4933-12-351-1959

4933-12-355-6621 4933123556621 123556621 ZENTRIERSTUECK, JUS

2008 4933-14-464-0233 Weapon Maintenance Fixture 89411546RNCC: 5 | RNVC: 9 | DAC: 6 7 Jul 1993 4933-12-351-1959

4933-12-351-1960 4933123511960 123511960 is a device for temporarily supporting and holding weapons in the correct position during maintenance, adjustment or testing.

3120-12-350-9666 3120123509666 123509666 is a tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.

5306-12-350-9952 5306123509952 123509952 is an externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.