4933-15-008-9840

Documents 4933-17-052-6665 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-49/fsc-4933/it 4933-15-008-9840
Breech Bore Sight 4933150089840 150089840 4933-15-008-9840 4933150089840 150089840 is a sighting

1980 4933-15-066-2478 Breech Bore Sight (241)A017852027RNCC: 5 | RNVC: 2 | DAC: U 22 Feb 1985 4933-15-008-9840

2013 4933-15-066-2478 Breech Bore Sight (241)A017852027RNCC: 5 | RNVC: 2 | DAC: U 22 Feb 1985 4933-15-008-9840

3040-99-859-1390 3040998591390 998591390 is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. it is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. may have provision for electrically insulating the extension shaft from the other shaft.

3040-99-501-1546 3040995011546 995011546 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.