4820-14-477-4985

/www.nsnlookup.com /nato/nato-stock-numbers/inc Valve Subplate Assembly (INC 39712) Sep 2005 4820-14-477-4985

2010 4820-14-547-0442 Valve Subplate Assembly 10292376001RNCC: 3 | RNVC: 2 | DAC: 4 17 Sep 2005 4820-14-477-4985

5310-66-143-3104 5310661433104 661433104 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5940-12-143-3104 5940121433104 121433104

5940-12-143-3104 5940121433104 121433104 is a terminal designed to be affixed, usually at one end, to a post, stud, chassis, or the like for mounting. it has provisions for attachment of wire(s) or similar electrical conductor(s) in order to establish an electrical connection and could require the use of tool(s) for attachment of wire. for post like terminals, see terminal stud. excludes clip, electrical; terminal, quick disconnect and terminal feedthru.