What is Federal Supply Class 4940?

FSC 4940 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4940) in the USA for supply items codified in the category of Miscellaneous Maintenance and Repair Shop Specialized Equipment.

What is NATO Supply Classification Class 4940?

NSC 4940 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4940 in the USA) for supply items codified in the category of Miscellaneous Maintenance and Repair Shop Specialized Equipment.

Which Federal Supply Group is FSC 4940 in?

FSC 4940 is in Federal Supply Group (FSG) 49 which contains Maintenance and Repair Shop Equipment.

Which NATO Supply Classification Group is NSC 4940 in?

NSC 4940is in NATO Supply Classification Group (NSG) 49 which contains Maintenance and Repair Shop Equipment.

What is a Demagnetizer?

A Demagnetizer is an item specifically designed to remove magnetism from another item. For items specifically designed to disorientate the magnetic signal induced on tape or wire in preparation for the recording of another signal, see ERASER, MAGNETIC.

What is a Magnet Charger?

A Magnet Charger (CHARGER,MAGNET) is an item specifically designed to restore or establish the field strength of a permanent magnet by energizing it with an electrical current.

What is an Internal Boiler Tube And Flue Cleaner?

An Internal Boiler Tube And Flue Cleaner (TUBE AND FLUE CLEANER,BOILER,INTERNAL) is a hand- or power-operated tool designed to remove inside deposits from boiler tubes by cutting, and/or scraping and with or without brushing. It may also be equipped with a vibrator head to remove scale from the exterior of boiler tubes. Excludes BRUSH, WIRE, BOILER TUBE.

What is a Blast Cleaning Cabinet?

A Blast Cleaning Cabinet is a suitable inclosure equipped with necessary devices through which abrasive materials are ejected either by air pressure or by centrifugal force against surface to be cleaned. It is designed to allow the operator to perform his duties through protected hand holes, viewing the operation through a suitable window.

What is a Propeller Pitch Block?

A Propeller Pitch Block (BLOCK,PITCH,PROPELLER) is a precision machined and shaped metal block, on which marine propellers are checked, to insure accuracy of pitch, boring, blade spacing, and layout. It is also used as a gauge or an anvil on which a damaged propeller can be beaten and restored to its original pitch.

What is a Propeller Balancing Arbor?

A Propeller Balancing Arbor (ARBOR,BALANCING,PROPELLER) is a fixture having two sliding cones for centering the hub bore of a marine propeller used when mounting on balancing ways.

What is a Maintenance Platform?

A Maintenance Platform is an item of equipment with small floored area(s) supported by scaffolding of metal or wood framework, either portable or stationary. For use in repairing, cleaning, installing, and inspection of property, machinery, and equipment above the general floor level. Excludes MAINTENANCE PLATFORM, AIRCRAFT and MAINTENANCE PLATFORM, GUIDED MISSILE or the like.

What is an Air Blow Gun?

An Air Blow Gun (GUN,AIR BLOW) is a mechanical device designed for attachment to the discharge end of a compressed air line, for blowing dirt or other foreign substance from motors, machinery, and the like.

What is a Pneumatic Cleaning Gun?

A Pneumatic Cleaning Gun (CLEANING GUN,PNEUMATIC) is a cleaning gun with reservoir designed to spray water or solvents. It is used with a COMPRESSOR UNIT (as modified). For items that do not have a reservoir, see: GUN,AIR BLOW

What is a Paint Spray Gun?

A Paint Spray Gun (SPRAY GUN,PAINT) is a mechaincal device for bringing air and a stream of paint or similar material together, atomizing or breaking up the stream into a spray and ejecting it for the purpose of applying a coating to an object or surface at high speed. See also SPRAY OUTFIT, PAINT.

What is a Shaker Type Paint Agitator?

A Shaker Type Paint Agitator (AGITATOR,PAINT,SHAKER TYPE) is a mechanical device consisting of a power-driven can holder or holders which shake or vibrate the contents of the can. It is used for rejuvenating or conditioning paint and the like.

What is a Revolving Shaft Liquid Mixer?

A Revolving Shaft Liquid Mixer (MIXER,LIQUID,REVOLVING SHAFT) is a mechanical device which may be fastened to a tank, vat, drum, and the like, consisting of an electric or pneumatic powered rotating shaft to which one or more stirrers or impellers are affixed. Excludes MIXING MACHINE, FOOD, ELECTRIC and MIXER, FLUID, ELECTRIC.

What is a Finishing-Material Pressure-Feed Tank?

A Finishing-Material Pressure-Feed Tank (TANK,PRESSURE-FEED,FINISHING-MATERIAL) is a metal container of sturdy construction used to hold materials such as paint, enamel, lacquer, emulsified asphalt, flock, latex, and ceramic materials, under pressure until released through a remote-operated spray gun by the air-displacement principle. Flow is controlled by valves, regulators, and gages on a lid clamped securely to the container. Excludes cups or other containers secured directly to spray guns.

What is a Hose Expansion Ring Expander?

A Hose Expansion Ring Expander (EXPANDER,HOSE EXPANSION RING) is an item used to expand expansion rings inside hose, such as fire hose, so that external fittings may be secured to the hose.

What is a Test Adapter?

A Test Adapter (ADAPTER,TEST) is an adapter which provides facilities for electrically connecting an item to be tested and a piece of test equipment. Do not use for interconnecting cables. Includes plug-in electronic component socket adapters which provide terminations for dynamic testing while an electronic component is inserted. See also COUPLER, TEST SET.

What is a Paint Spray Outfit?

A Paint Spray Outfit (SPRAY OUTFIT,PAINT) is an outfit consisting of spray gun(s) with fluid and air hose and one or more accessories such as pressure tank(s), feed cup(s) and the like and with or without an air compressor. It is designed for applying paints and similar fluids in large area covering operations at high speed.

What is a Spray Gun Oil And Water Separator?

A Spray Gun Oil And Water Separator (SEPARATOR,OIL AND WATER,SPRAY GUN) is a device for removing oil, water, dust and other foreign matter from compressed air for paint and metal spraying operations. It also regulates and indicates air pressure by means of valve(s) or gage(s). Excludes SEPARATOR, OIL and SEPARATOR, PIPELINE.

What is an Electrically Operated Armature Mica Undercutter?

An Electrically Operated Armature Mica Undercutter (UNDERCUTTER,ARMATURE MICA,ELECTRICALLY OPERATED) is a machine specifically designed for undercutting armature commutator mica insulation segments. Excludes armature turning and undercutting tools. See also UNDERCUTTER, ARMATURE MICA, HAND.

What is a Nonelectric Wheel Balancer?

A Nonelectric Wheel Balancer (BALANCER,WHEEL,NONELECTRIC) is a portable device designed to speed balancing, straightening and truing operations for propellers, disks and wheels.

What is a Commutator Resurfacer?

A Commutator Resurfacer (RESURFACER,COMMUTATOR) is a portable device designed to true up commutators or slip rings without dismantling. This device mounts directly on the brush rigging or arm by means of bearing or rigid supports. Replaceable abrasive stones are mounted in a holder which travels along entire face of commutator or slip ring.

What is a Condenser Tube Cleaning Plug?

A Condenser Tube Cleaning Plug (PLUG,CONDENSER TUBE CLEANING) is a cylindrical item which is propelled by air or water pressure through the inside of condenser tubes to clean foreign deposits from the inner surface.

A Degreaser is a device designed to remove grease and foreign matter from mechanical parts and like items, usually metallic, by purging action in vaporized or liquid solvent or solvent-free solution confined in a tank or similar vessel. It usally includes a circulating pump, heating mechanism, and may include an auxiliary supply tank and spray equipment, and/or an ultrasonic generator. For ittems consisting essentially of a metal vessel with heating equipment, and adaptable to functions other than degreasing (e.g., wax melting), see TANK, HOT DIP (as modified). See also PARTS CLEANING CAN. SAFETY, BENCH. Excludes CLEANER, ULTRASONIC.

What is a Rubber Covered Cable Vulcanizing Mold?

A Rubber Covered Cable Vulcanizing Mold (VULCANIZING MOLD,RUBBER COVERED CABLE) is a form consisting of two or more matched sections specifically designed for use with vulcanizing equipment for splicing or patching insulated electric wire or cable.

What is a Pressure Jet Steam Cleaner?

A Pressure Jet Steam Cleaner (CLEANER,STEAM,PRESSURE JET) is a unit designed to remove surface deposits of foreign materials by means of a forced stream of steam and detergent or water. Excludes CLEANER, STEAM, PRESSURE JET, TRAILER MOUNTED; DISHWASHING MACHINE, COMMERCIAL; DISHWASHING MACHINE, HOUSEHOLD; and CLEANER, PRESSURE, SOLVENT-WATER.

What is a Blast Cleaning Machine?

A Blast Cleaning Machine is a mechanical device consisting of an abrasive container and necessary valves and attachments which, when connected to a source of air pressure, mixes the abrasive with air to be discharged through a hose and nozzle at high speed against a surface not contained by the machine, to perform the function of surface cleaning. May include abrasive recovery system. It is an entirely self-contained unit.

What is a Hydraulic System Components Test Stand?

A Hydraulic System Components Test Stand (TEST STAND,HYDRAULIC SYSTEM COMPONENTS) is a cabinetlike item usually with a front work area and consisting of the necessary instrumentation, integral hydraulic system and component mounting facilities. Designed to provide the hydraulic pressure for testing and/or calibrating hydraulic system components, such as valves, actuating cylinders, pressure regulators, accumulators, hose lines, hand and/or engine driven pumps and the like. May include facilities for filling and checking hydraulic systems for leakage and performance. See also PUMPING UNIT, HYDRAULIC.

What is a Coil Winding Machine?

A Coil Winding Machine (WINDING MACHINE,COIL) is an item of equipment designed to wind one or more types of coils, such as armature, field or magnetic coils, and may include any of a number of accessories.

What is an Electrical Test And Maintenance Table?

An Electrical Test And Maintenance Table (TABLE,ELECTRICAL TEST AND MAINTENANCE) is a table designed for general use in the testing of electrical circuits in the maintenance of instruments and appliances operated by electricity.

What is a Refrigerant Gas Leak Detector Parts Kit?

A Refrigerant Gas Leak Detector Parts Kit (PARTS KIT,REFRIGERANT GAS LEAK DETECTOR) is a parts kit used in the repair of refrigerant gas leak detectors.

What is a Portable Hydraulic Press?

A Portable Hydraulic Press (PRESS,HYDRAULIC,PORTABLE) is a group of items consisting of a hydraulic ram and pump unit with attachments which, when assembled, will perform various functions of bending, straightening, forcing and pressing of metal parts. Excludes PRESS, ARBOR, HAND OPERATED.

What is a Fluid Pressure Pipeline Cleaning Element?

A Fluid Pressure Pipeline Cleaning Element (CLEANING ELEMENT,PIPELINE,FLUID PRESSURE) is an implement which, when propelled through a pipeline by fluid pressure, is designed to remove obstructions therein by the actions of scraping, buffing, and/or cutting.

What is an Electric Fluid Mixer And Tank?

An Electric Fluid Mixer And Tank (MIXER AND TANK,FLUID,ELECTRIC) is a unit consisting of a MIXER, LIQUID, REVOLVING SHAFT permanently attached to a covered cylindrical tank. It may or may not have a draw-off faucet. It is used to mix or blend various materials in a fluid state. See also MIXER, FLUID ELECTRIC; FOOD BLENDER, ELECTRIC; and MIXING MACHINE, FOOD, ELECTRIC.

What is a Shop Maintenance Tray?

A Shop Maintenance Tray (TRAY,SHOP MAINTENANCE) is a shallow, flat receptacle with a raised edge rim, used for holding, carrying, storing or displaying articles in a shop evironment.

What is a Refrigerant Service Kit?

A Refrigerant Service Kit (SERVICE KIT,REFRIGERANT) is a group of items consisting of adapters, gaskets, shutoff valve(s), hand tools, and the like. It is used in charging, purging and testing the refrigerant in hermetically sealed refrigerating units. See also TOOL KIT (1), REFRIGERATION EQUIPMENT.

What is a Globe-Angle-Cross Valve Reseating Outfit?

A Globe-Angle-Cross Valve Reseating Outfit (RESEATING OUTFIT,GLOBE-ANGLE-CROSS VALVE) is a unit furnished with various size cutters and/or other tools necessary for the reseating or replacement of seats in globe, angle, cross valves, and the like. May be hand operated or power operated.

What is a Spraying Booth?

A Spraying Booth (BOOTH,SPRAYING) is an assembled unit, usually constructed of sheet metal, specifically designed to confine and/or direct fumes, dust and overspray of paint, lacquer, corrosion preventative or like material to a suitable outlet or container. It may or may not be equipped with exhaust fan(s), circulating water pump(s) or both. It may also be incorporated with a tank as an integral or separate unit for storage of the water so circulated.

What is a Trailer Mounted Pressure Jet Steam Cleaner?

A Trailer Mounted Pressure Jet Steam Cleaner (CLEANER,STEAM,PRESSURE JET,TRAILER MOUNTED) is a unit designed to remove surface deposits of foreign materials by means of a forced stream of steam and detergent or water. Excludes CLEANER, STEAM, PRESSURE JET; DISHWASHING MACHINE, COMMERCIAL; DISHWASHING MACHINE, HOUSEHOLD; and CLEANER, PRESSURE, SOLVENT-WATER

What is a Trailer Mounted Cleaning Compound Spraying Unit?

A Trailer Mounted Cleaning Compound Spraying Unit (SPRAYING UNIT,CLEANING COMPOUND,TRAILER MOUNTED) is a self-contained power operated mobile item designed to spray a solvent cleaning compound on surfaces to remove deposits of foreign materials. See also SPRAYING UNIT, CLEANING COMPOUND, SKID MOUNTED.

What is a Bench Safety Parts Cleaning Can?

A Bench Safety Parts Cleaning Can (PARTS CLEANING CAN,SAFETY,BENCH) is a portable, cylindrical metal item, with a hinged cover. It contains a perforated metal dasher (fire baffle) mounted on a vertical coil spring. It is used for cleaning small parts with flammable or other solvent liquids. The cover may have a metal stand attached to the top so that the cover, when fully opened, may be used for holding parts during the drying process. See also DEGREASER and SAFETY CAN.

What is a Water Cleaning Gun?

A Water Cleaning Gun (CLEANING GUN,WATER) is a pressure nozzle designed to operate by water pressure to deliver a hard driving stream of water. It is primarily used for removing caked mud, ice, grease, and the like from the chassis and under the fenders of cars and trucks. See also NOZZLE (as modified).

What is an Electromagnetic Shielding Enclosure?

An Electromagnetic Shielding Enclosure (ENCLOSURE,ELECTROMAGNETIC SHIELDING) is a prefabricated and/or demountable structure designed to encompass electrical apparatus and personnel for the purpose of shielding against electromagnetic or mechanical interference. For items that do not encompass personnel, see SHIELD, TEST.

What is a Cold Dip Tank?

A Cold Dip Tank (TANK,COLD DIP) is a receptacle mainly constructed of metal, wood, earthenware, or stone. It may be equipped with discharge outlet(s), piping, valve(s), fitting(s), and the like. It may be used to clean metal with solvent or acid solutions, as insulating varnish bath for electric motor armatures, for enameling, quenching, preserving, and the like.

What is a Corrosive Material Mixing Tank?

A Corrosive Material Mixing Tank (TANK,MIXING,CORROSIVE MATERIAL) is a tank designed primarily for mixing and storage of corrosive materials such as battery acid and the like. It may be equipped with an acidproof drain valve.

What is a Multiposition Maintenance Fixture Holder?

A Multiposition Maintenance Fixture Holder (HOLDER,MAINTENANCE FIXTURE,MULTIPOSITION) is a device having a stationary or adjustable base with movable arm(s) for affixing maintenance fixtures to hold items in convenient working positions. It is commonly used for benchwork and may be free standing. For items which include maintenance fixtures, see MAINTENANCE FIXTURE (as modified).

What is a Power Operated Pipe And Sewer Auger Machine?

A Power Operated Pipe And Sewer Auger Machine (AUGER MACHINE,PIPE AND SEWER,POWER OPERATED) is a machine consisting of a portable steel frame on which is mounted an electric motor or gasoline engine designed to drive flexible steel cables and/or flexible steel rods by means of clutch controlled power cable retrieving equipment. The cables and rods are designed for the mounting of various types of augers and cutting blades. It is used to open clogged pipe and sewer lines. For hand held items designed with a drive similar to an electric drill, see AUGER KIT, WATER CLOSET-PIPE AND SEWER, ELECTRIC.

What is a Rotary Actuator Test Stand?

A Rotary Actuator Test Stand (TEST STAND,ROTARY ACTUATOR) is a unit, consisting essentially of dynamometers and electrical power input and output(s), designed to test the performance and operation characteristics of an ACTUATOR, ELECTRO-MECHANICAL, ROTARY.

What is a Portable Electric Blower?

A Portable Electric Blower (BLOWER,ELECTRIC,PORTABLE) is a hand-held device consisting of a structural frame, fan and motor, with a stem or nozzle. It is used for blowing sawdust and the like from motors, machinery, and other delicate equipment. Excludes CLEANER, VACUUM, ELECTRIC and CLEANER, VACUUM, PNEUMATIC with attachments for the purpose of picking up dust and particles of dirt by suction.

Miscellaneous Maintenance and Repair Shop Specialized Equipment - United States (US)

Federal Supply Class (FSC): 4940

NATO Supply Classification Class (NSC): 4940

Federal Supply Group (FSG): 49 Maintenance and Repair Shop Equipment

NATO Supply Classification Group (NSG): 49 Maintenance and Repair Shop Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 35 of 44

NSN Format for Miscellaneous Maintenance and Repair Shop Specialized Equipment
Codified by United States

49	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4940 is a classification for Miscellaneous Maintenance And Repair Shop Specialized Equipment. It falls under NATO Supply Group 49, which is dedicated to Maintenance And Repair Shop Equipment.

