Aircraft Maintenance and Repair Shop Specialized Equipment - United States (US)

Federal Supply Class (FSC): 4920

Federal Supply Group (FSG): 49 Maintenance and Repair Shop Equipment

NATO Supply Classification Class (NSC): 4920

NATO Supply Classification Group (NSG): 49 Maintenance and Repair Shop Equipment

Items Managed by United States (US)

FSC 4920 Aircraft Maintenance and Repair Shop Specialized Equipment - United States (US)

Includes Maintenance stands designed for support of aircraft assemblies during repair or overhaul; Test Stands and Test Equipment specially designed for maintenance and repair of aircraft components such as: engines, generators, hydraulic systems, armament, automatic pilot, fire control, flight control, and navigational systems.

Excludes Hand Tools; Airfield Maintenance Platforms; Basic types of electrical and electronic test instruments, including those specially designed, such as ammeters, voltmeters ohmmeters, multimeters, and similar instruments, as shown in the indexes to the FSC; Test Apparatus used for both communications and other electrical and electronic equipment.

Note-Specialized equipment which is designed for automotive maintenance and repair, and which is also used for the maintenance and repair of nonautomotive vehicles or equipment, will be classified in Class 4910. Jigs, fixtures, and templates used in conjunction with maintenance and repair shop specialized equipment are classified in this group. However, jigs, fixtures, and templates used in conjunction with metalworking machinery are classified in Group 34. Infrared assemblies, subassemblies, and components specifically designed as test and maintenance specialized equipment are classified in the appropriate classes of this group. Excluded from this group is infrared equipment designed for testing communications and night vision equipment.

Frequently Asked Questions (FAQ) for Federal Supply Class 4920

What is Federal Supply Class 4920?: FSC 4920 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4920) in the USA for supply items codified in the category of Aircraft Maintenance and Repair Shop Specialized Equipment.
What is NATO Supply Classification Class 4920?: NSC 4920 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4920 in the USA) for supply items codified in the category of Aircraft Maintenance and Repair Shop Specialized Equipment.
Which Federal Supply Group is FSC 4920 in?: FSC 4920 is in Federal Supply Group (FSG) 49 which contains Maintenance and Repair Shop Equipment.
Which NATO Supply Classification Group is NSC 4920 in?: NSC 4920 is in NATO Supply Classification Group (NSG) 49 which contains Maintenance and Repair Shop Equipment.

Supply Items Included in Federal Supply Class 4920

What is a Phase Monitor? 27 Items: A Phase Monitor (MONITOR,PHASE) is an item which provides continual quantitative visual indication of cyclic variations between two or more phases of electrical energy, warning upon departure from predetermined phase variation limits. May initiate an audible warning. See also PANEL, MONITOR.
What is a Navigational Controls Simulator? 14 Items: A Navigational Controls Simulator (SIMULATOR,NAVIGATIONAL CONTROLS) is an item whose electrical output provides synthetic signals similar to those produced by navigational controls.
What is a Computer Calibrator? 10 Items: A Computer Calibrator (CALIBRATOR,COMPUTER) is an item specifically designed to determine by comparison the correct values of a computer.
What is an Automatic Pilot Test Set? 35 Items: An Automatic Pilot Test Set (TEST SET,AUTOMATIC PILOT) is a test set primarily designed for use in making examinations of automatic pilots and their components.
What is a Fire Control System Test Set? 75 Items: A Fire Control System Test Set (TEST SET,FIRE CONTROL SYSTEM) is a test set primarily designed for use in making examinations of a fire control system. Excludes TEST SET, BOMB DIRECTOR.
What is a Flight Control System Test Set? 260 Items: A Flight Control System Test Set (TEST SET,FLIGHT CONTROL SYSTEM) is a test set primarily designed for use in making examinations of a flight control system.
What is an Indicator Test Set? 180 Items: An Indicator Test Set (TEST SET,INDICATOR) is a test set specifically designed for use in making examinations of indicators.
What is a Synchro Test Set? 32 Items: A Synchro Test Set (TEST SET,SYNCHRO) is a test set primarily designed for use in making examinations of the operation of synchros, such as measuring the accuracy of angular motion. See also TRANSFORMER, SYNCHRO OVERLOAD.
What is a Starter Torque Tester? 12 Items: A Starter Torque Tester (TESTER,STARTER TORQUE) is a device designed to measure and indicate the torque developed by an engine starter.
What is a Cylinder Compression Tester? 14 Items: A Cylinder Compression Tester (TESTER,CYLINDER COMPRESSION) is a device designed for testing the compression of engine cylinders.
What is a Test Adapter? 2707 Items: A Test Adapter (ADAPTER,TEST) is an adapter which provides facilities for electrically connecting an item to be tested and a piece of test equipment. Do not use for interconnecting cables. Includes plug-in electronic component socket adapters which provide terminations for dynamic testing while an electronic component is inserted. See also COUPLER, TEST SET.
What is an Aircraft Engine Maintenance Stand? 244 Items: An Aircraft Engine Maintenance Stand (STAND,MAINTENANCE,AIRCRAFT ENGINE) is a structure designed for overhauling, assembling, disassembling and repairing aircraft engines. See also STAND, AIRCRAFT ENGINE; TEST STAND, AIRCRAFT ENGINE and STAND, MAINTENANCE, RAIL TYPE.
What is an Aircraft Engine Accessories Maintenance Stand? 209 Items: An Aircraft Engine Accessories Maintenance Stand (STAND,MAINTENANCE,AIRCRAFT ENGINE ACCESSORIES) is see also STAND, MAINTENANCE, RAIL TYPE.
What is an Aircraft Power Unit Maintenance Stand? 17 Items: An Aircraft Power Unit Maintenance Stand (STAND,MAINTENANCE,AIRCRAFT POWER UNIT) is see also STAND, MAINTENANCE, RAIL TYPE.
What is an Ignition Magneto Test Stand? 15 Items: An Ignition Magneto Test Stand (TEST STAND,IGNITION MAGNETO) is a device designed for testing the electrical output and operating characteristics of a MAGNETO, IGNITION.
What is an Aircraft Generator Test Stand? 33 Items: An Aircraft Generator Test Stand (TEST STAND,AIRCRAFT GENERATOR) is a device designed to test the performance and operational characteristics of aircraft generators.
What is an Aircraft Engine Test Stand? 85 Items: An Aircraft Engine Test Stand (TEST STAND,AIRCRAFT ENGINE) is a device designed to test the performance and/or operational characteristics of aircraft engines. For mobile items, see TEST STAND, ENGINE, SEMITRAILER MOUNTED. See also STAND, AIRCRAFT ENGINE; and STAND, MAINTENANCE, AIRCRAFT ENGINE.
CASE,TEST SET 236 Items
What is an Interconnecting Box? 101 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Aircraft Pressurized Cabin Leakage Tester? 42 Items: An Aircraft Pressurized Cabin Leakage Tester (TESTER,PRESSURIZED CABIN LEAKAGE,AIRCRAFT) is a unit designed for testing, on the ground, the volume of air leakage from aircraft pressurized cabins.
