What is Federal Supply Class 4940?

FSC 4940 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4940) in the USA for supply items codified in the category of Miscellaneous Maintenance and Repair Shop Specialized Equipment.

What is NATO Supply Classification Class 4940?

NSC 4940 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4940 in the USA) for supply items codified in the category of Miscellaneous Maintenance and Repair Shop Specialized Equipment.

Which Federal Supply Group is FSC 4940 in?

FSC 4940 is in Federal Supply Group (FSG) 49 which contains Maintenance and Repair Shop Equipment.

Which NATO Supply Classification Group is NSC 4940 in?

NSC 4940 is in NATO Supply Classification Group (NSG) 49 which contains Maintenance and Repair Shop Equipment.

What is a Demagnetizer?

A Demagnetizer is an item specifically designed to remove magnetism from another item. For items specifically designed to disorientate the magnetic signal induced on tape or wire in preparation for the recording of another signal, see ERASER, MAGNETIC.

What is a Magnet Charger?

A Magnet Charger (CHARGER,MAGNET) is an item specifically designed to restore or establish the field strength of a permanent magnet by energizing it with an electrical current.

What is an Internal Boiler Tube And Flue Cleaner?

An Internal Boiler Tube And Flue Cleaner (TUBE AND FLUE CLEANER,BOILER,INTERNAL) is a hand- or power-operated tool designed to remove inside deposits from boiler tubes by cutting, and/or scraping and with or without brushing. It may also be equipped with a vibrator head to remove scale from the exterior of boiler tubes. Excludes BRUSH, WIRE, BOILER TUBE.

What is a Blast Cleaning Cabinet?

A Blast Cleaning Cabinet is a suitable inclosure equipped with necessary devices through which abrasive materials are ejected either by air pressure or by centrifugal force against surface to be cleaned. It is designed to allow the operator to perform his duties through protected hand holes, viewing the operation through a suitable window.

What is a Propeller Pitch Block?

A Propeller Pitch Block (BLOCK,PITCH,PROPELLER) is a precision machined and shaped metal block, on which marine propellers are checked, to insure accuracy of pitch, boring, blade spacing, and layout. It is also used as a gauge or an anvil on which a damaged propeller can be beaten and restored to its original pitch.

What is a Propeller Balancing Arbor?

A Propeller Balancing Arbor (ARBOR,BALANCING,PROPELLER) is a fixture having two sliding cones for centering the hub bore of a marine propeller used when mounting on balancing ways.

What is a Propeller Mounting Arbor?

A Propeller Mounting Arbor (ARBOR,MOUNTING,PROPELLER) is a fixture, having a cone and nut, designed for mounting marine propellers in position to be gaged and checked on a pitch block.

What is an Air Brake Tester?

An Air Brake Tester (TESTER,AIR BRAKE) is a mechanical device, consisting of a dial gage, a valve, and two couplings which are connected in the brake air line of a single car, for the purpose of checking the condition of the brake equipment.

What is a Maintenance Platform?

A Maintenance Platform is an item of equipment with small floored area(s) supported by scaffolding of metal or wood framework, either portable or stationary. For use in repairing, cleaning, installing, and inspection of property, machinery, and equipment above the general floor level. Excludes MAINTENANCE PLATFORM, AIRCRAFT and MAINTENANCE PLATFORM, GUIDED MISSILE or the like.

What is a Hydraulic Track Pin And Bushing Press?

A Hydraulic Track Pin And Bushing Press (PRESS,TRACK PIN AND BUSHING,HYDRAULIC) is a machine used for removing and replacing crawler type track pins and bushings.

What is a Hydraulic Bushing Press?

A Hydraulic Bushing Press (PRESS,BUSHING,HYDRAULIC) is a machine consisting of base, two uprights and working mechanism including tank, pump, ram, and electric motor all mounted on top of uprights.

What is an Air Blow Gun?

An Air Blow Gun (GUN,AIR BLOW) is a mechanical device designed for attachment to the discharge end of a compressed air line, for blowing dirt or other foreign substance from motors, machinery, and the like.

What is a Pneumatic Cleaning Gun?

A Pneumatic Cleaning Gun (CLEANING GUN,PNEUMATIC) is a cleaning gun with reservoir designed to spray water or solvents. It is used with a COMPRESSOR UNIT (as modified). For items that do not have a reservoir, see: GUN,AIR BLOW

What is a Paint Spray Gun?

A Paint Spray Gun (SPRAY GUN,PAINT) is a mechaincal device for bringing air and a stream of paint or similar material together, atomizing or breaking up the stream into a spray and ejecting it for the purpose of applying a coating to an object or surface at high speed. See also SPRAY OUTFIT, PAINT.

What is a Shaker Type Paint Agitator?

A Shaker Type Paint Agitator (AGITATOR,PAINT,SHAKER TYPE) is a mechanical device consisting of a power-driven can holder or holders which shake or vibrate the contents of the can. It is used for rejuvenating or conditioning paint and the like.

What is a Revolving Head Liquid Mixer?

A Revolving Head Liquid Mixer (MIXER,LIQUID,REVOLVING HEAD) is a mechanical device which consists of a hand-or power-driven head to which mixing paddles are attached, and a removable can, and may have a mechanically driven turntable for revolving the can.

What is a Revolving Shaft Liquid Mixer?

A Revolving Shaft Liquid Mixer (MIXER,LIQUID,REVOLVING SHAFT) is a mechanical device which may be fastened to a tank, vat, drum, and the like, consisting of an electric or pneumatic powered rotating shaft to which one or more stirrers or impellers are affixed. Excludes MIXING MACHINE, FOOD, ELECTRIC and MIXER, FLUID, ELECTRIC.

What is a Trailer Mounted Electronic Shop?

A Trailer Mounted Electronic Shop (ELECTRONIC SHOP,TRAILER MOUNTED) is a trailer permanently fitted with equipment and tools for testing and repairing electrical and electronic equipment. Do not use for shop equipment designed for testing and repairing guided missile maintenance, repair, and checkout specialized equipment. See also SHOP EQUIPMENT (as modified).

What is a Truck Mounted Electronic Shop?

A Truck Mounted Electronic Shop (ELECTRONIC SHOP,TRUCK MOUNTED) is a truck permanently fitted with equipment and tools for testing and repairing electrical and electronic equipment. Do not use for shop equipment designed for testing and repairing guided missile maintenance, repair, and checkout specialized equipment. See also SHOP EQUIPMENT (as modified).

What is a Finishing-Material Pressure-Feed Tank?

A Finishing-Material Pressure-Feed Tank (TANK,PRESSURE-FEED,FINISHING-MATERIAL) is a metal container of sturdy construction used to hold materials such as paint, enamel, lacquer, emulsified asphalt, flock, latex, and ceramic materials, under pressure until released through a remote-operated spray gun by the air-displacement principle. Flow is controlled by valves, regulators, and gages on a lid clamped securely to the container. Excludes cups or other containers secured directly to spray guns.

What is a Hose Expansion Ring Expander?

A Hose Expansion Ring Expander (EXPANDER,HOSE EXPANSION RING) is an item used to expand expansion rings inside hose, such as fire hose, so that external fittings may be secured to the hose.

What is a Test Adapter?

A Test Adapter (ADAPTER,TEST) is an adapter which provides facilities for electrically connecting an item to be tested and a piece of test equipment. Do not use for interconnecting cables. Includes plug-in electronic component socket adapters which provide terminations for dynamic testing while an electronic component is inserted. See also COUPLER, TEST SET.

What is a Rubber Covered Cable Vulcanizer?

A Rubber Covered Cable Vulcanizer (VULCANIZER,RUBBER COVERED CABLE) is a device for bonding patches or splices in rubber covered cable by means of pressure and heat.

What is a Paint Spray Outfit?

A Paint Spray Outfit (SPRAY OUTFIT,PAINT) is an outfit consisting of spray gun(s) with fluid and air hose and one or more accessories such as pressure tank(s), feed cup(s) and the like and with or without an air compressor. It is designed for applying paints and similar fluids in large area covering operations at high speed.

What is a Spray Gun Oil And Water Separator?

A Spray Gun Oil And Water Separator (SEPARATOR,OIL AND WATER,SPRAY GUN) is a device for removing oil, water, dust and other foreign matter from compressed air for paint and metal spraying operations. It also regulates and indicates air pressure by means of valve(s) or gage(s). Excludes SEPARATOR, OIL and SEPARATOR, PIPELINE.

What is an Electrically Operated Armature Mica Undercutter?

An Electrically Operated Armature Mica Undercutter (UNDERCUTTER,ARMATURE MICA,ELECTRICALLY OPERATED) is a machine specifically designed for undercutting armature commutator mica insulation segments. Excludes armature turning and undercutting tools. See also UNDERCUTTER, ARMATURE MICA, HAND.

What is a Nonelectric Wheel Balancer?

A Nonelectric Wheel Balancer (BALANCER,WHEEL,NONELECTRIC) is a portable device designed to speed balancing, straightening and truing operations for propellers, disks and wheels.

What is a Commutator Resurfacer?

A Commutator Resurfacer (RESURFACER,COMMUTATOR) is a portable device designed to true up commutators or slip rings without dismantling. This device mounts directly on the brush rigging or arm by means of bearing or rigid supports. Replaceable abrasive stones are mounted in a holder which travels along entire face of commutator or slip ring.

What is a Fuel Can And Drum Cleaning Machine?

A Fuel Can And Drum Cleaning Machine (CLEANING MACHINE,FUEL CAN AND DRUM) is a complete unit designed to remove sand, mud, loose rust and sediment from the inside of gasoline containers by the spraying action of kerosene or other petroleum solvents.

What is a Condenser Tube Cleaning Plug?

A Condenser Tube Cleaning Plug (PLUG,CONDENSER TUBE CLEANING) is a cylindrical item which is propelled by air or water pressure through the inside of condenser tubes to clean foreign deposits from the inner surface.

A Degreaser is a device designed to remove grease and foreign matter from mechanical parts and like items, usually metallic, by purging action in vaporized or liquid solvent or solvent-free solution confined in a tank or similar vessel. It usally includes a circulating pump, heating mechanism, and may include an auxiliary supply tank and spray equipment, and/or an ultrasonic generator. For ittems consisting essentially of a metal vessel with heating equipment, and adaptable to functions other than degreasing (e.g., wax melting), see TANK, HOT DIP (as modified). See also PARTS CLEANING CAN. SAFETY, BENCH. Excludes CLEANER, ULTRASONIC.

What is a Rubber Covered Cable Vulcanizing Mold?

A Rubber Covered Cable Vulcanizing Mold (VULCANIZING MOLD,RUBBER COVERED CABLE) is a form consisting of two or more matched sections specifically designed for use with vulcanizing equipment for splicing or patching insulated electric wire or cable.

What is a Pressure Jet Steam Cleaner?

A Pressure Jet Steam Cleaner (CLEANER,STEAM,PRESSURE JET) is a unit designed to remove surface deposits of foreign materials by means of a forced stream of steam and detergent or water. Excludes CLEANER, STEAM, PRESSURE JET, TRAILER MOUNTED; DISHWASHING MACHINE, COMMERCIAL; DISHWASHING MACHINE, HOUSEHOLD; and CLEANER, PRESSURE, SOLVENT-WATER.

What is a Blast Cleaning Machine?

A Blast Cleaning Machine is a mechanical device consisting of an abrasive container and necessary valves and attachments which, when connected to a source of air pressure, mixes the abrasive with air to be discharged through a hose and nozzle at high speed against a surface not contained by the machine, to perform the function of surface cleaning. May include abrasive recovery system. It is an entirely self-contained unit.

What is a Hydraulic System Components Test Stand?

A Hydraulic System Components Test Stand (TEST STAND,HYDRAULIC SYSTEM COMPONENTS) is a cabinetlike item usually with a front work area and consisting of the necessary instrumentation, integral hydraulic system and component mounting facilities. Designed to provide the hydraulic pressure for testing and/or calibrating hydraulic system components, such as valves, actuating cylinders, pressure regulators, accumulators, hose lines, hand and/or engine driven pumps and the like. May include facilities for filling and checking hydraulic systems for leakage and performance. See also PUMPING UNIT, HYDRAULIC.

What is a Coil Winding Machine?

A Coil Winding Machine (WINDING MACHINE,COIL) is an item of equipment designed to wind one or more types of coils, such as armature, field or magnetic coils, and may include any of a number of accessories.

What is a Hand Operated Ceiling And Wall Cleaning Machine?

A Hand Operated Ceiling And Wall Cleaning Machine (CLEANING MACHINE,CEILING AND WALL,HAND OPERATED) is a manually operated device consisting of feeder tank(s), pressure gage(s), hand pump(s), hose and liquid applicators. Used for applying cleaning solution and rinse water in washing wall, ceilings, etc.

What is an Electrical Test And Maintenance Table?

An Electrical Test And Maintenance Table (TABLE,ELECTRICAL TEST AND MAINTENANCE) is a table designed for general use in the testing of electrical circuits in the maintenance of instruments and appliances operated by electricity.

What is a Maintenance Company Supplementary Equipment?

A Maintenance Company Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,MAINTENANCE COMPANY) is a group of items consisting of brake band lining, oil and grease, v-belts, inner tube repair kits, nuts and bolts, etc., for use with shop sets. It contains a large variety of expendable items and some special tools.

What is a Refrigerant Gas Leak Detector Parts Kit?

A Refrigerant Gas Leak Detector Parts Kit (PARTS KIT,REFRIGERANT GAS LEAK DETECTOR) is a parts kit used in the repair of refrigerant gas leak detectors.

What is a Portable Hydraulic Press?

A Portable Hydraulic Press (PRESS,HYDRAULIC,PORTABLE) is a group of items consisting of a hydraulic ram and pump unit with attachments which, when assembled, will perform various functions of bending, straightening, forcing and pressing of metal parts. Excludes PRESS, ARBOR, HAND OPERATED.

What is an Air Pressure Pipeline Cleaner?

An Air Pressure Pipeline Cleaner (CLEANER,PIPELINE,AIR PRESSURE) is a hand operated appliance consisting of pump, air pressure tank, air pressure gage, and air release mechanism, designed to remove obstructions in waterlines and drainage systems by the impact of air under pressure against a column of trapped water.

What is a Fluid Pressure Pipeline Cleaning Element?

A Fluid Pressure Pipeline Cleaning Element (CLEANING ELEMENT,PIPELINE,FLUID PRESSURE) is an implement which, when propelled through a pipeline by fluid pressure, is designed to remove obstructions therein by the actions of scraping, buffing, and/or cutting.

What is an Electric Fluid Mixer And Tank?

An Electric Fluid Mixer And Tank (MIXER AND TANK,FLUID,ELECTRIC) is a unit consisting of a MIXER, LIQUID, REVOLVING SHAFT permanently attached to a covered cylindrical tank. It may or may not have a draw-off faucet. It is used to mix or blend various materials in a fluid state. See also MIXER, FLUID ELECTRIC; FOOD BLENDER, ELECTRIC; and MIXING MACHINE, FOOD, ELECTRIC.

What is a Shop Maintenance Tray?

A Shop Maintenance Tray (TRAY,SHOP MAINTENANCE) is a shallow, flat receptacle with a raised edge rim, used for holding, carrying, storing or displaying articles in a shop evironment.

What is a Refrigerant Service Kit?

A Refrigerant Service Kit (SERVICE KIT,REFRIGERANT) is a group of items consisting of adapters, gaskets, shutoff valve(s), hand tools, and the like. It is used in charging, purging and testing the refrigerant in hermetically sealed refrigerating units. See also TOOL KIT (1), REFRIGERATION EQUIPMENT.

What is a Globe-Angle-Cross Valve Reseating Outfit?

A Globe-Angle-Cross Valve Reseating Outfit (RESEATING OUTFIT,GLOBE-ANGLE-CROSS VALVE) is a unit furnished with various size cutters and/or other tools necessary for the reseating or replacement of seats in globe, angle, cross valves, and the like. May be hand operated or power operated.

Miscellaneous Maintenance and Repair Shop Specialized Equipment

Federal Supply Class (FSC): 4940

NATO Supply Classification Class (NSC): 4940

Group Description: Maintenance and Repair Shop Equipment

Federal Supply Group (FSG): 49

NATO Supply Classification Group (NSG): 49

Page 42 of 103

NSN Format for Miscellaneous Maintenance and Repair Shop Specialized Equipment

49	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 4940 Miscellaneous Maintenance and Repair Shop Specialized Equipment

Includes Paint Spraying Equipment.

Excludes Hand Tools (FSG 51).

Note-Specialized equipment which is designed for automotive maintenance and repair, and which is also used for the maintenance and repair of nonautomotive vehicles or equipment, will be classified in Class 4910. Jigs, fixtures, and templates used in conjunction with maintenance and repair shop specialized equipment are classified in this group. However, jigs, fixtures, and templates used in conjunction with metalworking machinery are classified in Group 34. Infrared assemblies, subassemblies, and components specifically designed as test and maintenance specialized equipment are classified in the appropriate classes of this group. Excluded from this group is infrared equipment designed for testing communications and night vision equipment.

Additional Information for Miscellaneous Maintenance and Repair Shop Specialized Equipment

NATO Supply Class 4940 is a classification for Miscellaneous Maintenance And Repair Shop Specialized Equipment. It falls under NATO Supply Group 49, which is dedicated to Maintenance And Repair Shop Equipment.

NATO Supply Class 4940 includes a wide range of specialized equipment used in maintenance and repair shops. This can include tools, machinery, and other equipment specifically designed for various maintenance and repair tasks.

The purpose of this classification is to provide a standardized system for categorizing and organizing equipment used in maintenance and repair shops within NATO member countries. By using this classification system, it becomes easier to identify, procure, and distribute the necessary equipment for these specialized tasks.

Examples of equipment that may fall under NATO Supply Class 4940 include welding machines, hydraulic presses, diagnostic tools, specialized hand tools, and other equipment used for maintenance and repair purposes.