NATO Supply Class 4940 includes a wide range of specialized equipment used in maintenance and repair shops. This can include tools, machinery, and other equipment specifically designed for various maintenance and repair tasks.

The purpose of this classification is to provide a standardized system for categorizing and organizing equipment used in maintenance and repair shops within NATO member countries. By using this classification system, it becomes easier to identify, procure, and distribute the necessary equipment for these specialized tasks.

Examples of equipment that may fall under NATO Supply Class 4940 include welding machines, hydraulic presses, diagnostic tools, specialized hand tools, and other equipment used for maintenance and repair purposes.

It is important to note that this classification system is specific to NATO member countries and is used primarily for military purposes. However, the classification can also be used as a reference for non-military organizations or individuals involved in maintenance and repair work.

If you need more specific information about a particular item or have any other questions, feel free to ask!

FSC 4940 Miscellaneous Maintenance and Repair Shop Specialized Equipment - United States (US)

Includes Paint Spraying Equipment.

Excludes Hand Tools (FSG 51).

Note-Specialized equipment which is designed for automotive maintenance and repair, and which is also used for the maintenance and repair of nonautomotive vehicles or equipment, will be classified in Class 4910. Jigs, fixtures, and templates used in conjunction with maintenance and repair shop specialized equipment are classified in this group. However, jigs, fixtures, and templates used in conjunction with metalworking machinery are classified in Group 34. Infrared assemblies, subassemblies, and components specifically designed as test and maintenance specialized equipment are classified in the appropriate classes of this group. Excluded from this group is infrared equipment designed for testing communications and night vision equipment.

Frequently Asked Questions(FAQ) for Federal Supply Class 4940

What is Federal Supply Class 4940?: FSC 4940 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4940) in the USA for supply items codified in the category of Miscellaneous Maintenance and Repair Shop Specialized Equipment.
What is NATO Supply Classification Class 4940?: NSC 4940 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4940 in the USA) for supply items codified in the category of Miscellaneous Maintenance and Repair Shop Specialized Equipment.
Which Federal Supply Group is FSC 4940 in?: FSC 4940 is in Federal Supply Group (FSG) 49 which contains Maintenance and Repair Shop Equipment.
Which NATO Supply Classification Group is NSC 4940 in?: NSC 4940 is in NATO Supply Classification Group (NSG) 49 which contains Maintenance and Repair Shop Equipment.