What is a Rotary Electro-Mechanical Actuator? 36 Items: A Rotary Electro-Mechanical Actuator (ACTUATOR,ELECTRO-MECHANICAL,ROTARY) is a self-contained power transmitting device designed to convert electrical energy into controlled mechanical force, in the form of torque (rotational mechanical movement). Comprised of an electric motor(s), gear box(es), limit switch(es), and such accessories as required for the specific moving and positioning of other components. Excludes hydraulic and pneumatic cylinders and screwjacks.
What is a Hydraulic System Components Test Stand? 278 Items: A Hydraulic System Components Test Stand (TEST STAND,HYDRAULIC SYSTEM COMPONENTS) is a cabinetlike item usually with a front work area and consisting of the necessary instrumentation, integral hydraulic system and component mounting facilities. Designed to provide the hydraulic pressure for testing and/or calibrating hydraulic system components, such as valves, actuating cylinders, pressure regulators, accumulators, hose lines, hand and/or engine driven pumps and the like. May include facilities for filling and checking hydraulic systems for leakage and performance. See also PUMPING UNIT, HYDRAULIC.
What is an Electrical Test And Maintenance Table? 19 Items: An Electrical Test And Maintenance Table (TABLE,ELECTRICAL TEST AND MAINTENANCE) is a table designed for general use in the testing of electrical circuits in the maintenance of instruments and appliances operated by electricity.
What is an Engine Analyzer Set? 14 Items: An Engine Analyzer Set (ANALYZER SET,ENGINE) is a complete multiple test unit designed for use in the testing of exhaust, ignition, voltage, revolutions per minute, etc., of a gasoline or diesel engine. Excludes ANALYZER, IGNITION AND VIBRATION, RECIPROCATING ENGINE.
What is a Power Distribution-Reference Signal Group? 33 Items: A Power Distribution-Reference Signal Group is a collection of items, with the dual function of distributing electrical power to other components, and of providing signals which are used as a reference in time, amplitude, frequency, and the like.
What is a Pitot And Static Systems Tester? 101 Items: A Pitot And Static Systems Tester (TESTER,PITOT AND STATIC SYSTEMS) is a device designed to check the pitot and static systems of aircraft, guided missiles, rockets or the like for leaks. It may also be used to calibrate air speed indicators, altimeters, rate of climb indicators and machmeters.
What is a Radar Target Simulator? 11 Items: A Radar Target Simulator (SIMULATOR,RADAR TARGET) is an item whose reflection properties are similar to those of a radar target. It is designed for fixed position installation so that its range and azimuth, with respect to the equipment with which it is used is known. It is normally used for the calibration of a radar set. See also TARGET, RADAR.
TABLE,TILTING,GYRO INSTRUMENT TESTING 58 Items
What is a Run-In Dynamometer? 12 Items: A Run-In Dynamometer (DYNAMOMETER,RUN-IN) is a mechanical device used for running-in new and rebuilt internal combustion engines under load prior to their applicable installation by simulating actual load conditions and applying them to the engines. It employs a closed hydraulic turbine torque absorption system, and includes a tachometer, intake manifold vacuum gage, temperature gage, and indicator plate for valve operation. Excludes DYNAMOMETER, VEHICLE CHASSIS, SINGLE DRIVE.
What is an Exhaust Gas Temperature Circuit Tester? 11 Items: An Exhaust Gas Temperature Circuit Tester (TESTER,EXHAUST GAS TEMPERATURE CIRCUIT) is a unit primarily designed for examining the exhaust gas temperature circuit of a jet aircraft for error. It induces artifical heat to simulate engine operating temperatures. It may also be used to perform tests on aircraft thermoswitches and/or exhaust gas temperature indicators.
What is a Demand Oxygen Regulator Test Stand? 35 Items: A Demand Oxygen Regulator Test Stand (TEST STAND,DEMAND OXYGEN REGULATOR) is an apparatus designed to test demand type oxygen regulators for flow capacities, oxygen concentration and pressure characteristics at the desired altitudes.
What is a Semitrailer Mounted Engine Test Stand? 20 Items: A Semitrailer Mounted Engine Test Stand (TEST STAND,ENGINE,SEMITRAILER MOUNTED) is a mobile unit usually equipped with a control booth, instrumentation, engine controls, auxiliary power unit, fuel, oil, electrical systems, and the like, primarily designed for testing aircraft engine.
What is a Multiposition Maintenance Fixture Holder? 179 Items: A Multiposition Maintenance Fixture Holder (HOLDER,MAINTENANCE FIXTURE,MULTIPOSITION) is a device having a stationary or adjustable base with movable arm(s) for affixing maintenance fixtures to hold items in convenient working positions. It is commonly used for benchwork and may be free standing. For items which include maintenance fixtures, see MAINTENANCE FIXTURE (as modified).
What is a Hydraulic Accumulator? 16 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Rail Type Maintenance Stand? 33 Items: A Rail Type Maintenance Stand (STAND,MAINTENANCE,RAIL TYPE) is an item consisting of a pair of horizontal parallel rails or tracks mounted on telescoping legs with adjustable foot assemblies and rail coupling devices. Designed for supporting engine cradles, missile component cradles, and the like, during maintenance operations and transferring of the cradles from one rail type transporting and/or storage vehicle to the other. Excludes rail type maintenance stands having attached cradles or additional equipment designed for specific items.
What is a Test Stand Level? 10 Items: A Test Stand Level (LEVEL,TEST STAND) is a device which utilizes a VIAL, LEVEL. It is used for leveling, adjusting and setting angles for test stand of which it is a component part.
What is a Programming Patching Panel? 25 Items: A Programming Patching Panel (PANEL,PATCHING,PROGRAMMING) is a panel consisting of s single flat-surfaced item which contains contact springs, jacks, sockets, and the like, and is encased in a frame assembly. It is used for connecting to the internal wiring of the electronic equipmetnt in use. It may be designed to accept either nonremovable or interchangeable patchboards that can be programmed with patchords to create the circuit required for a given operation. Excludes PANEL, PATCHING, ANTENNA; PANEL, PATCHING, COMMUNICATION; and SWITCHBOARD, PATCHING, COMMUNICATION. See alos PATCHBAORD, ELECTRICAL.
What is a Weapon Boresighting Equipment? 46 Items: A Weapon Boresighting Equipment (BORESIGHTING EQUIPMENT,WEAPON) is an item consisting of a combination of various devices designed to bring the bore axis into parallel alignment with the line of sight of the aiming system. It may include a target sighting disk.
What is a Mechanical Equipment Seal Replacement Parts Kit? 13 Items: A Mechanical Equipment Seal Replacement Parts Kit (PARTS KIT,SEAL REPLACEMENT,MECHANICAL EQUIPMENT) is a parts kit consisting of numerous items. The kit may contain seals, gaskets, packing, and/or retainers for repairing mechanical equipment. Excludes kits including tools, collars, pins, sleeves and associated hardware. Excluds PARTS KIT (1), SEAL REPLACEMENT, ARTILLERY.