It is important to note that this classification system is specific to NATO member countries and is used primarily for military purposes. However, the classification can also be used as a reference for non-military organizations or individuals involved in maintenance and repair work.

If you need more specific information about a particular item or have any other questions, feel free to ask!

NSN by Country

US
United States
21986 Items

UK
United Kingdom
6537 Items

FR
France
5060 Items

IT
Italy
3739 Items

DE
Germany
3402 Items

CA
Canada
2627 Items

DK
Denmark
1518 Items

AU
Australia
1369 Items

NL
Netherlands
1157 Items

NO
Norway
1108 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 4940

What is Federal Supply Class 4940?: FSC 4940 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 4940) in the USA for supply items codified in the category of Miscellaneous Maintenance and Repair Shop Specialized Equipment.
What is NATO Supply Classification Class 4940?: NSC 4940 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4940 in the USA) for supply items codified in the category of Miscellaneous Maintenance and Repair Shop Specialized Equipment.
Which Federal Supply Group is FSC 4940 in?: FSC 4940 is in Federal Supply Group(FSG) 49 which contains .
Which NATO Supply Classification Group is NSC 4940 in?: NSC 4940 is in NATO Supply Classification Group(NSG) 49 which contains .

Supply Items Included in Federal Supply Class 4940

What is a Demagnetizer? 66 Items: A Demagnetizer is an item specifically designed to remove magnetism from another item. For items specifically designed to disorientate the magnetic signal induced on tape or wire in preparation for the recording of another signal, see ERASER, MAGNETIC.
What is a Magnet Charger? 31 Items: A Magnet Charger (CHARGER,MAGNET) is an item specifically designed to restore or establish the field strength of a permanent magnet by energizing it with an electrical current.
What is an Internal Boiler Tube And Flue Cleaner? 54 Items: An Internal Boiler Tube And Flue Cleaner (TUBE AND FLUE CLEANER,BOILER,INTERNAL) is a hand- or power-operated tool designed to remove inside deposits from boiler tubes by cutting, and/or scraping and with or without brushing. It may also be equipped with a vibrator head to remove scale from the exterior of boiler tubes. Excludes BRUSH, WIRE, BOILER TUBE.
What is a Blast Cleaning Cabinet? 265 Items: A Blast Cleaning Cabinet is a suitable inclosure equipped with necessary devices through which abrasive materials are ejected either by air pressure or by centrifugal force against surface to be cleaned. It is designed to allow the operator to perform his duties through protected hand holes, viewing the operation through a suitable window.
What is a Propeller Pitch Block? 15 Items: A Propeller Pitch Block (BLOCK,PITCH,PROPELLER) is a precision machined and shaped metal block, on which marine propellers are checked, to insure accuracy of pitch, boring, blade spacing, and layout. It is also used as a gauge or an anvil on which a damaged propeller can be beaten and restored to its original pitch.
What is a Propeller Balancing Arbor? 11 Items: A Propeller Balancing Arbor (ARBOR,BALANCING,PROPELLER) is a fixture having two sliding cones for centering the hub bore of a marine propeller used when mounting on balancing ways.
What is a Propeller Mounting Arbor? 13 Items: A Propeller Mounting Arbor (ARBOR,MOUNTING,PROPELLER) is a fixture, having a cone and nut, designed for mounting marine propellers in position to be gaged and checked on a pitch block.
What is an Air Brake Tester? 26 Items: An Air Brake Tester (TESTER,AIR BRAKE) is a mechanical device, consisting of a dial gage, a valve, and two couplings which are connected in the brake air line of a single car, for the purpose of checking the condition of the brake equipment.
What is a Maintenance Platform? 570 Items: A Maintenance Platform is an item of equipment with small floored area(s) supported by scaffolding of metal or wood framework, either portable or stationary. For use in repairing, cleaning, installing, and inspection of property, machinery, and equipment above the general floor level. Excludes MAINTENANCE PLATFORM, AIRCRAFT and MAINTENANCE PLATFORM, GUIDED MISSILE or the like.
What is a Hydraulic Track Pin And Bushing Press? 16 Items: A Hydraulic Track Pin And Bushing Press (PRESS,TRACK PIN AND BUSHING,HYDRAULIC) is a machine used for removing and replacing crawler type track pins and bushings.
What is a Hydraulic Bushing Press? 11 Items: A Hydraulic Bushing Press (PRESS,BUSHING,HYDRAULIC) is a machine consisting of base, two uprights and working mechanism including tank, pump, ram, and electric motor all mounted on top of uprights.
Leak Detector,Refrigerant Gas 297 Items
What is an Air Blow Gun? 428 Items: An Air Blow Gun (GUN,AIR BLOW) is a mechanical device designed for attachment to the discharge end of a compressed air line, for blowing dirt or other foreign substance from motors, machinery, and the like.
What is a Pneumatic Cleaning Gun? 73 Items: A Pneumatic Cleaning Gun (CLEANING GUN,PNEUMATIC) is a cleaning gun with reservoir designed to spray water or solvents. It is used with a COMPRESSOR UNIT (as modified). For items that do not have a reservoir, see: GUN,AIR BLOW
Cleaning Gun,Steam 57 Items
What is a Paint Spray Gun? 466 Items: A Paint Spray Gun (SPRAY GUN,PAINT) is a mechaincal device for bringing air and a stream of paint or similar material together, atomizing or breaking up the stream into a spray and ejecting it for the purpose of applying a coating to an object or surface at high speed. See also SPRAY OUTFIT, PAINT.
What is a Shaker Type Paint Agitator? 61 Items: A Shaker Type Paint Agitator (AGITATOR,PAINT,SHAKER TYPE) is a mechanical device consisting of a power-driven can holder or holders which shake or vibrate the contents of the can. It is used for rejuvenating or conditioning paint and the like.
What is a Revolving Head Liquid Mixer? 19 Items: A Revolving Head Liquid Mixer (MIXER,LIQUID,REVOLVING HEAD) is a mechanical device which consists of a hand-or power-driven head to which mixing paddles are attached, and a removable can, and may have a mechanically driven turntable for revolving the can.
What is a Revolving Shaft Liquid Mixer? 93 Items: A Revolving Shaft Liquid Mixer (MIXER,LIQUID,REVOLVING SHAFT) is a mechanical device which may be fastened to a tank, vat, drum, and the like, consisting of an electric or pneumatic powered rotating shaft to which one or more stirrers or impellers are affixed. Excludes MIXING MACHINE, FOOD, ELECTRIC and MIXER, FLUID, ELECTRIC.
Electronic Shop,Semitrailer Mounted 28 Items
What is a Trailer Mounted Electronic Shop? 15 Items: A Trailer Mounted Electronic Shop (ELECTRONIC SHOP,TRAILER MOUNTED) is a trailer permanently fitted with equipment and tools for testing and repairing electrical and electronic equipment. Do not use for shop equipment designed for testing and repairing guided missile maintenance, repair, and checkout specialized equipment. See also SHOP EQUIPMENT (as modified).
What is a Truck Mounted Electronic Shop? 53 Items: A Truck Mounted Electronic Shop (ELECTRONIC SHOP,TRUCK MOUNTED) is a truck permanently fitted with equipment and tools for testing and repairing electrical and electronic equipment. Do not use for shop equipment designed for testing and repairing guided missile maintenance, repair, and checkout specialized equipment. See also SHOP EQUIPMENT (as modified).
Instrument Repair Shop,Truck Mounted 22 Items
What is a Finishing-Material Pressure-Feed Tank? 75 Items: A Finishing-Material Pressure-Feed Tank (TANK,PRESSURE-FEED,FINISHING-MATERIAL) is a metal container of sturdy construction used to hold materials such as paint, enamel, lacquer, emulsified asphalt, flock, latex, and ceramic materials, under pressure until released through a remote-operated spray gun by the air-displacement principle. Flow is controlled by valves, regulators, and gages on a lid clamped securely to the container. Excludes cups or other containers secured directly to spray guns.
What is a Hose Expansion Ring Expander? 35 Items: A Hose Expansion Ring Expander (EXPANDER,HOSE EXPANSION RING) is an item used to expand expansion rings inside hose, such as fire hose, so that external fittings may be secured to the hose.
What is a Test Adapter? 683 Items: A Test Adapter (ADAPTER,TEST) is an adapter which provides facilities for electrically connecting an item to be tested and a piece of test equipment. Do not use for interconnecting cables. Includes plug-in electronic component socket adapters which provide terminations for dynamic testing while an electronic component is inserted. See also COUPLER, TEST SET.
What is a Rubber Covered Cable Vulcanizer? 13 Items: A Rubber Covered Cable Vulcanizer (VULCANIZER,RUBBER COVERED CABLE) is a device for bonding patches or splices in rubber covered cable by means of pressure and heat.
What is a Paint Spray Outfit? 251 Items: A Paint Spray Outfit (SPRAY OUTFIT,PAINT) is an outfit consisting of spray gun(s) with fluid and air hose and one or more accessories such as pressure tank(s), feed cup(s) and the like and with or without an air compressor. It is designed for applying paints and similar fluids in large area covering operations at high speed.
Cup,Paint,Spray Gun 162 Items
What is a Spray Gun Oil And Water Separator? 56 Items: A Spray Gun Oil And Water Separator (SEPARATOR,OIL AND WATER,SPRAY GUN) is a device for removing oil, water, dust and other foreign matter from compressed air for paint and metal spraying operations. It also regulates and indicates air pressure by means of valve(s) or gage(s). Excludes SEPARATOR, OIL and SEPARATOR, PIPELINE.
Case,Test Set 155 Items
What is an Electrically Operated Armature Mica Undercutter? 22 Items: An Electrically Operated Armature Mica Undercutter (UNDERCUTTER,ARMATURE MICA,ELECTRICALLY OPERATED) is a machine specifically designed for undercutting armature commutator mica insulation segments. Excludes armature turning and undercutting tools. See also UNDERCUTTER, ARMATURE MICA, HAND.
What is a Nonelectric Wheel Balancer? 28 Items: A Nonelectric Wheel Balancer (BALANCER,WHEEL,NONELECTRIC) is a portable device designed to speed balancing, straightening and truing operations for propellers, disks and wheels.
What is a Commutator Resurfacer? 16 Items: A Commutator Resurfacer (RESURFACER,COMMUTATOR) is a portable device designed to true up commutators or slip rings without dismantling. This device mounts directly on the brush rigging or arm by means of bearing or rigid supports. Replaceable abrasive stones are mounted in a holder which travels along entire face of commutator or slip ring.
What is a Fuel Can And Drum Cleaning Machine? 12 Items: A Fuel Can And Drum Cleaning Machine (CLEANING MACHINE,FUEL CAN AND DRUM) is a complete unit designed to remove sand, mud, loose rust and sediment from the inside of gasoline containers by the spraying action of kerosene or other petroleum solvents.
Cutter,Milling,Commutator Mica 49 Items
What is a Condenser Tube Cleaning Plug? 25 Items: A Condenser Tube Cleaning Plug (PLUG,CONDENSER TUBE CLEANING) is a cylindrical item which is propelled by air or water pressure through the inside of condenser tubes to clean foreign deposits from the inner surface.
What is a Degreaser? 635 Items: A Degreaser is a device designed to remove grease and foreign matter from mechanical parts and like items, usually metallic, by purging action in vaporized or liquid solvent or solvent-free solution confined in a tank or similar vessel. It usally includes a circulating pump, heating mechanism, and may include an auxiliary supply tank and spray equipment, and/or an ultrasonic generator. For ittems consisting essentially of a metal vessel with heating equipment, and adaptable to functions other than degreasing (e.g., wax melting), see TANK, HOT DIP (as modified). See also PARTS CLEANING CAN. SAFETY, BENCH. Excludes CLEANER, ULTRASONIC.
What is a Rubber Covered Cable Vulcanizing Mold? 24 Items: A Rubber Covered Cable Vulcanizing Mold (VULCANIZING MOLD,RUBBER COVERED CABLE) is a form consisting of two or more matched sections specifically designed for use with vulcanizing equipment for splicing or patching insulated electric wire or cable.
What is a Pressure Jet Steam Cleaner? 365 Items: A Pressure Jet Steam Cleaner (CLEANER,STEAM,PRESSURE JET) is a unit designed to remove surface deposits of foreign materials by means of a forced stream of steam and detergent or water. Excludes CLEANER, STEAM, PRESSURE JET, TRAILER MOUNTED; DISHWASHING MACHINE, COMMERCIAL; DISHWASHING MACHINE, HOUSEHOLD; and CLEANER, PRESSURE, SOLVENT-WATER.
What is a Blast Cleaning Machine? 326 Items: A Blast Cleaning Machine is a mechanical device consisting of an abrasive container and necessary valves and attachments which, when connected to a source of air pressure, mixes the abrasive with air to be discharged through a hose and nozzle at high speed against a surface not contained by the machine, to perform the function of surface cleaning. May include abrasive recovery system. It is an entirely self-contained unit.
What is a Hydraulic System Components Test Stand? 123 Items: A Hydraulic System Components Test Stand (TEST STAND,HYDRAULIC SYSTEM COMPONENTS) is a cabinetlike item usually with a front work area and consisting of the necessary instrumentation, integral hydraulic system and component mounting facilities. Designed to provide the hydraulic pressure for testing and/or calibrating hydraulic system components, such as valves, actuating cylinders, pressure regulators, accumulators, hose lines, hand and/or engine driven pumps and the like. May include facilities for filling and checking hydraulic systems for leakage and performance. See also PUMPING UNIT, HYDRAULIC.
What is a Coil Winding Machine? 55 Items: A Coil Winding Machine (WINDING MACHINE,COIL) is an item of equipment designed to wind one or more types of coils, such as armature, field or magnetic coils, and may include any of a number of accessories.
Stand,Maintenance,Armature 16 Items
What is a Hand Operated Ceiling And Wall Cleaning Machine? 14 Items: A Hand Operated Ceiling And Wall Cleaning Machine (CLEANING MACHINE,CEILING AND WALL,HAND OPERATED) is a manually operated device consisting of feeder tank(s), pressure gage(s), hand pump(s), hose and liquid applicators. Used for applying cleaning solution and rinse water in washing wall, ceilings, etc.
What is an Electrical Test And Maintenance Table? 61 Items: An Electrical Test And Maintenance Table (TABLE,ELECTRICAL TEST AND MAINTENANCE) is a table designed for general use in the testing of electrical circuits in the maintenance of instruments and appliances operated by electricity.
What is a Maintenance Company Supplementary Equipment? 12 Items: A Maintenance Company Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,MAINTENANCE COMPANY) is a group of items consisting of brake band lining, oil and grease, v-belts, inner tube repair kits, nuts and bolts, etc., for use with shop sets. It contains a large variety of expendable items and some special tools.
Tool Set,Railway Bridge And Building Maintenance Crew 23 Items
What is a Refrigerant Gas Leak Detector Parts Kit? 27 Items: A Refrigerant Gas Leak Detector Parts Kit (PARTS KIT,REFRIGERANT GAS LEAK DETECTOR) is a parts kit used in the repair of refrigerant gas leak detectors.
What is a Portable Hydraulic Press? 94 Items: A Portable Hydraulic Press (PRESS,HYDRAULIC,PORTABLE) is a group of items consisting of a hydraulic ram and pump unit with attachments which, when assembled, will perform various functions of bending, straightening, forcing and pressing of metal parts. Excludes PRESS, ARBOR, HAND OPERATED.
What is an Air Pressure Pipeline Cleaner? 13 Items: An Air Pressure Pipeline Cleaner (CLEANER,PIPELINE,AIR PRESSURE) is a hand operated appliance consisting of pump, air pressure tank, air pressure gage, and air release mechanism, designed to remove obstructions in waterlines and drainage systems by the impact of air under pressure against a column of trapped water.
What is a Fluid Pressure Pipeline Cleaning Element? 109 Items: A Fluid Pressure Pipeline Cleaning Element (CLEANING ELEMENT,PIPELINE,FLUID PRESSURE) is an implement which, when propelled through a pipeline by fluid pressure, is designed to remove obstructions therein by the actions of scraping, buffing, and/or cutting.
What is an Electric Fluid Mixer And Tank? 23 Items: An Electric Fluid Mixer And Tank (MIXER AND TANK,FLUID,ELECTRIC) is a unit consisting of a MIXER, LIQUID, REVOLVING SHAFT permanently attached to a covered cylindrical tank. It may or may not have a draw-off faucet. It is used to mix or blend various materials in a fluid state. See also MIXER, FLUID ELECTRIC; FOOD BLENDER, ELECTRIC; and MIXING MACHINE, FOOD, ELECTRIC.
What is a Shop Maintenance Tray? 411 Items: A Shop Maintenance Tray (TRAY,SHOP MAINTENANCE) is a shallow, flat receptacle with a raised edge rim, used for holding, carrying, storing or displaying articles in a shop evironment.
What is a Refrigerant Service Kit? 29 Items: A Refrigerant Service Kit (SERVICE KIT,REFRIGERANT) is a group of items consisting of adapters, gaskets, shutoff valve(s), hand tools, and the like. It is used in charging, purging and testing the refrigerant in hermetically sealed refrigerating units. See also TOOL KIT (1), REFRIGERATION EQUIPMENT.
