3: RNCC: 2 | RNVC: 2
730: RNCC: 5 | RNVC: 1
1002433: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-25-102-3771

5110-14-407-8678

5110-99-544-8275

5110-21-889-5412
Compass Saw Blade

218895412
D-688: RNCC: 3 | RNVC: 2
D688: RNCC: 5 | RNVC: 2

14 Jun 1982

5110-17-101-5262
Hand File

171015262
1-111-05-2-0: RNCC: 3 | RNVC: 2
111-05-2: RNCC: 5 | RNVC: 2
111-05-2: RNCC: 5 | RNVC: 2

1 Jul 1987

5110-66-150-2250
Embroidery Scissors

661502250
NO PRIMARY REF 66-150-2250: RNCC: 3 | RNVC: 2
07620302: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-21-849-7975
Hand Masonry Drill

218497975
1280-18: RNCC: 3 | RNVC: 2
5110-0304: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-15-216-4959
Serie Stampini Nume

152164959
5LANPT10S3: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-216-2830
Pinza Per Elettroni

152162830
1177: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-218-1104
Lama Alternativa Bo

152181104
2.608.630.040: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-548-0574
H Valve Seat Cutter

995480574
UX12616AR: RNCC: 3 | RNVC: 2
734-934897: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-639-3122
Tailor's Shears

216393122
4B: RNCC: 3 | RNVC: 2
30512BC: RNCC: 3 | RNVC: 2
GGGS278: RNCC: 4 | RNVC: 1
6N: RNCC: 5 | RNVC: 2
7N: RNCC: 5 | RNVC: 2
5N: RNCC: 5 | RNVC: 9
REVA: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-14-331-5622

5110-15-232-3437
Tenaglie Mm.220

152323437
505-220: RNCC: 3 | RNVC: 2
2550: RNCC: 3 | RNVC: 2
511015E034555: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-13-118-0814
Knife Blade

131180814
391-360: RNCC: 3 | RNVC: 2
50102080: RNCC: 5 | RNVC: 2
400-3102-03: RNCC: 5 | RNVC: 2

21 Dec 2000

5110-99-383-4497
Second Cut File

993834497
NO PRIMARY REF 99-383-4497: RNCC: 3 | RNVC: 2
SP02: RNCC: 5 | RNVC: 2

1 Feb 1996

5110-21-880-8967
Bow Saw

218808967
8-23: RNCC: 3 | RNVC: 2
8523: RNCC: 5 | RNVC: 2
117-36-1: RNCC: 5 | RNVC: 2

3 Jul 1980

5110-14-544-9852
Diagonal Cutting Pliers

145449852
429.E: RNCC: 3 | RNVC: 2
8051546P00: RNCC: 5 | RNVC: 2

10 Mar 2005

5110-99-812-3664

5110-12-140-1388

5110-27-024-9755
Hand File

270249755
00124082: RNCC: 2 | RNVC: 1

22 Dec 2004

5110-15-220-4400
Tagliavetro

152204400
TAGLIAVETRO: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-220-5074
Lama Falciante

152205074
17163: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-105-1302

5110-15-237-4246
Roncola In Acciaio

152374246
00008213400: RNCC: 3 | RNVC: 2

27 Aug 2007

5110-22-304-1088

5110-22-306-4176
Sidecutting Pliers

223064176
8140: RNCC: 3 | RNVC: 2

13 Aug 1982

5110-99-724-8861
Metal Cutting Hand Saw

997248861
TL-502-245: RNCC: 3 | RNVC: 2

28 Nov 2007

5110-27-011-3970
Hand File

270113970
99999-NIIN-DA0037156: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-25-103-3316

5110-21-888-3793
Knockout Punch And Die

218883793
HDPS-4: RNCC: 3 | RNVC: 1

27 Feb 1982

5110-15-209-7058
Spatola Manicata Mm

152097058
ART.4896(MM50): RNCC: 5 | RNVC: 3

16 Nov 2005

5110-17-123-8079
Doos Kunststof

171238079
457180: RNCC: 3 | RNVC: 2

8 Jul 2011

5110-99-465-9925

5110-27-014-9666
Bearing Scraper

270149666
5120-77777-00015: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-99-614-2957
Hand Reamer

996142957
WG1303-2181-041WR66C: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-14-343-6989
Element Denude-Fils

143436989
1-63-000-08: RNCC: 3 | RNVC: 2

13 Jul 1977

5110-99-645-0901
Hand Reamer

996450901
WD01-10-90013WWS66E: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-14-261-3828
Travail Du B Bedane

142613828
28-6: RNCC: 3 | RNVC: 9

1 Jan 1970

5110-98-105-8741

5110-22-303-5301

5110-15-165-4216
Lama Per Seghetto L

151654216
539PA: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-209-2791
Lama Vidia

152092791
2/60: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-607-2886

5110-99-556-8813

5110-15-074-7487
Montante

150747487
38858-700: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-118-6906
Ice Ax

151186906
608.00X65CMLG: RNCC: 3 | RNVC: 2
608.00X65CMLG: RNCC: 5 | RNVC: 2

1 Jul 1994

5110-15-188-5415
Cesoia Da Giardino

151885415
MK116: RNCC: 3 | RNVC: 2
(241)AF120MK116: RNCC: 5 | RNVC: 2

5 Oct 2009

5110-15-212-0225
Lama Di Ricambio Pe

152120225
700505: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-17-124-6421
Pocket Knife

171246421
63903116011: RNCC: 3 | RNVC: 2

27 Nov 2012

5110-99-433-4742

5110-15-210-4740
Coltello Sguainacav

152104740
258: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-309-0780
Hand File

123090780
2403-160-3: RNCC: 3 | RNVC: 2
2192163: RNCC: 3 | RNVC: 2
2192-160-3: RNCC: 5 | RNVC: 2

11 Dec 1986

5110-12-131-2896
Hand File

121312896
DIN7261-B250-1: RNCC: 2 | RNVC: 2
3122251: RNCC: 3 | RNVC: 2
1122-250-1: RNCC: 3 | RNVC: 2
B250-1DIN7261: RNCC: 5 | RNVC: 2
1126-250-1: RNCC: 5 | RNVC: 9
C250X1DIN8333: RNCC: 5 | RNVC: 9
DIN7261B250-1: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-184-7349
Bedano

151847349
3QANFLM14: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-21-849-7492
Woodworking Butt Chisel

218497492
60: RNCC: 3 | RNVC: 1
16-612: RNCC: 3 | RNVC: 2
GGGC311: RNCC: 4 | RNVC: 1
105BC-3/4: RNCC: 5 | RNVC: 2
60C: RNCC: 5 | RNVC: 9
5110-0115: RNCC: 6 | RNVC: 9
REVB: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-21-849-7493
Woodworking Butt Chisel

218497493
60: RNCC: 3 | RNVC: 1
60C: RNCC: 3 | RNVC: 1
16-616: RNCC: 3 | RNVC: 2
GGGC311: RNCC: 4 | RNVC: 1
106BC-1: RNCC: 5 | RNVC: 2
5110-0116: RNCC: 6 | RNVC: 9
REVB: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-15-212-3635
Forbici Da Elettric

152123635
841-04-00: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-490-8670
Foret

144908670
4053 010 000 824: RNCC: 3 | RNVC: 2
F300 0T 000 4908: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-14-244-0788

5110-99-171-8962
Tamping Pad Assembl

991718962
100545: RNCC: 3 | RNVC: 2
0513Q-001: RNCC: 6 | RNVC: 9

6 Apr 2005

5110-15-126-1469
Serie Stampi Trafor

151261469
3679-2-25: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-21-637-4365

5110-99-910-5119
Gimlet

999105119
H1106: RNCC: 4 | RNVC: 1
FA13920: RNCC: 6 | RNVC: 9
1B2873: RNCC: 6 | RNVC: 9
9105119: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-137-5530
Cesoia Per Elettric

151375530
609-433: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-16-005-9559
Hand Hacksaw Blade

