Motor Vehicle Maintenance and Repair Shop Specialized Equipment
Federal Supply Class (FSC): 4910
NATO Supply Classification Class (NSC): 4910
Group Description: Maintenance and Repair Shop Equipment
Federal Supply Group (FSG): 49
NATO Supply Classification Group (NSG): 49
Page 35 of 91
Includes Automotive Lifts; Wheel Aligners; Brake Service Equipment; Tire Maintenance and Repair Equipment; Test stands and test equipment specially designed for use with motor vehicles.
Excludes Hand Tools (FSG 51); Lubrication and Fuel Dispensing Equipment (FSC 4930); Basic types of electrical and electronic test instruments, including those specifically designed, such as ammeters, voltmeters, ohmmeters, multimeters, and similar instruments as shown in the indexes in the FSC (FSC 6625).
Note-Specialized equipment which is designed for automotive maintenance and repair, and which is also used for the maintenance and repair of nonautomotive vehicles or equipment, will be classified in Class 4910. Jigs, fixtures, and templates used in conjunction with maintenance and repair shop specialized equipment are classified in this group. However, jigs, fixtures, and templates used in conjunction with metalworking machinery are classified in Group 34. Infrared assemblies, subassemblies, and components specifically designed as test and maintenance specialized equipment are classified in the appropriate classes of this group. Excluded from this group is infrared equipment designed for testing communications and night vision equipment.
Additional Information for Motor Vehicle Maintenance and Repair Shop Specialized Equipment
NATO Supply Class 4910 is a classification within NATO Supply Group 49, which is dedicated to Maintenance And Repair Shop Equipment. Specifically, Class 4910 focuses on Motor Vehicle Maintenance And Repair Shop Specialized Equipment.
This class includes a wide range of specialized equipment used in motor vehicle maintenance and repair shops. It encompasses tools and machinery that are specifically designed for servicing and repairing motor vehicles, such as cars, trucks, and motorcycles.
Some examples of equipment that fall under NATO Supply Class 4910 include:
1. Automotive diagnostic tools: These tools are used to identify and troubleshoot issues with vehicle systems, such as engine, transmission, and electrical systems.
2. Vehicle lifts and hoists: These are used to elevate vehicles, allowing mechanics to access the undercarriage and perform repairs or maintenance tasks.
3. Tire changers and balancers: These machines are used to remove and install tires on vehicles, as well as balance the tires for optimal performance.
4. Brake service equipment: This includes tools and machinery used for inspecting, repairing, and replacing brake components, such as brake pads, rotors, and calipers.
5. Engine repair tools: These tools are specifically designed for working on vehicle engines, including tools for removing and installing engine components, as well as tools for measuring and adjusting engine parameters.
6. Welding and cutting equipment: This includes tools and machinery used for welding and cutting metal components, which are often required for repairing vehicle frames and body panels.
7. Fluid handling equipment: This includes tools and machinery used for handling various fluids in vehicles, such as oil, coolant, and brake fluid. Examples include oil drain pans, fluid extractors, and fluid transfer pumps.
These are just a few examples of the specialized equipment included in NATO Supply Class 4910. The class encompasses a wide range of tools and machinery that are essential for maintaining and repairing motor vehicles in professional automotive workshops.
NSN by Country
Frequently Asked Questions(FAQ) for Federal Supply Class 4910
- What is Federal Supply Class 4910?
- FSC 4910 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 4910) in the USA for supply items codified in the category of Motor Vehicle Maintenance and Repair Shop Specialized Equipment.
- What is NATO Supply Classification Class 4910?
- NSC 4910 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4910 in the USA) for supply items codified in the category of Motor Vehicle Maintenance and Repair Shop Specialized Equipment.
- Which Federal Supply Group is FSC 4910 in?
- FSC 4910 is in Federal Supply Group(FSG) 49 which contains .
- Which NATO Supply Classification Group is NSC 4910 in?
- NSC 4910 is in NATO Supply Classification Group(NSG) 49 which contains .
Supply Items Included in Federal Supply Class 4910
- Honing Machine,Horizontal 10 Items
- Jack,Dolly Type,Mechanical 51 Items
- What is an Automotive Generator And Voltage Regulator Test Set? 61 Items
- An Automotive Generator And Voltage Regulator Test Set (TEST SET,GENERATOR AND VOLTAGE REGULATOR,AUTOMOTIVE) is a test set primarily designed for use in making examinations of low-voltage automotive generators and voltage and current regulators.
- Towbar,Motor Vehicle 86 Items
- What is a Cylinder Compression Tester? 188 Items
- A Cylinder Compression Tester (TESTER,CYLINDER COMPRESSION) is a device designed for testing the compression of engine cylinders.
- What is a Hydraulic Brake Pressure Equalizer Tester? 44 Items
- A Hydraulic Brake Pressure Equalizer Tester (TESTER,PRESSURE EQUALIZER,HYDRAULIC BRAKE) is a device designed for testing the pressure of hydraulic brakes.
- What is a Brake And Clutch Reliner? 29 Items
- A Brake And Clutch Reliner (RELINER,BRAKE AND CLUTCH) is a device combining drilling, countersinking, riveting, and usually grinding facilities. It is designed to accomplish the operations necessary for delining and relining clutch plates and/or shoe-type brakes.
- What is a Motor Vehicle Lift? 414 Items
- A Motor Vehicle Lift (LIFT,MOTOR VEHICLE) is a power-operated device consisting essentially of a vertically movable supporting structure for elevating motor vehicles to a height convenient for maintenance operations.
- What is an Ignition Timing Light? 80 Items
- An Ignition Timing Light (LIGHT,IGNITION TIMING) is a neon lamp type indicator designed to show the interval of electrical impulses from the distributor or magneto to individual spark plugs of a gasoline engine.
- What is a Brake Lining Grinding Machine? 18 Items
- A Brake Lining Grinding Machine (GRINDING MACHINE,BRAKE LINING) is a motor driven device used to smooth and size shoe mounted brake linings by means of abrasive action.
- What is a Tire Vulcanizing Mold? 410 Items
- A Tire Vulcanizing Mold (VULCANIZING MOLD,TIRE) is a metal form in which pneumatic tire casings are partially or entirely inclosed and subjected to pressure and heat for the shaping and curing of retreads and/or repair sections.
- What is a Gasoline Engine Exhaust Analyzer? 59 Items
- A Gasoline Engine Exhaust Analyzer (ANALYZER,GASOLINE ENGINE EXHAUST) is an instrument designed to indicate the efficiency of gasoline engine carburetion by determining the air-fuel ratio and/or the completeness of combustion.
- What is an Engine Distributor Tester? 30 Items
- An Engine Distributor Tester (TESTER,ENGINE DISTRIBUTOR) is an indicating device designed primarily for checking performance of gasoline engine distributors.
- What is a Wheel Alignment Indicator? 84 Items
- A Wheel Alignment Indicator (INDICATOR,WHEEL ALIGNMENT) is a composite group of gages and attachments, with or without runway facilities, designed to measure the degree of caster, camber, kingpin angle, toe-in and/or turning radius of automotive vehicle wheels.
- What is a Vehicle Wheel Balancer? 171 Items
- A Vehicle Wheel Balancer (BALANCER,VEHICLE WHEEL) is an instrument that indicates amount and position of unbalance in vehicle wheels.
- Boring Machine,Engine Cylinder 20 Items
- What is a Mechanic's Creeper? 112 Items
- A Mechanic's Creeper (CREEPER,MECHANIC'S) is a low, caster-mounted platform designed to support and facilitate movements of personnel engaged in maintenance operations underneath motor vehicles.
- Grinding Machine,Crankshaft 15 Items
- What is a Tire Spreader? 45 Items
- A Tire Spreader (SPREADER,TIRE) is a device for opening and holding pneumatic tire casings during interior inspection and/or repair.
- What is a Motor Vehicle Frame Straightener? 16 Items
- A Motor Vehicle Frame Straightener (STRAIGHTENER,MOTOR VEHICLE FRAME) is a group of related components used in the detection and correction of distortion in motor vehicle frames.
- What is a Hot Patch Vulcanizer? 20 Items
- A Hot Patch Vulcanizer (VULCANIZER,HOT PATCH) is a clamp-type device designed for application of self-bonding patches and/or valve stem units in the repair of inner tubes or similar items.