What is a Data Entry Keyboard? 43 Items: A Data Entry Keyboard (KEYBOARD,DATA ENTRY) is a device for data input by key depression which causes the generation of the selected character, numeral or the like.
What is a Helicopter Rotor Head Balance And Blade Track Run Test Equipment? 25 Items: A Helicopter Rotor Head Balance And Blade Track Run Test Equipment (TEST EQUIPMENT,HELICOPTER ROTOR HEAD BALANCE AND BLADE TRACK RUN) is a group of items such as balancers, tracker blade strobex, beam indicator scales, magnetic pick-ups, mechanical accelerometers, patch targets, cables and other accessories for testing the rotor head balance and the rotor blade track run of a helicopter. It does not contain spare replacements.
What is a Plasma Spray Mask? 420 Items: A Plasma Spray Mask (MASK,PLASMA SPRAY) is a item usually metallic with an open pattern, mounted on a part(s) to cover selected areas during a metal coating (deposition) process. The item may have attaching hardware consisting of a base assembly, knob, spring, clamp, plate, and the like.
What is an Aircraft Maintenance Fixture? 8165 Items: An Aircraft Maintenance Fixture (FIXTURE,AIRCRAFT MAINTENANCE) is a fixture designed to hold/position aircraft components to facilitate inspection, repair, testing and/or replacement of components. D0 not use if a more specific name applies. See FIXTURE (1) (as modified).
What is a Test Adapter Kit? 497 Items: A Test Adapter Kit (ADAPTER KIT,TEST) is an adapter kit containing items such as adapters, cables, power supply, switching units, and auxiliary test means. Cases and special tools may be included. It is used to adapt items to the standard interface of a piece of test equipment.
What is a Test Program Set? 1289 Items: A Test Program Set is a collection of items consisting of electrical/electronic and other specialized equipment used for inspection, fault isolation, maintenance and/or repair and any other evaluations of the components and/or equipment. May include cables, fixtures, interface test adapter, software and operational instructions.
What is an Aircraft Maintenance Kit? 793 Items: An Aircraft Maintenance Kit (MAINTENANCE KIT,AIRCRAFT) is a maintenance kit for components of airplanes, helicopters, and the like.
What is an Electrical-Electronic Test And Measuring Equipment Case? 143 Items: An Electrical-Electronic Test And Measuring Equipment Case (CASE,ELECTRICAL-ELECTRONIC TEST AND MEASURING EQUIPMENT) is a case specifically designed for electrical-electronic test and measuring equipment. It may be designed to protect against shock and vibration.
What is an Aircraft Maintenance Fixture Set? 250 Items: An Aircraft Maintenance Fixture Set (FIXTURE SET,AIRCRAFT MAINTENANCE) is a group of two or more FIXTURE (1), AIRCRAFT MAINTENANCE. It may also include attachment hardware, gaskets, valves and fittings.
What is a Maintenance Support Station? 21 Items: A Maintenance Support Station is a group of items used to reprogram all reprogrammable devices within a computer controlled aircraft system. It is capable of interfacing with other related systems, reprogramming software and developing and updating software tools required to maintain the system. It houses the equipment required to process software changes such as interface units, instruction manuals, stimuli cabinets containing one or more independent computer systems, and computer programs for processing environmental changes. It also contains line replaceable units representing a mock-up of the unit being sustained.
What is a Stores Management System Test Set? 174 Items: A Stores Management System Test Set (TEST SET,STORES MANAGEMENT SYSTEM) is a test set specifically designed for testing and fault isolation of a stores management system (SMS) WHICH PROVIDES THE PILOT AND NAVIGATOR OF AN AIRCRAFT WITH WEAPON STORES STATUS AND A MICROPROCESSOR-PROGRAMMED CONTROL OVER THE OPERATION AND SAFETY-CRITICAL RELEASE OF ALL AIRCRAFT STORES.
What is a Maintenance Aircraft Repair Kit? 263 Items: A Maintenance Aircraft Repair Kit (REPAIR KIT,AIRCRAFT,MAINTENANCE) is a group of tools and parts used for equipment maintenance or repair. May provide replacement parts to facilitate such functions as inspection, test and repair, for the specific purpose of restoring and/or improving operational status of a component or equipment.
What is an Aircraft Engine Test Set? 210 Items: An Aircraft Engine Test Set (TEST SET,AIRCRAFT ENGINE) is a test set primarily designed for use in making examinations of the performance and/or characteristics of aircraft engines.
What is a Countermeasures Set Test Set? 84 Items: A Countermeasures Set Test Set (TEST SET,COUNTERMEASURES SET) is a test set primarily designed for use in making examinations of a countermeasures set. Excludes TEST SET, COUNTERMEASURES DISPENSING SET.
What is a Countermeasures Test Set Group? 17 Items: A Countermeasures Test Set Group (TEST SET GROUP,COUNTERMEASURES) is a group that provides facilities for testing countermeasures.
What is an Aircraft Pneumatic System Components Test Station? 57 Items: An Aircraft Pneumatic System Components Test Station (TEST STATION,PNEUMATIC SYSTEM COMPONENTS,AIRCRAFT) is a group of items containing a console and peripheral equipment specifically designed for use in testing pneumatic components of aircraft such as valves, controls, and pressure regulators. May also supply fuel, condition air, and provide a mechanical loading system along with appropriate instrumentation and data acquisition/control logic for testing. See also TEST SET, PNEUMATIC SYSTEM COMPONENTS.
What is a Hydraulic System Components Test Stand Adapter Kit? 40 Items: A Hydraulic System Components Test Stand Adapter Kit (ADAPTER KIT,HYDRAULIC SYSTEM COMPONENTS TEST STAND) is an adapter kit containing items such as adapters and connecting hardware. It is used to connect hydraulic system components to a TEST STAND, HYDRAULIC SYSTEM COMPONENTS. See also ADAPTER SET, HYDRAULIC SYSTEM COMPONENTS TEST STAND.
What is a Hydraulic System Components Test Stand Adapter Set? 35 Items: A Hydraulic System Components Test Stand Adapter Set (ADAPTER SET,HYDRAULIC SYSTEM COMPONENTS TEST STAND) is a collection of various types and sizes of adapters used to connect aircraft hydraulic components to a TEST STAND, HYDRAULIC SYSTEM COMPONENTS. May include a display rack, container, or the like, for ease in selecting and storing the adapters. Excludes ADAPTER SET, TEST. See also ADAPTER KIT (1), HYDRAULIC SYSTEM COMPONENTS TEST STAND.