160059559
CSN222951-CR-24: RNCC: 2 | RNVC: 2
22 2951 CR-300X20-24Z: RNCC: 3 | RNVC: 2
050 29511: RNCC: 5 | RNVC: 2
CSN222951-300X20/24Z-CR: RNCC: 5 | RNVC: 9
CSN222951-300X20/24Z-CR: RNCC: 5 | RNVC: 9
CSN222951-CR-24: RNCC: 5 | RNVC: 9
22 2951 CR-300X20-24ZUBU/PALEC: RNCC: 5 | RNVC: 9

11 Mar 2008

5110-14-261-3830
Travail Du B Bedane

142613830
28-10: RNCC: 3 | RNVC: 9
C211E10: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-15-233-0768
Lama 18Mm A 8 Eleme

152330768
0-11-301/1PZ: RNCC: 3 | RNVC: 2

19 Jul 2007

5110-99-727-4042
Revolving Head Cutting Punch

997274042
2230-200: RNCC: 3 | RNVC: 2

1 May 2008

5110-98-106-7408
Craftsman's Knife

981067408
99E STANLEY: RNCC: 3 | RNVC: 2

23 Jun 1981

5110-15-197-5369
Chiave A Stella

151975369
PN UAS 00029170: RNCC: 3 | RNVC: 2
5110F76026945: RNCC: 5 | RNVC: 9

8 Apr 2004

5110-17-111-5472
Craftsman's Knife

171115472
554020: RNCC: 3 | RNVC: 2
554003: RNCC: 5 | RNVC: 2
KUNSTSTOFHOUDER,AFBREEKMES: RNCC: 5 | RNVC: 2

11 Feb 1998

5110-99-910-4950
Hand File

999104950
H871: RNCC: 2 | RNVC: 2
DEF1098: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-138-6690
Wire Stripper Blade

991386690
NO PRIMARY REF 99-138-6690: RNCC: 3 | RNVC: 2
45-1793-1: RNCC: 5 | RNVC: 2
SQ320: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-177-6355
Diagonal Cutting Pliers

151776355
188/160: RNCC: 3 | RNVC: 2

4 Jun 2004

5110-15-134-4437
Lama Legno Denti Gr

151344437
40099: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-12-368-1175
Hand Wire Stripper

123681175
KNI1211-180-TCS: RNCC: 3 | RNVC: 2

12 Dec 2005

5110-14-339-7978
Tube Cutter

143397978
08096-00: RNCC: 3 | RNVC: 2

18 Jan 1977

5110-14-289-1042
Double Bow Cutting Punch

142891042
214-46: RNCC: 3 | RNVC: 2
376-46: RNCC: 3 | RNVC: 2
4638-46: RNCC: 3 | RNVC: 9
345-11-46: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-21-639-6373
Scraping Knife

216396373
4209: RNCC: 3 | RNVC: 1
S3S: RNCC: 3 | RNVC: 2
S3S: RNCC: 3 | RNVC: 2
3S3: RNCC: 3 | RNVC: 2
10S-3: RNCC: 3 | RNVC: 2
300PS: RNCC: 5 | RNVC: 2
P23S: RNCC: 5 | RNVC: 2
1F116950: RNCC: 5 | RNVC: 9
D303: RNCC: 5 | RNVC: 9
P2: RNCC: 5 | RNVC: 9

4 Jun 1968

5110-21-903-2854
Chain Breaker

219032854
60: RNCC: 3 | RNVC: 2

30 Sep 1987

5110-13-114-8472
Hand Reamer

131148472
9996048-6: RNCC: 3 | RNVC: 2

26 Apr 1994

5110-15-183-4882
Trapano A Mano

151834882
COMM631003020065: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-66-013-7589
Hand Reamer

660137589
HAND REAMER: RNCC: 3 | RNVC: 1
650 4771: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-15-237-6904
Truciolare Tanganic

152376904
10931100/19: RNCC: 3 | RNVC: 2
511015E077668: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-211-7952
Utensile Dritto X F

152117952
UTFN20X12X125: RNCC: 5 | RNVC: 3
UTFN20X12X125: RNCC: 5 | RNVC: 9

16 Nov 2005

5110-99-773-7324
Pocket Folding Multi-Tool

997737324
CM037: RNCC: 3 | RNVC: 2

10 Apr 2003

5110-22-618-4002
Blacksmith's Chisel

226184002
786269: RNCC: 3 | RNVC: 2

10 Dec 2008

5110-98-103-3614

5110-14-351-7963

5110-17-108-4240
Bent Trimmers Shears

171084240
441089: RNCC: 3 | RNVC: 2

4 Oct 1994

5110-22-613-3820
End Cutting Nippers

226133820
4323068116: RNCC: 3 | RNVC: 2
7314150051076: RNCC: 5 | RNVC: 2

29 May 2006

5110-22-607-6226
Bow Saw Blade

226076226
28 830: RNCC: 3 | RNVC: 2

10 Jul 2004

5110-15-123-2448
Tromchese Con Manic

151232448
MM165: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-22-607-3415
Hand File

226073415
0352.0168.6146: RNCC: 3 | RNVC: 2

9 Jun 2004

5110-12-176-5048
Hand Metal Cutting Shears

121765048
2702A: RNCC: 3 | RNVC: 2

30 Nov 1978

5110-15-191-6473
Serie Caratteri Tip

151916473
CARATTINCLSR52: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-14-294-1027

5110-16-001-7261
Hand File

160017261
286211212025: RNCC: 3 | RNVC: 2

27 Mar 2002

5110-12-126-1499
Hand Reamer

121261499
NO PRIMARY REF 12-126-1499: RNCC: 3 | RNVC: 2
HRG7-5MM: RNCC: 5 | RNVC: 2
7-5DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-120-9471
Hand File

121209471
2407-200-3: RNCC: 3 | RNVC: 2
2132203: RNCC: 3 | RNVC: 2
E100X3DIN8342: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-129-3918
Hand Reamer

121293918
DIN859-B11-HSS: RNCC: 2 | RNVC: 2
302-B11: RNCC: 3 | RNVC: 2
415-11,00: RNCC: 3 | RNVC: 2
11606110: RNCC: 3 | RNVC: 2
011011-11: RNCC: 3 | RNVC: 2
11606HSS11: RNCC: 5 | RNVC: 2
11DIN859SCHNELLARBEITSSTAHLSPIR-: RNCC: 5 | RNVC: 9

30 May 1969

5110-25-120-8872
Hand File

251208872
160-10-2: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-12-127-0561
Bucksaw Blade

121270561
DIN7245-G700S: RNCC: 2 | RNVC: 2
G700SDIN7245: RNCC: 5 | RNVC: 2
DIN7245-G700: RNCC: 5 | RNVC: 9
DIN7245G700: RNCC: 5 | RNVC: 9
G550DIN7245: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-170-3867
Hand File

121703867
A125X1DIN8335: RNCC: 2 | RNVC: 9
2006-125H1: RNCC: 3 | RNVC: 9
4286-125H1: RNCC: 3 | RNVC: 9

8 Jul 1977

5110-99-910-5281
Craftsman's Knife

999105281
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H1511: RNCC: 5 | RNVC: 9

25 Apr 1991

5110-12-126-4821
Two Man Crosscut Saw

121264821
NO PRIMARY REF 12-126-4821: RNCC: 3 | RNVC: 2
624-1000A: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-812-6419
Hand Hacksaw Blade

218126419
NO PRIMARY REF 21-812-6419: RNCC: 3 | RNVC: 2

18 Mar 1964

5110-99-215-3042
Ha Bearing Assembly

992153042
AOGBHJRW22-250/002: RNCC: 3 | RNVC: 2
AOGB40410: RNCC: 5 | RNVC: 1
7771165: RNCC: 6 | RNVC: 9
TT-777-1165: RNCC: 6 | RNVC: 9