Supply Items Included in Federal Supply Class 4940

What is a Demagnetizer? 36 Items: A Demagnetizer is an item specifically designed to remove magnetism from another item. For items specifically designed to disorientate the magnetic signal induced on tape or wire in preparation for the recording of another signal, see ERASER, MAGNETIC.
What is a Magnet Charger? 26 Items: A Magnet Charger (CHARGER,MAGNET) is an item specifically designed to restore or establish the field strength of a permanent magnet by energizing it with an electrical current.
What is an Internal Boiler Tube And Flue Cleaner? 37 Items: An Internal Boiler Tube And Flue Cleaner (TUBE AND FLUE CLEANER,BOILER,INTERNAL) is a hand- or power-operated tool designed to remove inside deposits from boiler tubes by cutting, and/or scraping and with or without brushing. It may also be equipped with a vibrator head to remove scale from the exterior of boiler tubes. Excludes BRUSH, WIRE, BOILER TUBE.
What is a Blast Cleaning Cabinet? 138 Items: A Blast Cleaning Cabinet is a suitable inclosure equipped with necessary devices through which abrasive materials are ejected either by air pressure or by centrifugal force against surface to be cleaned. It is designed to allow the operator to perform his duties through protected hand holes, viewing the operation through a suitable window.
What is a Propeller Pitch Block? 15 Items: A Propeller Pitch Block (BLOCK,PITCH,PROPELLER) is a precision machined and shaped metal block, on which marine propellers are checked, to insure accuracy of pitch, boring, blade spacing, and layout. It is also used as a gauge or an anvil on which a damaged propeller can be beaten and restored to its original pitch.
What is a Propeller Balancing Arbor? 11 Items: A Propeller Balancing Arbor (ARBOR,BALANCING,PROPELLER) is a fixture having two sliding cones for centering the hub bore of a marine propeller used when mounting on balancing ways.
What is a Maintenance Platform? 151 Items: A Maintenance Platform is an item of equipment with small floored area(s) supported by scaffolding of metal or wood framework, either portable or stationary. For use in repairing, cleaning, installing, and inspection of property, machinery, and equipment above the general floor level. Excludes MAINTENANCE PLATFORM, AIRCRAFT and MAINTENANCE PLATFORM, GUIDED MISSILE or the like.
Leak Detector,Refrigerant Gas 139 Items
What is an Air Blow Gun? 168 Items: An Air Blow Gun (GUN,AIR BLOW) is a mechanical device designed for attachment to the discharge end of a compressed air line, for blowing dirt or other foreign substance from motors, machinery, and the like.
What is a Pneumatic Cleaning Gun? 16 Items: A Pneumatic Cleaning Gun (CLEANING GUN,PNEUMATIC) is a cleaning gun with reservoir designed to spray water or solvents. It is used with a COMPRESSOR UNIT (as modified). For items that do not have a reservoir, see: GUN,AIR BLOW
Cleaning Gun,Steam 21 Items
What is a Paint Spray Gun? 158 Items: A Paint Spray Gun (SPRAY GUN,PAINT) is a mechaincal device for bringing air and a stream of paint or similar material together, atomizing or breaking up the stream into a spray and ejecting it for the purpose of applying a coating to an object or surface at high speed. See also SPRAY OUTFIT, PAINT.
What is a Shaker Type Paint Agitator? 33 Items: A Shaker Type Paint Agitator (AGITATOR,PAINT,SHAKER TYPE) is a mechanical device consisting of a power-driven can holder or holders which shake or vibrate the contents of the can. It is used for rejuvenating or conditioning paint and the like.
What is a Revolving Shaft Liquid Mixer? 46 Items: A Revolving Shaft Liquid Mixer (MIXER,LIQUID,REVOLVING SHAFT) is a mechanical device which may be fastened to a tank, vat, drum, and the like, consisting of an electric or pneumatic powered rotating shaft to which one or more stirrers or impellers are affixed. Excludes MIXING MACHINE, FOOD, ELECTRIC and MIXER, FLUID, ELECTRIC.
Electronic Shop,Semitrailer Mounted 26 Items
Instrument Repair Shop,Truck Mounted 10 Items
What is a Finishing-Material Pressure-Feed Tank? 34 Items: A Finishing-Material Pressure-Feed Tank (TANK,PRESSURE-FEED,FINISHING-MATERIAL) is a metal container of sturdy construction used to hold materials such as paint, enamel, lacquer, emulsified asphalt, flock, latex, and ceramic materials, under pressure until released through a remote-operated spray gun by the air-displacement principle. Flow is controlled by valves, regulators, and gages on a lid clamped securely to the container. Excludes cups or other containers secured directly to spray guns.
What is a Hose Expansion Ring Expander? 14 Items: A Hose Expansion Ring Expander (EXPANDER,HOSE EXPANSION RING) is an item used to expand expansion rings inside hose, such as fire hose, so that external fittings may be secured to the hose.
What is a Test Adapter? 398 Items: A Test Adapter (ADAPTER,TEST) is an adapter which provides facilities for electrically connecting an item to be tested and a piece of test equipment. Do not use for interconnecting cables. Includes plug-in electronic component socket adapters which provide terminations for dynamic testing while an electronic component is inserted. See also COUPLER, TEST SET.
What is a Paint Spray Outfit? 133 Items: A Paint Spray Outfit (SPRAY OUTFIT,PAINT) is an outfit consisting of spray gun(s) with fluid and air hose and one or more accessories such as pressure tank(s), feed cup(s) and the like and with or without an air compressor. It is designed for applying paints and similar fluids in large area covering operations at high speed.
Cup,Paint,Spray Gun 66 Items
What is a Spray Gun Oil And Water Separator? 19 Items: A Spray Gun Oil And Water Separator (SEPARATOR,OIL AND WATER,SPRAY GUN) is a device for removing oil, water, dust and other foreign matter from compressed air for paint and metal spraying operations. It also regulates and indicates air pressure by means of valve(s) or gage(s). Excludes SEPARATOR, OIL and SEPARATOR, PIPELINE.
Case,Test Set 58 Items
What is an Electrically Operated Armature Mica Undercutter? 11 Items: An Electrically Operated Armature Mica Undercutter (UNDERCUTTER,ARMATURE MICA,ELECTRICALLY OPERATED) is a machine specifically designed for undercutting armature commutator mica insulation segments. Excludes armature turning and undercutting tools. See also UNDERCUTTER, ARMATURE MICA, HAND.
What is a Nonelectric Wheel Balancer? 16 Items: A Nonelectric Wheel Balancer (BALANCER,WHEEL,NONELECTRIC) is a portable device designed to speed balancing, straightening and truing operations for propellers, disks and wheels.
What is a Commutator Resurfacer? 15 Items: A Commutator Resurfacer (RESURFACER,COMMUTATOR) is a portable device designed to true up commutators or slip rings without dismantling. This device mounts directly on the brush rigging or arm by means of bearing or rigid supports. Replaceable abrasive stones are mounted in a holder which travels along entire face of commutator or slip ring.
Cutter,Milling,Commutator Mica 31 Items
What is a Condenser Tube Cleaning Plug? 15 Items: A Condenser Tube Cleaning Plug (PLUG,CONDENSER TUBE CLEANING) is a cylindrical item which is propelled by air or water pressure through the inside of condenser tubes to clean foreign deposits from the inner surface.
What is a Degreaser? 354 Items: A Degreaser is a device designed to remove grease and foreign matter from mechanical parts and like items, usually metallic, by purging action in vaporized or liquid solvent or solvent-free solution confined in a tank or similar vessel. It usally includes a circulating pump, heating mechanism, and may include an auxiliary supply tank and spray equipment, and/or an ultrasonic generator. For ittems consisting essentially of a metal vessel with heating equipment, and adaptable to functions other than degreasing (e.g., wax melting), see TANK, HOT DIP (as modified). See also PARTS CLEANING CAN. SAFETY, BENCH. Excludes CLEANER, ULTRASONIC.
What is a Rubber Covered Cable Vulcanizing Mold? 16 Items: A Rubber Covered Cable Vulcanizing Mold (VULCANIZING MOLD,RUBBER COVERED CABLE) is a form consisting of two or more matched sections specifically designed for use with vulcanizing equipment for splicing or patching insulated electric wire or cable.
What is a Pressure Jet Steam Cleaner? 112 Items: A Pressure Jet Steam Cleaner (CLEANER,STEAM,PRESSURE JET) is a unit designed to remove surface deposits of foreign materials by means of a forced stream of steam and detergent or water. Excludes CLEANER, STEAM, PRESSURE JET, TRAILER MOUNTED; DISHWASHING MACHINE, COMMERCIAL; DISHWASHING MACHINE, HOUSEHOLD; and CLEANER, PRESSURE, SOLVENT-WATER.
What is a Blast Cleaning Machine? 181 Items: A Blast Cleaning Machine is a mechanical device consisting of an abrasive container and necessary valves and attachments which, when connected to a source of air pressure, mixes the abrasive with air to be discharged through a hose and nozzle at high speed against a surface not contained by the machine, to perform the function of surface cleaning. May include abrasive recovery system. It is an entirely self-contained unit.
What is a Hydraulic System Components Test Stand? 32 Items: A Hydraulic System Components Test Stand (TEST STAND,HYDRAULIC SYSTEM COMPONENTS) is a cabinetlike item usually with a front work area and consisting of the necessary instrumentation, integral hydraulic system and component mounting facilities. Designed to provide the hydraulic pressure for testing and/or calibrating hydraulic system components, such as valves, actuating cylinders, pressure regulators, accumulators, hose lines, hand and/or engine driven pumps and the like. May include facilities for filling and checking hydraulic systems for leakage and performance. See also PUMPING UNIT, HYDRAULIC.
What is a Coil Winding Machine? 24 Items: A Coil Winding Machine (WINDING MACHINE,COIL) is an item of equipment designed to wind one or more types of coils, such as armature, field or magnetic coils, and may include any of a number of accessories.
Stand,Maintenance,Armature 11 Items
What is an Electrical Test And Maintenance Table? 15 Items: An Electrical Test And Maintenance Table (TABLE,ELECTRICAL TEST AND MAINTENANCE) is a table designed for general use in the testing of electrical circuits in the maintenance of instruments and appliances operated by electricity.
What is a Refrigerant Gas Leak Detector Parts Kit? 12 Items: A Refrigerant Gas Leak Detector Parts Kit (PARTS KIT,REFRIGERANT GAS LEAK DETECTOR) is a parts kit used in the repair of refrigerant gas leak detectors.
What is a Portable Hydraulic Press? 25 Items: A Portable Hydraulic Press (PRESS,HYDRAULIC,PORTABLE) is a group of items consisting of a hydraulic ram and pump unit with attachments which, when assembled, will perform various functions of bending, straightening, forcing and pressing of metal parts. Excludes PRESS, ARBOR, HAND OPERATED.
What is a Fluid Pressure Pipeline Cleaning Element? 27 Items: A Fluid Pressure Pipeline Cleaning Element (CLEANING ELEMENT,PIPELINE,FLUID PRESSURE) is an implement which, when propelled through a pipeline by fluid pressure, is designed to remove obstructions therein by the actions of scraping, buffing, and/or cutting.
What is an Electric Fluid Mixer And Tank? 12 Items: An Electric Fluid Mixer And Tank (MIXER AND TANK,FLUID,ELECTRIC) is a unit consisting of a MIXER, LIQUID, REVOLVING SHAFT permanently attached to a covered cylindrical tank. It may or may not have a draw-off faucet. It is used to mix or blend various materials in a fluid state. See also MIXER, FLUID ELECTRIC; FOOD BLENDER, ELECTRIC; and MIXING MACHINE, FOOD, ELECTRIC.
What is a Shop Maintenance Tray? 165 Items: A Shop Maintenance Tray (TRAY,SHOP MAINTENANCE) is a shallow, flat receptacle with a raised edge rim, used for holding, carrying, storing or displaying articles in a shop evironment.
What is a Refrigerant Service Kit? 16 Items: A Refrigerant Service Kit (SERVICE KIT,REFRIGERANT) is a group of items consisting of adapters, gaskets, shutoff valve(s), hand tools, and the like. It is used in charging, purging and testing the refrigerant in hermetically sealed refrigerating units. See also TOOL KIT (1), REFRIGERATION EQUIPMENT.
What is a Globe-Angle-Cross Valve Reseating Outfit? 14 Items: A Globe-Angle-Cross Valve Reseating Outfit (RESEATING OUTFIT,GLOBE-ANGLE-CROSS VALVE) is a unit furnished with various size cutters and/or other tools necessary for the reseating or replacement of seats in globe, angle, cross valves, and the like. May be hand operated or power operated.
What is a Spraying Booth? 121 Items: A Spraying Booth (BOOTH,SPRAYING) is an assembled unit, usually constructed of sheet metal, specifically designed to confine and/or direct fumes, dust and overspray of paint, lacquer, corrosion preventative or like material to a suitable outlet or container. It may or may not be equipped with exhaust fan(s), circulating water pump(s) or both. It may also be incorporated with a tank as an integral or separate unit for storage of the water so circulated.
What is a Trailer Mounted Pressure Jet Steam Cleaner? 31 Items: A Trailer Mounted Pressure Jet Steam Cleaner (CLEANER,STEAM,PRESSURE JET,TRAILER MOUNTED) is a unit designed to remove surface deposits of foreign materials by means of a forced stream of steam and detergent or water. Excludes CLEANER, STEAM, PRESSURE JET; DISHWASHING MACHINE, COMMERCIAL; DISHWASHING MACHINE, HOUSEHOLD; and CLEANER, PRESSURE, SOLVENT-WATER
What is a Trailer Mounted Cleaning Compound Spraying Unit? 16 Items: A Trailer Mounted Cleaning Compound Spraying Unit (SPRAYING UNIT,CLEANING COMPOUND,TRAILER MOUNTED) is a self-contained power operated mobile item designed to spray a solvent cleaning compound on surfaces to remove deposits of foreign materials. See also SPRAYING UNIT, CLEANING COMPOUND, SKID MOUNTED.
What is a Bench Safety Parts Cleaning Can? 10 Items: A Bench Safety Parts Cleaning Can (PARTS CLEANING CAN,SAFETY,BENCH) is a portable, cylindrical metal item, with a hinged cover. It contains a perforated metal dasher (fire baffle) mounted on a vertical coil spring. It is used for cleaning small parts with flammable or other solvent liquids. The cover may have a metal stand attached to the top so that the cover, when fully opened, may be used for holding parts during the drying process. See also DEGREASER and SAFETY CAN.
What is a Water Cleaning Gun? 30 Items: A Water Cleaning Gun (CLEANING GUN,WATER) is a pressure nozzle designed to operate by water pressure to deliver a hard driving stream of water. It is primarily used for removing caked mud, ice, grease, and the like from the chassis and under the fenders of cars and trucks. See also NOZZLE (as modified).
What is an Electromagnetic Shielding Enclosure? 176 Items: An Electromagnetic Shielding Enclosure (ENCLOSURE,ELECTROMAGNETIC SHIELDING) is a prefabricated and/or demountable structure designed to encompass electrical apparatus and personnel for the purpose of shielding against electromagnetic or mechanical interference. For items that do not encompass personnel, see SHIELD, TEST.
What is a Cold Dip Tank? 42 Items: A Cold Dip Tank (TANK,COLD DIP) is a receptacle mainly constructed of metal, wood, earthenware, or stone. It may be equipped with discharge outlet(s), piping, valve(s), fitting(s), and the like. It may be used to clean metal with solvent or acid solutions, as insulating varnish bath for electric motor armatures, for enameling, quenching, preserving, and the like.
What is a Corrosive Material Mixing Tank? 10 Items: A Corrosive Material Mixing Tank (TANK,MIXING,CORROSIVE MATERIAL) is a tank designed primarily for mixing and storage of corrosive materials such as battery acid and the like. It may be equipped with an acidproof drain valve.
What is a Multiposition Maintenance Fixture Holder? 78 Items: A Multiposition Maintenance Fixture Holder (HOLDER,MAINTENANCE FIXTURE,MULTIPOSITION) is a device having a stationary or adjustable base with movable arm(s) for affixing maintenance fixtures to hold items in convenient working positions. It is commonly used for benchwork and may be free standing. For items which include maintenance fixtures, see MAINTENANCE FIXTURE (as modified).
What is a Power Operated Pipe And Sewer Auger Machine? 39 Items: A Power Operated Pipe And Sewer Auger Machine (AUGER MACHINE,PIPE AND SEWER,POWER OPERATED) is a machine consisting of a portable steel frame on which is mounted an electric motor or gasoline engine designed to drive flexible steel cables and/or flexible steel rods by means of clutch controlled power cable retrieving equipment. The cables and rods are designed for the mounting of various types of augers and cutting blades. It is used to open clogged pipe and sewer lines. For hand held items designed with a drive similar to an electric drill, see AUGER KIT, WATER CLOSET-PIPE AND SEWER, ELECTRIC.
What is a Rotary Actuator Test Stand? 14 Items: A Rotary Actuator Test Stand (TEST STAND,ROTARY ACTUATOR) is a unit, consisting essentially of dynamometers and electrical power input and output(s), designed to test the performance and operation characteristics of an ACTUATOR, ELECTRO-MECHANICAL, ROTARY.
What is a Portable Electric Blower? 30 Items: A Portable Electric Blower (BLOWER,ELECTRIC,PORTABLE) is a hand-held device consisting of a structural frame, fan and motor, with a stem or nozzle. It is used for blowing sawdust and the like from motors, machinery, and other delicate equipment. Excludes CLEANER, VACUUM, ELECTRIC and CLEANER, VACUUM, PNEUMATIC with attachments for the purpose of picking up dust and particles of dirt by suction.
Parts Kit,Pressure Jet Steam Cleaner 12 Items
What is a Dipping-Draining Basket? 32 Items: A Dipping-Draining Basket (BASKET,DIPPING-DRAINING) is a container made of perforated or open mesh material. It may have handle(s), bail(s), or hand grips, and may be furnished with hook(s) for use with conveyor systems. It is used for dipping and draining objects when cleaning and/or applying preservative coatings.
What is a Self-Propelled Servicing Platform? 87 Items: A Self-Propelled Servicing Platform (SERVICING PLATFORM,SELF-PROPELLED) is a self-propolled item designed to provide a safe working platform for overhead or overhead and below the ground level installation, inspection, maintenance, repair, or construction operation. A small floored area (working platform) is mounted on articulated booms which may be rotated in any horizontal plane within the limits of the supporting equipment. The booms are cable and/or hydraulically operated and are controlled by mechanism located within the platform and/or on the vehicle. (Excludes MAINTENANCE PLATFORM and SERVICING PLATFORM, TRACTOR MOUNTED.)
What is a Transportable Electronic Shop? 34 Items: A Transportable Electronic Shop (ELECTRONIC SHOP,TRANSPORTABLE) is a transportable unmounted electronic maintenance shop incorporating electronic test equipment and facilities for repair of electronic and communications equipment.
What is a Self Pressurized Spray Kit? 19 Items: A Self Pressurized Spray Kit (SPRAY KIT,SELF PRESSURIZED) is an externally pressurized spray unit utilizing a container pressurized with a liquid gas, to atomize a product contained in a separate jar. Includes spray nozzle and valve with activating mechanism. It is used for spraying paints, primers, degreasing compounds, plastic sealing compounds, insecticides, or the like. Excludes aerosol self-contained spraying cans.
What is a Solvent-Water Pressure Cleaner? 184 Items: A Solvent-Water Pressure Cleaner (CLEANER,PRESSURE,SOLVENT-WATER) is a pressure cleaner used to project streams of water detergents, soaps, or cleaning solvents for cleaning motor vehicle exteriors, engines, aircraft exteriors, and the like. Excludes CLEANING GUN, WATER.
What is a Hydraulic Hose Assembly Tester? 40 Items: A Hydraulic Hose Assembly Tester (TESTER,HYDRAULIC HOSE ASSEMBLY) is a pneumatically operated unit consisting of a pump, a fluid reservoir, filters, lines, fittings, and control gages. It is specifically designed to perform proof pressure and leakage tests on hose assemblies.
What is an Electrical Equipment Shop Equipment? 15 Items: An Electrical Equipment Shop Equipment (SHOP EQUIPMENT,ELECTRICAL EQUIPMENT) is see also SHOP EQUIPMENT (1), ELECTRICAL EQUIPMENT, SEMI TRAILER MOUNTED.
Shop Equipment,Fuel And Electrical System,Engine 10 Items
Shop Equipment,Utility 142 Items
What is a Truck Mounted Utility Shop Equipment? 10 Items: A Truck Mounted Utility Shop Equipment (SHOP EQUIPMENT,UTILITY,TRUCK MOUNTED) is for use in conjunction with other motorized shops. Do not use if a more specific name is applicable.
Shop Equipment,Instrument 15 Items
What is a Storage Rack And Work Table Shop Equipment? 11 Items: A Storage Rack And Work Table Shop Equipment (SHOP EQUIPMENT,STORAGE RACK AND WORK TABLE) is a group of items consisting of work table tops, material for table top supports, and material for racks and/or shelves to be assembled in a van, shelter, or the like, to perform maintenance work.
What is a Tire Shop Equipment? 35 Items: A Tire Shop Equipment (SHOP EQUIPMENT,TIRE) is a group of items consisting of tools, accessories, and equipment, such as breakdown stands, vulcanizers, tire irons, and the like, designed for the repair of tires. Excludes SHOP EQUIPMENT (1), VULCANIZING, CABLE.
What is a Toolroom Shop Equipment? 24 Items: A Toolroom Shop Equipment (SHOP EQUIPMENT,TOOLROOM) is a group of special tools, materials and equipment, such as storage bins, portable crain, degreasers, disk and the like, used in conjunction with other shops.
What is a Welding Shop Equipment? 36 Items: A Welding Shop Equipment (SHOP EQUIPMENT,WELDING) is a group of items, such as welding machines, welding positioners, and the like, designed for general welding and cutting operations.
What is an Electronic Equipment Shop Equipment? 28 Items: An Electronic Equipment Shop Equipment (SHOP EQUIPMENT,ELECTRONIC EQUIPMENT) is see also SHOP EQUIPMENT (1), ELECTRONIC EQUIPMENT, SEMI TRAILER MOUNTED
Parts Kit,Spray Gun 140 Items
What is an Optical Instrument Tool And Equipment Kit? 15 Items: An Optical Instrument Tool And Equipment Kit (TOOL AND EQUIPMENT KIT,OPTICAL INSTRUMENT) is a group of items specifically designed to perform maintenance on an optical instrument.
What is a Metal Repair Kit? 13 Items: A Metal Repair Kit (REPAIR KIT,METAL) is a Repair Kit consisting of panels, tools, application accessories and expendable materials required for use on the panels of shelters, containers, craft, and the like.
What is a Positioning Table? 54 Items: A Positioning Table (TABLE,POSITIONING) is an item designed to accurately position another item for inspection, testing, maintenance or machining. The item is capable of linear and/or rotational movement but is not furnished with a work-holding device such as a chuck or vise. It may be manually operated or motor driven. Excludes POSITIONER, WELDING.
What is a Test Adapter Kit? 51 Items: A Test Adapter Kit (ADAPTER KIT,TEST) is an adapter kit containing items such as adapters, cables, power supply, switching units, and auxiliary test means. Cases and special tools may be included. It is used to adapt items to the standard interface of a piece of test equipment.
What is a Hose Reel Assembly? 153 Items: A Hose Reel Assembly (REEL ASSEMBLY,HOSE) is a circular device with flanged ends designed to accommodate a hose. May include components such as bracket(s), legs, hand crank, ratchet spring loaded device for automatic hose return, inlet and outlet ports for hose attachments. May be of high or low pressure and can be styled for floor, bench, service vehicle, trailer or ceiling mounted. Excludes WINCH, DRUM, (as modified).
What is a Contact Maintenance Shop Equipment? 23 Items: A Contact Maintenance Shop Equipment (SHOP EQUIPMENT,CONTACT MAINTENANCE) is item consists of utility type body mounted on a chassis. The shop set is intended to provide tools and equipment for intermediate level maintenance personnel, when operating in the field and to allow limited repair of equipment of supported organizations. Electrical power is provided by an installed generator operated by the vehicle's power take off.
What is an Organizational Maintenance Truck Mounted Shop Equipment? 10 Items: An Organizational Maintenance Truck Mounted Shop Equipment (SHOP EQUIPMENT,ORGANIZATIONAL MAINTENANCE TRUCK MOUNTED) is item consists of a mobile shop, with folding sides and a rear opening type body mounted on a chassis and provided with an auxiliary canvas enclosure for cold weather operation. This shop set is intended to provide machine tools, equipment, and work space to allow organizational personnel to perform maintenance at limited intermediate maintenance repair of organizational equipment in the field. Electrical power is provided by an installed generator operated by the vehicle's power take off.
What is a Paint Spray Gun Nozzle Kit? 36 Items: A Paint Spray Gun Nozzle Kit (NOZZLE KIT,SPRAY GUN,PAINT) is a kit consisting of a fluid nozzle, an air nozzle and a fluid needle valve assembly.
What is a Paint Spray Gun Air Nozzle? 44 Items: A Paint Spray Gun Air Nozzle (AIR NOZZLE,SPRAY GUN,PAINT) is an item designed to atomize the fluid flow of different kinds of paint, sealers, primers, epoxies and urethanes through the action of air jets under high pressure and speed. It may have an adjustable spray pattern. It may include or be used in conjunction with FLUID NOZZLE, SPRAY GUN, PAINT.
What is a Paint Spray Gun Fluid Nozzle? 151 Items: A Paint Spray Gun Fluid Nozzle (FLUID NOZZLE,SPRAY GUN,PAINT) is a device used to meter the fluid viscosity and volume by the orifice size and to direct the fluid into the air stream. It is used in conjunction with AIR NOZZLE, SPRAY GUN, PAINT and/or FLUID NEEDLE VALVE, SPRAY GUN, PAINT.
What is a Paint Spray Gun Fluid Needle Valve? 67 Items: A Paint Spray Gun Fluid Needle Valve (FLUID NEEDLE VALVE,SPRAY GUN,PAINT) is an item used in conjunction with FLUID NOZZLE, SPRAY GUN, PAINT to shut off the fluid flow and to meter the fluid to some degree.
What is a Maintenance Platform Section? 15 Items: A Maintenance Platform Section is an individual unit of metallic or nonmetallic material used with other pieces/parts to make up the MAINTENANCE PLATFORM; MAINTENANCE PLATFORM, AIRCRAFT; or MAINTENANCE PLATFORM, GUIDED MISSILE.
What is an Actuator Pilot Pin? 35 Items: An Actuator Pilot Pin (PILOT PIN,ACTUATOR) is a headless cylindrical shaped item tapering along its length. A portion is threaded. It is used for aligining or fastening.
Air Cap,Spray Gun 89 Items
What is a Sewer Pipe Cleaning Auger? 25 Items: A Sewer Pipe Cleaning Auger (AUGER,PIPE CLEANING,SEWER) is a flat, spiral blade with cutting edges of front and back sides, specifically designed for boring and/or tunneling into sewer pipes for the removal of debris. Must be operated by power equipment.
Table Mat,Work Station 10 Items
Body,Spray Gun 25 Items
What is an Ultrasonic Cleaner? 105 Items: An Ultrasonic Cleaner (CLEANER,ULTRASONIC) is an electrical device designed to clean items by using ultrasonic pressure waves. It consists of an ultrasonic generator for ultrasonic scrubbing action, controls, and may have a stainless steel tank, a basket with or without a cover, and the like. It may also include a heating element and timer. Excludes DEGREASER; PARTS CLEANING CAN, SAFETY BENCH; and WASHING MACHINE LABORATORY.
What is a Mechanical Test Adapter Kit? 60 Items: A Mechanical Test Adapter Kit (ADAPTER KIT,MECHANICAL TEST) is a collection of various types of ADAPTER (1), MECHANICAL TEST with associated mechanical and/or hydraulic and/or pneumatic connectors, linkages, and fittings necessary for the adaptation of test items to the standard interface of a tester/test set. Cases, special tools and cleaning supplies may be included. Excludes ADAPTER SET, TEST.
What is a Mechanical Test Adapter? 488 Items: A Mechanical Test Adapter (ADAPTER,MECHANICAL TEST) is an item which provides facilities for mechanically connecting an item to be tested and a piece of test equipment. It may include hydraulic and/or pneumatic functions. Do not use for CONNECTOR, MULTIPLE, FLUID MEASURE LINE or MANIFOLD, HYDRAULIC SYSTEM ACCESSORIES or the like. Excludes ADAPTER (2), TEST.
What is a Platform Lift? 93 Items: A Platform Lift is an item of equipment which may be self-propelled, truck mounted or trailer mounted. Item is designed to provide a safe working platform for overhead installation, inspection, maintenance, repair or construction. A small floored area (working platform) is mounted on scissor arms for vertical extension only. Working platform may include a cantilever for additional horizontal reach. Scissor Arms are hydraulically operated and controlled by a mechanism located within the platform and/or on the vehicle. Excludes SERVICING PLATFORM, as modified and MAINTENANCE PLATFORM.
What is a Blast Cleaning Room? 18 Items: A Blast Cleaning Room is a suitable inclosure equipped with necessary devices through which abrasive materials are ejected either by air pressure or by centrifugal force against surface to be cleaned. It is designed to allow the operator to perform his duties from his location within the inclosure. It may be additionally provided with material handling systems, and/or suitably equipped suits for inside operations. It may be stationary or portable.
What is a Drip Pan? 116 Items: A Drip Pan (PAN,DRIP) is a metallic or nonmetallic receptacle which is placed under a motor, generator, appliance or in a similar location to collect liquid from overflows, leaks, condensation and the like. It may have one or more facilities for draining.
What is a Trailer Mounted Maintenance Power Unit? 13 Items: A Trailer Mounted Maintenance Power Unit (POWER UNIT,MAINTENANCE,TRAILER MOUNTED) is a mobile power unit with electrical, pneumatic and/or hydralulic capabilities designed for full-service operation and full-serviceability. It consists of individual system modules to simplify service and maintenance. It is equipped with its own power, specilaized tools, supplies and equipment necessary to perform the required functions. This mobile unit will/can be used in the event of a power failure. See also POWER PLANT, UTILITY. Excludes TRAILER, MAINTENANCE.
What is a Recovery Still? 18 Items: A Recovery Still (STILL,RECOVERY) is a portable, mobile or stationary still for the reclamation of chlorinated hydrocarbon oil and solvents used in degreasers, paint and the like.
Repair Kit,Electrical Cable 34 Items
What is an Electric Glue Gun? 11 Items: An Electric Glue Gun (GLUE GUN,ELECTRIC) is a gun-shaped item designed to heat solid glue sticks thus enabling the application of the glue to a surface.
What is a Mechanical Equipment Test Fixture? 150 Items: A Mechanical Equipment Test Fixture (FIXTURE,TEST,MECHANICAL EQUIPMENT) is a fixture used to position a mechanical device in a specific manner during testing of its various functions.
What is a Calibration Shop Equipment? 32 Items: A Calibration Shop Equipment (SHOP EQUIPMENT,CALIBRATION) is a group of items consisting of tools, accessories, and equipment to calibrate TEST SET (as modified), meters and the like.
What is a Pressurizing Charging Kit? 17 Items: A Pressurizing Charging Kit (CHARGING KIT,PRESSURIZING) is a collection of components used to pressurize recoil mechanism in towed and self-propelled howitzers and the like. It consists of gage assemblies, charging assembly, cylinder valve adapters, and other relative components. May include case or box for housing or portability.
What is an Electrical System Repair Kit? 16 Items: An Electrical System Repair Kit (REPAIR KIT,ELECTRICAL SYSTEM) is a repair kit consisting of tools and spare parts such as lamps, fuses, fuse holders, contractors, switches and so on, which is used for the repair and maintenance of an electrical system as can be found in buildings or on watercraft.
What is an Electrical Gun Type Heater Deflector? 13 Items: An Electrical Gun Type Heater Deflector (DEFLECTOR,HEATER,GUN TYPE,ELECTRICAL) is an item of different shapes and sizes designed to deflect an air flow. It is used in the processing of heat-shrinking and other plastic products in connection with a HEATER, GUN TYPE, ELECTRICAL.
What is an Electrical Gun Type Heater Nozzle? 37 Items: An Electrical Gun Type Heater Nozzle (NOZZLE,HEATER,GUN TYPE,ELECTRICAL) is an item of different shapes and opening sizes through which an air flow is conducted. It is used in connection with a HEATER, GUN TYPE, ELECTRIC.
What is a Dust And Moisture Seal Protective Cover? 19 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electric Heat Gun? 132 Items: An Electric Heat Gun (HEAT GUN,ELECTRIC) is an electrically driven pistol-shaped device, normally hand-held, used to deliver hot air in excess of 100 degrees Celsius for drying, curing, forming, activating, softening, shrinking, and the like. The operating parts are usually housed in a protective inclosure. It may include air flow directing accessories and a means to hang the item. Excludes DRIER,ELECTRIC,HAND.
What is a Sewer Cleaning Root Saw? 15 Items: A Sewer Cleaning Root Saw (SAW,ROOT,SEWER CLEANING) is a rotating tool specifically designed as an accessory for a sewer cleaning machine. It is a continuous, rigid, circular band with teeth on the front and back edges, is center mounted on a shank/shaft, forming a peripheral shaped cutter-shredder. The rotating shaft/shank also has teeth that work as a pull back to accommodate the removal of roots and solid debris that has been cut. Must be rotated by power equipment. For items with spiral blade see AUGER, PIPE CLEANING, SEWER.
What is a Blast Cleaning Machine Parts Kit? 12 Items: A Blast Cleaning Machine Parts Kit (PARTS KIT,BLAST CLEANING MACHINE) is a parts kit used to replace worn and/or damaged parts of a BLAST CLEANING MACHINE.
What is a Hose Assembly Machine Chuck Pad? 18 Items: A Hose Assembly Machine Chuck Pad (PAD,CHUCK,HOSE ASSEMBLY MACHINE) is a flat, basically rectangular shaped item specifically designed to be used with a hose assembly machine. One end is notched to match either two or three sides of a standard wrenching facility of a fitting. It is used to tailor the holding capability of the chuck to a given size or range of sizes.
What is a Miscellaneous Maintenance And Repair Shop Equipment Modification Kit? 27 Items: A Miscellaneous Maintenance And Repair Shop Equipment Modification Kit (MODIFICATION KIT,MISCELLANEOUS MAINTENANCE AND REPAIR SHOP EQUIPMENT) is an item or items employed to modify specially designed miscellaneous maintenance and repair shop equipment.
What is a Transportable Maintenance Facility? 17 Items: A Transportable Maintenance Facility (MAINTENANCE FACILITY,TRANSPORTABLE) is the facility is equipped with work benches, storage cabinets, racks, lighting, air conditioning and power to form an electronic repair shop for the maintenance of electronic equipment. The power is usually supplied by a single 10KW Power Unit.
What is a Communications Spares Facility? 20 Items: A Communications Spares Facility (SPARES FACILITY,COMMUNICATIONS) is containes the spare parts required to support the maintenance and repair of communications assets.
What is a Cable Breakout Adapter? 69 Items: A Cable Breakout Adapter (ADAPTER,CABLE BREAKOUT) is an item designed to electrically and physically accommodate cable connectors and the terminations to which the cable would normally be connected, and thereby provide facilities for the insertion of test equipment leads, probes, and the like, for test and/or monitoring of power, intelligence, and the like, that may be on the wire complement of the cable. The item may provide facilities for either series, shunt, or interwire tests of the cable under actual operating conditions.
What is a Test Adapter Set? 29 Items: A Test Adapter Set (ADAPTER SET,TEST) is a grouping of items consisting of two or more ADAPTER (2), TEST. May include a mounting, or other facility for storage and rapid access to individual adapters.
What is a Test Set Coupler? 11 Items: A Test Set Coupler (COUPLER,TEST SET) is a component which provides a means of transfer of electrical energy between a test set and another component(s). See also ADAPTER, TEST.
What is a Test Equipment Dolly? 13 Items: A Test Equipment Dolly (DOLLY,TEST EQUIPMENT) is a hand-propelled device consisting of three or more wheels attached to a frame, and designed for carrying or supporting test equipment. May include facilities for connecting and interconnecting components of the test equipment to obtain electrical operating power or functional utility. Test equipment components are not included.
What is an Antenna Drive Maintenance Fixture? 12 Items: An Antenna Drive Maintenance Fixture (MAINTENANCE FIXTURE,ANTENNA DRIVE) is a device for temporarily supporting and holding an antenna drive unit during repair and/or test.
What is a Magnetic Lifting Tool? 12 Items: A Magnetic Lifting Tool (LIFTING TOOL,MAGNETIC) is a permanent lifting magnet designed to lift, move and fasten various ferrous materials and workpieces.

