4820-01-311-9514

Disk Retainer 1102-1RNCC: 3 | RNVC: 2 | DAC: 51100 ITEM 5RNCC: 5 | RNVC: 2 | DAC: 5 7 Dec 1989 4820-01-311-9514

4820-25-106-9432 4820251069432 251069432 is a valve with a bolt or stem that may be mechanically actuated to two different positions by rotary or linear motion. in the first position, the valve disk is located and locked against the seat permitting no fluid flow through the valve. in the second position, one side of the valve disk is located against the seat permitting movement of the disk in a manner that will allow a flow of fluid in one direction through the valve. the valve disk may be spring loaded. it may be inline or cartridge (manifold) design. see also valve (1), lift-check and valve (1), stop-lift-check.

5970-14-357-6181 5970143576181 143576181 is a rigid or flexible tubing having other than uniform fabricated shapes or forms. it is specifically designed to prevent any undesirable flow of current between conductors or between conductors and other objects. includes shrinkable type items. excludes items not having rated electrical characteristics. also excludes bushing, sleeve; cable nipple, electrical; and insulation sleeving, electrical.

5306-00-982-3619 5306009823619 009823619 BOLT,SHEAR

5306-00-720-7984 5306007207984 007207984 is a high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.