What is an Electrical-Electronic Equipment Test Station? 316 Items: An Electrical-Electronic Equipment Test Station (TEST STATION,ELECTRICAL-ELECTRONIC EQUIPMENT) is a group of items including a console and peripheral equipment specifically designed for use in testing electrical-electronic equipment. May include self-test capabilities. See TEST STATION, GUIDED MISSILE; FAULT LOCATOR (as modified)
What is a Computer Test Set Adapter Group? 44 Items: A Computer Test Set Adapter Group (ADAPTER GROUP,COMPUTER TEST SET) is a group of items composed of the necessary test card assemblies, extender assemblies, cables, plugs and the like to be used as an interface between the computer test set and item under test.
What is a Stores Management Subsystem Test Set? 37 Items: A Stores Management Subsystem Test Set (TEST SET,STORES MANAGEMENT SUBSYSTEM) is an item specifically designed for providing the necessary shop testing of the stores release equipment of an aircraft, such as air-to-ground pylons, launchers, adapters and bomb racks. Differs from TEST SET, STORES MANAGEMENT SYSTEM, in that it does not test the entire system, but the shop replaceable subsystems of the stores management system.
What is a Test Control Panel? 158 Items: A Test Control Panel (CONTROL PANEL,TEST) is a panel that is specifically designed to control the actions of and is an integral part of a test set or a test station. Excludes PANEL, TEST, ELECTRICAL; PANEL, POWER DISTRIBUTION; PANEL, INDICATOR; and PANEL BLANK.
What is a Maintenance And Repair Shop Equipment Modification Kit? 54 Items: A Maintenance And Repair Shop Equipment Modification Kit (MODIFICATION KIT,MAINTENANCE AND REPAIR SHOP EQUIPMENT) is an item or items employed to modify specially designed maintenance or repair shop equipments.
What is an Aircraft Radar Test Station? 54 Items: An Aircraft Radar Test Station (TEST STATION,RADAR,AIRCRAFT) is a group of electrical and/or electronic general purpose test equipment, primarily designed for use in making examinations of radar equipment. A controlled environment is required. See also, SIMULATOR (1), RADAR TARGET and SIMULATOR (1) , RADAR TEST EQUIPMENT.
What is an Electro-Optical System Components Test Stand? 31 Items: An Electro-Optical System Components Test Stand (TEST STAND,ELECTRO-OPTICAL SYSTEM COMPONENTS) is an item containing the necessary instrumentation and mounting facilities for testing and/or calibrating electro-optical components such as those in targeting and navigation systems.
What is a Fuel Control System Components Test Station? 109 Items: A Fuel Control System Components Test Station (TEST STATION,FUEL CONTROL SYSTEM COMPONENTS) is a group of items containing a console and/or perpheral equipment specifically designed to provide appropriate instrumentation and data acquisition/control logic for testing of components of an aircraft fuel system.
What is a Gyro Test Station? 32 Items: A Gyro Test Station (TEST STATION,GYRO) is a group of items containing a console(s) and/or peripheral equipment specifically designed to provide appropriate instrumentation and data acquisition/control logic for testing gyro's and/or components.
What is an Aircraft Environmental Control System Test Set? 66 Items: An Aircraft Environmental Control System Test Set (TEST SET,ENVIRONMENTAL CONTROL SYSTEM,AIRCRAFT) is a test set designed to make examinations of environmental control systems such as air conditioning, heating, pressurization, and the like, which affect the interior of an aircraft.
What is an Aircraft Noise Suppressor System? 16 Items: An Aircraft Noise Suppressor System (NOISE SUPPRESSOR SYSTEM,AIRCRAFT) is an enclosed cell designed to suppress noise during the trim/power testing of aircraft engines.
What is an Aircraft Engine Maintenance Heater? 131 Items: An Aircraft Engine Maintenance Heater (HEATER,AIRCRAFT ENGINE MAINTENANCE) is a specifically designed heating device used to heat engine components such as turbines, flanges, bearings, seals and the like, during maintenance/assembly. Usually has external/remote controls and an external power source.
TEST SET SUBASSEMBLY,AIRCRAFT COMPONENTS 416 Items
What is a Radio Frequency Test Station? 27 Items: A Radio Frequency Test Station (TEST STATION,RADIO FREQUENCY) is a test station containing a console and peripheral equipment specifically designed to perform fault isolation and functional/operational testing of radio frequency system(s) for aircraft. Excludes TEST STATION, ELECTRICAL-ELECTRONIC EQUIPMENT.
What is an Aircraft Maintenance Rigging Kit? 111 Items: An Aircraft Maintenance Rigging Kit (RIGGING KIT,AIRCRAFT MAINTENANCE) is a collection of items such as pins, brackets, support cables, measuring devices, and the like used to secure components in place while maintenance, inspection, removal and/or installation is being performed on adjoining components. Not normally used in servicing functions. May include carring/storage case. Excludes MAINTENANCE KIT (1), AIRCRAFT.
What is an Aircraft Control Rigging Template? 44 Items: An Aircraft Control Rigging Template (TEMPLATE,CONTROL RIGGING,AIRCRAFT) is a device made of metal and/or plastic used for the aligment of controls and/or components of an aircraft control system and/or aircraft engine. It may have a graduated scale for measurement and/or holes for the insertion of rigging pins.
What is an Aircraft Engine Test Facility Bellmouth Assembly? 36 Items: An Aircraft Engine Test Facility Bellmouth Assembly (BELLMOUTH ASSEMBLY,ENGINE TEST FACILITY,AIRCRAFT) is a fabricated device, generally constructed with a flared end and a straight type body. It is designed to be mounted in front of aircraft engines during testing. It may have probes.
What is a Test Set Accessory Kit? 111 Items: A Test Set Accessory Kit (ACCESSORY KIT,TEST SET) is an accessory kit containing two or more supplemental items, such as attentuators, dummy loads, BRIDGE, IMPEDANCE, isolation transformers, and the like which are necessary to perform test and/or perform maintenance procedures on a piece of equipment or a system in conjunction with a TEST SET, (as modified).
What is a Shop Equipment Installation Kit? 36 Items: A Shop Equipment Installation Kit (INSTALLATION KIT,SHOP EQUIPMENT) is an installation kit to adapt a SHOP EQUIPMENT (as modified) in a container, trailer, semitrailer, shelter or the like.
What is an Electromechanical Actuator Testing Machine? 26 Items: An Electromechanical Actuator Testing Machine (TESTING MACHINE,ELECTROMECHANICAL ACTUATOR) is a device designed to check the functions and pre-set data of an electromechanically actuated component.
What is an Aircraft Ordnance Boresighting Equipment? 30 Items: An Aircraft Ordnance Boresighting Equipment (BORESIGHTING EQUIPMENT,AIRCRAFT ORDNANCE) is a specific number of devices designed to check the harmonization or possibly boresighting of the armament system installed in an aircraft with the opto-electronic target kit in simulated flight systems of the aircraft on the ground.
What is a Hydraulic Actuator Seal Sizing Ring? 82 Items: A Hydraulic Actuator Seal Sizing Ring (SIZING RING,SEAL,HYDRAULIC ACTUATOR) is an item designed to alter the diameter of an existing hole without damage to the original material. It makes the altered item tight and secure.
