4920-14-253-4934

500-17-10TYPER2RNCC: 5 | RNVC: 9 | DAC: 2500-17-00TYPE2RNCC: 5 | RNVC: 9 | DAC: 4 10 Nov 1987 4920-14-253-4934

4330-14-287-5966 4330142875966 142875966 is a component of a filter, fluid designed to contain the filter element, fluid and attach to the head, fluid filter or the cover, access. it may have inlet and/or outlet connections, means for mounting a drain plug(s), check, relief and or by-pass valves. excludes bowl, sediment.see also strainer body, sediment.

5355-21-886-2330 5355218862330 218862330 is an item designed to transmit manual, rotary or linear motion to other devices. may include detachable or nondetachable stud (shaft), pointer, or skirt. it may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. for items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see handwheel. for items calibrated in units or series of divisions to denote relative positioning of devices see dial, control. excludes doorknob; and handle (as modified).

6220-99-925-5864 6220999255864 999255864 is an item composed of a coated transparent or partly transparent/partly opaque materiels, engraved with letters, words and/or symbols, designed to allow light to be transmitted through the engraving(s) for indicating purposes. it may have an electrical lighting circuit either on a removable printed circuit board or embedded within the panel. the circuit may have removable or nonremovable electroluminescent and/or incandescent lamps for lighting. dials and/or switches may be included. excludes display, optelectronic. see also indicator (as modified), and light (1), indicator

5365-00-009-7859 5365000097859 000097859 is a tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. it is designed to maintain a predetermined distance between assembled parts. the item may be with or without flange(s) of any peripheral shape. the overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (when the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). for items having other than a round or hexagon peripheral shape, see spacer, plate. excludes items with lubricating features, see bearing, sleeve and bushing, sleeve. see also bushing, tapered; spacer, ring; washer, flat; and washer, (as modified).