- What is a Motor Vehicle Clutch Rebuilder? 30 Items
- A Motor Vehicle Clutch Rebuilder (CLUTCH REBUILDER,MOTOR VEHICLE) is a fixture for holding disk-type automotive clutch assemblies for adjustment, testing and/or repair.
- What is an Inner Tube Plate Vulcanizer? 12 Items
- An Inner Tube Plate Vulcanizer (VULCANIZER,PLATE,INNER TUBE) is a stationary device consisting of a clamping fixture and permanent heating unit used for bonding rubber repair sections to pneumatic tubes.
- What is a Tire And Tube Spot Press Vulcanizer? 14 Items
- A Tire And Tube Spot Press Vulcanizer (VULCANIZER,SPOT PRESS,TIRE AND TUBE) is a stationary device consisting of a clamping fixture and permanent heating unit used for bonding rubber repair sections to pneumatic tires and tubes. It may include additional equipment such as sandbags, tire contour plates, and the like.
- Stand,Maintenance,Automotive Axle 76 Items
- Stand,Maintenance,Automotive Engine 216 Items
- What is a Spark Plug Cleaner And Tester? 37 Items
- A Spark Plug Cleaner And Tester (CLEANER AND TESTER,SPARK PLUG) is a device for removing foreign matter from the electrode end of a spark plug by abrasive blast action and/or for determining the serviceability of a spark plug by observing its performance under simulated engine combustion pressures and voltages or under varied voltage conditions only.
- Tester,Spark Plug 20 Items
- Case,Test Set 86 Items
- What is a Self-Contained Tire Pressure Gage? 222 Items
- A Self-Contained Tire Pressure Gage (GAGE,TIRE PRESSURE,SELF-CONTAINED) is an instrument designed primarily to indicate air pressure in pneumatic tires, without the aid of additional air pressure. May also be designed for the precision checking of the accuracy of other tire pressure gages.
- Lathe,Brake Drum 65 Items
- What is a Spark Plug Cleaner? 15 Items
- A Spark Plug Cleaner (CLEANER,SPARK PLUG) is a device designed for removing foreign matter from the electrode end of a spark plug by abrasive blast action.
- What is a Hydraulic Brake Bleeder Tube? 76 Items
- A Hydraulic Brake Bleeder Tube (TUBE,BLEEDER,HYDRAULIC BRAKE) is a flexible tube usually having threaded metal fittings on one or both ends, used for bleeding air from and/or draining or flushing hydraulic brake systems.
- What is a Pneumatic Tire Demounter? 105 Items
- A Pneumatic Tire Demounter (DEMOUNTER,PNEUMATIC TIRE) is a hydraulically and/or manually operated device employed to force a pneumatic tire from its rim by means of pulling action applied to the rim and pushing action applied simultaneously at several points on the bead periphery of the tire. See also BEAD BREAKER, PNEUMATIC TIRE.
- What is a Valve Face Grinding Machine? 65 Items
- A Valve Face Grinding Machine (GRINDING MACHINE,VALVE FACE) is a grinding machine designed to reface internal combustion engine valves. It may be equipped to perform other related operations such as grinding valve ends, tappets, and rocker arms.
- What is a Hydraulic Brake Wheel Cylinder Clamp? 28 Items
- A Hydraulic Brake Wheel Cylinder Clamp (CLAMP,WHEEL CYLINDER,HYDRAULIC BRAKE) is a device for positioning on a hydraulic brake wheel cylinder to prevent the piston from leaving the cylinder during assembly or disassembly of brake.
- What is a Motor Vehicle Brake Tester? 40 Items
- A Motor Vehicle Brake Tester (TESTER,BRAKE,MOTOR VEHICLE) is a floor mounted testing unit consisting of four skid proof runways, each placed to accommodate a wheel of the vehicle being tested, complete with a recording mechanism for measuring the braking energy of the vehicle and indicating whether brakes are unequal or too weak.
- What is a Connecting Rod Alignment Indicator? 30 Items
- A Connecting Rod Alignment Indicator (INDICATOR,CONNECTING ROD ALIGNMENT) is a device for determining the existence of bend, twist, and/or offset distortions in connecting rods of internal combustion engines, compressors, and the like.
- What is a Cylinder Head Grinding Machine? 26 Items
- A Cylinder Head Grinding Machine (GRINDING MACHINE,CYLINDER HEAD) is a power operated grinder, primarily designed to resurface cylinder heads, manifolds and engine block tops. The work, and not the table, is manually or automatically passed back and forth over a horizontal, cupped-type, abrasive wheel, mounted in the working surface.
- What is a Diesel Fuel Injector Nozzle Tester? 116 Items
- A Diesel Fuel Injector Nozzle Tester (TESTER,DIESEL FUEL INJECTOR NOZZLE) is a manually operated test unit designed to check diesel fuel injector nozzles and holders for operation, opening pressure, and spray pattern.
- What is a Cam And Main Bearing Boring Machine? 33 Items
- A Cam And Main Bearing Boring Machine (BORING MACHINE,CAM AND MAIN BEARING) is a fixed or portable machine consisting essentially of a steel boring bar with required equipment designed to bore engine crankshaft main and/or camshaft bearings to a predetermined accuracy of inside diameter, linearity, and concentricity.
- What is a Headlight Beam Tester? 59 Items
- A Headlight Beam Tester (TESTER,HEADLIGHT BEAM) is a device essentially consisting of a light tunnel equipped with a reducing lens and transparent diagrammatic screen upon which a pattern is reproduced to test the lateral aim and elevation of a headlight beam, and a photoelectric cell andmeter to measure the luminous intensity. Mounting standard with wheels or track and rollers may be included.
- What is a Pneumatic Tire Mounter And Demounter? 207 Items
- A Pneumatic Tire Mounter And Demounter (MOUNTER AND DEMOUNTER,PNEUMATIC TIRE) is a manually operated device employed to loosen the bead, demount and/or mount pneumatic tires for various size wheels.
- What is an Automotive Engine Accessory Maintenance Fixture? 145 Items
- An Automotive Engine Accessory Maintenance Fixture (MAINTENANCE FIXTURE,AUTOMOTIVE ENGINE ACCESSORY) is a device for temporarily supporting and holding carburetors, fuel pumps, distributors, and similar items in the correct position during assembly, disassembly, repair and/or testing. Excludes STAND (as modified) and VISE (as modified). See also HOLDER, MAINTENANCE FIXTURE, MULTIPOSITION.
- What is a Fuel Injector Pump Tester? 71 Items
- A Fuel Injector Pump Tester (TESTER,FUEL INJECTOR PUMP) is a power driven mechanical device primarily designed for testing the flow and delivery rate of fuel injector pumps. Excludes TESTING EQUIPMENT, FUEL INJECTION.
- What is a Hydraulic System Components Test Stand? 48 Items
- A Hydraulic System Components Test Stand (TEST STAND,HYDRAULIC SYSTEM COMPONENTS) is a cabinetlike item usually with a front work area and consisting of the necessary instrumentation, integral hydraulic system and component mounting facilities. Designed to provide the hydraulic pressure for testing and/or calibrating hydraulic system components, such as valves, actuating cylinders, pressure regulators, accumulators, hose lines, hand and/or engine driven pumps and the like. May include facilities for filling and checking hydraulic systems for leakage and performance. See also PUMPING UNIT, HYDRAULIC.
- What is a Valve Seat Refacing Pilot? 188 Items
- A Valve Seat Refacing Pilot (PILOT,VALVE SEAT REFACING) is a device which, when inserted into the bore of a valve guide on an internal combustion engine, serves as a center post for aligning and guiding the grinding stone and/or reamer of a valve seat refacer.
- What is a Pneumatic Tire Inflator-Gage? 317 Items
- A Pneumatic Tire Inflator-Gage (INFLATOR-GAGE,PNEUMATIC TIRE) is an item consisting essentially of a pneumatic tire pressure gage with an attached length of hose equipped with device for supplying compressed air to a tire valve stem. In service the item is connected to an air supply hose.
- What is an Internal Combustion Engine Tester? 126 Items
- An Internal Combustion Engine Tester (TESTER,INTERNAL COMBUSTION ENGINE) is a device consisting of two or more gages or indicators mounted in a single unit, and capable of determining two or more different mechanical performance characteristics of an internal combustion engine, or its component systems, while functioning under engine operating conditions, by making either a single or a multiple test in order to determine one or more engine characteristics similar to the following: cylinder compression, engine oil pressure, carburator adjustment, manifold vacuum, fuel pump pressure, and the like. It does not include permanently installed gages, or any devices designed to test electrical components or characteristics of an engine. See also TESTER, IGNITION SYSTEM, ENGINE.