What is a Globe-Angle-Cross Valve Reseating Outfit? 24 Items: A Globe-Angle-Cross Valve Reseating Outfit (RESEATING OUTFIT,GLOBE-ANGLE-CROSS VALVE) is a unit furnished with various size cutters and/or other tools necessary for the reseating or replacement of seats in globe, angle, cross valves, and the like. May be hand operated or power operated.
What is a Gate Valve Reseating Outfit? 19 Items: A Gate Valve Reseating Outfit (RESEATING OUTFIT,GATE VALVE) is a unit furnished with cutters, cutter support, and a disk refacing machine, to reseat seats and disks in gate valves and the like.
What is a Spraying Booth? 204 Items: A Spraying Booth (BOOTH,SPRAYING) is an assembled unit, usually constructed of sheet metal, specifically designed to confine and/or direct fumes, dust and overspray of paint, lacquer, corrosion preventative or like material to a suitable outlet or container. It may or may not be equipped with exhaust fan(s), circulating water pump(s) or both. It may also be incorporated with a tank as an integral or separate unit for storage of the water so circulated.
What is a Trailer Mounted Pressure Jet Steam Cleaner? 55 Items: A Trailer Mounted Pressure Jet Steam Cleaner (CLEANER,STEAM,PRESSURE JET,TRAILER MOUNTED) is a unit designed to remove surface deposits of foreign materials by means of a forced stream of steam and detergent or water. Excludes CLEANER, STEAM, PRESSURE JET; DISHWASHING MACHINE, COMMERCIAL; DISHWASHING MACHINE, HOUSEHOLD; and CLEANER, PRESSURE, SOLVENT-WATER
What is a Trailer Mounted Cleaning Compound Spraying Unit? 30 Items: A Trailer Mounted Cleaning Compound Spraying Unit (SPRAYING UNIT,CLEANING COMPOUND,TRAILER MOUNTED) is a self-contained power operated mobile item designed to spray a solvent cleaning compound on surfaces to remove deposits of foreign materials. See also SPRAYING UNIT, CLEANING COMPOUND, SKID MOUNTED.
What is a Bench Safety Parts Cleaning Can? 21 Items: A Bench Safety Parts Cleaning Can (PARTS CLEANING CAN,SAFETY,BENCH) is a portable, cylindrical metal item, with a hinged cover. It contains a perforated metal dasher (fire baffle) mounted on a vertical coil spring. It is used for cleaning small parts with flammable or other solvent liquids. The cover may have a metal stand attached to the top so that the cover, when fully opened, may be used for holding parts during the drying process. See also DEGREASER and SAFETY CAN.
What is a Water Cleaning Gun? 134 Items: A Water Cleaning Gun (CLEANING GUN,WATER) is a pressure nozzle designed to operate by water pressure to deliver a hard driving stream of water. It is primarily used for removing caked mud, ice, grease, and the like from the chassis and under the fenders of cars and trucks. See also NOZZLE (as modified).
What is a Flammable Liquid Plunger Can? 13 Items: A Flammable Liquid Plunger Can (CAN,PLUNGER,FLAMMABLE LIQUID) is a cylindrical metal container designed to dispense hazardous liquids through a center mounted plunger. It is used primarily for moistening cleaning rags, sponges, swabs and the like. In operation, a sponge or swab may be saturated by placing it over a screened circular tray which is mounted on the top of the plunger and exerting a downward pressure, forcing the liquid upward. The plunger automatically returns to an extended position by means of a compression spring, when pressure is released. See also CAN, BENCH, FLAMMABLE LIQUID. For items intended for temporary storage or handling of flammable liquids, see SAFETY CAN.
What is an Electromagnetic Shielding Enclosure? 227 Items: An Electromagnetic Shielding Enclosure (ENCLOSURE,ELECTROMAGNETIC SHIELDING) is a prefabricated and/or demountable structure designed to encompass electrical apparatus and personnel for the purpose of shielding against electromagnetic or mechanical interference. For items that do not encompass personnel, see SHIELD, TEST.
What is a Cold Dip Tank? 131 Items: A Cold Dip Tank (TANK,COLD DIP) is a receptacle mainly constructed of metal, wood, earthenware, or stone. It may be equipped with discharge outlet(s), piping, valve(s), fitting(s), and the like. It may be used to clean metal with solvent or acid solutions, as insulating varnish bath for electric motor armatures, for enameling, quenching, preserving, and the like.
What is a Corrosive Material Mixing Tank? 21 Items: A Corrosive Material Mixing Tank (TANK,MIXING,CORROSIVE MATERIAL) is a tank designed primarily for mixing and storage of corrosive materials such as battery acid and the like. It may be equipped with an acidproof drain valve.
What is a Typewriter Repair Turntable? 52 Items: A Typewriter Repair Turntable (TURNTABLE,TYPEWRITER REPAIR) is a device equipped with a revolving platform supported by a low base.
What is a Multiposition Maintenance Fixture Holder? 145 Items: A Multiposition Maintenance Fixture Holder (HOLDER,MAINTENANCE FIXTURE,MULTIPOSITION) is a device having a stationary or adjustable base with movable arm(s) for affixing maintenance fixtures to hold items in convenient working positions. It is commonly used for benchwork and may be free standing. For items which include maintenance fixtures, see MAINTENANCE FIXTURE (as modified).
What is a Power Operated Pipe And Sewer Auger Machine? 52 Items: A Power Operated Pipe And Sewer Auger Machine (AUGER MACHINE,PIPE AND SEWER,POWER OPERATED) is a machine consisting of a portable steel frame on which is mounted an electric motor or gasoline engine designed to drive flexible steel cables and/or flexible steel rods by means of clutch controlled power cable retrieving equipment. The cables and rods are designed for the mounting of various types of augers and cutting blades. It is used to open clogged pipe and sewer lines. For hand held items designed with a drive similar to an electric drill, see AUGER KIT, WATER CLOSET-PIPE AND SEWER, ELECTRIC.
What is a Rotary Actuator Test Stand? 21 Items: A Rotary Actuator Test Stand (TEST STAND,ROTARY ACTUATOR) is a unit, consisting essentially of dynamometers and electrical power input and output(s), designed to test the performance and operation characteristics of an ACTUATOR, ELECTRO-MECHANICAL, ROTARY.
What is a Portable Electric Blower? 88 Items: A Portable Electric Blower (BLOWER,ELECTRIC,PORTABLE) is a hand-held device consisting of a structural frame, fan and motor, with a stem or nozzle. It is used for blowing sawdust and the like from motors, machinery, and other delicate equipment. Excludes CLEANER, VACUUM, ELECTRIC and CLEANER, VACUUM, PNEUMATIC with attachments for the purpose of picking up dust and particles of dirt by suction.
Parts Kit,Pressure Jet Steam Cleaner 57 Items
What is a Hand Operated Bearing Washer? 12 Items: A Hand Operated Bearing Washer (WASHER,BEARING,HAND OPERATED) is an item consisting of a gun, bearing holder, and usually a bucket with lid. A cone or roller bearing is placed in the holder on the bottom of the bucket, partially filled with cleaning fluid, with the nozzle of the gun resting on the bearing. The pumping action of the gun forces the liquid back and forth through the bearing removing old grease, dirt and foreign particles.
What is a Dipping-Draining Basket? 84 Items: A Dipping-Draining Basket (BASKET,DIPPING-DRAINING) is a container made of perforated or open mesh material. It may have handle(s), bail(s), or hand grips, and may be furnished with hook(s) for use with conveyor systems. It is used for dipping and draining objects when cleaning and/or applying preservative coatings.
What is a Self-Propelled Servicing Platform? 158 Items: A Self-Propelled Servicing Platform (SERVICING PLATFORM,SELF-PROPELLED) is a self-propolled item designed to provide a safe working platform for overhead or overhead and below the ground level installation, inspection, maintenance, repair, or construction operation. A small floored area (working platform) is mounted on articulated booms which may be rotated in any horizontal plane within the limits of the supporting equipment. The booms are cable and/or hydraulically operated and are controlled by mechanism located within the platform and/or on the vehicle. (Excludes MAINTENANCE PLATFORM and SERVICING PLATFORM, TRACTOR MOUNTED.)
What is a Transportable Electronic Shop? 56 Items: A Transportable Electronic Shop (ELECTRONIC SHOP,TRANSPORTABLE) is a transportable unmounted electronic maintenance shop incorporating electronic test equipment and facilities for repair of electronic and communications equipment.
What is a Self Pressurized Spray Kit? 40 Items: A Self Pressurized Spray Kit (SPRAY KIT,SELF PRESSURIZED) is an externally pressurized spray unit utilizing a container pressurized with a liquid gas, to atomize a product contained in a separate jar. Includes spray nozzle and valve with activating mechanism. It is used for spraying paints, primers, degreasing compounds, plastic sealing compounds, insecticides, or the like. Excludes aerosol self-contained spraying cans.
What is a Solvent-Water Pressure Cleaner? 760 Items: A Solvent-Water Pressure Cleaner (CLEANER,PRESSURE,SOLVENT-WATER) is a pressure cleaner used to project streams of water detergents, soaps, or cleaning solvents for cleaning motor vehicle exteriors, engines, aircraft exteriors, and the like. Excludes CLEANING GUN, WATER.
What is a Hydraulic Hose Assembly Tester? 60 Items: A Hydraulic Hose Assembly Tester (TESTER,HYDRAULIC HOSE ASSEMBLY) is a pneumatically operated unit consisting of a pump, a fluid reservoir, filters, lines, fittings, and control gages. It is specifically designed to perform proof pressure and leakage tests on hose assemblies.
Shop Equipment,Cbr Equipment 29 Items
Shop Equipment,Combat Vehicle Rebuild 42 Items
Shop Equipment,Communication Equipment 138 Items
What is an Electrical Equipment Shop Equipment? 36 Items: An Electrical Equipment Shop Equipment (SHOP EQUIPMENT,ELECTRICAL EQUIPMENT) is see also SHOP EQUIPMENT (1), ELECTRICAL EQUIPMENT, SEMI TRAILER MOUNTED.
Shop Equipment,Fuel And Electrical System,Engine 14 Items
Shop Equipment,Utility 515 Items
What is a Truck Mounted Utility Shop Equipment? 105 Items: A Truck Mounted Utility Shop Equipment (SHOP EQUIPMENT,UTILITY,TRUCK MOUNTED) is for use in conjunction with other motorized shops. Do not use if a more specific name is applicable.
Shop Equipment,Instrument 34 Items
Shop Equipment,Rescue And Safety Equipment 19 Items
What is a Storage Rack And Work Table Shop Equipment? 32 Items: A Storage Rack And Work Table Shop Equipment (SHOP EQUIPMENT,STORAGE RACK AND WORK TABLE) is a group of items consisting of work table tops, material for table top supports, and material for racks and/or shelves to be assembled in a van, shelter, or the like, to perform maintenance work.
What is a Tire Shop Equipment? 43 Items: A Tire Shop Equipment (SHOP EQUIPMENT,TIRE) is a group of items consisting of tools, accessories, and equipment, such as breakdown stands, vulcanizers, tire irons, and the like, designed for the repair of tires. Excludes SHOP EQUIPMENT (1), VULCANIZING, CABLE.
What is a Toolroom Shop Equipment? 61 Items: A Toolroom Shop Equipment (SHOP EQUIPMENT,TOOLROOM) is a group of special tools, materials and equipment, such as storage bins, portable crain, degreasers, disk and the like, used in conjunction with other shops.
What is a Cable Vulcanizing Shop Equipment? 15 Items: A Cable Vulcanizing Shop Equipment (SHOP EQUIPMENT,VULCANIZING,CABLE) is a group of items consisting of tools, accessories and equipment such as vulcanizer, vulcanizing molds, heating elements and the like, required for vulcanizing rubber covered cable. Excludes SHOP EQUIPMENT (1), TIRE.
What is a Welding Shop Equipment? 76 Items: A Welding Shop Equipment (SHOP EQUIPMENT,WELDING) is a group of items, such as welding machines, welding positioners, and the like, designed for general welding and cutting operations.
What is an Electronic Equipment Shop Equipment? 115 Items: An Electronic Equipment Shop Equipment (SHOP EQUIPMENT,ELECTRONIC EQUIPMENT) is see also SHOP EQUIPMENT (1), ELECTRONIC EQUIPMENT, SEMI TRAILER MOUNTED
Parts Kit,Spray Gun 190 Items
What is a Plastic Repair Kit? 46 Items: A Plastic Repair Kit (REPAIR KIT,PLASTIC) is an assortment of tools and application accessories and expendable materials, such as fibrous glass, cloth, mats, resin, rubber gloves, and the like, as are required for the repair of plastic items, such as cases, noninflatable boats, and the like.
What is a Radio Set Tool And Equipment Kit? 24 Items: A Radio Set Tool And Equipment Kit (TOOL AND EQUIPMENT KIT,RADIO SET) is a group of items specifically designed to perform maintenance on a radio set.
What is an Optical Instrument Tool And Equipment Kit? 188 Items: An Optical Instrument Tool And Equipment Kit (TOOL AND EQUIPMENT KIT,OPTICAL INSTRUMENT) is a group of items specifically designed to perform maintenance on an optical instrument.
What is a Metal Repair Kit? 49 Items: A Metal Repair Kit (REPAIR KIT,METAL) is a Repair Kit consisting of panels, tools, application accessories and expendable materials required for use on the panels of shelters, containers, craft, and the like.
What is a Positioning Table? 107 Items: A Positioning Table (TABLE,POSITIONING) is an item designed to accurately position another item for inspection, testing, maintenance or machining. The item is capable of linear and/or rotational movement but is not furnished with a work-holding device such as a chuck or vise. It may be manually operated or motor driven. Excludes POSITIONER, WELDING.
What is a Test Adapter Kit? 76 Items: A Test Adapter Kit (ADAPTER KIT,TEST) is an adapter kit containing items such as adapters, cables, power supply, switching units, and auxiliary test means. Cases and special tools may be included. It is used to adapt items to the standard interface of a piece of test equipment.
What is a Hose Reel Assembly? 241 Items: A Hose Reel Assembly (REEL ASSEMBLY,HOSE) is a circular device with flanged ends designed to accommodate a hose. May include components such as bracket(s), legs, hand crank, ratchet spring loaded device for automatic hose return, inlet and outlet ports for hose attachments. May be of high or low pressure and can be styled for floor, bench, service vehicle, trailer or ceiling mounted. Excludes WINCH, DRUM, (as modified).
What is a Semi Trailer Mounted Electrical Equipment Shop Equipment? 18 Items: A Semi Trailer Mounted Electrical Equipment Shop Equipment (SHOP EQUIPMENT,ELECTRICAL EQUIPMENT,SEMI TRAILER MOUNTED) is a van type mobile unit which houses a group of items not all having the same basic name specifically designed to repair electrical equipment. See also SHOP EQUIPMENT (1), ELECTRICAL EQUIPMENT.
What is a Contact Maintenance Shop Equipment? 51 Items: A Contact Maintenance Shop Equipment (SHOP EQUIPMENT,CONTACT MAINTENANCE) is item consists of utility type body mounted on a chassis. The shop set is intended to provide tools and equipment for intermediate level maintenance personnel, when operating in the field and to allow limited repair of equipment of supported organizations. Electrical power is provided by an installed generator operated by the vehicle's power take off.
What is an Organizational Maintenance Truck Mounted Shop Equipment? 11 Items: An Organizational Maintenance Truck Mounted Shop Equipment (SHOP EQUIPMENT,ORGANIZATIONAL MAINTENANCE TRUCK MOUNTED) is item consists of a mobile shop, with folding sides and a rear opening type body mounted on a chassis and provided with an auxiliary canvas enclosure for cold weather operation. This shop set is intended to provide machine tools, equipment, and work space to allow organizational personnel to perform maintenance at limited intermediate maintenance repair of organizational equipment in the field. Electrical power is provided by an installed generator operated by the vehicle's power take off.
What is a Paint Spray Gun Nozzle Kit? 66 Items: A Paint Spray Gun Nozzle Kit (NOZZLE KIT,SPRAY GUN,PAINT) is a kit consisting of a fluid nozzle, an air nozzle and a fluid needle valve assembly.
What is a Paint Spray Gun Air Nozzle? 78 Items: A Paint Spray Gun Air Nozzle (AIR NOZZLE,SPRAY GUN,PAINT) is an item designed to atomize the fluid flow of different kinds of paint, sealers, primers, epoxies and urethanes through the action of air jets under high pressure and speed. It may have an adjustable spray pattern. It may include or be used in conjunction with FLUID NOZZLE, SPRAY GUN, PAINT.
What is a Paint Spray Gun Fluid Nozzle? 210 Items: A Paint Spray Gun Fluid Nozzle (FLUID NOZZLE,SPRAY GUN,PAINT) is a device used to meter the fluid viscosity and volume by the orifice size and to direct the fluid into the air stream. It is used in conjunction with AIR NOZZLE, SPRAY GUN, PAINT and/or FLUID NEEDLE VALVE, SPRAY GUN, PAINT.
What is a Paint Spray Gun Fluid Needle Valve? 100 Items: A Paint Spray Gun Fluid Needle Valve (FLUID NEEDLE VALVE,SPRAY GUN,PAINT) is an item used in conjunction with FLUID NOZZLE, SPRAY GUN, PAINT to shut off the fluid flow and to meter the fluid to some degree.
What is a Maintenance Platform Section? 102 Items: A Maintenance Platform Section is an individual unit of metallic or nonmetallic material used with other pieces/parts to make up the MAINTENANCE PLATFORM; MAINTENANCE PLATFORM, AIRCRAFT; or MAINTENANCE PLATFORM, GUIDED MISSILE.