Stock Items From Supply Class 4940 Page 35 of 44

4940-01-394-0501
Torque Wrench Maintenance Parts Kit

013940501
SW91-34: RNCC: 3 | RNVC: 9

2 Aug 1994

4940-01-394-0491
Air Hose Bracket

013940491
244368N: RNCC: 3 | RNVC: 2
244368: RNCC: 3 | RNVC: 9
A3144164: RNCC: 5 | RNVC: 2

2 Aug 1994

4940-01-393-5210
Hydrotest System

013935210
42330-43244: RNCC: 3 | RNVC: 9

21 Jul 1994

4940-01-392-2751
Steam Cleaner Cover

013922751
07-0413: RNCC: 3 | RNVC: 2

27 Jun 1994

4940-01-391-9262
Steam Cleaning Gun

013919262
407-4-01: RNCC: 3 | RNVC: 2

20 Jun 1994

4940-01-391-3908
Pressure Jet Steam Cleaner

013913908
10E-01 AND HTM-50: RNCC: 3 | RNVC: 2
10E-01 AND HTM-50: RNCC: 3 | RNVC: 9
MODEL 10E-01: RNCC: 5 | RNVC: 9
1102-01: RNCC: 5 | RNVC: 9

9 Jun 1994

4940-01-390-7449
Blast Cleaning Machine Sleeve

013907449
3133K9: RNCC: 3 | RNVC: 2

25 May 1994

4940-01-390-6299
Blast Cleaning Machine

013906299
3133K4: RNCC: 3 | RNVC: 2

23 May 1994

4940-01-390-5561
Test Equipment Dolly

013905561
6370651: RNCC: 3 | RNVC: 2

21 May 1994

4940-01-390-3547
Follower Plate

013903547
66469: RNCC: 3 | RNVC: 9
66469: RNCC: C | RNVC: 1

17 May 1994

4940-01-389-9033
Electromagnetic Shielding Enclosure

013899033
900693R: RNCC: 3 | RNVC: 2

6 May 1994

4940-01-389-3108
Blast Cleaning Cabinet Cylinder

013893108
15971: RNCC: 3 | RNVC: 9

21 Apr 1994

4940-01-389-2991
Blast Cleaning Cabinet Impeller

013892991
12334: RNCC: 3 | RNVC: 2
12334: RNCC: 3 | RNVC: 9

21 Apr 1994

4940-01-194-3451
Air Blow Gun

011943451
GA299: RNCC: 3 | RNVC: 2

13 Nov 1984

4940-01-389-0767
Coil Wrap Insulation

013890767
AGI-0010: RNCC: 3 | RNVC: 2

15 Apr 1994

4940-01-389-0548
Hose Reel Assembly

013890548
D735: RNCC: 3 | RNVC: 2
53821-4: RNCC: 3 | RNVC: 2
53821-4: RNCC: 3 | RNVC: 9
D735: RNCC: 5 | RNVC: 9

14 Apr 1994

4940-01-388-9442
Trailer Mounted Cleaning Compound Spraying Unit

013889442
SK6632: RNCC: 3 | RNVC: 2

13 Apr 1994

4940-01-388-5086
Hydraulic Torque Wrench Link

013885086
SW90B: RNCC: 3 | RNVC: 9
SW90B: RNCC: C | RNVC: 1

1 Apr 1994

4940-01-388-0206
Field Service Kit Storage Bag

013880206
110MFS000: RNCC: 3 | RNVC: 2
110MFS000: RNCC: 5 | RNVC: 9

17 Mar 1994

4940-01-387-8194
Hydraulic System Components Test Stand

013878194
G780014: RNCC: 3 | RNVC: 9
G440025: RNCC: 5 | RNVC: 9

13 Mar 1994

4940-01-387-8181
Ultrasonic Cleaner

013878181
CC-1825: RNCC: 3 | RNVC: 2
05-008-550D: RNCC: 5 | RNVC: 9

13 Mar 1994

4940-01-387-8043
Ultrasonic Cleaner

013878043
08-009-000: RNCC: 3 | RNVC: 2

13 Mar 1994

4940-01-387-5852
Blast Cleaning Machine Parts Kit

013875852
MB1274-3: RNCC: 3 | RNVC: 2

8 Mar 1994

4940-01-189-6023
Heat Gun Sleeve Reflector

011896023
491878: RNCC: 3 | RNVC: 2

17 Sep 1984

4940-01-386-8358
Blast Cleaning Cabinet

013868358
LB 4024: RNCC: 3 | RNVC: 2

16 Feb 1994

4940-01-386-6108
Truck Bushing Beam Tool Set

013866108
1764: RNCC: 3 | RNVC: 2

9 Feb 1994

4940-01-386-3442
Blast Cleaning Cabinet

013863442
3Z850: RNCC: 3 | RNVC: 2

3 Feb 1994

4940-01-385-9027
Air Blow Gun

013859027
AA60-3/8: RNCC: 3 | RNVC: 2
AA60-318 3/8: RNCC: 5 | RNVC: 9

21 Jan 1994

4940-01-385-2624
Work Table Top

013852624
12535458-3: RNCC: 3 | RNVC: 2

7 Jan 1994

4940-01-385-2607
Work Table Top

013852607
12535458-4: RNCC: 3 | RNVC: 2

7 Jan 1994

4940-01-384-6534
Blast Cleaning Machine

013846534
MODEL 19: RNCC: 3 | RNVC: 2

20 Dec 1993

4940-01-384-6448
Mechanical Test Adapter

013846448
C509-301-005: RNCC: 3 | RNVC: 1
C509-301-005 S/N1596: RNCC: 3 | RNVC: 2

20 Dec 1993

4940-01-184-4691
Paint Spray Gun

011844691
SG312: RNCC: 3 | RNVC: 9

18 Jul 1984

4940-01-384-1452
Bottom Pan

013841452
GI-0516: RNCC: 3 | RNVC: 2

9 Dec 1993

4940-01-384-1398
Fuel Tank

013841398
GP-4004: RNCC: 3 | RNVC: 2

9 Dec 1993

4940-01-384-1240
Platform Lift

013841240
2622T75: RNCC: 3 | RNVC: 2

8 Dec 1993

4940-01-383-6287
Steam Cleaner Control Panel

013836287
GP-0009: RNCC: 3 | RNVC: 2

26 Nov 1993

4940-01-383-5207
Paint Spray Gun Nozzle Kit

013835207
AGI-0042: RNCC: 3 | RNVC: 2

25 Nov 1993

4940-01-383-1527
Mechanical Equipment Test Fixture

013831527
298880-1: RNCC: 3 | RNVC: 2

19 Nov 1993

4940-01-382-9880
Positioning Table

013829880
717719440-001: RNCC: 1 | RNVC: 2
SL7698: RNCC: 3 | RNVC: 2

15 Nov 1993

4940-01-180-4157
Detector Block Assembly

011804157
10070-C117: RNCC: 3 | RNVC: 9

29 May 1984

4940-01-381-9534
Maintenance Facility

013819534
01-2731517-3: RNCC: 3 | RNVC: 2

26 Oct 1993

4940-01-380-9488
Mechanical Test Adapter Kit

013809488
21C2380G001: RNCC: 3 | RNVC: 2
21C2380G001: RNCC: 5 | RNVC: 2

30 Sep 1993

4940-01-174-9578
Blast Cleaning Machine

011749578
4848D/C-9: RNCC: 3 | RNVC: 2

24 Mar 1984

4940-01-379-7277
Transportable Maintenance Facility

013797277
0A9141TSM170: RNCC: 3 | RNVC: 2
0129488: RNCC: 5 | RNVC: 9

7 Sep 1993

4940-01-379-0926
Breech Adapter Assy

013790926
152010-1: RNCC: 3 | RNVC: 2

4 Apr 2002

4940-01-378-8910
Electric Vulcanizing Unit

013788910
HD4800: RNCC: 3 | RNVC: 2

23 Aug 1993

4940-01-378-8858
Electric Vulcanizing Unit

013788858
HD8800: RNCC: 3 | RNVC: 2

23 Aug 1993

4940-01-377-1733
Electromagnetic Shielding Enclosure

013771733
G382855-1: RNCC: 3 | RNVC: 2
G382855-1: RNCC: 5 | RNVC: 9

6 Jul 1993

4940-01-376-1601
Pressure Test Adapter

013761601
884Y: RNCC: 3 | RNVC: 2

27 May 1993

4940-01-376-1232
Revolving Shaft Liquid Mixer

013761232
C-1.0: RNCC: 3 | RNVC: 2

27 May 1993

4940-01-375-7311
Armature And Undercutter Lathe

013757311
SP-B15-160: RNCC: 3 | RNVC: 2

20 May 1993

4940-01-375-4572
General Purpose Shop Equipment

013754572
8159-200SC: RNCC: 3 | RNVC: 2
A-8159-02: RNCC: 5 | RNVC: 2

11 May 1993

4940-01-374-4769
Armature And Undercutter Lathe

013744769
EP/3: RNCC: 3 | RNVC: 2

23 Apr 1993

4940-01-162-0950
Calibrated Leak

011620950
0981-F8473-302: RNCC: 3 | RNVC: 2

14 Sep 1983

4940-01-373-5955
Spray Gun Air Cap

013735955
223-167: RNCC: 3 | RNVC: 2

8 Apr 1993

4940-01-373-5956
Spray Gun Faceplate Adapter

013735956
PWA70758: RNCC: 3 | RNVC: 2
PWA 70758: RNCC: 5 | RNVC: 2
PWA 70758: RNCC: 5 | RNVC: 9

8 Apr 1993

4940-01-373-2773
Dipping-Draining Basket

013732773
RA53300B: RNCC: 3 | RNVC: 2

31 Mar 1993

4940-01-373-0125
Electromagnetic Shielding Enclosure

013730125
7588C33GP1: RNCC: 3 | RNVC: 1

25 Mar 1993

4940-01-372-8253
Positioning Table

013728253
717751169-009: RNCC: 3 | RNVC: 2

19 Mar 1993

4940-01-372-7362
Portable Hydraulic Press

013727362
Q235H: RNCC: 3 | RNVC: 2
Q235H: RNCC: 5 | RNVC: 9

17 Mar 1993

4940-01-372-6241
Electrical Test And Maintenance Table

013726241
5854725: RNCC: 3 | RNVC: 2

13 Mar 1993

4940-01-372-1463
Finishing-Material Pressure-Feed Tank

013721463
37515: RNCC: 3 | RNVC: 2
00434-IUF8: RNCC: 5 | RNVC: 9

3 Mar 1993

4940-01-157-8119
Cold Dip Tank

011578119
I41884: RNCC: 3 | RNVC: 9
R-TBD-402: RNCC: 5 | RNVC: 9
LE286-0006-0001: RNCC: 5 | RNVC: 9

12 Jul 1983

4940-01-371-2737
Test Adapter

013712737
87500310: RNCC: 3 | RNVC: 2

9 Feb 1993

4940-01-370-6691
Internal Boiler Tube And Flue Cleaner

013706691
51045: RNCC: 3 | RNVC: 2

28 Jan 1993

4940-01-370-6164
Test Adapter

013706164
J38500-87: RNCC: 3 | RNVC: 2

27 Jan 1993

4940-01-370-4134
Mechanical Test Adapter

013704134
3C3484P21: RNCC: 1 | RNVC: 2
2198000F118: RNCC: 3 | RNVC: 2

21 Jan 1993

4940-01-369-9996
Nest Alignment Fixture

013699996
N0068-A003-SB: RNCC: 3 | RNVC: 9
N0068-A003-SB: RNCC: 5 | RNVC: 2

10 Jan 1993

4940-01-369-9161
Sewer Cutter Blade Set

013699161
131.000.796: RNCC: 3 | RNVC: 2
BM19.000.871 ITEM 201: RNCC: 5 | RNVC: 2
17.001.845: RNCC: D | RNVC: 9

8 Jan 1993

4940-01-369-7856
Hose Reel Assembly

013697856
V800025000: RNCC: 3 | RNVC: 9

6 Jan 1993

4940-01-369-7367
Electromagnetic Shielding Enclosure

013697367
10-5106: RNCC: 3 | RNVC: 1

4 Jan 1993

4940-01-369-4939
Test Equipment Dolly

013694939
6239823: RNCC: 3 | RNVC: 2

23 Dec 1992

4940-01-150-3113
Electrical Equipment Shop Equipment

011503113
85236: RNCC: 3 | RNVC: 9
85236: RNCC: C | RNVC: 1

4 Apr 1983

4940-01-368-2237
Transportable Maintenance Facility

013682237
0A9142TSM170: RNCC: 3 | RNVC: 2
010360: RNCC: 5 | RNVC: 2

27 Nov 1992

4940-01-368-2238
Transportable Maintenance Facility

013682238
0A9143TSM170: RNCC: 3 | RNVC: 2
0130900: RNCC: 5 | RNVC: 2

27 Nov 1992

4940-01-368-2214
Transportable Maintenance Facility

013682214
0A9144TSM170: RNCC: 3 | RNVC: 2
0130913: RNCC: 5 | RNVC: 2

27 Nov 1992

4940-01-367-4652
Maintenance Platform

013674652
650-03: RNCC: 3 | RNVC: 2
650-03: RNCC: 3 | RNVC: 9

12 Nov 1992

4940-01-365-3956
Demagnetizer

013653956
20027-04: RNCC: 3 | RNVC: 2

6 Oct 1992

4940-01-365-2234
Mechanical Test Adapter

013652234
68D261297-1001: RNCC: 3 | RNVC: 2

3 Oct 1992

4940-01-364-5531
Platform Lift

013645531
5580125: RNCC: 3 | RNVC: 2
101-5580125: RNCC: 5 | RNVC: 2

22 Sep 1992

4940-01-363-7152
Air Blow Gun

013637152
1-971-06: RNCC: 3 | RNVC: 2

4 Sep 1992

4940-01-363-3744
Safety Extension Tip

013633744
UPC 13200: RNCC: 3 | RNVC: 2

28 Aug 1992

4940-01-361-8205
Fuel Can Cleaning Machine

013618205
823-2902: RNCC: 3 | RNVC: 2
823-2902: RNCC: 5 | RNVC: 2
E110: RNCC: C | RNVC: 1

26 Jul 1992

4940-01-361-6013
Portable Electric Blower

013616013
5855029: RNCC: 3 | RNVC: 2
6508416: RNCC: 5 | RNVC: 9

21 Jul 1992

4940-01-361-2841
Patch Panel C0ver

013612841
40A90236-1: RNCC: 3 | RNVC: 2
40A90236-1: RNCC: 5 | RNVC: 9
40A90236: RNCC: D | RNVC: 9

13 Jul 1992

4940-01-360-5219
Blast Machine Pair Gloves

013605219
88-620: RNCC: 3 | RNVC: 2

25 Jun 1992

4940-01-360-1536
Mechanical Test Adapter

013601536
298145-1: RNCC: 3 | RNVC: 2
298145-1: RNCC: 5 | RNVC: 2

18 Jun 1992

4940-01-360-0770
Mechanical Test Adapter

013600770
17G240068-1: RNCC: 3 | RNVC: 2

17 Jun 1992

4940-01-359-7049
Electromagnetic Shielding Enclosure

013597049
1224D0571-1: RNCC: 3 | RNVC: 2
1224D0571: RNCC: 5 | RNVC: 2
1224D0571: RNCC: 5 | RNVC: 9
1224D0571-1: RNCC: 5 | RNVC: 9