6 Aug 1992

5110-12-182-6728
Draw Knife

121826728
652C103-300: RNCC: 3 | RNVC: 9
5427-300: RNCC: 5 | RNVC: 9
5865-300: RNCC: 5 | RNVC: 9
3372-300: RNCC: 5 | RNVC: 9

20 Feb 1980

5110-99-910-5688
Hollo Cutting Punch

999105688
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 5 | RNVC: 9
DL9A-H2047: RNCC: 5 | RNVC: 9
H2047: RNCC: 6 | RNVC: 9
1B3012: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-184-7373
Raspa

151847373
3RFLPQCNMDN245: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-143-4731
Spatola Con Lama Ri

151434731
9154-40: RNCC: 3 | RNVC: 2
9154.00.040: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-14-421-7805
Hand Metal Cutting Shears

144217805
181-22: RNCC: 3 | RNVC: 2
181-22: RNCC: 5 | RNVC: 9
18-1-22: RNCC: 5 | RNVC: 9

27 Jan 1988

5110-15-208-3257
Alesatore

152083257
3AANGERMLN12X13-5X75: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-061-3895

5110-66-061-3817

5110-37-180-1111

5110-15-218-2909
Pinza Per Elettroni

152182909
LA120030: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-012-0988
Firmer Chisel

660120988
16-714: RNCC: 3 | RNVC: 2
5 1-8IN X 7-8IN: RNCC: 3 | RNVC: 2
16-146: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-15-208-4637
Fustella

152084637
3FANGRF03: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-17-701-3856
Scraping Knife

177013856
NO PRIMARY REF 17-701-3856: RNCC: 3 | RNVC: 2
003011: RNCC: 5 | RNVC: 2
ERNST NEUHAUS SOEHNE 502 80MM: RNCC: 5 | RNVC: 2

31 Aug 1970

5110-27-044-0956
Diagonal Cutting Pliers

270440956
160 MM: RNCC: 2 | RNVC: 1
MD-0000-2322/09: RNCC: 2 | RNVC: 1

7 Jan 2009

5110-15-123-6442
Lima Con Manico Mez

151236442
2601/3-10: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-126-1454
Hand Reamer

121261454
NO PRIMARY REF 12-126-1454: RNCC: 3 | RNVC: 2
17DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-211-9469
Attrezzo Anuba Per

152119469
NOOREF: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-215-5147
Hand File

992155147
250390: RNCC: 3 | RNVC: 2
CFS6: RNCC: 5 | RNVC: 2

15 Feb 1995

5110-98-107-7130
Hand Reamer

981077130
PARALLEL27/64X2-1/2X5IN.: RNCC: 3 | RNVC: 2

8 Feb 1984

5110-25-101-7036
Craftsman's Knife

251017036
FS 5110-0702 POS 1: RNCC: 2 | RNVC: 2
70MMLG: RNCC: 5 | RNVC: 1
211 9010: RNCC: 5 | RNVC: 2
211-9010: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-98-105-8756
Hand Reamer

981058756
NO PRIMARY REF 98-105-8756: RNCC: 3 | RNVC: 2
METRIC 2003-9.5MM: RNCC: 5 | RNVC: 2

30 May 1978

5110-12-131-7003
Ha Fuehrungsbuchse

121317003
140.09.600: RNCC: 3 | RNVC: 2
200-49: RNCC: 5 | RNVC: 9
200-49V9-4-10: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-368-0103
File Handle

123680103
FH2-10: RNCC: 3 | RNVC: 2

18 Nov 2005

5110-22-304-0212

5110-21-868-1703
Hand Graver

218681703
GS210: RNCC: 3 | RNVC: 2

15 Dec 1972

5110-66-017-4677
Cylinder Ridge Reamer

660174677
851300: RNCC: 3 | RNVC: 2
851300: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-22-601-7180
Hand Cold Chisel

21 Oct 2002

5110-12-126-1382
Double Bow Cutting Punch

121261382
DIN7200-A16: RNCC: 2 | RNVC: 2
240-16: RNCC: 3 | RNVC: 2
TS5110-0821: RNCC: 5 | RNVC: 1
00.09.01.28: RNCC: 5 | RNVC: 2
240075: RNCC: 5 | RNVC: 2
A16DIN7200: RNCC: 5 | RNVC: 2
TS5110-0821-16MM: RNCC: 5 | RNVC: 2
DIN7200A16: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-849-7494
Woodworking Butt Chisel

218497494
60: RNCC: 3 | RNVC: 1
60C: RNCC: 3 | RNVC: 1
GGG-C-311: RNCC: 5 | RNVC: 2
5110-0117: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-15-165-3884
Forbice

151653884
1122000: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-66-011-0376
Single Bit Ax Handle

660110376
AS 1729: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-99-977-7692
Wire Stripper Blade

999777692
L5436: RNCC: 3 | RNVC: 2
L5436M0D: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-978-1140
Hand Operated Wire Rope Cutter

999781140
95958: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-15-183-8688
Lime Diverse

151838688
COMM631018020067: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-133-4542
Fraeswerkzeug

121334542
518589006600: RNCC: 3 | RNVC: 2
5185890066: RNCC: 3 | RNVC: 2
044M00500: RNCC: 5 | RNVC: 2

30 May 1969

5110-14-268-6320

5110-99-958-0392
Hand Reamer

999580392
NO PRIMARY REF 99-958-0392: RNCC: 3 | RNVC: 2
025538: RNCC: 5 | RNVC: 2

26 Nov 2004

5110-15-208-4810
Alesatore Cilindr.

152084810
3AAXFCFRDP3-1: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-158-7109
Hand Reamer

661587109
TF01530-7: RNCC: 3 | RNVC: 2

23 Jun 2010

5110-21-920-1401
Hand File

219201401
73-14100: RNCC: 3 | RNVC: 2
MSND04: RNCC: 3 | RNVC: 2
73-14100: RNCC: 5 | RNVC: 2

25 May 1999

5110-15-185-5887
Morsetto A C

151855887
9964: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-120-0915
Drill Masonry Bit

991200915
H5379: RNCC: 2 | RNVC: 2
FA15430: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-22-304-2844

5110-15-190-9319
Tranciacavi

151909319
569: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-165-4101
Portalime Per Lime

151654101
26272260: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-66-158-0328
Hand Reamer Set

661580328
UCT 090243: RNCC: 3 | RNVC: 2

26 Jun 2009

5110-14-244-0725

5110-27-001-2876
Drilling Post

270012876
204-030-666-1: RNCC: 3 | RNVC: 2

18 Oct 1994

5110-17-110-7387
Hand Reamer

171107387
P926-0,3910-0,3750: RNCC: 3 | RNVC: 2
P926: RNCC: 6 | RNVC: 9

18 Feb 1997

5110-22-123-2910
Craftsman's Knife

221232910
L-11YE: RNCC: 3 | RNVC: 2

26 Oct 1995

5110-15-184-7324
Ferro A Denti Per P

151847324
3IANDTCN48: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-215-3992
Flessometro 3 Mt. P

152153992
196A0002: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-805-7567

5110-21-804-7208

5110-33-190-2480

5110-15-238-4166
Cesoia Tubi Rems Ro

152384166
039204: RNCC: 3 | RNVC: 2
511015E146385: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-25-115-1907
Risse Meisel

251151907
RISSEMEISELF0RH0VSLAGER: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-99-910-9992
Hand Reamer

999109992
BS122PT2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
1/8"PARALLEL HAND REAMER: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-779-0834
Hand Reamer

997790834
NO PRIMARY REF 99-779-0834: RNCC: 3 | RNVC: 2
TS526: RNCC: 5 | RNVC: 2
FJ1931-3: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-105-0000
Pipe Cutter

211050000
1A: RNCC: 3 | RNVC: 2
39GP49: RNCC: 4 | RNVC: 1
02801: RNCC: 5 | RNVC: 2
313971: RNCC: 6 | RNVC: 9
313971-1: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-27-045-1052
Hand Cape Chisel