- What is a Radiator Test Plug? 45 Items
- A Radiator Test Plug (PLUG,RADIATOR TEST) is a cylindrical or ball-shaped item fabricated of solid rubber, having a hole running through its center through which a threaded stem is inserted. A wing nut, two washers and the stem are supplied to apply pressure, thereby expanding the ball and plugging up inlet and outlet opening in radiators. It is used to locate leaks in the core or tank of a radiator and the like.
- What is a Tire Hoist? 18 Items
- A Tire Hoist (HOIST,TIRE) is a device primarily designed for lifting pneumatic tires to facilitate inspection and/or repair of the tire with the use of a tire spreader. It is also commonly used for lifting tires in and out of molds, placing mounted tires on a wheel balancer spindle, and other general tire shop use. May be portable or stationary. Excludes SPREADER, TIRE.
- What is an Engine Electrical Test Adapter Set? 20 Items
- An Engine Electrical Test Adapter Set (ADAPTER SET,ENGINE ELECTRICAL TEST) is a group of adapters designed to permit electrical test connections to 24 volt waterproof electrical systems used on military equipment for making generator-regulator tests, coil tests, distributor tests, and voltage tests. It may also contain adapters to permit engine rpm tests and engine timing checks.
- What is an Engine Analyzer Set? 73 Items
- An Engine Analyzer Set (ANALYZER SET,ENGINE) is a complete multiple test unit designed for use in the testing of exhaust, ignition, voltage, revolutions per minute, etc., of a gasoline or diesel engine. Excludes ANALYZER, IGNITION AND VIBRATION, RECIPROCATING ENGINE.
- What is a Fuel Injection Testing Equipment? 36 Items
- A Fuel Injection Testing Equipment (TESTING EQUIPMENT,FUEL INJECTION) is excludes TESTER, FUEL INJECTOR PUMP.
- What is a Motor Vehicle Alignment Service Unit? 14 Items
- A Motor Vehicle Alignment Service Unit (ALIGNMENT SERVICE UNIT,MOTOR VEHICLE) is a group of related components primarily designed for and used in the detection and correction of distortion of chassis for automotive rolling equipment. Consists of STRAIGHTENER, MOTOR VEHICLE FRAME, and at least one of the following: wheel balancer, front end alignment equipment, and/or axle housing straightening equipment.
- What is an Automotive Generator And Starter Test Stand? 53 Items
- An Automotive Generator And Starter Test Stand (TEST STAND,AUTOMOTIVE GENERATOR AND STARTER) is a unit equipped with the necessary instruments and fixtures for testing starting motors, generators, and related units.
- What is a Wheel Lift Truck? 100 Items
- A Wheel Lift Truck (TRUCK,LIFT,WHEEL) is a hand propelled, wheeled vehicle equipped with hydraulic or mechanical lifting device used in installation, removal, and transportation of wheels for aircraft, buses, trucks, and the like.
- What is an Electric Valve Seat Grinding Driver? 20 Items
- An Electric Valve Seat Grinding Driver (DRIVER,VALVE SEAT GRINDING,ELECTRIC) is an electric powered hand-held rotary tool designed for engaging accessories when grinding valve seats. It contains no accessories. See also GRINDING KIT, VALVE SEAT, ELECTRIC.
- What is an Electric Valve Seat Grinding Kit? 66 Items
- An Electric Valve Seat Grinding Kit (GRINDING KIT,VALVE SEAT,ELECTRIC) is an item consisting of a DRIVER, VALVE SEAT GRINDING, ELECTRIC and accessories. Excludes GRINDING MACHINE, VALVE SEAT, ELECTRIC.
- What is a Drain Pan? 162 Items
- A Drain Pan (PAN,DRAIN) is a shallow metallic or non-metallic receptacle, equipped with baffle and wire cloth primarily designed to receive engine oil and the like, draining from automotive vehicles. Excludes oil drip pans.
- What is a Run-In Dynamometer? 36 Items
- A Run-In Dynamometer (DYNAMOMETER,RUN-IN) is a mechanical device used for running-in new and rebuilt internal combustion engines under load prior to their applicable installation by simulating actual load conditions and applying them to the engines. It employs a closed hydraulic turbine torque absorption system, and includes a tachometer, intake manifold vacuum gage, temperature gage, and indicator plate for valve operation. Excludes DYNAMOMETER, VEHICLE CHASSIS, SINGLE DRIVE.
- Table,Work,Automotive Maintenance 100 Items
- What is a Hydraulic Dolly Type Jack? 394 Items
- A Hydraulic Dolly Type Jack (JACK,DOLLY TYPE,HYDRAULIC) is a lifting device consisting of a ram actuated by a hydraulic pump, mounted on a base which has casters or the like for mobility. Excludes JACK, HYDRAULIC, HAND and JACK, HYDRAULIC, TRIPOD.
- What is a Compressed Air Dispensing Reel And Hose Assembly? 118 Items
- A Compressed Air Dispensing Reel And Hose Assembly (REEL AND HOSE ASSEMBLY,COMPRESSED AIR DISPENSING) is a device primarily designed to supply compressed air for pneumatic tire inner tube inflation. It usually consists of a mechanical spring or compressed air actuated reel for retracting the manually extended hose. The hose is usually equipped with a tire and tube inflator on discharge end. It may be used for air dusting by substituting air dusting gun for the tire and tube inflator.
- What is a Water Dispensing Reel And Hose Assembly? 47 Items
- A Water Dispensing Reel And Hose Assembly (REEL AND HOSE ASSEMBLY,WATER DISPENSING) is a device primarily designed to supply automobiles, buses, motor trucks, and the like with water. It usually consists of mechanical spring or compressed air actuated reel for retracting the manually extended hose. The hose is equipped with a discharge control valve on service end.
- What is a Tire Tread Grooving Machine? 10 Items
- A Tire Tread Grooving Machine (GROOVING MACHINE,TIRE TREAD) is a device primarily designed to cut longitudinal and/or transverse grooves and/or slits in automobile, motor truck, and the like, tires (usually worn) for the purpose of minimizing skidding by increasing traction.
- What is a Vehicle Lubricating Platform? 14 Items
- A Vehicle Lubricating Platform (PLATFORM,VEHICLE LUBRICATING) is a metal and/or wood structure, for use in the field, consisting primarily of two parallel wheel accommodating surfaces which provide a ramp and horizontal runway. It may be used for other maintenance operations.
- What is a Tire Inflation Safety Guard? 46 Items
- A Tire Inflation Safety Guard (GUARD,SAFETY,TIRE INFLATION) is a cage type enclosure, consisting of frame members welded to a base plate, for inclosing a large size tire and rim assembly during inflation of the tire. It is designed for the protection of personnel in the event of a blowout.
- What is a Multiposition Maintenance Fixture Holder? 61 Items
- A Multiposition Maintenance Fixture Holder (HOLDER,MAINTENANCE FIXTURE,MULTIPOSITION) is a device having a stationary or adjustable base with movable arm(s) for affixing maintenance fixtures to hold items in convenient working positions. It is commonly used for benchwork and may be free standing. For items which include maintenance fixtures, see MAINTENANCE FIXTURE (as modified).
- Jack,Dolly Type,Pneumatic 42 Items
- What is a Pneumatic Tire Bead Expanding Constrictor? 44 Items
- A Pneumatic Tire Bead Expanding Constrictor (CONSTRICTOR,BEAD EXPANDING,PNEUMATIC TIRE) is a device used to apply pressure about the tread circumference of a tubeless pneumatic tire, causing the tire beads to expand against the wheel rim to form an airtight seal. It consists of either an air, hydraulic, screw, or friction force contracted band, or of a confined, inflatable, circular tube, inside which the tire is placed for application of pressure.
- Cutter Bit,Boring Machine,Connecting Rod 23 Items
- What is a Cylinder Assembly Valve Removing And Installing Stand? 11 Items
- A Cylinder Assembly Valve Removing And Installing Stand (STAND,VALVE REMOVING AND INSTALLING,CYLINDER ASSEMBLY) is a cylindrical shaped post, rounded on top, mounted on a flat base, usually square and usually made of wood. Used to hold an engine cylinder assembly while the valves are being removed or installed.
