4930-66-138-9932

( More... ) https//www.nsnlookup.com /cage Brp Australia Pty Ltd (CAGE Code Z0531) Apr 1974 4930-66-138-9932

: 9 19 Jan 1983 2910-66-069-5507 Valve Seat Assy 379313RNCC: 3 | RNVC: 2 | DAC: 6 6 Apr 1974 4930-66-138-9932

May 2009 4930-12-381-5011 Hand Lubricating Gun 083561RNCC: 3 | RNVC: 2 | DAC: 3 24 Feb 2010 4930-66-138-9932

3040-01-539-5120 3040015395120 015395120 is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. it is not designed for use in aliging by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items not having the above conditions see pin, straight, headless. for items used to transmit motion see shaft, straight. for items having machined ends which constitute steps see axle(1), sholdered. excludes shaft(1), shouldered; and bolt, fluid passage.

5365-00-826-1496 5365008261496 008261496 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.