4930-27-024-8411
Service Station Automotive Fuel Dispensing Pump
4930270248411 270248411 M861
An item consisting of an electrically driven pump and a metering element, designed to be permanently connected by pipe to a supply source. It is normally used in service stations to refuel automobiles and trucks. View more Service Station Automotive Fuel Dispensing Pump
Managed by Turkey
NSN Created on 10 Dec 2004
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 4930-27-024-8411
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 4930-27-024-8411 5+ Documents (More...)
8412 Service Station Automotive Fuel Dispensing Pump M862RNCC: 2 | RNVC: 1 | DAC: 3 10 Dec 2004 4930-27-024-8411
3970 Service Station Automotive Fuel Dispensing Pump M311RNCC: 2 | RNVC: 1 | DAC: 3 26 Jul 2007 4930-27-024-8411
5305-14-434-8673 5305144348673 144348673 is an externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). it is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. see also bolt, externally relieved body and bolt, internal wrenching.
6230-15-219-9752 6230152199752 152199752 LAMPADA DA BANCO CO
5320-01-132-8631 5320011328631 011328631 is a metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
Restrictions 4930-27-024-8411
End Users 4930-27-024-8411
- Turkey (ZW)
Approved Sources 4930-27-024-8411
- Part Number
- Manufacturer
- Status
- M861
- Manufacturer
- T5973 - Tumaks-Ismail Erdem (Active)
- Related Standard
- Related Standard
NATO Stock Numbers Related to 4930-27-024-8411
4930-16-004-9074 4930-16-005-7642 4930-27-053-0342 4930-14-488-2971 4930-15-000-2903 4930-27-053-0343 4930-12-367-3085 4930-17-114-7729 4930-14-537-6283 4930-39-000-3047 4930-20-006-9934 4930-27-024-8412 4930-37-180-1748 4930-27-008-4230 4930-99-777-9720 4930-15-195-4509 4930-14-565-1072 4320-22-307-0521