270451052
L50-30: RNCC: 2 | RNVC: 1

7 Apr 2009

5110-19-005-0950
Single Bit Ax Handle

190050950
11017040: RNCC: 3 | RNVC: 2

30 Nov 2012

5110-66-019-7347
Hand Reamer

660197347
HAND REAMER: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-15-209-4988
Coltello Multiuso

152094988
COMU: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-25-103-5099

5110-25-103-3214

5110-27-035-3222
Kayis Zimba Takimi

270353222
360/7: RNCC: 2 | RNVC: 1

8 Mar 2007

5110-13-103-1024
Half Hatchet

131031024
170: RNCC: 3 | RNVC: 2
170: RNCC: 3 | RNVC: 9

1 Apr 1975

5110-12-126-3189

5110-15-137-5637
Serie Estrattori Si

151375637
2863-1/5: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-214-7162
Curvatubi

152147162
2155-3-10: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-179-6822
Hand Metal Cutting Shears

991796822
M-7R: RNCC: 3 | RNVC: 2
1C-8837: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-289-1041
Double Bow Cutting Punch

142891041
214-40: RNCC: 3 | RNVC: 2
376-40: RNCC: 3 | RNVC: 2
4638-40: RNCC: 3 | RNVC: 9
345-11-40: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-66-013-5498
Hand File

660135498
NO PRIMARY REF 66-013-5498: RNCC: 3 | RNVC: 2
07088504: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-15-208-3149
Alesatore

152083149
3AAXFCFRDP9-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-25-116-3601
Bow Saw Blade

251163601
GLEFS3FT: RNCC: 3 | RNVC: 2
203315-1: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-15-136-3696
Lama Di Ricambio Pe

151363696
2037-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-21-105-1685
Craftsman's Knife

211051685
REF NOT ON FILE: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-200-2283
Coltello Galleggian

152002283
610748: RNCC: 3 | RNVC: 2
(241)A8007610748: RNCC: 5 | RNVC: 2

8 Nov 2005

5110-98-104-9956
Single Bit A Handle

5110-99-717-0789
Hand Reamer

997170789
FD9997: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-14-244-0792

5110-12-121-4108
Hand File

121214108
DIN7261-B300-1: RNCC: 2 | RNVC: 2
1122-300-1: RNCC: 3 | RNVC: 2
3122301: RNCC: 3 | RNVC: 2
1122-300-1: RNCC: 5 | RNVC: 2
B300-1DIN7261: RNCC: 5 | RNVC: 2
DIN7261B300-1: RNCC: 5 | RNVC: 9
C300X1DIN8333: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-490-8951
Cisaill

144908951
4067 420 001 339: RNCC: 3 | RNVC: 2
F300 0T 000 5231: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-14-244-0823

5110-99-306-2502

5110-12-132-1958

5110-15-141-1940
Raschietto Multiuso

151411940
0-28-590: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-170-3112
Hand Rasp

121703112
DIN7263-C200-1: RNCC: 2 | RNVC: 2
1552201: RNCC: 3 | RNVC: 2
1552-200-1: RNCC: 3 | RNVC: 2
19138-200-1: RNCC: 3 | RNVC: 2
C200-1DIN7263: RNCC: 5 | RNVC: 2

7 Jul 1977

5110-15-236-0923
Set Lime Pz.5

152360923
198-5255: RNCC: 3 | RNVC: 2
511015E119349: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-12-126-2014
Nozzle Broach

121262014
162000-1,2: RNCC: 3 | RNVC: 2
1620-1-2: RNCC: 5 | RNVC: 2
235-1-2: RNCC: 5 | RNVC: 9
W446-1-2: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-126-2189
Hand Metal Stamping Die Set

121262189
TL5110-0028-100: RNCC: 2 | RNVC: 2
62400080: RNCC: 3 | RNVC: 2
36808: RNCC: 5 | RNVC: 9
330-8: RNCC: 5 | RNVC: 9
330008: RNCC: 5 | RNVC: 9
DIN7353-SATZARAB-8: RNCC: 5 | RNVC: 9
TK-KG55-5110-480-100: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-893-1170
Metal Cutting Hand Saw

218931170
HS-8: RNCC: 3 | RNVC: 2

11 Jun 1983

5110-22-304-2925

5110-15-218-0231
Raschietto E Lime

152180231
448: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-16-005-7821
Hand File

160057821
505 69 81-48: RNCC: 3 | RNVC: 2
505698148: RNCC: 5 | RNVC: 2

17 Oct 2007

5110-12-332-8201
Hand Wire Stripper

123328201
5-181: RNCC: 3 | RNVC: 2
1223: RNCC: 3 | RNVC: 2
01223013030: RNCC: 5 | RNVC: 2

23 Sep 1993

5110-22-603-7271
Hand File

226037271
LA 2410 HIEB 3 140MM: RNCC: 3 | RNVC: 2

13 May 2003

5110-15-189-9804
Cutter A Lama Retra

151899804
017720005: RNCC: 3 | RNVC: 2
1772B: RNCC: 3 | RNVC: 2
(241)A0873017720005: RNCC: 5 | RNVC: 2

1 Mar 2010

5110-99-122-7457
Hand Reamer

991227457
BS122PT2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-122-2560
Hand Reamer

121222560
2-0SPIRALGENUTET: RNCC: 3 | RNVC: 2

30 May 1969

5110-14-530-3360
Cutting Punch Insert

145303360
245A.T38: RNCC: 3 | RNVC: 2
3148511586204: RNCC: 5 | RNVC: 2

31 May 2002

5110-14-378-2674
Hand Metal Cutting Shears

143782674
2845-22: RNCC: 3 | RNVC: 2
140-22: RNCC: 5 | RNVC: 2

20 Jul 1982

5110-15-136-2409
Trapano A Mano A Du

151362409
1083-13: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-21-639-5240
Hand Diamond Point Chisel

216395240
632: RNCC: 3 | RNVC: 1
PPC19: RNCC: 3 | RNVC: 2
39GP43: RNCC: 4 | RNVC: 1
350-1/8: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-14-232-4825

5110-17-122-0288
Hand Optical Fiber Stripper

171220288
D-GA-00010: RNCC: 3 | RNVC: 2

24 Mar 2009

5110-15-221-9289
Scalpello Per Legno

152219289
1031-20: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-232-4664
Spatola Acciaio 60M

152324664
SM1: RNCC: 3 | RNVC: 2
6: RNCC: 3 | RNVC: 2
511015E045770: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-34-041-8515
Crosscut Hand Saw

340418515
0000000203906: RNCC: 3 | RNVC: 2
MF1 20390-6: RNCC: 6 | RNVC: 9

4 Apr 2012

5110-13-102-8828
Chisel And G Handle

5110-17-026-8982
Hand File

170268982
TVA5110-2-263-007.1.1.7: RNCC: 3 | RNVC: 2
TVA5110-2-263-007: RNCC: 5 | RNVC: 1

17 Jun 1972

5110-15-220-2104
Forbice Per Elettri

152202104
1-84-280: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-195-0976
Pocket Folding Multi-Tool

151950976
BLPMT12: RNCC: 3 | RNVC: 2
(241)A5200BLPMT12: RNCC: 5 | RNVC: 2

25 Feb 2011

5110-25-128-9246
Firmer Chisel

251289246
HK394: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-22-603-7273
Hand File

226037273
LA 2411 HIEB 3 140MM: RNCC: 3 | RNVC: 2

13 May 2003

5110-15-175-6254
Lama X Seghetto Alt

151756254
254071: RNCC: 3 | RNVC: 2
254071: RNCC: 5 | RNVC: 9

14 Feb 2004

5110-15-208-4805
Alesatore Cilindr.