- What is an Electric Valve Seat Grinding Machine? 23 Items
- An Electric Valve Seat Grinding Machine (GRINDING MACHINE,VALVE SEAT,ELECTRIC) is a motor driven grinding machine that utilizes an abrasive wheel, designed for precision grinding and refinishing of internal combustion engine valve seats. It consists essentially of a base, upright and grinding supports, work holder, electric motor(s), spindle(s), grinding head(s), gage(s), and any necessary accessories such as diamond dressers and abrasive wheel sets. It usually has a coolant system for wet grinding and it may be portable (disassembled in container base) for ease of transportation. Excludes GRINDING KIT, VALVE SEAT, ELECTRIC.
- What is a Single Drive Vehicle Chassis Dynamometer? 16 Items
- A Single Drive Vehicle Chassis Dynamometer (DYNAMOMETER,VEHICLE CHASSIS,SINGLE DRIVE) is a mechanical device used to test motor vehicle performance by placing the vehicle's driving wheels on drive rollers and simulating actual driving load conditions. Consists of all, or part of the following components: instrument cabinet, chassis, engine cooling system, and auxiliary idler rolls. Excludes DYNAMOMETER, RUN-IN.
- What is a Tire Tread Buffing Rasp? 19 Items
- A Tire Tread Buffing Rasp (RASP,BUFFING,TIRE TREAD) is a rotating tool used for removing rubber from the tread area in preparation to recapping and repairing automotive pneumatic tires. It may have such mounting facilities as a threaded hole or an arbor hole for application on flexible shaft or arbor mounted machines. Tools may be solid steel with integral teeth in rows forming a spiral from the top to the bottom, or disk shaped hubs constructed to accommodate removable teeth segments, or tack inserted bands.
- What is a Radiator And Engine Block Flushing Gun? 19 Items
- A Radiator And Engine Block Flushing Gun (GUN,FLUSHING,RADIATOR AND ENGINE BLOCK) is a gun type flushing and reverse flushing device utilizing compressed air and water. For use on motor vehicle radiators and engine blocks. See also CLEANING AND FLUSHING MACHINE, AUTOMOTIVE COOLING SYSTEM.
- What is a Pneumatic Tire Bead Breaker? 68 Items
- A Pneumatic Tire Bead Breaker (BEAD BREAKER,PNEUMATIC TIRE) is a hand-operated leverage device designed to loosen tire beads from a wheel rim for tire removal. It consists of a base-mounted upright which serves as a fulcrum for an attached lever arm from which a leg with a shoe is suspended. When the wheel and tire assembly is positioned flat on the base with the shoe against the upper side of the tire at the rim, downward pressure on the lever arm forces the tire bead to break away from the wheel rim. See also DEMOUNTER, PNEUMATIC TIRE.
- What is a Transmission And Differential Lift? 78 Items
- A Transmission And Differential Lift (LIFT,TRANSMISSION AND DIFFERENTIAL) is a caster mounted device designed primarily for removing and/or replacing automotive vehicle transmissions and differentials. It may be of the type designed for use with vechicle elevated on LIFT, MOTOR VEHICLE or of the type designed for use with vehicle standing on floor.
- What is a Cylinder Compression Tester Adapter? 207 Items
- A Cylinder Compression Tester Adapter (ADAPTER,CYLINDER COMPRESSION TESTER) is an item used to adapt the stem of a TESTER, CYLINDER COMPRESSION to various size automotive spark plug ports. It may be a threaded type to fit a designated spark plug port or a universal type designed to accommodate a range of sizes. It may be fastened to the tester stem by means of a quick change or threaded connector.
- What is a Spark Plug Cleaner Adapter? 21 Items
- A Spark Plug Cleaner Adapter (ADAPTER,SPARK PLUG CLEANER) is a moulded item usually of rubber designed to accommodate a designated size spark plug in a CLEANER, SPARK PLUG. Excludes ADAPTER, SPARK PLUG TESTER.
- What is a Hoisting Link? 187 Items
- A Hoisting Link (LINK,HOISTING) is a rigid item which is less than three times as long as it is high. It includes an eye(s), ring(s), hole(s), loop(s), or the like, to facilitate hoisting and is designed to permit attaching such items as sling legs, shackles, rods, and hooks at two or more points. May include mounting hardware such as bolts, screw, washers and the like. Excludes SPREADER, SLING. See also BEAM, HOISTING. Do not use if a more specific name applies, such as RING, CONNECTING, ROUND and LINK, CHAIN, END.
- What is a Brake Drum Centering Cone? 24 Items
- A Brake Drum Centering Cone (CONE,CENTERING,BRAKE DRUM) is a conical shaped item (actually a frustum of a cone) with either a stepped, tapered (cone) or spool (one end must be smaller than the other) shaped silhouette between ends, used for aligning a brake drum, on a brake drum lathe, during the turning and/or grinding process. It may fasten to the drum with studs when the drum is without a center bearing.
- What is an Ignition Timing Piston Position Indicator? 19 Items
- An Ignition Timing Piston Position Indicator (INDICATOR,PISTON POSITION,IGNITION TIMING) is an item used for indicating crankshaft angle with relation to top dead center for ignition and valve timing purposes and synchronizing timing of dual ignition systems. Usually consists of a body, head, pivot arms and scales, test lead wires, and a case. Excludes INDICATOR, SCALE.
- What is a Tachometer-Dwell Test Set? 37 Items
- A Tachometer-Dwell Test Set (TEST SET,TACHOMETER-DWELL) is a set of one or more instruments, used for measuring the distributor cam dwell on internal combustion engines employing battery distributor ignition systems, and as a tachometer to measure the revolutions per minute of both battery distributor and magneto ignition system type engines. Excludes TACHOMETER, ELECTRONIC; TACHOMETER, STROBOSCOPIC; TACHOMETER, ELECTRIC, NONSELF-GENERATING and TACHOMETER, VIBRATING REED.
- What is a Tire And Tube Testing Tank? 13 Items
- A Tire And Tube Testing Tank (TANK,TESTING,TIRE AND TUBE) is a water-filled tank in which pneumatic tire inner tubes and wheel mounted or rim mounted tubeless tires are submerged, either manually or mechanically, for the visual detection of air leaks.
- What is a Diesel Injector Test Set? 34 Items
- A Diesel Injector Test Set (TEST SET,DIESEL INJECTOR) is a fixture or group of fixtures specifically designed to test the serviceability of injectors for various types of diesel fuel engines. It may have provisions for testing individual components of the injectors and may include hand tools and equipment to perform limited maintenance operations. Excludes TOOL KIT (1), DIESEL INJECTOR.
- What is a Truck Mounting Hoisting Unit? 14 Items
- A Truck Mounting Hoisting Unit (HOISTING UNIT,TRUCK MOUNTING) is a group of items consisting of a chain hoist, towbar, and a hoist superstructure designed for mounting on a truck used for maintenance operations to pick up and/or tow vehicles. It may include mounting accessories.
- What is a Wheel Lift Trailer? 14 Items
- A Wheel Lift Trailer (TRAILER,LIFT,WHEEL) is a trailer equipped with hydraulic or mechanical lifting devices used in installation, removal, and transportation of wheels for aircraft, buses, trucks, and the like.
- What is an Armored Vehicle Turret Maintenance Stand? 69 Items
- An Armored Vehicle Turret Maintenance Stand (STAND,MAINTENANCE,ARMORED VEHICLE TURRET) is a metallic structure designed to support and hold armored vehicle turret(s) during overhauling and maintenance operations.
- What is an Automotive Vehicle Shop Equipment? 585 Items
- An Automotive Vehicle Shop Equipment (SHOP EQUIPMENT,AUTOMOTIVE VEHICLE) is a group of items consisting of tools, accessories, and equipment, such as brake drum lathe, tire demounter, brake and clutch reliner, transmission and differential lift, vulcanizer, and the like, required for complete automotive rebuild, maintenance and repair operations. See also SHOP EQUIPMENT (1), INTERNAL COMBUSTION ENGINE.
- Shop Equipment,Internal Combustion Engine 108 Items
- Shop Equipment,Motor Vehicle Assembling 22 Items
- Shop Equipment,Radiator 38 Items
- Parts Kit,Hydraulic Jack 39 Items
- What is a Vehicular Analyzer Set? 83 Items
- A Vehicular Analyzer Set (ANALYZER SET,VEHICULAR) is a self-contained portable test set designed for use in the automated testing of a complete vehicle, including all basic electrical, mechanical, and hydraulic subsystems. The set may be reprogrammable. Excludes-ANALYZER, IGNITION and VIBRATION, RECIPROCATING ENGINE and ANALYZER SET, ENGINE.