10 Jun 1992

4940-01-359-3204
Test Set Case

013593204
F278-5751-1: RNCC: 3 | RNVC: 2

3 Jun 1992

4940-01-359-0637
Multiposition Maintenance Fixture Holder

013590637
CL-202-TC: RNCC: 3 | RNVC: 2

28 May 1992

4940-01-358-9016
Spray Gun Parts Kit

013589016
1001AA-00-058: RNCC: 3 | RNVC: 2
32417: RNCC: 5 | RNVC: 2
1B-000304WW: RNCC: 5 | RNVC: 9
1AA-00-058: RNCC: 5 | RNVC: 9

22 May 1992

4940-01-358-4353
Steam Cleaning Gun

013584353
406-26-01: RNCC: 3 | RNVC: 9
8.904-444.0: RNCC: 5 | RNVC: 2

14 May 1992

4940-01-358-0151
Positioning Table

013580151
152F091: RNCC: 3 | RNVC: 2

6 May 1992

4940-01-124-5914
Electromagnetic Shielding Enclosure

011245914
81-X3.5: RNCC: 3 | RNVC: 9

8 Jan 1982

4940-01-357-5984
Hose Reel Assembly

013575984
C672573: RNCC: 3 | RNVC: 2

27 Apr 1992

4940-01-356-4597
Shop Maintenance Tray

013564597
4738T2: RNCC: 3 | RNVC: 2

4 Apr 1992

4940-01-356-2683
Shop Maintenance Tray

013562683
4738T41: RNCC: 3 | RNVC: 2

1 Apr 1992

4940-01-354-2783
Electromagnetic Shielding Enclosure

013542783
1223D0570-1: RNCC: 3 | RNVC: 2
1223D0570-1: RNCC: 3 | RNVC: 9

26 Feb 1992

4940-01-351-8592
Linear Translation Stage

013518592
357494: RNCC: 3 | RNVC: 2

16 Jan 1992

4940-01-351-6556
Work Station Mat

013516556
SP1800K: RNCC: 3 | RNVC: 2
0SK1250: RNCC: 5 | RNVC: 9

14 Jan 1992

4940-01-110-9560
Sh Electronic Shop

011109560
SC-DL-577800: RNCC: 3 | RNVC: 9
AN/ASM-146C: RNCC: 5 | RNVC: 2
SC-DL-577800: RNCC: 5 | RNVC: 2

8 Apr 1981

4940-01-351-2155
Test Adapter

013512155
61253-41050: RNCC: 3 | RNVC: 2

3 Jan 1992

4940-01-109-6557
Electromagnetic Shielding Enclosure

011096557
405821: RNCC: 3 | RNVC: 2
405821: RNCC: 5 | RNVC: 9

19 Mar 1981

4940-01-350-4014
Mechanical Equipment Test Fixture

013504014
5014130: RNCC: 3 | RNVC: 2

14 Dec 1991

4940-01-350-3466
Mechanical Equipment Test Fixture

013503466
5268675: RNCC: 3 | RNVC: 2
5268675: RNCC: 5 | RNVC: 2

13 Dec 1991

4940-01-350-1513
Test Adapter

013501513
41007783: RNCC: 3 | RNVC: 2

11 Dec 1991

4940-01-348-9646
Portable Electric Blower

013489646
98900: RNCC: 3 | RNVC: 2

19 Nov 1991

4940-01-348-6478
Positioning Table

013486478
UT100.50CCM: RNCC: 3 | RNVC: 9
357495: RNCC: 5 | RNVC: 9
UT100.50CC: RNCC: C | RNVC: 1

14 Nov 1991

4940-01-348-6477
Positioning Table

013486477
357491: RNCC: 3 | RNVC: 9
UR100CCM: RNCC: 5 | RNVC: 9

14 Nov 1991

4940-01-347-4814
Pneumatic Stator Coil Cutter

013474814
E-5127 CUTTER: RNCC: 3 | RNVC: 2
5127 CUTTER: RNCC: 3 | RNVC: 9

23 Oct 1991

4940-01-347-1031
Spray Gun Handle

013471031
1-71-26: RNCC: 3 | RNVC: 2

16 Oct 1991

4940-01-346-4333
Gun Housing

013464333
220-963: RNCC: 3 | RNVC: 2

5 Oct 1991

4940-01-346-2555
Unit Pump

013462555
W10CAS: RNCC: 3 | RNVC: 2

1 Oct 1991

4940-01-345-9692
Mechanical Test Adapter

013459692
9458M14G02: RNCC: 3 | RNVC: 2
9458M14G02: RNCC: 5 | RNVC: 2

25 Sep 1991

4940-01-345-6416
Self Pressurized Spray Kit

013456416
8000: RNCC: 3 | RNVC: 9

23 Sep 1991

4940-01-345-2014
Propeller Balancing Arbor

013452014
HS9381: RNCC: 3 | RNVC: 2

13 Sep 1991

4940-01-345-2013
Propeller Balancing Arbor

013452013
HS9380: RNCC: 3 | RNVC: 2

13 Sep 1991

4940-01-344-1054
Hose Reel Assembly

013441054
3020-24-26: RNCC: 3 | RNVC: 2

23 Aug 1991

4940-01-343-5909
Spraying Booth

013435909
BB-6: RNCC: 3 | RNVC: 2
DF-6221: RNCC: 5 | RNVC: 9

15 Aug 1991

4940-01-343-2170
Tube Guide

013432170
3C3039P03: RNCC: 3 | RNVC: 2
3C3039: RNCC: D | RNVC: 9

8 Aug 1991

4940-01-343-2152
Sprayer Assembly

013432152
51324: RNCC: 3 | RNVC: 2

8 Aug 1991

4940-01-343-1900
Mechanical Test Adapter

013431900
45-0405-1: RNCC: 3 | RNVC: 2
42-0405-1: RNCC: 5 | RNVC: 9

7 Aug 1991

4940-01-342-8709
Metal Working Shop Equipment

013428709
1100: RNCC: 3 | RNVC: 2

31 Jul 1991

4940-01-342-1401
Mechanical Test Adapter

013421401
636167: RNCC: 3 | RNVC: 2

16 Jul 1991

4940-01-341-3978
Stator Maintenance Stand

013413978
E-5128 STAND: RNCC: 3 | RNVC: 2

27 Jun 1991

4940-01-340-9647
Hydraulic System Components Test Stand

013409647
500-845: RNCC: 3 | RNVC: 2

23 Jun 1991

4940-01-340-9595
Stem Expander Assembly

013409595
5P5233: RNCC: 3 | RNVC: 2

23 Jun 1991

4940-01-092-3891
Degreaser

010923891
906SH: RNCC: 3 | RNVC: 2

25 Mar 1980

4940-01-340-6533
Mechanical Test Adapter Kit

013406533
3131AS100-1: RNCC: 3 | RNVC: 2

18 Jun 1991

4940-01-340-0079
Hydraulic System Components Test Stand

013400079
HPTS-001: RNCC: 3 | RNVC: 2
05123-JP: RNCC: 5 | RNVC: 2

5 Jun 1991

4940-01-339-8583
Mechanical Test Adapter Kit

013398583
123SME50793-1: RNCC: 3 | RNVC: 2
123SME50793-1: RNCC: 5 | RNVC: 9
123SME50793: RNCC: D | RNVC: 9

2 Jun 1991

4940-01-339-8582
Mechanical Test Adapter Kit

013398582
123SME50792-1: RNCC: 3 | RNVC: 2
123SME50792-1: RNCC: 5 | RNVC: 9
123SME50792: RNCC: D | RNVC: 9

2 Jun 1991

4940-01-339-8581
Mechanical Test Adapter Kit

013398581
123SME50791-1: RNCC: 3 | RNVC: 2
123SME50791-1: RNCC: 5 | RNVC: 2
123SME50791-1: RNCC: 5 | RNVC: 9
123SME50791: RNCC: D | RNVC: 9

2 Jun 1991

4940-01-339-7921
Pneumatic Cleaning Gun

013397921
5370USGK1: RNCC: 3 | RNVC: 2
5370: RNCC: 5 | RNVC: 9

30 May 1991

4940-01-339-7518
Mechanical Test Adapter

013397518
PWA34885: RNCC: 3 | RNVC: 2
PWA14948: RNCC: E | RNVC: 8

29 May 1991

4940-01-338-7681
Degreaser

013387681
742839: RNCC: 3 | RNVC: 9

10 May 1991

4940-01-338-3909
Pneu Winding Puller

013383909
SW-1000AH-20: RNCC: 3 | RNVC: 2
SW1000: RNCC: 3 | RNVC: 9
MODEL 1000: RNCC: 5 | RNVC: 9

3 May 1991

4940-01-338-2706
Dagger Pin

013382706
8908452-1: RNCC: 3 | RNVC: 2
8908452-1: RNCC: 5 | RNVC: 9

30 Apr 1991

4940-01-338-2583
Maintenance Platform

013382583
1509E82G01: RNCC: 3 | RNVC: 2

28 Apr 1991

4940-01-338-1198
Nonelectric Wheel Balancer

013381198
75200: RNCC: 3 | RNVC: 2

26 Apr 1991

4940-01-337-5343
Ultrasonic Generator

013375343
GU-301-DR: RNCC: 3 | RNVC: 2
1185AS143-1: RNCC: 5 | RNVC: 2
1185AS143: RNCC: 7 | RNVC: 1

16 Apr 1991

4940-01-337-4636
Frame Power

013374636
40417: RNCC: 3 | RNVC: 2

16 Apr 1991

4940-01-337-2980
Container Bearing

013372980
3C3083P08: RNCC: 3 | RNVC: 2
3C3083: RNCC: D | RNVC: 9

12 Apr 1991

4940-01-337-0645
Drip Pan

013370645
8014102: RNCC: 3 | RNVC: 2
8014102: RNCC: 5 | RNVC: 9

9 Apr 1991

4940-01-337-0644
Drip Pan

013370644
8014101: RNCC: 3 | RNVC: 2
8014101: RNCC: 5 | RNVC: 2

9 Apr 1991

4940-01-337-0643
Drip Pan

013370643
8014100: RNCC: 3 | RNVC: 2

9 Apr 1991

4940-01-084-7170
Ultrasonic Cleaner

010847170
ME 18: RNCC: 3 | RNVC: 9

24 Oct 1979

4940-01-336-3340
Electronic Equipment Shop Equipment

013363340
7598150G1: RNCC: 3 | RNVC: 9

24 Mar 1991

4940-01-336-0498
Dust Bag

013360498
000907: RNCC: 3 | RNVC: 2

19 Mar 1991

4940-01-335-9701
Electronic Equipment Shop Equipment

013359701
7598176G1: RNCC: 3 | RNVC: 9

17 Mar 1991

4940-01-335-9699
Electronic Equipment Shop Equipment

013359699
7597797G1: RNCC: 3 | RNVC: 9

17 Mar 1991

4940-01-335-9700
Electronic Equipment Shop Equipment

013359700
7598173G1: RNCC: 3 | RNVC: 9

17 Mar 1991

4940-01-335-9698
Electronic Equipment Shop Equipment

013359698
7597770G1: RNCC: 3 | RNVC: 9

17 Mar 1991

4940-01-335-9696
Electronic Equipment Shop Equipment

013359696
7597767G1: RNCC: 3 | RNVC: 9

17 Mar 1991

4940-01-335-9695
Electronic Equipment Shop Equipment

013359695
7597766G1: RNCC: 3 | RNVC: 9

17 Mar 1991

4940-01-335-9697
Electronic Equipment Shop Equipment

013359697
7597769G1: RNCC: 3 | RNVC: 9

17 Mar 1991

4940-01-335-7800
Paint Spray Gun Fluid Nozzle

013357800
TP9510: RNCC: 3 | RNVC: 2
1185AS163-1: RNCC: 5 | RNVC: 2
1185AS163: RNCC: D | RNVC: 9

13 Mar 1991

4940-01-335-4478
Mechanical Equipment Test Fixture

013354478
803-5959303-X-150-153,176,177: RNCC: 3 | RNVC: 2
5959303-150-153,176,177: RNCC: 5 | RNVC: 2
524-6603688-VHBA-150-155: RNCC: 5 | RNVC: 2