152084805
3AAXFCFRDP2-6: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-230-3969
Gimlet

152303969
1378/5: RNCC: 3 | RNVC: 2
511015E060498: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-25-140-2767
Sheet Metal Ripping Cutter

251402767
534250/FLM 250: RNCC: 3 | RNVC: 2

5 Sep 1991

5110-33-155-9569
Firmer Chisel

331559569
118.115/1: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-99-910-9988
Hand Reamer

999109988
BS122 PART 2: RNCC: 4 | RNVC: 1
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16265: RNCC: 6 | RNVC: 9
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-849-8180
Hand File

218498180
914139: RNCC: 3 | RNVC: 2
39GP30: RNCC: 4 | RNVC: 1
14139: RNCC: 5 | RNVC: 2
5110-0538: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-98-102-2113
Hand Hacksaw Blade

981022113
250MM 24TPI BI-METAL: RNCC: 3 | RNVC: 1
1024 RABONE: RNCC: 3 | RNVC: 2
FH1024 ECLIPSE: RNCC: 6 | RNVC: 9

1 Jun 1990

5110-12-360-4474
Hand File Set

123604474
2-472-16-1-0: RNCC: 3 | RNVC: 2

21 May 2003

5110-15-123-6404
Lima Fresatrice Con

151236404
2610/2-12: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-66-014-9439
Hand Hacksaw Blade

660149439
BS 1919: RNCC: 3 | RNVC: 1
15-856: RNCC: 3 | RNVC: 2
HSH3212: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-66-016-5063
Rolling Tool Shoe

660165063
134400: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-21-800-6732
Craftsman's Knife

218006732
K1: RNCC: 3 | RNVC: 2

5 Feb 1964

5110-15-208-4643
Fustella

152084643
3FANGRF09: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-137-9131
Scalpello Piatto Mm

151379131
0034001: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-305-8305
Knockout Punch And Die

123058305
18.521.3: RNCC: 3 | RNVC: 2
74331213: RNCC: 3 | RNVC: 9

19 Dec 1985

5110-99-910-9977
Hand Reamer

999109977
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16243: RNCC: 6 | RNVC: 9
10136: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-43-001-1609
Pocket Folding Multi-Tool

430011609
VICTORINOX ATLAS (0.9033): RNCC: 3 | RNVC: 2

24 Jan 2011

5110-12-131-7000
Ha Fuehrungsbuchse

121317000
140.06.400: RNCC: 3 | RNVC: 2
200-46: RNCC: 5 | RNVC: 9
200-46V7-9-8-5: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-129-3908
Hand Reamer

121293908
DIN859-B16-HSS: RNCC: 2 | RNVC: 2
415-16,00: RNCC: 3 | RNVC: 2
11606160: RNCC: 3 | RNVC: 2
011011-16: RNCC: 3 | RNVC: 2
11606HSS16: RNCC: 5 | RNVC: 2
16DIN859SCHNELLARBEITSSTAHLSPIR-: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-126-1735
Woodcarving Gouge

121261735
NO PRIMARY REF 12-126-1735: RNCC: 3 | RNVC: 2
5110-0024-44: RNCC: 5 | RNVC: 9
5110-024-44: RNCC: 5 | RNVC: 9
TL5110-0024-44: RNCC: 5 | RNVC: 9
2573-39-5MM: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-150-5748
Pocket Folding Multi-Tool

661505748
NO PRIMARY REF 66-150-5748: RNCC: 3 | RNVC: 2
00843642: RNCC: 5 | RNVC: 2

16 Apr 2003

5110-66-150-2141
Hand Hacksaw Blade

661502141
NO PRIMARY REF 66-150-2141: RNCC: 3 | RNVC: 2
09741111: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-66-150-4673
File Handle

661504673
NO PRIMARY REF 66-150-4673: RNCC: 3 | RNVC: 2
05058166: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-15-192-5007
Ricambio Coltelli A

151925007
3300014: RNCC: 3 | RNVC: 2
(241)AJ2363300014: RNCC: 5 | RNVC: 2

22 Mar 2010

5110-15-231-4835
Utensile A Punta

152314835
PBA2-18: RNCC: 3 | RNVC: 2
511015E141826: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-17-044-4441
M Schraapstaalstift

170444441
910.02.701: RNCC: 3 | RNVC: 2
01.82.14.75: RNCC: 5 | RNVC: 2
910.02.701: RNCC: 5 | RNVC: 2
B70: RNCC: 5 | RNVC: 2

16 Sep 1974

5110-15-208-4762
Alesatore

152084762
3AAWFCFRDP16-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-887-7487
Concret Hand Chisel

218877487
84-1: RNCC: 3 | RNVC: 2

9 Jan 1982

5110-15-217-5482
Lima Mezza Tonda 10

152175482
EXRI7903482: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-244-3703

5110-99-942-0152
Hand Reamer

999420152
BS122 PART 2: RNCC: 4 | RNVC: 1
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16344: RNCC: 6 | RNVC: 9
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-175-6255
Lama Per Sega Dirit

151756255
328809: RNCC: 3 | RNVC: 2
328809: RNCC: 5 | RNVC: 9

14 Feb 2004

5110-15-184-7308
Falciola

151847308
NSN511015R556934: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-434-7269
Cutter Spring Punch

994347269
1C1865: RNCC: 3 | RNVC: 2
F1FA16048: RNCC: 6 | RNVC: 9
F1FA16048: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-149-7554
Hand File

661497554
NO PRIMARY REF 66-149-7554: RNCC: 3 | RNVC: 2
07087806: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-66-025-9977
Diagonal Cutting Pliers

660259977
PW562: RNCC: 3 | RNVC: 2
70-02-180: RNCC: 5 | RNVC: 2
28221: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-12-139-2505
Re Fuehrungsbuchse

121392505
F6375378: RNCC: 3 | RNVC: 2
044M01102: RNCC: 3 | RNVC: 2
VA52820-2: RNCC: 5 | RNVC: 2

30 May 1969

5110-17-044-4438
Bearing Scraper Set

170444438
SET B: RNCC: 3 | RNVC: 2
02.20.15.93: RNCC: 5 | RNVC: 2
F43420001: RNCC: 5 | RNVC: 2
910.02.000: RNCC: 5 | RNVC: 2
SET B: RNCC: 5 | RNVC: 2
910.02.000: RNCC: 5 | RNVC: 2

16 Sep 1974

5110-15-137-8351
Serie 5 Lime

151378351
2568-5/6: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-21-639-4826
File Handle

216394826
4: RNCC: 3 | RNVC: 2
4: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-214-9935
Impugnature Portali

152149935
2698/3-95: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-139-2272
Hand Reamer

991392272
FV886354-4: RNCC: 3 | RNVC: 2
FV886354-4: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-120-0917

5110-99-120-0910

5110-99-445-7977

5110-99-122-7950
Plane Cutter Bit

5110-99-445-6497

5110-33-108-3593
Electricians' Scissors

331083593
76901-127/5: RNCC: 3 | RNVC: 2

28 Feb 2001

5110-12-126-1491
Hand Reamer

121261491
NO PRIMARY REF 12-126-1491: RNCC: 3 | RNVC: 2
5-4DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-569-7949
Fireman's Strap Cutting Knife

145697949
84.1.135: RNCC: 3 | RNVC: 2

20 Oct 2011

5110-15-123-2529
Cesoia Lamiera Tagl

151232529
2091-5: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-209-6684
Cassetta Per Bordat

152096684
2432/8: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-384-8158
Horseshoer's Clinch Cutter

123848158
53.000.040: RNCC: 3 | RNVC: 2
51.000.044: RNCC: 3 | RNVC: 2
51.000.044: RNCC: 5 | RNVC: 2
53.000.040: RNCC: 5 | RNVC: 2

31 Mar 2011

5110-14-266-7015

5110-12-156-1647
Double Bow Cutting Punch

121561647
M179-12: RNCC: 3 | RNVC: 2
M179-12: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-192-5186
Single Bit Ax

151925186
A.22755-P3: RNCC: 3 | RNVC: 2
(241)A7904A.22755-P3: RNCC: 5 | RNVC: 2

24 Mar 2010

5110-15-210-4362
Lima Tonda Taglio M

152104362
12500602: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-639-6445
Bearing Scraper

216396445
E: RNCC: 3 | RNVC: 1
1F116880: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-15-232-9366
Pinza Spelafili

152329366
174.5: RNCC: 3 | RNVC: 2
511015E071668: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-21-639-5647
Hand Metal Cutting Punch And Die Set

216395647
5: RNCC: 3 | RNVC: 1
310050281: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-165-4124
Lima Ad Ago 160 Mm.