What is an Aircraft Engine Maintenance Fixture? 3907 Items: An Aircraft Engine Maintenance Fixture (FIXTURE,ENGINE MAINTENANCE,AIRCRAFT) is a fixture designed to hold/position aircraft engine/engine components to facilitate inspection, maintenance, repair, testing and/or replacement of components.
What is an Aircraft Fuel System Components Fixture? 182 Items: An Aircraft Fuel System Components Fixture (FIXTURE,FUEL SYSTEM COMPONENTS,AIRCRAFT) is a fixture designed to hold/position fuel system components/subassemblies to facilitate inspection, maintenance, repair, testing and/or replacement.
What is an Aircraft Hydraulic System Components Fixture? 172 Items: An Aircraft Hydraulic System Components Fixture (FIXTURE,HYDRAULIC SYSTEM COMPONENTS,AIRCRAFT) is a fixture designed to hold/position aircraft hydraulic system components/subassemblies to facilitate inspection, maintenance, repair, testing and/or replacement.
What is an Aircraft Pneumatic Systems Components Fixture? 21 Items: An Aircraft Pneumatic Systems Components Fixture (FIXTURE,PNEUMATIC SYSTEMS COMPONENTS,AIRCRAFT) is a fixture designed to be attached to aircraft pneumatic system components/subassemblies to facilitate inspection, maintenance, repair, testing and/or replacement.
What is a Bushing Installation And Removal Tool? 140 Items: A Bushing Installation And Removal Tool (INSTALLATION AND REMOVAL TOOL,BUSHING) is an item specifically designed to perform attaching and interface functions on aircraft fuel tanks.
What is an Aircraft Composite Repair Set? 47 Items: An Aircraft Composite Repair Set (COMPOSITE REPAIR SET,AIRCRAFT) is a portable set which provides the capability to automatically generate, control and monitor vacuum pressure, cure time, and temperature of dry-out andrepair of bonded composite aircraft structures. Set shall include CONTROLLER, COMPOSITE REPAIR SET, AIRCRAFT, monitoring devices, heating blankets, vacuum source, temperature indicators/recorders and and necessary cables/connectors.
What is an Aircraft Components Test Tank Unit? 22 Items: An Aircraft Components Test Tank Unit (TANK UNIT,TEST,AIRCRAFT COMPONENTS) is a container used with a TEST STAND (as modified) or TEST STATION (as modified) to facilitate testing of aircraft components. May include gauges, hook up lines, controller, adapters and the like. May be base mounted or car contained for portability.
What is an Aircraft Maintenance Test Data Computer? 49 Items: An Aircraft Maintenance Test Data Computer (COMPUTER,TEST DATA,AIRCRAFT MAINTENANCE) is an item which as an insertion or modular design is part of a test kit or test facility. It controls test runs, compares mechanical and electric/electronic values of the components to be checked with stored nominal data and enables the printout of test logs.
What is a Shot Peen Mask? 165 Items: A Shot Peen Mask (MASK,SHOT PEEN) is a device designed to shield and protect an item during the shot blasting process.
What is an Interface Device Panel? 405 Items: An Interface Device Panel (PANEL,INTERFACE DEVICE) is an item which is specifically designed to contain wiring and circuitry components necessary to interface the Avionic Unit Under Test and the prime Automatic Test Equipment.
What is an Interface Device Accessory Set? 342 Items: An Interface Device Accessory Set (ACCESSORY SET,INTERFACE DEVICE) is a grouping of various hardware items such as extender cards, adapter, probes, cable assemblies, indicator overlays, alignment fixtures, and the like, to support the testing of units Under Test on the Automatic Test Equipment as required by the Test Program Set.
What is an Interface Device Test Fixture Assembly? 130 Items: An Interface Device Test Fixture Assembly (FIXTURE ASSEMBLY,TEST,INTERFACE DEVICE) is a device which provides additional circuitry to resolve incompatibilites between the Unit Under Test and the Automatic Test Equipment, which is not appropriate for inclusion in the PANEL, INTERFACE DEVICE because of weight, size or heat limitations. It may also be used as a holding fixture to secure the Unit Under Test.
What is an Interface Device Holding Fixture Assembly? 144 Items: An Interface Device Holding Fixture Assembly (FIXTURE ASSEMBLY,HOLDING,INTERFACE DEVICE) is a specifically designed item used to maintain proper positioning of an Avionic Unit Under Test during testing on Automatic Test Equipment.
What is an Interface Device Adapter Assembly? 1443 Items: An Interface Device Adapter Assembly (ADAPTER ASSEMBLY,INTERFACE DEVICE) is a device designed to facilitate connection, provide accommodation, enable application, to permit use of a given item with an unlike item.
What is an Electrical Interface Device Cable Assembly? 826 Items: An Electrical Interface Device Cable Assembly (CABLE ASSEMBLY,INTERFACE DEVICE,ELECTRICAL) is a specifically designed item, with or without branches, having one or more ends processed or terminated in fittings for use between Units Under Test and interface devices.
What is an Electrical Interface Device Cable Assembly Set? 221 Items: An Electrical Interface Device Cable Assembly Set (CABLE ASSEMBLY SET,INTERFACE DEVICE,ELECTRICAL) is a grouping of items having the same basic name for use with two or more separate CABLE ASSEMBLY, INTERFACE DEVICE.
What is an Aircraft Maintenance Adapter Set? 320 Items: An Aircraft Maintenance Adapter Set (ADAPTER SET,AIRCRAFT MAINTENANCE) is a group of two or more ADAPTERS (1) used to facilitate aircraft maintenance/repair. May also be used to assist in installation/removal of aircraft components. All parts may be contained in a bag or case. Excludes ADAPTER SET, TEST.
What is a Composite Repair Kit? 16 Items: A Composite Repair Kit (REPAIR KIT,COMPOSITE) is a group of items such as fiberglass, epoxy resin compounds, and the like.
What is an Aircraft Engine Ignition Test Set? 14 Items: An Aircraft Engine Ignition Test Set (TEST SET,IGNITION,AIRCRAFT ENGINE) is a collection of items designed to provide status of various components of an aircraft engine ignition system.
What is a Test Strip Holder? 22 Items: A Test Strip Holder (HOLDER,TEST STRIP) is a supporting/holding piece designed to temporarily secure a test strip for coating, stripping, shotpeening, or painting processes, during maintenance and repair of aircraft components.
What is an Aircraft Wing Maintenance Stand? 19 Items: An Aircraft Wing Maintenance Stand (STAND,MAINTENANCE,AIRCRAFT WING) is a structure designed for assembly, disassembly and repair of aircraft wings and/or wing sections.
What is an Aircraft Engine Maintenance Template? 52 Items: An Aircraft Engine Maintenance Template (TEMPLATE,ENGINE MAINTENANCE,AIRCRAFT) is a device designed to facilitate the alignment of engine components during assembly/disassembly. May have locating pins, drill points, special markings, and the like.