- What is a Vehicle Support Stand? 371 Items
- A Vehicle Support Stand (STAND,VEHICLE SUPPORT) is a metallic structure designed for use in pairs to be placed under the chassis of an automotive vehicle as stablizing safety devices when the vehicle is in a raised position. The base may be of various cross-sectional shapes with a center, usually rack-and-pawl type, central column having a saddle head and designed for height adjustment.
- What is a Cylinder Compression Tester Tool Kit? 19 Items
- A Cylinder Compression Tester Tool Kit (TOOL KIT,CYLINDER COMPRESSION TESTER) is a group of items with special tools used in conjunction with TEST, CYLINDER COMPRESSION.
- Stand Assembly,Lifting And Blocking,Vehicular 48 Items
- Fixture Assembly,Turbocharger 15 Items
- What is a Master Cylinder Bleeder Adapter? 22 Items
- A Master Cylinder Bleeder Adapter (ADAPTER,BLEEDER,MASTER CYLINDER) is an item specifically designed to be applied to the master cylinder for bleeding the complete brake system.
- Calibration Kit,Fuel Injector 13 Items
- Weldment Assembly,Overhaul Stand 35 Items
- Guide,Hose Reel 50 Items
- What is a Maintenance And Repair Shop Equipment Modification Kit? 58 Items
- A Maintenance And Repair Shop Equipment Modification Kit (MODIFICATION KIT,MAINTENANCE AND REPAIR SHOP EQUIPMENT) is an item or items employed to modify specially designed maintenance or repair shop equipments.
- Brake Pad Assembly,Engine Stand 13 Items
- What is a Vehicular Maintenance Kit? 1155 Items
- A Vehicular Maintenance Kit (MAINTENANCE KIT,VEHICULAR) is a maintenance kit for components of ground or tracked vehicles.
- What is a Vehicular Maintenance Fixture? 257 Items
- A Vehicular Maintenance Fixture (FIXTURE,VEHICULAR MAINTENANCE) is a fixture designed to be attached to vehicular components, such as engines, generators and the like to facilitate inspection, repair, and/or replacement of components.
- Stand,Maintenance,Automotive Transmission 44 Items
- What is a Tire Tread Grooving Machine Blade? 37 Items
- A Tire Tread Grooving Machine Blade (BLADE,GROOVING MACHINE,TIRE TREAD) is an item used in conjunction with a GROOVING MACHINE, TIRE TREAD and designed for cutting treads on new smooth-tread tires and also for regrooving original treads.
- What is a Vehicular Wheel Balancer Adapter? 52 Items
- A Vehicular Wheel Balancer Adapter (ADAPTER,BALANCER,VEHICULAR WHEEL) is an item used both for centering and mounting a wheel on a BALANCER, VEHICULAR WHEEL.
- What is a Final Drive Assembly Alignment Fixture? 76 Items
- A Final Drive Assembly Alignment Fixture (ALIGNMENT FIXTURE,FINAL DRIVE ASSEMBLY) is a fixture designed specifically to align and/or position interfacing components of a vehicular final dirve assembly, such as a gear box transmission or a drive shaft.
- What is a Clutch Slider Shoe Holding Fixture? 11 Items
- A Clutch Slider Shoe Holding Fixture (HOLDING FIXTURE,SLIDER SHOE,CLUTCH) is a specially designed metallic item designed to maintain proper postioning of clutch slider shoe assembly during removal and assembly operations.
- What is a Vehicle Automatic Washer? 20 Items
- A Vehicle Automatic Washer (WASHER,AUTOMATIC,VEHICLE) is a power-driven unit consisting of various configurations of brushes and/or scrubbers, and soap and water application systems. Designed to automatically remove dirt from the exterior of automotive vehicle bodies. May include facilities for dispensing wax or drying air.
- What is a Test Set Accessory Kit? 53 Items
- A Test Set Accessory Kit (ACCESSORY KIT,TEST SET) is an accessory kit containing two or more supplemental items, such as attentuators, dummy loads, BRIDGE, IMPEDANCE, isolation transformers, and the like which are necessary to perform test and/or perform maintenance procedures on a piece of equipment or a system in conjunction with a TEST SET, (as modified).
- What is an Automotive Engine And Transmission Test Stand? 64 Items
- An Automotive Engine And Transmission Test Stand (TEST STAND,AUTOMOTIVE ENGINE AND TRANSMISSION) is a test stand designed for evaluating the performance and/or operational characteristics of and making adjustments and/or repairs to automotive type engine and transmission assemblies.
- What is a Dust And Moisture Seal Protective Cover? 20 Items
- A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
- What is a Diesel Engine Exhaust Analyzer? 35 Items
- A Diesel Engine Exhaust Analyzer (ANALYZER,DIESEL ENGINE EXHAUST) is an item designed to determine the concentration of solid particles in the exhaust gas of diesel engines. The meter readings are displayed and recorded. Hearing protection and storage box may be included. See also ANALYZER,GASOLINE ENGINE EXHAUST.
- What is an Automotive Engine Maintenance Stand Subassembly? 84 Items
- An Automotive Engine Maintenance Stand Subassembly (STAND SUBASSEMBLY,MAINTENANCE,AUTOMOTIVE ENGINE) is a part of a STAND (1), MAINTENANCE, AUTOMOTIVE ENGINE which is designed to enable various maintenance works on combustion engines of vehicles.
- What is a Nonelectronic Mechanic's Stethoscope? 10 Items
- A Nonelectronic Mechanic's Stethoscope (STETHOSCOPE,MECHANIC'S,NONELECTRONIC) is an instrument that locates any engine sound for trouble such as bearing noise, knocks, squeals, from the fan, water pump, valve tappets, and the like. An amplifying diaphragm and a flexible tube are included to reach any inaccessible machine or motor parts. It may also be used on other mechanical equipment.
- What is a Brake Support Plate Adjusting Tool? 16 Items
- A Brake Support Plate Adjusting Tool (ADJUSTING TOOL,PLATE,BRAKE SUPPORT) is a special metallic arc shaped tool utilized during maintenance procedures for replacement/adjustment of brake shoes to preclude damaged brake parts and inoperative brake self-adjusters. Excludes ADJUSTING TOOL, BRAKE SHOE.
- What is a Vehicular Component Testing Safety Guard? 14 Items
- A Vehicular Component Testing Safety Guard (GUARD,SAFETY,COMPONENT TESTING,VEHICULAR) is an item used for the protection of the testing personnel, when testing hydraulic, pneumatic, electric, or similar components such as valves, pumps, hoses, operating cylinders, engines and the like in hydraulic, pneumatic and electric systems.
- What is a Vehicle Suspension Installation And Removal Tool? 56 Items
- A Vehicle Suspension Installation And Removal Tool (INSTALLATION AND REMOVAL TOOL,VEHICLE SUSPENSION) is an item specifically designed to assist in attaching and detaching components such as springs, shock absorbers, and the like.
- What is an Automotive Power Train Assemblies Maintenance Stand? 31 Items
- An Automotive Power Train Assemblies Maintenance Stand (STAND,MAINTENANCE,AUTOMOTIVE POWER TRAIN ASSEMBLIES) is a supporting structure designed for assembling, disassembling vehicular engine/transmission/ transfer gearbox/differential/transaxle assemblies or subassemblies during maintenance operations. See also STAND, MAINTENANCE, AUTOMOTIVE AXLE; STAND, MAINTENANCE, AUTOMOTIVE ENGINE; and STAND, MAINTENANCE, AUTOMOTIVE TRANSMISSION.
- What is a Battery Water Testing Conductivity Cell? 20 Items
- A Battery Water Testing Conductivity Cell (CONDUCTIVITY CELL,BATTERY WATER TESTING) is a plastic cuplike item consisting of a base to which five (5) standard spaced contractor pins are attached, two of the pins having platinum or platinum plated electrodes firmly attached thereto inside the cup. The cup is provided with a removable cap individually fitted to the inside diameter of same. Used as a component in a battery-water tester assembly to determine whether the water to be used in storage batteries has been contaminated.
- What is a Motor Vehicle Engine And Transmission Sling? 152 Items
- A Motor Vehicle Engine And Transmission Sling (SLING,ENGINE AND TRANSMISSION,MOTOR VEHICLE) is an item designed for use on specific type(s) of engine(s) and transmission(s).