Cover,Steam Cleaner 20 Items
What is a Nonaircraft Pneumatic System Components Test Station? 21 Items: A Nonaircraft Pneumatic System Components Test Station (TEST STATION,PNEUMATIC SYSTEM COMPONENTS,NONAIRCRAFT) is a group of items containing a console and peripheral equipment specifically designed for use in testing pneumatic components of other than aircraft, such as valves, controls and pressure regulators. May also supply fuel or conditioned air, and provide a mechanical loading system along with appropriate instrumentation and data acquisition/control logic for testing. See also TEST SET, PNEUMATIC SYSTEM COMPONENTS.
What is an Actuator Pilot Pin? 42 Items: An Actuator Pilot Pin (PILOT PIN,ACTUATOR) is a headless cylindrical shaped item tapering along its length. A portion is threaded. It is used for aligining or fastening.
Air Cap,Spray Gun 120 Items
What is a Sewer Blade Cutter Assembly? 12 Items: A Sewer Blade Cutter Assembly (BLADE CUTTER ASSEMBLY,SEWER) is a rigid versatile cutting device consisting of multiple blades specifically designed for boring and/or tunneling into sewer pipes for the removal of debris.
What is a Sewer Pipe Cleaning Auger? 35 Items: A Sewer Pipe Cleaning Auger (AUGER,PIPE CLEANING,SEWER) is a flat, spiral blade with cutting edges of front and back sides, specifically designed for boring and/or tunneling into sewer pipes for the removal of debris. Must be operated by power equipment.
Gun Body,Blasting Unit 14 Items
Table Mat,Work Station 37 Items
Body,Spray Gun 44 Items
What is an Ultrasonic Cleaner? 237 Items: An Ultrasonic Cleaner (CLEANER,ULTRASONIC) is an electrical device designed to clean items by using ultrasonic pressure waves. It consists of an ultrasonic generator for ultrasonic scrubbing action, controls, and may have a stainless steel tank, a basket with or without a cover, and the like. It may also include a heating element and timer. Excludes DEGREASER; PARTS CLEANING CAN, SAFETY BENCH; and WASHING MACHINE LABORATORY.
What is a Mechanical Test Adapter Kit? 93 Items: A Mechanical Test Adapter Kit (ADAPTER KIT,MECHANICAL TEST) is a collection of various types of ADAPTER (1), MECHANICAL TEST with associated mechanical and/or hydraulic and/or pneumatic connectors, linkages, and fittings necessary for the adaptation of test items to the standard interface of a tester/test set. Cases, special tools and cleaning supplies may be included. Excludes ADAPTER SET, TEST.
What is a Mechanical Test Adapter? 819 Items: A Mechanical Test Adapter (ADAPTER,MECHANICAL TEST) is an item which provides facilities for mechanically connecting an item to be tested and a piece of test equipment. It may include hydraulic and/or pneumatic functions. Do not use for CONNECTOR, MULTIPLE, FLUID MEASURE LINE or MANIFOLD, HYDRAULIC SYSTEM ACCESSORIES or the like. Excludes ADAPTER (2), TEST.
What is a Platform Lift? 259 Items: A Platform Lift is an item of equipment which may be self-propelled, truck mounted or trailer mounted. Item is designed to provide a safe working platform for overhead installation, inspection, maintenance, repair or construction. A small floored area (working platform) is mounted on scissor arms for vertical extension only. Working platform may include a cantilever for additional horizontal reach. Scissor Arms are hydraulically operated and controlled by a mechanism located within the platform and/or on the vehicle. Excludes SERVICING PLATFORM, as modified and MAINTENANCE PLATFORM.
What is a Maintenance Basket Lift? 40 Items: A Maintenance Basket Lift (BASKET LIFT,MAINTENANCE) is an item consisting of a basket- or bucket-like conveyance for one or more persons to overhead or overhead and below the ground level installation, inspection, maintenance, repair or construction operations. The basket is mounted on articulated booms, designed to be mounted on a vehicle, which may be rotated in any horizontal plane within the limits of the supporting equipment. The controls mechanism may or may not be located within the basket.
What is a Blast Cleaning Room? 27 Items: A Blast Cleaning Room is a suitable inclosure equipped with necessary devices through which abrasive materials are ejected either by air pressure or by centrifugal force against surface to be cleaned. It is designed to allow the operator to perform his duties from his location within the inclosure. It may be additionally provided with material handling systems, and/or suitably equipped suits for inside operations. It may be stationary or portable.
What is a Drip Pan? 318 Items: A Drip Pan (PAN,DRIP) is a metallic or nonmetallic receptacle which is placed under a motor, generator, appliance or in a similar location to collect liquid from overflows, leaks, condensation and the like. It may have one or more facilities for draining.
What is a Trailer Mounted Maintenance Power Unit? 21 Items: A Trailer Mounted Maintenance Power Unit (POWER UNIT,MAINTENANCE,TRAILER MOUNTED) is a mobile power unit with electrical, pneumatic and/or hydralulic capabilities designed for full-service operation and full-serviceability. It consists of individual system modules to simplify service and maintenance. It is equipped with its own power, specilaized tools, supplies and equipment necessary to perform the required functions. This mobile unit will/can be used in the event of a power failure. See also POWER PLANT, UTILITY. Excludes TRAILER, MAINTENANCE.
What is a Recovery Still? 22 Items: A Recovery Still (STILL,RECOVERY) is a portable, mobile or stationary still for the reclamation of chlorinated hydrocarbon oil and solvents used in degreasers, paint and the like.
Shop Equipment,Metal Working 42 Items
Repair Kit,Electrical Cable 110 Items
Shop Equipment,Optics 30 Items
Shop Equipment,Optronics 76 Items
Shop Equipment,Tube Bending And Flaring 48 Items
Shop Equipment,Radar Equipment 49 Items
What is an Electric Glue Gun? 68 Items: An Electric Glue Gun (GLUE GUN,ELECTRIC) is a gun-shaped item designed to heat solid glue sticks thus enabling the application of the glue to a surface.
What is a Trailer Mounted Water Blasting Machine? 19 Items: A Trailer Mounted Water Blasting Machine (BLASTING MACHINE,WATER,TRAILER MOUNTED) is a cleaning unit comprised of a pump, a driver, hoses, guns and accessories used for heavy duty cleaning of steel and other hard surfaces through the means of a high pressure water system and may have a capability of adding sand for sand blasting applications.
What is a Mechanical Equipment Test Fixture? 302 Items: A Mechanical Equipment Test Fixture (FIXTURE,TEST,MECHANICAL EQUIPMENT) is a fixture used to position a mechanical device in a specific manner during testing of its various functions.
What is a Paint Electrical Spray Gun? 45 Items: A Paint Electrical Spray Gun (SPRAY GUN,ELECTRICAL,PAINT) is a electromechanical device, based on the airless spraying principle, for atomizing paint or similar material and ejecting it for the purpose of applying a coating to an object or surface at high speed.
What is a Shop Equipment Installation Kit? 52 Items: A Shop Equipment Installation Kit (INSTALLATION KIT,SHOP EQUIPMENT) is an installation kit to adapt a SHOP EQUIPMENT (as modified) in a container, trailer, semitrailer, shelter or the like.
What is a Calibration Shop Equipment? 86 Items: A Calibration Shop Equipment (SHOP EQUIPMENT,CALIBRATION) is a group of items consisting of tools, accessories, and equipment to calibrate TEST SET (as modified), meters and the like.
What is a Pressurizing Charging Kit? 47 Items: A Pressurizing Charging Kit (CHARGING KIT,PRESSURIZING) is a collection of components used to pressurize recoil mechanism in towed and self-propelled howitzers and the like. It consists of gage assemblies, charging assembly, cylinder valve adapters, and other relative components. May include case or box for housing or portability.
What is an Electrical System Repair Kit? 51 Items: An Electrical System Repair Kit (REPAIR KIT,ELECTRICAL SYSTEM) is a repair kit consisting of tools and spare parts such as lamps, fuses, fuse holders, contractors, switches and so on, which is used for the repair and maintenance of an electrical system as can be found in buildings or on watercraft.
What is an Electrical Gun Type Heater Deflector? 47 Items: An Electrical Gun Type Heater Deflector (DEFLECTOR,HEATER,GUN TYPE,ELECTRICAL) is an item of different shapes and sizes designed to deflect an air flow. It is used in the processing of heat-shrinking and other plastic products in connection with a HEATER, GUN TYPE, ELECTRICAL.
What is an Electrical Gun Type Heater Nozzle? 105 Items: An Electrical Gun Type Heater Nozzle (NOZZLE,HEATER,GUN TYPE,ELECTRICAL) is an item of different shapes and opening sizes through which an air flow is conducted. It is used in connection with a HEATER, GUN TYPE, ELECTRIC.
What is a Paint Protector? 35 Items: A Paint Protector (PROTECTOR,PAINT) is an rigid item of various shapes and sizes designed to protect certain parts of a vehicle, a shelter and the like, when coats of paint are applied.
What is a Dust And Moisture Seal Protective Cover? 19 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Loose Material Container Dump? 31 Items: A Loose Material Container Dump (CONTAINER DUMP,LOOSE MATERIAL) is an item designed for accommodation and transport of materials such as soil, stones, chips, wastes and the like. For drainage the item is equipped with a dumping device. The item is equipped with safety devices against sliding and unintended dumping and may include the following additional devices: cover, stacking device, rollers, fixtures for crane, dolly truck or pallet truck and the like. For use as a metal chip container a perforated plate may be inserted above the container bottom to separate coolant from the chips. Prior to dumping the coolant may be drained via a spout by means of an outlet cock.
What is an Electric Heat Gun? 339 Items: An Electric Heat Gun (HEAT GUN,ELECTRIC) is an electrically driven pistol-shaped device, normally hand-held, used to deliver hot air in excess of 100 degrees Celsius for drying, curing, forming, activating, softening, shrinking, and the like. The operating parts are usually housed in a protective inclosure. It may include air flow directing accessories and a means to hang the item. Excludes DRIER,ELECTRIC,HAND.
What is a Sewer Cleaning Root Saw? 15 Items: A Sewer Cleaning Root Saw (SAW,ROOT,SEWER CLEANING) is a rotating tool specifically designed as an accessory for a sewer cleaning machine. It is a continuous, rigid, circular band with teeth on the front and back edges, is center mounted on a shank/shaft, forming a peripheral shaped cutter-shredder. The rotating shaft/shank also has teeth that work as a pull back to accommodate the removal of roots and solid debris that has been cut. Must be rotated by power equipment. For items with spiral blade see AUGER, PIPE CLEANING, SEWER.
What is a Liquid Recovery Tank? 26 Items: A Liquid Recovery Tank (TANK,RECOVERY,LIQUID) is a container which is designed to recover, in case of incident, liquids such as fuel, oil, water and the like used for testing. More often than not it is an integral part of a fuel liquid quantity gage vibratory test bench. Excludes: TANK, LIQUID STORAGE; TANK, RADIATOR, OVERFLOW and LAGOON ASSEMBLY, RETENTION, COLLAPSIBLE TANK.
What is an Electronic Equipment Handling Unit? 30 Items: An Electronic Equipment Handling Unit (HANDLING UNIT,ELECTRONIC EQUIPMENT) is a handling unit, specifically designed for use in loading, unloading, mounting, removing, and/or assembling electronic equipment.
What is a Blast Cleaning Machine Parts Kit? 17 Items: A Blast Cleaning Machine Parts Kit (PARTS KIT,BLAST CLEANING MACHINE) is a parts kit used to replace worn and/or damaged parts of a BLAST CLEANING MACHINE.
What is an Electrical Test Set Adapter Subassembly? 11 Items: An Electrical Test Set Adapter Subassembly (ADAPTER SUBASSEMBLY,ELECTRICAL TEST SET) is an item which is a subassembly of an Adapter, Electrical Test Set and cannot be assigned a more definite item name.
What is a Cleaning Kit Optical Element Nest? 32 Items: A Cleaning Kit Optical Element Nest (NEST,OPTICAL ELEMENT,CLEANING KIT) is an item designed to accommodate a lens or another element to be cleaned.
What is a Hose Assembly Machine Chuck Pad? 18 Items: A Hose Assembly Machine Chuck Pad (PAD,CHUCK,HOSE ASSEMBLY MACHINE) is a flat, basically rectangular shaped item specifically designed to be used with a hose assembly machine. One end is notched to match either two or three sides of a standard wrenching facility of a fitting. It is used to tailor the holding capability of the chuck to a given size or range of sizes.
What is a Miscellaneous Maintenance And Repair Shop Equipment Modification Kit? 255 Items: A Miscellaneous Maintenance And Repair Shop Equipment Modification Kit (MODIFICATION KIT,MISCELLANEOUS MAINTENANCE AND REPAIR SHOP EQUIPMENT) is an item or items employed to modify specially designed miscellaneous maintenance and repair shop equipment.
What is a Transportable Maintenance Facility? 34 Items: A Transportable Maintenance Facility (MAINTENANCE FACILITY,TRANSPORTABLE) is the facility is equipped with work benches, storage cabinets, racks, lighting, air conditioning and power to form an electronic repair shop for the maintenance of electronic equipment. The power is usually supplied by a single 10KW Power Unit.
What is a Communications Spares Facility? 76 Items: A Communications Spares Facility (SPARES FACILITY,COMMUNICATIONS) is containes the spare parts required to support the maintenance and repair of communications assets.
What is a Gear Box Maintenance Fixture? 11 Items: A Gear Box Maintenance Fixture (MAINTENANCE FIXTURE,GEAR BOX) is a device for temporarily supporting and holding a gear box unit during repair and/or test.
What is a Cable Breakout Adapter? 122 Items: A Cable Breakout Adapter (ADAPTER,CABLE BREAKOUT) is an item designed to electrically and physically accommodate cable connectors and the terminations to which the cable would normally be connected, and thereby provide facilities for the insertion of test equipment leads, probes, and the like, for test and/or monitoring of power, intelligence, and the like, that may be on the wire complement of the cable. The item may provide facilities for either series, shunt, or interwire tests of the cable under actual operating conditions.
What is a Test Adapter Set? 51 Items: A Test Adapter Set (ADAPTER SET,TEST) is a grouping of items consisting of two or more ADAPTER (2), TEST. May include a mounting, or other facility for storage and rapid access to individual adapters.
What is a Test Set Coupler? 14 Items: A Test Set Coupler (COUPLER,TEST SET) is a component which provides a means of transfer of electrical energy between a test set and another component(s). See also ADAPTER, TEST.
What is a Test Equipment Dolly? 49 Items: A Test Equipment Dolly (DOLLY,TEST EQUIPMENT) is a hand-propelled device consisting of three or more wheels attached to a frame, and designed for carrying or supporting test equipment. May include facilities for connecting and interconnecting components of the test equipment to obtain electrical operating power or functional utility. Test equipment components are not included.
What is an Antenna Drive Maintenance Fixture? 27 Items: An Antenna Drive Maintenance Fixture (MAINTENANCE FIXTURE,ANTENNA DRIVE) is a device for temporarily supporting and holding an antenna drive unit during repair and/or test.
What is a Hydraulic Sealing Compound Gun? 19 Items: A Hydraulic Sealing Compound Gun (SEALING COMPOUND GUN,HYDRAULIC) is a specifically designed item utilizing a hydraulic cylinder which develops a high pressure to force SEALING COMPOUND through a cylindrical container and special fittings to secure optical elements, and the like, in a fixed position within an instrument. The cylinders are connected by a flexible high pressure hose which includes the necessary connectors and a pressure gage. Excludes CALKING GUN; LUBRICATING GUN, HAND; and GREASE GUN, PNEUMATIC.
What is a Vehicle Instrument Drill Jig? 17 Items: A Vehicle Instrument Drill Jig (JIG,DRILL,INSTRUMENT,VEHICLE) is an item designed to align drill points in preparing the mounting of an instrument in a vehicle. Excludes BUSHING, DRILL and GUIDE, DRILL.
What is a Dry Nitrogen Purging System? 17 Items: A Dry Nitrogen Purging System (PURGING SYSTEM,DRY NITROGEN) is an apparatus designed to purge equipment that require humidity protection and moisture inhibition such as electronics, electro optical, high voltage switchgear, cameras, lenses and thermal imaging systems and the like, using dry nitrogen.
What is a Magnetic Lifting Tool? 18 Items: A Magnetic Lifting Tool (LIFTING TOOL,MAGNETIC) is a permanent lifting magnet designed to lift, move and fasten various ferrous materials and workpieces.
What is a Nitrogen Charging And Testing Unit? 21 Items: A Nitrogen Charging And Testing Unit (CHARGING AND TESTING UNIT,NITROGEN) is a mobile unit used to charge and test an item (infrared equipment, guided missile, guided missile shipping and storage container and the like) containing nitrogen. It allows one to verify nitrogen pressure and may analyze the item using a nitrogen scan. It can be reloaded from a source containing nitrogen such as a bottle or the like.