What is an Aircraft Composite Repair Mold? 21 Items: An Aircraft Composite Repair Mold (MOLD,COMPOSITE REPAIR,AIRCRAFT) is a contoured fixture designed to facilitate the layup, forming, and curing of composite aircraft skin sections.
What is a Countermeasures Dispensing Set Test Set? 33 Items: A Countermeasures Dispensing Set Test Set (TEST SET,COUNTERMEASURES DISPENSING SET) is a test set primarily designed for use in making examinations of a DISPENSING SET, COUNTERMEASURES. It may include one or more test units, carrying case, cable, computer and the like.
What is an Aircraft Maintenance Template? 94 Items: An Aircraft Maintenance Template (TEMPLATE,AIRCRAFT MAINTENANCE) is a device designed to facilitate the alignment of aircraft components during assembly/disassembly. May have locating pins, drill points, special markings and the like. See also TEMPLATE, ENGINE MAINTENANCE, AIRCRAFT, and TEMPLATE, CONTROL RIGGING, AIRCRAFT.
What is an Aircraft Engine Maintenance Machining Fixture? 366 Items: An Aircraft Engine Maintenance Machining Fixture (FIXTURE,MACHINING,AIRCRAFT ENGINE MAINTENANCE) is a fixture designed to hold aircraft engine or auxiliary power unit individual parts, subassemblies, or assemblies in position for machining to design tolerances during modification or repair.
What is an Aircraft Maintenance Alignment Jig? 156 Items: An Aircraft Maintenance Alignment Jig (JIG,ALIGNMENT,AIRCRAFT MAINTENANCE) is a jig designed to align aircraft components during maintenance and/or test procedures.
What is an Aircraft Maintenance Bonding Jig? 33 Items: An Aircraft Maintenance Bonding Jig (JIG,BONDING,AIRCRAFT MAINTENANCE) is a jig designed to align and secure aircraft components during bonding processes. Excludes JIG(1),COMPOSITE REPAIR,AIRCRAFT.
What is an Aircraft Engine Maintenance Drill Jig? 84 Items: An Aircraft Engine Maintenance Drill Jig (JIG,DRILL,AIRCRAFT ENGINE MAINTENANCE) is a jig designed to align drill points when performing maintenance on aircraft engine components.
What is an Aircraft Maintenance Drill Jig? 68 Items: An Aircraft Maintenance Drill Jig (JIG,DRILL,AIRCRAFT MAINTENANCE) is a jig designed to align drill points when performing maintenance on aircraft components.
What is an Aerial Refueling Boom Nozzle Test Kit? 21 Items: An Aerial Refueling Boom Nozzle Test Kit (TEST KIT,AERIAL REFUELING BOOM NOZZLE) is a collection of items designed to test an aerial refueling boom nozzle.
What is an Electrical Test Set Adapter Subassembly? 24 Items: An Electrical Test Set Adapter Subassembly (ADAPTER SUBASSEMBLY,ELECTRICAL TEST SET) is an item which is a subassembly of an Adapter, Electrical Test Set and cannot be assigned a more definite item name.
What is an Aircraft Turbine Engine Components Case? 16 Items: An Aircraft Turbine Engine Components Case (CASE,TURBINE ENGINE COMPONENTS,AIRCRAFT) is a reusable item with various shapes and designed to store aircraft turbine engine components during maintenance operations. It may have several compartments and a carrying handle.
What is an Aircraft Maintenance Tool Kit Case? 57 Items: An Aircraft Maintenance Tool Kit Case (CASE,TOOL KIT,AIRCRAFT MAINTENANCE) is a reusable item with various shapes designed to store tool kits for maintenance operations. It may have several compartments and a carrying handle.
What is a Sizing Jaw Set? 34 Items: A Sizing Jaw Set (JAW SET,SIZING) is two or more similar items used to produce the proper dimensions of aircraft engine components during maintenance or repair.
What is a Pressure Test Adapter? 168 Items: A Pressure Test Adapter (ADAPTER,PRESSURE TEST) is an item which provides the facilities for connecting hydraulic or pneumatic items to be tested to a piece of test equipment. Excludes ADAPTER, MECHANICAL TEST; and ADAPTER (2), TEST.
What is a Test Block Adapter? 62 Items: A Test Block Adapter (ADAPTER,TEST BLOCK) is an adapter which provides the facilities for connecting hydraulic or pneumatic items to be tested to a piece of test equipment. Excludes ADAPTER, MECHANICAL TEST and ADAPTER (2), TEST.
What is an Aircraft Component Test Plug? 189 Items: An Aircraft Component Test Plug (TEST PLUG,AIRCRAFT COMPONENT) is a device designed to replace a valve or the like in a hydraulic/pneumatic component or system for the purpose of testing during repair/maintenance and/or overhaul. Excludes PLUG, TUBE REPAIR and PLUE,(as modified).
What is an Aircraft Oxygen System Components Test Stand? 11 Items: An Aircraft Oxygen System Components Test Stand (TEST STAND,AIRCRAFT OXYGEN SYSTEM COMPONENTS) is a Test Stand which has the necessary instrumentation, mechanical and electrical facilities for testing the components of an aircraft oxygen system such as CONCENTRATOR, OXYGEN, AIRCRAFT. May include work surface and storage space for test accessories such as hoses, adapters, and the like. Excludes TEST STAND, DEMAND OXYGEN REGULATOR.
What is a Fuel Control System Test Set? 64 Items: A Fuel Control System Test Set (TEST SET,FUEL CONTROL SYSTEM) is an item specifically designed to provide appropriate instrumentation and data acquisition/control logic for testing of an aircraft or vehicular fuel system and/or components.
What is a Cable Breakout Adapter? 195 Items: A Cable Breakout Adapter (ADAPTER,CABLE BREAKOUT) is an item designed to electrically and physically accommodate cable connectors and the terminations to which the cable would normally be connected, and thereby provide facilities for the insertion of test equipment leads, probes, and the like, for test and/or monitoring of power, intelligence, and the like, that may be on the wire complement of the cable. The item may provide facilities for either series, shunt, or interwire tests of the cable under actual operating conditions.
What is a Cable Breakout Adapter Set? 18 Items: A Cable Breakout Adapter Set (ADAPTER SET,CABLE BREAKOUT) is a set consisting of two or more ADAPTER, CABLE BREAKOUT with associated connecting cables that provide facilities for the insertion of test equipment leads, probes, and the like, for test and/or monitoring of power, intelligence, and the like, that may be on the wire complement of the cable. The item may provide facilities for either series, shunt, or interwire tests of the cable while under actual operating conditions.
What is a Test Adapter Set? 210 Items: A Test Adapter Set (ADAPTER SET,TEST) is a grouping of items consisting of two or more ADAPTER (2), TEST. May include a mounting, or other facility for storage and rapid access to individual adapters.