- What is an Electric And Hydraulic System Components Test Stand? 22 Items
- An Electric And Hydraulic System Components Test Stand (TEST STAND,ELECTRIC AND HYDRAULIC SYSTEM COMPONENTS) is a cabinetlike item usually with a front work area and consisting of the necessary instrumentation and mechanical and electrical facilities for component mounting. Designed to simultaneously test efficiency of packaged hydraulic pressure and electric power generating equipment. Component under test is equipped with self-contained power source. Excludes TEST STAND, HYDRAULIC SYSTEM COMPONENTS.
- What is a Hydraulic Pumping Unit Test Stand? 15 Items
- A Hydraulic Pumping Unit Test Stand (TEST STAND,HYDRAULIC PUMPING UNIT) is a cabinetlike item with a front work area and consisting of the necessary instrumentation and facilities for testing a PUMPING UNIT, HYDRAULIC, (as modified). The item is not designed for mounting components under test. Excludes TEST STAND, HYDRAULIC SYSTEM COMPONENTS.
- What is a Pneumatic System Components Test Set? 33 Items
- A Pneumatic System Components Test Set (TEST SET,PNEUMATIC SYSTEM COMPONENTS) is an item designed specifically for making examinations of pneumatic system components, such as valves, pressure regulators, accumulators, hose lines, pressure switches, and the like. May include facilities for checking pneumatic systems for leakage and performance. See also TEST SET, LEAKAGE, GUIDED MISSILE DRAINAGE EQUIPMENT.
- What is a Hydraulic System Components Test Set? 81 Items
- A Hydraulic System Components Test Set (TEST SET,HYDRAULIC SYSTEM COMPONENTS) is an item or collection of items designed specifically for making examinations of hydraulic system components, such as valves, pressure regulators, accumulators, hose lines, pressure switches, and the like. May include favilities for checking hydraulic systems for leaks and performance. See also TEST SET, LEAKAGE, GUIDED MISSILE DRAINAGE EQUIPMENT, OR TEST SET, PNEUMATIC SYSTEM COMPONENTS.
- What is an Axle Hydraulic Jack? 39 Items
- An Axle Hydraulic Jack (JACK,HYDRAULIC,AXLE) is a single lifting device consisting of a actuated by air over hydraulic pump, mounted on a base which has casters or the like for mobility. Excludes JACK, DOLLY TYPE, HYDRAULIC and JACK DOLLY TYPE, PNEUMATIC.
- What is an Engine Analyzer? 78 Items
- An Engine Analyzer (ANALYZER,ENGINE) is an instrument capable of performing two or more diagnostic tests on the exhaust, ignition, electrical, and the like, systems of a gasoline or diesel engine. Connecting and test cables may be included. See also METER, MULTIPLE SCALE and MULTIMETER.
- What is a Hand Operated Hydraulic System Filler And Bleeder? 26 Items
- A Hand Operated Hydraulic System Filler And Bleeder (FILLER AND BLEEDER,HYDRAULIC SYSTEM,HAND OPERATED) is a combination of storage tank(s), filters, switches, gages, hoses, and fittings sufficient to service a hydraulic system. The power for moving the hydraulic fluid is provided by a hand pump. May include hose racks or reels, and related plugs, caps, tools and miscellaneous hardware.
- What is a Power Operated Hydraulic System Filler And Bleeder? 45 Items
- A Power Operated Hydraulic System Filler And Bleeder (FILLER AND BLEEDER,HYDRAULIC SYSTEM,POWER OPERATED) is a combination of storage tank(s), filters, switches, gages, hoses, and fittings sufficient to service a hydraulic system. The power for moving the hydraulic fluid is provided by compressed air or mechanical pump. May include a compressor, motor, engine, pump, hose racks or reels, and related plugs, caps, tools and miscellaneous items.
- What is a Specialized Parts Kit? 24 Items
- A Specialized Parts Kit (PARTS KIT,SPECIALIZED) is use of this name is restricted to the support of DLA's kitting project.
- What is a Jack Support Platform? 27 Items
- A Jack Support Platform (SUPPORT PLATFORM,JACK) is an item, usually square in shape, made of various materials and designed to be placed under a SHOE, JACK-SUPPORT or the like, providing additional support and helping to prevent the SHOE, JACK-SUPPORT from sinking into the ground or surface upon which it is placed. A handle(s) may be included on item to aid in carrying and placement. Excludes: SHOE, JACK.
Stock Items From Supply Class 4910 Page 35of 91
- 211117156
- A339
- RNCC: 3 | RNVC: 2
- Z339
- RNCC: 5 | RNVC: 2
- 151454926
- 491015C000110
- RNCC: 3 | RNVC: 2
- 151736459
- MC0108/03
- RNCC: 3 | RNVC: 2
- (241)A3460MC0108/03
- RNCC: 3 | RNVC: 2
- 123896684
- LE-MCNDPR01
- RNCC: 3 | RNVC: 2
- 660601298
- WCA6262
- RNCC: 3 | RNVC: 2
- W3WCA6262
- RNCC: 5 | RNVC: 9
- 218617437
- 2504
- RNCC: 3 | RNVC: 2
- C19A
- RNCC: 3 | RNVC: 2
- G504
- RNCC: 5 | RNVC: 9
- 142472112
- A122487A
- RNCC: 3 | RNVC: 2
- A122487
- RNCC: 5 | RNVC: 2
- 145586453
- 82405302000
- RNCC: 3 | RNVC: 2
- 145158902
- 12701011
- RNCC: 3 | RNVC: 2
- 226011687
- 002221
- RNCC: 3 | RNVC: 2
- 142458033
- NO PRIMARY REF14-245-8033
- RNCC: 3 | RNVC: 2
- V22-10054
- RNCC: 5 | RNVC: 9
- 144939876
- NO PRIMARY REF14-493-9876
- RNCC: 3 | RNVC: 2
- N38-6
- RNCC: 5 | RNVC: 9
- F300 0T 014 9246
- RNCC: 6 | RNVC: 9
- 151715127
- CHIAVE STARTER BETA MOD.BT83-11X
- RNCC: 1 | RNVC: 2
- 143246721
- 330311
- RNCC: 3 | RNVC: 2
- MA1040
- RNCC: 5 | RNVC: 2