Stock Items From Supply Class 4940 Page 42of 103

4940-01-117-9104
Bail

011179104
31406: RNCC: 3 | RNVC: 2
50965: RNCC: 5 | RNVC: 2

24 Aug 1981

4940-01-117-9103
Power End

011179103
31404: RNCC: 3 | RNVC: 2
50757: RNCC: 5 | RNVC: 2

24 Aug 1981

4940-01-117-9100
Body

011179100
30762: RNCC: 3 | RNVC: 2
50782: RNCC: 5 | RNVC: 2

24 Aug 1981

4940-01-117-9099
Mount

011179099
11487: RNCC: 3 | RNVC: 2
25711: RNCC: 5 | RNVC: 2

24 Aug 1981

4940-01-117-9098
Street Ell

011179098
10707: RNCC: 3 | RNVC: 2
412033-001: RNCC: 3 | RNVC: 2
25595: RNCC: 5 | RNVC: 2

24 Aug 1981

4940-01-117-9096
Cap

011179096
10462: RNCC: 3 | RNVC: 2
25555: RNCC: 5 | RNVC: 2
410462-001: RNCC: C | RNVC: 1

24 Aug 1981

4940-01-117-9097
Cap

011179097
10686: RNCC: 3 | RNVC: 2
50740: RNCC: 5 | RNVC: 2

24 Aug 1981

4940-01-117-9095
Cap

011179095
410461-001: RNCC: 3 | RNVC: 2
10461: RNCC: 3 | RNVC: 2
25557: RNCC: 5 | RNVC: 2

24 Aug 1981

4940-01-117-9070
Flange

011179070
31489: RNCC: 3 | RNVC: 2
50943: RNCC: 5 | RNVC: 2

24 Aug 1981

4940-01-117-9078
Pole

011179078
70701: RNCC: 3 | RNVC: 2
25007: RNCC: 5 | RNVC: 2

24 Aug 1981

4940-01-117-9077
Spindle

011179077
60699: RNCC: 3 | RNVC: 2
25017: RNCC: 5 | RNVC: 2

24 Aug 1981

4940-01-117-9068
Snubber

011179068
31022: RNCC: 3 | RNVC: 2
50742: RNCC: 5 | RNVC: 2

24 Aug 1981

4940-01-117-9074
Tapered Tongue

011179074
60652: RNCC: 3 | RNVC: 2

24 Aug 1981

4940-01-117-9066
Unit Drawer

011179066
11426: RNCC: 3 | RNVC: 2
25966: RNCC: 5 | RNVC: 2

24 Aug 1981

4940-01-117-9062
Muffler

011179062
50930: RNCC: 3 | RNVC: 2
31472: RNCC: 3 | RNVC: 2

24 Aug 1981

4940-01-117-9064
Collar

011179064
55134: RNCC: 3 | RNVC: 2

24 Aug 1981

4940-01-117-9058
Umbrella

011179058
11539: RNCC: 3 | RNVC: 2
25889: RNCC: 5 | RNVC: 2

24 Aug 1981

4940-01-117-9059
Skimmer

011179059
30990: RNCC: 3 | RNVC: 2
50741: RNCC: 5 | RNVC: 2

24 Aug 1981

4940-01-117-9061
Adapter

011179061
31409: RNCC: 3 | RNVC: 2
50737: RNCC: 5 | RNVC: 2
4035-24-16: RNCC: C | RNVC: 1

24 Aug 1981

4940-01-117-9057
Canopy Holder

011179057
11534: RNCC: 3 | RNVC: 2
25991: RNCC: 5 | RNVC: 2

24 Aug 1981

4940-01-117-9053
Tank

011179053
31410: RNCC: 3 | RNVC: 2
50948: RNCC: 5 | RNVC: 2

24 Aug 1981

4940-01-117-9052
Fuel Tank

011179052
31403: RNCC: 3 | RNVC: 2
50940: RNCC: 5 | RNVC: 2

24 Aug 1981

4940-01-117-9045
Cap

011179045
11476: RNCC: 3 | RNVC: 2
25709: RNCC: 5 | RNVC: 2

24 Aug 1981

4940-00-554-9859
Electromagnetic Shielding Enclosure

005549859
42H3: RNCC: 3 | RNVC: 2

1 Jan 1963

4940-00-553-8149
Electromagnetic Shielding Enclosure

005538149
MILE4957: RNCC: 4 | RNVC: 1

1 Jan 1960

4940-01-115-0495
Liquid Mixer

011150495
M31: RNCC: 3 | RNVC: 2
M25: RNCC: 5 | RNVC: 9

27 Jun 1981

4940-01-114-6090
Blast Cleaning Cabinet

011146090
ACDFM3048: RNCC: 3 | RNVC: 9

19 Jun 1981

4940-01-113-8540
Test Adapter Set

011138540
25-37405-79: RNCC: 3 | RNVC: 2

5 Jun 1981

4940-01-113-5025
Blast Cleaning Cabinet

011135025
4836-F: RNCC: 3 | RNVC: 2
4836-SRC: RNCC: 5 | RNVC: 2

28 May 1981

4940-01-113-4868
Crystal

011134868
1311202D: RNCC: 3 | RNVC: 2

28 May 1981

4940-01-113-4869
Pack Plate

011134869
A10541: RNCC: 3 | RNVC: 2

28 May 1981

4940-01-113-4866
Clean Work Station

011134866
940-51: RNCC: 3 | RNVC: 9
940A-5: RNCC: C | RNVC: 1

28 May 1981

4940-01-113-4865
Foot Valve

011134865
909018: RNCC: 3 | RNVC: 2

28 May 1981

4940-01-112-6267
Shelf Assembly

011126267
11825830: RNCC: 3 | RNVC: 2

7 May 1981

4940-01-109-1817
Tubing Kit Pressure

011091817
11504: RNCC: 3 | RNVC: 2
25819: RNCC: C | RNVC: 1

12 Mar 1981

4940-01-109-1247
Power Unit Assembly

011091247
31479: RNCC: 3 | RNVC: 2
50765: RNCC: C | RNVC: 1

11 Mar 1981

4940-00-542-0002
Electromagnetic Shielding Enclosure

005420002
MX1761U: RNCC: 3 | RNVC: 2
MILE8881: RNCC: 4 | RNVC: 1
42H3: RNCC: 5 | RNVC: 9
WN3H3: RNCC: 5 | RNVC: 9
71X2: RNCC: 5 | RNVC: 9
2669: RNCC: 5 | RNVC: 9
42103: RNCC: E | RNVC: 8

1 Jan 1963

4940-01-107-0440
Control Box

011070440
D718-116: RNCC: 3 | RNVC: 2
D-718-04 ITEM 1: RNCC: 5 | RNVC: 2

30 Jan 1981

4940-01-106-5667
Ram Guide

011065667
L112: RNCC: 3 | RNVC: 2
L112: RNCC: 5 | RNVC: 9

22 Jan 1981

4940-01-106-3787
Electric Gun Type Heater

011063787
45B345: RNCC: 3 | RNVC: 2
AA45B345: RNCC: 5 | RNVC: 9

16 Jan 1981

4940-01-104-3787
Filter Screen

011043787
9421M99G02: RNCC: 3 | RNVC: 2
P15614: RNCC: 3 | RNVC: 2

3 Dec 1980

4940-01-104-3789
Cap

011043789
TE1508.1: RNCC: 3 | RNVC: 2

3 Dec 1980

4940-01-104-3786
Retainer

011043786
P14078: RNCC: 3 | RNVC: 2

3 Dec 1980

4940-01-104-3778
Screen Cylinder

011043778
A14088: RNCC: 3 | RNVC: 2

3 Dec 1980

4940-01-104-3781
Hydraulic Adapter

011043781
CA72262: RNCC: 3 | RNVC: 2

3 Dec 1980

4940-01-104-3777
Printer Panel

011043777
DA68912-1: RNCC: 3 | RNVC: 2

3 Dec 1980

4940-01-104-1270
Seat

011041270
10341: RNCC: 3 | RNVC: 2
25522: RNCC: 5 | RNVC: 2
50704: RNCC: 5 | RNVC: 9

28 Nov 1980

4940-00-529-0451
Degreaser

005290451
MX1760G: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-01-098-9712
Spraying Booth

010989712
808225: RNCC: 3 | RNVC: 2
BF-3 1/2 6-T-B: RNCC: 5 | RNVC: 2

9 Aug 1980

4940-01-098-4137
Blast Cleaning Machine

010984137
30AA-2: RNCC: 3 | RNVC: 2
U-350RCG: RNCC: 3 | RNVC: 2
111-1189G (100-3075): RNCC: 5 | RNVC: 2

1 Aug 1980

4940-01-098-2581
Hydraulic System Components Test Stand

010982581
KT3326: RNCC: 3 | RNVC: 9
KT3326: RNCC: C | RNVC: 1

29 Jul 1980

4940-01-097-5289
St Cleaning Machine

010975289
60STEAM CLEANER: RNCC: 3 | RNVC: 9

15 Jul 1980

4940-00-516-5615
Internal Boiler Tube And Flue Cleaner

005165615
EPB175: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-516-5617
External Boiler Tube And Flue Cleaner

005165617
EPB262: RNCC: 3 | RNVC: 9

1 Jan 1961

4940-01-093-5556
Hydro-Air Gun Assem

010935556
STK-251: RNCC: 3 | RNVC: 9
2190776: RNCC: 5 | RNVC: 2
D-718-06 ITEM 2: RNCC: 5 | RNVC: 9
STK-251: RNCC: 5 | RNVC: 9

19 Apr 1980

4940-01-093-5545
Transducer Assembly

010935545
101510: RNCC: 3 | RNVC: 9

19 Apr 1980

4940-01-093-5544
Contact Plate

010935544
10079H: RNCC: 3 | RNVC: 9

19 Apr 1980

4940-01-093-1861
Ul Cleaning Machine

010931861
UTCM-15H: RNCC: 3 | RNVC: 9

10 Apr 1980

4940-01-092-6257
Actuator

010926257
E6696: RNCC: 3 | RNVC: 2
E6696: RNCC: 5 | RNVC: 9

30 Mar 1980

4940-01-092-3921
Generator Assembly

010923921
087590-1: RNCC: 3 | RNVC: 2

26 Mar 1980

4940-01-092-2251
Sealant Mixer Plate Assembly

010922251
1549-5: RNCC: 3 | RNVC: 9

21 Mar 1980

4940-01-091-5103
Cabinet-Left Lock

010915103
5669L(25): RNCC: 3 | RNVC: 2
13221E6686: RNCC: 3 | RNVC: 2

9 Mar 1980

4940-01-090-3746
Sonic Dryer

010903746
3272210-3010: RNCC: 3 | RNVC: 2

16 Feb 1980

4940-01-090-3744
Sonic Rinse

010903744
3272220-1010: RNCC: 3 | RNVC: 2
3272220-1010: RNCC: C | RNVC: 1

16 Feb 1980

4940-01-090-3745
Drain Screen

010903745
432576-1: RNCC: 3 | RNVC: 2

16 Feb 1980

4940-01-089-9966
Antenna Holding Fixture

010899966
667989: RNCC: 3 | RNVC: 2
667989: RNCC: 3 | RNVC: 9

10 Feb 1980

4940-01-089-4840
Elect Spraying Unit

010894840
3001E: RNCC: 3 | RNVC: 9
4940-2981-0000: RNCC: 6 | RNVC: 9

2 Feb 1980

4940-01-089-4839
Spray Gun Nozzle

010894839
13020/507: RNCC: 3 | RNVC: 9

2 Feb 1980

4940-01-089-4838
Spray Disc

010894838
13020/506A: RNCC: 3 | RNVC: 9
13020/506: RNCC: 5 | RNVC: 9

2 Feb 1980

4940-01-089-4836
Impeller Propeller

010894836
13020/503: RNCC: 3 | RNVC: 9

2 Feb 1980

4940-01-085-5070
Door Stop

010855070
13221E6702: RNCC: 3 | RNVC: 2

9 Nov 1979

4940-01-084-7839
Hydraulic System Components Test Stand

010847839
3197990: RNCC: 3 | RNVC: 2
3197990: RNCC: 3 | RNVC: 9
4940-5579-5728: RNCC: 6 | RNVC: 9

24 Oct 1979

4940-01-081-7284
Armature Maintenance Stand

010817284
3901: RNCC: 3 | RNVC: 2
E-3901 IAS HD: RNCC: C | RNVC: 1

18 Aug 1979

4940-01-081-6554
Starter

010816554
120503-001: RNCC: 3 | RNVC: 2
575733-017: RNCC: 5 | RNVC: 9

18 Aug 1979

4940-00-494-7680
Degreaser

004947680
MVR215: RNCC: 3 | RNVC: 9

6 Mar 1970

4940-01-080-3558
Heater

010803558
575314-009: RNCC: 3 | RNVC: 2

25 Jul 1979

4940-00-491-5409
Ultrasonic Cleaner

004915409
2874: RNCC: 3 | RNVC: 2

6 Jun 1969

4940-01-078-4140
Burner Housing

010784140
1060276: RNCC: 3 | RNVC: 9

13 Jun 1979

4940-01-078-4138
Fuel Pump

010784138
1158575: RNCC: 3 | RNVC: 9

13 Jun 1979

4940-00-484-9178
Degreaser

004849178
MLR120: RNCC: 3 | RNVC: 9
4S95083-101A: RNCC: 7 | RNVC: 2

18 Jun 1974

4940-01-073-4853
Refrigerant Gas Leak Detector

010734853
H25C-1N-6-N-E-P3: RNCC: 3 | RNVC: 2
H25C-1-N-6-N-E-P3: RNCC: 5 | RNVC: 9
50-420810HFJK1: RNCC: 5 | RNVC: 9
50-420810HFJK1: RNCC: 5 | RNVC: 9
50-420810HFJK: RNCC: 5 | RNVC: 9
H25: RNCC: 5 | RNVC: 9
000-8006-212: RNCC: 7 | RNVC: 2

16 Mar 1979

4940-00-478-6996
Spray Mix Applicator

004786996
299: RNCC: 3 | RNVC: 2
BB299: RNCC: 5 | RNVC: 2

15 Jan 1971

4940-01-071-5644
Trailer Mounted Pressure Jet Steam Cleaner

010715644
204-USN: RNCC: 3 | RNVC: 2

10 Feb 1979

4940-00-476-2671
Flexible Holder

004762671
4851: RNCC: 3 | RNVC: 9

9 Jun 1974

4940-00-476-2590
Flexible Holder

004762590
4662U: RNCC: 3 | RNVC: 9

9 Jun 1974

4940-00-476-2619
Flexible Holder

004762619
4704SU: RNCC: 3 | RNVC: 9

9 Jun 1974

4940-00-476-2498
Rotor Blade Set

004762498
2978: RNCC: 3 | RNVC: 9

9 Jun 1974

4940-01-069-6503
Leak Detector Baffle

010696503
0981-83834-301: RNCC: 3 | RNVC: 2
83834-301: RNCC: 5 | RNVC: 2

20 Dec 1978

4940-01-069-1981
Shop Maintenance Tray

010691981
3262062: RNCC: 3 | RNVC: 2

10 Dec 1978

4940-01-069-1980
Shop Maintenance Tray

010691980
3262063: RNCC: 3 | RNVC: 2
3262063: RNCC: 5 | RNVC: 9

10 Dec 1978

4940-01-069-1982
Shop Maintenance Tray

010691982
3262061: RNCC: 3 | RNVC: 2

10 Dec 1978

4940-01-069-1979
Shop Maintenance Tray

010691979
3262059: RNCC: 3 | RNVC: 2
3262059: RNCC: 5 | RNVC: 9

10 Dec 1978

4940-01-069-1978
Shop Maintenance Tray

010691978
3262060: RNCC: 3 | RNVC: 2
3262060: RNCC: 5 | RNVC: 9

10 Dec 1978

4940-01-068-1125
Ultra Cleaner

010681125
HT-2011-IPA: RNCC: 3 | RNVC: 2
HT11-2: RNCC: 5 | RNVC: 9

16 Nov 1978

4940-01-068-0407
Charging And Gaging

010680407
8031-701904: RNCC: 3 | RNVC: 2

15 Nov 1978

4940-01-067-2877
Revolving Shaft Liquid Mixer

010672877
NAG33: RNCC: 3 | RNVC: 2

27 Oct 1978

4940-01-067-0646
Stud Nut

010670646
9325999-2: RNCC: 3 | RNVC: 2
9325999: RNCC: D | RNVC: 9

24 Oct 1978

4940-01-066-8338
Revolving Shaft Liquid Mixer

010668338
XJA100: RNCC: 3 | RNVC: 2
NAG100: RNCC: 5 | RNVC: 9

19 Oct 1978

4940-01-066-5634
Flameless Torch

010665634
FT-200: RNCC: 3 | RNVC: 9

13 Oct 1978

4940-01-066-2120
Bulk Wire Dispensing Station

010662120
2350-5: RNCC: 3 | RNVC: 9

4 Oct 1978

4940-01-065-2350
Paint Spray Gun Nozzle Extension

010652350
C360: RNCC: 3 | RNVC: 2

11 Sep 1978

4940-01-064-9500
Vacuum Pot Transparent Plastic Top

010649500
580CD801-3: RNCC: 3 | RNVC: 2

6 Sep 1978

4940-01-064-9499
Pneumatic Cleaner Adapter

010649499
490CC253: RNCC: 3 | RNVC: 2

6 Sep 1978

4940-01-064-4267
Tee Bar Splice Assembly

010644267
HE85-34: RNCC: 3 | RNVC: 9

24 Aug 1978

4940-01-064-4268
Solvent-Water Pressure Cleaner

010644268
3/1000 SSOV & 0001 & 0006: RNCC: 3 | RNVC: 2
09125A: RNCC: 3 | RNVC: 2
CHARGER: RNCC: 5 | RNVC: 9
HDS 650: RNCC: 5 | RNVC: 9
7504: RNCC: 5 | RNVC: 9
CRUSADOR 1: RNCC: 5 | RNVC: 9

