4820-00-007-4588

5365-12-313-1845 5365123131845 123131845 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.

4820-01-315-8200 4820013158200 013158200 is a valve specifically designed to automatically maintain a predetermined discharge flow rate which may be adjustable within a specific range. it is designed to be used with various fluids and may be preset and/or adjustable. it may be in-line or cartridge (manifold) design. excludes valve, regulating, feed water; valve, regulating, fluid pressure; valve, regulating, fuel oil; valve, regulating, oil pressure, automatic pilot; vavle, regulating, temperature; valve, angle; and valve, globe.

4820-12-195-0699 4820121950699 121950699 is a valve permitting flow in one direction only. it does not have a stem, except when equipped with a lever and weight and has no pressure adjustment. it may be inline or cartridge (manifold) design.