8 Mar 1991

4940-01-334-3985
Coil Winding Machine

013343985
SYS325A: RNCC: 3 | RNVC: 2
SYS325A/460 3PH: RNCC: C | RNVC: 1

21 Feb 1991

4940-01-333-8471
Contact Maintenance Shop Equipment

013338471
DFP376: RNCC: 3 | RNVC: 2

10 Feb 1991

4940-01-333-8470
Contact Maintenance Shop Equipment

013338470
11B250000: RNCC: 3 | RNVC: 2

10 Feb 1991

4940-01-333-3505
Multiposition Maintenance Fixture Holder

013333505
030154: RNCC: 3 | RNVC: 2

31 Jan 1991

4940-01-077-5597
Test Adapter

010775597
1130AS100: RNCC: 3 | RNVC: 2

26 May 1979

4940-01-331-8393
Drip Pan

013318393
820-5348127: RNCC: 3 | RNVC: 1
820-5348164PC329: RNCC: 5 | RNVC: 1

28 Dec 1990

4940-01-331-6179
Mechanical Test Adapter

013316179
2564577: RNCC: 3 | RNVC: 2

21 Dec 1990

4940-01-331-5613
Plastic Repair Kit

013315613
65170-11080-041: RNCC: 3 | RNVC: 2

20 Dec 1990

4940-01-331-4865
Mechanical Test Adapter

013314865
506T738-02: RNCC: 3 | RNVC: 9

20 Dec 1990

4940-01-331-4866
Mechanical Test Adapter

013314866
506T738-05: RNCC: 3 | RNVC: 9

20 Dec 1990

4940-01-331-1895
Ultrasonic Cleaner

013311895
R2518D TYPE F: RNCC: 3 | RNVC: 2
R2518D TYPE F: RNCC: 5 | RNVC: 2

14 Dec 1990

4940-01-330-4858
Mechanical Test Adapter

013304858
502234-001: RNCC: 3 | RNVC: 2

4 Dec 1990

4940-01-330-0746
Drip Pan

013300746
23036093: RNCC: 3 | RNVC: 2

29 Nov 1990

4940-01-329-4410
Antenna Drive Maintenance Fixture

013294410
128SCSEM162-1: RNCC: 1 | RNVC: 3
3814-32000-101: RNCC: 3 | RNVC: 3

16 Nov 1990

4940-01-328-5696
Test Set Case

013285696
3598253-1: RNCC: 3 | RNVC: 2
3598253: RNCC: D | RNVC: 9

4 Nov 1990

4940-01-327-8171
Hose Reel Assembly

013278171
C-15100-22L: RNCC: 3 | RNVC: 2

21 Oct 1990

4940-01-327-7342
Mechanical Test Adapter

013277342
9490M17G01: RNCC: 3 | RNVC: 2
9490M17G01: RNCC: 5 | RNVC: 2
9490M17: RNCC: D | RNVC: 9

21 Oct 1990

4940-01-327-6555
Paint Spray Gun Fluid Nozzle

013276555
182-619: RNCC: 3 | RNVC: 2

18 Oct 1990

4940-01-327-6551
Paint Spray Gun Air Nozzle

013276551
182-411: RNCC: 3 | RNVC: 2

18 Oct 1990

4940-01-327-6094
Ultraviolet Light Heat Gun

013276094
5050: RNCC: 3 | RNVC: 2
5000: RNCC: 5 | RNVC: 2

17 Oct 1990

4940-01-327-4524
Coil Winding Machine

013274524
00906670 ITEM 5: RNCC: 3 | RNVC: 9
00604864: RNCC: 5 | RNVC: 9

14 Oct 1990

4940-01-327-3003
Drip Pan

013273003
717788261-009: RNCC: 3 | RNVC: 2

11 Oct 1990

4940-01-326-5705
Paint Spray Gun Fluid Needle Valve

013265705
106-847: RNCC: 3 | RNVC: 2

27 Sep 1990

4940-01-326-3943
Hydraulic System Components Test Stand

013263943
C103-9000: RNCC: 3 | RNVC: 2

22 Sep 1990

4940-01-325-4460
Mechanical Test Adapter

013254460
11468782: RNCC: 3 | RNVC: 2
11468782: RNCC: 5 | RNVC: 1
11468782: RNCC: 5 | RNVC: 9

5 Sep 1990

4940-01-325-2138
Mechanical Test Adapter

013252138
281980: RNCC: 3 | RNVC: 2

30 Aug 1990

4940-01-058-7328
Refrigerant Gas Leak Detector

010587328
540B: RNCC: 3 | RNVC: 9
5408: RNCC: 5 | RNVC: 9
4940-5316-0000: RNCC: 6 | RNVC: 9

31 Mar 1978

4940-01-325-0742
Hose Reel Assembly

013250742
2272K21: RNCC: 3 | RNVC: 2
2272K41: RNCC: 5 | RNVC: 9

28 Aug 1990

4940-01-324-5695
Portable Electric Blower

013245695
G302472-1: RNCC: 3 | RNVC: 2
ML8M: RNCC: 3 | RNVC: 2
G302472-1: RNCC: 5 | RNVC: 2
G302472-1: RNCC: 5 | RNVC: 9

19 Aug 1990

4940-01-324-3915
Mechanical Test Adapter

013243915
PWA34878: RNCC: 3 | RNVC: 2

19 Aug 1990

4940-01-324-2746
Cylinder Sleeve Setter

013242746
MLH43697G1: RNCC: 3 | RNVC: 2
MLH43697G1: RNCC: 3 | RNVC: 9
MLH43697G1: RNCC: 5 | RNVC: 9

14 Aug 1990

4940-01-324-2745
Cylinder Sleeve Setter

013242745
MLH43696G1: RNCC: 3 | RNVC: 2
MLH43696G1: RNCC: 3 | RNVC: 9
MLH43696G1: RNCC: 5 | RNVC: 9

14 Aug 1990

4940-01-323-9353
Mechanical Test Adapter

013239353
AD40797-1: RNCC: 3 | RNVC: 2

5 Aug 1990

4940-01-323-0550
Mechanical Test Adapter

013230550
4052655G1: RNCC: 3 | RNVC: 2

19 Jul 1990

4940-01-323-0156
Bracket And Chain Assembly

013230156
11020966: RNCC: 3 | RNVC: 2

19 Jul 1990

4940-01-323-0124
Hydraulic Tester

013230124
4223: RNCC: 3 | RNVC: 2

19 Jul 1990

4940-01-322-6293
Spray Gun Parts Kit

013226293
106-851: RNCC: 3 | RNVC: 2

11 Jul 1990

4940-01-322-5269
Blast Cleaning Bag

013225269
00946: RNCC: 3 | RNVC: 2
000946: RNCC: 5 | RNVC: 9

9 Jul 1990

4940-01-322-5268
Air Vibrator

013225268
00944: RNCC: 3 | RNVC: 2
000944: RNCC: 5 | RNVC: 9

9 Jul 1990

4940-01-322-3778
Test Adapter

013223778
61253-41040: RNCC: 3 | RNVC: 2

3 Jul 1990

4940-01-321-9245
Paint Nozzle Spray Tip

013219245
182-315: RNCC: 3 | RNVC: 2

26 Jun 1990

4940-01-321-7675
Pressure Jet Steam Cleaner

013217675
TRAC321-2RPW-M-NSU/FW-M-LHS: RNCC: 3 | RNVC: 2
TRAC 321-2RPW-M-NSU: RNCC: 5 | RNVC: 9
SK-2864: RNCC: 5 | RNVC: 9
8884: RNCC: 5 | RNVC: 9

23 Jun 1990

4940-01-320-8784
Maintenance Platform

013208784
7995T5: RNCC: 3 | RNVC: 2

5 Jun 1990

4940-01-320-6807
Parallax Eliminator

013206807
2127-2704: RNCC: 3 | RNVC: 9
TL498: RNCC: 5 | RNVC: 9

2 Jun 1990

4940-01-320-2035
Special Bolt Heater

013202035
820-4385208TYPE3: RNCC: 3 | RNVC: 1

22 May 1990

4940-01-046-8719
Test Equipment Dolly

010468719
M-6-W-SP-12-16: RNCC: 3 | RNVC: 9
M-6-W-SP-12-6: RNCC: 5 | RNVC: 9

25 Aug 1977

4940-01-319-5551
Mechanical Test Adapter

013195551
AT 520 CTS-5: RNCC: 3 | RNVC: 9
ATI520CTS-5: RNCC: 5 | RNVC: 2

10 May 1990

4940-01-319-5552
Mechanical Test Adapter

013195552
AT 520 CTS-6: RNCC: 3 | RNVC: 9
ATI520CTS-6: RNCC: 5 | RNVC: 2

10 May 1990

4940-01-319-5548
Mechanical Test Adapter

013195548
AT 520 CTS-2: RNCC: 3 | RNVC: 9
ATI520CTS-2: RNCC: 5 | RNVC: 2

10 May 1990

4940-01-319-5374
Hydraulic System Components Test Stand

013195374
1400-200: RNCC: 3 | RNVC: 2

9 May 1990

4940-01-319-2254
Pulling Tool Collar

013192254
908264-3: RNCC: 3 | RNVC: 2
908264-3: RNCC: 3 | RNVC: 9

3 May 1990

4940-01-043-3814
Ultrasonic Cleaner

010433814
AC-144: RNCC: 3 | RNVC: 2
F4940 F600: RNCC: 5 | RNVC: 9
AC-144: RNCC: 5 | RNVC: 9
F4940 F600: RNCC: D | RNVC: 9

23 Jun 1977

4940-01-318-0859
Test Adapter

013180859
MT1658: RNCC: 3 | RNVC: 9

12 Apr 1990

4940-01-317-6985
Positioning Table

013176985
4682319: RNCC: 3 | RNVC: 2

4 Apr 1990

4940-01-041-5679
Foam Cleaning Unit

010415679
9388-1126: RNCC: 3 | RNVC: 2

28 May 1977

4940-01-317-1014
Blast Cleaning Cabinet

013171014
CS-18-18: RNCC: 3 | RNVC: 2

22 Mar 1990

4940-01-316-7924
Maintenance Platform

013167924
AB-1262/G: RNCC: 3 | RNVC: 2
AB-1262/G: RNCC: 5 | RNVC: 9

16 Mar 1990

4940-01-316-7187
Mechanical Test Adapter

013167187
717722617-009: RNCC: 3 | RNVC: 2

14 Mar 1990

4940-01-316-6062
Fan Balance Mandrel

013166062
760003-1-BF: RNCC: 3 | RNVC: 9

13 Mar 1990

4940-01-316-4882
Test Adapter

013164882
G589951: RNCC: 3 | RNVC: 2
G589951: RNCC: 3 | RNVC: 9
G589951: RNCC: 5 | RNVC: 9
G589951: RNCC: 5 | RNVC: 9
PLG589951: RNCC: D | RNVC: 9

9 Mar 1990

4940-01-316-4751
Blasting Unit Gun Body

013164751
153004: RNCC: 3 | RNVC: 9

9 Mar 1990

4940-01-316-0546
Ad Stowage Assembly

013160546
A4W RPPY SK-002: RNCC: 3 | RNVC: 1

2 Mar 1990

4940-01-316-0169
Paint Spray Gun Fluid Nozzle

013160169
182-615: RNCC: 3 | RNVC: 2

1 Mar 1990

4940-01-315-5765
Hose Reel Assembly

013155765
021142: RNCC: 3 | RNVC: 9

20 Feb 1990

4940-01-315-5501
Test Adapter

013155501
8556-43.1: RNCC: 3 | RNVC: 2
8556-43.1: RNCC: 5 | RNVC: 9

18 Feb 1990

4940-01-314-8574
Electromagnetic Shielding Enclosure

013148574
87500314-101: RNCC: 3 | RNVC: 2

7 Feb 1990

4940-01-314-6917
Spray Gun Parts Kit

013146917
54-1989: RNCC: 3 | RNVC: 2

3 Feb 1990

4940-01-033-6634
Flexible Holder

010336634
4871: RNCC: 3 | RNVC: 9

8 Jan 1977

4940-01-033-6633
Flexible Holder

010336633
5192: RNCC: 3 | RNVC: 9

8 Jan 1977

4940-01-033-6632
Flexible Hose Piece

010336632
4097: RNCC: 3 | RNVC: 9

8 Jan 1977

4940-01-033-6631
Flexible Holder

010336631
2330: RNCC: 3 | RNVC: 9

8 Jan 1977

4940-01-033-6612
Flexible Holder

010336612
4291: RNCC: 3 | RNVC: 9

8 Jan 1977

4940-01-033-6611
Flexible Holder

010336611
2862: RNCC: 3 | RNVC: 9

8 Jan 1977

4940-01-314-4403
Paint Spray Gun Fluid Needle Valve

013144403
TGA-452: RNCC: 3 | RNVC: 2

30 Jan 1990

4940-01-314-3199
Mechanical Test Adapter

013143199
9491M41P01: RNCC: 3 | RNVC: 2

27 Jan 1990

4940-01-313-4646
Paint Machine Bearing

013134646
9-3294: RNCC: 3 | RNVC: 2

9 Jan 1990

4940-01-313-4645
Paint Machine Cone

013134645
9-3722: RNCC: 3 | RNVC: 2

9 Jan 1990

4940-01-313-4644
Universal Bearing Assembly

013134644
6-7818-18: RNCC: 3 | RNVC: 2
6-9178: RNCC: 5 | RNVC: 9
6-9178: RNCC: 5 | RNVC: 9

9 Jan 1990

4940-01-029-3373
Flexible U Holder

010293373
2342: RNCC: 3 | RNVC: 9

16 Oct 1976

4940-01-312-2336
Cold Dip Tank

013122336
BTT-4T: RNCC: 3 | RNVC: 2

12 Dec 1989

4940-01-312-0804
Cold Dip Tank

013120804
BTT-215: RNCC: 3 | RNVC: 2

9 Dec 1989

4940-01-311-4018
Cleaning Device

013114018
1 9100-100: RNCC: 3 | RNVC: 2
1 9100-100: RNCC: 5 | RNVC: 2

25 Nov 1989

4940-01-311-0140
Hose Expansion Ring Expander

013110140
5P0973: RNCC: 3 | RNVC: 2
5S2827: RNCC: 5 | RNVC: 9
5P973: RNCC: D | RNVC: 9

17 Nov 1989

4940-01-311-0139
Hose Expansion Ring Expander

013110139
5S2837: RNCC: 3 | RNVC: 2

17 Nov 1989

4940-01-310-4367
Blast Cleaning Machine

013104367
24WB: RNCC: 3 | RNVC: 9

4 Nov 1989

4940-01-310-1805
Blast Cleaning Seat

013101805
AQ-P-85: RNCC: 3 | RNVC: 2
AQ-P-85D: RNCC: 5 | RNVC: 9

31 Oct 1989

4940-01-310-0457
Ultrasonic Cleaner Trigger

013100457
T2A: RNCC: 3 | RNVC: 2

29 Oct 1989

4940-01-309-4488
Maintenance Platform

013094488
6-2-2403: RNCC: 3 | RNVC: 2

18 Oct 1989

4940-01-018-9265
Ultrasonic Cleaner

010189265
ME4.6: RNCC: 3 | RNVC: 9

2 Apr 1976

4940-01-308-0761
Platform Lift

013080761
361200: RNCC: 3 | RNVC: 9

22 Sep 1989

4940-01-305-7915
Condenser Coil Assembly

013057915
1-022-S: RNCC: 3 | RNVC: 1

11 Aug 1989

4940-01-006-5611
Hydraulic Hose Assembly Tester

010065611
MIL-T-25456B: RNCC: 3 | RNVC: 2
AF82PD348A: RNCC: 5 | RNVC: 9
MIL-T-25456: RNCC: 5 | RNVC: 9
AF82PD348A: RNCC: D | RNVC: 9
MIL-T-25456B: RNCC: D | RNVC: 9
MIL-T-25456: RNCC: D | RNVC: 9

18 Jul 1975

4940-01-303-0094
Blast Cleaning Machine

013030094
3636-4: RNCC: 3 | RNVC: 2

23 Jun 1989

4940-01-303-0069
Solvent-Water Pressure Cleaner

013030069
X-20ES: RNCC: 3 | RNVC: 2

23 Jun 1989

4940-01-302-9899
Mechanical Test Adapter

013029899
145G0151-1: RNCC: 3 | RNVC: 2

22 Jun 1989

4940-01-302-9065
Ultrasonic Cleaner

013029065
WRD-2512-FC2-C1: RNCC: 3 | RNVC: 2
WRD2512-FC2: RNCC: 5 | RNVC: 9

21 Jun 1989

4940-01-302-3218
Rotary Actuator Test Stand

013023218
58313-61480: RNCC: 3 | RNVC: 2
58313-61480: RNCC: 5 | RNVC: 2

13 Jun 1989

4940-01-301-4720
Hydraulic System Components Test Stand

013014720
C-12T182-01: RNCC: 3 | RNVC: 2
HP-6000-TR: RNCC: 5 | RNVC: 2
4940-5579-6101: RNCC: 6 | RNVC: 9

29 May 1989

4940-01-301-4462
Portable Hydraulic Press

013014462
Q236H: RNCC: 3 | RNVC: 2
Q236H: RNCC: 5 | RNVC: 9
4940-0000-0000: RNCC: 6 | RNVC: 9

28 May 1989

4940-01-301-2973
Mixing Chamber

013012973
PT1523: RNCC: 3 | RNVC: 2

26 May 1989

4940-01-299-7073
Marine Propulsion Bearing Puller

012997073
431028: RNCC: 3 | RNVC: 2

4 May 1989

4940-01-299-7077
Marine Propulsion Bearing Puller

012997077
431032: RNCC: 3 | RNVC: 2

4 May 1989

4940-01-299-7074
Marine Propulsion Bearing Puller

012997074
431029: RNCC: 3 | RNVC: 2

4 May 1989

4940-01-299-7075
Marine Propulsion Bearing Puller

012997075
431030: RNCC: 3 | RNVC: 2

4 May 1989

4940-01-299-7076
Marine Propulsion Bearing Puller

012997076
431031: RNCC: 3 | RNVC: 2

4 May 1989

4940-01-299-4095
Ultrasonic Cleaner

012994095
WRD-2518: RNCC: 3 | RNVC: 2
WRD-26636: RNCC: C | RNVC: 1

30 Apr 1989

4940-01-298-5341
Tool Sleeve

012985341
63-C1148-9-1: RNCC: 3 | RNVC: 2

18 Apr 1989

4940-01-298-4407
Shop Maintenance Tray

012984407
300-001-10057: RNCC: 3 | RNVC: 2

16 Apr 1989

4940-01-298-3000
Test Adapter

012983000
C5107636: RNCC: 3 | RNVC: 9

14 Apr 1989

4940-01-298-3001
Test Adapter

012983001
C5107627: RNCC: 3 | RNVC: 9

14 Apr 1989

4940-01-298-2999
Test Adapter

012982999
C5107633: RNCC: 3 | RNVC: 9

14 Apr 1989

4940-01-298-2998
Test Adapter

012982998
C5107665: RNCC: 3 | RNVC: 9

14 Apr 1989

4940-01-297-5289
Hose Assembly Machine Chuck Pad

012975289
1583-1-40: RNCC: 3 | RNVC: 2

4 Apr 1989

4940-01-297-5290
Hose Assembly Machine Chuck Pad

012975290
1583-1-48: RNCC: 3 | RNVC: 2

4 Apr 1989

4940-01-296-8018
Heater Shell Refractory

012968018
7803-03: RNCC: 3 | RNVC: 2

24 Mar 1989

4940-01-296-5976
Degreaser

012965976
C5224E: RNCC: 3 | RNVC: 2

22 Mar 1989

4940-01-296-2938
Machine Fitting Assembly

012962938
FT1222-2-55: RNCC: 3 | RNVC: 2

17 Mar 1989

4940-01-295-1554
Cable Breakout Adapter

012951554
370AS001NF3612H6: RNCC: 3 | RNVC: 2

1 Mar 1989

4940-01-295-1553
Cable Breakout Adapter

012951553
370AS001NF1806H6: RNCC: 3 | RNVC: 2
370AS001HF1806H 6: RNCC: C | RNVC: 1

1 Mar 1989

4940-01-294-3347
Sheave Adapter

012943347
13217E1055: RNCC: 3 | RNVC: 2

15 Feb 1989

4940-01-294-1122
Blast Cleaning Cabinet

012941122
114011: RNCC: 3 | RNVC: 2

10 Feb 1989

4940-01-293-5615
Transportable Electronic Shop

012935615
A3070220-3: RNCC: 3 | RNVC: 2
AN/TSM-191(V)2: RNCC: 5 | RNVC: 2
A3070220: RNCC: 5 | RNVC: 9

3 Feb 1989

4940-01-293-3277
Lens Cleaning And Inspecting Booth

012933277
717801849-001: RNCC: 3 | RNVC: 2

31 Jan 1989

4940-01-292-8631
Air Blow Gun

012928631
505411: RNCC: 3 | RNVC: 2

23 Jan 1989

4940-01-292-5539
Positioning Table

012925539
717702524-009: RNCC: 3 | RNVC: 2

18 Jan 1989

4940-00-977-9908
Trailer Mounted Pressure Jet Steam Cleaner

009779908
GS500: RNCC: 3 | RNVC: 9
MIL-C-4036: RNCC: 4 | RNVC: 1

7 Oct 1966

4940-00-977-3434
External Boiler Tube And Flue Cleaner

009773434
EP700-3142: RNCC: 3 | RNVC: 9

7 Oct 1966

4940-00-977-3432
External Boiler Tube And Flue Cleaner

009773432
M1A5021: RNCC: 3 | RNVC: 9

7 Oct 1966

4940-00-977-3430
External Boiler Tube And Flue Cleaner

009773430
J10-4398: RNCC: 3 | RNVC: 9

7 Oct 1966

4940-01-291-0904
Positioning Table

012910904
20-3868: RNCC: 3 | RNVC: 2

22 Dec 1988

4940-01-290-9300
Blast Cleaning Cabinet

012909300
BNP220-3: RNCC: 3 | RNVC: 9

19 Dec 1988

4940-01-290-7860
Maintenance Holder

012907860
6097003: RNCC: 3 | RNVC: 2

16 Dec 1988

4940-01-290-4510
Ultrasonic Cleaning Tank

012904510
HT-5.6: RNCC: 3 | RNVC: 1
HT-1212: RNCC: 5 | RNVC: 1

10 Dec 1988

4940-01-290-2884
Refrigerant Gas Leak Detector

012902884
1237-AD009: RNCC: 3 | RNVC: 2

9 Dec 1988

4940-01-290-2086
Blast Cleaning Machine

012902086
MB1002-1: RNCC: 3 | RNVC: 2
MB1002: RNCC: 5 | RNVC: 9

8 Dec 1988

4940-01-289-9724
Blast Cleaning Machine

012899724
MOD 6.5-R PAT NO.3476440: RNCC: 3 | RNVC: 9
M0D 6-PAT N0.34: RNCC: C | RNVC: 1

3 Dec 1988

4940-01-289-3647
Frame Assembly

012893647
1698AS230: RNCC: 3 | RNVC: 2
G02004: RNCC: C | RNVC: 1
1698AS231: RNCC: D | RNVC: 9
1698AS232: RNCC: D | RNVC: 9

