4920-00-956-6528

Documents 6630-12-338-6739 3+ Documents ( More... ) https//www.nsnlookup.com /fsg-49/fsc-4920/us 4920-00-956-6528
Aircraft Maintenance Alignment Jig 009566528 , eye; coupler (as modified); and hasp, hinged. https

1285-12-165-6739 1285121656739 121656739 is two or more independent amplifiers having a common mounting or mounted on each other.

1710-12-044-6739 1710120446739 120446739

1615-12-028-6739 1615120286739 120286739

5310-12-130-6739 5310121306739 121306739 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.