4935-00-880-4513

3020-00-542-0449 3020005420449 005420449

6680-01-542-0449 6680015420449 015420449 is a thin metal strip, of various cross-sectional shapes, having graduations on one end and a handle on the opposite end. it is designed to be inserted into an engine, pump, or compressor crankcase, transmission, gearcase, fuel tank, or the like, to determine the level of the liquid. for a gage rod with an integral cap, or breather, see gage rod-cap, liquid level, and gage rod-breather, liquid level. for items designed to measure the liquid level of bulk petroleum tanks, see gage stick, petroleum.

4130-99-542-0449 4130995420449 995420449

5310-14-542-0449 5310145420449 145420449 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

Repair Shop Equipment Modification Kit 5956682RNCC: 3 | RNVC: 2 | MEDALS: Y | DAC: 1 1 Jan 1960 4935-00-880-4513