22 Nov 1988

4940-01-289-1387
Degreaser

012891387
3 MALH: RNCC: 3 | RNVC: 2

17 Nov 1988

4940-01-289-1342
Heater

012891342
100921-1: RNCC: 3 | RNVC: 2
1102G68-001C: RNCC: C | RNVC: 1

17 Nov 1988

4940-01-288-5874
Air Blow Gun

012885874
210-890: RNCC: 3 | RNVC: 2

10 Nov 1988

4940-00-969-0206
Joint Assembly

009690206
2243: RNCC: 3 | RNVC: 9

1 Jan 1962

4940-00-969-0194
Head-Vibrator

009690194
21: RNCC: 3 | RNVC: 9

1 Jan 1960

4940-00-969-0193
Head-Vibrator

009690193
25: RNCC: 3 | RNVC: 9

1 Jan 1962

4940-01-288-0863
Degreaser

012880863
3205K10: RNCC: 3 | RNVC: 2

3 Nov 1988

4940-01-287-6874
Paint Spray Outfit

012876874
7837T15: RNCC: 3 | RNVC: 2
7850T14: RNCC: 5 | RNVC: 9

26 Oct 1988

4940-01-287-5528
Cold Dip Tank

012875528
SERIES R6LGX12WDX9DP: RNCC: 3 | RNVC: 1
SERIES R6LGX12WDX9DPIN: RNCC: 5 | RNVC: 1
RP1269: RNCC: 5 | RNVC: 9

23 Oct 1988

4940-01-287-5025
Test Adapter

012875025
T-18546: RNCC: 3 | RNVC: 1
T-18546CP: RNCC: 5 | RNVC: 2

22 Oct 1988

4940-01-287-4421
Testing Hood

012874421
136-42-2273: RNCC: 3 | RNVC: 9
136-42-2273: RNCC: 5 | RNVC: 9

22 Oct 1988

4940-01-287-2508
Electrical Enclosure

012872508
171061-101: RNCC: 3 | RNVC: 2

19 Oct 1988

4940-01-287-0481
Paint Spray Gun Fluid Needle Valve

012870481
219-615: RNCC: 3 | RNVC: 2

13 Oct 1988

4940-01-287-0454
Spray Gun Trigger

012870454
178-454: RNCC: 3 | RNVC: 2

13 Oct 1988

4940-01-287-0458
Air Blow Assembly Gun

012870458
B43-633-2: RNCC: 3 | RNVC: 2
B43-602-2: RNCC: 5 | RNVC: 9

13 Oct 1988

4940-01-287-0456
Spray Gun Needle

012870456
218-697: RNCC: 3 | RNVC: 2

13 Oct 1988

4940-01-287-0449
Spray Gun Parts Kit

012870449
217-526: RNCC: 3 | RNVC: 2

13 Oct 1988

4940-01-286-9575
Degreaser Heater

012869575
811336: RNCC: 3 | RNVC: 9

12 Oct 1988

4940-01-286-9471
Blast Cleaning Machine

012869471
MDL-2504: RNCC: 3 | RNVC: 2

12 Oct 1988

4940-01-286-9412
Fuse Box Cover

012869412
544-8310-003: RNCC: 3 | RNVC: 2

12 Oct 1988

4940-01-286-4441
Blaster Diaphagm

012864441
012-032: RNCC: 3 | RNVC: 2

1 Oct 1988

4940-00-964-1705
Internal Boiler Tube And Flue Cleaner

009641705
ECT262: RNCC: 3 | RNVC: 9

1 Jan 1962

4940-00-964-1704
Internal Boiler Tube And Flue Cleaner

009641704
ECT212: RNCC: 3 | RNVC: 9

1 Jan 1962

4940-00-964-0821
Internal Boiler Tube And Flue Cleaner

009640821
C6: RNCC: 3 | RNVC: 9

1 Jan 1962

4940-01-286-1742
Mechanical Test Adapter Kit

012861742
22S1672: RNCC: 3 | RNVC: 2
22S1672: RNCC: 3 | RNVC: 9

28 Sep 1988

4940-01-286-0295
Flammable Liquid Bench Can

012860295
B-600-D: RNCC: 3 | RNVC: 2

24 Sep 1988

4940-01-286-0286
Preload Fixture

012860286
TL5417: RNCC: 3 | RNVC: 2
TL5417: RNCC: 5 | RNVC: 2

24 Sep 1988

4940-01-285-8121
Ultrasonic Cleaning Machine

012858121
100900-1: RNCC: 3 | RNVC: 2

21 Sep 1988

4940-01-285-3565
Pneumatic Coil Spreader

012853565
15600103003151: RNCC: 3 | RNVC: 2

12 Sep 1988

4940-01-284-8574
Demagnetizer

012848574
1966-1-3355-1: RNCC: 3 | RNVC: 9

2 Sep 1988

4940-01-284-3487
Refrigerant Service Kit

012843487
ST-100/A: RNCC: 3 | RNVC: 2
ST-500: RNCC: 5 | RNVC: 9

23 Aug 1988

4940-01-284-1115
Paint Spray Gun Air Nozzle

012841115
68SSX321: RNCC: 3 | RNVC: 2
68SSX321: RNCC: 5 | RNVC: 9
68SSX321: RNCC: 5 | RNVC: 9

18 Aug 1988

4940-01-284-1083
Nozzle Assembly

012841083
43-07002: RNCC: 3 | RNVC: 2

18 Aug 1988

4940-01-284-0574
Paint Nozzle Spray Tip

012840574
182-511: RNCC: 3 | RNVC: 2

18 Aug 1988

4940-00-957-3589
Pressure Test Valve

009573589
6914-H: RNCC: 3 | RNVC: 9
6914TYPEHVALVE: RNCC: 5 | RNVC: 9

1 Jan 1962

4940-00-957-3588
Pressure Test Valve

009573588
GMP69146: RNCC: 3 | RNVC: 9
6914TYPEFVALVE: RNCC: 5 | RNVC: 9

1 Jan 1962

4940-00-956-8612
Ible Fle Holder

009568612
5712: RNCC: 3 | RNVC: 9

1 Jan 1962

4940-01-282-8571
Paint Spray Gun Air Nozzle

012828571
66S: RNCC: 3 | RNVC: 2

6 Dec 1993

4940-00-952-4256
Pressure Test Valve

009524256
6914TYPEC: RNCC: 3 | RNVC: 9
69144: RNCC: 5 | RNVC: 9

1 Jan 1962

4940-00-952-4163
Pressure Tes Flange

009524163
75482: RNCC: 3 | RNVC: 9
7548TYPEC: RNCC: 5 | RNVC: 9

1 Jan 1962

4940-01-282-6076
Flex Tester Assembly Mask Cage

012826076
136-42-2265: RNCC: 3 | RNVC: 2

19 Jul 1988

4940-01-282-0161
Finger Expander

012820161
5S2805: RNCC: 3 | RNVC: 2

6 Jul 1988

4940-01-281-8291
Steamcleaner Hose Rack

012818291
11024085: RNCC: 3 | RNVC: 2

2 Jul 1988

4940-01-281-7478
Air Blow Gun

012817478
84347: RNCC: 3 | RNVC: 2

30 Jun 1988

4940-01-281-7412
Spray Gun Parts Kit

012817412
218-051: RNCC: 3 | RNVC: 2

30 Jun 1988

4940-01-281-5957
Dipping-Draining Basket

012815957
3860-1: RNCC: 3 | RNVC: 2

28 Jun 1988

4940-01-281-5713
Steam Cleaner Unloader

012815713
JP7116: RNCC: 3 | RNVC: 2

28 Jun 1988

4940-01-281-5361
Door Arm Assembly

012815361
11024873: RNCC: 3 | RNVC: 2

25 Jun 1988

4940-01-281-4450
Lamp Shield

012814450
131633: RNCC: 3 | RNVC: 2

23 Jun 1988

4940-01-281-4430
Spray Gun Parts Kit

012814430
50-6512: RNCC: 3 | RNVC: 9

23 Jun 1988

4940-01-281-3735
Cable Breakout Adapter

012813735
2961530-1: RNCC: 3 | RNVC: 2

22 Jun 1988

4940-01-281-3734
Cable Breakout Adapter

012813734
2961596-1: RNCC: 3 | RNVC: 2

22 Jun 1988

4940-01-281-2488
Air Blow Gun

012812488
84346: RNCC: 3 | RNVC: 2

20 Jun 1988

4940-01-281-2444
Lid Support Pad

012812444
132221: RNCC: 3 | RNVC: 2

20 Jun 1988

4940-01-281-1664
Assembly Clamp Front Voicemitter

012811664
136-42-2264: RNCC: 3 | RNVC: 2

17 Jun 1988

4940-01-281-1325
Blast Cleaning Machine Brush

012811325
84306: RNCC: 3 | RNVC: 2

17 Jun 1988

4940-01-281-1324
Blast Cle Reclaimer

012811324
RCL06380: RNCC: 3 | RNVC: 9

17 Jun 1988

4940-01-281-0783
Jet Assembly Air

012810783
84343: RNCC: 3 | RNVC: 2

17 Jun 1988

4940-01-280-4203
Steam Cleaning Gun

012804203
407-1-01: RNCC: 3 | RNVC: 9

9 Jun 1988

4940-01-280-3699
Flex Tool Assembly Hose Mask Interface

012803699
136-42-2235: RNCC: 3 | RNVC: 2

8 Jun 1988

4940-01-280-3697
Eyepiece Clamp Assembly

012803697
136-42-2202: RNCC: 3 | RNVC: 2

8 Jun 1988

4940-01-280-3696
Outlet Clamp Assembly

012803696
136-42-2204: RNCC: 3 | RNVC: 2

8 Jun 1988

4940-00-943-7299
Rotary Blade

009437299
5026: RNCC: 3 | RNVC: 9

2 Feb 1966

4940-01-279-9918
Blast Cleaning Cabinet

012799918
SCS06867: RNCC: 3 | RNVC: 9

27 May 1988

4940-01-278-6222
Portable Hydraulic Press

012786222
H20-6: RNCC: 3 | RNVC: 9

7 May 1988

4940-01-278-2773
Blast Cleaning Cabinet

012782773
CS-22C: RNCC: 3 | RNVC: 2

3 May 1988

4940-01-278-0863
Paint Spray Gun

012780863
3100: RNCC: 3 | RNVC: 2
AIRLESSC0 3100: RNCC: C | RNVC: 1

30 Apr 1988

4940-01-277-8450
Paint Spray Gun Fluid Nozzle

012778450
43-15-2-4: RNCC: 3 | RNVC: 9

28 Apr 1988

4940-01-277-7665
Finishing-Material Pressure-Feed Tank

012777665
50-6643: RNCC: 3 | RNVC: 9
50-6643-5/8: RNCC: C | RNVC: 1

27 Apr 1988

4940-01-277-7664
Finishing-Material Pressure-Feed Tank

012777664
50-6642: RNCC: 3 | RNVC: 9
50-6642-1/4: RNCC: C | RNVC: 1

27 Apr 1988

4940-01-277-7661
Finishing-Material Pressure-Feed Tank

012777661
50-6532: RNCC: 3 | RNVC: 9

27 Apr 1988

4940-01-277-7662
Finishing-Material Pressure-Feed Tank

012777662
50-6533: RNCC: 3 | RNVC: 9

27 Apr 1988

4940-01-277-7660
Finishing-Material Pressure-Feed Tank

012777660
50-6523: RNCC: 3 | RNVC: 9

27 Apr 1988

4940-01-277-7663
Finishing-Material Pressure-Feed Tank

012777663
50-6531: RNCC: 3 | RNVC: 9

27 Apr 1988

4940-01-277-7659
Blast Cleaning Machine

012777659
MODEL VR-2A: RNCC: 3 | RNVC: 2
MODEL VR-2A: RNCC: 3 | RNVC: 9
M0DEL VR-2A: RNCC: C | RNVC: 1

27 Apr 1988

4940-01-277-7606
Paint Spray Gun Air Nozzle

012777606
50-6543: RNCC: 3 | RNVC: 9

27 Apr 1988

4940-01-277-7605
Paint Spray Gun Air Nozzle

012777605
50-6542: RNCC: 3 | RNVC: 9

27 Apr 1988

4940-01-277-7604
Paint Spray Gun Air Nozzle

012777604
50-6541: RNCC: 3 | RNVC: 9

27 Apr 1988

4940-01-276-3504
Tool Hose Collet Half

012763504
34444: RNCC: 3 | RNVC: 2
5P0269: RNCC: 5 | RNVC: 2
5P269: RNCC: 5 | RNVC: 9

7 Apr 1988

4940-01-275-6384
Test Adapter

012756384
G338877-22: RNCC: 3 | RNVC: 2
G338877-22: RNCC: 5 | RNVC: 9

24 Mar 1988

4940-01-275-6205
Rear Abutment

012756205
34660: RNCC: 3 | RNVC: 2
5P284: RNCC: 5 | RNVC: 2

23 Mar 1988

4940-01-275-5794
Test Adapter

012755794
G338877-28: RNCC: 3 | RNVC: 2
G338877-28: RNCC: 5 | RNVC: 9

23 Mar 1988

4940-01-275-2468
Tool Sleeve Collet Half

012752468
34519: RNCC: 3 | RNVC: 2
5P0282: RNCC: 5 | RNVC: 2
5P282: RNCC: 5 | RNVC: 9

19 Mar 1988

4940-01-274-9519
Air Blow Gun

012749519
10105: RNCC: 3 | RNVC: 2

16 Mar 1988

4940-01-274-9518
Blast Cleaning Machine

012749518
MOD 6036P-DC100: RNCC: 3 | RNVC: 2
MOD 6036P-DC100: RNCC: 5 | RNVC: 9

16 Mar 1988

4940-01-274-9517
Blast Cleaning Cabinet

012749517
MOD 3Z850: RNCC: 3 | RNVC: 2

16 Mar 1988

4940-01-274-9333
Nozzle Holder

012749333
F109-061: RNCC: 3 | RNVC: 2
C668: RNCC: 3 | RNVC: 9
P801: RNCC: 5 | RNVC: 9

16 Mar 1988

4940-01-274-4907
Pressure Jet Steam Cleaner

012744907
1000 C HOT: RNCC: 3 | RNVC: 9
500: RNCC: 5 | RNVC: 9

9 Mar 1988

4940-01-274-4905
Blast Cleaning Cabinet

012744905
MOD DH48-BULLETIN NO 14A: RNCC: 3 | RNVC: 9
M0D DH48-BULLET: RNCC: C | RNVC: 1

9 Mar 1988

4940-01-274-4906
Degreaser

012744906
1209SH: RNCC: 3 | RNVC: 2
1209SH-1232: RNCC: 5 | RNVC: 9

9 Mar 1988

4940-01-274-4806
Wrench Ejector

012744806
640-1555-001: RNCC: 3 | RNVC: 2
640-1555-001: RNCC: C | RNVC: 1
640-1555: RNCC: D | RNVC: 9

9 Mar 1988

4940-01-274-4587
Acetylene Tester

012744587
C3-019-99-0003: RNCC: 3 | RNVC: 9
C3-019-99-003: RNCC: 5 | RNVC: 2
C3-019-99-0003: RNCC: 5 | RNVC: 9
3-019-99-0003: RNCC: C | RNVC: 1

9 Mar 1988

4940-01-274-1932
Degreaser

012741932
1812SH: RNCC: 3 | RNVC: 2

5 Mar 1988

4940-01-274-0467
Blast Cleaning Cabinet

012740467
MOD SBS3636 600CFM: RNCC: 3 | RNVC: 9
SBS06870: RNCC: 5 | RNVC: 9
SER NO C-30162: RNCC: 5 | RNVC: 9
M0D SBS3636 600: RNCC: C | RNVC: 1

