4933-19-003-8044

003-6365 Weapon Component Maintenance Fixture B8M.9105-0RNCC: 3 | RNVC: 2 | DAC: 3 12 Feb 2010 4933-19-003-8044

5365-22-120-2991 5365221202991 221202991 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

8430-17-120-2991 8430171202991 171202991 is footwear having safety features such as steel box toes or equivalent, nonslip heels and soles, and/or instep guards. they are used to provide protection to the feet from an impact force and to prevent injury from falls due to slippage. designed to be worn by males past the age of physical maturity. excludes shoes, conductive; shoes, electrical hazards protective; shoes, molders'; and shoes, nonsparking.

8340-99-120-2991 8340991202991 991202991 is one of the portions of a jointed tent pole which is jointed to another by ferrules or sleeves. see also pole, tent.

2815-15-120-2991 2815151202991 151202991 is a device used for connecting a piston to a crankshaft or to a master connecting rod of an internal combustion engine, steam reciprocating engine, reciprocating air compressor, or the like. the rod may be connected directly to the piston, or it may transmit the motion through a crosshead.