What is a Power Distribution Console? 41 Items: A Power Distribution Console (CONSOLE,POWER DISTRIBUTION) is a console specifically designed to distribute and control electrical power. It includes equipment to supply either alternating or direct current of various output characteristics.
What is a Test Set Coupler? 72 Items: A Test Set Coupler (COUPLER,TEST SET) is a component which provides a means of transfer of electrical energy between a test set and another component(s). See also ADAPTER, TEST.
What is a Test Set Selector Coupler? 15 Items: A Test Set Selector Coupler (COUPLER,SELECTOR,TEST SET) is a single component with the dual function of providing coupler facilities, and of selecting components of another item during the conduct of a testing operation.
What is a Test Equipment Dolly? 26 Items: A Test Equipment Dolly (DOLLY,TEST EQUIPMENT) is a hand-propelled device consisting of three or more wheels attached to a frame, and designed for carrying or supporting test equipment. May include facilities for connecting and interconnecting components of the test equipment to obtain electrical operating power or functional utility. Test equipment components are not included.
What is a Computer Simulator-Verifier? 23 Items: A Computer Simulator-Verifier (SIMULATOR-VERIFIER,COMPUTER) is a single component with the dual function of providing synthetic signals which are fed into a computer, and of determining discrepancies between computed and independently derived solutions.
What is a Control Test Set? 151 Items: A Control Test Set (TEST SET,CONTROL) is a test set specifically designed for use in making examinations of controls.
What is an Electronic Systems Test Set? 393 Items: An Electronic Systems Test Set (TEST SET,ELECTRONIC SYSTEMS) is a test set specifically designed for use in making examinations and providing discrete evaluations of the over-all performance of a system(s) or subsystem(s). Excludes TEST SET (1), ANTENNA SYSTEM; TEST SET (1), FIRE CONTROL SYSTEM; TEST SET (1), FLIGHT CONTROL SYSTEM; and TEST SET (1), TELEMETERING SYSTEM.
What is an Electric And Hydraulic System Components Test Stand? 42 Items: An Electric And Hydraulic System Components Test Stand (TEST STAND,ELECTRIC AND HYDRAULIC SYSTEM COMPONENTS) is a cabinetlike item usually with a front work area and consisting of the necessary instrumentation and mechanical and electrical facilities for component mounting. Designed to simultaneously test efficiency of packaged hydraulic pressure and electric power generating equipment. Component under test is equipped with self-contained power source. Excludes TEST STAND, HYDRAULIC SYSTEM COMPONENTS.
What is a Hydraulic Pumping Unit Test Stand? 16 Items: A Hydraulic Pumping Unit Test Stand (TEST STAND,HYDRAULIC PUMPING UNIT) is a cabinetlike item with a front work area and consisting of the necessary instrumentation and facilities for testing a PUMPING UNIT, HYDRAULIC, (as modified). The item is not designed for mounting components under test. Excludes TEST STAND, HYDRAULIC SYSTEM COMPONENTS.
TESTER,AIRCRAFT ACCELEROMETER 13 Items
What is a Hydraulic And Pneumatic System Components Electric Test Stand? 28 Items: A Hydraulic And Pneumatic System Components Electric Test Stand (TEST STAND,ELECTRIC,HYDRAULIC AND PNEUMATIC SYSTEM COMPONENTS) is a cabinetlike item usually with a front work area and consisting of the necessary instrumentation, mechanical and electrical facilities for component mounting. Designed to test efficiency of packaged hydraulic and pneumatic pressure and electric power generating equipment. Component under test is equipped with self contained power source. Excludes TEST STAND, HYDRAULIC SYSTEM COMPONENT; TEST STAND, ELECTRIC; and HYDRAULIC SYSTEM COMPONENTS.
What is a Pneumatic System Components Test Set? 112 Items: A Pneumatic System Components Test Set (TEST SET,PNEUMATIC SYSTEM COMPONENTS) is an item designed specifically for making examinations of pneumatic system components, such as valves, pressure regulators, accumulators, hose lines, pressure switches, and the like. May include facilities for checking pneumatic systems for leakage and performance. See also TEST SET, LEAKAGE, GUIDED MISSILE DRAINAGE EQUIPMENT.
What is an Electrical-Electronic Test Equipment Plug-In Unit? 102 Items: An Electrical-Electronic Test Equipment Plug-In Unit (PLUG-IN UNIT,ELECTRICAL-ELECTRONIC TEST EQUIPMENT) is an electronic subassembly designed to be plugged into one or more basic pieces of test equipment to extend the capabilities of the basic instrument. The basic instrument cannot function without one or more plug-in units (as required) in position.
What is an Alignment Electronic System Boresight? 18 Items: An Alignment Electronic System Boresight (BORESIGHT,ALIGNMENT ELECTRONIC SYSTEM) is a grouping of items designed for making examinations of alignment measurements for information on aircraft weapons systems and navigation systems. The alignment information obtained is accurately measured, processed, displayed and/or recorded in some fashion. It consists of a laser transmitter, receiver/recorder, and a boresight processing unit, set-up fixtures, and associated cables.
What is a Hydraulic System Components Test Stand Control Box? 13 Items: A Hydraulic System Components Test Stand Control Box (CONTROL BOX,HYDRAULIC SYSTEM COMPONENTS TEST STAND) is an enclosure which includes, mounts and electrical devices such as switch(es), connector(s), circuit card(s), and the like it. It is specifically designed to control a TEST STAND, HYDRAULIC SYSTEM COMPONENTS.
What is a Hydraulic System Components Test Stand Tool Kit? 16 Items: A Hydraulic System Components Test Stand Tool Kit (TOOL KIT,HYDRAULIC SYSTEM COMPONENTS TEST STAND) is a group of items with special tools used in conjunction with a TEST STAND,HYDRAULIC SYSTEM COMPONENTS (11017).
What is a Hydraulic System Components Test Set? 31 Items: A Hydraulic System Components Test Set (TEST SET,HYDRAULIC SYSTEM COMPONENTS) is an item or collection of items designed specifically for making examinations of hydraulic system components, such as valves, pressure regulators, accumulators, hose lines, pressure switches, and the like. May include favilities for checking hydraulic systems for leaks and performance. See also TEST SET, LEAKAGE, GUIDED MISSILE DRAINAGE EQUIPMENT, OR TEST SET, PNEUMATIC SYSTEM COMPONENTS.
What is a Balancer And Vibration Analyzer? 13 Items: A Balancer And Vibration Analyzer (ANALYZER,BALANCER AND VIBRATION) is a portable instrument which performs critical test, such as propeller balance, in-flight engine monitoring, mils broadband, failure and trend prediction, reduction gearbox assembly break-in, on-wing engine diagnostics, torguemeter run-out, turbine seal break-in. May include interconnections, cabling, transducers, storage/carrying case and other related accessories. EXCLUDES: TEST EQUIPMENT, HELICOPTER ROTOR HEAD BALANCE AND BLADE TRACK RUN; BALANCING, MACHINE, DYNAMIC-STATIC, HORIZONTAL; BALANCING, WHEEL, NONELECTRIC; AND ANALYZER, SPECTRUM.