- 998269492
- FV1051741
- RNCC: 3 | RNVC: 2
- 113149ST
- RNCC: 5 | RNVC: 2
- 123829785
- F6554433
- RNCC: 3 | RNVC: 2
- 152180047
- SISTEMACONTROLLOGOMME
- RNCC: 5 | RNVC: 3
- 151854792
- U0,70M
- RNCC: 3 | RNVC: 2
- 151733769
- 5600374
- RNCC: 1 | RNVC: 2
- 151763327
- ART3223
- RNCC: 3 | RNVC: 2
- 144915858
- 10270CO
- RNCC: 3 | RNVC: 2
- F300 0T 003 5329
- RNCC: 6 | RNVC: 9
- 991728975
- NO PRIMARY REF 99-172-8975
- RNCC: 3 | RNVC: 2
- M22543-DA3020
- RNCC: 5 | RNVC: 2
- DA3020
- RNCC: 5 | RNVC: 2
- 226048437
- 188130095
- RNCC: 3 | RNVC: 2
- 151993353
- RUG2PSGHV206-0105
- RNCC: 3 | RNVC: 2
- (241)A424999367805
- RNCC: 5 | RNVC: 2
- 99367805
- RNCC: 5 | RNVC: 2
- 144939764
- NO PRIMARY REF14-493-9764
- RNCC: 3 | RNVC: 2
- 0578104500000001
- RNCC: 5 | RNVC: 9
- F300 0T 014 8970
- RNCC: 6 | RNVC: 9
- 270199625
- 5325002766091-K
- RNCC: 2 | RNVC: 1
- 270198457
- 5330000546963-K
- RNCC: 2 | RNVC: 1
- 270198953
- 5325006230928-K
- RNCC: 2 | RNVC: 1
- 145068040
- L2ABV202M
- RNCC: 3 | RNVC: 2
- L2ABV202M
- RNCC: 5 | RNVC: 9
- 85-694-8448
- RNCC: 6 | RNVC: 9
- 226143900
- 530A1
- RNCC: 3 | RNVC: 2
- 160025193
- SUBSTITUTE RN 0089740000114
- RNCC: 3 | RNVC: 9
- 578112540100
- RNCC: 5 | RNVC: 9
- 151905421
- RAPIDM0L
- RNCC: 3 | RNVC: 2
- 226175893
- 2300436-99018-000-0
- RNCC: 3 | RNVC: 2
- 171218197
- PN016783-06
- RNCC: 3 | RNVC: 2
- 251374713
- STOETTEBUKK
- RNCC: 5 | RNVC: 2
- 151455246
- 491015C000118
- RNCC: 3 | RNVC: 2
- 151733986
- 605G121D
- RNCC: 1 | RNVC: 2
- 144116653
- 226446
- RNCC: 3 | RNVC: 2
- 121711699
- 1684483005
- RNCC: 3 | RNVC: 9
- EFAW106-8
- RNCC: 5 | RNVC: 9
- 219002519
- 8383462-1
- RNCC: 3 | RNVC: 2
- 992520068
- V5851-9
- RNCC: 3 | RNVC: 2
- 145615759
- S 4708-1
- RNCC: 3 | RNVC: 2
- 994414650
- NTS10248
- RNCC: 3 | RNVC: 2
- 5G5284
- RNCC: 6 | RNVC: 9
- 144575219
- 103002
- RNCC: 3 | RNVC: 2
- 144492112
- SEF6115
- RNCC: 3 | RNVC: 9
- 91605490
- RNCC: 5 | RNVC: 2
- 144910565
- BRUECK136
- RNCC: 3 | RNVC: 2
- F300 0T 001 3000
- RNCC: 6 | RNVC: 9
- 142472105
- A121832
- RNCC: 3 | RNVC: 2
- 100041
- RNCC: 5 | RNVC: 2
- 151993372
- 99367826
- RNCC: 3 | RNVC: 2
- (241)A424999367826
- RNCC: 5 | RNVC: 2
- 123132992
- DRV 01
- RNCC: 3 | RNVC: 2
- 152088180
- 10147
- RNCC: 5 | RNVC: 3
- 143193222
- 330382
- RNCC: 3 | RNVC: 2
- MA1401
- RNCC: 5 | RNVC: 2
- 997828149
- 2605301020199631
- RNCC: 3 | RNVC: 2
- 123698400
- 100160
- RNCC: 3 | RNVC: 2
- 994021830
- 84
- RNCC: 3 | RNVC: 2
- 16C6450
- RNCC: 6 | RNVC: 9
- 997692047
- AM 20906/300
- RNCC: 3 | RNVC: 2
- 151515759
- 99366710
- RNCC: 3 | RNVC: 2
- 151245337
- 1874140001
- RNCC: 3 | RNVC: 2
- 152167382
- 6230001101
- RNCC: 5 | RNVC: 3
- 151378399
- 3078/81
- RNCC: 3 | RNVC: 2
- 151562977
- 99340033
- RNCC: 3 | RNVC: 2
- 151932008
- 1200 EUR
- RNCC: 3 | RNVC: 2
- 996704671
- K121007/3
- RNCC: 3 | RNVC: 2
- 010Z7-046
- RNCC: 6 | RNVC: 9
- 221244846
- TR-0857E
- RNCC: 2 | RNVC: 2
- 131148227
- 20.206-1/212
- RNCC: 3 | RNVC: 2
- 660373101
- 126358
- RNCC: 3 | RNVC: 2
- 226206885
- FL200-2
- RNCC: 3 | RNVC: 2
- 270198570
- 5330008163546-K
- RNCC: 2 | RNVC: 1
- 152336801
- FAS03
- RNCC: 3 | RNVC: 2
- 491015E023683
- RNCC: 5 | RNVC: 9
- 661517941
- DE251500003
- RNCC: 3 | RNVC: 2
- 998265652
- FV1030059
- RNCC: 3 | RNVC: 2
- 92LM213
- RNCC: 5 | RNVC: 2
- 998386403
- 18G1299
- RNCC: 3 | RNVC: 2
- 998264201
- FV1051731
- RNCC: 3 | RNVC: 2
- 35527J
- RNCC: 5 | RNVC: 2
- 144995164
- 35653191
- RNCC: 3 | RNVC: 2
- 3-565319-1
- RNCC: 5 | RNVC: 9
- F300 0T 023 0912
- RNCC: 6 | RNVC: 9
- 997778856
- CP14408/1
- RNCC: 3 | RNVC: 2
- FV1069351
- RNCC: 6 | RNVC: 9
- 219094856
- S51663
- RNCC: 4 | RNVC: 1
- 151453914
- 491015C000045
- RNCC: 3 | RNVC: 2
- 144116746
- 408519
- RNCC: 3 | RNVC: 2
- 991751572
- FAC0456/569001
- RNCC: 3 | RNVC: 2
- FV2304873
- RNCC: 5 | RNVC: 2
- RJ525
- RNCC: 6 | RNVC: 9
- 993045293
- LFS302804-01A
- RNCC: 3 | RNVC: 2
- 997900229
- 125/00549
- RNCC: 3 | RNVC: 2
- 151732126
- 20003TAURUS
- RNCC: 1 | RNVC: 2
- 152114444
- EX1710RP4200826
- RNCC: 5 | RNVC: 3
- 270198549
- 5330007374502-K
- RNCC: 2 | RNVC: 1
- 270198499
- 5330002920570-K
- RNCC: 2 | RNVC: 1
- 144425243
- J23987-B
- RNCC: 3 | RNVC: 9
- AEDJ23987-B
- RNCC: 5 | RNVC: 9
- 998264039
- D3915-63C
- RNCC: 3 | RNVC: 2
- 992737917
- VW2024A
- RNCC: 3 | RNVC: 2
- 800.1.56.008.1
- RNCC: 5 | RNVC: 2
- 041AN-011
- RNCC: 6 | RNVC: 9
- 218961103
- J 28593-100
- RNCC: 3 | RNVC: 2
- 270147659
- 5K90689
- RNCC: 2 | RNVC: 1
- A 436 583 00 47
- RNCC: 2 | RNVC: 1
- 270198535
- 5330005992934-K
- RNCC: 2 | RNVC: 1
- 218841475
- J8763-02
- RNCC: 3 | RNVC: 2
- 375133379
- K9DTE32001
- RNCC: 3 | RNVC: 2
- K9DTE32001
- RNCC: 5 | RNVC: 2
- 123234857
- 150585-30276-08
- RNCC: 3 | RNVC: 2
- R910
- RNCC: 5 | RNVC: 9
- 4910-30276
- RNCC: 5 | RNVC: 9
- 4910-30276
- RNCC: 6 | RNVC: 9
- 660936042
- RVR4702
- RNCC: 3 | RNVC: 2
- 390002901
- NOMIM 3949101036
- RNCC: 2 | RNVC: 2
- AP.VERIF.SI UMFLAT PNEURI,AVUP
- RNCC: 5 | RNVC: 2
- 270478766
- BM-4500
- RNCC: 2 | RNVC: 1
- 218671815
- A962-135
- RNCC: 3 | RNVC: 2
- 151249416
- 3371/1-125
- RNCC: 3 | RNVC: 2
- 375044253
- 60041200
- RNCC: 3 | RNVC: 2
- 60041200
- RNCC: 5 | RNVC: 2
- 145705600
- 82622532000
- RNCC: 3 | RNVC: 2
- 270199896
- 5330007378908-K
- RNCC: 2 | RNVC: 1
- 144466819
