Premium Information is available for this item - Upgrade for $1 a day
4920-00-570-7394
Aircraft Engine Maintenance Machining Fixture
4920005707394 005707394 PWA10182
A fixture designed to hold aircraft engine or auxiliary power unit individual parts, subassemblies, or assemblies in position for machining to design tolerances during modification or repair. View more Aircraft Engine Maintenance Machining Fixture
May 2023
4
Marketplace 4920-00-570-7394
Request a Quotation from participating marketplace vendors
Related Documents 4920-00-570-7394 1+ Documents (More...)
-00-570-7394 RQST NE Updated Every Day 4920-00-570-7394 RQST Updated Every Day 4920-00-570-7394 RQST
1 EA NS Request Quotation Updated Every Day 4920 -00-570-7394 RQST NE Updated Every Day 4920-00-570-
Restrictions 4920-00-570-7394
IUID Required
4920-00-570-7394 is a Aircraft Engine Maintenance Machining Fixture that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 4920-00-570-7394
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 4920-00-570-7394
- US Air Force (FGG4)
- Effective Date:
- 1 Sep 2000
- Former MOE Rule:
- FEE4
Approved Sources 4920-00-570-7394
- Part Number
- Manufacturer
- Status
- PWA10182
- Manufacturer
- 77445 - Rtx Corporation (Active)
- Primary Buy
- Primary Buy
Datasheet 4920-00-570-7394
- Characteristic
- Specifications
- FIIG
- Specifications
- A505C0
- Functional Description [FTLD]
- Mounts And Locates Accessory Drive Shaft And Gear For Machining Or Assembly
- Nominal Overall Length [CWFR]
- 9.000 Inches
- Nominal Overall Width [CXRQ]
- 8.000 Inches
- Nominal Overall Height [CYAG]
- 1.625 Inches
- Special Features [FEAT]
- Company Assigned Name:Holder, Accessory Drive Shaft Gear; Includes Base,Clamps, Locator And Block
- End Item Identification [AGAV]
- J73,75 And 79
Management Data 4920-00-570-7394
Air Force
- Budget:
- A
- 57X3010 - Common Aircraft Ground Support Equipment
- Aggregation Code:
- RN
- GROUND SUPPORT EQUIPMENT (FSC RESIDUAL MMAC)
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - U
- Reparable. Condemn at Intermediate. AF Equipment Management System (AFEMS).
Similar Supply Items to 4920-00-570-7394
Freight Information 4920-00-570-7394
4920-00-570-7394 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 186630. A Sub NMFC of X. It has a NMFC Description of TOOLS:NOI O/T PLSTC IN BBLS/BXS. 4920-00-570-7394 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. 4920-00-570-7394 is rated as class 100 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 91810 which rates the freight between FCL and LCL. 4920-00-570-7394 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 652 for ocean manifesting and military sealift. 4920-00-570-7394 is not classified as a special type of cargo when transported by water. 4920-00-570-7394 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 4920-00-570-7394
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-16173, Grade 2, Corrosion Preventive, Solvent Cutback, Cold Application, Soft Film
- MIL-PRF-121, Greaseproof, Waterproof Barrier
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
- --
- MIL-PRF-121, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- No Requirement