4820-01-275-2470

| RNVC: 9 | DAC: 5 1 Dec 1984 4210-00-454-7515 https//www.nsnlookup.com /fsg-48/fsc-4820/us 4820-01-275-2470
Pilot Subassembly Valve 4820012752470,9035-4 Datasheet 4820-01-275-2470 CharacteristicSpecificationsFIIGA23900End

5305-22-282-0692 5305222820692 222820692 is an externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). no. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. see also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.

5962-01-416-4149 5962014164149 014164149 is a microcircuit specifically designed to generate, modify, or process electrical signals which operate with two distinct or binary states. these states are commonly referred to as on and off, true and false, high and low, or "1" and "0".

5310-99-552-3615 5310995523615 995523615 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

enable JavaScript in your web browser . 4730-21-910-1363Male/Female Adapter4730219101363 219101363 9035-4