4820-01-297-5686

3527 Special Shaped Actuator Valve Diaphragm 39193-2161-1RNCC: 3 | RNVC: 2 | DAC: 5 2 Nov 1989 4820-01-297-5686

5960-00-526-6690 5960005266690 005266690

5821-14-526-6690 5821145266690 145266690 is a receiver used for reception of radio frequency electromagnetic waves transmitted through space exclusive of countermeasure, facsimile, loran, radar, television, and other specialized systems.

6145-37-526-6690 6145375266690 375266690 is a single metallic conductor of solid, stranded, or tinsel construction, designed to carry current in an electrical circuit. it may be a bare or insulated, may have metalic covering sheath, shield or and additional jacket. refers to bulk quantities only. for items that are solid or stranded, insulated or uninsulated, and have the chemical composition specified but no conductivity (electrical properties) see wire,(as modified), includes litz wire and insulated/uninsulated armored, and ground wire. excludes braid, wire; fuse wire; resistance wire and magnet wire.

5310-99-526-6690 5310995266690 995266690 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.