24 Aug 1978

4940-00-462-4812
Press Bracket Assy

004624812
6515: RNCC: 3 | RNVC: 9
06515: RNCC: 5 | RNVC: 9

7 May 1969

4940-01-062-9274
High Pr Control Gun

010629274
711: RNCC: 3 | RNVC: 2
54725: RNCC: 3 | RNVC: 2
31414: RNCC: 5 | RNVC: 2
50785: RNCC: 5 | RNVC: 9

23 Jul 1978

4940-01-061-3621
Root Saw

010613621
RT-1X: RNCC: 3 | RNVC: 9

17 Jun 1978

4940-01-061-3620
Root Saw

010613620
RT-2X: RNCC: 3 | RNVC: 9

17 Jun 1978

4940-01-060-9497
Blast Cleaning Machine

010609497
DFH8484: RNCC: 3 | RNVC: 2

7 Jun 1978

4940-01-060-9423
General Purpose Shop Equipment

010609423
TB34-4010: RNCC: 3 | RNVC: 9

7 Jun 1978

4940-01-060-9422
Shop Maintenance Tray

010609422
TW46TT: RNCC: 3 | RNVC: 9

7 Jun 1978

4940-01-060-9421
General Purpose Shop Equipment

010609421
TB34-4011: RNCC: 3 | RNVC: 9

7 Jun 1978

4940-01-060-4780
Auxillary Spring Kit

010604780
11020335: RNCC: 3 | RNVC: 9

24 May 1978

4940-01-059-8199
Blast Cleaning Machine Cylinder

010598199
30911-0020: RNCC: 3 | RNVC: 2
30911-0020: RNCC: 5 | RNVC: 9
30911-0020: RNCC: 5 | RNVC: 9

16 Apr 1978

4940-01-056-8961
Blast Cleaning Vibrator

010568961
360-030-30: RNCC: 3 | RNVC: 2
970-000: RNCC: 3 | RNVC: 9
970-00: RNCC: 5 | RNVC: 9

3 Mar 1978

4940-01-056-8958
Laminar Flow Work Table

010568958
42F: RNCC: 3 | RNVC: 9

3 Mar 1978

4940-01-056-8133
Male Adapter

010568133
65532: RNCC: 3 | RNVC: 2
FZ1051: RNCC: 5 | RNVC: 9

1 Mar 1978

4940-01-054-0040
Heat Gun Element Socket

010540040
991262: RNCC: 3 | RNVC: 2

13 Jan 1978

4940-01-053-6639
Leak Detector Bottle

010536639
HLD443: RNCC: 3 | RNVC: 2

8 Jan 1978

4940-01-052-1566
Accumulat Parts Kit

010521566
203304-1: RNCC: 3 | RNVC: 2
203304-1: RNCC: 5 | RNVC: 9
203419-1: RNCC: 5 | RNVC: 9

11 Dec 1977

4940-01-052-0857
Blast Machine Roller Assembly

010520857
P672943: RNCC: 3 | RNVC: 2

10 Dec 1977

4940-01-052-0858
Shot Peening Screen

010520858
MI170: RNCC: 3 | RNVC: 2

10 Dec 1977

4940-01-050-6867
Holddown Assembly Bumper

010506867
926011: RNCC: 3 | RNVC: 2

12 Nov 1977

4940-01-049-7606
Paint Tank Top

010497606
0-5662: RNCC: 3 | RNVC: 2

23 Oct 1977

4940-01-049-7607
Paint Tank Air Hose

010497607
H-107: RNCC: 3 | RNVC: 2

23 Oct 1977

4940-01-049-7575
Repair Circuit Board Bench

010497575
PCBRM-6: RNCC: 3 | RNVC: 2

23 Oct 1977

4940-01-049-2903
Jig Hole Indicator Holder

010492903
3056A: RNCC: 3 | RNVC: 2

15 Oct 1977

4940-01-049-0386
Spray Gun Paint Cup

010490386
TGC-536: RNCC: 3 | RNVC: 2
KR552: RNCC: 5 | RNVC: 9
TGC535: RNCC: 5 | RNVC: 9

10 Oct 1977

4940-01-048-9464
Paint Spray Gun Fluid Needle Valve

010489464
AG406E: RNCC: 3 | RNVC: 2

7 Oct 1977

4940-01-048-9463
Spray Gun Parts Kit

010489463
EGA-4000-E: RNCC: 3 | RNVC: 2
EGA608E: RNCC: 5 | RNVC: 9

7 Oct 1977

4940-01-048-9469
Blast Machine Rubber Tip

010489469
ATP109: RNCC: 3 | RNVC: 2

7 Oct 1977

4940-01-048-9472
Shot Peen Nozzle Assembly

010489472
B6953: RNCC: 3 | RNVC: 2

7 Oct 1977

4940-01-048-9470
Pressure Cup Paint Spray Gun Protector

010489470
KB-420: RNCC: 3 | RNVC: 2

7 Oct 1977

4940-01-048-9467
Paint Spray Gun Air Cap

010489467
AF439-36: RNCC: 3 | RNVC: 2

7 Oct 1977

4940-01-048-9465
Air Jet

010489465
S49102: RNCC: 3 | RNVC: 2

7 Oct 1977

4940-01-048-9468
Paint Spray Gun Fluid Nozzle

010489468
63BSS: RNCC: 3 | RNVC: 2
63B: RNCC: 5 | RNVC: 9

7 Oct 1977

4940-01-048-8940
Feed Valve Assembly

010488940
129062: RNCC: 3 | RNVC: 2
129057: RNCC: C | RNVC: 1

7 Oct 1977

4940-01-048-8941
Upper Gear Cage

010488941
504014: RNCC: 3 | RNVC: 2

7 Oct 1977

4940-01-048-8939
Paint Spray Gun

010488939
61R: RNCC: 3 | RNVC: 2

7 Oct 1977

4940-01-048-8944
Air Motor Spindle Gear

010488944
240863: RNCC: 3 | RNVC: 2

7 Oct 1977

4940-01-048-8937
Sand Blast Air Tip

010488937
7020-31-5: RNCC: 3 | RNVC: 2

7 Oct 1977

4940-01-048-7997
Dry Blast Metering Disc

010487997
1-630215: RNCC: 3 | RNVC: 2

4 Oct 1977

4940-01-048-7992
Spray Gun Parts Kit

010487992
C-39-K5: RNCC: 3 | RNVC: 2
C-39-K5: RNCC: 5 | RNVC: 9

4 Oct 1977

4940-01-048-7999
Cloth Cleaning Bag

010487999
1400A02: RNCC: 3 | RNVC: 2
140-2D1: RNCC: 5 | RNVC: 9

4 Oct 1977

4940-01-047-0206
Air Blow Gun

010470206
2R: RNCC: 3 | RNVC: 9

27 Aug 1977

4940-01-046-9981
Fuel Detector Assembly

010469981
61-1111: RNCC: 3 | RNVC: 9

27 Aug 1977

4940-01-046-9980
Blast Cleaning Machine Repair Kit

010469980
03081-0020: RNCC: 3 | RNVC: 2
03081-0020: RNCC: 3 | RNVC: 9
30901-8001: RNCC: 5 | RNVC: 9

27 Aug 1977

4940-01-046-9918
Sleeve And Glove Assembly

010469918
S492384: RNCC: 3 | RNVC: 2

27 Aug 1977

4940-01-046-8602
Quad Ring

010468602
S620511: RNCC: 3 | RNVC: 2

25 Aug 1977

4940-01-046-8600
Feed Valve

010468600
129056: RNCC: 3 | RNVC: 2

25 Aug 1977

4940-01-046-4983
Ultrasonic Oscillator

010464983
087264-1: RNCC: 3 | RNVC: 1
087264-001: RNCC: 5 | RNVC: 9

19 Aug 1977

4940-01-046-4982
Ultrasonic Amplifier

010464982
087263-1: RNCC: 3 | RNVC: 1

19 Aug 1977

4940-01-046-4142
Cutter Saw

010464142
SP27987SA: RNCC: 3 | RNVC: 2

17 Aug 1977

4940-00-439-6092
Degreaser

004396092
7242AEXP: RNCC: 3 | RNVC: 2
A1R72EHEXP: RNCC: 5 | RNVC: 9

3 Dec 1969

4940-01-045-5923
Spearblade

010455923
SP279885A: RNCC: 3 | RNVC: 2

5 Aug 1977

4940-00-435-7765
Electronic Shop She

004357765
ANASM147B: RNCC: 3 | RNVC: 2

21 Mar 1969

4940-01-041-2266
Vertical Pump Housing

010412266
65-126: RNCC: 3 | RNVC: 2

21 May 1977

4940-01-040-6959
Air Blow Gun

010406959
B43-87-3: RNCC: 3 | RNVC: 2

12 May 1977

4940-01-039-5462
Air Blow Gun

010395462
8785HW: RNCC: 3 | RNVC: 9
SPCC SPEC: RNCC: C | RNVC: 1

23 Apr 1977

4940-01-038-1884
Strainer Adapter

010381884
SSP3: RNCC: 3 | RNVC: 9

31 Mar 1977

4940-01-038-0216
Coil Winding Machine

010380216
4PAS: RNCC: 3 | RNVC: 2
4940-3161-1039: RNCC: 6 | RNVC: 9

27 Mar 1977

4940-01-037-7769
Hose Reel Assembly

010377769
67579: RNCC: 3 | RNVC: 2
67579: RNCC: 3 | RNVC: 9

24 Mar 1977

4940-01-037-3343
Filement

010373343
59-10-099: RNCC: 3 | RNVC: 9

17 Mar 1977

4940-01-037-2688
Air Blow Gun

010372688
S5-30-1/4IN-NPT: RNCC: 3 | RNVC: 9

16 Mar 1977

4940-01-037-0100
Blast Cleaning Machine

010370100
S1CPACF35S4: RNCC: 3 | RNVC: 2
MIL-B-83756: RNCC: 4 | RNVC: 1

10 Mar 1977

4940-01-036-5810
Special Tools And Testequipment Repair Kit

010365810
13217E4450: RNCC: 3 | RNVC: 2

1 Mar 1977

4940-01-036-3810
Spray Gun Side Port Body

010363810
54-1017: RNCC: 3 | RNVC: 2

26 Feb 1977

4940-01-036-2951
Pump Wear Plate

010362951
65-85: RNCC: 3 | RNVC: 2

24 Feb 1977

4940-01-036-1923
Injector Assembly

010361923
10732: RNCC: 3 | RNVC: 2
25674: RNCC: 5 | RNVC: 2

24 Feb 1977

4940-01-036-1924
Safety Shroud

010361924
50796: RNCC: 3 | RNVC: 2
31160: RNCC: 3 | RNVC: 2
11926: RNCC: 3 | RNVC: 2
31450: RNCC: 5 | RNVC: 2

24 Feb 1977

4940-01-035-6343
Pump Follower

010356343
93-250-2: RNCC: 3 | RNVC: 2

12 Feb 1977

4940-01-035-1149
Paint Spray Outfit

010351149
H81876: RNCC: 3 | RNVC: 1

4 Feb 1977

4940-00-413-5052
Hose Expander

004135052
2789: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-413-5048
Cylinder Casing

004135048
2800: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-01-034-9739
Discharge Cap

010349739
S-354: RNCC: 3 | RNVC: 9

1 Feb 1977

4940-01-034-9742
Sump Cleaner

010349742
PS1000175-10: RNCC: 3 | RNVC: 9

1 Feb 1977

4940-01-034-9725
Rim

010349725
PATT-9069: RNCC: 3 | RNVC: 2

1 Feb 1977

4940-01-034-1661
Burner Nozzle

010341661
535-05: RNCC: 3 | RNVC: 9

20 Jan 1977

4940-01-034-1662
Ignition Electrode

010341662
225-2-03: RNCC: 3 | RNVC: 9

20 Jan 1977

4940-01-033-7298
Boiler Tube Leak Detector Kit

010337298
DK500267: RNCC: 3 | RNVC: 2

8 Jan 1977

4940-01-033-6630
Flexible Hose Piece

010336630
X6315: RNCC: 3 | RNVC: 9
X6615: RNCC: 5 | RNVC: 9

8 Jan 1977

4940-01-032-6779
Side Control

010326779
541024: RNCC: 3 | RNVC: 2

18 Dec 1976

4940-01-032-4243
Heat Gun Fixture

010324243
AD-1481: RNCC: 3 | RNVC: 2

15 Dec 1976

4940-00-408-4953
Mount Assembly

004084953
SCB539429: RNCC: 3 | RNVC: 9
SCB539429: RNCC: D | RNVC: 9

10 Jul 1970

4940-00-408-3529
Degreaser

004083529
B-220: RNCC: 3 | RNVC: 2
220: RNCC: 5 | RNVC: 9

8 Jul 1970

4940-01-031-5723
Paint Spray Gun Air Nozzle

010315723
33PR: RNCC: 3 | RNVC: 2

26 Nov 1976

4940-01-031-5313
Spray Gun Body

010315313
54-2481: RNCC: 3 | RNVC: 2

26 Nov 1976

4940-01-031-0846
Plunger Packing Kit

010310846
08-92P80: RNCC: 3 | RNVC: 9

18 Nov 1976

4940-01-030-7517
Metal Bowl

010307517
11-5685: RNCC: 3 | RNVC: 9
11-5686: RNCC: 5 | RNVC: 9

12 Nov 1976

4940-01-030-5228
Valve Kit

010305228
80060: RNCC: 3 | RNVC: 9

8 Nov 1976

4940-00-401-8591
Degreaser

004018591
MILD26847: RNCC: 4 | RNVC: 1

3 Apr 1970

4940-01-027-6255
Hose Expansion Ring Expander

010276255
HB-15: RNCC: 3 | RNVC: 2
HB-102: RNCC: 3 | RNVC: 2

19 Sep 1976

4940-01-027-4321
Air Blow Gun

010274321
407-30B: RNCC: 3 | RNVC: 9

17 Sep 1976

4940-00-396-1660
Trailer Mounted Pressure Jet Steam Cleaner

003961660
HRMAC: RNCC: 3 | RNVC: 2
MIL-C-4036: RNCC: 4 | RNVC: 1

1 Jan 1963

4940-01-025-5944
Bridge Table Ball Rail

010255944
143684: RNCC: 3 | RNVC: 2
143684A: RNCC: C | RNVC: 1

5 Aug 1976

4940-01-025-5943
Table Ball Track

010255943
143683: RNCC: 3 | RNVC: 2
143683A: RNCC: C | RNVC: 1

5 Aug 1976

4940-01-025-5942
Bridge Ball Track

010255942
143647: RNCC: 3 | RNVC: 2

5 Aug 1976

4940-01-025-5227
Antenna Level Axis

010255227
3178-109: RNCC: 3 | RNVC: 2

4 Aug 1976

4940-01-025-5009
Demagnetizer

010255009
10115: RNCC: 3 | RNVC: 2

4 Aug 1976

4940-01-025-1453
High Speed Undercutter Saw

010251453
65-HS/.035IN/: RNCC: 3 | RNVC: 2

27 Jul 1976

4940-01-023-8096
Cleaner Pressure

010238096
247549: RNCC: 3 | RNVC: 2
226314: RNCC: 5 | RNVC: 9
226-314: RNCC: 5 | RNVC: 9
226-314: RNCC: 5 | RNVC: 9

26 Jun 1976

4940-00-393-3922
Hose Assy

003933922
7053-35: RNCC: 3 | RNVC: 9
7053-0035: RNCC: C | RNVC: 1

1 Jan 1963

4940-00-391-4640
Reseater

003914640
20153: RNCC: 3 | RNVC: 9
S5101-3134566: RNCC: 5 | RNVC: 2

1 Jan 1963

4940-00-391-4639
Jig

003914639
1017: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4638
Jig

003914638
1009A: RNCC: 3 | RNVC: 9
1009: RNCC: 5 | RNVC: 9

1 Jan 1963

4940-00-391-4636
Jig

003914636
1007B: RNCC: 3 | RNVC: 9
1007: RNCC: 5 | RNVC: 9

1 Jan 1963

4940-00-391-4627
Shaft And Casing

003914627
4065: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4618
Shaft And Casing

003914618
6660: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4606
Countershaft

003914606
5775: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4601
Guide

003914601
4748: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4597
Cylinder Casing

003914597
4167: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4599
Rotor Blade

003914599
4171: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4578
Shaft And Casing

003914578
3666: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4572
Rotor Blades

003914572
3116: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4588
Belt Guard

003914588
L853N1PC38: RNCC: 3 | RNVC: 9
3707: RNCC: 5 | RNVC: 9

1 Jan 1963

4940-00-391-4584
Shaft And Casing

003914584
3694: RNCC: 3 | RNVC: 9
L853N1PC3694: RNCC: 5 | RNVC: 9
L853N1PC101: RNCC: 5 | RNVC: 9

1 Jan 1963

4940-00-391-4586
Spindle

003914586
L853N1PC14: RNCC: 3 | RNVC: 9
3697: RNCC: 5 | RNVC: 9

1 Jan 1963

4940-00-391-4581
Shaft Coupling

003914581
3669: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4573
Rotor Blade

003914573
3131: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4569
Rotor Blade

003914569
3103: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4563
Coupling Set

003914563
2911: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4558
Rotor Blade

003914558
2797: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4566
Blade

003914566
3098: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4562
Coupling Set

003914562
2902: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4552
Rotor Blades

003914552
2787: RNCC: 3 | RNVC: 9
2787: RNCC: 5 | RNVC: 2
NY460-622-4PC518: RNCC: 5 | RNVC: 9

1 Jan 1963

4940-00-391-4554
Hose Expander

003914554
2790: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4550
Cylinder Casing

003914550
2784: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4544
Hose Expander

003914544
2770: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4547
Rotor Blade

003914547
7777: RNCC: 3 | RNVC: 9
2777: RNCC: 5 | RNVC: 9

1 Jan 1963

4940-00-391-4543
Hose Expander

003914543
2769: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4541
Rotor Blade

003914541
2767: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4539
Cylinder Casing

003914539
2764: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4530
Cylinder Casing

003914530
2746: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4532
Hose Expander

003914532
2751: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-391-4521
Vibrator Tube Head