4 Mar 1988

4940-01-274-0466
Electrical Equipment Shop Equipment

012740466
SCS06871: RNCC: 3 | RNVC: 9
MOD SCS3636-600CFM: RNCC: 5 | RNVC: 9
M0D SCS3636-600: RNCC: C | RNVC: 1

4 Mar 1988

4940-00-928-4698
Refrigerant Gas Leak Detector

009284698
540: RNCC: 3 | RNVC: 9
AA59110: RNCC: 4 | RNVC: 1
MIL-L-83774: RNCC: 5 | RNVC: 9

24 Aug 1966

4940-01-273-7129
Air Blow Gun

012737129
203G008-001A: RNCC: 3 | RNVC: 2
203G006-001: RNCC: 5 | RNVC: 9

1 Mar 1988

4940-01-273-1187
Degreaser

012731187
4272225-1000: RNCC: 3 | RNVC: 2

20 Feb 1988

4940-01-273-1104
Bench Safety Parts Cleaning Can

012731104
LKD6074J1-J: RNCC: 3 | RNVC: 2

19 Feb 1988

4940-01-271-9841
Paint Spray Gun

012719841
7601: RNCC: 3 | RNVC: 9
7840T1: RNCC: 5 | RNVC: 2

2 Feb 1988

4940-01-271-3785
Shop Maintenance Tray

012713785
2CR796: RNCC: 3 | RNVC: 2
2CR796: RNCC: 5 | RNVC: 9
A-1914ITEM6: RNCC: D | RNVC: 9

23 Jan 1988

4940-01-270-7965
Cable Breakout Adapter

012707965
T83L-50-EEC-IV: RNCC: 3 | RNVC: 2

13 Jan 1988

4940-01-270-5874
Transporter Workstand Bar Support Assembly

012705874
A02G5037-32: RNCC: 3 | RNVC: 2
A02G5037-3: RNCC: 5 | RNVC: 9
A02G5037-32: RNCC: 5 | RNVC: 9
A02G5037: RNCC: D | RNVC: 9

9 Jan 1988

4940-01-270-5724
Portable Hydraulic Press

012705724
20-1350-115: RNCC: 3 | RNVC: 2

9 Jan 1988

4940-01-269-6628
Steam Cleaner Unloader

012696628
JP7117: RNCC: 3 | RNVC: 2

18 Dec 1987

4940-01-269-4885
Hydraulic System Components Test Stand

012694885
T-46734-1: RNCC: 3 | RNVC: 2

17 Dec 1987

4940-01-268-3025
Printer Panel

012683025
6145349: RNCC: 3 | RNVC: 2

27 Nov 1987

4940-01-268-0257
Guide Gland

012680257
0275.008: RNCC: 3 | RNVC: 2
0275.008: RNCC: 5 | RNVC: 2

21 Nov 1987

4940-01-268-0258
Relief Strainer

012680258
40244: RNCC: 3 | RNVC: 2

21 Nov 1987

4940-01-268-0256
Cleaner Skirt Assembly

012680256
856-245: RNCC: 3 | RNVC: 2

21 Nov 1987

4940-01-267-9985
Spray Gun Tip

012679985
54-3280: RNCC: 3 | RNVC: 2

21 Nov 1987

4940-01-267-2563
Air Blow Gun

012672563
509821: RNCC: 3 | RNVC: 2

7 Nov 1987

4940-01-267-0641
Blast Cleaning Cabinet

012670641
3648SRB-4: RNCC: 3 | RNVC: 2
3680-5212-1433: RNCC: 6 | RNVC: 9

4 Nov 1987

4940-01-266-8216
Electric Fluid Mixer And Tank

012668216
CS-4940-0007: RNCC: 3 | RNVC: 2
G204456: RNCC: 5 | RNVC: 2
0275.000: RNCC: 5 | RNVC: 2
0275.000-15: RNCC: 5 | RNVC: 2

30 Oct 1987

4940-00-913-8434
Electromagnetic Shielding Enclosure

009138434
318D390: RNCC: 3 | RNVC: 2
WN2X2SP: RNCC: 5 | RNVC: 9

29 Jun 1966

4940-01-266-5650
Outer Column

012665650
10370: RNCC: 3 | RNVC: 2
20392: RNCC: 5 | RNVC: 2

27 Oct 1987

4940-01-266-5652
Gear Segment

012665652
11400: RNCC: 3 | RNVC: 2

27 Oct 1987

4940-01-266-5653
Cleaning Machine Geneva Assembly

012665653
11428: RNCC: 3 | RNVC: 2

27 Oct 1987

4940-01-266-5651
Watch Cleaner Column Assembly

012665651
11452: RNCC: 3 | RNVC: 2

27 Oct 1987

4940-01-266-5171
Wheel-Axle

012665171
B84-1074-2: RNCC: 3 | RNVC: 2

27 Oct 1987

4940-01-266-0711
Tool Reseating

012660711
612 103 00: RNCC: 3 | RNVC: 2

20 Oct 1987

4940-01-265-1102
Air Blow Gun

012651102
5650K11: RNCC: 3 | RNVC: 2

9 Oct 1987

4940-01-264-5650
Socket Bracket Assembly

012645650
11395: RNCC: 3 | RNVC: 2

2 Oct 1987

4940-01-264-5649
Shaft Assembly

012645649
11381: RNCC: 3 | RNVC: 2

2 Oct 1987

4940-01-264-5653
Positioning Table Assembly

012645653
11413: RNCC: 3 | RNVC: 2

2 Oct 1987

4940-01-264-5654
Machine Wrapper

012645654
11424: RNCC: 3 | RNVC: 2

2 Oct 1987

4940-01-264-5651
Spiral Wrap

012645651
40186: RNCC: 3 | RNVC: 2

2 Oct 1987

4940-01-264-5646
Index Arm

012645646
11393: RNCC: 3 | RNVC: 2

2 Oct 1987

4940-01-264-5648
Outer Column Top Plug

012645648
40255: RNCC: 3 | RNVC: 2

2 Oct 1987

4940-01-264-5645
Hub Jar Cover

012645645
11414: RNCC: 3 | RNVC: 2

2 Oct 1987

4940-01-264-5642
Foot-Base

012645642
40236: RNCC: 3 | RNVC: 2

2 Oct 1987

4940-01-264-5643
Geneva Arm Assembly

012645643
11451: RNCC: 3 | RNVC: 2

2 Oct 1987

4940-01-264-5641
Dryer Assembly

012645641
11388: RNCC: 3 | RNVC: 2

2 Oct 1987

4940-01-264-5639
Locking Disk

012645639
11390: RNCC: 3 | RNVC: 2

2 Oct 1987

4940-01-264-5640
Drive Disc Assembly

012645640
11455: RNCC: 3 | RNVC: 2

2 Oct 1987

4940-01-264-5638
Coupling

012645638
40245: RNCC: 3 | RNVC: 2

2 Oct 1987

4940-01-264-5636
Inner Column

012645636
10399: RNCC: 3 | RNVC: 2
20379: RNCC: 5 | RNVC: 9

2 Oct 1987

4940-01-264-5635
Cleaning Machine Base Plate

012645635
11364: RNCC: 3 | RNVC: 2

2 Oct 1987

4940-01-264-5637
Outer Column Assembly

012645637
11450: RNCC: 3 | RNVC: 2

2 Oct 1987

4940-01-264-5634
Bottom Star Baffle

012645634
10039: RNCC: 3 | RNVC: 2
11419: RNCC: 5 | RNVC: 9

2 Oct 1987

4940-01-264-5633
Auxiliary Heater Assembly

012645633
11439: RNCC: 3 | RNVC: 2

2 Oct 1987

4940-01-264-5630
Stabilizer Holder

012645630
11752905: RNCC: 3 | RNVC: 9
11752905: RNCC: 5 | RNVC: 9

2 Oct 1987

4940-01-262-3395
Air Blow Gun

012623395
153-001: RNCC: 3 | RNVC: 9
110-040-01: RNCC: 5 | RNVC: 2

27 Aug 1987

4940-01-262-3394
Blast Cleaning Cabinet

012623394
E36: RNCC: 3 | RNVC: 9

27 Aug 1987

4940-01-262-0750
Fuel Heating Torch

012620750
26-9001-00-00-00: RNCC: 3 | RNVC: 2

22 Aug 1987

4940-01-261-5135
Tank Assembly

012615135
820-041: RNCC: 3 | RNVC: 2

14 Aug 1987

4940-01-261-5064
Blasting Machine Gun

012615064
10558: RNCC: 3 | RNVC: 2
50486: RNCC: 3 | RNVC: 2

14 Aug 1987

4940-01-260-9219
Pump Module

012609219
820-043: RNCC: 3 | RNVC: 2

7 Aug 1987

4940-01-260-8398
Blast Cleaning Machine

012608398
31010SS-D-ST-ETC: RNCC: 3 | RNVC: 2
3680-5946-2100: RNCC: 6 | RNVC: 9

5 Aug 1987

4940-01-260-8257
Air Blow Gun

012608257
0277.014: RNCC: 3 | RNVC: 2
0277.014: RNCC: 5 | RNVC: 2

5 Aug 1987

4940-01-260-0627
Dust Bag Frame

012600627
178050: RNCC: 3 | RNVC: 2

25 Jul 1987

4940-01-259-8949
Degreaser

012598949
SYS-1219-A1: RNCC: 3 | RNVC: 2
WR1912: RNCC: 5 | RNVC: 9
WR-1912-C: RNCC: 5 | RNVC: 9

22 Jul 1987

4940-01-259-8177
Spraying Booth

012598177
JGS-478 KIT: RNCC: 3 | RNVC: 2
BB-4: RNCC: 5 | RNVC: 9
DF-6217-M: RNCC: 5 | RNVC: 9

22 Jul 1987

4940-01-258-9291
Barrel

012589291
179-773: RNCC: 3 | RNVC: 2
24C501: RNCC: 5 | RNVC: 2

10 Jul 1987

4940-01-258-3159
Pneumatic Cleaning Gun

012583159
132858: RNCC: 3 | RNVC: 2

1 Jul 1987

4940-01-258-1169
Blast Cleaning Cabinet

012581169
1-00-48365: RNCC: 3 | RNVC: 2
132782: RNCC: 5 | RNVC: 9

27 Jun 1987

4940-01-258-0018
Holding Fixture

012580018
13012652: RNCC: 3 | RNVC: 2
13012652: RNCC: 5 | RNVC: 1

26 Jun 1987

4940-01-257-1416
Anchor Assembly

012571416
5759282: RNCC: 3 | RNVC: 2
5759282: RNCC: 5 | RNVC: 2

12 Jun 1987

4940-01-257-0644
Front Axle Assembly

012570644
FR00135: RNCC: 3 | RNVC: 2
1A2: RNCC: 5 | RNVC: 9

11 Jun 1987

4940-01-255-6330
Shop Maintenance Tray

012556330
5978596: RNCC: 3 | RNVC: 2

23 May 1987

4940-01-255-6216
Electrode Holder Stabilizer

012556216
1175-29-05: RNCC: 3 | RNVC: 2

22 May 1987

4940-01-255-1298
Mixer Manifold Repair Kit

012551298
215-913: RNCC: 3 | RNVC: 2

15 May 1987

4940-01-254-9977
Shop Maintenance Tray

012549977
5978599: RNCC: 3 | RNVC: 2

14 May 1987

4940-01-254-9975
Shop Maintenance Tray

012549975
5978597: RNCC: 3 | RNVC: 2

14 May 1987

4940-01-254-9976
Shop Maintenance Tray

012549976
5978598: RNCC: 3 | RNVC: 2

14 May 1987

4940-01-253-9291
Electromagnetic Shielding Enclosure

012539291
1232D570-1: RNCC: 3 | RNVC: 9
1232D570-1: RNCC: C | RNVC: 1
1223D570-1: RNCC: C | RNVC: 1

28 Apr 1987

4940-01-253-7378
Control Panel Assembly

012537378
51206: RNCC: 3 | RNVC: 2
431870-001: RNCC: 5 | RNVC: 2

24 Apr 1987

4940-01-253-3564
Roller Guide

012533564
PW123: RNCC: 3 | RNVC: 9

17 Apr 1987

4940-01-251-9404
Shop Maintenance Tray

012519404
787AS476: RNCC: 3 | RNVC: 2

26 Mar 1987

4940-01-246-1544
Sound Stethoscope

012461544
ELS-12: RNCC: 3 | RNVC: 2

10 Dec 1986

4940-01-244-4277
Transportable Electronic Shop

012444277
A3066470: RNCC: 3 | RNVC: 2
AN/ASM-147C: RNCC: 5 | RNVC: 2

13 Nov 1986

4940-01-242-9800
Mechanical Equipment Test Fixture

012429800
5758473: RNCC: 3 | RNVC: 2

20 Oct 1986

4940-01-242-9799
Mechanical Equipment Test Fixture

012429799
5758472: RNCC: 3 | RNVC: 2
0698-6713: RNCC: C | RNVC: 1

20 Oct 1986

4940-01-242-7258
Maintenance Platform Section

012427258
6-1-9949: RNCC: 3 | RNVC: 2
6-1-9836-29: RNCC: 5 | RNVC: 2

17 Oct 1986

4940-01-242-3545
Erase Head

012423545
PR-B1EF7/9130: RNCC: 3 | RNVC: 9

10 Oct 1986

4940-01-241-9081
Maintenance Platform

012419081
L-4013-00: RNCC: 3 | RNVC: 2

3 Oct 1986

4940-01-239-5318
Electrical Wire Storage And Dispensing Rack

012395318
SWR1: RNCC: 3 | RNVC: 2
SWA36: RNCC: 5 | RNVC: 9
SWA1: RNCC: 5 | RNVC: 9
SWA1: RNCC: 5 | RNVC: 9

30 Aug 1986

4940-01-239-2744
Hose Reel Assembly

012392744
4016-17-18: RNCC: 3 | RNVC: 9
40168: RNCC: 5 | RNVC: 2
SA1-1708-7.5: RNCC: C | RNVC: 1

27 Aug 1986

4940-01-238-5695
Temper Coil Winding

012385695
05-316-791-821: RNCC: 3 | RNVC: 9

16 Aug 1986

4940-01-237-0294
Dipping-Draining Basket

012370294
11-406: RNCC: 3 | RNVC: 2
11-406: RNCC: 5 | RNVC: 2

24 Jul 1986

4940-01-236-2744
Spray Gun Parts Kit

012362744
104-129: RNCC: 3 | RNVC: 2

15 Jul 1986

4940-01-234-3668
Maintenance Platform

012343668
122-52582-15: RNCC: 3 | RNVC: 9
122-52504-15: RNCC: 5 | RNVC: 9
SP-P5SH30X-30DTS-PDT-30: RNCC: 5 | RNVC: 9

13 Jun 1986

4940-01-233-5108
Centrifugal Blower

012335108
ZMS-8800EL-A: RNCC: 3 | RNVC: 2
ZMS8800EL-A: RNCC: 5 | RNVC: 2

31 May 1986

4940-01-232-8189
Hydraulic Test Stand Screw And Cylinder

012328189
201790-3: RNCC: 3 | RNVC: 2
108460-2: RNCC: 5 | RNVC: 9
201790-3: RNCC: 5 | RNVC: 9

21 May 1986

4940-01-231-9013
Scram Test Stand

012319013
1176J02: RNCC: 3 | RNVC: 1

6 May 1986

4940-01-231-6763
Blower Assembly

012316763
SM-D-812056: RNCC: 3 | RNVC: 2

2 May 1986

4940-01-231-2909
Level Wind Body

012312909
17242-2: RNCC: 3 | RNVC: 2
17242-2: RNCC: 5 | RNVC: 2
17242: RNCC: D | RNVC: 9

25 Apr 1986

4940-01-231-2908
Spacer Weldment

012312908
17210-1: RNCC: 3 | RNVC: 2
17210-1: RNCC: 5 | RNVC: 2
17210: RNCC: D | RNVC: 9

25 Apr 1986

4940-01-230-7705
Hydraulic System Components Test Stand

012307705
708-126: RNCC: 3 | RNVC: 2
708-126: RNCC: 3 | RNVC: 9
644-1: RNCC: 5 | RNVC: 2
B-M 1200: RNCC: 5 | RNVC: 2
644-1: RNCC: 5 | RNVC: 9
B-M 1200: RNCC: 5 | RNVC: 9
4940-5579-5913: RNCC: 6 | RNVC: 9

17 Apr 1986

4940-01-229-5979
Test Adapter

012295979
407-52698-2: RNCC: 3 | RNVC: 2

2 Apr 1986

4940-01-229-3877
Blast Cleaning Cabinet

012293877
3Z849: RNCC: 3 | RNVC: 2

31 Mar 1986

4940-01-229-3814
Test Adapter

012293814
11988-315-11: RNCC: 3 | RNVC: 2
11988-315-1: RNCC: 5 | RNVC: 9

29 Mar 1986

4940-01-229-3810
Test Adapter

012293810
11930-315-1: RNCC: 3 | RNVC: 2

29 Mar 1986

4940-01-229-3812
Test Adapter

012293812
11950-315-11: RNCC: 3 | RNVC: 2
11950-315-1: RNCC: 5 | RNVC: 9

29 Mar 1986

4940-01-229-3811
Test Adapter

012293811
11910-315-1: RNCC: 3 | RNVC: 2

29 Mar 1986

4940-01-229-0910
Electric Gun Type Heater

012290910
74D090257-2021: RNCC: 3 | RNVC: 2

26 Mar 1986

4940-01-228-5453
Coil Winding Machine

012285453
E-125: RNCC: 3 | RNVC: 2
4940-3161-0840: RNCC: 6 | RNVC: 9

18 Mar 1986

4940-01-228-4144
Degreaser

012284144
D-609: RNCC: 3 | RNVC: 2

18 Mar 1986

4940-01-228-3940
Degreaser

012283940
A204599: RNCC: 3 | RNVC: 2
GS6041TS6045HCBC: RNCC: 5 | RNVC: 9

18 Mar 1986

4940-01-227-2347
Generator

012272347
A 468: RNCC: 3 | RNVC: 2

1 Mar 1986

4940-01-227-2338
Cove Molding

012272338
STK-271-3: RNCC: 3 | RNVC: 2

1 Mar 1986

4940-01-225-9177
Test(Tha-A) Adapter

012259177
0N307777-1: RNCC: 3 | RNVC: 2

8 Feb 1986

4940-01-225-9145
Electric Gun Type Heater

012259145
R-3022-00: RNCC: 3 | RNVC: 2
3022 ESCB1419N: RNCC: 5 | RNVC: 9
3022: RNCC: C | RNVC: 1

8 Feb 1986

Load More Results