- ST406M71P11E299
- RNCC: 3 | RNVC: 2
- 331582146
- AC750
- RNCC: 3 | RNVC: 2
- 997824409
- VP5008
- RNCC: 3 | RNVC: 2
- 144995330
- 35670392
- RNCC: 3 | RNVC: 2
- 3-567039-2
- RNCC: 3 | RNVC: 2
- F300 0T 023 2238
- RNCC: 6 | RNVC: 9
- 123919959
- 0684200703
- RNCC: 3 | RNVC: 2
- 270198496
- 5330002913291-K
- RNCC: 2 | RNVC: 1
- 151864375
- 1650610
- RNCC: 3 | RNVC: 2
- 151268304
- A8540
- RNCC: 3 | RNVC: 2
- 145711761
- 82636261000
- RNCC: 3 | RNVC: 2
- 170379319
- LEKBAKB0Z0LIELAADSLANG80X60X30CM
- RNCC: 3 | RNVC: 2
- 151905336
- CRT100-800
- RNCC: 3 | RNVC: 2
- 994020299
- NO PRIMARY REF 99-402-0299
- RNCC: 3 | RNVC: 2
- VVF89
- RNCC: 5 | RNVC: 2
- 16C2323
- RNCC: 6 | RNVC: 9
- 151396277
- 227
- RNCC: 3 | RNVC: 2
- (241)A4319227
- RNCC: 5 | RNVC: 2
- DA227
- RNCC: 5 | RNVC: 2
- 145016216
- AE2G08
- RNCC: 3 | RNVC: 2
- F300 0T 016 9405
- RNCC: 6 | RNVC: 9
- 145713212
- RLB8
- RNCC: 3 | RNVC: 2
- RLB8
- RNCC: 5 | RNVC: 2
- 00037301
- RNCC: 5 | RNVC: 2
- RLB8
- RNCC: 5 | RNVC: 2
- RLB8
- RNCC: 5 | RNVC: 2
- 143961917
- 030605
- RNCC: 3 | RNVC: 2
- 6010-030605
- RNCC: 5 | RNVC: 2
- 143022645
- NO PRIMARY REF14-302-2645
- RNCC: 3 | RNVC: 2
- 1418DAJA0
- RNCC: 5 | RNVC: 9
- 142508070
- NO PRIMARY REF14-250-8070
- RNCC: 3 | RNVC: 2
- SUPERF0RAX3-220V
- RNCC: 5 | RNVC: 9
- 145015666
- FUC SEA 2072-21
- RNCC: 3 | RNVC: 2
- 39013.3/EATSEA/NTI1AEB
- RNCC: 5 | RNVC: 2
- 152147557
- EX4910RI3204961
- RNCC: 3 | RNVC: 2
- 151613597
- 469085
- RNCC: 3 | RNVC: 2
- 121818003
- 1X56 136 515
- RNCC: 3 | RNVC: 2
- 1X56136515
- RNCC: 5 | RNVC: 2
- 81.66850-6012
- RNCC: 5 | RNVC: 2
- 81668506012
- RNCC: 5 | RNVC: 2
- 998030088
- NO PRIMARY REF 99-803-0088
- RNCC: 3 | RNVC: 2
- L83071
- RNCC: 5 | RNVC: 9
- LV3RRL83071
- RNCC: 6 | RNVC: 9
- LV6MT291784
- RNCC: 6 | RNVC: 9
- 145687604
- 82603972000
- RNCC: 3 | RNVC: 2
- 375570663
- SPCT-100V
- RNCC: 5 | RNVC: 1
- 992066201
- NO PRIMARY REF 99-206-6201
- RNCC: 3 | RNVC: 2
- GMC58939
- RNCC: 5 | RNVC: 2
- 809200
- RNCC: 5 | RNVC: 2
- 660826251
- RBC4-16-10
- RNCC: 3 | RNVC: 2
- 992161409
- OE-C-14107
- RNCC: 3 | RNVC: 2
- 144910579
- BRUECK62
- RNCC: 3 | RNVC: 2
- F300 0T 001 3014
- RNCC: 6 | RNVC: 9
- 996963592
- 11668406
- RNCC: 3 | RNVC: 2
- CV177171
- RNCC: 5 | RNVC: 2
- 151502312
- ARTIGLIO-BASIC
- RNCC: 3 | RNVC: 2
- 151515770
- 99366725
- RNCC: 3 | RNVC: 2
- 218921371
- S34-50HZ
- RNCC: 3 | RNVC: 2
- S34 CRES 82-74-50MS
- RNCC: 5 | RNVC: 9
- 992050202
- NO PRIMARY REF 99-205-0202
- RNCC: 3 | RNVC: 2
- 6401-549
- RNCC: 5 | RNVC: 2
- HF152
- RNCC: 5 | RNVC: 2
- 661593453
- TQ2019
- RNCC: 3 | RNVC: 2
- 200045901
- S49344
- RNCC: 4 | RNVC: 1
- 144668532
- 535142
- RNCC: 3 | RNVC: 2
- 91629005
- RNCC: 5 | RNVC: 2
- 123806462
- 8832230341
- RNCC: 3 | RNVC: 2
- 144953397
- 5001007757
- RNCC: 3 | RNVC: 2
- F300 0T 019 0924
- RNCC: 6 | RNVC: 9
- 123206394
- GXO-U020
- RNCC: 3 | RNVC: 2
- 812.572
- RNCC: 5 | RNVC: 9
- 997482771
- 7188BH
- RNCC: 3 | RNVC: 2
- 151455124
- 491015C000117
- RNCC: 3 | RNVC: 2
- 221126051
- 161A
- RNCC: 3 | RNVC: 2
- 87-9023-1-161
- RNCC: 5 | RNVC: 9
- 332031418
- U 0941
- RNCC: 3 | RNVC: 2
- 270199870
- 5330007402030-K
- RNCC: 2 | RNVC: 1
- 270199687
- 2520007983058-K
- RNCC: 2 | RNVC: 1
- 999086820
- 5706-2300
- RNCC: 3 | RNVC: 2
- LE5706-2300
- RNCC: 5 | RNVC: 2
- 0128Z-021
- RNCC: 6 | RNVC: 9
- 270198523
- 5330005798108-K
- RNCC: 2 | RNVC: 1
- 270198586
- 5935009810365-K
- RNCC: 2 | RNVC: 1
- 121891571
- 2300109-990260.000.0
- RNCC: 2 | RNVC: 2
- 2300109-990260.000.0
- RNCC: 3 | RNVC: 2
- 2300109-990260-000-0
- RNCC: 3 | RNVC: 2
- 2300109-990260-000-0
- RNCC: 3 | RNVC: 2
- 2300109-990260.000.0
- RNCC: 3 | RNVC: 2
- 4910121891571
- RNCC: 5 | RNVC: 2
- 2300109-990260-000-0
- RNCC: 5 | RNVC: 2
- 145590127
- 724731
- RNCC: 3 | RNVC: 2
- 152122188
- EX4910RI4825383
- RNCC: 3 | RNVC: 2
- 270095103
- MOD3400
- RNCC: 2 | RNVC: 1
- MODEL3400
- RNCC: 2 | RNVC: 1
- 144517734
- 533089
- RNCC: 3 | RNVC: 2
- 270568591
- 57RS403278
- RNCC: 2 | RNVC: 1
- 375197937
- HL-26K
- RNCC: 3 | RNVC: 2
- 999960218
- K121015
- RNCC: 3 | RNVC: 2
- 0117V-002
- RNCC: 6 | RNVC: 9
- 123265477
- 312.56.510
- RNCC: 3 | RNVC: 2
- 151754437
- SCM904S6
- RNCC: 3 | RNVC: 2
- 226236869
- 203 630
- RNCC: 3 | RNVC: 2
- 660104304
- CB158-11R
- RNCC: 3 | RNVC: 2
- 998075724
- NO PRIMARY REF 99-807-5724
- RNCC: 3 | RNVC: 2
- KBQ100000
- RNCC: 5 | RNVC: 2
- (241)AE095KBQ100000
- RNCC: 8 | RNVC: 2
- KBQ100000
- RNCC: 8 | RNVC: 2
- 144983693
- 91958308
- RNCC: 3 | RNVC: 2
- BRUECK77-78-79-82-83
- RNCC: 5 | RNVC: 2
- F300 0T 004 9630
- RNCC: 6 | RNVC: 9
- 152348091
- POLARIS-311
- RNCC: 3 | RNVC: 2
- 270248856
- 5-06-00610
- RNCC: 2 | RNVC: 1
- 121300049
- J3-70-1
- RNCC: 3 | RNVC: 2
- D70C
- RNCC: 5 | RNVC: 2
- E932
- RNCC: 5 | RNVC: 9
- 4910-50000
- RNCC: 6 | RNVC: 9
- 144055884
- R.H.P. 20
- RNCC: 3 | RNVC: 9
- RASR.H.P. 20
- RNCC: 5 | RNVC: 9
- 121889994
- 9021.005
- RNCC: 3 | RNVC: 2
- 090 785
- RNCC: 5 | RNVC: 2
- 9021-005
- RNCC: 5 | RNVC: 9
- 090785
- RNCC: 5 | RNVC: 9
- 270578456
- CV72355-CT13826
- RNCC: 2 | RNVC: 1
- 998081226
- NO PRIMARY REF 99-808-1226
- RNCC: 3 | RNVC: 2
- 7144-664D
- RNCC: 5 | RNVC: 9
- 997218330
- MP300
- RNCC: 3 | RNVC: 2
- 010Z7-006
- RNCC: 6 | RNVC: 9
- 994332674
- C01092/0001M001
- RNCC: 3 | RNVC: 2