4930-12-171-9232

5325-00-792-0855 5325007920855 007920855 is a pinlike item designed to turn within and be held in place by an eyelet, turnlock fastener; ring, retaining; or the surface of the item it fastens. it is provided with either a cam slot, cam lead threads, or a hold for accommodating a pin. securing is accomplished by mating with a lockspring, turnlock fastener or receptacle, turnlock fastener. it has either provisions to accommodate a knob or extension or has a head which has provisions to facilitate turning.

CAGE 00VZ3 Drake Robert P Dba B B D Fulfillment in Big Flats, NY United States

5365-34-038-4294 5365340384294 340384294 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

3120-00-420-5792 3120004205792 004205792 is a tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. the overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. for items made of rubber, see bushing, nonmetallic. see also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. excludes bushing, drill, jig.

CAGE Z05N0 Rmit University City Campus in Melbourne, Vic Australia