003914521
23: RNCC: 3 | RNVC: 9
F0R11-20DTUBES: RNCC: 5 | RNVC: 9

1 Jan 1961

4940-00-391-4520
Vibrator Tube Head

003914520
L853NSH2PC96: RNCC: 3 | RNVC: 9
22: RNCC: 5 | RNVC: 9
F0R13-80DTUBES: RNCC: 5 | RNVC: 9

1 Jan 1963

4940-00-391-4522
Vibrator Tube Head

003914522
L853NSH2PC60: RNCC: 3 | RNVC: 9
35: RNCC: 5 | RNVC: 9

1 Jan 1963

4940-00-391-4518
Vibrator Tube Head

003914518
19: RNCC: 3 | RNVC: 9
F0R1IN0DTUBES: RNCC: 5 | RNVC: 9

1 Jan 1961

4940-00-391-0053
Degreaser

003910053
361820: RNCC: 3 | RNVC: 2

1 Jan 1963

4940-01-021-7926
Monorail Machine Cam Rod

010217926
144723: RNCC: 3 | RNVC: 9

20 May 1976

4940-01-021-7923
Sewer Pipe Cleaning Auger

010217923
C100: RNCC: 3 | RNVC: 9

20 May 1976

4940-01-020-5477
Monorail Machine Cam

010205477
144725: RNCC: 3 | RNVC: 9

30 Apr 1976

4940-01-020-4818
Monorail Machine Support Angle

010204818
85317: RNCC: 3 | RNVC: 9

30 Apr 1976

4940-01-020-4820
Monorail Machine Link

010204820
115361: RNCC: 3 | RNVC: 9

30 Apr 1976

4940-01-020-4821
Monorail Machine Cross Head

010204821
115363: RNCC: 3 | RNVC: 9

30 Apr 1976

4940-01-020-4819
Monorail Machine Link

010204819
115360: RNCC: 3 | RNVC: 9

30 Apr 1976

4940-01-020-4817
Traction Wheel Assembly

010204817
114649: RNCC: 3 | RNVC: 9

30 Apr 1976

4940-01-020-4815
Machine Contact Arm Roller

010204815
104773: RNCC: 3 | RNVC: 9

30 Apr 1976

4940-01-020-1546
Base Mounting Work Positioner

010201546
LM202-111: RNCC: 3 | RNVC: 9

25 Apr 1976

4940-01-019-1058
Compr Sediment Bowl

010191058
11-5265: RNCC: 3 | RNVC: 9

14 Apr 1976

4940-01-019-0182
Pipe Auger Machine Connector

010190182
C12A: RNCC: 3 | RNVC: 9

13 Apr 1976

4940-01-019-0183
Spray Unit Spray Tip

010190183
P164951540: RNCC: 3 | RNVC: 9

13 Apr 1976

4940-01-018-9515
Spray Gun Paint Cup

010189515
81-700: RNCC: 3 | RNVC: 2

2 Apr 1976

4940-01-018-9514
Monorail Machine Plate

010189514
45289: RNCC: 3 | RNVC: 9

2 Apr 1976

4940-01-018-9139
Open Cutter

010189139
20-3IN: RNCC: 3 | RNVC: 2

2 Apr 1976

4940-01-018-8603
Maintenance Platform

010188603
CB57-4200810: RNCC: 3 | RNVC: 9

30 Mar 1976

4940-01-018-5872
Sewer King Splicer

010185872
C41: RNCC: 3 | RNVC: 9

29 Mar 1976

4940-01-018-5003
Monorail Machine Liner

010185003
114926-5: RNCC: 3 | RNVC: 9

29 Mar 1976

4940-01-018-2401
Rotoblast Table Plate

010182401
PATT.12725: RNCC: 3 | RNVC: 2

23 Mar 1976

4940-01-018-2400
Heat Gun Armature Assembly

010182400
991012: RNCC: 3 | RNVC: 2

23 Mar 1976

4940-01-018-2399
Dust Collector Hub

010182399
P-52931: RNCC: 3 | RNVC: 2

23 Mar 1976

4940-01-018-2398
Rotoblast Table Plate

010182398
PATT.12726: RNCC: 3 | RNVC: 2

23 Mar 1976

4940-01-018-1019
Monorail Machine Liner

010181019
144900-2: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-1020
Monorail Machine Liner

010181020
114926-2: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0651
Cold Dip Tank

010180651
LTH610-6: RNCC: 3 | RNVC: 2

20 Mar 1976

4940-01-018-0411
Monorail Machine Hanger

010180411
114797: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0430
Monorail Machine Guide

010180430
144724: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0421
Monorail Machine Curtain

010180421
144958: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0427
Monorail Machine Retainer

010180427
70796: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0424
Monorail Machine Retainer

010180424
70797: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0425
Monorail Machine Disc

010180425
70800: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0428
Monorail Machine Base

010180428
144721: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0422
Monorail Machine Bar

010180422
145030: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0419
Monorail Machine Bar

010180419
89385: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0420
Monorail Machine Keeper

010180420
89389: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0416
Monorail Machine Liner

010180416
114926-4: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0418
Monorail Machine Support

010180418
79418: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0414
Monorail Machine Liner

010180414
114926-1: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0415
Monorail Machine Liner

010180415
114926-3: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0410
Monorail Machine Cover Assembly

010180410
75388: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0413
Monorail Machine Liner

010180413
144900-1: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0412
Monorail Machine Rubber

010180412
144804: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0406
Monorail Machine Countershaft

010180406
100731: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0409
Monorail Machine Bar

010180409
75348: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0404
Monorail Machine Housing

010180404
49838: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0405
Monorail Machine Head Spout

010180405
100847: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0407
Monorail Machine Ring

010180407
75387: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0403
Monorail Machine Plate

010180403
63577: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0394
Machine End Liner

010180394
133079: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0401
Monorail Machine Plate

010180401
120717: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0408
Monorail Machine Cover Plate

010180408
75350: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0399
Monorail Machine Clamp

010180399
120697: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0400
Monorail Machine Support

010180400
120746: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0396
Monorail Machine Deflector Plate

010180396
130264: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0395
Monorail Machine Angle Clamp

010180395
59178: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0393
Machine Circular Liner

010180393
152063: RNCC: 3 | RNVC: 9
54911: RNCC: 5 | RNVC: 9

20 Mar 1976

4940-01-018-0392
Machine Air Ladeer Cylinder

010180392
112550: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0391
Monorail Machine Control Valve Lever

010180391
109285: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0390
Monorail Machine Adapter

010180390
93419: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0384
Monorail Machine Lock Cap

010180384
94881: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0388
Monorail Machine Feed Funnel

010180388
93422: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0386
Base And Cap Assembly

010180386
94832: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0380
Monorail Machine Impeller

010180380
81856: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0387
Monorail Machine Locking Casting

010180387
94879: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0385
Monorail Machine Housing Bearing

010180385
94878: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0376
Monorail Machine Curtain

010180376
89388: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0381
Monorail Machine Control Cage

010180381
93426: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0382
Monorail Machine Control Cage

010180382
93650: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0377
Monorail Machine Bar

010180377
114744: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0374
Monorail Machine Bar

010180374
80469: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0373
Monorail Machine Bar

010180373
80470: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0368
Monorail Machine Lip

010180368
45314: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0371
Monorail Machine Lip

010180371
63008: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0372
Monorail Machine Curtain

010180372
80474: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0367
Monorail Machine Retainer

010180367
45313: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0366
Monorail Machine Valve Body

010180366
45316: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0370
Monorail Machine Valve

010180370
42206: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0363
Monorail Machine Screen

010180363
105055: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0354
Monorail Machine Belt

010180354
152246: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0356
Monorail Machine Rotary Screen

010180356
105058: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0360
Monorail Machine Drive Hub

010180360
105054: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0355
Monorail Machine Bucket

010180355
16849: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-00-376-8988
Degreaser

003768988
31-958B: RNCC: 3 | RNVC: 9

1 Jan 1961

4940-00-368-5220
Finishing-Material Pressure-Feed Tank

003685220
83-5707: RNCC: 3 | RNVC: 2
TU78A: RNCC: 5 | RNVC: 9

1 Jan 1963

4940-00-349-6820
Brush Refill

003496820
5811: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-349-6821
Brush Refill

003496821
2457-3-4-18GA: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-336-8961
Retainer Cap

003368961
2461: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-336-8960
End Cap

003368960
2459: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-322-6281
Telephone Cable Pressurizing Kit

003226281
07267: RNCC: 3 | RNVC: 9
TYPEB: RNCC: 5 | RNVC: 9
7267: RNCC: 5 | RNVC: 9
B: RNCC: 5 | RNVC: 9

1 Jan 1963

4940-00-322-6058
Ammunition Tool Kit

003226058
SC4940-95CLA11: RNCC: 3 | RNVC: 2

1 Jan 1963

4940-00-318-9078
Adapter

003189078
6656: RNCC: 3 | RNVC: 9
L853NSH1PC313: RNCC: 5 | RNVC: 9

1 Jan 1963

4940-00-318-9076
Adapter

003189076
2546: RNCC: 3 | RNVC: 9
L853NSH2PC83: RNCC: 5 | RNVC: 9

1 Jan 1963

4940-00-314-9789
Electric Gun Type Heater

003149789
HGT-500-LW: RNCC: 3 | RNVC: 2
MIL-H-45193SIZE2: RNCC: 4 | RNVC: 1
991609: RNCC: 5 | RNVC: 2
CV5700MINIGUN3: RNCC: 5 | RNVC: 2
3402-HL1500S: RNCC: 5 | RNVC: 9

7 Nov 1973

4940-00-307-2745
Air Blow Gun

003072745
1910: RNCC: 3 | RNVC: 2
CV530012K: RNCC: 5 | RNVC: 2
HL1920E-KIT-120V: RNCC: 5 | RNVC: 2
CV5300: RNCC: 5 | RNVC: 9
PH-1200-1A: RNCC: 5 | RNVC: 9
PH-1200-1: RNCC: 5 | RNVC: 9
HL1802E-KIT-120V: RNCC: 5 | RNVC: 9
41516: RNCC: 5 | RNVC: 9
PH-1200-1/35027: RNCC: 5 | RNVC: 9
991332: RNCC: 5 | RNVC: 9

19 Oct 1973

4940-00-294-6294
Electrically Operated Armature Mica Undercutter

002946294
25-029: RNCC: 3 | RNVC: 2

1 Jan 1963

4940-00-294-5936
Degreaser

002945936
0P2-85: RNCC: 3 | RNVC: 2
MILD26847: RNCC: 4 | RNVC: 1
MILD26847CLASSISIZED: RNCC: 4 | RNVC: 1

1 Jan 1963

4940-00-293-9182
Degreaser

002939182
9989-10A: RNCC: 3 | RNVC: 2

1 Jan 1963

4940-00-276-8868
Degreaser

002768868
MILD45064: RNCC: 2 | RNVC: 2
20MM: RNCC: 5 | RNVC: 1

5 Oct 1966

4940-00-255-8246
Degreaser

002558246
C90E: RNCC: 3 | RNVC: 2

1 Jan 1963

4940-00-254-4780
Internal Boiler Tube And Flue Cleaner

002544780
C4SHSPCLSZ: RNCC: 3 | RNVC: 9
MILC17370: RNCC: 4 | RNVC: 1
D2897: RNCC: 5 | RNVC: 2
D665-34: RNCC: 5 | RNVC: 2
D66500A: RNCC: 5 | RNVC: 2
D66500N: RNCC: 5 | RNVC: 2

1 Jan 1963

4940-00-244-4897
Degreaser

002444897
C42E: RNCC: 3 | RNVC: 2

1 Jan 1960

4940-00-243-3246
Electrically Operated Armature Mica Undercutter

002433246
25-048: RNCC: 3 | RNVC: 2
LIST25-048: RNCC: 5 | RNVC: 2

1 Jan 1963

4940-00-236-4284
Paint Spray Gun Fluid Nozzle

002364284
163-815: RNCC: 3 | RNVC: 2
AAM-815: RNCC: 5 | RNVC: 2
AAM-815: RNCC: 5 | RNVC: 2

25 Jun 1969

4940-00-224-7788
Internal Boiler Tube And Flue Cleaner

002247788
5780X3714X2446: RNCC: 3 | RNVC: 2
MILC2684: RNCC: 4 | RNVC: 1
CSD115VDC2T40DTB: RNCC: 5 | RNVC: 9
D115VDC2T43-4HP: RNCC: 5 | RNVC: 9

1 Jan 1963

4940-00-224-7783
Internal Boiler Tube And Flue Cleaner

002247783
CSAB7521-115VAC: RNCC: 3 | RNVC: 9
7521: RNCC: 5 | RNVC: 9

1 Jan 1963

4940-00-224-7785
Internal Boiler Tube And Flue Cleaner

002247785
MILC2684TYPEACSIZED: RNCC: 3 | RNVC: 1
D115VAC2T4: RNCC: 5 | RNVC: 9

1 Jan 1963

4940-00-224-7780
Internal Boiler Tube And Flue Cleaner

002247780
MILC17370SIZE2: RNCC: 2 | RNVC: 2
MIL-T-17370: RNCC: 4 | RNVC: 1
D667NA: RNCC: 5 | RNVC: 1
C10-2799: RNCC: 5 | RNVC: 1
X66C0MP: RNCC: 5 | RNVC: 9
MDLC10EQUIPMENT: RNCC: 5 | RNVC: 9
C8SPECIAL: RNCC: C | RNVC: 1

1 Jan 1963

4940-00-224-7778
Internal Boiler Tube And Flue Cleaner

002247778
X-61: RNCC: 3 | RNVC: 9
D663NA: RNCC: 5 | RNVC: 2
C4-2763: RNCC: 5 | RNVC: 9
X-61: RNCC: 5 | RNVC: 9
X-61: RNCC: 5 | RNVC: 9

1 Jan 1963

4940-00-216-7135
Degreaser

002167135
13638-1B: RNCC: 3 | RNVC: 2
13638-1B: RNCC: 5 | RNVC: 9

1 Jan 1963

4940-00-203-1490
Degreaser

002031490
14: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-200-1209
Degreaser

002001209
KS20KLEERFL0: RNCC: 3 | RNVC: 2

1 Jan 1963

4940-00-181-3206
Portable Hydraulic Press

001813206
28623: RNCC: 3 | RNVC: 2

19 Oct 1970

4940-00-169-3038
Electronic Equipment Shop Equipment

001693038
SEER1963: RNCC: 3 | RNVC: 2

9 Aug 1971

4940-00-141-8504
Degreaser

001418504
AIR48EH: RNCC: 3 | RNVC: 2

1 Jan 1963

4940-00-139-3658
Leak Detector

001393658
540A: RNCC: 3 | RNVC: 9
540M0D: RNCC: 5 | RNVC: 9
4940-5316-0000: RNCC: 6 | RNVC: 9

4 Jan 1973

4940-00-130-8441
Trailer Mounted Pressure Jet Steam Cleaner

001308441
33B2CB: RNCC: 3 | RNVC: 2
MIL-C-4036: RNCC: 4 | RNVC: 1

6 Dec 1968

4940-00-127-7805
Hose Assembly Machine Chuck Pad

001277805
F2152-13A: RNCC: 3 | RNVC: 2

27 Nov 1968

4940-00-112-9848
Internal Boiler Tube And Flue Cleaner

001129848
C10: RNCC: 3 | RNVC: 9

9 Sep 1968

4940-00-079-4927
Internal Boiler Tube And Flue Cleaner

000794927
ECT287: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-063-4099
Degreaser

000634099
0P2-72: RNCC: 3 | RNVC: 2

1 Jan 1963

4940-00-026-4917
Hydraulic Transport

000264917
M4-6: RNCC: 3 | RNVC: 9

21 Oct 1972

4940-00-011-5175
Cleaner Machin Head

000115175
27: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-01-018-0365
Monorail Machine Sleeve

010180365
45315: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0362
Monorail Machine Screen

010180362
170101: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0364
Monorail Machine Screen

010180364
124849: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0352
Monorail Machine Seal Assembly

010180352
61123: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0350
Monorail Machine Plate

010180350
112182: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0348
Monorail Machine Plate

010180348
112181: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0346
Monorail Machine Housing

010180346
112173: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0344
Monorail Machine Guard

010180344
101186: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0345
Monorail Machine Clamp

010180345
81448: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0347
Monorail Machine Support

010180347
112178: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0328
Monorail Machine Cylinder

010180328
147726: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0324
Monorail Machine Lug

010180324
93425: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0327
Monorail Machine Housing

010180327
78480: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0326
Monorail Machine Plate

010180326
45674: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0325
Monorail Machine Plate

010180325
45673: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0323
Setscrews And Bushings

010180323
47682: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-018-0322
Setscrews And Bushings