151654124
1720006: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-137-9544
Forbice Da Elettric

151379544
1128001: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-19-001-6458
Claw Hatchet

190016458
4300-01 3 1/2INX700GM: RNCC: 3 | RNVC: 2

23 Jun 2006

5110-99-358-5900
Knife Blade

993585900
NO PRIMARY REF 99-358-5900: RNCC: 3 | RNVC: 2
T0959-10: RNCC: 5 | RNVC: 2
GRC-011576-FP: RNCC: 5 | RNVC: 2

20 Apr 2009

5110-15-123-6443
Lima Con Manico Ton

151236443
2602/1-12: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-105-9132
Sarto Forbici

151059132
2/20690-20.03.69-01: RNCC: 3 | RNVC: 2

30 May 1989

5110-33-155-9583
Firmer Chisel

331559583
119.130/1: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-12-010-5193

5110-15-215-5334
Taglierino

152155334
70184700: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-490-8842
Alesoir

144908842
4067 010 000 310: RNCC: 3 | RNVC: 2
F300 0T 000 5114: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-99-728-1865
Knife Blade Handle

997281865
N04: RNCC: 3 | RNVC: 2

6 Feb 1987

5110-14-201-7240

5110-25-119-9445
Hand Operated Cable Cutter

251199445
2520: RNCC: 3 | RNVC: 2
LE138: RNCC: 5 | RNVC: 2
70562000: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-99-461-9702
Valve Seat Tool

994619702
NO PRIMARY REF 99-461-9702: RNCC: 3 | RNVC: 2
HP253: RNCC: 5 | RNVC: 2
27Z1039: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-637-5688
Hand Reamer

216375688
B174-2: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1

6 Jun 1968

5110-15-232-1060
Spatola Raschiaghia

152321060
2094.0: RNCC: 3 | RNVC: 2
511015E130911: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-12-122-2517
Hand Reamer

121222517
513A103SS3-8: RNCC: 3 | RNVC: 2

30 May 1969

5110-99-784-7237
Wire Wrap Head

997847237
CSWB-9: RNCC: 3 | RNVC: 2
OK-CSWB-9: RNCC: 5 | RNVC: 2
01-5016: RNCC: 5 | RNVC: 2
1M2088: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-25-123-1668

5110-99-715-1717

5110-99-127-5131
Tailor's Shears

991275131
TDS51-F127: RNCC: 2 | RNVC: 2
1920-8": RNCC: 5 | RNVC: 2
0451-3523: RNCC: 6 | RNVC: 9
1C5814: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-123-9984
Wood Scraper

121239984
DIN7226-0-8: RNCC: 2 | RNVC: 2
59-0-8: RNCC: 3 | RNVC: 2
0-8DIN7226: RNCC: 5 | RNVC: 2
60DIN7226: RNCC: 5 | RNVC: 9
59-0-8: RNCC: 5 | RNVC: 9
1021-0-8: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-199-0775
Double Bow Cutting Punch

151990775
3703-41: RNCC: 3 | RNVC: 2
C3703-41: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-21-639-5956
Chisel And Gouge Handle

216395956
Q: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-14-488-3050
Diagonal Cutting Pliers

144883050
405.10RMT: RNCC: 3 | RNVC: 2
0175165: RNCC: 5 | RNVC: 2
3148511751657: RNCC: 5 | RNVC: 2
405-10RMT: RNCC: 5 | RNVC: 2
194-2450: RNCC: 5 | RNVC: 2

29 Apr 1997

5110-27-011-7684
Hand Reamer

270117684
09013KR1010: RNCC: 2 | RNVC: 1
TS 78/3 17 MM: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-99-292-4643
Protective Ring

992924643
MC1278011: RNCC: 3 | RNVC: 2

17 May 2002

5110-15-138-0792
Troncabulloni (195N

151380792
195003: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-98-207-5057
Two-Man Cross Blade

982075057
6FT PEG WORKSAW1: RNCC: 3 | RNVC: 2

19 Jul 2011

5110-15-191-2732
Inserto Per Utensil

151912732
COD-CTBPR: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-21-866-8846

5110-21-866-8554

5110-12-126-3071

5110-12-199-0029
Brick Chisel

121990029
6622.11-600: RNCC: 3 | RNVC: 2
57125-3-0: RNCC: 5 | RNVC: 2

20 Mar 1984

5110-98-104-4692
Hand Metal Cutting Punch And Die

981044692
NO PRIMARY REF 98-104-4692: RNCC: 3 | RNVC: 2
1961: RNCC: 5 | RNVC: 2

30 May 1973

5110-21-889-5776
Wire Stripper Blade

218895776
GA116-2W-A: RNCC: 3 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

27 Jun 1982

5110-21-637-5740
Hand Reamer

216375740
B94-2: RNCC: 3 | RNVC: 1
50-11149: RNCC: 3 | RNVC: 2
B174-2: RNCC: 4 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1

4 Jun 1968

5110-12-120-6907
Hand Rasp

121206907
DIN7263-C150-2: RNCC: 2 | RNVC: 2
19138-150-2: RNCC: 3 | RNVC: 2
1552-150-2: RNCC: 3 | RNVC: 2
1552152: RNCC: 3 | RNVC: 2
C150-2DIN7263: RNCC: 5 | RNVC: 2
B150X2DIN8334R: RNCC: 5 | RNVC: 9
DIN7263C150-2: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-214-1751
Stampi Traforati Mm

152141751
K3679-1-60: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-385-3351
Craftsman's Knife

123853351
51.000.046B: RNCC: 3 | RNVC: 2
53.000.042: RNCC: 3 | RNVC: 2
51.000.046B: RNCC: 5 | RNVC: 2
53.000.042: RNCC: 5 | RNVC: 2

24 May 2011

5110-12-345-8408
Sealing Surface Milling Cutter

123458408
222.50.000: RNCC: 3 | RNVC: 2
150020: RNCC: 3 | RNVC: 2
150 020: RNCC: 5 | RNVC: 9

5 May 1998

5110-15-207-1817
Punzone Metalli Log

152071817
PUNZ-EI: RNCC: 3 | RNVC: 2
(241)AJ222PUNZ-EI: RNCC: 5 | RNVC: 2

19 Sep 2012

5110-14-266-5741

5110-21-883-1732
Riffler

218831732
STYLE6: RNCC: 3 | RNVC: 1
941054: RNCC: 5 | RNVC: 2

27 Jan 1981

5110-14-331-5613

5110-99-910-4188
Hand Diamond Point Chisel

999104188
DEFSTAN51-11PT29: RNCC: 4 | RNVC: 1
BS3066-TABLE 6: RNCC: 4 | RNVC: 1
FA11207: RNCC: 6 | RNVC: 9
9104188: RNCC: 6 | RNVC: 9
1A3829: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-410-8016
Couteau Universel

144108016
845: RNCC: 3 | RNVC: 2

9 Jul 1986

5110-21-639-6478
Bearing Scraper Set

216396478
AKH53: RNCC: 3 | RNVC: 2
AKH53: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-13-104-4774
Blade Rr Hacksaw

131044774
30411606518100: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-15-137-9913
Attrezzo Bordatubi

151379913
351C*: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-166-9721
Wire Stripper Blade

121669721
2530L0-5-0-6: RNCC: 3 | RNVC: 2
106444: RNCC: 5 | RNVC: 2

6 Nov 1976

5110-15-192-8733
Tronchesina Con Tag

151928733
0714-01-53: RNCC: 3 | RNVC: 2

26 Mar 2010

5110-99-910-9998
Hand Reamer

999109998
BS122 PART 2: RNCC: 4 | RNVC: 1
7/32"PARALLEL HAND REAMER: RNCC: 6 | RNVC: 9
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-120-7611
File Handle

