4820-99-629-2581

enable JavaScript in your web browser . 9905-15-220-4574Cartello Obbligator9905152204574 152204574 3003M
Documents 9905-15-220-4574 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-48/fsc-4820/uk 4820-99-629-2581
Plug Cock 4820996292581 996292581,3003M instructions how to enable JavaScript in your web browser

Documents 9330-00-889-7776 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-48/fsc-4820/uk 4820-99-629-2581
Plug Cock 4820996292581 996292581,3003M -526-8764Plug Cock4820995268764 995268764 3003M https//

5365-00-131-8651 5365001318651 001318651 is a tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. it is designed to maintain a predetermined distance between assembled parts. the item may be with or without flange(s) of any peripheral shape. the overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (when the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). for items having other than a round or hexagon peripheral shape, see spacer, plate. excludes items with lubricating features, see bearing, sleeve and bushing, sleeve. see also bushing, tapered; spacer, ring; washer, flat; and washer, (as modified).

5365-00-165-7797 5365001657797 001657797 is an item with a cylindrical shaped body having external threads other than pipe or hose series. it is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. it may have a head and/or internal drive and may contain a bleeder hole. see also plug, protective, dust and moisture seal and cap-plug, protective, dust and moisture seal. excludes plug, tube fitting, threaded.

5365-01-019-9323 5365010199323 010199323 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.