4930-14-399-1947

Supply Items Approved for CAGE F0589 Page 1 of 1 4930-14-399-1947 Hand Lubricating Gun 882RNCC: 5 | RNVC

Jul 2001 4930-12-198-3021 Hand Lubricating Gun 45-0982RNCC: 3 | RNVC: 2 | DAC: 3 13 Jan 1984 4930-21-882
Feb 2011 4930-14-447-3412 Hand Lubricating Gun 0172400RNCC: 5 | RNVC: 9 | DAC: 4 15 May 1991 4930-14-399-1947

CAGE SJWM4 Plantation Workers Service Center in Hatton, Sri Lanka

5306-01-127-3747 5306011273747 011273747 is a high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.

5306-01-205-3405 5306012053405 012053405 is an externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is not designed to be held or driven with an inserted drivers. a locking feature may be incorporated in the design of the head or threads. for items with a thread diameter smaller than no. 10 (0.190 in.) (5 mm) and those items with an inserted drive head, use screw, shoulder. for items which are no. 10 (0.190 in.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use bolt, externally relieved body. excludes thumbscrew.