010180322
46974: RNCC: 3 | RNVC: 9

20 Mar 1976

4940-01-016-5923
Back Ring

010165923
21681-3: RNCC: 3 | RNVC: 2
21681-3: RNCC: 5 | RNVC: 9
21681-3: RNCC: 5 | RNVC: 9
21681-3: RNCC: C | RNVC: 1

15 Feb 1976

4940-01-016-4642
Heatgun Type Electric Vent

010164642
991102: RNCC: 3 | RNVC: 2

12 Feb 1976

4940-01-016-4637
Sewerking Feed Coil

010164637
CRX1: RNCC: 3 | RNVC: 9

12 Feb 1976

4940-01-016-4271
Heat Gun Assembly

010164271
6966C AND 6965A: RNCC: 3 | RNVC: 2
6966C AND 6965A: RNCC: 3 | RNVC: 9

12 Feb 1976

4940-01-015-5311
Monorail Machine Liner

010155311
144463: RNCC: 3 | RNVC: 9

23 Jan 1976

4940-01-015-4738
Sealant Gun Connector Assembly

010154738
SP-1245A: RNCC: 3 | RNVC: 9

22 Jan 1976

4940-01-015-2128
Sealant Gun Connector Assembly

010152128
SP-1288A: RNCC: 3 | RNVC: 9

16 Jan 1976

4940-01-014-8138
Commutator Mica Milling Cutter

010148138
32-HS/.025/: RNCC: 3 | RNVC: 2

6 Jan 1976

4940-01-014-8139
Commutator Mica Milling Cutter

010148139
32-HS/.015/: RNCC: 3 | RNVC: 2

6 Jan 1976

4940-01-014-8054
Heating Tool Wheel Blower

010148054
991014: RNCC: 3 | RNVC: 2

6 Jan 1976

4940-01-014-5405
Commutator Mica Milling Cutter

010145405
32-HS/.020/: RNCC: 3 | RNVC: 2

24 Dec 1975

4940-01-014-0482
Sewer Pipe Cleaning Auger

010140482
C2: RNCC: 3 | RNVC: 9

14 Dec 1975

4940-01-013-4754
Sewer Blade Cutter Assembly

010134754
C3-3: RNCC: 3 | RNVC: 9

5 Dec 1975

4940-01-013-4663
Sewer Pipe Cleaning Auger

010134663
C1: RNCC: 3 | RNVC: 9

5 Dec 1975

4940-01-013-4661
Monorail Machine Bar

010134661
114641-46B1309: RNCC: 3 | RNVC: 9

5 Dec 1975

4940-01-013-1987
Sewer Machine Connector

010131987
C13: RNCC: 3 | RNVC: 9

27 Nov 1975

4940-01-013-1986
Sewer Machine Knife Saw

010131986
C10-2-A: RNCC: 3 | RNVC: 9

27 Nov 1975

4940-01-013-1985
Sewer Machine Premium Cable

010131985
C50: RNCC: 3 | RNVC: 9

27 Nov 1975

4940-01-013-1615
Sewer Machine Rod

010131615
R26C: RNCC: 3 | RNVC: 9

27 Nov 1975

4940-01-013-1614
Sewer Blade Cutter Assembly

010131614
C-3-4: RNCC: 3 | RNVC: 9

27 Nov 1975

4940-01-013-1613
Sewer Blade Cutter Assembly

010131613
C-3-2: RNCC: 3 | RNVC: 9

27 Nov 1975

4940-01-013-1612
Sewer Cleaning Root Saw

010131612
C10/4: RNCC: 3 | RNVC: 9

27 Nov 1975

4940-01-013-1611
Zap Gun Timer Assembly

010131611
993436: RNCC: 3 | RNVC: 2

27 Nov 1975

4940-01-013-1607
Sewer Cleaning Root Saw

010131607
C10/2: RNCC: 3 | RNVC: 9

27 Nov 1975

4940-01-013-1610
Zap Gun Cover

010131610
993168: RNCC: 3 | RNVC: 2

27 Nov 1975

4940-01-013-0446
Monorail Machine Dustube Filter Bag

010130446
107279: RNCC: 3 | RNVC: 9

22 Nov 1975

4940-01-012-7015
Monorail Machine Sideliner

010127015
142794: RNCC: 3 | RNVC: 9

16 Nov 1975

4940-01-012-6738
Abrasive Control As

010126738
114765: RNCC: 3 | RNVC: 9

16 Nov 1975

4940-01-012-5258
Soap Control Valve Assembly

010125258
K3968: RNCC: 3 | RNVC: 2

12 Nov 1975

4940-01-009-3292
Housing Gun Trigger

010093292
993302: RNCC: 3 | RNVC: 2

8 Sep 1975

4940-01-009-2244
Spray Gun Head

010092244
54-707: RNCC: 3 | RNVC: 2

5 Sep 1975

4940-01-008-7168
Machine Mandrel Assembly

010087168
B5240-212: RNCC: 3 | RNVC: 9
B5240-212: RNCC: 5 | RNVC: 9

29 Aug 1975

4940-01-008-4623
Degreaser

010084623
T299: RNCC: 3 | RNVC: 2

24 Aug 1975

4940-01-006-5241
Self-Propelled Servicing Platform

010065241
R-70: RNCC: 3 | RNVC: 9

18 Jul 1975

4940-01-005-6037
Cabinet Blast Cleaning

010056037
4836: RNCC: 3 | RNVC: 2
MIL-B-45022: RNCC: 4 | RNVC: 1

30 Jun 1975

4940-01-004-1430
Fluid Heating And Dispensing Unit

010041430
42-6001: RNCC: 3 | RNVC: 2

22 May 1975

4940-01-003-9973
Sewer Raider Spear Blade

010039973
SP27988SA: RNCC: 3 | RNVC: 9

15 May 1975

4940-01-003-9972
Sewer Raider Blade

010039972
SP27987A: RNCC: 3 | RNVC: 9

15 May 1975

4940-01-003-6190
Molded Upper Body

010036190
5469084P2: RNCC: 3 | RNVC: 2

1 May 1975

4940-01-003-6187
Heat Gun Armature Assembly

010036187
TG-7: RNCC: 3 | RNVC: 2

1 May 1975

4940-01-003-6188
Gun Brush Assembly

010036188
TG-10: RNCC: 3 | RNVC: 2

1 May 1975

4940-00-999-6952
Transportable Electronic Shop

009996952
ANTYA24: RNCC: 3 | RNVC: 2
758-5073-001: RNCC: 5 | RNVC: 2

14 Mar 1966

4940-00-998-3104
Pump Field Assy

009983104
27563A: RNCC: 3 | RNVC: 2

13 Apr 1967

4940-00-997-3168
Cleaner Switch Assy

009973168
5142: RNCC: 3 | RNVC: 9

11 Apr 1967

4940-00-997-3167
Clea Casting Handle

009973167
54008: RNCC: 3 | RNVC: 9
1019M: RNCC: 5 | RNVC: 9

11 Apr 1967

4940-00-991-3703
Shelter Support Jack Assembly

009913703
GS1329: RNCC: 3 | RNVC: 2

1 Jan 1962

4940-00-990-7064
Air Blow Gun

009907064
600-03230: RNCC: 3 | RNVC: 2
600-03230: RNCC: 5 | RNVC: 9

1 Jan 1962

4940-00-990-4791
Degreaser Coil

009904791
C081359-1: RNCC: 3 | RNVC: 2
081359-1: RNCC: 5 | RNVC: 2

8 Nov 1966

4940-00-990-4762
Filter Adapter

009904762
C081495-1: RNCC: 3 | RNVC: 2
081495-1: RNCC: 5 | RNVC: 2

8 Nov 1966

4940-00-979-8784
Lock

009798784
5631-UR: RNCC: 3 | RNVC: 2
5613-3P0INT: RNCC: 5 | RNVC: 9
PP52: RNCC: 5 | RNVC: 9
5613-3P0INT: RNCC: 5 | RNVC: 9

1 Jan 1963

4940-00-973-2129
Leak Reactor Plate

009732129
50Y86: RNCC: 3 | RNVC: 9

1 Jan 1962

4940-00-972-0498
Vulcanizing Adapter

009720498
6169000: RNCC: 3 | RNVC: 2
S19678PC13: RNCC: 5 | RNVC: 2
519678PC13: RNCC: 5 | RNVC: 9

1 Jan 1962

4940-00-972-0497
Cable Breakout Adapter

009720497
6169028: RNCC: 3 | RNVC: 2

1 Jan 1962

4940-00-970-6863
Ultranson Generator

009706863
S-7040-12: RNCC: 3 | RNVC: 2
AP25B: RNCC: 5 | RNVC: 9
EMA30: RNCC: 5 | RNVC: 9

1 Jan 1962

4940-00-970-6864
Transducerized Tank

009706864
ATH610-6: RNCC: 3 | RNVC: 2
T60: RNCC: 5 | RNVC: 9

1 Jan 1962

4940-00-969-2481
Shell Assembly

009692481
5-2302: RNCC: 3 | RNVC: 9
6-0573PC105: RNCC: 5 | RNVC: 9

1 Jan 1962

4940-00-969-0533
Sieve Bottom

009690533
V2MESH: RNCC: 3 | RNVC: 2
TYPEV2MESH: RNCC: 3 | RNVC: 2

1 Jan 1962

4940-00-969-0531
Sieve Bottom

009690531
TYPEV8MESH: RNCC: 3 | RNVC: 2
V8MESH: RNCC: 3 | RNVC: 2

1 Jan 1962

4940-00-969-0532
Sieve Bottom

009690532
TYPEV4MESH: RNCC: 3 | RNVC: 2
V4MESH: RNCC: 5 | RNVC: 9

1 Jan 1962

4940-00-969-0231
Rotary Sliding Vane

009690231
00B2L56-42: RNCC: 3 | RNVC: 2
00B2L56-42: RNCC: 5 | RNVC: 9

1 Jan 1962

4940-00-968-9601
Rod Wiper

009689601
AF7-4-1-3-4: RNCC: 3 | RNVC: 2

25 Sep 1966

4940-00-967-4913
Guide

009674913
81BDR1: RNCC: 3 | RNVC: 2

1 Jan 1962

4940-00-967-4909
Needle Guide

009674909
24-7: RNCC: 3 | RNVC: 9

1 Jan 1962

4940-00-967-4910
Needle Guide

009674910
24-7D: RNCC: 3 | RNVC: 9

1 Jan 1962

4940-00-967-4906
Cutoff Tool

009674906
104042-2-21: RNCC: 3 | RNVC: 9

1 Jan 1962

4940-00-967-4912
Lower Blade B Guide

009674912
81BDR2: RNCC: 3 | RNVC: 2

1 Jan 1962

4940-00-967-4911
Blade Block Guide

009674911
81BDS2: RNCC: 3 | RNVC: 2
81-BD2: RNCC: C | RNVC: 1

1 Jan 1962

4940-00-967-4905
Knockout Tool

009674905
104042-2-20: RNCC: 3 | RNVC: 9

1 Jan 1962

4940-00-967-4892
Channel Knife

009674892
27-5E: RNCC: 3 | RNVC: 9

1 Jan 1962

4940-00-965-5454
Cutter Blade

009655454
5125-2: RNCC: 3 | RNVC: 2

1 Jun 1966

4940-00-959-5796
Spline Arbor

009595796
369A9965: RNCC: 3 | RNVC: 2
369A9965: RNCC: 5 | RNVC: 9

25 May 1966

4940-00-957-3590
Pressure Test Valve

009573590
6914TYPECVALVE: RNCC: 3 | RNVC: 9

1 Jan 1963

4940-00-956-6312
Heat Gun Attachment

009566312
TG-24-RFL-LGE-BOOT: RNCC: 3 | RNVC: 2
TG24: RNCC: 5 | RNVC: 9

11 May 1966

4940-00-956-6303
Solder Sl Reflector

009566303
TG-13/A-170-HG-RFL-LARGE: RNCC: 3 | RNVC: 2
TG13: RNCC: 5 | RNVC: 9

11 May 1966

4940-00-955-2371
Gun Assembly

009552371
50-420202ABGF: RNCC: 3 | RNVC: 2
5469086G2: RNCC: 3 | RNVC: 2
50-420202ABGF: RNCC: 3 | RNVC: 2
5469089G1: RNCC: 5 | RNVC: 2
50-420202ABGF: RNCC: 5 | RNVC: 2
5469086G2: RNCC: 5 | RNVC: 2
H: RNCC: 5 | RNVC: 2
5469086G1: RNCC: 5 | RNVC: 2
5469086G2: RNCC: 5 | RNVC: 2
50-420202ABGF1: RNCC: 5 | RNVC: 2

1 Jan 1962

4940-00-954-6516
Asbe Laminated Tape

009546516
JETTECTYPEA: RNCC: 3 | RNVC: 9
JETTECA: RNCC: 5 | RNVC: 9

6 May 1966

4940-00-952-4164
Pressure Sealing Fitting

009524164
6489: RNCC: 3 | RNVC: 9

1 Jan 1962

4940-00-948-3810
Electric Pump Assy

009483810
918708: RNCC: 3 | RNVC: 2

1 Apr 1966

4940-00-948-3770
Coil Spreader

009483770
3144209: RNCC: 3 | RNVC: 2
3144209: RNCC: 5 | RNVC: 9
3144209: RNCC: 5 | RNVC: 9

1 Apr 1966

4940-00-948-3359
Valve Facing Tool

009483359
SS845-1889528REVDPC47: RNCC: 3 | RNVC: 2
2620-921X2PC47: RNCC: 3 | RNVC: 9
2620-921X2PC47: RNCC: 5 | RNVC: 9
B0-16736: RNCC: 5 | RNVC: 9
YWVT551AX80-375XXXX: RNCC: 5 | RNVC: 9
2620-921X2 PC 4: RNCC: C | RNVC: 1

1 Apr 1966

4940-00-948-0024
Pneumatic Coil Spreader

009480024
21065: RNCC: 3 | RNVC: 2

30 Mar 1966

4940-00-946-2195
Fixture Assembly Ho

009462195
LTCT4018: RNCC: 3 | RNVC: 2

11 Mar 1966

4940-00-943-7286
Fusible Link

009437286
573615: RNCC: 3 | RNVC: 9
K74: RNCC: 5 | RNVC: 9

2 Feb 1966

4940-00-943-3327
Test Adapter

009433327
55189-107-1: RNCC: 3 | RNVC: 2

21 Dec 1965

4940-00-936-3213
Match Inner Race Ay

009363213
F2152-167: RNCC: 3 | RNVC: 9
F2152-167: RNCC: 5 | RNVC: 9

3 Mar 1967

4940-00-928-0387
Leak Clamp Adapter

009280387
12A0379-1: RNCC: 3 | RNVC: 2
12A0379-1: RNCC: 3 | RNVC: 2

19 Aug 1966

4940-00-927-8075
Seali Tip Extension

009278075
12A0369-1: RNCC: 3 | RNVC: 2

17 Aug 1966

4940-00-927-8074
Sealant Adapter Tip

009278074
12A0368-1: RNCC: 3 | RNVC: 2

17 Aug 1966

4940-00-927-1403
Accumulator Valve

009271403
300593: RNCC: 3 | RNVC: 2
A72573-200PC1: RNCC: 5 | RNVC: 2
1110-2600: RNCC: 5 | RNVC: 9
1110-201: RNCC: 5 | RNVC: 9
300593 SCHRADER: RNCC: C | RNVC: 1

10 Aug 1966

4940-00-926-3658
Air Blow Gun

009263658
57S: RNCC: 3 | RNVC: 2

23 Mar 1967

4940-00-925-7806
Lower Coupling Stop

009257806
413574-1: RNCC: 3 | RNVC: 2

24 Jan 1966

4940-00-925-7804
Shaft Positioner

009257804
508626-1R: RNCC: 3 | RNVC: 2

24 Jan 1966

4940-00-925-7803
Shaft Positioner

009257803
508626-1L: RNCC: 3 | RNVC: 2

24 Jan 1966

4940-00-923-6844
Valve Assem Control

009236844
02374: RNCC: 3 | RNVC: 9
R802: RNCC: 5 | RNVC: 9
02125: RNCC: 5 | RNVC: 9
TLR02125: RNCC: 5 | RNVC: 9
TLR0Z125: RNCC: C | RNVC: 1

20 Jan 1966

4940-00-919-2117
Signal Source Assy

009192117
500-00661: RNCC: 3 | RNVC: 9
500-00661: RNCC: 5 | RNVC: 9
500-00661: RNCC: 5 | RNVC: 9

1 Jan 1960

4940-00-917-3820
Filte Pump Assembly

009173820
434354-4: RNCC: 3 | RNVC: 2

22 Jul 1966

4940-00-917-3819
Filter Ltd Assembly

009173819
083162-1: RNCC: 3 | RNVC: 2

22 Jul 1966

4940-00-914-8427
Circuitboard Holder

009148427
795-6: RNCC: 3 | RNVC: 9
901A219-1: RNCC: 5 | RNVC: 2
1127AS158: RNCC: 5 | RNVC: 2
02608-1: RNCC: 5 | RNVC: 2
901A219-1: RNCC: 5 | RNVC: 2
11066467: RNCC: 5 | RNVC: 2
888997-5250: RNCC: 5 | RNVC: 9
71-1: RNCC: 5 | RNVC: 9
311-1: RNCC: 5 | RNVC: 9
888997-5250: RNCC: C | RNVC: 1

1 Jul 1966

4940-00-912-4054
Test Adapter

009124054
9219568: RNCC: 3 | RNVC: 2

1 Jan 1960

4940-00-911-3114
Pump Shaft Seal

009113114
433682-1: RNCC: 3 | RNVC: 2
433682-1REVB: RNCC: C | RNVC: 1

1 Jan 1960

4940-00-910-8268
Gun Head Assy

009108268
243051: RNCC: 3 | RNVC: 2

1 Jan 1960

4940-00-910-3529
Bench Safety Parts Cleaning Can

009103529
1426E AND 1416-36: RNCC: 3 | RNVC: 2
1416E: RNCC: 5 | RNVC: 9
1416: RNCC: 5 | RNVC: 9

6 Jul 1966

4940-00-910-1067
Chassis Fixture

009101067
B: RNCC: 3 | RNVC: 9
303A1100: RNCC: 5 | RNVC: 9
41BREVA: RNCC: 5 | RNVC: 9
B: RNCC: 5 | RNVC: 9

1 Jan 1960

4940-00-908-4301
Cabinet Insert

009084301
411732-5: RNCC: 3 | RNVC: 2

1 Jan 1960

4940-00-908-4300
Cabinet Insert

009084300
411732-3: RNCC: 3 | RNVC: 2

1 Jan 1960

4940-00-908-4298
Cabinet Insert

009084298
411732-1: RNCC: 3 | RNVC: 2

1 Jan 1960

4940-00-908-4286
Blast Cabinet Plate

009084286
411731-1: RNCC: 3 | RNVC: 2

1 Jan 1960

4940-00-908-4283
Blast Cabinet Plate

009084283
411731-5: RNCC: 3 | RNVC: 2

1 Jan 1960

4940-00-907-5985
Pump Kit

009075985
3430-9: RNCC: 3 | RNVC: 2
59001: RNCC: 5 | RNVC: 9

1 Jan 1960

4940-00-907-5983
Piston Guide

009075983
1440-4: RNCC: 3 | RNVC: 2

1 Jan 1960

4940-00-906-2366
Gunjet

009062366
641519: RNCC: 3 | RNVC: 9

1 Jan 1960

4940-00-906-0612
Blast Cleaning Cabinet

009060612
610918-1: RNCC: 3 | RNVC: 2
610918-1: RNCC: 5 | RNVC: 2

1 Jan 1960

4940-00-896-9713
Pole

008969713
SK30624: RNCC: 3 | RNVC: 9

1 Jan 1962

4940-00-894-7124
Reseating Tool

008947124
EE95-21-38: RNCC: 3 | RNVC: 9

1 Jan 1962

4940-00-888-8971
Sleeve

008888971
T1059: RNCC: 3 | RNVC: 2
54-1059: RNCC: 5 | RNVC: 2

1 Jan 1962

4940-00-888-8966
Housing

008888966
T1065: RNCC: 3 | RNVC: 2
54-1065: RNCC: 5 | RNVC: 2

1 Jan 1962

4940-00-886-6216
Gage Adapter

008866216
1980839: RNCC: 3 | RNVC: 2
1980839: RNCC: 5 | RNVC: 2

1 Jan 1960

4940-00-886-6218
Adapter Gage Washer

008866218
1421901: RNCC: 3 | RNVC: 2
1421901: RNCC: 5 | RNVC: 2

1 Jan 1960

4940-00-884-8922
Element Assy

008848922
1300: RNCC: 3 | RNVC: 2

1 Jan 1963

4940-00-884-8869
Shaft

008848869
1407: RNCC: 3 | RNVC: 2

1 Jan 1962

Load More Results