121207611
DIN395-140: RNCC: 2 | RNVC: 2
140DIN395: RNCC: 5 | RNVC: 2
575C004-36: RNCC: 5 | RNVC: 9
5180-0204-22-2: RNCC: 5 | RNVC: 9
5180-204-22-2: RNCC: 5 | RNVC: 9

30 May 1969

5110-37-523-5583
Hand Operated Cable Cutter

375235583
L-CT-12D: RNCC: 3 | RNVC: 2

28 Jun 2012

5110-66-076-9587
Hand File

660769587
8IN TAPER SLIM SMOOTH CUT SAW: RNCC: 3 | RNVC: 2

26 Sep 1974

5110-98-107-0404
Scraper

981070404
ST 330: RNCC: 3 | RNVC: 2

9 Jun 1982

5110-98-105-2411
Hollo Cutting Punch

981052411
CREW 37: RNCC: 3 | RNVC: 2

5 Mar 1976

5110-15-190-3555
Manico

151903555
3GLEMZBS800: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-17-122-3979
Hand Rasp

171223979
631001: RNCC: 3 | RNVC: 2

29 Jul 2009

5110-21-102-9383
Hand Reamer

211029383
8175684: RNCC: 3 | RNVC: 2
104622: RNCC: 5 | RNVC: 9
104622: RNCC: 5 | RNVC: 9
32A0023: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-66-013-7029
Crosscut Hand Saw

660137029
D8: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-21-892-1936
Hand File

218921936
901811: RNCC: 3 | RNVC: 2

28 Feb 1983

5110-99-910-5125
Firmer Gouge

999105125
BS1943: RNCC: 4 | RNVC: 1
FA13941: RNCC: 6 | RNVC: 9
9105125: RNCC: 6 | RNVC: 9
1B1259: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-137-8344
Lima Piatta

151378344
2560/1-12: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-99-770-6794
Cable Strippe Blade

997706794
06801: RNCC: 3 | RNVC: 2
06801: RNCC: 5 | RNVC: 2
1H/1191: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-826-9564
Hand Reamer

998269564
BS328 PART 4: RNCC: 3 | RNVC: 1
B100: RNCC: 3 | RNVC: 1
B100 5/32IN.: RNCC: 5 | RNVC: 2

17 Mar 1999

5110-19-003-7890
Single Bow Cutting Punch

190037890
GRAZIANO REDONDO MANUAL N3: RNCC: 3 | RNVC: 2

20 Jul 2010

5110-15-125-1083
Scalpello Piatto Ti

151251083
35PM250: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-332-3221

5110-12-129-2433
Coping Saw Blade

121292433
51822110: RNCC: 3 | RNVC: 2
575F104-11: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-125-9259
Raspa Senza Manico

151259259
2670/1-12: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-573-8683
Bolt Cutter

145738683
990.B1: RNCC: 3 | RNVC: 2

16 Nov 2012

5110-99-832-8124
Hand Reamer

5110-99-139-3134
Stanley Knife Blade

991393134
NO PRIMARY REF 99-139-3134: RNCC: 3 | RNVC: 2
5193: RNCC: 5 | RNVC: 2
KNIFE 5193: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-172-0959
Mazza In Ferro Da K

151720959
MAZZA IN FERRO DA KG.5 SCU 2767: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-99-693-1462
Craftsman's Knife

996931462
KT-103-141: RNCC: 3 | RNVC: 2

29 Jun 2012

5110-25-100-0891

5110-99-476-5535
Drive Coupling Adap

994765535
MC1278040: RNCC: 3 | RNVC: 2

17 May 2002

5110-66-142-1213
Hand Round Nose Chisel

661421213
5CHR12710: RNCC: 3 | RNVC: 2
59MUM805: RNCC: 5 | RNVC: 2

5 Mar 1996

5110-99-910-4165

5110-33-190-2399

5110-12-126-1740
Woodcarving Gouge

121261740
NO PRIMARY REF 12-126-1740: RNCC: 3 | RNVC: 2
5110-0024-40: RNCC: 5 | RNVC: 9
5110-024-40: RNCC: 5 | RNVC: 9
TL5110-0024-40: RNCC: 5 | RNVC: 9
2573-9-4MM: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-335-5755

5110-12-122-2530
Hand Reamer

121222530
513A103SS41-64: RNCC: 3 | RNVC: 2

30 May 1969

5110-66-150-3278
Diagonal Cutting Pliers

661503278
NO PRIMARY REF 66-150-3278: RNCC: 3 | RNVC: 2
01304718: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-21-842-8662
Hand Reamer

218428662
B94-2: RNCC: 3 | RNVC: 1
B174-2: RNCC: 3 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1
8R5311: RNCC: 5 | RNVC: 9
50-10951: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-99-466-1368
Hand Reamer

994661368
NO PRIMARY REF 99-466-1368: RNCC: 3 | RNVC: 2
1G524: RNCC: 5 | RNVC: 2
1/6: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-454-7580

5110-15-213-4973
Levachiodi Carpent.

152134973
50X18: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-120-9467
Hand File

121209467
2182203: RNCC: 3 | RNVC: 2
K100X3DIN8342: RNCC: 5 | RNVC: 9

30 May 1969

5110-17-701-3811
Scraping Knife

177013811
1157: RNCC: 3 | RNVC: 2

16 May 1970

5110-27-011-3973
Hand File

270113973
99999-NIIN-DA0014180: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-21-851-2139
Hand File

218512139
39GP30: RNCC: 4 | RNVC: 1
5110-0386: RNCC: 5 | RNVC: 9

2 Aug 1968

5110-99-910-4948
Hand File

999104948
DEF1098: RNCC: 4 | RNVC: 1
H20656: RNCC: 5 | RNVC: 2
9104948: RNCC: 6 | RNVC: 9
1A1150: RNCC: 6 | RNVC: 9
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
FA13582: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-208-2650
Alesatore

152082650
3AAWFCCNFQ27-25: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-121-6860
Craftsman's Knife

121216860
121-225: RNCC: 3 | RNVC: 2

30 May 1969

5110-99-831-9166

5110-98-204-4565
Knife Blade

982044565
LCB-30: RNCC: 3 | RNVC: 2
LCB-30: RNCC: 3 | RNVC: 2

24 Oct 1995

5110-15-220-2230
Cesoia Lattoniere

152202230
BETTE-1112-300: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-807-1015
Round Hacksaw Blade

218071015
NO PRIMARY REF 21-807-1015: RNCC: 3 | RNVC: 2

14 Jul 1964

5110-15-138-0783
Tronchese A Taglien

151380783
182001: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-209-7054
Segaccio Sandvick-3

152097054
SANDWICK310: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-220-9322
Valve Recondit Tool

222209322
5: RNCC: 3 | RNVC: 2

26 Jan 1972

5110-15-218-1508
Mazzetta Muratore G

152181508
123P1000: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-610-0942
Hand Metal Cutting Shears

226100942
0 601 500 103: RNCC: 3 | RNVC: 2

6 Apr 2005

5110-17-103-2264
Schraper

171032264
856.7751: RNCC: 3 | RNVC: 2

5 Jun 1989

5110-15-165-3902
Barretta Per Inciso

151653902
9504240: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-541-0244
Coffret Decoupoirs

145410244
8002409001: RNCC: 3 | RNVC: 2
3303808002403: RNCC: 5 | RNVC: 2

5 May 2004

5110-15-165-4213
Tronchese

151654213
6SP: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-127-8139
Hand File

121278139
DIN7262-A200-2: RNCC: 2 | RNVC: 2
1232200: RNCC: 3 | RNVC: 2
1232-200-2: RNCC: 3 | RNVC: 2
1232-200-2: RNCC: 5 | RNVC: 2
DIN7262A200-2: RNCC: 5 | RNVC: 9
A200-2DIN7262: RNCC: 5 | RNVC: 9
C200EINHIEB2DIN8336: RNCC: 5 | RNVC: 9

