4820-14-537-7763

15-146-20105975151462010151462010 CUSTODIA MARCA https//www.nsnlookup.com /fsg-48/fsc-4820/fr 4820-14-537-7763
Safety Relief Valve 4820145377763 145377763 locate objectionable radio frequency disturbances.
6625-99-924-1533 Radio Frequency Interference Detector www.nsnlookup.com /fsg-48/fsc-4820/fr 4820-14-537-7763

Documents 6625-99-924-1533 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-48/fsc-4820/fr 4820-14-537-7763
Safety Relief Valve 4820145377763 145377763 2010 5975151462010 151462010 CUSTODIA MARCA TELE https

5865-01-049-7999 5865-01-032-1234 6625-01-146-2010 https//www.nsnlookup.com /fsg-48/fsc-4820/fr 4820-14-537-7763
Safety Relief Valve 4820145377763 145377763 1560-99-146-2010 1560991462010 991462010 CAP ANGLE

1560-99-146-2010 1560991462010 991462010 CAP ANGLE

5365-12-146-2010 5365121462010 121462010 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.