What is an Aircraft Maintenance Test Cap? 60 Items: An Aircraft Maintenance Test Cap (TEST CAP,AIRCRAFT MAINTENANCE) is an item or assembly that closes an existing opening during maintenance. It may include gasket(s), or clamps and may have provisions for drainage or bleeding pressurized lines. It protects an opening from foreign objects and dirt and enables testing procedures. Excludes CAP, FILLER, OPENING; CAP, PIPE; CAP, QUICK DISCONNECT; CAP-PLUG, RADIATOR TESTING; PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is an Aircraft Engine Component Polishing Adapter? 74 Items: An Aircraft Engine Component Polishing Adapter (ADAPTER,POLISHING,AIRCRAFT ENGINE COMPONENT) is accommodates the positioning arm of a polishing machine to fit the surface of an aircraft engine component with a contact surface conforming to the surface of the aircraft engine component to be polished. It consists of a mounting plate and a foot fabricated from an appropriate material. The mounting plate attaches to a polishing machine and the foot is specially ground to hold a PAD, POLISHING AND RUBBING. The polishing machine rotates the aircraft engine component and moves the pad to contact the surface to be polished. The polishing device may be directly mounted or be attached with a section of TAPE, FASTENER, HOOK.
What is a Test Manifold? 59 Items: A Test Manifold (MANIFOLD,TEST) is a vessel that has multiple inlet or outlet ports for filling, draining, or measurement of temperature, pressure, flow rate, or other properties. It may be a component of a test set or stand, or replace end item component manifolds for test purposes. It may include fittings and gages or connections to associated test equipment. Excludes manifolds that are an original component of an end item other than maintenance or test equipment.
What is a Shot Peen Mask Set? 11 Items: A Shot Peen Mask Set (MASK SET,SHOT PEEN) is a group of MASK, SHOTPEEN's that are required for maintenance of aircraft engines or other items requiring shot blasting as a part of regular maintenance.
What is an Engine Analyzer? 11 Items: An Engine Analyzer (ANALYZER,ENGINE) is an instrument capable of performing two or more diagnostic tests on the exhaust, ignition, electrical, and the like, systems of a gasoline or diesel engine. Connecting and test cables may be included. See also METER, MULTIPLE SCALE and MULTIMETER.
What is a Radio Frequency Test Antenna Cover? 51 Items: A Radio Frequency Test Antenna Cover (COVER,ANTENNA,RADIO FREQUENCY TEST) is an enclosure for an ANTENNA, used during the testing of an ANTENNA or ANTENNA GROUP. It has a radio frequency absorbing liner and radio frequency connecter(s) to monitoring device. For generalized items with no connectors see: ABSORBER, RADIO FREQUENCY RADIATION.
What is an Aircraft Engine Maintenance Machining Fixture Set? 12 Items: An Aircraft Engine Maintenance Machining Fixture Set (FIXTURE SET,MACHINING,AIRCRAFT ENGINE MAINTENANCE) is a group of two or more FIXTURE (1), MACHINING AIRCRAFT MAINTENANCE. May include hardware such as adapters, gaskets, valves, clamps, cables and fittings.
What is a Hand Operated Hydraulic System Filler And Bleeder? 11 Items: A Hand Operated Hydraulic System Filler And Bleeder (FILLER AND BLEEDER,HYDRAULIC SYSTEM,HAND OPERATED) is a combination of storage tank(s), filters, switches, gages, hoses, and fittings sufficient to service a hydraulic system. The power for moving the hydraulic fluid is provided by a hand pump. May include hose racks or reels, and related plugs, caps, tools and miscellaneous hardware.
What is an Aircraft Component Maintenance Stand? 94 Items: An Aircraft Component Maintenance Stand (STAND,MAINTENANCE,AIRCRAFT COMPONENT) is an aerospace ground equipment frame used for supporting off-aircraft subassemblies and subsystem components during and awaiting maintenance. May be multifunctional or capable of holding items in multiple position. Wheels, casters, or shock absorbing legs may be included. Use a more specific STAND name if available.
What is a Composite Curing Blanket? 68 Items: A Composite Curing Blanket (BLANKET,COMPOSITE CURING) is an item usually flexible designed to repair composite structures by curing (hot bonding). It has one or more electrical zones which allow it to apply uniform heat exactly where the area is being repaired. It may also have a sensor to control temperature in hazardous areas. It connects to a CONTROLLER,COMPOSITE REPAIR SET,AIRCRAFT.
What is an Interface Test Unit Console? 11 Items: An Interface Test Unit Console (CONSOLE,INTERFACE TEST UNIT) is a console that provides digital test set interface for operational support and control. It may contain mounting for power, low frequency feed modules, switching connector assemblies and interface connector modules. Excludes: TEST SET, INTERFACE
What is a Test Control Console? 21 Items: A Test Control Console (CONSOLE,TEST CONTROL) is a console designed to test and control high power functions. It may include test set computer, disk drive devices and data communication links. Excludes: CONSOLE, POWER DISTRIBUTION
What is an Instrumentation Console? 19 Items: An Instrumentation Console (CONSOLE,INSTRUMENTATION) is a console that performs control and monitoring fot all instrumentation. Also, may contain system timing, wave form digitzing, communications bus interface and power supply.
What is a Jack Support Platform? 10 Items: A Jack Support Platform (SUPPORT PLATFORM,JACK) is an item, usually square in shape, made of various materials and designed to be placed under a SHOE, JACK-SUPPORT or the like, providing additional support and helping to prevent the SHOE, JACK-SUPPORT from sinking into the ground or surface upon which it is placed. A handle(s) may be included on item to aid in carrying and placement. Excludes: SHOE, JACK.
What is an Aircraft Multi System Test Set? 12 Items: An Aircraft Multi System Test Set (TEST SET,MULTI SYSTEM,AIRCRAFT) is an all purpose box having multiple test connectors and electrical test points that tests multiple aircraft systems. Various hook-ups allow additional systems to be diagnosed and tested by adding alignment fixtures, cable assembliers, probes and cards. It may be used to test the rigging, throttle location on the engine throttle handle linkage, and with the addition of other test boxes, the radar receiver's antennas.
What is a Panel Fastener Installation And Removal Tool? 22 Items: A Panel Fastener Installation And Removal Tool (INSTALLATION AND REMOVAL TOOL,PANEL FASTENER) is an item specifically designed to assist in attaching and detaching components of panel fasteners such as studs, grommet assemblies, and the like, without damaging adjacent structures.
What is a Tester Mission Equipment Support Set? 21 Items: A Tester Mission Equipment Support Set (MISSION EQUIPMENT SUPPORT SET,TESTER) is a group of items used to reconfigure the main Automatic Test Station to meet the testing requirements of a unit during testing. It may include hardware and/or test equipment that can be installed, integrated with, or removed from the Automatic Test Station as required.