30 May 1969

5110-17-007-2791
Hand File

170072791
TVA5110-2-263-005-1.1.23: RNCC: 3 | RNVC: 2
003660: RNCC: 3 | RNVC: 2
TVA5110-2-263-005: RNCC: 5 | RNVC: 1
12501401: RNCC: 5 | RNVC: 2

17 Jun 1972

5110-99-244-8663
Combi-Tel Terminati

992448663
NO PRIMARY REF 99-244-8663: RNCC: 3 | RNVC: 2
RS475-628: RNCC: 5 | RNVC: 2
475-628: RNCC: 5 | RNVC: 2
CT2-05904: RNCC: 5 | RNVC: 2

5 Aug 1997

5110-14-527-0335
Enclosed Blade Tube Deburring Tool

145270335
D9850-14M1606: RNCC: 3 | RNVC: 2

26 Sep 2001

5110-12-137-8028
Hand File

121378028
1614250: RNCC: 3 | RNVC: 2
1442-250: RNCC: 5 | RNVC: 9
3433-250: RNCC: 5 | RNVC: 9
575B303-250: RNCC: 5 | RNVC: 9
1312-250: RNCC: 5 | RNVC: 9
634191: RNCC: 5 | RNVC: 9
B250X2DIN8331LEICHTMETALL: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-213-4592
Sega Per Legno Stan

152134592
1-20-008: RNCC: 3 | RNVC: 2
02.13.29.86: RNCC: 5 | RNVC: 2

16 Nov 2005

5110-12-126-1681
Hand File

121261681
DIN7262-E200-3: RNCC: 2 | RNVC: 2
E200-3DIN7262: RNCC: 5 | RNVC: 2
A200XE3DIN8332: RNCC: 5 | RNVC: 9
DIN7262E200-3: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-490-8849
Alesoir

144908849
4067 010 001 853: RNCC: 3 | RNVC: 2
F300 0T 000 5121: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-15-208-7977
Pialla

152087977
5PLECNDB450X55: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-25-121-3239
End Cutting Nippers

251213239
300: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-99-794-6779
Jeweler's Saw Blade

997946779
ECLIPSE MO: RNCC: 3 | RNVC: 2
MO: RNCC: 5 | RNVC: 2

3 Nov 1989

5110-66-113-5223
Hand Diamond Point Chisel

661135223
DMS 206: RNCC: 4 | RNVC: 1

20 Feb 1982

5110-99-812-3743

5110-15-221-7640
Roncola

152217640
B44004561: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-942-0342
Hand Reamer

999420342
BS122 PART 2: RNCC: 4 | RNVC: 1
02-5602: RNCC: 6 | RNVC: 9
DEFSTAN51-9: RNCC: 6 | RNVC: 9
3/8" HAND TAPER PIN REAMER: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-560-1777
Hand Operated Cable Cutter

995601777
NO PRIMARY REF 99-560-1777: RNCC: 3 | RNVC: 2
PW77-61N: RNCC: 5 | RNVC: 2
86: RNCC: 5 | RNVC: 2
T2FC1969: RNCC: 5 | RNVC: 2
01-2242-0: RNCC: 5 | RNVC: 2
115-61N: RNCC: 5 | RNVC: 2
T2FC1969: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-17-022-8371
Bolt Cutter

170228371
TVA5110-2-263-008.1.1.1: RNCC: 3 | RNVC: 2
TVA5110-2-263-008: RNCC: 5 | RNVC: 1
158 N 0: RNCC: 5 | RNVC: 2

17 Jun 1972

5110-17-114-3753
Crosscut Hand Saw

171143753
297-22-U7/8 SANDVIK: RNCC: 3 | RNVC: 2
02.13.42.02: RNCC: 5 | RNVC: 2

16 Oct 2001

5110-15-132-5195
Serie 5 Pezzi Lame

151325195
L5027G: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-21-105-2138
Punch And Die Punch

211052138
2: RNCC: 3 | RNVC: 1
300080328: RNCC: 3 | RNVC: 2

4 Jun 1968

5110-15-165-3875
Tronchesi Abc

151653875
179712: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-732-7965
Chi Holder Assembly

5110-12-170-4606
Hand Reamer

121704606
DIN 206-B 11-HSS: RNCC: 2 | RNVC: 9
DIN206-B-11-HSS: RNCC: 2 | RNVC: 9
536C11: RNCC: 3 | RNVC: 9
513A201HSS11SPIRALGENUTET: RNCC: 3 | RNVC: 9
11602HSS11: RNCC: 3 | RNVC: 9
B11DIN206HSS: RNCC: 5 | RNVC: 9
334-11: RNCC: 5 | RNVC: 9

14 Jul 1977

5110-25-103-4777
Hand Cold Chisel

251034777
1SBF5110HVK7: RNCC: 2 | RNVC: 1
FM12: RNCC: 3 | RNVC: 2
FM12-7: RNCC: 3 | RNVC: 2
FM12-7IN: RNCC: 3 | RNVC: 2
3221-200-3: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-12-141-1706
Hand File

121411706
2172102: RNCC: 3 | RNVC: 2
2405-100-2: RNCC: 3 | RNVC: 2
2172-100-2: RNCC: 5 | RNVC: 2
H50X2DIN8342: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-108-7670

5110-34-037-7153
Paper Cutter

340377153
PIN/3M-14: RNCC: 3 | RNVC: 2
PIN/3M-14: RNCC: 5 | RNVC: 2

14 May 2008

5110-15-165-4178
Seghetto Con Tensio

151654178
537603: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-576-9758
Craftsman's Knife

145769758
10411: RNCC: 3 | RNVC: 2
5110MT0200082: RNCC: 6 | RNVC: 9

25 Jul 2013

5110-15-123-2296
Pinza Spelafilo Da

151232296
1142IN160: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-210-4790
Fustella

152104790
EX5110RN0406430: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-321-7509

5110-21-876-0187
Hand Metal Stamping Die Set

218760187
2587: RNCC: 3 | RNVC: 1
1567Y221: RNCC: 3 | RNVC: 2

5 Apr 1977

5110-12-387-1395
Pocket Knife

123871395
979628: RNCC: 3 | RNVC: 2

9 Nov 2011

5110-15-195-3902
Lama Per Seghetto

151953902
539PA: RNCC: 3 | RNVC: 2
(241)A5964539PA: RNCC: 5 | RNVC: 2

21 Mar 2011

5110-15-186-0910
Lama Per Filettare

151860910
9732G-12: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-22-125-3169
Shears

221253169
PC75-40R: RNCC: 3 | RNVC: 2

24 Mar 1998

5110-16-006-1654
Hand File

160061654
286211633035: RNCC: 3 | RNVC: 2
8595055900983: RNCC: 5 | RNVC: 2
PZP 300/3: RNCC: 5 | RNVC: 2

9 Dec 2008

5110-12-318-9476
Ven Schneideinsatz

123189476
21664230: RNCC: 3 | RNVC: 2

25 Aug 1989

5110-15-212-1482
Macchina Forapiastr

152121482
FORAPIASTRELLE: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-139-5732
Riffler

991395732
REGULARRIFFLERNO16CUT3-6.75OINLG: RNCC: 3 | RNVC: 2
REGULAR NO 16: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-150-2249
Steel Strapping Cutter

661502249
NO PRIMARY REF 66-150-2249: RNCC: 3 | RNVC: 2
04706655: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-15-144-5199
Scalpello Per Legno

151445199
5208G16: RNCC: 3 | RNVC: 2
6056-3-16: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-99-688-1413
File Handle

996881413
953-004-010: RNCC: 3 | RNVC: 2

26 Feb 2007

5110-99-465-8151
Axe Pouch

994658151
NO PRIMARY REF 99-465-8151: RNCC: 3 | RNVC: 2
GM8982: RNCC: 5 | RNVC: 2
1A4132: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-217-2586
Segaccio Con Manico

152172586
1.45.26.05: RNCC: 3 | RNVC: 2

16 Nov 2005

Load More Results